4-233-529-12 (1)
Compact Hi-Fi
Stereo System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No.
Serial No.
LBT-XG700
LBT-XG500
LBT-XG80
LBT-XG60
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Parts Identification
Sound Adjustment
Adjusting the sound ............................. 18
Selecting the audio emphasis effect .... 18
Selecting the surround effect ............... 18
Main unit ............................................... 4
Remote control ...................................... 5
Making a personal audio emphasis file
–– Personal File ............................. 19
Getting Started
Hooking up the system .......................... 6
Inserting two size AA (R6) batteries into
the remote ........................................ 8
Setting the time...................................... 8
Other features
Changing the spectrum analyzer
display ........................................... 20
Saving the power in standby mode........ 8
Singing along: Karaoke ....................... 20
Playing a guitar .................................... 21
Enhancing video game sound
CD
Loading the CD ..................................... 9
— Game Sync ............................... 21
Playing the CD
Falling asleep to music
–– Normal Play/Shuffle Play/
— Sleep Timer .............................. 21
Repeat Play ...................................... 9
Playing CDs without interruption
Waking up to music
— Daily Timer .............................. 22
–– Non-Stop Play .......................... 10
Programming the CD tracks
Hooking up the optional
components
–– Program Play ............................ 10
DJ Effects ............................................ 11
Using the CD display .......................... 11
Connecting MD deck/VCR/camcorder/
video game .................................... 23
Connecting a turntable/mixer .............. 24
Tuner
Presetting radio stations....................... 12
Listening to the radio
Additional Information
Precautions .......................................... 25
Troubleshooting................................... 26
Specifications ...................................... 28
–– Preset Tuning ........................... 13
Using the Radio Data System (RDS)* . 13
Tape
* For European models only
Loading a tape ..................................... 15
Playing a tape ...................................... 15
Recording to a tape
–– CD Synchro Recording/
High Speed Dubbing/Recording
Manually/Program Edit ................. 16
Timer-recording radio programs ......... 17
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
Main unit
1
234 5 6 789
q;
qa
ra
r;
el
qs
qd
ek
ej
eh
qf
qg
qh
eg
ef
ed
qj
qk
es
ea
e;
wl wk wj wh wg wf wd wswaw;ql
A EJECT Z/Z B EJECT wg (15)
AUDIO L w; (23)
AUDIO R ql (23)
CD SYNC qg (16,17)
DIRECT EQUALIZER 5 (18)
SALSA
REGGAE
SAMBA
TANGO
MOVIE
FLAT qd (18)
SPECTRUM ANALYZER 4 (20)
FUNCTIONq; (7,9,10,16,17,23,24) STEREO/MONO ws (13)
GAME qa (21)
GROOVE r; (18)
GUITAR DISTORTION wh (21)
GUITAR jack es (21)
GUITAR LEVEL eg (21)
H SPEED DUB qg (16)
Jog dial (AMS./>) qj
(9,10,11,17)
SUPER WOOFER el (18)
SUPER WOOFER MODE ek (18)
SURROUND ra(16,18)
TIMER SELECT 8 (17, 22)
TUNER/BAND wd(12,13,16)
TUNER MEMORY wh (12)
TUNING MODE ws (12,13)
VIDEO wa (23)
LOOP ea (7,11)
GUITAR
VOLUME control qs (9,13)
MIC LEVEL ef (20)
MIX GUITAR/KARAOKE ej (20,21)
MIX MIC jack ed (20)
NON STOP wk (10)
ROCK
JAZZ
DANCE
GAME
BUTTON DESCRIPTIONS
@/1 1
P.FILE qd (18,19)
PHONES jack qh
DIRECTION eh (15,16,17)
DISC SKIP qk (9,10,17)
DISC 1~5 wj (9)
DISPLAY 3 (8,11,13)
DOLBY NR eh (15,16)
EDIT wl (17)
ENTER wh (12,14)
ENTER/NEXT qd (8,17,19,22,27)
FLASH e; (11)
c/CLOCK SET 6
v/V/b/B 9
z REC qf
PLAY MODE qk (9,10,17)
POWER SAVE/DEMO
(STANDBY) 2 (8)
PTY ws (14) *European model only
PUSH OPEN wf (9)
X qf
m /M, AMS./> qfeh
h,H qfeh
x qfqkeh
m /M qk
HX qk
REPEAT qk (9)
SLEEP 7 (21)
4
+/– wd
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
1
2 3
ws
wa
w;
ql
qk
qj
qh
4
5
6
7
8
9
q;
qa
qg
qf
qs
qd
AMS ./>, PRESET+/– 5
(9,13,14,15)
CD N wa (9)
CHECK 8 (10)
CLEAR 7 (10)
DECK A N ql (15)
DECK B N qk (15)
DISC SKIP 1 (9,10,17)
FILE SELECT ON/OFF qf (18)
FILE SELECT F/f qg (11)
FLASH qs (11)
BUTTON DESCRIPTIONS
@/1 3
x 4
m/M 6
X ws
FUNCTION qa (7,9,10,16,17,23,24)
LOOP qh (11)
MD N qj
MD X 0
MD x 9
SLEEP 2 (21)
TUNER/BAND w;(12,16)
VOL +/– qd (9,13)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Do the following procedure 1 to 4 to hook up your system using the supplied cords and
accessories.
AM loop antenna
FM antenna
Right speaker
Left speaker
1 Connect the speakers.
Connect the speaker cords to the SPEAKER
jacks as below.
2 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Insert only the stripped portion.
Jack type A
Extend the FM lead
antenna horizontally.
Red/Solid (3)
AM loop antenna
Black/Stripe (#)
FM 75
AM
Note
Keep the speaker cords away from the antennas to
prevent noise.
Jack type B
Extend the FM lead
antenna horizontally.
AM loop antenna
COAXIAL
FM 75
A
M
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
Notice for customers in the United
Kingdom
The AC power cord has been fixed temporarily on
the rear panel with the plug band for shipment.
Unlock the plug band to remove the plug.
VOLTAGE SELECTOR
120V
220V
Back panel
~
230 240V
4 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
Plug band
When carrying this system
Do the following to protect the CD mechanism.
1 Make sure that all discs are removed from
the unit.
2 Press FUNCTION repeatedly until “CD”
appears.
3 Hold down LOOP and then press ?/1 until
“LOCK” appears.
4 Unplug the AC power cord.
Before connecting the Front speaker
Stick the supplied front speaker pads to the
bottom of the front speakers to stabilize the
speakers and prevent them from slipping.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting two size AA (R6)
batteries into the remote
Saving the power in
standby mode
Press POWER SAVE/DEMO (STANDBY)
when the power is off. Every time you
press the button, the system switches as
follows:
Power Saving Mode y Demonstration
The system is turned on/off by pressing ?/1.
Tips
Tip
• ?/1 indicator lights up even in the Power Saving
Mode.
When the remote no longer operates the system,
replace both batteries with new ones.
• The timer works in the Power Saving Mode.
• Everytime you press DISPLAY when the power is
off, the display changes as follows:
Demonstration y Clock
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving Mode
Press POWER SAVE/DEMO (STANDBY) to
show the demonstration.
Setting the time
1 Turn on the system.
2 Press c/CLOCK SET.
When you set the time for the first time,
skip to the step 5.
3 Press v/V repeatedly to select SET
CLOCK.
4 Press ENTER/NEXT.
5 Press v/V repeatedly to set the hour.
6 Press ENTER/NEXT.
The minute indication flashes.
7 Press v/V repeatedly to set the minute.
8 Press ENTER/NEXT.
The clock starts working.
Tip
If you’ve made a mistake or want to change the time,
start over from step 1.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Other Operations
Loading the CD
To
Do this
Stop playback
Pause
Press x.
1 Press PUSH OPEN.
Press HX (or X on the
remote). Press again to
resume play.
The front cover opens.
2 Place a CD with the label side up on the
Select a track
During play or pause, turn
the jog dial clockwise (to
go forward) or
counterclockwise (to go
backward) (or press
disc tray.
When you play
a CD single,
place it on the
inner circle of
the tray.
AMS.( to go forward)
or AMS> (to go
backward) on the remote).
To insert additional discs, press DISC SKIP
to rotate the disc tray.
Find a point in a track
Select a CD
Press and hold M or m
during playback, and
release at the desired point.
3 Close the front cover.
Press DISC 1~5 or DISC
SKIP (or DISC SKIP on the
remote).
Playing the CD
Switch to CD function
from another source
Press DISC 1~5 or HX
(or CD N on the remote)
(Automatic Source
Selection).
––Normal Play/Shuffle Play/Repeat
Play
Play repeatedly
(Repeat Play)
Press REPEAT during
playback until “REPEAT”
or “REPEAT1” appears.
REPEAT: For all the tracks
on the CD.
This unit lets you play the CD in different play
modes.
Disc number in the playing position
Track number
Elapsed time
REPEAT1: For a single
track only.
To cancel playing
DOLBY NR
OFF
VOLUME
repeatedly, press REPEAT
until “REPEAT” or
“REPEAT1” disappears.
1 Press FUNCTION repeatedly until “CD”
Remove the CD
Press PUSH OPEN.
appears.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
2 Press PLAY MODE repeatedly until the
mode you want appears.
Tip
Select
To play
You can change the CD in the loading position during
playback of the CD in the playing position.
ALL DISCS
All CDs in the disc tray
continuously.
1 DISC
The CD you selected in the
original order.
ALL DISCS
SHUFFLE
The tracks on all CDs in random
order.
1 DISC
SHUFFLE
The tracks on the CD you
selected in random order.
PROGRAM
The tracks on all CDs in the
order you want them to be
played (see “Programming the
CD tracks” on page 10).
3 Press HX (or CD N on the remote).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Press
Playing CDs without
interruption
Cancel Program Play
PLAY MODE repeatedly
until “PROGRAM,” “ALL
DISCS SHUFFLE” or “1
DISC SHUFFLE”
–– Non-Stop Play
disappears.
Check the program
CHECK on the remote
repeatedly. After the last
track, “CHECK END”
appears.
You can play CDs without pausing between
tracks.
1 Press FUNCTION repeatedly until “CD”
Clear a track from
the end
CLEAR on the remote in
stop mode.
appears, then load a CD.
2 Press NON STOP so that the indicator
Clear a specific track
in stop mode
CHECK on the remote
repeatedly until the number
of the track to be erased
lights up, then press
CLEAR.
on this button lights up.
3 Press HX.
To cancel Non-Stop Play
Press NON STOP so that the indicator on this
button goes off.
Add a track to the
program in stop mode
1 Press DISC SKIP to
select a CD.
2 Turn the jog dial to select
a track.
3 Press PLAY MODE.
Programming the CD
tracks
Clear the entire
program
x once in stop mode or
twice while playing.
–– Program Play
Tips
• The program you made remains in the CD player
after it has been played back. Press HX to play
the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
You can make a program of up to 32 tracks
from all the CDs in the order you want them to
be played.
1 Press FUNCTION repeatedly until “CD”
– you have programmed a track number
which exceeds 20.
appears, then load a CD.
– the total playing time has exceeded 100 minutes.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears.
3 Press DISC SKIP to select a CD.
4 Turn the jog dial until the track you
want appears.
5 Press PLAY MODE once.
The track is programmed. First “STEP” and
the programmed playing order appear, then
the total playing time appears.
6 To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7 Press HX.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DJ Effects
Using the CD display
You can check the remaining time of the
current track or that of the CD.
Looping and flashing part of a
CD
When a CD TEXT disc is loaded, you can
check the information stored on the disc, such
as the titles or artist names. When the unit
detects CD TEXT discs, the “CD-TEXT”
indication appears.
With the loop function, you can repeat part of a
CD during playback. With the flash function,
you can “flash” part of a CD sound during
playback. Both functions let you create original
recordings.
Press DISPLAY.
Do this
To
During normal playback
Press and hold LOOP or
FLASH during playback.
Start the function at the
point you want
Playing time on the current track t
Remaining time on the current track t
Remaining time on current CD (1 DISC mode)
or “--.-- ” display (ALL DISCS mode) t Title
name of the current track* t Clock display
(for a few seconds) t Effect status
Release LOOP or FLASH.
Resume normal play
Turn the jog dial while
holding LOOP or FLASH
(or press FILE SELECT
F/f while holding LOOP or
FLASH on the remote).
Adjust the function
length (LOOP lengths
or FLASH lengths)
In the stop mode
When the CD player is in program mode and
there is a program:
Press and hold both LOOP
and FLASH at the same
time.
Use FLASH and LOOP
together
The last track number of the program and the
total playing time t The last track number of
the current CD and the total playing time t
Clock display (for a few seconds) t Effect
status
Notes
• Adjust the loop and flash lengths independently
before using the functions if necessary.
• To record the loop or flash effect, use the tape deck
on this unit.
In other conditions:
The current disc number t Disc title* t The
artist information* t Total number of tracks
and total playing time t Clock display (for a
few seconds) t Effect status
* With CD TEXT discs only (certain characters
cannot be displayed). When the CD contains more
than 20 tracks, CD TEXT is not displayed from
track 21 on.
Notes
• The display may not show all the characters
depending on the disc.
• This player can only display the disc titles, track
titles and artist names from CD TEXT discs. Other
information cannot be displayed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
To set another station to the
existing preset number
Start over from step 1. After step 4, press +/– to
select the preset number you want to store for
another station.
Presetting radio stations
You can preset 20 stations for FM and 10
stations for AM.
You can add a new preset number after the last
preset number.
1 Press TUNER/BAND repeatedly until
the band you want appears.
To erase the preset station
Each time you press this button, the band
changes as follows:
FM y AM
1 Hold down TUNER MEMORY until a preset
number appears.
2 Press TUNING MODE repeatedly until
“AUTO” appears.
DOLBY NR
OFF
VOLUME
3 Press +/– until the frequency indication
starts to change.
Scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear.
2 Press +/– to select the preset number you
want to erase.
Select “ALL ERASE” when you want to
erase all the preset stations.
MHz
DOLBY NR
OFF
VOLUME
3 Press ENTER.
“COMPLETE” appears.
When you erase a preset number, the preset
number decreases by one and all preset
numbers following the erased one are
renumbered.
4 Press TUNER MEMORY.
The next available preset number flashes in
the display. The stations are stored from
preset number 1.
To change the AM tuning interval
(Except for the European and Middle
Eastern models)
Preset number
DOLBY NR
OFF
The AM tuning interval is factory set to 9 kHz (10
kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off the
power. While holding down the ENTER button, turn
the power back on. When you change the interval,
AM preset stations will be erased. To reset the
interval, repeat the same procedure.
VOLUME
5 Press ENTER.
“COMPLETE” appears and the station is
stored.
Tip
6 Repeat steps 1 to 5 to store other
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press +/–
to tune in the station.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
Using the Radio Data
System (RDS)
–– Preset Tuning
(For European model only)
Preset radio stations in the tuner's memory first
(see “Presetting radio stations” on page 12).
What is the Radio Data System?
1 Press TUNER/BAND repeatedly until
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display and
location of stations by program type. RDS is
available only on FM stations*.
the band you want appears.
2 Press TUNING MODE repeatedly until
“PRESET” appears.
Each time you press this button, the tuning
mode changes cyclically as follows:
MANUAL t AUTO t PRESET
Note
3 Press +/– (or PRESET +/– on the
remote) to tune in the preset station
you want.
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly
or if the signal strength is weak.
Preset number*
Frequency
* Not all FM stations provide RDS service, nor do they
all provide the same types of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
MHz
DOLBY NR
OFF
VOLUME
* When only one station is preset, “ONE PRESET”
appears.
Receiving RDS broadcasts
Simply select a station from the FM band.
To
Do this
When you tune in a station that provides RDS
services, the station name appears.
Turn off the radio
Adjust the volume
Press ?/1.
Turn VOLUME (or press
VOL +/– on the remote).
To check the RDS information
Each time you press DISPLAY, the display
changes cyclically as follows:
To listen to non-preset radio stations
Station name* t Frequency t Program
type* t Clock display t Effect status
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press +/– to
tune in the desired station.
* If the RDS broadcast is not received, the station
name and program type may not appear in the
display.
Tips
• When an FM program is noisy, press
STEREO/MONO so that “MONO” appears. There
will be no stereo effect, but the reception will
improve.
continued
• To improve broadcast reception, reorient the
antennas.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS)
(continued)
Locating a station by
program type (PTY)
You can locate a station you want by selecting
a program type. The tuner tunes in the type of
programs currently being broadcast from the
RDS stations stored in the tuner’s preset
memory.
The types of programs include NEWS,
AFFAIRS (current news), INFORMATION,
SPORT, EDUCATION (education programs),
DRAMA, CULTURE, SCIENCE, VARIED
(interviews, games and comedy), POP, ROCK ,
EASY MUSIC (Easy listening),
L.CLASSICAL (Classical music, such as
instrumental, vocal, and choral works),
S.CLASSICAL, OTHER MUSIC (music, such
as rhythm and blues and reggae), WEATHER,
FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE,
JAZZ, COUNTRY (country music), NATION
(nation's popular music), OLDIES, FOLK,
DOCUMENTARY (investigative features),
ALARM TEST (test signal for emergency
broadcast), ALARM-ALARM (emergency
broadcast), and NONE (any programs not
defined above).
1 Press PTY while listening to the radio.
2 Press +/– to select the program type
you want.
3 Press ENTER.
“SEARCH” and the selected program type
are shown alternately in the display.
When the tuner receives a program, the
preset station number flashes.
4 Press +/– to continue searching for the
station number you want.
5 Press ENTER while the preset station
number you want is flashing.
To stop the search while it is in
progress
Press PTY.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape
Tips
• The deck stops automatically after repeating the
sequence five times.
Loading a tape
• You can fast-forward or rewind the tape, regardless
of the selected source.
• When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
“DOLBY NR B” appears.
1 Press A EJECT Z or Z B EJECT.
2 Insert a tape in deck A or B with the
side you want to play facing forward.
Searching for the beginning of a
track (AMS)
During playback, press . or > repeatedly
for the number of songs you want to skip
forward (or backward).
Insert with the
side you want to
play/record facing
forward.
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear.
Playing a tape
You can play any type of tape. TYPE I
(normal), TYPE II (CrO2), or TYPE IV (metal).
The deck automatically detects the tape type.
Example: searching forward 2 songs
1 Load a recorded tape.
Note
2 Press DIRECTION repeatedly to select
g to play one side. Select j to play
both sides. Select RELAY (Relay Play)*
to play both decks in succession.
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the unit is placed near a television.
3 Press H.
Press h to play the reverse side. The tape
starts playing.
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
To
Do this
Stop play
Press x.
Pause
Press X.
(deck B only)
Press again to resume play.
Fast-forward
Rewind
Press M or m in stop mode.
Press m or M in stop mode.
Remove the
cassette
Press A EJECT Z (or Z B
EJECT).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording to a tape
–– CD Synchro Recording/High Speed Dubbing/Recording Manually/
Program Edit
You can record from a CD, tape or radio. You can use TYPE I (normal) or TYPE II (CrO2) tapes.
The recording level is adjusted automatically.
Recording from a CD
(CD Synchro Recording)
Recording from a tape
(High-Speed Dubbing)
Steps
Recording Manually
Insert a recordable tape into deck B.
1
2
Press FUNCTION
repeatedly until “CD”
appears.
Press FUNCTION
repeatedly until “TAPE”
appears.
Press FUNCTION or
TUNER/BAND
repeatedly until the
source or band you
want to record appears.
Insert the CD you want to
record.
Insert the tape you want to Insert the CD/tape, or
3
4
record into deck A.
tune to the station you
want to record.
Press CD SYNC.
Press H SPEED DUB.
Press z REC.
DECK B stands by for recording.
To reduce the hiss noise in low level high frequency signals, press DOLBY NR so that
“DOLBY NR B” appears in the display (except when recording from a tape).
Press DIRECTION repeatedly to select g to record on one side.
Select j (or RELAY) to record on both sides.
5
Press X.
Recording starts.
6
7
Start playing the
source to be recorded.
To stop recording
Press x.
Tips
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• To record with the surround effect, press
• When you want to record on the reverse side, press
h after pressing z REC so that the indicator on
the h button (for the reverse side) lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the tape:
SURROUND so that “SUR
” appears.
The equalizer settings will not be recorded.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
If you set the direction to j when the tapes you
use have different lengths, the tapes in each deck
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a CD by specifying
track order
Timer-recording radio
programs
— Program Edit
To timer-record, you must preset the radio
station (see “Presetting radio stations” on page
12) and set the clock (see “Setting the time” on
page 8) beforehand.
When programming, make sure the playing
times for each side do not exceed the length of
one side of the tape.
1 Load CDs and a recordable tape into
1 Tune in the preset radio station (see
deck B, then press FUNCTION
“Listening to the radio” on page 13).
repeatedly until “CD” appears.
2 Press c/CLOCK SET.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears.
3 Press v/V repeatedly to select “REC,”
then press ENTER/NEXT.
3 Select a CD and track by pressing DISC
SKIP and turning the jog dial, then
press PLAY MODE once.
“ON” appears and the hour indication
flashes in the display.
Repeat this procedure to program the
remaining tracks for A side.
4 Set the time to start recording.
Press v/V to set the hour, then press
ENTER/NEXT.
4 Press X on the remote to insert a
pause at the end of side A.
The minute indication starts flashing.
“P” appears and the total playing time resets
to “0.00” in the display.
Press v/V to set the minute, then press
ENTER/NEXT.
The hour indication flashes again.
5 Repeat step 3 to program the remaining
tracks to be recorded on side B.
5 Set the time to stop recording following
the above procedure.
6 Press CD SYNC.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
Deck B stands by for recording.
7 Press DIRECTION repeatedly to select
g to record on one side.
Select j (or RELAY) to record on
both sides.
6 Insert a recordable tape into deck B.
8 Press X.
7 Turn off the power.
Recording starts.
When the recording starts, the volume level
is set to the minimum.
9 Press x on the deck B and the CD
To
Do this
player to stop recording.
Check the setting
Press TIMER SELECT. Press
v/V to select “SEL REC.”
Then, press ENTER/NEXT. To
change the setting, start over
from step 1.
Tip
To check the required tape length for recording a CD,
press EDIT so that “EDIT” flashes after you have
loaded a CD and switched function to CD. The
required tape length for the currently selected CD
appears, followed by the total playing time for side A
and side B respectively (Tape Select Edit).
Cancel timer
operation
Press TIMER SELECT. Press
v/V to select “TIMER OFF.”
Then, press ENTER/NEXT.
Notes
• You cannot use Tape Select Edit for discs
containing over 20 tracks.
Notes
• The system turns on 15 seconds before the preset
time.
• If the system is on at the preset time, the Timer
recording will not be made.
• You cannot use this function when Program Play
mode has been set. After clearing the entire
program, follow the above procedure.
• When you use the Sleep Timer, Daily Timer and
Timer recording will not turn on the system until
the Sleep Timer turns it off.
17
• Recording starts from the front side.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
Selecting the audio
emphasis effect
Adjusting the sound
To reinforce lower bass sound
(SUPER WOOFER)
Press SUPER WOOFER.
Selecting the preset effect from the
music menu
Press DIRECT EQUALIZER button you want.
Each time you press this button, the super
woofer level display changes cyclically as
follows:
The preset effect name appears.
See the chart “Music menu options.”
To
Press
SUPER WOOFER FLAT t LOW t HIGH
Select USER FILE
Cancel the effect
P.FILE
To select the super woofer mode
Press SUPER WOOFER MODE while the
super woofer is on.
FLAT (or FILE SELECT
ON/OFF on the remote).
Each time you press this button, the super
woofer mode display changes as follows:
Music menu options
“SUR
” appears if you select an effect
MODE MOVIE y MODE MUSIC
with surround effects.
For a powerful sound (GROOVE)
Effect
For
Press GROOVE.
SALSA
REGGAE
SAMBA
TANGO
MOVIE
DANCE
JAZZ
standard music sources
The volume switches to power mode, the
equalizer curve changes, and the indicator on
the GROOVE button lights up.
Press GROOVE again to return to the previous
volume.
ROCK
Note
GAME
GUITAR
soundtracks and special
listening situations
Canceling the Groove mode cancels the equalizer
curve and super woofer level. Adjust the equalizer
settings to obtain the desired effect.
Selecting the surround
effect
Press SURROUND.
Every time you press the button, the display
changes as follows:
SURROUND ON (SUR
)
Y
SURROUND OFF
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a personal audio
emphasis file
–– Personal File
You can create personal files of audio patterns
(surround effect and graphic equalizer) and
store them in the system’s memory. Later, you
can call up an audio pattern when playing a
favorite tape, CD, or radio program.
Before operating, first select the basic audio
emphasis you want for your sound.
1 Press b/B to select the frequencies,
then press v/V to adjust the level.
Frequency level
DOLBY NR
OFF
VOLUME
ALL DISC
S
2 Press ENTER/NEXT.
This setting is automatically stored as
P.FILE.
Any settings previously stored at this
memory location are erased and replaced by
the new settings.
To call up the personal file
Press P.FILE.
Tip
If you choose another audio emphasis, the adjusted
sound effect is lost. To retain the adjusted sound
effect, press P.FILE.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Other features
Notes
• With some songs, vocals may not be canceled when
you select “MIX GUITAR/KARAOKE.”
• During MIX GUITAR/KARAOKE, equalizer and
surround settings cannot be changed.
• If you select a sound effect, the karaoke mode is
canceled.
• The instrumental sound may be reduced as well as
the singer’s voice when the sound is recorded in
monaural.
Changing the spectrum
analyzer display
Press SPECTRUM ANALYZER.
Each time you press the button, the display
changes cyclically as follows:
• The singer’s voice may not be reduced when:
— only a few instruments are playing.
— a duet is being played.
IMAGE ILLUMINATION t IMAGE t
NORMAL ILLUMINATION t NORMAL
— the source has strong echoes or chorus.
— the singer’s voice deviates from the center.
— the voice on the source is singing in high
soprano or tenor.
Singing along: Karaoke
You can sing along with any stereo CD or tape
by turning down the singer’s voice. You need
to connect an optional microphone.
Mixing and recording sound
1Do the procedure for “Singing along”
(steps 1 through 5). Then, load a
recordable tape in deck B.
1 Turn MIC LEVEL to MIN to turn down
the microphone control level.
2Press FUNCTION repeatedly to select
the source you desire and set it to
pause mode.
2 Connect an optional microphone to MIX
MIC.
3 Press MIX GUITAR/KARAOKE.
Each time you press the button, the display
changes as follows:
3Press z REC.
4Press DIRECTION repeatedly to select
g to record on one side. Select j
(or RELAY) to record on both sides.
MIX GUITAR/KARAOKE y OFF or
audio emphasis name
5Press X.
The m indicator appears when karaoke mode is
activated.
To sing karaoke by decreasing the vocal level of a
6Press HX to start playing the CD (or
H on deck A to start playing the tape).
CD or TAPE, select “MIX GUITAR/
Start singing along with the music.
4 SKtAaRrtApOlKayEi.”ng the music and adjust the
To stop recording
Press x.
volume.
5 Adjust the microphone volume by
Tips
turning MIC LEVEL.
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
After you have finished
Turn MIC LEVEL to MIN and disconnect the
microphone from MIX MIC, then press MIX
GUITAR/KARAOKE repeatedly until “m”
disappears.
• If you want to record your voice through the
microphone only, you can do so by selecting the
CD function and not playing a CD.
• When high level sound signals are input, the unit
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control Function).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a guitar
Falling asleep to music
— Sleep Timer
You can enjoy playing the guitar by connecting
an electric guitar to the GUITAR jack on the
front panel.
You can have the system turn off at a preset
time, so you can fall asleep to music.
When you select “MIX GUITAR/KARAOKE”
by pressing MIX GUITAR/KARAOKE, you
can play along with any stereo CD or tape.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes as follows:
You can select your preferred sound
characteristics by adjusting the GUITAR
LEVEL.
AUTO t 90 t 80 t 70 t … t 10 t
OFF t AUTO* …
* The power turns off when the current CD or tape
finishes playback (for up to 100 minutes).
Using the Guitar distortion
effect
To
Press
Check the remaining
time
SLEEP once.
Press GUITAR DISTORTION.
The indicator on the GUITAR DISTORTION
button lights up.
Change the time to turn
off
SLEEP to select the time
you want.
Once GUITAR DISTORTION is activated, it
will remain active while the power is on even if
the function is changed.
Cancel the Sleep Timer
function
SLEEP repeatedly until
“SLEEP OFF” appears.
To turn off GUITAR DISTORTION, press
GUITAR DISTORTION again, the indicator
on this button goes off.
Note
Playing a guitar with this unit may cause distortion or
howling. To avoid this, do the followings:
— Move the guitar away from the speakers.
— Turn down the guitar volume.
Enhancing video game
sound
–– Game Sync
You can enjoy the sound effect of video games.
1 Connect a video game player (see
“Connecting MD deck/VCR/camcorder/
video game” on page 23).
2 Press GAME at the right side corner on
the front panel (see qa, “Parts
Identification” on page 4) .
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Do this
Waking up to music
Check the setting
Press TIMER SELECT and
then press v/V to select
“DAILY,” then press
ENTER/NEXT.
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the time” on page 8).
Change the setting
Start from step 1.
Cancel the timer
operation
Press TIMER SELECT and
then v/V to select “OFF,”
then press ENTER/NEXT.
1 Prepare the music source you want to
play.
• CD: Load a CD. To start from a specific
track, make a program (see “Programming
the CD tracks” on page 10).
Note
When you use the Sleep Timer, Daily Timer and
Timer recording will not turn on the system until the
Sleep Timer turns it off.
• Tape: Load a tape with the side you want
to play facing forward.
Tip
• Radio: Tune in the preset station you
want (see “Presetting radio stations” on
page 12).
The power turns on 15 seconds before the preset time.
2 Adjust the volume.
3 Press c/CLOCK SET.
“SET” appears and “DAILY” flashes in the
display.
4 Press v/V repeatedly to select
“DAILY,” then press ENTER/NEXT.
“ON” appears and the hour digits flash in
the display.
5 Set the time to start playback.
Press v/V repeatedly to set the hour, then
press ENTER/NEXT.
The minute indication starts flashing.
Press v/V repeatedly to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.
6 Set the time to stop playback following
the above procedure.
7 Press v/V repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8 Press ENTER/NEXT.
The start time, stop time, and the music
source appear, then the original display
appears.
9 Turn off the power.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up the optional components
To
Do This
Make a digital
recording from
CD to MD
Connect the optical cable.
Connecting MD deck/VCR/
camcorder/video game
Listen to the
Press FUNCTION repeatedly
connected MD deck until “MD” appears.
To the audio
To the audio To the audio
outputs of your inputs of your outputs of your
Listen to the
connected VCR
Press FUNCTION repeatedly
until “VIDEO” appears.
MD deck
MD deck
VCR
Listen to the sound
from the connected
camcorder or video
game
Press FUNCTION repeatedly
until “GAME” appears or
press GAME at the right side
corner on the front panel.
Notes
• If sound is distorted when you connect your VCR to
the VCR input jack of the unit, connect your VCR
to the MD input jack instead.
• Be sure to match the color of the plugs and the
connectors.
To the digital To the video
To the video
output of your
VCR
input of your
MD deck
input of your
TV
GAME
To the video output
of your video game
To the audio outputs
of your video game
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Connecting a turntable/
mixer
You can also record the sound produced by the mixer
onto a tape.
Notes
• Using a turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
produce the distortion or howling. To avoid this, do
the following:
(mixer for European, North
American, and Mexican models only)
To the outputs
of your mixer
To the audio outputs
of your turntable
To the inputs of
your mixer
1 Keep some distance from speakers and the
turntable.
2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and
stable surface.
4 Press SUPER WOOFER repeatedly until the
indicator on this button goes off.
• Replace the jumpers when the mixer is not in use.
Otherwise, no sound will be heard. Be sure to
connect the jumpers from the RETURN jack to the
SEND jack of the unit.
Two jumpers are pre-installed connecting the DJ
MIX RETURN and SEND jacks.
To
Do This
Listen to the
Press FUNCTION repeatedly
connected turntable
until “PHONO” appears.
Listen to the
connected mixer
1 Remove the jumper from
the unit.
2 Connect the SEND jack of
the unit to the IN jack of the
mixer with an optional
cable.
3 Connect the RETURN jack
of the unit to the OUT jack
of the mixer with an
optional cable.
4 Press FUNCTION
repeatedly until “CD”
appears.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
• Discs with non- standard shapes (e.g., heart, square,
star) cannot be played on this unit. Do not use such
discs.
Precautions
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
On operating voltage
Before operating the unit, check that the operating
voltage of your unit is identical with the voltage of
your local power supply.
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape. However, be
careful not to cover the detector slots which allow the
tape player to automatically detect the type of tape.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the unit from the wall outlet (mains) if it is
not to be used for an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
component, unplug the unit and have the
component checked by qualified personnel before
operating it any further.
Detector slots
• The AC power cord must be changed only at the
qualified service shop.
Tab of side B
Tab of side A
Tape type:
Tape type:
Normal
CrO2/Metal
On placement
• Do not place the unit in an inclined position.
• Do not place the unit in locations where it is:
— extremely hot or cold
— dusty or dirty
— very humid
— vibrating
Detector slots
— subject to direct sunlight
Break off the
cassette tab of
side A
On heat buildup
• Although the unit heats up during the operation,
this is not the malfunction.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
• Place the unit in a location with adequate
ventilation to prevent heat build-up in the unit.
If you continuously use this unit at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding, etc.
frequently. The tape may get entangled in the tape
deck.
To prevent a malfunction, do not cover the ventilation
hole for cooling fan.
On operation
• If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player.
Should this occur, the unit will not operate properly.
Remove the CD and leave the unit turned on for
about an hour until the moisture evaporates.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
• When you move the unit, take out any discs.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Demagnetizing the tape heads
Notes on CDs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out.
• Do not use solvents.
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
• Do not expose the CD to direct sunlight or heat
sources.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no guitar sound.
Troubleshooting
• Turn VOLUME or GUITAR LEVEL to adjust
the guitar volume.
If you run into any problem using this unit, use
the following check list.
• Make sure the guitar is connected to the
GUITAR jack correctly.
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
• Select “MIX GUITAR/KARAOKE” by pressing
MIX GUITAR/KARAOKE.
There is severe hum or noise.
Should any problem persist, consult your
nearest Sony dealer.
• A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
General
“0:00” (or “12:00 AM”) flashes in the display.
• A power interruption occurred. Set the clock and
The display starts flashing as soon as you plug
in the power cord even though you haven’t
turned on the power.
timer settings again.
The timer does not function.
• Set the clock correctly.
• Refer to demonstration (see page 7, step 4).
DAILY and REC do not appear when you press
the c/CLOCK SET button.
The clock setting is canceled.
• The power cord is disconnected or a power
failure occurs. Redo “Setting the time” (on page
8). If you have set the timer, redo “Waking up to
music” (on page 22) and “Timer-recording radio
programs” (on page 17).
• Set the timer correctly.
• Set the clock.
The remote does not function.
• There is an obstacle between the remote and the
system.
The radio presetting/timer setting is canceled.
• The remote is not pointing in the direction of the
system’s sensor.
• The power cord is disconnected or a power
failure occurs for longer than half a day. Redo
“Presetting radio stations” (on page 12).
• The batteries have run down. Replace the
batteries.
There is no sound.
There is acoustic feedback.
• The jumpers for the DJ MIX jacks are not
connected (for European, North American, and
Mexican models only).
• Decrease the volume level.
• Move the microphone away form the speakers or
• Turn VOLUME clockwise.
change the direction of the microphone.
• The headphones are connected.
The color irregularity on a TV screen persists.
• Insert only the stripped portion of the speaker
cord into the SPEAKER jack. Inserting the vinyl
portion of the speaker cord will obstruct the
speaker connections.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
• The protective device on the amplifier has been
activated because of a short circuit.
(“PROTECT” and “PUSH POWER” flash
alternately.) Turn off the unit, eliminate the
short-circuit problem and turn on the power
again.
• There is no audio output during timer recording.
There is no microphone sound.
• Turn VOLUME or MIC LEVEL to adjust the
microphone volume.
• Make sure the microphone is connected to the
MIX MIC jack correctly.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers
There is excessive wow or flutter, or the sound
drops out.
“PROTECT” and “PUSH POWER” appear
• The capstans or pinch rollers are dirty (see
“Cleaning the tape heads” on page 25).
alternately.
• A strong signal was input. Press ?/1 to turn off
the power, leave the system turned off for a
while, then press ?/1 again to turn on the power.
Noise increases or the high frequencies are erased.
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 25).
• Check the speaker cables in case “PROTECT”
and “PUSH POWER” appear alternately again
after you turn the system on.
Tuner
Sound comes from one channel or unbalanced
left and right volume.
Severe hum or noise (“TUNED” or “STEREO”
• Check the speaker connection and speaker
flashes in the display).
placement.
• Adjust the antenna.
• The signal strength is too weak. Connect the
external antenna.
CD Player
A stereo FM program cannot be received in stereo.
• Press STEREO/MONO so that “STEREO”
The CD tray does not close.
disappears.
• The CD is not placed properly.
The CD will not play.
If other troubles not described above
occur, reset the system as follows:
• The CD is not lying flat in the disc tray.
• The CD is dirty (see “Notes on CDs ” on page
25).
1 Press c/CLOCK SET, ENTER/NEXT and
?/1 at the same time.
• The CD is inserted label side down.
2 Unplug the power cord.
• The CD is moist.
3 Plug the power cord back in.
Play does not start from the first track.
• The player is in program or shuffle mode. Press
PLAY MODE repeatedly until “PROGRAM,”
“ALL DISCS SHUFFLE,” or “1 DISC
SHUFFLE” disappears.
4 Press ?/1 to turn on the power.
The unit is reset to factory settings. All the
settings you made are cleared.
Tape Deck
The tape does not record.
• The tab has been removed from the cassette (see
“To save a tape permanently” on page 25).
• The tape has reeled to the end.
The tape does not record nor play, or there is a
decrease in sound level.
• The heads are dirty (see “Cleaning the tape
heads” on page 25).
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 25).
The tape does not erase completely.
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 25).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Inputs
DJ MIX*:
(phono jacks)
Specifications
sensitivity 250 mV,
impedance 47 kilohms
GUITAR IN:
(phone jack)
AUDIO POWER SPECIFICATIONS:
(LBT-XG500 USA models only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
sensitivity 75 mV,
impedance 470 kilohms
PHONO IN:
(phono jacks)
sensitivity 3 mV,
impedance 47 kilohms
MIX MIC:
(phone jack)
With 6 ohm loads both channels driven, from
120-10,000 Hz; rates 140 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion.
sensitivity 1 mV,
impedance 10 kilohms
VIDEO IN:
(phono jacks)
sensitivity 250 mV,
impedance 47 kilohms
GAME IN:
(phono jacks)
sensitivity 250 mV,
Amplifier section
Canadian model:
LBT-XG500
Continuous RMS power output (reference)
160 + 160 watts (6 ohms at
1 kHz, 10% THD)
impedance 47 kilohms
MD IN:
(phono jack)
sensitivity 450 mV,
impedance 47 kilohms
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 70 W)
Outputs
DJ MIX*:
(phono jacks)
sensitivity 250 mV,
impedance 1 kilohms
European model:
LBT-XG700
DIN power output (rated) 200 + 200 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
250 + 250 watts
(6 ohms at 1 kHz, 10% THD)
Music power output (reference)
430 + 430 watts
PHONES:
(stereo phone jack)
accepts headphones of 8
ohms or more
VIDEO OUT:
(phono jack)
voltage 250 mV
impedance 1 kilohm
MD OUT:
(phono jacks)
voltage 250 mV
impedance 1 kilohm
(6 ohms at 1 kHz, 10% THD)
FRONT SPEAKER:
LBT-XG80:
LBT-XG500
DIN power output (rated) 110 + 110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
140 + 140 watts
(6 ohms at 1 kHz, 10% THD)
Music power output (reference)
240 + 240 watts
accepts impedance of 4 to
16 ohms
LBT-XG700/XG500/XG60:
accepts impedance of 6 to
16 ohms
* European, North American, and Mexican models
only
(6 ohms at 1 kHz, 10% THD)
Other models:
LBT-XG80
The following measured at AC 120/220/240V, 50 Hz
DIN power output (rated) 240 + 240 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
320 + 320 watts
(4 ohms at 1 kHz, 10% THD)
LBT-XG60
The following measured at AC 120/220/240V, 50 Hz
DIN power output (rated) 150 + 150 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
200 + 200 watts
(6 ohms at 1 kHz, 10% THD)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
Speakers
System
Compact disc and digital
audio system
North American and European models:
SS-XG500 for LBT-XG500
Laser
Semiconductor laser
(λ=780nm), Emission
duration: continuous
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
Speaker system
3-way BUILT IN SW,
bass-reflex type
Speaker units
Super Woofer/Woofer:
Tweeter:
Rated impedance
Dimensions (w/h/d)
Wavelength
17 cm/17 cm, cone type
2.5 cm, horn type
6 ohms
Approx. 255 × 530 × 330
mm (North American
model)
Frequency response
Signal-to-noise ratio
Dynamic range
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
More than 90 dB
Wavelength:
Output level
660 nm
–18 dBm
Approx. 255 × 530 × 375
mm (European model)
Approx. 9 kg net per
speaker (North American
model)
Approx. 10 kg net per
speaker (European model)
Mass
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
4-track 2-channel stereo
40 – 13,000 Hz (±3 dB),
using Sony TYPE I cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II cassette
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Other models
speaker SS-XG60 for LBT-XG60
Speaker system
3-way BUILT IN SW,
bass-reflex type,
magnetically shielded type
Wow and flutter
Speaker units
Super Woofer/Woofer:
Tweeter:
Rated impedance
Dimensions (w/h/d)
17 cm/17 cm, cone type
2.5 cm, horn type
6 ohms
Tuner section
FM stereo, FM/AM superheterodyne tuner
Approx. 255 × 530 × 375
mm
FM tuner section
Tuning range
North American models: 87.5 – 108.0 MHz (100
Mass
Approx. 10 kg net per
speaker
kHz step)
87.5 – 108.0 MHz
(50 kHz step)
FM lead antenna
75 ohm unbalanced
10.7 MHz
SS-XG700/XG80 for LBT-XG700/XG80
Other models:
Speaker system
3-way BUILT IN SW,
bass-reflex type,
Antenna
Antenna terminals
Intermediate frequency
magnetically shielded type
Speaker units
Super Woofer:
Woofer:
22 cm, cone type
20 cm, cone type
2.5 cm, horn type
Tweeter:
AM tuner section
Tuning range
Pan- American models:
Rated impedance
SS-XG80
SS-XG700
4 ohms
6 ohms
530 – 1,710 kHz
(with the interval set at 10
kHz)
531 – 1,710 kHz
(with the interval set at 9
kHz)
Dimensions (w/h/d)
Approx. 290 × 615 × 435
mm
Mass
Approx. 16 kg net per
speaker
European and Middle Eastern models:
531 – 1,602 kHz
continued
(with the interval set at 9
kHz)
531 – 1,602 kHz
(with the interval set at 9
kHz)
Other models:
530 – 1,710 kHz
(with the interval set at 10
kHz)
AM loop antenna
External antenna terminal
450 kHz
Antenna
Antenna terminals
Intermediate frequency
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (continued)
General
Power requirements
North American models: 120 V AC, 60 Hz
European models:
Mexican model:
Australian model:
230 V AC, 50/60 Hz
120 V AC, 50/60 Hz
230 – 240 V AC, 50/60
Hz
Other models:
120 V, 220 V or 230 – 240
V AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
U.S.A. models:
LBT-XG500
240 watts
320 VA
Canadian model:
LBT-XG500
European models:
LBT-XG700
220 watts
0.6 watts (at the power
saving mode)
LBT-XG500
220 watts
0.6 watts (at the power
saving mode)
Other models:
LBT-XG80
LBT-XG60
300 watts
180 watts
Dimensions (w/h/d)
Approx. 355 x 425 x 450
mm
Mass :
LBT-XG700
LBT-XG500
LBT-XG80
LBT-XG60
Approx. 15.5 kg
Approx. 13.5 kg
Approx. 16.0 kg
Approx. 15.0 kg
Supplied accessories:
AM loop antenna (1)
FM lead antenna (1)
Speaker cords (2)
Speaker pads (8)
Remote commander (1)
Batteries (2)
Design and specifications are subject to change
without notice.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|