Instruction Manual
1.8in ZIF LIF to Single Compact Flash SSD Adapter Card
ZIF2CF
Compact Flash
Connector
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
ZIF/LIF Connector
Packaging Contents
• Compact Flash to ZIF/LIF Adapter
• Instruction Manual
ZIF/LIF Pin #1
Marker
*actual product may vary from photos
Installation
WARNING! Computer equipment can be severely damaged by static electricity. Be sure that you are properly grounded before opening
your computer case or touching your hard drive. StarTech.com recommends that you wear an anti-static strap when installing any
computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds. Be sure to handle your hard drive carefully and consult your hard
drive and laptop manufacturer for details on how to remove the drive.
WARNING! The ZIF2CF adapter does not support hot-swapping. Please ensure that the host computer is powered down when connecting
or disconnecting the Compact Flash card to or from the adapter. Similarly, please ensure that the host computer is powered down when
connecting/removing the adapter, when a Compact Flash card is connected to the adapter.
Please note: To simplify installation, power down the computer or ZIF/LIF device into which the adapter will be installed, and remove the
existing ZIF/LIF device.
1. With the Compact Flash card label facing upward (visible), align the holes on the connector end of the
Compact Flash card you wish to install, with the pins provided by the by ZIF2CF adapter.
2. Apply gentle pressure to the Compact Flash card, until the pins provided by the adapter are fully inserted
into the adapter connector holes.
3. Gently, lift the brown lever from the ZIF/LIF connector on ZIF2CF, and insert the ZIF/LIF cable from the
device/computer into the ZIF2CF ZIF/LIF connector, such that Pin #1 on the the ZIF/LIF cable is aligned
with Pin #1 on the ZIF/LIF connector provided by the ZIF2CF adapter (denoted by white arrow).
Manual Revision: 10/28/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
|