2-670-907-12(1)
LCD Digital Color TV
Operating Instructions
KDL-26S2000 KDL-32S2000
KDL-40S2000
© 2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
s
s
Avoid operating the TV at temperatures
below 41°F (5°C).
WARNING
NOTIFICATION
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
If the TV is transported directly from a
cold to a warm location, or if the room
temperaturechanges suddenly, the picture
may be blurred or show poor color due to
moisture condensation. In this case,
please wait a few hours to let the moisture
evaporate before turning on the TV.
To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the TV in a room where the floor
and walls are not of a reflective material.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
s
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
CAUTION
Use the following Sony appliance(s) only with
the following WALL-MOUNT BRACKET.
s
s
s
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Sony Appliance Model No.
KDL-26S2000 KDL-40S2000
KDL-32S2000
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
Sony
Wall-Mount
Bracket
Model No.
s
Consult the dealer or an experienced
radio/TV technician for help.
SU-WL31
SU-WL51
Pursuant to FCC regulations, you are
cautioned that any changes or modifications
not expressly approved in this manual could
void your authority to operate this
equipment.
Use with other WALL-MOUNT BRACKET
may cause instability and possibly result in
injury.
appliance.
CAUTION
To prevent electric shock, do not use this
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
To Customers
Sufficient expertise is required for installing the
specified product. Be sure to subcontract the
installation to Sony dealers or licensed
contractors and pay adequate attention to safety
during the installation.
For Customers in Canada
This Class B digital apparatus complies with
Canadian ICES-003.
Note on Caption Vision
This TV provides display of TV closed
captioning in accordance with §15.119 of the
FCC rules.
Safety
s
Operate the TV only on 120-240 V AC.
For Customers in the United
States
This product contains mercury. Disposal of this
product may be regulated if sold in the United
States. For disposal or recycling information,
please contact your local authorities or the
Electronics Industries Alliance
s
Use the AC power cord specified by Sony
and suitable for the voltage where you use
it.
For Customers in the United
States
If you have any questions about this product,
you may call; Sony Customer Information
Services Center 1-800-222-7669 or
s
s
The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully into
the outlet, contact your dealer.
If any liquid or solid object should fall
inside the cabinet, unplug the TV
immediately and have it checked by
qualified service personnel before
operating it further.
(http://www.eiae.org).
Note
This television includes a QAM demodulator
which should allow you to receive unscrambled
digital cable television programming via
subscription service to a cable service provider.
Availability of digital cable television
programming in your area depends on the type
of programming and signal provided by your
cable service provider.
Declaration of Conformity
Trade Name: SONY
s
s
If you will not be using the TV for several
days, disconnect the power by pulling the
plug itself. Never pull on the cord.
For details concerning safety precautions,
Model: KDL-26S2000/KDL-32S2000/
KDL-40S2000
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
Installing
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause
undesired operation.
s
s
s
The TV should be installed near an easily
accessible power outlet.
To prevent internal heat buildup, do not
block the ventilation openings.
Do not install the TV in a hot or humid
place, or in a place subject to excessive
dust or mechanical vibration.
(Continued)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademark Information
TruSurround XT, SRS and (
) symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs,
Inc.
Important
Safety
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of the following US
patents: 5510752, 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
Macintosh is a trademark licensed to Apple Computer, Inc., registered in
the U.S.A and other countries.
Instructions
“BRAVIA” and
are trademarks of Sony Corporation.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
As an ENERGY STAR® Partner, Sony Corporation has
determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
ENERGY STAR® is a U.S. registered mark.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
This TV incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
AC power cord
Use
If you damage the AC power cord, it may result in a fire or an electric
shock.
For the unit with a three-wire grounding type
AC power cord plug (Class 1 unit)
This unit must be connected to an AC power socket
outlet with a protective earthing connection.
s
Do not pinch, bend, or twist the cord excessively. The core lines
may be bared and cut, and cause a short-circuit, resulting in a fire
or an electric shock.
s
s
Do not convert or damage the AC power cord.
Do not put anything heavy on the AC power cord. Do not pull the
AC power cord.
Wall outlet
Do not use a poor fitting outlet.
s
s
Keep the AC power cord away from heat sources.
Be sure to grasp the plug when disconnecting the AC power cord.
Insert the plug fully into the outlet. If it is loose, it may
cause arcing and result in a fire.
If the AC power cord is damaged, stop using it and ask your dealer or
Sony service center to exchange it.
Contact your electrician to have the outlet changed.
Batteries
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or overheat the batteries.
Wiring
Caution
For your safety, unplug the AC power cord when wiring cables.
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
Electric shock
Do not touch the AC power cord or the unit with a
wet hand. If you plug/unplug the AC power cord
from the unit with a wet hand, it may cause electric
shock.
Disposal of used batteries
To preserve our environment, dispose of used batteries according to your
local laws or regulations.
Cleaning
Objects and ventilation holes
s
Clean the AC power plug regularly.
If the plug is covered with dust and it picks
up moisture, its insulation may deteriorate
and result in a fire. Unplug the AC power
plug and clean it regularly.
Never push objects of any kind into the unit through
the cabinet slots as they may touch dangerous
voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind
on the unit.
Do not place any objects on the unit.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
s
s
Unplug the AC power cord when
cleaning this unit. If not, it may result
in electric shock.
Clean the cabinet of the TV with a dry
soft cloth. To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with
Attachments
a cloth slightly dampened with a solution of mild soap and warm
water. Never use strong solvents such as thinner or benzine for
cleaning.
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
s
s
If using a chemically pretreated cloth, please follow the
instruction provided on the package.
If the picture becomes dark after using the TV for a long period of
time, it may be necessary to clean the inside of the TV. Consult
qualified service personnel.
Medical institution
Do not place this unit in a place where medical
equipment is in use.
Magnetic influence
This TV contains a strong magnet in the speaker unit that generates a
magnetic field. Keep any items susceptible to magnetic fields away from
the speaker.
It may cause a malfunction of medical instruments.
Sound
If a snapping or popping sound from the TV is
continuous or frequent while the TV is operating,
unplug the TV and consult your dealer or service
technician. It is normal for some TV’s to make
occasional snapping or popping sounds,
Moisture and flammable objects
s
Do not use power-line operated sets near
water — for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
It may result in a fire or an electric shock.
particularly when being turned on or off.
s
s
Do not let this unit get wet. Never spill liquid
of any kind on the unit. If any liquid or solid
object does fall through, do not operate the
unit. It may result in electric shock or
damage to the unit. Have it checked
immediately by qualified personnel.
To prevent fire, keep flammable objects or open flame (e.g.
candles) away from the unit.
(Continued)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
s
When transporting, do not subject the unit to shocks or vibration,
or excessive force.
Broken pieces
Do not throw anything at the unit.
The screen glass may break by the impact and cause serious injury.
Installation
When installing or removing the TV on the
wall, be sure to use qualified contractors.
Wall mount installation requires the use of
a wall-mount bracket. If the TV is installed
or removed from the wall by a person other
than a qualified contractor, the unit may fall
and cause serious injury if the unit is not
installed securely.
Cable wiring
Take care not to catch your feet on the cables. It may damage the unit.
Volume adjustment
s
s
Adjust the volume so as not to trouble your neighbors. Sound
carries very easily at night time. Therefore, closing the windows
or using headphones is suggested.
When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
Placement for viewing
It is recommended to watch the TV at a distance of 3 - 7 times that of the
screen height, and in moderate brightness. Watching the TV for too long
or in a dark room will cause eye fatigue.
Disposal of the TV
s
s
Do not dispose of the TV with general household waste.
The LCD contains a small amount of liquid crystal. The
fluorescent tube used in this display also contains mercury. Follow
your local ordinances and regulations for disposal.
Optional accessories
Observe the following when installing the TV using a
wall-mount bracket. If the TV is not secured properly,
it may fall and cause injury.
Handling of broken glass and liquid crystal
leakage
s
Be sure to follow the operating instructions
supplied with the wall-mount bracket when
installing the unit.
If the LCD panel gets damaged, crystalline liquid leakage may occur, or
scattered broken glass may result. Do not touch broken glass or
crystalline liquid (which is toxic), with bare hands as cuts or poisoning/
skin irritation may occur. Also, do not let glass fragments or leaked
crystalline liquid get into your eyes or mouth. Should either contact your
eyes or mouth, rinse the contacted area thoroughly with water and
consult your doctor.
s
Be sure to attach the brackets supplied with the
wall-mount bracket.
Oils
Do not install this unit in restaurants where oily vapors occur. Dust
absorbing oil may enter into the unit and damage the unit.
Corrosion
LCD screen
If you use this unit near the seashore, salt may corrode metal parts of the
unit and cause internal damage or fire.
s
Although the LCD screen is made with high-precision technology
and has effective pixels of 99.99% or more, black dots or bright
points of light (red, blue, or green) may appear constantly on the
LCD screen. This is a structural property of the LCD panel and is
not a malfunction.
It may also shorten the life of the unit.
Ventilation
The slots and openings in the TV are provided for necessary ventilation.
To ensure reliable operation of the unit, and to protect it from
s
s
Do not expose the LCD screen surface to the direct sun light.
Doing so may damage the LCD panel.
Do not push or scratch the LCD screen, or place objects on top of
the TV. The image may be uneven or the LCD panel may be
damaged.
overheating, these slots and openings must never be blocked or covered.
Unless proper ventilation is provided, the unit may
gather dust and get dirty. For proper ventilation,
observe the following:
s
If the TV is used in a cold place, a smear may occur in the picture
or the picture may become dark. This does not indicate a failure.
These phenomena improve as the temperature rises.
s
s
s
Do not install the unit turned backward or
sideways.
Do not install the unit turned over or upside
down.
Never cover the slots and openings with a
cloth or other materials.
s
s
s
s
Ghosting may occur when still pictures are displayed
continuously. It should disappear after a few moments.
The screen and cabinet get warm when the TV is in use. This is not
a malfunction.
Avoid spraying insect repellent with volatile material to the
screen.
Avoid prolonged contact with rubber or plastic made material.
Fluorescent lamp
This TV uses a special fluorescent lamp as its light source. If the screen
image becomes dark, flickers, or does not appear, the fluorescent lamp
has run down and should be replaced. For replacement, consult qualified
service personnel.
s
s
Never block the slots and openings by
placing the unit on a bed, sofa, rug or
other similar surface.
Carry the TV in the specified manner
Carrying the TV requires at least two people.
If you carry the TV in a manner other than that specified and without the
specified number of persons, it may drop and serious injury may result.
Never place the unit in a confined space, such
as a bookcase or built-in cabinet, unless
proper ventilation is provided.
s
Carry the TV with the specified number of
persons.
s
Carry the TV holding the upper and bottom
frames of the TV as illustrated.
Hold the TV securely when carrying it.
As the glass surface of the TV has a special
coating, be careful to avoid touching the glass surface as much as
possible.
s
s
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on a level surface
If you install the unit on an inclined surface, the unit
may fall or drop and cause injury or damage.
When installing the unit on the wall, allow this much space.
30 cm
7
(11 /8 inches)
Placing on a stable surface
If you place the unit on an unstable surface, the unit
may fall and cause injury or damage.
10 cm
(4 inches)
10 cm
(4 inches)
Fall
10 cm (4 inches)
Do not hang anything on the unit.
The unit may fall from the stand or wall-mount,
causing damage or serious injury.
When installing the unit using a stand, allow this much space.
30 cm
7
AC power cord
(11 / inches)
8
Unplug the AC power cord when moving the unit.
Do not move the unit with the AC power cord
plugged in. It may damage the AC power cord and
result in a fire or an electric shock.
10 cm
(4 inches)
10 cm
(4 inches)
15 cm
(6 inches)
Do not allow anything to rest on or roll over the
power cord, and do not place the unit where the
power cord is subject to wear or abuse.
Antennas
Never install the unit as follows:
Air circulation is blocked.
Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions below. An
outdoor antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can come
in contact with such power lines or circuits.
Air circulation is blocked.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT
WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in USA and Section
54 of the Canadian Electrical Code in Canada provides information with
respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Outdoor use
Do not install this unit outdoors. If the unit is exposed
to rain, it may result in a fire or an electric shock. If the
unit is exposed to direct sunlight, the unit may heat up
and cause damage to the unit.
Antenna Grounding According to the National
Electrical Code, ANSI/NFPA 70
Vehicle and ceiling
Do not install this unit in a vehicle or hang from the
ceiling.
Antenna lead-in wire
Ground clamps
Bumping of the vehicle may cause the unit to fall down
and cause injury.
Ship and vessel
Do not install this unit in a ship or vessel. If the unit is
exposed to seawater, it may cause a fire or damage the
unit.
Antenna discharge unit
(NEC Section 810-20)
Electric service
equipment
Grounding conductors
(NEC Section 810-21)
Ground clamps
Power service grounding
electrode system
Preventing the TV from toppling over
Take measures to prevent the unit from toppling over and causing injury.
To prevent the unit from toppling over, secure the unit to the wall or
pillar.
(NEC Art 250 Part H)
NEC: National Electrical Code
(Continued)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Lightning
For added protection for this TV during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna. This will prevent damage to the
receiver due to lightning and power-line surges.
Damage requiring service
If the surface of the TV cracks, do not touch it until you unplug the AC
power cord.
Otherwise electric shock may result.
Servicing
Do not attempt to service the unit yourself since opening
the cabinet may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Replacement parts
When replacement parts are required, be sure the
service technician certifies in writing that he/she has
used replacement parts specified by the manufacturer
that have the same characteristics as the original parts.
Unauthorized substitutions may result in a fire, an
electric shock or other hazards.
Safety check
Upon completion of any service or repairs to the unit,
ask the service technician to perform routine safety
checks (as specified by the manufacturer) to
determine that the unit is in safe operating condition,
and to so certify. Ask a qualified service technician to
dispose of the unit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Cable System or VHF/UHF Antenna System............................................................10
Cable Box/Digital Cable Box.....................................................................................10
VCR, Cable and Antenna..........................................................................................12
When Connecting to Optional Equipment...................................................................13
Bundling the Connecting Cables...............................................................................16
Adjusting the Viewing Angle of the TV......................................................................16
Navigating Through Settings........................................................................................24
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the TV
To display clear crisp pictures, you must connect your TV correctly and
select the correct Wide Mode to display the picture in the correct aspect
recommended to connect the antenna/cable input using the supplied 75-ohm
coaxial cable to receive optimum picture quality signal. A 300-ohm twin
lead cable can be easily affected by radio noise and the like, resulting in
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far
away from the TV as possible.
You can also connect a variety of optional equipment to your TV (see page
13). For multiple equipment connections, please refer to the Quick Setup
Guide.
Cable System or
VHF/UHF Antenna
System
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
Rear of TV
VHF/UHF input
cable (supplied)
From the Setup settings, select Cable On or Cable Off for your type of input signal.
Cable Box/Digital
Cable Box
Use this hookup if
s
You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
z To change channels using
the cable box, set your TV
to channel 3 or 4
s
You do not intend to hook up any other audio or video equipment to
your TV.
depending on the cable
box channel output.
Auto Scan will fix the
channel automatically.
75-ohm coaxial
cable (supplied)
Cable
Rear of TV
VHF/UHF input
IN
jack
OUT
jack
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Cable System and
VHF/UHF Antenna
System
If you want to watch both antenna (over-the-air) and cable broadcast signals,
you’ll need to use an optional A-B RF switch (not supplied), as shown
below.
Use the A-B selector to switch between the
over-the-air signals and the cable signals. Then
set the Cable setting in the Setup settings to On
A/B
RF Switch
Cable
Rear of TV
VHF/UHF input
A
B
Antenna
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Satellite Receiver
and Cable/Antenna
Satellite
antenna
cable
Satellite Receiver
CATV/Antenna
cable (supplied)
VHF/UHF
HD/DVD IN
VIDEO IN
S VIDEO
(1080i/720p/480p/480i)
1
3
5
4
Y
S VIDEO
OPTICAL OUT
(VAR/FIX)
PB
VIDEO
(yellow)
S VIDEO cable
A/V cable
VIDEO
PR
L
AUDIO OUT
L
(MONO)
AUDIO-L
(white)
AUDIO-R
(red)
AUDIO
AUDIO
R
R
Rear of TV
If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
Run the Initial Setup program, as described in “Setting Up the Channel
VCR, Cable and
Antenna
VCR
CATV cable
Antenna cable
(supplied)
VHF/UHF
HD/DVD IN
VIDEO IN
(1080i/720p/480p/480i)
1
3
5
4
Y
S VIDEO
S VIDEO
OPTICAL OUT
PB
VIDEO
(yellow)
S VIDEO cable
A/V cable
VIDE
PR
L
(VAR/FIX)
AUDIO OUT
L
(MON)
AUDIO-L (white)
AUDIO-R (red)
AUDIO
AUDIO
R
R
Rear of TV
If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
Run the Initial Setup program, as described in “Setting Up the Channel
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
When Connecting to Optional Equipment
Left side
Rear
7
6
VIDEO 2
IN
4
5
RGB
1
2
R-AUDIO-L
S VIDEO
AUDIO
VIDEO
IN
PC IN
L (MONO)
R
AUDIO
0
HD/DVD IN
VIDEO IN
S VIDEO
3
qa
(1080i/720p/480p/480i)
3
1
5
4
Y
OPTICAL OUT
(VAR/FIX)
6
7
PB
VHF/UHF
9
8
VIDEO
PR
L
AUDIO OUT
L
(MONO)
qs
AUDIO
R
AUDIO
R
Item
Description
1 VIDEO 2 IN
Connects to the S VIDEO output jack on your camcorder or other video equipment that has
S VIDEO
S VIDEO. Provides better picture quality than composite video (2). (See Auto YC on page
30.)
2
VIDEO 2 IN
VIDEO/
Connect to the composite video and audio output jacks on your camcorder or other video
equipment such as video game equipment.
L (MONO)-
R AUDIO
If you have mono equipment, connect its audio output jack to the TV’s L (MONO)
audio input jack.
3 Headphones
Connects to your headphones. If your headphones do not match the jack, use a suitable plug
adapter (not supplied).
jack
4 PC IN 7
Connect to a personal computer’s video output connector using HD15-HD15 cable (analog
RGB, supplied). Can also be connected to other Analog RGB devices such as video
conferencing or set-top boxes.
(RGB/AUDIO)
See “PC Input Signal Reference Chart” on page 41 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter
(not supplied). If this is the case, connect the adapter to the computer before
connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust the Phase and Pitch of the PC
Settings on page 34.
(Continued)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Item
Description
5 HDMI IN 6
HDMI/
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment, such
as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition
video, plus digital audio.
R-AUDIO-L
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN
(with HDMI-to-DVI cable and/or adapter) jack, and connect the audio jack to the AUDIO
IN(L/R) jacks of HDMI IN. (DVI connector is for video signals only.)
HDMI-to-DVI cable
HDMI adapter
Audio cable
Do not connect a PC to the TV’s HDMI input. Use the PC IN (RGB IN) connector
instead when connecting a PC.
6 VIDEO IN 1
Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO
S VIDEO. S VIDEO provides better picture quality than the composite video (7).
Component video (YP P ) or HDMI connection is necessary to view 480p, 720p,
B
R
and 1080i formats. Note that this TV displays all format types of picture in a
resolution of 1,366 dots × 768 lines.
7 VIDEO IN 1/3
VIDEO/
Connect to the composite video and audio output jacks on your A/V equipment such as a VCR
or other video equipment. A third composite video and audio (VIDEO 2) is located on the left
side panel of the TV.
L(MONO)-
AUDIO-R
8 AUDIO OUT
Connect to the left and right audio input jacks of your audio or video equipment. You can use
these outputs to listen to your TV’s audio through your stereo system.
(VAR/FIX)
9 OPTICAL OUT Connects to the optical audio input of a digital audio equipment that is PCM/Dolby digital
*
(PCM/DOLBY
DIGITAL)
compatible. (OPTICAL OUT is only available for digital channels.)
0 HD/DVD IN 4/5 Connect to your DVD player’s or digital set-top box’s component video (YPBP ) and audio
R
(1080i/720p/
480p/480i)/
L-AUDIO-R
(L/R) jacks. Component video provides better picture quality than the S VIDEO (6) or the
composite video (7) connections.
qa AC IN
qs VHF/UHF
Connects the supplied AC power cord.
RF input that connects to your cable or VHF/UHF.
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Installing the TV
Preventing the TV
from Toppling Over
Attaching the Support Belt
1
2
3
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.
Adjust the length by pulling the support belt towards you while holding
the TV stand.
Be sure to take measures to prevent the TV from toppling over and
causing injury.
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough,
prepare commercial screws to fit to the TV stand. Use commercial
screws of 3 to 4 mm (1/8 to 3/16 inches) diameter. Consult your dealer
about the types of screw.
When Mounting on a Wall
Refer to the Instruction Guide supplied with the wall-mount bracket on how
to mount the TV to the wall.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Bundling the
You can bundle the connecting cables as illustrated below.
Connecting Cables
1
2
3
Do not bundle the AC power cord in the stand with other connecting
cables.
Adjusting the
Viewing Angle of the
TV
This TV can be adjusted within the angles shown below.
Adjust the angle left and right (swivel)
Top view
15°
15°
15°
15°
Front
When adjusting the angle, hold the stand with one hand
to avoid slipping or tipping the stand.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting Up the Channel List - Initial Setup
After you finish connecting your TV, you need to run Initial Setup, which
automatically sets up available channels. The Initial Setup screen appears
when you turn on your TV for the first time. If you do not want to set up the
channels at this time, you can do it later by selecting the Auto Program
The default setting for channel selection is Cable On. For antenna
connections, run the Auto Program again after selecting Cable Off from
the Setup settings.
POWER
1
2
Press
to turn on the TV.
The Initial Setup screen appears.
Press V/v to highlight the on-screen display language. Then press
.
The message “First please connect cable/antenna. Do you want to start
Auto Program?” appears.
3
4
Press B/b to highlight “OK” then press
.
The message “Auto Program” appears. Then the message “Continue
programming digital channels?” appears. This may require 50+ minutes
for completion.
Press B/b to highlight “OK” then press
.
If you selected “Cancel” during the Initial Setup, the Initial Setup
message will appear each time you turn on the TV as a reminder until
you complete the Auto Program.
To run Auto Program again at a later time
❑
To add individual digital channels
❑
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Remote Control
Button
Description
1 TV/VIDEO
Press repeatedly to cycle through the video inputs.
including the skip function.
1
2
3
2 SLEEP
Press repeatedly until the TV displays the time in minutes (15,
30, 45, 60, 90 or 120) that you want the TV to remain on
before shutting off. To cancel Sleep Timer, press SLEEP
repeatedly until Sleep Off appears.
4
5
3 FREEZE
Press once to display a frozen image of the current program in
a window. Press again to show only the frozen image. Press
again to return to the program.
Freeze
Current program
Frozen picture
Move the sub screen with V v B b.
With Freeze function active, some functions are
unavailable, such as MENU.
4 PICTURE
Press repeatedly to cycle through the available picture modes:
Vivid, Standard, Custom. The picture modes can be also
5 GUIDE
Press to display the Guide when you are watching digital
channels (if it is available from the station).
Using the Guide
The Guide allows you to select the channels from a channel
list. The Guide also provides information about the current
program being shown on each channel.
z The 5 button and CH +
have a tactile dot. Use
them as a reference when
operating the TV.
Make Way for Ducks!
C23.1
Information
banner
Series follows the aquatic misadventures of Henry and Riley, two
FAM
wayward ducks on
a
unique mission.
CC
Alt. Audio
TV-G
Time remaining: 1:26
1
ABC
DISC
FAM
10
23.1
36
Channel
list
Audio
Audio
1
2
Englsih
English
Alternate Audio
TLC
65
HIST
SHOW
68
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Button
Description
Program information in the guide is provided by the
broadcasters. As a result, it may sometimes include
only the channel number, without a program title or
description.
qs
Using the Program Options Setting
The Program Options setting allows you to customize the
program settings on the currently tuned channel.
Each program has a main video and audio
stream (the video or audio that you see or hear
when the channel is first tuned), and may have
alternate streams. This option allows you to
switch among the alternate audio stream, when
the broadcaster provides an alternate audio
stream (for instance, the audio may contain a
different language).
Alternate
Audio
(When
6
7
8
available)
6 RETURN
Press to go back to the previous screen when displaying
MENU items and settings.
9
7 MENU
Press to display the MENU with TV functions and settings.
0
qa
8 DIGITAL/
Press to switch between analog and digital channels.
ANALOG
To enjoy the digital features of this TV, press
DIGITAL/ANALOG.
9
Use with 0-9 and ENT buttons to select digital channels. For
example, to enter 2.1, press 2 ,
,
1
and ENT.
0 VOL +/–
Press to adjust the volume.
qa MUTING
Press to mute the sound. Press again or press VOL + to restore
the sound.
qs POWER
Press to turn on and off the TV.
(Continued)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Button
Description
qd WIDE
Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode settings
Changing the Wide Screen Mode
qd
4:3 Original source
Standard definition source
16:9 Original source
High definition source
qf
qg
m
m
qh
Wide Zoom
Wide Zoom
qj
Normal
Full
Normal
qk
ql
This mode is not available
Full
Zoom
Zoom
qa
When the TV receives a 720p or 1080i signal,
Normal cannot be selected.
qf DISPLAY
Press once to display the current channel number, channel
label, time and Wide Mode settings. The OSD (on screen
display) will turn off after a few seconds or press again to
immediately turn off the display.
qg V/v/B/b
Press V/v/B/b to move the on-screen cursor. Press
select/confirm an item.
to
qh TOOLS
Press to display the Tools Menu that is associated with your
current input: Analog TV, Digital TV, External Inputs, or PC.
qj JUMP
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that
was selected.
qk 0 - 9 ENT
Press 0 - 9 to select a channel; the channel changes after two
seconds. Press ENT to change channels immediately.
ql CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
Insert two size AA batteries (supplied) by matching the e and E
on the batteries to the diagram inside the remote control’s battery
compartment.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
TV Controls
1
2
3
4
5
MENU
TV/VIDEO
VOLUME
CHANNEL
POWER
0
PIC OFF/TIMER
STANDBY
POWER
6
7
8
9
Item
Description
1 MENU
2
Press to cycle through the video inputs. If you set a certain input to Skip in Label Video
Inputs, then the input will not appear.
TV/VIDEO
In the MENU screen, this button serves as confirming the selection or setting.
3
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
– VOLUME +
4
Press to scan through channels. To scan quickly through channels, press and hold down either
– CHANNEL + –/+. In the MENU screen, these buttons serve as up/down buttons.
5 POWER
Press to turn on and off the TV.
6 (IR) Infrared
Receiver/
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Light Sensor
7 PIC OFF/
Lights up in green when the Picture Off feature is activated. Lights up in orange when the
timer is set. When the timer is set, this LED will remain lit even if the TV is turned off. For
TIMER LED
8 STANDBY LED Lights up in red when your TV is in PC power saving mode. If the LED blinks in red continuously,
this may indicate the display unit needs servicing (see “Contacting Sony” on page 2).
9 POWER LED
Lights up in green when the TV is turned on.
Outputs audio signal.
0 Speaker
The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV.
Make sure that the TV is completely switched off before unplugging the power cord. Unplugging the power
cord while the TV is turned on may cause the LED to remain lit or may cause the TV to malfunction.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Overview of MENU
MENU provides one button access for controlling your TV. It enables you to perform a variety of tasks
intuitively with a control panel on the screen rather than a variety of remote control button presses.
When you press the MENU button, you can easily perform basic TV functions such as: switching
between external inputs, viewing your favorite analog/digital stations, switching between analog and
digital channels, and changing or customizing your TV settings.
1
Press MENU on the remote.
MENU control panel appears.
MENU
External Inputs
Analog Favorites
Digital Favorites
Analog
2
3
Press V/v to highlight the item.
Press
to select an option.
Press MENU to exit.
Digital
2, 3
1
Settings
Select from connected equipment
Select:
Set:
Exit: MENU
MENU
Allows you to
The External Inputs feature lets you select the external
inputs connected to your TV. You can also assign a label
using Label Video Inputs in the Setup settings.
External Inputs
Return
Video 1 VCR
Video 2 GAME
External Inputs
Video 3
Video 4
Video 5
Video 6
Video 7
-
-
-
-
-
1
Highlight External Inputs on the MENU control
panel and press
.
Edit Video Labels
2
Press V/v to highlight the desired external input and
press
.
MENU
Select:
Set:
Exit:
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
MENU
Allows you to
The Analog Favorites feature lets you select programs from a list
Analog Favorites
of up to 16 favorite channels that you specify.
Return
Add to Favorites
1
Highlight Analog Favorites on the MENU control panel
and press
Press V/v to highlight the desired channel and press
To add the current channel to the list of Favorite Channels,
highlight Add to Favorites and press
When the Favorite Channels list is full, remove a channel
1
2
3
4
5
6
7
8
28 : -----
60 : -----
28 : -----
65 : -----
68 : -----
28 : -----
-- : -----
-- : -----
Analog Favorites
.
2
.
.
Edit Favorites
Exit: MENU
Select:
Set:
settings and try again. Favorite Channels can be accessed directly from Edit
Favorites.
Favorite Channels
The Digital Favorites feature lets you create a list of up to 16
favorite channels. To create your favorite list:
Add to Favorites
Edit Favorites
Exit
1
Highlight Digital Favorites on the MENU control panel
and press
Highlight Add to Favorites and press
current channel to the list of Favorite Channels.
Digital Favorites
.
2
to add the
When the Favorite Channels list is full, remove a channel from your list using
Favorite Channels can be accessed directly from Edit Favorites.
The Analog feature takes you to the most recently viewed analog channel. When
tuned to the channel, Channel number will be displayed.
Highlight Analog on the MENU control panel and press
.
Analog
Digital
The Digital feature takes you to the most recently viewed digital channel. When
tuned to the channel, the Program Banner and Channel number will be displayed.
Highlight Digital on the MENU control panel and press
.
The Settings feature lets you enter to the settings screen. Advanced settings and
Settings
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Navigating Through Settings
The Settings provides access to the features:
MENU
1
2
3
4
Press
.
Select
.
Highlight the item: Picture, Sound, Screen, Setup, PC Settings, Analog Setup, Digital Setup.
Press
to select an option.
MENU
To exit the settings, press
.
The options you can adjust vary depending on the situation. Unavailable options are grayed out.
Using the Picture Settings
Picture
Target Inputs
Picture Mode
Reset
All Inputs
Vivid
Backlight
Max
Max
40
Picture
Brightness
Color
60
Hue
0
Color Temperature
Sharpness
Noise Reduction
Advanced Settings
Cool
18
Low
A
D
Select:
Set:
Back: RETURN Exit: MENU
Option
Description
Target Inputs
Determines whether to apply Picture menu settings to all inputs, or only to the input you are
currently watching.
All Inputs
Current Input
Vivid
Applies settings to all inputs.
Applies settings to the current input.
Select for enhanced picture contrast and sharpness.
Picture
Mode
Customized picture
viewing
Standard
Select for standard picture settings. Recommended for home
entertainment.
Custom
Allows you to store your preferred settings.
Picture Mode can also be accessed from TOOLS button when in Analog TV,
Digital TV and External Inputs.
Reset
Resets the current Picture Mode setting to the default values.
Adjust to brighten or darken the backlight.
Adjust to increase or decrease picture contrast.
Adjust to brighten or darken the picture.
Backlight
Picture
Brightness
Color
Adjust to increase or decrease color intensity.
Adjust to increase or decrease the green tones.
Hue
Color Temperature
White adjustment
Cool
Select to give the white colors a bluish tint.
Select to give the white colors a neutral tint.
Neutral
Warm 1,2
Select to give the white colors a reddish tint. Available only when
Picture Mode is set to Custom.
Sharpness
Adjust to sharpen or soften the picture.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
Noise Reduction
Select to reduce the noise level of connected equipment, and the VHF/UHF input. Select
from Auto, High, Medium, Low and Off.
Auto is only available when you are watching analog channels. It is not available
when Target Input is set to All Inputs.
Advanced Settings
Only available in
“Custom Picture Mode”
Reset
Resets all the advanced settings to the default settings.
Enhances black areas of the picture for stronger contrast.
Black Corrector
Contrast
Automatically optimizes the backlight and contrast. This setting is
Enhancer
especially effective for dark images, increasing the vibrancy of the picture.
Gamma
Adjusts the balance between the light and dark areas of the picture.
Emphasizes white and light colors.
Clear White
Live Color
Makes colors more vivid.
MPEG Noise
Reduction
Reduces the picture noise in MPEG-compressed video.
Useful for Digital TV channels.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Using the Sound Settings
Sound
Target Inputs
Sound Mode
Reset
All Inputs
Dynamic
Treble
0
Bass
0
Balance
Steady Sound
Surround
BBE
0
Off
Off
High
MTS
A
D
Select:
Set:
Back: RETURN Exit: MENU
Option
Description
Target Inputs
Determines whether to apply Sound menu settings to all inputs, or only to the input you are
currently watching.
All Inputs
Current Input
Dynamic
Standard
Custom
Applies settings to all inputs.
Applies settings to the current input.
Select to enhance treble and bass.
Suitable for spoken dialog.
Sound Mode
Customized
sound listening
Flat setting. Allows you to store your preferred settings.
Sound Mode can also be accessed from TOOLS button when in Analog TV,
Digital TV and External Inputs.
Reset
Resets the current Sound Mode setting to the default values, except MTS.
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
Treble
Bass
Balance
Steady Sound
On
Off
Select to stabilize the volume across all programs and commercials.
Select to turn off Steady Sound.
Surround
BBE
TruSurround XT Select for surround sound (for stereo programs only).
Simulated Stereo Adds a surround-like effect to mono programs.
Off
Select for normal stereo or mono reception.
Select to give sound more impact by compensating for phase effects in speakers. Select from
High, Low, and Off.
MTS
Stereo
Select for stereo reception when viewing a program broadcast in stereo.
Enjoy stereo, bilingual
and mono programs
Auto SAP
Select to automatically switch the TV to second audio programs when a
signal is received. If no SAP signal is present, the TV remains in Stereo
mode.
Mono
Select for mono reception. Use to reduce noise during weak stereo
broadcasts.
MTS is only available for analog programs.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Using the Screen Settings
Screen
Target Inputs
Wide Mode
Current Input
Normal
On
Auto Wide
4:3 Default
Normal
Normal
0
Display Area
Horizonal Center
Vertical Center
Vertical Size
A
D
Select:
Set:
Back: RETURN Exit: MENU
Option
Description
Target Inputs
Wide Mode
Determines whether to apply Screen menu settings to all inputs, or only to the input you are
currently watching.
All Inputs
Applies settings to all inputs.
Current Input
Wide Zoom
Normal
Applies settings to the current input.
Select to fill screen with minimum distortion.
Select to display 4:3 picture in original size when the original source is
4:3.
Normal is not available when you are watching 720p or 1080i sources.
Full
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original
source is 16:9 (High definition source), select this mode to display 16:9
picture in original size.
Zoom
On
Select to enlarge the original picture without distorting the aspect ratio.
Auto Wide
Select to have the screen automatically change to the screen mode that
is best for the current program. If frequent screen changes are disturbing
to you, select Off.
Off
Select to turn off the Auto Wide option. Choose a screen mode from the
Wide Mode option.
4:3 Default
Wide Zoom
Select to enlarge the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible.
Select the default Screen
Mode to use for 4:3
sources
Normal
Off
Select to display the 4:3 picture in its original size.
Select to continue using the current Wide Mode setting when the
channel or input is changed.
If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for
the current channel. When you change channels (or inputs), Wide Mode is
automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the
current Wide Mode setting as channels and inputs are changed, set 4:3 Default
to Off.
Display Area
Select Normal to return to the default display area. Select -1 or -2 to enlarge the picture so
that the edges are outside the visible portion of the screen.
(Continued)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
Horizontal Center
Allows you to move the position of the picture left and right.
Press B/b and press
to choose a correction between Min, –4 to +4 and Max.
Horizontal Center feature is useful if TV is connected to game equipment.
Vertical Center
Vertical Size
Allows you to move the position of the picture up and down. Available only in Zoom mode.
Press V/v and press
to choose a correction between Min, –4 to +4 and Max.
Allows you to adjust the vertical size of the picture. (Available only in Wide Zoom and
Zoom modes.)
Press V/v and press
to choose a correction between Min, –4 to +4 and Max.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Using the Setup Settings
Setup
Language
English
Caption Vision
Info Banner
Parental Lock
Label Video Inputs
Auto YC
Timer Settings
Power Saving
Light Sensor
Quiet Power On
Speaker
Off
Off
On
On
Audio Out
A
D
Cable
On
Information
Select:
Set:
Back: RETURN Exit: MENU
Option
Description
Select to display all on-screen settings in your language of choice: English Español, Français.
Language
,
Caption Vision
Allows you to select from several closed caption modes (for programs that are broadcast
with closed captioning). Some caption modes for digital channels are only accessible from
Off
Caption Vision is turned off.
CC1, CC2,
Displays a printed version of the dialog or sound effects of a program.
CC3, CC4
(Should be set to CC1 for most programs.)
Text1,Text2,
Text3,Text4
Displays network/station information presented using either half or the
whole screen (if available).
Caption Vision can also be accessed from TOOLS button when in Analog TV
and External Inputs.
Info Banner
Set to On or Off. When on, displays the program name and the remaining time (if the
broadcaster offers this service). Displays for few seconds when the channel is changed or the
DISPLAY button is pressed.
Parental Lock
The Parental Lock settings allows you to set up the TV to block programs according to
their content and rating levels. Use 0-9 on the remote control to enter a four-digit password.
The first time you create a password, confirm the password by entering it again.
Lock
Off
Turn Parental Lock off. No programs are
blocked from viewing.
Child
Maximum ratings permitted are:
U.S.: TV-Y, TV-G, G
Canada: C, G, TV-Y
Youth
Maximum ratings permitted are:
U.S.: TV-PG, PG
Canada: C8+, PG, 8 ans+, TV-PG
Young Adult Maximum ratings permitted are:
U.S.: TV-14, PG-13
Canada: 14+, 13 ans+, TV-14
Custom
Select to set ratings manually.
If you are not familiar with the Parental Guideline rating system, you should
select Child, Youth, or Young Adult to help simplify the rating selection. To set
more specific ratings, select Custom.
(Continued)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
Change
Select to change your password.
Password
You need your password for any future access into the Parental Lock settings. If
Select Country
U.S.A.
Canada
Label Video Inputs
Allows you to identify A/V equipment you connected to the TV, such as a VCR, DVD, etc.
For example, if you have a DVD player connected to the VIDEO 4 jack, you can select the
label DVD for the Video 4 input. Then when you press TV/VIDEO to change inputs, the
Video Label you assigned to that input appears on screen.
1
Press V/v to highlight the video input (Video 1-7) to which you want to assign a label.
Then press to select the input.
Press V/v to highlight one of the displayed labels. Then press
2
to select the label.
You can select from the following labels for each input:
Video 1-6
–, RECEIVER, SATELLITE, CABLE BOX, VCR, DVD, DVR, HD,
GAME, CAMCORDER, Edit:, Skip
Video 7
–, PC, Edit:, Skip
Edit: allows you to create a custom five character label.
If you select Skip, your TV skips this input when you press the TV/VIDEO
button.
The Skip label is useful for inputs to which no equipment is connected.
Auto YC
When connecting both VIDEO IN and S VIDEO IN, you can select the jack from which the
TV receives the input signal. The TV is default set to receive S VIDEO input signals.
1
2
Press TV/VIDEO repeatedly until the desired video input appears.
After selecting the Auto YC option, to watch the pictures input from the S VIDEO
input jack:
Press V/v to highlight On, then press
.
To watch the pictures input from the VIDEO input jack:
Press V/v to highlight Off, then press
.
Timer Settings
Sleep Timer
Set the time in minutes (15 min, 30 min, 45 min, 60 min, 90 min,
120 min, or Off) that you want the TV to remain on before shutting off
automatically.
Timer
You can use the Timer to turn the TV on, turn it off, or tune it to a
specific channel at a scheduled time.
Timer feature will not be available until you set the Current Time.
1
Set:
Press
V
/
v
to highlight one of the following options, then press
.
Select to set the timer by Day, Time, Duration, Channel
and Volume Setup.
Off:
Select to turn off the timer. (Your previous settings are
saved.)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
2
3
If you selected Set in step 1, press V/v/B/b to set the day(s), hour,
minute, AM/PM, duration, channel number (VHF/UHF, CATV or
Digital), and volume.
When Digital is selected, the last digital channel you viewed will
automatically show when the TV is turned on.
Press MENU to exit Settings.
To return to the Timer Settings after programming the Timer or Current Time,
press B.
Timer will be set to Off when:
- Auto Program for analog channels is executed.
- the AC power cord is disconnected and then reconnected to turn the TV on
and the Current Time is displayed as --:-- --.
Current Time
Select to set the current time (day, hour, minute, and AM/PM).
1
2
Press
to select Current Time.
Press V/v/B/b to set the current time (day, hour, minute, and
AM/PM).
3
Press MENU to exit Settings.
Power Saving
Light Sensor
Select to reduce the power consumption by adjusting the backlight brightness. This also
enhances the black level. Select from Off, Low, High and Picture Off.
Select On to enable the automatic picture (screen) brightness control. The light sensor
measures the room brightness which allows the TV to automatically adjust the backlight
brightness based on the picture settings and the ambient room light conditions.
Be sure not to put anything around the sensor, as its function may be affected.
In low light the range of the backlight control is reduced when Light Sensor is
set to On.
Quiet Power On
Speaker
Select to have the TV volume start at the minimum volume and gradually change to the set
level when you turn it on.
On
Off
Select to turn on the TV speakers.
Select to turn off the TV speakers and listen to the TV’s sound only
through your external audio receiver and speakers.
Audio Out
Easy control of volume
adjustments
Variable
Fixed
When Speaker is set to Off, the audio output from your audio system
can be controlled by the TV’s remote control.
When Speaker is set to Off, the audio output of the TV is fixed. Use
your audio receiver’s remote control to adjust the volume (and other
audio settings) through your audio system.
Cable
On
Off
Select if you are receiving cable channels via Cable TV provider.
Select if you are using an antenna.
You should run Auto Program after changing the Cable setting.
Information
Select to display the equipment information of your TV.
(Continued)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
US Models: Selecting Custom Rating Options
To select custom rating options for the U.S., select U.S.A. in the Select Country setting (see page 30).
Option
Description
Movie Rating
G
All children and general audience.
Parental guidance suggested.
PG
PG-13
R
Parental guidance for children under 13.
Restricted viewing, parental guidance is suggested for children under
17.
NC-17 and X
Age-Based Ratings
TV-Y
No one 17 or under allowed.
TV Rating
Block programs by their
rating, content or both
All children.
TV-Y7
Directed to children age 7 and older.
General audience.
TV-G
TV-PG
Parental guidance suggested.
Parents strongly cautioned.
Mature audience only.
TV-14
TV-MA
Content-Based Ratings
FV
D
L
Fantasy violence.
Suggestive dialogue.
Strong language.
S
Sexual situations.
V
Violence.
To ensure maximum blocking capability, set the Age-Based Ratings.
Unrated
Allow
Block
Allows programs and movies that are broadcast without a rating.
Blocks all programs and movies that are broadcast without a rating.
Block programs or
movies that are broadcast
without a rating
If you block unrated TV programs, be aware that the following types of programs
may be blocked: programs broadcast from another country, emergency
broadcasts, political programs, sports, news, public service announcements,
religious programs and weather.
Canadian Models: Selecting Custom Rating Options
To select custom rating options for Canada, select Canada in the Select Country setting (see page 30).
Option
Description
English Rating
C
All children.
C8+
G
Children 8 years and older.
General programming.
Parental guidance.
PG
14+
18+
Viewers 14 and older.
Adult programming.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
French Rating
G
General programming.
8 ans+
Not recommended for young children.
Not recommended for ages under 13.
Not recommended for ages under 16.
Programming restricted to adults.
13 ans+
16 ans+
18 ans+
U.S.A. Rating
Viewing Blocked Programs
You can view blocked programs by entering the password. Press ENT when tuned to a blocked program,
then enter the password. This temporarily turns the parental control feature off. To reactivate the Parental
Lock settings, turn off the TV. When the TV is turned on again, your Parental Lock settings are reactivated.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Using the PC Settings
PC Settings
PC
Wide Mode
Reset
Auto Adjustment
Phase
0
0
0
0
Pitch
Horizontal Center
Vertical Center
Power Management
A
D
Resolution 1024x 768/60Hz
Select:
Set:
Exit: MENU
Option
Description
Wide Mode
Normal
Full1
Select to display in the original image size.
Select to enlarge the picture to fill the display area, keeping its original
horizontal-to-vertical ratio.
Full2
Select to enlarge the picture to fill the display area.
Reset
Resets the current setting to its default setting.
Auto Adjustment
Select to automatically adjust the display position and phase of the picture when the TV
receives an input signal from the connected PC. Note that Auto Adjustment may not work
well with certain input signals. In such cases, manually adjust the options below.
Auto Adjustment for PC can also be set from TOOLS button.
Adjust after Pitch to fine tune overall sharpness.
Phase
Pitch
Adjust uneven sharpness on screen.
Allows you to move the position of the picture left and right.
Horizontal Center
Vertical Center
Press B/b and press
to choose a correction between Min, –49 to +49 and Max.
Allows you to move the position of the picture up and down.
Press V/v and press
to choose a correction between Min, –49 to +49 and Max.
Power Management
On
Select to automatically switch to the power saving mode when there is
no signal input for 30 seconds.
Off
Select to turn off Power Management.
Power Management is not VESA-compliant.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Using the Analog Setup Settings
Analog Setup
Favorite Channels
Auto Program
Show/Hide Channels
Label Channels
A
D
Select:
Set:
Back: RETURN Exit: MENU
Option
Description
Favorite Channels
Lets you set up a list of up to 16 of your favorite channels.
1
Press V/v to highlight a Favorite Channel number (1-16) which you want to make your
Favorite Channel, then press to select it.
Press to scroll through the channels until you find the channel that you would like
to edit and then press to select it.
To select other Favorite Channel numbers, repeat steps 1-2
2
V/v
.
Favorite Channels for Analog TV can also be set from TOOLS button.
Auto Program
Automatically sets up the channel list on the TV for all receivable channels.
Show/Hide Channels Allows you to show or hide channels that appear when you use the CH +/– buttons.
1
2
Press V/v to scroll through the channels until you find the channel you want to show or
hide. Then press to select it.
Press V/v to determine if the channel will be shown or hidden.
To show or hide more channels, repeat steps 1-2.
Channels that you set to be hidden can be accessed only with the 0-9 buttons.
Label Channels
Allows you to assign labels (such as station call letters) to channel numbers.
1
Press V/v to scroll through the channel numbers. Then press
number that you want to assign a label.
to select the channel
2
Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to the
next character. Repeat to add up to 5 characters to the label. Press b to highlight OK
and press
to set.
To assign labels to more channels, repeat steps 1-2.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Using the Digital Setup Settings
Digital Setup
Highlight Digital Setup and press
. The Digital Setup option appears.
Digital Setup
A
D
Select:
Set:
Back: RETURN Exit: MENU
Option
Description
Digital Channels
Favorite
Lets you set up a list of up to 16 of your favorite channels.
Channels
1
Press V/v to highlight a Favorite Channel number (1-16) which
you want to make your Favorite Channel.
2
Enter the number you wish to assign to the channel. Reset will
remove the existing Favorite Channel and Surf will take you to
the Favorite Channel list.
To select other Favorite Channel numbers, repeat steps 1-2.
Select to add digital channels.
Digital Channels Add
Auto Program
Automatically sets up the channel list on the TV for all receivable
digital channels.
Show/Hide
Channels
Allows you to show or hide channels that appear when you use the CH
+/– buttons.
1
Press V/v to scroll through the channels until you find the channel
you want to show or hide.
2
Press
to determine if the channel will be shown or hidden.
To show or hide more channels, repeat steps 1-2.
Channels that you set to be hidden can be accessed only with the 0-9 buttons.
Label Channels Allows you to assign labels (such as station call letters) to channel
numbers.
1
Press V/v to scroll through the channel numbers. Then press
to select the channel number that you want to assign a label.
2
Press V/v to scroll through the label characters (A-Z, 0-9, etc.).
Press b to move to the next character. Repeat to add up to 7
characters to the label. Then press
to set it.
To assign labels to more channels, repeat steps 1-2.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
Digital Setup
Caption Vision
Allows you to select from several closed-caption modes for digital
On
Caption Vision is turned on.
Off
Caption Vision is turned off.
Program
Allows you to set basic and advanced Caption Vision
options. See “Programming Caption Vision” below.
A/V Sync
Off/1/2/3
Use this option to make adjustments to audio and video
synchronization when you have external equipment
connected to OPTICAL OUT of the TV. Select Off
(default setting) to make no adjustments. Select 1, 2 or
3 to adjust so that the video and audio from your
connected external equipment are synchronized with
the video.
Diagnostics
Display diagnostics information about the TV. This can be useful in
providing information to an authorized technician or repair person.
Parental Lock
The Parental Lock option in the Digital Setup settings allows you to set up the TV to
block digital programs that contain digital ratings.
This setting is only available if digital ratings have been downloaded by your TV
Password
If the password has not been set, or to change the password, use
Digital Rating
Off
Turn Parental Lock off. No programs that contain
downloadable ratings are blocked from viewing.
Custom...
Clear All
Select to block programs based on downloadable ratings.
Select to clear the entire downloadable rating system.
This action will delete the current Digital Rating menu and
the menu will no longer be available until the TV is tuned to
a channel that contains downloadable ratings.
Programming Caption Vision
If you selected the Program option under Caption Vision, you can change the following settings:
Option
Description
Basic
Allows you to select basic analog (EIA-608) closed caption options.
CC1, CC2,
CC3, CC4
Text1, Text2,
Text3, Text4
Digital CC
Advanced
Allows you to set digital closed captioning to Basic (digital EIA-608) or Advanced (digital
EIA-708).
Allows you to select advanced digital (EIA-708) closed caption options. Select from the
available options.
(Continued)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing MENU Function
Option
Description
Advanced Settings
Allows you to make additional settings for digital (EIA-708) closed caption options. Select
from As Broadcast, Small Text, Large Text and Custom.
Custom...
Allows you to customize the following settings:
Character Size
Character Style
Character Color
Character Opacity
Edge Color
Small, Standard, Large
Style 1-7
Color 1-8
Solid, Translucent
Color 1-8
Edge Type
None, Raised, Depressed, Outline,
Left Shadow, Right Shadow
Background Color
Background Opacity
Window Color
None, Color 1-8
Solid, Translucent
None, Color 1-8
Solid, Translucent
Window Opacity
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
Problem
Possible Remedies
No picture.
No picture.
❑
Cannot receive any channels.
❑
❑
❑
Make sure the power cord is connected securely.
Turn on the power of the TV.
Check antenna/cable connections.
TV is locked to one channel.
❑
Perform Auto Program to add receivable channels that are not presently in the
Cannot receive or select channels. ❑ Perform Auto Program to add receivable channels that are not presently in the
❑
To receive or select cable channels, make sure that Cable in the Setup settings
sure Cable is set to Off.
The TV turns off automatically.
❑
❑
Check if the Sleep Timer is activated, or confirm the Duration setting of Timer.
(page 30).
No picture from some video
sources.
❑
❑
❑
Check the connection between the optional video equipment and the TV.
If you connect video equipment to the S VIDEO input of the TV, set Auto YC to
❑
Press MENU on the remote control. Select your desired input from the External
Inputs list.
Poor picture.
Double images or ghosts.
❑
❑
Check antenna/cable connections.
Check the antenna location and direction.
Only snow and noise appear on the ❑ Check if the antenna is broken or bent.
screen.
❑
Check if the antenna has reached the end of its serviceable life. (3-5 years in
normal use, 1-2 years at the seaside.)
Dotted lines or stripes.
❑
Keep the TV away from noise sources such as cars, motorcycles, or hair-dryers.
correct/The picture is too bright.
❑
❑
If you set the Power Saving mode to Low or High, it will enhance the black
level.
Noisy picture.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial
cable.
❑
❑
Keep the antenna cable away from other connecting cords.
To avoid TV interference, make sure to use an undamaged antenna cable.
No sound/Noisy sound
Good picture, no sound.
❑
❑
Check the volume control.
Press MUTING or VOL + so that “Muting” disappears from the screen
(page 19).
❑
❑
Disconnect your headphones.
not output from the TV’s speakers regardless of the TV’s volume control.
(Continued)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Problem
Possible Remedies
Audio noise.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial
cable.
❑
❑
Keep the antenna cable away from other connecting cords.
To avoid TV interference, make sure to use an undamaged antenna cable.
Wide Mode changes automatically.
“Black box” on screen.
❑
The current Wide Mode setting is automatically replaced with the 4:3 Default
setting when you change the channel or video input, if 4:3 Default in the Screen
settings is set to other than Off. If you want to lock in the Wide Mode selected
You have selected a text option in the Setup/Digital Setup setting and no text is
set the Caption Vision option to Off. If you were trying to select closed
captioning, select CC1 instead of Text1-4.
❑
❑
Black bands appear at the top and
bottom of the screen.
❑
❑
Some wide-screen programs are filmed in aspect ratios that are greater than 16:9
(this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of the screen. For more details,
check the documentation that came with your DVD (or contact your program
provider).
Certain programs on DVD or other
digital sources display a loss of
detail, especially during fast-motion
or dark scenes.
The compression used by certain digital broadcasts and DVDs may cause your
TV’s screen to display less detail than usual, or cause artifacts (small blocks or
dots, pixelations) to appear on your screen. This is due to your TV’s large screen
and ability to show very fine detail, and is normal for certain digitally recorded
programs.
Remote control does not operate.
❑
❑
❑
Check the polarity of the batteries or replace the batteries.
Point the remote control at the remote control sensor of the TV.
Florescent lamps can interfere with your remote control operation; try turning
off the florescent lamps.
❑
❑
Keep the remote control sensor area clear from obstacles.
Some digital cable channels are not
being displayed.
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
The digital cable channel may be set to Hidden in the Show/Hide Channels
❑
❑
Lost password.
Select the Parental Lock settings on the settings screen, then enter the following
master password: 4357. The master password clears your previous password and
How to reset the TV to factory
settings.
❑
Turn on the TV. While holding down the V button on the remote control, press
the POWER button on the TV. (The TV will turn itself off, then back on again.)
Release the V button.
WARNING: The Reset will clear all of your customized settings including
Parental Lock setting.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
PC Input Signal Reference Chart
Resolution
Horizontal frequency
(kHz)
Vertical
frequency (Hz)
Standard
Signals
Horizontal
(Pixel)
×
Vertical
(Line)
VGA
640
640
×
480
480
400
600
600
768
768
768
768
768
768
31.5
37.5
31.5
37.9
46.9
48.4
56.5
60.0
47.4
47.8
47.7
60
75
70
60
75
60
70
75
60
60
60
VGA
VESA
×
×
×
×
×
×
×
×
×
×
720
VGA-T
SVGA
XGA
800
VESA Guidelines
VESA
800
1024
1024
1024
1280
1280
1360
VESA Guidelines
VESA
VESA
WXGA
VESA
VESA
VESA
This TV's PC Input does not support Sync on Green or Composite Sync.
This TV's PC Input does not support interlaced signals.
This TV's PC Input supports signals in the above chart with a 60Hz vertical frequency.
For the best picture quality, it is recommended to use signals with a 60Hz vertical frequency from a
personal computer. In plug and play, signals with 60Hz vertical frequency will be selected
automatically.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Speaker:
Specifications
11
Full range: KDL-26S2000: 42 × 150 mm (1 /16 × 6 inches) (2)
11
Television system:
KDL-32S2000: 42 × 150 mm (1 /16 × 6 inches) (2)
1
NTSC
American TV Standard
KDL-40S2000: 55 × 150 mm (2 /4 × 6 inches) (2)
ATSC (8VSB terrestrial) ATSC compliant 8VSB
Speaker output:
10 W + 10 W
QAM on cable
ANSI/SCTE 07 2000
(Does not include CableCARD
functionality)
Power requirement:
120 V-240 V AC, 50/60 Hz
Channel coverage:
Terrestrial (analog)
Cable TV (analog)
Terrestrial (digital)
Cable TV (digital)
2-69
1-125
2-69
Power consumption:
In use: KDL-26S2000: 120W
KDL-32S2000: 150W
KDL-40S2000: 200W
In standby: Less than 0.1 W
1-135
Antenna:
75-ohm external terminal for VHF/UHF
Dimensions (W/H/D):
KDL-26S2000: (with stand) 658 × 516 × 219 mm
Screen size (measured diagonally):
KDL-26S2000: 26 inches
KDL-32S2000: 32 inches
3
5
(26 × 20 /8 × 8 /8 inches)
(without stand) 658 × 470 × 94 mm
5
3
KDL-40S2000: 40 inches
(26 × 18 /8 × 3 /4 inches)
Panel System:
LCD (Liquid Crystal Display) Panel
KDL-32S2000: (with stand) 792 × 593 × 219 mm
1
3
5
(31 /4 × 23 /8 × 8 /8 inches)
(without stand) 792 × 546 × 99 mm
Display resolution (horizontal × vertical):
1,366 dots × 768 lines
VIDEO IN 1/2/3:
S VIDEO (4-pin mini DIN) (VIDEO 1/2 only):
1
1
(31 /4 × 21 /2 × 4 inches)
KDL-40S2000: (with stand) 988 × 716 × 334 mm
1
1
(39 × 28 /4 × 13 /4 inches)
(without stand) 988 × 664 × 103 mm
1
1
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
(39 × 26 /4 × 4 /8 inches)
C: 0.286 Vp-p (Burst signal), 75 ohms
1 Vp-p, 75 ohms unbalanced, sync negative
500 mVrms (100% modulation)
Impedance: 47 kilohms
Mass:
VIDEO:
AUDIO:
KDL-26S2000: (with stand) 13 kg (28 lb. 10 oz.)
(without stand) 11 kg (24 lb. 4 oz.)
KDL-32S2000: (with stand) 17 kg (37 lb. 7 oz.)
(without stand) 15 kg (33 lb.)
KDL-40S2000: (with stand) 27 kg (59 lb. 8 oz.)
(without stand) 21 kg (46 lb. 3 oz.)
HD/DVD IN 4/5:
YP P (Component Video):
B
R
Y: 1.0 Vp-p, 75 ohms unbalanced,
sync negative
PB: 0.7 Vp-p, 75 ohms
Supplied accessories:
Remote control RM-YD005 (1)
Size AA batteries (2)
75-ohm coaxial cable (1)
PR: 0.7 Vp-p, 75 ohms
Signal format: 480i, 480p, 720p, 1080i
500 mVrms (100% modulation)
Impedance: 47 kilohms
AUDIO:
AC power cord (1)
HD15-HD15 cable (1)
Support belt (1), securing screw (1) and wood screw (1)
Cable holder (1)
Operating Instructions (1)
Quick Setup Guide (1)
Leaflet (Installing the Wall-Mount Bracket) (1)
Warranty Card (1)
Online Registration Card (U.S.A. only) (1)
HDMI IN 6:
HDMI:
Video: 480i, 480p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits
500 mVrms (100% modulation)
Impedance: 47 kilohms
AUDIO:
AUDIO OUT:
500 mVrms (100% modulation)
More than 1 Vrms at the maximum volume setting (Variable)
More than 500 mVrms (Fixed)
Optional accessories:
Headphones plug adapter
Connecting cables
Wall-Mount Bracket: SU-WL31 (KDL-26S2000/KDL-32S2000)
SU-WL51 (KDL-40S2000)
PC IN 7:
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference Chart on page 41
Optional accessories’ availability depends on
its stock.
PC AUDIO INPUT:
Stereo mini jack, 0.5 Vrms, 1 kilohm
Headphones:
Stereo mini jack
Impedance: 16 ohms
Design and specifications are subject to change
without notice.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
4:3 Default 27
Setting up channels 17
Settings
Hue 24
A
Analog Setup 35
Digital Setup 36
PC 34
I
A/V Sync 37
AC IN 14
Info Banner 29
Picture 24
Advanced Settings 25
Alternate Audio 19
Audio Out 31
Information 31
Screen 27
Infrared Receiver (IR) 21
Setup 29
Sound 26
J, K
AUDIO OUT jack, described 14
Auto Adjustment 34
Auto SAP, MTS setting 26
Auto Wide 27
Sharpness 24
SLEEP button 18
Sound Mode 26
Speaker 31
JUMP button 20
L
Label Video Inputs 30
Language 29
Auto YC 30
STANDBY LED 21
Steady Sound 26
Stereo, MTS setting 26
Support Belt 15
Surround 26
B
Light Sensor
Backlight 24
Balance 26
Bass 26
Described 21
Setting 31
Swivel 16
BBE 26
M
Bilingual audio 26
Brightness 24
MENU
T, U
Analog 23
TIMER LED 21
Analog Favorites 23
Digital 23
C
Timer Settings 30
TOOLS button 20
Treble 26
Cable
Digital Favorites 23
External Inputs 22
Settings 23
with VCR, connecting 12
Channels
TruSurround XT 26
Turning on/off the TV 21
TV Rating 32
Mono, MTS setting 26
Movie Rating 32
MTS 26
Setting up 17
TV/VIDEO button 18
Unrated 32
Closed caption modes 29
Color 24
MUTING button 19
US Models 32
Color Temperature 24
Current Time 31
N
Noise Reduction 25
V
VCR
D
O
With cable, connecting 12
Vertical Size 28
Diagnostics 37
OPTICAL OUT 14
Digital Channels 36
Digital Setup 37
P, Q
VHF/UHF input, described 14
VIDEO/AUDIO (L/R) jacks, described
DIGITAL/ANALOG button 19
Display Area 27
PC IN 13
DISPLAY button 20
Dynamic, Sound Mode 26
Phase 34
Viewing Blocked Programs 33
PIC OFF LED 21
Picture 24
E
PICTURE button 18
Picture Mode 24
Pitch 34
W, X, Y
English Rating 32
WIDE button 20
ENT button 20
POWER LED 21
Power Management 34
Power Saving 31
Program Options 19
Quiet Power On 31
F
FREEZE button 18
French Rating 33
G
GUIDE button 18
R
H
HD/DVD IN jack (1080i/720p/480p/
480i), described 14
RETURN button 19
S
HDMI IN jack, described 14
Headphones jack, described 13
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed on 100% recycled paper.
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|