2-691-651-13(2)
SXRD Projection TV
GB
Operating Instructions
Before operating the TV, please read the “Safety
information” section of this manual.
Retain this manual for future reference.
KS-70R200A
KS-60R200A
KS-50R200A
© 2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Overview of the TV buttons and indicators........................................................................14
Picture menu...........................................................................................................................21
AV Setup menu.......................................................................................................................30
GB
Specifications..........................................................................................................................42
GB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Start-up Guide
Carrying your TV
KS-60R200A/50R200A
Carrying the TV requires at least two people.
When moving the TV, place one hand in the hole on
the lower portion of the TV while supporting the top
with the other hand, as shown in the illustration below.
1: Installing the TV
Recommended viewing area
Your viewing position may affect the picture quality.
For the best picture quality, install your TV within the
areas shown below.
\
Model
Viewing distance
KS-70R200A
min. 2.4 m
KS-60R200A
KS-50R200A
min. 2.2 m
min. 2.0 m
KS-70R200A
Horizontal Viewing Area
Carrying the TV requires at least three people. Do not
hold by the pedestal or the speakers of the TV. Doing
so may cause these parts to break off.
When moving the TV, one person should lift the back,
and the other two people should lift the front and
sides. Support the TV by placing your hands in the
holes on the lower part of the TV set, and then lift
carefully.
Vertical Viewing Area
Notes
•
Do not hold by the pedestal or the front panel of the TV.
Doing so may cause these parts to break off.
Do not grasp the
pedestal or the front
panel of the TV.
•
•
To ensure the safety of children and the TV, keep children
away from the TV during installation. Climbing on or pushing
the TV or its stand may cause it to fall and damage the TV.
When installing your TV against a wall, keep your TV at
least 10 cm away from the wall to provide proper
ventilation.
GB
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing the TV from toppling over
Installing the TV against a wall
Keep the TV at least 10 cm away from the wall to
provide proper ventilation.
KS-60R200A/50R200A
Blocking the ventilation opening of the cooling fan
may damage the TV.
Allow this much space
10 cm
SU-GW12
30 cm
10 cm
10 cm
KS-70R200A
Never install the TV as follows
Air circulation is
blocked.
Warm air is blown to
ventilation openings.
SU-RS51U
Note
Do not install the TV near any ventilation, as it may affect the
normal TV operating temperature.
Note
When using the SU-GW12 stand (for KS-60R200A/
50R200A, not supplied) or SU-RS51U stand (for KS-
70R200A, not supplied) for your TV, you must use the
support belt.
GB
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2: Connecting an
3: Inserting batteries
antenna/VCR
into the remote
Push and slide to open.
Connecting an antenna only
Antenna cable (not supplied)
Notes
•
•
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix old
and new batteries.
•
Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of the battery.
Please consult your local authority.
AC power cord (supplied)
•
•
Handle the remote control with care. Do not drop or step
on it, or spill liquid of any kind onto it.
Do not place the remote control in a location near a heat
source, or in a place subject to direct sunlight, or in a damp
room.
Connecting an antenna and VCR
AC power
cord
(supplied)
Antenna cable
(not supplied)
A/V cable
(not supplied)
S video cable
(not supplied)
VCR
GB
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press F/f to select the language
displayed on the menu screens, then press
.
4: Selecting the
language
The message confirming the TV start auto-tuning
appears on the screen, then go to “5: Auto tuning
, 1
2
2
3
3
1 Connect the TV to your AC power outlet
(110-240 V AC, 50/60 Hz).
2 Press 1 on the TV (front).
When you switch on the TV for the first time, the
Language menu appears on the screen.
When the TV is in standby mode (the 1 (on/
standby) indicator on the TV (front) is red), press
TV "/1 on the remote to switch on the TV.
GB
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press MENU to exit.
The TV has now tuned in all the available channels.
5: Auto tuning the TV
The TV will search for and store all available TV
channels.
6 PressG/g to select the desired setting in
“Display this menu next time ?” dialog, then
press
to exit.
Tip
If “Yes” is selected and the TV is switched off by pressing 1
on the TV, or is disconnected from the AC power outlet, the
auto startup procedure restarts the next time the TV is
switched on.
1,4,6
1,4,6
3,5
1 Press G/g to select “OK”, then press
.
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No channels were found. Check the antenna
connection and press G/g to select “Yes”, then
press
to start auto-tuning again.
2 When the Program Sorting menu appears
on the screen, follow the steps of “Program
If you do not change the order in which the channels
are stored on the TV, go to step 3.
3 Press MENU to display the Clock Set
menu.
4 Press F/f/G/g to set the day and time
(hour and minute), then press
.
GB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Use the TV at temperatures between 5ºC and 35ºC.
If the TV is transported directly from a cold to a warm
location, or if the room temperature has changed
suddenly, the picture may be blurred or show poor color.
This is because moisture has condensed on the mirror or
lenses inside. If this happens, let the moisture evaporate
before using the TV.
Safety information
To prevent fire or shock hazard, do not expose the TV to rain
or moisture.
Dangerously high voltages are present inside the TV. Do not
open the cabinet. Refer servicing to qualified personnel only.
•
•
Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
For general safety
•
Do not expose the TV to rain or
moisture.
Do not place the set on an unstable cart, stand, table or
shelf. The set may fall, causing serious injury to a child or
an adult and serious damage to the set. Use only a stand
recommended by the manufacturer for the specific model
of TV. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
•
•
Do not open the rear cover.
This set should be operated only
from the type of power source indicated on the serial/
model plate.
If you are not sure of the type of electrical power supplied
to your home, consult your dealer or local power
company.
For safe installation
•
Never cover the slots and openings
with a cloth or other materials.
•
•
When the set exhibits a distinct change in performance, it
indicates a need for service.
The TV should be installed near an easily accessible
power outlet.
•
•
Do not block the ventilation openings.
Do not use power-line operated sets near water — for
example, near a bathtub, washbowl, kitchen sink,
swimming pool, etc.
For safe operations
•
Do not operate the TV on anything but 110-240 V AC,
50/60 Hz.
•
Do not operate the TV if any liquid
or solid object falls in it — have it
checked immediately.
•
Do not install the TV in hot, humid or excessively dusty
places.
•
•
Never push objects of any kind
into the set through the cabinet
slots as they may touch
dangerous voltage points or
short out parts that could result
in a fire or electric shock.
Never spill liquid of any kind on the set.
Leave enough space between the TV or furniture and an
outlet so that you can plug in/out easily.
•
•
Do not allow anything to rest
on or roll over the power
cord, and do not place the set
where the power cord is
subject to wear or abuse.
Do not install the TV where
it may be exposed to
mechanical vibrations.
Continued
GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Unplug the AC power cord
during lightning storm.
Carry the TV in the specified manner
If you carry the TV in a manner other than the specified
manner and without the specified number of persons, it may
drop and a serious injury may be caused. Be sure to follow
the instructions mentioned below.
•
Carry the TV with the specified
number of persons (page 4).
Do not keep the TV plugged
in if you are not going to use it
for several days. Even if your
TV is turned off, it is still
connected to AC power when
plugged into an outlet.
•
•
•
Do not carry the TV holding the speaker grill.
Hold the TV tightly when carrying it.
Before carrying the TV, disconnect any accessories or
cables.
•
•
Do not pull the power cord to
disconnect the TV. Pull it out
by the plug.
•
Do not carry the TV holding the
screen edges.
Do not plug in too many
appliances to the same power
jack. Do not damage the power
cord.
Caution
Do not use the TV at altitudes higher than 3,000 m, as doing
so might cause malfunctions.
Cleaning
Clean the rear cover area of the TV regularly. Dust in rear
cover area may cause a problem with the cooling system of
the TV.
•
Do not place any objects on
the TV. The apparatus shall
not be exposed to dripping or
splashing and that no objects
filled with liquids, such as
vases, shall be placed on the
apparatus.
•
To remove hard contamination, use a cloth moistened with
a solution of mild detergent and water. Do not use a spray
cleaning solution directly to the TV. It should only be used
to moisten the cleaning cloth.
•
Clean the cabinet of the TV
with a dry soft cloth. To remove
dust from the screen, wipe it
gently with a soft cloth.
Stubborn stains may be
•
•
To prevent fire, keep
inflammable objects or naked
lights (e.g. candles) away from the TV.
If a snapping or popping sound from a TV set is
continuous or frequent while the TV is operating, unplug
the TV and consult your dealer or service technician. It is
normal for some TV sets to make occasional snapping or
popping sounds, particularly when being turned on or off.
Give careful consideration to the environment when
disposing of batteries.
Do not unplug or switch off the AC power outlet directly
when the TV is on.
Always switch off by pressing “1” on the remote or the
TV first to ensure proper lamp cooling process.
removed with a cloth slightly
dampened with a solution of mild soap and warm water.
Never use strong solvents such as thinner or benzine for
cleaning. If picture brightness decreases over time, it may
be necessary to clean the inside of the TV. Consult
qualified service personnel.
Unplug the AC power cord when cleaning this unit. If not,
it may result in electric shock.
Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ball point pen or a screw
driver. This type of contact may result in a scratched
screen.
•
•
•
•
•
When not in use
•
If you will not be using the TV set for several days, the TV
set should be disconnected from the mains for
environmental and safety reasons.
The TV set is not disconnected from the mains when the
TV set is switched off.
To disconnect the TV set completely, pull the plug from
the outlet. However, some TV sets may have features
which need the TV set to be left in standby to work
correctly. The instructions in this manual will inform you
if this applies.
Attachments
Do not use attachments not
recommended by the manufacturer,
as they may cause hazards.
•
•
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
About the TV
•
Although the TV is made with high-precision technology,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the screen. This is a
structural property of the panel and is not a malfunction.
When High contrast non-moving images such as station
logos and channel numbers are displayed for a long period
of time, there may be some image retention on the screen.
This is only a temporary condition. Turning off the power
for a while or letting the TV run on another channel will
eliminate the retained image.
•
•
If direct sunlight or other strong illumination shines on the
screen, part of the screen may appear white due to
reflections from behind the screen. This is a structural
property of the TV.
Do not expose the screen to direct illumination or sunlight.
About the AC power cord
The shape of AC plug varies, depending on the regions.
AC power outlet
The TV set with a three-wire grounding type AC power plug
must be connected to an AC power outlet with a protective
earthing connection.
Projection lamp
•
Your TV uses a projection lamp as its light source. It is
time to replace the lamp with a new one when:
– the message, “Projection lamp is nearing end of life.
Please replace the lamp.” appeared on the screen,
– the lamp indicator on the front blinks in red,
– screen images become dark,
– no image appears on the display after prolonged use.
In rare instances, the bulb may pop inside the lamp unit,
but the lamp unit is designed to contain all of broken glass
pieces inside the lamp unit. (See “Replacing the lamp” on
page 39.)
•
•
When the lamp eventually burns out, you may hear a
noticeable pop sound. This is normal and is inherent in this
type of lamp.
The projection lamp contains mercury and should be
disposed of properly. Consult your local authorities
regarding safe disposal. If the lamp is broken during use,
a small amount of mercury may be released. In this
situation, move away from the product and ventilate the
area. In case of accidental contact or inhalation, or if you
feel unwell, consult a physician promptly.
Cooling fan
This TV uses a cooling fan. You may hear some fan noise
(depending on the placement of the TV), which may be more
noticeable during the night, or when ambient noise is
particularly low.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other
European countries with separate collection
systems)
This symbol is on the remote control.
GB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the remote
1 TV "/1 – TV standby
Switches off the TV temporarily and on from standby mode.
2 Number buttons
• In TV mode: Selects channels. For channel numbers 10 and above, enter
the second digit within two seconds.
• In Text mode: Enters the three digit page number to select the page.
3
– Previous channel
Returns to the previous channel watched (for more than five seconds).
4
5
– Wide Mode (page 17)
– Picture freeze (page 17)
Freezes the TV picture.
6
/
– Info / Text reveal
• In TV mode: Displays information such as current channel number and
screen mode.
quiz).
Enables you to access various viewing options and change/make adjustments
according to the source and screen mode.
0 PROG +/-/
/
• In TV mode: Selects the next (+) or previous (-) channel.
• In Text mode: Selects the next (
qs 2 +/- – Volume
) or previous ( ) page.
qd RETURN
Returns to the previous screen of any displayed menu.
qf
This button does not work with this model.
qh
Exits Text mode, or returns to TV mode.
qj
Displays two pictures simultaneously.
ql – Input select / Text hold
/
to the TV jacks.
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
wa "/1
Switches on or off the optional equipment selected from the function buttons.
ws Function buttons
Enables you to operate the corresponding equipment. For details, see
wd DVD/VCR operating buttons
• . : Replays the current program from the previous chapter mark (if
any).
• > : Advances forward to the next chapter mark (if any).
•
•
: Replays the current program for a set period of time.
: Advances forward a set period of time.
• m : Plays a program in fast reverse mode.
• M : Plays a program in fast forward mode.
• H : Plays a program at a normal speed.
• X : Pauses playback.
• x : Stops the playback.
• VISUAL SEARCH : Only for Sony DVD recorders with the visual search
function. For details, see the operating instructions supplied with the DVD
recorder.
wf DVD/VCR record buttons
• z REC: Starts recording.
• X REC PAUSE: Pauses the recording.
• x REC STOP: Stops the recording.
X REC PAUSE and x REC STOP are available only on DVD recorders.
wg F1/F2
• Selects a disc when using a DVD changer.
• Selects a function when using a combination unit (e.g. a DVD/VCR).
For details, see the operating instructions supplied with the DVD changer or
combination unit.
wh DVD MENU
Displays the DVD disc menu.
wj DVD TOP MENU
Displays the top menu of the DVD disc.
Tips
•
The number 5, H, PROG + and A/B buttons have tactile dots. Use the tactile dots
as references when operating the TV.
•
When using the remote, aim it at the remote control sensor on the TV. See page 14
for the location of the sensor.
GB
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the TV buttons and indicators
1 PROG +/-/
/
• In TV mode: Selects the next (+) or previous
(-) channel.
• In TV menu: Moves through the options up
(
) or down ( ).
2 2 +/-/
/
• In TV mode: Increases (+) or decreases (-) the
volume.
• In TV menu: Moves through the options right
(
) or left ( ).
3
4
/
– Input select/OK
source from equipment connected to the TV
jacks.
• In TV menu: Selects the menu or option, and
confirms the setting.
5 1 – On/standby indicator
Flashes in green when the light source is
preparing to turn on. Lights up in green when the
TV is switched on.
Lights up in red when the TV is in standby mode.
If the lamp cover or the lamp itself is not securely
attached, the red indicator will continue to flash
6
7
– Timer indicator
Lights up in orange when the timer is set
– Lamp indicator
Flashes in red when the lamp for the light source
has burned out.
8 Remote control sensor
• Receives IR signals from the remote.
• Do not put anything over the sensor, as its
function may be affected.
KS-60R200A/50R200A
KS-70R200A
9 1 – Power
Switches the TV on or off.
Note
Make sure that the TV is completely switched off before
unplugging the AC power cord. Unplugging the AC
power cord while the TV is turned on may cause the
indicator to remain lit or may cause the TV to
malfunction.
GB
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection lamp
2 Attach the side cover that came in the box.
Your TV uses a projection lamp as its light source. As with
any lamp, it has lifespan and needs to be replaced when the
lamp indicator flashes or the screen becomes darker.
Press the cover at the top, middle, and bottom to
make sure that it is attached securely (see
illustration).
Notes
Note
•
After switching on your TV, it may take a while (1 minute
or less) before the picture appears.
Facing the TV, make sure that the side covers marked
“R” (right) and “L”(left) are attached to the
corresponding sides of the TV.
•
When the projection lamp wears out, the screen goes dark.
Replace the lamp with a new Sony XL-5100 replacement
lamp (for KS-60R200A/50R200A, not supplied) or XL-
5300 replacemant lamp (for KS-70R200A, supplied).
How to replace the lamp, see page 39.
Warning
The light emitted from the lamp is quite bright when your TV
is in use. To avoid eye discomfort or injury, do not look into
the light housing when the power is on.
To detach the speakers
(KS-70R200A only)
The speakers on the KS-70R200A can be detached if
required. If you use a multi-channel surround speaker
system and there is insufficient space to install the
display unit, we recommend using the speakers
detached.
1 Remove the three screws that are located
on the rear of the speaker, and pull the
speaker straight out to detach it from the
panel.
3 Tighten the side cover with the three
screws that you removed in step 1.
When attaching the screws, use a coin to turn them
clockwise.
When removing the screws, use a coin to turn
them counterclockwise.
4 Repeat steps 1 through 3 with the speaker
on the other side.
Note
After you remove the speakers, place them in the box that
originally contained the side cover.
GB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
2 Press the number buttons or PROG +/- to
Watching TV
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second digit within two
seconds.
Additional operations
To
Do this
Switch off the TV
temporarily
Press TV "/1.
(standby mode)
Switch off the TV
Switch on the TV
Press 1 on the TV (front).
1
Press %. Press 2 +/- to adjust
without sound from the volume.
standby mode
Adjust the volume
Press 2 + (increase)/
- (decrease).
Mute the sound
Press %. Press again to restore.
To access Text
Press /. Each time you press /, the display changes
cyclically as follows:
2
Text and TV picture t Text t No Text (exit the
Text service)
To select a page, press the number buttons or
To hold a page, press
To reveal hidden information, press
/
.
/
.
/
.
To jump a page, press
three digit pages).
and F/f, then press
(for
Tips
•
•
•
Ensure that the TV is receiving a good signal, or some text
errors may occur.
For information on the use of a service, select the index
page.
When four colored items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding colored
button to access the page.
2
1 Press 1 on the TV (front) to switch on the
TV.
When the TV is in standby mode (the 1 (on/
standby) indicator on the TV (front) is red), press
TV "/1 on the remote to switch on the TV.
GB
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
To freeze the picture – Picture freeze
You can freeze the current picture to make a note of a
telephone number or recipe.
•
•
•
Alternatively, you can set “Auto Wide” to “On”. The TV
will automatically select the best mode to suit the input
from external equipment (page 26).
In Zoom, you can adjust the picture position (e.g. to read
subtitles) using the Vertical Shift option selected from
Tools menu (see below).
1 Press
.
The frozen picture is displayed on the right of the
screen. You can watch moving picture on the left.
“Full 1”, “Full 2” and “Normal” are available for “Wide
2 Press
mode.
again to return to normal TV
To use the Tools menu
Press TOOLS to display the following options when
viewing a TV program.
To change the Wide Mode
Press
repeatedly to select Wide Zoom, Normal,
Full or Zoom.
Options
Description
Close
Closes the Tools menu.
Wide Zoom*
Twin Picture
See below.
(or Single Picture)
Picture Mode
Sound Mode
Power Saving
Vertical Shift
Vertical Size
Sleep Timer
Enlarges the center portion of the picture. The left and
right edges of the picture are stretched to fill the 16:9
screen.
Normal
To view two pictures simultaneously – Twin
Picture
You can view two pictures on the screen
simultaneously.
Displays the 4:3 picture in its original size. Side bars
are shown to fill the 16:9 screen.
Full
Note
This function is not available for a PC input source.
Press
. Two pictures are displayed simultaneously.
Stretches the 4:3 picture horizontally, to fill the 16:9
screen.
Zoom*
Displays cinemascopic (letter box format) broadcasts
in the correct proportions.
* Parts of the top and bottom of the picture may be cut off.
Continued
GB
17
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Do this
Viewing pictures from
connected equipment
Switch the active
screen (the frame of
the selected screen
turns green)
Press G/g.
Change the program Press PROG +/-.
on the active screen
Switch on the connected equipment, then
press
/
repeatedly until the correct
input symbol (see below) appears on the
screen. For details of connecting the other
equipment, see page 35.
Change the program Press F/f.
on the inactive
screen
Change the input
source
1 Select the active screen.
2 Press repeatedly.
On screen
display
Labels of input jacks
/
Change the size of
the pictures
Press and hold G/g.
Video 1 or
Video 1
1
or
, and
L (MONO), R
Return to normal TV Press
mode
.
Video 2 or
Video 2
2
and
or (Y, PB/CB, PR/CR),
L (MONO), R
*
Tips
Video 3
3
and L (MONO), R
•
•
You can select the same program for both screens.
Pictures input through the HDMI and component jacks are
not displayed on the right screen.
HD/DVD 1
HD/DVD 2
1 Y, P B/CB, PR/CR and
L, R
2 Y, PB/CB, PR/CR and
•
You can also use the Twin Picture feature by selecting
“Twin Picture” from the Tools menu, and return to normal
TV mode by selecting “Single Picture” from the Tools
menu.
L, R
HDMI 1
HDMI 2
1 HDMI IN
2 HDMI IN
2 HDMI IN and 2 HDMI IN
L, R
PC
PC IN
RGB and PC IN
*
Located on the front
To return to normal TV mode, press
.
GB
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment other
than a PC.
Options
Description
Close
Closes the Tools menu.
Twin Picture
(or Single Picture)
Picture Mode
Sound Mode
Power Saving
Vertical Shift
Vertical Size
Sleep Timer
GB
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using MENU Functions
Icon
Description
Navigating through
menus
“MENU” allows you to enjoy various convenient
features of this TV. You can easily select channels or
inputs sources and change the settings for your TV.
Program List
Displays available TV channels.
• To watch the desired channel, select
the channel, then press
.
• To assign a label to a channel, select
“Edit Program Labels”, then see
External Inputs
Selects equipment connected to your TV.
• To watch the desired external input,
select the input source, then press
• To assign a label to an external input,
select “Edit Video Labels”, then see
.
Settings
Displays the Settings menu where most
of the advanced settings and adjustments
are performed.
2
3
Note
The options you can adjust vary depending
on the situation. Unavailable options are
grayed out or not displayed.
1
2 Press F/f to select an option.
3 Press to confirm a selected option.
To exit the menu, press MENU.
1 Press MENU to display the menu.
GB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
You can select the options listed below on the Picture
menu.
1 Press F/f to select “Settings” on MENU,
then press
.
2 Press F/f to select a menu icon, then
press
.
3 Press F/f/G/g to select an option.
For the input currently being viewed, select whether to use the common setting or to
set each item separately.
Target Inputs
“Common”: Applies common settings whose adjustments are shared with other
inputs in which “Target Inputs” is set to “Common”.
Current input name (e.g. Video 1): Allows you to set each option separately for the
current input.
Tip
Set each input to “Common” if you require the same settings to apply to each input.
Selects the picture mode.
Picture Mode
Reset
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Custom”: Allows you to store your preferred settings.
Resets all the “Picture” settings except “Target Inputs” and “Picture Mode” to the
factory settings.
Tip
items in “Advanced Settings”.
By selecting the iris option, you can obtain the best brightness and contrast suited for
your TV viewing.
Advanced Iris
“Auto 1”*: Recommended option for viewing programs that have larger variation in
brightness from scene to scene.
“Auto 2”*: Recommended option for viewing programs that have less variation in
brightness from scene to scene.
“Max”: With this option, the screen has maximum level of brightness. It is suitable
for TV viewing in a brightly lit room.
“High”: With this option, the screen becomes bright. It is suitable for TV viewing in
a brightly lit room.
“Medium”: With this option, the brightness is about the standard level.
“Low”: With this option, the screen brightness dims and increases in contrast. It is
suitable for TV viewing in a room with low lighting.
“Min”: With this option, the screen is dimmed but contrast is at a maximum. It is
suitable for TV viewing in a room with low lighting.
* Automatically detects the brightness of the screen. These options are best suited for programs
such as movies that often change between bright scenes and low light setting scenes.
Note
This function is not available in twin picture or picture freeze mode.
Continued
GB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Increases or decreases picture contrast.
Brightens or darkens the picture.
Picture
Brightness
Color
Increases or decreases color intensity.
Increases or decreases the green tones and red tones.
Tip
Hue
“Hue” can only be adjusted for an NTSC color signal (e.g. U.S.A. video tapes).
Adjusts the whiteness of the picture.
Color Temperature
“Cool”: Gives the white colors a blue tint.
“Neutral”: Gives the white colors a neutral tint.
“Warm 1”/“Warm 2”: Gives the white colors a red tint. “Warm 2” gives a redder tint
than “Warm 1”.
Tip
“Warm 1” and “Warm 2” can only be selected when you set “Picture Mode” to “Custom”.
Sharpens or softens the picture.
Sharpness
Reduces the picture noise (snowy picture).
“Auto”: Automatically reduces the picture noise.
Noise Reduction
“High”/“Medium”/“Low”: Modifies the effect of the noise reduction.
“Off”: Turns off the Noise Reduction feature.
“BNR”: Reduces the block picture noise. This is effective for a connected DVD
player/digital receiver with MPEG playback.
Tips
•
•
“Auto” is not available when watching component or HDMI inputs.
“Noise Reduction” is not available when using Freeze or Twin Picture features.
Creates a high-resolution for high density source (i.e. DVD player, satellite
receiver).
DRC Mode
“Mode 1”: Recommended mode
“Mode 2”: Only available when input signal format is 1080i. Mode 2 is suitable
setting if original signal content is based on standard definition signal.
“Off”: Select to turn off DRC Mode.
Tip
“DRC Mode” is not available when “Game Mode” is set to “On” or when using Freeze or Twin
Picture features; also not available when watching PC or 1080p sources.
GB
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizes the level of detail (“Reality”) and smoothness (“Clarity”) for each input
signal. For example, you can create a custom setting for your cable input’s picture,
and create another for your DVD player’s picture.
DRC Palette
The DRC palette appears.
Press F/f/G/g to adjust the position of the marker (z).
As you move the z higher along the “Reality” axis, the picture becomes more
detailed. As you move the z to the right along the “Clarity” axis, the picture
becomes smoother.
Tip
“DRC Palette” is not available when “Game Mode” is set to “On”, “DRC Mode” is set to “Off”
or when using Freeze or Twin Picture features; also not available when watching PC or 1080p
sources.
Customizes the Picture function in more detail. When you set “Picture Mode” to
“Custom”, you can set/change these settings.
Advanced Settings
“Reset”: Resets all the advanced settings to the factory settings.
“Black Corrector”: Enhances black areas of the picture for stronger contrast.
“Gamma”: Adjusts the balance between bright and dark areas of the picture.
“Clear White”: Emphasizes white colors.
“Live Color”: Makes colors more vivid.
“White Balance”: Adjusts the color temperature color by color.
“Detail Enhancer”: Enhances the details of the picture.
“Edge Enhancer”: Enhances the outline of the picture.
Tip
“Detail Enhancer” is not available when using Freeze or Twin Picture features.
GB
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound menu
You can select the options listed below on the Sound
menu. To select options in “Settings”, refer to “Picture
For the input currently being viewed, select whether to use the common setting or to
set each item separately.
Target Inputs
“Common”: Applies common settings whose adjustments are shared with other
inputs in which “Target Inputs” is set to “Common”.
Current input name (e.g. Video 1): Allows you to set each option separately for the
current input.
Tip
Set each input to “Common” if you require the same settings to apply to each input.
Selects the sound mode.
“Dynamic”: Enhances treble and bass.
“Standard”: For standard sound. Recommended for home entertainment.
“Custom”: Flat response. Also allows you to store your preferred settings.
Sound Mode
Reset
Resets all the “Sound” settings except “Target Inputs”, “Sound Mode” and “Dual
Sound” to the factory settings.
Adjusts higher-pitched sounds.
Treble
Adjusts lower-pitched sounds.
Bass
Emphasizes left or right speaker balance.
Balance
Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend
to be louder than programs).
Intelligent Volume
Adjusts the volume level of the current input relative to other inputs, when “Target
Inputs” is set to the current input name (e.g. Video 1).
Volume Offset
Surround
Selects the surround mode.
“Dolby Virtual”: Uses the TV speakers to simulate the surround effect produced by
a multi channel system.
“Simulated Stereo”: Adds a surround-like effect to mono programs.
“Off”: For normal stereo or mono reception.
Gives sound more impact by compensating for phase effects in speakers using the
“BBE High Definition Sound System”, when “Sound Mode” is set to “Custom”.
To reproduce sounds with impact, select “High” (more impact) or “Low” (less
impact). Otherwise select “Off”.
BBE
GB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Dual Sound
Broadcasting
Selection
NICAM stereo
Stereo (stereo sound)
Mono (regular sound)
NICAM bilingual
Main (main sound)
Sub (sub sound)
Mono (regular sound)
NICAM monaural
Main (main sound)
Mono (regular sound)
A2 (German) stereo
A2 (German) bilingual
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
Notes
•
•
If the signal is very weak, the sound becomes monaural automatically.
If the stereo sound is noisy when receiving a NICAM program, select “Mono”. The sound
becomes monaural, but the noise is reduced.
•
•
The Dual Sound setting is memorized for each program position.
You cannot receive a stereo broadcast signal when “Mono” is selected for the program
position.
•
You cannot receive stereo or dual sound when “Low” or “High” is selected in “Audio Filter”
Tips
•
•
•
NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
Malaysia, Thailand, etc.
A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand,
etc.
If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “Main” or
“Sub”.
Tip
Sound menu options other than “Dual Sound” cannot be used for headphones and audio output jacks.
GB
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen menu
You can select the options listed below on the Screen
menu. To select options in “Settings”, refer to “Picture
For the input currently being viewed, select whether to use the common setting or to
set each item separately.
Target Inputs
“Common”: Applies common settings whose adjustments are shared with other
inputs in which “Target Inputs” is set to “Common”.
Current input name (e.g. Video 1): Allows you to set each option separately for the
current input.
Tip
Set each input to “Common” if you require the same settings to apply to each input.
For details about “Wide Mode”, see “To change the Wide Mode” (page 17).
Wide Mode
Auto Wide
Automatically changes “Wide Mode” according to the input signal from external
equipment. To keep your setting, select “Off”.
Tip
Even if “Auto Wide” is set to “On” or “Off”, you can always modify the format of the screen
by pressing
repeatedly.
Selects the default screen mode for use with 4:3 sources.
“Wide Zoom”: Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original
image as much as possible.
4:3 Default
“Normal”: Displays conventional 4:3 sources in the correct proportions.
“Off”: Keeps the current “Wide Mode” setting when the channel or input is changed.
Tip
This option is available only if “Auto Wide” is set to “On”.
Adjusts the screen area displaying the picture.
“Normal”: Displays the picture in the original size.
“-1”/“-2”: Enlarges the picture to hide the edge of the picture.
Display Area
Adjusts the horizontal position of the picture.
Horizontal Shift
GB
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
You can select the options listed below on the Setup
menu. To select options in “Settings”, refer to “Picture
Sets the timer to switch on/off the TV.
Timer Settings
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
up in orange.
(Timer) indicator on the TV (front) lights
Tips
•
•
If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
“TV will soon turn off by Sleep Timer” appears on the screen one minute before the TV
switches to standby mode.
On Timer
Sets the timer to switch on the TV from standby mode.
“Day”: Selects the day on which you want to activate the On Timer.
“Time”: Sets the time to switch on the TV.
“Duration”: Selects the time period after which the TV automatically switches to
standby mode again.
“Volume Setup”: Sets the volume for when the timer switches on the TV.
When the On Timer is activated, the
in orange.
(Timer) indicator on the TV (front) lights up
Clock Set
Allows you to adjust the clock.
Starts the “first time operation menu” to select the language, tune in all available
channels, and set the time. Usually, you do not need to do this operation because the
language will have been selected and channels already tuned when the TV was first
retune the TV after moving house, or to search for new channels that have been
launched by broadcasters).
Auto Startup
Selects the power saving mode to reduce the power consumption of the TV.
Power Saving
GB
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Provides smoother picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
Cinema Drive
“Auto 1”: For a stable picture with minimal noise. Set to “Auto 2” if the screen is
partially degraded.
“Auto 2”: Use this setting for standard use.
“Off”: Turns off the “Cinema Drive” feature.
Notes
•
Even if “Auto 1” or “Auto 2” is selected, “Cinema Drive” will be automatically turned off
and a moving image will not be played smoothly if the image contains irregular signals or
too much noise.
•
“Cinema Drive” is not available when using Freeze or Twin Picture features, or when
watching PC, 480p, 576p, 720p, 1080i or 1080p sources.
Switches on/off the TV’s internal speakers.
“On”: The TV speakers are turned on in order to listen to the TV’s sound through the
TV speakers.
Speaker
“Off”: The TV speakers are turned off in order to listen to the TV’s sound only
through your external audio equipment connected to the audio output jacks.
“Variable”: The audio output from your audio system can be controlled by the TV’s
remote.
Audio Out
“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume
control to adjust the volume (and other audio settings) through your audio system.
Select “High” to use the TV at an altitude of 1,500 m or higher, or to use the TV in
certain circumstances where there is a considerable rise in temperature inside the
TV. Select “Normal” to use the TV at normal altitudes.
Cooling Mode
When the lamp nears the end of its life, a message appears every time you switch on
the TV. After you replace the lamp, select this option and follow the on-screen
procedure.
Lamp Replacement
Notes
•
•
Select this option after you replace the lamp.
Depending on environmental and other conditions, such as frequency of use, some lamps
may burn out before the lamp replacement message appears on the screen.
Until you set the Lamp Replacement option, a message announcing that the lamp is at the
end of its life will appear every time you switch on the TV.
•
Adjust the horizontal/vertical position of the picture including menu displays and
messages, etc. on the TV screen.
Display Position
Selects the language in which the menus are displayed.
Displays your TV’s product information.
Language
Product Information
All Reset
Resets all settings to the factory settings and then displays the Auto Startup screen.
Note
All settings, including language, auto tuned channels, etc. will be reset. There may be cases in
which resetting takes a long time.
GB
29
Download from Www.Somanuals.com. All Manuals Search And Download.
AV Setup menu
You can select the options listed below on the AV
Setup menu. To select options in “Settings”, refer to
Assigns a name to any equipment connected to the front and rear jacks. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
Video Labels
1
2
Press F/f to select the desired input source, then press
.
Press F/f to select the desired option below, then press
.
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
“Skip”: Skips an unnecessary input source.
Selects the input signal from S video jack
connected.
“On”: Switches automatically between the S video jack and the composite video
jacks on the rear of the TV depending on the cable connection.
1 when
/
1 jacks are both
Video1 Auto S Video
Video2 Input
“Off”: Activates the composite video jacks on the rear of the TV.
“Auto”: Switches automatically between the component video jacks and the
composite video jacks on the front of the TV depending on the cable connection.
“Component”: Activates the component video jacks on the front of the TV.
“Composite”: Activates the composite video jacks on the front of the TV.
Tip
When multiple cables are connected and “Auto” is selected, “Component”,
“Composite” will be activated in that order.
Selects the color system (“Auto”, “PAL”, “SECAM”, “NTSC3.58” or “NTSC4.43”)
according to the input signal from the input source.
Color System
Game Mode
Color Matrix
Depending on the game software, reaction times may slow during fast-moving
scenes, etc. Select “On” to improve the reaction times.
Usually used in the factory setting (Video1/2 (Composite and S video input signal)
/3 is set to “ITU601”, and Video 2 (Component input signal)/HD/DVD 1/2/HDMI
1/2 is set to “Auto”). If the tone of the picture from the input source is unnatural,
select either “ITU601” or “ITU709”, which normalizes the tone.
GB
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Setup menu
You can select the options listed below on the Channel
Setup menu. To select options in “Settings”, refer to
When “1 Digit Direct” is set to “On”, you can select a channel using one preset
number button (0 - 9) on the remote.
Note
When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering
two digits using the remote.
1 Digit Direct
Auto Tuning
Tunes in all the available channels.
Usually you do not need to do this operation because the channels are already tuned
the process (e.g. to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Changes the order in which the channels are stored on the TV.
Program Sorting
Program Labels
1
Press F/f to select the channel you want to move to a new position,
then press
Press F/f to select the new position for your channel, then press
.
2
.
Assigns a channel name of your choice up to five letters or numbers. The name will
be displayed briefly on the screen when the channel is selected.
1
2
Press F/f to select the channel you want to name, then press
.
Press F/f to select the desired letter or number (“_” for a blank space),
then press g.
If you input a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
To delete all the characters
Select “Reset”, then press
Select “OK”, then press
.
3
4
.
Blocks an individual channel from being watched.
Program Block
1
2
Press F/f to select the channel you want to block, then press
Press F/f to select “Block”, then press
.
.
To watch the channel, select “Allow”.
Continued
GB
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”, press PROG +/- to select
the program number with the channel. You cannot select a program number that is
set to skip.
Manual Program
Preset
Program/TV System
Presets program channels manually.
1
2
Press F/f to select “Program”, then press
.
Press F/f to select the program number you want to manually tune (if
tuning a VCR, select channel 00), then press
.
3
4
Press F/f to select “TV System”, then press
.
Press F/fto select the best received TV broadcast systems, then press
.
5
6
Press F/f to select “VHF Low”, “VHF High” or “UHF”, then press
.
Press G/g until the desired channel’s broadcast appears on the TV
screen, then press
.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
This name will be displayed briefly on the screen when the channel is selected.
AFT
Allows you to fine-tune the selected program number manually if you feel that a
slight tuning adjustment will improve the picture quality.
You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the
fine tuning is performed automatically.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono programs.
If you do not experience any sound distortion, we recommend that you leave this
option set to the factory setting “Off”.
Note
You cannot receive stereo or dual sound when “Low” or “High” is selected. Normally noise
can be reduced with “Low”. If you still feel the sound is noisy, set the filter to “High”.
Skip
Skips unused channels when you press PROG +/- to select channels. (You can still
select a skipped channel using the number buttons.)
Sensitivity
Adjusts the TV reception sensitivity if the TV signal is too strong and the picture is
distorted. Press f to select “Low”, then press
.
Color System
Selects the color system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or
“NTSC4.43”) according to the channel.
GB
32
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Settings menu
You can select the options listed below on the PC
Settings menu when the TV is connected to a PC.
1 Press
/
repeatedly until
PC
appears on the screen.
2 Press MENU to display the PC settings
menu.
Note
When you connect a PC to your TV for the first time,
you may need to adjust the screen display. In such cases,
perform “Auto Adjustment” or adjust the “Phase”,
“Pitch”, “Horizontal Shift”, or “Vertical Shift” in
Picture
Selects the display mode.
“Video”: Select to view video images.
Display Mode
“Text”: Select to view text, charts or tables.
Resets all the “Picture” settings except “Display Mode” to the factory settings.
Reset
By selecting the iris option, you can obtain the best brightness and contrast suited for
your TV viewing.
Advanced Iris
“Auto 1”*: Recommended option for viewing programs that have larger variation in
brightness from scene to scene.
“Auto 2”*: Recommended option for viewing programs that have less variation in
brightness from scene to scene.
“Max”: With this option, the screen has maximum level of brightness. It is suitable
for TV viewing in a brightly lit room.
“High”: With this option, the screen becomes bright. It is suitable for TV viewing in
a brightly lit room.
“Medium”: With this option, the brightness is about the standard level.
“Low”: With this option, the screen brightness dims and increases in contrast. It is
suitable for TV viewing in a room with low lighting.
“Min”: With this option, the screen is dimmed but contrast is at a maximum. It is
suitable for TV viewing in a room with low lighting.
* Automatically detects the brightness of the screen. These options are best suited for programs
such as movies that often change between bright scenes and low light setting scenes.
Note
You cannot select “Auto 1” or “Auto 2” when “Display Mode” is set to “Text”.
Increases or decreases picture contrast.
Brightens or darkens the picture.
Picture
Brightness
Continued
GB
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusts the whiteness of the picture.
Color Temperature
“Cool”: Gives the white colors a blue tint.
“Neutral”: Gives the white colors a neutral tint.
“Warm 1”/“Warm 2”: Gives the white colors a red tint. “Warm 2” gives a redder tint
than “Warm 1”.
Sound
Selects the sound mode.
“Dynamic”: Enhances treble and bass.
Sound Mode
“Standard”: For standard sound. Recommended for home entertainment.
“Custom”: Provides a flat response. Sound quality as customized on the connected
PC is maintained in the TV sound.
Others
Automatically adjusts the display position, phase and pitch of the picture when the
TV receives an input signal from a connected PC.
Auto Adjustment
Tip
Auto Adjustment may not work well with some input signals. In such cases, manually adjust
“Phase”, “Pitch”, “Horizontal Shift” and “Vertical Shift”.
Resets all the “Others” settings to the factory settings.
Adjusts the phase when the screen flickers.
Reset
Phase
Adjusts the pitch when the picture has unwanted vertical stripes.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.
Pitch
Horizontal Shift
Vertical Shift
Wide Mode
Selects the screen mode for signals with a 60 Hz vertical frequency.
“Normal”: Displays the picture in its original size.
“Full 1”: Enlarges the picture to fill the display area, keeping its original horizontal-
to-vertical aspect ratio.
“Full 2 ”: Enlarges the picture to fill the display area.
GB
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Equipment
Connecting optional equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (front)
To connect
Do this
S VHS/Hi8/DVC
Connect to the video jack
2,
camcorder A
and the audio jacks
connect mono equipment, connect
2. If you
to the L jack
2.
Tip
You can select the input signal by
setting “Video2 Input” in the “AV
Headphones B
Connect to the i jack to listen to
sound from the TV on headphones.
S VHS/Hi8/DVC
camcorder
HDV camcorder
with component
output C
Connect to the component Y, PB/
CB, PR/CR jacks
L (MONO), R jacks
2 and audio
2.
Push up to open the
front panel using the
small lip on the panel.
Tip
You can select the input signal by
setting “Video2 Input” in the “AV
Headphones
HDV camcorder
with component output
Continued
GB
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the TV (rear)
For service use only
Digital receiver/
DVD player
Video game equipment
DVD player
DVD player with
component output
PC
Hi-Fi audio equipment
DVD player
VCR
DVD recorder
VCR
GB
36
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect
Do this
Programing the remote
Digital receiver or Connect to the HDMI IN 1 or 2
DVD player D
jack if the equipment has an
If you have Sony VCRs/DVDs and Sony DVD Home
Theater Systems/Amplifiers, do the following
procedure to program the remote so that you can
operate them using this remote.
HDMI jack. The digital video and
audio signals are input from the
equipment. If the equipment has a
DVI jack, connect the DVI jack to
the HDMI IN 2 jack through a DVI
- HDMI adaptor interface (not
supplied), and connect the
Note
Before you start, look up the three-digit code for your
equipment’s audio out jacks to the
audio in the HDMI IN 2 jacks.
Notes
•
The HDMI jacks only support the
following video inputs: 480i,
480p, 576i, 576p, 720p, 1080i and
1080p. To connect a PC, use the
PC IN jacks.
1
2
•
Be sure to use only an HDMI cable
that bears the HDMI logo.
Video game
equipment, DVD
player or VCR
EI
Connect to the S video jack
1
or the video jack
the audio jacks
1 or 3, and
1 or 3. To
avoid picture noise, do not connect
the camcorder to the video jack
1 and the S video jack
at the same time. If you connect
mono equipment, connect to the L
(MONO) jack 1 or 3.
1
1
3
DVD player with
component output and the audio jacks
Connect to the component jacks
1 or
/
F
2.
Hi-Fi audio
equipment G
Connect to the audio output jacks
to listen to the sound from the
TV on Hi-Fi audio equipment.
To turn off the sound of the TV
speakers, set “Speaker” to “Off”
1 Press and hold the DVD, VCR or AMP
function button you want to program on the
remote, then press
, keeping the
function button pressed down.
The selected function button (DVD, VCR or
AMP) will flash.
DVD recorder or
VCR H
Connect to the video output jacks
to record the image from the
TV. Connect to the audio output
2 Press the number buttons to enter the
three-digit code while the button is lit. If
code is not entered within 10 seconds, you
must perform the step 1 again.
jacks
to record the sound from
the TV on the DVD recorder or
VCR.
3 Press
.
PC J
Connect to the PC IN jacks. It is
recommended to use a PC cable
with ferrites.
When the programing is correct, the selected
function button will flash twice, and when not, it
will flash five times.
Continued
GB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Switch on your equipment and check that
the following main functions work.
H(playback), x (stop), m (rewind), M (fast
forward), channel selection for both VCR and
DVDs, TOP MENU/MENU and F/f/G/gonly
for DVDs.
If your equipment is not working, or some of the
functions do not work
Enter the correct code or try the next code listed.
To return to normal TV operation
Press the TV function button.
Equipment’s codes
Equipment Code
VCR
001*, 002, 003, 004
DVD
101*, 151, 201, 202, 203
Amplifier
* Factory setting
301, 302, 303, 304, 401*, 402, 403, 451
GB
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
3 Take the new lamp out of its package.
Replacing the lamp
Do not touch the glass portion of the new
The Projection lamp, like all lamps, will eventually
lose brightness and functionality which affects the
overall performance of your TV. How long the Lamp
maintains its brightness will vary depending upon
your usage and environmental conditions. To
lamp.
Notes
•
Do not shake the lamp. Vibration can damage the
lamp or shorten its life.
•
Avoid touching the front glass of a new lamp or the
glass of the lamp receptacle. This may reduce picture
quality or lamp life.
maintain the quality of your viewing experience, Sony
recommends that you replace the Lamp (1) when the
screen becomes dark or the color looks unusual; (2)
4 Remove the outside lamp cover.
For KS-60R200A/50R200A, turn the screw
with a screwdriver counterclockwise and
remove the cover.
when
on the front of the TV flashes; (3) after
approximately 8,000 hours of use (for KS-60R200A/
50R200A) or 4,000 hours of use (for KS-70R200A);
or (4) when the lamp replacement message appears on
the TV screen.
For KS-70R200A, release the clamp and
remove the cover.
WARNING
KS-60R200A/50R200A
Electric appliances can cause fire or high temperature,
resulting in injury or death. Be sure to follow the
instructions below.
•
Use a Sony XL-5100 replacement lamp (for KS-
60R200A/50R200A, not supplied) or XL-5300
replacemant lamp (for KS-70R200A, supplied) for
replacement. Use of any other lamp may damage the TV.
Do not remove the lamp for any purpose other than
replacement. Doing so may cause injury or fire.
Do not put flammable materials and metal objects inside
the lamp receptacle of the TV after removing the lamp.
Doing so may cause fire or electrical shock. Do not touch
the lamp receptacle once the lamp has been removed.
When the lamp eventually burns out, you may hear a
noticeable “pop” sound. This is normal and it is inherent
to this type of lamp.
In rare instances, the bulb may pop inside the lamp unit,
but the lamp unit is designed to contain all of the broken
glass pieces inside the lamp unit.
This TV’s lamp contains mercury and should be disposed
of properly. Consult your local authorities regarding safe
disposal. The material contained in this lamp are similar to
those of a fluorescent lamp, so you should dispose of it in
the same way.
•
•
KS-70R200A
•
•
•
5 Remove the lamp door. (For KS-70R200A)
Turn the screw counterclockwise, and then
turn the knob to the left until the marks on
the lid and the case line up. Remove the
door.
1 Switch off the TV. Wait several minutes,
then unplug the power cord.
(The cooling fan will continue to operate for
about two minutes after switching the TV
off.)
KS-70R200A
2 Wait at least 30 minutes after unplugging
the power cord to allow the lamp to cool
down before replacing it. To avoid being
burned, do not touch the lamp receptacle
once the lamp has been removed.
Continued
GB
39
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Pull out the lamp.
8 Put the new lamp into its place.
For KS-60R200A/50R200A, slide it in
slowly by pressing the PUSH part of the
front corners of the lamp until it stops with
a firm clicking sound to lock.
For KS-60R200A/50R200A, place your
index finger through the hoop of the lamp
handle and pull it upwards, while placing
your thumb on the dent on the top. Then
pull the lamp out.
For KS-70R200A, make sure the lamp is
securely mounted into the compartment.
For KS-70R200A, hold the indents on the
top and bottom of the lamp, and pull the
lamp straight out.
KS-60R200A/50R200A
KS-60R200A/50R200A
PUSH
PUSH
KS-70R200A
KS-70R200A
Hold this part of the lamp
Notes
Notes
•
•
The lamp compartment is tilted.
•
The lamp is very hot after use. Never touch the glass
portion of the lamp or the non-designated surrounding
parts.
To ensure the lamp is securely installed, press the area
marked PUSH before closing the lamp cover.
If the lamp is not securely reattached, the self-
diagnostic function may be triggered and 1flashes in
•
•
After the used lamp has cooled, place it into the empty
box of the replacement lamp. Never put the used lamp
into a plastic bag.
KS-60R200A/50R200A
KS-70R200A
7 Place the new lamp halfway in. (For
KS-60R200A/50R200A)
Follow the gutter in the housing to mount
the new lamp securely.
KS-60R200A/50R200A
Hold this part of the lamp
GB
40
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Reattach the lamp door. (For
KS-70R200A)
11Turn on the TV and set the Lamp
Replacement option in the Setup menu
(page 29). This setting is necessary to
inform you when the next lamp
replacement is needed.
Turn the knob to the right while pushing the
door in, until the marks on the lid and the
case line up. Then turn the screw clockwise
to secure the door.
Notes
•
•
•
Until you set the Lamp Replacement option, a
message announcing that the lamp is at the end of its
life will appear every time you switch on the TV.
Consult your Sony dealer for a Sony XL-5100
replacement lamp (for KS-60R200A/50R200A) or
XL-5300 replacement lamp (for KS-70R200A).
Take great care when replacing the lamp or plugging
in/unplugging the connecting cords. Rough handling
may cause the TV to fall, damaging the TV, the TV
stand and the floor.
KS-70R200A
10Place the outside lamp cover back in its
place.
For KS-60R200A/50R200A, turn the screw
with a screwdriver clockwise and secure
the cover.
For KS-70R200A, replace the cover,
inserting it from the left side. Press the
clamp on the right side to secure the cover.
KS-60R200A/50R200A
KS-70R200A
GB
41
Download from Www.Somanuals.com. All Manuals Search And Download.
D/K
M
VHF: C1 to C12, R1 to R12 / UHF: C13 to C57,
R21 to R60 /
CATV: S01 to S03, S1 to S41, Z1 to Z39
Specifications
Display Unit
VHF: A2 to A13 / UHF: A14 to A79 /
CATV: A-8 to A-2, A to W+4, W+6 to W+84
Power Requirements:
110–240 V AC, 50/60 Hz
Projection System:
Terminals
1, 2
3 SXRD Panel, 1 lens projection system
SXRD Panel:
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
1
S video input (4-pin mini DIN)
1, 2, 3
Size 0.61 inch SXRD panel
Resolution 1920 × 1080 pixels
Projection Lenses:
High performance, large-diameter hybrid lens F2.5
Lamp:
KS-70R200A:
Video input (phono jack)
1, 2, 3
Audio input (phono jacks)
500 mVrms
Ultra high pressure lamp, 180 W, XL-5300
KS-60R200A/50R200A:
Ultra high pressure lamp, 120 W, XL-5100
Screen Size:
Impedance: 47 kilohms
HDMI IN 1, 2
KS-70R200A: 70 inches
KS-60R200A: 60 inches
KS-50R200A: 50 inches
Power Consumption:
KS-70R200A: 290 W
KS-60R200A: 225 W
KS-50R200A: 225 W
Standby Power Consumption:
0.5 W
Video: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analog audio (phono jacks):
500 mVrms, Impedance 47 kilohms
(HDMI IN 2 only)
Video output (phono jack)
Audio output (phono jacks)
Dimensions (w × h × d):
KS-70R200A:
PC IN
RGB
PC Input (D-sub 15-pin) (see page 43)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
HD: 1-5 Vp-p
Approx. 1,885 × 1,154 × 611 mm (with speakers)
Approx. 1,714 × 1,154 × 611 mm (without speakers)
KS-60R200A:
Approx. 1,674 × 1,009 × 514 mm
KS-50R200A:
VD: 1-5 Vp-p
PC IN
Approx. 1,453 × 863 × 478 mm
Weight:
PC audio input (minijack)
Headphones jack
KS-70R200A:
i
Approx. 73 kg
KS-60R200A:
Approx. 51 kg
KS-50R200A:
Sound Output
15 W + 15 W
Optional Accessories
Approx. 43 kg
•
TV stand:
TV System
SU-GW12 (for KS-60R200A/50R200A)
SU-RS51U (for KS-70R200A)
Lamp:
XL-5100 (for KS-60R200A/50R200A)
XL-5300 (for KS-70R200A)
B/G, I, D/K, M
Color/Video System
PAL, SECAM, NTSC 3.58, NTSC 4.43 (only Video In)
•
Antenna
75 ohm external terminal
Design and specifications are subject to change
without notice.
Channel Coverage
B/G
VHF: E2 to E12 / UHF: E21 to E69 /
CATV: S01 to S03, S1 to S41
VHF: 0 to 12, 5A, 9A / UHF: 28 to 69 /
CATV: S01 to S03, S1 to S41(Australia only)
VHF: 1 to 11 / UHF: 21 to 69 /
CATV: S01 to S03, S1 to S41(New Zealand only)
I
UHF: B21 to B68 / CATV: S01 to S03, S1 to S41
GB
42
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Input Signal Reference Chart
Horizontal
frequency
(kHz)
Vertical
frequency (Hz)
Signals Horizontal (Pixel) Vertical (Line)
Standard
VGA
640
640
480
480
400
600
600
768
768
768
720
768
768
768
768
1024
1024
1080
31.5
37.5
31.5
37.9
46.9
48.4
56.5
60
60
75
79
60
75
60
70
75
60
60
60
75
60
60
75
60
VGA
VESA
720
VGA-T
SVGA
XGA
800
VESA Guidelines
VESA
800
1024
1024
1024
1280
1280
1280
1280
1360
1280
1280
1920
VESA Guidelines
VESA
VESA
44.7
47.4
47.8
60.3
47.7
64
VESA CVT
VESA
WXGA
VESA
VESA
VESA
SXGA
HDTV
VESA
80
VESA
67.5
EIA
•
•
•
This TV’s PC input does not support Sync on Green or Composite Sync.
The PC input signal displays on-screen in a smaller size than the actual TV screen size and does not support interlaced signals.
For the best picture quality, it is recommended to use the boldfaced signals in the above chart with a 60 Hz vertical frequency
from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically.
GB
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check whether the 1 (on/standby) indicator is flashing in red.
When it is flashing
The self-diagnosis function is activated. (When the indicator flashes two or three times, see page 46.)
1
Count how many 1 (on/standby) indicator flashes between each two second break.
For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.
2
Press 1 on the TV (front) to switch it off, disconnect the AC power cord, and inform your dealer or
Sony service center of how the indicator flashes (number of flashes).
When it is not flashing
1
2
Check the items in the tables below.
If the problem still persists, have your TV serviced by qualified service personnel.
Picture
Problem
Cause/Remedy
No picture (screen is dark) and
no sound
• Check the antenna connection.
• Connect the TV to the AC power outlet, and press 1 on the TV (front).
• If the 1 (on/standby) indicator lights up in red, press TV "/1.
No picture or no menu
information from equipment
connected to the video input
jack
• Check that the optional equipment is on and press
the correct input symbol is displayed on the screen.
• Check the connection between the optional equipment and the TV.
/
repeatedly until
Double images or ghosting
• Check antenna/cable connections.
• Check the antenna location and direction.
Only snow and noise appear
on the screen
• Check if the antenna is broken or bent.
• Check if the antenna has reached the end of its serviceable life (three to five
years in normal use, one to two years at the seaside).
Distorted picture (dotted lines
or stripes)
• Keep the TV away from electrical noise sources such as cars, motorcycles,
hair-dryers or optical equipment.
• When installing optional equipment, leave some space between the optional
equipment and the TV.
• Make sure that the antenna is connected using the antenna cable.
• Keep the antenna cable away from other connecting cables.
Picture noise when viewing a
TV channel
• Select “Manual Program Preset” in the “Channel Setup” menu and adjust
“AFT” (Automatic Fine Tuning) to obtain better picture reception
Some tiny black points and/or
bright points appear on the
screen
• The picture of a display unit is composed of pixels. Tiny black points and/or
bright points (pixels) on the screen do not indicate a malfunction.
No color on programs
• Select “Reset” in the “Picture” menu to return to the factory settings
No color or irregular color
• Check the connection of the Y, PB/CB, PR/CR jacks
1 or 2.
when viewing a signal from the
• Make sure that the Y, PB/CB, PR/CR jacks
their respective jacks.
1 or 2 are firmly seated in
Y, PB/CB, PR/CR jacks
2
1 or
GB
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause/Remedy
Picture flashes initially when
changing to HDMI mode or
when switching on the TV in
HDMI mode
• This is probably caused by the authentication process between HDMI
equipment and the TV. It does not indicate a malfunction.
A white oval image appears on
the screen
• This is due to strong light reflecting off both the TV screen and reflections
coming from behind the screens.
• Position your TV away from strong ambient light or sunlight, or lower any
ambient lights.
Sound
Problem
Cause/Remedy
No sound, but good picture
• Press 2 +/– or % (Mute).
Noisy sound
Channels
Problem
Cause/Remedy
Some channels are blank
• Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Contact the broadcaster for transmission details.
• Check that the “Program Block” is set to “Allow” in the “Channel Setup”
General
Problem
Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of
• If the inside of the TV grows warm while Cooling Mode is set to “High”,
the TV automatically switches to standby mode.
(When Cooling Mode is set to “Normal” under the same conditions, the
mode switches to “High”, the cooling fan starts, and a loud whirring noise
may be heard.)
The TV turns on automatically
Some input sources cannot be
selected
• Select “Video Labels” in the “AV Setup” menu and cancel “Skip” of the
Uneven color uniformity
appears on the screen when
the TV is powered on
• After turning on the TV, you may notice a slight variation in color (tint) and
brightness in certain areas of the picture. This will last only a few minutes
each time you turn on the TV. This is a normal temperature characteristic of
the components and not a malfunction.
Continued
GB
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause/Remedy
The remote does not function
• Check that the remote is set correctly for the equipment you are using.
• Check whether the equipment you want to use corresponds to the function
• If the remote does not operate the equipment even when the remote has been
set correctly to the equipment, enter the necessary code as explained in
• Replace the batteries.
indicator flashes in red
• After waiting several minutes, try switching the TV on by pressing "/1 on
the remote or 1 on the TV.
The TV does not switch on
• The TV cools down its projection lamp after being switched off. It takes up
to two minutes for the picture to come back after the TV is switched on
again. Wait for a while until the picture returns.
• If the high temperature warning message appears, switch off the TV and
wait until the TV’s projection lamp cools down (approximately 5 minutes).
If the remote control still does not work, make sure to dust the ventilation
slots on the rear of the TV and the cooling fan to provide adequate
ventilation around the TV.
Cannot play shooting games
• Some shooting games that involve pointing a light beam at the TV screen
with an electronic gun or rifle cannot be used with your TV. For details, see
the instruction manual supplied with the video game software.
On/standby indicator flashes in
intervals of some blinks at a
time
• Three blinks: The lamp cover or the lamp itself is not securely attached.
• Two blinks: If there is a considerable rise in temperature inside the TV such
as when any ventilation openings are blocked.
• Other: Consult your dealer or service.
A slight creaking noise occurs
from the bottom part of the TV
• Advanced Iris applies a mechanical iris system. When Advanced Iris is
turned On/Off, a natural creaking noise occurs due to the basic structure of
the optical unit. The creaking sound is an inherent nature of this system and
is not a defect.
High temperature warning
message appears
• This message will appear when there is a rise in temperature inside the TV.
Make sure to remove dust from the ventilation slots on the rear and both
sides of the TV. In addition, make sure that there are no obstacles in front of
the ventilation slots. If no blockage is found, you may need to set Cooling
Mode to “High”, otherwise the TV will turn off. With Cooling Mode set to
“High”, if the message reappears and the TV turns off again, the TV may
need servicing. Call your local Sony service center.
GB
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Sleep Timer 28
Sound menu 24
Speaker 29
Specifications 42
Surround 24
Numerics
H
1 Digit Direct 31
4:3 Default 26
Headphones 35
Hue 22
A
I
Advanced Settings 23
AFT 32
All Reset 29
Antenna, connecting 6
Audio Filter 32
Intelligent Volume 24
T
L
Target Inputs
Label 32
Lamp
picture 21
screen 26
sound 24
replacing 39
Audio Out 29
Lamp Replacement 29
Live Color 23
Text 16
Auto Adjustment 34
Auto Startup 28
Auto Wide 26
Timer Settings 28
Treble 24
TV System 32
Twin Picture 17
AV Setup menu 30
M
Manual Program Preset 32
MENU 20
B
Balance 24
Bass 24
BBE 24
Black Corrector 23
C
Channel Setup menu 31
Channels
V
VCR
N
Noise Reduction 22
Normal 17
connecting 6
Vertical Size 27
Video Labels 30
Video1 Auto S Video 30
Video2 Input 30
Volume Offset 24
O
On Timer 28
P
auto-tuning 8
selecting 16
Skip 32
PC Settings menu 33
Phase 34
W
Picture Freeze 17
Cinema Drive 29
Clear White 23
Clock Set 28
Wide Zoom 17
Picture menu 21
Picture Mode 21
Pitch 34
Z
Color 22
Zoom 17
Color Matrix 30
Connecting
an antenna/VCR 6
optional equipment 35
Cooling Mode 29
Power Saving 28
Product Information 29
Program Block 31
Program Labels 31
Program Sorting 31
R
D
Remote control
inserting batteries 6
overview 12
programing 37
sensor 14
Display Area 26
Display Mode 33
Display Position 29
DRC Mode 22
DRC Palette 23
Dual Sound 25
Reset
PC settings 34
sound 24
E
Equipment labels 30
F
S
Fastext 16
Screen menu 26
Sensitivity 32
Setup menu 28
Sharpness 22
Full 17
G
Game Mode 30
Gamma 23
GB
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed on 100% recycled paper.
2691651130
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|