Sony Laptop P C V E 5 1 M User Manual

User Guide  
Personal Computer  
V G C - V A 1 ( P C V - E 5 1 M )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Before Use  
Documentation  
Your documentation includes printed information and user guides to read on your VAIO computer.  
Guides are provided in PDF format, which you can easily browse through and print out.  
The My Club VAIO portal is a perfect starting point to use your computer — a comprehensive collection of everything you  
need to get the most from your computer.  
The user guides are collected under Documentation, which can be shown as follows:  
1
2
3
Click Start and then the My Club VAIO icon  
Click Documentation.  
.
Select the guide you want to read.  
You can manually browse to the user guides by going to My Computer > VAIO (C:) (your C drive) > Documentation > Documentation and opening the  
folder for your language.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Before Use  
Printed Documentation  
A Setting Up Poster — Describes the process from unpacking to starting up your VAIO.  
Troubleshooting Guide — Contains solutions to common problems.  
Recovery Guide — Contains an explanation of how to recover your computer's system if you need to.  
Booklets containing the following information: Sony Guarantee conditions, Safety Regulations, Modem Regulations  
and Wireless LAN Regulations.  
Non-printed Documentation  
User Guide (this manual) — Contains features of your computer. It also includes information about the software  
programs included with your computer, as well as information on solving common problems.  
Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer.  
To view the online Specifications:  
1
2
Connect to the Internet.  
Go to the Sony VAIO-Link online support Web site at http://www.vaio-link.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Before Use  
My Club VAIO  
In My Club VAIO you can find:  
Documentation, which gives you:  
Access to the User Guide. This manual explains the features of your computer in detail, how to use these features  
confidently and safely, connect peripheral devices and more.  
Access to Help and Training. This is the portal of VAIO Help and Support Center.  
Important information about your computer, in the form of notices and announcements.  
In My Club VAIO you can also find:  
Accessories  
Want to expand the capabilities of your computer? Click on this icon and have a look at your compatible accessories.  
Software  
Feeling creative? Click this icon for an overview of your software and check out our upgrade options.  
Wallpapers  
Click this icon and check out our most popular Sony and Club VAIO wallpapers.  
Links  
Click this icon and check out our most popular Sony and Club VAIO web sites.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Before Use  
Help and Support Center  
Help and Support Center is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn  
to use Microsoft Windows XP and your computer.  
Use the Search feature, Index, or table of contents to view all Windows Help resources, including those that are on the  
Internet.  
To access Help and Support Center, click Start and then Help and Support. Or go to the Help and Support Center by  
pressing the Microsoft Windows key  
and the F1 key.  
Further Sources  
Consult the Online Help files of the software you are using for detailed information on features and troubleshooting.  
Go to www.club-vaio.com to find online tutorials about your favorite VAIO software.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Before Use  
Ergonomic Considerations  
Whenever possible, you should attempt to take account of the following ergonomic considerations:  
Position of your computer – Place the display directly in front of you (1). Keep your forearms horizontal (2), with your  
wrists in a neutral, comfortable position (3) while using the keyboard, pointing device, or external mouse. Let your upper  
arms hang naturally at your sides. Have breaks during sessions with your computer. Excessive use of the computer may  
strain muscles or tendons.  
Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the  
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning  
far backwards.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Before Use  
Viewing angle of the display – Use the display's tilting feature to find the best position. You can reduce eye strain and  
muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well.  
Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect  
lighting to avoid bright spots on the display. You can also purchase accessories for your display that help reduce glare.  
Proper lighting adds to your comfort and work effectiveness.  
Ventilation – Make sure you leave at least 25 cm of space behind and on each side of the main unit.  
!
When you lift the computer, grasp the computer on both sides, holding the bottom edges firmly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9
Getting Started  
Getting Started  
This section describes how to get started with using your VAIO computer.  
Locating Controls and Ports (page 10)  
About the Indicator Lights (page 13)  
Connecting the Power Cord (page 14)  
Shutting Down Your Computer Safely (page 15)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Getting Started  
Locating Controls and Ports  
Take a moment to identify the controls and ports shown on the following pages.  
Front  
A Power indicator (page 13)  
B Drive indicator (page 13)  
C MONITOR OFF indicator (page 13)  
D MONITOR OFF button for turning off the display output and the  
speaker volume.  
E Brightness buttons for increasing (+) or decreasing (-) the  
screen brightness.  
F LAMP ON/OFF switch for turning on and off all the indicator  
lights on the computer.  
G SM/xD-Picture Card slot (page 55)  
®
H CF (CompactFlash ) memory card slot (page 55)  
I Stereo speakers  
J Manual eject hole (page 128)  
K Optical disc drive (page 27)  
L Drive eject button (page 27)  
M SD memory card slot (page 55)  
*
N Memory Stick slot (page 49)  
O Media Access indicator (page 13)  
*
Your computer supports Memory Stick Duo and Memory Stick Pro high  
speed and high capacity capabilities.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
11  
Getting Started  
Right  
A Power button  
*
B Hi-Speed USB (USB 2.0) port (page 69)  
®
C i.LINK (IEEE1394) S400 port (page 72)  
D AC Input port (page 14)  
*
Supports high-/full-/low- speeds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
12  
Getting Started  
Left  
A Composite Audio In connectors (page 37)  
B Composite Video In connector for connecting a cable or  
satellite set-top box (STB) without the S Video Out connector.  
C S Video In connector (page 37)  
D VHF/UHF port (page 33)  
E PC Card slot (page 47)  
F WIRELESS LAN indicator (page 59)  
G WIRELESS LAN switch (page 59)  
H CONNECT button (page 17), (page 22)  
I Network (Ethernet) port (page 74)  
J Modem port (page 58)  
K S/PDIF Optical Out port for connecting digital equipment such  
as an AV amplifier.  
L Line In connector for connecting audio equipment.  
M Microphone connector (page 68)  
N Headphones connector  
*
O Hi-Speed USB (USB 2.0) ports (page 69)  
*
Support high-/full-/low- speeds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Getting Started  
About the Indicator Lights  
Your computer is equipped with the following indicator lights.  
Indicator  
Functions  
Power 1  
Illuminates in green when the power of the computer is on, illuminates in orange when the computer is in  
Standby mode, and turns off when the computer is in Hibernate mode or off.  
Media Access  
Illuminates when data is read from or written to a memory card. (Do not enter Standby mode or turn  
off the computer when this indicator is on.) When the indicator is off, the memory card is not being used.  
MONITOR OFF  
Illuminates in orange when the display output and the speaker volume are turned off.  
Illuminates when data is read from or written to the hard disk or optical disc drive. Do not enter Standby mode  
or turn off the computer when this indicator is on.  
Drive  
WIRELESS LAN  
Illuminates when the wireless LAN function is running.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
14  
Getting Started  
Connecting the Power Cord  
Your computer's power cord must be plugged into an AC power source, such as an AC wall outlet, surge protector, or  
Uninterruptible Power Supply (UPS), before you can establish communication with your wireless keyboard and wireless  
mouse.  
!
Use only the power cord supplied with the computer.  
To connect the power cord  
1
2
Insert the power cord into the AC In port (1) on the right of the computer.  
Insert the power cord plug into a grounded AC wall outlet, surge protector, or Universal Power Supply (UPS) (2).  
To disconnect the computer completely from AC power, unplug the power cord.  
Make sure that the AC outlet is easily accessible.  
If you are interrupted and need to leave your computer suddenly, place the  
computer into Hibernate mode. See Using Hibernate Mode (page 83). This  
power saving mode saves the time of shutting down or resuming.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
15  
Getting Started  
Shutting Down Your Computer Safely  
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.  
To shut down your computer  
1
2
Turn off any peripherals connected to the computer.  
Click Start and then Turn Off Computer.  
The Turn off computer window appears.  
3
4
Click Turn Off.  
Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off  
automatically.  
The power indicator light turns off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
16  
Using Your VAIO Computer  
Using Your VAIO Computer  
This section describes how to get the most out of using your computer.  
Using the Keyboard (page 17)  
Using the Mouse (page 22)  
Using the Optical Disc Drive (page 27)  
Using the TV Function (page 33)  
Using PC Cards (page 47)  
Using a Memory Stick (page 49)  
Using Other Memory Cards (page 55)  
Using the Internet (page 58)  
Using Wireless LAN (WLAN) (page 59)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
17  
Using Your VAIO Computer  
Using the Keyboard  
Your computer is supplied with a wireless keyboard. The wireless keyboard uses a standard key arrangement with additional  
keys that perform specific functions.  
E Standby button  
Provides for the lowest level of power consumption.  
For details on power management, see Using the Power  
Saving Modes (page 81).  
HEADPHONES  
F POWER switch  
Slide the POWER switch to turn on and off the wireless  
keyboard.  
G Indicators  
(Battery):  
appears while the AA batteries for the  
keyboard are sufficient and switches to  
batteries wear out.  
when the  
(Num lock): Appears while in the Num Lock state.  
(Caps lock): Appears while in the Caps Lock state.  
(Scroll lock): Appears while in the Scroll Lock state.  
The above illustration may appear different from your model.  
(Connect): Appears while connection between the computer  
and the keyboard is in place to indicate that the keyboard is  
ready for use (page 20).  
A Function keys  
H Windows key  
Perform certain tasks. The task associated with each function key  
varies among software applications.  
Displays the Start menu.  
I Applications key  
B Mute button  
Displays a shortcut menu in certain software applications.  
Turns the volume on and off.  
J Direction arrows  
C Volume control buttons  
Move the pointer on the computer screen.  
Increases (+) or decreases (-) the volume.  
K Pointing device  
D Shortcut buttons  
Launch the pre-assigned software.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
18  
Using Your VAIO Computer  
A Keyboard feet  
Extend to adjust the keyboard height.  
B CONNECT button  
Press to enable the keyboard to communicate with the main  
unit.  
POINTING DEVICE  
C Battery compartment  
Storage compartment for the AA batteries.  
D Pointing device switch  
Slide the switch to turn the pointing device on and off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
19  
Using Your VAIO Computer  
Before You Use the Keyboard  
Four AA alkaline batteries are supplied with your computer for use in the wireless keyboard. Before attempting to use the  
wireless keyboard, you must install the batteries and establish communication between the computer and the keyboard. To  
connect your wireless keyboard, it must be located within a range of approximately 30 cm from the computer.  
!
To maintain good communication, operate the wireless keyboard within the distance limitation of keyboard: approximately 10 m from the computer.  
Confirm that the supplied AA batteries are properly installed.  
Press the CONNECT button located on the left of the computer first, and then press the CONNECT button on the bottom of the keyboard.  
Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near the wireless keyboard. These devices may cause  
interference, causing the keyboard to stop working properly.  
Do not place metal furniture near the computer or wireless keyboard, as this may create interference, causing the keyboard to stop working properly.  
Do not mix old (used) and new batteries when replacing batteries in the wireless keyboard. Always use the same type and manufacture of battery.  
Do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the keyboard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
20  
Using Your VAIO Computer  
To connect the wireless keyboard  
1
2
3
4
5
Insert the supplied four AA batteries (1) into the battery compartment on the bottom of the wireless keyboard.  
Turn on the computer.  
Slide the POWER switch (2) at the top of the keyboard to turn on the keyboard.  
Press the CONNECT button (3) on the left of the computer.  
Press the CONNECT button (4) on the bottom of the keyboard.  
The connect indicator  
appears in the LCD window on the keyboard when connection is established between the  
computer and the keyboard. If not, repeat the procedure.  
!
Steps 4 and 5 must be completed within 10 seconds of each other.  
If the wireless keyboard is left unused for 20 minutes or more, the connect indicator  
will turn off. This could indicate that the connection between  
the computer and the keyboard is lost. Press the Fn key to check that the connect indicator turns on before using the keyboard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
21  
Using Your VAIO Computer  
You can check the battery indicator (  
or  
) in the LCD window on the keyboard for its battery power level.  
If the wireless keyboard does not operate properly, the batteries may need to be replaced. If the wireless keyboard is not being used for an extended  
period of time, remove the batteries to avoid possible damage from battery leakage.  
If you want to put the keyboard in a more 'ergonomical' position, open the keyboard feet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22  
Using Your VAIO Computer  
Using the Mouse  
Your computer is supplied with a wireless optical mouse, which has no cables to plug in and uses a light-emitting diode (LED)  
instead of a ball.  
A Left button  
Click or double-click the left button to select items. To drag and  
drop items, hold the left button down while sliding the mouse,  
then release the button to drop the item.  
B Central wheel  
Rotate the central wheel to scroll up or down a page. Press the  
wheel once to lock the scroll action and control the movement  
by moving the entire mouse (the scroll function is available only  
with applications that support it).  
C Right button  
Press the right button once to display a context-sensitive  
shortcut menu (not always an active function).  
D Power switch  
Slide the switch to turn the mouse on and off. This will help you  
save battery power.  
E CONNECT button  
Press to enable communication between the computer and the  
wireless mouse.  
F Battery indicator  
Blinks when the mouse batteries are running out of power.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
23  
Using Your VAIO Computer  
Before You Use the Mouse  
Two AA alkaline batteries are supplied with your computer for use in the wireless mouse. Before using the wireless mouse,  
you must install the batteries and establish communication between your computer and the mouse. To connect the wireless  
mouse, it must be located within a range of approximately 30 cm from the computer.  
!
To maintain good communication, operate the wireless mouse within the distance limitations of the mouse: approximately 10 m from the computer.  
Confirm that the supplied AA batteries are properly installed.  
Press the CONNECT button located on the left of the computer first, and then press the CONNECT button on the bottom of the mouse.  
Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near the wireless mouse. These devices may cause  
interference, causing the mouse to stop working properly.  
Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns.  
Avoid surfaces such as mirrors, smooth glass, or magazines that have half- tone printing.  
Do not place metal furniture near the computer or wireless mouse, as this may create interference, causing the mouse to stop working properly.  
Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery.  
Do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the mouse.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24  
Using Your VAIO Computer  
To connect the wireless mouse  
1
Insert the two AA batteries (supplied with your computer) into the wireless mouse as shown below.  
2
3
Turn on the computer.  
Press the CONNECT button (1) on the left of the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
25  
Using Your VAIO Computer  
4
Turn over the wireless mouse, slide the power switch to the ON position, and press the CONNECT button.  
Communication between the wireless mouse and the computer should now be established.  
!
Steps 3 and 4 must be completed within 10 seconds of each other.  
If the wireless mouse does not operate properly, the batteries may need to be replaced. If the wireless mouse is not being used for an extended period  
of time, remove the batteries to avoid possible damage from battery leakage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
26  
Using Your VAIO Computer  
Adjusting the Mouse Functions  
1
2
3
Click Start and then Control Panel.  
Click Printers and Other Hardware.  
Click Mouse.  
The Mouse Properties window appears.  
4
Change the settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
27  
Using Your VAIO Computer  
Using the Optical Disc Drive  
Your computer is equipped with an optical disc drive.  
To insert a disc  
1
2
Turn on the computer.  
Press the drive eject button (1) to open the drive.  
The tray slides out.  
3
Place a disc in the middle of the tray with the label side facing up and gently push until the disc clicks into place.  
4 Close the tray by pushing it in gently.  
Do not remove the optical disc when the computer is in a power saving mode (Standby or  
Hibernate). Doing so may cause the computer to malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
28  
Using Your VAIO Computer  
Reading and Writing CDs and DVDs  
Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the  
type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive  
supports.  
Optical disc drive  
CD-ROM  
Plays  
Records to  
CD, CD-R, and CD-RW  
DVD-ROM  
CD, CD-R, CD-RW, DVD and most DVD-R, DVD-RW,  
DVD+R, DVD+RW and DVD+R DL (Double Layer)  
CD-RW/DVD-ROM  
DVD RW  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer) and DVD+RW  
CD-R and CD-RW  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer) and DVD+RW  
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,  
DVD+R DL (Double Layer) and DVD+RW  
!
This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two  
sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Please be aware that the audio side  
(non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.  
!
Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices  
on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee  
the compatibility of VAIO CD drives with discs that not compliant with the official "CD" format standard (or "DVD" standard in relation to DVD drives).  
USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE TO YOUR VAIO PC OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.  
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
29  
Using Your VAIO Computer  
Supports writing to DVD-RW discs compliant with DVD-RW version 1.1/1.2.  
Supports writing to DVD-R discs compliant with DVD-R for General version 2.0/2.1.  
Supports 8cm disc reading, but does not support 8cm disc writing.  
Writing to DVD+R DL (Double Layer) discs is available only on discs supporting DVD+R DL (Double Layer) recording.  
Notes on writing data onto a disc  
To make the data on a disc readable on an optical disc drive, you need to close the session when you eject it. To complete  
this process, follow the instructions included with your software.  
Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc  
drive.  
Do not strike or shake the computer while writing data onto a disc.  
Deactivate the screen saver and exit anti-virus software before writing data onto a disc.  
Do not use memory-resident utility software while writing data to a disc. This may cause the computer to malfunction.  
When using your software application to burn discs, make sure you exit and close all other applications.  
Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing errors.  
Do not switch power modes while using the pre-installed software and while using the CD burning software.  
Never put stickers on discs. This will affect the use of the disc irreparably.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
30  
Using Your VAIO Computer  
Notes on playing DVDs  
To achieve optimum performance when playing DVDs, you should follow these recommendations.  
Close all open applications before playing a DVD movie.  
Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause the computer  
to malfunction.  
Deactivate the screen saver and exit anti-virus software before playing a disc.  
Some discs recorded at 20 or 24 bits may produce noise while playing. If you have audio devices connected, this may  
damage your hearing and the speakers. Reduce the volume before playing a DVD.  
Do not switch power saving modes while the computer is playing a DVD.  
Region code indicators are labeled on the DVDs to indicate in which region and on what type of player you can play the  
disc. If the DVD is labeled "all," this means that you can play this DVD in most regions of the world. If the region code of  
your residence area is different from the label on the DVD disc or on the packaging, you cannot play the disc on this  
player.  
Playing CDs  
To play an audio CD  
1
2
Insert the disc into the optical disc drive.  
If nothing appears on the desktop once you insert an audio CD disc, then click Start, point to All Programs, and click to  
open a CD program, such as the SonicStage software.  
If the Audio CD window appears, click to select an option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
31  
Using Your VAIO Computer  
Copying Files to CDs  
To determine which type of CD your computer supports, see Reading and Writing CDs and DVDs (page 28).  
To copy files to a CD-RW or CD-R  
!
Do not strike or shake the computer while writing data onto a disc.  
1
Insert a blank CD-R or CD-RW disc into the optical disc drive.  
If the CD Drive window appears, click Take no action.  
2
3
Open Windows Explorer by pressing the Windows key and the E key simultaneously.  
In the Folders panel on the left, locate the file(s) or folder(s) you want to copy and either:  
*
Right-click the file(s) or folder(s), point to Send To, and click the optical disc drive name.  
Drag the file(s) or folder(s) onto the optical disc drive icon in the Files Stored on This Computer panel.  
4
5
6
Close Windows Explorer.  
Click Start and then My Computer.  
Click the optical disc drive icon under Devices with Removable Storage. A new window appears with the file(s) or  
folder(s) you want to copy listed under Files Ready to Be Written to the CD.  
7
8
*
In the CD Writing Tasks box, click Write these files to CD.  
Follow the instructions in the CD Writing Wizard.  
The read/write drive letter designation may vary, depending on your system's hardware configuration.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
32  
Using Your VAIO Computer  
Playing DVDs  
To play a DVD  
1
2
3
4
Close all open programs.  
Insert the DVD into the optical disc drive.  
Click Start and point to All Programs.  
Select a DVD software program to play the DVD.  
For instructions on how to use a program, see the help guide included with the DVD software program.  
Copying Files to DVDs  
To copy files to a DVD-R or DVD-RW  
1
2
3
Insert the disc into the optical disc drive.  
Click Start and point to All Programs.  
Select a DVD software program you want to use from the submenu.  
For instructions on how to use a program, see the help guide included with the DVD software program.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
33  
Using Your VAIO Computer  
Using the TV Function  
Your computer has a TV tuner board installed along with the Microsoft Windows XP Media Center Edition operating  
system to enhance your computing experience.  
Media Center provides you with a wide range of TV, DVD, and video viewing, as well as music recording and playback. This  
section describes how to set up your TV, set-top box, and other equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
34  
Using Your VAIO Computer  
Setting Up TV Connections  
!
The following connections may not be available depending on the country of your residency.  
The best method of connecting your computer system, TV monitor or display, and cable service access, depends on the type  
of cable connection available in your home.  
TV signal reception strength will vary widely depending on service availability in your area as well as the type of connection  
available.  
One primary cable to connect the computer to a TV cable or antenna is the TV coaxial cable (not supplied with the computer).  
One end connects to the computer's VHF/UHF port, and the other end connects to the cable service access or antenna.  
A TV coaxial cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
35  
Using Your VAIO Computer  
Connecting to standard cable access (CATV)  
To connect in CATV mode  
1
2
Connect one end of the TV coaxial cable (1) (not supplied) to your cable service access (wall outlet) (2).  
Connect the other end of the coaxial cable to the VHF/UHF port (3) on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
36  
Using Your VAIO Computer  
Connecting to a standard antenna  
You can connect your computer to an indoor/outdoor antenna system.  
If you are connecting to an indoor/outdoor antenna, you may need to reorient the antenna for best reception. Move the antenna cable away from other  
power sources or connectors to reduce reception interference.  
To connect in terrestrial mode  
1
2
Connect one end of a TV coaxial cable (2-3) (not supplied) to your antenna outlet (1).  
Connect the TV coaxial cable to the VHF/UHF port (4) on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
37  
Using Your VAIO Computer  
Connecting with a cable or satellite set-top box (STB)  
You can connect your computer to cable service access that uses a set-top box (cable or satellite). When using the set-top  
box (STB) setup, you can only change channels through the STB, using its controls or supplied remote control.  
When using the STB setup:  
A standard TV remote control cannot be used to change TV channels. You can use your TV remote control to set the TV  
to the channel-out number (channel 3, 4, etc.) or direct video input specified by your cable or satellite service provider.  
You may be able to use a universal remote control to change TV channels, if the device is able to control the STB.  
To connect in STB mode (Option 1)  
1
2
3
4
Connect one end of a TV coaxial cable (1) (not supplied) to your cable service access (wall outlet) (2). Connect the other  
end to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3).  
Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT connector on your STB unit (3). Connect the  
other end to the single-connection end of a splitter device (5) (not supplied).  
Connect a third TV coaxial cable (6) (supplied) to the double-connection end of the splitter device (5). Connect the other  
end to the VHF/UHF port (7) on the computer.  
Connect a fourth TV coaxial cable (8) (not supplied) to the double-connection end of the splitter device (5). Connect the  
other end to the VHF/UHF port (9) on the rear of your TV monitor or display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
38  
Using Your VAIO Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
39  
Using Your VAIO Computer  
To connect in STB mode (Option 2)  
1
2
3
Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other  
end to the VHF/UHF IN connector on the back panel of your set-top box (STB) (3).  
Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT connector on your STB unit (3). Connect the  
other end to the VHF/UHF port (5) on the rear of your TV monitor or display.  
Connect the double mini-plugs of the audio cable (6) (not supplied) to the Composite Audio Out (L/R) connectors (7) on  
the back panel of your STB unit (3), matching the jack colors. Connect the other end of the audio cable (6) to the  
Composite Audio In connector (8) on the computer.  
4
Connect one end of the S Video cable (9) (not supplied) to the Composite Video Out connector (10) on the back panel of  
your Set top box unit (3). Connect the other end of the same S Video cable to the S Video In connector (11) on the  
computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40  
Using Your VAIO Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
41  
Using Your VAIO Computer  
Using the Remote Control  
Your computer is supplied with a remote control for using Media Center features, including TV channel selection.  
A MY MUSIC button  
Press to view and listen to your music playlists.  
B MY TV button  
Press to view the My TV menu.  
C STOP button  
Press to stop media playback or a TV recording session.  
PAUSE button  
Press to pause media playback. Press again to resume  
playback.  
FWD button  
Press to fast-forward media at three speeds.  
SKIP button  
Press to move media forward, for example, one audio track,  
one DVD chapter, and 30 seconds of recorded TV or video.  
REPLAY button  
Press to move media backward, for example, one audio track,  
one DVD chapter, and seven seconds of TV or video.  
REW button  
Press to move media backward at two speeds.  
RECORD button  
Press to begin recording.  
PLAY N button  
Press to begin media playback.  
E
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
42  
Using Your VAIO Computer  
D BACK button  
N Directional arrow buttons  
Press to return to the previous window.  
Press the M, m, <, and , buttons to move the pointer on the  
screen.  
OK button  
Press OK to select the desired action or window option. When  
watching full-screen TV, press OK to return to the previous  
channel. Press OK again to switch between channels.  
E VOL button  
Press to increase (+) or decrease (-) the volume.  
F RECORDED TV button  
Press to view previously recorded TV programs (In My TV  
window).  
O CH/PG (Channel/Page) button  
Press to change or page up/down channels (no number input  
required).  
G GUIDE button  
Press to view the TV program guide for your area.  
H Channel number buttons (0-9)  
Press to select specific channels or enter text. (Press Enter or OK  
to activate the channel selection.)  
P START  
button  
Press to open the Media Center Start menu.  
MUTE button  
I CLEAR button  
Press to turn off the sound. Press again to restore the sound.  
Use to backspace and delete entered text.  
Q DVD MENU button  
J STANDBY button  
Press to open the main menu on a DVD.  
Press to place the computer in Standby mode to reduce power  
consumption.  
R LIVE TV button  
Press to view TV programming.  
K MY PICTURES button  
Press to view pictures or a slide show.  
S ENTER button  
Press to activate feature or action, such as channel selection or  
return to previous channel. (This button's actions are similar to  
using the OK button.)  
L MY VIDEOS button  
Press to view videos from your video collection.  
M MORE  
button  
Press to view additional options that are available for Media  
Center features.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
43  
Using Your VAIO Computer  
Before you use the remote control  
Before using the remote control, you need to insert the supplied AA batteries and connect the remote sensor to enable  
communication between the computer and the remote commander.  
To insert batteries  
1
2
3
Turn the remote commander over.  
Press in the tab (1) and lift the battery cover up.  
Insert the supplied two AA batteries into the remote control.  
4
5
Align the battery cover to the remote control.  
Press down until the cover clicks into place.  
If the remote control does not operate properly, you may need to replace the batteries. When the remote control is not being used for extended periods  
of time, remove the batteries to avoid possible damage from battery leakage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44  
Using Your VAIO Computer  
To connect the remote sensor  
1
2
Choose the USB port (1)  
you prefer to use.  
Plug the remote sensor cable (2) into the USB port.  
3
Position the remote sensor (3) to enable unobstructed communication with the remote control.  
If you are using a cable or satellite set-top box, you can attach the remote sensor control to the remote sensor, which enables you to control the set-  
top box with the remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
45  
Using Your VAIO Computer  
To connect the remote sensor control  
1
Plug the remote sensor control cable (1) into either connector (1 or 2) on the back of the remote sensor (2).  
2
3
Remove the adhesive tape cover from the bottom of the remote sensor control.  
Attach the remote sensor control (3) onto the set-top box (4) near the infrared port (5).  
!
Do not cover the infrared port when attaching the remote sensor control.  
The remote sensor must be visible in a line-of-sight with the remote control in order to function properly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
47  
Using Your VAIO Computer  
Using PC Cards  
PC Cards allow you to connect portable external devices to your computer.  
Inserting a PC Card  
!
Some PC Cards or their functions may not be compatible with the computer.  
You do not need to shut down the computer before inserting or removing a PC Card.  
To insert a PC Card  
1
2
Hold the PC Card with the label facing toward the front of the computer.  
Gently push the PC Card into the PC Card slot.  
The PC Card is automatically detected by your system.  
The Safely Remove Hardware icon appears on the taskbar.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
48  
Using Your VAIO Computer  
Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you  
alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not  
recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer.  
While the card is inserted, the computer may not enter Hibernate power management mode. It may enter Standby mode. We recommend that you  
remove the card before the computer enters Hibernate mode.  
Make sure you use the most recent software driver provided by the PC Card manufacturer.  
If an "!" mark appears on the Device Manager tab in the System Properties window, remove the software driver and then reinstall it.  
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC  
Card in the correct direction. See the manual supplied with your PC Card for more information on use.  
Removing a PC Card  
Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not  
work properly.  
To remove a PC Card  
To remove a PC Card when the computer is off, skip steps 1 to 7.  
1
Double-click the Safely Remove Hardware icon on the taskbar.  
The Safely Remove Hardware window appears.  
2
3
Select the hardware you want to unplug.  
Click Stop.  
The Stop a Hardware Device window appears.  
4
Confirm that the device can be safely removed from the system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
49  
Using Your VAIO Computer  
5
Click OK.  
A window appears, explaining that it is safe to remove the device.  
6
7
8
9
Click OK.  
Click Close.  
Push the PC Card release button so that the release button pops out.  
Push the PC Card release button a second time so that the PC Card pops out.  
10 Gently take hold of the Card and pull it out of the slot.  
11 If the PC Card release button is still out, push it back in.  
Using a Memory Stick  
Your computer supports Memory Stick devices. Memory Stick is a compact, portable, and versatile device especially  
designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other  
devices. Because it is removable, it can be used for external data storage.  
For the latest information on Memory Stick devices, visit the Sony online support Web site at http://www.memorystick.com.  
Write-protecting a Memory Stick  
Some versions of Memory Stick are designed with an erasure prevention switch to protect valuable data from accidental  
erasure or overwriting.  
*
Move the tab horizontally or vertically to set or release write-protection. When the erasure prevention switch is off, data can  
be saved on the Memory Stick. When the erasure prevention switch is on, data can be read from but not saved on the Memory  
Stick.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
50  
Using Your VAIO Computer  
*
Some Memory Stick versions do not have an erasure prevention switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
51  
Using Your VAIO Computer  
Inserting a Memory Stick  
There are two ways you can insert a Memory Stick into your computer:  
Using the Memory Stick slot;  
Using a PC Card slot. To do this, you need an optional PC Card adapter.  
The Memory Stick slot is located behind a protective cover on the front of the computer. You need to open the cover  
before accessing the memory card slots.  
To insert a Memory Stick using the Memory Stick slot  
1
2
3
Flip the front panel down, using your fingertip.  
Locate the Memory Stick slot.  
Hold the Memory Stick with the arrow facing toward the front of the computer and insert it into the Memory Stick slot in  
the direction of the arrow.  
4
Carefully slide the Memory Stick into the slot until it clicks in place.  
The Memory Stick is automatically detected by your system and appears in your My Computer window as a local drive,  
under the appropriate letter (depending on the configuration of the computer).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
52  
Using Your VAIO Computer  
!
Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging the computer or the  
Memory Stick, do not force the Memory Stick into the slot if it does not insert smoothly.  
Do not insert more than one Memory Stick into the Memory Stick slot. Inserting the media improperly may damage the computer.  
The computer supports Memory Stick Duo and is equipped with the Memory Stick combo slot that is compatible with both standard- and duo-size  
media. For more information on Memory Stick Duo, visit the Memory Stick web site at http://www.memorystick.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
53  
Using Your VAIO Computer  
To view the contents of the Memory Stick  
1
Click Start and then My Computer to open the My Computer window.  
2
Double-click the Memory Stick icon to view the list of data files saved on the Memory Stick.  
To format a Memory Stick  
Use the Memory Stick Formatter software. See the help file on the Memory Stick Formatter software for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
54  
Using Your VAIO Computer  
Removing a Memory Stick  
To remove a Memory Stick using the Memory Stick slot  
1
2
Check that the Media Access indicator is off.  
Push the Memory Stick in toward the computer.  
The Memory Stick ejects.  
3
Pull the Memory Stick out of the slot.  
!
Always remove the Memory Stick gently, or it may pop out unexpectedly.  
Do not remove the Memory Stick while the Media Access indicator is turned on. If you do, you may lose data. Large volumes of data may take time to  
load, so be sure the indicator is off before removing the Memory Stick.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
55  
Using Your VAIO Computer  
Using Other Memory Cards  
In addition to the Memory Stick slot, your computer is equipped with three other memory card slots to accommodate many  
popular types of memory cards. You can use these slots to transfer data between digital cameras, camcorders, music players,  
and other audio/video devices.  
The memory card slots are located behind a protective cover on the front of the computer. You need to open the cover before  
accessing the memory card slots.  
Before You Use Memory Cards  
Your computer supports the following memory cards:  
CompactFlash  
Multi Media Card (MMC)  
Microdrive  
SmartMedia  
xD-PictureCards  
Secure Digital (SD)  
The VAIO-Link web site (www.vaio-link.com) contains the latest information on compatible memory cards.  
!
Always insert the correct memory card into the appropriate memory card slot.  
Do not attempt to insert a different memory card or memory card adapter into a different memory card slot. An incompatible memory card or adapter  
may be difficult to remove from the wrong slot and can cause damage your computer.  
Use care when inserting or removing a memory card from the slot. Do not force the memory card in or out of the slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
56  
Using Your VAIO Computer  
Inserting a Memory Card  
To insert a memory card  
1
Flip the front panel down, using your fingertip.  
Do not use force to open the cover.  
2
Locate the appropriate slot for the memory card you want to use.  
3
4
Hold the memory card with the arrow facing up and toward the memory card slot.  
Carefully slide the memory card into the slot until it clicks in place.  
Do not force the card into the slot.  
If the memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
57  
Using Your VAIO Computer  
Removing a Memory Card  
The correct way to remove a memory card from a memory card slot varies, depending on the media or slot. Use care when  
removing a memory card to avoid damage to the slot or card.  
!
Do not remove a memory card while the Media Access indicator light is on. The card or its data may become damaged.  
To remove a memory card  
1
2
3
Check that the Media Access indicator is off.  
Firmly grasp the extended part of the memory card.  
Carefully pull it out of the slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
58  
Using Your VAIO Computer  
Using the Internet  
Setting Up a Dial-up Internet Connection  
Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (not  
supplied). Once you set up your telephone cable, you're ready to connect to the Internet.  
To connect a telephone cable  
1
2
Plug one end of the phone cable (1) into the modem port  
Plug the other end into the wall jack (2).  
on the computer.  
The computer cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX).  
Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.  
If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.  
To set up a dial-up connection to the Internet  
1
Click Start, point to All Programs, Accessories, Communications, and click New Connection Wizard.  
The New Connection Wizard appears.  
2
3
4
Click Next. If the Location Information window appears, follow the on-screen instructions.  
If it is not already selected, click to select Connect to the Internet, and click Next.  
Follow the on-screen instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
59  
Using Your VAIO Computer  
Using Wireless LAN (WLAN)  
Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each  
other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through  
a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.  
You can communicate without an Access Point, which means that you can communicate between a limited number of  
computers (ad-hoc). Or you can communicate through an Access Point, which allows you to create a full infrastructure  
network (infrastructure).  
For details about WLAN, refer to the Regulations Guide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
60  
Using Your VAIO Computer  
Communicating without an Access Point (Ad-hoc)  
An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other  
central controller or Access Point. Each device communicates directly with other devices in the network. You can set up an  
ad-hoc network easily at home.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
61  
Using Your VAIO Computer  
To communicate without an Access Point (ad-hoc)  
1
Turn on the WIRELESS or WIRELESS LAN switch.  
The WIRELESS LAN indicator lights up.  
2
3
4
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
The Network Connections window appears.  
5
Right-click Wireless Network Connection, then click Properties.  
The Wireless Network Connection Properties window appears.  
6
7
Select the Wireless Networks tab.  
Click the Add… button.  
The Wireless network properties window appears.  
*2  
8
9
Enter a Network name (SSID) .  
You can choose a 32-digit alphanumeric name.  
Select Open from the Network Authentication drop-down box.  
10 Select WEP from the Data Encryption drop-down box.  
11 Deselect the The key is provided for me automatically option button.  
Some information becomes visible.  
*2  
12 Enter the Network key .  
*3  
The network key should be 5 or 13 alphanumeric characters or 10 or 26 hexadecimal characters long. You can choose  
whatever you want.  
13 Enter exactly the same Network key again, for confirmation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
62  
Using Your VAIO Computer  
14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the  
bottom of the screen.  
15 Click OK.  
Your Network name appears in the Preferred networks.  
16 Click Advanced.  
The Advanced window appears.  
17 Select the Computer-to-computer (ad hoc) networks only option button.  
18 Click Close.  
19 Click OK.  
The computer is ready to communicate with another computer.  
*1  
If you want to communicate between two or more computers, you need to configure all these computers in the same way. This means that you need to enter the same  
Network name and the same Network key on all computers as on the first computer you configure.  
*2  
Hexadecimal: A number representation using the digits 0-9, with their usual meaning, plus the letters A-F (or a-f) to represent hexadecimal digits with values of (decimal)  
10 to 15.  
An ad-hoc network does not support WPA (Wi-Fi Protected Access).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
63  
Using Your VAIO Computer  
To disconnect from a computer-to-computer (ad-hoc) network  
1
2
3
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
The Network Connections window appears.  
4
5
6
In the right panel under LAN or High-Speed Internet, double-click Wireless Network Connection.  
The Wireless Network Connection Status window appears.  
Click Properties.  
The Wireless Network Connection Properties window appears.  
On the Wireless Networks tab, click Advanced.  
The Advanced window appears.  
7
8
9
Click to select Any available network (access point preferred), and click Close.  
Click OK.  
Click Close.  
10 Turn off the WIRELESS or WIRELESS LAN switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
64  
Using Your VAIO Computer  
Communicating with an Access Point (Infrastructure)  
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access  
Point, for example the Sony Access Point. The Access Point bridges the wireless and wired LAN and acts as a central  
controller for the Wireless LAN. The Access Point coordinates transmission and reception from multiple wireless devices  
within a specific range.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
65  
Using Your VAIO Computer  
To connect to a wireless network  
1
Make sure an access point is set up.  
See the instructions that accompanied the access point for more information.  
2
Turn on the WIRELESS LAN switch.  
The WIRELESS LAN indicator lights up.  
3
4
5
6
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
In the right panel under LAN or High-Speed Internet, double-click Wireless Network Connection.  
The Wireless Network Connection window appears.  
7
Follow the on-screen instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
66  
Using Your VAIO Computer  
To connect to a wireless network (Models with the VAIO Wireless Utility software only)  
Use the VAIO Wireless Utility software to guide you through the set up process and provide you with more detailed  
information about wireless connections.  
1
2
3
4
Make sure an access point is set up.  
See the instructions that accompanied the access point for more information.  
Turn on the WIRELESS or WIRELESS LAN switch.  
The WIRELESS LAN indicator lights up.  
Click Start, point to All Programs, and click VAIO Wireless Utility.  
The VAIO Wireless Utility appears.  
Follow the on-screen instructions.  
To disconnect from a wireless network  
Turn off the WIRELESS or WIRELESS LAN switch.  
!
Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.  
The WPA (Wi-Fi Protected Access) key needs to contain at least 8 characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
67  
Using Peripheral Devices  
Using Peripheral Devices  
You can add functionality to your computer by using the various ports on the computer.  
Connecting an External Microphone (page 68)  
Connecting a Universal Serial Bus (USB) Device (page 69)  
Connecting a Printer (page 71)  
Connecting an i.LINK Device (page 72)  
Connecting to a Network (LAN) (page 74)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
68  
Using Peripheral Devices  
Connecting an External Microphone  
If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone.  
To connect an external microphone  
Plug the microphone cable (1) into the microphone connector (2) m.  
Make sure your microphone is designed for computer use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
69  
Using Peripheral Devices  
Connecting a Universal Serial Bus (USB) Device  
Connecting a USB Floppy Disk Drive  
You can purchase a USB floppy disk drive and connect it to your computer.  
To connect a USB floppy disk drive  
1
2
Choose the USB port  
you prefer to use.  
Plug the USB floppy disk drive cable into the USB port.  
Your USB floppy disk drive is now ready for use.  
!
When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
70  
Using Peripheral Devices  
Disconnecting a USB floppy disk drive  
You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in  
a power saving mode (Standby or Hibernate) may cause the computer to malfunction.  
If the computer is off, you can unplug the USB cable directly from the computer.  
To disconnect a USB floppy disk drive  
1
2
Close all programs accessing the floppy disk drive.  
Double-click the Safely Remove Hardware icon on the taskbar.  
The Safely Remove Hardware window appears.  
3
4
Select the floppy disk drive you want to unplug.  
Click Stop.  
The Stop a Hardware device window appears.  
5
6
Make sure the floppy disk drive is selected, and click OK.  
A message appears stating it is now safe to remove the hardware device.  
Remove the floppy disk drive from the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
71  
Using Peripheral Devices  
Connecting a Printer  
You can connect a Windows-compatible printer to your computer to print documents.  
Connecting a Printer using the USB Port  
You can connect a USB printer compatible with your version of Windows to the computer.  
You need to slide the back panel cover up to access the USB ports on the bottom panel.  
To connect a printer using the USB port  
1
Plug the printer power cord into an AC outlet (1).  
2
3
Choose the USB port (3) you prefer to use.  
Plug one end of a USB printer cable (2) into the USB port and the other end to your printer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
72  
Using Peripheral Devices  
Connecting an i.LINK Device  
Notes on connecting i.LINK devices  
The computer includes an i.LINK (IEEE1394) port, which you can use to connect to an i.LINK device such as a digital  
video camera recorder or to connect two VAIO computers in order to copy, delete or edit files.  
The i.LINK port of the computer does not supply power to external devices generally powered by i.LINK ports.  
The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of  
the external device.  
i.LINK cables compatible with the computer include cables with the following part numbers:  
VMC-IL4415 (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408 Series (a 0.8 meter cable with a 4-pin  
connector at each end).  
An i.LINK connection with other compatible devices is not fully guaranteed.  
The i.LINK connection varies depending on the software applications, operating system and i.LINK compatible devices  
you use. Refer to the manual that came with your software for more information.  
Check the working conditions and OS compatibility of i.LINK-compatible PC peripherals (for example, an HDD or CD-RW  
drive) before you connect them to the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
73  
Using Peripheral Devices  
Connecting a Digital Video Camera Recorder  
To connect a digital video camera recorder  
1
Plug one end of the i.LINK cable (1) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports  
(3) on the digital video camera recorder.  
2
Launch the DVgate Plus software.  
On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible.  
The Sony digital video camera recorder shown here is an example; your digital video camera recorder may need to be connected differently.  
You cannot access the pictures stored on a Memory Stick when using an i.LINK connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
74  
Using Peripheral Devices  
Connecting to a Network (LAN)  
You can connect your computer to 100BASE-TX/10BASE-T-type networks via an Ethernet network cable. Connect one end  
of an optional network cable to the Network (Ethernet) port on the left of the computer and the other end to your network. For  
detailed settings and devices needed to connect to the network, see your network administrator.  
!
Your computer has a protective sticker  
covering the Network (Ethernet) port located on the left of the computer. Connect a 10BASE-T or  
100BASE-TX cable to the Network (Ethernet) port. Using an incorrect cable or a phone cable may result in an electric current overload that can cause  
a malfunction, excessive heat, or fire in the Network (Ethernet) port. For help on connecting to a network, see your network administrator.  
The computer can be connected to the network with the default settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
75  
Using Peripheral Devices  
!
Telephone lines cannot be connected to the Network (LAN) connector on your computer.  
If the Network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage,  
overheating or fire.  
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)  
- Public telephone subscriber line  
- PBX (private branch exchange)  
!
Do not plug a telephone cable into the network port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
76  
Customizing Your VAIO Computer  
Customizing Your VAIO Computer  
This section briefly describes how to change the main settings of your computer.  
Setting the Password (page 77)  
Setting Up Your Computer with VAIO Control Center (page 80)  
Using the Power Saving Modes (page 81)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
77  
Customizing Your VAIO Computer  
Setting the Password  
Use one of the BIOS functions to set the password.  
Once you have set the password, you will have to enter the password after the VAIO logo appears to start your computer.  
The power-on password will allow you to protect your computer from unauthorized access.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
78  
Customizing Your VAIO Computer  
Adding the Power-on Password  
!
Once you have set the power-on password, you cannot start the computer without entering the password. Make sure not to forget the password. Write  
down your password and keep it safe and private from other people.  
If you forget the power-on password and need assistance to reset, a password reset fee will be charged, and your computer may need to be sent in for  
depot service for password reset.  
To add the power-on password  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears.  
3
4
Use the < or , key to select Security on the Boot menu to display another screen, select Change Supervisor  
Password, and then press the Enter key.  
On the password entry screen, enter the password twice and press the Enter key.  
The password can be up to 6 alphanumeric characters long.  
The following is to configure the computer to prompt password entry when you turn it on or display the BIOS setup screen.  
5
Select Password Check under Security.  
Press the Enter key to change the setting from Setup to Always.  
6
7
Press the Esc key.  
Use the < or , key to select Exit and select Exit (Save Changes); and then press the Enter key.  
On the Setup Confirmation screen, make sure that OK is selected and then press the Enter key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
79  
Customizing Your VAIO Computer  
Changing/Removing the Power-on Password  
To change or remove the power-on password  
1
2
3
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
Enter the current password for Enter Current Password:  
The BIOS setup screen appears.  
4
5
Use the < or , key to select Security on the Boot menu to display another screen, select Change Supervisor  
Password, and then press the Enter key.  
On the password entry screen, enter a new password twice, and press the Enter key.  
To remove the password, leave the Enter Password field blank and press the Enter key.  
6
7
Press the Esc key.  
Use the < or , key to select Exit and select Exit (Save Changes); and then press the Enter key.  
On the Setup Confirmation screen, confirm that OK is selected and then press the Enter key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
80  
Customizing Your VAIO Computer  
Setting Up Your Computer with VAIO Control Center  
The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior.  
To use VAIO Control Center  
1
Click Start, point to All Programs, and click VAIO Control Center.  
The VAIO Control Center window appears.  
2
3
Select the desired control item and change the settings.  
Once finished, click OK.  
The setting of the desired item has been changed.  
For more information about each option, click Help on the VAIO Control Center window to display the help file.  
Some of the control items will not be visible if you open VAIO Control Center as a limited user.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
81  
Customizing Your VAIO Computer  
Using the Power Saving Modes  
In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power  
saving modes: Standby and Hibernate.  
The color of the power indicator light behind the power button tells you which mode the computer is in.  
Power indicator  
Green  
Mode  
Computer is in Normal mode (on).  
Computer is in Standby mode.  
Computer is turned off or in Hibernate mode.  
Amber  
No light  
To set the timer for the computer to automatically enter Standby or Hibernate mode after a certain amount of time, click Start  
and Control Panel. Click Performance and Maintenance and Power Options, and then change the settings under Power  
Schemes.  
Using Normal Mode  
This is the normal state of the computer when it is in use. The green power indicator light is on in this mode. To save power  
while not working, you can turn off a specific device such as the LCD or the hard disk.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
82  
Customizing Your VAIO Computer  
Using Standby Mode  
Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber  
power light flashes in this mode.  
To activate Standby mode  
1
2
Click Start and then Turn Off Computer.  
Click Stand By.  
Alternatively, you can press the Standby button on the keyboard to put the computer in Standby mode.  
To return to Normal mode  
Press any key.  
!
If you press the power button for more than four seconds, the computer will switch off automatically. You will lose any unsaved data.  
When the computer is in Standby mode, you cannot insert a disc.  
The computer comes out of Standby mode quicker than out of Hibernate mode.  
Standby mode uses more power than Hibernate mode.  
If the computer is not used for more than 20 minutes, it will enter Standby mode. To avoid this, you can change the Standby  
mode settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
83  
Customizing Your VAIO Computer  
Using Hibernate Mode  
In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. The power indicator light is off  
in this mode.  
To activate Hibernate mode  
1
2
Click Start and then Turn Off Computer.  
Click Hibernate.  
To return to Normal mode  
Turn on the computer by pressing the power button.  
The computer returns to its previous state.  
!
If you press the power button for more than four seconds, the computer will switch off automatically.  
If you do not use the computer for a long period of time, put the computer into Hibernate mode. This power saving mode saves you the time of shutting  
down or resuming.  
When the computer is in Hibernate mode, you cannot insert a disc.  
Hibernate mode requires more time than Standby mode to be activated.  
It takes more time to return to Normal mode from Hibernate mode than from Standby mode.  
Hibernate mode uses less power than Standby mode.  
!
Do not move the computer until its power indicator light turns off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
84  
Upgrading Your VAIO Computer  
Upgrading Your VAIO Computer  
Your computer and memory modules use high precision components and electronic connectors technology. To avoid the  
invalidation of your guarantee due to mishandling, we recommend that:  
You contact your dealer to install a new memory module.  
You do not install it yourself, if you are not familiar with upgrading memory on a computer.  
You do not touch the connectors or open the memory panel.  
For the type of module and amount of memory installed on your model, refer to the online Specifications.  
Contact VAIO-Link if you need assistance.  
Before Upgrading Your Computer (page 85)  
Adding and Removing Memory (page 86)  
Installing the Hard Disk Drive (page 95)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
85  
Upgrading Your VAIO Computer  
Before Upgrading Your Computer  
The upgrading procedures described in this section assume that you are familiar with the general terminology associated with  
personal computers, safety practices, required regulatory compliances, and the modification of electronic equipment.  
Disconnect the computer from its power source and from telecommunications links, networks, or modems before you open  
the computer or follow any procedures in this section.  
!
Failure to disconnect the computer from its power source may result in personal injury or equipment damage. Always turn the power off before you  
open the computer or connect peripheral equipment. Otherwise, damage may occur to the integrated circuits.  
Electrostatic discharge (ESD) can damage disk drives and other components. Follow the procedures described here only at an ESD workstation. If such  
a station is not available, do not work in a carpeted area and do not handle materials that produce or hold static electricity (for example, cellophane  
wrappers). Ground yourself by maintaining continuous contact with an unpainted metal portion of the chassis while performing the procedure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
86  
Upgrading Your VAIO Computer  
Adding and Removing Memory  
If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules.  
Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available  
slots depends on the configuration of your model.  
Notes on adding/removing memory modules  
Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This  
damage may void your manufacturer's warranty.  
Only use memory modules that are compatible with the computer. If a memory module is not detected by the computer  
or Windows becomes unstable, contact your sales dealer or the manufacturer of your memory module.  
Electrostatic discharge can damage electronic components. Before touching a memory module, ensure the following:  
The procedures described in this document assume familiarity with the general terminology associated with personal  
computers and with the safety practices and regulatory compliance required for using and modifying electronic  
equipment.  
Turn off the computer and disconnect the system from its power source and from any telecommunication links,  
networks, or modems before you open the computer. Failure to do so may result in personal injury or equipment  
damage.  
Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory module only  
at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials  
that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with  
an unpainted metal portion of the chassis while performing the procedure.  
Do not open the memory module package until you are ready to change the module. The package protects the  
module from ESD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
87  
Upgrading Your VAIO Computer  
Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from electrostatic  
discharge.  
Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the  
computer, will result in damage to the computer and any repair costs will not be covered by the warranty.  
Do not place the memory module in places subject to:  
Heat sources such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 95°F (35°C) or less than 41°F (5°C)  
High humidity  
Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the  
components and circuit boards inside the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
88  
Upgrading Your VAIO Computer  
Removing and Installing a Memory Module  
!
If you remove the top panel immediately after you shut down the computer, the internal components may be too hot to touch. Wait about one hour to  
let the components cool down before you attempt to remove the panel.  
To change or add a memory module  
1
2
Shut down the computer and turn off all peripheral devices, such as a printer.  
Unplug the computer and disconnect any peripheral devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
89  
Upgrading Your VAIO Computer  
3
Press and hold the release button (1), slide the top panel (2) toward the back of the computer, lift the panel, and set it  
aside.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
90  
Upgrading Your VAIO Computer  
4
Unscrew the two screws on the memory cover (1), lift the cover, and set it aside.  
5
Touch a metal object (such as the chassis frame) to discharge static electricity.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
91  
Upgrading Your VAIO Computer  
6
7
Locate the memory module(s) you wish to remove.  
Push down on the latches (1), located on both sides of the module, to gently eject it from the slot.  
8
Grasp the memory module by the sides and remove from the computer. Store the module in a static-free bag.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
92  
Upgrading Your VAIO Computer  
9
Locate the center notch (1) on the bottom edge of the memory module and align it to the center bump in the open module  
slot.  
10 Firmly insert the lower edge of the module (2) into the slot by pressing down evenly against the module's upper corners.  
The side latches (3) snap into position, holding the memory module in place.  
!
To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to relieve pressure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
93  
Upgrading Your VAIO Computer  
11 Replace the memory cover (1) and tighten the two screws.  
12 Gently slide the top panel onto the computer until it snaps into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
94  
Upgrading Your VAIO Computer  
Viewing the Amount of Memory  
To view the amount of memory  
1
2
3
4
5
Turn on the computer.  
Click Start, point to All Programs, and click VAIO Control Center.  
Click the System Information tab in the VAIO Control Center window.  
Double-click the System Information folder.  
Double-click the System Information icon.  
You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and  
restart the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
95  
Upgrading Your VAIO Computer  
Installing the Hard Disk Drive  
Your computer may be equipped with open internal bays to hold additional 3.5-inch hard disk drives. See the online  
Specifications for details about the installed hard disk drive.  
Review the manufacturer's information provided with your new hard disk drive before attempting to install it in the computer.  
Replacing the Original Hard Disk Drive  
If you replace the original, factory-installed hard disk drive, you may need to correct the drive mapping, and/or create a VAIO  
Recovery Media Kit. Visit the VAIO-Link web site (www.vaio-link.com) for more information.  
About drive mapping  
*
When a new hard disk drive is installed, the original drive mapping may be changed. The identified drives, including those  
for removable media, may not reflect correct drive/icon associations. For more information on how to correct the drive  
mapping, visit the VAIO-Link web site (www.vaio-link.com).  
*
Drive mapping refers to the assignment of an identifying letter to a specific drive, such as Drive C or Drive D which identify the original hard disk drive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
96  
Upgrading Your VAIO Computer  
About hard disk drive recovery  
When you replace the original hard disk drive, the preinstalled VAIO Recovery utility cannot restore the drive partitions,  
operating system, or original software programs. Before replacing the hard disk drive, create a VAIO Recovery Media Kit.  
Your computer is not supplied with System or Application Recovery CDs. Use the VAIO Recovery utility to recover the computer's operating system  
and preinstalled software programs. For more details, refer to the Recovery Guide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
97  
Upgrading Your VAIO Computer  
Drive letter assignment  
When a new hard disk drive is installed, an identifying drive letter is assigned. The drive letter assignment becomes effective  
after you register for the first time or after recovering your computer with the VAIO Recovery utility.  
The Click to DVD software creates a new folder location on the new hard disk drive. This new folder is the default location  
to save files created with the Click to DVD software.  
If the Microsoft Windows operating system identifies the new hard disk drive as drive D, the Click to DVD software saves  
its files to a new folder on the new drive D.  
If the Windows operating system assigns another letter to the new hard disk drive, such as drive E or J, the Click to DVD  
software creates the new save folder on the new drive.  
When you start the Click to DVD software for the first time, after recovering the computer or installing a new hard disk drive, the software automatically  
creates a new save folder on the new drive.  
Notes on installing a new hard disk drive  
If the computer is equipped with a Serial ATA (SATA) hard disk drive, you do not need to configure the new drive.  
Follow the configuration instructions supplied with the new hard disk drive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
98  
Upgrading Your VAIO Computer  
Installing an Additional Hard Disk Drive  
You can install up to two SATA hard disk drives to the internal hard disk drive bay.  
!
If you remove the back panel immediately after you shut down the computer, the internal components may be too hot to touch. Wait about one hour to  
let the components cool down before you attempt to remove the panel.  
To install an additional hard disk drive  
1
2
3
Shut down the computer and turn off all peripheral devices, such as a printer.  
Unplug the computer and disconnect any peripheral devices.  
Gently place the computer on a flat and stable surface, with the LCD screen facing down.  
!
Use caution when placing the LCD screen face-down on a table or other flat surface. The work surface must be free of dirt or debris that may damage  
the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
99  
Upgrading Your VAIO Computer  
4
Unscrew the four screws on the bottom of the back panel (1).  
5
Slide the back panel toward the bottom of the computer, lift the panel, and set it aside.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
100  
Upgrading Your VAIO Computer  
6
Unscrew the two screws on the hard disk cover (1), lift the cover, and set it aside.  
7
Unscrew the four screws on the drive holder (1).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
101  
Upgrading Your VAIO Computer  
8
Pull the drive holder slightly out and detach the power and interface cables from the original hard disk drive that is  
preinstalled in the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
102  
Upgrading Your VAIO Computer  
9
Slide the drive holder completely out.  
10 Slide a new drive into the drive holder and align the holes on each side of the drive bay.  
11 Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.  
The new hard disk drive is supplied with the necessary screws. Do not overtighten these screws when securing the drive to the drive holder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
103  
Upgrading Your VAIO Computer  
12 Align the drive holder with the tracks on the inside of the chassis.  
Connect the power and internal SATA cables to the original and new hard disks and slide the drive holder in completely.  
13 Replace the hard disk cover and the back panel, and then place the computer upright.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
104  
Upgrading Your VAIO Computer  
Identifying the Additional Hard Disk Space  
When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS)  
format.  
To identify the additional hard disk space  
1
2
3
Log on to Windows as a user with administrator rights.  
Click Start and right-click My Computer.  
Select Manage from the menu.  
The Computer Management window appears.  
4
5
Under the file directory on the right, double-click Storage and then Disk Management.  
Right-click on the newly installed, unformatted hard disk (Disk label identified with red marking) and select Initialize Disk  
from the menu.  
6
7
Click on the allocated area of the disk.  
Right-click the area and select New Partition from the menu.  
The New Partition wizard window appears.  
8
Follow the on-screen instructions to complete the process.  
The Windows XP operating system recognizes the new hard disk drive and applies the NTFS format.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
105  
Precautions  
Precautions  
This section describes safety guidelines and precautions to help you protect your computer from potential damage.  
On Handling the LCD Screen (page 106)  
On Using the Power Source (page 107)  
On Handling Your Computer (page 108)  
On Handling Discs (page 110)  
On Using Headphones (page 110)  
On Handling Memory Stick (page 111)  
On Handling the Hard Disk (page 112)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
106  
Precautions  
On Handling the LCD Screen  
Do not leave the LCD facing the sun. This could damage the LCD. Be careful when using the computer near a window.  
Do not scratch the LCD or exert pressure on it. This could cause a malfunction.  
Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction.  
When the computer returns to normal temperature, the screen returns to normal.  
A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The residual image  
disappears in a while. You can use a screen saver to prevent residual images.  
The screen becomes warm during operation. This is normal and does not indicate a malfunction.  
The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points  
(red, blue, or green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does  
not indicate a malfunction.  
Avoid rubbing the LCD screen. This could damage the screen. Use a soft, dry cloth to wipe the LCD screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
107  
Precautions  
On Using the Power Source  
See the online Specifications to check the power operation of your model.  
Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder.  
You can purchase a power strip with a surge protector. This device prevents damage to the computer caused by sudden  
power surges, in an electrical storm, for example.  
Do not place heavy objects on the power cord.  
To disconnect the cord, pull it out by the plug. Never pull the cord itself.  
Unplug the computer from the AC outlet if you are planning to not use the computer for a long time.  
Make sure that the AC outlet is easily accessible.  
Use the power cord supplied with the computer or genuine Sony products. Do not use any other power cord as it may  
cause a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
108  
Precautions  
On Handling Your Computer  
Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type  
of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of the computer.  
If you drop a solid object or any liquid onto the computer, shut down the computer and then unplug it. You may want to  
have the computer checked by qualified personnel before operating it again.  
Do not drop the computer or place heavy objects on top of the computer.  
Do not place the computer in a location subject to:  
Heat sources, such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Moisture or rain  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 95°F (35°C) or less than 41°F (5°C)  
High humidity  
Do not place electronic equipment near the computer. The electromagnetic field of the computer may cause a  
malfunction.  
Provide adequate air circulation to prevent internal heat from building up. Do not place the computer on porous surfaces  
such as rugs or blankets, or near material such as curtains or draperies that may block its ventilation slots.  
The computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs,  
relocate the computer a suitable distance away from the set.  
Use only specified peripheral equipment and interface cables; otherwise, problems may occur.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
109  
Precautions  
Do not use cut or damaged connection cables.  
If the computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In  
this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact  
an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online support Web site.  
Make sure you disconnect the power cord before cleaning the computer.  
To avoid losing data if the computer is damaged, back up your data regularly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
110  
Precautions  
On Handling Discs  
Do not touch the surface of the disc.  
Do not drop or bend the disc.  
Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole,  
as shown below:  
Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol,  
commercially available cleaners, or anti-static spray) which may cause damage to the disc.  
For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center out.  
If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from  
the center out. Wipe off any remaining moisture with a dry soft cloth.  
Never put stickers on discs. This will affect the use of the disc irreparably.  
On Using Headphones  
Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud  
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
111  
Precautions  
On Handling a Memory Stick  
Do not use the Memory Stick in locations that are subject to static electricity or electrical noise.  
Do not touch the Memory Stick connector with your finger or metallic objects.  
Use only the label supplied with the Memory Stick as a label.  
Do not bend, drop, or apply strong shock to the Memory Stick.  
Do not disassemble or modify Memory Sticks.  
Do not let Memory Sticks get wet.  
Do not use or store Memory Sticks in a location subject to:  
Extremely high temperatures, such as in a car parked in the sun  
Direct sunlight  
High humidity or  
Corrosive substances  
Use the storage case supplied with the Memory Stick.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
112  
Precautions  
On Handling the Hard Disk  
The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by  
mechanical vibration, shock or dust.  
Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you  
should be careful when handling the computer.  
To avoid damaging your hard disk  
Do not subject the computer to sudden movements.  
Keep the computer away from magnets.  
Do not place the computer in a location subject to mechanical vibration or in an unstable position.  
Do not move the computer while the power is on.  
Do not turn off the power or restart the computer while reading or writing data to disk.  
Do not use the computer in a place subject to extreme changes in temperature.  
If the hard disk is damaged, the data cannot be restored.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
113  
Troubleshooting  
Troubleshooting  
This section describes how to solve common problems you might encounter when using your computer. Many problems have  
simple solutions. Try these suggestions before visiting the Sony online support Web site at http://www.vaio-link.com.  
Computer (page 114)  
System Security (page 121)  
Internet (page 123)  
Networking (page 125)  
CDs and DVDs (page 128)  
Display (page 132)  
Printing (page 133)  
Microphone (page 134)  
Mouse (page 135)  
Speakers (page 136)  
Keyboard (page 137)  
Floppy Disks (page 138)  
PC Cards (page 139)  
Audio/Video (page 140)  
Memory Stick (page 141)  
Peripherals (page 142)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
114  
Troubleshooting  
Computer  
What should I do if my computer won't start?  
Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows  
the power is on.  
Make sure the optical disc drive (if applicable) is empty.  
If the computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is  
plugged into a power source and turned on.  
Make sure the brightness and contrast controls are adjusted correctly.  
Condensation may cause the computer to malfunction. If this occurs, do not use the computer for at least one hour.  
Remove any extra memory modules you may have inserted since purchase.  
Confirm that the computer is not in Standby mode by pressing any key on the keyboard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
115  
Troubleshooting  
What should I do if a BIOS error appears when my computer starts?  
If the message "Press F2 to setup" appears at the bottom of the screen  
1
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears.  
2
3
4
Press the , key to select the Exit menu.  
Press the m key to select Load Setup Defaults.  
Press the Enter key.  
The Load Setup Defaults window appears.  
5
6
Select OK, and press the Enter key.  
Select Exit (Save Changes), and press the Enter key.  
The Save configuration changes and exit now? window appears.  
7
Select OK, and press the Enter key.  
The computer restarts.  
If this occurs on a regular basis, contact an authorized Sony Service Center. To find the nearest center or agent, visit the  
Sony online support Web site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
116  
Troubleshooting  
What should I do if the power indicator (Green) lights but my screen does not display  
anything when I turn on my computer?  
If nothing still appears on your screen after a while  
1
Press the power button for more than four seconds to check that the power indicator goes out. Then turn on the computer  
again.  
2
If nothing still appears on your screen, unplug the power cord and leave the computer for about a minute. Then plug in  
the power cord and turn on the computer again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
117  
Troubleshooting  
What should I do if the message "Operating system not found" appears when my  
computer starts, and why won't Windows start?  
Make sure the computer does not have a "non-bootable" CD or DVD in the optical disc drive (if applicable).  
If a non-bootable media is in the drive:  
1
2
Remove the media.  
Restart the computer and confirm that the Microsoft Windows operating system starts properly.  
If the Windows operating system still does not start, follow these steps to initialize the BIOS:  
1
2
3
4
5
If there is a CD or DVD in the optical disc drive, remove it.  
Turn off the computer.  
Remove any peripheral devices connected to the computer.  
Restart the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears.  
6
7
8
Press the , key to select the Exit menu.  
Press the m key to select Load Setup Defaults.  
Press the Enter key.  
The Load Setup Defaults window appears.  
9
Select OK, and press the Enter key.  
10 Select Exit (Save Changes), and press the Enter key.  
The Save configuration changes and exit now? window appears.  
11 Select OK, and press the Enter key.  
The computer restarts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
118  
Troubleshooting  
What should I do if my computer or software stops responding?  
It is best to turn off the computer using the Turn Off Computer option on the Microsoft Windows Start menu, located on  
the taskbar. Using other methods, including those listed below, may result in loss of unsaved data.  
Click Start, point to Turn Off Computer, and then click Turn Off.  
If the computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously. When the Windows Task Manager  
window appears, click Turn Off from the Shut Down menu.  
When the Windows Security window appears, click Shut Down.  
If the computer still does not turn off, press and hold the power button until the computer turns off.  
If the computer stops responding while playing a CD or DVD, press the Ctrl+Alt+Delete keys simultaneously. You can  
turn off the computer from the Windows Task Manager.  
Pressing the Ctrl+Alt+Delete keys simultaneously or turning off the computer with the power button or switch may cause  
loss of data.  
Remove the power cord.  
Try reinstalling the software.  
Contact the software publisher or designated provider for technical support.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
119  
Troubleshooting  
Why won't my computer enter Standby or Hibernate mode?  
The computer may become unstable if the operating mode is changed before the computer completely enters Standby or  
Hibernate.  
To restore the computer to normal operating stability  
1
2
Close all open programs.  
Restart the computer. Follow these steps:  
1
2
3
Press the Windows key.  
Press the U key.  
Press the R key to select restart.  
3
If the computer does not restart, follow these steps:  
1
Press the Ctrl+Alt+Delete keys simultaneously.  
The Windows Task Manager or Windows Security window appears.  
2
When the Windows Task Manager window appears, press and release the Alt key to highlight the menu bar, press  
the , key to select Shut Down, and then follow step 3 and 4.  
When the Windows Security window appears, press the S key to shut down.  
3
4
Press the Enter key.  
Press the R key to select restart.  
4
If this procedure does not work, press and hold the power button until the computer turns off.  
Why don't my changes appear on the computer screen (LCD)?  
You may need to refresh the computer screen. Press and hold the Windows key, and press D twice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
120  
Troubleshooting  
What should I do if I start my computer and the message "System Disabled" appears and  
Windows does not start?  
If you enter a wrong power-on password three times consecutively, the System Disabled message appears and Windows  
does not start. Press the power button for more than four seconds to check that the power indicator goes off. Wait for 10 or  
15 seconds, then restart the computer and enter the correct password. When entering the password, check that the Num lock  
indicator and Caps lock indicator are off. If any are lit, press the Num Lk key or the Caps Lock key to turn off the indicator  
before entering the password.  
What should I do if my game software does not work or it keeps crashing?  
Check the web site of the game if there are any patches or updates to download.  
Make sure you have installed the latest video driver.  
On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is  
not guaranteed.  
What should I do if I cannot remember the password?  
If you have forgotten the password, contact an authorized Sony Service Center to cancel it. A cancellation fee will be charged.  
To find the nearest center or agent, visit the Sony online support Web site.  
Why does it take time before my computer starts?  
If Norton Internet Security's Personal Firewall is active, it may take some time before the Desktop screen appears due to  
network security checkups.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
121  
Troubleshooting  
System Security  
This section provides information about keeping your computer operating smoothly and protecting against potential threats  
to the computer's security.  
How can I protect my computer against security threats, such as viruses?  
The Microsoft Windows operating system is preinstalled on the computer. The best way to protect the computer against  
security threats, such as viruses, is to download and install the latest Windows updates regularly.  
You can get important Windows updates by doing one of the following:  
The Automatic Updates feature — This feature automatically searches for and delivers updates directly to the computer  
whenever you are connected to the Internet.  
The Windows Updates web site — This site enables you to download computer updates without turning on the Automatic  
Updates feature.  
The computer must be connected to the Internet before you can receive updates.  
To use the Automatic Updates feature  
1
2
3
Connect to the Internet.  
Click the Automatic Updates icon on the taskbar.  
Click Next, and follow the on-screen instructions to set up automatic or scheduled updates.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
122  
Troubleshooting  
To visit the Windows Updates web site  
1
2
Connect to the Internet.  
Type http://windowsupdate.microsoft.com/ in the address bar of your browser.  
The Microsoft Windows Update and Security Warning windows appear.  
3
4
In the Security Warning window, start installation and run Windows Update.  
In the Microsoft Windows Update window, select an installation type, and follow the on-screen instructions.  
How do I keep my antivirus software updated?  
You can keep the Norton Internet Security software program current with the latest updates from Symantec Corporation.  
To download and install the latest security update  
1
Double-click the Norton Internet Security icon on the taskbar. If you have not previously registered the antivirus  
software, a series of information wizards appear.  
1
2
Follow the on-screen instructions to complete each wizard.  
Double-click the Norton Internet Security icon again.  
The Norton Internet Security window appears.  
If you have previously registered this antivirus software, the Norton Internet Security window automatically appears.  
2
Follow the on-screen instructions to select and download updates.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
123  
Troubleshooting  
Internet  
Why doesn't my modem work?  
Make sure the telephone cable is securely plugged into the Modem port on the computer and the wall jack.  
Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.  
Make sure the telephone number the program is dialing is correct.  
Make sure the software you are using is compatible with the computer's modem. (All preinstalled Sony programs are  
compatible.)  
Make sure that the modem is the only device connected to your phone line.  
Check the following setting:  
1
2
3
4
5
Click Start and then Control Panel.  
Click Printers and Other Hardware.  
Click Phone and Modem Options.  
On the Modems tab, check that your modem is listed.  
On the Dialing Rules tab, check the location information is correct  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
124  
Troubleshooting  
Why is my modem connection slow?  
The computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed,  
including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think  
your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider (ISP),  
follow these steps:  
Ask your telephone company to verify your telephone line is free of any line noise.  
If your problem is fax-related, make sure there are no problems with the fax machine you are calling and that it is  
compatible with fax modems.  
If you are having a problem connecting with your ISP, make sure the ISP is not experiencing technical problems.  
If you have a second telephone line, try connecting the modem to that line.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
125  
Troubleshooting  
Networking  
Why can't my computer connect to a wireless LAN access point?  
Connection availability is affected by distance and obstructions. You may need to move the computer away from  
obstructions or closer to any access point you may be using.  
Make sure the WIRELESS or WIRELESS LAN switch is on and the WIRELESS LAN indicator is lit on the computer.  
Make sure power to the access point is on.  
Check the following setting:  
1
2
3
4
5
6
7
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
Right-click Wireless Network Connection.  
Click Properties.  
Click the Wireless Network tab.  
Make sure the access point is displayed in the Available networks.  
Make sure the encryption key is correct.  
Why can't I access the Internet?  
Check the access point settings. See the instructions supplied with the access point.  
Make sure the computer and the access point are connected to one another.  
Move the computer away from obstructions or closer to any access point you may be using.  
Make sure the computer is properly configured for Internet access.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
126  
Troubleshooting  
Why is the data transfer speed slow?  
The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other  
factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed,  
move the computer away from obstructions or closer to any access point you may be using.  
If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other  
devices are communicating via the access point.  
If your access point interferes with other access points, change the access point channel. See your access point  
instructions for more information.  
How do I avoid data transfer interruptions?  
When the computer is connected to an access point, data transfer interruptions may occur when using large files or if the  
computer is in close proximity to microwaves and cordless telephones.  
Move the computer closer to the access point.  
Make sure the access point connection is intact.  
Change the access point channel. See your access point manual for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
127  
Troubleshooting  
What are channels?  
Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access  
point channels may be preset to different channels from Sony devices.  
If you are using a wireless LAN access point, see connectivity information contained in your access point instructions.  
When I change the encryption key, the network connection stops. What should I do?  
Two computers with built-in wireless LAN may loose a peer-to-peer network connection if the encryption key is changed. You  
can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
128  
Troubleshooting  
CDs and DVDs  
Why does my computer freeze when I try to read a disc?  
The disc the computer is trying to read may be dirty or damaged. Follow these steps:  
1
2
3
Restart the computer by clicking Start, Turn Off Computer, and Restart.  
Eject the disc from the optical disc drive.  
Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs (page 110) for instructions on how to  
clean it.  
What should I do if the drive tray won't open?  
Make sure the computer is on.  
Press the drive eject button.  
If the drive eject button does not work, click Start and then My Computer. Right click the optical disc drive icon, and select  
Eject from the shortcut menu.  
If none of the above options work, insert a thin, straight object (such as a paper clip) in the manual eject hole near the  
drive eject button.  
Try restarting the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
129  
Troubleshooting  
What should I do if the optical disc drive isn't playing my CD or DVD properly?  
Make sure the disc was inserted into the optical disc drive with the label facing up.  
Make sure the necessary program(s) is installed according to the manufacturer's instructions.  
If the CD or DVD is dirty or damaged, the computer will stop responding. Follow these steps:  
1
Restart the computer by pressing the Ctrl+Alt+Delete keys, and selecting Restart from the Shut Down menu of the  
Windows Task Manager window.  
2
3
Remove the CD or DVD from the optical disc drive.  
Check the disc for dirt or damage. If you need to clean the disc, see On Handling Discs (page 110) for instructions.  
If you are playing a CD or DVD and cannot hear sound, follow these steps:  
Double-click the Volume icon on the taskbar, and click to cancel the Master Volume Mute All and Wave Mute check  
boxes.  
Check the volume setting in the audio mixer.  
If you are using external speakers, check the volume settings on the speakers and the connections between the  
speakers and the computer.  
Make sure the CD audio feature is enabled and the correct driver software is installed. Follow these steps:  
1
2
3
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click System.  
The System Properties window appears.  
4
Select the Hardware tab, and click Device Manager in the Device Manager box.  
A window with a listing of the computer's hardware devices appears.  
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the  
drivers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
130  
Troubleshooting  
5
6
7
Double-click the optical disc drive device to open the submenu.  
Double-click the listed drive, and select the Properties tab.  
Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected.  
You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.  
8
Click OK to close the window.  
Make sure an adhesive label was not attached to the CD or DVD. Adhesive labels can come off while the disc is in the  
optical disc drive and damage the drive or cause it to malfunction.  
If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the DVD package to  
make sure the region code is compatible with the optical disc drive.  
If you notice condensation on the computer, do not use the computer for at least one hour. Condensation can cause the  
computer to malfunction.  
Make sure the computer is running on AC power supply and try the disc again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
131  
Troubleshooting  
What should I do if I cannot write to CD?  
Do not launch any software application or allow any to launch automatically, not even a screen saver.  
Do not use the keyboard.  
Do not use a CD-R/RW disc that has a label affixed to it. This could cause a write error or other damage.  
What should I do if I cannot write to DVD?  
This Q & A entry applies to selected models only. See the online Specifications to see whether your model is equipped with  
an optical disc drive capable of DVD writing.  
Are you using the correct DVD recordable media?  
Check which DVD recordable format is compatible with the computer's built-in DVD recorder (DVD-R / DVD-RW / DVD+R  
/ DVD+RW). Note the possibility that some brands of DVD recordable media do not work.  
The preinstalled software on the computer does not support copying DVD movies. Macrovision or a similar video  
protection technology prevents users from copying DVD movies. Copying a DVD movie would be a copyright infringement  
and therefore illegal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
132  
Troubleshooting  
Display  
Why did the computer screen (LCD) go blank?  
The computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or  
Hibernate). If the computer is in Standby mode, press any key to activate the computer screen. See Using the Power  
Saving Modes (page 81) for more information.  
Make sure the computer is plugged into a power source and is on. The power indicator on the computer will be on if the  
computer is on.  
The display output of the computer may have been turned off, press the MONITOR OFF button.  
What should I do if the screen is dark?  
Press the Brightness (+) button to brighten the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
133  
Troubleshooting  
Printing  
Why can't I print a document?  
Make sure the printer is on, and the printer cable is securely connected to the ports on the printer and computer.  
Make sure the printer is compatible with the Windows operating system installed on the computer.  
You may need to install the printer driver software before you use the printer. See the manual that accompanied the  
printer for more information.  
If the printer is not functioning after the computer resumes from a power saving mode (Standby or Hibernate), then restart  
the computer.  
If the bidirectional communication functions are provided with your printer, disabling the functions on the computer may  
enable printing. Follow these steps:  
1
2
3
4
5
6
7
Click Start and then Control Panel.  
Click Printers and Other Hardware.  
Click Printers and Faxes.  
Right-click an unused printer and select Properties.  
Click the Ports tab.  
Deselect the Enable bidirectional support check box.  
Click OK.  
This change to the settings disables the bidirectional communication functions of the printer, such as data transfer, status  
monitoring, and remote panel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
134  
Troubleshooting  
Microphone  
Why doesn't my microphone work?  
If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone  
jack on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
135  
Troubleshooting  
Mouse  
What should I do if the computer doesn't recognize the mouse?  
Confirm that the supplied AA batteries are properly installed.  
Press the CONNECT button on the mouse and the computer to re-establish the connection between the two devices.  
What should I do if the pointer doesn't move when I use the mouse?  
Make sure another mouse is not installed.  
If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart the computer.  
If you still cannot use the pointer, restart the computer. You can restart the computer three different ways:  
Press the Windows key, and press the U key. When the Turn off computer window appears, press the R key.  
Press the Ctrl+Alt+Delete keys simultaneously. When the Windows Task Manager window appears, press the Alt  
key to highlight the menu bar, and press the , key to select Shut Down. Press the Enter key, and then press the  
R key.  
Press and hold the power button. When the computer turns off, wait 10 to 15 seconds then press the power button  
again to restart the computer.  
If you are using a wireless optical mouse:  
Confirm that the supplied AA batteries are properly installed.  
Press the CONNECT button on the mouse and the computer to re-establish the connection between the two devices.  
Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless  
mouse. These devices may cause interference, causing your mouse to stop working properly.  
Do not place metal furniture near the computer or wireless mouse, as this may create interference, causing your mouse  
to stop working properly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
136  
Troubleshooting  
Speakers  
Why won't my speakers work?  
The speaker volume may have been turned off. Press the MONITOR OFF button on the front of the computer or press  
the Mute button on the keyboard.  
The keyboard also has a volume control, make sure the volume is turned up loud enough to hear sound.  
Why can't I hear sound from my speakers?  
If you are using a program that has its own volume control, make sure the volume control is properly set. See that  
program's help guide for more information.  
Your speakers may be set to mute, the volume setting may be too low, or the audio option may be disabled.  
The speaker volume may have been turned off. Press the MONITOR OFF button on the front of the computer or press  
the Mute button on the keyboard.  
The keyboard also has a volume control, make sure the volume is turned up loud enough to hear sound.  
Check the volume controls in Windows.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
137  
Troubleshooting  
Keyboard  
What should I do if the keyboard configuration is wrong?  
The language layout of the computer's keyboard is specified on the sticker on the box. If you choose a different regional  
keyboard when you complete the Windows setup, the key configuration will be mismatched.  
To change the keyboard configuration, follow these steps:  
1
2
3
Click Start and then Control Panel  
Click Date, Time, Language and Regional Options, and click Regional and Language Options.  
Change the settings as desired.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
138  
Troubleshooting  
Floppy Disks  
Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is  
connected?  
The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port.  
If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not  
appear, follow these steps:  
1
2
3
4
5
Close all programs that were accessing the floppy disk drive.  
Wait for the LED indicator on the floppy disk drive to turn off.  
Push the eject button to remove the disk, and disconnect the USB floppy disk drive from the computer.  
Reconnect the floppy disk drive by inserting the USB connector (with the USB icon facing upward) into the USB port.  
Restart the computer by clicking Start, Turn Off Computer, and then Restart.  
Why is the drive unable to write data to a floppy disk?  
Make sure the floppy disk is properly inserted in the drive.  
If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can  
either use a floppy disk that is not write-protected or disable the write-protect feature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
139  
Troubleshooting  
PC Cards  
Why doesn't my PC Card work?  
Make sure the PC Card is inserted properly. See Inserting a PC Card (page 47) for more information.  
Make sure the PC Card is compatible with the Microsoft Windows operating system installed on the computer.  
See the instructions that accompanied your PC Card. You may need to install driver software if you are not using a Sony  
PC Card.  
Why doesn't my computer recognize attached devices?  
For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate modes while the card is  
inserted into the PC Card slot, the computer may not recognize the PC Card or the connected device. Restart the computer.  
Why can't I insert my PC Card?  
Make sure you are inserting the card correctly. See Inserting a PC Card (page 47) for more information.  
You may not be able to use some PC Cards or some functions of the PC Card with the computer. Check the manual that  
accompanied your PC Card for more information on its use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
140  
Troubleshooting  
Audio/Video  
Why can't I use the DV camera recorder?  
You may not be able to use the DV camera recorder, and the message DV equipment seems to be disconnected or turned  
off may appear because the i.LINK cable is not securely plugged into the ports on the computer or camera. Unplug the  
connectors, and plug them in again. See Connecting an i.LINK Device (page 72) for more information.  
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394 connection. The i.LINK connection  
may vary, depending on the software applications, operating system, and compatible i.LINK devices. All products with an  
i.LINK connection may not communicate with each other. See the manual that came with your compatible i.LINK device for  
information on operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your  
system, such as CD-RW or hard disk drive, confirm their operating system compatibility and required operating conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
141  
Troubleshooting  
Memory Stick  
Why can't I open my image files?  
You may need to reformat your Memory Stick.  
Formatting a Memory Stick erases all data, including music data, previously saved to it. Before you reformat the Memory  
Stick, back up important data and confirm that the media does not contain files you want to keep.  
1
2
Copy the data from the Memory Stick onto the computer's hard disk to save data or images.  
Format the Memory Stick using the Memory Stick Formatter software preinstalled on the computer. For instructions  
about formatting a Memory Stick, see the help file on the Memory Stick Formatter software.  
Why can't I save music files onto my Memory Stick?  
Copyright protected music cannot be checked out to any Memory Stick other than MagicGate Memory Stick.  
Using recorded music requires permission of the copyright holders.  
Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources.  
Can I copy images from a digital video camera using a Memory Stick?  
Yes, and you can view video clips that you have recorded with Memory Stick-compatible video camera recorders.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
142  
Troubleshooting  
Peripherals  
What should I do if I cannot connect a USB device?  
If applicable, check the USB device is switched on and using its own power supply. For example, if you are using a digital  
camera, check the battery is charged. If you are using a printer, check the power cable is connected properly to the AC  
outlet.  
Try using a different USB port on the computer. The driver could be installed to the specific port you used the first time  
you connected the device.  
Check the manual provided with the USB device. You may need to install software before you connect the device.  
Try connecting a simple, low-powered device such as a mouse to test that the port is working at all.  
USB hubs may prevent a device from working because of the distribution of power. We recommend you connect the  
device directly to the computer without a hub.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
143  
Trademarks  
Sony, Click to DVD, DVgate Plus, Keyboard Utility, Memory Stick Formatter, Prepare your VAIO, SonicStage, SonicStage  
Mastering Studio, VAIO Control Center, VAIO Edit Components, VAIO Media, Image Converter, My Club VAIO,  
VAIO Update, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation.  
Intel and Pentium are trademarks or registered trademarks of Intel Corporation.  
Microsoft, Internet Explorer, Windows Movie Maker, Windows Media Player, Windows XP Professional,  
Windows XP Home Edition, Windows XP Media Center Edition, MS Works 8.0, Microsoft Office 2003 SBE (Try & Buy) and  
the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries.  
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394 connection.  
Adobe, Adobe Acrobat Elements, Adobe Acrobat Professional, Adobe Reader, Adobe Premiere Elements and  
Adobe Photoshop Elements are trademarks of Adobe Systems Incorporated.  
Norton Internet Security and Norton Password Manager are trademarks or registered trademarks of Symantec Corporation.  
WinDVD for VAIO is a trademark of InterVideo, Inc.  
Sun Java VM is a trademark of Sun Microsystems, Inc.  
Google Toolbar is a trademark of Google.  
Yahoo! Messenger is a trademark of Yahoo!.  
My Club VAIO uses Macromedia Flash™ Player software by Macromedia, Inc., Copyright © 1995-2003 Macromedia, Inc. All  
rights reserved. Macromedia and Flash are trademarks of Macromedia, Inc.  
All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or ®  
marks are not specified.  
Specifications are subject to change without notice. All other trademarks are trademarks of their respective owners.  
Please see the online Specifications to see what software is available for your model.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Sherwood Stereo Receiver 5227 00000 041 0S User Manual
Sigma MP3 Player H F1381 User Manual
Snapper Portable Generator PP5001 User Manual
Sony Camcorder PMW 320K User Manual
Sony Webcam SXV M5C User Manual
Stamina Products Elliptical Trainer 4825 User Manual
Star Micronics Printer TSP552 User Manual
Sunbeam Humidifier SCM631 CN User Manual
Tanaka Brush Cutter TBC 262 User Manual
T Fal Beverage Dispenser BeerTender User Manual