4-157-878-12(1)
Digital HD Video
Camera Recorder
HXR-NX5E/NX5P/NX5M
Operating Guide
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
© 2009 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
Do not expose your camcorder’s
viewfinder, lens, or LCD screen to the
sun or strong light source for extended
periods.
• The camcorder is not dustproof, dripproof or
waterproof.
• Connect cables to your camcorder with their
terminals placed the correct way. Squeezing the
terminals into your camcorder's jacks may
damage them or results in a malfunction of your
camcorder.
• HXR-NX5E/NX5P: Even if the camcorder is
turned off, the GPS function is working as long
as the GPS switch is set to ON. Make sure that
the GPS switch is set to OFF during take off and
landing of an airplane.
• Intense light sources, especially the sun
will converge on the viewfinder or lens
and damage the internal parts of your
camcorder. Avoid sunlight or other strong
light sources when storing your
camcorder. Protect this device by always
closing the lens cover or by placing it in
its bag when not in use.
About temperature of your camcorder
and battery pack
• Your camcorder has a protective function
that disables recording or playback if the
temperature of your camcorder or battery
pack is beyond the safely operable range.
In this case, a message appears on the
About menu items, LCD panel,
viewfinder, and lens
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
• The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
the pixels are operational for effective
use. However, there may be some tiny
black points and/or bright points (white,
red, blue, or green in color) that appear
constantly on the LCD screen and/or the
viewfinder. These points are normal
results of the manufacturing process and
do not affect the recording in any way.
On recording
• In order to stabilize memory card
operation, it is recommended that you
format the memory card when you use it
with your camcorder for the first time. All
data recorded on the memory card will be
erased by formatting, and can not be
recovered. Save important data on the
memory card on other media such as a
computer, before formatting the memory
card.
• Before starting to record, test the
recording function to make sure the
picture and sound are recorded without
any problems.
• Compensation for the loss of the content
of recordings or the loss of recording
opportunities cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder, storage
media, etc., or even if images or sounds
are distorted due to the limits of the
capabilities of the camcorder.
Black point
White, red, blue or green point
• TV color systems differ depending on the
countries/regions. To view your
Continued ,
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first (Continued)
recordings on a TV, you need a PAL
system-based TV.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
• Because of the way that the image device
(CMOS sensor) reads out image signals,
the following phenomena may occur.
– The subjects passing by the frame rapidly
might appear crooked depending on the
recording conditions. (This phenomenon may
be notable in displays having high motion
resolution.)
– Horizontal lines appear on the screen during
recording under fluorescent lights. The
phenomena can be reduced by adjusting the
– Images on the screen look horizontally
divided when a subject is lighted with a flash.
The phenomena can be reduced by using a
slower shutter speed.
containing AVCHD footage should not be
used with DVD based players or recorders,
as the DVD player/recorder may fail to
eject the media and may erase its contents
without warning.
Save all your recorded image data
To prevent your image data from being lost,
save all your recorded images on external
media periodically. It is recommended that
you save the image data on a computer
using the supplied application software.
Format the recording media using
[MEDIA FORMAT] if images are not
recorded or played back properly
If you continue recording and deleting
images on recording media for a long time,
the files on that recording media may be
fragmented. As a result, you may not be
able to record and save images properly. If
this happens, save images on a separate
recordable media, such as a disc or
computer, then format the recording media
On playing back movies
• Your camcorder is compatible with
MPEG-4 AVC/H.264 High Profile for
high definition image quality (HD)
recording. Therefore, you cannot play
back images recorded with high definition
image quality (HD) on your camcorder
with the following devices;
– Other AVCHD format compatible devices
which are not compatible with High Profile
– Devices which are not compatible with the
AVCHD format
Note on disposal/transfer
Even if you delete all data or format the
recording media on your camcorder or
computer, you may not delete data from the
recording media completely. When you
transfer the recording media or your
camcorder, it is recommended that you
delete the data completely using
commercially available data deletion
software to prevent the recovery of your
data. Also, when you dispose of the
recording media, it is recommended that
you destroy the actual body of the recording
media.
• Movies made using this camcorder may
not play back normally on devices other
than this camcorder. Also, movies
recorded on other devices may not play
back properly on this camcorder.
• Standard (SD) image quality movies
recorded on SD memory cards cannot be
played on AV equipment of other
manufacturers.
About the operation of the camcorder
You can operate the camcorder using the
touch panel. However, you cannot use the
touch panel to make some settings such as
the MENU items.
Discs recorded with high definition
image quality (HD)
This camcorder captures high definition
footage in the AVCHD format. DVD media
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About this manual
• Memory cards and a flash memory unit
are both referred to as recording media in
this manual.
• The images of the LCD screen and the
viewfinder used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may
appear different.
• The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
• Design and specifications of recording
media and other accessories are subject to
change without notice.
• Illustrations of camcorders in this manual
show the HXR-NX5E unless otherwise
specified.
• Illustrations of battery packs in this
manual show the NP-F770 unless
otherwise specified.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Read this first ........................................................................................... 2
Step 2: Attaching the supplied microphone and the lens hood with lens
Selecting high definition image quality (HD) or standard definition
image quality (SD)............................................................................... 24
Playback ................................................................................................ 47
Viewing still images............................................................................. 49
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings to adjust your camcorder to the recording conditions (GAIN SET/
Display settings of the display and the viewfinder (MARKER/VF BACKLIGHT/
Continued ,
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents (Continued)
Troubleshooting ..................................................................................... 90
Specifications ....................................................................................... 112
Screen indicators ................................................................................. 122
Index .................................................................................................... 124
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GSetttiengpSta1rte:d Checking supplied items
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
106 for types of memory cards that you can use
on your camcorder.
AC Adaptor/Charger (AC-VL1) (1) (p. 12)
Rechargeable battery pack (NP-F570) (1)
Lens hood with lens cover (1) (p. 10)
This lens hood is pre-mounted.
Power cord (mains lead) (1) (p. 12)
Wireless Remote Commander (RMT-845)
Wind Screen (1), Microphone (ECM-XM1)
A button-type lithium battery is already installed.
Component video cable (1) (p. 54)
Accessory shoe kit (Accessory shoe (1),
Accessory shoe plate (1), screws (4))
A/V connecting cable (1) (p. 54)
USB cable (1) (p. 88)
Connecting cord (DK-415) (1) (p. 13)
CD-ROM “Content Management Utility” (1)
CD-ROM “Manuals for Digital HD Video
Camera Recorder” (1)
Operating Guide (2)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Attaching the supplied microphone and
the lens hood with lens cover
Attaching the supplied
microphone
4
Put the microphone cable into the
cable holder E.
When you use the supplied microphone
(ECM-XM1) for recording sound, do the
following steps.
Hook the cable in the outer cable holder.
Attaching the lens hood with lens
cover
1
2
Attach the wind screen B to the
supplied microphone A.
Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
PUSH (lens hood release) button
Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow 2 until it is locked.
3
Connect the plug of the
microphone to the INPUT1 jack
D.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the lens hood with lens
cover
Turn the lens hood in the opposite direction
to the arrow 2 in the illustration while
pressing the PUSH (lens hood release)
button.
z Tips
• If you attach or remove a 72mm (2 7/8 in.) PL
filter or MC protector, remove the lens hood
with lens cover.
To open or close the shutter of the
lens hood with lens cover
Move the lens cover lever to OPEN to open
the lens cover, and move the lever to
CLOSE to close the lens cover.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Charging the battery pack
After charging the battery
You can charge the “InfoLITHIUM”
battery pack (L series) with the
supplied AC Adaptor/Charger.
The charge lamp turns off (normal charge).
If you continue charging more 1 hour after
the charge lamp turns off, you can use the
battery a little longer (full charge).
Remove the battery pack from the AC
Adaptor/Charger when the charge is
completed.
b Notes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
To attach the battery pack
Press the battery pack against the back of
your camcorder and slide it down.
Charge lamp
z Tips
1
2
Set the mode switch to CHARGE.
• You can check the remaining battery life with
To remove the battery pack
Slide the POWER switch to OFF. Push the
BATT RELEASE (battery release) button
and remove the battery pack.
Connect the power cord (mains
lead) to the AC Adaptor/Charger.
3
4
Connect the power cord (mains
lead) to the wall outlet (wall
socket).
Place the battery pack in the slot
of the AC Adaptor/Charger, press
it down, and slide it in the
direction of the arrow as
illustrated.
BATT RELEASE
(battery release) button
The charge lamp turns on and charging
starts.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To store the battery pack
Using an outside power source
If the battery pack is not in use for a while,
run down the battery and store it. See page
108 for details on storage of the battery
pack.
You can use the AC Adaptor/Charger to
obtain AC power.
To the wall outlet
(wall socket)
Power cord
Charging time
Approximate time (min.) required when
you charge a fully discharged battery pack.
AC Adaptor/
Charger
Charge
lamp
Normal charge
time
Fully charge
time
Battery pack
NP-F570
NP-F770
NP-F970
140
250
365
200
310
425
Mode
switch
b Notes
• The supplied battery pack is NP-F570.
• You cannot use the NP-F330 battery pack with
your camcorder.
Connecting
cord
DK-415
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF.
1 Connect the power cord (mains lead) to
the AC Adaptor/Charger.
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
2 Connect the power cord (mains lead) to
the wall outlet (wall socket).
3 Connect the connecting cord (DK-415)
to the AC Adaptor/Charger.
– The battery pack is worn-out.
4 Set the mode switch of the AC Adaptor/
Charger to VCR/CAMERA.
5 Press the connecting part of the
connecting cord (DK-415) against the
back of your camcorder in the battery
slot and slide it down.
On the AC Adaptor/Charger
• Use the nearby wall outlet when using the AC
Adaptor/Charger. Disconnect the AC Adaptor/
Charger from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor/Charger placed in a
narrow space, such as between a wall and
furniture.
• Do not short-circuit the DC plug of the AC
Adaptor/Charger or battery terminal with any
metallic objects. This may cause a malfunction.
Continued ,
13
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
Step 4: Turning the
power on and holding
your camcorder
properly
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor/Charger.
To record or play back, set the POWER
switch to ON.
When you use your camcorder for the first
time, the [CLOCK SET] screen appears
POWER switch
1
Slide the POWER switch to ON
while you press the green button.
Press and hold the
green button.
b Notes
• The current date and time appear on the LCD
screen for a few seconds when you turn on your
camcorder after you set the date and time with
[CLOCK SET], p. 17.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Adjusting the
LCD panel and
viewfinder
2
3
Hold the camcorder properly.
LCD panel
Open the LCD panel 180 degrees (1), then
rotate it to the best angle to record or play
back (2).
1Open 180 degrees.
290 degrees
(max.)
2180 degrees
(max.)
Ensure a good grip, then fasten
the grip belt.
DISPLAY button
z Tips
• Images are displayed as mirror images on the
LCD screen, but are recorded as normal images.
To turn off the LCD backlight to make
the battery last longer
To turn off the power
Slide the POWER switch to OFF.
Press and hold the DISPLAY button for a
few seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
picture will not be affected by the setting.
To turn on the LCD backlight, press and
hold the DISPLAY button for a few
b Notes
• If warning messages appear on the screen,
follow the instructions.
seconds until
disappears.
Also, you can turn on the LCD backlight by
turning on/off the camcorder.
z Tips
• You can adjust the brightness of the LCD screen
Continued ,
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Adjusting the LCD panel and viewfinder (Continued)
Viewfinder
Large eyecup
(supplied)
Viewfinder lens
adjustment lever
Move it until the picture
becomes clear.
Attach with the
protruding part
at the top.
b Notes
• You may see primary colors shimmering in the
viewfinder when you move your line of sight.
This is not a malfunction. The shimmering
colors will not be recorded on the recording
media.
z Tips
• You can adjust the brightness of the viewfinder
• To display images both on the LCD display and
in the viewfinder, set [VF POWERMODE] to
• To display images in black and white in the
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and align it with the eyecup
groove in the viewfinder. You can attach
the large eyecup facing either the right or
left side.
b Notes
• Do not remove the pre-attached eyecup.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Setting the date and time
Set the date and time when using your
camcorder for the first time. If you do not
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder.
2
3
4
5
Select
(OTHERS) by turning
the SEL/PUSH EXEC dial, then
press the dial.
z Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
Select your area by turning the
SEL/PUSH EXEC dial, then press
the dial.
MENU
button
SEL/PUSH
EXEC dial
Skip to step 4 when you set the clock for
the first time.
1
Press the MENU button.
Set [SUMMERTIME], [Y] (year),
[M] (month), [D] (day), hour and
minute, by turning the SEL/PUSH
EXEC dial, then press the dial.
Continued ,
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Setting the date and time (Continued)
The clock starts.
• Set [SUMMERTIME] to [ON] to move the
time forward 1 hour.
• You can set any year up to the year 2037.
z Tips
• The date and time are automatically recorded on
the selected recording media, and can be
displayed during playback (DATA CODE
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
Press the MENU button and select
(OTHERS) with the SEL/PUSH EXEC
dial. Select the screen language in
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7: Inserting a memory card/Attaching a
flash memory unit
• When you insert a new memory card in
standby mode, the [Create a new Image
Database File.] screen appears. Follow the
screen indication, and touch [YES].
Memory card
1
Open the cover in the direction of
the arrow.
To eject the memory card
Lightly push the memory card once.
b Notes
• When the access lamp is lit or flashing in red,
your camcorder is reading/writing data. Do not
shake or knock your camcorder, turn the power
off, eject the memory card, or remove the
battery pack. Otherwise, image data may be
damaged.
• If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] appears in step 2, format the memory
• When inserting or ejecting the memory card, be
careful to prevent the memory card from
popping out and dropping.
2
Orient the memory card’s
notched corner as shown in the
illustration, and insert into the
memory card slot until it clicks.
Memory card slot A and its
access lamp
Selecting the memory card slot to be
used for recording
Press the A or B button of the memory card
slot where the memory card you want to
record on is inserted. The lamp of the
selected slot lights up in green.
Memory card slot B and its
access lamp
Insert with the notched corner
first, and facing down.
b Notes
Memory card slot A button
Memory card slot B button
• If you insert a memory card into the slot in
the wrong direction, the memory card, the
memory card slot, or image data may be
damaged.
Continued ,
19
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
b Notes
• You can only select a slot that already has a
memory card inserted.
• While movies are being recorded on the
memory card, you cannot switch the slot even if
you press the memory card slot A/B buttons.
z Tips
• When only one slot has a memory card inserted,
the slot that has the memory card is selected
automatically.
• If the memory card is fully recorded during
recording, the camcorder continues recording
automatically on the memory card inserted in
Flash memory unit
You can attach a flash memory unit HXR-
FMU128 (sold separately) to your
camcorder for recording movies.
3
When [EXT media has been
attached. It is necessary to
reboot. Execute?] appears on the
screen, touch [YES].
1
While sliding the RELEASE lever
in the direction of the arrow,
remove the flash memory unit
jack cover.
b Notes
• If you touch [NO] in step 3, turn on your
camcorder again. You will be able to record in
the flash memory unit.
To remove the flash memory unit
Turn off your camcorder, and while sliding the
RELEASE lever in the direction of arrow, remove
the flash memory unit.
When you do not use an flash memory unit, leave
the flash memory unit jack cover attached.
2
Align the mark on the camcorder
and that on the flash memory
unit, and slide the flash memory
unit in the direction of the arrow.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording/Playback
Recording
Recording lamp
Handle record button
Recording lamp
Lens hood
POWER switch
Record button
Your camcorder records movies on memory cards or a flash memory unit. Do the following
steps to record movies.
• This camcorder can record movies in either high definition image quality (HD) or standard definition
image quality (SD). The factory setting is high definition image quality (HD) ([
/
SET], p. 24).
b Notes
• When the access lamp is lit or flashing in red, your camcorder is writing data on recording media. Do not
shake or knock your camcorder, or remove the battery pack or the AC Adaptor/Charger.
• Your camcorder can record movies for about 13 hours continuously.
• If a movie file exceeds 2 GB during recording, the camcorder divides the file and create a new file
automatically.
• The menu settings, the PICTURE PROFILE settings, and the settings made by the AUTO/MANUAL
switch are stored in your camcorder when you turn the POWER switch to OFF. The access lamp lights up
while the settings are being stored. If you remove the battery pack or the AC Adaptor/Charger before
turning off the power, the settings may return to the default settings.
1
Open the shutter of the lens hood.
Continued ,
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (Continued)
2
3
Slide the POWER switch to ON while pressing the green button.
Press and hold the green
button.
Press the record button or the handle record button.
[STBY] t [REC]
The recording lamp lights up during recording.
To stop the movie recording, press the record button or the handle record button again.
z Tips
• When recording in high definition image quality (HD), the aspect ratio is fixed to 16:9. When recording in
standard definition image quality (SD), you can switch the aspect ratio to 4:3 ([
• Indicators displayed on the screen during recording are shown on page 122.
• For low angle recording, the handle record button is convenient. Release the HOLD lever to enable the
handle record button. It might be helpful if you set the LCD panel face up or close it after turning it face
down, or lift the viewfinder up during the low angle recording.
• You can capture still images from the movies you recorded (p. 60).
To continue recording on the memory cards, one after another (Relay recording)
Insert memory cards each in both slots A and B, so the camcorder switches memory card A (or
B) just before space on the other one runs out, and continues recording on the next memory
card automatically.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert a recordable memory card.
Small space
End
Start
REC: Recording
Small space
b Notes
• Do not eject the memory card that is currently being used for recording. Replace only the memory card
whose slot lamp is off.
• Even if you press the memory card slot button, A or B, while recording movies, you cannot switch the slot
currently being used.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has recordable memory card inserted, [
] or [
] appears on the camcorder screen. The
indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without fail, make sure that the memory card
has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can re-combine relay-recorded movies using the supplied application software (Windows only).
To record movies using both the memory card and the flash memory unit
(Simultaneous recording)
You can record movies on both of these recording media simultaneously.
You can change the recording media using the record button and the handle record button with
b Notes
• You cannot record on the memory cards in slots A and B simultaneously.
z Tips
• Relay recording works during simultaneous recording on different media.
• If one of the recording media used becomes unable to continue recording during simultaneous recording,
the other recording media continues recording without pause.
Changing the setting of the record button/handle record button
You can start and stop recording on different recording media at different timing by operating
the record button and the handle record button.
In the default setting, movies are recorded on both the memory card and the flash memory unit
at the same time when either record button is pressed.
Continued ,
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (Continued)
• REC BUTTON:[
][
]
• HANDLE REC BUTTON:[
][
]
To change the setting
Press MENU t select
the SEL/PUSH EXEC dial.
(REC/OUT SET) t [REC SET] t [REC BUTTON SET] with
[REC BUTTON SET] setting
Button and recording media
REC BUTTON:[
HANDLE REC
][
]
Recording on both the memory card and the flash memory unit
starts and stops at the same time when either record button is
pressed.
BUTTON:[
][
]
REC BUTTON:[
HANDLE REC
BUTTON:[
]
Recording on the memory card starts and stops when the record
button is pressed, and on the flash memory unit when the handle
record button is pressed.
]
REC BUTTON:[
HANDLE REC
]
Recording on the flash memory unit starts and stops when the
record button is pressed, and on the memory card when the handle
record button is pressed.
BUTTON:[
]
Selecting high definition image quality (HD) or standard definition
image quality (SD)
You can set the recording image quality, high definition image quality (HD) or standard
definition image quality (SD), separately for the memory card and the flash memory unit.
To change the setting
Press MENU t select
SEL/PUSH EXEC dial.
(REC/OUT SET) t [REC SET] t [
/
SET] with the
To record in high definition image quality (HD)
Select [
:
:
] in [
/
SET].
Images are recorded in high definition image quality (HD) on the memory card and the flash
memory unit.
To record in standard definition image quality (SD)
To record in standard definition image quality (SD) on the memory card, select [
] in [ SET].
To record in standard definition image quality (SD) on the flash memory unit, select [
:
:
/
:
:
].
b Notes
• You cannot record in standard definition image quality (SD) on both the memory card and the flash
memory unit simultaneously.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the recording format
You can select the recording format (bit-rate, image size, frame rate, scanning system). In the
default setting, [
] is selected.
(REC/OUT SET) t [REC SET] t [REC FORMAT] with the
Description
To change the setting
Press MENU t select
SEL/PUSH EXEC dial.
Setting value
• Bit-rate
FX: max. 24 Mbps
FH: approx. 17 Mbps (average)
HQ: approx. 9 Mbps (average)
LP: approx. 5 Mbps (average)
• Image size
FX: 1920×1080/1280×720
FH: 1920×1080/1280×720
HQ: HD recording 1440×1080
SD recording 720×576
LP: 1440×1080
• Frame rate
either 25 or 50
• Scanning system
i: interlace
p: progressive
pSCAN: Records images of progressive scanning system as interlace
signal (50i).
Setting value
If you select [
], for example, movies are recorded with following format.
• HD: High definition image quality. SD is standard definition image quality.
• 1080: Effective scanning lines
• 50: Frame rate
• i: Scanning system
• FX: Recording mode
b Notes
• The recording mode is fixed to FX or FH with the progressive scanning system.
• When the recording format is changed to or from the 720/50p, you will be prompted to reboot the
camcorder. Select [YES]. Otherwise, you cannot switch the recording format.
z Tips
• When [
:
:
] in [
/
SET] is selected,
items are grayed out.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder
recordings
Adjusting the zoom
Using the handle zoom
1 Set the handle zoom switch B to VAR
or FIX.
z Tips
• When you set the handle zoom switch B to
VAR, you can zoom in or out at variable
speed.
• When you set the handle zoom switch B to
FIX, you can zoom in or out at fixed speed
2 Press the handle zoom lever A to zoom
in or out.
b Notes
• You cannot use the handle zoom lever A when
the handle zoom switch B is set to OFF.
• You cannot change the zoom speed of the power
zoom lever D with the handle zoom switch B.
Using the power zoom lever
Move the power zoom lever D slightly for
a slower zoom. Move it further for a faster
zoom.
Using the zoom ring
Wide view: (Wide angle)
You can zoom at the desired speed by
turning the zoom ring C. Fine adjustment
is also possible.
b Notes
• Turn the zoom ring C at a moderate speed. If
you turn it too fast, the zoom speed may lag
behind the zoom ring rotation speed, or the
operation sound of the zoom may also be
recorded.
Close view: (Telephoto)
z Tips
• The minimum distance required between your
camcorder and the subject for focus is about
1 cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80 cm (about
2 5/8 feet) from your camcorder.
• When you set [FOCUS MACRO] to [OFF], you
cannot focus on a subject within 80 cm (about 2
• Be sure to keep your finger on the power zoom
lever D. If you move your finger off the power
zoom lever D, the operation sound of the
power zoom lever D may also be recorded.
• You can increase the zoom speed of the power
zoom lever D or the handle zoom A ([SPEED
26
Download from Www.Somanuals.com. All Manuals Search And Download.
9 changes to
cannot be adjusted any farther. 9
changes to when the focus cannot be
adjusted any closer.
when the focus
Adjusting the focus manually
z Tips
For focusing manually
• It is easier to focus on the subject when you use
the zoom function. Move the power zoom lever
towards T (telephoto) to adjust the focus, and
then, towards W (wide angle) to adjust the zoom
for recording.
• When you want to record a close-up image of a
subject, move the power zoom lever towards W
(wide angle) to fully magnify the image, then
adjust the focus.
To restore automatic adjustment
Set the FOCUS switch B to AUTO.
9 disappears and the automatic focus
adjustment is restored.
You can adjust the focus manually for
different recording conditions.
Use this function in the following cases.
– To record a subject behind a window covered
with raindrops.
Using automatic focus temporarily
(Push auto focus)
Record the subject while pressing and
holding the PUSH AUTO button C.
If you release the button, the setting returns
to manual focusing.
Use this function to shift the focus on one
subject to another. The scenes will shift
smoothly.
– To record horizontal stripes.
– To record a subject with little contrast between
the subject and its background.
– When you want to focus on a subject in the
background.
z Tips
• The focal distance information (for when it is
dark and hard to adjust the focus) appears for
about 3 seconds in the following cases. (It will
not be displayed correctly if you are using a
conversion lens (sold separately)).
– To record a stationary subject using a tripod.
– When you set the FOCUS switch B to
MAN and 9 appears on the screen
– When you rotate the focus ring while 9 is
displayed on the screen.
1
2
During recording or standby, set
the FOCUS switch B to MAN.
9 appears.
Rotate the focus ring A and
adjust the focus.
Continued ,
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the image brightness
Using the expanded focus (Expanded
focus)
[EXPANDED FOCUS] is assigned to the
ASSIGN 7 button (p. 45).
Press the ASSIGN 7 button.
[EXPANDED FOCUS] appears and the
center of the screen is magnified by about
2.0 times. It will be easier to confirm the
focus setting during manual focusing. The
screen returns to the original size when you
press the button again.
b Notes
• Even though the image appears expanded on the
screen, the recorded image is not expanded.
z Tips
• You can select a type of an expanded image
displayed during the expanded focus
You can adjust the image brightness by
adjusting the iris, gain or shutter speed, or
by reducing the light volume with the ND
filter B.
Focusing on a distant subject (Focus
infinity)
Slide the FOCUS switch B to INFINITY
b Notes
and hold it there.
appears on the screen.
• You cannot use the back light function and the
spotlight function when iris, gain and shutter
speed are adjusted manually.
• [AE SHIFT] is not effective temporarily while
you adjust the iris, gain and shutter speed all
manually.
To return to manual focus mode, release the
FOCUS switch B. This function enables
you to set focus on a distant subject even
when the focus is automatically set on a
close subject.
Adjusting the iris
b Notes
• This function is only available during the
manual focus. It is not available during the
automatic focus.
You can manually adjust the iris to control
the volume of the light entering the lens. By
adjusting the iris, you can change or close
(
) the aperture of the lens, which is
expressed as an F value between F1.6 and
F11. The volume of the light increases the
more that you open the aperture (decreasing
F value). The volume of the light decreases
the more that you close the aperture
(increasing F value). The current F value
appears on the screen.
1 During recording or standby, set the
AUTO/MANUAL switch H to
MANUAL.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2 When the iris is automatically adjusted,
press the IRIS button E.
next to the gain value disappears, or
the gain value appears on the screen.
next to the iris value disappears, or
the iris value appears on the screen.
3 Set the gain switch F to H, M or L.
The gain value set for the selected gain
switch position appears on the screen.
You can set the gain value for each gain
switch position from [GAIN SET] of the
3 Adjust the iris with the iris ring A.
When you assign [PUSH AUTO IRIS]
to one of the ASSIGN buttons, you can
automatically adjust the iris while
pressing and holding that ASSIGN
ASSIGN button.
To adjust the gain automatically
Press the GAIN button C, or set the
AUTO/MANUAL switch H to AUTO.
z Tips
The gain value disappears, or
next to the gain value.
appears
• The F value becomes close to F3.4 as the zoom
position changes from W to T even when you
open the aperture by setting the F value lower
than F3.4, such as F1.6.
• The range of focus, an important effect of the
aperture, is called the depth of field. The depth
of field gets shallower as the aperture is opened,
and deeper as the aperture is closed. Use the
aperture creatively to obtain the desired effect in
your photography.
b Notes
• When you set AUTO/MANUAL switch H to
AUTO, other manually adjusted items (iris,
shutter speed, white balance) also become
automatic.
z Tips
• When you record high definition image quality
(HD) movies with the gain set to [-6dB] and
play them back with the data code, the gain
value is displayed as [---].
• This is handy for making the background
blurred or sharp.
To adjust the iris automatically
Press the IRIS button E, or set the AUTO/
MANUAL switch H to AUTO.
Adjusting the shutter speed
You can manually adjust and fix the shutter
speed. You can make a moving subject look
still or emphasize the movement of a
moving subject by adjusting the shutter
speed.
The iris value disappears, or
next to the iris value.
appears
b Notes
• When you set the AUTO/MANUAL switch H
to AUTO, other manually adjusted items (gain,
shutter speed, white balance) also become
automatic.
1 During recording or standby, set the
AUTO/MANUAL switch H to
MANUAL.
2 Press the SHUTTER SPEED button D
until the shutter speed value is
highlighted.
Adjusting the gain
You can adjust the gain manually when you
do not want to use the AGC (automatic gain
control).
3 Change the shutter speed displayed on
the screen by turning the SEL/PUSH
EXEC dial G.
1 During recording or standby, set the
AUTO/MANUAL switch H to
MANUAL.
You can adjust the shutter speed in a
range of 1/3 second through 1/10000
second.
2 When the gain is automatically
adjusted, press the GAIN button C.
The denominator of the set shutter speed
appears on the screen. For example,
Continued ,
29
Download from Www.Somanuals.com. All Manuals Search And Download.
[100] appears on the screen when you
set the shutter speed to 1/100 second.
The larger the value on the screen, the
faster the shutter speed.
The ND filter indicator will stop flashing
and remain on the screen.
If
flashes, set the ND filter to OFF.
The ND filter icon will disappear from the
screen.
4 Press the SEL/PUSH EXEC dial G to
lock the shutter speed.
b Notes
To readjust the shutter speed, do steps
2 to 4.
• If you change the ND filters B during
recording, the movie and sound may be
distorted.
• When adjusting the iris manually, the ND filter
icon does not flash even if the light volume
should be adjusted with the ND filter.
z Tips
• It is difficult to focus automatically at a lower
shutter speed. Manual focusing with your
camcorder attached to a tripod is recommended.
• When recording under fluorescent lamps,
sodium lamps, or mercury lamps, the picture
may flicker or change colors, or may have
horizontal bands of noise. You may be able to
improve the situation by adjusting the shutter
speed.
• If the camcorder cannot detect the ND filter
position (OFF/1/2/3),
flashes on the screen.
Make sure that the ND filter is set correctly.
z Tips
• While recording a bright subject, diffraction
may occur if you close the aperture further
down, resulting in a fuzzy focus (this is a
common phenomenon with video cameras). The
ND filter B suppresses this phenomenon and
gives better recording results.
To adjust the shutter speed
automatically
Press the SHUTTER SPEED button D
twice, or set the AUTO/MANUAL switch
H to AUTO.
Adjusting to natural color (White
balance)
The shutter speed value disappears, or
appears next to the shutter speed value.
b Notes
• When you set the AUTO/MANUAL switch H
to AUTO, other manually adjusted items (iris,
gain, white balance) also become automatic.
Adjusting the volume of light
(ND filter)
You can record the subject clearly by using
the ND filter B when the recording
environment is too bright.
The ND filters 1, 2 and 3 reduce the volume
of light to about 1/4, 1/16 and 1/64,
respectively.
If
flashes during the iris automatic
adjustment, set the ND filter to 1. If
flashes during the iris automatic
adjustment, set the ND filter to 2. If
flashes during the iris automatic
adjustment, set the ND filter to 3.
You can adjust and fix the white balance
according to the lighting conditions of
recording environment.
You can store white balance values in
30
Download from Www.Somanuals.com. All Manuals Search And Download.
memory A (
respectively. Unless a white balance is
readjusted, values will remain even after the
power has been turned off.
When you select PRESET, [OUTDOOR],
[INDOOR] or [MANU WB TEMP] is
selected, according to which one you
previously set with [WB PRESET] in the
(CAMERA SET) menu.
A) and memory B (
B),
Indicator
Shooting conditions
• Under the lighting
conditions that change
in many ways, such as
a party hall
• Under strong light,
such as in a
photography studio
• Under sodium lamps
or mercury lamps
n
Indoor
([INDOOR])
• Color temperature can
be set between 2300K
and 15000K (the
default setting is
6500K).
Color
temperature
([MANU WB
TEMP])
1
During recording or standby, set
the AUTO/MANUAL switch D to
MANUAL.
2
3
Press the WHT BAL button A.
z Tips
• You can change the outdoor white balance
setting by setting offset. Press (one push)
(outdoor) is selected and
turn the SEL/PUSH EXEC dial E to select an
offset value from -7 (bluish) to 0 (normal, the
default setting) to +7 (reddish). You can also set
the white balance offset value from the menu
Set the white balance memory
switch B to any one of
PRESET/A/B.
button C while
Select A or B for recording with the
white balance setting stored in memory
A or B.
• You can change the color temperature. Set [WB
PRESET] to [MANU WB TEMP], and the
white balance memory switch B to PRESET,
Indicator
Shooting conditions
then press the
(one push) button C. Turn
• White balance values
adjusted for light
sources can be stored
in memory A and
memory B. Follow the
steps in “To save the
adjusted white balance
A
the SEL/PUSH EXEC dial E until the desired
temperature appears on the screen, then press
the dial to set the temperature. You can also set
the color temperature from the menu ([WB
(Memory A)
B
(Memory B)
To save the adjusted white balance
value in memory A or B
• Recording neon signs
or fireworks
• Recording sunset/
sunrise, just after
sunset or just before
sunrise
1 Set the white balance memory switch to
Outdoor
([OUTDOOR])
A (
A) or B (
B) in step 3 of
“Adjusting to natural color (White
balance).”
2 Capture a white subject, such as white
paper, full-screen in the same lighting
condition as the one in which the subject
is.
• Under daylight color
fluorescent lamps
3 Press the
(one push) button C.
Continued ,
31
Download from Www.Somanuals.com. All Manuals Search And Download.
A or
B starts flashing rapidly. It
Customizing the picture quality
(Picture profile)
will stay on when the white balance
adjustment is completed and the
adjusted value is stored in
B.
A or
b Notes
• When a white balance adjustment value has not
been obtained successfully, A or
B
turns from rapid flashing to slow flashing.
Adjust the subject appropriately and set the
shutter speed to auto or around 1/50, then try
adjusting the white balance again.
• It may take a long time to adjust the white
balance, depending on the recording conditions.
If you want to perform a different operation
before completing the adjustment, set the white
balance memory switch B to another position
to temporarily suspend white balance
adjustment.
To adjust the white balance
automatically
Press the WHT BAL button A or set the
AUTO/MANUAL switch D to AUTO.
You can customize the picture quality by
adjusting picture profile items such as
[GAMMA] and [DETAIL].
Connect your camcorder to a TV or
monitor, and adjust the picture quality
while observing the picture on the TV or
monitor screen.
Picture quality settings for different
recording conditions have been stored in
[PP1] through [PP6] as default settings.
b Notes
• When you set the AUTO/MANUAL switch D
to AUTO, other manual adjusted items (iris,
gain, and shutter speed) also become automatic.
b Notes
• When you set [x.v.Color] in the
(CAMERA SET) menu to [ON], the picture
profile will be disabled.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the picture profile recording
Select [OFF] in step 2 with the SEL/PUSH
Picture profile
number
Recording condition
EXEC dial A.
PP1
PP2
PP3
Default settings the same
as when Picture Profile is
[OFF]
To change the picture profile
You can change the settings stored in [PP1]
through [PP6].
Default settings the same
as when Picture Profile is
[OFF]
1 Press the PICTURE PROFILE button
B.
Example settings of
pictures recorded by a
professional shoulder
camcorder with ITU-709
gamma
2 Select the PICTURE PROFILE number
with the SEL/PUSH EXEC dial A.
3 Select [SETTING] with the SEL/PUSH
EXEC dial A.
4 Select an item to be adjusted with the
PP4
Example settings of
pictures recorded by a
professional handy
camcorder with PD
gamma
SEL/PUSH EXEC dial A.
5 Adjust the picture quality with the SEL/
PUSH EXEC dial A.
6 Repeat steps 4 and 5 to adjust other
PP5
PP6
Example settings of
pictures recorded on
cinema color negative film
items.
7 Select [
RETURN] with the SEL/
PUSH EXEC dial A.
Example settings of
pictures screened with
cinema color print film
8 Select [OK] with the SEL/PUSH EXEC
dial A.
A picture profile indicator appears.
1
2
During standby, press the
PICTURE PROFILE button B.
Select a picture profile number
with the SEL/PUSH EXEC dial A.
You can record with the settings of the
selected picture profile.
3
Select [OK] with the SEL/PUSH
EXEC dial A.
Continued ,
33
Download from Www.Somanuals.com. All Manuals Search And Download.
BLACK LEVEL
To set the black level.
Item
Description and settings
[MASTER BLACK]
Sets the master black level.
-15 to +15
[BLACK R]
[BLACK G]
[BLACK B]
Sets the black level of Rch.
[MASTER BLACK] + [BLACK R] is the black level of Rch.
-15 to +15
Sets the black level of Gch.
[MASTER BLACK] + [BLACK G] is the black level of Gch.
-15 to +15
Sets the black level of Bch.
[MASTER BLACK] + [BLACK B] is the black level of Bch.
-15 to +15
GAMMA
To select a gamma curve.
Item
Description and settings
[STANDARD]
[CINEMATONE1]
[CINEMATONE2]
[ITU709]
Standard gamma curve
Gamma curve 1 for producing tone of film camera images
Gamma curve 2 for producing tone of film camera images
Gamma curve that corresponds to ITU-709. Gain in low intensity area:
4.5
[G5.0]
[PD]
Gamma curve with 5.0 of a low intensity area gain
Gamma curve for producing tone similar to DSR-PD series
Gamma curve similar to x.v.Color
[x.v.]
BLACK GAMMA
To correct gamma in low intensity area.
Item
Description and settings
[RANGE]
Selects a correcting range.
HIGH / MIDDLE / LOW
[LEVEL]
Sets the correcting level.
-7 (maximum black compression) to +7 (maximum black stretch)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
KNEE
To set knee point and slope for video signal compression to prevent over-exposure by limiting
signals in high intensity areas of the subject to the dynamic range of your camcorder.
Item
Description and settings
[MODE]
Selects a mode either automatic or manual.
[AUTO]
: to set the knee point and slope automatically.
[MANUAL] : to set the knee point and slope manually.
[AUTO SET]
Sets the maximum point and sensitivity in the automatic mode.
[MAX POINT]
: Sets the maximum point.
90% to 100%
[SENSITIVITY] : Sets the sensitivity.
HIGH/MIDDLE/LOW
[MANUAL SET]
Sets the knee point and slope manually.
[POINT]
: Sets the knee point.
75% to 105%
[SLOPE]
: Sets the knee slope.
-5(gentle) to +5(steep)
COLOR MODE
To set type and level of colors.
Item
Description and settings
Selects a type of colors.
[STANDARD] : Standard colors
[TYPE]
[CINEMATONE1] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE1]
[CINEMATONE2] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE2]
[ITU709 MATRIX]: Colors corresponding to ITU-709
[LEVEL]
Sets a color level when you set [TYPE] to the settings other than
[STANDARD].
1 (close to color settings of [STANDARD]) to 8 (color settings of the
selected type)
COLOR LEVEL
To set the color level.
Item
Description and settings
-7 (light) to +7 (dark), -8: black and white
COLOR PHASE
To set the color phase.
Item
Description and settings
-7 (greenish) to +7 (reddish)
Continued ,
35
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DEPTH
To set the color depth for each color phase.
This function is more effective for chromatic colors and less effective for achromatic colors.
The color looks deeper as you increase the setting value to more positive side, and lighter as
you decrease the value to more negative side. This function is effective even if you set
[COLOR LEVEL] to [-8] (black and white).
Item
[R]
[G]
[B]
[C]
[M]
[Y]
Description and settings
-7 (light red) to +7 (deep red)
-7 (light green) to +7 (deep green)
-7 (light blue) to +7 (deep blue)
-7 (light cyan) to +7 (deep cyan)
-7 (light magenta) to +7 (deep magenta)
-7 (light yellow) to +7 (deep yellow)
WB SHIFT
To set items for the white balance shift.
Item
Description and settings
Selects a color filter type for the white balance shift.
[FILTER TYPE]
[LB-CC]
[R-B]
: Film type (color conversion and correction)
: Video type (correction of R and B levels)
[LB[COLOR TEMP]] Sets a color temperature offset value.
-9 (bluish) to +9 (reddish)
[CC[MG/GR]]
Sets a color correct offset value.
-9 (greenish) to +9 (magentish)
[R GAIN]
Sets an R level.
-9 (low R level) to +9 (high R level)
[B GAIN]
Sets a B level.
-9 (low B level) to +9 (high B level)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DETAIL
To set items for the detail.
Item
Description and settings
[LEVEL]
Sets the detail level.
-7 to +7
[MANUAL SET]
[ON/OFF]
[ON]
: Turns on and off the manual detail adjustment.
: Enables the manual detail adjustment (automatic
optimization will not be performed).
[OFF]
: Disables the manual detail adjustment.
[V/H BALANCE] : Sets the vertical (V) and horizontal (H) balance of
DETAIL.
-2 (off to the vertical (V) side) to +2 (off to the
horizontal (H) side)
[B/W BALANCE]: Selects the balance of the lower DETAIL (B) and
the upper DETAIL (W).
TYPE 1 (off to the lower DETAIL (B) side) to
TYPE 5 (off to the upper DETAIL (W) side)
[BLACK LIMIT] : Sets the limit level of the lower DETAIL (B).
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[WHITE LIMIT] : Sets the limit level of the upper DETAIL (W).
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[CRISPENING] : Sets the crispening level.
0 (shallow crispening level) to 7 (deep crispening
level)
[HI-LIGHT DETAIL]:
Sets the DETAIL level in the high intensity areas.
-2 to +2
Continued ,
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SKINTONE DETAIL
To adjust the detail of skintone areas to reduce wrinkles.
Item
Description and settings
[ON/OFF]
Suppresses details in skin-tone areas to reduce wrinkles. Select [ON]
when you want to use this function. You can also select other areas.
[LEVEL]
Sets the adjustment level.
1 (less adjust the detail) to 8 (more adjust the detail)
[COLOR SEL]
Sets color items for the detail adjustment.
[PHASE]
: Sets the color phase.
0 (purple) t 32 (red) t 64 (yellow) t
96 (green) t 127 (blue)
: Sets the color range.
[RANGE]
0 (selects no color), 1 (narrow: selects a single
color) to 31 (wide: selects multiple colors in
similar color phases and saturation)
The detail will not be adjusted when you set
[RANGE] to 0.
[SATURATION] : Sets the color saturation.
0 (selects a light color) to 31 (selects a deep color)
[REVERSE]
: Reverses the selected color range.
If you execute this function when a color has been
selected, colors that have not been selected will be
selected instead.
[Y LEVEL]
[Y RANGE]
: Sets the color brightness.
0 (selects a dark color) to 31 (selects a bright
color)
: Sets the color brightness range.
1 (narrows the brightness range) to 32 (expands
the brightness range)
COPY
To copy the settings of the picture profile to another picture profile number.
RESET
To reset the picture profile to the default setting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
To copy the picture profile setting to
another picture profile number
Audio setup
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile number that
you want to copy from with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [COPY] with
SEL/PUSH EXEC dial A.
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
5 Select [YES] with the SEL/PUSH
EXEC dial A.
6 Select [ RETURN] t [OK] with the
SEL/PUSH EXEC dial A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1 Press the PICTURE PROFILE button
B.
2 Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
Channel setting
1 Select input sources with the CH1 (INT
MIC/INPUT1) switch C and the CH2
(INT MIC/INPUT1/INPUT2) switch
D.
3 Select [SETTING] t [RESET] t
[YES] t [
RETURN] t [OK]
with the SEL/PUSH EXEC dial A.
See the table below for the recording
channels.
Continued ,
39
Download from Www.Somanuals.com. All Manuals Search And Download.
When the CH1 switch is set to INT
MIC
LINE: For inputting sound from an
audio device
MIC: For inputting sound from an
external microphone that does
not support the +48V power
source.
MIC+48V:For inputting sound from a
device that supports the +48V
power source including the
supplied microphone.
CH2 switch
Input channel and source
position
INT MIC Internal
microphone
(L)
CH1
Internal
microphone
(R)
CH2*
When you connect a microphone to the
INPUT2 jack, set the INPUT2 switch to
an appropriate position for that
microphone.
INPUT1
INPUT2
Internal
microphone
(mono)
CH1
XLR INPUT1
CH2**
CH1
b Notes
Internal
microphone
(mono)
• Do not operate the INPUT1/INPUT2 switches
during recording to prevent noise from being
recorded.
XLR INPUT2
CH2**
• When you connect a device that supports the
+48V power source to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 switches to MIC
prior to connecting the device. When you
disconnect the device, set the INPUT1/INPUT2
switch to MIC first, then disconnect it.
When the CH1 is set to INPUT1
CH2 switch
Input channel and source
position
• When you connect a microphone that does not
support the +48V power source to the INPUT1
or INPUT2 jack, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
INPUT2 switch set to MIC+48V, it may be
damaged or the recorded sound may be
distorted.
INT MIC XLR INPUT1
CH1
Internal
microphone
(mono)
CH2**
INPUT1
INPUT2
XLR INPUT1
CH1
CH2**
Adjusting the volume
You can adjust the volume of an internal
microphone or a microphone connected to
the INPUT1/INPUT2 jacks.
XLR INPUT1
XLR INPUT2
CH1
CH2**
* The recording level of channel 2 is
synchronized with that of channel 1 when only
the internal microphone is used. The recording
level of channel 2 is controlled with the CH1
(AUDIO LEVEL) dial and the CH1 (AUTO/
MAN) switch.
z Tips
MIC/INPUT1) and the CH2 (INT MIC/
INPUT1/INPUT2) switches.
**You can adjust the recording levels of channel 1
and channel 2 separately.
1 Set the AUTO/MAN (CH1/CH2) switch
E of the channel to be adjusted to
MAN.
2 Set the INPUT1 switch B to an
appropriate position for the microphone
connected to the INPUT1 jack A.
appears on the screen.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Turn the AUDIO LEVEL dial F to
adjust the volume during recording or
standby.
triangulates successfully, it will record the
location information at the time movies
were recorded.
To restore automatic adjustment
Set the AUTO/MAN (CH1/CH2) switch E
of the manually adjusted channel to AUTO.
b Notes
• The indicator changes according to the strength
of GPS signal reception.
z Tips
• To check other audio settings, press the
STATUS CHECK button G.
• You can select [LINEAR PCM] or [DOLBY
DIGITAL] when recording in high definition
image quality (HD). (The default setting is
Tri-
angulating
status
GPS
GPS reception status
indicators
Function
off
No
The GPS switch is set
indicator to OFF, or the GPS
receiver is not
• For other settings, see the
(AUDIO SET)
functioning normally.
Difficult
The camcorder
cannot find a GPS
signal, therefore, it
cannot triangulate.
Use the camcorder in
an open area.
Setting the headphone sound
Searching
The camcorder is
searching the GPS
signal. It may take
several minutes until
the camcorder
You can select the channel, CH1 or CH2, to
output from the headphone.
triangulates.
See [HEADPHONE OUT] on the sound at
STEREO MIX (p. 78).
Tri-
angulating
The camcorder is
receiving a weak GPS
signal.
Tri-
angulating
The camcorder is
receiving a GPS
signal, and can
acquire location
information.
Acquiring location information
(HXR-NX5E/NX5P)
Tri-
angulating
The camcorder is
receiving a strong
GPS signal, and can
acquire location
information.
• The GPS switch is set to ON in the default
setting. Movies recorded during triangulation by
GPS will be recorded with location information.
If you do not want to record location
Set the GPS switch to ON.
appears, and your camcorder starts
trying to triangulate. When your camcorder
information, set the GPS switch to OFF.
Continued ,
41
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the GPS indicator does not become a
triangulating status indicator even after several
minutes, the camcorder is having trouble with
receiving GPS signals. You may start recording
if you do not need to record location
information, or go to a location with access to
the open sky.
A recording of the length selected as the
recording time is stretched by 4 times
and recorded as a slow-motion movie.
Recording ends when [Recording...]
disappears from the screen.
• The camcorder can hardly receive GPS signals
indoors or near tall buildings. Go to a location
with access to the open sky and turn on the GPS
switch again.
To cancel [SMOOTH SLOW REC], press
the MODE button.
• Even if the camcorder is turned off, the GPS
function is working as long as the GPS switch is
set to ON. Make sure that the GPS switch is set
to OFF during take off and landing of an
airplane.
To change the setting
Press the MENU button, and select the
setting to be changed.
• Even if a triangulating status indicator is
displayed, the camcorder may not record the
GPS information continuously, depending on
the condition of GPS signal reception.
x
REC MODE
You can select the record mode from [1080/
50i FX], [1080/50i FH], [1080/50i HQ], or
[1080/50i LP] for smooth slow recording.
x REC TIMING
Recording with the SMOOTH
SLOW REC function
You can use this to select when recording
starts in relation to when the record button
(handle record button) is pressed.
Fast moving subjects and actions, which
cannot be captured under the general
recording conditions, can be recorded in
smooth moving slow-motion.
This is useful for recording fast actions
such as a golf or tennis swing.
[START TRIGGER]*
1
2
Press the MODE button.
[END TRIGGER]
* The default setting is [START TRIGGER].
On the LCD screen, select
[CAMERA] t [SMOOTH SLOW
REC].
b Notes
• Sounds cannot be recorded.
• The shutter speed is automatically set to 1/215
second when you start [SMOOTH SLOW
REC]. (You cannot set a slower shutter speed
than 1/215 second.)
• The recording time may be shorter than the set
time, depending on recording conditions.
• The image quality is lower than with the regular
recording.
• The simultaneous recording on the memory card
and the flash memory unit is not available.
3
4
Select the recording media and
image quality t recording time.
You can select the recording time from
[3sec], [6sec] and [12sec].
Press the record button.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
• The longer the recording time, the poorer the
image quality.
• The camcorder does not perform relay recording
with the memory cards during [SMOOTH
SLOW REC]. If the space on the memory card
is insufficient, the camcorder records movies
only as long as there is space available.
• The time of the movie recorded using
[SMOOTH SLOW REC] is recorded after being
converted to slow-motion, not the time when the
movie is actually shot.
• Progressive recording is not available for
[SMOOTH SLOW REC]. The progressive
setting is changed to the interlace setting
automatically.
• [SMOOTH SLOW REC] is not available when
the recording format of high definition image
quality (HD) is set to 720/50p.
To reset the time code using the
Wireless Remote Commander
You can reset the time code (00:00:00:00)
also by pressing the TC RESET button on
the Wireless Remote Commander.
Presetting the user bit
1 Select [UB PRESET] with the SEL/
PUSH EXEC dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/
PUSH EXEC dial.
• Even if you change the record mode with
[
REC MODE], the record mode of the
4 Set other digits by repeating step 3.
standard definition image quality (SD) does not
change.
5 Select [OK] with the SEL/PUSH EXEC
dial.
Setting time data
To reset the user bit
The camcorder records movies
accompanied by time data, such as time
code and user bit.
You can reset the user bit (00 00 00 00).
Display the setting screen by pressing the
MENU button t select
(TC/UB SET)
with the SEL/PUSH EXEC dial.
Synchronizing the time code of this
camcorder with that of another
camcorder
Presetting the time code
You can synchronize the time code of this
camcorder with the time code of another
camcorder.
The camcorder that generates the time code
must be set to FREE RUN (the time code
advances regardlessly).
1 Select [TC PRESET] with the SEL/
PUSH EXEC dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/
PUSH EXEC dial.
1 Set [TC RUN] and [TC MAKE] in
(TC/UB SET) as follows:
• [TC MAKE]: [PRESET]
You can set the time code between
00:00:00:00 and 23:59:59:24.
4 Set other digits by repeating step 3.
• [TC RUN]: [FREE RUN]
5 Select [OK] with the SEL/PUSH EXEC
2 Set the TC LINK switch of this
camcorder to IN, and connect the TC
LINK IN/OUT jack and the TC OUT
jack of the other camcorder with a
cable.
dial.
To reset the time code
You can reset the time code (00:00:00:00).
Continued ,
43
Download from Www.Somanuals.com. All Manuals Search And Download.
This camcorder
The other
camcorder
Synchronizing the time code of
another camcorder with that of this
camcorder
You can synchronize the time code of
another camcorder with the time code of
this camcorder.
The camcorder that generates the time code
must be set to FREE RUN (the time code
advances regardlessly).
1 Set the time code of this camcorder with
[TC RUN] and [TC MAKE] in
(TC/UB SET).
2 Set the TC LINK switch of this
camcorder to OUT, and connect the TC
LINK IN/OUT jack and the TC IN jack
of the other camcorder with a cable.
The time code of this camcorder
synchronizes with that of the connected
camcorder. [TC IN] appears on this
camcorder screen.
The other
This camcorder
Following conditions must be satisfied
to input time code.
camcorder
• The TC LINK switch is set to IN, and there
are input time code data.
• Recording standby
• The frame rate of this camcorder time code
and that of the input time code are the same.
• The input time code is advancing.
b Notes
• The output time code from the TC LINK IN/
OUT jack are as follows:
– 50i/25p: 25-frame
The time code remains synchronized, even if
the other camcorder is disconnected.
b Notes
z Tips
• Connect the camcorders when both camcorders
are recording standby.
• You can output time code from this camcorder
also when the camcorders are connected via the
SDI jacks.
• If the frame rate of the input time code differ
from that of this camcorder, or the input time
code is not advancing, the input time code is not
regarded as effective time code. The input time
code to the TC LINK IN/OUT jack are as
follows:
– 50i/25p: 25-frame
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning the functions to the ASSIGN buttons
Some functions can be assigned to the
ASSIGN buttons for use. You can assign a
ASSIGN 4-6 buttons
single function to any one of the ASSIGN 1
to 7 buttons.
ASSIGN 1-3 buttons
Functions you can assign to the
ASSIGN buttons
The buttons in parentheses indicate that the
functions are assigned to the buttons by
default.
button)
• PUSH AUTO IRIS (p. 28)
• HYPER GAIN (p. 71)
• BACK LIGHT (p. 73)
• SPOTLIGHT (p. 73)
• STEADYSHOT (p. 73)
• FOCUS MACRO (p. 74)
• D.EXTENDER (p. 75)
• FADER (p. 75)
ASSIGN 7/
EXPANDED
• PEAKING (p. 81)
FOCUS button
• MARKER (p. 81)
• MODE (p. 57)
1
2
Press the MENU button B.
Select
(OTHERS) t [ASSIGN
BUTTON] with the SEL/PUSH
EXEC dial A.
3
Select the ASSIGN button to
which you want to assign a
function with the SEL/PUSH
EXEC dial A.
Continued ,
45
Download from Www.Somanuals.com. All Manuals Search And Download.
•
[--------] appears if no function is assigned
to the ASSIGN button.
4
Select the function that you want
to assign with the SEL/PUSH
EXEC dial A.
5
6
7
Select [OK] with the SEL/PUSH
EXEC dial A.
Select [
RETURN] with the SEL/
PUSH EXEC dial A.
Press the MENU button B to hide
the menu screen.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
VISUAL INDEX button
ASSIGN 6/VISUAL INDEX button
You can play back movies as follows:
MODE button
VOLUME button
1
Slide the POWER switch to ON.
Press and hold the
green button.
2
Press the VISUAL INDEX button.
The VISUAL INDEX screen appears after a few seconds.
Recording media
Playback mode
Previous
Next
Thumbnail
(movie)
Current movie
data (p. 48)
You can display the VISUAL INDEX screen also by pressing the MODE button, followed
by touching [PLAY] t [VISUAL INDEX] on the screen.
You can turn on or off the time and date display on the thumbnails by pressing the
DISPLAY button.
Continued ,
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback (Continued)
3
Play back movies.
1 Touch the recording media you want to play back.
: Memory card A
: Memory card B
: Flash memory unit
2 Touch the playback mode, and select the desired image quality of movies.
Playback mode
: High definition image quality (HD)
: Standard definition image quality (SD)
3 Touch twice the thumbnail of the movie you want to play back.
The first touch will show the information on the movie at the lower part of the screen.
ADate and time of recording started
BResolution
CFrame rate
DRecord mode
EDuration
FTime code of recording started
Time code will not be displayed correctly when you play back recording media with no time
code, or recording media with time code that your camcorder does not support.
GGPS data (HXR-NX5E/NX5P)
Appears on the movie that was recorded with the GPS switch set to ON.
HLPCM recording
Appears when audio is recorded in Linear PCM. This does not appear for movies in the
standard definition image quality (SD).
• i appears with the movie that has been most recently played back or recorded. If you touch the
movie with i, you can continue playback from the previous time.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Your camcorder starts playing the selected movie.
Previous
Stop
Next
Fast forward
Pause/Play
Fast reverse
b Notes
• You may not be able to play back movies recorded on other camcorders.
z Tips
• When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
screen.
• Touch
/
during pause to play back movies slowly.
• As you repeat touching
/
during playback, movies are played back as fast as about 5 times
t about 10 times t about 30 times t about 60 times.
• Reduced-size images which enable you to view many movies at the same time on the VISUAL INDEX
screen are called “thumbnails.”
• You can operate playback using the PREV/PLAY/NEXT/STOP/PAUSE/SCAN/SLOW buttons on the
camcorder.
To adjust the volume
Adjust the volume with the VOLUME buttons.
To return to the recording mode
Press the VISUAL INDEX button.
Viewing still images
You can create still images by capturing scenes from movies that you recorded on your
camcorder (p. 60).
View still images.
1 Touch the recording media you want to view.
: Memory card A
: Memory card B
: Flash memory unit
Continued ,
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback (Continued)
2 Touch the playback mode, then select
(still image).
Playback mode
3 Touch twice the thumbnail of the still image you want to view.
The first touch will show the information on the still image at the lower part of the screen.
ADate and time of recording
BResolution
CImage size
DPlayback folder
EPlayback folder edge
Indicates that this is the first or the last page of the playback folder. This does not appear
when there is only 1 playback folder.
FGPS data (HXR-NX5E/NX5P)
Appears on a still image that was created from a movie recorded with the GPS switch set to
ON.
• B appears on a still image recorded on a memory card.
Your camcorder displays the selected still image.
Next
VISUAL INDEX
Previous
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/checking the settings in your
camcorder
Displaying recording data (Data
code)
You can display information, including
date, time, camera data and GPS
triangulation data (HXR-NX5E/NX5P)
automatically stored during recording on
the screen during playback.
Press the DATA CODE button A
during playback or pause.
The screen changes like “date and time
display t camera data display t GPS
triangulation data (HXR-NX5E/NX5P) t
no display” as you press the button.
Changing the screen
A SteadyShot
You can turn on and off the display of the
time code, and other information on the
screen.
B Exposure
appears during playback of the
movie recorded with the iris, gain or
shutter speed automatically adjusted.
appears during playback of the
movie recorded with the iris, gain or
shutter speed manually adjusted.
Press the DISPLAY button B.
The screen indicators turn on (displayed)
and off (not displayed) as you press the
button.
In the recording mode, the screen changes
like “detailed display t simple display t
no display” as you press the button.
C Iris
appears in the iris value display
area during playback of the movie
recorded with the iris manually adjusted
to its maximum value.
D Gain
E Shutter speed
F White balance
z Tips
• You can display the screen indicators during
playback on a TV. Select [ALL OUTPUT] of
Continued ,
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/checking the settings in your camcorder (Continued)
appears during playback of the
movie recorded with [MANU WB
TEMP].
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume
• Output signal setup ([VIDEO OUT], etc.)
• Functions assigned to the ASSIGN
buttons (p. 45)
b Notes
• The exposure correction value (EV), shutter
speed, iris and flash on/off will be displayed
during viewing still images.
• When you play back the memory card on other
devices, the camera data may be displayed
incorrectly. Confirm the correct camera data on
your camcorder.
• When GPS triangulation data is displayed,
latitude, longitude, date and time of recording
are displayed in the data code area (HXR-
NX5E/NX5P).
• Camera setup (p. 71)
• Record button setup (p. 23)
You can check the record button setting.
• You can select UTC time or local time for the
date and time display with [GPS TIME
DISPLAY] in the menu (HXR-NX5E/NX5P).
• If you record without receiving GPS data, [-- --
----] and [--:--:--] will be displayed (HXR-
NX5E/NX5P).
• Recording media information
You can check the estimated used and free
spaces.
• Battery Info
You can check the remaining capacity of
the attached battery.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press the STATUS CHECK button
D.
Turn the SEL/PUSH EXEC dial C
until a desired display shows up
on the screen.
AUDIO t OUTPUT t ASSIGN t
CAMERA t REC BUTTON SET t
MEDIA INFO t BATTERY INFO
Setup items are displayed according to
the settings of the camcorder when it is
turned on.
To hide the display
Press the STATUS CHECK button D.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a monitor or a TV
Playback image quality depends on the type of monitor or TV, or the jacks used to make the
connection.
You do not need an audio cable to connect a monitor that supports SDI audio input via an SDI
cable. If the monitor does not support SDI audio input, you must connect the red and white
jacks with an audio cable. When you connect the monitor with the component video cable,
you must connect the red and white jacks with an A/V connecting cable.
Set
(REC/OUT SET) menu t [VIDEO OUT] t [OUTPUT SELECT] to output signals
from the respective jacks.
Monitor/TV
To audio/video
input jacks
A/V connecting cable
(supplied)
To component
input jacks
Component video cable
(supplied)
To HDMI input
jack
HDMI cable (sold
separately)
To SDI jack
Signal flow
75 Ω (ohms) coaxial cable
(commercially available)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Select the jack to output signals with [OUTPUT SELECT].
[OUTPUT SELECT]
setting
SDI OUT
HDMI OUT
COMPONENT OUT
VIDEO OUT
[SDI]
a
-
a
a
-
-
*1
-
*2
[HDMI]
-
-
*3
[COMPONENT]
-
a
-
[VIDEO]
-
-
-
a
1
*
*
When the HDMI OUT jack is not connected, signals are output from the COMPONENT OUT jack.
2
When the HDMI OUT and COMPONENT OUT jacks are not connected, signals are output from the
VIDEO OUT jack.
3
*
When the COMPONENT OUT jack is not connected, signals are output from the VIDEO OUT jack.
• Output resolution depends on the settings of [SDI/HDMI/COMPONENT].
Output resolution
[SDI/HDMI/
HD/SD COMPONENT]
setting
COMPONENT
SDI OUT
HDMI OUT
VIDEO OUT
OUT
720p
1080i
576p
576i
576i
576i
576p
576i
720p/576i
720p
1080i
720p
1080i
576p
576i
576i
576i
576p
576i
576i
576i
576i
576i
576i
576i
576i
576i
1080i/576i
HD
576p
No output
576i
576i
720p/576i
576i
1080i/576i
576i
SD
576p
No output
576i
576i
• If you set [SDI/HDMI/COMPONENT] to [576p], no signals are output from the SDI OUT jack.
• Use an HDMI cable with the HDMI logo.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the movies.
• Images and sounds may not be reproduced correctly on some monitors or TVs.
• Do not connect the output jacks of the camcorder with the output jacks of the monitor or TV. A
malfunction may be caused.
• This camcorder is not compatible with “BRAVIA” sync.
z Tips
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
Continued ,
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a monitor or a TV (Continued)
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (commercially available) to view playback images.
TV/VCR
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Operating the MODE menu
You can edit the recorded movies, format
recording media, etc.
4
Touch the desired item.
Example: [DELETE]
MODE button
POWER switch
5
Operate following the
instructions on the screen.
MODE button
To hide the MODE menu screen
Touch
, or press the MODE button.
To return to the previous screen
1
2
Set the POWER switch to ON.
Press the MODE button.
Touch
.
3
Touch the desired category.
Example: [EDIT] category
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting recorded images (Protect)
Protect movies and still images to avoid
deleting them by mistake.
To undo the protection of movies and
still images
Touch the movie or still image marked with
- in step 4.
- disappears.
z Tips
• You can also protect movies and still images by
pressing the MENU button on the VISUAL
INDEX screen or the playback screen.
1
2
3
Press the MODE button.
Touch [EDIT] t [PROTECT].
To protect movies, touch [MOVIE
PROTECT] t select the desired
recording media and image
quality.
To protect still images, touch [PHOTO
PROTECT] t select the desired
recording media.
4
Touch the movies or still images
to be protected.
- is displayed on the selected images.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
• You can select up to 100 images at one time.
5
Touch
t [YES] t
.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playlist of movies
b Notes
The Playlist is a list showing thumbnails of
the movies that you have selected.
The original movies are not changed even if
you edit or erase the movies added to the
Playlist.
• Do not remove the battery pack, the AC
Adaptor/Charger or the recording media that
contains the movies from your camcorder
during the operation. It may damage the
recording media.
• You cannot add still images to a Playlist.
Creating the Playlist
z Tips
b Notes
• You can add a maximum of 999 high definition
image quality (HD) movies, or 99 standard
definition image quality (SD) movies to the
Playlist.
• High definition image quality (HD) movies and
standard definition image quality (SD) movies
are added to individual Playlists.
• You can also add movies by pressing the
MENU button on the VISUAL INDEX screen,
the playback screen or the Playlist screen.
1
2
Press the MODE button.
Playing the Playlist
Touch [EDIT] t [PLAYLIST EDIT]
t [ADD] t select the desired
recording media and image
quality.
1
2
Press the MODE button.
Touch [PLAY] t [PLAYLIST] t
select the desired recording
media and image quality.
3
Touch the movie to be added to
the Playlist.
Movies added to the Playlist appear.
is displayed on the selected movies.
3
Touch the movie you want to play
back.
The Playlist is played back from the
selected movie to the end, then the
screen returns to the Playlist screen.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
To erase unnecessary movies from
the Playlist
1 Press the MODE button.
4
Touch
t [YES] t
.
2 Touch [EDIT] t [PLAYLIST EDIT]
t [ERASE] t select the desired
recording media and image quality.
• To erase all the movies from the Playlist,
touch [EDIT] t [PLAYLIST EDIT] t
Continued ,
59
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
Capturing still images
from a movie
You can save a selected frame from a
recorded movie as a still image.
[ERASE ALL] t select the desired
recording media and image quality.
3 Touch the movie to be erased from the
list.
1
2
Press the MODE button.
is displayed on the selected movies.
Touch [EDIT] t [PHOTO
CAPTURE] t select the desired
recording media and image
quality.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
4 Touch
t [YES] t
.
z Tips
3
4
Touch the movie to be captured.
• Even if you erase a movie from a Playlist, the
original movie is not deleted.
• You can also erase movies by pressing the
MENU button on the Playlist screen or the
Playlist playback screen.
The selected movie starts playback.
Touch
at the point where
you want to capture.
To change the order within the Playlist
The movie pauses. Play and pause
1 Press the MODE button.
toggles as you press
.
2 Touch [EDIT] t [PLAYLIST EDIT]
t [MOVE] t select the desired
recording media and image quality.
After you select the point with
fine adjustment with
, make
/
.
3 Touch the movie to be moved.
is displayed on the selected movies.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
4 Touch
.
Returns to the beginning of the selected
movie
5 Select the destination with B/b.
6 Touch
t [YES] t
.
z Tips
5
Touch
.
• When you select multiple movies, the movies
are moved following the order appearing in the
Playlist.
• You can also reorder movies by pressing the
MENU button on the Playlist screen.
The captured still image is saved on the
recording media selected for movies.
When capturing is finished, the screen
returns to pause.
• To continue capturing, touch
, then
repeat steps from step 4.
• To capture a still image from another movie,
touch , then repeat steps from step 3. If
you change the recording media and the
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing a movie
You can divide a movie at a designated
point.
image quality of the movies, start again
from the beginning.
6
Touch
t
.
1
2
Press the MODE button.
Touch [EDIT] t [DIVIDE] t
select the desired recording
media and image quality.
b Notes
• The image size is fixed depending on the image
quality of the movie:
– [2.1M] with high definition image quality
(HD)
– [0.2M] in 16:9 (wide) with standard definition
image quality (SD)
– [VGA(0.3M)] in 4:3 with standard definition
image quality (SD)
• The recording media where you want to save
still images should have enough free space.
• The recording date and time of captured still
images is the same as the recording date and
time of the movies.
• If the movie you are capturing from has no data
code, the recording date and time of the still
image will be the date and time you captured
from the movie.
3
4
Touch the movie to be divided.
The selected movie starts playback.
Touch
at the point where you
want to divide.
The movie pauses. Play and pause
toggles as you press
.
After you select the point with
fine adjustment with
, make
/
.
Returns to the beginning of the selected
movie
5
Touch
t [YES] t
.
b Notes
• You cannot restore movies once they are
divided.
• Do not remove the battery pack, the AC
Adaptor/Charger or the recording media that
contains the movies from your camcorder
during the operation. It may damage the
recording media.
Continued ,
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing a movie (Continued)
Deleting movies and
still images
You can free media space by deleting
movies and still images from recording
media.
• A slight difference may occur from the point
where you touch
and the actual dividing
point, as your camcorder selects the dividing
point based in about half-second increments.
• If you divide the original movie, the movie
added to the Playlist will also be divided.
b Notes
• You cannot restore images once they are
deleted.
• Do not remove the battery pack, the AC
Adaptor/Charger or the recording media that
contains the movies or still images from your
camcorder during the operation. It may damage
the recording media.
• You cannot delete protected movies and still
images. Undo the protection of the movies and
still images to delete them, before you try to
z Tips
• You can also divide a movie by pressing the
MENU button on the VISUAL INDEX screen
or the playback screen of movies.
• If the deleted movie is included in the Playlist
deleted also from the Playlist.
• Save important movies and still images in
z Tips
• You can select up to 100 images at one time.
• To delete all data recorded on the recording
media and recover all the recordable space of
1
2
3
Press the MODE button.
Touch [EDIT] t [DELETE].
To delete movies, touch [MOVIE
DELETE] t select the desired
recording media and image
quality.
To delete still images, touch [PHOTO
DELETE] t select the desired
recording media.
4
Touch the movies or still images
to be deleted.
is displayed on the selected images.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing movies/
copying still images
Dubbing movies
You can dub movies recorded on the
memory card to the flash memory unit.
Insert the memory card, and attach the flash
memory unit to your camcorder before the
operation.
z Tips
b Notes
• Press and hold the image down to preview
• If there is no image database file on the flash
memory unit, you cannot dub movies. in this
case, press the MODE button, then touch
[MANAGE MEDIA] t [REPAIR IMAGE DB
the image. Touch
previous screen.
to return to the
FILE] t [
], to create the image database
file.
5
Touch
t [YES] t
.
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor/Charger
to prevent your camcorder from running out of
power during the operation.
To delete all movies/still images at
one time
z Tips
• The original movie will not be deleted after
dubbing.
In step 3, touch [MOVIE DELETE ALL]
t select the desired recording media and
image quality t [YES] t [YES] t
.
• To delete all still images at one time, touch
[PHOTO DELETE ALL] t select the desired
recording media t [YES] t [YES] t
1
2
Press the MODE button.
.
b Notes
• Protected movies and still images are not
deleted from the recording media.
Touch [DUB/COPY] t [MOVIE
DUB].
z Tips
• You can also delete images by pressing the
3
Touch the type of dubbing.
MENU button on the VISUAL INDEX screen
or the playback screen of movies and still
images.
[DUB by select]: To select movies and
dub
[DUB ALL]: To dub all movies
recorded
4
5
Touch the recording media and
the image quality of the movie to
be dubbed.
Select the movie to be dubbed.
Continued ,
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing movies/copying still images (Continued)
[DUB by select]: Touch the movie to be
dubbed, and mark it with . You can
select multiple movies.
3
Touch the type of copying.
[COPY by select]: To select still images
and copy
[COPY ALL]: To copy all still images
recorded
4
5
Touch the recording media of the
still image to be copied.
Estimated remaining capacity of the flash
memory unit
Select the still image to be
copied.
z Tips
• Press and hold the image down to preview
[COPY by select]: Touch the still image
to be copied, and mark it with . You
can select multiple still images.
the image. Touch
previous screen.
to return to the
When you select [DUB ALL], follow
the instructions on the screen.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
6
Touch
t [YES] t
.
When you select [COPY ALL], follow
the instructions on the screen.
Copying still images
6
Touch
t [YES] t
.
You can copy still images recorded on the
memory card to the flash memory unit.
Insert the memory card, and attach the flash
memory unit to your camcorder before the
operation.
b Notes
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor/Charger
to prevent your camcorder from running out of
power during the operation.
1
2
Press the MODE button.
Touch [DUB/COPY] t [PHOTO
COPY].
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting the
Preventing data on
recording media from
being recovered
Unintelligible data will be written on
recording media. Thus, it may become
more difficult to recover any original data.
Even if you format recording media, there
may be some data remaining. Therefore,
when you dispose of or transfer the
recording media
Formatting deletes all data from the
recording media to recover recordable free
space.
b Notes
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor/Charger
to prevent your camcorder from running out of
power during the operation.
• To avoid the loss of important images, you
recording media.
recording media, it is recommended that
you perform a [
MEDIA EMPTY]/
[
MEDIA EMPTY]/[ MEDIA
EMPTY] operation.
• Protected movies and still images are also
deleted.
b Notes
• If you perform this operation, all stored data are
deleted. To avoid the loss of important images,
operation.
• You cannot perform this operation unless you
connect the AC Adaptor/Charger to the wall
outlet (wall socket).
• Disconnect all cables except the AC Adaptor/
Charger. Do not disconnect the AC Adaptor/
Charger during the operation.
1
2
Press the MODE button.
Touch [MANAGE MEDIA] t
[MEDIA FORMAT].
3
4
Touch the recording media to be
formatted.
• Do not apply any vibrations or shocks to your
camcorder during this operation.
1
Operate the camcorder on an
outside power source using the
AC Adaptor/Charger (p. 13).
Touch [YES] t [YES] t
.
b Notes
• While [Executing...] is displayed, do not operate
the buttons on the camcorder, disconnect the AC
Adaptor/Charger, or remove the recording
media from your camcorder. (The access lamp
is lit or flashing while formatting recording
media.)
2
3
4
Set the POWER switch to ON.
Press the MODE button.
Touch [MANAGE MEDIA] t
[MEDIA FORMAT].
5
Touch the recording media to be
formatted.
The format screen appears.
Continued ,
65
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
Repairing the image
database file
This function checks the management
information and the consistency of movies
and still images on the recording media, and
repairs any inconsistencies found.
6
Press and hold the STOP button
for more than 3 seconds.
b Notes
The media empty screen appears.
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor/Charger
to prevent your camcorder from running out of
power during the operation.
STOP button
1
2
Press the MODE button.
Touch [MANAGE MEDIA] t
[REPAIR IMAGE DB FILE].
3
4
Touch the recording media you
want to check the management
file.
7
Touch [YES] t [YES] t
.
Touch [YES].
b Notes
The management file check starts.
• It may take from several minutes to several
hours to empty recording media, depending on
the capacity. You can check the actual time
required on the LCD screen.
Touch
and quit the management
file check if no inconsistency is found.
• If you stop the operation while [Executing...]
appears, be sure to complete the operation by
performing [MEDIA FORMAT] or emptying
when you use the recording media next time.
5
Touch [YES].
After [Completed.] appears, touch
.
b Notes
• If you stop the operation while [Repairing the
Image Database File] appears, be sure to
complete the operation as described above when
you use the recording media next time.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu
Operating the menu
You can change various settings or make
detailed adjustments using the menu items
displayed on the screen.
3
Turn the SEL/PUSH EXEC dial
until the icon of the desired menu
is highlighted, then press the dial
to select the menu.
MENU button
V/v/B/b/EXEC buttons
CAMERA SET (p. 71)
REC/OUT SET (p. 77)
TC/UB SET (p. 85)
OTHERS (p. 86)
POWER switch
4
5
Turn the SEL/PUSH EXEC dial
until the desired menu item is
highlighted, then press the dial to
select the item.
SEL/PUSH EXEC dial/
B/b buttons
MENU button
z Tips
• You may select menu items also with the B/b
buttons.
1
2
Set the POWER switch to ON.
Turn the SEL/PUSH EXEC dial
until the desired setting is
highlighted, then press the dial to
confirm the setting.
Press the MENU button.
The menu screen appears.
Continued ,
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the menu (Continued)
6
Press the MENU button to hide
the menu screen.
To return to the previous screen, select
[
RETURN].
b Notes
• The available menu items vary depending on the
context of your camcorder during recording or
playback.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
.
z: Functions that return to the default settings when you switch the
format, perform the functions by the MODE button, or turn off the
camcorder.
Menu items
: Functions that can be assigned to the ASSIGN buttons.
(AUDIO SET) menu (p. 78)
(CAMERA SET) menu
z
(DISPLAY SET) menu
z
z
z
GPS TIME DISPLAY*
(REC/OUT SET) menu
(TC/UB SET) menu (p. 85)
Continued ,
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu items (Continued)
(OTHERS) menu (p. 86)
REC LAMP[F]
REC LAMP[R]
(SMOOTH SLOW REC)
menu (p. 42)
REC MODE
REC TIMING
PROTECT
ADD TO PLAYLIST
DIVIDE
DELETE
DELETE ALL
(PLAYLIST EDIT) menu
ADD
MOVE
ERASE
ERASE ALL
* HXR-NX5E/NX5P only
70
Download from Www.Somanuals.com. All Manuals Search And Download.
(CAMERA SET)
menu
Settings to adjust your camcorder to the
HYPER GAIN
When you set this function to [ON]
(
), you can increase the gain to its
limit. The default setting is [OFF].
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
b Notes
• During the hyper gain, the picture quality will
be reduced due to noise.
• This function returns to the default setting when
you switch the format, perform the function by
the MODE button, or turn off the camcorder.
• When you record a high definition image
quality (HD) movie with [HYPER GAIN] set to
[ON] and play it with the data code, the gain
value is displayed as [---].
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH
EXEC dial.
GAIN SET
z Tips
You can set gain values for H, M and L
positions of the GAIN switch. The default
settings of [H], [M] and [L] are 18 dB, 9 dB
and 0 dB, respectively.
• It is recommended to use this function with
manual focus.
• You can assign this function to an ASSIGN
1 Select [H], [M] or [L] with the SEL/
PUSH EXEC dial.
AGC LIMIT
2 Set the gain value with the SEL/PUSH
EXEC dial, and press the dial.
You can select the upper limit for the Auto
Gain Control (AGC) from [OFF] (21 dB,
the default setting), [18dB], [15dB],
You can select the value between -6 dB
and 21 dB by 3 dB. The larger the value,
the higher the gain.
[12dB], [9dB], [6dB], [3dB] and [0dB].
3 Select [OK] with the SEL/PUSH EXEC
b Notes
• If you adjust the gain manually, you cannot
obtain the effect of [AGC LIMIT].
dial.
4 Press the MENU button to hide the
menu screen.
MINUS AGC
SMOOTH GAIN
When you set this function to [ON], the
automatic gain control range can be
You can set the transition speed at which
the gain setting shifts from one value to
another, set for the GAIN switch positions,
when you switch the GAIN switch from a
position to another. You can select the
transition speed from [FAST], [MIDDLE]
and [SLOW] or set to [OFF]. The default
setting is [OFF].
expanded to the negative range. Especially
in a bright environment, minus gain control
allows more suitable gain setting and
enables low noise recording. The dynamic
range of the camcorder is not reduced when
you set [MINUS AGC] to [ON].
BON
Enables minus gain control (up to -3 dB)
during automatic gain control, as required.
Continued ,
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH EXEC dial.
OFF
BINTELLIGENT
Disables minus gain control during
automatic gain control.
Automatically adjusts the white balance so
that scenes look natural for the light
source.
IRIS RING ROTATE
HIGH
Automatically adjusts the white balance
while reducing redness or blueness.
You can select the operating direction of
the iris ring.
MIDDLE
LOW
BNORMAL
Makes images dark with clockwise
rotation of the iris ring.
Automatically adjusts the white balance
while increasing redness or blueness.
OPPOSITE
Makes images dark with counter-
clockwise rotation of the iris ring.
b Notes
• This is only effective when white balance is
adjusted automatically.
• [ATW SENS] is not effective under a clear sky
or the sun.
z Tips
• You can assign this function to an ASSIGN
SMOOTH WB
WB PRESET
You can set the transition speed at which
the color temperature values shifts from one
value to another, set for the white balance
memory switch positions, when you switch
the white balance memory switch from a
position to another. You can select the
transition speed from [FAST], [MIDDLE]
and [SLOW] or set to [OFF]. The default
You can use the preset white balance. For
WB OUTDOOR LEVEL
You can set an offset value to adjust the
outdoor white balance when you set [WB
PRESET] to [OUTDOOR]. You can select
the offset value from [-7] (bluish) -
[0](normal) - [+7] (reddish). The default
setting is [0].
setting is [OFF].
AE SHIFT
x ON/OFF
WB TEMP SET
You can turn on or off the function. When
[ON] is selected,
and selected value
You can set the color temperature between
2300K and 15000K in 100K steps when
you set [WB PRESET] to [MANU WB
TEMP].
appear on the screen.
x LEVEL
You can set an offset value to adjust the
automatic exposure adjustment value from
[-7] (dark) - [0] (standard) - [+7] (bright)
with the SEL/PUSH EXEC dial. The
default setting is [0].
ATW SENS
You can set the auto white balance
operation under a reddish light source such
as an incandescent lamp or candle, or under
a bluish light source such as in outdoor
shade.
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
• This function is not effective temporarily when
[HYPER GAIN] is set to [ON].
• [BACK LIGHT] is set to [OFF] if all of iris,
gain, and shutter speed are adjusted manually.
• [BACK LIGHT] is set to [OFF] when [HYPER
GAIN] is set to [ON].
z Tips
• You can assign an ASSIGN button to work as
z Tips
• You can assign this function to an ASSIGN
AE RESPONSE
You can select the speed at which the
exposure is adjusted automatically
following the changes in the brightness of
the subject. You can select the speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
SPOTLIGHT
When you set this function to [ON] ( ),
you can prevent overexposure of light while
recording a subject under strong light, such
as a stage. For example, you can prevent
people's faces from being over-exposed.
The default setting is [OFF].
AUTO IRIS LIMIT
b Notes
• [SPOTLIGHT] is set to [OFF] when you set
[BACK LIGHT] to [ON].
• [SPOTLIGHT] is set to [OFF] if all of iris, gain,
and shutter speed are adjusted manually.
You can select the highest iris value for the
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
• [SPOTLIGHT] is set to [OFF] when [HYPER
GAIN] is set to [ON].
b Notes
• This function is not effective during the manual
iris adjustment.
z Tips
• You can assign this function to an ASSIGN
FLICKER REDUCE
BON
STEADYSHOT
Reduces flickering. Flickering of the
screen under a light source such as
fluorescent lamps will be reduced.
x SET
BSTEADYSHOT
You can activate the camera-shake
reduction setting.
OFF
Not reduce flickering.
b Notes
ACTIVE STEADYSHOT (
You can use the camera-shake reduction
with more powerful effect.
)
• Flickering may not be reduced for certain light
sources.
.
OFF
Select [OFF] (
BACK LIGHT
) when you use a
tripod (sold separately) to make images
look natural.
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON].
Continued ,
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH EXEC dial.
x STEADYSHOT TYPE
You can select a type of camera-shake
AF ASSIST
reduction for different recording situations.
When you set this function to [ON], you
can temporarily focus manually using the
focus ring during the auto focus adjustment.
The default setting is [OFF].
HARD
Reduces camera shake considerably.
This setting is not suitable for recording
when you are using techniques like
panning or tilting.
b Notes
• This function is effective only when the FOCUS
switch is set to AUTO (p. 27).
BSTANDARD
Standard camera-shake reduction.
FOCUS MACRO
SOFT
Reduces camera shakes moderately. Slight
unsteadiness remains in movies, which
make the movies look as they are.
When you set this function to [ON], you
can focus on a subject within 80 cm (about
2 5/8 feet). The default setting is [ON].
When you set this function to [OFF]
WIDE CONVERSION
(
), you can set fine focus on a
This item is provided for a wide
conversion lens (sold separately), and
especially effective for Sony wide
conversion lens.
subject further than 80 cm regardless of the
zoom position, although you will lose focus
on a subject within 80 cm.
z Tips
x ACTIVE STEADYSHOT TYPE
You can select a type of powerful camera-
shake reduction for different recording
situations.
• You can assign this function to an ASSIGN
HANDLE ZOOM
BSTANDARD
Reduces camera shakes more powerfully
while you are walking or moving around.
You can select the zoom speed for the FIX
position of the handle zoom switch from [1]
(slow) through [8] (fast). The default setting
is [3].
WIDE CONVERSION
This item is provided for using a wide
conversion lens (sold separately) in
[ACTIVE STEADYSHOT] mode, and
especially effective for Sony wide
conversion lens.
SPEED ZOOM
When you set this function to [ON], you
can increase the zoom speed of the power
zoom lever and the handle zoom. The
default setting is [OFF].
b Notes
• At the [ACTIVE STEADYSHOT] setting, the
imaging field shifts slightly to the telephoto
side, and the resolution will deteriorate slightly,
as well.
b Notes
• When you set this function to [ON], the
operation sound of the zoom may also be
recorded.
z Tips
• You can assign an ASSIGN button to work as
74
Download from Www.Somanuals.com. All Manuals Search And Download.
D.EXTENDER
Fading out
Fading in
When you set this function to [ON]
(
), the displayed image becomes
WHITE FADER
about 1.5 times larger. The image quality
decreases because the image is digitally
processed. This function helps you to focus
on far-away subjects such as a wild bird
away at a distance. The default setting is
[OFF].
BLACK FADER
b Notes
• The function returns to the default setting when
you switch the format, perform the function by
the MODE button, or turn off the camcorder.
• You cannot set this function when [HD 720/50p
FX]/[HD 720/50p FH] is selected in [REC
b Notes
• This function is automatically set to [OFF] (the
default setting) when you switch the format,
perform the function by the MODE button, or
turn off the camcorder.
• You cannot set [FADER], when different media
are selected for the record button and the handle
record button in [REC BUTTON SET].
• You cannot set this function when the remaining
space of recording media is less than 1 minute.
z Tips
• You can assign this function to an ASSIGN
FADER
z Tips
You can add visual effects to transition
between scenes.
• You can assign this function to an ASSIGN
1 Select [WHITE FADER] or [BLACK
FADER] during standby to fade in with the
selected effect, or recording to fade out
with the selected effect.
2 Press the record button.
The fader indicator stops flashing and
disappears when the fading is complete.
x.v.Color
When you set this function to [ON]
(
), you can record with the wider
color range. Your camcorder can reproduce
brilliant and vivid colors for flowers and the
beautiful blue-green of tropical oceans.
The default setting is [OFF].
To cancel before starting the operation,
select [OFF] in step 1.
b Notes
The setting will be cleared every time you
press the record button.
• The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
• You cannot set [x.v.Color] in the following
cases:
– When either memory card or flash memory
unit is set to record in standard definition
image quality (SD).
– During recording movies
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
Continued ,
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH EXEC dial.
COLOR BAR
x ON/OFF
When you select [ON], you can display
color bars on the screen or record them on
recording media. This function helps you to
adjust colors when you view movies
recorded with your camcorder on a TV or a
monitor. The default setting is [OFF].
TYPE 3
b Notes
• This function is automatically set to [OFF]
when you switch the format, perform the
function by the MODE button, or turn off the
camcorder.
• You cannot change the setting during recording
or expanded focus operation, or when fader is
set.
TYPE 4 (75% brightness of TYPE 3)
x TONE
Outputs audio tone signals (1 kHz: full bit
-18 dB) when you set [TONE] to [ON]. The
default setting is [OFF].
x TYPE
Selects a type of the color bars.
z Tips
• You can assign an ASSIGN button to work as
TYPE 1
TYPE 2
76
Download from Www.Somanuals.com. All Manuals Search And Download.
(REC/OUT SET)
menu
Recording settings, input and output
VIDEO OUT
x OUTPUT SELECT
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
You can select the jack to the output signal.
SDI
menu items.
Press the MENU button t select
(REC/OUT SET) with the SEL/PUSH
EXEC dial.
BHDMI
COMPONENT
VIDEO
b Notes
• When you switch the setting between [SDI] and
[HDMI], the screen will go out momentarily,
and the image and sound will be intermitted.
REC SET
You can select a recording format.
x SDI/HDMI/COMPONENT
You can select the resolution of the output
signal from the SDI/HDMI/COMPONENT
jacks.
x
/
SET
x REC FORMAT
720p/576i
B1080i/576i
576p
x REC BUTTON SET
x
WIDE REC
576i
You can set the aspect ratio when recording
in standard definition image quality (SD).
x DOWN CONVERT TYPE
You can select a down convert type when
you down-covert video signal.
Use this function for outputting movies and
still images recorded in 16:9.
BON
Records in 16:9.
OFF (
)
Records in 4:3. [MARKER] is set to [ON],
and [ASPECT] to [4:3] automatically. In
the case of [SMOOTH SLOW REC], black
bands appear at both sides of the screen.
BSQUEEZE
Outputs a horizontally compressed image
while maintaining its original height.
LETTER BOX (16:9)
LETTER BOX (15:9)
LETTER BOX (14:9)
LETTER BOX (13:9)
Outputs a vertically compressed image
while maintaining its original aspect ratio.
b Notes
• When recording in high definition image quality
(HD), the aspect ratio is fixed to 16:9.
• When [
[MARKER] is set to [ON] and the [ASPECT]
4:3 indicator appears automatically. At the same
time, when [CENTER], [SAFETY ZONE], or
[GUIDEFRAME] is not set to [OFF], a marker
is displayed in accordance with the setting. If
you do not want to display a marker, set
WIDE REC] is set to [OFF],
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
Continued ,
77
Download from Www.Somanuals.com. All Manuals Search And Download.
(AUDIO SET) menu
Press the MENU button t select
(REC/OUT SET) with the SEL/PUSH
EXEC dial.
Settings for the audio recording
(
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 67 for details on selecting
menu items.
Press the MENU button t select
(AUDIO SET) with the SEL/PUSH
EXEC dial.
b Notes
• When you view a movie recorded in standard
definition image quality (SD) with [
WIDE
REC] set to [ON] on a standard 4:3 TV, images
of the movie may appear horizontally
compressed while maintaining its original
height. In such a case, select LETTER BOX or
[EDGE CROP].
• If you change the setting from [SQUEEZE] to
another option, or from another option to
[SQUEEZE], the screen will go out
momentarily, and the image and sound will be
intermitted.
AUDIO FORMAT
You can set the audio format for high
definition image quality (HD) recording.
x SD-SDI SET
BLINEAR PCM (
Records in Linear PCM system.
)
VIDEO INDEX
Superimposes the index signal, including
aspect ratio and signal system, on the SDI
output signal. The default setting is
[ON].
DOLBY DIGITAL (
Records in Dolby Digital system.
)
b Notes
BRP188 ATC
• Audio format is fixed to [DOLBY DIGITAL]
with the standard definition image quality (SD)
recording.
Superimposes RP188 ATC (Ancillary
Time Code) on the SDI output signal. The
default setting is [ON].
VITC LINE SEL
AUDIO LIMIT
Set the vertical blanking line of the SD
video signal to record VITC (Vertical
Interval Time Code) between 9 and 22.
The default setting is [19].
You can set the clipping-noise reduction
function for CH1/CH2.
BOFF
Disables the function.
ON
Enables the function.
b Notes
• This function is available only when you set the
AUTO/MAN (CH1/CH2) switch to MAN.
HEADPHONE OUT
You can set the sound to output to the
headphone when the HEADPHONE
MONITOR switch is set to STEREO MIX.
BSTEREO
Outputs in stereo.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
and INPUT2 switches are both set to MIC or
MONO
Outputs in monaural.
x AUDIO MANUAL GAIN
You can select either linked or separate
audio level control of CH1 and CH2 when
using an external microphone.
INT MIC SET
x INT MIC SENS
You can set recording sensitivity of the
internal microphone.
BSEPARATE
Separately controls the audio levels of
CH1 and CH2. Sound inputs from CH1
and CH2 will be recorded as separate
sound.
BNORMAL
Sensitivity that is normally used in
professional recordings.
HIGH
LINKED (
)
Sensitivity that is normally used in
consumer recordings.
appears on the status check
screen.
Controls the audio level of CH1 linked
with that of CH2. Sound inputs from CH1
and CH2 will be recorded as a set of sound
such as stereo sound.
status check screen.
appears on the
M
x INT MIC WIND
b Notes
BOFF
• This function is available when the CH1 and
CH2 switches are set to MAN and the INPUT1
and INPUT2 switches are both set to MIC or
• When you select [LINKED], you can adjust the
volume with the AUDIO LEVEL dial of CH1
Disables wind noise reduction.
ON
Enables wind noise reduction.
appears on the status check screen.
XLR SET
x INPUT1 TRIM
You can adjust the input signal level from
INPUT1.
You can select from [-18dB], [-12dB],
[-6dB], [0dB], [+6dB] and [+12dB]. The
default setting is [0dB].
x XLR AGC LINK
You can select either linked or separate
AGC (Auto Gain Control) of CH1 and CH2
when using an external microphone.
BSEPARATE
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
Separately applies the AGC for CH1/CH2.
Sound inputs from CH1/CH2 will be
recorded as separate sound.
LINKED (
)
x INPUT1 WIND
Applies the AGC of CH1 linked with that
of CH2. Sound inputs from CH1/CH2 will
be recorded as a set of sound such as stereo
BOFF
Disables wind noise reduction.
sound.
screen.
appears on the status check
A
ON
Enables wind noise reduction.
appears on the status check screen.
b Notes
• This function is available when the CH1 and
CH2 switches are set to AUTO and the INPUT1
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
Continued ,
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select
(AUDIO SET) with the SEL/PUSH EXEC dial.
x INPUT2 TRIM
x INPUT2 WIND
You can set INPUT2 in the same way as
INPUT1.
z Tips
• -48 dBu is set as 0 dB in your camcorder.
• Set INPUT TRIM to [0dB] for the supplied
microphone.
• The INPUT TRIM function adjusts the input
level from an external microphone. When using
a highly sensitive microphone or recording loud
sound, set this to the minus side. When using a
less sensitive microphone or recording quiet
sound, set it to the plus side.
• When recording loud sound, the sound may be
distorted at either the input point or the
recording point. If it is distorted at the input
point, adjust the sound using the INPUT TRIM
function. If it is distorted at the recording point,
lower the total volume level manually.
• If you set INPUT TRIM too far to the minus
side, the microphone volume becomes too low,
resulting in a poor signal to noise ratio.
• Test the effect of the [AUDIO SET] function
according to the microphone used or the sound
field of the recording site before actual
recording.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
(DISPLAY SET)
menu
Display settings of the display and the
DISPLAY OUTPUT, etc.)
x COLOR
You can select peaking color from
[WHITE], [RED] and [YELLOW]. The
default setting is [WHITE].
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
x LEVEL
You can select a peaking sensitivity from
[HIGH], [MIDDLE] and [LOW]. The
default setting is [MIDDLE].
b Notes
Press the MENU button t select
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
• The enhanced outlines will not be recorded on
the recording media.
z Tips
• You can focus more easily using this function in
combination with the expanded focus function
• You can assign an ASSIGN button to work as
ZEBRA
You can display a zebra pattern as a guide
for adjusting brightness.
x ON/OFF
When you select [ON],
and the
MARKER
brightness level appear on the screen. The
zebra pattern will not be recorded with the
image. The default setting is [OFF].
x ON/OFF
When you select [ON], you can display
markers. The default setting is [OFF].
Markers will not be recorded on the
recording media.
x LEVEL
You can select the brightness level between
70 and 100 or 100+. The default setting is
[70].
x CENTER
When you select [ON], you can display a
marker at the center of the screen. The
default setting is [ON].
z Tips
• The zebra pattern is a strip pattern displayed
over a part of an image on the screen when the
part is higher than the preset brightness level.
• You can assign an ASSIGN button to work as
x ASPECT
You can display markers at boundaries of
display area defined by the aspect ratio,
which you can select from [4:3], [13:9],
[14:9], and [15:9]. The default setting is
[OFF].
PEAKING
x ON/OFF
When you select [ON],
and you can display an image on the screen
with its outlines enhanced. This function
helps you to adjust the focus. The default
setting is [OFF].
appears
x SAFETY ZONE
When you select either one of [80% (16:9)],
[80% (4:3)], [90% (16:9)] or [90% (4:3)],
you can display markers at boundaries of
Continued ,
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select
(DISPLAY SET) with the SEL/PUSH EXEC dial.
display area that regular home TVs can
display. The default setting is [OFF].
CAMERA DATA DISPLAY
When you set this function to [ON], you
can constantly display the iris, gain and
shutter speed settings on the screen. The
default setting is [OFF].
x GUIDEFRAME
When you select [16:9] or [4:3], you can
display frame markers that help you to
check horizontal and vertical positions of a
subject. The default setting is [OFF].
b Notes
• Only the time code is output to an external
device via external output jacks when
[MARKER] is set to [ON], even if [DISPLAY
OUTPUT] is set to [ALL OUTPUT].
• You cannot display markers under following
conditions:
– [EXPANDED FOCUS]
– During [SMOOTH SLOW REC]
– When the current time is displayed after the
power is turned on
• You can display markers only on the LCD panel
and viewfinder. You cannot display them on an
external device.
Iris value
Shutter speed value
Gain value
z Tips
• The settings appear on the screen during the
manual adjustment regardless of the settings of
this function.
indicates that the settings are automatically
adjusted values.
• The displayed settings are different from the
settings that will be displayed when you press
•
z Tips
AUDIO LEVEL DISPLAY
• You can display all types of markers at the same
time.
• You can obtain a balanced composition by
positioning the subject at the cross points of the
guideframe marker.
When you set this function to [ON], you
can display the audio level meter on the
screen. The default setting is [ON].
• You can assign an ASSIGN button to work as
EXPANDED FOCUS TYPE
You can set a type of the expanded focus
display.
Audio level meter
BTYPE 1
Simply enlarges images.
ZOOM DISPLAY
TYPE 2
BBAR
Enlarges and shows images in black and
white.
Displays a bar that indicates the zoom position.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
NUMBER
Displays a number (0 through 99) that
indicates the zoom position.
• Shutter speed slower than 360° are displayed in
multiples of 360°, such as 360° × 2.
LCD BRIGHT
FOCUS DISPLAY
You can adjust the brightness of the LCD
screen. Changes in the LCD brightness will
not affect the brightness of recording
images.
You can select how to display the focal
distance during manual focus.
BMETER
Displays the focal distance in meters.
z Tips
FEET
Displays the focal distance in feet.
LCD COLOR
SHUTTER DISPLAY
You can adjust the color level of the LCD
panel. Changes in the LCD color level will
not affect the color level of recording
images.
You can select how to display the shutter
speed.
BSECOND
Displays the shutter speed in seconds.
LCD BACKLIGHT LEVEL
DEGREE
Displays the shutter speed in degrees.
You can adjust the backlight level of the
LCD screen.
The shutter speed equal to the period that
your camcorder reads image data from the
image sensor is defined as 360 degrees.
The degree is calculated based on this
definition and displayed.
– When [REC FORMAT] is set to the
followings, 1/50 second is defined as 360
degrees.
HD 1080/50i FX SD 576/50i HQ
HD 1080/50i FH SD 576/50i HQ
HD 1080/50i HQ SD 576/50i HQ
HD 1080/50i LP SD 576/50i HQ
HD 720/50p FX SD 576/50i HQ
HD 720/50p FH SD 576/50i HQ
BNORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
– When [REC FORMAT] is set to the
followings, 1/25 second is defined as 360
degrees.
HD 1080/25p FX SD 576/25pSCAN HQ
HD 1080/25p FH SD 576/25pSCAN HQ
VF BACKLIGHT
You can adjust the brightness of the
viewfinder.
For details on [REC FORMAT], see page
25.
BNORMAL
Standard brightness.
b Notes
BRIGHT
Brightens the viewfinder screen.
• When you press the DATA CODE button, the
shutter speed will be displayed in seconds
regardless of the setting of this function.
Continued ,
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select
(DISPLAY SET) with the SEL/PUSH EXEC dial.
b Notes
UTC TIME
Displays the coordinated universal time.
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
b Notes
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
• In the case of still images, if you select [LOCAL
TIME], the triangulated time is displayed as [---
-----].
VF COLOR
DISPLAY OUTPUT
BON
You can select where to output the display
information, such as time code.
Displays images in the viewfinder in color.
OFF
BLCD PANEL
Outputs the information to the LCD screen
and viewfinder.
Displays images in the viewfinder in black
and white.
VF POWERMODE
ALL OUTPUT
Outputs the information to the LCD
screen, viewfinder, SDI output, HDMI
output, component output and video
output.
BAUTO
Turns on the viewfinder while you close
the LCD panel or record in mirror mode.
ON
b Notes
Always turns on the viewfinder.
• Only the time code is output when [MARKER]
is set to [ON] and a marker is displayed on the
screen.
REMAINING
AUTO
Displays the remaining recording time
available for movies when you re-enter
movie recording mode or switch to
[SMOOTH SLOW REC]. When the
remaining time is 5 minutes or more, the
display goes off after 8 seconds.
BON
Always displays the remaining recording
time available for movies.
GPS TIME DISPLAY (HXR-NX5E/
NX5P)
You can select the GPS time as the data
code.
BLOCAL TIME
Displays the time with the time difference
compensated for. The local time with the
summer time setting taken into account is
displayed.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
(TC/UB SET) menu
(TC PRESET/UB PRESET, etc.)
TC MAKE
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
BPRESET
Records the newly set time code on the
recording media.
menu items.
Press the MENU button t select
(TC/UB SET) with the SEL/PUSH EXEC
dial.
REGENERATE
Reads the last time code of the previous
recording from the recording media and
records the new time code consecutively
from the last time code during the
backspace editing.
TC PRESET
The time code runs in [REC RUN] mode
regardless of the setting of [TC RUN].
UB PRESET
UB TIME REC
BOFF
Does not save the actual time in the user
bit code.
TC RUN
You can select how the time code advances.
ON
Saves the actual time in the user bit code.
BREC RUN
Advances the time code only during
recording.
Select this setting to record the time code
continuous from the last time code of the
previous recording.
b Notes
• The last 2 digits are fixed to 00 when it is set to
[ON].
FREE RUN
Advances the time code regardless of
operation of your camcorder.
b Notes
• Even if the time code advances in the [REC
RUN] mode, the time code may not be recorded
sequentially in the following cases:
– When the recording format is changed.
– When the images are recorded on the memory
card and the flash memory unit
simultaneously.
– When the recording media is removed.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
(OTHERS) menu
Settings while recording or other basic
DATE REC
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
BOFF
Does not superimpose the date and time on
images.
menu items.
ON
Press the MENU button t select
(OTHERS) with the SEL/PUSH EXEC
dial.
Superimposes the date and time on images.
z Tips
• When zebra or peaking is activated, the date and
time characters are affected by the signal, but
properly recorded on images.
ASSIGN BUTTON
BEEP
CLOCK SET
BOFF
Cancels the melody.
ON
Activates a melody when you start/stop
recording, or when you are warned with
warning indicators, etc.
AREA SET
You can adjust a time difference without
stopping the clock. When you use your
camcorder abroad, you can adjust the clock
to the local time.
REC LAMP[F] (Recording lamp
[front])
When you set this function to [OFF], you
can turn off the front camera recording
lamp. The default setting is [ON].
SUMMERTIME
You can change this setting without
stopping the clock. Set to [ON] to move the
time forward 1 hour.
z Tips
• You can assign this function to an ASSIGN
BOFF
Does not set the summertime.
REC LAMP[R] (Recording lamp
[rear])
ON
Sets the summertime.
When you set this function to [OFF], you
can turn off the rear camera recording lamp.
The default setting is [ON].
LANGUAGE
You can select the language to be used on
the LCD screen.
z Tips
• You can assign this function to an ASSIGN
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) in case that you cannot find
your native tongue among the options.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
When you set this function to [ON], you
can use the supplied Wireless Remote
[ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another
remote control unit.
OPERATION TIME
Displays the total hours of operation in 10-
hour increments.
CALIBRATION
87
Download from Www.Somanuals.com. All Manuals Search And Download.
CSoannvecitinnggwithima Caomgpuetesr with a computer
Preparing a computer (Windows)
Hard disk
You can perform following operations
using “Content Management Utility.”
Disk volume required for installation:
Approximately 100 MB
Only the NTFS or exFAT file system can be
used for importing videos or registering
them for viewing.
• Importing images to a computer
• Viewing imported images
To save movies using a computer, install
the software from the supplied CD-ROM
“Content Management Utility” beforehand.
Use commercially available software to edit
images or create discs.
Display
Minimum 1,024 × 768 dots
Others
USB port (this must be provided as standard,
High-Speed USB (USB 2.0 compatible))
(CD-ROM drive is necessary for
installation)
Step 1 Checking the computer system
OS*1
Microsoft Windows XP SP3*2/Windows
Vista SP2*3/Windows 7
*1 Standard installation is required. Operation is
not assured if the OS has been upgraded or in a
multi-boot environment.
CPU
Use an Intel Core 2 Duo 2.20 GHz CPU or
faster to play back videos with high
definition image quality (HD) in the FX
mode.
Videos with high definition image quality
(HD) recorded in other than the FX mode
may be played back with a slower CPU.
Depending on the performance of your video
card, videos with high definition image
quality (HD) recorded using the FX mode
may be played back with a slower CPU than
that recommended above.
For the following operations, an Intel
Pentium III 1GHz or faster is necessary.
– Importing movies to the computer
– Processing with standard definition image
quality (SD)
*2 64-bit editions and Starter (Edition) are not
supported.
*3 Starter (Edition) is not supported.
b Notes
• Operation with all computer environments is not
assured.
• The supplied software “Content Management
Utility” is not supported by Macintosh
computers.
Step 2 Installing the supplied software
“Content Management Utility”
Install “Content Management Utility”
before connecting your camcorder to a
computer.
1 Confirm that your camcorder is not
Memory
connected to the computer.
For Windows XP: 512 MB or more (1 GB or
more is recommended.) However, 256 MB
or more is sufficient for processing only the
movies with standard definition image
quality (SD).
2 Turn on the computer.
• Log on as an Administrator for installation.
• Close all applications running on the
computer before installing the software.
3 Place the supplied CD-ROM “Content
Management Utility” in the disc drive of
your computer.
For Windows Vista/Windows 7: 1 GB or
more
The installation screen appears.
• If the screen does not appear, click [Start]
t [Computer] (in Windows XP, [My
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer]), then double-click
[SONYCMU(E:)] (CD-ROM).
4 Select the language for the application
to be installed, then click [OK].
5 When the install wizard screen appears,
click [Next].
qd Remove the CD-ROM from the
6 Confirm the license agreement, and if
computer.
you accept the terms, click [Next].
To disconnect your camcorder from
the computer
7 Select the drive or folder to install the
application, then click [Next].
8 Select the option to create the desk-top
1 Click the
icon at the bottom right of
shortcut, then click [Next].
the desktop of the computer t [Safely
remove USB Mass Storage Device-
Drive].
9 Turn on your camcorder, then connect
the camcorder to the computer using the
supplied USB cable.
2 Touch [END] t [YES] on the
camcorder screen.
3 Disconnect the USB cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.
0 Touch [
] or [
] on the camcorder
screen.
• If the [USB SELECT] screen does not
appear, press the MODE button, then touch
[MANAGE MEDIA] t [USB
CONNECT].
qa Click [Next].
qs Follow the on-screen instructions to
install the software.
• Restart the computer if required to complete
the installation.
When the installation is completed, the
following icon will appear, depending
on the selection in step 8.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
If you run into any problems using your camcorder, follow the flow chart below.
2 Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.
This operation will reset the date, time and area settings.
4 Consult your Sony dealer or local authorized Sony service facility.
Power sources/LCD screen/Wireless Remote Commander
The power does not turn on or abruptly turns off.
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Adaptor/Charger from the wall outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
The camcorder gets warm.
• The camcorder may get warmer while you use it. This is not a malfunction.
The remaining battery time indicator does not indicate the correct time.
• Ambient temperature is too high or too low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
• The indicated time may not be correct in certain circumstances. For example, when you open
or close the LCD panel, it takes about 1 minute to display the correct remaining battery time.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
The battery pack discharges too quickly.
• Ambient temperature is too high or low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
The image remains on the LCD screen.
• This occurs if you disconnect the DK-415 cable or remove the battery pack without turning
off the power first. This is not a malfunction.
The image in the viewfinder is not clear.
The image in the viewfinder has disappeared.
• If you set [VF POWERMODE] to [AUTO], the finder light remains off while the LCD panel
The supplied Wireless Remote Commander does not function.
• Set [REMOTE CONTROL] to [ON] (p. 87).
• Remove any obstructions between the Wireless Remote Commander and the remote sensor
of the camcorder.
• Keep strong light sources, such as sunlight or overhead lighting, away from the remote
sensor, otherwise the Wireless Remote Commander may not function properly.
• Insert a fresh battery in the compartment with its +/– terminals matching those of the
Another video device malfunctions when you use the supplied Wireless
Remote Commander.
• Select a commander mode other than DVD2 for your video device.
• Cover the sensor of your video device with black paper.
When a device is connected to the REMOTE jack, the camcorder or the device
does not operate properly.
• The connected device may react slowly to some operations, such as zooming.
• If you disconnect the cable from the device while the cable is still connected to the
camcorder’s REMOTE jack, the camcorder may not restore the proper settings. Disconnect
the cable also from the camcorder’s REMOTE jack.
Continued ,
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Memory card/flash memory unit
The remaining movie recording indicator is not displayed.
• Set [
REMAINING] to [ON] to always display the remaining movie recording indicator
The camcorder does not operate with the memory card inserted.
The data file name is incorrect, or flashing.
• The file is damaged.
The recording media indicator is flashing.
• Something wrong happened to one of recording media. Stop recording of all recording media,
and repair the database file.
Images on the recording media cannot be deleted.
• You can select no more than 100 images to be deleted on the edit screen.
Recording
The recording does not start when you press the record button.
• There is no empty space on the recording media. Replace the recording media with new one,
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. Turn off your camcorder and leave it
for a while in a warm place.
• A particular record button is selected to start/stop recording. Check the record button setting
• Something wrong happened to one of recording media. Stop recording of all recording media,
and repair the database file.
The handle zoom does not work.
The access lamp remains lit even after recording was stopped.
• Your camcorder is recording the scene you have just shot on the memory card.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
The imaging field looks different.
• The imaging field may look different depending on the condition of your camcorder. This is
not a malfunction.
The actual recording time for movies is less than the expected recording time
of the recording media.
• Depending on the recording conditions, the time available for recording may be shorter, for
The camcorder does not keep the setting changes .
• The LCD backlight setting and the EXPANDED FOCUS setting are not stored.
• You disconnected the power sources when the POWER switch was set to ON. Before
disconnecting the battery or the AC Adaptor/Charger, set the POWER switch to OFF and
make sure that the access lamp is turned off.
There is a time difference between the point when the record button is pressed
and the point that the recording movie is started or stopped actually.
• On your camcorder, there may be a slight time difference between the point where you press
the record button and the actual point that recording movie starts/stops. This is not a
malfunction.
There are time differences in recording start/stop points of the simultaneously
recorded movies.
• When you do the simultaneous recording with [
] or [ ], there may be slight time lags in the recorded movies.
This is not a malfunction.
/
SET] set to [
:
:
:
:
The aspect ratio (16:9 (wide)/4:3) cannot be changed.
• The aspect ratio of high definition image quality (HD) movies is 16:9 (wide).
Automatic focus does not function.
[This function is currently not available.] appears when selecting a function on
the MODE menu.
• Try again after finishing all tasks currently selected on the MODE menu.
• If 720 is selected as [REC FORMAT] for [SMOOTH SLOW REC], select 1080 as [REC
FORMAT].
Menu items are grayed out or do not work.
• You cannot select grayed out display items in the current recording/playback situation.
Continued ,
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
• There are some functions you cannot activate simultaneously. The following list shows
examples of unworkable combinations of functions and menu items.
Cannot use
Situation
[BACK LIGHT],
[SPOTLIGHT], [ON/
OFF] of [AE SHIFT]
All of iris, gain, and shutter speed are set manually.
[HYPER GAIN] is set to [ON].
[FADER]
The record button and the handle record button are set to
different recording media.
The camcorder is unable to record images.
The recording media has less than 1 minute of remaining
capacity.
[COLOR BAR] is set to [ON].
[ZEBRA], [PEAKING],
[CAMERA DATA
DISPLAY]
[COLOR BAR] is set to [ON].
[ON/OFF] of [MARKER] [EXPANDED FOCUS] is set to [ON].
While the date and time are displayed when the power is turned
on.
[LCD BACKLIGHT
LEVEL],
AC power source is being used.
[VF BACKLIGHT]
[TC PRESET]
[TC MAKE] is set to [REGENERATE].
When inputting time code, [TC RUN] is set to [FREE RUN]
and [TC MAKE] is set to [PRESET].
[UB TIME REC]
Date and time are not set.
Date and time are not set.
[AREA SET],
[DATE REC],
[SUMMERTIME]
[x.v.Color]
[
/
SET] is set to [HD-SD] or [SD-HD].
[COLOR BAR]
Movies are being recorded.
[FADER] is selected.
[EXPANDED FOCUS] is set to [ON].
[D.EXTENDER]
[REC FORMAT] is set to [HD 720/50p FX] or [HD 720/50p
FH].
Iris, gain, shutter speed, or white balance cannot be adjusted manually.
• Set the AUTO/MANUAL switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
The subjects passing by the frame very fast appear crooked.
• This is called the focal plane phenomenon. This is not a malfunction. Because of the way that
the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
The LCD screen is too bright, and the subject cannot be seen.
• Set [BACK LIGHT] to [OFF].
• Set [HYPER GAIN] to [OFF].
The LCD screen is too dark, and the subject cannot be seen.
Horizontal stripes appear on the image.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
The image appears divided horizontally.
• This occurs when you light the subject using a flash. This can be avoided by using a shutter
Black bands appear when you record a TV screen or computer screen.
Fine patterns flicker, diagonal lines look jagged.
The time code is not recorded in sequence.
• The time code may not be recorded sequentially if you change the settings of [
SET] and [REC FORMAT].
/
Playback
The desired images cannot be found. Images cannot be played back.
• Select the recording media and image quality of the image you want to play back on the
VISUAL INDEX screen (p. 47).
• Image data cannot be played back if you have modified file names or folders, or have edited
the data on a computer (When viewing still images, the file name flashes). This is not a
• Images recorded on other devices may not be played back, or displayed in incorrect size. This
is not a malfunction.
Continued ,
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• Only the file name is displayed, if the folder structure does not conform to the universal
standard.
No sound or only a low sound is heard.
• Movies recorded using [SMOOTH SLOW REC] do not have sounds.
“---” is displayed on the screen.
• The recording media you are playing was recorded without setting the date and time.
• The recording media you are playing was recorded with [HYPER GAIN] set to [ON].
• Bars will be displayed for the camera data of the movies recorded with [SMOOTH SLOW
REC] or [COLOR BAR] set to [ON].
• Bars will be displayed for the exposure correction value and flash information of the still
images created with [PHOTO CAPTURE].
appears on the LCD screen.
• This appears when you play back movies recorded with 5.1ch surround sound. 5.1ch
surround sound is down-mixed to 2ch stereo and played back on your camcorder.
Connecting to TV
Neither image nor sound is played back on the TV connected with the
component video cable.
• When you are using the component video cable, make sure that you connect the red and white
Neither image nor sound is played back on the TV connected with the HDMI
cable.
• Images are not output from the HDMI OUT jack, if copyright protection signals are recorded
in the images.
Neither image nor sound is played back on the TV, projector, or AV amplifier
connected with the HDMI cable.
• If you cannot view images or hear sound on the TV, projector, or AV amplifier connected
with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your
camcorder again.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Neither image nor sound is played back on the TV or monitor connected with
the HDMI cable or a commercially available 75Ω (ohm) coaxial cable.
• Signals are not output from the HDMI OUT and SDI OUT jacks when the USB jack is
connected.
The image appears distorted on the 4:3 TV.
• This happens when viewing a movie recorded in 16:9 (wide) mode on a 4:3 TV. Select [REC/
OUT SET] t [VIDEO OUT] t [DOWN CONVERT TYPE] t the appropriate down
Black zone appears at top and bottom of a 4:3 TV screen.
• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is
not a malfunction.
Dubbing/Editing/Connecting to other devices
Time code and other information appear on the display of the connected
device.
• Set [DISPLAY OUTPUT] to [LCD PANEL] while connected with the A/V connecting cable
Dubbing cannot be done correctly using the A/V connecting cable.
• The A/V connecting cable is not connected properly. Make sure that the A/V connecting
cable is connected to the input jack of the other device for dubbing images from your
camcorder.
Sound cannot be added to the recording media after recording.
• You cannot add sound to the recording media after recording on your camcorder.
Dubbing cannot be done correctly using the HDMI cable.
• You cannot dub movies using the HDMI cable.
GPS (HXR-NX5E/NX5P)
The camcorder is not receiving a GPS signal.
• Your camcorder may not be able to receive radio signals from GPS satellites because of
obstructions. Bring your camcorder to an open area. For details on places where radio signals
do not reach, see page 105.
The triangulating location is different from the actual current location.
• If your camcorder receives the radio signal reflected by surrounding buildings, or weak radio
signals, the margin of error can be as wide as several-hundred meters, at a maximum.
Continued ,
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Connecting to a computer
The computer does not recognize the camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from the computer, restart the computer, then connect the computer to
your camcorder correctly.
Movies cannot be viewed or copied to a computer.
• Disconnect the cable from the computer, then connect it again.
• You need to install the supplied “Content Management Utility” to copy movies from your
The computer freezes.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicators and messages
Self-diagnosis display/Warning
indicators
(Warning indicator pertaining
to battery pack temperature)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility.
(Warning indicator
pertaining to memory cards)
Slow flashing
• Free spaces for recording images are
running out. For the type of memory
cards you can use with your camcorder,
see page 2.
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
Fast flashing
• There are not enough free spaces for
recording images. Delete unnecessary
C:06:ss
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
• The image database file may be
C:13:ss
• Remove the recording media. After
installing them again, operate your
camcorder.
(Warning indicators
pertaining to memory card
formatting)
• The memory card is damaged.
• The memory card is not formatted
C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
(Warning indicator
pertaining to incompatible memory
cards)
E:20:ss / E:61:ss / E:62:ss /
E:92:ss / E:94:ss / E:95:ss
• Incompatible memory card is inserted
(p. 2).
E (Battery level warning)
-
- (Warning indicator
• The battery pack is nearly used up.
pertaining to the write-protect of the
memory card)
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
• Access to the memory card was
restricted on another device.
Continued ,
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicators and messages (Continued)
(Warning indicator pertaining to
a flash memory unit)
Slow flashing
• Free spaces for recording images are
running out. For the flash memory unit
you can use with your camcorder, see
• No flash memory unit is attached
Fast flashing
• There are not enough free spaces for
recording images. delete unnecessary
• The image database file may be
(Warning indicators pertaining
to a flash memory unit formatting)
• The flash memory unit is damaged.
• The flash memory unit is not formatted
melody when the warning indicators appear on
the screen.
Warning messages
If messages appear on the screen, follow the
instructions.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Recording time of movies
Playing time
Approximate time available when you use a
fully charged battery pack.
(unit: minute)
Estimated time of recording and
playback with each battery pack
Recording time
Approximate time available when you use a
fully charged battery pack.
(unit: minute)
HXR-NX5E/
Battery pack
HXR-NX5M
NX5P
170
355
530
NP-F570
NP-F770
NP-F970
180
375
570
Continuous
recording
time
Typical
recording
time
Battery pack
b Notes
• Playing on the LCD screen with the LCD
backlight turned on
NP-F570
110
120
65
70
NP-F770
NP-F970
245
255
135
140
Estimated recording time of
movies
370
385
205
215
b Notes
• Top: HXR-NX5E/NX5P
Bottom: HXR-NX5M
High definition image quality (HD)
x When [
AUDIO FORMAT] is set to
[LINEAR PCM]
• Using ECM-XM1
(unit: minute)
• Typical recording time shows the time when
you repeat recording start/stop, zooming, and so
on.
• Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
AVCHD AVCHD AVCHD AVCHD
24 M
(FX)
17 M
(FH)
9 M
(HQ)
5 M
(LP)
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
4
6
10
15
(4)
(6)
(8)
(10)
10
10
20
35
(10)
(10)
(15)
(30)
20
25
45
70
(20)
(25)
(35)
(60)
40
55
95
150
(40)
(55)
(70)
(130)
85
110
(110)
190
300
(85)
(145)
(260)
170
225
385
605
(170)
(225)
(295)
(525)
Continued ,
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording time of movies (Continued)
• Your camcorder uses the VBR (Variable Bit
Rate) format to automatically adjust image
quality to suit the recording scene. This
technology causes fluctuations in the recording
time of the media. Movies containing quickly
moving and complex images are recorded at a
higher bit-rate, and this reduces the overall
recording time.
• Bit-rate (movie + audio, etc.), number of pixels,
and aspect ratio of each recording mode of
movies are as follows.
– High definition image quality (HD)
FX: max. 24 Mbps 1920 × 1080/16:9,
1280 × 720/16:9
x When [
AUDIO FORMAT] is set to
[DOLBY DIGITAL]
(unit: minute)
AVCHD AVCHD AVCHD AVCHD
24 M
(FX)
17 M
(FH)
9 M
(HQ)
5 M
(LP)
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
5
6
10
20
(5)
(6)
(9)
(15)
10
10
25
40
(10)
(10)
(15)
(35)
20
25
50
90
(20)
(25)
(40)
(75)
FH: approx. 17 Mbps (ave.) 1920 × 1080/
16:9, 1280 × 720/16:9
HQ: approx. 9 Mbps (ave.) 1440 × 1080/16:9
LP: approx. 5 Mbps (ave.) 1440 × 1080/16:9
45
55
105
185
(45)
(55)
(80)
(155)
90
115
215
375
– Standard definition image quality (SD)
HQ: approx. 9 Mbps (ave.) 720 × 576/16:9,
4:3
• Number of pixels and aspect ratio of still images
(Still images are created from movies.)
1920 × 1080 dots/16:9
(90)
(115)
(165)
(315)
180
235
435
750
(180)
(235)
(335)
(630)
Standard definition image quality
(SD)
640 × 360 dots/16:9
640 × 480 dots/4:3
(unit: minute)
SD 9 M (HQ)
10 (10)
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
25 (25)
55 (50)
115 (105)
235 (210)
475 (425)
b Notes
• The recordable time may vary depending on the
recording and subject conditions, [REC SET]
• The number in ( ) is the minimum recordable
time.
z Tips
• You can record movies of a maximum of 3,999
scenes with high definition image quality (HD),
and 9,999 scenes with standard definition image
quality (SD).
• The maximum continuous recording time of
movies is approximately 13 hours.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your camcorder abroad
Power supply
System
Used in
You can use your camcorder in any
country/region using the AC Adaptor/
Charger supplied with your camcorder
within the AC 100 V to 240 V, 50 Hz/
60 Hz range.
PAL - N Argentina, Paraguay, Uruguay.
SECAM Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
NTSC
Bahama Islands, Bolivia,
Canada, Central America, Chile,
Colombia, Ecuador, Guyana,
Jamaica, Japan, Korea, Mexico,
Peru, Surinam, Taiwan,
Viewing high definition image quality
(HD) movies
In countries/regions where 1080/50i is
supported, you can view the movies with
the same high definition image quality
(HD) as that of the recorded movies.
You need a PAL-system-based and 1080/
50i compatible TV (or monitor) with
component and AUDIO/VIDEO input
jacks. The component video cable
(supplied) or an HDMI cable (sold
separately) must be connected.
the Philippines, the U.S.A.,
Venezuela, etc.
Simple setting of the clock by time
difference
When you are abroad, you can easily adjust
the clock to the local time by setting the
time difference. Select [AREA SET], then
Viewing standard definition image
quality (SD) movies
To view standard definition image quality
(SD) movies, you need a PAL-system-
based TV with AUDIO/VIDEO input jacks.
An A/V connecting cable must be
connected.
On TV color systems
Your camcorder is PAL system, so its
picture can only be viewed on a PAL-
system TV with AUDIO/VIDEO input
jacks.
System
Used in
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia,
New Zealand, Norway, Poland,
Portugal, Singapore,
Slovak Republic, Spain,
Sweden, Switzerland, Thailand,
United Kingdom, etc.
PAL - M Brazil
103
Download from Www.Somanuals.com. All Manuals Search And Download.
File/folder structure on the memory card and
the flash memory unit
The file/folder structure is shown below. You do not usually need to acknowledge the file/
folder structure, when recording/playing back movies and still images on the camcorder.
* “Memory Stick PRO Duo” media, flash
memory unit
**SD memory card, SDHC memory card, SDXC
memory card
the capacity of a file number exceeds
9999, another folder is created to store
new still image files.
The folder name goes up: [101MSDCF]
t [102MSDCF]
• By pressing the MODE button, then selecting
A Image management files
When you delete the files, you cannot
record/play back the images correctly.
The files are defaulted as hidden files
and not usually displayed.
[MANAGE MEDIA] t [USB CONNECT] t
[
]/[
], you can access the memory card
from the computer through USB connection.
• Do not modify the files or folders on the
camcorder from the computer. The image files
may be destroyed or may not be played back.
• Operation is not guaranteed, if you perform the
above operation.
• When you delete image files, follow the steps on
page 62. Do not delete the image files on the
camcorder directly from the computer.
• Do not format the recording media using a
computer. The camcorder may not operate
correctly.
• Do not copy the files on the recording media
from the computer. Operation is not guaranteed.
• Use the supplied application software “Content
Management Utility” to input data from the
recording media to a computer.
B HD movie management information
folder
This folder contains recording data of
high definition image quality (HD)
movies. Do not try to open this folder or
access the contents of this folder from a
computer. Doing so might damage
image files, or prevent image files from
being played back.
C SD movie files (MPEG-2 files)
The extension of the files is “.MPG”.
The maximum size is 2 GB. When the
capacity of a file exceeds 2 GB, the file
becomes divided.
The file numbers go up automatically.
When the capacity of a file number
exceeds 9999, another folder is created
to record new movie files. The folder
name goes up: [101PNV01] t
[102PNV01]
D Still image files (JPEG files)
The extension of the files is “.JPG”. The
file numbers go up automatically. When
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions
About the AVCHD format
What is the AVCHD format?
The AVCHD format is a high definition
digital video camera format used to record a
high definition (HD) signal, using efficient
data compression coding technology. The
MPEG-4 AVC/H.264 format is adopted to
compress video data, and the Dolby Digital
or Linear PCM system is used to compress
audio data.
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
• Because the AVCHD format uses a data
compression system, images may be distorted in
scenes where the image, angle, or brightness
changes drastically. This is not a malfunction.
About GPS (HXR-NX5E/NX5P)
The GPS (Global Positioning System) is a
system that calculates geographical location
from highly accurate US space satellites.
The GPS satellites are located in 6 orbits,
20,000 km above the earth. The GPS
system consists of 24 or more GPS
satellites. A GPS receiver receives radio
signals from the satellites, and calculates
the current location of the receiver based on
the orbital information (almanac data) and
travel time of the signals, etc.
Determining a location is called
“triangulating.” A GPS receiver can
determine the location’s latitude and
longitude by receiving signals from 3 or
more satellites.
b Notes
• As the positions of GPS satellites vary
constantly, it may take longer to determine the
location or the receiver may not be able to
determine the location at all, depending on the
location and time you use the camcorder.
• “GPS” is a system for determining geographic
location by triangulating radio signals from GPS
satellites. Avoid using the camcorder in places
where radio signals are blocked or reflected,
such as a shadowy place surrounded by
buildings or trees, etc. Use the camcorder in
open sky environments.
• You may not be able to record location
information at locations or in situations where
radio signals from the GPS satellites do not
reach the camcorder as follows.
– In tunnels, indoors or under the shade of
buildings.
Recording and playback on your
camcorder
Based on the AVCHD format, your
camcorder records with the high definition
image quality (HD). In addition to high
definition image quality (HD), your
camcorder is capable of recording a
standard definition (SD) signal in the
conventional MPEG2 format.
Video signal*: MPEG-4 AVC/H.264
1920 ×1080/50i, 1280 ×720/50p,
1440 × 1080/50i
Audio signal: Dolby Digital 2ch, Linear
PCM 2 ch
Recording media: memory card, flash
memory unit (sold separately)
* Data recorded in AVCHD format other than the
above mentioned cannot be played back on your
camcorder.
– Between tall buildings or at narrow streets
surrounded by buildings.
– In underground locations, locations
surrounded by dense trees, under an elevated
bridge, or in locations where magnetic fields
are generated, such as near high voltage
cables.
– Near devices that generate radio signals of the
same frequency band as the camcorder: near
1.5 GHz band mobile telephones, etc.
• 1080i specification
A high definition specification which utilizes
1,080 effective scanning lines and the interlace
system.
• 720p specification
A high definition specification which utilizes
720 effective scanning lines and the progressive
system.
Continued ,
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
On triangulating errors
About the memory card
• A memory card formatted by a computer
(Windows OS/Mac OS) does not have
• If you move to another location right after
setting the GPS switch to ON, it may take
a longer time for the camcorder to start
triangulating, compared to when you stay
in the same place.
guaranteed compatibility with your camcorder.
• Data read/write speed may vary depending on
the combination of the memory card and
memory card compliant product you use.
• Damaged or lost image data will not be
compensated for, and may occur in the
following cases:
– If you eject the memory card, turn the power
off on your camcorder, or remove the battery
pack for replacement while your camcorder is
reading or writing image files on the memory
card (while the access lamp is lit or flashing).
– If you use the memory card near magnets or
magnetic fields.
• It is recommended to make a back-up of
important data on the hard disk of a computer.
• Be careful not to apply excessive force when
writing on a memo area on memory card.
• Error caused by the position of GPS
satellites
The camcorder automatically triangulates
your current location when the camcorder
receives radio signals from 3 or more GPS
satellites. The triangulating error allowed
by the GPS satellites is about 10 m
( 32 feet). Depending on the environment
of the location, the triangulating error can
be greater. In this case, your actual
location may not match the location on the
map based on the GPS information.
Meanwhile, the GPS satellites are
controlled by the Unites States
Department of Defense, and the degree of
accuracy may be changed intentionally.
• Do not attach a label or the like on memory card
or a memory card adaptor.
• Do not touch, or allow metallic objects to come
into contact with the terminals.
• Do not bend, drop or apply strong force to the
memory card.
• Do not disassemble or modify the memory card.
• Do not let the memory card get wet.
• Be careful to keep memory card out of the reach
of small children. There is danger that a child
might swallow it.
• Do not insert anything other than the compliant
size of memory card into the memory card slot.
Doing so may cause a malfunction.
• Do not use or keep the memory card in the
following locations:
• Error during the triangulating process
The camcorder acquires location
information every second during
triangulating.
On the restriction of use of GPS on an
airplane
During take off and landing of an airplane,
set the GPS switch to OFF and turn off the
camcorder, as you will be instructed to do
by the on-board announcement. In other
cases, use GPS in accordance with the
regulations of the place or situation.
– Places subject to extremely high temperature,
such as a car parked outside in the summer.
– Places under direct sunlight.
– Places with extremely high humidity or
subject to corrosive gases.
On the geographic coordinate system
The “WGS-84” geographic coordinate
system is used.
x On the memory card adaptor
• When inserting memory card into a memory
card adaptor, make sure the memory card is
inserted facing in the correct direction, then
insert it all the way in. Note that improper use
may cause a malfunction.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
On image data compatibility
About the “InfoLITHIUM”
battery pack
• Image data files recorded on a memory card by
your camcorder conform to the “Design rule for
Camera File system” universal standard
established by the JEITA (Japan Electronics and
Information Technology Industries
This unit is compatible with an
“InfoLITHIUM” battery pack (L series).
Your camcorder operates only with an
“InfoLITHIUM” battery pack.
Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use memory card that has been
used with another device, format it with your
all information on the memory card.
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
“InfoLITHIUM” L series battery packs
have the
mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and a supplied AC Adaptor/
Charger.
– When playing back image data recorded with
other devices.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/Charger, the
remaining battery time and charging time
appear.
About the “Memory Stick” media
Recording
Types of “Memory Stick” media
/Playback
“Memory Stick Duo” media
(with MagicGate)
_
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the charge lamp of the AC
Adaptor/Charger turns off. If you charge the
battery pack outside of this temperature range,
you may not be able to charge it efficiently.
“Memory Stick PRO Duo”
(Mark2) media
a
a*
“Memory Stick PRO-HG Duo”
media
* This product does not support 8-bit parallel data
transfer but it supports 4-bit parallel data
transfer the same as with “Memory Stick PRO
Duo” media.
• This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
To use the battery pack effectively
• Battery pack performance decreases when the
ambient temperature is 10 °C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one of the
following to use the battery pack for a longer
time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-F770/
F970 (sold separately).
Continued ,
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
• Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
We recommend using a large capacity battery
pack: NP-F770/F970 (sold separately).
• Be sure to set the POWER switch to OFF when
not recording or playing back on your
camcorder. The battery pack is also consumed
when your camcorder is in recording standby or
playback pause.
• Have spare battery packs ready for two or three
times the expected recording time, and make
trial recordings before making the actual
recording.
About battery life
• Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
• Each battery’s life is governed by storage,
operating and environmental conditions.
About charging the battery pack
• Use the AC Adaptor/Charger (supplied) to
charge the designated batteries only. If you
charge other types of batteries, those batteries
may leak, heat up, burst, or give an electric
shock, resulting in burns or injury.
• Remove the charged battery from the AC
Adaptor/Charger.
• The CHARGE lamp of the supplied AC
Adaptor/Charger flashes in 2 patterns as
follows:
Fast-flashing...Turns on and off rapidly at about
0.15-second intervals.
Slow-flashing...Turns on and off alternately for
about 1.5 seconds, and turns off completely for
about 1.5 seconds. The lamp repeats this
sequence.
• If the CHARGE lamp is fast-flashing, remove
the battery that is being charged, and then re-
attach the same battery again firmly. If the
CHARGE lamp continues fast-flashing, the
cause could be that the battery is damaged, or
the battery is not a designated type. Check the
battery to confirm whether it is a designated
type or not. If it is a designated type, remove the
battery first, and then attach a brand-new battery
or another known-to-be-good battery to see if
the AC Adaptor/Charger is working correctly. If
the AC Adaptor/Charger is working correctly,
the cause could be that the battery is damaged.
• Do not expose the battery pack to water. The
battery pack is not water resistant.
About the remaining battery time
indicator
• When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
• The E mark that indicates low battery flashes
even if there are still 5 to 10 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
• If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
• To discharge the battery pack on your
camcorder completely, leave your camcorder in
recording standby until the power goes off
• If the CHARGE lamp is slow-flashing, the AC
Adaptor/Charger is in standby mode and
charging is suspended. When the ambient
temperature is out of the appropriate
temperature range for charging, the AC
Adaptor/Charger suspends charging
automatically and enters standby mode. When
the ambient temperature returns to an
appropriate temperature, the AC Adaptor/
Charger restarts charging and the CHARGE
lamp lights up. We recommend charging the
battery pack in an ambient temperature of
between 10 °C to 30 °C (50 °F to 86 °F).
108
Download from Www.Somanuals.com. All Manuals Search And Download.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
• Do not use a deformed or damaged battery pack.
• Keep the POWER switch setting to OFF when
you are not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
About x.v.Color
• x.v.Color is a more familiar term for the
xvYCC standard proposed by Sony, and is
a trademark of Sony.
• xvYCC is an international standard for
color space in video. This standard can
express a wider color range than the
currently used broadcast standard.
• When disconnecting the power cord (mains
lead), pull it by the plug and not the lead.
• Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
About handling of your
camcorder
• Keep metal contacts clean.
On use and care
• Do not use or store the camcorder and
accessories in the following locations.
– Anywhere extremely hot or cold. Never leave
them exposed to temperatures above 60 °C
(140 °F), such as under direct sunlight, near
heaters or in a car parked in the sun. They
may malfunction or become deformed.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– Near AM receivers and video equipment.
Noise may occur.
• Keep the Wireless Remote Commander and
button-type battery out of children’s reach. If
the battery is accidentally swallowed, consult a
doctor immediately.
• If the battery electrolytic liquid has leaked,
– consult your local authorized Sony service
facility.
– wash off any liquid that may have contacted
your skin.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
x When not using your camcorder for a
long time
• Turn on the camcorder and record and play back
images about once a month to keep it in an
optimum state for a long time.
• Use up the battery pack completely before
storing it.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen, the viewfinder, or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
– Anywhere very humid.
• Operate your camcorder on DC 7.2 V (battery
pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories
recommended in these operating instructions.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder and cause
a malfunction of your camcorder.
x If moisture condensation has occurred
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
Leave your camcorder for about 1 hour without
turning it on.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
Continued ,
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
x Note on moisture condensation
2 Press the MENU button t select
(OTHERS) t [CALIBRATION]
Moisture may condense when you bring your
camcorder from a cold place into a warm place (or
vice versa) or when you use your camcorder in a
humid place as shown below.
with the SEL/PUSH EXEC dial.
• When you bring your camcorder from a ski
slope into a place warmed up by a heating
device.
• When you bring your camcorder from an air
conditioned car or room into a hot place outside.
• When you use your camcorder after a squall or a
shower.
• When you use your camcorder in a hot and
humid place.
3 Touch “×” displayed on the screen with
the corner of memory card or the like 3
times.
• If you did not press the right spot, try the
calibration again.
• Touch [CANCEL] to cancel calibration.
x How to avoid moisture condensation
When you bring your camcorder from a cold place
into a warm place, put your camcorder in a plastic
bag and seal it tightly. Remove the bag when the
air temperature inside the plastic bag has reached
the ambient temperature (after about 1 hour).
b Notes
• Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
LCD screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
On handling the casing
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
• Avoid the following to avoid damage to the
finish.
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
– Handling with above substances on your
hands.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
x To clean the LCD screen
If fingerprints or dust make the LCD screen dirty,
it is recommended you use a soft cloth to clean it.
When you use the LCD Cleaning Kit (sold
separately), do not apply the cleaning liquid
directly to the LCD screen. Use cleaning paper
moistened with the liquid.
About care and storage of the lens
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
surface.
On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly. If this happens, follow the
procedure below. It is recommended that
you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor/Charger during the operation.
– In hot or humid locations
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above.
1 Turn on the camcorder.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
On charging the pre-installed
rechargeable battery
Removing dust from inside the
viewfinder
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF. The pre-installed
rechargeable battery is always charged
while your camcorder is connected to the
wall outlet (wall socket) via the AC
Adaptor/Charger or while the battery pack
is attached. The rechargeable battery will be
fully discharged in about 3 months if you
do not use your camcorder at all without the
AC Adaptor/Charger connected or the
battery pack attached. Use your camcorder
after charging the pre-installed
1
Remove the eye piece of the
viewfinder.
Slide down the viewfinder release lever
and hold it at the position (1), then lift
the eye piece of the viewfinder as
indicated with the arrow in the
illustration (2).
rechargeable battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
Connect your camcorder to a wall outlet
(wall socket) using the supplied AC
Adaptor/Charger, and leave it with the
POWER switch set to OFF for more than
24 hours.
2
Remove dust inside the eye piece
and viewfinder with a blower.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
f=4.1 - 82.0 mm (3/16 - 3 1/4 in.)
When converted to a 35 mm still
camera*
29.5 - 590 mm (1 3/16 - 23 1/4 in.)
(16:9),
36.1 - 722 mm (1 7/16 - 28 1/2 in.)
(4:3)
F1.6 - 3.4
System
Video signal
PAL color, CCIR standards
HDTV 1080/50i, 720/50p
Video recording system
HD image quality: MPEG-4 AVC/
H.264 AVCHD
SD image quality: MPEG-2 PS
Audio recording system
Linear PCM 2ch (48 kHz 16-bit)
Dolby Digital 2ch (48 kHz 16-bit)
Dolby Digital Stereo Creator employed
Still image recording system
DCF Ver. 2.0
Filter diameter: 72 mm (2 7/8 in.)
Color temperature
[AUTO]
(one push) A/B
[INDOOR] (3 200K)
[OUTDOOR] (5 800K 7 offset levels)
[MANU WB TEMP] (2 300K -
15 000K in 100K steps)
Minimum illumination
1.5 lx (lux) (Fixed Shutter Speed 1/25,
auto gain, auto iris) (F 1.6)
Exif Ver. 2.21
MPF Baseline
Recording media (movies/still images)
“Memory Stick PRO Duo” media
Flash memory units
SD card (Class 4 or faster)
Viewfinder
* When [SET] of [STEADYSHOT] is set to
[STEADYSHOT] or [OFF]
Electric viewfinder (color, black and
white)
Output connectors
VIDEO OUT jack
Picture: 1.1 cm (0.45 type, aspect ratio
16:9)
Pin connector
1 Vp-p, 75 Ω (ohms) unbalanced, sync
negative
AUDIO OUT jacks
Pin connectors
Total dot number:
1 226 880 (approx. 852 × 3 [RGB] ×
480)
Image device
-10 dBu (at load impedance 47 kΩ
(kilohms)), Output impedance with less
than 2.2 kΩ (kilohms)
(0 dBu = 0.775 Vrms)
COMPONENT OUT jack
Mini-D jack
Y: 1 Vp-p, 75 Ω (ohms)
PB/PR, CB/CR: 0.7 Vp-p, 75 Ω (ohms)
HDMI OUT jack
6.0 mm (1/3 type) 3CMOS sensor
Gross: Approx. 1 120 000 pixels
Effective (movie, 16:9):
Approx. 1 040 000 pixels*
Effective (movie, 4:3):
Approx. 780 000 pixels*
Lens
G Lens
20 × (Optical), Approx. 30 × (Digital,
when [D.EXTENDER] is set to [ON])
Focal length
HDMI connector
SDI OUT jack
BNC
SMPTE292M/259M
112
Download from Www.Somanuals.com. All Manuals Search And Download.
i (headphones) jack
During camera recording using the
microphone ECM-XM1 and LCD with
normal brightness:
Stereo-minijack (Ø 3.5 mm)
Input connectors
7.7 W
HXR-NX5M
INPUT1/INPUT2 jacks
During camera recording using the
microphone ECM-XM1 and viewfinder
with normal brightness:
7.4 W
During camera recording using the
microphone ECM-XM1 and LCD with
normal brightness:
XLR 3-pin, female,
MIC: -48 dBu: 3 kΩ (kilohms)
(Variable in the range of between
-60 dBu and -30 dBu in 6 dBu step by
the INPUT TRIM function)
LINE: +4 dBu: 10 kΩ (kilohms)
(0 dBu = 0.775 Vrms)
7.4 W
Input/Output connectors
USB jack
* When Flash Memory Unit HXR-FMU128 is
used, the average power consumption increases
about 1.1 W.
mini-B
Remote jack
Operating temperature
Stereo mini-minijack (Ø 2.5 mm)
TC LINK IN/OUT jack
Pin connector
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
IN: 0.5 V to 18 Vp-p, 10 kΩ (kilohms)
OUT: 1.2 Vp-p, 75 Ω (ohms)
(IN/OUT switch-able)
173 × 193 × 449 mm
(6 7/8 × 7 5/8 × 17 3/4 in.) (w/h/d)
including the projecting parts
173 × 193 × 449 mm
LCD screen
Picture
(6 7/8 × 7 5/8 × 17 3/4 in.) (w/h/d)
including the projecting parts with the
battery pack (NP-F570)
8.0 cm (3.2 type, aspect ratio 16:9)
Total dot number
921 600 (1 920 × 480)
Mass (approx.)
2.2 kg (4 lb 15 oz) including the lens
hood with lens cover
General
2.5 kg (5 lb 7 oz) including the battery
pack (NP-F570), lens hood with lens
cover and microphone (ECM-XM1)
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor/Charger)
Average power consumption*
HXR-NX5E/NX5P
AC Adaptor/Charger AC-VL1
During camera recording using the
microphone ECM-XM1 and viewfinder
with normal brightness:
7.7 W
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Power consumption
22 W
Output voltage
DC 8.4 V*
Continued ,
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
On trademarks
• “NXCAM” logo is a trademark of Sony
Corporation.
• “AVCHD” and “AVCHD” logotype are
trademarks of Panasonic Corporation and Sony
Corporation.
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
136 × 51 × 90 mm
• “Memory Stick ,” “
Duo,” “
PRO Duo,” “
,” “Memory Stick
,” “Memory Stick
,”
(5 3/8 × 2 1/8 × 3 5/8 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
270 g (9.6 oz) excluding the power cord
(mains lead)
* See the label on the AC Adaptor/Charger for
“Memory Stick PRO-HG Duo,”
“
“
,” “MagicGate,”
,” “MagicGate Memory
Stick” and “MagicGate Memory Stick Duo” are
trademarks of Sony Corporation.
other specifications.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
Rechargeable battery pack NP-F570
•
is a trademark of Sony Corporation.
• “x.v.Colour” is a trademark of Sony
Corporation.
• Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
• Microsoft, Windows, and Windows Vista are
trademarks or registered trademarks of U.S.
Microsoft Corporation in the U.S. and other
countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Maximum charge voltage
DC 8.4 V
Maximum charge current
3.0 A
Capacity
Typical: 15.8 Wh (2 200 mAh)
Minimum: 15.0 Wh (2 100 mAh)
Type
• HDMI, HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
Li-ion
Design and specifications are subject to change
without notice.
• Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United
States and/or other countries.
• Manufactured under license from Dolby
Laboratories.
• SDXC and SDHC logos are trademarks of
SD-3C, LLC.
• MultiMedia Card is a trademark of
MultiMediaCard Association.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®”
are not mentioned in each case in this manual.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the License
On GNU GPL/LGPL applied software
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. Use the
following URL to download it. When
downloading the source code, select HXR-NX5J
as the model for your camcorder.
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND
http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM “Content Management Utility.” You
will find licenses (in English) of “GPL,” and
“LGPL” software.
/OR
(ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND
To view the PDF, Adobe Reader is needed. If it is
not installed on your computer, you can download
it from the Adobe Systems web page:
NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC
VIDEO.
http://www.adobe.com/
NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE <HTTP://WWW.MPEGLA.COM>
“C Library,” “Expat,” “zlib,” “libjpeg,” “dtoa”
and “pcre” software are provided in your
camcorder. We provide this software based on
license agreements with their owners of
copyright. Based on requests
by the owners of copyright of these software
applications, we have an obligation to inform you
of the following. Please read the following
sections.
Read “license1.pdf” in the “License” folder on the
CD-ROM “Content Management Utility.” You
will find licenses (in English) of “C Library,”
“Expat,” “zlib,” “libjpeg,” “dtoa” and “pcre”
software.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
QIduicek Rnetfeirefnyceing parts and controls
The numbers in ( ) are reference pages.
B ASSIGN 7/EXPANDED FOCUS
G Accessory shoe
C Accessory shoe mount
plate and remove it from the accessory
shoe.
To mount the accessory shoe
Mount the accessory shoe on the accessory
shoe mount as illustrated.
2 Place the accessory shoe as its
protrusions matches recesses of the
accessory shoe mount, then fix it to the
mount with four screws.
Accessory shoe plate
3 Insert the accessory shoe plate in the
direction of the arrow on the plate
surface until the end of the plate
engages the end of the shoe.
Accessory shoe
Accessory shoe
To remove the accessory shoe
Remove the shoe plate in the same way as
Loosen the 4 screws and remove the
accessory shoe from the accessory shoe
mount.
Accessory shoe plate
1 Lift the edge of the accessory shoe plate
and pull it in the direction opposite to
that of the arrow on the accessory shoe
116
Download from Www.Somanuals.com. All Manuals Search And Download.
* The ASSIGN 5/AE SHIFT button and the
ASSIGN 2 button have raised tactile dots for
your convenience in locating the button.
The recording lamp flashes if the
remaining capacity of recording media
or battery is low.
H ASSIGN 6/VISUAL INDEX button
(45)
N CH2 (INT MIC/INPUT1/INPUT2)
switch (39)
Continued ,
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying parts and controls (Continued)
A VIDEO OUT jack/AUDIO OUT jacks
(54)
For attaching a flash memory unit (sold
separately).
Flash memory unit jack
D
USB jack (88)
Provided for securing a microphone
cable, etc.
Flash memory unit jack cover
When it is set to ON, the camcorder
acquires the GPS information (location
and time of recording) and records with
images.
N REMOTE jack
The REMOTE jack is used for
controlling playback, etc. on the video
device and peripherals connected to it.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
A Hook for shoulder strap
To attach a shoulder strap
Attach a shoulder strap (sold separately) to
the hooks for a shoulder strap.
J i (headphones) jack
For stereo mini-jack headphones
M Memory card B slot/select button/access
lamp (19)
N Memory card A slot/select button/
O
(One push) button (31)
* WHT BAL button has a raised tactile dot for
your convenience in locating the button.
Continued ,
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying parts and controls (Continued)
A RESET button
If you press the RESET button, all
settings including the clock setting
(except the picture profile settings)
return to the default.
67)
T TC/U-BIT button
Switches between time code and user bit
to display on the LCD screen.
C Playback control buttons (PREV/
PLAY*/NEXT/STOP/PAUSE/SCAN/
* PICTURE PROFILE button, VOLUME+
button, MENU button, and PLAY button have
raised tactile dots for your convenience in
locating the buttons.
**MENU button has a raised tactile bar for your
convenience in locating the button.
The recording lamp flashes if the
remaining capacity of recording media
or battery is low.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
• When you are operating with the Wireless
Remote Commander supplied with your
camcorder, your video device may also operate.
In that case, select a commander mode other
than DVD2 for your video device, or cover the
sensor of your video device with black paper.
Wireless Remote Commander
Remove the insulation sheet before using
the Wireless Remote Commander.
Insulation sheet
To change the battery of the Wireless
Remote Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the
Wireless Remote Commander until it
clicks.
Tab
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
• When the lithium battery becomes weak, the
operating distance of the Wireless Remote
Commander may shorten, or the Wireless
Remote Commander may not function properly.
In this case, replace the battery with a Sony
CR2025 lithium battery. Use of another battery
may present a risk of fire or explosion.
H Transmitter
M b/B/v/V/ENTER buttons
b Notes
• Aim the Wireless Remote Commander towards
the remote sensor to operate your camcorder.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen indicators
Indicator
Meaning
Center
Upper right
LCD backlight off (15)
Upper left
BLACK FADER
Bottom
Indicator
Meaning
Bottom
Upper left
D.EXTENDER (75)
x.v.Color (75)
Indicator
Meaning
t 60min
Remaining battery
/
9
Manual focus (27)
Picture profile (32)
WIDE REC (77)
~
GPS triangulating status
(41)
.
Center
9dB
50
Indicator
Meaning
Shutter speed (29)
Recording media
Manual volume control
(40)
Relay recording (22)
AUDIO FORMAT
STBY REC
Recording status (21)
Warning (99)
(78)
E
N
Playback indicator (47)
Auto setting (82)
White balance (30)
n
B
A
Upper right
Indicator
Meaning
z Tips
0min
Estimated remaining
recording time
• Indicators may look different or appear at
different positions.
• Some indicators may not appear, depending on
your camcorder model.
Recording/playback
media
00:00:00:00
TC IN
Time code
(hour:minute:second:
frame)
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
C
EXPANDED FOCUS TYPE
EXPANDEDFOCUS/ASSIGN
F
CH1 (INT MIC/INPUT1)
CH2 (INT MIC/INPUT1/
AE SHIFT/ASSIGN 5 button
Connect
AUDIO LEVEL DISPLAY
G
AUDIO LEVEL (CH1/CH2)
D
AUTO/MAN (CH1/CH2)
B
H
BATT RELEASE (battery
DOWN CONVERT TYPE
E
Button-type lithium battery
124
Download from Www.Somanuals.com. All Manuals Search And Download.
O
I
M
“InfoLITHIUM” battery pack
P
“Memory Stick Duo” media
PICTURE PROFILE button
“Memory Stick PRO Duo”
Pre-installed rechargeable
PUSH (lens hood release)
K
R
L
N
Continued ,
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (Continued)
T
White balance memory switch
REPAIR IMAGE DB FILE
Wireless Remote Commander
S
X
U
SDI/HDMI/COMPONENT
Z
Using your camcorder abroad
SHUTTER SPEED button
V
Viewfinder lens adjustment
VISUAL INDEX/ASSIGN 6
W
126
Download from Www.Somanuals.com. All Manuals Search And Download.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
http://www.sony.net/
Printed on 70% or more recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil
based ink.
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|