Spectra BlueScale Vision
Camera User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CHAPTER 1 INTRODUCTION..............................................................................................1
Installation - Network Camera.........................................................................................5
CHAPTER 5 WEB-BASED MANAGEMENT.....................................................................25
Connecting to Network Camera.....................................................................................25
Welcome Screen...............................................................................................................26
Network Screen................................................................................................................29
Video & Audio Screen.....................................................................................................35
User Database Screen......................................................................................................39
Status Screen....................................................................................................................50
Log Screen........................................................................................................................52
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems...........................................................................................................................64
APPENDIX A SPECIFICATIONS........................................................................................66
Copyright Notice..............................................................................................................68
Streaming Video/Audio through Internet Camera.......................................................79
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
1
Introduction
This Chapter provides details of the Network Camera's features, components and capabilities.
Overview
The Network Camera has an Integrated Microcomputer and a high quality CMOS digital-Image-Sensor, enabling it to display high
quality live streaming video over your wired LAN, the Internet, and for the Network Camera, an 802.11g Wireless LAN.
Using enhanced MPEG-4 technologies, the Network Camera is able to stream high quality video and audio directly to your PC. The
high compression capabilities of MPEG-4 reduce network bandwidth requirements to amazingly low levels.
A convenient and user-friendly Windows program is provided for both viewing and recording video. If necessary, you can even view
video using your Web Browser, on a variety of software platforms.
Figure 1: Network Camera
Features
•
Standalone Design. The Network Camera is a standalone system with built-in CPU and Video encoder. It requires only a
power source and a connection to your LAN or Wireless LAN.
•
•
Dual Video Support. The Network Camera can support both MEPG4 and MJEPG video for different image compression.
Stream Live Video to Multiple Users. The MPEG4 encoder and HTTP server built into the camera generate a ready-to-view
video stream. Just connect to the camera using your Web browser or the provided Windows utility to view live video.
•
•
•
Suitable for Home, Business or Public Facilities. Whether for Home, Business or Public Facility surveillance, or just for
entertainment and fun, the Network Camera has the features you need.
Multi-Protocol Support. Supporting TCP/IP networking, SMTP (E-mail), HTTP and other Internet related protocols, the
Network Camera can be easily integrated into your existing network.
Easy Configuration. A Windows-based Wizard is provided for initial setup. Subsequent administration and management can
be performed using a standard web browser. The administrator can configure and manage the Network Camera via the LAN or
Internet.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Viewing/Recording Utility. A user-friendly Windows utility is provided for viewing live video. For periods when you are
absent, or for scheduled recording, this application also allows you to record video to an ASF file on your PC. The recorded files
are in a standard Windows Media format, and thus usable by a wide variety of programs if required. Up to 5 users can view the
live video simultaneously by using the provided utility.
•
•
Motion Detection. This feature can detect motion in the field of view. The Network Camera will compare consecutive frames
to detect changes caused by the movement of large objects. This function only works indoors due to the sensitivity of the CMOS
sensor. When motion is detection, an E-mail alert can be sent, or some other action may be triggered.
Flexible Scheduling. You can limit access to the video stream to specified times using a flexible scheduling system. The
Motion Detection feature can also have its own schedule, so it is active only when required.
•
•
Syslog Support. If you have a Syslog Server, the Network Camera can send its log data to your Syslog Server.
Audio Support. You can listen as well as look! Audio is encoded with the video if desired. You can use either the built-in
microphone or an external speaker.
Internet Features
•
User-definable HTTP port number. This allows Internet Gateways to use "port mapping" so the Network Camera and a Web
Server can share the same Internet IP address.
•
DDNS Support. In order to view video over the Internet, users must know the Internet IP address of the gateway used by the
Network Camera. But if the Gateway has a dynamic IP address, DDNS (Dynamic DNS) is required. Since many existing
Gateways do not support DDNS, this function is incorporated into the Network Camera.
•
NTP (Network-Time-Protocol) Support. NTP allows the Network Camera to calibrate its internal clock from an Internet
Time-Server. This ensures that the time stamp on Video from the Network Camera will be correct.
Security Features
•
User Authentication. If desired, access to live video can be restricted to known users. Users will have to enter their username
and password before being able to view the video stream. Up to 20 users can be entered in the user database.
•
Password-Protected Configuration. Configuration data can be password protected, so that it only can be changed by the
Network Camera Administrator.
Wireless Features (Wireless Model Only)
•
•
•
•
•
•
Standards Compliant. The Network Camera complies with the IEEE802.11g (DSSS) specifications for Wireless LANs.
Supports both 802.11b and 802.11g Standards. The Network Camera supports both 802.11b and 802.11g standards.
Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are supported.
Wired and Wireless Network Support. The Network Camera supports either wired or wireless transmission.
WEP Support. Full WEP support (64/128 Bit) on the Wireless interface is provided.
WPA/WPA2 Support. The WPA Personal/WPA2 Personal standard is also supported, allowing advanced encryption of
wireless data.
•
WPS Support. The Network Camera supports WPS (Wi-Fi Protected Setup) PBC (Push Button Configuration) mode and Pin
Code mode (numeric code). It makes the security feature easier to configure.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Physical Details - Network Camera
Front - Network Camera
Lens
No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remain
clean. The image quality is degraded if the lens cover is dirty or smudged.
The built-in microphone is mounted on the front.
On - Power on.
Microphone
Power LED
(Green)
Off - No power.
Blinking - The Power LED will blink during start up. This will take 15 to 20 seconds.
Off - Camera is not capturing video.
Active LED
(Green)
Blinking - Camera is capturing video
Network LED
(Green)
Off - Wireless or LAN is not connected or camera is not sending/receiving data.
Blinking - Data is being transmitted or received via the LAN or Wireless connection.
Side - Network Camera
Antenna
For the Wireless Network Camera, attach the supplied antenna here. The antenna is adjustable; best results
are usually obtained with the antenna positioned vertically.
Rear - Network Camera
Power Input
Connect the supplied 5V power adapter here. Do not use other power adapters; doing so may damage the
camera.
Speak
MIC
If required, an external speaker can be plugged in here.
If required, an external microphone can be attached here. Attaching a microphone here will disable the
built-in microphone on the front. Microphones designed to be used with PCs are usually compatible with
this microphone input.
LAN port
Use a standard LAN cable to connect your Network Camera to a 10/100BaseT hub or switch.
Note:
•
Plugging in the LAN cable will disable the Wireless interface. Only 1 interface can be active at any
time.
•
The LAN cable should only be connected or disconnected when the camera is powered OFF. Attaching
or detaching the LAN cable while the camera is powered on does NOT switch the interface between
wired and wireless.
Reset Button
This button is recessed; you need a pin or paper clip can be used to depress it. It can be activated at any
time the camera is in the "ready" mode.
•
•
•
WPS PBC Mode (Wireless Model Only). For the Network Camera, when pressed and released (less
then 3 seconds), the Network Camera will be in the WPS PBC mode (Auto link mode).
WPS Pin Code Mode (Wireless Model Only). For the Network Camera, when pressed and held for
over 3 seconds, the Network Camera will be in the WPS Pin Code mode.
Reset to manufacturer default value and reboot. When pressed and held over 10 seconds, the
settings of Network Camera will be set to their default values.
Note:
After this procedure is completed, the Power LED will blink three times to confirm that the reset was
completed successfully.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately.
1. Network Camera
2. Antenna (Wireless Model Only)
3. Power adapter
4. Installation CD-ROM
5. Quick Installation Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
2
Basic Setup
This Chapter provides details of installing and configuring the Network Camera.
System Requirements
•
•
To use the wired LAN interface, a standard 10/100BaseT hub or switch and network cable is required.
To use the Wireless interface, other Wireless devices must be compliant with the IEEE802.11b or IEEE802.11g specifications. All
Wireless stations must use compatible settings.
The default Wireless settings are:
Mode: Infrastructure
SSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
Installation - Network Camera
1. Assemble the Camera
Screw the supplied antenna to the mounting point on the rear.
Attach the Camera Mount to the camera.
2. Connect the LAN Cable
Connect the Network Camera to a 10/100BaseT hub or switch, using a standard LAN cable.
For the Wireless Network Camera, plugging in the LAN cable
will disable the Wireless interface. Only 1 interface can be
active at any time.
The LAN cable should only be connected or disconnected
when the camera is powered OFF. Attaching or detaching the
LAN cable while the camera is powered on does NOT switch
the interface between wired and wireless.
The first time you connect to the camera, you should connect
the LAN cable and configure the Wireless Network Camera
with appropriate settings. Then you can unplug the LAN cable
and power off the camera. The Wireless Network Camera will
be in wireless interface when you power on the camera again.
3. Power Up
Connect the supplied 5Vpower adapter to the Network Camera and power up. Use only the power adapter provided. Using a
different one may cause hardware damage.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Check the LEDs
•
The Power LED will turn on briefly, then start blinking. It will blink during startup, which takes 15 to 20 seconds. After startup is
completed, the Power LED should remain ON.
•
The Network LED should be ON.
Setup using the Windows Wizard
Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the Network Camera even
if its IP address is invalid for your network. You can then configure the Network Camera with appropriate TCP/IP settings for your
LAN.
Subsequent administration can be performed with your Web browser, as explained in Chapter 5 - Web-based Management.
Setup Procedure
1. Insert the supplied CD-ROM into your drive. If the setup program does not start automatically, run NetworkCamera.exe in the
NetworkCamera folder on the documentation CD that accompanied your library.
•
•
You will see the Welcome screen shown below.
Click the Setup Camera button to start the setup Wizard.
Figure 2: Welcome Screen
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The next screen, shown below, will list all the Network Cameras on your LAN.
Figure 3: Camera List Screen
•
•
Select the desired Camera from the list on the left. The current settings for the selected Camera will be displayed in the table
on the right.
Click Next to continue.
3. You will be prompted to enter the Administrator Name and Administrator Password, as shown below.
•
•
If using the default values, enter administrator for the name, and leave the password blank.
Otherwise, enter the Administrator Name and Administrator Password set on the Maintenance screen.
Figure 4: Password Dialog
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. This screen allows you to enter a suitable Description, and set the correct Time Zone, Date, and Time. Make any desired
changes, then click Next to continue.
Figure 5: Camera Settings
5. On the following IP Address Settings screen, shown below, choose Fixed IP Address or Dynamic IP Address.
Figure 6: Fixed or Dynamic IP Selection
•
•
Fixed IP Address is recommended, and can always be used.
Dynamic IP Address can only be used if your LAN has a DCHP Server.
Click Next to continue.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
6. If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed.
Figure 7: TCP/IP Settings
•
•
•
Enter an unused IP Address from within the address range used on your LAN.
The Subnet Mask and Default Gateway fields must match the values used by PCs on your LAN.
The Primary DNS address is required in order to use the E-mail alert or Dynamic DNS features. Enter the DNS (Domain
Name Server) address recommended by your ISP.
•
The Secondary DNS is optional. If provided, it will be used if the Primary DNS is unavailable.
Click Next to continue.
7. The next screen, shown below, displays all details of the Network Camera.
•
•
Click Next if the settings are correct
Click Back to modify any incorrect values.
Figure 8: Save Settings
9
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click OK to confirm that you want to save the new settings. If you want to cancel your changes, click Cancel.
Figure 9: Confirm Screen
9. After clicking OK, you will see the screen below.
Figure 10: Final Screen
Clicking the Install Utility button will install the Viewing/Recording utility described in Chapter 6 - Windows Viewing/Recording
Utility.
10. Click Exit to end the Wizard.
Setup is now complete.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
3
Viewing Live Video
This Chapter provides basic information about viewing live video.
Overview
After finishing setup via the Windows-based Wizard, all LAN users can view live video using Internet Explorer on Windows.
This Chapter has details of viewing live video using Internet Explorer.
But many other powerful features and options are available:
•
To view multiple cameras simultaneously, or record video (either interactively or by schedule), you should install the Windows
Viewing/Recording utility. Refer to Chapter 6 - Windows Monitor/Playback/IP Recorder Utility for details on installing and
using this program.
•
•
The camera administrator can also adjust the Video Stream, and restrict access to the video stream to known users by requiring
viewers to supply a username and password. See Chapter 4 - Advanced Viewing Setup for details.
To make Live Video from the camera available via the Internet, your Internet Gateway or Router must be configured correctly.
Requirements
To view the live video stream generated by the Network Camera, you need to meet the following requirements:
•
•
Windows 98/98SE, Windows 2000, Windows XP/Vista.
Internet Explorer 6 or later.
Connecting to a Camera on your LAN
To establish a connection from your PC to the Network Camera:
1. Use the Windows utility to get the IP address of the Network Camera.
2. Start Internet Explorer.
3. In the Address box, enter "HTTP://" and the IP Address of the Network Camera.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When you connect, the following screen will be displayed.
Figure 11: Home Screen
5. Click View Video.
6. If the Administrator has restricted access to known users, you will then be prompted for a username and password.
Enter the name and password assigned to you by the Network Camera administrator.
7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the
example below.
You must install this ActiveX component (OCX or CAB file) in order to view the Video stream in Internet Explorer.
Click the "Yes" button to install the ActiveX component.
Figure 12: ActiveX OCX Prompt
8. Video will start playing automatically. There may be a delay of a few seconds while the video stream is buffered.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Camera via the Internet
You can NOT connect to a camera via the Internet unless the camera Administrator has configured both the
camera and the Internet Gateway/Router used by the camera.
See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for details of the required configuration.
Also, you need a broadband Internet connection to view video effectively. Dial-up connections are NOT supported.
To establish a connection from your PC to the Network Camera via the Internet:
1. Obtain the following information from the Administrator of the camera you wish to connect to:
•
•
•
Internet IP Address or Domain Name of the camera.
Port number for HTTP connections.
Login (username, password) if required.
2. Start Internet Explorer.
3. In the Address box, enter the following:
HTTP://Internet_Address:port_number
Where Internet_Addressis the Internet IP address or Domain Name of the camera, and port_numberis the port number
used for HTTP (Web) connections to the camera.
Examples using an IP address:
HTTP://203.70.212.52:1024
Where the Internet IP address is 203.70.212.52and the HTTP port number is 1024.
Example using a Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Domain name (using DDNS in this example) is mycamera.dyndns.tvand the HTTP port number is 1024.
4. When you connect, the following screen will be displayed.
Figure 13: Home Screen
5. Click View Video.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6. If the Administrator has restricted access to known users, you will then be prompted for a username and password.
Enter the name and password assigned to you by the Network Camera administrator.
7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the
example below.
You must install this ActiveX component (OCX or CAB file) in order to view the Video stream in Internet Explorer.
Click the "Yes" button to install the ActiveX component.
Figure 14: ActiveX OCX Prompt
8. Video will start playing automatically. There may be a delay of a few seconds while the video stream is buffered.
Viewing Live Video
After installing the ActiveX component, you will be able to view the live video stream in its own window, as shown below.
Figure 15: View Video Screen
There are a number of options available on this screen, accessed by select list, button or icon. See the table below for details.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
General Options
These options are always available, regardless of the type of camera you are connected to.
Camera Patrol. Move through the Preset positions in the sequence defined
by the Camera Administrator.
Camera Auto Pan. Click this to have the camera moved from left to right
automatically.
Motion Detection. Click this button to have the camera moved to the
Motion Detection Preset position.
Direct P/T. Use this to move the camera to the Pan/Tilt position directly.
Resolution. Use this drop-down list to select the desired video size.
Zoom. A digital zoom feature is available. To zoom in on a section of the
window, click this icon. Then use your mouse to select the section you want
to magnify. Click the icon again to disable the zoom feature.
Snapshot. Click this to take a single JPEG "snapshot" image of the current
video.
Flip. Click this to have the image swapped top-to-bottom.
Mirror. Click this to have the image swapped left-to-right.
Audio On. This icon is displayed if audio is On. Click on the icon to turn
audio Off.
Volume. If audio is enabled, use this slider to adjust the volume.
Setup. Select the desired setup format from the drop-down list.
Preset Points. Select the desired Preset points.
Move Control. Use this to move the camera to the desired position. There
may a short delay after clicking the desired icon. You should wait a couple
of seconds rather than click again.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
4
Advanced Viewing Setup
This Chapter provides information about the optional settings and features for viewing video via the Network
Camera. This Chapter is for the Camera Administrator only.
Introduction
This chapter describes some additional settings and options for viewing live Video:
•
•
•
•
Adjusting the video image
Controlling user access to the live video stream
Making video available from the Internet
Using the Motion Detection feature
Adjusting the Video Image
If necessary, the Network Camera Administrator can adjust the Video image.
To Adjust the Video Image:
1. Connect to the Web-based interface of the Network Camera. (See Chapter 5 - Web-based Management for details.)
2. Select Administration, then Video & Audio. You will see a screen like the example below.
Figure 16: Video & Audio Screen
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Make the required adjustments, as explained below, and save your changes.
MPEG-4 Settings
Resolution
Select the desired video resolution format. The default resolution is set to 320*240.
•
•
Constant Bit Rate: Select the desired bit rate. The default is set to 1.2 Mbps.
Fixed Quality: Select the desired option. The default fix quality is set to Normal.
Video Quality
Control
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note that you can specify EITHER the
Bandwidth OR the Frame Rate, not both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default values for bandwidth is Unlimited, which allows you to specify the desired frame rate.
MJPEG Settings
Resolution
Select the desired video resolution format. The default resolution is set to 320*240.
Select the desired fix quality. The default fix quality is set to Normal.
Fixed Video
Quality
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note that you can specify EITHER the
Bandwidth OR the Frame Rate, not both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default value for bandwidth is Unlimited, which allows you to specify the desired frame rate.
Mobil Settings
Enable Mobil
Streaming
Enable streaming video for the mobile device by checking this checkbox.
The default resolution is set to 160x120.
Resolution
•
•
Constant Bit Rate: Select the desired fix bit rate.
Video Quality
Control
Fixed Quality: Select the desired option. The default fix quality is set to Normal.
Max. Frame Rate
Access Code
Select the desired Maximum bandwidth for the video stream.
Enter the code for accessing the live video from camera through cell phone connection.
Video Adjustment
Power Line
Frequency
Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under
florescent lighting.
White Balance
Brightness
Select the desired option to match the current environment and lighting.
If necessary, you can adjust the brightness to obtain a better image. For example, if the camera is facing a
bright light, the image may be too dark. In this case, you can increase the brightness.
Sharpness
Options
Select the desired option for the sharpness. You can select a Sharpness value between -3 and 3.
Microphone
Audio Type
Speaker
Enable audio by checking this checkbox. Using Audio will increase the bandwidth requirements slightly.
Select the desired audio type.
Enable speaker sound by checking this checkbox.
Time Stamp
Text Display
If enabled, the current time will be displayed on the Video image.
Enable this setting if you want text to be displayed on the Video image, and enter the desired text - up to 20
characters. This feature is often used to identify each camera when multiple cameras are installed.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling User Access to the Video Stream
By default, anyone can connect to the Network Camera and view live Video at any time.
If desired, you can limit access to scheduled times, and also restrict access to known users.
To Control User Access to Live Video:
1. Connect to the Web-based interface of the Network Camera. (See Chapter 5 - Web-based Management for details.)
2. Select Administration, then Video Access.
3. Set the desired options for Access.
Access
If the Video Access is disabled, users cannot connect using either their Web Browser or the Windows utility. However, viewing video
is still possible by logging in as the Administrator.
Figure 17: Controlling User Access
See Chapter 5 - Web-based Management for further details about using the Video Access and User Database screens.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Video available from the Internet
If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and Broadband modem, you can make the
Network Camera available via the Internet. You will need to configure your Router or Gateway to allow connections from the Internet
to the camera.
Router/Gateway Setup
Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from Internet Viewers) to the Network
Camera. The Router/Gateway uses the Port Number to determine which incoming connections are intended for the Network Camera.
This feature is normally called Port Forwarding or Virtual Servers, and is illustrated below. The Port Forwarding/Virtual Server entry
tells the Router/Gateway that incoming TCP connections on port 1024 should be passed to the Network Camera. If necessary, check
the user manual for your Router/Gateway for further details.
Figure 18: Connecting via the Internet
The "Port" for the Port Forwarding / Virtual Server entry
above is the " Secondary Port" number specified on the
Network screen of the Network Camera.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera Setup
The Network Camera configuration does NOT have be changed, unless:
•
•
You wish to change the port number from the default value (1024).
You wish to use the DDNS (Dynamic DNS) feature of the Network Camera.
HTTP Port Configuration
Normally, HTTP (Web) connections use port 80. Since the Network Camera uses HTTP, but port 80 is likely to be used by a Web
Server, you can use a different port for the Network Camera. This port is called the Secondary Port.
The default Secondary Port is 1024. If you prefer to use a different port number, you can specify the port number on the Network
Camera's Network screen, as shown below.
Figure 19: Network Screen
See Chapter 5 - Web-based Management for further details on using the Network screen.
Viewers need to know this port number in order to connect
and view live Video, so you must inform viewers of the
correct port number.
DDNS (Dynamic DNS)
Many Internet connections use a "Dynamic IP address", where the Internet IP address is allocated whenever the Internet connection is
established.
This means that other Internet users don't know the IP address, so can't establish a connection.
DDNS is designed to solve this problem, by allowing users to connect to your LAN using a domain name, rather than an IP address.
To use DDNS:
1. Register for the DDNS service with a supported DDNS service provider. You can then apply for, and be allocated, a Domain
Name.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter and save the correct DDNS settings on the DDNS screen of the Network Camera.
Figure 20: DDNS Screen
3. Operation is then automatic:
•
The Network Camera will automatically contact the DDNS server whenever it detects that the Internet IP address has
changed, and inform the DDNS server of the new IP address.
•
Internet users can then connect to the camera using the Domain Name allocated by the DDNS service provider.
Viewing Live Video via the Internet
Clients (viewers) will also need a broadband connection; dial-up connections are NOT recommended.
Viewing Live Video Using your Web Browser
If using your Web browser, you need to know the Internet IP address (or the Domain name) of the camera's Router/Gateway, and the
correct port number.
Enter the Internet address of the Router/Gateway, and its port number, in the Address (or Location) field of your Browser.
Example - IP address:
HTTP://203.70.212.52:1024
Where the Router/Gateway's Internet IP address is 203.70.212.52and the "Secondary Port" number on the Network Camera is
1024.
Example - Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Router/Gateway's Domain name is mycamera.dyndns.tv and the "Secondary Port" number on the Network Camera is
1024.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Live Video with the Viewing/Recording Utility
If using the Windows Viewing/Recording Utility, the details of the Network Camera must be entered on the Camera Setup screen.
Figure 21: Add Camera from Internet
See Chapter 6 - Windows Monitor/Playback/IP Recorder Utility for full details on using the Windows Viewing/Recording utility.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion Detection Alerts
The Motion Detection feature can generate an Alert when motion is detected.
The Network Camera will compare consecutive frames to detect changes caused by the movement of large objects.
But the motion detector can also be triggered by:
•
•
Sudden changes in the level of available light
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations where there is good steady illumination, and the
camera is mounted securely. It cannot be used outdoors due to the sensitivity of the CMOS sensor.
To Use Motion Detection Alerts
Using the Web-based interface on the Network Camera, select the Motion Detection screen, then configure this screen as described
below.
Figure 22: Motion Detection
1. Enable the Motion Detection feature.
2. Set the area or areas of the video image to be examined for movement. You can define up to 4 areas, and set the motion threshold
individually for each area.
3. If using a schedule, define the desired schedule in Event Trigger screen.
4. Save your changes.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select the E-Mail screen to have alerts sent by E-mail:
•
•
•
Enable and enter at least one (1) E-mail address
Select or enter the desired options for Video Attachment, Show "From" as and Subject fields.
Enter details of the SMTP Server used to send the E-mail.
If the Motion Detection feature is enabled, but E-Mail is not
enabled, then the only action when motion is detected is to
log this event in the system log.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
5
Web-based Management
This Chapter provides Setup details of the Network Camera’s Web-based Interface. This Chapter is for the Camera
Administrator only.
Introduction
The Network Camera can be configured using your Web Browser. The Network Camera must have an IP address which is compatible
with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as described in Chapter 2 - Basic Setup.
Connecting to Network Camera
•
•
If using only your Web Browser, use the following procedure to establish a connection from your PC to the Network Camera:
Once connected, you can add the Network Camera to your Browser's Favorites or Bookmarks.
Connecting using your Web Browser
1. Use the Windows utility to get the IP address of the Network Camera.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Network Camera.
4. You will then be prompted for a username and password.
•
•
If using the default values, enter administrator for the name, and leave the password blank.
Otherwise, enter the Administrator ID and Administrator Password set on the Maintenance screen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome Screen
When you connect, the following screen will be displayed.
Figure 23: Welcome Screen
The menu options available from this screen are:
•
•
View Video - View live Video using your Web Browser. See Chapter 3 - Viewing Live Video for details.
Administration - Access the Administration menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Administration Menu
Clicking on Administration on the menu provides access to all the settings for the Network Camera.
The Administration menu contains the following options:
Setup
•
•
•
•
System
Network
Wireless (Wireless Model Only)
DDNS
Video & Audio
•
•
•
•
Video & Audio
Video Access
User Database
Pan/Tilt
Event
•
•
•
•
•
Motion Detection
E-Mail
FTP
HTTP
Event Trigger
Administration
•
•
•
Maintenance
Status
Log
27
Download from Www.Somanuals.com. All Manuals Search And Download.
System Screen
After clicking Administration on the main menu, or selecting System on the Administration menu, you will see a screen like the
example below.
Figure 24: System Screen
Data - System Screen
System Settings
Device ID
This displays the name for the Network Camera.
Camera Name
Description
Date & Time
Date Format
Enter the desired name for the Network Camera.
This field is used for entering a description, such as the location of the Network Camera.
Select the desired date format, it will also be used to display the date and time as an overlay on the video
image.
The abbreviations used to predefine the date formats are list as follows:
•
•
•
YYYY-MM-DD = Year-Month-Day, e.g. 2006-01-31
MM/DD/YYYY = Month/Day/Year, e.g. 01/31/2006
DD/MM/YYYY = Day/Month/Year, e.g. 31/01/2006
Current
This displays the current date and time on the camera.
Date & Time
If it's not correct, click the Change button to modify the date/time settings. This button will open a sub-screen
where you have 2 options:
•
•
Set the camera's date and time to match your PC.
Enter the correct date and time.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Zone
Choose the Time Zone for your location from the drop-down list.
If your location is currently using Daylight Saving, enable the Adjust for daylight saving checkbox.
You must UNCHECK this checkbox when Daylight Saving finishes.
Enable or disable the Time Server feature as required.
Network Time
Protocol
If Enabled, the Network Camera will contact a Network Time Server at regular intervals and update its
internal timer.
NTP Server
Address
Enter the address for the desired NTP server.
Update
The Schedule determines how often the Network Camera contacts the NTP Server.
Select the desired options.
LED Operation
Enable this if you want to use this function.
Network Screen
This screen is displayed when the Network menu option is clicked.
Figure 25: Network Screen
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Data - Network Screen
Network
Obtain an IP
Address
If selected, the Network Camera will obtain its IP address and related information from a DHCP Server.
Only select this option if your LAN has a DHCP Server.
Automatically
Use the following IP If selected, you must assign the following data to the Network Camera.
Address
•
•
•
IP Address - Enter an unused IP address from the address range used on your LAN.
Subnet Mask - Use the same value as PCs on your LAN.
Default Gateway - Use the same value as PCs on your LAN.
Obtain DNS server
address
If selected, the Network Camera will use the DNS address or addresses provided by the DHPC server.
This option is only available if the IP address setting is Obtain an IP address Automatically.
automatically
Use the following
Primary DNS server - Use the same value as PCs on your LAN. Normally, your ISP will provide this
DNS server address address.
Secondary DNS server - This is optional. If entered, this DNS will be used if the Primary DNS does not
respond.
Secondary Port
This sets the port number for HTTP (Web) connections to the Camera, whether for administration or
viewing video.
If enabled, you can connect using either port 80 or the Secondary port. You must enter the Secondary port
number (between 1024 to 65535) in the field provided.
Note that when using a port number which is not 80, you must specify the port number in the URL. For
example, if the Camera's IP address was 192.168.1.100 and the Secondary port was 1024, you would
specify the URL for the Camera as follows:
RTP/RTSP
The RTSP (Real Time Streaming Protocol), a standard for connected client(s) to control streaming data
(MPEG-4) over the World Wide Web. Enter the RTSP Port number (between 1024 and 65535) in the field
provided. The default RTSP Port is 554.
The RTP (Real Time Transport Protocol), an Internet protocol for transmitting real-time data such as audio
and video.
Max RTP Data Packet field will let users limit the size of the file. Enter the desired value between 400 and
1400.
Multicast RTP/RTSP
Enable Multicast
Video Address
Enable the feature as required.
Enter the address of video.
Video Port
Enter the desired value (between 1024 to 65534) in the field provided. The number you entered must be
even values.
Audio Address
Audio Port
Enter the address of the audio.
Enter the desired value (between 1024 to 65534) in the field provided. The number you entered must be
even values.
Time to Live
Enter the desired length of time, if the packets fail to be delivered to their destination within. The Time to
Live you entered must be in-between 1 to 255.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Screen (Wireless Model Only)
This screen is displayed when the Wireless menu option is clicked.
Figure 26: Wireless Screen
Data - Wireless Screen
Wireless Network
WSC PIN Code
Network Type
It displays the WSC PIN code number for the camera.
This determines the type of wireless communication used by the Network Camera.
•
•
If you have an Access Point, select Infrastructure.
Otherwise, select Ad-hoc.
SSID
This must match the value used by other devices on your wireless LAN.
Note! The SSID is case sensitive.
Domain
Select your region from the drop-down list.
Channel No.
•
•
•
In Infrastructure mode, this setting is ignored. The Network Camera will use the Channel set on the
Access Point.
For Ad-hoc mode, select the Channel you wish to use on your Network Camera. Other Wireless
stations should use the same setting.
If you experience interference (shown by lost connections and/or slow data transfers) you may need to
experiment with different channels to see which one is the best.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Security
Security System
Select the desired option, and then enter the settings for the selected method:
•
•
Disabled - No security is used. Anyone using the correct SSID can connect to your network.
WEP - The 802.11b standard. Data is encrypted before transmission, but the encryption system is not
very strong.
•
WPA/WPA2 Personal - Like WEP, data is encrypted before transmission. WPA is more secure than
WEP, and should be used if possible. WPA Personal is the version of WPA which does NOT require a
Radius Server on your LAN.
WEP
Authentication Type Normally this can be left at the default value of "Automatic." If that fails, select the appropriate value -
"Open System" or "Shared Key." Check your wireless card's documentation to see what method to use.
Note: In Infrastructure mode, either setting will normally work, since most Access Points can use both
methods.
WEP Encryption
Select the WEP Encryption level:
•
•
•
•
64 Bit Keys (10 Hex chars)
128 Bit Keys (26 Hex chars)
64 Bit Keys (5 ASCII chars)
128 Bit Keys (13 ASCII chars)
Passphrase
WEP Keys
Enter a word or group of printable characters in the Passphrase box and click the "Generate Key" button to
automatically configure the WEP Key(s). If encryption strength is set to 64-bit, then each of the four key
fields will be populated with key values. If encryption strength is set to 128-bit, then only the selected
WEP key field will be given a key value.
•
•
•
•
Use the radio buttons to select the default key.
Enter the key value you wish to use. Other stations must have the same key values.
Keys must be entered in Hex. Hex characters are the digits (0 ~ 9) and the letters A ~ F.
Click Clear Keys to set the Keys to be blank.
WPA/WPA2 Personal
Shared Key
Enter the key value. Data is encrypted using a key derived from the network key. Other Wireless Stations
must use the same network key. The PSK must be from 8 to 63 characters in length.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Screen
Many Internet connections use a "Dynamic IP address", where the Internet IP address is allocated whenever the Internet connection is
established.
This means that other Internet users don't know the IP address, so can't establish a connection.
DDNS is designed to solve this problem, as follows:
•
You must register for the DDNS service with a DDNS service provider. The DDNS Service provider will allocate a Domain
Name to you upon request.
•
•
The DDNS settings on the DDNS screen above must be correct.
The Network Camera will then contact the DDNS server whenever it detects that the Internet IP address has changed, and inform
the DDNS server of the new IP address. (The Check WAN IP Address determines how often the Network Camera checks if the
Internet IP address has changed.)
This system allows other internet users to connect to you using the Domain Name allocated by the DDNS service provider.
This screen is displayed when the DDNS menu option is clicked.
Figure 27: DDNS Screen
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Data - DDNS Screen
DDNS
Enable DDNS
Enable or disable the DDNS function, as required.
Only enable this feature if you have registered for the DDNS Service with a DDNS Server provider.
Service Provider
Web Site Button
Choose a service provider from the list.
Click this button to open a new window and connect to the Web site for the selected DDNS service
provider.
Domain (Host)
Name
Enter the Domain Name (Host Name) allocated to you by the DDNS Server provider.
Account/E-Mail
Password/Key
Enter the login name for the DDNS account.
Enter the password for the DDNS account.
Check WAN IP
Address
Set the schedule for checking if the Internet IP address has changed. If the IP address has changed, the
DDNS Server will be notified.
NOTE: If the DDNS Service provided some software to perform this IP address update or notification, you
should NOT use this software. The update is performed by the camera.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Data - Video & Audion Screen
MPEG-4 Settings
Resolution
Select the desired video resolution format. The default resolution is set to 320*240.
•
•
Constant Bit Rate: Select the desired bit rate. The default is set to 1.2 Mbps.
Fixed Quality: Select the desired option. The default fix quality is set to Normal.
Video Quality
Control
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note that you can specify EITHER the
Bandwidth OR the Frame Rate, not both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default value for bandwidth is Unlimited, which allows you to specify the desired frame rate.
MJPEG Settings
Resolution
Select the desired video resolution format. The default resolution is set to 320*240.
Select the desired fix quality. The default fix quality is set to Normal.
Fixed Video
Quality
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note that you can specify EITHER the
Bandwidth OR the Frame Rate, not both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default values for bandwidth is Unlimited, which allows you to specify the desired frame rate.
Mobil Settings
Enable Mobil
Streaming
Enable streaming video for the mobile device by checking this checkbox.
The default resolution is set to 160x120.
Resolution
•
•
Constant Bit Rate: Select the desired fix bit rate.
Video Quality
Control
Fixed Quality: Select the desired option. The default fix quality is set to Normal.
Max. Frame Rate
Access Code
Select the desired Maximum bandwidth for the video stream.
Enter the code for accessing the live video from camera through cell phone connection.
Video Adjustments
Power Line
Frequency
Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under
florescent lighting.
White Balance
Brightness
Select the desired option to match the current environment and lighting.
If necessary, you can adjust the brightness to obtain a better image. For example, if the camera is facing a
bright light, the image may be too dark. In this case, you can increase the brightness.
Sharpness
Options
Select the desired option for the sharpness. You can select a Sharpness value between -3 and 3.
Microphone
Audio Type
Speaker
Enable audio by checking this checkbox. Using Audio will increase the bandwidth requirements slightly.
Select the desired audio type.
Enable speaker sound by checking this checkbox.
Time Stamp
Text Display
If enabled, the current time will be displayed on the Video image.
Enable this setting if you want text to be displayed on the Video image, and enter the desired text - up to 20
characters. This feature is often used to identify each camera when multiple cameras are installed.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Data - Video Access Screen
User Access
•
If disabled - No login required, users do not have to provide a username and password when they
connect to the camera to view video.
Enable Security
Checking
•
If enabled - Require login, users will be prompted for a username and password when they connect to
the camera to view video. The camera administrator must use the "User Database" menu option to create
the desired users.
Video Access
•
•
If enabled - Camera is available during the scheduled periods, and unavailable at other times. If this
option is selected, you need to define a schedule. If no schedule is defined, this option is always
disabled.
Enable Scheduled
Video Access
If disabled – The option will remain disabled until you enable it.
Note that regardless of which setting is chosen, the Administrator can ALWAYS access the camera and view
live video.
Access Schedule
Scheduled Periods
This displays all periods you have entered into the database. If you have not entered any periods, this list will
be empty.
Delete
Use the Delete button to delete the selected item in the list.
Add Period
Day
Choose the desired option for the period.
Enter the start time using a 24 hr clock.
Enter the end time using a 24 hr clock.
Click this button to add a new period.
Start Time
End Time
Add
38
Download from Www.Somanuals.com. All Manuals Search And Download.
User Database Screen
This screen is displayed when the User Database option on the Video & Audio menu is clicked.
Figure 30: User Database Screen
Data - User Database Screen
Existing Users
User List
This displays all users you have entered into the User database. If you have not entered any users, this list
will be empty.
Edit, Delete, Delete Use these buttons to manage the user database.
All
User Properties
User Name
Enter the name for the user here.
•
•
Spaces, punctuation, and special characters must NOT be used in the name.
The name is case insensitive (case is ignored), so you can not have 2 names which differ only by case.
User Password
Confirm Password
Add Button
The password for this user.
Re-enter the password for the user, to ensure it is correct.
Click this button to add a new user, using the data shown on screen.
Use this button to clear the input fields, ready to add a new user.
Clear Button
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Pan/Tilt Screen
This screen is displayed when the Pan/Tilt option on the Video & Audio menu is clicked.
Figure 31: Pan/Tilt Screen
Data - Pan/Tilt Screen
Pan/Tilt
Enable Pan/Tilt
Control
Enable the checkbox in order to use the Pan/Tilt function.
Preset Point
Position
Click this button to define the preset point position.
Set Patrol Sequence
Set Patrol Sequence This feature determines how the camera will move when it is set to "Rotate". You can set a number of
Preset Positions; the camera will go to the first position, then move through the list of present positions until
it is finished. The camera will stop at the last position in the list.
To create the Preset Sequence, select the desired Preset Position in the left column, and click the "Add >>"
button. Repeat until the desired sequence is complete. Note that you can add the same Preset Position more
than once; this can be used to make the camera stay longer at one position.
To delete a position from the Sequence, select the desired position and click the "Remove" button.
Time
This determines how long the camera will stay at each position while executing the sequence. Set this to the
desired value.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Preset Position Screen
This screen is displayed when the Preset Point Positions button on the Pan/Tilt screen is clicked.
Figure 32: Preset Point Position Screen
Data - Preset Point Positions
Calibration
Preset List
Preset Name
Click this button to reset the calibration of Pan/Tilt area.
Select the desired Preset. The screen will update with the current data for the selected Preset Position.
Enter a suitable name for the Preset Position.
If no name is entered, the preset will have a number only.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion Detection Screen
This screen is displayed when the Motion Detection option on the Event menu is clicked.
.
Figure 33: Motion Detection Screen
Data - Motion Detection Screen
Motion Detection
Set Detection Areas You can set the full screen or areas of the video image to be examined.
Note: Motion detection can be triggered by rapid changes in lighting condition, as well as by moving
objects. For this reason, it should only be used indoors.
Adjust the threshold of detection for each area.
Current value for Motion detection.
Threshold
Indicator
42
Download from Www.Somanuals.com. All Manuals Search And Download.
E-Mail Screen
This screen is displayed when the E-Mail option on the Event menu is clicked.
.
Figure 34: E-Mail Screen
Data - E-Mail Screen
Primary/Secondary SMTP Server
SMTP Server
Address
Enter the address of the SMTP (Simple Mail Transport Protocol) Server to be used to send E-Mail.
Authentication
Select the desired Authentication type for the SMTP Server.
SMTP Login name Enter your login name for the SMTP Server.
SMTP Password
POP server name
Show "From" as
Secondary SMTP
E-Mail Setup
Enter your password for the SMTP Server.
Enter the name for the POP Server.
Enter the E-Mail address to be shown in the "From" field when the E-Mail is received.
Check the box to upload to the Secondary SMTP if the camera can not connect to the primary SMTP.
E-Mail Address
Enter at least one (1) E-Mail address; the 2nd and 3rd addresses are optional. The E-Mail alert will be sent to
the E-Mail address or addresses specified here.
Subject
Enter the desired text to be shown as the "Subject" for the E-Mail when it is received. Subject can not exceed
48 alphanumeric characters.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP Screen
This screen is displayed when the FTP option on the Event menu is clicked.
Figure 35: FTP Screen
Data - FTP Screen
Primary/Secondary FTP
FTP Server
Port
Enter the address of the FTP Server.
Enter the Port of the FTP Server to be connected.
Enter your login name for the FTP Server.
Enter your password for the FTP Server.
Login name
Password
Enable Passive
Mode
Check the box to enable the Passive mode feature of the FTP.
File Path Name
Secondary FTP
Enter the file path/name of the FTP.
Check the box to upload to the Secondary FTP if the camera can not connect to the primary FTP.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
HTTP Screen
This screen is displayed when the HTTP option on the Event menu is clicked.
Figure 36: HTTP Screen
Data - HTTP Screen
HTTP Notification
Enable
URL
Enable this checkbox to use the HTTP Notification.
Enter the URL of your HTTP notification server.
Proxy Server
Name
Specify the proxy server name in the provided field if the camera needs to pass through a Proxy Server to do
the HTTP notification.
Port Number
Method
Enter the port number for the proxy server.
Select the desired method of form data encoding.
•
Get - It should be used if and only if the form processing is independent, which typically means a pure
query form. Generally it is advisable to do so.
•
Post - If there are problems related to long URLs and non-ASCII character repertoires, which can make
it necessary to use "POST" even for independent processing.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Event Trigger Screen
This screen is displayed when the Event Trigger option on the Event menu is clicked.
Figure 37: Event Trigger Screen
Data - Event Trigger Screen
Event Schedule
Schedule List
The Event Schedule shows all of the event types currently configured in the Network Camera, along with
various information about their configuration, as listed below:
•
•
•
•
Name - the descriptive event name set by the user.
Effective Time Frame - shows when the event at a set time will be triggered.
Trigger by - shows what kind trigger activate the event.
Action - shows what kind of the actions will be issued when the event been triggered
New Schedule
Effective Time
Frame
Choose the desired option for the period.
Start Time
End Time
Choose the desired start time using a 24 hr clock.
Choose the desired end time using a 24 hr clock.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Trigger Event
Motion Detection
If enabled, movement in a motion detection window can be used to trigger events.
Pan/Tilt
Configuration
This option is only available if your camera is fitted with a Pan/Tilt control. If available, select the desired
option to resolve conflict between the Pan/Tilt and Motion Detection features.
Interval
Actions
Select the desired option for the events interval. (* "0" = No Delay)
•
•
•
•
E-Mail - If checked, an E-Mail (with "Attachment") will be delivered to the SMTP server. (SMTP
Server must be configured on the E-Mail page.)
FTP - If checked, an FTP upload will be activated to the FTP server. (FTP servers must be configured
on the FTP page.)
HTTP - If checked, an Instant Messaging (IM) will be delivered to the Jabber server. (Jabber server
must be configured on the Instant Messaging page.)
JPEG Image:
Attachment Type
Frame Rate - Select the desired capture rate for the JPEG image(s) here.
Pre/Post Capture - Select the desired length. The snapshot(s) of the JPEG image depends on this setting,
and also the file size and degree of compression.
•
Video:
Video Format - Select the desired type for the video file. Pre/Post Capture - Select the desired length.
The size of the file depends on this setting, and also the Video size and degree of compression.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance Screen
.
Figure 38: Maintenance Screen
Data - Maintenance Screen
Administrator Login
Administrator
ID
Enter the name for the Administrator here.
Spaces, punctuation, and special characters must NOT be used in the name.
The password for the Administrator.
Administrator
Password
Verify Password Re-enter the password for the Administrator, to ensure it is correct.
Firmware Upgrade
Upgrade File
Click the "Browse" button and browse to the location on your PC where you stored the Firmware file. Select
this file.
Start
Click this button to start the Firmware. When the upgrade is finished, the Network Camera will restart, and
this management connection will be unavailable during the restart.
Clear File Name
This does NOT stop the Upgrade process if it has started. It only clears the input for the "Upgrade File" field.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Backup & Restore
Backup
Click Backup button to save the current configuration information to a text file.
Configuration
File
Restore
Click Restore button to reinitialize the camera to load the new updated software. Do this after loading the
Configuration
File
upgrade file.
Clear File Name
This does NOT stop the Restore process if it has started. It only clears the input for the "Restore Configuration
File" field.
Restore Factory
Defaults
Click Defaults button to reloads all default settings on the camera.
Restart Camera
Click Restart button to restarts the camera.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Screen
.
Figure 39: Status Screen
Data - Status Screen
System
Device Name
Description
F/W version
Network
This shows the name of the Network Camera.
This shows the description of the Network Camera, such as location.
The version of the current firmware installed.
MAC Address
IP Address
Network Mask
Gateway
The current IP address of the Network Camera.
The IP Address of the Network Camera.
The network mask associated with the IP address above.
The IP Address of the remote Gateway associated with the IP Address above.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless (Wireless Model Only)
WSC PIN Dode
Network Type
SSID
It displays the current WSC PIN code.
This shows the Network Type currently in use (Ad-hoc or Infrastructure).
This displays the wireless SSID.
Channel
This shows the wireless channel currently used.
The current security setting for Wireless connections.
This shows the strength of the signal.
Security
Signal Strength
MPEG-4/MJPEG
Resolution
Video Quality
Frame Rate
Buttons
The image size of the video stream.
This displays the image quality of the video stream.
This displays the frame rate of the video stream.
Refresh
Update the log and any other data on screen.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Log Screen
This screen displays a log of system activity.
.
Figure 40: Log Screen
Data - Log Screen
Log
System Log
This is a log of system activity.
Enable Syslog
Service
Check the box to enable the System Log Server feature.
Syslog Server
Address
Enter the address of the Syslog Server.
Refresh
Button
Click this to update the data shown on screen.
Click this button to restart the log.
Clear Log
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
6
Windows Monitor/Playback/IP Recorder
Utility
This Chapter describes how to view and record the live video stream generated by the Network Camera, using the
supplied Windows utility.
Overview
The recommended method to view video is to use the supplied Windows Viewing/Recording utility. This utility also allows you to
record the video streams, either interactively or using a schedule.
Installation
1. Insert the supplied CD-ROM into your drive. If the setup program does not start automatically, run NeutralCamera.exe in the
root folder. You will see the Welcome screen shown below.
Figure 41: Welcome Screen
2. Click the Install Utility button to start the installation of the Monitor/Playback/IP Recorder Utility.
3. Follow the prompts to complete the installation.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
System Tray Icon
When started, the program will create an icon in the Windows system tray on the taskbar, as shown below.
Figure 42: System Tray Icon
You can right click the icon and it will provides a menu which allows you to view program details, view the main screen, or terminate
the program.
Main Screen
When started, a screen like the example below will be displayed.
Figure 43: Main Screen
If no cameras have been defined, no video will be displayed. See the following section for information on defining a camera. Note that
each Camera is given a number (Channel Number).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Setup
To define a camera and associate it with a Channel Number.
1. Click the Setup button on the main screen. You will see a screen like the example below.
Figure 44: Camera Setup Screen
2. Select the desired Channel number in the left (No.) column.
3. There are 2 radio buttons, for LAN or Internet. The default is LAN. See the following section for details of the Internet option.
•
The LAN panel, on the left, displays all Network Camera found on your LAN. This list can be updated by clicking the Refresh
button.
•
The Camera Data panel, on the right, displays the data for the selected camera.
4. To associate a camera with the current Channel:
•
•
•
•
Select a camera in the list on the left.
Enter the value of Local ID.
Check that the Camera Data shown on the right is correct. See below for details.
Click the Add button. The camera will now appear in the Channel List.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Data - LAN
Local ID
This is the name you gave to this camera. This field must be entered.
This is the default name for the Network Camera, and cannot be changed.
Camera Name
IP Address
The current IP address of the Network Camera.
Port Number
This will normally display "80". Only change this if requested to do so by the Network Camera
Administrator.
Login
The camera Administrator can require that users provide a username and password before being
allowed to view the live video.
•
•
If the Administrator has not enabled this option, the Login fields can be left blank.
Otherwise, you must enter the username and password allocated to your by Administrator.
Setup Camera Pages
Enable Trigger Event
Click this button to connect the Web-based interface of the Camera
Check this if you want the Camera to have the feature enabled.
You can add the same Camera twice, once for the LAN (using
the LAN IP address), and again for the Internet (using the
Internet IP address). This will allow viewing the camera whether
you are on the same LAN as the camera or in a remote location.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Cameras on the Internet
If the Network Camera you wish to add is not on your LAN, but is available via the Internet, click the Internet button. You will see a
screen like the example below.
Figure 45: Add Camera from Internet
To associate a camera with the current Channel:
1. Enter the Camera Data on the panel on the right. See below for details.
2. If desired, click the Test button to check that a connection and login can be performed successfully. Note that if the remote LAN
does not currently have an Internet connection, or the remote camera is not on-line, the test will fail because no connection is
possible.
3. Click the Add button. The camera will now appear in the Channel List.
Camera Data - Internet
Local ID
This is the name you gave to this camera. This field must be entered.
Camera Name
This is the default name for the Network Camera, and cannot be changed.
This field will be displayed automatically once a connection to the Network Camera has been established.
Enter the Domain Name or Internet IP address of the desired Network Camera.
IP Address
Port Number
Enter the port number used by the Network Camera for connections via the Internet The Camera Administrator
can advise you of the port to use. The default value is 1024.
Login
The camera Administrator can require that users provide a username and password before being allowed to view
the live video.
•
•
If the Camera Administrator has not enabled this option, the Login fields can be left blank.
Otherwise, you must enter the username and password allocated to you by the Camera Administrator.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream Type
Select the desired video stream type. There might be either MPEG4 or Motion-JPG streaming type.
Click this button to connect the Web-based interface of the Camera
Setup Camera
Pages
Enable Trigger Check this if you want the Camera to have the feature enabled.
Event
You can add the same Camera twice, once for the LAN, and
again for the Internet. This will allow viewing the camera
whether you are on the same LAN as the camera or in a remote
location.
Main Screen
You can view live video in the main screen. The built-in software can let you view up to 9 cameras on a single computer screen at one
central location.
The Icons allow you to control the cameras and video streams.
Channel (Camera) Selection.
Use this to select the desired Channel (Camera) by clicking on the top row. This panel also indicates the status of
the camera.
•
•
•
•
The first column indicates if the camera is available.
Green indicates the camera is available.
Gray indicates that the camera is currently unavailable.
The second column indicates if a recording is in progress.
Gray indicates no recording.
Red indicates recording is in progress.
The third column indicates if Motion Detection is in progress.
Gray indicates this feature is not enabled.
Yellow indicates Motion Detection is in progress.
The forth and fifth columns indicate if I/O port 1/2 is in On or Off mode.
Gray indicates this feature is not enabled.
Yellow indicates I/O port is in On mode.
Alert Log List.
It displays the list of alert logs, if any.
Preset Position. Select the desired Preset position.
Refresh. Update the Preset position list. This has no effect unless during the viewing session, another user or the
Camera Administrator has renamed one or more of the Preset positions.
Create Preset Points. Define (or re-define) a Preset position. The Camera Administrator can choose whether or
not this option is available.
Camera Patrol. Move through the Preset positions in the sequence defined by the Camera Administrator.
Setup. Click this button to open the Setup Window.
Playback. Click this button to open the Playback, which allows you to browse through the previously saved files.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Move Control. Use this to move the camera to the desired position. There may a short delay after clicking the
desired icon. You should wait a couple of seconds rather than click again.
Channel Indicator. This indicates the current channel (camera).
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera
Stop. This will terminate the connection to the camera, halting both the viewing and the recording (if in progress).
Record. Click this to start recording the current video stream.
While recording, this button will be blue. To stop recording, click the Stop button.
Snapshot. Click this to take a single JPEG "snapshot" image of the current video.
Zoom Camera. A digital zoom feature is available. To zoom in on a section of the window, click this icon. Then
use your mouse to select the section you want to magnify. Click the icon again to disable the zoom feature.
Flip Video. Click this to have the image swapped top-to-bottom.
Mirror Video. Click this to have the image swapped left-to-right.
Direct Pan/Tilt. Use this to move the camera to the Pan/Tilt position directly.
Sound On/Off. This can be used to select the Audio stream which can be heard. (Only one audio stream can be
selected at any time.) If the camera does not support audio, or if audio is disabled on the camera, this option is
unavailable.
Microphone On/Off. For Cameras that feature audio, click this to enable the microphone.
Volume. If Sound/Microphone is enabled, you can right click the icon(s), then drag and drop to raise or lower the
volume.
Screen Layout. Use this to select the number of Channels (Cameras) to be displayed on screen. Up to 9 cameras
can be displayed.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Video
You can record Video while watching, or schedule recordings to occur when you are absent. Recordings are stored in a standard
Microsoft ASF file format, and can be played using Microsoft Media Player.
Before doing any recording, you should review the recording settings to ensure they are suitable for your PC.
Recording Schedule
To set the Recording Preferences, click the Recording Schedule tab on the Setup screen. You will see a screen like the example below.
Figure 46: Recording Schedule
If necessary, change these settings to suit your environment.
Local ID. This is the name you gave to this camera. This field must be entered.
Interval. Decide which days you want the Camera to record. Select the appropriate Interval from the drop-down list.
Start Date. Select the date you want the recording begin.
Start Time. Select the time you want the recording begin.
Duration. Select how ling you want the recording to be.
After you have made your selections, click the Add button to save the new scheduled recording, and you will see it appears in the
recording list.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferences
This screen is displayed after clicking the Preferences tab on the Setup screen. If necessary, change these settings to suit your
environment.
Figure 47: Preferences Screen
Data - Preferences
Recording Paths
Recording
This is the Drive and Folder on your PC where recorded files will be placed. You need a drive which has
large amounts (Gigabytes) of free space. Click the Browse button to select the drive and folder.
Note that file names are automatically assigned, using the date and time.
Instant Recording Time Limit
Maximum time limit
for Instant Recording
This sets the maximum size of a recording which is started by clicking the Record button on the main
screen.
If the recording is not stopped manually, it will be terminated after the time period indicated here.
Trigger Event
Record before Trigger
Event
Set the time so the Utility will start recording the certain time before the Utility detects motion in a
Camera's field of view.
Record after Trigger
Event
Set the time so the Utility will stop recording the certain time after the Utility detects motion in a
Camera's field of view.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Disk Allocation for Each Camera Recording
Total Disk Space
This displays the total size of the disk selected for storing recordings.
Available Disk Space
This displays the available space of the disk selected for storing recordings.
Enable this if you wish to limit the disk space used by video recordings.
Enable Disk space
limitation
Maximum Allowed
Space
Enter the maximum amount of disk space which can be used for video recordings.
Select the desired option for the behavior when the disk space limit is reached.
When allowed space
is full.
•
Overwrite earliest file. The utility will overwrite the old files if the space is not enough for
recording.
•
Stop Recording. If the disk space limit is reached, no further recording is done.
Initial Settings
Launch this utility
Check this to have this utility start when Windows starts.
when Windows started
Proxy Server
Enable proxy
If enabled, click the Proxy Settings button to configure the settings.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Playback
To access the saved files of the Camera, click Playback button in the Main screen, then you will see the following screen.
Figure 48: Playback Screen
Searching Recorded Video Files
Select Camera. Select the desired camera from the list.
Recording Methods. Select the type of the recorded file from the drop-down list that you wish to view.
Start Date/Time. The date and time the recording will be made.
End Date/Time. The date and time the recording will be ended.
Load other Cameras. Click this button to load other cameras from the network.
Submit. Click this button then it will display the list of files according to the search criteria.
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera
Frame by Frame. Playback the video in a frame-frame basis by clicking the mouse button.
Stop. This will terminate the connection to the camera, halting both the viewing and the recording (if in progress).
Snapshot. Click this to take a single JPEG "snapshot" image of the current video.
Zoom In. To zoom in on a section of the window, click this icon.
Zoom Out. To zoom out on a section of the window, click this icon.
Print. Click this to print the current video stream.
Playback Speed. To play a recorded file, select the desired speed.
Audio Control. To play a recorded file, select the desired volume.
Delete Video. To delete a recorded file, select the file and click this button.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
7
Troubleshooting
This chapter covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the Network Camera and some possible solutions to
them. If you follow the suggested steps and the Network Camera still does not function properly, contact your dealer for further
advice.
Problems
Problem 1:
I can't connect to the Network Camera with my Web Browser to
configure it.
Solution 1:
It is possible that your PC's IP address is not compatible with the IP
address of the Network Camera.
Use the Windows utility to configure the Network Camera with a valid IP
address.
Problem 2:
The Windows utility doesn't list any Network Cameras.
Solution 2:
Check the following:
•
•
•
The Network Camera is installed, LAN connections are OK, it is
powered ON and startup is complete.
Ensure that your PC and the Network Camera are on the same network
segment. (If you don't have a router, this must be the case.)
Ensure that your PC has the TCP/IP network protocol loaded. In
Windows, this is done by using Control Panel-Network.
•
•
•
If an entry for TCP/IP -> Network card is not listed, use Add -
Protocol - Microsoft - TCP/IP to add it.
You then need to select the new entry (TCP/IP -> Network card),
click Properties, and configure the IP Address tab.
If your LAN has a DHCP Server, you can select "Obtain an IP
Address automatically". Otherwise, you must select "Specify an
IP Address", and enter values for IP Address, Subnet Mask, and
Gateway. All devices on your LAN must use compatible values.
Remember that each device needs a unique IP Address, and the
same Subnet Mask.
Problem 3
When I try to connect to the Network Camera, I get prompted for a
user name and password.
Solution 3
You SHOULD be prompted for a user name and password if trying to
access the Administration menu.
Enter the Administrator ID and Password set on the Maintenance screen.
If you are just trying to view Video, the User Name/Password prompt
indicates that the Administrator has restricted access to specified users.
Ask the Administrator for your User Name and Password.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem 4
I can't connect to the Network Camera using a Wireless connection.
1) If a LAN cable is connected to the LAN port, the Wireless interface is
disabled. Only one interface can be active.
Solution 4
2) Check that your PC and the Network Camera have compatible Wireless
settings.
•
•
•
•
Mode (Infrastructure or Ad-hoc) must be correct.
ESSID must match.
WEP settings must match.
In Ad-hoc mode, the Channel should match, although this is often not
required.
Problem 5
Video quality may suddenly deteriorate.
This can happen when an additional viewer connects to the Network
Camera, overloading the camera or the available bandwidth. The image
size and quality can be adjusted to cater for the required number of viewers
and the available bandwidth.
Solution 5
The motion detection feature doesn't send me any E-Mails.
Problem 6
It may be that the SMTP (Simple Mail Transport Protocol) server used by
the camera to send the E-Mail will not accept mail. (This is to prevent span
being sent from the server.). Try using a different SMTP server, or contact
your ISP to see if SMTP access is being blocked.
Solution 6
Using the motion detection feature, I receive E-Mails which don't show
any moving objects.
Problem 7
The motion detection feature doesn't actually detect motion. It compares
frames to see if they are different. Major differences between frames are
assumed to be caused by moving objects.
Solution 7
But the motion detector can also be triggered by:
•
•
Sudden changes in the level of available light
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in
locations where there is good steady illumination, and the camera is
mounted securely. This feature can NOT be used if the camera is outdoors.
The image is blurry.
Problem 8
Solution 8
Try cleaning the lens, or adjusting the Video Quality Control setting on the
Video & Audio screen. Video created will the lower settings will contain
less detail; this is the trade-off for using less bandwidth.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Network Camera
Model
Network Camera
Dimensions
90mm (W) * 35mm (H) * 90mm (D)
Operating Temperature
Storage Temperature
Network Protocols
Network Interface
Wireless interface
0° C to 40° C
0° C to 40° C
TCP/IP, DHCP, SMTP, NTP, HTTP, FTP, RTP, RTSP, UPnP (Discovery/Traversal)
1 Ethernet 10/100BaseT (RJ45) LAN connection
IEEE 802.11b/802.11g compatible, Infrastructure/Ad-hoc mode, WEP/WPA Personal/WPA2 Personal
security support, roaming support
LEDs
3
Power Adapter
Lens
5V DC External
F2.0mm @F2.0 Fixed Focus lens (cell phone size) in socket type
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Approvals
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or
peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Approvals
The Network Camera and the Ethernet Network Camera meet the guidelines of the European Union and comply with the 99/5/EEC
and RTTE 99/5EG directives, including the following standards:
•
•
•
•
EN60950
EN300 328-2
EN301 489-1
EN301 489-17
This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required
to take adequate measures.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Notice
Many software components are covered by the GNU GPL (General Public License). Some are covered by other Licenses as listed in
the table below.
Details of each applicable license are contained in the following section.
No Warranty
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS '' AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Network Camera copyright information
Package source codes
License
GPL
boot loader
GPL
ARM-Linux 2.4.19
ARM-Linux-gcc 3.3.4 library
LGPL
GPL
Busy-box
cron
Public domain
(BSD & Lineo http://www.lineo.com/)
thttpd-2.25b
Public domain
(http://www.acme.com/software/thttpd/)
ntp-4.1.71
Public domain (http://www.ntp.org/)
GPL
ez-ipupdate-3.0.11b7
iptables-1.3.4
stunnel
GPL
GPL
wireless_tools.26
GPL
GPL
wpa_supplicant
dhcpd-1.3.22
GPL
DM9102 lan driver
libupnp-1.2.1
GPL
BSD
68
Download from Www.Somanuals.com. All Manuals Search And Download.
thttpd.c - tiny/turbo/throttling HTTP server
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ntp-4.1.71 license
Copyright (c) David L. Mills 1992-2001
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in
supporting documentation, and that the name University of Delaware not be used in advertising or publicity pertaining to distribution
of the software without specific, written prior permission. The University of Delaware makes no representations about the suitability
this software for any
purpose. It is provided "as is" without express or implied warranty.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Libupnp-1.2.1 License
Copyright (c) 2000 Intel Corporation. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither name of Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
cron license
Copyright (c) 1989 The Regents of the University of California. All rights reserved.
This code is derived from software contributed to Berkeley by Paul Vixie.
Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are
duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use
acknowledge that the software was developed by the University of California, Berkeley. The name of the University may not be used
to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED ''AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
GNU General Public License
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors
commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.)
You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can
get itif you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these
things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you
have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the
original, so that any problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that
any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
Terms And Conditions For Copying, Distribution And Modification
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work
based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the
Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is
included without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this
License along with the Program.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for
a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part
thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice
that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these
conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not
normally print such an announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work
based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend
to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a
volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of
physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed
only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to
copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further
72
Download from Www.Somanuals.com. All Manuals Search And Download.
restrictions on the recipients' exercise of the rights granted herein.You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you,
then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended
to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by
public license practices. Many people have made generous contributions to the wide range of software distributed through that system
in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and "any later version", you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Lesser GNU General Public License
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2,
hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the
Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about
whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the
explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure
that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or
can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you
can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these
rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave
you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide
complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified
by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's
reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot
effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any
patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser
General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We
use this license for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a
combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with
the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General
Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These
disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it
becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a
74
Download from Www.Somanuals.com. All Manuals Search And Download.
free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of
free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole
GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is
linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a
"work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter
must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or
other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License").
Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion
of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code
means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control
compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work
based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library
does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for
a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the
facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the
event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose
remains meaningful.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application.
Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the
application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work
based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend
to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a
volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library.
To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License,
version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared,
then you can specify that version instead if you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under
the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code,
which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the
source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to
copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or
linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore
falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it
contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a
derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be
linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions
(ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
(Executables containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any
executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a
work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered
by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include
the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must
do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes
were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the
Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can
modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user
76
Download from Www.Somanuals.com. All Manuals Search And Download.
who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified
definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy
of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will
operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible
with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection
6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is
normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany
the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based
on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities.
This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to
find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights
under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or
distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all
its terms and conditions for copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any
further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third
parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you,
then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended
to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by
public license practices. Many people have made generous contributions to the wide range of software distributed through that system
77
Download from Www.Somanuals.com. All Manuals Search And Download.
in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it
and "any later version", you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version
ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free
status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
B
Streaming Video/Audio Solution
Overview
Streaming video is a sequence of "moving images" that are sent in compressed form over the Internet and displayed by the viewer as
they arrive. With streaming, a Web user does not have to wait to download a large file before seeing the video or hearing the sound.
Instead, the media is sent in a continuous stream and is played as it arrives.
Streaming Video/Audio through Internet Camera
To snapshot a JPEG image from the Internet Camera with specified resolution and quality:
Size = 1 (160*120)
2 (320*240)
3 (640*480)
Quality = 1 (Very high)
2 (High)
3 (Normal)
4 (Low)
5 (Very low)
To stream M-JPEG video from the Internet Camera (M-JPEG mode only)
To stream video through the RTP/RTSP protocol from Internet Camera (MPEG-4 mode only)
rtsp://<ip>/img/media.sav
Note: Users need to specify the desired protocol in the players.
To snapshot a JPEG image (160*120, very low quality) through a mobile phone:
79
Download from Www.Somanuals.com. All Manuals Search And Download.
|