Sony Laptop PCG F160 User Manual
®
VAIO Notebook Computer  
User Guide  
PCG-F150/PCG-F160/PCG-F180/PCG-F190  
®
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
AVERTISSEMENT  
❏
❏
Pour prévenir tout risque d’incendie  
ou d’électrocution, garder cet appareil  
à l’abri de la pluie et de l’humidité.  
Pour prévenir tout risque  
d’électrocution, ne pas ouvir le châssis  
de cet appareil et ne confier son  
entretien qu’à une personne qualifiée.  
L’appareil doit être le plus près  
possible d’une prise murale pour en  
faciliter l’accès.  
Owner’s Record  
The model number and serial number are  
located on the bottom of your Sony VAIO  
Notebook Computer. Record the serial  
number in the space provided here. Refer  
to the model and serial number when you  
call your Sony Service Center.  
❏
Model Number: PCG-F150/ PCG-F160/  
PCG-F180/ PCG-F190  
Serial Number:________________________  
Regulatory Information  
WARNING  
Declaration of Conformity  
❏
❏
To prevent fire or shock hazard, do  
not expose your notebook computer  
to rain or moisture.  
To avoid electrical shock, do not open  
the cabinet. Refer servicing to  
qualified personnel only.  
Trade Name: SONY  
Model No: PCG-F150/ PCG-F160/  
PCG-F180/ PCG-F190  
Responsible Party:  
Sony Electronics Inc.  
❏
❏
Never install modem or telephone  
wiring during a lightning storm.  
Never install telephone jacks in wet  
locations unless the jack is specifically  
designed for wet locations.  
Never touch uninsulated telephone  
wire or terminals unless the telephone  
line has been disconnected at the  
network interface.  
Use caution when installing or  
modifying telephone lines.  
Avoid using the modem during an  
electrical storm.  
Address:  
1 Sony Drive  
Park Ridge, NJ 07656  
❏
Telephone No.: 201-930-6970  
This device complies with Part 15 of  
the FCC rules. Operation is subject  
to the following two conditions: (1)  
This device may not cause harmful  
interference, and (2) this device  
must accept any interference  
❏
❏
❏
received, including any interference  
that may cause undesired operation.  
Do not use the modem or a telephone  
to report a gas leak in the vicinity of  
the leak.  
This equipment has been tested and found  
to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the  
Rules. These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses, and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful  
❏
A socket outlet should be as close as  
possible to the unit and easily  
accessible.  
! The laser beam used in the DVD-  
ROM drive unit is harmful to the  
eyes. Do not attempt to  
disassemble the cabinet. Refer  
servicing to qualified personnel  
only.  
interference to radio communications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the user  
is encouraged to try to correct the  
interference by one or more of the  
following measures:  
The REN is used to determine the quantity  
of devices which may be connected to the  
telephone line. Excessive RENs on the  
telephone line may result in the devices not  
ringing in response to an incoming call. In  
most, but not all areas, the sum of the RENs  
should not exceed five (5.0). To be certain of  
the number of devices that may be  
connected to the line, as determined by the  
total RENs, contact the telephone company  
to determine the maximum REN for the  
calling area.  
❏
❏
❏
Reorient or relocate the receiving  
antenna.  
Increase the separation between the  
equipment and the receiver.  
Connect the equipment into an outlet  
on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced  
radio/ TV technician for help.  
If the terminal equipment (Notebook  
Computer PCG-F150/ PCG-F160/  
PCG-F180/ PCG-F190) causes harm to the  
telephone network, the telephone company  
will notify you in advance that temporary  
discontinuance of service may be required.  
But if advance notice is not practical, the  
telephone company will notify the  
customer as soon as possible. Also, you  
will be advised of your right to file a  
complaint with the FCC if you believe it is  
necessary.  
❏
You are cautioned that any changes or  
modifications not expressly approved in  
this manual could void your authority to  
operate this equipment.  
Only peripherals (computer input/ output  
devices, terminals, printers, etc.) that  
comply with FCC Class B limits may be  
attached to this computer product.  
Operation with non-compliant peripherals  
is likely to result in interference to radio  
and television reception.  
The telephone company may make  
changes in its facilities, equipment,  
operations or procedures that could affect  
the operations of the equipment. If this  
happens, the telephone company will  
provide advance notice in order for you to  
make the necessary modifications in order  
to maintain uninterrupted service.  
All cables used to connect peripherals must  
be shielded and grounded. Operation with  
cables, connected to peripherals, that are  
not shielded and grounded, may result in  
interference to radio and television  
reception.  
If trouble is experienced with this  
equipment (Notebook Computer  
PCG-F150/ PCG-F160/ PCG-F180/  
PCG-F190), please contact 1-888-4SONYPC  
(1-888-476-6972), or write to the Sony  
Customer Information Center, One Sony  
Drive, Park Ridge, NJ 07656 for repair and/ or  
warranty information. If the trouble is  
causing harm to the telephone network, the  
telephone company may request that you  
remove the equipment from the network  
until the problem is resolved.  
FCC Part 68  
This equipment complies with Part 68 of  
the FCC rules. On the bottom of this  
equipment is a label that contains, among  
other information, the FCC equivalence  
number (REN) for this equipment. If  
requested, this information must be  
provided to the telephone company.  
Repair of this equipment should be made  
only by a Sony Service Center or Sony  
authorized agent. For the Sony Service  
This modem uses the USOC RJ-11  
telephone jack.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Center nearest you, call 1-888-4SONYPC  
(1-888-476-6972).  
Cet àppareil numérique de la classe B est  
conforme à la norme NMB-003 du Canada.  
This equipment cannot be used on public  
coin service provided by the telephone  
company. Connection to Party Line Service  
is subject to state and possible provincial  
tariffs. (Contact the state or provincial  
utility service commission, public service  
commission or corporation commission for  
information.)  
DISPOSAL OF LITHIUM ION  
BATTERY  
You can return your unwanted lithium ion  
batteries to your nearest Sony Service  
Center or Factory Service Center.  
✍ In some areas the disposal of lithium ion  
batteries in household or business trash  
may be prohibited.  
Telephone Consumer  
Protection Act of 1991  
(United States)  
For the Sony Service Center nearest you  
call 1-888-476-6972 in the United States or  
The Telephone Consumer Protection Act of  
1991 makes it unlawful for any person to  
use a computer or other electronic device to  
send any message via a telephone facsimile  
machine unless such message clearly  
contains, in a margin at the top or bottom  
of each transmitted page or on the first  
page of the transmission, the date and time  
it is sent and an identification of the  
1-800-961-7669 in Canada.  
! Do not handle damaged or leaking  
lithium ion batteries.  
! Ne pas manipuler les batteries au  
lithium-ion qui fuient ou sont  
endommagées.  
business, other entity, or individual  
sending the message, and the telephone  
number of the sending machine or such  
business, other entity, or individual.  
! Danger of explosion if battery is  
incorrectly replaced. Replace only  
with the same or equivalent type  
recommended by the  
In order to program this information into  
your facsimile machine, see your fax  
software documentation.  
manufacturer. Discard used  
batteries according to the  
manufacturer’s instructions.  
Telephone Consumer  
Guidelines (Canada)  
! Une batterie non conforme  
présente un danger d'explosion. La  
remplacer seulement par une  
batterie identique ou de type  
équivalent recommandé par le  
fabricant. Évacuer les batteries  
usées selon les directives du  
fabricant.  
Please refer to your telephone directory  
under ‘Privacy Issues’ and/ or ‘Terms of  
Service.’ For more detailed information  
please contact:  
CRTC  
Terrasses de la Chaudiére, Tour centrale  
1 promenade du Portage, 5 étage Hull PQ  
K1A 0N2.  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
telecommunications company cause to  
request that the user disconnect the  
equipment.  
! The battery pack used in this  
device may present a fire or  
chemical burn hazard if mistreated.  
Do not disassemble, heat above  
212°F (100°C) or incinerate.  
Users should ensure for their own  
protection that the electrical ground  
connections of the power utility, telephone  
lines and internal metallic water pipe  
system, if present, are connected together.  
This precaution may be particularly  
important in rural areas.  
Dispose of used battery promptly.  
Keep away from children.  
! La manutention incorrecte du  
module de batterie de cet appareil  
présente un risque d'incendie ou  
de brûlures chimiques. Ne pas  
démonter, incinérer ou exposer à  
une température de plus de 100°C.  
Évacuer promptement la batterie  
usée. Garder hors de portée des  
enfants.  
Caution: Users should not attempt to make  
such connections themselves, but should  
contact the appropriate electric inspection  
authority, or electrician, as appropriate.  
NOTICE: The Ringer Equivalence Number  
(REN) assigned to each terminal device  
provides an indication of the maximum  
number of terminals allowed to be  
connected to a telephone interface. The  
termination on an interface may consist of  
any combination of devices subject only to  
the requirement that the sum of the Ringer  
Equivalence Numbers of all the devices  
does not exceed 5. The Ringer Equivalence  
Number for this equipment is 0.4.  
INDUSTRY CANADA NOTICE  
NOTICE: The Industry Canada label  
identifies certified equipment. This  
certification means that the equipment  
meets certain telecommunications network  
protective, operational and safety  
requirements as prescribed in the  
appropriate Terminal Equipment Technical  
Requirements document(s). The  
Department does not guarantee the  
equipment will operate to the user ’s  
satisfaction.  
AVIS DE L’INDUSTRIE  
CANADA  
AVIS: L’étiquette d’Industrie Canada  
identifie le matériel homologué.  
Before installing this equipment, users  
should ensure that it is permissible to be  
connected to the facilities of the local  
telecommunications company. The  
equipment must also be installed using an  
acceptable method of connection.  
Cette étiquette certifie que le matériel est  
conforme aux normes de protection,  
d’exploitation et de sécurité des réseaux de  
télécommunications, comme le prescrivent  
les documents concernant les exigences  
techniques relatives au matériel terminal.  
Le Ministère n’assure toutefois pas que le  
matériel fonctionnera à la satisfaction de  
l’utilisateur.  
The customer should be aware that  
compliance with the above conditions may  
not prevent degradation of service in some  
situations.  
Avant d’installer ce matériel, l’utilisateur  
doit s’assurer qu’il est permis de le  
Repairs to certified equipment should be  
coordinated by a representative designated  
by the supplier. Equipment malfunctions  
or any repairs or alterations made by the  
user to this equipment may give the  
raccorder aux installations de l’entreprise  
locale de télécommunication. Le matériel  
doit également être installé en suivant une  
méthode acceptée de raccordement.  
L’abonné ne doit pas oublier qu’il est  
Download from Www.Somanuals.com. All Manuals Search And Download.  
possible que la conformité aux conditions  
énoncées ci-dessus n’empêche pas la  
dégradation du service dans certaines  
situations.  
Les réparations de matériel homologué  
doivent être coordonnées par un  
représentant désigné par le fournisseur.  
L’entreprise de télécommunications peut  
demander à l’utilisateur de débrancher un  
appareil à la suite de réparations ou de  
modifications effectuées par l’utilisateur ou  
à cause de mauvais fonctionnement.  
Pour sa propre protection, l’utilisateur doit  
s’assurer que tous les fils de mise à la terre  
de la source d’énergie électrique, des lignes  
téléphoniques et des canalisations d’eau  
métalliques, s’il y en a, sont raccordés  
ensemble. Cette précaution est  
particulièrement importante dans les  
régions rurales.  
Avertissement: L’utilisateur ne doit pas  
tenter de faire ces raccordements lui-même;  
il doit avoir recours à un service  
d’inspection des installations électriques,  
ou à un électricien, selon le cas.  
AVIS: L’indice d’équivalence de la sonnerie  
(IES) assigné à chaque dispositif terminal  
indique le nombre maximal de terminaux  
qui peuvent être raccordés à une interface.  
La terminaison d’une interface  
téléphonique peut consister en une  
combination de quelques dispositifs, à la  
seule condition que la somme d’indices  
d’équivalence de la sonnerie de tous les  
dispositifs n’excède pas 5.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Welcome  
Ergonomic Considerations ............................................................. 2  
Using Your Notebook Computer  
Locating the Controls and Connectors ......................................... 5  
Connecting a Power Source ........................................................... 9  
Starting Your Computer ............................................................... 14  
Shutting Down Your Computer .................................................. 15  
®
Registering Windows 98............................................................. 16  
Registering Your Computer ......................................................... 17  
Using the Keyboard ....................................................................... 18  
Using the Touchpad ...................................................................... 24  
Using the Floppy Disk Drive ....................................................... 25  
Using the DVD-ROM/ CD-ROM Drive...................................... 27  
Using PC Cards .............................................................................. 29  
Using Infrared Communication Devices.................................... 32  
Using Power Saving Modes ......................................................... 34  
Using a Second Battery Pack........................................................ 36  
Using the Weight Saver ................................................................ 38  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
VAIO Notebook Computer User Guide  
Connecting Peripheral Devices  
Connecting a Phone Line ..............................................................42  
Connecting the Port Replicator ....................................................43  
Connecting a Printer ......................................................................47  
Connecting an External Display...................................................48  
Connecting an External Mouse or Keyboard .............................51  
Connecting External Speakers......................................................52  
Connecting an External Microphone...........................................53  
Connecting a Digital Still Camera or Other Serial Device .......54  
Connecting a Digital Video Camera Recorder...........................55  
Connecting a Universal Serial Bus (USB) Device ......................56  
Customizing Your Notebook Computer  
Displaying the Sony Notebook Setup Screen.............................57  
Controlling Power Management..................................................59  
Displaying Battery Information ...................................................62  
Selecting the Display Mode ..........................................................65  
Starting Your Favorite Software with Programmable Power  
Key (PPK) Setup .............................................................................69  
Using the Dual Display Function.................................................71  
Getting Help  
Troubleshooting .............................................................................75  
Replacing the Internal Backup Battery........................................82  
Using the System and Application Recovery CDs ....................84  
Notes on Use ...................................................................... 87  
Limited Warranty Statement ............................................ 93  
Index................................................................................... 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Congratulations on your purchase of the Sony VAIO Notebook  
Computer. Sony has combined leading-edge technology in audio, video,  
computing, and communications to provide you with state-of-the-art  
personal computing.  
About the User Guide  
The User Guide offers a quick introduction and reference to your Sony  
Notebook computer.  
❑
❑
❑
❑
❑
Using Your VAIO Notebook Computer shows you how to use the  
standard components of your system.  
Connecting Peripheral Devices explains how you can add  
functionality by connecting various peripherals.  
Getting Help explains the support options available to you and  
offers basic troubleshooting tips.  
Notes on Use provides facts and advice about using your notebook  
computer.  
Limited Warranty Statement provides your product warranty  
statement and explains how to extend your warranty for an  
additional nine months.  
The online User Guide is included with your computer as an electronic  
document. It includes additional information on using the Sony software  
products that are installed on your computer and how to customize your  
Sony notebook computer.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
VAIO Notebook Computer User Guide  
Ergonomic Considerations  
You will be using your notebook computer as a portable device in a  
variety of environments. Whenever possible, you should attempt to  
apply the following ergonomic considerations to both stationary and  
portable environments.  
Computer positioned  
directly in front of you  
Arms at desk  
level  
Wrists relaxed  
and flat  
❑
Position of your computer – Place the computer directly in front of  
you as you work. Keep your forearms horizontal, with your wrists in  
a neutral, comfortable position while using the keyboard, touchpad,  
or external mouse. Let your upper arms hang naturally at your sides.  
Take breaks during sessions with your computer. Excessive use of the  
computer may strain muscles or tendons.  
❑
❑
Furniture and posture – Sit in a chair with good back support and  
armrests. Adjust the level of the chair so your feet are flat on the floor.  
A footrest may make you more comfortable. Sit in a relaxed, upright  
posture and avoid slouching forward or leaning far backward.  
Viewing angle of the computer’s display – Use the display’s tilting  
feature to find the best position. You can reduce eye strain and muscle  
fatigue by adjusting the tilt of the display to the proper position.  
Adjust the brightness setting of the display also.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
3
❑
❑
Lighting – Choose a location where windows and lights do not create  
glare and reflection on the display. Use indirect lighting to avoid  
bright spots on the display. You can also purchase accessories for  
your display that help reduce glare. Proper lighting adds to your  
comfort and work effectiveness.  
Tilt stand – You use the tilt stand to place the computer at an angle  
that allows comfortable typing.  
❑
Placement of an external display – When using an external display,  
set the display at a comfortable viewing distance. Make sure the  
display screen is at eye level or slightly lower when you are sitting in  
front of the monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook  
Computer  
This section describes how to start using your computer and how to use  
your computer’s internal and external devices, such as the touchpad,  
floppy disk drive, and DVD-ROM/ CD-ROM drive.  
Locating the Controls and Connectors  
Front  
1
2
3
4
5
7
8
9
LCD screen (pages 22, 87)  
Speakers (pages 22, 52)  
Keyboard (page 18)  
Battery 1 and 2 indicators (pages 11, 21)  
Hard disk drive indicator (page 21)  
Num Lock indicator (page 21)  
Touchpad (page 24)  
Caps Lock indicator (page 21)  
10  
11  
Left/right buttons (page 24)  
Power indicator (page 11)  
Scroll Lock indicator (page 21)  
6
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
VAIO Notebook Computer User Guide  
Left  
Power switch (page 14)  
1
2
3
4
5
6
7
8
Headphone connector (pages 49, 52)  
S200 i.LINK™ connector (page 55)  
PC card slots (page 29)  
Kensington Security Cable Lock port  
Infrared port connector (page 32)  
Battery bay (page 10)  
Microphone connector (pages 49, 53)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook Computer  
7
Right  
PPK buttons (page 69)  
DVD-ROM/CD-ROM drive (page 27)  
Drive bay (pages 25, 36, 38)  
Internal microphone  
1
2
3
4
Back  
cover  
Phone line jack (page 42)  
Monitor connector (page 48)  
USB connector (page 56)  
DC In connector (page 9)  
1
2
3
4
5
6
7
/
Mouse/Keyboard connector (page 51)  
Serial connector (page 54)  
Printer connector (page 47)  
✍ There is a ventilation slot located between the USB connector and the DC In connector. Do  
not cover the ventilation slot when your computer is on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
VAIO Notebook Computer User Guide  
Bottom  
Port replicator connector cover (pages 44, 46)  
Drive bay RELEASE lever (pages 37, 39)  
Tilt stands  
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook Computer  
9
Connecting a Power Source  
You can use either AC power or a rechargeable battery pack as a power  
source.  
Using the AC Adapter  
1
Plug the cable attached to the AC adapter into the DC In connector on  
the computer.  
2
3
Plug one end of the power cord into the AC adapter.  
Plug the other end of the power cord into an AC outlet.  
Notebook computer  
3
1
AC adapter  
(supplied)  
Power cord (supplied)  
2
DC In  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10 VAIO Notebook Computer User Guide  
Using Battery Power  
You can use one or two battery packs as a source of power. The second  
battery pack inserts into the drive bay on the right side of the computer.  
(See “Using Power Saving Modes” on page 34.) Additional battery packs  
are available as a separate option.  
The battery pack that comes with your computer is not fully charged at  
the time of purchase. Follow the steps below to insert and charge the  
battery pack.  
To insert the battery pack  
1
Open the cover of the battery bay.  
2
Insert the battery pack into the battery bay on the left side of the  
computer.  
Battery pack  
(supplied)  
Label side facing down  
3
Close the cover of the battery bay until it clicks.  
✍ When attaching your computer to the port replicator, do not attempt to insert or remove the  
battery pack. Lifting and turning the computer with an attached docking station could  
cause a temporary loss of power.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
11  
To charge the battery pack  
1
2
Connect the AC adapter to the computer.  
Insert the battery pack.  
The computer automatically charges the battery (the battery indicator  
light flashes in a double blink pattern as the battery charges). When the  
battery is 85 percent full, the battery indicator light turns off. This  
process takes approximately two hours. To charge the battery  
completely, continue charging for an additional hour. See “Displaying  
Detailed Battery Information” on page 63 for information on checking  
the battery life.  
There are two battery indicator lights on the computer:  
Battery indicators  
Secondary battery pack  
(not supplied)  
Battery pack (supplied)  
Battery Indicator  
Meaning  
Indicates the status of the battery pack in the battery bay  
on the left side of the computer.  
1
Indicates the status of the battery pack in the drive bay on  
the right side of the computer.  
2
Battery Indicator  
Light Status  
Meaning  
On  
The computer is using battery power.  
The battery is running out of power.  
The battery is charging.  
Single blink  
Double blink  
Off  
The computer is using AC power.  
✍ To determine the amount of time the battery lasts, see “Displaying Battery Information” on  
page 62.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12 VAIO Notebook Computer User Guide  
When the battery is running out of power, both the battery and power indicators blink.  
When the computer is directly connected to AC power and has a battery pack in the battery  
bay, it uses power from the AC outlet.  
See “Using a Second Battery Pack” on page 36 for information on installing and charging a  
battery pack in the drive bay.  
Keep the battery pack in the computer while it is directly connected to AC power. The  
battery pack continues to charge while you are using the computer.  
If the battery level falls below 10%, you should either attach the AC adapter to recharge the  
battery or shut down your computer and insert a fully charged battery.  
You can extend battery life by changing the power management modes in the PowerPanel  
utility. See “Using Power Saving Modes” on page 34.  
The battery pack supplied with your computer is a lithium ion battery and can be recharged  
at any time. Charging a partially discharged battery does not affect battery life.  
The battery indicator light is on while you use the battery pack as a power source. When  
battery life is nearly depleted, the battery indicator starts flashing.  
For some software applications and some peripheral devices, your computer may not enter  
System Hibernation mode when the battery life is low. To avoid loss of data when using  
battery power, you should save your data frequently and manually activate a power  
management mode, such as System Suspend or System Hibernation.  
To remove the battery pack  
1
2
Open the cover of the battery bay.  
Pull out the battery pack.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook Computer  
13  
3
Close the cover of the battery bay.  
! You may lose data if you remove the battery pack while the computer is on and  
not connected to the AC adapter or if you remove the battery while the  
computer is in System Suspend mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 VAIO Notebook Computer User Guide  
Starting Your Computer  
1
Slide the LCD lock lever in the direction of the arrow, and lift the  
cover.  
LCD lock lever  
2
Slide the power switch on the left side toward the front of the  
computer until the green power indicator light turns on.  
Power switch  
Power indicator  
✍ If you hold the power switch in the On position for more than four seconds, the  
computer turns off.  
3
If necessary, adjust the brightness controls for the LCD display. To  
decrease the brightness, press Fn+F5 and then the down or left arrow  
key. To increase the brightness, press Fn+F5 and then the up or right  
arrow key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
15  
Shutting Down Your Computer  
! To avoid potential loss of data, follow these steps to shut down your computer.  
1
2
Click the Start button on the Windows 98 taskbar.  
Click Shut Down at the bottom of the Start menu to display the Shut  
Down Windows dialog box.  
3
4
Select Shut down.  
Click OK.  
✍ Respond to any prompts warning you to save documents.  
5
6
Wait for your computer to turn off automatically. The power indicator  
(green) turns off.  
Turn off any peripherals connected to your computer.  
✍ If you are unable to shut down your computer using the steps described above, press the  
Ctrl+Alt+Delete keys at the same time to restart the computer. If you are unable to restart  
the computer in this way, you can slide the power switch forward and hold for four seconds.  
This operation may result in data loss.  
During a period of inactivity, you can conserve battery life by using System Suspend mode.  
See “Controlling Power Management” on page 59.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 VAIO Notebook Computer User Guide  
Registering Windows® 98  
The first time you turn on your computer, you need to complete a few  
steps to register and configure the Windows 98 software that is already  
installed.  
✍ You must register Windows 98 before you can use the computer.  
The on-screen instructions guide you through the registration and  
configuration process. The following is an overview of the process.  
1
Gathering information:  
❑
❑
❑
Enter your name.  
Read and accept the License Agreement.  
Enter your Certificate of Authenticity number located on the  
cover of the Microsoft Windows 98 Getting Started manual.  
2
3
Windows 98 setup:  
Click the Finish button on the Windows 98 Setup Wizard screen.  
Selecting your computer settings:  
If necessary, change the Time Zone, Date and Time on the Date/ Time  
Properties screen.  
4
5
Registering your computer:  
For details on registering your computer, see “Registering Your  
Computer” on page 17. You can also sign up for your 100 free hours  
of Internet service at this time.  
Learning about Windows 98:  
If you wish, take the tour of Windows 98.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook Computer  
17  
Registering Your Computer  
You can take advantage of Sony’s commitment to quality customer  
support and receive the following benefits by registering your computer  
with Sony.  
❑
Sony Customer Support – Talk to a Support Representative to  
troubleshoot problems you may be having with your computer.  
❑
Extended Limited Warranty – Protect your investment. Extend your  
Warranty nine months for a total of 12 months from the original date  
of purchase when you register your computer.  
❑
❑
Express service – Provides convenient resolution of problems.  
Free Internet access – Use the Internet for up to 100 free hours when  
you sign up with GTE (no credit card necessary). Free access expires  
100 hours or 60 days after signing up, whichever occurs first.  
If you have not already registered, follow these steps to use your  
notebook computer ’s online registration service.  
✍ You must connect your phone line before using any online services, including the online  
registration service. See “Connecting a Phone Line” on page 42.  
1
2
Click the Sony VAIO Registration icon on the VAIO desktop.  
Enter the information requested on the first online registration form.  
Press the Tab key to move from box to box.  
3
4
Click the Next button to advance to the next form.  
Complete the remaining forms by clicking the Next button each time  
you complete a form.  
The computer automatically transfers your registration information using  
your built-in modem and a toll-free telephone number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18 VAIO Notebook Computer User Guide  
Using the Keyboard  
Your keyboard is very similar to a typewriter ’s, but the keyboard has  
additional keys that perform specific computer-related tasks.  
Correction  
keys  
Escape Key  
Function keys  
Print Screen key  
Shift key  
Ctrl key  
Fn key  
Applications key  
Navigation  
keys  
Alt key  
Numeric keypad area  
Windows 98 key  
Key  
Description  
Numeric keypad  
area  
Contains the keys found on a typical calculator. Use the  
numeric keypad area to type numbers or to perform  
mathematical calculations such as addition and  
subtraction. Note that you must press the Num Lock key  
to activate the numeric keypad. (When you do so, the  
Num Lock light will be on.)  
Navigation keys  
Correction keys  
Function keys  
Several keys are devoted to moving the cursor on the  
screen.  
The Insert, Back Space, and Delete keys enable you to  
make corrections in your documents.  
The twelve function keys along the top of the keyboard  
are used to perform designated tasks. For example, in  
many applications, F1 is the Help key. The task associated  
with each function key may vary from one application to  
the next.  
Escape key  
The Esc (Escape) key is used to cancel commands.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
19  
Key  
Description  
Print Screen key  
The Print Screen key takes an electronic snapshot of the  
screen and places it in the Windows Clipboard. You can  
then paste the screen shot into a document and print it.  
Operator keys  
Several keys are always used with at least one other key:  
Ctrl, Alt, and Shift. When held down with another key,  
the Ctrl (Control) and Alt (Alternate) keys offer another  
way to give commands. For example, in many  
applications, instead of choosing the Save command from  
a menu, you can hold down Ctrl and press S (referred to  
as Ctrl+S). The Shift key operates the same way as on a  
typewriter; it is used to produce capital letters or special  
symbols such as @ and $.  
Windows 98 key  
The key with the Windows logo displays the Windows 98  
Start menu; it is the equivalent of clicking the Start button  
on the taskbar. See “Combinations and Functions with  
the Windows 98 Key” on page 20.  
Fn key  
The Fn key is used in combination with other keys to  
issue commands. See “Combinations and Functions with  
the Fn Key” on page 22.  
Applications key  
The Applications key displays a shortcut menu of  
context-sensitive choices. Pressing this key is the  
equivalent of clicking the right mouse button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 VAIO Notebook Computer User Guide  
Combinations and Functions with the Windows 98 Key  
Combination  
Function  
+ F1  
+ Tab  
+ E  
Displays Windows Help.  
Switches the selected button on the taskbar.  
Displays Windows Explorer.  
+ F  
Displays the Windows Find: All Files window to find  
a file or folder. This is the equivalent of selecting Find  
and then Files or Folders from the Start menu.  
+ Ctrl + F  
Displays the Windows Find: Computer window  
where you can locate other computers. This is the  
equivalent of selecting Find and then Computer from  
the Start menu.  
+ M  
Minimizes all displayed windows.  
Shift +  
+ M  
Returns all minimized windows to their previous  
size.  
+ R  
Displays the Run window. This is the equivalent of  
selecting Run from the Start menu.  
Fn +  
+ Insert  
Displays the Properties window. This is the  
equivalent of double-clicking the System icon in the  
Control Panel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
21  
Indicators  
Indicator  
Function  
Power  
Light is green when the power to the computer is turned  
on. Light is red in System Idle mode, and flashes red in  
System Suspend mode. Turns off when the computer is  
in System Hibernation mode or powered off.  
Battery 1  
Indicates the status of the battery inserted in the battery  
bay on the left side of the computer.  
1
Battery 2  
Indicates the status of the battery inserted in the drive  
bay on the right side of the computer.  
2
Hard disk  
Lights when data is being read from or written to the  
hard drive. Do not enter System Suspend mode or turn  
off the computer when this indicator light is on.  
Light  
On  
Off  
Num Lock  
The number keys in the  
numeric keypad are active.  
The alphanumeric character  
keys in the keypad area are  
active.  
Caps Lock  
Scroll Lock  
The letters appear in  
uppercase as you type. The  
Shift key lowers the case of  
typed letters when Caps  
Lock is on.  
Letters appear in lower case as  
you type (unless you hold  
down the Shift key).  
The screen scrolls differently.  
(Exactly how it scrolls  
Information moves across the  
display normally.  
depends on the specific  
application. It has no effect in  
many applications.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
22 VAIO Notebook Computer User Guide  
Combinations and Functions with the Fn Key  
Combinations/  
Feature  
Function  
Puts the system into System Suspend mode, a power  
management state. To return the system to the active  
state, press any key or press the power switch on your  
computer.  
Fn+  
(ESC)  
System Suspend  
Displays the power source status, as in the example  
below:  
Fn+  
(F2)  
Display power source  
status  
Charging a  
Using AC  
power  
battery pack  
Toggles the built-in speaker off and on.  
Fn+  
(F3)  
Mute On/ Off  
Adjusts the built-in speaker volume.  
To increase volume, press Fn+F4, then  
To decrease volume, press Fn+F4, then  
Fn+ (F4)  
Speaker volume  
or ➜.  
or  
➜
.
Adjusts the brightness of the LCD.  
To increase light intensity, press Fn+F5 and then  
➜.  
Fn+  
(F5)  
or  
Brightness control  
To decrease light intensity, press Fn+F5 and then or  
➜
.
*
Contrast control display.  
Fn+  
(F6)  
Adjusts the contrast. To increase the contrast, press  
Contrast control  
Fn+F6, then  
To decrease contrast, press Fn+F6, then  
Toggles through the LCD, external display (connected  
to the Monitor connector) and both LCD and  
or ➜.  
➜
or  
.
LCD  
Fn+  
Switch to the  
external monitor/ LCD  
/
(F7)  
external display.  
LCD and external display  
Only external display  
Only LCD  
Fn+F8  
Not available on this model.  
Provides for the lowest level of power consumption.  
When you execute this command, the state of the  
system and state of the peripheral devices are written  
to the hard disk and the system power is turned off. To  
return the system to the originals state, use the power  
switch to turn on power.  
Fn+  
(F12)  
System Hibernation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Your Notebook Computer  
23  
Combinations/  
Feature  
Function  
Ejects the DVD-ROM/ CD-ROM drive.  
†
Fn+E  
Eject DVD-ROM/  
CD-ROM  
Fn+D  
Video standby  
Turns off the LCD in order to save power. To turn the  
LCD back on, press any key.  
Fn+F  
Zooms the display size in or out when the display is  
set to a low resolution.  
Change the display size  
Fn+S  
System Idle  
Puts the system into System Idle mode, a power  
management state. To return the system to the active  
state, press any key.  
* The Fn+F6 (contrast control) function is available on model PCG-150 only.  
† The DVD-ROM drive is available on models PCG-F180/PCG-F190. The CD-ROM drive is available on  
models PCG-F150/PCG-F160.  
✍ Some functions are not available until Windows launches.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 VAIO Notebook Computer User Guide  
Using the Touchpad  
The keyboard contains a cursor-pointing device called a touchpad. You  
can point to, select, drag, and scroll objects on the screen using the built-in  
touchpad.  
Pointer  
Touchpad  
Right button  
Left button  
Action  
Description  
Point  
Slide one finger on the touchpad to place the pointer on an item  
or object.  
Click  
Press the left button once.  
Double-click Press the left button twice.  
Right-click  
Press the right button once. In many applications, this action  
displays a shortcut menu of context-sensitive choices.  
Drag  
Slide one finger while pressing the left button.  
Scroll  
Move your finger along the right edge of the touchpad to scroll  
vertically. Move your finger along the bottom to scroll  
horizontally. (The scroll function is available only with  
applications that support a touchpad scroll feature.)  
✍ See Mouse Help for information on touchpad features, such as clicking both buttons  
simultaneously, adjusting touchpad speed, and Easy Launcher functions. To access Mouse  
Help, press the Start button, select Settings, and then select Control Panel. Click the Mouse  
icon in the Control Panel and click the Help button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
25  
Using the Floppy Disk Drive  
The computer comes with the floppy disk drive in the drive bay.  
To insert a diskette  
1
2
Hold the diskette with the label side facing up.  
Gently push the diskette into the drive until it clicks into place.  
Diskette  
Floppy disk drive  
To remove a diskette  
❑
When you finish using the diskette, wait until the LED indicator  
turns off and then press the Eject button to remove the diskette.  
Eject button  
LED indicator  
✍ Do not press the Eject button when the LED indicator is turned on. Otherwise, data may be lost.  
If you have difficulty removing a diskette from the floppy disk drive, remove the floppy disk  
drive from the drive bay.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
26 VAIO Notebook Computer User Guide  
To remove the floppy disk drive  
1
2
Turn off the computer.  
There is a RELEASE lever on the bottom of the computer. Slide this  
lever in the direction of the arrow.  
Drive RELEASE lever on bottom  
3
4
Slide the drive out of the drive bay.  
Insert the weight saver. See “Using the Weight Saver” on page 38.  
To reinsert the floppy disk drive  
1
2
Turn off the computer.  
If another device is in the drive bay, remove the device. See “To  
remove the floppy disk drive” on page 26 or “To remove the second  
battery pack” on page 37.  
3
Insert the floppy disk drive into the drive bay with the VAIO label  
facing up. Continue pushing the drive into the bay until the  
RELEASE lever locks into place.  
Drive bay  
Floppy disk drive  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
27  
Using the DVD-ROM/CD-ROM Drive  
Your computer comes with a DVD-ROM drive (models PCG-F180/ F190)  
or CD-ROM drive (models PCG-F150/ F160). If your computer is  
equipped with a DVD-ROM drive, you can play both DVD-ROMs and  
CD-ROMs.  
To insert a disc  
1
Turn on the computer.  
✍ When the computer is in System Suspend or System Hibernation mode, you cannot  
insert a disc. See “Controlling Power Management” on page 59 for more information  
on System Suspend and System Hibernation modes.  
2
Press the Eject button to open the DVD-ROM/ CD-ROM drive.  
The tray slides out.  
Eject button  
3
Place a DVD-ROM/ CD-ROM in the tray with the label side facing  
up. For DVD-ROMs, which can be played on both sides, the side of  
the disc facing up is the side that plays. Push the disc onto the hub  
until the disc clicks into place.  
Label side facing up  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
28 VAIO Notebook Computer User Guide  
4
Close the tray by pushing it gently.  
✍ Be sure to seat the disc firmly over the DVD-ROM/CD-ROM drive hub fingers. If you do not  
seat the disc firmly, you could damage your DVD-ROM/CD-ROM drive and you may not be  
able to open the tray.  
When you finish using a disc, wait until the LED indicator turns off, then press the Eject  
button to remove the disc.  
When the computer is in System Suspend or System Hibernation mode, you cannot remove  
a disc. See “Controlling Power Management” on page 59 for more information about  
System Suspend and System Hibernation modes.  
If the disc does not come out when you press the Eject button, turn off the computer and  
insert a thin, pointed object into the manual eject hole.  
To play DVD-ROMs  
To achieve optimum performance when playing DVD-ROMs, you should  
use the following recommendations: Your computer should not  
be connected to the port replicator while playing DVD movies or using  
DVD applications. Close any open applications before playing a  
DVD-ROM movie. The DVD player automatically adjusts the screen  
properties when you play a DVD movie. Depending on the display setup  
properties you have selected, you may need to use the Fn + F command  
to expand the movie to full screen size.  
✍ When playing DVD movies on battery power, set the power management profile to  
Maximum Performance. With other profiles, the movies are choppy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook Computer  
29  
Using PC Cards  
Your computer includes two PC card slots. PC cards allow you to connect  
portable external devices such as another hard disk drive, or to connect a  
network.  
✍ The PC card slots can accommodate (at the same time) two Type I, two Type II, or one Type  
III PC card. These slots are compatible with Card Bus.  
Some PC cards may require that you disable idle devices when using the PC card. You can  
use Sony Notebook Setup to disable devices. See “Displaying the Sony Notebook Setup  
Screen” on page 57 for details.  
Be sure to use the most recent software driver provided by the PC card manufacturer.  
If an “!” mark appears on the Device Manager tab in the System Properties dialog box,  
remove the software driver and then reinstall it.  
You may not be able to use some PC cards or some functions of the PC card with this  
computer.  
To insert a PC card  
Use the lower slot for Type III PC cards.  
✍ You do not need to shut down the computer before inserting or removing a PC card.  
1
Pull the PC card release button up away from the computer and push  
it in toward the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
30 VAIO Notebook Computer User Guide  
2
Remove the PC card slot protector.  
When you use a Type III PC card, you need to remove both the top  
and bottom PC card slot protectors.  
3
Insert the PC card into the PC card slot, front label facing up. Gently  
push the card into the slot until the card is fixed into the connector.  
The release button comes out.  
PC card  
✍ Do not force a card into the slot. It may damage the connector pins. If you have difficulty  
inserting a card, check that you are inserting the card with the correct orientation. See the  
manual that came with your PC card for more information on use.  
For some PC cards, if you alternate between normal power operation and the System  
Suspend or System Hibernation power management modes while the card is inserted, you  
may find that a device connected to your system is not recognized. Reboot your system to  
correct the problem.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Notebook Computer  
31  
To remove a PC card  
1
2
3
Close any applications that are using the PC card.  
Click the PC card icon in the taskbar and close the card.  
Pull the PC card release button up and press it in toward the  
computer.  
4
5
Gently grasp the card and pull it out.  
Insert the PC card slot protector back into the empty slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 VAIO Notebook Computer User Guide  
Using Infrared Communication Devices  
Your computer includes an infrared port, located on the left side. You can  
use this port to communicate with other infrared-equipped devices with  
compatible protocols, such as a digital still camera or other computers.  
To use infrared communication with a digital still camera  
Align the infrared ports on the computer and the digital camera so that  
they are in a direct line.  
Infrared port  
To use infrared communication with another computer  
Align the infrared ports on the two computers so that they are in a direct  
line.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
33  
✍ Infrared communication capability can be turned on and off. By default, it is not enabled  
when your system is shipped. To enable infrared use, click the infrared icon in the Windows  
Control Panel and select the Enable infrared communication checkbox on the Options tab.  
You can disable infrared communication when you are not using it to conserve battery life.  
Use the infrared icon in the Windows Control Panel to enable and disable infrared  
communication. Do not use the icon in the taskbar.  
Check the Status tag of the Infrared Monitor in the Windows Control Panel to determine if  
the infrared device is detected.  
If the two devices are too far apart or too close together, data transfer may be interrupted or  
there may be noise in the transmission.  
Do not cover the infrared ports with your hand or any other object.  
Avoid direct sunlight, fluorescent light, or flashing incandescent light near the infrared  
ports.  
See the manual that came with your digital still camera or other infrared communication  
device for more information on installation and use.  
The active area of infrared transmission extends about 39 3/8 inches (1 meter) with a radius  
of 15 degrees.  
Infrared port  
15  
degrees  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 VAIO Notebook Computer User Guide  
Using Power Saving Modes  
When you use a battery as the source of power for your computer, you  
can take advantage of power management settings to conserve battery  
life. In addition to the normal operating mode, which allows you to turn  
off specific devices, your computer has three distinct power saving  
modes: System Idle, System Suspend, and System Hibernation. When  
using battery power, you should be aware that the computer  
automatically enters System Hibernation mode when the remaining  
battery charge drops below 7 percent, regardless of the power  
management setting you select.  
✍ If the battery level falls below 10 percent, you should either attach the AC adapter to  
recharge the battery or shut down your computer and insert a fully charged battery.  
Normal Mode  
This is the normal state of your computer when it is in use. The green  
power indicator light is on in this mode. To save power, you can turn off a  
specific device such as the LCD or the hard disk.  
System Idle Mode  
This mode is convenient if you do not need to use your computer for a  
brief period. The hard disk and video display enter a low power state,  
and the CPU clock and processor stop. The power indicator light is red in  
this mode.  
To activate System Idle mode  
Press Fn+S, or use the PowerPanel utility.  
To return to normal mode  
Press any key. Note that resuming from System Idle using the touchpad or  
mouse is not possible. You must press a key, a PPK, or the power switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
35  
System Suspend Mode  
The computer saves the current state of the system in RAM and switches  
off power to the CPU. The red power indicator light flashes in this mode.  
To activate System Suspend mode  
Press Fn+Esc, or slide the power switch forward and release it  
immediately. You can also use the PowerPanel utility to enter System  
Suspend mode.  
To return to normal mode  
Press any key.  
System Hibernation Mode  
The state of the system is saved on the hard drive and power is turned off.  
The power indicator light is off in this mode.  
To activate System Hibernation mode  
Press Fn+F12. The “Save to Disk Manager” screen appears, and then the  
computer enters System Hibernation mode. You can also use the  
PowerPanel utility to enter System Hibernation mode.  
To return to normal mode  
Turn on the computer by sliding the power switch forward. The  
computer returns to its previous state.  
✍ When returning from System Hibernation mode, the system status stored on the hard disk is  
erased and the computer starts normally if you slide the power switch forward and hold for  
more than four seconds.  
❑
❑
Time to return to normal mode  
System Idle requires less time than System Suspend, and System  
Suspend requires less time than System Hibernation.  
Power consumption  
System Idle uses more power than System Suspend, and System  
Suspend uses more power than System Hibernation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 VAIO Notebook Computer User Guide  
Using a Second Battery Pack  
You can purchase a second rechargeable battery pack. With two battery  
packs, you can extend the time that you use your computer with battery  
power. When using two battery packs, the battery pack you insert first  
charges first. The battery pack you insert second charges when the first  
battery pack is 85 percent full. You can monitor which battery pack is  
charging by observing the battery indicator lights.  
To insert a second battery pack  
1
2
If another device is in the drive bay, remove the device. See “To  
remove the floppy disk drive” on page 26.  
Insert the battery pack into the drive bay.  
If the battery is being used, the battery 2 indicator light turns on.  
Drive bay  
Battery pack  
Label side facing down  
3
Attach the weight saver to the computer to stabilize the battery pack.  
See also “Using the Weight Saver” on page 38.  
Battery pack  
Weight saver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
37  
To charge the second battery pack  
Keep the battery pack in the computer while it is connected to AC power.  
The battery indicator flashes while the battery is charging. See also “To  
charge the battery pack” on page 11 for more information.  
Battery indicators  
Second battery pack  
(not supplied)  
Battery pack (supplied)  
✍ To determine the amount of time the battery lasts, see “Displaying Battery Information” on  
page 62.  
To remove the second battery pack  
1
There is a Release lever on the bottom of the weight saver. To remove  
the battery pack, slide this lever in the direction of arrow 1, then slide  
the RELEASE lever on the bottom of the computer in the direction of  
arrow 2.  
Arrow 2: RELEASE lever  
Arrow 1: Weight saver Release lever  
2
3
Remove the weight saver, and then pull out the battery pack.  
Reinsert the weight saver. See “Using the Weight Saver” on page 38.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
38 VAIO Notebook Computer User Guide  
Using the Weight Saver  
The weight saver protects the drive bay when it is empty.  
To attach the weight saver  
1
If another device is in the drive bay, remove the device. See “To  
remove the floppy disk drive” on page 26 or “To remove the second  
battery pack” on page 37.  
2
Fold out the hinged arm of the weight saver and then push on the  
hinged arm to lock it into place. Slide the weight saver in the  
direction of the arrow until it clicks.  
Weight saver (supplied)  
3
Manually lock the weight saver’s RELEASE lever.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Notebook Computer  
39  
To remove the Weight Saver  
1
There is a release lever on the bottom of the weight saver. To remove  
the weight saver, slide this lever in the direction of arrow 1, then slide  
the RELEASE lever on the bottom of the computer in the direction of  
arrow 2.  
Arrow 1: Weight saver Release lever  
Arrow 2: RELEASE lever  
2
After removing the weight saver, pull out the weight saver’s hinged  
arm and fold it into the weight saver.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Peripheral Devices  
You can add functionality to your computer by connecting any of these  
peripherals:  
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
Phone line (page 42)  
Port replicator (page 43)  
Printer (page 47)  
External display (page 48)  
External mouse or keyboard (page 51)  
External speakers (page 52)  
External microphone (page 53)  
Digital still camera or other serial device (page 54)  
Digital video camera recorder (page 55)  
Universal Serial Bus (USB) device (page 56)  
✍ Before you connect peripherals, turn off the computer and all peripherals.  
Connect the power cord only after connecting all cables.  
Turn on the computer only after turning on all peripherals.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 VAIO Notebook Computer User Guide  
Connecting a Phone Line  
You need to connect a phone line to take advantage of online services and  
the Internet.  
✍ In order to register your Sony VAIO Notebook Computer, register your software online, and  
use Sony Customer Support, you must connect to a phone line. You must register your  
computer to receive the extended warranty.  
1
Plug one end of the phone cable into the phone line jack on the  
computer.  
Phone line jack  
Phone line jack  
Phone cable (not supplied)  
2
Plug the other end into the wall jack.  
✍ Your computer does not work with party lines, cannot be connected to a coin-operated  
telephone, and may not work with multiple phone lines or a private branch exchange (PBX).  
Some of these connections might result in excess electrical current and could cause a  
malfunction in the internal modem.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Peripheral Devices  
43  
Connecting the Port Replicator  
Your notebook computer supports the use of an optional port replicator.  
Attaching a port replicator enables you to connect additional peripherals  
to your computer.  
USB (page 56)  
1
2
5
6
Network (Ethernet)  
Monitor (page 48)  
Serial (page 54)  
Printer (page 47)  
DC In (page 9)  
3
4
7
/
Mouse/Keyboard (page 51)  
✍ The port replicator can be powered only with an AC power adapter. Do not remove the AC  
adapter from the port replicator or the AC outlet while using the port replicator; this may  
cause data damage or hardware malfunctions.  
When using the port replicator for the first time, install the driver supplied with the port  
replicator. When installation is complete, a message appears asking if you want to change  
the system setup. Click Yes, then reboot your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44 VAIO Notebook Computer User Guide  
To attach your computer to the port replicator  
To supply power to your computer while it is connected to the port  
replicator, you can connect the AC adapter directly to the port replicator.  
✍ When attaching your computer to the port replicator, do not attempt to insert or remove the  
battery pack. Lifting and turning the computer with an attached port replicator could cause  
a temporary loss of power.  
1
2
Turn off your computer and disconnect all peripherals.  
On the bottom of the computer, lift the port replicator connector  
cover.  
Port replicator connector  
3
Attach the bottom of the computer to the port replicator connector  
until it clicks.  
Notebook computer  
Port replicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Peripheral Devices  
45  
4
Plug the cable attached to the AC adapter into the DC IN connector on  
the port replicator. Plug the power cord into the AC adapter and an  
AC outlet.  
AC adapter  
Power cord  
✍ Use the AC adapter that comes with your computer or the optional Sony PCGA-AC71  
adapter.  
The  
power indicator light turns green.  
Release lever  
Power  
Port replicator connector  
5
Turn on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 VAIO Notebook Computer User Guide  
To remove your computer from the port replicator when the power is off  
1
2
Turn off your computer and the connected peripherals.  
Pull the levers on each side of the port replicator to disengage the  
computer from the port replicator.  
Lever  
3
Lift the computer away from the port replicator.  
4
Close the port replicator connector cover on the bottom of your  
computer.  
.
✍ It is extremely important to close the port replicator connector cover after removing your  
computer from the port replicator. If the cover is left open, dirt may get inside and damage  
the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Peripheral Devices  
47  
Connecting a Printer  
You can connect a Windows 98-compatible printer to your computer to  
print documents.  
To connect a printer  
❑
Use the  
symbol to locate the Printer connector. Plug the printer  
cable (supplied with the printer) into this port on the computer.  
Power cord  
Printer  
Printer cable  
(supplied with the printer)  
to  
Printer  
✍ See the manual that came with your printer for more information on installation and use.  
Before using the printer, you may need to change the Printer setting in the Sony Notebook  
Setup software. See “Displaying the Sony Notebook Setup Screen” on page 57.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
48 VAIO Notebook Computer User Guide  
Connecting an External Display  
You can connect an external display to your notebook computer. For  
example, you can use the computer with any of the following:  
❑
❑
❑
Computer display (monitor) (page 48)  
Multimedia computer display (page 49)  
Projector (page 50)  
To connect a computer display  
❑
Use the  
symbol on the back of the computer to locate the Monitor  
connector. Plug the display cable (not supplied) into this connector on  
the back of the computer.  
❑
If necessary, plug one end of the display power cord into the display,  
and the other end into an AC outlet.  
Computer display  
Power cord  
to  
Monitor  
Display cable (not supplied)  
✍ See the manual that came with your computer display for more information on installation  
and use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Peripheral Devices  
49  
To connect a multimedia computer display  
You can connect the notebook computer to a multimedia computer  
display that includes built-in speakers and a microphone.  
1
2
3
Use the  
cable into this connector.  
symbol to locate the Monitor connector. Plug the display  
Use the symbol to locate the Headphone connector. Plug the  
speaker cable into this connector.  
Use the symbol to locate the Microphone connector. Plug the  
microphone cable into this connector.  
to  
to  
to  
Monitor  
Multimedia  
computer display  
Display cable  
Power cord  
✍ See the manual that came with your multimedia computer display for more information on  
installation and use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
50 VAIO Notebook Computer User Guide  
To connect a projector  
You can use a projector, such as the Sony LCD Projector, as an external  
display.  
Projector  
to  
to  
Monitor  
Power cord  
Audio cable (not supplied)  
RGB signal cable  
✍ See the manual that came with your projector for more information on installation and use.  
To select a display  
When you connect an external display to the monitor connector, you can  
toggle the output among the Liquid Crystal Display (LCD), the external  
monitor, or both devices.  
Use the Fn+F7 keys to select a display. See also “Selecting the Display  
Mode” on page 65 for more information.  
To  
Press  
Result  
Switch to an  
external  
display  
Fn+F7  
Toggles among the LCD, the external display  
connected to the Monitor connector, and both  
the LCD and external display.  
LCD and external display  
Only external display  
Only LCD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Peripheral Devices  
51  
Connecting an External Mouse or Keyboard  
You can connect an external mouse or keyboard to the computer by  
plugging the mouse or keyboard into the  
connector. To connect both a mouse and keyboard at the same time, you  
must use the port replicator. Connect the keyboard to the Mouse/  
Serial connector of the  
/
Mouse/ Keyboard  
/
Keyboard connector, and the mouse to the  
port replicator. The Mouse/ Keyboard connector requires a PS/ 2®-style  
plug or adapter.  
To connect an external mouse or keyboard  
❑
Use the  
/
symbol to locate the Mouse/ Keyboard connector.  
Plug the keyboard cable or mouse cable into this connector with  
the mark facing up.  
Mouse  
or  
/
to  
Mouse/Keyboard  
Keyboard  
✍ See “Using the Keyboard” on page 18 for more information on using the keyboard.  
See the manual that came with your mouse or keyboard for more information on  
installation and use.  
Before you connect or disconnect the mouse or keyboard, turn off the computer.  
Before connecting a mouse to the Serial port, make sure the mouse is compatible with a  
serial port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
52 VAIO Notebook Computer User Guide  
Connecting External Speakers  
You can enhance the sound quality of your computer by connecting  
external speakers.  
✍ Make sure your speakers are designed for computer use.  
Turn down the volume of the speakers before you turn them on.  
Do not place diskettes on the speakers; the speakers’ magnetic field may damage the data  
on the diskettes.  
To connect external speakers  
❑
Use the symbol to locate the Headphone connector. Plug the  
speaker cable into this connector.  
Speakers  
Speaker cable  
to  
(supplied with speakers)  
Headphone  
✍ See the manual that came with your speakers for more information on installation and use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Peripheral Devices  
53  
Connecting an External Microphone  
You can enhance the quality of sound input by using an external  
microphone.  
✍ Make sure your microphone is designed for computer use.  
To connect an external microphone  
❑
Use the to locate the Microphone connector. Plug the microphone  
cable into this connector.  
Microphone  
to  
Microphone  
✍ See the manual that came with your microphone for more information on installation and  
use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
54 VAIO Notebook Computer User Guide  
Connecting a Digital Still Camera  
or Other Serial Device  
You can connect other computer peripherals, such as the Sony Digital Still  
Camera, to the Serial connector on your computer.  
To connect a digital still camera  
❑
Use the  
symbol to locate the Serial connector. Plug the connecting  
cable (not supplied) into this port on the computer and into the  
Digital I/ O connector on the digital still camera.  
Digital still camera  
to Digital I/O  
to  
Connecting cable  
Serial  
(not supplied)  
✍ The Sony Digital Still Camera is pictured; you may need to connect your camera differently.  
See the manual that came with your digital camera or other serial device for more  
information on installation and use.  
If you use a digital camera that has an infrared data communication system or other infrared  
communication device, see “Using Infrared Communication Devices” on page 32.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Peripheral Devices  
55  
Connecting a Digital Video Camera Recorder  
You can connect a digital video camera recorder to the S200 i.LINK™  
(IEEE 1394) connector.  
To connect a digital video camera recorder  
❑
Plug one end of the i.LINK cable (not supplied) into the i.LINK  
connector on the left side of the computer and the other end into the  
DV In/ Out connector on the digital video camera recorder.  
Digital video  
to i.LINK  
camera recorder  
to DV In/Out  
i.LINK cable  
(not supplied)  
✍ The Sony digital video camera recorder (DCR-PC7) is pictured; you may need to connect  
your camera differently.  
On Sony digital video cameras, connectors labeled “DV In/Out” or “i.LINK” are i.LINK-  
compatible.  
See the manual that came with your digital video camera recorder for more information on  
installation and use.  
Do not connect more than one digital video camera at a time. The software supplied with  
your computer will not recognize multiple cameras.  
The i.LINK connector on the computer does not supply power to external devices. If the  
external device requires power from the i.LINK connector, you cannot use the device with  
the computer.  
The computer supports transfer rates up to 200 Mbps; however, the actual transfer rate is  
the lowest transfer rate of the external device.  
The i.LINK features available may vary depending on the software applications you use. See  
the documentation that came with your software for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
56 VAIO Notebook Computer User Guide  
Connecting a Universal Serial Bus (USB) Device  
You can connect a USB device to your computer.  
To connect a USB device  
❑
Use the symbol to locate the USB connector. Plug one end of the  
USB cable into this port and the other end into the USB device.  
USB device  
USB connecting cable  
to  
(not supplied)  
USB  
You can use the optional Sony USB mouse PCGA-UMS1 with this  
computer. The USB mouse software driver is preinstalled in the  
computer. Therefore you only need to plug the USB mouse into the USB  
connector.  
✍ See the manual that came with your USB device for more information on installation and  
use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customizing Your  
Notebook Computer  
You can customize the settings of your notebook computer. The following  
sections briefly describe how to change your computer’s default settings.  
You can also refer to the Sony Notebook Setup Help for more detailed  
information.  
Displaying the Sony Notebook Setup Screen  
To display the Sony Notebook Setup screen:  
1
2
Click the Start button on the Windows 98 taskbar.  
Point to VAIO and click Sony Notebook Setup.  
3
4
Select the tab for the item you want to change. See “Notebook Setup  
Tabs” on page 58.  
After you finish, click OK.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 VAIO Notebook Computer User Guide  
Notebook Setup Tabs  
Tab  
Description  
About This Computer  
Display system information, including memory  
capacity, serial number, and BIOS version.  
Audio  
Printer  
Change the volume of the sounds that play while the  
operating system is loading.  
Select printer port mode settings.  
Power On  
Device Sequence  
Select the order of drives and devices from which  
you want to load the operating system. You can  
specify the hard drive as well as other drives  
inserted into your computer.  
Touchpad  
When you connect an optional mouse to the Serial  
port of your computer, you can make your touchpad  
inactive. You can also customize the settings of your  
mouse using the mouse utility.  
Power On Password  
Enable Ports  
Set the password to secure your computer.  
Change the hardware resources such as I/ O address,  
IRQ, or DMA depending on the optional hardware  
or software you use. Disabling ports releases  
resources to the system. To change the serial or  
infrared settings, click Advanced on the Basic/  
Advanced tab.  
Basic/ Advanced  
Toggle between Advanced mode (additional screens  
with advanced settings) and Basic mode of display.  
Advanced mode includes Serial, Infrared, and View  
Resources tabs.  
✍ For more information about each option, click Help on the Sony Notebook Setup screen to  
display the Help file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customizing Your Notebook Computer  
59  
Controlling Power Management  
The PowerPanel utility allows you to control the power management of  
your notebook computer and provides key information about system  
activity and battery life. The following sections briefly describe how to  
conserve your computer’s battery power. You can also refer to the  
PowerPanel Help for more detailed information.  
Power Management Profiles  
PowerPanel provides several predefined power management profiles.  
Each profile consists of a group of specific power management settings  
that are designed to meet specific power management goals—ranging  
from maximum power management to no power management. You can  
change the settings for any of the predefined profiles or you can create  
your own profile to suit your portable computing needs. The predefined  
profiles are:  
Icon  
Description  
Maximum Performance – Provides the best system performance  
while still conserving power.  
Maximum Battery Life – Provides power saving features to give  
you maximum battery life and good performance. It slows the  
computer and puts it into System Suspend mode after a specified  
time period.  
Disable Power Management – Turns off all power management  
features such as System Suspend and System Hibernation modes.  
AC Power – The power management state when AC power is in  
use. Similar to the Power Management Off setting. PowerPanel  
automatically loads the AC profile unless you disable this feature.  
Games – Disables the display and the Hard Disk Standby timer.  
Presentation – Keeps the display on at all times while it conserves  
power. This option is ideal for slide show presentations. You can  
establish settings for LCD (Video) Standby, Hard Disk Standby, and  
System Suspend to optimize power management for your system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60 VAIO Notebook Computer User Guide  
Icon  
Description  
Word Processing – Optimizes power management with longer  
timeouts on the hard disk and display screen. You can also establish  
settings for LCD (Video) Standby, Hard Disk Standby, and System  
Suspend to optimize power management for your system.  
Spreadsheet – Optimizes performance and power requirements for  
®
spreadsheet applications such as Microsoft Excel.  
Communications – Extends battery life by initiating a quick display  
timeout. The Internal modem remains powered. You can also  
establish settings for LCD (Video) Standby, Hard Disk Standby, and  
System Suspend to optimize power management for your system.  
Automatic Profile Selection – Automatically switches to a profile  
suitable for active applications.  
Power Management Commands  
PowerPanel also provides power management commands that you can  
use to activate specific power management functions and to control  
power for a specific device. You might use these commands when you  
want to override a profile setting or initiate an immediate action, such as  
putting the system into Video Standby mode before the Video Standby  
timer expires.  
Icon  
Description  
System Idle – Puts the system into Idle mode, a state of low power  
consumption. This state stops the CPU clock and puts all  
peripherals into low power mode. To return the system to the active  
state, press any key or power switch on your system.  
System Suspend – Puts the system into System Suspend mode, a  
power management state that saves the state of the system and  
peripheral devices in memory (RAM). Power consumption reduces  
to a minimum, and the system remains on. To return the system to  
the active state, press any key or the power switch on your computer.  
System Hibernation – Provides for the lowest level of power  
consumption. The system writes the state of the system and  
peripheral devices to the hard disk and turns off the system power.  
To return the system to the original state, use the power switch to  
turn on power. The system saves the data in the Save to Disk  
Partition on the hard drive.  
LCD (Video) Standby – Turns off the LCD to save power. If you  
turn off the Video Standby timer, the display remains active except  
when the system enters System Suspend mode. The video display  
system is one of the largest consumers of power in the system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing Your Notebook Computer  
61  
To activate PowerPanel  
When you start your computer, the PowerPanel toolbar appears along  
the right edge of the screen by default. If the toolbar does not appear,  
right-click the taskbar at the bottom of the screen. Select Toolbar from  
the pop-up menu, then click PowerPanel. The PowerPanel appears on  
the taskbar.  
The Current Profile icon appears on the PowerPanel toolbar. To change  
the profile, click the profile icon, then select a profile from the list of  
profiles.  
To select the power management command, click the power management  
button you want to set.  
✍ Refer to the PowerPanel Help for information on customizing the PowerPanel toolbars.  
When you use the battery pack to power your computer, your system selects the Maximum  
Battery Life power management profile by default. If you select a different power  
management profile while using battery power, that profile is selected automatically the  
next time you use the battery pack to power your computer.  
To customize the power management settings  
You can change the power management settings, such as the system timer  
and brightness of the screen.  
1
2
3
4
5
6
7
Click the profile icon on the PowerPanel toolbar.  
Select Edit Profile from the menu.  
Click a profile for which you want to change the setting.  
Double-click an item for which you want to change the setting.  
Click a desired setting.  
Click the File menu, then click Save.  
Click the File menu, then click Close.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62 VAIO Notebook Computer User Guide  
Displaying Battery Information  
You can display detailed information for each of the batteries in your  
computer. The following sections briefly describe how to display your  
computer ’s general battery information. You can also refer to the  
BatteryScope Help for more detailed information.  
Activating BatteryScope  
To activate BatteryScope  
When you start your computer, the BatteryScope toolbar appears along  
the right edge of the screen by default. If the toolbar does not appear,  
right-click the taskbar at the bottom of the screen. Select Toolbar from the  
pop-up menu, then click BatteryScope. The BatteryScope appears on the  
taskbar.  
You can also view battery gauges on the shared PowerPanel and  
BatteryScope toolbar.  
❑
❑
Percentage indicator  
Displays the percentage of the remaining capacity.  
Time indicator  
Displays estimated time (hours/ minutes) remaining before the  
battery fully drains, also referred to as the time-to-empty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing Your Notebook Computer  
63  
Battery Icon Descriptions  
Battery icon  
Battery status  
Discharging  
Fully charged  
Charging  
Not in use  
No battery  
Displaying Detailed Battery Information  
You can obtain detailed information about the batteries.  
❑
Click the battery icon on the taskbar to display the BatteryScope  
window.  
The screen appears displaying the General tab, which contains  
information such as the estimated time-to-empty and charging time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 VAIO Notebook Computer User Guide  
To display information on individual batteries  
1
2
Click the Primary battery tab to display information for the battery in  
the bay on the left side.  
Click the Secondary battery tab to display information for the battery  
in the bay on the right side.  
You can display the information about each battery, such as estimated  
time-to-empty, manufacturer, capacity, and other information.  
To customize the BatteryScope toolbar and alarm system  
You can customize the BatteryScope toolbar to suit your portable  
computing needs, including modifications to the alarm settings. Refer to  
the BatteryScope Help for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing Your Notebook Computer  
65  
Selecting the Display Mode  
When you connect an external display, you can toggle the display mode  
between the LCD on your computer and external displays.  
1
2
3
4
5
Click the Start button on the Windows 98 taskbar.  
Point to Settings and click Control Panel.  
Click Display.  
Click the Settings tab, then click the Advanced button.  
Click the NeoMagic® tab.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66 VAIO Notebook Computer User Guide  
6
Select the type of display:  
External  
Displays an external computer display or RGB  
(CRT/ Projector)  
connected projector that is connected to the  
Monitor connector on your computer.  
Internal (LCD)  
Displays the LCD of your computer.  
✍ You can turn off the computer's LCD display by removing the checkmark from the LCD  
option under Internal Display.  
If you select CRT/Projector and turn off the LCD, you can use the Refresh Rate slider to  
change the display's horizontal frequency. This setting can be made only for CRT display.  
If you select Independent Display Timing (see page 67), you can change both the  
resolution and the refresh rate.  
7
8
Click OK. If you have made changes, the System settings change  
dialog box appears. Select Yes to restart Windows.  
If you have not made changes, click OK to close the Display  
Properties screen.  
✍ Depending on the types of computer displays and projectors you are using, you may not be  
able to display the computer's LCD and external display simultaneously.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customizing Your Notebook Computer  
67  
Using a CRT or Projector  
When you select CRT/ Projector as the display mode, you can make  
additional settings, described as follows:  
1
After selecting CRT/ Projector as the type of external display (step 6  
on page 66), click Advanced Settings.  
2
3
Click the External Display Options tab.  
Select the following options:  
External Display Device:  
CRT  
Connects with the external computer display.  
Connects with the projector.  
Projector  
Monitor Settings:  
Independent  
Display Timing  
Click to place a checkmark when you want to set  
the resolution and refresh rate differently from  
the computer's LCD. To change the resolution  
and refresh rate, see the notes to step 6 on  
page 66.  
Projector Settings:  
Type  
Select the projector's resolution from the drop-  
down box.  
4
Click OK.  
✍ You cannot select Independent Display Timing when the display is set to True Color (24 bit).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
68 VAIO Notebook Computer User Guide  
Display Specifications  
LCD Display Mode  
Resolution  
1024 x 768  
800 x 600  
640 x 480  
Number of colors  
65,536* (PCG-F150); 16,770,000* (PCG-F160/ 180/ 190)  
16,770,000*  
16,770,000*  
* Achieved by graphic accelerator's dithering function  
External Display Mode  
Resolution  
1280 x 1024  
1024 x 768  
800 x 600  
Number of colors  
256  
16,770,000  
16,770,000  
16,770,000  
640 x 480  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing Your Notebook Computer  
69  
Starting Your Favorite Software with  
Programmable Power Key (PPK) Setup  
The PPK Setup software enables you to start your favorite software by  
simply pressing the Programmable Power Keys. This section briefly  
describes how to use the Programmable Power Keys. You can also refer to  
the PPK Setup Help for more detailed information.  
Programmable  
Power Keys  
Programmable Power Keys  
Your computer has three Programmable Power Keys, which are set to  
activate as follows by default:  
Press:  
P1  
To activate:  
VAIO demo  
The e-mail software  
P2  
*
P3  
System Suspend mode  
* When power is off, pressing this key turns your computer on.  
To use the PPK Setup window:  
1
2
Double-click the PPK Setup icon on the taskbar. The PPK Setup  
window appears.  
Click a Programmable Power Key tab for the Programmable Power  
Key you want to use.  
3
4
5
6
Click the combination of keys you want to use.  
Select “Select from the registered files list,” then click Next.  
Select a desired setting, then click OK.  
Click OK.  
✍ You can change PPK launch files, select files not currently registered, or disable the PPK.  
Refer to the PPK Help for more detailed information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70 VAIO Notebook Computer User Guide  
Using the internal Timer:  
You can use the internal Timer to start software at a specific time. You can  
use this feature when the computer is on or in System Suspend mode.  
✍ When selecting software that uses a phone line: The computer may not be able to  
disconnect the phone line due to communication and server conditions. Be sure to monitor  
the status of the software when running PPK Setup, and manually disconnect the phone line  
if you notice a malfunction. Furthermore, when using the Timer to start the software, it is  
advised that you set the computer to enter System Suspend or System Hibernation mode  
after a certain time. This allows the computer to disconnect the phone line if the computer  
fails to disconnect the line normally. However, the computer cannot disconnect the phone  
line when it enters System Suspend mode if the internal modem ring resume is set to On.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing Your Notebook Computer  
71  
Using the Dual Display Function  
The dual display function allows you to distribute portions of your  
desktop across separate displays. For example, if you have an external  
monitor attached to the monitor connector, your LCD display and the  
monitor can function as a single desktop. You can move the cursor off one  
display and onto the other. This allows you to drag objects, such as an  
open application window or a toolbar, from one display to the other. This  
configuration of a single desktop distributed across separate displays is  
referred to as a virtual desktop.  
Virtual desktop  
Your LCD display  
External monitor  
Selecting dual display mode  
You must restart Windows to use dual display mode. Save your work and  
close any open applications before changing to dual display mode, then  
follow these steps:  
1
2
3
4
5
6
Click the Start button on the Windows 98 taskbar.  
Point to Settings and click Control Panel.  
Click the Display icon.  
Click the Settings tab.  
Click the Advanced button.  
Click the NeoMagic tab.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72 VAIO Notebook Computer User Guide  
7
Check the Set Dual-Display option and click OK. The System Settings  
Change dialog box appears.  
8
9
Click Yes to restart your system.  
Repeat steps 1 to 3 to display the Display Properties screen.  
10 Click the display icon number 2.  
11 Click Yes.  
12 Click OK.  
Setting the colors and resolution for each display  
You can set the display colors and resolution for each display that is part  
of a virtual desktop.  
Follow steps 1 to 4 above to display the Display Properties screen. Select  
the display you wish to change (1 or 2) by clicking on the icon of the  
display. You can change colors by selecting an option from the Colors list.  
Use the slider in the Screen area to change the resolution. Click OK or  
Apply. Click OK to confirm that you want to make the changes.  
Customizing the virtual desktop  
You can customize dual display mode by changing the position of the two  
desktops that comprise the virtual desktop.  
In the Display Properties screen, drag the icons of display 1 or display 2,  
moving them to a new position relative to each other. The two display  
icons must be connected to create a virtual desktop. Click OK to apply the  
change.  
Releasing the dual display setting  
You must restart Windows to return to single display mode. Save your  
work and close any open applications before returning to single display  
mode. Follow the steps in the section above on Selecting dual display  
mode. In step 7, remove the check from the Set Dual-Display option. You  
must restart Windows before the change takes effect.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
Sony provides several support options for your Sony computer. When  
you have questions about your computer and the preinstalled software,  
check these sources for answers, in the following sequence:  
1
VAIO Notebook  
Computer  
Read Me First  
Contains a complete list of the items that ship with  
your computer, product specifications, software  
support information, and the most up-to-date  
information on using your computer.  
2
3
VAIO Notebook  
Computer User  
Guide  
Explains how to use your notebook computer and  
connect peripheral devices.  
Online User  
Guide  
This electronic version of the User Guide contains  
additional information on the preinstalled software  
titles. You can access this guide from the Windows  
Start menu by selecting Programs/ VAIO/  
Documentation.  
4
5
Manuals and  
online help files  
that may  
accompany your  
preinstalled  
software  
Most of the manuals for preinstalled software are  
located on your hard disk drive as online help files.  
You can access the online help files from the Help  
menu in the specific application. A printed manual is  
available for some applications.  
Knowledge  
Database  
Provides instant access to information on commonly  
encountered problems. Enter a description of your  
problem and the Knowledge Database searches for  
the corresponding solutions online. You can access  
the Sony Knowledge Database at:  
http:/ / www.sony.com/ pcsupport/  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74 VAIO Notebook Computer User Guide  
6
7
Sony  
Fax-on-Demand  
This service provides you with answers to commonly  
asked questions. You can use this automated service  
to request a list of available topics and then select the  
topics that you want to receive. To contact the Sony  
fax-on-demand service, call 1-888-4SONYPC  
(1-888-476-6972). (Requires a fax machine or your  
fax software.)  
Calling Sony  
Customer  
Support  
You can call and speak with a Sony Customer  
Support Representative without using your  
computer by calling 1-888-4SONYPC  
(1-888-476-6972). Software support is available free of  
charge for 90 days after the original date of purchase.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
75  
Troubleshooting  
This section describes how to solve common problems you may  
encounter when using your computer. Many problems have simple  
solutions, so try these suggestions before you call Sony Customer  
Support.  
✍ When you reconnect devices be sure to turn off the computer as described in “Shutting  
Down Your Computer” on page 15. Turning off the computer using other methods may  
result in data loss.  
My computer does not start  
❑
Check that the computer is plugged into a power source and that it is  
turned on. Check that the power indicator on the front panel of the  
computer indicates that the power is on.  
❑
Check that the battery packs are inserted properly and that they are  
charged.  
❑
❑
Make sure there is no diskette in the floppy disk drive.  
Confirm that the power cord and all cables are connected firmly, as  
described in “Connecting Peripheral Devices” on page 41.  
❑
❑
If you plugged the computer into a power strip or UPS, make sure the  
power strip or UPS is turned on and working.  
If you are using an external display, check that it is plugged into a  
power source and turned on. Check that the brightness and contrast  
controls are adjusted correctly. See the manual that came with your  
display for details.  
❑
❑
Moisture condensation may have occurred. Do not use the computer  
for at least one hour and then turn on the computer.  
Your computer’s internal backup battery may be low on power.  
Change the backup battery located on the bottom of your computer,  
following the procedure in “Replacing the Internal Backup Battery”  
on page 82.  
When I turn on my computer, the message “Operating system not found”  
appears and Windows does not start  
❑
Check the floppy disk drive to see if a non-bootable diskette is in the  
drive.  
❑
If a non-bootable diskette is in the drive, turn off the computer,  
remove the diskette, and then turn on the computer again. Confirm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76 VAIO Notebook Computer User Guide  
that Windows starts properly. If Windows still does not start, follow  
the procedure below to initialize the BIOS.  
❑
If the floppy disk drive is empty, follow the steps below to initialize  
the BIOS:  
1 Remove any peripheral devices connected to the computer.  
2 Turn the computer off and then turn it on again.  
3 Turn on the computer and press the F2 key when the Sony logo appears.  
The BIOS setup menu screen appears.  
4 Press the arrow keys to select the Exit menu.  
5 Press the arrow keys to select Get Default Values and then press the Enter  
key. The message “Load default configuration now?” appears.  
6 Check that [Yes] is selected, then press the Enter key.  
7 Press the arrow keys to select Exit (Save Changes) and then press the Enter  
key. The message “Save configuration changes and exit now?” appears.  
8 Check that [Yes] is selected, then press the Enter key. The computer  
restarts.  
If your computer still displays the message “Operating system not  
found” and Windows does not start, contact Sony Customer Support.  
My LCD does not display anything  
❑
Check that the computer is plugged into a power source and that it is  
turned on. Check that the power indicator on the front panel of the  
computer is on.  
❑
❑
Check that the battery packs are inserted properly and that they are  
charged.  
The computer may be in LCD (Video) Standby mode. Press any key  
to activate the display.  
The screen image on my external display is not centered or sized properly  
Use the controls on your external display to adjust the image. See the  
manual supplied with your display for more information.  
My computer “locks up”  
❑
Try restarting the computer. On the Windows taskbar, click the Start  
button, click Shut Down, and then click Restart the computer.  
❑
If you cannot restart as described in the preceding step, you can  
restart the computer by pressing Ctrl+Alt+Delete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
77  
❑
❑
If the previous step does not work, slide the power switch toward the  
front and hold it for at least four seconds. This turns off the power.  
If your computer locks up while playing a DVD-ROM/ CD-ROM,  
stop the DVD-ROM/ CD-ROM, and restart the computer by pressing  
Ctrl+Alt+Delete.  
✍ Pressing Ctrl+Alt+Delete may result in data loss in files that are currently open.  
My software program “locks up” or crashes  
Contact the software publisher or designated provider for technical  
support. See the online version of Read Me First for a complete list of  
phone numbers.  
My DVD-ROM drive tray does not open  
❑
❑
❑
Make sure the computer is turned on.  
Press the Eject button on the DVD-ROM/ CD-ROM drive.  
If the Eject button does not work, you can open the tray by inserting a  
sharp, pointed object into the hole to the right of the Eject button.  
I cannot play a CD-ROM  
❑
❑
Make sure the label of the CD-ROM is facing up.  
If the CD-ROM requires software, make sure the software is installed  
according to the program’s instructions.  
❑
Moisture condensation may have occurred. Leave the computer for at  
least 1 hour while the computer is turned on.  
❑
❑
Clean the CD-ROM.  
Check the speaker volume.  
I cannot play a DVD-ROM  
❑
If a region code warning appears when you are using the DVD  
player, it could be that the DVD-ROM you are trying to play is  
incompatible with the DVD-ROM drive in your notebook computer.  
The region code is listed on the disc’s packaging.  
❑
If you hear audio but cannot see video, your computer’s video  
resolution may be set too high. For best results, change the Windows  
Control Panel/ Display/ Settings to 800 x 600 using 256 colors.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78 VAIO Notebook Computer User Guide  
❑
If you see video but cannot hear audio, check all of the following:  
Make sure your DVD player’s mute setting is off. Check the master  
volume setting in the audio Mixer. If you have connected speakers  
externally, check the volume settings in your computer speakers and  
check the connections between your speakers and the computer.  
Check the Windows Control Panel/ System/ Device Manager to see  
that the drivers are installed properly.  
❑
A dirty or damaged disc may cause the computer to “hang” while it  
tries to read the disc. If necessary, reboot the computer, remove the  
disc, and then check that it is not dirty or damaged. For cleaning  
instructions, see “On Cleaning CD-ROMs and DVD-ROMs” on  
page 90.  
When I click an application icon a message appears, such as “You must insert  
the application CD into your CD-ROM drive,” and the software does not start  
❑
Some titles require specific files that are located on the application’s  
CD-ROM. Insert the disc and try starting the program again.  
❑
Make sure you place the disc in the tray with the label side facing up.  
My floppy disk drive cannot write to a diskette  
❑
If the diskette is write-protected, disable the write-protect feature or  
use a diskette that is not write-protected.  
❑
Check that the diskette is properly inserted into the floppy disk drive.  
My speakers have no sound  
❑
❑
❑
❑
If the built-in speakers are turned off, press Fn+F3 to turn on the  
speakers.  
If the speaker volume is turned to the minimum, press Fn+F4, and  
then press or ➜ to increase the volume.  
If your computer is powered by batteries, check that the battery packs  
are inserted properly and that they are charged.  
If you are using an application that has its own volume control, check  
that the volume is turned up.  
❑
❑
Check the volume controls in Windows 98.  
If you connect external speakers, check that the speakers are properly  
connected and the volume is turned up. If the speakers have a mute  
button, make sure it is off. If the speakers are powered by batteries,  
check that the batteries are inserted properly and that they are  
charged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
79  
❑
If you have connected an audio cable to the Headphone connector,  
disconnect the cable.  
My modem does not work  
❑
Check that the phone line is plugged into the line jack. See  
“Connecting a Phone Line” on page 42 for details.  
❑
Check that the phone line is working. You can check the line by  
plugging in an ordinary phone and listening for a dial tone.  
❑
❑
Check that the phone number the program is dialing is correct.  
Check that the software you are using is compatible with the  
notebook computer modem. (All preinstalled programs are  
compatible.) Call the software publisher or Sony Customer Support.  
My modem connection is slow  
The computer ’s modem uses K56flex™ technology and V.90 capability.  
Many factors influence modem connection speed, including telephone  
line noise or compatibility with telephone equipment (such as fax  
machines or other modems). If you think your modem is not connecting  
properly to other PC-based modems, fax machines, or your Internet  
Service Provider, check the following:  
❑
Have your phone company check that your phone line is free from  
any line noise.  
❑
If your problem is fax-related, check that there are no problems with  
the fax machine you are calling and that it is compatible with fax  
modems.  
❑
❑
If you are having a problem connecting with your Internet Service  
Provider, check that the ISP is not experiencing technical problems.  
If you have a second phone line available, try connecting the modem  
to that line.  
My microphone does not work  
If you are using an external microphone, check that the microphone is  
plugged into the Microphone connector. See “Connecting an External  
Microphone” on page 53 for details.  
My mouse does not work  
❑
If you are using an external mouse, check that the mouse is plugged  
into the mouse connector. See “Connecting an External Mouse or  
Keyboard” on page 51 for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80 VAIO Notebook Computer User Guide  
❑
If you connected an external mouse while your computer is on, you  
must restart your computer.  
❑
If you are using an optional Sony USB mouse PCGA-UMS1, check  
that the mouse is plugged into the USB connector.  
My touchpad does not work  
You may have disabled the touchpad while no mouse was connected to  
the computer. If so, you must restart the computer to make the touchpad  
work again.  
I cannot use DV devices. The message “DV equipment seems to be  
disconnected or turned off” appears.  
❑
Check that the DV device is turned on and that the cables are  
properly connected.  
❑
If you are using multiple i.LINK devices, the combination of the  
connected devices may cause unstable operation. In this case, turn off  
the power to all connected devices and disconnect unused devices.  
Check the connection, then turn on the power again.  
My touchpad interprets a single tap as a double-click  
Click the Mouse icon in the Control Panel and then change the button  
assignments in the Mouse Properties dialog box. One of the buttons is  
assigned to the double-click action.  
My computer does not shut down  
It is best to shut down your computer using the Shut Down command on  
the Windows 98 Start menu. Using other methods, including those listed  
here, may result in loss of unsaved data. If the Shut Down command does  
not work properly, follow these steps:  
❑
Restart the computer by pressing Ctrl+Alt+Delete. If this does not  
work, slide the power switch forward and hold it for at least four  
seconds to turn off the power.  
❑
Unplug the computer from the AC adapter and remove the battery  
pack from your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
81  
My PC card is not working  
❑
❑
Make sure the PC card is compatible with Windows 98.  
Use the Sony Notebook Setup utility to disable devices you are not  
currently using.  
The sound of my computer’s fan is too loud  
Use the PowerPanel utility to change the Thermal Control Strategy  
setting to Quiet. This setting slows down the CPU speed. See the  
PowerPanel Help for more information.  
I cannot print  
The default setting for the printer port mode is correct for most printers.  
If you cannot print, try changing the printer port mode. In Sony  
Notebook Setup, select the Printer tab. If the printer port mode is set to  
ECP, change it to bi-directional. If the printer port mode is set to  
bi-directional, change it to ECP. See “Displaying the Sony Notebook  
Setup Screen” on page 57 for details on using Sony Notebook Setup.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82 VAIO Notebook Computer User Guide  
Replacing the Internal Backup Battery  
The backup battery will last about three years. When the battery is low  
on power, replace it with a Sony lithium battery CR2025 or compatible.  
To replace the backup battery  
1
Turn off the computer and connected devices, then unplug all the  
cables.  
2
Unscrew the battery cover to open it.  
Screw 1  
Screw 2  
3
4
Remove the battery.  
Insert a new battery and close the cover.  
Follow the procedure below to set the clock.  
To set date and time  
After replacing the backup battery, be sure to set the time as follows:  
1
Turn on the computer.  
The message “Press <F1> to resume, <F2> to Setup” appears at the  
bottom of the display.  
2
Press F2.  
The BIOS Setup menu starts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Help  
83  
3
4
Set the date (month/ day/ year).  
Press Enter to move to the next item. To enter 01/ 31/ 1999, for  
example, follow these steps: Type 1, press Enter, type 31, press Enter,  
type 1999, then press Enter.  
Press  
to select System Time, then set the time  
(hour:minute:second).  
Press Enter to move to the next item.  
Press ➜ to select Exit, then press  
5
6
7
8
to select Get Default Values.  
The message “Load default configuration now?” appears.  
Make sure that Yes is selected and press Enter.  
➜
If No is selected, press to select Yes.  
Select Exit (Save Changes), then press Enter.  
The message “Save configuration changes and exit now?” appears.  
Make sure that Yes is selected and press Enter.  
The computer restarts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84 VAIO Notebook Computer User Guide  
Using the System and Application  
Recovery CDs  
The following sections describe how to use the System Recovery and  
Application Recovery utilities.  
Using the System Recovery CD(s)  
You can reinstall software titles that shipped with your computer if they  
are corrupted or accidentally erased. You may not need to recover the  
entire contents of your hard drive. If you experience a problem with your  
computer, reinstalling an individual device driver or software title may  
correct the problem. Use the Application Recovery CD(s) to reinstall  
individual applications or device drivers. See “Using the Application  
Recovery CD(s)” on page 86.  
The System Recovery CD contains a backup copy of all the software  
originally installed on your hard disk drive. It can be used only to  
recover the hard disk of the notebook computer you purchased.  
The System Recovery utility gives you three options:  
❑
Full Restore without Format restores all the software titles that  
originally came with your computer without formatting the hard  
disk.  
❑
❑
Full Restore with Format formats the hard disk drive and then  
restores all the original software.  
Operating System Only restores the Windows 98 operating system,  
the notebook computer utility programs, and the device drivers that  
shipped with your computer.  
! If you choose the Full Restore with Format or Operating System Only option,  
your hard disk will be formatted, which removes all the information on the  
hard disk drive. You will lose any software you have installed and any other  
files you have created since you started to use your computer. This means you  
will have to reinstall any applications that were not included with the  
computer when you purchased it. If you choose the Full Restore without  
Format option, you may need to reinstall applications that were not included  
with the computer when you purchased it. If you have any questions on using  
the System Recovery CD, contact Sony Customer Support.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Help  
85  
To use the System Recovery CD(s)  
✍ You need to complete the Windows 98 registration process when you use the System  
Recovery CD. Make sure you have the product ID number located on the cover of your  
Microsoft Windows 98 “Getting Started” manual. You will need this number to complete  
the recovery process.  
1
2
Insert the Sony System Recovery CD in the DVD-ROM/ CD-ROM  
drive.  
✍ The System recovery utility boots from the DVD-ROM/CD-ROM drive. It must be in the DVD-  
ROM/CD-ROM drive when you turn on the computer.  
Shut down your computer as described in “Shutting Down Your  
Computer” on page 15.  
3
4
Wait four seconds and turn on your computer.  
Click OK to signify you have read and accept the Microsoft End-User  
License Agreement.  
5
When the System Recovery menu appears, follow the on-screen  
instructions to complete the recovery process.  
✍ Your system may include one or two System Recovery CDs. If you have two System Recovery  
CDs, insert the first CD to run the System Recovery program. You are prompted to insert the  
second CD once the information from the first CD has been installed.  
The recovery process takes from 30 to 60 minutes to complete.  
If your computer does not start from the Recovery CD  
1
2
Slide the power switch forward and hold it for more than four  
seconds to turn off the computer.  
Turn on the computer. When the Sony logo is displayed, press the F2  
key. The BIOS setup menu screen appears.  
3
4
Press the arrow keys to select the Exit menu.  
Press the arrow keys to select Get Default Values and then press the  
Enter key. The message “Load default configuration now?” appears.  
5
6
Check that [Yes] is selected, then press the Enter key.  
Press the arrow keys to select Exit (Save Changes) and then press the  
Enter key. The message “Save configuration changes and exit now?”  
appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86 VAIO Notebook Computer User Guide  
7
Check that [Yes] is selected, then press the Enter key. The computer  
restarts from the Recovery CD.  
Using the Application Recovery CD(s)  
The Application Recovery CD(s) allows you to reinstall individual  
applications and device drivers if they are corrupted or accidentally  
erased. Reinstalling an individual device driver or software title may  
correct a problem you are experiencing with your computer, and you may  
not need to recover the entire contents of your hard drive. If you do need  
to reinstall all the software titles that shipped with your computer, use the  
System Recovery CD(s). See “Using the System Recovery CD(s)” on  
page 84.  
You can also use the Application Recovery CD to install Windows NT®  
Workstation 4.0 drivers on your computer.  
✍ You must be in Windows to run the Application Recovery CD. The application will not run  
from DOS. If you have any questions on using the Application Recovery CD, contact Sony  
Customer Support.  
To use the Application Recovery CD(s)  
1
2
Turn on your computer. If your computer is already on, close all  
applications.  
When the Windows desktop appears, insert the Sony Application  
Recovery CD in the DVD-ROM/ CD-ROM drive. The Application  
Recovery utility loads automatically.  
3
When the Application Recovery menu appears, select the icon for the  
application you want to restore and then follow the on-screen  
instructions to complete the recovery process.  
✍ Your system may include one or two Application Recovery CDs. If you have two Application  
Recovery CDs, insert the first CD to run the Application Recovery program. You may be  
prompted to insert the second CD, depending on the application you wish to restore.  
For a list of the contents of the Application Recovery CD(s), see the online version of Read  
Me First.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes on Use  
This section describes safety guidelines and precautions to help protect  
your computer from potential damage.  
On Handling the LCD Screen  
❑
❑
❑
Do not leave the LCD facing the sun as it can damage the LCD. Be  
careful when using the computer near a window.  
Do not scratch the LCD or exert pressure on it. This could cause  
malfunction.  
Using the computer in low temperature conditions may produce a  
residual image on the screen. This is not a malfunction. When the  
computer returns to normal temperature, the screen returns to  
normal.  
❑
A residual image may appear on the screen if the same image is  
displayed for a lengthy period of time. The residual image disappears  
in a while. You can use a screen saver to prevent residual images.  
❑
❑
The screen becomes warm during operation. This is normal and does  
not indicate a malfunction.  
The LCD is manufactured using high-precision technology. You may,  
however, see tiny black points and/ or bright points (red, blue, or  
green) that continuously appear on the LCD. This is a normal result  
of the manufacturing process and does not indicate a malfunction.  
On the Power Source  
❑
❑
Your computer operates on 100V-240V AC 50/ 60 Hz.  
Do not share the AC outlet with other power-consuming equipment,  
such as a copy machine or shredder.  
❑
❑
You can purchase a power strip with a surge protector. This device  
prevents damage to your computer caused by sudden power surges  
such as those that may occur during an electrical storm.  
Do not place heavy objects on the power cord.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
88 VAIO Notebook Computer User Guide  
❑
To disconnect the cord, pull it out by the plug. Never pull the cord  
itself.  
❑
Unplug your computer from the wall outlet if you will not be using  
the computer for a long time.  
❑
❑
When the AC adapter is not used, unplug it from the AC outlet.  
Use only the AC adapter supplied. Do not use any other AC adapter.  
On Handling  
❑
❑
❑
Clean the cabinet with a soft, dry cloth or a soft cloth lightly  
moistened with a mild detergent solution. Do not use any type of  
abrasive pad, scouring powder, or solvent such as alcohol or benzine,  
as these may damage the finish of your computer.  
Should any solid object or liquid fall into the computer, shut down  
your computer and then unplug it. You may want to have the  
computer checked by qualified personnel before operating it any  
further.  
Do not drop the computer or place heavy objects on top of the  
computer.  
On Installation  
❑
Do not place your computer in a location subject to:  
❑
❑
❑
❑
❑
❑
❑
Heat sources, such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Moisture or rain  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 95º F (35º C) or less than  
50º F (10º C)  
❑
High humidity  
❑
❑
Do not place electronic equipment near your computer. The  
computer ’s electromagnetic field may cause a malfunction.  
Provide adequate air circulation to prevent internal heat buildup. Do  
not place your computer on porous surfaces such as rugs or blankets,  
or near materials such as curtains or draperies that may block its  
ventilation slots. Leave a space of at least 8 inches behind the back  
panel of the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Use  
89  
❑
❑
The computer uses high-frequency radio signals and may cause  
interference to radio or TV reception. Should this occur, relocate the  
computer a suitable distance away from the set.  
Use only specified peripheral equipment and interface cables;  
otherwise, problems may result.  
❑
❑
Do not use cut or damaged connection cables.  
Your computer will not work with party lines, cannot be connected to  
a coin-operated telephone, and may not work with multiple phone  
lines or a private branch exchange (PBX).  
❑
If the telephone company makes a service call to your home or office  
and determines that your computer is responsible for a problem, the  
telephone company may bill you for the service call. Also, if you do  
not disconnect your computer when it is adversely affecting the  
telephone line, the telephone company has the right to disconnect  
your service until you correct the problem.  
On Moisture Condensation  
If the computer is brought directly from a cold location to a warm one,  
moisture may condense inside your computer. In this case, allow at least  
an hour before turning on your computer. If any problems occur, unplug  
your computer, and contact your Sony Service Center.  
On Handling Diskettes  
❑
Do not open the shutter manually and touch the surface of the  
diskette.  
❑
❑
Keep diskettes away from magnets.  
Keep diskettes away from direct sunlight and other heat sources.  
On Handling CD-ROMs and DVD-ROMs  
❑
❑
Do not touch the surface of the disc.  
Do not drop or bend the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
90 VAIO Notebook Computer User Guide  
On Cleaning CD-ROMs and DVD-ROMs  
❑
Fingerprints and dust on the surface of a disc may cause read errors.  
Proper care of the disc is essential to maintain its reliability. Do not  
use solvents such as benzine, thinner, commercially available cleaners  
or anti-static spray, as they may cause damage to the disc.  
❑
❑
For normal cleaning, hold the disc by its edge and use a soft cloth to  
wipe the surface from the center out.  
If the disc is badly soiled, moisten a soft cloth with water, wring it out  
well, and use it to wipe the surface of the disc from the center out.  
Wipe off any remaining moisture with a dry soft cloth.  
On Using Batteries  
❑
❑
❑
❑
Never leave the battery pack in temperatures above 140° F (60° C),  
such as under direct sunlight or in a car parked in the sun.  
Battery life is shorter in a cold environment. This is due to decreased  
battery efficiency at low temperatures.  
Charge the batteries at temperatures between 50° F and 80° F (10° C  
to 30° C). Lower temperatures require a longer charging time.  
While the battery is in use or being discharged, the battery pack heats  
up. This is normal and is not cause for concern.  
❑
❑
❑
❑
❑
Keep the battery pack away from all sources of heat.  
Keep the battery pack dry.  
Do not open or try to disassemble the battery pack.  
Do not expose the battery pack to any mechanical shock.  
If you are not using the computer for an extended period of time,  
remove the battery pack from the computer to prevent damage to the  
battery.  
❑
If, after fully charging the battery pack, the battery power is still low,  
the battery pack may be reaching the end of its life and should be  
replaced.  
❑
❑
You do not need to discharge the battery before recharging.  
If you have not used the battery pack for a considerable amount of  
time, recharge the battery.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Use  
91  
On Maintenance  
❑
❑
❑
Make sure to disconnect the power cord before cleaning the  
computer.  
Avoid rubbing the LCD screen as this can damage the screen. Use a  
soft, dry cloth to wipe the LCD screen.  
Clean the computer with a soft cloth lightly moistened with a mild  
detergent solution. Do not use any type of abrasive pad, scouring  
powder or solvent, such as alcohol or benzine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
92 VAIO Notebook Computer User Guide  
Adding Memory  
In the future, you may want to install memory modules to expand the  
functionality of your computer. You can increase memory to 192 MB  
(160 MB if you purchased model PCG-F150) by installing optional  
memory modules. To upgrade memory, contact your nearest Sony  
Authorized Service Center. For the location of a service center near  
you, call 1-888-4SONYPC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty Statement  
Notebook Computer Warranty  
The limited warranty on your VAIO Notebook computer covers parts and  
labor against defects in material or workmanship for a period of three  
months from the original date of purchase. You can extend the warranty  
period for an additional nine months by registering your computer. See  
“Registering Your Computer” on page 17. Once you register your  
computer, the limited warranty period is twelve months from the original  
date of purchase.  
There is a separate warranty for the battery included with your computer.  
See “Battery Limited Warranty” on page 97.  
For the purpose of this Limited Warranty “SONY” means SONY ELECTRONICS INC. for Products  
purchased in the United States of America and Sony of Canada Ltd. for Products purchased in Canada.  
SONY warrants this computer hardware product (“the Product”) against defects in material or  
workmanship as follows:  
1. Labor: For a period of ninety (90) calendar days from the original date of purchase from SONY or a  
SONY authorized reseller, SONY will repair defects in material or workmanship in the Product at no  
charge, or pay the associated labor charges to a SONY authorized personal computer service facility. The  
ninety (90) day warranty period is extendible only to the original purchaser, for an additional period of  
nine (9) months, for a total of twelve (12) months from date of purchase when the Product is registered  
electronically prior to the expiry of ninety (90) days from the original date of purchase. After the  
applicable period you must pay for all labor charges.  
2. Parts: For a period of ninety (90) calendar days from the original date of purchase from SONY or a  
SONY authorized reseller, SONY will supply, at no charge, new or rebuilt, at SONY’s option, replacement  
parts in exchange for defective parts. Any replacement parts will be warranted for the remainder of the  
original warranty period or ninety (90) calendar days from installation by SONY’s authorized personal  
computer service facility, whichever is longer. The ninety (90) day warranty period is extendible only to  
the original purchaser, for an additional period of nine (9) months, for a total of twelve (12) months from  
date of purchase when the Product is registered electronically prior to the expiry of ninety (90) days from  
the original date of purchase. All defective parts replaced under this Limited Warranty will become the  
property of SONY.  
This Limited Warranty covers only the hardware components packaged with the Product. It does not  
cover technical assistance for hardware or software usage and it does not cover any software products  
whether or not contained in the Product; SONY excludes all warranties express or implied in respect of  
any software provided with the product and any such software is provided “AS IS” unless expressly  
provided for in any enclosed software limited warranty. Please refer to the End User License Agreements  
included with the Product for your rights and obligations with respect to the software.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
94 VAIO Notebook Computer User Guide  
This Limited Warranty is non-transferable. Proof of purchase in the form of a bill of sale (which is  
evidence that the Product is within the warranty period) must be presented to obtain warranty service. In  
addition, if replacement parts are required and you wish to receive the most expedient service available,  
you will be required to provide SONY with a credit card authorization to bill your credit card in the event  
you fail to return the original parts in the postage-paid envelope we provide. The credit card will only be  
charged for SONY’s list price for the part if the original part has not been returned within thirty (30) days.  
In respect of certain components you may be entitled to express warranty service during the warranty  
period, subject to certain restrictions. Please contact SONY as indicated below for further information.  
With respect to all service provided, it is your responsibility prior to Product service to backup the  
contents of your hard drive, including any data you have stored or software you have installed on the  
hard drive. It is likely that the contents of your hard drive will be lost or reformatted in the course of  
service and SONY will not be responsible for any damage to or loss of any programs, data or other  
information stored on any media or any part of any Product serviced hereunder or any consequential  
damages resulting therefrom.  
IF DURING THE REPAIR OF THE PRODUCT THE CONTENTS OF THE HARD DRIVE ARE ALTERED,  
DELETED, OR IN ANY WAY MODIFIED, SONY IS NOT RESPONSIBLE WHATSOEVER. YOUR  
PRODUCT WILL BE RETURNED TO YOU CONFIGURED AS ORIGINALLY PURCHASED (SUBJECT  
TO AVAILABILITY OF SOFTWARE).  
Be sure to remove all third party hardware, software, features, parts, options, alterations, and attachments  
not warranted by SONY prior to sending the Product to SONY for service. SONY is not liable for any loss  
or damage to these items.  
This Limited Warranty does not cover any consumable items (such as batteries) supplied with this  
Product; cosmetic damages; damage or loss to any software programs, data, or removable storage media;  
or damage due to (1) acts of God, accident, misuse, abuse, negligence, commercial use or modifications of  
this Product; (2) improper operation or maintenance of this Product; (3) connection to improper voltage  
supply; or (4) attempted repair by any party other than a SONY authorized personal computer service  
facility. This Limited Warranty does not apply when the malfunction results from the use of this Product  
in conjunction with accessories, products or ancillary or peripheral equipment, or where it is determined  
by SONY that there is no fault with this Product itself. This Limited Warranty is valid only in the United  
States of America and Canada. This Limited Warranty is invalid if the factory applied serial number has  
been altered or removed from the Product.  
Repair or replacement of defective parts or hardware as provided under this Limited Warranty is the  
exclusive remedy of the consumer. SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING BUT NOT LIMITED TO, LOSS  
OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY  
ASSOCIATED EQUIPMENT, DOWN TIME AND PURCHASER’S TIME. FOR BREACH OF ANY  
EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY OR  
ANY OTHER LEGAL THEORY RELATED TO THIS PRODUCT. EXCEPT TO THE EXTENT  
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE  
DURATION OF THIS WARRANTY.  
Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages,  
or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may  
not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights  
which vary from state to state, or province to province.  
Technical Support: Although technical support is not provided free of charge under this Limited  
Warranty, SONY has established a telephone number for technical support. Charges may apply for  
technical support, unless and to the extent that free technical support for a limited period is provided in  
writing as a feature of your Product. Prior to placing your call, please have available the model and serial  
number for your Product, date of purchase, a list of all options installed in your Product and a detailed  
description of the problem.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty Statement  
95  
For Product support, online knowledge base, frequently asked questions, and free updates via the  
Internet: http:/ / www.sony.com/ pcsupport/  
For Product information, service assistance, resolution of a service problem, or technical assistance, call:  
1-888-4SONYPC (476-6972).  
Save this for future reference.  
© 1998 Sony Electronics Inc. and Sony of Canada Ltd. Reproduction in whole or in part without written  
permission is prohibited. All rights reserved. SONY is a registered trademark of Sony.  
GARANTIE RESTREINTE  
SONY DU CANADA LTÉE (“SONY”) garantit comme suit ce Produit d’ordinateur (“le Produit”) contre  
tous vices de matières premières et de fabrication :  
1. Main-d’oeuvre : Pendant une période de quatre-vingt-dix (90) jours à compter de la date d’achat  
originale chez SONY ou chez un de ses revendeurs autorisés, SONY réparera le Produit à ses frais ou en  
remboursera les frais de main-d’oeuvre au centre de réparation d’ordinateur personnel autorisé SONY.  
La période de garantie de quatre-vingt-dix (90) jours peut être prolongée au bénéfice de l’acheteur  
original pour une période additionnelle de neuf (9) mois, soit un total de douze (12) mois à compter de la  
date d’achat, lorsque le Produit est enregistré électroniquement. Après la période applicable, l’acheteur  
doit payer tous les frais de main-d’oeuvre.  
2. Pièces : Pendant une période de quatre-vingt-dix (90) jours à compter de la date d’achat originale chez  
SONY ou chez un de ses revendeurs autorisés, SONY fournira à ses frais des pièces de rechange neuves  
ou reconstruites, à sa discrétion, en échange des pièces défectueuses. Ces pièces de remplacement seront  
garanties pour le reste de la période originale de garantie ou pour quatre-vingt-dix (90) jours à compter  
de leur installation par un centre de service d’ordinateur personnel autorisé SONY, au plus long des deux  
termes. La période de garantie de quatre-vingt-dix (90) jours peut être prolongée au bénéfice de  
l’acheteur original pour une période additionnelle de neuf (9) mois, soit un total de douze (12) mois à  
compter de la date d’achat, lorsque le Produit est enregistré électroniquement. Toutes les pièces  
défectueuses remplacées au titre de cette garantie restreinte deviennent la propriété de SONY.  
Cette garantie restreinte couvre uniquement les composants physiques emballés avec le Produit. Elle  
n’inclut pas l’assistance technique en rapport avec l’utilisation du matériel ou du logiciel et ne couvre  
aucun logiciel, qu’il soit ou non fourni avec le Produit. Les logiciels sont fournis “TELS QUELS” à moins  
d’être expressément couverts par une autre garantie restreinte spécifique. Veuillez vous reporter aux  
Contrats de licence d’utilisation accompagnant le Produit quant à vos obligations en rapport avec les  
logiciels.  
Cette garantie restreinte est incessible.  
Pour vous prévaloir du service au titre de la garantie, vous devrez présenter une preuve d’achat sous  
forme de facture de vente attestant que le Produit est couvert par la garantie en vigueur. Par ailleurs, si  
des pièces doivent être remplacées et que vous désirez obtenir le service le plus rapide possible, vous  
devrez fournir à SONY une autorisation lui permettant d’en porter le montant à votre carte de crédit  
advenant que vous négligiez de retourner les pièces originales dans l’enveloppe affranchie qui vous est  
fournie. Seul le prix courant de SONY pour cette pièce sera porté à votre carte de crédit si la pièce ne lui  
est pas retournée dans un délai de trente (30) jours.  
Vous pouvez avoir droit au service de garantie exprès durant la période de garantie, sous réserve de  
certaines restrictions. Pour tout renseignement, veuillez communiquer avec SONY de la façon indiquée  
ci-après.  
Vous avez l’entière responsabilité de faire une copie de sauvegarde du contenu du disque dur, incluant  
toute donnée en mémoire ou tout logiciel que vous y avez installé. Il est fort probable que le contenu du  
disque dur sera reformaté ou perdu en cours de service et SONY ne pourra être tenue responsable  
d’aucun dommage ni de la perte des programmes, des données ou de toute autre information gardée en  
mémoire sur tout support d’information ou sur toute partie de tout Produit en réparation.  
SI, DURANT LA RÉPARATION DU PRODUIT, LE CONTENU DU DISQUE DUR EST ALTÉRÉ,  
SUPPRIMÉ OU MODIFIÉ, SONY N’EN SERA AUCUNEMENT RESPONSABLE. LE PRODUIT VOUS  
SERA RETOURNÉ TEL QU’IL ÉTAIT CONFIGURÉ QUAND VOUS L’AVEZ ACHETÉ (SOUS RÉSERVE  
DE LA DISPONIBILITÉ DU LOGICIEL).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
96 VAIO Notebook Computer User Guide  
Avant d’envoyer le Produit à SONY pour le faire réparer, assurez-vous d’en retirer tous produits de tierce  
partie, logiciels, caractéristiques, pièces, options, altérations et accessoires non garantis par SONY car  
SONY n’est pas responsable de la perte ou de l’endommagement de ces articles.  
Cette garantie restreinte exclut les articles consommables (comme les batteries) fournis avec le Produit ;  
les dommages cosmétiques ; l’endommagement ou la perte des logiciels, données et supports  
informatiques amovibles ; les dommages dus à 1) un cas fortuit, un accident, une mauvaise utilisation, un  
abus, une négligence, une utilisation commerciale ou une modification du Produit ; 2) l’utilisation ou  
l’entretien incorrect du Produit ; 3) le branchement à une source électrique non conforme ; ou 4) toute  
tentative de réparation par tout autre qu’un centre de service d’ordinateur personnel autorisé SONY.  
Cette garantie restreinte ne s’applique pas si la défectuosité est causée par l’utilisation du Produit en  
conjonction avec des accessoires, articles ou équipements périphériques ou connexes, ou si SONY  
détermine que le Produit lui-même ne comporte aucun défaut. Cette garantie restreinte n’est valide qu’au  
Canada.  
Cette garantie restreinte est nulle si le numéro de série appliqué en usine a été modifié ou enlevé du  
Produit.  
La réparation ou le remplacement du matériel ou des pièces défectueuses tel que prévu au titre de cette  
garantie est le seul recours de l’acheteur. SONY NE SERA AUCUNEMENT RESPONSABLE DE TOUT  
DOMMAGE INDIRECT OU CONSÉCUTIF POUR DÉROGATION À TOUTE GARANTIE EXPRESSE  
OU TACITE, RUPTURE DE CONTRAT, NÉGLIGENCE, RESPONSABILITÉ STRICTE OU TOUTE  
AUTRE THÉORIE JURIDIQUE EN RAPPORT AVEC CE PRODUIT. DE TELS DOMMAGES INCLUENT,  
ENTRE AUTRES, LE TEMPS DE L’ACHETEUR, LA PERTE DE PRODUCTIVITÉ, DE REVENUS ET DE  
PROFITS, ET LA PERTE DE DONNÉES OU D’UTILISATION DU PRODUIT OU DE TOUT  
ÉQUIPEMENT CONNEXE. SAUF DANS LA LIMITE OÙ LA LOI APPLICABLE L’INTERDIT, TOUTE  
GARANTIE TACITE DE VALEUR MARCHANDE OU DE CONVENANCE À UNE FIN PARTICULIÈRE  
DE CE PRODUIT EST RESTREINTE DANS SA DURÉE À LA DURÉE DE CETTE GARANTIE.  
Certaines provinces ne permettent pas l’exclusion ou la restriction des dommages accidentels ou indirects  
et n’admettent pas de limites quant à la durée d’une garantie tacite, de sorte que les exclusions/  
restrictions exprimées ci-dessus peuvent ne pas s’appliquer. Cette garantie vous donne des droits  
spécifiques et vous pouvez en avoir d’autres qui varient selon la province.  
Soutien technique : Bien que le soutien technique ne soit pas offert gratuitement au titre de cette garantie  
restreinte, SONY a prévu une ligne téléphonique à cet effet. Des frais peuvent être exigés à moins que le  
soutien technique gratuit et temporaire ne soit expressément indiqué par écrit comme caractéristique de  
votre Produit. Avant de placer l’appel, assurez-vous d’avoir les numéros de modèle et de série du  
Produit, la date d’achat, la liste des options qui y sont installées et une description détaillée du problème.  
Vous trouverez sur l’Internet un appui direct, une base de renseignements, une foire aux questions et des  
mises à jour gratuites sous http:/ / www.sony.com/ pcsupport/  
Pour de l’information sur les produits, de l’aide avec le service, la résolution de problèmes de service ou  
pour une aide technique, veuillez composer le 1-888-4SONYPC (476-6972).  
À conserver pour référence future.  
©1998 Sony du Canada Ltée. Reproduction partielle ou complète interdite sans autorisation écrite  
préalable. Tous droits réservés. SONY est une marque déposée de Sony.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty Statement  
97  
Battery Limited Warranty  
The limited warranty on the battery included with your Sony VAIO  
Notebook Computer covers defects in material or workmanship for a  
period of 30 days from the original date of purchase. This warranty is not  
extendible.  
For the purposes of this Limited Warranty, “SONY” means Sony Electronics Inc. for Products purchased  
in the United States of America and Sony of Canada Ltd. for Products purchased in Canada. Sony  
warrants this Product against defects in material or workmanship for thirty (30) days from your purchase  
date. If this Product is determined to be defective, SONY will replace the Product at no charge to you.  
This Limited Warranty contains your exclusive remedy. SONY shall not be liable for any incidental or  
consequential damages for breach of any express or implied warranty on this product. Some states and  
provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation or exclusion may not apply to you. This warranty gives you specific legal rights which vary  
from state to state or province to province. For information on obtaining warranty service, please call  
SONY at 1-888-4SONYPC (1-888-476-6972).  
GARANTIE RESTREINTE  
Au titre de cette garantie restreinte, “SONY” signifie Sony du Canada Ltée pour les produits achetés au  
Canada et Sony Electronics Inc. pour les produits achetés aux États-Unis. SONY garantit ce produit contre  
tous vices de matières premières et de fabrication pour trente (30) jours à compter de la date d’achat. Si ce  
produit est reconnu défectueux, SONY le remplacera à ses frais. Cette garantie restreinte est votre seul  
recours. SONY ne sera aucunement responsable de tout dommage indirect ou consécutif pour dérogation  
à toute garantie tacite ou expresse sur ce produit. Certaines provinces ne permettent pas l’exclusion ou la  
restriction des dommages accidentels ou indirects, de sorte que les exclusions/ restrictions exprimées ci-  
dessus peuvent ne pas s’appliquer. Cette garantie vous donne des droits spécifiques et vous pouvez en  
avoir d’autres qui varient selon la province. Pour de l’information sur le service au titre de la garantie,  
veuillez appeler Sony au 1-888-4SONYPC (1-888-476-6972).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
brightness  
adjusting 14, 22  
built-in speakers 5  
See also speakers 22  
buttons  
A
About This Computer tab 58  
AC adapter 5, 9  
AC power 9  
AC Profile power setting 59  
accessing online support 16  
adding  
Eject 27, 28  
Finish 16  
left 5  
hardware 41  
right 5  
memory 92  
Start (Windows 98) 15, 57  
peripherals 41  
printers 47  
adjusting  
C
cables  
brightness 14, 22  
contrast 22  
phone 5  
power cord 9  
cameras  
air circulation 88  
Alt key 19  
digital video recorder 55  
Sony Digital Still 54  
canceling commands 19  
Caps Lock 5  
Application Recovery CD 86  
Applications key 19  
attaching port replicator 44  
Audio tab 58  
indicator light 21  
CD-ROM/ DVD-ROM discs  
cleaning 90  
B
Basic/ Advanced tab 58  
battery packs 5, 10, 90  
charge status icons 63  
charging 11, 37  
ejecting 28  
handling 89, 90  
inserting 27  
troubleshooting 77  
CD-ROM/ DVD-ROM drive  
closing tray 28  
opening tray 27  
using 27  
indicator light status 11  
indicator lights 5, 11, 21, 36  
inserting 10  
inserting into battery bay 10  
loading 10  
charge status indicator light 11  
charging battery packs 11, 37  
choosing  
power status 11  
rechargeable 9  
removing 12, 36, 37  
BatteryScope utility 62, 64  
power source 10  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100 VAIO Notebook Computer User Guide  
cleaning computer 88  
coin-operated telephones 42  
computer 73  
network 43  
Printer 7, 47  
printer 47  
cleaning 88  
condensation 89  
Serial port 43  
USB 7, 43  
customizing 57  
lithium ion battery v  
setting up 5  
setup screen 57  
starting 14  
contrast  
adjusting 22  
correction keys 18, 19  
Ctrl key 19  
cursor-movement keys 19  
customer assistance  
support options 73  
customizing your computer 57  
troubleshooting 75, 76, 77  
connecting  
coin-operated telephones 42  
digital still camera 54  
digital video recorder 55  
external keyboard 43, 51  
external mouse 51  
external speakers 52  
hard drives 29  
D
DC In 9, 43  
digital still camera 32  
connecting 54  
digital video camera 55  
disconnecting port replicator 46  
diskettes  
keyboard 51  
microphone 53  
monitor 43, 48  
ejecting 25  
mouse 43  
handling 89  
multimedia computer display 49  
multiple phone lines 42  
network 29, 43  
inserting into drive 25  
troubleshooting 78  
display  
party phone lines 42  
PBX 42  
dual display 71  
mode 65  
phone line 42  
options 50  
port replicator 43, 44  
power source 9  
See also monitor  
selecting 50  
printer 47  
projector 50  
disposal of lithium ion battery v  
drives  
serial device 54  
floppy disk 5  
USB device 56  
weight saver 38  
connectors  
installing additional hard disk 29  
dual display function 71  
DV In/ Out 55  
DC In 9, 43  
headphone 6  
i.LINK 6  
infrared 32  
keyboard 5, 7, 43  
Line In 6  
DVD-ROM drive tray  
troubleshooting 77  
DVD-ROM/ CD-ROM discs  
troubleshooting 77  
E
microphone 6  
monitor 43  
mouse 7, 43  
Eject button 25, 27, 28  
ejecting  
battery packs 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
101  
CD-ROM/ DVD-ROM discs 28  
diskettes 25  
Mouseware 24  
help 73  
weight saver 39  
I
electronic  
documentation 73  
Enable Ports tab 58  
ergonomic considerations 2, 3  
Escape key 18  
i.LINK 6, 55  
IEEE 1394 55  
indicator lights 21  
battery 5, 11, 21, 36  
Express Service technical support 17  
external devices  
Caps Lock 5, 21  
charge status 11  
hard drive 5, 21  
Num Lock 5, 21  
power 5  
display 3, 50  
See also monitor  
keyboard 51  
mouse 51  
Scroll Lock 5, 21  
speakers 22, 52  
infrared communication devices 32  
other computers 32  
infrared port 32  
F
faxes  
infrared transmission  
active distance 33  
troubleshooting 33  
input devices iv  
laws governing v  
Finish button 16  
floppy disk drive 5  
cable 5  
Insert key 19  
disconnecting 26  
troubleshooting 78  
Fn 23  
Fn key 19  
combination commands 22  
function keys 18, 19  
inserting  
battery pack 10  
CD-ROM/ DVD-ROM discs 27  
diskettes into drive 25  
installing  
hard drives 29  
hardware 41  
G
memory 92  
glare 2  
peripherals 41  
interference iv, 88  
internal microphone 7  
internal speakers  
See speakers  
H
handling  
audio CDs 90  
CD-ROM/ DVD-ROM discs 89, 90  
diskettes 89  
K
hard drives  
Kensington Security Cable Lock 6  
keyboard 19, 43  
connecting 51  
indicator light 5, 21  
installing additional 29  
hardware  
connector 5, 7, 51  
online support 73  
headphone 5  
connector 6  
L
LCD 87  
headphones 49  
Help  
lock lever 14  
reducing glare 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
102 VAIO Notebook Computer User Guide  
selecting to display output 50  
troubleshooting 76  
Mouse Properties screen 24  
Mouseware  
accessing help 24  
features 24  
multimedia computer display 49  
multiple phone lines 42  
left button 5  
lever  
LCD 14  
weight saver release 37  
lighting 2  
N
Limited Warranty 93  
Limited Warranty card 17  
Line In 6  
navigation keys 18, 19  
network  
Liquid Crystal Display screen  
See LCD  
connecting 29  
connector 43  
lithium ion battery  
disposal v  
safety precautions v  
loading  
port replicator 43  
Notebook Computer 5  
Notebook Setup tabs 58  
Num Lock 5  
battery pack 10  
location for computer 2  
lock 6  
indicator light 21  
numeric keypad area 18  
O
online  
M
maintenance 88, 91  
Maximum Battery Life power setting  
59  
help 73  
opening  
CD_ROM/ DVD-ROM drive tray  
27  
operator keys 19  
output devices iv  
adding 47  
Maximum Performance power setting  
59  
memory module  
installing 92  
microphone 6  
connecting 53  
connector 49  
P
party phone lines 42  
internal 7  
PBX 42  
troubleshooting 79  
modem  
laws governing v  
troubleshooting 79  
moisture condensation 89  
monitor 7, 43  
PC card  
inserting 29  
release button 29  
removing 31  
slot protector 30  
slots 29  
connecting 48  
connector 49  
troubleshooting 81  
Type III 29  
selecting 50  
phone  
switching among 22  
mouse  
cable 5  
connecting line 42  
jack 42  
connecting 51  
connector 7  
troubleshooting 79  
laws governing v  
port replicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
103  
connecting 43, 44  
disconnecting 46  
lever 46  
recharging battery packs 11  
Recovery CD 86  
registering  
network 43  
power 21  
Windows 98 16  
your computer 17  
regulatory information iii  
removing  
battery packs 12  
diskettes 25  
floppy disk drive 26  
replacing  
cord 9  
indicator light 5  
switch 6, 14  
power management  
settings 59  
Power Management Off power setting  
59  
battery packs 36  
restoring data 86  
right button 5  
Power On  
Device Sequence tab 58  
Password tab 58  
power saving modes 34  
System Hibernation 22, 35  
System Idle 23, 34  
System Suspend 35  
Video Standby 23  
power setting  
S
screen  
See LCD  
Scroll Lock 5  
indicator light 21  
second battery pack 10, 36  
selecting  
AC Profile 59  
Maximum Battery Life 59  
Maximum Performance 59  
Power Management Off 59  
System Hibernation 60  
System Suspend 60  
Video Standby 60  
power sources 10, 87  
connecting 9  
display 50  
LCD 50  
monitor 50  
power source 10  
Serial connector 43, 54  
serial devices  
connecting 54  
digital still camera 54  
setting up  
PowerPanel  
activating 61  
customizing toolbar 59, 60  
precautions 88  
Windows 98 16  
setting up your PC  
support 73  
Print Screen key 19  
printer 7  
setup screen  
About This Computer tab 58  
Audio tab 58  
Basic/ Advanced tab 58  
displaying 57  
Enable Ports tab 58  
Power On Device Sequence tab 58  
Power On Password tab 58  
Printer tab 58  
connecting 43, 47  
connector 47  
port 47  
Printer connector 7, 43, 47  
Printer tab 58  
projector 50  
R
Touchpad tab 58  
radio interference iv, 88  
rechargeable battery packs 9, 10  
setup tabs 58  
Shift key 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
104 VAIO Notebook Computer User Guide  
Shut Down Windows dialog box 15  
Sony Customer Support 74  
Sony Fax-on-Demand service 74  
Sony Notebook Setup screen 57  
speakers 5  
weight saver  
attaching 36  
connecting 38  
fold-out arm 38  
removing 39  
built-in 5  
Windows 98  
external 52  
switching 22  
troubleshooting 78  
volume 22  
Certificate of Authenticity 16  
Control Panel 33  
Explorer 20  
Find window 20  
Finish button 16  
help 20  
Start button 15, 57  
starting  
computer 14  
key 19  
startup problems 15  
switching  
key combinations 20  
License Agreement 16  
registering 16  
display 22  
monitor 22  
setup 16  
System Hibernation mode 22, 35, 60  
System Idle mode 23, 34  
System Suspend mode 22, 35, 60  
Setup Wizard screen 16  
Start button 15  
taskbar 15, 76  
T
technical support  
support options 73  
touchpad 5, 24  
Touchpad tab 58  
troubleshooting 75  
startup 15, 75  
turning on  
computer 14  
TV  
interference iv, 88  
U
USB  
connecting 56  
connector 7, 43, 56  
mouse 56  
V
ventilation 88  
video camera 55  
Video Standby mode 23  
W
warranty 17, 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Air Cleaner FU W53J User Manual
Soleus Air Air Conditioner PE8 12R 32 User Manual
Sony Camcorder BKM V10 User Manual
Sony Camera Lens VAD S70 User Manual
Sony DVD VCR Combo SLV D980P User Manual
Sony Home Theater System 4 165 481 111 User Manual
Sony Speaker SS S3 User Manual
Sony VCR GV D800E User Manual
Sunbeam Water Dispenser WF5700 User Manual
Tanaka Drill T277487 User Manual