Model 8664/8665/8668
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
®
This Inter-Tel user guide is released by Inter-Tel, Inc. as a guide for end-users. It provides infor-
mation necessary to use the Model 8664/8665/8668 endpoints. The contents of this user guide,
which reflect current Inter-Tel standards, are subject to revision or change without notice. Some
features or applications mentioned may require a future release and are not available in the initial
release. Future product features and applications are subject to availability and cost. Some features
or applications may require additional hardware and/or specific software.
Some system features can only be accessed by an
administrator. For information about these features, see the
Frequently Asked Questions section on page 107.
For sales, service, or technical support,
contact your local authorized Inter-Tel provider.
Comments about this user guide or other
technical documentation should be directed to
Inter-Tel’s Technical Publications Department at:
All products and services mentioned in this publication are the trademarks, service marks, regis-
tered marks, or registered service marks of their respective owners.
®
®
®
®
®
Inter-Tel , Axxess , Enterprise , Unified Communicator , and CommSource are registered
trademarks of Inter-Tel, Incorporated.
®
SpectraLink is a registered trademark of SpectraLink Corporation.
®
®
Microsoft and Outlook are registered trademarks of Microsoft Corporation.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT DISPOSAL INSTRUCTIONS
This symbol indicates that the product is classified as electrical or
electronic equipment and should not be disposed of with other com-
mercial or household waste at the end of its working life. For appropri-
ate disposal and recycling instructions, contact your local recycling
authority or Inter-Tel provider.
The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the
European Union to minimize negative impact on the environment, control hazardous substances, and curtail
landfill expansion by using the best available recovery and recycling techniques.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
IMPORTANT INFORMATION
®
The following information is provided by SpectraLink , the manufacturer of the
Model 8664, 8665, and 8668 wireless IP endpoints. Detailed information about how
to use the Model 8664, 8665, and 8668 wireless IP endpoints are described through-
out the guide
•
It is recommended that standard acceptance procedures be followed prior to oper-
ating this equipment in proximity of life-support systems.
•
To minimize risk of interference, pacemaker users should not carry the endpoint
next to the pacemaker.
•
•
Earpiece may retain magnetic objects.
Operation of the endpoint may produce an audible noise noticeable to hearing aid
users. It is recommended that a hearing aid compatible headset be used by hear-
ing aid users..
WARNING: Changes or modifications to this equipment not approved by Spec-
traLink may cause this equipment to not comply with part 15 of the FCC rules and
void the user’s authority to operate this equipment.
WARNING: SpectraLink products contain no user-serviceable parts inside. Refer
servicing to qualified service personnel.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE CONCERNING THE WIRELESS TELEPHONES
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RADIO FREQUENCY (RF) INFORMATION
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the follow-
ing measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or supplier for help.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or supplier for help.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL WARNINGS
For Vehicles Equipped with an Air Bag: Do not place a portable radio product in
the area over the air bag or in the air bag deployment area. An air bag inflates with
great force. If a portable radio is placed in the air bag deployment area and the air bag
inflates, the radio product may be propelled with great force and cause serious injury
to occupants of the vehicle.
Potentially Explosive Atmospheres: Turn off your radio product, prior to entering
any area with a potentially explosive atmosphere, unless it is a radio product type
especially qualified for use in such areas (for example, Factory Mutual Approved).
Do not remove, install, or charge batteries in such areas. Sparks in a potentially explo-
sive atmosphere can cause an explosion or fire resulting in bodily injury or even
death.
The areas with potentially explosive atmospheres referred to
above include fueling areas such as below decks on boats, fuel or
chemical transfer or storage facilities, areas where the air con-
tains chemicals or particles, such as grain, dust or metal pow-
ders, and any other area where you would normally be advised
to turn off your vehicle engine. Areas with potentially explosive
atmospheres are often but not always posted.
Batteries: All batteries can cause property damage and/or bodily injury, such as burns
if a conductive material such as jewelry, keys, or beaded chains touches exposed ter-
minals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
Cleaning and Drying Considerations: Using a leather carry case may help protect
the surfaces and help prevent liquids (e.g., rain) from entering into the interior of the
radio product. This product is not waterproof, and exposing the unit to liquids may
result in permanent damage to the unit.
If your Wireless Telephone interior gets wet, then do not try to accelerate drying with
the use of an oven or a dryer as this will damage the Wireless Telephone and void the
warranty. Instead, do the following: 1. Immediately power off the Wireless Telephone.
2. Remove battery pack from Wireless Telephone. 3. Shake excess liquid from Wire-
less Telephone. 4. Place the Wireless Telephone and battery pack in an area that is at
room temperature and has good airflow. 5. Let the Wireless Telephone and battery
pack dry for 72 hours before reconnecting the battery pack and/or powering on the
Wireless Telephone. If the Wireless Telephone does not work after following the steps
listed above, contact your dealer for servicing information.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRO MAGNETIC INTERFERENCE/
COMPATIBILITY
NOTE: Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic
compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your
radio product in any facility where posted notices instruct you to do so. Hospitals or
health care facilities may be using equipment that is sensitive to external RF energy.
Medical Devices
Pacemakers: The Health Industry Manufacturers Association recommends that a min-
imum separation of 6 inches (15 cm) be maintained between a handheld wireless
radio product and a pacemaker. These recommendations are consistent with the inde-
pendent research by, and recommendations of, Wireless Technology Research. Per-
sons with pacemakers should:
•
ALWAYS keep the radio product more than 6 inches (15 cm) from their pace-
maker when the radio product is turned ON.
•
•
•
Not carry the radio product in a breast pocket.
Use the ear opposite the pacemaker to minimize the potential for interference.
Turn the radio product OFF immediately if you have any reason to suspect that
interference is taking place.
Hearing Aids: Some digital wireless radio products may interfere with some hearing
aids. In the event of such interference, you may want to consult your hearing aid man-
ufacturer to discuss alternatives.
Other Medical Devices: If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded from external RF
energy. Your physician may be able to assist you in obtaining this information.
Use While Driving
Check the laws and regulations on the use of radio products in the area where you
drive. Always obey them. When using the radio product while driving, please:
•
•
•
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving conditions
so require.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Country
Mark and/or number
Taiwan
United States
United States
IEC 60950
Part 15, part 68
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC ABSORBTION RATE (SAR) INFORMATION
Your wireless handheld portable telephone is a low power radio transmitter and
receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.
In August 1996, the Federal Communications Commissions (FCC) adopted RF expo-
sure guidelines with safety levels for hand-held wireless phones. Those guidelines are
consistent with the safety standards previously set by both U.S. and international stan-
dards bodies:
•
•
ANSI C95.1 (1992) American National Standards Institute
NCRP - Report 86 (1986) National Council on Radiation Protection and Mea-
surements
•
•
ICNIRP (1996) International Commission on Non-Ionizing Radiation Protection;
DHWC - Safety Code 6 Department of Health and Welfare Canada
Those standards were developed by independent scientific organizations through peri-
odic and thorough evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and
health. The exposure standard for wireless mobile phones employs a unit of measure-
ment known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6W/kg. Tests for SAR are conducted using standard operating positions speci-
fied by the FCC with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power output. Before a phone
model is available for sale to the public, it must be tested and certified to the FCC that
it does not exceed the limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model. While there may be differ-
ences between the SAR levels of various phones and at various positions, they all
meet the government requirement for safe exposure. The FCC has granted an Equip-
ment Authorization for this model phone with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID IYGSNP2400 or
IYGRNP2400. Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association (CTIA) web site at
http://www.wow-com.com.
The only authorized headsets that may be utilized with the SNP2400 or RNP2400 are
those obtainable from SpectraLink or it's reseller partners.
The measured SAR of the SNP2400 Wireless Telephone is
0.61W/kG @ 2462 MHz (head) 0.0379W/kG @ 2412 MHz (body).
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
The measured SAR of the RNP2400 Wireless Telephone is
0.166W/kG @ 2462 MHz (head) 0.0162W/kG @ 2412 MHz (body).
Phone Operation Normal Position: Hold the phone as you
would any other telephone, with the earpiece to your ear and
speak into the microphone. The internal antenna is then posi-
tioned properly.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
FINDING YOUR WAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Your Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About Operating Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About Battery Packs and Chargers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
About Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
What You See and Hear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Turning Your Endpoint On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Locking and Unlocking the Keypad on Your Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting Up Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Making and Receiving Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Placing Calls On Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Placing Conference Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using Reverse Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Forwarding Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Displaying Information on Your Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using the Mute Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using the Message Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessing Your Mailbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Disabling and Enabling ASR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Accessing Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using Do-Not-Disturb Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Using Reminder Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
©Inter-Tel, Inc. March 2006 printed in US
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
MOVING ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting Endpoint Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting Mailbox Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Changing Volume Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Returning to Default Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Speed Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Using Record-A-Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Performing a “Hookflash” During a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Programming Softkeys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Using Account Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Screening Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Using Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Programming Remote Feature Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Requesting Agent Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Working in Hunt Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Using the Push-to-Talk Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
USING E-MAIL READER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
E-Mail Reader Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Using Your Advanced Mailbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Setting Up Your E-Mail Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Accessing E-Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Using Main Menu E-Mail Reader Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Accessing Fax Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Recovering Deleted Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Changing Message Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Voice Mail Flowchart (Advanced Mailbox) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
LEARNING MORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
What the Administrators Can Do for You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Frequently Asked Questions (FAQs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Default Feature Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding Your Way
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Your Endpoint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Model 8664. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Model 8665. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Feature Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display and Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Function Button and Softkeys . . . . . . . . . . . . . . . . . . . . . . . . 10
Line Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
About Operating Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About Battery Packs and Chargers . . . . . . . . . . . . . . . . . . . . . . 13
Quad Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Important Notes about Chargers and Battery Packs . . . . . . . 19
About Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Enterprise Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Automatic Speech Recognition (ASR) . . . . . . . . . . . . . . . . . . 23
What You See and Hear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1
WELCOME
Your new Model 8664/8665/8668 endpoint provides access to several features, each
of which is described in this guide. The About This Guide section below lists the dif-
ferent sections in this user guide and describes the type of information you can find
there. Because the Models 8664, 8665, and 8668 function almost identically, the
information in this user guide applies to all endpoints unless otherwise indicated.
The About This Guide section below lists the different sections in this user guide and
describes the type of information you can find there.
ABOUT THIS GUIDE
This guide contains instructions for using the Model 8664, 8665, and 8668 wireless IP
®
endpoints on the Inter-Tel telephone system. To help you find information quickly,
this guide is divided into five separate sections, as indicated by the tabs.
These sections include the following:
•
•
Finding Your Way: This section provides you with a picture of the Model 8664,
8665, and 8668 endpoints and includes general information designed to help you
find what you need.
Getting Started: This section includes basic endpoint and voice mail informa-
tion, and provides instructions on how to perform everyday tasks, such as
answering calls, making calls, and using voice mail.
•
•
•
Moving On: In this section you’ll learn how to use advanced endpoint and voice
mail features.
advanced messaging features available with E-Mail Reader.
Learning More: This section outlines how your administrators can help if you
experience a problem with your endpoint. It also provides you with a list of Fre-
quently Asked Questions (FAQs) so you can troubleshoot problems and learn
more about the system.
In addition, this guide contains a list of default feature codes (see page 110) and an
index (see page 115) for easy reference.
NOTE: Because the telephone system is very flexible and programmable, the proce-
dures for using the features might vary slightly from the descriptions in this guide. If so,
your trainer or system administrator can tell you how your system differs and how to
use the features.
®
Inter-Tel Model 8664/8665/8668 User Guide
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT YOUR ENDPOINT
Your Model 8664/8665/8668 endpoint is equipped with several features that allow
you to perform various functions. These features include:
•
•
•
Liquid Crystal Display (LCD): Shows call, system, and feature information.
Dialpad Buttons: Allow you to enter numbers, letters, and special characters.
Feature Buttons: Allow you to power the endpoint on and off, switch modes,
select a line, and access endpoint features.
•
•
Softkeys: Allow you to quickly access frequently used features and functions
Battery Pack and Charger: Charges the battery and provides several hours of
active talk time.
General Care
Follow these guidelines to care for your wireless endpoint:
•
•
•
•
It is recommended that you keep your wireless endpoint in idle mode (see
page 12) and always return it to the charger when you are not using it.
Contact your system administrator if your endpoint needs servicing. Do not disas-
semble your endpoint. Doing so will void your warranty.
Avoid dropping the endpoint or knocking it against hard surfaces. Carrying the
endpoint in a holster or carrying case may help protect it.
Wiping the endpoint surface with a water-dampened cloth or paper towel will
remove most films or residues. Be sure to turn off the wireless endpoint and
unplug the charger before cleaning them.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Model 8664
The illustration below displays the external components of the Model 8664 endpoint.
Earpiece
Volume Buttons
Up
Display
Select
Down
Softkeys
Power Off/End Call
Power On/Start Call
Menu
Dialpad
Function
Line
Microphone
Charging Contacts
Headset Jack
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Model 8665
The illustration below displays the external components of the Model 8665 endpoint.
Earpiece
Display
Volume Buttons
Up
Select
Down
Softkeys
Power On/Start Call
Menu
Power Off/End Call
Dialpad
Function
Line
Microphone
Charging Contacts
Headset Jack
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Model 8668
The illustration below displays the external components of the Model 8668 endpoint.
Earpiece
Volume Buttons
Up
Display
Select
Down
Softkeys
Power Off/End Call
Power On/Start Call
Menu
Dialpad
Line
Function
Microphone
Charging Contacts
Headset Jack
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Status Indicators
To indicate various states, your endpoint uses icons and sounds. The table below lists
the endpoint’s status indicators and explains what each indicator means.
INDICATOR
STATUS
If the endpoint cannot receive or place calls, an alarm sounds and a message
is displayed. The in-service tone indicates when service has been re-estab-
lished.
No Service
If your receive the No Service message, you may be outside of the covered
area. Return to the coverage area. If the endpoint still does not function, note
the error message and contact your system administrator.
If the battery pack charge is low, the battery icon is displayed, and a soft beep
charge remaining.
If the battery is critically low, the endpoint displays the Battery low status and
an alarm sounds while the endpoint is idle. The endpoint cannot be used until
the battery pack is charged.
Battery Low
If you have a voice mail or station message, the message icon is displayed.
NOTE: This icon also indicates that the endpoint is in alpha mode when
inputting information text for DND messages (see page 52) and using the
directories (see page 79).
The line indicators are associated with line access keys. In the preceding dia-
gram, line 1 is active.
1ꢀꢀꢀꢀꢀꢀꢀ
A left or right arrow is displayed when the screen can be toggled either left or
right to display more characters as described above.
Up and down arrows are displayed when the menu has additional options
above or below what is shown in the display area.
The battery icon indicates the amount of charge remaining in the battery
pack. The level indications are approximations of the remaining battery pack
life. They do not indicate equal amounts of battery pack Life. When only one
level remains, the battery pack needs to be charged.
The signal strength icon indicates the strength of the signal and can assist
the user in determining if the endpoint is moving out of range.
The download icon indicates that the endpoint is downloading code. This icon
only appears while the endpoint is running the over-the-air downloader. It
appears to the right of the Signal Strength icon in the same location as the
voice mail icon.
The Charge Complete melody is played when the endpoint is first powered
on after a completed charge.
Melody
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Feature Buttons
The feature buttons on your endpoint provide access to endpoint features and options.
The table below lists the various feature buttons on the endpoint and provides a brief
description of what you can do with them.
BUTTON
IF YOU...
YOU CAN...
Press
Power on the endpoint and make a call.
Press
Power off the endpoint, end a call, and place the
endpoint in idle mode.
Press
View options and access features using the menu.
MENU
FCN
FCN
Press
Press
Set endpoint preferences and access softkey func-
tions.
Select an intercom or outgoing line.
LINE
LINE
•
•
•
Up and Down Volume and Select Buttons: Increase, decrease, and save volume
levels (see page 66).
Push-to-Talk Button*: Broadcasts messages to other Push-to-Talk group mem-
bers (see page 88).
Battery Release Buttons*: Releases the battery pack from the endpoint (see
page 13).
*Model 8665 endpoint only.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Display and Menu Button
In addition to the various feature buttons, your endpoint contains a display that shows
information about status, modes, call information, and available features. When the
LINE
MENU
FCN
endpoint is in the active mode, pressing
,
, or
will bring up options on
the display. To access an option, press the number on your dialpad that corresponds to
the number on the display. While the four-line menu display is showing, all button
presses relate to the menu options only. To make a call, you must return to the two-
line display.
MENU
The
button allows you to toggle between the two- and four-line displays. For
example, the illustration below on the left shows what the two-line display looks like
MENU
when you are on an active IC call to Jane Jones. When you press
, the display
changes from the two-line informational display to the four-line menu option display.
1
To put your call to Jane on HOLD press
on your dialpad.
Two-Line Display
Four-Line Display
5
5
1 HOLD
3 TRANSFER
2
IC TO JANE JONES
CNF 4
5
7
TRANSFER-T-HLD
MUTE
>> 8
Because the display can only support 15 characters, you may see a few abbreviations.
The most commonly used abbreviations are provided in the table below.
ABBREVIATION
ACCT CODE
CNF
WORD/PHRASE
Account Code
Conference
DEST
Destination
DIR
Directory
DND
Do-Not-Disturb
Extension
EXT
MSG
Message
RCL
Recall
STN SPD
SYS SPD
TFR
Station Speed Dial
System Speed Dial
Transfer
TG
Trunk Group (a group of outside lines)
Trunk (an outside line)
TRNK
NOTE: The backlight comes on when any button is pressed or when there is an incom-
ing call. This light turns off after 10 seconds if another button is not pressed within that
period.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Function Button and Softkeys
FCN
Your endpoint has a
(Function) button that provides access to frequently used
features. To access the function features, the endpoint must be in active mode (see
FCN
page 12). Pressing
repeatedly scrolls through the softkey displays, and allows you
to view the sixteen available function features. To access a feature displayed on the
function menu, press the feature’s associated dialpad number or softkey. While the
four-line function display is showing, all button presses relate to the function options
only.
The following table lists the available function features and the default dialpad and
softkey buttons that are associated with the feature. For detailed instructions on how
to access the features listed, refer to the corresponding page number.
DIALPAD
BUTTON
FUNCTION
SOFTKEY
PG.
Place a call on Hold.
Hold
Msg
Mute
Fwd
Xfer
34
42
41
38
36
Access the Message menu or toggle between alpha/numeric mode.
Mute the microphone, or backspace.
Forward a call to another destination or voice mail, or forward space.
Transfer a call to another destination or voice mail.
1
2
3
4
5
6
7
8
9
0
Communicate with several different parties on one call.
Enable and disable Do-Not-Disturb mode.
Conf
35
52
DND
Redial an outside number or save the last number dialed.
View or access System Speed-Dial numbers.
View or access Station Speed-Dial numbers.
Redl
40
SySp
StSp
70
67
Access additional features using feature codes.
Access programmable buttons for specific features.
Feat
N/A
73
Pgm1vt
Pgm2
Pgm3
Pgm4
Pgm5
*
#
NOTE: Depending on how your telephone system is configured, you may need to use
the Feat softkey before you dial a feature code.
®
Inter-Tel Model 8664/8665/8668 User Guide
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Line Button
LINE
The Line button ( ) provides access to four CALL lines (1-4) and one IC line (5).
While the line display is showing, all button presses relate to the line options only.
After you select a line, the line number flashes at the top of the display.
Headset Jack
The Model 8664, 8665, and 8668 endpoints have a headset jack located next to the
charging pins on the bottom of the endpoint. To use a headset, plug the headset con-
nector into the headset jack. Once it is connected, audio is transferred to the headset.
NOTE: Operation of the wireless endpoint may produce an audible noise noticeable to
hearing aid users. It is recommended that a hearing aid-compatible headset be used by
hearing aid users.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
11
ABOUT OPERATING MODES
which is also the power-saving mode. If the display shows just the extension number,
the endpoint is in idle mode. While the endpoint is in idle mode, the various endpoint
features, functions, and menus are not available. To place the endpoint in idle mode
from the two-line display, press
(two presses are required from the four-line
display). If you press from the idle mode, the endpoint is powered off.
NOTE: You must place the endpoint in idle mode to charge the battery pack using the
desktop charger (see page 15) and dual charger (see page 16).
You must place the endpoint in active mode to place a call and access endpoint fea-
tures. When the endpoint is in active mode, the two- or four-line display is visible,
and the features, functions, and menus are available. Battery resources are required
whenever the endpoint is turned on whether in active or idle mode. To place the end-
MENU
point in active mode you can either press
or
while in idle mode.
CAUTION
To safeguard against accidental ring bursts in the user’s ear, the endpoint will only
ring when it is in idle mode. If the endpoint is in active mode (two or four-line dis-
play is visible) and you receive a call, the ring will not be audible, however, the
display will indicate that there is an incoming call. To prevent missed calls, and
to ensure that your endpoint’s battery pack is adequately charged, it is
strongly recommended that you return your endpoint to idle mode and place
it in the desktop charger or dual charger when you are not using it.
®
Inter-Tel Model 8664/8665/8668 User Guide
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT BATTERY PACKS AND CHARGERS
The Model 8664, 8665, and 8668 endpoints require a charged battery pack to operate.
The Nickel Metal Hydride (NiMH) rechargeable battery pack will need to be charged
periodically. A charged battery pack provides four hours of talk time or 80 hours of
idle time. To save battery power, it is recommended that you place the endpoint in
idle mode at the end of every call (see page 12).
The battery icon indicates the amount of charge remaining in the battery pack. The
level indications are approximations of the remaining battery pack life. They do not
indicate equal amounts of battery pack Life. When only one level remains, (
)
the battery pack needs to be charged. If you are on a call, you will hear a soft beep
through the earpiece every six seconds. You have 15-30 minutes of battery life left. If
the battery pack is critically low, and you are not on a call, the Low Battery message
is displayed, and a loud beep will sound. When the battery pack is critically low, the
endpoint will not work until the battery pack is charged.
At some point you may need to replace the battery pack for your endpoint.
NOTE: The battery pack can be changed while the call is still in progress. Do not press
End Call. Place call on Hold. Quickly remove the discharged battery and replace with a
charged battery, power on the endpoint, and press Start Call to resume the call in
progress.
To remove and replace the battery pack on the Model 8664 and 8668:
Press down on the latch on the battery pack to release the battery. The battery pack
releases outward and you can remove it from the endpoint. To replace the battery
pack, slide the lip of the battery pack into the bottom of the cavity and push the top of
the battery pack until it snaps into place.
To remove and replace the battery pack on the Model 8665:
Hold the endpoint in one hand with the keypad facing up. Press both battery pack
release buttons (on the left and right sides of the endpoint) at the same time. The bat-
tery pack will release downward. You may catch it with the palm of your other hand.
If the battery pack does not release, gently shake the endpoint while pressing both
release buttons. Do not pry.
NOTE: Improper disposal of battery packs can damage the environment. Contact your
system administrator for instructions on how to recycle or properly dispose of used bat-
tery packs.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
13
You can charge the endpoint’s battery pack using a desktop charger (Models 8664 and
8665), a dual charger (Models 8664, 8665, and 8668) or a quad charger (Models 8665
and 8668). The chargers require approximately one and one half to two hours to
charge the battery pack completely.
NOTE: Take care not to short the battery contacts on the battery pack with metal
objects such as coins, keys or paper clips. Shorting the contacts can cause permanent
damage.
NOTE: Battery packs are not interchangeable. The Model 8665 uses the distinctive
square model BPX100 battery pack. The battery packs for the Model 8664 and 8668
endpoints are the same rounded shape but different colors. The Model 8664 BPE100
battery pack is black, the Model 8668 BPN100 battery pack is steel blue.
ꢁ
ꢁ
ꢁ
Only use Inter-Tel battery packs with Inter-Tel endpoints.
Do not dip the battery pack in water or throw into fire.
Do not throw away the battery pack with your domestic waste. Take used battery
packs to an appropriate collection point for recycling or send them back to your supplier
or servicing agent.
®
Inter-Tel Model 8664/8665/8668 User Guide
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Charger
8664 Desktop Charger
8665 Desktop Charger
Overview
The desktop charger is a one-slot charger that comes in two models. Model 8664 is
designed to charge the 8664 endpoint or the 8668 endpoint. Model 8665 is designed
to charge the 8665 endpoint. The models are not interchangeable.
The desktop charger will only charge the battery pack if the endpoint is in idle mode
or if it is powered off. If you place the endpoint in the charger while it is in active
mode, the battery pack will not charge and the endpoint will continue to deplete the
battery.
The user must end any call in progress by pressing the
button on the endpoint
before placing the endpoint into the Desktop Charger. The endpoint may be off or in
idle mode during charging.
Full charging is accomplished in approximately one and a half hours.
Set up the Desktop Charger by first obtaining the appropriate Inter-Tel power supply
for the country or region. Place the Desktop Charger on a flat, horizontal surface. Plug
the power supply into the Desktop Charger and into an appropriate wall outlet.
NOTE: Make sure you are using the charger that is designed specifically for your end-
point. The chargers for the Model 8664, 8665, and 8668 endpoints are different sizes
and you must use the charger that is compatible with your endpoint.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
15
To use the desktop charger to charge the battery pack:
1. EITHER, Press
(once or twice depending on the current display) to place
the endpoint in idle mode.
OR, Press and hold
to power off the endpoint.
2. Place the endpoint into the desktop charger slot facing forward. If the endpoint
is placed correctly, the red indicator light will come on.
NOTE: The desktop charger’s indicator light will not come on if the charger is
empty, if it is not receiving power, or if the endpoint is seated incorrectly.
Charge Indicator
While the endpoint is charging in idle mode, it will display its extension number and
Charging…. The battery icon will show charging progress. The endpoint is fully
operational and will ring if called.
When the endpoint is charging while turned off, only Charging… will display and no
calls will be received. The dots will be racing during the charging cycle. It is normal
for the battery pack to become warm when charging.
Dual Charger
Dual Charger for Model 8664
Dual Charger for Model 8665
Overview
The dual charger is a two-slot desktop charger that comes in three models. Model
8664 is designed to charge the BPE100 battery pack in the Model 8664 endpoint and
a spare BPE100 battery pack; Model 8665 is designed to charge the BPX100 battery
pack in the Model 8665 endpoint and a spare BPX100 battery pack; Model 8668 is
designed to charge the BPN100 battery pack in the 8668 endpoint and a spare
BPN100 battery pack. The models are not interchangeable.
®
Inter-Tel Model 8664/8665/8668 User Guide
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up the dual charger by first obtaining the appropriate Inter-Tel power supply for
the country or region. Place the dual charger on a flat, horizontal surface and plug the
power supply into the dual charger and into an appropriate wall outlet.
You must end any call in progress by pressing the
key before placing it into the
dual charger. Do not remove the battery pack. The endpoint may be off or in idle
mode during charging.
Place the endpoint face forward into the dual charger front slot. Place a spare battery
pack in the rear slot, charging contacts down. The front slot takes charging prece-
dence; the battery pack in the rear slot will begin charging when the endpoint in the
front slot is fully charged or when the front slot is empty.
Indicator Light
When the endpoint or battery pack is seated correctly, the corresponding indicator
light will come on. A bright indicator means the battery pack is charging, a dim indi-
cator means the battery pack is waiting to charge. The indicator light will not come on
when the endpoint is incorrectly seated, the slot is empty or when the dual charger has
no power applied.
If the indicator light is off or flashing, it means the endpoint or battery pack is incor-
rectly seated. Remove the endpoint or battery pack and reinsert it. If the LED contin-
ues to blink or starts blinking at any time during the charging process, it indicates that
there is a problem with the battery pack that makes it unusable. Do not continue to
charge the battery pack. Dispose of it properly and do not attempt to use it in the end-
point. Do not attempt to open or repair a defective battery pack. Contact your service
representative for assistance.
The indicator light will turn off when charging is complete. Full charging is accom-
plished in approximately two hours for either slot.
Charging Indicator
While the endpoint is charging in idle mode, it will display its extension number and
Charging…. The battery icon will show charging progress. The endpoint is fully oper-
ational and will ring if called. When the endpoint is charging while turned off, only
Charging… will display and no calls will be received.
Charge Complete
When the endpoint is fully charged, Charge Complete will display. If the endpoint
has been turned off, the charge complete melody will play when it is turned on.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Quad Charger
Quad Charger for Model 8668
(shown with four empty charging bays)
Quad Charger for Model 8665
(shown with two empty charging bays)
Overview
The quad charger is designed to simultaneously charge four Nickel Metal Hydride
(NiMH) battery packs. It comes in two models. Model 8665 is designed to charge the
BPX100 battery pack for the 8665 endpoint. Model 8668 is designed to charge the
BPN100 battery pack for the 8668 endpoint.
Full charging is accomplished in approximately one and a half hours.
Set up the quad charger by first obtaining the appropriate Inter-Tel electrical supply
for the country or region. Place the quad charger on a flat, horizontal surface and plug
the power supply into the quad charger and into an appropriate wall outlet.
Indicator Light
Remove the battery pack from the endpoint and insert it into one of the four charging
bays so that the battery pack contacts meet the charging bay contacts. The LED above
the charging bay will turn on to indicate that charging is in progress. Complete charg-
ing occurs in one and a half to two hours.
When charging is complete, the LED will turn off. Lift the battery pack out of the
charging bay.
NOTE: A blinking light above the charging bay indicates that the battery pack is
not seated correctly or that the battery pack is unstable. Re-seat the battery. If the
light continues to blink, do not continue to charge the battery. Contact your system
administrator to order a new battery pack.
®
Inter-Tel Model 8664/8665/8668 User Guide
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notes about Chargers and Battery Packs
•
Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose
them to freezing temperatures or direct sunlight.
•
Do not place anything in the charger other than the endpoint. You might damage
the contacts. Bent contacts can keep the endpoint from charging.
•
•
•
•
•
•
It is normal for the battery pack to become warm when charging.
Only use Inter-Tel battery packs with Inter-Tel chargers.
Never use non-Inter-Tel charging units as they could damage the battery pack.
Only use the original plug-in power adapter for the chargers.
Do not dip the battery pack in water or throw into fire.
Do not throw away the battery pack with your domestic waste. Take used battery
packs to an appropriate collection point for recycling or send them back to your
supplier or servicing agent.
Replacement battery packs are available from your supplier or servicing agent.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
19
ABOUT VOICE MAIL
Voice mail is an application that is part of the Inter-Tel voice processing system.
Using voice mail, you and other callers can send and receive recorded messages from
any supported endpoint on the system. To use voice mail features, each user (or sub-
scriber) is assigned a mailbox, which usually corresponds to the extension number
assigned to your endpoint. You can, however, have an unassociated mailbox that does
not correspond to an extension. (Unassociated mailboxes are typically used for agents
or other personnel who don’t have a permanent office.)
With your mailbox, you can use personal or system greetings to let callers know if
you are out of town, on a call, etc. If a caller reaches your mailbox, they can leave a
sets up one or more “group lists” of mailboxes, you can send a message to a group of
people by entering one number instead of everyone’s individual mailbox number.
Inter-Tel voice mail systems support the following types of mailboxes:
•
Advanced Mailbox: If E-Mail Reader is enabled for your mailbox, you have
access to voice mail, e-mail, and fax messages in your mailbox. You can also cus-
See page 91 for information and instructions about using E-Mail Reader features.
For a voice mail flowchart for advanced mailbox users, see page 103.
•
Standard Voice Mailbox: This type of mailbox allows you to send and receive
sonal mailbox options. A standard voice mailbox does not allow you to access e-
mail and fax messages. For a voice mail flowchart for standard mailbox users,
see page 121.
®
NOTE: If you have the Enterprise Messaging (EM) voice mail system, you also have
access to advanced communication and messaging features such as E-Mail Reader
and Automatic Speech Recognition (ARS). For more information about EM, see
page 22.
®
Inter-Tel Model 8664/8665/8668 User Guide
20
Download from Www.Somanuals.com. All Manuals Search And Download.
The instructions for many voice mail tasks are identical for standard voice mailbox
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Initializing your mailbox (see page 27)
Recording your personal greetings (see page 28)
Accessing your mailbox (see page 44)
Disabling and enabling ASR (see page 45)
Accessing voice mail messages (see page 46)
Changing your mailbox password (see page 60)
Changing the call screening transfer method (see page 62)
Programming a fax destination (see page 63)
Changing the message search order (see page 63)
Programming remote messaging (see page 64)
Screening calls (see page 76)
Using the voice mail directory (see page 80)
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Enterprise Messaging
Enterprise Messaging (EM) is the Inter-Tel messaging system that uses industry-stan-
dard protocols for communication and messaging. EM unifies communication and
messaging by providing access to voice mail, fax, and e-mail messages in your mail-
box. The EM system provides voice mail users with the following advanced messag-
ing features:
•
Automatic Speech Recognition (ASR): ASR can be enabled for the entire sys-
tem or it can be enabled for specific applications (like voice mail) or mailboxes.
When ASR is enabled for your mailbox, you can issue spoken commands to navi-
gate the voice mail menus. ASR also allows subscribers and non-subscribers to
navigate automated attendant menus, call routing applications, and search the
directories. ASR can be enabled for standard voice mailboxes and advanced mail-
boxes (see page 20). For more information about ASR, see page 23.
•
sages from your mailbox. For e-mail messages, E-mail Reader uses Text-to-
Speech (TTS) capabilities included with EM to convert the text in an e-mail mes-
sage to a .wav file. For fax messages, E-Mail Reader announces the fax enve-
lope. If E-Mail Reader has been enabled for your mailbox, your voice mail, e-
mail, and fax messages are unified in one convenient location. For more informa-
tion and instructions about how to use E-Mail Reader features, see the Using E-
Mail Reader section, starting on page 91.
Consult your voice mail administrator to see if ASR and/or E-Mail Reader is enabled
for your mailbox.
NOTE: EM also includes Unified Messaging inbound and outbound faxing capabilities.
For information and instructions about Unified Messaging features, see Issue 2.3 of the
Unified Messaging User Guide, part number 550.8121.
®
Inter-Tel Model 8664/8665/8668 User Guide
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Speech Recognition (ASR)
Automatic Speech Recognition (ASR) is a feature available for systems using EM.
Because ASR is a very flexible feature, it can be enabled or disabled on several differ-
ent levels. When ASR is enabled for your mailbox, you can issue spoken commands
to navigate the voice mail menus. ASR also allows subscribers and non-subscribers to
navigate automated attendant menus, call routing applications, and search the directo-
ries using voice commands.
When you access voice mail, if you are given the option to say a command or press a
dialpad button to complete a task, then ASR is enabled for your mailbox. If you are
only prompted to press a dialpad button, ASR is not enabled for your mailbox. If your
mailbox is not ASR-enabled, you can still navigate the menus and perform tasks by
pressing the appropriate dialpad buttons when prompted by the system.
When using ASR, follow these guidelines for best results:
•
When completing a mailbox-related task, either say the command each time or
press the dialpad buttons each time.
•
Use the endpoint when issuing spoken commands. Your endpoint’s speaker can
pick up background noise and other sounds, which may cause the system to mis-
interpret a command.
•
•
Voice mail command words are shown on display endpoints. If your endpoint has
a display and you don’t hear the command word when the prompt is announced,
look at the display for the appropriate voice command.
When you use the dialpad buttons to complete a task, you are sometimes
#
prompted to press
to indicate to the system that you have finished entering
digits. It is not necessary to say “Pound” or “Hash” when using ASR. The silence
#
that follows your voice command replaces the
digit.
•
While you are recording a message, ASR is temporarily disabled, therefore you
cannot issue spoken commands to access options like pause and erase. If you
attempt to issue a spoken command while you are recording, your recording will
include the command you issued. To access the pause and erase options, you
must press the appropriate dialpad buttons.
•
•
•
You cannot use ASR to set up your e-mail password (see page 95). For security
reasons, you must enter your e-mail password characters by pressing the appro-
priate dialpad buttons. Entering passwords this way prevents others from over-
hearing your password.
If the system cannot interpret your voice commands for three consecutive
attempts, ASR is temporarily disabled by the system for the current call. You can
still complete tasks using the dialpad buttons; however, you will no longer be
prompted to say a command.
You can temporarily disable ASR for the current call by selecting option eight
from the main menu.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
23
WHAT YOU SEE AND HEAR
As you can see, your Model 8664/8665/8668 and telephone system come equipped
with many features. To help you understand what everything means, it is recom-
mended that you read the following information before you use your endpoint:
•
If you hear four fast tones or repeating fast tones (reorder tone), you have pressed
an invalid button combination, tried to select a restricted line, dialed a restricted
or invalid number, dialed too slowly between digits, or waited too long before
performing the next step. Hang up and try again.
•
•
•
Your telephone system may be programmed for one or two dial tones. Systems
with two dial tones have one for intercom calls and one for outside calls.
Many features “time out” if you wait too long before performing the next step. If
this happens, you must hang up and start over.
“Off-hook” means that your endpoint is ready to make a call. To go off-hook or
make a call, press and release
you to enter an extension number. “On-hook” means that the endpoint is not in
. You hear dial tone and the display prompts
use and you can receive calls. To go on-hook or to end a call, press and release
.
NOTE: You can receive calls on a second line when off hook.
SOFTWARE COMPATIBILITY
Depending upon which software version your telephone system is using, some of the
features included in this guide may not be available for your endpoint. Check with
your system administrator to see which software version your telephone system cur-
rently uses and if there are any features restrictions for your system.
Your Model 8664/8665/8668 is compatible with the following Inter-Tel software:
®
•
•
•
•
•
Inter-Tel 5000 system software v1.0 and later
®
Axxess system software v8.2 and later
®
Unified Communicator v2.1 and later
®
Enterprise Messaging v1.0 and later
®
SpectraLink NetLink SVP Server Vxxx.110 or later
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Disabling and Enabling ASR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Accessing Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . 46
Listening to Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Recovering Deleted Voice Mail Messages. . . . . . . . . . . . . . . 48
Recording and Sending Voice Mail Messages. . . . . . . . . . . . 49
Canceling Unheard Voice Mail Messages . . . . . . . . . . . . . . . 51
Using Do-Not-Disturb Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Using Reminder Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
25
INTRODUCTION
Now that you know what your Model 8664/8665/8668 endpoint can do, it’s time to
start using it. In this section, you’ll learn how to make and receive calls, transfer calls,
retrieve voice mail messages, and much more.
TURNING YOUR ENDPOINT ON AND OFF
The
as begin and end calls.
To turn the Model 8664/8665/8668 endpoint on:
and
buttons are used to power on and power off the endpoint as well
Press and hold
(the Power On button) for about one second. Two chirps will
sound. When the button is released, the in-service tone sounds and the extension num-
ber is displayed. The endpoint is now in idle mode and ready to receive calls.
NOTE: It is recommended that you keep your endpoint in idle mode (see page 12) and
always return it to the charger when you are not using it.
To turn the Model 8664/8665/8668 endpoint off:
While in idle mode press and hold
sound and the endpoint will turn off. The endpoint cannot be turned off during a call.
You must end the call before you can turn the endpoint off.
(the Power Off button). One chirp will
POINT
To unlock the keypad:
Press the Unlk softkey, then #. The autolock feature of the keypad is disabled by
default.
To activate autolock:
See “Keypad Autolock” on page 58.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
26
SETTING UP VOICE MAIL
To begin using your mailbox you will need to complete a few basic set-up procedures
to initialize your mailbox, customize your personal greetings, and record your voice
mail directory name.
All of the options used for voice mail features in this user guide are presented as
numeric entries which correspond to the voice prompts from the system. Although
MENU
, note that the display
option numbers DO NOT correspond to the numeric entries in these instruc-
tions. It is recommended that you follow the voice prompts and these instructions
NOTE: If your telephone system uses Enterprise Messaging (EM), your mailbox may
have the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled
for your mailbox, you have the option of issuing a spoken command or pressing a dial-
pad button. See page 23 for ASR guidelines.
ALSO: If your mailbox has E-Mail Reader enabled, you have an advanced mailbox.
See page 91 for information and instructions about using E-Mail Reader features.
Initializing Your Mailbox
To access voice mail, the first thing you need to do is initialize your mailbox. This
allows you to change the default password for your mailbox, record your name for the
company directories, and listen to the voice mail introduction.
To initialize your mailbox:
1. Press
.
2. Dial the voice mail extension number. (You hear the main menu.)
NOTE: If you don’t know what the voice mail extension number is, check with your
system administrator.
3. Say “Login” or press
4. Enter your mailbox number using the dialpad buttons.
to identify yourself as a subscriber.
*
5. Enter your default password using the dialpad buttons.
NOTE: Your mailbox number is your default password.
If you want a password, enter a new password using digits 0-9 (up to 12 digits),
#
and then press
password.
when you are done. The messaging system plays back your
#
If you do not want to use a password, just press
.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
27
3
6. Say “Accept” or press
to accept the entry or say “Erase” or press
to
#
erase and re-enter your password. The system prompts you to record your direc-
tory name.
7. After the tone, record your first and last name.
8. When prompted, do one of the following:
#
• Say “Accept” or press
• Say “Replay” or press
• Say “Append” or press
again to accept the name.
to replay the name you just recorded.
to add to your name.
1
2
3
• Say “Re-record” or press
to erase and re-record your name.
NOTE: The system then plays a prompt that introduces you to the basic voice mail
system features. You can skip this introduction by saying “Skip” or by pressing
#
, if desired.
Recording Your Personal Greetings
You can store two different personal greetings in your voice mailbox: a primary and
an alternate. You may change or choose to use either greeting at any time. You can
then select which greeting you want played when a caller reaches your voice mailbox.
Because the purpose of this greeting is to tell callers why they have reached your
voice mailbox, you should include the following information:
•
•
•
Whether or not you are in the office and where you can be reached
When you will be returning calls
For callers who do not wish to leave a message, how to exit voice mail (say
0
“Operator” or press
to return to the operator)
The following are some sample greetings to help you plan your message:
•
Primary Greeting: Hello, this is __________. I am either on another line or
away from my desk and cannot take your call at this time. If you need to speak to
someone immediately, please dial zero now. Otherwise, leave a detailed message,
and I will return your call as soon as possible. Thank you.
•
Alternate Greeting: Hello, this is __________. I will be away from the office
from day/date until day/date. If you need to speak to someone immediately,
please dial zero now. Otherwise, leave a detailed message, and I will return your
call when I return. Thank you.
You can also select the System Greeting if you do not want to record a primary or
alternate greeting. The system greeting states, “Mailbox number (xxxxx) is not avail-
able.” Depending on how your system is programmed, the system greeting may also
include, “After the tone, please record your message. When finished, you may hang
up to deliver the message or press pound for more options.”
®
Inter-Tel Model 8664/8665/8668 User Guide
28
Download from Www.Somanuals.com. All Manuals Search And Download.
To record/change your personal greeting:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
3. Say “Greeting” or press
4. Do one of the following:
to select the Personal Options Menu.
to record or change your personal greeting.
1
1
• Say “Primary” or press
• Say “Alternate” or press
• Say “System” or press
to record and/or enable your primary greeting.
to record and/or enable your alternate greeting.
to enable the system default mailbox greeting.
2
3
5. If you selected the system greeting option, hang up.
If you selected the primary or alternate greeting option, record your greeting
#
when prompted, then press
.
If you already have a primary or alternate greeting, it is played when you select
primary or alternate.
You can then do one of the following:
#
• Say “Accept” or press
• Say “Replay” or press
• Say “Append” or press
• Say “Erase” or press
• Say “Cancel” or press
to accept the greeting.
to replay the greeting.
, add to the greeting, and then press
to erase and re-record the greeting.
to exit without changing your greeting.
1
2
#
.
3
*
6. Press
to hang up.
Recording Your Voice Mail Directory Name
Your recorded name is used to identify you in the voice mail directory and to verify
your mailbox number when messages are addressed to you. Although you record your
name when you first initialize your mailbox, you can change it at any time.
To record your directory name:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
2
3. Say “Name” or press
4. Do one of the following:
• Say “Accept” or press
• Say “Replay” or press
• Say “Append” or press
• Say “Erase” or press
a tone, record your first and last name. Then say “Accept” or press
accept your recorded name.
5. Press to hang up.
. Your recorded name is played.
#
to accept your recorded name.
to replay your recorded name.
to add to your name.
to erase and re-record your name. When you hear
1
2
3
#
to
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
29
MAKING AND RECEIVING CALLS
Making and receiving calls is the basic purpose of any endpoint. With your endpoint,
you can make/receive intercom and outside calls as well as make emergency calls.
CAUTION
Consult your system administrator and your local Inter-Tel servicing company for
important information about dialing emergency services from your Model 8664/
8665/8668 before you begin using it.
Intercom Calls
Your extension number allows other people to place intercom calls to you, without
dialing any extra codes. And, because every endpoint in your telephone system is
assigned an extension number, you can call other people in your system quickly and
easily.
NOTE: Ask your system administrator for a list of extensions.
Placing Intercom Calls
To place an intercom call:
1. Press
.
2. Dial an extension number.
3. Wait for the call to be answered.
4. When finished, press
to end the call.
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
•
•
To leave a station message, press the Msg softkey and then hang up.
To leave a voice mail message, press the Msg softkey and wait for the message
center to answer. (See page 42 for more message options.)
NOTE: This option is only available if the called endpoint has a voice mailbox.
•
•
To camp onto a busy extension, stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
NOTE: You cannot camp on to an endpoint if it is in DND mode.
6
To request a callback (queue on to the endpoint), press
and hang up.
When the endpoint is available, your endpoint rings. (To cancel the queue request
6
before the callback, press
.)
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
30
The telephone system allows certain devices to be placed in handsfree mode, which
means that the user does not have to lift the endpoint or press a button to answer a
call. Although the Model 8664/8665/8668 endpoints do not support handsfree mode,
they do support the two features that will override handsfree mode on another exten-
sion.
To override handsfree mode on an extension that you are calling, you can use the
#
Force Ring feature. If you press
before you dial an extension, the called party
will need to either pick up the endpoint or press the answer button to answer the call.
To always override handsfree mode on every extension that you call, enable the Ring
Intercom Always feature on your endpoint.
To place a call that will override handsfree mode:
1. Press
.
#
2. Press
.
3. Dial the extension number.
To enable/disable the Ring Intercom Always feature:
1. Press
.
7
3
7
2. Dial
. The current status is shown.
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
•
•
To leave a station message, press the Msg softkey and then hang up.
To leave a voice mail message, press the Msg softkey and wait for the message
center to answer. (See page 42 for more message options.)
NOTE: This option is only available if the called endpoint has a voice mailbox.
•
•
To camp onto a busy extension, stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
NOTE: You cannot camp on to an endpoint if it is in DND mode.
6
To request a callback (queue on to the endpoint), press
and hang up.
When the endpoint is available, your endpoint rings. (To cancel the queue request
6
before the callback, press
.)
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Receiving Intercom Calls
When you receive an incoming intercom call, you can either answer the call or redi-
rect it.
To answer an intercom call:
Press
.
MENU
of the following options:
and redirect it with one
•
•
•
SEND TO V-MAIL: Sends the call directly to your voice mailbox. You will not see
this option if you do not have a mailbox.
IC CALL TO DND: Places your endpoint in DND mode and blocks the call. (See
page 52 for more information about DND mode.)
SEND TO DEST: Redirects the call to the intercom or outside number that you
enter. (See page 39 for more information about the Redirect Call feature.)
Outside Calls
With outside calls, you can talk to people who aren’t members of your telephone sys-
tem. When you make an outside call, however, you must dial any area codes or long
distance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
1. Press
.
8
2. EITHER, Press
(the default Outgoing Call feature code).
LINE
OR, Press
and select an outgoing Call line (1-4).
3. Dial the desired number.
NOTE: If you see a request for an account code and hear a single beep, you must
dial an account code before you can place your call (see page 75).
FCN
After you press
, you can press
to access one of the following options:
•
•
•
STN SPEED DIAL: Selects the Station Speed-Dial feature. (See page 67.)
SYS SPEED DIAL: Selects the System Speed-Dial feature. (See page 70.)
REDIAL: Redials the last outside number you dialed. (See page 40.)
To request a callback (queue on to the line) if all outgoing lines are busy when you
try to call out:
6
When you hear busy signals, press
endpoint rings.
and hang up. When the line is available, your
To cancel the queue request before your endpoint rings:
6
Press
.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Receiving Outside Calls
To receive an outside call:
Press
.
MENU
Instead of answering a ringing call, you can press
of the following options:
and redirect it with one
•
SEND TO V-MAIL: Sends the call directly to your voice mailbox. You will not see
this option if you do not have a mailbox.
•
SEND TO DEST: Redirects the call to the intercom or outside number that you
entered. (See page 39 for more information about the Redirect Call feature.)
Emergency Calls
With the telephone system, you do not have to access an outside line to dial an emer-
gency number.
To make an emergency call:
1. Press
.
9
1
1
2. Dial
. A call is automatically placed to the preset emergency
number.
CAUTION
Consult your system administrator and your local Inter-Tel servicing company for
important information about dialing emergency services from your Model 8664/
8665/8668 before you begin using it.
9
9
9
NOTE: Dial
in Europe for emergency services.
Call Waiting
If you receive a call while you are already on another call, you will hear a “call wait-
ing” tone.
To respond to a waiting call:
MENU
End your current call, place it on hold, and/or press
ing options:
to access one of the follow-
•
ANSWER: Answers the ringing call. If you did not place the current call on hold,
it is disconnected.
•
SEND TO V-MAIL: Sends the call directly to your voice mailbox without inter-
rupting the current call. (You will not see this option if you do not have a mail-
box.)
•
IC CALL TO DND: Places your endpoint in DND mode and blocks the call with-
out interrupting the current call. (See page 52 for more information about DND
mode.)
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
33
PLACING CALLS ON HOLD
You can place calls on hold in one of two ways: individual or system.
•
Individual Hold places the call on hold at one endpoint. It can then be directly
picked up at that endpoint or it can be picked up at another endpoint using the
Call Pickup (Reverse Transfer) feature (see page 37).
•
System Hold places the call on hold in the system. You can then pick up the call
at any endpoint that has a flashing button for the call, including the endpoint that
placed it on hold.
NOTE: You cannot place intercom calls on system hold.
To place a call on Individual Hold:
FCN
1. Press
until the Hold softkey is available.
2. Press the Hold softkey.
To return to the caller: Press the Hold softkey again.
NOTE: When you place a call on hold, the flashing line number on the two-line display
indicates which line is holding. If you place a call on hold and return the endpoint to idle
mode, the display does not indicate that a call is holding, however, the holding call will
recall your endpoint after the recall timer has expired. The default recall timer is set to
60 seconds.
To place an outside call on System Hold:
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
3
5
2. Dial the System Hold feature code,
.
3. Hang up or place another call.
To return to a call that is on System Hold:
LINE
1. Press
.
2. Press the flashing Call line number (1-4).
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
34
PLACING CONFERENCE CALLS
With the Conference feature, you can establish a conference call with up to three
intercom and/or outside parties (four, including you).
To place a conference call:
FCN
2
1. While on the first call, press
-
, or the Conf softkey to place the call on
hold.
2. Place another intercom or outside call.
3. Press the Conf softkey to place the second call on hold. (If necessary, repeat this
step to place one more call on hold.)
4. Press the Conf softkey twice to join all of the calls together in the conference.
During the conference call, you can do the following:
FCN
•
•
•
To place the conference on hold: Press
until the Hold softkey is available.
Press the Hold softkey. This places the conference on hold without disconnecting
the parties. To return to the conference, press the Hold softkey.
MENU
To drop out of the conference: Press
and then press the number that cor-
responds to the DISCONNECT option. This removes your endpoint from the con-
ference, but leaves the other parties connected.
To add parties to the conference:
a. Press the Conf softkey to place the conference on hold.
b. Place another intercom or outside call.
c. Press the Conf softkey twice to join all of the calls together in the confer-
ence.
•
To end the conference and place all parties on individual hold:
a. Press the Conf softkey.
FCN
b. Press
until the Hold softkey is available.
c. Press the Hold softkey to place all of the parties on individual hold. You can
then speak to one party at a time by pressing the Hold softkey.
•
•
To mute your microphone: Press the Mute softkey. This turns your microphone
off during the conference. If mute is enabled, you can hear the conferenced par-
ties, but they cannot hear you. To unmute, press the Mute softkey again.
To transfer the conference to another extension:
MENU
a. Press
.
b. Press the number that corresponds to the TRANSFER option. Dial the
desired extension number and then hang up when you are ready to complete
the transfer.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
35
TRANSFERRING CALLS
Although transferring calls is considered a basic function of an endpoint, your Model
8664/8665/8668 endpoint has many advanced options for this feature. With your end-
point, you can transfer a call to another extension, voice mail, or even an outside line.
To Another Extension
MENU
1. Press
and then press the number that corresponds to the TRANSFER
option.
MENU
2. Dial the desired extension number or press
for the following options:
• OUTSIDE PHONE: Transfers the call to an outside number.
• IC DIRECTORY: Provides access to the directory to look up the number (see
page 79).
• MESSAGE CENTER: Transfers the call to your message center.
3. Wait for an answer, announce the call and then hang up.
FCN
If the number is busy, there is no answer, or the transfer is refused, press
until
the Xfer softkey is available. Press the Xfer softkey twice to return to the caller.
NOTE: If you are receiving a transferred call and the Transfer-To-Connect option is
enabled for your endpoint, you are automatically connected to the transferred caller
LINE
once the transferring party hangs up. If this option is disabled, you must press
and
then select a Call line (1-4) to answer the transferred call.
To Voice Mail
MENU
1. Press
and then press the TRANSFER option.
MENU
2. Press
and then press the MESSAGE CENTER option.
3. EITHER, Dial the desired mailbox number and hang up.
OR, Hang up to send the call to the voice mail menu (so that the caller can select
the mailbox number).
To an Outside Number
MENU
1. Press
and then press the TRANSFER option.
MENU
2. Press
and then press the OUTSIDE PHONE option.
3. Dial the desired telephone number.
4. Wait for an answer, announce the call and then hang up.
If the number is busy, there is no answer, or the transfer is refused:
FCN
1
EITHER, Press
-
twice to return to the caller.
FCN
OR, Press
until the Xfer softkey is available and then press the Xfer softkey
twice to return to the caller.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
36
USING REVERSE TRANSFER
ing or holding at another endpoint. For example, if the attendant transfers a call to you
but you have stepped away from your endpoint, you can pick up your call at another
endpoint.
To answer a call ringing or holding at another endpoint:
MENU
1. While in idle mode, press
to bring up the two-line display.
4
2. Dial
(the default Reverser Transfer feature code).
3. Dial the extension or hunt group (see page 85) number where the call is ringing
or holding. The call is transferred to the endpoint you are using and you are con-
nected to the caller.
NOTE: If the Group Call Pickup feature is enabled, you can pick up a call ringing at
any station in a hunt group by dialing the hunt group’s extension number.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
37
FORWARDING CALLS
With the Forwarding feature, you can have calls follow you (e.g., forwarded to a cell
phone), or you can redirect calls to a voice mail or other extension.
Manual Call Forwarding
Manual call forwarding allows you to send incoming calls to another extension num-
ber. You can even forward calls to outside numbers, if your endpoint is programmed
to allow this.
To forward calls:
MENU
1. While in idle mode, press
to bring up the two-line display.
MENU
2. Press the Fwd softkey and then press
for the following options:
• ALL: All incoming calls are forwarded without ringing at your endpoint.
• NO ANSWER: All incoming calls are forwarded if they are not answered
before a timer expires.
NOTE: Only the installer or system administrator can adjust this timer.
• BUSY: When your endpoint is busy, all incoming calls are forwarded without
ringing at your endpoint.
• NO ANSWER/BUSY: All incoming calls are forwarded if your endpoint is
busy or if you do not answer, as described above.
MENU
3. Press
for the following options:
• To forward to an outside telephone number:
–
–
Press the number that corresponds to the OUTSIDE PHONE option.
MENU
Dial a telephone number or press
for the OUTSIDE DIR option.
(See page 79 for more information on directories.)
• To forward to an extension number: Dial the extension number. OR, press
the number that corresponds to the IC DIRECTORY option. (See page 79 for
more information on directories.)
• To forward to your voice mailbox: Press the number that corresponds to
the VOICE MAIL option.
• To forward to your message center: Press the number that corresponds to
the MESSAGE CENTER option.
To cancel any call forward request:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the Fwd softkey is available.
MENU
3. Press the Fwd softkey and then press
.
4. Press the number that corresponds to the FWD OFF option.
®
Inter-Tel Model 8664/8665/8668 User Guide
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic System Forwarding
Automatic System Forwarding allows your system administrator to route calls based
on the type of call and the status of your telephone. Although you cannot program the
path of a system forward, you can enable or disable this feature on your endpoint.
To enable or disable System Forwarding:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
5
4
2. Dial
.
Redirect Calls
The Redirect Call feature allows you to forward any call that is ringing on your end-
point without having to answer the call.
side number.
To redirect a call to an extension number:
MENU
1. Press
.
2. Press the number that corresponds to the SEND TO DEST option.
MENU
3. Dial the extension number or press
for the IC DIRECTORY option. (See
page 79 for more information on directories.)
To redirect a call to an outside telephone number:
MENU
1. Press
.
2. Press the number that corresponds to the SEND TO DEST option.
MENU
3. Press
and then press the number that corresponds to the OUTSIDE CALL
option.
4. Dial the outside telephone number, or use a speed-dial number (see page 67).
#
5. Press
.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
39
REDIALING A NUMBER
The Redial feature allows you to quickly redial the last outside number you dialed.
Although most endpoints redial the last number dialed, your system administrator can
program your endpoint to redial the last number saved.
To use the Last Number Dialed feature:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
4
2. EITHER, Press
-
.
FCN
OR, Press
until the Redl softkey is available and then press the Redl softkey.
A line is selected automatically, and the number is dialed.
To save a number if your system uses the Last Number Saved feature:
While the endpoint is idle or while listening to intercom dial tone,
FCN
4
EITHER, Press
-
.
FCN
OR, Press
until the Redl softkey is available and then press the Redl softkey.
The last number you dialed is saved.
To redial a number if your system uses the Last Number Saved feature:
MENU
1. While in idle mode, press
to bring up the two-line display.
LINE
2. Press
and select an outgoing Call line (1-4).
FCN
4
3. EITHER, Press
-
.
FCN
OR, Press
until the Redl softkey is available and then press the Redl softkey.
A line is selected automatically, and the saved number is dialed.
NOTE: If there is no redial number available, the display shows NO NUMBER TO
DIAL.
®
Inter-Tel Model 8664/8665/8668 User Guide
40
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAYING INFORMATION ON YOUR ENDPOINT
In addition to the four lines on the display that are dedicated to the menu, your end-
point has two lines of display where you can view information, such as the date and
time or the outside party’s name/number.
Date, Time, Name, and Extension Number
You can temporarily display the system date and time, your user name, and your
extension number at any time.
To show the date and time display (while on a call, in DND, etc.):
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
0
0
2. Dial
.
Outside Party’s Name/Number
If you are currently connected to an outside caller with Caller ID, you can toggle
between displaying the caller’s name and number.
To show the outside party’s name:
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
7
9
2. Dial
.
NOTE: If there is no outside party name available, the display shows CANNOT
ACCESS FEATURE.
USING THE MUTE FEATURE
Your endpoint has a mute feature, which, when enabled, allows you to hear the other
party but they cannot hear you. (This does not put the party on hold.)
To use the mute feature:
FCN
1. Press
until the Mute softkey is available.
2. Press the Mute softkey.
To turn the mute feature off:
Press the Mute softkey.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
41
USING THE MESSAGE FEATURE
In today’s busy world, it’s almost guaranteed that you will call someone that is on
another call, does not answer, or is in DND. But, with the Message feature, you can
let the other person know you called.
When you leave a message, you can:
•
Have the called party return your call. When the party you called responds to
the message indication, a call is automatically placed to your endpoint.
•
Leave a message with the called party’s message center, (which can be a per-
son or voice mail). When the party you called responds to the message, a call is
automatically placed to his or her message center instead of your endpoint.
NOTE: To indicate that a message is waiting, the message icon (
) is displayed.
Leaving Messages
To leave a station message while on an intercom call:
FCN
1. Press
until the Msg softkey is available.
2. Press the Msg softkey.
3. Hang up to leave a station message.
To leave a voice mail message while on an intercom call:
FCN
1. Press
until the Msg softkey is available.
2. Press the Msg softkey.
3. Wait for the message center to answer.
To leave a silent message without placing an intercom call:
MENU
1. While in idle mode, press
2. Press the Msg softkey.
MENU
to bring up the two-line display.
3. Press
and then press the number that corresponds to the LEAVE MES-
SAGE option.
4. Dial the desired extension number and hang up to leave a station message.
To cancel a message that you left at another endpoint:
MENU
1. While in idle mode, press
2. Press the Msg softkey.
MENU
to bring up the two-line display.
3. Press
and then press the number that corresponds to the CANCEL MES-
SAGE option.
4. Dial the extension number of the endpoint where you left the message.
®
Inter-Tel Model 8664/8665/8668 User Guide
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Retrieving Messages
To indicate that a message is waiting, the message icon (
) is displayed along with the
number of messages you currently have waiting.
To retrieve a message:
MENU
1. While in idle mode, press
to bring up the two-line display.
2. Press the Msg softkey. (If you have more than one message, scroll to the desired
message by pressing the Msg softkey.)
MENU
3. Press
and then press the number that corresponds to the REPLY option. A
call is automatically placed to the endpoint or message center (see page 42) that
left the message.
To cancel a waiting message:
MENU
1. While in idle mode, press
to bring up the two-line display.
2. Press the Msg softkey. (If you have more than one message, use the Msg softkey
to scroll to the desired message.)
MENU
3. Press
and then press the number that corresponds to the DELETE option
to delete the message.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
43
If you have a message waiting in your mailbox, you must access your mailbox to
retrieve it.
NOTE: If your telephone system uses Enterprise Messaging (EM), your mailbox may
have the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled
for your mailbox, you have the option of issuing a spoken command or pressing a dial-
pad button. See page 23 for ASR guidelines.
ALSO: If your mailbox has E-Mail Reader enabled, you have an advanced mailbox.
See page 91 for information and instructions about using E-Mail Reader features.
When you access your mailbox, depending on the voice processing system, enabled
features, and mailbox status, you may hear one of the following messages:
•
Mailbox almost full or full: If your mailbox is full, no new messages can be
received until you delete waiting or saved messages.
•
Quota grace limit reached: The quota grace limit is an EM feature. If this fea-
the quota grace limit has been reached, this announcement is played.
•
•
Message count and type: The system announces the number of new and/or
saved messages that are in your mailbox. The system also informs you if the mes-
sages are priority messages. If E-Mail Reader is enabled for your mailbox, the
media type is indicated.
Remote Messaging: The system indicates if the Remote Messaging feature is
enabled (see page 64). It also alerts you if a programming error has been detected
when attempting to place a Remote Messaging call.
To access your mailbox:
1. Press
.
2. During or after the greeting, say “Login” or press
to identify yourself as a
*
subscriber.
3. Say or enter your mailbox number.
#
4. Enter your mailbox password (if programmed), then press
. If you do not
#
have a password, press
to bypass the password prompt. See page 60 for
information on programming passwords.
#
NOTE: Generally, saying “Skip” or pressing
during any voice mail operation will
advance you to the next step. For example, when leaving a voice mail message for
#
another voice mail user, you can say “Skip” or press
to skip the person’s introduc-
tory message and proceed directly to the recording phase. Similarly, while listening to
#
messages, you can say “Skip” or press
to skip the system-generated voice
prompts and proceed directly to the playback phase. Also, at any menu level, you can
say “Cancel” or press
to cancel or return to the previous menu.
*
®
Inter-Tel Model 8664/8665/8668 User Guide
44
Download from Www.Somanuals.com. All Manuals Search And Download.
DISABLING AND ENABLING ASR
If your telephone system uses Enterprise Messaging (EM), your mailbox may have
the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled for
your mailbox, you have the option of issuing a spoken command or pressing a dialpad
button.
accessing option number eight on the main subscriber menu. This option disables
ASR for that particular call only.
Option number eight is used as a toggle, and you can re-enable ASR by pressing the
number eight again on the main subscriber menu only. Also, if you press a dialpad
button at the main subscriber menu to access mailbox functions, ASR is automatically
turned off and will remain off for the rest of the call.
For ASR guidelines, see page 23.
NOTE: If your mailbox has E-Mail Reader enabled, you have an advanced mailbox.
See page 91 for information and instructions about using E-Mail Reader features.
To temporarily disable ASR:
1. Access your mailbox as described on page 44.
8
2. Say “Disable” or press
to disable ASR for the call.
NOTE: To enable ASR after disabling it, press
until you are back at the main
*
8
menu. Press
to enable ASR.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
45
When you access your mailbox, you can listen to new and saved voice mail messages.
NOTE: If your telephone system uses Enterprise Messaging (EM), your mailbox may
have the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled
for your mailbox, you have the option of issuing a spoken command or pressing a dial-
pad button. See page 23 for ASR guidelines.
ALSO: If your mailbox has E-Mail Reader enabled, you have an advanced mailbox.
See page 91 for information and instructions about using E-Mail Reader features.
Listening to Messages
To listen to messages:
1. Access your mailbox as described on page 44.
1
2. If E-Mail Reader is enabled for your mailbox, say “Voice Mail” or press
.
If E-Mail Reader is not enabled for your mailbox, skip this step.
3. Select one of the following:
1
• Say “New” or press
• Say “Saved” or press
to listen to new messages.
to listen to saved messages.
3
4. While you are listening to a voice mail message, you can use the following
options:
#
• Say “Skip” or press
to skip to the end of the recording.
1
• Say “Back up” or press
to “rewind” a few seconds and replay the mes-
sage.
2
#
• Say “Pause” or press
to pause. (Say “Continue” or press
to con-
tinue.)
3
• Say “Forward” or press
to skip ahead.
4
• Say “Lower” or press
to lower the volume.
5
• Say “Envelope” or press
to play the message envelope.
to raise the volume.
6
• Say “Higher” or press
7
• Say “Save” or press
to save the new message in your mailbox.
9
• Say “Delete Message” or press
to delete the message.
NOTE: You may be prompted to confirm deleting the message. Say “Yes” to
delete the message or “No” to cancel the request to delete the message.
®
Inter-Tel Model 8664/8665/8668 User Guide
46
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When the message has finished playing, you have the following options:
1
• Say “Replay” or press
to replay the message from the beginning.
2
• Say “Reply” or press
to reply to the message. You have the following
options:
1
–
Say “Voice Mail” or press
caller.
to leave a voice mail message for the
If the caller has a mailbox number, you are prompted to verify the desti-
#
nation by saying “Yes” or by pressing
.
If the number was not associated with a mailbox, the prompt requests a
mailbox number.
If the message was from an outside caller, you cannot leave a voice mail
message.
2
–
Say “Call Back” or press
to make a return call. Your call will be
transferred automatically to the caller’s extension or telephone number,
if the number is available.
If the user is not available, you will have the option of leaving a voice
mail message.
If the telephone number is not available, you cannot reply to the mes-
3
• Say “Forward” or press
to forward a copy of the message to another
subscriber. If you want to include an introduction, say “Record” or press
1
#
. Otherwise, say “Accept” or press
to forward the message without
additional comments.
• Say “Previous” or press
• Say “Envelope” or press
4
to listen to the previous message.
to play the introductory message envelope (see
5
page 61 for information on envelope options).
6
• Say “Next” or press
to listen to the next message.
7
• Say “Save” or press
to save the new message in your mailbox.
9
• Say “Delete Message” or press
to delete the message.
NOTE: You may be prompted to confirm deleting the message. Say “Yes” to
delete the message or “No” to cancel the request to delete the message.
6. Press
to hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Recovering Deleted Voice Mail Messages
If you accidently delete a voice mail message, you can retrieve it within a specific
time frame (programmed by your system administrator). Any retrieved messages are
the programmed time (up to 24 hours) are automatically erased.
NOTE: If E-Mail Reader is enabled for your mailbox, you can also recover deleted e-
mail and fax messages. See page 101 for instructions about how to recover deleted
voice mail, e-mail, and fax messages.
To recover deleted voice mail messages:
1. Access your mailbox as described on page 44.
5
2. Say “Options” or press
for Message Options.
2
3. Say “Recover” or press
to access undelete options.
1
4. EITHER, Say “Listen” or press
to listen to your deleted messages and
choose which ones to recover. After each message you can:
1
• Say “Replay” or press
to replay the message.
2
• Say “Reply” or press
to reply to the message.
to forward the message.
to listen to the previous message.
3
4
• Say “Forward” or press
• Say “Previous’ or press
• Say “Envelope” or press
5
to play the message envelope.
6
• Say “Next” or press
to listen to the next message.
7
• Say “Recover” or press
to recover the message.
2
OR, say “Recover” or press
to recover all deleted messages.
3
OR, Say “Purge” or press
5. Press to hang up.
to permanently delete all deleted messages.
®
Inter-Tel Model 8664/8665/8668 User Guide
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Sending Voice Mail Messages
You can record and send voice mail messages by accessing the record option on the
main menu.
NOTE: If E-Mail Reader is enabled for your mailbox, a reply to an e-mail message (see
page 97) is a recorded voice message that is attached to the e-mail as a .wav file.
To record and send voice mail messages:
1. Access your mailbox as described on page 44.
2
2. Say “Record” or press
.
3. Say or enter the desired mailbox number or group list number. The system
announces the name assigned to the mailbox number or group list number. You
have the following options:
#
• Say “Yes” or press
• Say “No” or press
to accept the subscriber’s name.
to start over.
*
4. Record your message after the tone. While recording, you have the following
options:
2
#
• Press
to pause while recording. (Say “Continue” or press
to con-
tinue.)
3
• Press
to erase and re-record your message.
#
5. When finished recording, you can press
to access the following options:
NOTE: If you select the copy or special delivery options and then do not respond
to the prompts, the system will time out and deliver your message to the original
recipient.
#
• Say “Send” or press
to send the message and return to the voice mail
options.
• Say “Cancel” or press
• Say “Replay” or press
• Say “Append” or press
• Say “Erase” or press
to cancel the recording.
to replay your message.
to add to your message.
to erase and re-record your message.
to copy your message to other mailboxes.
*
1
2
3
4
• Say “Copy” or press
NOTE: If you are not using an Enterprise Messaging (EM) voice mail sys-
tem, you can send the message to additional mailboxes from the “Special
Delivery Options” menu after sending the message to the first recipient (see
page 50).
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
49
• Say or enter the mailbox number or group list number. The system
announces the name assigned to the mailbox number or group list number.
You have the following options:
#
–
–
Say “Yes” or press
Say “No” or press
to accept the subscriber’s name.
to start over.
*
Press
when you are done adding mailboxes.
*
9
• Say “Options” or press
to use special delivery options. You can then
use one or more of the following options:
1
–
–
–
Say “Private” or press
to mark the message “private.” (This pre-
vents the recipient from forwarding it to other subscribers.)
2
Say “Certified” or press
to mark the message “certified.” (When
the recipient listens to the message, you will receive a receipt notice.)
3
Say “Priority” or press
to mark the message “priority.” (This will
place your message ahead of all other waiting messages in the receiving
mailbox.)
–
–
Say “Cancel” or press
Say “Send” or press
options.
to cancel delivery options.
to send the message and return to voice mail
*
#
NOTE: If you are not using an EM voice mail system, you can send the mes-
sage to additional mailboxes after sending the message to the first recipient.
To send the message to additional mailboxes from a non-EM system:
#
1. After sending the first message, press
and then enter the next
to exit and return to voice
recipient’s mailbox number.
#
2. Press
to send the message or press
*
mail options.
6. Hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling Unheard Voice Mail Messages
You can cancel unretrieved messages that you have sent to individuals, but not mes-
sages that you sent to group lists.
To cancel unheard voice mail messages:
1. Access your mailbox as described on page 44.
5
2. While listening to the voice mail main menu, say “Options” or press
for
Message Options.
1
3. Say “Unheard” or press
.
4. When prompted, say or enter the number of the mailbox containing the unheard
message.
#
5. Say “Yes” or press
to confirm the mailbox you are selecting. Voice mail will
tell you how many messages you have waiting at the mailbox and play them for
you. After each message, you can:
1
• Say “Replay” or press
• Say “Append” or press
• Say “Forward” or press
• Say “Previous” or press
• Say “Envelope” or press
to replay the message.
to add to the message.
to forward the message to another mailbox.
to listen to the previous message.
to play the message envelope.
2
3
4
5
6
• Say “Next” or press
to listen to the next message.
7
• Say “Save” or press
to save the message in your mailbox.
9
• Say “Delete Message” or press
to delete the message.
NOTE: You may be prompted to confirm deleting the message. Say “Yes” to
delete the message or “No” to cancel the request to delete the message.
6. Press
to hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
51
USING DO-NOT-DISTURB MODE
If you are away from your desk, or if you do not want to be disturbed, you can use the
DND feature. This halts all pages and calls to your endpoint, except queue callbacks,
recalls, and direct ring-in calls. When other users call your endpoint, they hear a
repeating signal of four fast tones and, if they have a display endpoint, see the DND
message you have selected.
Your telephone system can have up to 20 different DND messages, each of which can
be changed by the system administrator, installer, or programmer. Your trainer or sys-
tem administrator will give you a list of the programmed DND messages. For conve-
nience, you should update the following default list.
DEFAULT MESSAGE NEW MESSAGE
01 DO-NOT-DISTURB
DEFAULT MESSAGE NEW MESSAGE
11 OUT OF TOWN ’TIL
12 OUT OF OFFICE
02 LEAVE A MESSAGE
03 IN MEETING UNTIL
13 OUT UNTIL
04 IN MEETING
14 WITH A CLIENT
05 ON VACATION/
HOLIDAY ’TIL
15 WITH A GUEST
06 ON VACATION/
HOLIDAY
16 UNAVAILABLE
07 CALL ME AT
08 AT THE DOCTOR
09 ON A TRIP
17 IN CONFERENCE
18 AWAY FROM DESK
19 GONE HOME
10 ON BREAK
20 OUT TO LUNCH
Because the system DND message only uses one line of your display, you can enter a
second line of text, up to 16 characters. For example, if you select 03 (IN MEETING
UNTIL) as your first line of text, you can enter “3:30” as your second line. Callers
with a display endpoint will then see, “IN MEETING UNTIL 3:30.”
To enable DND:
MENU
1. While in idle mode, press
to bring up the two-line display.
MENU
2. Press
and then press the number that corresponds to the DND option.
®
Inter-Tel Model 8664/8665/8668 User Guide
52
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Dial the two-digit number corresponding to the message you want to use.
4. If desired, customize the second display line by dialing the desired numbers or
letters as described below:
• Remain in numeric mode: Press the dialpad buttons to dial the desired num-
#
bers. Press
for a hyphen (-),
for a colon (:), the Fwd softkey to
*
leave a space, or press the Mute softkey to backspace.
NOTE: Press the Msg softkey to switch back and forth between numeric and
alphanumeric mode when you are customizing the second display line. When
the
icon is displayed, the endpoint is in alphanumeric mode.
• Change to alphanumeric mode: Press the dialpad buttons to enter the desired
characters. (Refer to the chart below.) The number of times a button is
pressed determines which character is entered. For example,
33377744432999 enters “FRIDAY.” When adjoining characters are located
under the same button, press the Fwd softkey once to advance to the next
character. For example, 6 Fwd 666 Fwd 6632999 enters “MONDAY.” (Note
that letters correspond to the letters printed on the buttons.) Press Fwd twice
to leave a space or press the Mute softkey if you need to backspace.
MENU
5. Press
and then press the number that corresponds to the ACCEPT option.
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON
1
2
3
4
5
-
&
(
)
1
1
2
3
4
5
6
7
8
9
0
A
D
G
J
B
E
H
K
N
Q
U
X
:
C
F
I
'
2
3
4
5
6
7
8
9
0
!
*
L
O
R
V
Y
.
# or /
*
M
P
N or #
*
S
?
Z
,
T
W
@
*The character available depends on the software version.
To cancel DND:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the DND softkey is available and then press the DND softkey.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
53
USING REMINDER MESSAGES
Never be late for a meeting again! With Reminder Messages, you can program your
endpoint, up to 24 hours in advance, to alert you at a specified time. At the pro-
grammed time, the reminder message signals you with eight short tones, and your dis-
play shows the message. If you are on a call, you still hear the tones, and the message
displays for ten seconds. Then the display returns after you hang up. (Reminder dis-
plays interrupt, but do not affect programming.)
Your telephone system can have up to 20 different reminder messages, each of which
can be changed by the system administrator, installer, or programmer. Your trainer or
system administrator will give you a list of reminder messages for your system. For
convenience, you should update the following default list.
DEFAULT MESSAGE
01 MEETING
NEW MESSAGE
DEFAULT MESSAGE
NEW MESSAGE
11 CALL ENGINEERING
12 CALL MARKETING
13 CALL ACCOUNTING
14 CANCEL DND
02 STAFF MEETING
03 SALES MEETING
04 CANCEL MEETING
05 APPOINTMENT
06 PLACE CALL
15 CANCEL CALL FWD
16 TAKE MEDICATION
17 MAKE RESERVATION
18 REVIEW SCHEDULE
19 LUNCH
07 CALL CLIENT
08 CALL CUSTOMER
09 CALL HOME
10 CALL CORPORATE
20 REMINDER
To request a reminder message:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
0
5
2. Dial
.
MENU
3. Dial the desired two-digit number for the message that you want, press
and then press the number that corresponds to the ACCEPT option.
#
4. While the desired message is displayed, press
.
5. Enter the time you wish to receive the message in hours and minutes. For exam-
#
ple, 0900 = 9:00. If you dial three digits, such as 900 for 9:00, press
.
NOTE: If your system is set for 24-hour format, you must enter the time appropri-
ately (e.g., 1400 = 2:00PM). If your system is set for 12-hour display format, press
1
2
for AM or
for PM.
To cancel all reminder message requests before they signal you:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
0
6
2. Dial
To clear a received reminder message:
Press
.
.
*
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Moving On
Setting Endpoint Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Ring Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Phone Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
System Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Push-To-Talk (Model 8665 only) . . . . . . . . . . . . . . . . . . . . . . 59
Changing the Call Screening Transfer Method . . . . . . . . . . . 62
Programming a Fax Destination. . . . . . . . . . . . . . . . . . . . . . . 63
Changing Volume Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Station Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
System Speed Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Performing a “Hookflash” During a Call . . . . . . . . . . . . . . . . . . 73
Programming Softkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
DSS/BLF Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Telephone Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Voice Mail Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Remote Access Password . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Remote Feature Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Requesting Agent Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Working in Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Hunt Group Calls Enabled/Disabled. . . . . . . . . . . . . . . . . . . . 85
ACD Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Using the Push-to-Talk Feature . . . . . . . . . . . . . . . . . . . . . . . . . 88
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
55
INTRODUCTION
Now that you’ve mastered the basics, it’s time to move on to the advanced features. In
this section, you’ll learn how to set preferences for your endpoint, program buttons,
use directories, access your voice mailbox remotely, and perform various other func-
tions.
SETTING ENDPOINT PREFERENCES
Your endpoint is automatically set to specific defaults. You can, however, configure
many of these settings at any time. Customizable features on your endpoint include
changing the ring type, eliminating background noise with the high noise feature,
enabling and disabling the Push-to-Talk (PTT) feature (Model 8665 only), and select-
ing a PTT channel (Model 8665 only). An asterisk (*) indicates that an option is
selected.
FCN
When the endpoint is in idle mode, press
to display user options. To navigate
through the menu, use the buttons and softkeys listed in the following table.
BUTTON
ACTION
Up/Down buttons
Select button
OK softkey
Display previous/next menu item
Selects the menu item or option
Selects the menu item or option
Saves the entry
Save softkey
Bksp softkey
Cncl softkey
Up softkey
Backspaces to allow editing of entry
Cancels edit and returns to previous menu level
Returns to previous menu level
Exits the menu (at the top level)
Exits to idle state (from any level)
Exit softkey
End Call key
In addition to the endpoint configuration options mentioned above, you can view cer-
tain administrator settings from this menu such as IP Address, etc. Only your admin-
istrator can change these options.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Ring Options
Telephone Ring
Ring Cadence
The cadence is the rhythm of the ring. It may be set to a pre-programmed ring
cadence or it may be set to obtain its cadence from the PBX. The PBX option is
designed to utilize any distinctive rings sent by the PBX while allowing the user to set
unique rings for auxiliary applications. Ring cadence options include:
•
•
Off: silent
PBX: PBX determines ring cadence (e.g. the PBX may send rings that differenti-
ate between internal and external calls.)
•
•
•
Continuous: rings continually until answered
Short Pulse: rings in short bursts
Long Pulse: rings in long bursts
Ring Tone
The Play softkey allows the user to preview the tone before selecting. If Ring
Cadence is turned off, the Ring Tone option will not appear on the menu. Select from
five available tones (scroll to Tone 5 option).
Ring Volume (Model 8665 only)
The graduated volume bar (in the Model 8665 only) indicates the levels. This setting
may be overridden by adjusting volume while the endpoint is ringing. Select a volume
level by pressing the Up and Down side buttons and then pressing the OK softkey. If
Ring Cadence is turned off, the Ring Volume option will not display.
NOTE: You cannot adjust the ring volume for Models 8664 and 8668.
Vibrate Cadence
The Vibrate cadence options are the same as for Ring Cadence.
Ring Delay
Determines how long the vibrate cadence will play before the audible ring starts. If
the Ring Cadence or Vibrate Cadence is turned off, the Ring Delay option will not
appear on the menu. Ring Delay options include:
•
•
No delay: the audible ring starts as soon as the endpoint starts to vibrate.
5 second delay: the endpoint vibrates for five seconds before the audible ring
starts.
•
10 second delay: the endpoint vibrates to ten seconds before the audible ring
starts.
Auxiliary Ring 1/Auxiliary Ring 2
Auxiliary Ring 1/2 are designed to be used by OAI applications, enabling the user to
set a distinctive ring for these applications.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Phone Options
Noise Mode
Provides options that describe the noise level in your environment. Selecting the cor-
rect option will adjust the endpoint to account for background noise. Select Normal
for most office environments; High for moderate background noise; or Severe for
extremely noisy conditions. Use of the non-Normal modes is not recommended unless
you are in a loud environment or you may find it difficult to be heard on your end-
point.
Key Tones
Determine if tones play when keys are pressed. Key tones are enabled by default.
Turn key tones on or off.
Warning Tones:
Play to alert user to various conditions, such as system up or down, out of range, etc.
These tones are enabled by default. Turn warning tones on or off.
Display Contrast
Adjusts the display for different lighting situations. Set contrast by pressing the Up
and Down side buttons until the desired contrast is displayed and then pressing the
OK softkey.
Keypad Autolock
Locks the keypad automatically when in standby mode. The automatic locking func-
tion of the keypad may be disabled (the default) or adjusted for a delay before lock-
ing. Keypad Autolock options include:
•
•
•
•
Disable: the keypad will not lock.
5 seconds: the keypad will lock in five seconds
10 seconds: the keypad will lock in ten seconds
20 seconds: the keypad will lock in 20 seconds
System Info
Phone IP address
Displays the IP address currently assigned to the endpoint. This number may not be
edited.
Gateway IP address or Server IP address
Displays the IP address currently assigned to the Inter-Tel Gateway or the SVP
Server.
Firmware Version
Displays the software version running the endpoint.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Extension
Displays the extension currently assigned to the endpoint. This number is for display
purposes only; it cannot be changed.
Push-To-Talk (Model 8665 only)
The Model 8665 incorporates push-to-talk functionality. PTT may be allowed or dis-
allowed in the Admin menu. If allowed, the user may enable or disable locally, and
may set the channel, tone volume and audio volume. The menu for push-to-talk does
not appear if PTT is disallowed on the Admin menu or if no channel is enabled on the
Admin menu.
Channel
The current channel is displayed. The user may enable any PTT channel that has been
allowed in the Admin menu by entering the corresponding number from the keypad.
If PTT has been enabled in this endpoint, the default channel is the lowest allowed
channel as set in the Admin menu.
Enable/Disable
Enable turns on PTT mode. Disable turns off PTT mode. PTT is disabled by default.
NOTE: If PTT is allowed in the Admin menu and enabled by the user, standby battery
pack life is decreased to about 30 hours.
Audio Volume/Tone Volume
Used to adjust volume of PTT audio and tones. The graduated volume bar indicates
the levels. The Audio Volume setting may be overridden by adjusting volume while
the endpoint is in a push-to-talk call. Select a volume level by pressing the Up and
Down side buttons and then pressing the OK softkey.
®
Inter-Tel Model 8664/8665/8668 User Guide
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING MAILBOX PREFERENCES
Your mailbox contains personal options to allow you to customize voice mail func-
tions. However, before you change your voice mail options, you must first initialize
NOTE: If your telephone system uses Enterprise Messaging (EM), your mailbox may
have the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled
for your mailbox, you have the option of issuing a spoken command or pressing a dial-
pad button. See page 23 for ASR guidelines.
ALSO: If your mailbox has E-Mail Reader enabled, you have an advanced mailbox.
See page 91 for information and instructions about using E-Mail Reader features.
Changing Your Mailbox Password
Your password prevents unauthorized access to your mailbox. When you first initial-
ize your mailbox, you are prompted to change your password from the default (your
mailbox number).
You can change your mailbox password at any time. The new password can be up to
12 digits long and must be numeric.
To change your mailbox password:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
.
3
3. Say “Password” or press
If you want a password, enter a new password using digits 0-9 (up to 12 digits),
#
and then press
password.
when you are done. The messaging system plays back your
#
If you do not want to use a password, just say “Skip” or press
.
#
4. Say “Accept” or press
to accept the password as entered or say “Re-enter”
3
or press
to erase and re-enter your password.
5. Press
to hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Changing the Voice Mail Message Envelope
When you receive a voice mail message, the voice mail system plays an “envelope”
that can include the time and date the message was left, the source of the message,
but you can change your envelope, as described below.
NOTE: If E-Mail Reader is enabled for your mailbox, you can also change your e-mail
and fax message envelopes. See page 102 for instructions about how to change your
voice mail, e-mail, and fax message envelopes.
To change your voice mail message envelope:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
4
3. Say “Envelope” or press
to select the Message Envelope Options Menu.
You can then do any of the following:
1
• Say “Time, Date” or press
to enable or disable the time and date
options.
2
• Say “Source” or press
• Say “Length” or press
to enable or disable the message source option.
to enable or disable the message length option.
3
4
• Say “All Options” or press
to enable all options and return to the Per-
sonal Options Menu.
5
• Say “None” or press
to disable the entire envelope and return to the
Personal Options Menu.
#
• Say “Accept” or press
to accept the changes.
• Say “Cancel” or press
to return to the Personal Options Menu.
*
4. Press
to hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Changing the Call Screening Transfer Method
NOTE: The Call Screening feature is available only if it is enabled for your mailbox.
Contact your voice mail administrator to see if this feature is enabled for your mailbox.
Depending on the transfer method you select, calls that are transferred from your
mailbox may be one of the following:
•
•
Unannounced Calls: Calls are sent directly to your extension.
Announce-Only Calls: Before voice mail transfers a call to you, a prompt asks
the caller to record his or her name. When you answer, you hear “You have a call
from (caller’s name).” Then the call is sent to your extension.
•
Screened Calls: Before voice mail transfers a call to you, a prompt asks the
caller to record his or her name. When you answer, you hear “You have a call
from (caller’s name).” You can choose whether or not to accept the call.
See page 76 for instructions about using the call screening feature.
To change your transfer method (if enabled):
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
9
3. Say “More” or press
for More Options.
5
4. Say “Transfer” or press
. The system tells you what your current transfer
method is. You can then select the desired transfer method, as follows:
1
• Say “Unannounced” or press
to select unannounced transfers.
to select screened transfers.
2
• Say “Screened” or press
3
• Say “Announce” or press
to select announce-only transfers.
to return to the Personal Options Menu without
• Say “Cancel” or press
*
making changes.
5. Press
to hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Programming a Fax Destination
With the Inter-Tel voice processing system, when you specify a fax destination num-
ber for your mailbox, callers can access your mailbox to send a fax to your fax
machine.
To change your fax destination number:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
9
3. Say “More” or press
for More Options.
1
4. Say “Number” or press
.
5. Say or enter the number of your fax destination. (If you entered the letters using
#
the dialpad, press
when you are done.)
#
6. EITHER, say “Accept” or press
to accept the number.
3
OR, say “Re-enter” and press
to erase and re-enter the number.
7. Press
to hang up.
Changing the Message Search Order
You can change the order in which you retrieve your messages based on the date and
available for you to access in the order you specify. The search order, can be config-
ured as first in/first out, or last in/first out.
NOTE: If E-Mail Reader is enabled for your mailbox, when you change the message
search order, your changes apply to your voice mail, e-mail, and fax messages.
To change the message search order:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
9
3. Say “More” or press
for More Options.
2
4. Say “Order” or press
for the Message Search Order.
5. Select one of the following options:
1
• Say “New” or press
to change the search order for new messages.
2
• Say “Saved” or press
to change the search order for saved messages.
6. Your current message search order is played. Select one of the following
options:
1
• Say “First” or press
(First In/First Out).
• Say “Last” or press
In/First Out).
• Say “Cancel” or press
to retrieve the earliest-received messages first
to retrieve the latest-received messages first (Last
to return to the Personal Options Menu without
2
*
making changes.
7. Press
to hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Programming Remote Messaging
NOTE: The Remote Messaging feature is available only if it is enabled for your mail-
box. Contact your voice mail administrator to see if this feature is enabled for your mail-
box.
ALSO: The remote messaging feature is supported for voice mail messages only. If E-
Mail Reader is enabled for your mailbox, you cannot use remote messaging for e-mail
and fax messages.
With Remote Messaging, you can program voice mail to call you when your mailbox
receives new voice mail messages. Using a “cascade” (a series of up to nine telephone
numbers), voice mail will call each number until it successfully connects to a device
(e.g., pager, answering machine, etc.).
can program a cascade to be used during specific days and times. For example, if you
want to be paged when you receive a voice mail message from 5-10 PM on weekdays,
you can set up a primary cascade. If you also want to receive pages for messages
marked “priority” on the weekends, you could set your alternate cascade for all day
on Saturdays and Sundays.
To set up remote messaging for voice mail messages (if enabled):
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
. You have the following options:
5
3. Say “Remote” or press
1
• Say “Primary” or press
to set up a primary cascade.
2
• Say “Alternate” or press
to set up an alternate cascade.
1
4. Say “Level” or press
and then say or enter the number (1-9) of the level
you wish to program. You then have the following options:
• To set up or change an extension or outside number:
2
–
–
Say “Number” or press
.
1
EITHER, say “Internal” or press
for an extension number.
for an outside number.
2
OR, say “Outside” or press
–
Say or enter the number.
• To set up or change pager notification:
1
–
–
Say “Pager” or press
.
2
Say “Personal” or press
.
1
Say “Change” or press
to enable or disable the number.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
64
3
5. Say “Days” or press
. Then select one of the following:
1
• Say “Weekdays” or press
for Monday-Friday.
2
• Say “Days” or press
for all days.
3
• Say “Day” or press
to select individual days. You are prompted to say
or press numbers 1-7 which correspond to the days Sunday through Satur-
day.
2
6. Say “Time” or press
. Then say or enter the times you want the message
notification to start and stop. Enter or say the times with two digits for the hour
and two digits for the minutes (e.g., 0900 = 9:00). If entering the time in 12-hour
format:
1
• Say “AM” or press
• Say “PM” or press
for AM.
for PM.
2
NOTE: For 24-hour notification, program the starting and ending times to be
the same.
4
7. Say “Category” or press
. You have the following options:
1
• Say “All Messages” or press
for all messages.
2
• Say “Priority” or press
for priority messages only.
#
8. Hang up or press
to save the settings and exit.
NOTE: If for some reason voice mail is not able to use your remote notification, your
mailbox will receive a message stating that notification could not be completed.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
65
CHANGING VOLUME LEVELS
You can change the speaker volume level of the endpoints with the volume buttons
located on the side of the endpoint (see page 4 and page 5 for photos).
NOTE: The ring volume is also adjustable for the Model 8665 endpoint. To adjust the
ring volume for the Model 8665, use the volume buttons as indicated below.
To change the speaker volume level of the endpoint, press the Up button on the left
side of the endpoint to increase the volume. Press the Down button on the left side of
the endpoint to decrease the volume. Your changes are automatically saved.
RETURNING TO DEFAULT OPERATION
You can return your endpoint to default levels at any time. This feature cancels DND,
manual call forwarding, and queue requests; and restores pages, hunt group calls, and
system forwarding all at once.
To return your endpoint to default:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
9
4
2. Dial
. The message STATION DEFAULTED is displayed.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
66
SPEED DIALING
Speed dialing allows you (and your system administrator) to store frequently dialed
numbers for easy dialing. Each number is stored on your endpoint (Station Speed
Dial) or in the telephone system (System Speed Dial) and is identified by a location
number. Once programmed, you can quickly dial these numbers by entering a feature
code and dialing the desired location number. Because the system supports both sta-
tion and System Speed-Dial numbers, you can have access to over 5000 stored num-
bers.
Station Speed Dial
You can program and use up to ten personal speed-dial numbers on your endpoint. In
addition, if you have programmable softkey buttons, you can program them as speed-
dial buttons for one-touch dialing. To use a speed-dial button, you must:
•
•
Store the number in a speed-dial location.
FCN
FCN
6
5
Use the StSp softkey (
-
) or the SySp softkey (
-
) to access the
stored numbers.
•
Program an available softkey as a speed-dial button by associating the speed-dial
location with the button.
NOTE: You can use the Speed-Dial feature even if your endpoint does not have
programmable softkey buttons.
Programming Station Speed-Dial Numbers
To store a speed-dial number, use the Station Speed-Dial Programming feature code
to program the number in a speed-dial location. Use the following table to list the
numbers that you store in speed-dial locations 0-9.
0 _______________________ 5 _______________________
1 _______________________ 6 _______________________
2 _______________________ 7 _______________________
3 _______________________ 8 _______________________
4 _______________________ 9 _______________________
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
67
To store a number in a Speed-Dial location:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
8
3
2. Dial
.
3. Dial the speed-dial location (0-9) you want to program.
4. Enter the desired name for the speed-dial number, as described below:
• Alphanumeric mode: Press the dialpad buttons to enter the desired charac-
ters. (Refer to the chart on page 79.) The number of times a button is pressed
determines which character is entered. For example, 533266 would enter
“JEAN.” When adjoining characters are located under the same button, press
the Fwd softkey once to advance to the next character. For example, 66 Fwd
6667776 would enter “NORM.” (Note that letters correspond to the letters
printed on dialpad buttons 2-9.) Press Fwd twice to leave a space. Press the
Mute softkey if you need to backspace.
• Press
to save the name.
#
5. Dial the extension number or telephone number to be stored, as described below:
• Numeric mode: Press the dialpad buttons to dial the desired numbers.
NOTE: You cannot use hyphens or colons in the telephone number. If your
MENU
number includes an asterisk, pound, hookflash, or pause, press
use the menu options to enter the special character.
and
• Press
to save the number.
#
NOTE: To dial outside telephone numbers without first selecting an outgoing line, enter
8
the Outgoing Call access code (default is
) before the outside telephone num-
ber.ber.
To erase a Station Speed-Dial name and/or number:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
8
3
2. Dial
.
3. Dial the desired location code (0-9) you want to erase.
4. Press the Mute softkey repeatedly until the name is erased.
5. Press
6. Press Mute repeatedly until the number is erased.
7. Press to save the changes.
to continue.
#
#
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Creating Station Speed-Dial Buttons
If your telephone system supports it, you can program the programmable softkeys
(Pgm1- 5) as speed-dial buttons by selecting a speed-dial number to associate with
the button.
NOTE: Before you program a speed-dial button, you need to store a number in a
speed-dial location (see the previous instructions).
To program a speed-dial button:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the programmable softkeys (Pgm 1- 5) are available.
3
9
7
3. Dial
.
4. Press the programmable softkey you want to program as a speed-dial button.
3
8
2
5. Dial
.
6. Dial the speed-dial location (0-9) or select the location on your display that con-
tains the number you want to associate with the button.
To view how your Station Speed-Dial buttons are programmed:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the programmable softkeys (Pgm 1- 5) are available.
3
9
6
3. Dial
.
4. Press the desired Station Speed-Dial button. The name and number are dis-
played.
5. Press
to exit.
#
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number using a location number:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
6
2. EITHER, Press
-
.
FCN
OR, Press
until the StSp softkey is available and then press the StSp softkey.
3. Press the number that corresponds to the desired Station Speed-Dial location
number (0-9).
To dial a Station Speed-Dial number using a speed-dial button:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. EITHER, Press
, followed by the number or character that corresponds to the
FCN
8
speed-dial button. (For example, press
programmed under the Pgm1 softkey.)
FCN
-
to dial the speed-dial number
OR, Press
until the speed-dial buttons are displayed, and then press the
appropriate speed-dial button (Pgm1- 5).
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
69
System Speed Dial
Your system administrator can store several speed dial numbers in the system speed
dial locations. Depending on the size of your system, you can access up to 1000 or up
to 5000 system speed dial locations, if they have been programmed.
To view and dial System Speed-Dial numbers:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
5
2. EITHER, Press
-
.
FCN
OR, Press
until the SySp softkey is available and then press the SySp soft-
key.
3. Dial the location code (000-999 or 0000-4999) and press
to view the num-
#
ber.
MENU
4. When the number is displayed, press
for the following options:
• PREVIOUS: Displays the previous location code on the System Speed-Dial
list.
• NEXT: Displays the next location code on the System Speed-Dial list.
• START OVER: Returns to step 4 (above).
• CALL: Automatically calls the number displayed.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
70
USING RECORD-A-CALL
NOTE: This feature is not supported on peer-to-peer (P2P) calls. Ask your system
administrator if your endpoint is configured to use P2P audio.
If your telephone system is equipped with a Voice Processor (voice mail), you may
have access to the Record-A-Call feature. If so, you can record an ongoing call as a
mailbox message. You can then retrieve the message, just as you would any other
mailbox message.
NOTE: The Record-A-Call feature remains active after the other party hangs up. This
allows you to append the recorded call with your own message.
To use the Record-A-Call feature while on a call:
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
8
5
2. Dial
.
3. If required, dial the desired mailbox number. (Your endpoint may be pro-
grammed to select the mailbox, or you may be required to dial it.)
You hear a confirmation tone when the Record-A-Call feature is activated.
To turn off Record-A-Call:
3
8
5
EITHER, Press the Feat softkey and then dial
OR, Press
.
.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
71
PAGING
The Paging feature allows you to make an announcement through endpoint speakers
or external speakers (if your system is equipped with external paging equipment). To
prevent announcements from transmitting through every endpoint in the system, this
feature uses page zones. Each zone contains a different combination of extensions and
external paging equipment, and is programmed by your system administrator. Ask
your trainer or system administrator how the zones are programmed, and list them
below for your convenience.
0 _______________________ 5 _______________________
1 _______________________ 6 _______________________
2 _______________________ 7 _______________________
3 _______________________ 8 _______________________
4 _______________________ 9 _______________________
NOTE: Although you can make pages from the Model 8664, 8665, and 8668, you can-
not receive them.
Making Pages
To make pages:
MENU
1. While in idle mode, press
to bring up the two-line display.
7
2. Dial
and then select the desired page zone (0-9).
3. After the tone, make your announcement and hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
72
PERFORMING A “HOOKFLASH” DURING A CALL
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
3
0
2. Dial
.
NOTE: This features is known as a “Recall” in European systems.
PROGRAMMING SOFTKEYS
Depending on how your system is programmed, some of your softkeys (Pgm 1-5)
may be “user-programmable.” If so, you can program them as feature, Direct Station
Selection/Busy Lamp Field (DSS/BLF), or Station Speed-Dial (see page 67) buttons.
To view how your programmable softkeys are programmed:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the programmable softkeys (Pgm 1-5) are available.
3
9
6
3. Dial
.
4. Press the desired programmable softkey. The feature programmed for the soft-
key is displayed.
NOTE: If the display shows UNDEFINED KEY, the softkey is programmable, but
has not yet been programmed.
5. Press
to exit.
#
To return all programmable softkeys to their original default values:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
9
5
2. Dial
.
Feature Buttons
A softkey programmed as a feature button provides a way to quickly access the associ-
ated feature.
To program a softkey as a feature button:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the programmable softkeys (Pgm 1-5) are available.
3
9
7
3. Dial
.
4. Press the softkey you want to program.
5. Dial the feature code you want to store under that button. (Refer to page 110 for
default feature codes.)
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
73
DSS/BLF Buttons
A button programmed as a Direct Station Selection/Busy Lamp Field (DSS/BLF)
softkey provides a way to dial the associated extension with one touch.
To assign an extension to a DSS/BLF button:
MENU
1. While in idle mode, press
to bring up the two-line display.
FCN
2. Press
until the programmable softkeys (Pgm 1-5) are available.
3
9
7
3. Dial
.
4. Press the softkey you want to program.
5. Dial the extension number you want to store under that button.
Once programmed, you can use your DSS button as follows:
•
You can place an intercom call to the extension that the DSS button is pro-
grammed for by pressing the button once.
•
You can transfer a call to the extension that the DSS button is programmed for by
pressing the button once and hanging up. (For transferred calls that are forwarded
to voice mail you will hear repeating double tones.)
•
You can visually monitor the status of the extension. The DSS/BLF lamps indi-
cate the status of the extension or feature assigned to the button. These indica-
tions are shown in the table below.
If the lamp is...
Then...
Solidly lit
The associated extension is busy, or the associated feature is
enabled.
Flashing slowly
Flashing rapidly
The extension is in Do-Not-Disturb.
The extension has a call ringing in.
Fluttering continuously The extension is causing a STATION OFF-HOOK system alarm.
NOTE: For the DSS buttons to work as described above, your system administrator
must define them as user-programmable in Database Programming.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
74
USING ACCOUNT CODES
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to telephone record reports that the system will periodi-
cally print.
There are three types of account codes:
•
Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
•
•
Forced account codes must be dialed before you can place an outside call.
Optional account codes can be entered at any time during a call.
NOTE: Your system administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code while on a call:
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
9
0
2. Dial
.
3. Dial the optional account code. If the account code is not immediately accepted,
press
.
#
To set an account code for all calls placed from your endpoint:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
9
1
2. Dial
diately accepted, press
endpoint until it is disabled.
and then the account code. If the account code is not imme-
. This code will be used for all calls made from your
#
To disable the account code you set for your endpoint:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
9
1
2. Dial
and press
.
#
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
75
SCREENING CALLS
If desired, you can screen calls that are transferred from voice mail. This allows you
to accept and/or refuse specific calls. Depending on the call screening transfer method
you select (see page 62), calls from voice mail may be unannounced, announce only,
or screened.
When your mailbox is programmed for screened calls, you have the following options
when you receive a transfer:
•
•
•
•
Say “Accept” or press
Say “Replay” or press
to accept the call.
#
1
to replay the announcement.
2
Say “Voice Mail” or press
to send the call to voice mail.
3
Say “Forward” or press
call to another extension.
and then enter the extension number to forward the
to refuse the call.
•
Say “Refuse” or press
*
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
76
USING DIRECTORIES
With directories, you can use the dialpad to find names and numbers. You can then
use the directory information to make calls, access features, or leave voice mail mes-
sages. There are two types of system directories:
•
•
Telephone directory: Search for and connect to contacts or access features.
Voice Mail directory: Search for voice mail contacts and leave voice mail mes-
sages. (See page 80.)
Telephone Directory
There are three subdirectories available in the Telephone directory:
•
•
•
Intercom: Find (and dial) intercom extensions.
Outside: Find (and dial) outside numbers listed in the company directory.
Feature: Find (and activate) system features.
The Telephone directory uses one of two search methods to find contacts or features:
Intelligent Directory Search (IDS) or Basic Search (see page 79). Enter a full or par-
tial name with the dialpad buttons to search for a contact or feature. You can then con-
tact the person or access the feature by dialing the number or pressing a button.
NOTE: The search method used for your system (IDS or Basic) depends on your soft-
ware version.
Intelligent Directory Search (IDS)
IDS simplifies searching for entries in a directory by allowing you to press a dialpad
button once rather than several times to enter a character. As you enter characters,
IDS displays the entry that best matches the characters entered (see the following
examples).
NOTE: The Intercom directory may display two similar entries, one without an asterisk
and one with an asterisk (“John Smith” and “*John Smith”). The entry without an aster-
isk is a primary extension; the entry with an asterisk is a secondary extension.
INTERCOM DIRECTORY
OUTSIDE DIRECTORY
*JOHN SMITH
67890
EEE_STORE
4809619000
FEATURE DIRECTORY
AGENT HELP
375
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
77
To search for a directory name or feature using IDS:
3
0
7
MENU
1. Press
• Press
and dial
:
1
for the Intercom directory.
for the Outside directory.
for the Feature directory.
2
3
• Press
• Press
2. Press the dialpad buttons to enter characters (up to 16 characters). (See the fol-
lowing table for dialpad button character descriptions.) Each dialpad button rep-
resents several characters. As you press the dialpad buttons, the system connects
the character sequence to possible directory matches. For example, to enter
5
6
6
3
7
JONES, press
on nine keys (T9)” feature found on cell phones.
3. Press to dial a number or activate a feature code while the entry is dis-
played.
. This data entry method is similar to the “text
#
BUTTON
CHARACTERS REPRESENTED
0
1
2
3
4
5
6
7
8
9
0
1
2 A B C a b c Ç â ä à å ç Ä Å á
3 D E F d e f é ê ë è É
4 G H I g h i ï î ì í
5 J K L j k l
6 M N O m n o ô ö ò Ö ó ñ Ñ
7 Q P R S q p r s
8 T U V t u v ü û ù Ü ú
9 W X Y Z w x y z ÿ
Returns endpoint to the state before entering IDS
*
Activates the selection
#
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Basic Search
Use Basic Search to search the Telephone directory for a contact name or feature.
NOTE: When using Basic Search or the Voice Mail directory, press the Msg softkey to
switch back and forth between numeric and alphanumeric mode. When the
icon is
displayed, the endpoint is in alphanumeric mode.
To search the Telephone directory using Basic Search:
3
0
7
MENU
1. While in idle mode, press
and dial
.
1
2
2. Press
to select the Intercom directory, press
to select the Outside direc-
3
tory, or press
to select the Feature directory. If placing a call, choose
between OUTSIDE DIR and IC DIRECTORY.
3. Enter letters or numbers (up to 10 characters) as described below:
• Remain in alphanumeric mode: Press the dialpad buttons to enter the desired
characters. The number of times a button is pressed determines which char-
acter is entered. For example, 77776444844 would enter “SMITH.” When
adjoining characters are located under the same button, press the Fwd soft-
key once to advance to the next character. For example, 5666 Fwd 66337777
would enter “JONES.” Press Fwd once to advance and twice to leave a
space. Press the Mute softkey to backspace.
• Change to numeric mode: Press the dialpad buttons to enter an extension
number. Press the Mute softkey to backspace.
MENU
4. Press
and then press the number that corresponds to the SEARCH option.
5. The search results are displayed.
MENU
EITHER, press
for the PREVIOUS, NEXT, and START OVER options.
OR, press
to call the number or activate the feature.
#
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON
1
2
3
4
5
-
&
(
)
1
1
2
3
4
5
6
7
8
9
0
A
D
G
J
B
E
H
K
N
Q
U
X
:
C
F
I
'
2
3
4
5
6
7
8
9
0
!
*
L
O
R
V
Y
.
# or /
*
M
P
N or #
*
S
?
Z
,
T
W
@
*The character available depends on the software version.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Voice Mail Directory
With the Voice Mail directory, subscribers and non-subscribers can use ASR (if
enabled) or dialpad buttons to search for names in the directory. Subscriber names are
automatically added to the directory when their mailbox is initialized. ASR may not
be able to locate names that are pronounced differently than they are spelled. For
these types of names, use the alternate search method of spelling the name using the
endpoint dialpad buttons (see table below).
You begin a search by dialing the system voice mail extension and selecting the direc-
tory option. You are prompted to say or spell the name of the mailbox user you want
to search for. For example, if you say the name John, the system locates all of the sub-
scribers with the first or last name of John. The list of names returned might include
the names John Smith, John Jones, John Nielson, David John, Robert John, etc.
When one to 10 matches are located, you can browse the list of returned names by
1
selecting the Previous (say “Previous” or press
) and Next (say “Next” or press
3
) options. The directory lists are circular. That is, when the end of the list is
reached, the next name played will be the first name in the directory. When the correct
#
name is played say “Yes” or press
to select it.
If the system locates more than 10 matches, you can either browse the list using the
options mentioned above, or filter the list by responding to the filtering questions gen-
erated by the system. Based on your responses, the system filters the list to include
first or last name matches only. If the system cannot locate an exact match, it returns
the closest match found.
To use the dialpad buttons to spell a name: When prompted, press the appropriate
dialpad buttons to spell the name. The number of times a button is pressed determines
which character is entered, as shown in the table below. When adjoining characters
are under the same button, press Fwd to advance to the next character. For example,
5666Fwd66337777 enters “Jones.”
NUMBER OF TIMES BUTTON IS PRESSED
1
-
2
&
B
E
H
K
N
Q
U
X
:
3
(
4
)
5
1
2
3
4
5
6
7
8
9
0
BUTTON
1
2
3
4
5
6
7
8
9
0
A
D
G
J
C
F
I
‘
!
*
L
O
R
V
Y
.
#
ñ
S
?
Z
,
M
P
T
W
@
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
80
To perform a directory search:
#
2. Say “Directory” or press
.
3. Say the last name of the person you are searching for or press the appropriate
dialpad buttons to spell the name (see page 80).
If 10 or fewer matches are located, you can access and browse the list immedi-
ately (see step 4.)
If the list contains more than 10 matches, you have the option to browse or filter
the list. (skip step 4. and see step 5.)
4. If 10 or fewer matches are located, you have the following options:
#
• Say “Yes” or press
to accept the name that is played.
1
• Say “Previous” or press
2
• Say “More” or press
• Say “Next” or press
• Say “New” or press
to hear more information about the subscriber.
to browse to the next name in the list.
to search for a new name.
3
4
• Say “Cancel” or press
5. If more than 10 matches are located, the system prompts you to browse or filter
to exit the directory.
*
the list. Do one of the following:
1
• Say “Yes” or press
to browse the list. (See step 4. for options).
2
• Say “No” or press
to select the filter option and then respond to one of
the following filter questions:
–
The system begins by asking you if the name you are searching for is the
1
last name.
, say the last name, or spell the
–
If you did not respond to the first question, the system asks if the name
1
you are searching for is the first name. If it is, say “Yes,” press
the first name, or spell the first name.
, say
After the list has been filtered by first or last name, a smaller list of names is
returned. You can then browse the list and select the appropriate name (see step
4.)
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
81
PROGRAMMING REMOTE FEATURE ACCESS
If you are away from your desk and forgot to put your endpoint in DND, don’t worry.
With the Remote Feature Access, you can place your endpoint in DND or forward
calls from any other endpoint on the system. And, if you have a special dial-up line,
you can access your endpoint features from an outside line.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your endpoint:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
9
2
2. Dial
.
.
#
NOTE: Your extension number is your password at default.
4. Enter the new password followed by . You hear a confirmation tone.
#
5. Enter the new password again for verification followed by
. You hear a con-
#
firmation tone.
To change the station password using remote programming, see Remote Feature
Access.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Remote Feature Access
To access your endpoint from another endpoint:
1. EITHER, Call your Direct Inward System Access number (provided by your
system administrator). If required, enter your password.
OR, Use any endpoint on the system.
3
5
9
2. Dial
.
3. Enter your extension number.
4. Enter your password followed by
. You can now use any of the following
#
features.
To change the station password using Remote Programming:
3
9
2
a. Dial
.
b. Enter the new password, followed by
.
#
c. Enter the new password again for verification, followed by
.
#
To turn on DND:
3
7
0
a. Dial
.
b. Enter the message number (01-20) and enter the optional second-line mes-
sage text.
3
7
1
To turn off DND: Dial
To turn on Call Forward:
a. Enter one of the following Call Forward feature codes.
.
3
3
3
3
5
5
5
5
5
6
7
8
All Calls.......................
If No Answer ................
If Busy.........................
If No Answer or Busy .....
b. Enter an extension number or enter an outside line access code followed by a
telephone number.
3
5
5
To turn off Call Forward: Dial
5. Press to hang up.
.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
83
REQUESTING AGENT HELP
NOTE: This feature is not supported on peer-to-peer (P2P) calls. Ask your system
administrator if your endpoint is configured to use P2P audio.
Your telephone system may be programmed to support the Agent Help feature, which
allows you to request help from a designated “Agent Help Extension” (usually your
supervisor) during a call. When your request call rings at the Agent Help Extension,
the supervisor can choose to join the call or reject the request.
If the Agent Help Extension is a digital endpoint, the endpoint’s microphone is auto-
matically muted so that the supervisor cannot be heard unless he or she presses the
mute button. If the Agent Help Extension is a single-line endpoint, however, the
supervisor can be heard as soon as the conference is established. In either case, the
supervisor can hear all other parties on the call.
To use the Agent Help feature while on a call:
FCN
7
1. EITHER, Press
-
.
FCN
OR, Press
until the Feat softkey is available and then press the Feat softkey.
3
7
5
2. Dial
. If you hear repeating tones, the Agent Help feature is not
available at your endpoint, you already have four parties in your call, not enough
system circuits are currently available, or the Agent Help Extension is in DND.
3. Dial the Agent Help Extension number, if required. (Your endpoint may be pro-
grammed to automatically dial the number, or you may be required to dial it.)
If the Agent Help Extension accepts the call, you hear the Agent Help tone, if it is
enabled, and the supervisor can monitor or join your call.
If the Agent Help Extension rejects the call, you hear a confirmation tone, and the
display shows AGENT HELP REJECTED.
To respond to an Agent Help request:
When you receive an Agent Help request, your endpoint’s display shows <name>
REQUESTS HELP. You can do one of the following:
•
To accept the call: Press
heard by either party unless you press the Mute softkey.
. Your microphone is muted and you cannot be
MENU
•
To reject the call: Press
and then press the number that corresponds to the
REJECT HELP option.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
84
WORKING IN HUNT GROUPS
Your system may be programmed with “hunt groups.” Hunt groups are groups of end-
points that share a common extension number in addition to having individual exten-
sion numbers. This allows someone to call anyone in the group (using the common
extension) or a specific member (using the individual extension). The members of
these groups and the common extension(s) are programmed by your system adminis-
trator.
Hunt Group Calls Enabled/Disabled
If you are a member of a hunt group, you can divert or accept hunt group calls to your
extension.
To divert or accept hunt group calls:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
2
4
2. Dial
.
ACD Hunt Groups
Some hunt groups use a special feature called Automatic Call Distribution (ACD) that
distributes the hunt group calls equally among the available members. These hunt
group members are referred to as “agents,” who log in to the ACD hunt group to
receive calls and log out to halt ACD hunt group calls.
Distributing Calls
Calls are distributed through an ACD hunt group based on Agent IDs or extensions,
as described below.
•
Agent IDs: If the hunt group is programmed to use ACD Agent IDs, each agent
is assigned an Agent ID number to enter during the login procedure (see Logging
In and Out of ACD Hunt Groups). The hunt group calls are routed to logged-in
agents, according to their Agent ID number instead of their extension number.
Because the Agent ID is not associated with any extension, the agent can use any
endpoint in the system to log in.
•
Members: If the hunt group is not programmed to use Agent IDs, it will have a
pre-programmed list of endpoints and will send calls to the endpoints where
agents are logged in.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Logging In and Out of ACD Hunt Groups
Agents can log in to and out of the ACD hunt group at any time. While logged in, the
agent receives calls through the ACD hunt group. When the agent is logged out, calls
to that ACD hunt group bypass the agent.
To log in to all of your ACD hunt groups at once using the ACD Agent Login/
Logout feature code:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
2
8
2. Dial
and enter your Agent ID, if necessary. The display shows
AGENT LOGGED IN TO ALL ACDS, and you hear a confirmation tone.
NOTE: This feature code acts as a toggle. If you were already logged in, the display
shows AGENT LOGGED OUT OF ALL ACDS, and you hear a confirmation tone.
To log in to one or more hunt groups using the ACD Agent Login feature code:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
2
6
2. Dial
. The display shows AGENT LOGIN ACD HG #.
3. EITHER, Enter the desired ACD hunt group number.
OR, Press to log in to all of your ACD hunt groups at once. The display
#
shows AGENT LOGIN AGENT ID.
NOTE: If you entered an invalid hunt group number, the display shows NOT AN
ACD HUNT GROUP, and you hear repeating tones.
4. Do one of the following:
• To log into one or more ACD hunt groups using Agent IDs: Enter your
Agent ID. The display shows AGENT LOGGED INTO ALL ACDS. You
are logged into the ACD hunt group using Agent IDs.
• If another Agent ID is already logged in at this endpoint, you hear repeating
tones, and the display shows DIFFERENT AGENT ID ALREADY USED.
You must have the other agent log out before you can use that endpoint.
• To log into one or more ACD hunt groups not using Agent IDs: Press
. The display shows AGENT LOGGED INTO ALL ACDS. You are
#
logged into the ACD hunt group that does not use Agent IDs.
If you were already logged in, the display shows ALREADY LOGGED
INTO <hunt group>.
If you are not a member of the entered hunt group, the display shows NOT
AN AGENT IN THIS HUNT GROUP, and you hear repeating tones. Start
over.
5. Press
to return to the two-line display. Repeat this procedure to log into
additional ACD groups, if necessary.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
86
When you log in to a group, you may be automatically connected to a call after you
hear a short ring burst. If the ACD Agent ID Automatic Connect option is enabled for
your hunt group and you are using a headset, you will be automatically connected. If
this option is not enabled for your hunt group, the call will ring until you answer it or
until it times out to another extension.
NOTE: Even if the ACD Agent ID Automatic Connect option is enabled, the first call
you receive (after you log in or remove your endpoint from DND while logged in) will
ring until you answer it. You will, however, be automatically connected to subsequent
calls.
To log out of one or more ACD hunt group:
MENU
1. While in idle mode, press
to bring up the two-line display.
3
2
8
2. EITHER, Dial
to log out of all of your ACD hunt groups at
once. The display shows AGENT LOGGED OUT OF ALL ACDS, and you
hear a confirmation tone.
3
2
7
OR, Dial
. One of the following displays will appear:
• If you were logged in to only one hunt group, the display shows AGENT
LOGGED OUT OF <hunt group>. The procedure is complete.
• If you were logged in to more than one hunt group, the display shows
AGENT LOGOUT ACD NUMBER. Dial the extension number of the
desired ACD hunt group.
• If you were not logged in to any hunt group, the display shows NOT
LOGGED INTO ANY ACD GROUP.
3. Press
.
Ending an ACD Hunt Group Call
Each time you end an ACD hunt group call, a wrap-up timer is started. Until this
timer expires, you will not receive another call through any ACD hunt group. You
can, however, end the wrap-up session before this timer expires, as described below.
To terminate the ACD Agent wrap-up period before the timer expires:
3
2
9
Dial
.
NOTE: If you were not logged in to an ACD hunt group, the display shows CANNOT
ACCESS RESERVED FEATURE.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
87
NOTE: This feature is not available on the Model 8664 or 8668 endpoint.
The Push-to-Talk (PTT) feature allows Model 8665 users to broadcast and receive
voice messages among the PTT group by broadcasting the message on a shared chan-
nel, similar to the way a handheld, two-way radio operates. The endpoint supports
eight multicast channels with the current channel saved in memory on the endpoint
(see page 73).
When a member of the PTT group broadcasts a message, all members of the group
that are monitoring that channel will hear the transmission. A low-volume ring
announces the incoming call, and a system message is displayed. When you or
another member terminates a broadcast session, the endpoint remains in the receive
state.
To initiate a PTT broadcast:
1. Press and hold the Talk button and wait briefly to activate the channel before
talking.
2. You may begin talking when the display shows “Transmitting.” The display
screen shows the current active channel, and the “start transmit” sound is played.
3. Hold the endpoint two inches from your mouth and talk into the microphone.
When the Talk button is released, the endpoint then enters the waiting state
where it monitors the channel for up to ten seconds.
To receive a PTT call:
Upon receiving a PTT transmission, the phone plays the “receiving alert” sound and
enters the receive state.
In this state the phone receives all conversations on the selected channel. The phone
will ignore the Talk button while in the receive state. The screen shows the current
active channel, the caller ID information of the current transmitter, and an indication
that the phone is receiving a broadcast transmission.
At the end of a transmission, the phone enters the waiting state where it monitors the
channel for up to ten seconds and displays “Waiting” on the screen. If no other trans-
mission occurs within ten seconds the phone reverts to idle state.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
88
To make or answer a telephone call when you are in a PTT broadcast session:
Press . The PTT broadcast is pre-empted by the telephone call.
To return to an in-progress PTT broadcast session: Press
. The PTT broadcast
session becomes active again on your endpoint.
To change the volume on a PTT broadcast: Press the Up and Down volume buttons
on the side of the endpoint.
To mute a PTT broadcast:
1. Press the Mute softkey. The Mute Two-Way Radio? prompt is displayed.
2. Press the Yes softkey. To unmute the broadcast, press the Unmute softkey.
To terminate an incoming PTT broadcast:
1. Press the Terminate softkey.
2. Press the Yes softkey. PTT audio is immediately stopped for your endpoint only.
NOTE: When you terminate an incoming PTT broadcast, no other endpoint is affected,
and only the current broadcast is terminated for the endpoint you are using. You may
rejoin an active session by initiating a new PTT call.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
89
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Using Your Advanced Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Setting Up Your E-Mail Password . . . . . . . . . . . . . . . . . . . . . . . 95
Accessing E-Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Using Main Menu E-Mail Reader Count . . . . . . . . . . . . . . . . . . . 99
Accessing Fax Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Recovering Deleted Messages . . . . . . . . . . . . . . . . . . . . . . . . . 101
Changing Message Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . 102
Voice Mail Flowchart (Advanced Mailbox). . . . . . . . . . . . . . . . 103
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
91
INTRODUCTION
Enterprise Messaging (EM) is the voice processing system that provides advanced
messaging features with the E-mail Reader feature. This section provides information
and instructions about advanced mailbox tasks for users who have E-Mail Reader
enabled for their mailbox.
If your mailbox does not have E-Mail Reader enabled, you have a standard voice
these common mailbox tasks are not repeated in this section.
See the following pages for common mailbox tasks:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Initializing your mailbox (see page 27)
Recording your personal greetings (see page 28)
Accessing your mailbox (see page 44)
Disabling and enabling ASR (see page 45)
Accessing voice mail messages (see page 46)
Changing your mailbox password (see page 60)
Changing the call screening transfer method (see page 62)
Programming a fax destination (see page 63)
Changing the message search order (see page 63)
Programming remote messaging (see page 64)
Screening calls (see page 76)
Using the voice mail directory (see page 80)
NOTE: For a voice mail flowchart for standard mailbox users, see page 121.
®
Inter-Tel Model 8664/8665/8668 User Guide
92
Download from Www.Somanuals.com. All Manuals Search And Download.
E-MAIL READER FEATURES
When E-Mail Reader has been enabled for your mailbox, you have the advanced
mailbox. The advanced mailbox unifies your local voice mail messages and your
remote fax and e-mail messages in one convenient location. E-mail Reader uses Text-
If E-Mail Reader is enabled for your mailbox, you can access voice mail, e-mail, and
fax messages in your mailbox using your endpoint.
When you access an e-mail message in your mailbox, E-Mail Reader first announces
your e-mail according to the envelope options that you set (see page 102). Then, after
the envelope is played, E-Mail Reader reads the text in the body of the message. Once
you have listened to your e-mail, you can access additional options to reply, forward,
save, or delete the message (see page 97).
When you access a fax message, E-Mail Reader announces the fax envelope accord-
ing to the envelope options that you set (see page 102). Because a fax message is
received by your e-mail account as an attachment to an e-mail message in the form of
a .tif file, E-Mail Reader cannot read the text in the body of the fax. To view the
fax and read it, you must access it from your e-mail account. With your advanced
mailbox you can save, delete, and forward a fax (to another fax machine) using the
available menu options, when prompted (see page 100).
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
93
to let callers know if you are out of town, on a call, etc. You can send messages to
individuals and to a group of people if your voice mail administrator has programmed
a name for the group. In addition, various options allow you to customize your mail-
box, manage your messages, and screen your calls. To allow the system to retrieve e-
mail and fax messages from your e-mail account, you must first set up your e-mail
password (see page 95).
When you access your mailbox (see page 44), the system announces how many new
and saved voice mail, fax, and e-mail messages you have in your mailbox. You can
choose which type of message you want to access by selecting voice mail, fax, or e-
mail from the main subscriber menu.
Main menu options include the following:
1
•
•
•
•
•
•
•
To access voice mail messages: Say “Voice Mail” or press
.
2
To record voice mail messages: Say “Record” or press
.
3
To access e-mail messages: Say “E-Mail or press
.
4
.
5
To access message options: Say “Options” or press
.
6
To access facsimile messages: Say “Facsimile” or press
.
8
To disable ASR (for that call only): Say “Disable” or press
.
At any menu level, you can say “Cancel” or press
to cancel or return to the pre-
*
#
vious menu or say “Accept” or press
advanced mailbox users, see page 103.
to accept. For a voice mail flowchart for
NOTE: All of the menu options and instructions for using the advanced mailbox are
presented as voice commands and numeric entries.
®
Inter-Tel Model 8664/8665/8668 User Guide
94
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR E-MAIL PASSWORD
When E-Mail Reader is enabled for your mailbox, the EM system prompts you to
enter your e-mail password after you or your voice mail administrator does one of the
following:
•
•
Set up your mailbox (see page 27)
Change your e-mail password for your e-mail client
To access your e-mail and fax messages from your advanced mailbox, you must set
up your e-mail password. While completing the setup, you cannot use Automatic
Speech Recognition (ASR) if it is enabled for your voice mail system. To prevent oth-
ers from overhearing your password, you must use the dialpad buttons on your end-
point to set up your e-mail password.
When setting up your password, the number of times you press a button determines
which character is entered, as shown in the table on the following page. Notice that
the capital letters and lower case letters require different button presses. As you press
the buttons, the system announces the current character. For security reasons, use the
handset and not the speakerphone when you set up your e-mail password.
E-mail passwords are case-sensitive and your entry must match your e-mail password
exactly. Also, your e-mail password cannot include any characters that are not
included in the table on the following page and cannot exceed 40 characters. Check
with your administrator if you encounter any difficulties setting up your e-mail pass-
word.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
95
To enter your e-mail password:
0
NOTE: To repeat menu instructions, say “Help” or press
at any time.
ALSO: If you enter an incorrect password, or if you choose to skip setting a new E-Mail
Reader password, the Main Menu E-Mail Reader Count option (see page 99) is auto-
matically disabled to prevent having to hear the invalid password prompt for each sub-
sequent login and to protect against being locked out of your e-mail account.
1. Access your mailbox as described on page 44. The system announces that it was
unable to retrieve your e-mail and fax messages, and gives you the following
options:
#
• Say “Continue” or press
to access your mailbox without access to your
e-mail messages.
1
• Say “Password” or press
to enter your new e-mail password.
2. When prompted, enter your e-mail password using the dialpad buttons, and then
#
press
. (Refer to the table below for dialpad button descriptions.)
2
NOTE: For a description of special character locations, press
.
3. Your new password is played. You have the following options:
#
• Say “Accept” or press
to accept the password.
3
• Say “Re-enter” or press
to erase and re-enter the password.
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
0
1
a
d
g
j
-
&
c
f
(
)
_
space*
b
e
h
k
2
3
4
5
6
s
8
z
.
‘
A
D
G
J
B
E
H
K
O
Q
U
X
+
C
F
I
!
i
*
l
#
M
7
?
9
,
L
m
p
t
n
q
u
x
o
r
N
P
T
W
/
R
V
Y
S
Z
v
y
:
w
0
@
1
*Press
seven times for a blank space.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
96
ACCESSING E-MAIL MESSAGES
NOTE: By default, the message lamp on your endpoint lights when you receive a new
voice mail message. Although the lamp can be programmed for other functions, it can-
not be programmed to indicate that you have received a new e-mail message.
E-Mail Reader does not distinguish between conventional e-mail messages and meet-
ing invitations and responses. Therefore, e-mail messages and meeting messages
(including invitations, cancellations, and responses) can all be accessed by selecting
option three from the main menu.
When you access your e-mail messages, E-Mail Reader first announces the message
according to the envelope options you select (see page 102). Then E-Mail Reader
reads the text in the body of the message. After you access your message you can
replay the message, listen to the next or previous message, replay the message enve-
lope, save the message, or delete the message. In addition, you can reply to the mes-
sage or forward a copy to another recipient.
When you select the reply option, you are prompted to record a message and your
reply is sent as an attachment in the form of a .wav file. If the e-mail has multiple
recipients, you have the option of replying to just the sender, or to all of the recipients.
When you forward an e-mail message, the e-mail is converted to a fax and forwarded
to the fax destination telephone number you specify.
NOTE: The body of Outlook meeting messages contain links that E-Mail Reader inter-
prets as text. These links are displayed if you are using a third-party mail application or
Outlook Express, but they are hidden in Outlook.
EXAMPLE: For example, Sally User’s supervisor creates a Sales Team meeting invi-
tation in Outlook and sends it to Sally. Sally accepts the meeting and in the body of her
acceptance e-mail she writes, “I’m looking forward to attending.” When Sally’s supervi-
sor access Sally’s meeting acceptance using E-Mail Reader, the e-mail is announced
according to the supervisor’s e-mail envelope preferences. Then E-Mail Reader reads
Sally’s written response followed by the hidden link inserted by Outlook, “I’m looking
forward to attending. Microsoft Outlook Web Access: http://TMS-NT-EVS01/Exchange/
Sally_User/Inbox/Accepted%3A%20Sales%20Team%20Meeting-5.EML.”
®
Inter-Tel Model 8664/8665/8668 User Guide
97
Download from Www.Somanuals.com. All Manuals Search And Download.
To access your e-mail with E-Mail Reader:
0
NOTE: To repeat menu instructions, say “Help” or press
at any time.
1. Access your mailbox as described on page 44.
3
2. Say “E-Mail” or press
to listen to your e-mail messages. Then select one of
the following:
1
• Say “New” or press
• Say “Saved” or press
to listen to new messages.
to listen to saved messages.
3
NOTE: You may experience a delay if you have a large number of e-mail
messages in your in-box (for example, more than 500 messages).
3. After the e-mail envelope is played, E-Mail Reader reads the body text of the e-
mail message. While you are listening to a message, you can use the following
options:
#
• Say “Skip” or press
to skip to the end of the recording.
1
• Say “Back up” or press
to “rewind” a few seconds and replay the mes-
sage.
2
#
• Say “Pause” or press
to pause. Say “Continue” or press
to con-
tinue.
3
• Say “Forward” or press
to skip ahead.
4
• Say “Lower” or press
to lower the volume.
5
• Say “Envelope” or press
to play the message envelope.
6
• Say “Higher” or press
to raise the volume.
9
• Say “Delete Message” or press
to delete the message.
*
• Say “Cancel” or press
to return to the previous menu.
4. When E-Mail Reader has finished reading the e-mail you have the following
options:
1
• Say “Replay” or press
to replay the message from the beginning.
2
• Say “Reply” or press
to reply to the message. If the e-mail message had
more than one recipient, you have the following options:
1
–
–
–
Say “Everyone” or press
to reply to all recipients.
to reply to the sender.
2
Say “Sender” or press
Say “Hear” or press
3
to hear all recipients.
NOTE: See page 49 for recording and delivery options.
3
• Say “Forward” or press
to forward a copy of the message to a fax desti-
nation. Then say or enter the fax destination number. The system plays the
fax destination number. Select one of the following:
®
Inter-Tel Model 8664/8665/8668 User Guide
98
Download from Www.Somanuals.com. All Manuals Search And Download.
#
–
–
Say “Yes” or press
to verify the number. The system announces
that the fax is scheduled for delivery.
*
to start over.
NOTE: You cannot forward an e-mail message to a mailbox or group list.
When you forward an e-mail message, the e-mail is converted to a fax and for-
warded to the fax destination telephone number that you specify.
4
• Say “Previous” or press
to listen to the previous message.
5
• Say “Envelope” or press
to play the introductory message envelope (see
page 102 for programming instructions).
6
• Say “Next” or press
to listen to the next message.
7
• Say “Save” or press
to save the message.
9
• Say “Delete Message” or press
to delete the message.
NOTE: You may be prompted to confirm deleting the message. Say “Yes” to
delete the message or “No” to cancel the request to delete the message.
5. Hang up.
USING MAIN MENU E-MAIL READER COUNT
After you set up your E-Mail Reader account, the system announces the number of
voice mail, e-mail, and fax messages you have each time you access your mailbox
before you can listen to your messages. The voice prompt that indicates the number of
e-mail and fax messages is the “Main Menu E-Mail Reader Count” option. (Voice
mail message prompts are not included in Main Menu E-Mail Reader Count and will
always be played when you access your mailbox.)
You can disable the Main Menu E-Mail Reader Count option in your mailbox.
Disabling the Main Menu E-Mail Reader Count option defers e-mail and fax prompts
until you select the E-Mail or Fax message option from the main menu. Disabling E-
Mail Reader Count does not disable E-Mail Reader. It only defers the voice prompts
until the appropriate option is selected.
To disable or enable the Main Menu E-Mail Reader Count option:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
9
3. Say “More” or press
to select More Options.
4
4. Say “E-Mail Reader Count” or press
to select the E-Mail Reader Count
toggle option.
1
5. If E-Mail Reader Count is enabled, say “Disable” or press
to disable.
to enable.
1
If E-Mail Reader Count is disabled, say “Enable” or press
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
99
ACCESSING FAX MESSAGES
NOTE: By default, the message lamp lights when you receive a new voice mail mes-
sage. Although the lamp can be programmed for other functions, it cannot be pro-
grammed to indicate that you have received a new fax message.
When you access a fax message using option six on the main menu, E-Mail Reader
announces the fax message according to the envelope options that you selected (see
page 102). E-Mail Reader does not have the capability to read the text in a fax. You
can, however, save, delete, and forward a fax (to the fax number that you specify)
using the associated options.
To access fax messages and the associated options:
1. Access your mailbox as described on page 44.
6
2. Say “Facsimile” or press
to access your fax messages. Then select one of
the following:
1
• Say “New” or press
• Say “Saved” or press
to listen to new messages.
to listen to saved messages.
3
3. After the fax envelope is played, you have the following options:
3
• Say “Forward” or press
to forward a copy of the message to another
destination. Then say or enter the fax destination number. The system plays
the fax destination number. Select one of the following:
#
–
Say “Yes” or press
to verify the number. The system announces
that the fax is scheduled for delivery.
–
Say “No” or press
to start over.
to listen to the previous message.
*
4
• Say “Previous” or press
5
• Say “Envelope” or press
to play the introductory message envelope (see
page 102 for programming instructions).
6
• Say “Next” or press
to listen to the next message.
7
• Say “Save” or press
to save the message.
9
• Say “Delete Message” or press
to delete the message.
NOTE: You may be prompted to confirm deleting the message. Say “Yes” to
delete the message or “No” to cancel the request to delete the message.
4. Hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
100
RECOVERING DELETED MESSAGES
Recovering deleted messages varies based on media type. If you delete a voice mail
message, you can retrieve it within a specific time frame (up to 24 hours, programmed
by your voice mail administrator). The specified time frame for retrieving deleted e-
mail and fax messages is determined by the Exchange administrator. Once you
recover a deleted message, it is then restored to your saved-message queue. Deleted
voice mail, e-mail, and fax messages that are not recovered within the specified time
frames are automatically erased.
NOTE: Contact your system administrator if you want to know how long you have to
recover deleted messages.
To recover deleted messages:
1. Access your mailbox as described on page 44.
5
2. Say “Options” or press
for Message Options.
2
3. Say “Recover” or press
to access undelete options.
4. Specify which media type you would like to recover. Your options are:
1
• Say “Voice Mail” or press
to recover a voice mail message.
to recover an e-mail message.
to recover a fax message.
2
• Say “E-Mail” or press
3
• Say “Facsimile” or press
1
5. EITHER, Say “Listen” or press
to listen to your deleted messages and
choose which ones to recover. After each message you can:
1
• Say “Replay” or press
to replay the message.
2
• Say “Reply” or press
to reply to the message.
to forward the message.
to listen to the previous message.
3
4
• Say “Forward” or press
• Say “Previous’ or press
• Say “Envelope” or press
5
to play the message envelope.
6
• Say “Next” or press
to listen to the next message.
7
• Say “Recover” or press
to recover the message.
2
OR, say “Recover” or press
to recover all deleted messages.
3
OR, Say “Purge” or press
to permanently delete all deleted messages.
6. Hang up.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
101
CHANGING MESSAGE ENVELOPES
When you receive a voice, fax, or e-mail message, a message “envelope” is played.
The envelope can include the time and date the message was left, the source of the
message, and additional information that is associated with the media type. Common
envelope options for voice mail, e-mail, and fax include:
•
•
Time and Date: The time and date the message was received.
Source: The source of the voice, e-mail, or fax message.
These envelope options vary by media type:
•
•
•
Length: The recorded time, in minutes, for voice messages.
Subject: The text in the subject field for e-mail messages.
Pages: The number of pages included in the fax attachment.
By default, all of the envelope options are enabled for each type of message. How-
ever, you can change your envelope options, as described below.
To change and save your message envelope:
1. Access your mailbox as described on page 44.
4
2. Say “Personal” or press
to select the Personal Options Menu.
4
3. Say “Envelope” or press
to select the Message Envelope Options Menu.
4. Select the media type you would like to change:
1
• Say “Voice Mail” or press.
.
2
• Say “E-Mail” or press
.
3
• Say “Facsimile” or press
.
5. You can then do any of the following:
1
• Say “Time, Date” or press
to enable or disable the time and date
options.
2
• Say “Source” or press
to enable or disable the message source option.
3
• For voice mail, say “Length” or press
to enable or disable the message
length option.
3
For e-mail, say “Subject” or press
to enable or disable the subject
option.
3
For faxes, say “Pages” or press
to enable or disable the pages option.
4
• Say “All Options” or press
to enable all options and return to the Per-
sonal Options Menu.
5
• Say “None” or press
to disable the entire envelope and return to the
Personal Options Menu.
#
• Say “Accept” or press
to accept the changes.
• Say “Cancel” or press
6. Hang up.
to return to the Personal Options Menu.
*
®
Inter-Tel Model 8664/8665/8668 User Guide
102
Download from Www.Somanuals.com. All Manuals Search And Download.
VOICE MAIL FLOWCHART (ADVANCED MAILBOX)
*
NOTE: In most menus, you can say “Cancel” or press
to return to the previous menu. Say
#
“Accept” or press
to accept the option.
MAILBOX ACCESS
EITHER, Press the Mes-
sage button to respond to a
message from voice mail.
ACCESSING MESSAGES
Note: Options vary by media
type.
•
PERSONAL OPTIONS
1
Record “Greeting”
OR, Call the voice mail
While the message is playing:
1
2
3
“Primary” Greeting
“Alternate” Greeting
“System” Greeting
extension number, say
1
2
3
4
5
6
7
9
#
“Back Up”
“Login” or press
, and
say or enter your mailbox
number.
“Pause”
(See Recording Options)
•
Enter your password
Move “Forward”
“Lower” (volume)
Play the “Envelope”
“Higher” (volume)
“Save” the Message
“Delete” the Message
“Skip” to the End
2
3
Record Directory “Name”
(press
).
#
(See Recording Options)
Record “Password”
SUBSCRIBER MAILBOX MENU
4
Change “Envelope” Settings
1
2
3
4
5
6
8
“Voice Mail”
1
2
“Time, Date”
“Source”
“Record”
“E-Mail”
3
“Length/Subj./Pages”
“All Options”
“Personal” Options
“Options” Message Options
“Facsimile”
4
5
After the message:
“None”
1
2
3
4
5
6
7
9
“Replay” Message
5
9
“Remote” Messaging
“Primary” Cascade
“Alternate” Cascade
“More” Options
Fax “Number”
“Reply” to the Message
“Forward” a Copy
“Disable” ASR
1
2
Go to “Previous” Message
Play the “Envelope”
Go to “Next” Message
“Save” the Message
“Delete Message”
RECORDING OPTIONS
1
2
4
5
•
•
Dial the mailbox number,
reply to a message, or for-
ward a message.
Message “Order”
“E-Mail Rdr. Count”
“Transfer” Method
“Record” your message.
2
#
3
Pause
“Continue”
MESSAGE ORDER
“New” Messages
“Saved” Messages
TRANSFER METHOD
REMOTE MESSAGING
1
2
Note: Applies to voice mail only.
Erase
1
Program Cascade “Level”
•
After recording:
“Replay”
Enter cascade level number, then:
1
2
3
4
9
1
2
3
“Change”
“Personal” #
“Append”
1
2
3
“Unannounced”
“Screened”
“Erase,” re-record
“Copy”
“Pager” #
“Announce” Only
2
3
Enter “Time” of Day
Set “Days” of Week
“Weekdays”
Delivery “Options”
MESSAGE OPTIONS
DELIVERY OPTIONS
Note: Options vary by media
type.
1
2
3
1
2
3
#
“Private”
“Certified”
“Priority”
“Send”
All “Days”
1
Cancel “Unheard” Messages
“Recover”DeletedMessages
Individual “Day” 1-7
2
4
Select Message “Category”
1
2
3
“Voice Mail”
“E-Mail”
1
2
“All Messages”
“Priority” Messages
Send and Exit
Hang Up
“Facsimile”
®
Inter-Tel Model 8664/8665/8668 User Guide
103
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
104
SECTION CONTENTS
PAGE
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
What the Administrators Can Do for You . . . . . . . . . . . . . . . . 106
Frequently Asked Questions (FAQs) . . . . . . . . . . . . . . . . . . . . 107
Default Feature Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
105
INTRODUCTION
If you want to know more about your endpoint and voice mail system, this is the sec-
tion for you. With additional information and FAQs, you should be able to find
answers to most of your questions.
NOTE: Because the telephone system is very flexible and programmable, the proce-
dures for using the features might vary slightly from the descriptions in this guide. If so,
your trainer or system administrator can tell you how your system differs and how to
use the features.
WHAT THE ADMINISTRATORS CAN DO FOR YOU
The administrators are the people to whom you should turn if you have any problems
with your endpoint and/or voice mail. They have access to advanced programming
features and can reset certain settings associated with your endpoint.
The types of administrators that can help you with your endpoint/voice mail are as
follows:
•
System Administrator: Performs certain telephone system functions, including:
— Setting the date and time
— Programming System Speed-Dial numbers
— Making database changes, such as programming usernames, toll restriction,
DND messages, and extension numbers
•
Voice Mail Administrator: Performs tasks associated with the voice mail sys-
tem, including:
— Recording a broadcast message that is sent to all mailboxes at once
— Performing mailbox maintenance (such as changing your password)
— Customizing voice mail prompts
NOTE: For problems that are network-related, contact your network administrator.
If you are a system administrator or if you need additional information not available
in this guide, refer to your system’s administrator guide. If you are a network adminis-
trator, refer to the latest version of the IP Devices Installation Manual (part number
835.2195).
®
Inter-Tel Model 8664/8665/8668 User Guide
106
Download from Www.Somanuals.com. All Manuals Search And Download.
FREQUENTLY ASKED QUESTIONS (FAQS)
This section includes some of the most frequently asked questions. If you have prob-
lems with your endpoint or mailbox, refer to this section before you contact your sys-
Q1.
A1.
How can I retrieve messages if I don’t know the password for my voice mail?
Try using your extension number, which is your default password. Or, maybe you
don’t have a password, in which case pressing
is all you need to do. If these
#
options don’t work, contact your system administrator, who can change or erase the
password for you. You can then retrieve your messages and reset the password, if
desired (see page 60).
Q2.
A2.
How do I program System Speed-Dial numbers?
Only your system administrator can program System Speed-Dial numbers. You can,
however, program up to ten Station Speed-Dial numbers (see page 67).
Q3.
A3.
How can I set the number of rings that are allowed before the call is sent to voice
mail?
Only your system administrator can change the number of rings that are allowed
before the call is forwarded to voice mail.
Q4.
A4.
Why can’t I retrieve deleted messages?
Voice mail may have erased your message. After a programmed amount of time has
lapsed, up to 24 hours, voice mail automatically erases all deleted messages (see
page 48). If you attempted to undelete a voice mail within this time frame but you
were still unsuccessful, your voice mail system may not have sufficient space pro-
grammed to store deleted messages.
Q5.
A5.
How can I change the name displayed on my endpoint?
Only your system administrator can change the user names assigned to extensions.
Q6.
A6.
What languages do the Model 8664, 8665, and 8668 endpoints support?
Model 8664, 8665, and 8668 endpoints currently support American English only.
Q7.
A7.
Why can’t I program a Station Speed-Dial number to the softkey button I want? It
keeps saying that the button is non-programmable.
Your system administrator has programmed that softkey as a non-programmable but-
ton. Because you cannot override system programming from your endpoint, you must
choose another button.
®
Inter-Tel Model 8664/8665/8668 User Guide
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Q8.
A8.
Why don’t the local telephone company star codes (i.e.*82, *69, etc.) work when I use
the Outgoing Call access code to call an outside number?
Rather than use the Outgoing Call access code to obtain an outside line, you must dial
system is using the default Select Line Group numbers, you would have to dial 92001
to access that line. Once you have dial tone, you can dial the star code and the num-
ber.
Q9.
A9.
Why can’t I use ASR to enter my e-mail password?
pad buttons on your endpoint. See page 95 for additional information about entering
your e-mail password if E-Mail Reader is enabled for your mailbox.
Q10.
A10.
have to update it for my mailbox?
Yes. Whenever you change your e-mail password, you will be prompted to update it
for E-Mail Reader. See page 95 for additional information about entering your e-mail
password.
Q11.
A11.
Why don’t I have e-mail and fax messages in my mailbox?
If your mailbox is the standard voice mailbox (see page 20), you will not receive e-
mail and fax messages in your mailbox. To receive these types of messages, E-Mail
Reader must be enabled for your mailbox. Check with your voice mail administrator
to see if E-Mail Reader is enabled for your mailbox.
Q12.
A12.
Why do I get the wrong response when I try to complete a task by saying a command?
Several things affect the system’s response to voice commands. One reason the sys-
tem may not be responding to voice commands is that Automatic Speech Recognition
(ASR) may not be enabled on your system. If your system’s voice prompts do not
include the option to “say” a command, then ASR is not enabled. See page 23 for
additional guidelines for using ASR.
Q13.
A13.
Why can’t I use the Agent Help or Record-a-Call features?
If your endpoint is configured to use peer-to-peer (P2P) audio, you will not be able to
use the Agent Help and Record-A-Call features when you are on a P2P call. To deter-
mine if your endpoint is configured to use P2P audio, consult your system administra-
tor.
Q14.
A14.
Are accessories available for the Model 8664, 8665, and 8668 endpoints?
Yes, accessories such as belt clips, chargers, and headsets are available from the Inter-
®
Tel CommSource division. Contact your local authorized Inter-Tel provider to order
accessories.
®
Inter-Tel Model 8664/8665/8668 User Guide
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Q15.
A15.
Why can’t I use one of the features described in this guide?
There are a few reasons why you might not be able to access the feature. Some possi-
ble reasons include:
•
Your system software version may not support the feature. Check with your sys-
tem administrator to see which software version your telephone system currently
uses and if there are any features restrictions for your system.
•
•
Your system administrator may not have enabled the feature for your endpoint.
Your system administrator may have programmed your endpoint to block the fea-
ture.
Q16.
A16.
If I need further assistance, how do I get technical support?
First, contact the appropriate administrator (system, voice mail, or network) if you
have a question that is not covered in this user guide. If you need further assistance,
contact your local authorized Inter-Tel provider. Providers can be located using the
Inter-Tel Web site at www.inter-tel.com. All Inter-Tel sales, service, and support are
handled at the local level.
®
Inter-Tel Model 8664/8665/8668 User Guide
109
Download from Www.Somanuals.com. All Manuals Search And Download.
DEFAULT FEATURE CODES
Use the blank spaces below to enter custom feature codes, if necessary.
OUTSIDE LINE ACCESS CODES
ACCESS CODE NAME
Select Line Group 1-208
Automatic Route Selection
Emergency Call
ACCESS CODE
92001-92208*
92000*
NEW CODE
911 (999 in Europe)
8
Outgoing Call
*These defaults may differ depending on the software version.
EXTENSION NUMBERS
EXTENSION NAME
EXTENSION NUMBER
NEW NUMBER
Endpoint Extensions
1000-1999
2000-2299
0
Hunt Groups
Attendant
®
Inter-Tel Model 8664/8665/8668 User Guide
110
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL FEATURE CODES
FEATURE NAME
Account Code – Following Calls
Account Code – Optional
ACD Agent Log In
FEATURE CODE
391
390
326
327
328
329
375
376
351
350
355
357
356
358
5
NEW CODE
ACD Agent Log Out
ACD Agent Log In/Out
ACD Agent Wrap-Up Terminate
Agent Help Request
Agent Help Reject
Answer (Ringing Call)
Automatic Line Answer
Call Forward All Calls
Call Forward If Busy
Call Forward If No Answer
Call Forward No Answer/Busy
Conference
Default Station
394
307
300
370
371
372
373
395
336
335
330
322
323
324
365
366
368
367
314
7
Directory (IDS or Basic)
Display Time And Date
Do-Not-Disturb
Do-Not-Disturb Cancel
Do-Not-Disturb On/Off
Do-Not-Disturb Override
Feature Button Default
Hold – Individual
Hold – System
Hookflash (Recall in Europe)
Hunt Group Remove
Hunt Group Replace
Hunt Group Remove/Replace
Message
Message – Cancel Message Left
Message – Cancel Message On Endpt
Message – Silent Message
Microphone Mute On/Off
Page
Program Buttons
397
392
6
Program Station Password
Queue (Callback) Request
Record-A-Call
385
380
331
Redial
Redirect Call
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
111
FEATURE NAME
FEATURE CODE
NEW CODE
Reminder Message
305
306
359
4
Reminder Message Cancel
Remote Programming
Reverse Transfer (Call Pick-Up)
Review Buttons
396
377
398
304
382
383
352
353
354
381
346
345
Ring Intercom Always On/Off
Ring Tone Selection
Routing Off
Station Speed Dial
Station Speed-Dial Programming
System Forward Enable
System Forward Disable
System Forward On/Off
System Speed Dial
Transfer To Hold
Transfer To Ring
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
112
NOTES
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
113
®
Inter-Tel Model 8664/8665/8668 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Index
Call Pickup (Reverse Transfer) 37
A
Abbreviations
Calls
ending ACD 87
making 30, 32
About This Guide
making conference 35
picking up (reverse transferring) 37
placing a non-handsfree 31
placing on hold 34
About Voice Mail 22
About Your Endpoint
Accessing
e-mail messages 97
fax messages 100
receiving 32, 33
returning to a held caller 34
waiting for called endpoint 30, 31
Camp On 30, 31
Accessing Your Endpoint 83
Account Codes 75
ACD Hunt Groups 85
Administrators 106
call forwarding 38
callback requests 30, 31
messages 42
queue requests 32
Advanced Mailbox
Cascade Levels 64
using 94
Changing
voice mail flowchart 103
Agent Help 84
Agent IDs 85
e-mail password 96
keymaps 66
personal greeting 29
transfer method 62
Alternate Greeting 28
Automatic Call Answer 66
Automatic System Forwarding 39
B
Backlight
9
Battery Release Buttons
Buttons
voice mail message envelope 61
battery release
feature
8
Conference Calls 35
function 10
line 11
menu
9
D
message 42
power off 26
power on 26
PTT (Push-to-Talk)
softkeys 10
Date, Time, Name, and Extension Number 41
Default Feature Codes 103
Defaults 66, 74
8
do-not-disturb message chart 52
mailbox password 27
up and down volume 8, 66
®
Inter-Tel Model 8664/8665/8668 User Guide
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Station Speed-Dial Numbers 68
Delivery Options 50
system forwarding 39
enabling and disabling 99
Desktop Charger 15
Dial Tones 24
Dialpad Buttons
Directories
Basic Search 79
Telephone 77
using 79
voice mail 80
Disabling
account codes 75
do-not-disturb 52
handsfree 32, 33
cascade levels 64
do-not-disturb 52
handsfree 32, 33
record-a-call 71
system forwarding 39
Display
Displaying
date and time 41
9
record-a-call 71
ring intercom always 31
Flowchart
feature buttons 74
advanced mailbox 103
speed-dial numbers 69
Dropping Out of a Conference 35
Full Mailbox 44
E
Electro Magnetic Interference/Compatibility
E-Mail Messages 97
Enabling
x
3
H
account codes 75
automatic call answer 66
cascade levels 64
Handsfree Mode 32, 33
Headset Jack 11
do-not-disturb 52
Hold 35
handsfree 32, 33
Hookflash 73
hunt group calls 85
record-a-call 71
Hunt Group Calls Enabled/Disabled 85
Hunt Groups 86
®
Inter-Tel Model 8664/8665/8668 User Guide
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Model 8668, Illustration
Modes
I
active 12
IC Line 11
Idle Mode 12
Illustration
idle 12
model 8664
model 8665
model 8668
4
5
Introduction 56
On-Hook 24
L
Last Number Dialed/Saved 40
Leaving Messages 42
Line Button 8, 11
calls 32
Liquid Crystal Display (LCD)
Listening to Messages 46
Logging In and Out of ACD Hunt Groups 86
Low Battery
Paging 72
icon 13
message 13
M
Mailbox Almost Full/Full 44
Main Menu E-Mail Reader Count 99
Making
outside calls 32
and receiving calls 30
emergency calls 33
Power Off Button 8, 26
Power On Button 8, 26
Primary Greeting 28
Programming
pages 72
Manual Call Forwarding 38
Members, Hunt Group 85
Menu Button 8,
Message
9
feature 42
feature buttons 73
search order 63
Messages
programmable softkeys 73
remote feature access 82
remote messaging 64
ring intercom always 31
secondary extension buttons 74
softkeys as feature buttons 73
Push-to-Talk (PTT)
listening 46
listening to messages 46
receiving 46
recording and sending voice mail messages 49
recovering deleted 101
Messaging, Remote 44, 64
Microphone 35, 41
button/feature
8
Q
Model 8664, illustration
Model 8665, illustration
4
5
Queue the Line 30, 31
®
Inter-Tel Model 8664/8665/8668 User Guide
117
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Receiving
outside calls 33
Record-A-Call 71
Recording
Recording Personal Greetings 28
Redialing a Number 40
Redirecting Calls 39
Remote Messaging 44, 64
Telephone Directory 77
Time Out 24
Up and Down Volume Buttons 8, 66
Requesting
a reminder message 54
Responding To
mute feature 41
a waiting call 33
agent help requests 84
Retrieving Messages 43
Returning
Reverse Transfer (Call Pickup) 37
record-a-call 71
speaker and microphone 41
administrator 20
S
messages 30, 31
Voice Mail Flowchart
Sending Messages 49
Setting
account codes 75
preferences 56
your e-mail password 95
SMDR (Station Message Detail Recording) 75
Softkeys 10
Speaker 41
Specific Absorption Rate (SAR) Information vii
Speed Dialing 67
Waiting Calls 33
What the Administrators Can Do for You 106
What You See and Hear 24
Working in Hunt Groups 85
Wrap-Up Timer 87
Standard Account Codes 75
Station Message 30, 31
Station Message Detail Recording (SMDR) 75
Z
Zones, Page 72
®
Inter-Tel Model 8664/8665/8668 User Guide
118
Download from Www.Somanuals.com. All Manuals Search And Download.
VOICE MAIL FLOWCHART (STANDARD VOICE MAILBOX)
NOTE: At any menu level, you can say “Cancel” or press
to cancel or return to the previous
#
menu or say “Accept” or press
to accept.
MAILBOX ACCESS
LISTENING TO MESSAGES
•
•
EITHER, Press the Mes-
sage button to respond to a
message from voice mail.
OR, Call the voice mail
extension number, say
While the message is playing:
PERSONAL OPTIONS
Record “Greeting”
1
2
3
4
5
6
7
9
#
“Back Up”
1
“Pause”
1
2
3
“Primary” Greeting
“Alternate” Greeting
“System” Greeting
“Login” or press
, and
Move “Forward”
“Lower” (volume)
Play the “Envelope”
“Higher” (volume
“Save” the Message
“Delete” the Message
“Skip” to the End
say or enter your mailbox
number.
Enter your password
(See Recording Options)
(press
).
#
2
3
Record Directory “Name”
(See Recording Options)
SUBSCRIBER MAILBOX MENU
Record “Password”
1
2
3
4
5
8
“New” Message
“Record”
4
Change “Envelope” Settings
1
2
3
4
5
“Time, Date”
Message “Source”
Message “Length”
“All Options”
“Saved” Messages
“Personal” Options
“Message” Options
“Disable” ASR
After the message:
1
2
“Replay” Message
“Reply” to the Message
“VoiceMail”Message
“Call Back”
1
2
“None”
5
9
“Remote” Messaging
“Primary” Cascade
“Alternate” Cascade
“More” Options
Fax “Number”
RECORDING OPTIONS
3
“Forward” a Copy
1
2
•
•
Dial the mailbox number,
reply to a message, or for-
ward a message.
(See Recording Options)
4
5
6
7
9
Go to “Previous” Message
“Record” your message.
Play the “Envelope”
Go to “Next” Message
“Save” the Message
“Delete Message”
1
2
5
2
#
3
Pause
Message “Order”
“Transfer” Method
“Continue”
Erase
•
After recording:
“Replay”
MESSAGE ORDER
“New” Messages
“Saved” Messages
REMOTE MESSAGING
1
2
3
4
9
1
2
1
Program Cascade “Level”
“Append”
Enter cascade level number, then:
“Erase,” re-record
“Copy” (EM Only)
Delivery “Options”
1
2
3
“Change”
“Personal” #
TRANSFER METHOD
1
2
3
“Unannounced”
“Screened”
“Pager” #
2
3
Enter “Time” of Day
Set “Days” of Week
“Weekdays”
DELIVERY OPTIONS
“Private”
“Announce” Only
1
MESSAGE OPTIONS
1
2
3
2
3
#
“Certified”
1
Cancel “Unheard” Messages
“Recover”Deleted Messages
All “Days”
“Priority”
2
Individual “Day” 1-7
“Send”
1
2
3
4
“Listen”
Select Message “Category”
Copy (non-EM systems)
Send and Exit
#
1
“Recover” All
“Purge” All
“All Messages”
Hang Up
2
“Priority” Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Part No. 935.4522
Issue 11, March 2006
A:46/5633A
Download from Www.Somanuals.com. All Manuals Search And Download.
|