Quick Reference
SCPH-90002
SCPH-90003
Before using this product, carefully read the supplied documentation and retain it for future reference.
3-289-799-52(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not expose the console to dust, smoke or steam.
• Do not allow liquid or small particles to get into the console.
• Do not put any objects on the console.
Precautions
• Do not touch or insert foreign objects into the connectors of the console or
accessories.
• Do not allow dust or foreign matter to build up around the console vents. Remove
the dust with a low-powered vacuum cleaner.
• Set the console in a vertical or horizontal position only. When placing in the
vertical position, use the vertical stand (for PlayStation®2) (SCPH-90110 E) (sold
separately) that is compatible with this console. Also, do not change the position
while the console is turned on.
• Do not leave a disc in the console when moving or changing the position of the
console.
Safety
This product has been designed with the highest concern for safety. However, any
electrical device, if used improperly, has the potential for causing fire, electrical
shock or personal injury. To help ensure accident-free operation, follow these
guidelines:
• Observe all warnings, precautions and instructions.
• Stop use and unplug the AC power cord from the electrical outlet immediately if
the device functions in an abnormal manner or produces unusual sounds or smells.
• Never connect cables other than those specified in this manual to the network
connector.
• Contact the appropriate PlayStation® customer service helpline which can be
found within every PlayStation® and PlayStation®2 format software manual if the
device does not operate properly.
• Do not touch a disc while it is spinning.
• Do not close the disc cover in a way that could pinch your hand or fingers.
• Adjust the settings of the DVD player according to the instructions provided before
playing a DVD.
• Keep the console and accessories, including cable ties and fasteners, out of the
reach of small children.
Use and handling
• When operating the unit, play in a well-lit room and keep a safe distance from the
TV screen.
AC power cord use
• Avoid prolonged use of the console. To help prevent eye strain, take a break of
about 15 minutes during every hour of play.
• Stop using the console immediately if you experience any of the following
symptoms. If the condition persists, consult a doctor.
– Lightheadedness, nausea, or a sensation similar to motion sickness
– Tired, uncomfortable or aching hands or arms
• Do not touch the plug of the AC power cord with wet hands.
• Do not touch the console or connected accessories during an electrical storm.
• Do not touch the console for extended periods of time while the console is turned
on as extended contact may cause low-temperature burns.
• To help ensure safe operation, regularly inspect the AC power cord. If damaged,
stop use immediately and contact the appropriate PlayStation® customer service
helpline which can be found within every PlayStation® and PlayStation®2 format
software manual.
– Tired, dry or aching eyes
• Do not use the console near water.
• Do not place the console and connected accessories on the floor or in a place where
they may cause persons walking by to trip or stumble.
• Do not place the console or accessories on surfaces that are unstable, tilted or
subject to vibration.
• Do not expose the console or accessories to high temperatures, high humidity or
direct sunlight (use in an environment where temperatures range from 5°C to 35°C/
41°F to 95°F).
• Do not use a power cord other than the supplied AC power cord.
• Check that there is no dust or lint on the mains power plug before inserting into an
electrical outlet. If the plug becomes dirty, wipe it off with a dry cloth before
connecting.
• Do not allow dust or foreign matter to build up around the connectors on the
console. Before connecting or plugging in cords or cables, also check that there is
no dust or foreign matter on the connectors of the cords or cables, or in or on the
socket of the wall outlet. Dust or other matter on the connectors can result in fire
• Do not place the console in locations of poor ventilation such as small, enclosed
areas, directly against a wall or on a thick carpet or bedding.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
or electrical shock.
• Store discs in their cases when not in use.
• Unplug the AC power cord from the electrical outlet before cleaning or moving the
console, or when you do not intend to use the console for an extended period of
time. When disconnecting, grasp the power cord by the plug and pull straight out
of the electrical socket. Never pull by the cord and do not pull out at an angle.
• Do not connect the AC power cord to a voltage transformer or inverter.
• Clean discs using a soft cloth, lightly wiping from the centre outwards.
Do not use solvents such as benzine, commercially available cleaners not intended
for CDs or anti-static spray intended for vinyl LPs.
• Do not use irregularly shaped discs (for example, heart- or star-shaped discs) or
damaged, reshaped or repaired discs.
When using software that supports the vibration function of
Never disassemble the console or supplied accessories
Use the PlayStation®2 console and accessories according to the instructions in the
product documentation. No authorization for the analysis or modification of the
console, or the analysis and use of its circuit configurations, is provided. There are
no user serviceable components inside the PlayStation®2 console. Disassembling the
console will void the warranty. Additionally, there is a risk of exposure to laser
radiation as well as to electrical shock hazards.
the analog controller (DUALSHOCK®2)
Do not use the vibration function if you have any ailment or injury to the bones, joints
or muscles of your hands or arms. In most cases, the vibration function can be set to
"Off" in the options menu of the software.
Network (except Local Area Networks)
• A broadband Internet connection is required to connect to a network.
• When you connect your PlayStation®2 console to a network, the Internet service
provider may charge additional usage fees. In some cases, usage charges may be
more than anticipated. For details, refer to the information provided in your service
contract or contact your Internet service provider.
When connecting the console to a plasma or projection* TV
Do not leave a still image on the TV screen for an extended period of time, as this
may leave a faint image permanently on the screen.
* Except LCD screen types
• Parents are encouraged to monitor children in online gaming to ensure safe and
responsible Internet usage.
Note on safety when playing DVDs or CDs
If you set the volume too high, it may harm your hearing or damage the speakers.
Exercise care when setting the volume.
Connecting with an Ethernet cable
Do not connect Ethernet cables or telephone cords of the following types to the
network connector:
Moisture condensation
If the console or disc is brought directly from a cold location to a warm one, moisture
may condense on the lens inside the console or on the disc. Should this occur, the
console may not operate properly. In this case, remove the disc and turn off and
unplug the console. Do not put the disc back in until the moisture evaporates (this
may take several hours). If the console still does not operate properly, contact the
appropriate PlayStation® customer service helpline which can be found within every
PlayStation® and PlayStation®2 format software manual.
• Ethernet cables not appropriate for use with a 10Base-T/100Base-TX network
• Standard residential telephone lines
• Any ISDN (digital) compatible phone or data line
• PBX phone lines
• Other "unknown" types of telephone lines
Disc handling
• Do not touch the disc surface when handling a disc; hold it by the edges.
• Do not stick paper or tape onto discs and do not write on discs.
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce
sound quality. Always handle carefully and make sure discs are clean before use.
• Do not leave discs near a heat source, in direct sunlight or in high humidity.
Cleaning
• For safety reasons, before cleaning the console or connected accessories, 1) turn
off the console, 2) disconnect the mains power plug for the console from the
electrical outlet, and 3) disconnect the Ethernet cable from the console.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• When cleaning the console, use a soft, dry cloth. Do not use solvents or other
chemicals or a chemically-treated dust cloth to clean the product.
• Do not touch the lens located inside the disc cover. To help protect the lens from
dust, keep the disc cover closed except when inserting or removing discs.
Exterior protection
To help prevent damage to the painted parts, follow the precautions below:
• Do not spill liquids such as alcohol, solvents or other chemicals on the product.
• Do not place any rubber or vinyl materials on the console exterior for an extended
period of time.
NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM
Where you see either symbol on any of our electrical products, batteries or
packaging, it indicates that the relevant electrical product or battery should not be
disposed of as general household waste in Europe. To ensure the correct waste
treatment of the product and battery, please dispose of them in accordance with any
applicable local laws or requirements for disposal of electrical equipment/batteries.
In so doing, you will help to conserve natural resources and improve standards of
environmental protection in treatment and disposal of electrical waste.
Differences to previous PlayStation®2 models
This version of the PlayStation®2 console may be different from previous models
in compatibility with optional accessories and the method of operating game
This product contains a battery which is permanently built-in for safety, performance
or data integrity reasons. The battery should not need to be replaced during the
lifetime of the product and should only be removed by skilled service personnel. To
ensure the correct waste treatment of the battery, please dispose of this product as
electrical waste.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
About the PlayStation®2 console documentation
Checking the package contents
The PlayStation®2 console documentation includes the following:
Check that you have all of the following items. If any items are missing, contact the
appropriate PlayStation® customer service helpline which can be found within every
PlayStation® and PlayStation®2 format software manual.
• Quick Reference (this document)
This document contains information on setting up and performing basic operations
on the console, as well as safety and troubleshooting information.
• PlayStation®2 console
• Analog controller (DUALSHOCK®2)
• AV cable
• AC power cord
• Euro-AV connector plug (supplied with SCPH-90003) ...1
• Printed materials
...1
...1
...1
...1
• User's Guide
This document (in PDF format) is accessed from a PC through the Internet and
contains information on performing advanced operations on the console, technical
specifications and other information.
United Kingdom: uk.playstation.com/manuals
Australia: au.playstation.com/manuals
New Zealand: nz.playstation.com/manuals
For up-to-date information regarding the PlayStation®2 console, visit
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the PlayStation®2 console
1
Warning
• Do not plug the AC power cord for the console into an electrical outlet until you have made all other connections.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Before setting up
• Do not place the console in locations subject to excessive cigarette smoke or dust. Cigarette smoke residue or dust build-up on the internal components, such as the lens, may
cause the console to malfunction.
• Make sure the TV is turned off before connecting the PlayStation®2 console.
MEMORY CARD
MEMORY CARD
2
4
1
?/1 (on/standby) indicator
Audio and video
inputs of the TV
AC power cord
AV cable
Yellow
3
To the electrical outlet*
VIDEO
Analog controller
(DUALSHOCK®2)
5
White
Red
L
When the power cord is plugged into an
electrical outlet, the ?/1 indicator will turn red to
indicate that the console is in standby mode.
* For some regions, the plug for the electrical
outlet will differ from the one illustrated.
AUDIO
R
When using a cable other than the supplied AV cable, see "When using a cable other than the supplied AV cable" (
page 14).
Hint
You can connect various USB devices to the PlayStation®2 console, but not all are compatible. Refer to the instructions supplied with the USB device for more information.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the Euro-AV connector plug (SCPH-90003)
Connect your PlayStation®2 console to the Euro-AV connector (SCART) on the TV using the Euro-AV connector plug and AV cable, making sure you match the colour-coded
plugs of the AV cable to the matching jacks of the connector plug.
TV
To AV MULTI OUT connector
Euro-AV connector plug
To Euro-AV connector
AV cable
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the console on and off
2
TV
?/1 indicator
1
Turn on the TV and select
the appropriate input.
MEMORY CARD
MEMORY CARD
2
Press the ?/1 (on/standby)/RESET button.
The ?/1 indicator will turn green. The TV will
then display output from the console.
Turning off the console
Press and hold the ?/1/RESET button for at least one second. The ?/1 indicator will turn red to indicate that the console is in standby mode.
Hint
In standby mode, power to the console is not completely turned off. If you will not be using the console for an extended period of time, unplug the power cord from the outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing content
3
You can play games, DVD-Videos and audio CDs on the PlayStation®2 console.
Insert the disc to start playback.
Place the disc in the console
with the label side facing up.
Gently press down on the middle
of the disc cover to close it.
2
3
ANALOG mode button
MEMORY CARD
MEMORY CARD
?/1 (on/standby)/RESET button
1
Press the A (open) button to
open the cover.
Mode indicator
For instructions on playing a game, see "Playing a game" (
For DVDs, see "Watching a DVD" (
For audio CDs, refer to the User’s Guide (
page 12).
page 6).
Outputting Dolby Digital or DTS audio
Connect a digital audio device to the PlayStation®2 console using a commercially available optical digital cable (for audio).
• To output audio from DVD-Videos: From the control panel ( page 12), set "Dolby Digital" or "DTS" to "On" under (Setup) t "Audio Setup" t "Audio Digital Out".
• To output audio from games: The setup method varies depending on the game. For details, refer to the instructions supplied with the game.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using memory cards
Playing a game
You can save and load game data using a memory card (sold separately). You can
also delete game data or copy game data from one memory card to another.
You can play PlayStation®2 and PlayStation® format software on the PlayStation®2
console.
Memory card types
There are two types of memory cards. Select a memory card suitable for the software
in use.
Starting a game
Insert the disc to start playback.
Memory card type
Compatible software
Amount of memory
Memory card (8MB)
(for PlayStation®2)
(SCPH-10020 E)
Resetting a game
Press the ?/1/RESET button. Be careful not to accidentally press the ?/1/RESET
button while playing a game, as doing so will cause the game to reset.
PlayStation®2 format software
Approx. 8 MB
Memory card
(SCPH-1020 E)*
* This product is no
longer manufactured.
15 memory blocks
(approx. 120 KB)
PlayStation® format software
Ending a game
After saving game data, turn the console off, and then remove the disc.
MagicGate™ is a term of copyright-protection technology developed by Sony
Corporation.
Using the analog controller (DUALSHOCK®2)
Inserting a memory card
The analog controller (DUALSHOCK®2) is equipped with pressure-sensitive
buttons and sticks. This enables you to control game action with enhanced precision
based on the force with which buttons are pressed or the angle at which the analog
stick is tilted. It is also a force feedback controller with a vibration function.
Insert the memory card into a memory card slot. Some games designate a specific
memory card slot to use.
Memory card slots
Switching modes
Depending on the game, you may need to set the controller to either digital or analog
mode. Press the ANALOG mode button of the controller to switch to the analog
mode (indicator: red). To return to digital mode, press the ANALOG mode button
again. Some games make this adjustment automatically.
MEMORY CARD
MEMORCARD
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying or deleting saved data
You can delete saved data or copy data to another memory card.
Watching a DVD
Use directional buttons and the
button to select items.
You can play DVDs on the PlayStation®2 console.
1
2
3
With no disc inserted in the console, turn on the console, and
then insert a memory card.
Starting a DVD
Select "Browser", and then select the memory card you want to
copy or delete data from.
Insert the disc to start DVD playback.
Select the icon for the data item, and then select "Copy" or
"Delete".
Follow the on-screen instructions to complete the operation.
Operating the DVD player
Press the SELECT button.
Select an icon.
Playing online games
You can play online games by connecting the PlayStation®2 console to a network.
The control panel
is displayed on
the screen.
Items you will need
• A network compatible PlayStation®2 game
• Broadband Internet service
SELECT
button
• A commercially available Ethernet cable
• A memory card (8MB) (for PlayStation®2) (sold separately)
Control panel items
You can select the following options in the control panel.
Icon
Function
Creating a network configuration
When playing online games, insert a commercially available Ethernet cable into the
network connector, and then create a network configuration. Refer to the instructions
supplied with the online game for creating a network configuration.
Menu
Displays the DVD-Video menu
Top Menu
Return
Displays the DVD-Video menu
NETWORK connector
Returns to the previously selected screen within the
DVD's menu
O
Displays and changes audio options on DVDs with
multiple audio tracks
Audio Options
Angle Options
Displays and changes viewing angles on DVDs
recorded with multi-angle options
Commercially available
Ethernet cable
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Icon
Function
Icon
Function
Displays and changes subtitle options on DVDs
with subtitle options
For DVD-RW discs (VR mode), selects Original or
Play List content to play
Subtitle Options
Go To
Original/Play List
Clear
Skips to the selected title, chapter or the specified
time, and starts playback
Clears selected numbers or playback modes
Displays and changes options for language, picture
quality, Parental Control level, audio, etc.
Setup
Hints
• For more details on control panel items, refer to the User’s Guide (
• The DVD player can be operated using the DVD remote control (for
PlayStation®2) (sold separately).
• Some control panel options cannot be selected during resume play. To select these
options, cancel resume play by selecting x (Stop) on the control panel and then
selecting x (Stop) again after playback is stopped.
page 6).
Displays the current title or chapter number, the
elapsed time, etc.
Time Display
Help
Displays the direct button functions of the analog
controller (DUALSHOCK®2)
Used to enter the number of a chapter you want to
play
Go to Chapter
Previous/Next
Search
0~9
Returns/skips to the beginning of the current,
previous or next chapter
/
. >
/
/
Fast reverses/forwards playback
Changes to playback/reverse playback in slow-
motion
Slow
Play
Starts playback
Pauses playback
N
X
Pause
Stops playback. Selecting x (Stop) again after
playback is stopped clears resume play (playback
from the last stopping point).
Stop
x
Specifies a scene for playback, and starts playback
of the scene that has been set
A-B Repeat
Shuffle Play
Program Play
Repeat Play
Begins playback of titles or chapters in a random
order
Begins playback of titles or chapters in a
programmed sequence
Selects repeated playback of all the titles on the
disc, or one title or one chapter
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control settings
When using a cable other than the supplied AV
cable
Setting parental control restrictions
Picture quality varies depending on the type of cable used. Use the information
below to determine the best connection method. If you use a cable other than the
supplied AV cable, refer to the instructions supplied with the cable.
From the control panel, select
(Setup) t "Custom Setup" t "Parental
Control".
Follow the on-screen instructions to register or enter the password. After the
password is registered or entered, proceed through the various screens to select a
region and parental control level.
TV
Cable type
A TV with component video input connectors Component AV cable (SCPH-10490)
A TV with Euro-AV (SCART) connector
A TV with S VIDEO inputs
Euro-AV Cable (SCPH-10142)
(for SCPH-90003)
Hints
S VIDEO cable (SCPH-10480)
• If you select "Other" in the region options, refer to the User's Guide (
for a list of region codes.
page 6)
• For the parental control level, note that the lower the value, the stricter the
restriction.
Picture quality scale
High quality
• To clear the parental control setting, set the option to "Off".
• To change your password, select "Change Password" from the parental control
options and follow the on-screen instructions to complete the operation.
x AV cable (supplied)
x S VIDEO cable
x Component AV cable
Temporary override of parental control restrictions
This scale is intended only as a reference. Depending on the product or condition of
your TV, the picture quality may be different.
When using the Euro-AV Cable, picture quality may vary depending on your TV's AV
connection. For optimum picture quality, connect your Euro-AV cable to an RGB-
compatible socket on your TV. Refer to the instructions supplied with your TV for
details.
Start DVD playback. When prompted by the system, select "Yes", and then enter the
password.
Hints
• You cannot change the parental control setting without a password.
• When DVD playback is stopped, the parental control level will return to its default
setting.
• If you forget your password, see "Troubleshooting" (
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes
Compatible software
Some discs are assigned "region codes" for each geographic sales region. This
console can play discs with the following region codes.
Disc
Region code
DVD
PlayStation®2 format DVD-ROM
DVD-ROM (DVD-Video)
(SCPH-90002 only)
4
DVD+R / DVD+RW
DVD-R / DVD-RW (Video mode / VR mode)
PlayStation®2 format CD-ROM
PlayStation® format CD-ROM
CD-DA (Audio CD)
DVD
(SCPH-90003 only)
2
CD
ALL
PlayStation®2 format DVD-ROM
PlayStation®2 format CD-ROM
PlayStation® format CD-ROM
Notes
• Some discs may not be playable due to scratches, dust or recording problems.
• Throughout this manual, the term "DVD-Video" is used to refer to DVD-R, DVD-
RW (Video mode), DVD+R and DVD+RW discs.
DVD-Videos
This console can only play discs recorded for the PAL broadcast standard.
• The audio CD playback feature of this product is designed to conform to the
Compact Disc (CD) standard. Recently, some record companies have started
marketing music discs encoded with copyright protection technologies. Some of
these music discs do not conform to the CD standard and may not be playable on
this product.
• A DualDisc is a two sided disc product that contains DVD recorded material on
one side and digital audio material on the other side. However, since the audio
material side does not conform to the Compact Disc (CD) standard, playback on
this product is not guaranteed.
DVD-R, DVD-RW, DVD+R and DVD+RW discs
• Only discs that have been finalized can be played.
• Copy-protected video from a digital broadcast recorded on Content Protection for
Recordable Media (CPRM) compatible DVD-RW discs or on CPRM compatible
DVD-R discs cannot be played on this console.
• Do not play illegally copied discs. This may cause a malfunction or damage to the
console.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
When purchasing optional accessories, be sure to purchase those that are compatible
with this model of the PlayStation®2 console.
About the DVD remote control (for PlayStation®2)
When purchasing a new DVD remote control, choose model number
SCPH-10420 E which does not include the IR receiver unit (for PlayStation®2).
About multitaps
Only the multitap (for PlayStation®2) (SCPH-70120 E) (sold separately) can be used
with this console. Do not connect multitap products with other model numbers to the
console as this may result in damage to the console.
Accessories not compatible with this model
The following accessories for the PlayStation® console and the PlayStation®2
console are not compatible with this model of the PlayStation®2 console.
Model number
SCPH-10350 E
SCPH-10090 E
SCPH-1070 E
SCPH-10040 E
SCPH-70110 E
SCPH-10110 E
-
Product name
Network Adaptor (Ethernet) (for PlayStation®2)
Multitap (for PlayStation®2)
Multitap
Vertical stand (for PlayStation®2)
Vertical stand (for PlayStation®2)
Horizontal stand (for PlayStation®2)
Products that use the
S400 i.LINK connector
16
Download from Www.Somanuals.com. All Manuals Search And Download.
with a DVD inserted, press the ?/1/RESET button and immediately press and
*2
hold down the START button of the controller . The "Progressive" setting will
Troubleshooting
be cleared and video from the DVD will be displayed properly.
1
2
*
*
The component AV cable (sold separately) is compatible with progressive scan.
Connect the controller to controller port 1.
Go through this section if you experience difficulty in operating the PlayStation®2
console. Should any problem persist, call the PlayStation® service line at the number
listed on your guarantee card for assistance.
The size of the video image and the TV screen do not match.
, If the console is connected to a widescreen TV (16:9), check the settings on the
TV as they may override those for the console. Refer to the instructions supplied
with your TV for details.
Check the following items first:
• Check that the console is turned on. Press the ?/1 RESET button to turn on the
console (the ?/1 indicator will turn green).
• Check that the AC power cord is fully inserted into the electrical outlet.
• Check that the cables are correctly and securely connected.
, Adjust the image size of the DVD to match your TV screen. Start a DVD, and
then stop playback. Adjust the "TV Type" setting under
Setup" in the control panel.
(Setup) t "Screen
, With some DVDs, image size cannot be changed.
, Check that the console is directly connected to the video input connector of the
TV. If there is a selector or receiver (AV amplifier) connected between the
console and the TV, the image size cannot be changed.
Picture
There is no picture on the TV screen.
, Switch the input mode of the TV as appropriate for the input connector in use on
the console.
, With some TVs, image size cannot be changed.
Sound
, There may be a problem with the cable. Try using another cable that is
compatible with the PlayStation®2 console.
There is no sound.
The picture is unstable.
, Set "Component Video Out" to "Y Cb/Pb Cr/Pr" in the System Configuration
, Check that the TV volume is not set to "mute" and adjust the TV volume to an
appropriate level.
*
menu when connecting the console to the component AV inputs on a TV . Use
the supplied AV cable to make the setting, and then connect to the TV using the
component AV cable (sold separately).
* When connecting the console to a TV that only supports RGB input, set "Component Video
Out" to "RGB".
, If the console is connected to an audio device, check the settings on the
connected device. Refer to the instructions supplied with the device for details.
, There may be a problem with the cable in use. Try using another cable that is
compatible with the PlayStation®2 console.
, Some PlayStation®2 format software titles do not support audio output from the
DIGITAL OUT (OPTICAL) connector. When playing such software, no sound
will be produced even if you connect using an optical digital cable for audio.
Connect the console to the audio device using an analog AV cable, such as the
supplied AV cable.
, When the console is connected to a VCR or a DVD recorder, copy protection
used by some DVDs may cause the picture to become unstable, or the picture
may get brighter or darker. If this happens, connect the console directly to the
TV.
*1
, If the console is connected to a TV or cable that does not support progressive
scan (480p), no video will be displayed when "Progressive" is set to "On" under
(Setup) t "Screen Setup" in the DVD player’s control panel. In this case,
17
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound or the sound quality from the digital audio device is
poor.
, If the console is connected to a digital audio device you must adjust the "Digital
Out (Optical)" setting. Turn on the console with no disc inserted, and in the
System Configuration menu set "Digital Out (Optical)" to "On".
The controller does not function correctly.
, If a software title is compatible only with the analog controller
(DUALSHOCK®2), it will not work properly with the analog controller
(DUALSHOCK®). Use a controller that is appropriate for the software title.
Refer to the instructions supplied with the software for details.
, Some software specifies a specific controller port that must be used. Check that
the controller is connected to the correct port. Refer to the instructions supplied
with the software for details.
, When playing DTS audio, set "DTS" to "On" in
(Setup) t "Audio Setup"
t "Audio Digital Out". If the connected device does not have a built-in DTS
decoder, DTS audio cannot be played.
, There may be a problem with the controller in use.
Try using another controller that is compatible with the PlayStation®2 console.
The surround effect is not produced when playing a DVD with a Dolby
Digital audio track.
, Check that the console is connected to an audio device with a built-in Dolby
Digital decoder using an optical digital cable.
The response to button operations is slow.
, The response speed of some LCD TVs and PC displays is slow. This is not a
malfunction.
, To play Dolby Digital audio, set "Dolby Digital" to "On" in
(Setup) t
"Audio Setup" t "Audio Digital Out" in the DVD player control panel.
The left and right analog sticks of the controller do not operate
properly.
, When these symptoms occur, rotate the left and right analog sticks of the analog
controller (DUALSHOCK®2) in a large circle to adjust the sticks to an optimal
range of operation. Be sure to rotate in a circle, not twist the sticks.
Operation
A disc cannot be played.
, Check that the disc is of a type that can be played on the console.
, Check that the disc is clean and in good condition. If the disc is dirty, wipe it
gently with a soft cloth.
The console does not recognize the memory card. Data cannot be
saved or copied to the memory card.
, Some PlayStation® format software may not perform properly on this console.
, If the disc has a label, place the disc in the console with the label side facing up.
, If a DVD-R or DVD-RW disc is not finalized, it cannot be played.
, Copy-protected video from a digital broadcast recorded on Content Protection
for Recordable Media (CPRM) compatible DVD-RW discs or on CPRM
compatible DVD-R discs cannot be played on this console.
, Check that the memory card is compatible with the software in use. To save or
load PlayStation®2 format software, use a memory card (8MB) (for
PlayStation®2) (SCPH-10020 E). To save or load PlayStation® format software,
use a memory card (SCPH-1020 E).
, You cannot copy saved data from PlayStation®2 format software to a memory
card (SCPH-1020 E).
, Check that the memory card is securely inserted into the console.
, There may be a problem with the memory card in use. If you have another
memory card that is compatible with the PlayStation®2 console, try switching
memory cards.
, Check that the region code of the DVD is correct for the console in use. Also
check that the broadcast standard is correct.
, The parental control feature may be set on the disc. Follow the on-screen
instructions and temporarily raise the parental control restriction level.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
settings on the disc, some functions may not be available even if you follow the
procedures in this document and the User’s Guide ( page 6).
Data saved on a memory card is corrupted.
, While saving, loading, copying or deleting data, do not attempt any of the
following. Doing so may cause the data to become corrupted.
• Do not remove the memory card or the controller.
• Do not open the disc cover.
, Some settings cannot be changed during playback or resume play. Select
x (Stop) in the control panel to stop playback, and then select x (Stop) again to
clear resume play.
• Do not reset the console.
• Do not turn off the console.
Network
The console does not function properly.
A connection to the network cannot be established.
, Static electricity and other similar occurrences may affect the console's
operation. Turn off the console and unplug it from the electrical outlet. Then plug
in the console and turn it on.
, Check that the network settings are correct. Refer to the information from your
broadband Internet service provider and the instructions supplied with the
software in use and adjust the settings accordingly.
, Check that the Ethernet cable is properly connected.
The ?/1 indicator flashes in red and the console does not work.
, Do not use the console until the flashing stops. Placing the console in an
extremely hot location or blocking the console's vents raises the internal
temperature of the console, thereby preventing proper operation.
, Check that you are using the correct type of Ethernet cable (cross cable or straight
cable). Refer to the instructions supplied with the network device for details.
, Check that the network device is properly connected. Also check that the settings
of the network device in use are correct. Refer to the instructions supplied with
the network device for details.
You forgot your password.
, You can clear the password using the following procedure:
1 Insert a DVD without the parental control feature.
2 In the control panel, select x (Stop) to stop playback, and then
select x (Stop) again to clear resume play.
3 In the control panel, select
(Setup) t "Custom Setup" t
"Parental Control" and then press the
button.
The screen to enter a password is displayed.
4 Press the SELECT button on the controller, and then enter the
number "7444" on the screen that is displayed.
The registered password is cleared, and the screen for registering a new
password is displayed. Enter a new password.
The DVD does not function. Some DVD settings cannot be changed.
, The playback status or settings of some DVDs are preset intentionally by the
manufacturer. Because the PlayStation®2 console plays DVDs according to the
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ii. when the original sales receipt or invoice or other proof of purchase
(indicating the date of purchase and retailer's name) is presented together with
the faulty Product (and has not been altered or defaced since the date of
original purchase); and
Guarantee
Thank you for buying this Product. The term "Product" means the PlayStation®2
computer entertainment system together with the accessories and/or peripherals with
which it is packaged. This Guarantee does not cover any software whether or not
packaged with the Product.
iii. when the Guarantee seal and the serial number on the Product have not been
damaged, altered or removed.
3. You may not claim under this Guarantee when the Product is damaged as a result
of:
Sony Computer Entertainment Europe Ltd ("SCEE") guarantees that this Product is
free from defects in material and workmanship that result in Product failure during
normal usage in accordance with the terms set out in below and will, for a period of
1 (one) year from the date of original purchase, repair or (at SCEE's option) replace
any component part of this Product, free of charge, where it is faulty due to defective
materials or workmanship. Replacement will be with a new or refurbished
component or unit, at SCEE's option, which is guaranteed for the remainder of the
original Guarantee Period.
i. commercial use, accident, fair wear and tear, negligence, abuse, or misuse
(including, without limitation, failure to use this Product for its normal
purpose and/or in accordance with instructions on proper use and
maintenance, or installation or use in a manner inconsistent with applicable
local technical or safety standards);
ii. use in conjunction with any unauthorised peripheral (including, without
limitation, game enhancement devices, adaptors and power supply devices);
iii. any adaptation or adjustment to, or alteration of, the Product carried out for
any reason, and whether properly carried out or not;
The benefits conferred by this Guarantee are in addition to the statutory rights and
remedies the consumer has in the UK and Eire in respect of this Product and this
Guarantee does not affect such rights and remedies in any way. The benefits
conferred by this Guarantee are also in addition to other rights and remedies which
the consumer has in law in Australia and New Zealand in respect of this Product,
including rights and remedies available under the Trade Practices Act 1974 and State
and Territory legislation in Australia and the Fair Trading Act 1986 in New Zealand
and this Guarantee does not affect such rights and remedies in any way.
iv. maintenance or repairs carried out other than by a SCEE authorised service
facility; or
v. use in conjunction with unauthorised software, virus infection, or fire, flood
or other natural calamity.
4. To the extent permitted by applicable law, this Guarantee will be your sole and
exclusive remedy in relation to defects in this Product and all other guarantees,
warranties, terms and conditions, express or implied by statute or otherwise, in
respect of this Product are excluded and neither SCEE nor any other Sony entity,
or their suppliers or authorised service facilities, will be liable for any special,
incidental, indirect or consequential loss or damage.
This Guarantee is given to you by Sony Computer Entertainment Europe Ltd of 10
Great Marlborough Street, London, W1F 7LP, United Kingdom.
IMPORTANT
1. If you need to claim under this Guarantee, please call your local Customer Service
helpline (listed in a PlayStation® and PlayStation®2 format software manuals) for
return instructions and other guidance.
If this Product needs any repair which is not covered by this Guarantee, please call
your local Customer Service helpline for advice. If your home country is not one of
those listed, please contact your retailer.
2. This Guarantee is only valid:
i. in the United Kingdom, Eire, Australia and New Zealand; and
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyrights and trademarks
About copy protection
"
", "PlayStation", "
", "DUALSHOCK" and "
" are
Attempted copying of DVDs played on this device may be prevented or restricted by
copy protection technology contained on the DVD. Attempted recording or copying
of DVDs for private use by the removal or circumvention of copy protection
technology may be prohibited under applicable law.
registered trademarks of Sony Computer Entertainment Inc.
"SONY" and " " are registered trademarks and "MagicGate" is a trademark of
Sony Corporation.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
This product is manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights
reserved.
"DTS" and "DTS Digital Out" are trademarks of DTS, Inc.
i.LINK and i.LINK logo " " are trademarks.
Sony Computer Entertainment Inc. uses DNAS (Dynamic Network Authentication
System), a proprietary authentication system, to help protect copyright and security
in connecting the PlayStation®2 console to a network. DNAS may retrieve
information about a user's hardware and software for authentication, copy protection,
account blocking, system, rules, or game management and other purposes. The
information collected does not identify the user personally. The unauthorised
transfer, exhibition, export, import or transmission of programs and devices
circumventing its authentication scheme may be prohibited by law.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
-
2
8
9
-
7
9
9
-
5
2
© 2007 Sony Computer Entertainment Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
|