4-080-199-11 (1)
Projection TV
Operating Instructions
KP-57XBR10W
KP-65XBR10W
© 2000 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
• Reorient or relocate the receiving antennas.
CAUTION
WARNING
When using TV games, computers, and similar products
with your projection TV, keep the brightness and contrast
functions at low settings. If a fixed (non-moving) pattern is
left on the screen for long periods of time especially at a
high brightness or contrast setting, the image can be
permanently imprinted onto the screen. These types of
imprints are not covered by your warranty because they
are the result of misuse.
• Increase the separation between the equipment and
receiver.
To prevent fire or shock
hazard, do not expose the TV
to rain or moisture.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
CAUTION
Note on Caption Vision
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This television receiver provides display of television
closed captioning in accordance with §15.119 of the FCC
rules.
This document is for the remote control RM-Y907
MODELS: KP-57XBR10W, KP-65XBR10W
ATTENTION
Note on convergence adjustment
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
Before you use your projection TV, make sure to adjust
convergence. For details, see on page 25.
Please keep this notice with the instruction manual.
PRECAUCION
Note to CATV system installer
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
As an ENERGY STAR Partner, Sony
Corporation has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
(
)
DO NOT REMOVE COVER OR BACK .
ATTENTION
NO USER-SERVICEABLE PARTS INSIDE.
Use of this television receiver for other than private viewing
of programs broadcast on UHF or VHF or transmitted by
cable companies for the use of the general public may
require authorization from the broadcaster/cable company
and/or program owner.
Pour prévenir les chocs électriques, ne pas utiliser cette
fiche polarisée avec un prolongateur, une prise de courant
ou une autre sortie de courant, sauf si les lames peuvent
tre inserées à fond sans en laisser aucune partie à
decouvert.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
NOTIFICATION
This equipment has been tested and found to comply with
the limits for a Class B digital device pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference with radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
Owner’s Record
The model and serial numbers are located at the rear of
the projection TV, below the Sony logo, on the sticker, and
also on the TV box (white label). Record these numbers in
the spaces provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Model No.
Serial No.
CAUTION
To prevent electric shock, do not use this polarized AC
plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade
exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
MUTING
Getting to know the
buttons on the remote
control
Names of the buttons on the remote
control are presented in different
colors to represent the available
functions.
POWER
Remote Control
follow, we will refer to
the buttons on your remote control.
Keep this flap unfolded and use this page for
reference.
(pages 26, 56)
POWER
FUNCTION
(pages 26, 56)
DVD/
SAT/
MUTING
TV
TV
VCR CABLE
DISPLAY
DISPLAY
(page 27)
FUNCTION
DVD/VCR SAT/CABLE
TV/SAT/
PICTURE
MODE
OFF
FREEZE
PIP/P&P/
CHANNEL INDEX
(pages 30 - 34)
Button color
Black:Press to select the
AUDIO SWAP POSITION
ZOOM IN
For a detailed explanation of most buttons, see
“Watching the TV” on page 26.
LEFT
RIGHT
TV/SAT GUIDE
CC
ACTIVE
(page 36)
component you want to control;
e.g. VCR/MDP/DVD Player,
SAT/CABLE, or projection TV.
PICTURE
MODE
GUIDE/[CC]
TV/VIDEO
WIDE MODE
TV/VIDEO
ANT
(pages 27, 56)
(page 27)
ANT
(page 26)
WIDE MODE
1
4
2
5
8
3
6
9
Green:Buttons relevant to power
operations, like turning the
projection TV, SAT/CABLE, or
VCR/MDP/DVD Player on or
off
(page 29)
0-9 buttons
(page 26)
SLEEP
(page 27)
7
JUMP
(page 26)
ENTER
JUMP
POWER
0
ENTER
(pages 26, 54)
DVD/
SAT/
MUTING
TV
DISPLAY VCR CABLE
AV1/2/3/
DVD/MDP
switch
MENU
(page 36)
Label color
White:TV/VCR/MDP/DVD
Player/SAT/CABLE operation
buttons
MENU
VOL
CH
FUNCTION
AV 1 2 3 DVD/MDP
DVD/VCR SAT/CABLE
TV
(page 54)
VOL +/–
(page 26)
CH +/–
(page 26)
SLEEP
VCR/DVD/
MDP
operation
buttons
(page 55)
TV/VCR
REC DVD MENU
TITLE
Yellow:PIP, P&P, and CHANNEL
INDEX operation buttons
CODE SET
RESET
MTS
RESET
(pages 37, 38)
Joystick
(page 23)
Blue:SAT operation buttons
WIDE MODE
TV/VIDEO
ANT
Pink:DVD Player operation
buttons
CODE SET
(pages 54,
56)
1
4
7
2
5
8
3
6
9
TV
MTS
(page 37)
Download from Www.Somanuals.com. All Manuals Search And Download.
• MID (Multi Image Driver), a newly developed
device, allowing you to enjoy the following features
and, at the same time, to use your projection TV
easily. (not available for input from the VIDEO 5
(DTV) IN jacks)
Activating the PARENTAL CONTROL
feature . . . . . . . . . . . . . . . . . . . . . . 47
Before You Begin
Selecting a Custom Rating . . . . . . . . 49
Changing the Password . . . . . . . . . . . 51
What the Ratings Mean . . . . . . . . . . . . . . . . 52
Welcome!
— Picture & Picture (P&P) with zoom-in function
(Twin View™)
— Picture-in-Picture (PIP)
— CHANNEL INDEX, allowing you to view and
choose from twelve programs
— FAVORITE CHANNEL, allowing you to view
and choose from eight of your favorite channels
• FLASH FOCUS, allowing you to adjust
convergence automatically.
Thank you for purchasing the Sony Projection TV.
This manual is for models KP-57XBR10W and
KP-65XBR10W.
Additional Operations
Operating Video Equipment. . . . . . . . . . . . . 54
Setting the Manufacturer’s Code . . . 54
Operating video equipment . . . . . . . . 55
Model KP-57XBR10W is used for illustration
purposes.
The features you will enjoy include:
• “1080i Capable,” enabling you to receive the 1080i,
the VIDEO 5 (DTV) IN jacks, you can connect a
DTV (digital television) receiver to view DTV
programs.
Operating a Cable Box or Satellite Receiver
• Two Y/PB/PR inputs for DVD Player connection
(480p format capability is on the VIDEO 5 (DTV)
IN jacks).
Setting the Manufacturer’s Code . . . 56
Operating a cable box or satellite
• Four AUDIO/VIDEO/S VIDEO inputs.
receiver . . . . . . . . . . . . . . . . . . . . . 56
The VIDEO 5 (DTV) IN jacks also function as R/
G/B connectors with SYNC signal (HD/VD), but
are not compatible with a computer’s 5BNC video
output connectors.
Additional Information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 57
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 60
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
• WIDE SCREEN MODE, allowing you to watch 4:3
normal broadcasts in wide screen mode (16:9 aspect
ratio).
• AUTO WIDE, allowing you to select the wide
screen mode automatically.
• PARENTAL CONTROL, enabling you to block
programs that are unsuitable for your children.
• DRC (Digital Reality Creation), a technology
unique to Sony, allowing you to obtain a finer, more
detailed picture with four-times higher density than
the conventional NTSC picture. (not available for
input from the VIDEO 5 (DTV) IN jacks)
* Manufactured under license from Dolby Laboratories
Licensing Corporation. Additionally licensed under
Canadian patent number 1,037,877. “Dolby,” the double-D
symbol ; and “Pro Logic” are trademarks of Dolby
Laboratories Licensing Corporation
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing
Using this Manual
Precautions
• To prevent internal heat buildup, do not block the
ventilation openings.
We recommend that you carefully review the
contents of the following four sections in the order
provided to ensure that you fully understand the
operation of your new projection TV.
Safety
• Do not install the projection TV in a hot or humid
place, or in a place subject to excessive dust or
mechanical vibration.
• Operate the projection TV only on 120 V AC.
• The plug is designed, for safety purposes, to fit into
the wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact your
dealer.
• Avoid operating the projection TV at temperature
below 5°C (41°F).
1 Installing and Connecting the Projection TV
This section guides you through your initial set
up. It shows you how to install your projection
TV, to connect your new components and to
connect to the antenna and cable.
• If the projection TV is transported directly from a
cold to a warm location, or if the room temperature
changes suddenly, the picture may be blurred or
show poor color. In this case, please wait a few
hours to let the moisture evaporate before turning
on the projection TV.
• If any liquid or solid object should fall inside the
cabinet, unplug the projection TV immediately and
have it checked by qualified service personnel
before operating it further.
2 Basic Setup
This section teaches you the basic skills needed
to operate your new projection TV, including
Easy Set Up. It shows you how to operate the
remote control’s special functions.
• If you will not be using the projection TV for
several days, disconnect the power by pulling the
plug itself. Never pull on the cord.
• To obtain the best picture, do not expose the screen
to direct illumination or direct sunlight. It is
recommended to use spot lighting directed down
from the ceiling or to cover the windows that face
the screen with opaque drapery. It is desirable to
install the projection TV in a room where the floor
and walls are not of a reflective material.
For details concerning safety precautions, see
“Important Safeguards” on page 3.
3 Using Your New Projection TV
This section shows you how to begin using
your new projection TV. It shows you how to
use your remote control’s features.
Note on cleaning
Clean the cabinet of the projection TV with a dry
soft cloth. To remove dust from the screen, wipe it
gently with a soft cloth. Stubborn stains may be
removed with a cloth slightly dampened with
solution of mild soap and warm water. Never use
strong solvents such as thinner or benzine for
cleaning.
4 Adjusting Your Set Up (menus)
This section teaches you how to access on-
screen menus and adjust your projection TV’s
settings.
Instructions in this manual are written for the remote
control. Similar controls may be found on the
projection TV console.
If the picture becomes dark after using the
projection TV for a long period of time, it may be
necessary to clean the inside of the projection TV.
Consult qualified service personnel.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
For the set w ith a
polarized AC pow er
cord plug
the possibility of an internal malfunction that
could create a fire hazard.
Important Safeguards
For your protection, please read these instructions
completely, and keep this manual for future
reference.
Object and Liquid
Entry
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to have a suitable outlet installed.
Do not defeat the safety purpose of the polarized
plug by forcing it in.
Never push objects of any
kind into the set through the
cabinet slots as they may
touch dangerous voltage
points or short out parts that
could result in a fire or
electric shock. Never spill
liquid of any kind on the set.
Carefully observe and comply with all warnings,
cautions and instructions placed on the set, or
described in the operating instructions or service
manual.
Alternate Warning
For the set w ith a
three-w ire grounding
type AC plug
WARNING
To guard against injury, the following basic safety
precautions should be observed in the installation,
use, and servicing of the set.
Attachm ents
Do not use attachments not
recommended by the
manufacturer, as they may
cause hazards.
This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your
electrician to have a suitable outlet installed. Do
not defeat the safety purpose of the grounding
plug.
Use
Pow er Sources
This set should be operated
only from the type of power
source indicated on the
serial/model plate.
Cleaning
Overloading
Do not overload wall outlets,
extension cords or
convenience receptacles
beyond their capacity, since
this can result in fire or
electric shock.
Unplug the set from the wall
outlet before cleaning or
polishing it. Do not use
liquid cleaners or aerosol
cleaners. Use a cloth lightly
dampened with water for
cleaning the exterior of the
set.
If you are not sure of the
type of electrical power
supplied to your home, consult your dealer or local
power company. For those sets designed to operate
from battery power, refer to the operating
instructions.
Always turn the set off when
it is not to be used. When the
set is left unattended and
unused for long periods of
time, unplug it from the wall
outlet as a precaution against
Grounding or Polarization
This set is equipped with a polarized AC power
cord plug (a plug having one blade wider than the
other), or with a three-wire grounding type plug (a
plug having a third pin for grounding).
Follow the instructions below:
(continued)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
If a snapping or popping
sound from a projection TV
set is continuous or frequent
while the projection TV is
operating, unplug the
projection TV and consult
An appliance and cart
Pow er-Cord Protection
Do not allow anything to rest
on or roll over the power
cord, and do not place the set
where the power cord is
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
subject to wear or abuse.
your dealer or service
technician. It is normal for
some projection TV sets to
combination to overturn.
Antennas
Ventilation
Outdoor Antenna Grounding — If an
outdoor antenna is installed, follow the precautions
below.
The slots and openings in the cabinet and in the
back or bottom are provided for necessary
ventilation. To ensure reliable operation of the set,
and to protect it from overheating, these slots and
openings must never be blocked or covered.
- Never cover the slots and
make occasional snapping or popping sounds,
particularly when being turned on or off.
An outdoor antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can
come in contact with such power lines or circuits.
Installation
Water and Moisture
Do not use power-line
operated sets near water—
for example, near a bathtub,
washbowl, kitchen sink, or
laundry tub, in a wet
openings with a cloth or
other materials.
WHEN INSTALLING AN OUTDOOR
ANTENNA SYSTEM, EXTREME CARE
SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR
CIRCUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
- Never block the slots and
openings by placing the set
on a bed, sofa, rug or other
similar surface.
basement or near a
swimming pool, etc.
Be sure the antenna system is grounded so as to
provide some protection against voltage surges and
built-up static charges.
Accessories
- Never place the set in a
confined space, such as a
bookcase, or built-in cabinet
unless proper ventilation is
provided.
Do not place the set on an
unstable cart, stand, table or
shelf. The set may fall,
causing serious injury to a
child or an adult, and
serious damage to the set.
Use only a cart or stand
recommended by the
manufacturer for the
specific model of projection
TV.
Section 810 of the National Electrical Code (NEC)
in USA and Section 54 of the Canadian Electrical
Code in Canada provides information with respect
to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
- Do not place the set near or
over a radiator or heat
register, or where it is
exposed to direct sunlight.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Grounding According to the
NEC — Refer to section 54-300 of Canadian
Electrical Code for Antenna Grounding.
- If liquid has been spilled
into the set.
Replacem ent Parts
When replacement parts are required, be sure the
service technician certifies in writing that he has
used replacement parts specified by the
manufacturer that have the same characteristics as
the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Antenna lead-in
wire
Ground clamp
Antenna discharge
unit (NEC Section
810-20)
- If the set has been exposed
to rain or water.
Grounding
conductors (NEC
Section 810-21)
Safety Check
Upon completion of any
service or repairs to the set,
ask the service technician to
perform routine safety
checks (as specified by the
manufacturer) to determine
that the set is in safe
Ground clamps
Electric service
- If the set has been subject
to excessive shock by being
dropped, or the cabinet has
been damaged.
equipment
Power service
grounding electrode
system (NEC Art 250
Part H)
NEC: National
Electrical Code
operating condition, and to
so certify.
- If the set does not operate
normally when following the
operating instructions.
Adjust only those controls
that are specified in the
Lightning
For added protection for this television receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the receiver
due to lightning and power-line surges.
When the set reaches the end
of its useful life, improper
disposal could result in a
picture tube implosion. Ask
aqualified service technician
to dispose of the set.
operating instructions.
Improper adjustment of other controls may result
in damage and will often require extensive work by
a qualified technician to restore the set to normal
operation.
Service
Dam age Requiring Service
Unplug the set from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
- When the set exhibits a distinct change in
performance—this indicates a need for service.
Servicing
Do not attempt to service the
set yourself since opening
- When the power cord or
plug is damaged or frayed.
the cabinet may expose you
to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR SPEAKER OUT R to the terminal on the
other one.
Recommended viewing area
(Vertical)
InstallingandConnecting
the Projection TV
Note:
• When you use a speaker other than one that we
recommend, use a speaker with maximum input
power of more than 20 W and impedance of 8
ohms.
Carrying Your
Projection TV
(Rear of projection TV)
Carrying the projection TV requires three or more
people.
(
)
REAR SPEAKER OUT MIN 8
L
The projection TV has been equipped with casters
for easy movement on a hard surface. Please move
your projection TV using the casters.
L
20˚
20˚
R
R
Speaker cord
(not supplied)
Installing the
Projection TV
Recommended viewing area
(Horizontal)
Mounting the Rear
Speakers (not
supplied)
Speaker
Speaker
SS-MB115
SS-MB115
60˚
(not supplied) etc.
(not supplied) etc.
For enhanced surround effect, connect the rear
speakers to your projection TV.
60˚
Connecting the rear speakers
Using the speaker cords, connect REAR
SPEAKER OUT L on your projection TV to the
speaker terminal on one rear speaker, and connect
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Installation
For optimum surround effect, mount the rear
speakers in the following places (as shown in the
illustration):
C
o
m
p
o
n
e
n
t
v
i
d
e
o
c
a
b
l
e
f
o
r
a
D
T
V
Connector Types
receiver
You may find it necessary to use some of the
following connector types during set up.
Push into connection.
• on a wall, as high as the listener’s ears.
• on a table, as high as the listener’s ears.
G/Y - Green
B/PB - Blue
R/PR - Red
HD - Gray
VD - Black
Coaxial cable
Standard TV cable and antenna cable
Plug Type
Push into connection.
Screw-on Type
Rear speaker
Projection TV
CONTROL S cable
Screw into connection.
Sony cable for CONTROL S connections. These
features are exclusive to Sony products and allow
greater control of all Sony equipment.
S Video cable
Push into connection.
High quality video cable for enhanced picture
quality
(Rear of projection TV)
(continued)
Align guides and
push into connection.
Audio/Video cable
Push into connection.
Left rear
speaker
Right rear
speaker
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Some DVD Players are equipped with the
following three video connectors.
Y - Green
PB (CB, Cb or B–Y) - Blue
PR (CR, Cr or R–Y) - Red
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About the CONTROL S IN/OUT
jacks
To control other Sony equipment with the
projection TV’s remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV with
the CONTROL S cable.
C
75-ohm coaxial cable
Making Connections
• VHF
(Rear of
projection TV)
VHF/UHF
Connecting Directly to a Cable
or an Antenna
and
EAC-66 U/V mixer
(not supplied)
The connection you choose will depend on the
cable found in your home. Newer homes will be
equipped with standard coaxial cable (see A);
older homes will probably have 300-ohm twin lead
cable (see B); still other homes may contain both
(see C).
To control the projection TV with a remote control
for another Sony product, connect the CONTROL
S OUT jack of the equipment to the CONTROL S
IN jack on the projection TV with the CONTROL
S cable.
• UHF
300-ohm twin lead cable
Cable or antenna
This is the simplest connection. Connection is
made directly from the cable or antenna to the
projection TV.
A
CONTROL
S
IN OUT
(Rear of projection TV)
(Rear of
projectionTV)
VHF/UHF
VHF/UHF
75-ohm
coaxial cable
Cable
• VHF only
or
AUX
CONTROL
S
IN
VIDEO
OUT
(DTV) SELECT
• VHF/UHF
or
VIDEO
4
5
IN
OUT
HD
VD
Cable and antenna
• Cable
IN
VIDEO
1
VIDEO
3
You may find it convenient to use the following set
up if your cable provider does not feature local
channels that you are able to receive using an
antenna.
S
VIDEO
VIDEO
VHF/UHF
B
Y
Y/G
VIDEO
L
(MONO)
PB
PR
PB/B
PR/R
(Rear of
projection TV)
VHF/UHF
L
L
AUDIO
R
(MONO)
AUDIO
R
R
300-ohm twin
lead cable
(Rear of
projectionTV)
• VHF only
or
COMPONENT
AUDIO
AUX
CATV cable
• UHF only
or
• VHF/UHF
Antenna connector
Antenna cable
VHF/UHF
Select Cable or ANT mode by pressing ANT on
the remote control.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
For this set up, you can switch between scrambled
channels (through your cable box), and normal
(CATV) channels by pressing ANT on your remote
control.
Connecting a Cable Box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to view
all channels.
Notes:
Also, set CABLE to ON in the CHANNEL SET
• You may be able to program your Sony remote
control to operate your cable box. (see “Operating a
Cable Box or Satellite Receiver (SAT)” on page 56)
UP menu. (see page 41)
(Rear of Projection TV)
VHF/UHF
Cable
• During PIP, P&P, CHANNEL INDEX or
can only be viewed in the main picture.
• If you are connecting a cable box through the AUX
input and would like to switch between the AUX
and normal (CATV) input, you should consider
using CHANNEL FIX. (see “CHANNEL FIX” on
page 42)
IN
OUT
*cable box
Note:
through your cable box, you should consider using
the CHANNEL FIX feature. (see “CHANNEL
FIX” on page 42)
Cable box and cable
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
*cable box
(Rear of Projection TV)
AUX
VHF/UHF
CATV cable
(unscrambled channels)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an Antenna/Cable
TV System to a VCR
Disconnect all power sources before making any connections.
1 Attach the coaxial cable from the incoming
(Rear of projection TV)
cable connection or antenna to IN on the VCR.
AUX
CONTROL
S
IN
OUT
VIDEO
4
VIDEO 5 (DTV) SELECT
2 Using a coaxial cable, connect OUT on the
IN
OUT
VCR to VHF/UHF on the projection TV.
HD
VD
IN
3 Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the VCR to
AUDIO and S VIDEO IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
VIDEO
1
VIDEO
3
S
VIDEO
VIDEO
VHF/UHF
2
Y
Y/G
VIDEO
L
* If your VCR is not equipped with S VIDEO, use
a VIDEO cable (yellow) instead of the S VIDEO
cable.
(MONO)
PB
PR
PB/B
PR/R
L
L
AUDIO
R
(MONO)
Coaxial cable
AUDIO
R
R
COMPONENT
AUDIO
Note:
VCR
• If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
VIDEO
AUDIO-L
AUDIO-R
S VIDEO
1
AUDIO R AUDIO L VIDEO
S VIDEO
LINE
IN
Cable/
VHF/UHF
OUT
IN
Antenna
LINE
OUT
VMC-810S/820S
(not supplied)
3
YC-15V/30V (not supplied)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR and
Disconnect all power sources before making any connections.
Projection TV to a Cable Box
1 Connect the single (input) jack of the splitter to
the incoming cable connection, and connect
the other two (output) jacks (using the coaxial
cable) to IN on the cable box and VHF/UHF
on the projection TV.
(Rear of projection TV)
AUX
CONTROL
S
IN
VIDEO
OUT
VIDEO
4
5
(DTV) SELECT
IN
OUT
2 Using a coaxial cable, connect OUT on the
HD
VD
cable box to IN on the VCR.
IN
VIDEO
1
VIDEO
3
3 Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the VCR to
AUDIO and S VIDEO IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
S
VIDEO
VIDEO
VHF/UHF
Y
Y/G
VIDEO
L
(MONO)
PB
PR
PB/B
PR/R
L
L
AUDIO
R
(MONO)
AUDIO
Coaxial cable
R
* If your VCR is not equipped with S VIDEO, use
a VIDEO cable (yellow) instead of the S VIDEO
cable.
COMPONENT
AUDIO
VCR
VIDEO
S VIDEO
AUDIO R AUDIO L VIDEO
S VIDEO
AUDIO-L
AUDIO-R
Note:
LINE
IN
VHF/UHF
• To view scrambled channels through the cable box,
select the video input which the cable box is
connected to by pressing TV/VIDEO.
OUT
IN
LINE
OUT
2
1
VMC-810S/820S
(not supplied)
Cable/
Antenna
OUT
IN
3
Splitter
(not supplied)
Cable box
YC-15V/30V (not supplied)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DTV (Digital
Television) Receiver
Disconnect all power sources before making any connections.
Before connecting, be sure to read the Operating
Instructions of the DTV receiver.
2
Connecting a DTV (digital
television) receiver with the Y/PB/
PR (component video input) jacks
1 Attach the coaxial cable from the roof antenna
VMC-10HG
(not supplied)
to VHF/UHF on the DTV receiver.
2 Using three VIDEO cables, connect Y, PB and
PR of COMPONENT VIDEO OUT on the
DTV receiver to Y, PB and PR of VIDEO 5
(DTV) IN on the projection TV.
PB
Y
PR
AUX
CONTROL
S
IN
VIDEO
OUT
VIDO
4
5
(DTV) SELECT
DTV receiver
IN
OUT
3 Using an AUDIO cable, connect LINE OUT
on the DTV receiver to AUDIO of VIDEO 5
(DTV) IN on the projection TV (White-
AUDIO Left, Red-AUDIO Right).
HD
VD
S
VIDEO
VIDEO
IN
VIDEO
1
VIDEO
3
VHF/UHF
(DTV)
S
VIDEO
VIDEO
1
1
2
2
Y
VHF/UHF
L
(MONO)
Y
Y/G
PB
VIDEO
R
L
4 Select VIDEO 5 by the TV/VIDEO button.
(MONO)
PB
PR
PB/B
PR/R
PR
3
L
AUDIO OUT
VIDEO OUT
L
AUDIO
R
(MONO)
AUDIO
R
R
5 Select the SET UP menu and set DTV INPUT
to Y PB PR. (see “DTV INPUT” on page 47)
COMPONENT
AUDIO
1
Note:
Roof Antenna
AUDIO-R
AUDIO-L
• Some DTV receiver terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
3
RK-74A (not supplied)
Connect PB (blue) to CB, Cb or B-Y.
Connect PR (red) to CR, Cr or R-Y.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DTV (digital
television) receiver with the G/B/R/
HD/VD jacks
Disconnect all power sources before making any connections.
1 Attach the coaxial cable from the roof antenna
to VHF/UHF on the DTV receiver.
2
2 Using a component video cable for DTV
receiver, connect G, B, R, HD and VD of
VIDEO OUT on the DTV receiver to G, B, R,
HD and VD respectively of VIDEO 5 (DTV)
IN on the projection TV.
Component video cable for
DTV receiver (not supplied)
If the DTV receiver is equipped with the Y/PB/
PR jacks, proceed to step 2 in “Connecting a
DTV (digital television) receiver with the Y/
PB/PR (component video input) jacks on page
12.
HD
VD
G
B
R
R
HD
VD
AUX
G
CONTROL
S
N
VIDEO
OUT
(DTV) SELECT
VIDEO
4
5
B
DTV receiver
IN
OUT
HD
VD
3 Using an AUDIO cable, connect AUDIO OUT
on the DTV receiver to AUDIO of VIDEO 5
(DTV) IN on the projection TV (White-
AUDIO Left, Red-AUDIO Right).
S
VIDEO
VIDEO
IN
VIDEO
1
VIDEO
3
VHF/UHF
(DTV)
S
VIDEO
VIDEO
1
1
2
2
Y
R
G
VHF/UHF
L
(MONO)
Y
Y/G
PB
HD
VD
VIDEO
R
L
(MONO)
PB
PR
PB/B
PR/R
PR
B
3
4
4 Select VIDEO 5 by the TV/VIDEO button.
L
AUDIO OUT
VIDEO OUT
L
AUDIO
R
(MONO)
AUDIO
R
R
5 Select the SET UP menu and set DTV INPUT
COMPONENT
AUDIO
to R.G.B. (see “DTV INPUT” on page 47)
1
Roof Antenna
AUDIO-R
AUDIO-L
3
RK-74A (not supplied)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Satellite
Receiver (SAT)
Disconnect all power sources before making any connections.
1 Connect the cable from the satellite antenna to
the satellite receiver.
Satellite antenna
cable
Cable/
Antenna
(Rear of projection TV)
2 Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF on
the projection TV.
AUX
CONTROL
S
IN
OUT
VIDEO
4
VIDEO 5 (DTV) SELECT
IN
OUT
HD
VD
3 Using AUDIO and S VIDEO cables, connect
AUDIO and S VIDEO OUT on the satellite
receiver to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
2
1
IN
VIDEO
1
VIDEO
3
S
VIDEO
VIDEO
VHF/UHF
Y
Y/G
VIDEO
L
(MONO)
PB
PR
PB/B
PR/R
L
Note:
L
AUDIO
R
(MONO)
AUDIO
R
• To view input from the satellite receiver, select the
video input which the satellite receiver is connected
to by pressing TV/VIDEO on the remote control.
Satellite receiver
SATELLITE IN
VHF/UHF
S VIDEO IN
COMPONENT
AUDIO
AUDIO R AUDIO L VIDEO
OUT
LINE OUT
S-VIDEO
AUDIO-L
AUDIO-R
RK-74A (not supplied)
3
YC-15V/30V (not supplied)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Satellite
Receiver (SAT) and VCR
Disconnect all power sources before making any connections.
1 Connect the cable from the satellite antenna to
3
(Rear of projection TV)
the satellite receiver.
AUX
CONTROL
S
IN
OUT
VIDEO
4
VIDEO 5 (DTV) SELECT
2 Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF IN
on the VCR.
Satellite
receiver
SATELLITE IN
LINE OUT
IN
OUT
VHF/UHF
IN
AUDIO R AUDIO L VIDEO S VIDEO
HD
VD
OUT
IN
VIDEO
1
VIDEO
3
3 Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
S
VIDEO
VIDEO
VHF/UHF
1
Y
Y/G
VIDEO
YC-15V/30V
(not
supplied)
L
4 Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the satellite
receiver to AUDIO and S VIDEO IN on the
VCR.
Satellite
antenna
cable
(MONO)
PB
PR
PB/B
PR/R
L
L
AUDIO
R
(MONO)
AUDIO
R
COMPONENT
AUDIO
4
5 Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the VCR to
AUDIO and S VIDEO IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
VMC-810S/820S
(not supplied)
VIDEO
S
AUDIO-L
VIDEO
AUDIO-R
* If your VCR or satellite receiver is not equipped
with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
VCR
5
S VIDEO
AUDIO R AUIO L VIDEO
LINE
IN
VHF/UHF
OUT
Note:
LINE
OUT
IN
• To view input from the satellite receiver or VCR,
select the video input which your satellite receiver
or VCR is connected to by pressing TV/VIDEO on
the remote control.
Cable/
Antenna
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Camcorder
Use this connection to view a picture directly from
your camcorder.
(Inside the drop down panel on
the Front of projection TV)
1 Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the camcorder
to AUDIO and S VIDEO IN on the right side
panel inside the drop-down panel on the front
of the projection TV (White-AUDIO Left,
Red-AUDIO Right**).
V
O
L
U
M
T
E
V
/V
ID
C
H
E
O
+
A
N
N
E
L
–
+
–
2 Press VIDEO 2 to select the video inputs from
a camcorder.
* If your camcorder is not equipped with S VIDEO,
use a VIDEO cable (yellow) instead of the S
VIDEO cable.
Push to open.
S
VIDEO
T
U
P
IN
2
O
E
ID
V
VIDEO
**If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
L(MONO)
AUDIO
R
VIDEO
AUDIO-L
AUDIO-R
S VIDEO
Audio/video
outputs
YC-15V/30V
(not supplied)
VMC-810S/820S
(not supplied)
1
1
Camcorder
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Two VCRs for
Tape Editing
Disconnect all power sources before making any connections.
(Rear of projection TV)
AUX
CONTROL
S
IN
OUT
SELECT OUT allows you to use a second VCR to
record a program being played by the primary
VCR or to perform tape editing and dubbing.
VIDEO
4
VIDEO 5 (DTV) SELECT
IN
OUT
HD
VD
IN
VIDEO
1
VIDEO
3
1 Connect the VCR intended for playback using
the connection instructions on page 10 of this
manual.
S
VIDEO
VIDEO
VHF/UHF
Y
Y/G
VIDEO
L
2 Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR intended
for recording to AUDIO and VIDEO OUT of
SELECT OUT on the projection TV.
(MONO)
PB
PR
PB/B
PR/R
L
L
AUDIO
R
(MONO)
AUDIO
R
R
VCR (for playback)
VCR (for recording)
AUDIO R AUDIO L VIDEO
OUT
IN
AUDIO R AUDIO L VIDEO
OUT
LINE
OUT
LINE
IN
COMPONENT
AUDIO
IN
Notes:
VIDEO
AUDIO-L
AUDIO-R
VIDEO
AUDIO-L
AUDIO-R
• Do not change the input signal while editing
through SELECT OUT.
• When connecting a single VCR to the projection
TV: if VCR LINE OUT is connected to VIDEO IN
on the projection TV, do not connect the SELECT
OUT on the projection TV to the VCR LINE
INPUT (see right). Doing so will cause program
interference and other viewing problems.
2
1
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
• You can select the output signal from SELECT
OUT of the SET UP menu. (see “SELECT OUT”
on page 45)
(Rear of projection TV)
• When the projection TV turns off, the signal is not
output through SELECT OUT.
VIDEO IN
SELECT
OUT
Indicates direction
of signal
LINE
IN
OUT
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD Player With
S Video or Composite Video
Output Connectors
Disconnect all power sources before making any connections.
Using an AUDIO and S VIDEO cables, connect
AUDIO and S VIDEO IN on the projection TV to
AUDIO and S VIDEO OUT on the DVD Player
(White-AUDIO Left, Red-AUDIO Right).
(Rear of projection TV)
AUX
CONTROL
S
IN
OUT
VIDEO
4
VIDEO 5 (DTV) SELECT
IN
OUT
Note:
HD
VD
IN
• Since the high quality pictures on a DVD disc
contain a lot of information, picture noise may
appear. In this case, adjust NR in the VIDEO menu.
(see “NR” on page 37)
VIDEO
1
VIDEO
3
S
VIDEO
VIDEO
VHF/UHF
Y
Y/G
DVD
VIDEO
L
(MONO)
PB
PR
PB/B
PR/R
L
L
AUDIO
R
LINE OUT
S
VIDEO OUT
COMPONENT VIDEO OUT
DIGITAL OUT
OPTICAL COAXIAL
(MONO)
R–AUDIO 1–L VIDEO
Y
B-Y
R-Y
AUDIO
R
R
COMPONENT
AUDIO
Audio/S video
outputs
AUDIO-L
AUDIO-R
S VIDEO
RK-74A (not supplied)
YC-15V/30V (not supplied)
Connect the DVD Player directly
to the projection TV. Connecting
the DVD Player through other
video equipment will cause
unwanted picture noise.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD Player With
Component Video Output
Connectors
Disconnect all power sources before making any connections.
1 Using an AUDIO cable, connect AUDIO R and
L of LINE OUT on the DVD Player to AUDIO
R and L of VIDEO 4 IN or VIDEO 5 (DTV)
IN on the projection TV (White-AUDIO Left,
Red-AUDIO Right).
You can connect three VIDEO
cables to Y/PB/PR of VIDEO 5
(DTV) IN also.
PR
VMC-10HG
(not supplied)
PB
Y
(Rear of projection TV)
2 Using three VIDEO cables, connect Y, PB and
PR of the COMPONENT VIDEO OUT on the
DVD Player to Y, PB and PR of VIDEO 4 IN or
VIDEO 5 (DTV) IN on the projection TV.
AUX
CONTROL
S
IN
OUT
VIDEO
4
VIDEO 5 (DV) SELECT
IN
OUT
HD
VD
IN
2
VIDEO
1
VIDEO
3
Notes:
PR
S
VIDEO
VIDEO
• If your DVD Player has 480p format capability,
connect it to the Y, PB and PR of VIDEO 5 (DTV)
IN on the projection TV.
VHF/UHF
PB
Y
Y/G
PB/B
PR/R
Y
DVD
VIDEO
L
(MONO)
PB
PR
L
L
AUDIO
R
LINE OUT
S
VIDEO OUT
COMPONT VIDEOUT
PB PR
DIGITAL OUT
OPTICAL COAXIAL
• Some DVD Player terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
Connect PB (blue) to CB, Cb or B-Y.
Connect PR (red) to CR, Cr or R-Y.
(MONO)
R–AUDIO 1–L VIDEO
Y
AUDIO
R
R
COMPONENT
AUDIO
AUDIO-L
AUDIO-R
• Since the high quality pictures on a DVD disc
contain a lot of information, picture noise may
appear. In this case, adjust NR in the VIDEO menu.
(see “NR” on page 37)
1
Connect the DVD Player directly to
the projection TV. Connecting the
DVD Player through other video
equipment will cause unwanted
picture noise.
You can connect an AUDIO
cable to AUDIO R and L of
VIDEO 5 (DTV) IN also.
RK-74A (not supplied)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an AV Receiver
Disconnect all power sources before making any connections.
For greater control of all audio and video
equipment, connect an AV receiver.
Coaxial cable
VMC-810S/820S (not supplied)
1-2Perform as described on page 10.
(Rear of projection TV)
3 Using a VIDEO cable, connect VIDEO of
VIDEO 1 IN on the projection TV to
MONITOR OUT on the AV receiver.
2
AUX
CONTROL
S
IN
OUT
VIDEO
4
VIDEO 5 (DTV) SELECT
IN
OUT
VCR
HD
VD
4 Using an AUDIO/VIDEO cable, connect
SELECT OUT on the projection TV to VIDEO
2 IN on the AV receiver.
IN
S VIDEO
AUDO R AUO L VIEO
VIDEO
1
VIDEO
3
LINE
IN
VHFUHF
OUT
S
VIDEO
VIDEO
LINE
OUT
VHF/UHF
IN
5 Using an AUDIO/VIDEO cable, connect the
Y
Y/G
PB/B
PR/R
VIDEO
video equipment to the AV receiver.
L
PB
PR
(MONO)
L
L
AUDIO
R
(MONO)
6 Select the SET UP menu and set SELECT
OUT to TV OUT. (see “SELECT OUT” on
page 45)
4
AUDIO
R
1
R
Cable/
Antenna
VMC-810S/
820S (not
supplied)
COMPONENT
AUDIO
Note:
VIDEO
AUDIO-L
AUDIO-R
VIDEO
• You may want to use CHANNEL FIX to fix your
TV’s input to the AV receiver (VIDEO 1). (see
“CHANNEL FIX” on page 42)
5
AUDIO/
VIDEO
2 IN
VMC-810S/820S (not supplied)
AUDIO/
VIDEO 1 IN
5
4
6
MONITOR
OUT
3
7
8
9
1
/
u
2
3
1
0
10
A
OFF
B
A
+
B
–
+
–
+
AUDIO/
VIDEO 1
OUT
VMC-10HG (not supplied)
STR-V555ES etc.
(not supplied)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an Audio System
Disconnect all power sources before making any connections.
For more dynamic sound, connect an audio system
to the projection TV.
(Rear of projection TV)
1 Using an AUDIO cable, connect AUDIO
(VAR) OUT on the projection TV to one of the
unused Line inputs (e.g. Tape-2, AUX1, etc.)
on the stereo (White-AUDIO Left, Red-
AUDIO Right).
L
L
R
R
2 Set the stereo to the chosen Line input and use
the AUDIO menu to switch the TV’s speakers
off. (see “SPEAKER” on page 38)
Note:
AUDIO OUT
FIX VAR
AUDIO (VAR) OUT-L
1
• You can adjust VOLUME, BASS, TREBLE and
BALANCE through the projection TV on AUDIO
(VAR) OUT only.
L
R
AUDIO (VAR)
RK-74A
OUT-R
(not supplied)
Line
input
I
N
P
U
T
S
E
L
E
C
T
O
R
VOLUME
PROTECTION
POWER
E
O
N
L
I
N
K
TAPE1/DAT
TAPE2/MD
AUX
SACD/CD
TUNER
PHONO
PHNES
APE
S
O
U
R
C
E
D
I
R
E
C
T
L
0
10
¯
F
A
P
E
0
LE
RH
Stereo amplifier
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an Amplifier That
Supports Dolby Pro Logic
Decoder
Disconnect all power sources before making any connections.
(Rear of projection TV)
If you use an amplifier with a Dolby Pro Logic
decoder instead of the projection TV’s audio
system, you can still use the projection TV’s
speaker as a center speaker.
L
L
R
R
1 Using the speaker cords (supplied with the
amplifier), connect the speaker terminals on
the amplifier to CENTER SPEAKER IN +/–
on the projection TV.
CENTER IN #
CENTER IN 3
AUDIO OUT
FIX VAR
2 Using an AUDIO cable, connect AUDIO (FIX)
OUT on the projection TV to one of the unused
Line inputs (e.g. Tape-2, AUX1, etc.) on the
amplifier (White-AUDIO Left, red-AUDIO
Right).
L
1
R
AUDIO (FIX) OUT-R
AUDIO (FIX) OUT-L
3 Set the amplifier to the chosen Line input and
use the AUDIO menu to set “SPEAKER” to
“CENTER IN” on the projection TV. (see
“SPEAKER” on page 38)
2
RK-74A (not supplied)
3
Line input
Amplifier with Dolby
Pro Logic decoder
Rear
speaker (R)
Rear
speaker (L)
Front
speaker (R)
Front
speaker (L)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control joystick
A
d
j
u
s
t
i
n
g
s
l
i
d
e
r
s
Basic Set Up
When menu items present a slider ( or ),
move the joystick up, down, left or right to adjust
the setting.
1
4
7
2
5
8
0
3
6
9
Move
Using the Remote
Control
On-line help/instructions
Several menu windows will provide prompts and
instructions to assist you in navigating through the
different functions.
m
Inserting the batteries
Select
Insert two size AA (R6) batteries (supplied) by
matching the + and – on the batteries to the
diagram inside the remote control’s battery
compartment.
Joystick
The supplied remote control has a joystick which
moves the on-screen selector in eight directions. In
most cases, moving the joystick up, down, left or
right will cause the selector to move in the selected
direction.
In some cases, the selector may move in eight
directions according to the function. Pressing
down on the center of the joystick
the selected item.
will activate
Notes:
You may also move the joystick right to activate a
selected item. (There are some exceptions to this
option.)
• Remove the batteries to avoid damage from
possible battery leakage whenever you anticipate
that the remote control will not be used for an
extended period.
• Handle the remote control with care. Avoid
dropping it, getting it wet, or placing it in direct
sunlight, near a heater or where the humidity is
high.
• Your remote control can be programmed to operate
most video equipment. (see “Operating Video
Equipment” on page 54)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the buttons on the front panel and inside the
drop-down panel on the projection TV:
The screen will change to reflect your choice.
Setting Up the
Projection TV
Automatically
CHANNEL
ENGLISH
ESPAÑOL
:
[ CH + ]
[ CH – ]
:
AUTO SET UP
:
[ VOL – ]
POWER
The AUTO SET UP feature will allow you to set
the on-screen language and set all receivable
channels.
TIMER/
First Please connect
the antenna.
Press SET UP to exit.
STAND BY
[
]
STEREO
4 Press VOLUME – to continue.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
SET UP
FLASH FOCUS
VOLUME CHANNEL
+
–
+
–
CONTINUE TO
VOLUME
TV/VIDEO
AUTO PROGRAM?
You can also set up the projection TV manually. (see
“Using the CHANNEL SET UP Menu” on page 41)
YES: [CH +]
NO : [CH –]
Notes:
• Perform this function during the day, with the
antenna and/or cable properly connected, to
ensure that all available channels will be
broadcasting and receivable.
POWER
5 Press CHANNEL + to preset channels
automatically.
CHANNEL
• Before you perform AUTO SET UP again, make
sure that the input from ANT (not AUX) is
selected by pressing ANT until “AUX” does not
appear next to the channel number.
2 Press SET UP inside the drop-down panel.
AUTO PROGRAM
The AUTO SET UP screen appears.
ENGLISH
ESPAÑOL
AUTO SET UP
:
[ CH + ]
[ CH – ]
[ VOL – ]
SET UP
:
• When you perform AUTO PROGRAM, your
CHANNEL FIX and ON/OFF TIMER settings
will be erased.
:
“AUTO PROGRAM” appears and the
projection TV starts scanning and presetting
channels automatically. While scanning, the
received channel will be displayed on the sub
screen. When all the receivable channels are
stored, the lowest numbered channel will be
displayed.
First Please connect
the antenna.
Press SET UP to exit.
[
]
• When you perform AUTO SET UP, all the
settings in the VIDEO and AUDIO menus are
reset to the factory settings.
3 Press CHANNEL + to select English,
CHANNEL – to select Spanish.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip z
The cross pattern appears and FLASH FOCUS
begins to work. The adjustment is completed
when the cross pattern becomes white.
If your projection TV is not
connected to a cable system
If you perform AUTO SET UP, CABLE is set to
ON automatically. After finishing AUTO SET UP,
set CABLE to OFF in the CHANNEL SET UP
menu, then set AUTO PROGRAM to YES to
perform automatic channel presetting. (see
It is recommended to perform FLASH FOCUS about
30 minutes after the projection TV is first turned on.
POWER
FLASH FOCUS
TIMER/
STAND BY
“CABLE” and “AUTO PROGRAM” on page 42)
STEREO
To perform AUTO SET UP again
• Press SET UP inside the drop-down panel on the
SET UP
FLASH FOCUS
VOLUME CHANNEL
+
–
+
–
projection TV, and perform steps 3-5 on page 24.
TV/VIDEO
• Press CHANNEL + or CHANNEL – to select a
language.
• Press VOLUME – to restore factory settings
(“CONTINUE TO AUTO PROGRAM?” will
appear on the screen. Press CHANNEL + to
execute or CHANNEL – to exit).
• Press SET UP to exit.
Toobtainanoptimumconvergence
for Digital TV programs
WIDE
The optimum convergence alignment varies with
digital TV formats. Whenever you find that the
picture blurs, press FLASH FOCUS.
Adjusting the
Convergence
Automatically (FLASH
FOCUS)
MODE
1
2
3
Notes:
1 Receive a TV or cable TV program.
• You cannot perform any other functions until
FLASH FOCUS has completed its cycle.
2 Press FLASH FOCUS for every wide screen
mode; NORMAL, WIDE ZOOM, ZOOM and
FULL.
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs.
• If you perform any other operation while FLASH
FOCUS is in progress, FLASH FOCUS operation is
canceled.
FLASH FOCUS
Before you use your projection TV, be sure to
adjust the convergence.
The FLASH FOCUS feature allows you to adjust
the convergence automatically.
To select the wide screen mode, press WIDE
MODE on the remote control.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Usingthewhitelabeledbuttonsfor
projection TV operations
Using Your New
Projection TV
CH +/–
Press to scan through the channels (+ up or –
down).
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE FRONT
COVER OF THIS MANUAL AS YOU REVIEW THE
FOLLOWING DESCRIPTIONS
VOL +/–
Watching the TV
Press to adjust the volume (+ up or – down).
Many TV features can be accessed directly
through the remote control. The following will
explain the function of some buttons found on your
remote control.
TV (FUNCTION)
JUMP
Activates the remote control for use with the
projection TV.
Press to alternate or jump back and forth between two
channels. The projection TV will jump between the
current channel and the last channel selected using the
0-9 buttons.
ANT
— (AUX input)
MUTING
Press to change between the VHF/UHF input and
the AUX input. (for detailed connection
information, see “Cable and antenna” on page 8 or
“Cable box and cable” on page 9).
Press to mute the sound. “MUTING” will appear on
the screen and will dim three seconds later. To restore
sound, press again or press VOL +.
TV POWER
FREEZE
— (yellow labeled button)
Turns the projection TV on and off. If a video
input indication (e.g., VIDEO 1, VIDEO 2)
appears on the screen, press TV/VIDEO until a
channel number appears.
This is useful when you need to copy down
information that appears on the TV’s screen.
Press to freeze the picture.
Press again or press (OFF) to cancel.
-
and ENTER
0
9
If you select TWIN as a FREEZE MODE in the
SET UP menu, you can freeze the desired scene
and display it on the left while viewing the normal
picture on the right. (see “FREEZE MODE” on
page 46)
Use for direct channel selection. Press 0-9 to select a
channel (for example, to select channel 10, press 1
and 0). The channel will change after 2 seconds, or
you can press ENTER for immediate selection.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
[CC]
PICTURE MODE
• The FREEZE button does not function with the
Press repeatedly to scroll through available
displays:
Press PICTURE MODE repeatedly to directly
choose one of five different video modes that best
suits the program you are watching.
picture from VIDEO 5 (DTV) IN.
• If the frozen picture mode is not canceled for more
than an hour, the normal picture is resumed
automatically.
Caption Vision
VIVID:
Displayed on the screen if the broadcaster offers
this service. (see “CAPTION VISION” on page
45)
Select for enhanced picture contrast and sharpness.
SLEEP
STANDARD:
Press repeatedly until the projection TV displays
the approximate time in minutes (30, 60, or 90)
that you want the projection TV to remain on
before shutting off automatically.
XDS (Extended Data Service)
Select to display a standard picture for normal
viewing environments.
Displays a network name, program name, program
type, program length, program description, call
letters and time of the show if the broadcaster
offers this service.
MOVIE:
Select to display a finely detailed picture for low
light environments.
Cancel by pressing until “SLEEP OFF” appears.
No display
“OFF” appears and the display is canceled.
GAME:
DISPLAY
Select to display graphics such as a video game.
Press to display the channel number, current time,
channel caption (if set), and MTS mode (if SAP is
selected). The SAP indication disappears and the
other indications dim three seconds later.
PRO (Professional):
Select to display a picture with minimum
enhancements.
TV/VIDEO
Press repeatedly to scroll through available video
inputs:
When you select each mode, you can also adjust
the picture quality (such as BRIGHTNESS,
COLOR, etc.) to suit your taste.
To turn the display off, press DISPLAY again.
TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4
and VIDEO 5
If you select SKIP as a VIDEO LABEL in the SET
UP menu, your projection TV will skip the video
input you selected. (see “VIDEO LABEL” on page
46)
For details, see “MODE” on page 36.
MTS
Press to scroll through the Multi-channel TV
Sound (MTS) options. (see “MTS” on page 37)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select a digital channel on the DTV receiver.
For details, see the Operating Instructions of
the DTV receiver.
Watching Digital TV
Watching the Picture
in Wide Screen Mode
Automatically — AUTO
WIDE
When you have connected the DTV receiver, you
can enjoy digital TV programs. This projection TV
is capable of receiving the 1080i, 720p, 480p and
480i digital TV formats.
4 Adjust the volume on this projection TV.
Tip z
The optimum convergence alignment varies with
blurs, press FLASH FOCUS. (for details, see page 25)
When a 480i format signal with an ID-1 (16:9
aspect ratio recorded) signal is received, the
projection TV automatically selects wide screen
mode.
Note:
This projection TV is not capable of displaying a
720p format signal as it is. When the 720p format
signal is received, it is converted into a 480p format
signal.
Notes:
• When the AUTO WIDE function does not work
correctly due to the quality of signal, select wide
screen mode manually. (see page 29)
To view a digital TV program
1 Connect the DTV receiver to VIDEO 5 (DTV)
IN on the projection TV. (for details, see pages
13 and 12)
• The AUTO WIDE function does not work when the
following signals are received:
- 480i format signal without an ID-1 (aspect ratio
recorded) signal
- 480p format signal
- 720p/1080i format signals (The picture is always
displayed in FULL mode)
2 Press TV/VIDEO to select VIDEO 5.
The digital TV format being received is
displayed on the screen for three seconds.
Note:
• You cannot select VIDEO 5 unless a DTV
receiver is connected.
Activating the AUTO WIDE function
Set AUTO WIDE in the WIDE SCREEN MODE
menu to ON. (see page 40)
TV/VIDEO
To deactivate the AUTO WIDE function
Set AUTO WIDE in the WIDE SCREEN MODE
menu to OFF. (see page 40)
DTV FORMAT : 480p
28
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO WIDE function works again when:
When receiving a normal 4:3 broadcast –
Watching the Picture in
Wide Screen Mode
NORMAL
-
video input signals are changed (see “TV/VIDEO”
on page 27)
When a normal 4:3 aspect ratio picture with an ID-
1 signal is received, NORMAL mode is
automatically selected. The picture is not enlarged
and is displayed as it is.
-
-
-
-
the projection TV is turned off
Manually — WIDE MODE
You can select the wide screen mode manually.
DIRECT PLAY is selected (see page 46)
ON/OFF TIMER works (see page 40)
AUTO WIDE in WIDE SCREEN MODE menu is
set to ON again (see page 40).
Note:
The 720p/1080i format signal is displayed in FULL
mode always.
,
NORMAL
Using WIDE ZOOM mode
Press WIDE MODE repeatedly on the remote
control.
You can enlarge a normal 4:3 picture of 480i
format signal by selecting WIDE ZOOM.
The picture is enlarged, while the upper and lower
parts of the picture are condensed to fit the 16:9
screen.
Tip z
WIDE MODE
When enlarging the picture to fill the 16:9 screen,
select WIDE ZOOM in WIDE SCREEN MODE menu
manually. (see “Using WIDE ZOOM mode” on this
page)
Each press scrolls through the following modes:
,
WIDE
ZOOM
When receiving a 4:3 squeezed picture –
FULL
When a squeezed video camera or DVD picture
with an ID-1 signal is received, FULL mode is
automatically selected.
The picture is enlarged horizontally only, to fill the
16:9 screen.
For details on each mode, see “To select the wide
screen mode automatically – WIDE MODE.”
Using ZOOM mode
You can enlarge a letter box movie (16:9 aspect
ratio) of a video tape or a DVD disc by selecting
ZOOM.
When selecting the wide screen mode
manually – Temporarily Auto Wide Off
The picture is enlarged horizontally and vertically
to an equal aspect ratio that fills the 16:9 screen.
When the wide screen mode is selected by pressing
the WIDE MODE button on the remote control,
the AUTO WIDE function does not work
,
FULL
temporarily. However, the settings of AUTO
WIDE in WIDE SCREEN MODE menu remains.
,
Note:
ZOOM
• The 720p/1080i format signal is displayed in FULL
mode always.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the yellow labeled buttons
for PIP operations
Caution about continued wide screen
mode usage for 4:3 aspect ratio pictures
Watching Two
Programs at One Time
— PIP
This projection TV was designed primarily for
viewing TV broadcasts in wide screen mode (16:9
aspect ratio pictures). Consistent and exclusive
viewing of 4:3 aspect ratio programs in NORMAL
mode will lead to permanent imprinting of the
gray band on both sides of the picture.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE FRONT
COVER OF THIS MANUAL AS YOU REVIEW THE
FOLLOWING DESCRIPTION
The Picture-in-Picture (PIP) feature allows you to
view two channels simultaneously, one in the full
picture.
Tip z
Therefore, when you watch conventional 4:3 ratio
TV programs, we recommend you select WIDE
ZOOM mode by using WIDE MODE button.
If you press RESET in PIP mode, the window picture
will move to the bottom right (factory-preset
location).
You can move the window picture to any location
on the screen.
Notes:
Note:
• Depending on the picture format, black bands may
• The PIP feature is not available for the inputs
from VIDEO 5 (DTV) IN.
be present on the top and bottom of the screen.
Press to display a window picture.
• For ZOOM and WIDE ZOOM modes you can
adjust the vertical position of the picture. (see “V
CENTER” on page 41)
Each time you press this button, the picture size
will change (1/4 t 1/9 t 1/16).
The symbol “9”
indicates which
picture’s sound is
being received.
The symbol “b” or
“B” indicates which
or input source can
be changed.
Press (OFF) to close the window picture.
TV channel or
input-source
mode for the
Main
picture
POSITION
6
main picture (It
will dim in
about 3
seconds.)
Press to change the location of the window picture
(counterclockwise) around the main picture.
10
TV channel or
input-source
mode for the
ACTIVE
Window picture
window picture
(It will dim in
about 3
Press to select either the main or window picture in
order to change the TV channel or video source
using the white labeled buttons below. The symbol
“b” (or “B”) will appear to indicate which
seconds.)
picture’s channel or input mode can be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
AUDIO
— (white labeled button)
Press to cancel the PIP function and return to
normal viewing.
To change the location of the window picture,
move the joystick in any direction and release it
when the picture is in the desired location.
Press to alternate sound between the main picture
and the window picture. The symbol “9” will
appear for a few seconds to indicate which
picture’s sound is being received.
Notes:
• If one of the pictures received through PIP is snowy,
the entire screen may become unstable. In this case,
erase the snowy channel. (see “CHANNEL SKIP”
on page 41)
TV/VIDEO
— (white labeled button)
FREEZE
Press repeatedly to scroll through the available
video inputs for the picture on which the symbol
“b” (or “B”) is displayed. (see “TV/VIDEO” on
page 27)
• If you select VIDEO 5 when the main picture is
active, the window picture disappears and you
can view the picture from VIDEO 5 (DTV) IN.
When the window picture is active, you cannot view
the picture from VIDEO 5 (DTV) IN.
This is useful when you need to copy down
information that appears on the TV’s screen.
Press to freeze the main and window pictures.
Press again to resume PIP viewing. Press (OFF)
CH
to cancel and resume normal TV viewing.
JUMP
or
or
-
0
9
and ENTER
SWAP
— (white labeled button)
Press to switch the audio and video of the main
picture and the window picture.
Press to select the TV channel on which the
symbol “b” (or “B”) is displayed. (for details, see
“Watching the TV” on page 26)
Each time you press SWAP, the picture and sound
of the two will be exchanged.
ANT
— (white labeled button)
Press to access CHANNEL INDEX for direct
channel selection. (see “Using CHANNEL
INDEX” on page 33)
Press to change between the VHF/UHF input and
the AUX input for the picture on which the symbol
“b” (or “B”) is displayed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving the joystick right or left will activate the
same function.
Using the yellow labeled buttons
for P&P operations
Watching Two
Programs at One Time
— P&P (Twin View™)
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE FRONT
COVER OF THIS MANUAL AS YOU REVIEW THE
FOLLOWING DESCRIPTIONS
The Picture-and-Picture (P&P) feature allows you
to view two channels simultaneously, both in a
reduced size screen. The main picture will appear
on the right.
LEFT
Tip z
If you press RESET in P&P mode, the right and left
pictures will be reset to the same size (factory-preset
size.)
You can change the size of both pictures to suit
your personal preference.
RIGHT
Note:
• The P&P feature is not available for the inputs
from VIDEO 5 (DTV) IN.
Press to display right (main) and left pictures.
Press (OFF) to close the sub picture.
The symbol “b”
The symbol
“9” indicates
which
or “B” indicates
which picture’s
TV channel or
input source can
be changed.
ACTIVE
TV channel
or input-
source
ZOOM IN
or
LEFT
RIGHT
picture’s
sound is
being
Press to select either the right or left picture in
order to change the TV channel or video source
using the white labeled buttons below. The symbol
“b” (or “B”) will appear to indicate which
mode for the
sub picture
(It will dim in
about 3
— (white labeled button)
received.
Press and hold either RIGHT or LEFT to zoom in
on the selected picture.
Release at the desired size. The other picture will
be zoomed out simultaneously.
TV channel or
input-source
mode for the
main picture (It
will dim in
about 3
seconds.)
seconds.)
picture’s channel or input mode can be changed.
6
7
TV/VIDEO
— (white labeled button)
Sub
picture
Press repeatedly to scroll through the available
video inputs for the picture on which the symbol
“b” (or “B”) is displayed. (see “TV/VIDEO” on
page 27)
Main picture
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SWAP
CH
Note:
JUMP
• The CHANNEL INDEX feature is not available
for the inputs from VIDEO 5 (DTV) IN.
or
or
-
0
9
Press to switch the audio and video of the right and
left pictures.
and ENTER
1 Press
.
Each time you press SWAP, the picture and sound
of the two will be exchanged.
— (white labeled button)
The current channel will be reduced in size and
displayed in the center of the screen in normal
motion picture format. The first twelve
receivable channels will appear one after
another, clockwise, around the center picture.
These small pictures are updated in intervals of
one second. The channel number and channel
caption (if set) on the second and later
appearances will dim.
Press to select the TV channel on which the
symbol “b” (or “B”) is displayed. (for details, see
“Watching the TV” on page 26)
OFF
Press to cancel the P&P function and return to
normal viewing.
ANT
— (white labeled button)
Notes:
• If one of the pictures received through P&P is
snowy, the entire screen may become unstable. In
this case, erase the snowy channel. (see
“CHANNEL SKIP” on page 41)
Press to change between the VHF/UHF input and
the AUX input for the picture on which the symbol
“b” (or “B”) is displayed.
10
• If you select VIDEO 5 when the right picture is
active, the left picture disappears and you can view
the picture from VIDEO 5 (DTV) IN. When the left
picture is active, you cannot view the picture from
VIDEO 5 (DTV) IN.
AUDIO
Press to alternate sound between the right and left
pictures. The symbol “9” will appear for a few
seconds to indicate which picture’s sound is being
received.
A cyan-colored frame will appear to indicate
current channel selection.
2 Move the joystick in any direction to move the
Using CHANNEL
INDEX
cyan frame to the picture that you wish to view,
and press
.
FREEZE
You can use the CHANNEL INDEX feature to
display multiple channels and select one directly.
This is useful when you need to copy down
information that appears on the TV’s screen.
R
e
o
c
i
i
p
e
f
l
u
r
-
-
-
-
2
1
1
1
s
s
b
u
a
u
g
a
-
r
-
-
-
/
/
2
2
l
t
-
r
-
-
-
-
-
t
t
e
-
Channels used for CHANNEL INDEX will come
directly from the TV’s list of receivable channels
(those set during AUTO PROGRAM or through
the CHANNEL SET UP menu).
Press to freeze both the right and left pictures.
Press again to resume P&P viewing or press
(OFF) to cancel and resume normal TV viewing.
(continued)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you leave the CHANNEL INDEX screen
displayed for an hour without any additional
operation, CHANNEL INDEX is canceled and the
normal picture reappears.
The selected channel will zoom in and move to
the center, and the sound of that channel will
be heard.
Usingthewhitelabeledbuttonsfor
center picture operations
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE FRONT
COVER OF THIS MANUAL AS YOU REVIEW THE
Using the yellow labeled buttons
for CHANNEL INDEX operations
R
e
o
c
f
l
u
s
s
b
u
a
u
g
l
t
-
-
-
-
t
r
-
-
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE FRONT
COVER OF THIS MANUAL AS YOU REVIEW THE
FOLLOWING DESCRIPTIONS
TV/VIDEO
3 If you wish to view another channel, repeat
step 2.
Press to scroll the center picture through the video
inputs.
To view the normal picture of the selected
channel, proceed to step 4.
The surrounding channels will not change.
4 Press
.
Press to display the next twelve receivable
channels.
The center picture will be enlarged for normal
viewing.
ANT
Press to switch the center picture between the
VHF/UHF input and the AUX input.
OFF
Press to cancel the current operation and return to
normal TV viewing.
CH
JUMP
or
or
-
0
9
FREEZE
Notes:
and ENTER
• You cannot move the cyan frame until all of the
surrounding pictures appear.
Press to freeze the center picture.
Press to select a channel for the center picture. (for
details, see “Watching the TV” on page 26)
• The projection TV will continually update each of
the surrounding pictures while the CHANNEL
INDEX screen is displayed.
Press again to cancel the frozen picture and resume
normal center picture viewing.
• Sound will only be heard from the center picture.
• If one of the pictures received through CHANNEL
INDEX is snowy, the entire screen may become
unstable. In this case, erase the snowy channel. (see
“CHANNEL SKIP” on page 41)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Move the joystick up or down to highlight the
5 Move the joystick up or down to make your
selection and press to activate it.
Adjusting Your SET UP
(menus)
desired option.
SET UP
PARENTAL CONTROL
The previous screen will reappear.
CAPTION VISION:
CC1
SELECT OUT: MONITOR
LANGUAGE:
VIDEO LABEL
DIRECT PLAY
FREEZE MODE: NORMAL
DTV INPUT: Y PB PR
ENGLISH
SET UP
PARENTAL CONTROL
CAPTION VISION:
SELECT OUT:
LANGUAGE:
VIDEO LABEL
DIRECT PLAY
CC1
VIDEO1
ENGLISH
Learning Menu
Selection
MENU
Move
Select
Exit
FREEZE MODE: NORMAL
DTV INPUT: Y PB PR
Use the MENU button to access a menu and use
the joystick to alter the settings. Use the following
example to learn how to modify settings.
4 Press
joystick).
(press down on the center of the
MENU
Move
Select
Exit
Options for your selection (Pop-up menu or
Adjusting menu) will be displayed.
Some adjustment menus may require further
operations. For details, see each menu option.
1 Press the MENU button.
The main menu appears.
VIDEO
Pop-up menu
SET UP
To return to the previous screen (except for the
PARENTAL CONTROL
CAPTION VISION
MODE :
PICTURE
VIVID
slider adjustment menus), choose
bottom of the menu and press
joystick left.
at the
or move the
CC1
BRIGHTNESS
SELECT OUT: MONITOR
MENU
LANGUAGE:
COLOR
VIDEO1
VIDEO2
VIDEO3
HUE
VIDEO LABEL
DIRECT PLAY
SHARPNESS
COLOR TEMP :
NR :
COOL
OFF
OFF
FREEZE MODE
VIDEO4
DTV INPUT:
TVOUT
DYNAMIC PICTURE :
6 Once you have completed all menu
corrections, press MENU to exit the menu
screens.
MENU
Exit
MENU
Move
Select
Move
Select
Exit
2 Move the joystick up or down to highlight the
desired menu and press (press down on the
Adjusting menu
VIDEO LABEL
MENU
VIDEO1:
VIDEO2:
VIDEO3:
VIDEO4:
VIDEO5:
VIDEO1
VIDEO2
VIDEO3
VIDEO4
VIDEO5
center of the joystick) to activate it.
SET UP
PARENTAL CONTROL
CAPTION VISION:
SELECT OUT: MONITOR
LANGUAGE:
VIDEO LABEL
DIRECT PLAY
CC1
To exit from the menus at any time
Press MENU.
MENU
Move
Select
Exit
ENGLISH
FREEZE MODE: NORMAL
DTV INPUT: Y PB PR
MENU
Move
Select
Exit
You may also move the joystick right to
activate your selection.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVID:
COLOR
Using the VIDEO
Select for enhanced picture contrast and sharpness.
— Picture Adjustment
Menu
Adjust slider right (up) to increase color intensity.
STANDARD:
Select to display a standard picture for normal
viewing environments.
Adjust slider left (down) to decrease color
intensity.
VIDEO
MODE :
VIVID
PICTURE
BRIGHTNESS
COLOR
Sliders
MOVIE:
HUE
}
HUE
SHARPNESS
COLOR TEMP :
NR :
light environments.
COOL
OFF
OFF
— Picture Adjustment
DYNAMIC PICTURE :
Adjust slider right (up) to increase the green tones.
Adjust slider left (down) to increase the red tones.
MENU
Move
Select
Exit
GAME:
Select to display graphics such as a video game.
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
PRO (Professional):
Select to display a picture with minimum
enhancements.
SHARPNESS
— Picture Adjustment
Adjust slider right (up) to sharpen the picture.
Adjust slider left (down) to soften the picture.
To select the VIDEO
menu:
Select
Press PICTURE MODE on the remote control for
direct selection of a MODE setting.
Display
,
Highlight
,
COLOR TEMP
— White Intensity (Color Temperature)
Adjustment
PICTURE
— Picture Adjustment
MENU
COOL:
Adjust slider right (up) to increase picture contrast.
Select to give the white colors a blueish tint.
Adjust slider left (down) to decrease picture
contrast.
NEUTRAL:
Select to give the white colors a neutral tint.
MODE
— Customized picture viewing
BRIGHTNESS
— Picture Adjustment
WARM:
Select to give the white colors a reddish tint.
You can choose one of five different video modes
that best suits the program you are watching. You
can also adjust the picture quality (such as
BRIGHTNESS, COLOR, etc.) for each MODE to
suit your taste.
Adjust slider right (up) to brighten the picture.
Adjust slider left (down) to darken the picture.
First select each MODE individually before
adjusting the picture quality.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust slider left (down) to decrease low pitched
sounds.
NR
Using the AUDIO
— Picture Noise Reduction
Menu
Select ON to reduce picture noise.
BALANCE
— Sound Adjustment
Select OFF to cancel the feature.
AUDIO
TREBLE
BASS
BALANCE
MTS :
SPEAKER :
EFFECT:
Adjust slider right (up) to emphasize right speaker
volume.
Sliders
}
NR can be set separately from the MODE settings
of the VIDEO menu.
STEREO
ALL ON
OFF
Adjust slider left (down) to emphasize left speaker
volume.
SURROUND LEVEL
DYNAMIC PICTURE
— Black Intensity Adjustment
MENU
Move
Select
Exit
MTS
Select ON to emphasize the black level and to
produce a bolder dynamic picture.
— Enjoy stereo, bilingual and mono
programs
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
Select OFF to cancel the feature.
STEREO:
Select for stereo reception when viewing a
program broadcast in stereo.
To restore the factory settings
To select the AUDIO
menu:
Select
Press RESET on the remote control while the
VIDEO menu is selected. To restore each MODE
to the factory setting, press RESET after selecting
the mode to be reset.
SAP:
Display
,
Highlight
,
Select to listen to a bilingual broadcast. (non-SAP
programs will be muted when this feature is
selected)
MENU
MONO:
Select for mono reception. (use to reduce noise
during stereo broadcasts)
TREBLE
— Sound Adjustment
Quick MTS access:
Press MTS on your remote control to cycle through
the MTS options as follows: (STEREO b SAP b
MONO b STEREO).
Adjust slider right (up) to increase high pitched
sounds.
Adjust slider left (down) to decrease high pitched
sounds.
Note:
• The MTS function is not available for input
from an external equipment connected VIDEO
1, VIDEO 2, VIDEO 3, VIDEO 4 or VIDEO 5
(DTV) IN.
BASS
— Sound Adjustment
Adjust slider right (up) to increase low pitched
sounds.
(continued)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
; 3 STEREO:
SPEAKER
Adjusting the Speaker Volume
for Customized Surround
Mode
Produces a dynamic three dimensional sound
without using the rear speakers. The sound of the
rear channel is output from the front speakers.
— Custom selection of audio output source
ALL ON:
Select to listen to the sound from the projection
TV speakers alone.
After you set EFFECT to one of the modes, adjust
the volume of the front, center and rear speakers to
the same level so that the projection TV’s sound
will be even and natural. For ;PRO LOGIC and
;3 STEREO, adjust the speaker volume using
the test tone feature.
SRS 3D MONO:
Adds a surround-like effect to mono programs.
L/R OFF:
LIVE:
Select to turn off the projection TV left and right
speakers and listen to the left and right channel
sounds through a separate audio system’s speakers.
Produces surround effects with the atmosphere of a
concert hall.
ALL OFF:
GAME:
Adjusting the speaker volume
Select to turn off the projection TV speakers and
listen to the projection TV’s sound only through an
external audio system’s speakers.
Produces maximum audio impact. Most effective
for video games.
1 Connect the rear speakers (not supplied).
For details, see “Mounting the Rear Speakers
(not supplied)” on pages 6 and 7.
OFF:
CENTER IN:
Normal stereo or mono reception.
Select to use the projection TV center speaker as
center speaker when you connect an amplifier with
a Dolby Pro Logic decoder. (see “Connecting an
Amplifier That Supports Dolby Pro Logic
Decoder” on page 22)
2 Select SURROUND LEVEL from the AUDIO
menu. (see “SURROUND LEVEL” on the left
column)
SURROUND LEVEL
— Speaker volume adjustment for
surround modes
;PRO-LOGIC
CENTER
REAR
After selecting one of the surround modes, adjust
the volume of each speaker so that the sound will
be even and natural. (see “Adjusting the Speaker
Volume for Customized Surround Mode” on the
right column)
BALANCE
TEST TONE :
OFF
MENU
EFFECT
— Customizes surround sound effects
based on the program’s audio type
Move
Select
Exit
EFFECT can only be set when SPEAKER is set to
ALL ON or L/R OFF.
To restore the factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
However, EFFECT is not reset to the factory
setting even if you press RESET.
; PRO LOGIC:
Produces superb theater-like surround effects.
Most effective for programs encoded in Dolby
surround.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Move the joystick up or down to select the
Adjusting the speaker volume
using the test tone
The TEST TONE feature makes it easier to adjust
the volume level. You can use this feature for
;PRO LOGIC and ;3 STEREO modes only.
Using the TIMER
speaker for volume adjustment and press
.
Menu
;PRO-LOGIC
CENTER
REAR
TIMER
DAYLIGHT SAVING:
CURRENT TIME
ON / OFF TIMER
NO
BALANCE
TEST TONE :
OFF
MENU
1 With the SURROUND LEVEL window open,
move the joystick up or down to select TEST
TONE and press
.
Move
Select
Exit
– – : – – A M
Select
MENU
Move
Exit
;PRO-LOGIC
CENTER
REAR
BALANCE
TEST TONE :
CENTER: Select to adjust the level of the
center speaker. (not available for SRS 3D
MONO)
After setting the clock you can use the timer to
turn the projection TV on and off.
ON
OFF
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
REAR: Select to adjust the level of the rear
speakers. (not available for ;3 STEREO)
MENU
Move
Select
Exit
BALANCE: Select to adjust the balance
between the right and left speakers.
To select the TIMER
menu:
2 Move the joystick up or down to select ON.
4 Move the joystick up, down, left or right to
A test tone will be output from each speaker in
sequence:
adjust the volume level and press
.
Display
,
Highlight
, Select
MENU
5 Use the joystick to select other speakers and to
Front left t Center t Front right t Rear
adjust the volume levels.
To turn off the test tone, select OFF.
3 Follow steps 2 through 4 in “Adjusting the
Tip z
speaker volume.”
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
Note:
You can adjust the volume using the test tone
independent of the projection TV’s operation.
(continued)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DAYLIGHT SAVING
ON/OFF TIMER
Using the WIDE
SCREEN MODE Menu
WIDE SCREEN MODE
— Automatically adjusts the time.
— Wake up or scheduled viewing.
Select YES to compensate for Daylight Saving
Time in spring. The current time automatically
moves ahead one hour.
1 Select the desired timer
(1 or 2).
ON / OFF TIMER
1.
2.
––––––
–– : –– AM
H
H
ch
ch
–
–
–––
AUTO WIDE :
WIDE MODE :
V CENTER :
ON
ZOOM
0
2 Move the joystick up or
down until the desired
day (MON-SUN) or
––––
–– : –– AM
–––
Select NO at the end of Daylight Saving Time in
fall. The current time moves back one hour.
SUN 12 : 00AM
Move Select
MENU
Exit
range of days (EVERY
SUN-SAT or EVERY MON-FRI) is displayed,
and press
CURRENT TIME
— Necessary for the TIMER.
.
MENU
Move
Select
Exit
3 Move the joystick up or down until the time
(hours and minutes) that you want the
projection TV to remain on is displayed, and
CURRENT TIME
1 Press , then move the
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
joystick up or down
–– : ––AM
–––
until the current day
(MON-SUN) is
then press
.
displayed, and press
.
4 Move the joystick up or down to set the time
MENU
To select the WIDE SCREEN MODE
menu:
Move
Select
Exit
duration (maximum of 6 hours) and press
.
2 Move the joystick up or
down until the current hour (1-12) and AM/PM
is displayed, and press
3 Move the joystick up or down until the current
minute (00-59) is displayed, and press
The Clock has now started. Press MENU to exit.
5 Move the joystick up or down to select the
.
desired channel and press
.
Display
,
Highlight
, Select
The timer is now set. The TIMER/STAND BY
indicator on your projection TV will be lit.
.
MENU
Press MENU to exit. To cancel your timer setting,
select timer 1 or 2 and press RESET while in the ON/
OFF TIMER window. Performing AUTO PROGRAM
will erase all TIMER settings.
AUTO WIDE
— Automatically selects the wide screen
mode
Select ON to automatically display the picture
with an ID-1 (aspect ratio recorded) signal of 480i
format in an optimum wide screen mode; normal
4:3 picture in NORMAL, letterbox picture in
ZOOM, and 4:3 squeezed picture in FULL. (for
details, see pages 28 and 29)
Select OFF if you want to choose the wide screen
40
Download from Www.Somanuals.com. All Manuals Search And Download.
mode manually by pressing the WIDE MODE
button repeatedly.
1 Move the joystick up or down to select the
desired channel. You can view the channel that
is selected with the CHANNEL SKIP menu in
the center sub screen. You can also use CH +/–
or 0–9 and ENTER buttons.
Using the CHANNEL
SET UP Menu
WIDE MODE
— Manually selects the wide screen mode
CHANNEL SET UP
CHANNEL SKIP
2 Press
.
You can select NORMAL, WIDE ZOOM, ZOOM
or FULL for the 4:3 or letterbox picture to fill the
16:9 screen manually by pressing the WIDE
MODE button repeatedly. (for details on each
mode, see “Watching the Picture in Wide Screen
Mode Automatically — AUTO WIDE” on page
28)
CHANNEL CAPTION
CABLE :
ON
3 Move the joystick up or down to select YES,
AUTO PROGRAM
FAVORITE CHANNEL : AUTO
and press
.
CHANNEL FIX :
OFF
The selected channel will be erased.
If you want to re-enter the skipped channel, follow
the steps above and select NO.
MENU
Move
Select
Exit
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
CHANNEL CAPTION
— Easy recognition of the channel you are
watching
V CENTER
— Adjusts the position of the picture
You can add a caption for
CHANNEL CAPTION
Allows you to move the picture vertically within
the screen (available only in ZOOM and WIDE
ZOOM modes).
To select the CHANNEL SET UP
menu:
CHANNEL :
CAPTION :
– – –
– – – –
up to 32 channels of both
VHF/UHF and AUX
inputs.
Move the joystick up or down to move the picture,
Display
,
Highlight
, Select
and press
.
With the CHANNEL
CAPTION window open:
MENU
MENU
Move
Select
Exit
1 Press
and then move the joystick up or
down to select the desired channel. You can
view the channel that is selected with the
CHANNEL CAPTION menu in the center sub
screen.
CHANNEL SKIP
— Skips unnecessary channels
2 Press
.
After AUTO SET UP, you
can erase unnecessary TV
channels from the channel
preset memory.
CHANNEL SKIP
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
NO
NO
NO
NO
NO
NO
NO
NO
3 Move the joystick up or down to display the
first letter or number of the caption and press
to select it.
4 Repeat until up to four digits are selected.
With the CHANNEL SKIP
window open:
Select a channel
MENU
Move
Select
Exit
5 Press
.
To erase a caption, press RESET.
(continued)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE
CHANNEL FIX
Setting and Selecting
FAVORITE CHANNEL
— Cable system setting
— Locks selection of your projection TV’s
input when used in conjunction with
external equipment such as a cable box, AV
receiver, etc.
Select ON if your projection TV is connected to a
cable system.
The FAVORITE CHANNEL feature of your
projection TV enables easy access to the eight
channels that you preset (or the last channel that
you were watching).
Select OFF if your projection TV is connected to
an antenna.
2-6:
When the cable box is connected to the VHF/UHF
channels between 2 and 6. Press SAT/CABLE
(FUNCTION) and then CH +/– to change the
cable box channels.
AUTO SET UP will set CABLE to ON
automatically.
Your FAVORITE CHANNEL options can be set
automatically or manually.
AUTO PROGRAM
— Automatic channel presetting
The factory setting for FAVORITE CHANNEL is
AUTO.
AUX 2-6:
Select YES to signal the projection TV to
automatically program all receivable TV channels.
When all the receivable channels are stored, the
lowest numbered channel is displayed.
Use this when a cable box is connected to AUX,
and a cable or antenna is connected to VHF/UHF.
When FAVORITE CHANNEL is set to AUTO, the
last eight channels selected with the 0–9 buttons
will be set as FAVORITE CHANNEL options. If
you want to input your own selections as
FAVORITE CHANNEL settings, set to
MANUAL.
VIDEO 1:
Use this when you have connected external video
equipment (e.g. AV receiver) and you want the
projection TV’s input fixed to it.
Select NO to cancel AUTO PROGRAM.
FAVORITE CHANNEL
— User’s favorite channels
OFF:
Note:
When you want to switch CHANNEL FIX off.
• You can not use the FAVORITE CHANNEL
when watching the signal input from VIDEO 5
(DTV) IN.
The FAVORITE CHANNEL feature enables easy
access to the eight channels that you preset (or the
last channel that you were watching).
(for details on how to set up this feature, see
“Setting and Selecting FAVORITE CHANNEL”
on this page.)
If the projection TV is in the AUX mode when you
turn CHANNEL FIX off, press ANT to return to
UHF input mode.
TIMER settings are erased when CHANNEL FIX is
set.
Note:
• You cannot change channels with the TV’s tuner
when you set CHANNEL FIX. If you want to use
the TV’s tuner while fixing the TV’s input to
VIDEO 1, use the SET UP menu to set SELECT
OUT to TV OUT. (see “SELECT OUT” on page
45)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Move the joystick up or down to select a
position (1–8), and press
Setting FAVORITE CHANNEL
manually
Resetting FAVORITE
CHANNEL choices
.
FAVORITE CHANNEL
1 Select FAVORITE CHANNEL from the
You have the option of returning to the FAVORITE
CHANNEL screen to adjust any of your favorite
channel choices.
1 .
2 .
1
2
CNN
CHANNEL SET UP menu. (see page 41)
3 . 10 SPTN
4 . 22
5 . 30
6 . 40
7 . 52
CHANNEL SET UP
CHANNEL SKIP
CHANNEL CAPTION
CABLE :
Simply proceed as described in “Setting
FAVORITE CHANNEL manually” (skip step 2 if
MANUAL is already selected).
ON
AUTO PROGRAM
FAVORITE CHANNEL : AUTO
Select a channel
MENU
Move
Select
Exit
CHANNEL FIX :
MANUAL
When you reach step 3, select the position you
want to change and press . Press RESET to
clear the channel for that position.
MENU
Move
Select
Exit
4 Move the joystick up or down to select a
channel.
2 Move the joystick up or down to select
MANUAL and press
You have now selected a favorite channel.
FAVORITE CHANNEL
.
_ _ _
2
1 .
2 .
3 . 10 SPTN
4 . 22
5 . 30
6 . 40
7 . 52
The FAVORITE CHANNEL menu will appear.
If you set CHANNEL CAPTION names (e.g.
CNN, HBO), they will also be displayed. (see
“CHANNEL CAPTION” on page 41)
1
2
3
4
5
6
7
8
.
.
.
.
.
.
.
.
1
CNN
125
10 SPTN
22
30
40
52
8 . 125
125
Select a channel
Select
Move
a
channel
Select
MENU
Exit
MENU
Move
Select
Exit
FAVORITE CHANNEL
Move the joystick up or down to select a new
channel.
Press MENU when you are done.
1 .
2 .
1
2
CNN
5 Press
and use the joystick to program other
3 . 10 SPTN
4 . 22
5 . 30
6 . 40
7 . 52
favorite channels. (Follow steps 3 and 4.)
6 Press MENU when you have finished.
Your favorite channels are now ready for use.
8 . 125
Note:
Select a position
MENU
Move
Select
Exit
• The FAVORITE CHANNEL feature is not
available for the picture input from AUX or
VIDEO 5 (DTV) IN.
(continued)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press
to select the channel.
Using FAVORITE CHANNEL
Using the SET UP
The selected channel will be displayed for
normal viewing.
You can use the FAVORITE CHANNEL feature to
directly select the channel you want to watch.
Menu
SET UP
PARENTAL CONTROL
CAPTION VISION:
CC1
MONITOR
ENGLISH
1 Press
once.
SELECT OUT:
LANGUAGE:
VIDEO LABEL
DIRECT PLAY
FREEZE MODE: NORMAL
DTV INPUT:
The favorite channel menu and a window
picture will be superimposed over the current
channel. The window picture displays the
channel selected from the menu.
Y PB PR
MENU
Exit
Move
Select
To cancel the favorite channel menu before
selecting a channel, move the joystick up or down
to select EXIT at the bottom of the menu and press
.
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
FAVORITES
12 CNN
36 ESPN
50
60
70
80
90
120 MTV
To select the SET UP
menu:
EXIT
Display
,
Highlight
, Select
2 Move the joystick up or down to select the
channel that you wish to view from the menu.
MENU
The picture of the selected channel will be
displayed in the window picture.
PARENTAL CONTROL
— Blocks programs unsuitable for children
FAVORITES
12 CNN
36 ESPN
50
60
70
80
90
Allows you to block TV programs that you feel are
unsuitable for your children.
120 MTV
EXIT
(see “Using the PARENTAL CONTROL Feature”
on page 47 for details)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
If you select TV OUT, the following pop-up menu
appears.
CAPTION VISION
SELECT OUT
— Output signal selection from SELECT
OUT
— Television closed caption display
Select YES only if you
SET UP
PARENTAL CONTROL
Some programs are
broadcast with Caption
Vision.
To display Caption Vision,
select [CC] 1, [CC] 2, [CC]
3, [CC] 4, TEXT1,
TEXT2, TEXT3 or TEXT4 from the menu. Then
press the [CC] button until Caption Vision is
displayed.
SET UP
PARENTAL CONTROL
CAPTION VISION
SELECT OUT:MONITO
LANGUAGE: ENGLISCC3
VIDEO LABEL
DIRECT PLAY
FREEZE MODE:NORMTEXT2
You can select the desired
output signal from the
SELECT OUT jacks at the
rear of the projection TV.
CAPTION VISION:
SELECT OUT:
LANGUAGE:
VIDEO LABEL
DIRECT PLAY
FREEZE MODE
DTV INPUT:
CC1
MONITOR
VIDEO1
VIDEO2
VIDEO3
VIDEO4
SET UP
PARENTAL CONTROL
CC1
CC2
have connected an AV
receiver, with no other
equipment, to your
projection TV. You can
always select the signal
from the receiver by
CAPTION VISION
CC1
MONITOR
LANGUAGE: E
CC4
TEXT1
SELECT OUT:
VIDEO1
VIDEO2
VIDEO3
VIDEO LABEL
DIRECT PLAY
FREEZE MODE
TEXT3
TV OUT
DTV INPUT:
Y PB
TEXT4
MENU
Exit
Set up using
YES
VIDEO4
only VIDEO1 input?
NO
DTV INPUT:
TV OUT
MENU
Exit
MENU
Move
Select
Exit
Move
Select
Move
Select
pressing TV/VIDEO once.
Note:
Select NO if you have connected multiple
• SELECT OUT setting is not available for the
inputs from VIDEO 5 (DTV) IN.
components to your projection TV. You can select
an input (VIDEO1 – VIDEO4) with the TV/
VIDEO button.
[CC] 1, [CC] 2, [CC] 3 or [CC] 4displays a printed
version of the dialogue or sound effects of a
program. (The mode should be set to [CC] 1 for
most programs.) TEXT1, TEXT2, TEXT3 or
TEXT4 displays network/station information
presented using either half or the whole screen.
MONITOR:
Select to edit tapes while monitoring. SELECT
OUT outputs the picture displayed on the screen.
Note:
• The SELECT OUT signal is only available when
the projection TV is on.
VIDEO1–VIDEO4:
Note:
Select to edit tapes while viewing an input image
different from that being recorded. SELECT OUT
outputs the signal input to the projection TV
regardless of the displayed picture on the screen.
• Poor reception of TV programs can cause errors in
Caption Vision and XDS.
Captions may appear with a white box or other
errors instead of the intended text.
LANGUAGE
— User’s preferred language
Select from available languages (ENGLISH or
ESPAÑOL) to display all menus in your language
of choice.
TV OUT:
Select if you connect an AV receiver to VIDEO 1
IN. SELECT OUT outputs the signal that the TV is
tuned to, regardless of the displayed picture. (see
“Connecting an AV Receiver” on page 20 for
connection)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO LABEL
— Easy recognition of connected
equipment (e.g. SAT, VHS, etc.)
DIRECT PLAY
FREEZE MODE
— Easy operation of a connected VCR
— Freeze picture mode
This feature allows you to
switch the input mode from
the TV to a Sony VCR
(MDP or DVD) and start
playing by only pressing
the N (playback) button
on the remote control. You have to set the AV 1/2/
3/DVD/MDP switch on the remote control (e.g.,
you connect your VCR to the VIDEO 3 IN jacks
and set the AV 1/2/3/DVD/MDP switch to VTR 3).
With the DIRECT PLAY window open:
DIRECT PLAY
Useful when you need to copy down information
that appears on the TV’s screen.
VIDEO1:
VIDEO2:
VIDEO3:
VIDEO4:
OFF
OFF
OFF
OFF
This feature allows you to
VIDEO LABEL
VIDEO1:
VIDEO2:
VIDEO3:
VIDEO4:
VIDEO5:
VIDEO1
VIDEO2
VIDEO3
VIDEO4
VIDEO5
label each input mode so
that you can easily identify
the connected equipment
(e.g. you can label VIDEO
1 IN as VHS).
Note:
1
2
3
DVD/MDP
• The FREEZE MODE feature is not available for
the inputs from VIDEO 5 (DTV) IN jacks.
MENU
Move
Select
Exit
MENU
Move
Select
Exit
NORMAL:
With the VIDEO LABEL window open:
Select to freeze the whole picture on the screen by
pressing FREEZE.
1 Move the joystick up or down to select the input
mode you want to label and press
.
Recipe
VIDEO LABEL
1 Move the joystick up or down to select the input
to which your video equipment is connected,
flour - - - - 2
sugar - - - 1/2
salt - - - - -1/2
butter - - - 1
VIDEO1:
VIDEO2:
VIDEO3:
VIDEO4:
VIDEO5:
VIDEO1
VHS
8mm
BETA
LD
SAT
DVD
and press
.
DIRECT PLAY
AV RECEIVER
SKIP
VIDEO1:
VIDEO2:
VIDEO3:
VIDEO4:
MENU
OFF
AV1
AV2
Move
Select
Exit
AV3
DVD/MDP
The current picture freezes.
TWIN:
2 Move the joystick up or down to select the label
and press
1
2
3
DVD/MDP
.
MENU
Move
Select
Exit
VIDEO LABEL Options:
VIDEO 1: VIDEO 1, VHS, 8mm, BETA, LD,
SAT, DVD, AV RECEIVER, SKIP
Select to freeze the desired scene and display it on
the left of the screen while viewing the normal
picture of the current channel on the right by
pressing FREEZE.
2 Move the joystick up or down to select the
position of the AV 1/2/3/DVD/MDP switch, and
press
.
VIDEO 2–4: VIDEO 2–4, VHS, 8mm, BETA,
LD, SAT, DVD, SKIP
Note:
VIDEO 5: VIDEO 5, DTV, DVD, SKIP
• DIRECT PLAY setting is not available for the
inputs from VIDEO 5 (DTV) IN.
If you select SKIP, your projection TV will skip this
connection when you scan through video sources
using the TV/VIDEO button.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
This mode is not available for PIP, P&P or CH
INDEX screens.
2 Enter a four digit password* using the 0–9
Using the PARENTAL
CONTROL Feature
buttons.
SET UP
PARENTAL CONTROL
CAPTION VICONFIRM
6
Frozen
picture
Normal
motion
picture
PASSWORD
SELECT OU
The TV programs and movies shown on TV are
given a rating signal based on the following rating
systems: Television Parental Guidelines to rate
television programs (TV ratings), and Motion
Picture Association of America (MPAA)
Guidelines to rate movies including those shown
on TV (movie ratings)
_ __ _
LANGUAGE
Recipe
VIDEO LABEL
DIRECT PLAY
FREEZE MODE:NORMAL
flour
sugar
salt
butter
-
-
-
-
-
-
-
2
1/2
-
-
-
-
-1/2
- 1
-
-
DTV INPUT:
Y PB PR
Confirm password
MENU
Move
Exit
* Do not enter “4357” corresponding to “HELP”
on a phone number pad. (see page 52)
Press FREEZE again or press (OFF) to display
the normal picture.
3 To confirm the password, re-enter the same
Note:
password with the 0–9 buttons.
DTV INPUT
–– Input signal selection from the DTV
receiver
• The PARENTAL CONTROL feature is not
available for the inputs from VIDEO 5 (DTV) IN.
Your password is stored and the PARENTAL
CONTROL menu automatically appears.
Select Y PB PR when you connect a DTV
receiver to the Y/PB/PR jacks of VIDEO 5 (DTV)
IN.
If you want to change the password, see page
51.
Activating the PARENTAL
CONTROL feature
PARENTAL CONTROL
PARENTAL LOCK: OFF
Select R.G.B when you connect a DTV receiver to
the G/B/R/HD/VD jacks of VIDEO 5 (DTV) IN
on the rear of the projection TV.
First, set a password, then select your desired
rating from Sony’s predetermined ratings.
RATING:
CHILD
CHANGE PASSWORD
1 Select PARENTAL CONTROL from the SET
UP menu. (see page 44)
MENU
Move
Select
Exit
SET UP
PARENTAL CONTROL
SET NEW
CAPTION VI
PASSWORD
4 Make sure that PARENTAL LOCK is
SELECT OU
_ __ _
LANGUAGE
highlighted, and press
.
VIDEO LABEL
DIRECT PLAY
FREEZE MODE:NORMAL
DTV INPUT:
Y PB PR
PARENTAL CONTROL
PARENTAL LOCK: ON
Use [0-9] to enter
password
Move
Exit
OFF
C
RATING:
MENU
CHANGE PASSWORD
MENU
Move
Select
Exit
(continued)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Move the joystick up or down to select ON,
and press
3 Move the joystick up or down to select
To deactivate the PARENTAL
CONTROL feature
.
PARENTAL LOCK, and press
.
If you set PARENTAL LOCK in the PARENTAL
CONTROL menu to OFF, the PARENTAL
CONTROL feature will be canceled and you can
view all TV programs and movies shown on TV.
PARENTAL CONTROL
PARENTAL LOCK: ON
PARENTAL CONTROL
PARENTAL LOCK: ON
OFF
C
RATING:
CHANGE PASSWORD
RATING:
CHILD
CHANGE PASSWORD
1 Select PARENTAL CONTROL from the SET
MENU
Move
Select
Exit
MENU
Move
Select
Exit
UP menu. (see page 44)
4 Move the joystick up or down to select OFF,
and press
SET UP
PARENTAL CONTROL
CAPTION VIPASSWORD
SELECT OU_ __ _
LANGUAGE:ENGLISH
VIDEO LABEL
.
6 Move the joystick up or down to select
RATING, and press
.
PARENTAL CONTROL
PARENTAL LOCK: OFF
DIRECT PLAY
FREEZE MODE:NORMAL
RATING:
CHILD
DTV INPUT:
Use [0-9] to enter
password
Y PB PR
CHANGE PASSWORD
PARENTAL CONTROL
PARENTAL LOCK: ON
MENU
Move
Exit
RATING:
CHILD
CHANGE YOUTH
YOUNG ADULT
CUSTOM
2 Enter your four digit password using the 0–9
MENU
Move
Select
Exit
buttons.
Age up to 6
MENU
The PARENTAL CONTROL menu appears.
5 Press MENU to exit the menu.
Move
Select
Exit
PARENTAL CONTROL
PARENTAL LOCK: ON
TounlockthePARENTALCONTROL
feature temporarily
RATING:
CHILD
7 Move the joystick up or down to select a
CHANGE PASSWORD
desired rating (CHILD, YOUTH and YOUNG
When you select a PARENTAL CONTROL
program, no sound or picture except for a channel
ADULT), and press
.
If you want to select the ratings from
“CUSTOM,” go to step 4 of “Selecting a
Custom Rating” on page 49.
MENU
Move
Select
Exit
number will appear. The
indicator is displayed.
To view the program, follow the steps below.
1 Press ENTER to display the “Password”
8 Press MENU to exit the menu.
screen.
2 Enter your password using the 0–9 buttons.
PARENTAL CONTROL will be canceled
(PARENTAL LOCK set to OFF) until you turn
your projection TV off.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Move the joystick up or down to select
RATING, and press
7 Move the joystick up or down to select , and
Selecting a Custom Rating
.
press
.
If you want to select the ratings to be blocked from
CUSTOM once you have activated the
PARENTAL CONTROL feature (see page 47),
follow the procedure below.
The
indicator automatically appears beside
PARENTAL CONTROL
PARENTAL LOCK: ON
the selected rating and all “higher” ratings,
indicating that the programs that match the
ratings will be blocked.
RATING:
CHILD
CHANGE YOUTH
YOUNG ADULT
CUSTOM
For a detailed description of each rating, see pages 52
and 53.
Age up to 6
TV RATING
MENU
Move
Select
Exit
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
1 Select PARENTAL CONTROL from the SET
:D – L – S – V –
:D – L – S – V –
UP menu. (see page 44)
4 Move the joystick up or down to select
:
L – S – V
CUSTOM, and press
.
SET UP
Select category
Move Select
PARENTAL CONTROL
CAPTION VPASSWORD
SELECT OU_ __ _
LANGUAGE:ENGLISH
VIDEO LABEL
DIRECT PLAY
FREEZE MODE:NORMAL
MENU
Exit
First, select a TV rating.
5 Move the joystick up or down to select TV
RATING, and press
.
Some ratings have additional content ratings
called “extenders.” The extenders are defined
as follows: D (sexually suggestive Dialog), FV
(Fantasy Violence), L (coarse Language), S
(Sexual situations) and V (Violence). By
setting the extenders, you can define additional
viewing limits. For more details of extenders,
see page 53.
DTV INPUT:
Use [0-9] to enter
password
Y PB PR
MENU
Move
Exit
TV RATING
_
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
2 Enter your four digit password using the 0–9
:D _ L _ S _ V _
:D _ L _ S _ V _
L _ S _ V _
buttons.
:
The PARENTAL CONTROL menu appears.
Select rating
Move Select
MENU
Exit
PARENTAL CONTROL
PARENTAL LOCK: ON
All of the extenders included in the selected
ratings will be blocked. If you wish to allow
any of them to be viewed, go to step 8.
RATING:
CHILD
CHANGE PASSWORD
6 Move the joystick up or down to select the TV
rating to be blocked, and press
.
(continued)
MENU
Move
Select
Exit
TV RATING
_
_
_
TV–Y
TV–Y7
TV–G
:FV _
:D _ L _ S _ V _
:D _ L _ S _ V _
TV–PG
TV–14
TV–MA
_
:
L _ S _ V _
Allow rating
Move Select
MENU
Exit
49
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Move the joystick left or right to select the
10Repeat steps 8 and 9 for other extenders.
13Move the joystick up or down to select the
extender to be viewed, and press
.
movie rating to be blocked, and press
.
All programs that match the ratings you select
and higher, except for the extenders that were
canceled, will be blocked.
TV RATING
MOVIE RATING
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
G
PG
PG–13
R
NC–17
X
–
–
–
–
–
:FV _
11After setting of the TV rating is complete,
:D – L – S – V –
:D – L – S – V –
move the joystick up or down to select
,
:
L – S – V
and press
.
Block content
Move Select
MENU
Block rating
Move Select
Exit
MENU
CUSTOM RATING
Exit
TV RATING
MOVIE RATING
UNRATED: VIEW ALL
9 Move the joystick up or down to select
“–,” and press
14Move the joystick up or down to select , and
.
press
.
“–” appears beside the selected extender,
indicating that the programs that match the
extender can be viewed.
Select category
MENU
Move
Select
Exit
The
indicator automatically appears beside
the selected rating and all “higher” ratings,
indicating that the programs that match the
ratings will be blocked.
Second, select a movie rating.
If you select
,
is displayed to show that
12Move the joystick up or down to select MOVIE
RATING, and press
the programs that match the extender will be
blocked again.
.
MOVIE RATING
–
–
–
–
–
–
G
PG
PG–13
R
NC–17
X
MOVIE RATING
–
–
–
–
–
–
TV RATING
G
PG
PG–13
R
NC–17
X
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
:D – L – S – V _
:D – L – S – V –
Select rating
Move Select
MENU
Exit
:
L – S – V
Select rating
Move Select
MENU
Exit
Select category
Move Select
MENU
Exit
15Press MENU to exit the menu.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
To block TV programs and/or
movies for which a rating signal is
not given (NR and N/A)
For a description of the NR and N/A ratings, see page
53.
To block ...
Select ...
Changing the Password
No program
1 Select PARENTAL CONTROL from the SET
(to view any unrated
TV program and
movie)
VIEW ALL
UP menu. (see page 44)
SET UP
PARENTAL CONTROL
CAPTION VIPASSWORD
SELECT OU
LANGUAGE:ENGLISH
VIDEO LABEL
DIRECT PLAY
FREEZE MODE:NORMAL
Unrated TV programs TV
1 Perform steps 1–4 of “Selecting a Custom
_ __ _
Unrated movies
MOVIE
Rating” on page 49.
Unrated TV programs
and movies
DTV INPUT:
Use [0-9] to enter
password
Y PB PR
2 Move the joystick up or down to select
BOTH
UNRATED, and press
.
MENU
Move
Exit
CUSTOM RATING
4 Press MENU to exit the menu.
2 Enter your four digit password using the 0–9
TV RATING
MOVIE RATING
UNRATED: VIEW ALL
TV
buttons.
MOVIE
BOTH
The PARENTAL CONTROL menu appears.
PARENTAL CONTROL
PARENTAL LOCK: ON
No block
Move
MENU
Select
Exit
RATING:
CHILD
CHANGE PASSWORD
3 Move the joystick up or down to select the type
of programs to be blocked, and press
.
MENU
Move
Select
Exit
CUSTOM RATING
TV RATING
MOVIE RATING
UNRATED: BOTH
3 Move the joystick up or down to select
CHANGE PASSWORD, and press
.
Block all unrated
programming
PARENTAL CONTROL
PARENTAL LOCK: ON
MENU
Move
Select
Exit
CHILD
RATING:
CHANGE PASSWORD
NEW
_ _ _ _
Use [0-9] to enter
new four digit
password
Move
MENU
Exit
(continued)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Enter a new four digit password using the 0–9
Movie ratings
What the Ratings
Mean
buttons.
Movie ratings are for movies (including those
shown on TV) rated according to the Motion
Picture Association of America (MPAA)
Guidelines.
PARENTAL CONTROL
PARENTAL LOCK: ON
CHILD
CHANGE PASSWORD
COMFIRM
RATING:
Sony’s predetermined ratings
These are original ratings that Sony predetermined
according to the viewer’s age. Each rating allows
you to view the certain programs, as follows.
_ _ _ _
G (General Audiences—All Ages
Admitted):
In G-rated films no strong words are used, the
violence is at a minimum, nudity and sex scenes
are not present, nor is there any drug use.
Confirm password
Move
MENU
Exit
5 Enter the password set in step 4 again to
See the center column to page 53 for a description of
TV and movie ratings.
confirm.
Material May Not Be Suitable For
Children):
This is a film which may need to be monitored first
by parents.
CHILD:
If you entered it incorrectly, “Password
incorrect” appears.
Suitable for children under the age of 6.
Viewable movie ratings: G, NR, and N/A
Viewable TV ratings: TV-Y, TV-G, and TV-NR
Re-enter the correct password.
6 Press MENU to exit the menu.
YOUTH:
PG-13 (Parents Strongly Cautioned. Some
Material May Be Inappropriate For Children
Under 13):
Parents are alerted to be very careful about the
attendance of their under-teenage children when
viewing.
Suitable for children aged 7 and older.
Viewable movie ratings: G, PG, NR, and N/A
Viewable UTV ratings: TV-Y, TV-Y7, TV-G, TV-
PG, and TV-NR
If you have forgotten your
password
In step 1 of “Changing the Password,” enter the
master password “4357” (corresponding to
“HELP” on a phone number pad). You can then
store a new password.
YOUNG ADULT:
Suitable for children aged 14 and older.
Viewable movie ratings: G, PG, PG-13, NR, and
N/A
Viewable TV ratings: TV-Y, TV-Y7, TV-G, TV-
PG, TV-14, and TV-NR
R (Restricted, Under 17 Require
Accompanying Parent Or Adult Guardian):
This film includes hard language, tough violence,
nudity, drug abuse or other elements of concern.
Notes:
• If you entered “4357” as your password the first
time, you cannot store a new password. (see step 2
of “Activating the PARENTAL CONTROL feature”
on page 47)
NC-17 or X (No One 17 Or Under
Admitted.):
This is a film that most parents would consider not
suitable for children aged 17 and under. There may
be violence, sex, aberrational behavior, drug abuse
or other elements of concern.
• When you select a PARENTAL CONTROL
program and the
indicator is displayed on the
screen, you cannot view that program even if you
enter “4357.” (see “To unlock the PARENTAL
CONTROL feature temporarily” on page 48)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
NR (Not Rated):
TV-14 (Parents Strongly Cautioned):
V (Violence):
This is a film that a producer has not rated,
intending to have his film widely released.
This program contains some material that many
parents would find unsuitable for children under
the age of 14.
Programs containing violence
There may be some profanity, violence or brief
nudity in these programs.
N/A (Not Applicable):
TV-MA (Mature Audience Only):
This is a film that a producer considers outside the
scope of the MPAA ratings.
This program is specifically designed to be viewed
by adults and therefore may be unsuitable for
children under the age of 17.
Note:
• NR and N/A ratings are shown together as
UNRATED in the menu.
TV-NR (Not Rated/Unrated):
This is a program broadcast without any rating,
such as news, news flashes or sports.
TV ratings
Note:
TV ratings are for TV programs rated according to
the Television Parental Guidelines.
• The TV-NR rating is shown as UNRATED in the
menu.
TV-Y (All Children):
This program is designed for young children aged
2–6 and is appropriate for all children.
About the extenders of TV ratings
TV-Y7, TV-PG, TV-14 and TV-MA ratings have
additional content ratings called “extenders” to
define additional viewing limits. The extenders are
defined as follows:
TV-Y7 (Directed to Older Children):
This program is designed for children aged 7 and
above. Themes and elements in this program may
include mild fantasy violence or slapstick
violence, or may frighten children under the age of
7.
D (sexually suggestive Dialog):
Programs containing suggestive dialog, or sexual
innuendo
TV-G (General Audience):
FV (Fantasy Violence):
Programs containing cartoon violence occurring in
TV-Y7 programs only
Most parents would find this program suitable for
all ages. It contains little or no violence, no strong
language and little or no sexual dialog or
situations.
L (coarse Language):
Programs containing coarse language
TV-PG (Parental Guidance Suggested):
This program contains some material that parents
may find unsuitable for younger children.
S (Sexual situations):
Programs containing sexual content
53
Download from Www.Somanuals.com. All Manuals Search And Download.
If the remote control doesn’t work
• See the tips on page 56.
Mitsubishi/MGA
Multitech
NEC
Olympic
Optimus
Panasonic
Pentax
Philco
Philips
Pioneer
Quasar
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Additional Operations
VCR manufacturer code numbers
327
308, 309, 306, 307
305, 304
308, 309
308, 309, 310
308
308, 309, 306
304, 305, 308, 309, 311, 329,
312, 313, 310
309, 330, 328, 335, 324, 338
314
315
322, 313, 321
330, 335
312, 313, 321, 335, 323, 324,
325, 326
327, 328
315
338, 327
308, 309, 338, 310
338
338
332
Operating Video
Equipment
Manufacturer
Code
Sony
Aiwa
301, 302, 303
338
Admiral (M. Ward)
Audio Dynamic
Bell & Howell (M. Ward)
Broksonic
Canon
327
314, 337
330, 343
319, 317
Setting the Manufacturer’s
RCA/PROSCAN
Code
Realistic
Sansui
Singer
Samsung
Sanyo
309, 308
Citizen
332
You can use the supplied remote control to operate
Sony or non-Sony video equipment that has an
infrared sensor.
Craig
Criterion
315, 302, 332
315
Curtis Mathis
Daewoo
DBX
Dimensia
Emerson
Fisher
304, 338, 309
341, 312, 309
314, 336, 337
304
319, 320, 316, 317, 318, 341
330, 334, 335, 333
338
Scott
1 Set the AV1/2/3/DVD/MDP switch to the input
through which you would like to access your
video equipment.
Sharp
Shintom
Signature 2000 (M. Ward)
Sylvania
Symphonic
SV2000
Tashiro
Tatung
Teac
Technics
Teknica
The following Sony equipment is preset to
each input as shown below:
Funai
General Electric
Go Video
Goldstar
329, 304, 309
340, 339, 322
332
AV1 (303)
AV2 (302)
AV3 (301)
Beta, ED Beta VCRs
8 mm VCR
314, 336, 337
314, 336, 338, 337
309, 308
Hitachi
Instant Replay
JC Penney
306, 304, 305, 338
309, 308
309, 305, 304, 330, 314, 336,
337
VHS VCR
DVD/MDP (751) DVD Player
342, 338
Toshiba
Wards
XR-1000
Yamaha
Zenith
312, 311
327, 328, 335, 331, 332
315
330, 314, 336, 337
331
JVC
Kenwood
LXI (Sears)
314, 336, 337
314, 336, 332, 337
332, 305, 333, 334, 330, 335,
338
308, 309, 310
314, 336, 337
332
2 Press CODE SET, DVD/VCR (FUNCTION),
and the 0-9 buttons to enter the manufacturer’s
code number (see the following chart), then
press ENTER.
Magnavox
Marantz
Marta
Memorex
Minolta
For example, to operate a Sony 8mm VCR:
FUNCTION
DVD/VCR
ENTER
CODE SET
309, 335
305, 304
3
0
2
54
Download from Www.Somanuals.com. All Manuals Search And Download.
MDP manufacturer code numbers
Operating a VCR using the remote
control
O
p
e
r
a
t
i
n
g
a
D
V
D
P
l
a
y
e
r
u
s
i
n
g
t
h
e
remote control
Manufacturer
Code
To turn On/Off
Press DVD/VCR (POWER).
[Green Button]
To turn On/Off
Press DVD/VCR (POWER).
[Green Button]
Press N.
Press x.
Press X. Press again to resume
normal playback.
Sony
Panasonic
Pioneer
701
704
702
To select a channel
To change channels
To record
Press the 0 – 9 buttons.
Press CH +/–.
To play
To stop
To pause
Press
(REC) while pressing
(lower).
DVD Player manufacturer code
numbers
To play
To stop
Press N.
Press x.
To step through
different tracks of an
audio disc
To step through
different chapters of a to step backward.
video disc
To display the Title
menu
To display the DVD
menu
To select tracks
directly
To display the menu
(Set up)
Press M to step forward or m
to step backward.
Manufacturer
Code
To fast forward
To rewind the tape
To pause
Press M.
Press m.
Press X. Press again to resume
normal playback.
Press CH+ to step forward or CH–
Sony
751
753
752
755
754
Panasonic
Pioneer
RCA
Press TITLE.
To search the picture
forward or backward
Press M or m during playback.
Release to resume normal
playback.
Press DVD MENU.
Press 0-9 buttons.
Press MENU.
Toshiba
To change input mode Press TV/VCR.
Tips z
• In some rare cases, you may not be able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment’s own remote control.
Operating an MDP using the
remote control
To turn On/Off
Press DVD/VCR (POWER).
[Green Button]
• When you remove the batteries, the code number
may revert to the factory setting.
To play
To stop
To pause
Press N.
Press x.
Press X. Press again to resume
normal playback.
To search the picture
forward or backward
Press M or m during playback.
Release to resume normal
playback.
Operating video equipment
1 Set the AV1/2/3/DVD/MDP switch to the input
through which you would like to access your
video equipment.
To search a chapter
forward or backward
Press CH +/–.
2 Press DVD/VCR (FUNCTION).
3 Use the VCR/DVD/MDP operation buttons
indicated in the following tables.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
receiver.
Manufacturercodenumbers(cable
box)
Operating a Cable Box
or Satellite Receiver
(SAT)
If the remote control doesn’t work
• Try repeating the set up procedures using the
other codes listed for your equipment.
Manufacturer
Gemini
Code
233
Hamlin/Regal
Jerrold/G. I.
222, 223, 224, 225, 226
201, 202, 203, 204, 205, 222,
206, 207, 208, 218
Macom
Magnavox
Oak
Panasonic
Philips
Pioneer
230, 231, 232
234
227, 228, 229
219, 220, 221
236, 237, 238, 239, 240, 241
214, 215
To operate the projection TV
Press TV (FUNCTION). Then use the projection
TV control buttons to control the projection TV.
Setting the Manufacturer’s
Code
You can program the supplied remote control to
operate a cable box or satellite receiver.
Tips z
• If more than one code number is listed, try entering
them one by one until you come to the correct code
for your equipment.
Samsung
Scientific Atlanta
Tocom
235
209, 210, 211
216, 217
Press CODE SET, SAT/CABLE (FUNCTION),
and the 0-9 buttons to enter the manufacturer’s
code number (see the following chart), then press
ENTER.
Zenith
212, 213
• If you enter a new code number, the code number
you previously entered at that setting is erased.
For example, to operate a Sony satellite receiver:
Manufacturer code numbers
(Satellite receiver)
• In some rare cases, you may not be able to operate
your equipment with the supplied remote control. In
this case, use the equipment’s own remote control
unit.
FUNCTION
SAT/CABLE
ENTER
CODE SET
8
0
1
Manufacturer Code number
Sony
801 (preset code for remote
control)
• Whenever you remove the batteries — to replace
them, for example — if too much time is taken, the
code numbers may revert to the factory setting and
must be reset.
General Electric
RCA/PROSCAN
802
802
Operating a cable box or
satellite receiver
1 Press SAT/CABLE (POWER) [Green Button]
to turn on/off the cable box or satellite receiver.
2 Press SAT/CABLE (FUNCTION).
3 For other operations, refer to the operating
instructions that come with the equipment.
Blue-labeled buttons such as the GUIDE
button can be used only with a satellite
56
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Count how many times the TIMER/STAND BY
indicator flashes in total. It flashes twice at 3
flashes twice, stops flashing for 3 seconds, and
flashes twice again, that counts as twice.
Additional Information
Dark, poor or no picture (screen lit),
good sound
b Adjust PICTURE in the VIDEO menu. (see
“PICTURE” on page 36)
2 Press POWER on the projection TV to turn it
off, then inform qualified Sony personnel or the
above Direct Response Center of the number of
flashes.
b Adjust BRIGHTNESS in the VIDEO menu. (see
“BRIGHTNESS” on page 36)
Troubleshooting
If, after reading the following
instructions, you have additional
questions related to the use of your Sony
projection TV, please call one of the
following numbers (English only).
Customers in the continental United States
contact the Sony Customer Information
Service Center at:
b Check antenna/cable connections.
b Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition. (see
“To perform AUTO SET UP again” on page 25)
No picture (screen not lit), no sound
b Make sure the power cord is plugged in.
b Adjust the convergence again using the FLASH
FOCUS button. (see “Adjusting the Convergence
Automatically (FLASH FOCUS)” on page 25)
b Operate with the buttons on both the projection TV
and the remote control.
b Check to see if the TV/VIDEO setting is correct:
when watching TV, set to TV, and when watching
video tapes, set to VIDEO 1, 2, 3, 4 or 5.
1-800-222-SONY (7669)
Customers in Canada contact the Sony
Customer Relations Center at:
(416) 499-SONY (7669)
Good picture, no sound
b Press MUTING so that “MUTING” disappears
b Try another channel. It could be station trouble.
from the screen. (see “MUTING” on page 26)
b Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition. (see
“To perform AUTO SET UP again” on page 25)
The picture turns off and the TIMER/
STAND BY indicator on the front panel
flashes (self-diagnosis function)
b Check the MTS setting in the AUDIO menu. (see
“MTS” on page 37)
b Make sure SPEAKER is set to ALL ON or L/R
OFF in the AUDIO menu. (see “SPEAKER” on
page 38)
b The PARENTAL CONTROL feature is activated.
(see “Using the PARENTAL CONTROL Feature”
on page 47)
b The projection TV is equipped with a self-
diagnosis function. If there is a problem with your
projection TV, the TIMER/STAND BY indicator
on the front panel will flash repeatedly. Counting
the number of flashes helps you inform qualified
Sony personnel of the projection TV’s condition.
b Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition. (see
“To perform AUTO SET UP again” on page 25)
Remote control does not operate
b Batteries could be weak. Replace the batteries.
b Press TV (FUNCTION) when operating your
projection TV.
(continued)
b Make sure the projection TV’s power cord is
connected securely to the wall outlet.
TIMER /
STAND BY
b Locate the projection TV at least 3-4 feet away
from fluorescent lights.
flashing
b Check the polarity of the batteries.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot receive digital channels (when a
DTV receiver is connected)
screen
Cannot operate the menu
b If the item you want to choose appears in gray, you
b Check the DTV INPUT setting in the SET UP
b Check the CABLE setting in the CHANNEL SET
cannot select it.
menu. (see “DTV INPUT” on page 47)
UP menu. (see “CABLE” on page 42)
b Press the projection TV’s power button off and on
b Check the connections between the DTV receiver
b Check the antenna/cable connections.
again.
and the projection TV. (see pages 12 and 13)
Cannot receive any channels when
using cable TV
b Check your local listings to find out if you can
receive digital broadcasts in your area.
b Press ANT to change the input mode. (see “ANT”
on page 26)
b Check the connection with a cable box again. (see
pages 9 and 11)
Cannot receive upper channels (UHF)
when using an antenna
Dotted lines or stripes
b Make sure CABLE is ON in the CHANNEL SET
UP menu. (see “CABLE” on page 42)
b Adjust the antenna.
b Keep the projection TV away from noise sources
UP menu. (see “CABLE” on page 42)
b Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory. (see
“AUTO PROGRAM” on page 42)
that are not presently in the TV’s memory. (see
“AUTO PROGRAM” on page 42)
TV is fixed to one channel
Cannot gain enough volume when using
a cable box
b Use AUTO PROGRAM to add receivable channels
PROGRAM” on page 42)
No color
b Adjust the COLOR in the VIDEO menu. (see
“COLOR” on page 36)
b Increase the volume at the cable box. Then press
TV (FUNCTION) and adjust the projection TV’s
volume.
b Try turning CHANNEL FIX off. (see “CHANNEL
FIX” on page 42)
b Black and white programs cannot be seen in color.
b Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition. (see
“To perform AUTO SET UP again” on page 25)
Double images or ghosts
CHANNEL INDEX does not display all
available channels
b Use a highly directional outdoor antenna or a cable
(when the problem is caused by reflections from
nearby mountains or tall buildings).
b Make sure CABLE is ON in the CHANNEL SET
UP menu. (see “CABLE” on page 42)
b Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory. (see
“AUTO PROGRAM” on page 42)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
FAVORITE CHANNEL does not display
your choices
b Verify that FAVORITE CHANNEL is set to
MANUAL in the CHANNEL SET UP menu. (see
“Setting FAVORITE CHANNEL manually” on
page 43)
Some video sources do not appear when
you press TV/VIDEO
b Ensure that VIDEO LABEL is not set to SKIP. (see
“VIDEO LABEL” on page 46)
Recording through SELECT OUT does
not function properly when recording in
PIP or P&P mode
b SELECT OUT will not record both images in PIP
or P&P. Only the main picture will be recorded.
b If you are recording the main picture and you
switch to the sound of the sub picture using the
AUDIO button, the main picture will be recorded
with sound from the other program.
Cannot play shooting games
b Some shooting games which involve pointing a
light beam at the TV screen with an electronic gun
or rifle cannot be used with this projection TV. For
details, see the instruction manual supplied with the
video game software.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO 5 (DTV) IN
Dimensions (W/H/D)
3
1
7
Maximum scanning rate: 1080i
Y: 1 Vp-p, 75 ohms, negative or tri-level sync
PB: 0.7 Vp-p, 75 ohms
PR: 0.7 Vp-p, 75 ohms
or
G: 0.7 Vp-p
B: 0.7 Vp-p
R: 0.7 Vp-p
1,380 K 1,400 K 680 mm (54 /8 K 55 /8 K 26 /8 inches)
Specifications
(KP-57XBR10W)
1,558 K 1,574 K 735 mm (61 /8 K 62 K 29 inches)
3
Projection system
(KP-65XBR10W)
3 picture tubes, 3 lenses, horizontal in-line system
Mass
Picture tube
126 kg (277 lbs 12 oz) (KP-57XBR10W)
148 kg (326 lbs 4 oz) (KP-65XBR10W)
7-inch high-brightness monochrome tubes (6.3 raster size),
with optical coupling and liquid cooling system
HD: 0.5–5 Vp-p, 2.2 kilohms
VD: 0.6–5 Vp-p, 2.2 kilohms
Note:
The VIDEO 5 (DTV) IN jacks are not compatible with a
computer’s 5BNC (R/G/B/HD/VD) video output connectors.
AUDIO (phono jacks): 500 mVrms (100% modulation),
Impedance: 47 kilohms
Supplied accessories
Projection lenses
Remote control: RM-Y907 (1)
Batteries size: AA (R6) (2)
High performance, large diameter hybrid lens F1.1
Television system
Optional accessories
American TV standard
Connecting cables:
Channel coverage
RK-G34, RK-74A, RKG-69HG, VMC-10HG, VMC-
720M, VMC-810S/820S, YC-15V/30V
U/V mixer: EAC-66
Rear speakers: SS-MB115
AV receiver: STR-V555ES
VHF: 2–13/UHF: 14 –69/CATV: 1 – 125
SELECT OUT
VIDEO (phono jack): 1 Vp-p, 75-ohms unbalanced, sync
Antenna
negative
75 ohm external terminal for VHF/UHF
AUDIO (phono jacks): 470 mVrms (100% modulation),
Impedance: 47 kilohms
AUDIO (VAR) OUT (phono jacks): 950 mVrms (100%
modulation)
Screen size (measured diagonally)
57 inches (KP-57XBR10W)
65 inches (KP-65XBR10W)
Design and specifications are subject to change without
notice.
AUDIO (FIX) OUT (phono jacks): 500 mVrms (100%
modulation)
CONTROL S IN/OUT: minijacks
Inputs/outputs
VIDEO 1/3 IN
VIDEO 2 INPUT
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms unbalanced, sync
negative
AUDIO (phono jacks): 500 mVrms (100% modulation),
Impedance: 47 kilohms
VIDEO 4 IN
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms unbalanced, sync
negative
Speaker
Tweeter: 100 mm (4”) K 2
3
Woofer: 160 mm (6 /8”) K 2
Center: 100 mm (4”) K 2
Speaker output
Front: 20 W K 2
Center: 20 W K 1
Rear: 20 W K 2
Power requirement
120 V AC, 60 Hz
Power consumption
In use (Max.): 300 W
In standby: 1 W
AUDIO (phono jacks): 500 mVrms (100% modulation),
Impedance: 47 kilohms
Y: 1 Vp-p, 75 ohms, sync negative
PB: 0.7 Vp-p, 75 ohms
PR: 0.7 Vp-p, 75 ohms
60
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR TEMP . . . . . . . . . . . . . . . .36
Connecting Projection TV to
amplifier that supports Dolby
LIVE . . . . . . . . . . . . . . . . . . . . . .38
;PRO LOGIC. . . . . . . . . . . . . .38
SRS 3D MONO. . . . . . . . . . . . . .38
M
Index
MDP operation. . . . . . . . . . . . . . . . 55
antenna . . . . . . . . . . . . . . . . . . . . .8
audio system . . . . . . . . . . . . . . . .21
AV receiver. . . . . . . . . . . . . . . . .20
cable . . . . . . . . . . . . . . . . . . . . . . .8
cable box and cable. . . . . . . . . . . .9
camcorder . . . . . . . . . . . . . . . . . .16
DTV receiver . . . . . . . . . . . .12, 13
DVD Player. . . . . . . . . . . . . .18, 19
two VCRs . . . . . . . . . . . . . . . . . .17
VCR . . . . . . . . . . . . . . . . . . .10, 11
CONTROL S feature . . . . . . . . . . . .8
Convergence . . . . . . . . . . . . . . . . . .25
A
GAME . . . . . . . . . . . . . . . . . 27, 36
MOVIE . . . . . . . . . . . . . . . . 27, 36
PRO . . . . . . . . . . . . . . . . . . . 27, 36
STANDARD . . . . . . . . . . . . 27, 36
VIVID . . . . . . . . . . . . . . . . . 27, 36
Movie rating. . . . . . . . . . . . . . . . . . 52
MTS
MONO. . . . . . . . . . . . . . . . . . . . 37
SAP . . . . . . . . . . . . . . . . . . . . . . 37
STEREO . . . . . . . . . . . . . . . . . . 37
MUTING button . . . . . . . . . . . . . . 26
F
ACTIVE button . . . . . . . . . . . . 30, 32
ANT button. . . . . . . . . . . . . 26, 31, 33
Antenna cable . . . . . . . . . . . . . . . . . . 8
Antenna connector . . . . . . . . . . . . . . 8
AUDIO button . . . . . . . . . . . . . 31, 33
AUDIO menu operations 9. . . . . . . 37
Audio/Video cable . . . . . . . . . . . . . . 7
AUTO PROGRAM . . . . . . . . . . . . 42
AUTO SET UP. . . . . . . . . . . . . . . . 24
AUX Hookup . . . . . . . . . . . . . . . . . . 9
Factory settings . . . . . . . . . . . . .37, 38
FAVORITE CHANNEL
selecting. . . . . . . . . . . . . . . . . . . .42
setting . . . . . . . . . . . . . . . . . . . . .43
FLASH FOCUS. . . . . . . . . . . . . . . .25
FREEZE button . . . . . . . . . .26, 31, 33
FREEZE MODE
TWIN . . . . . . . . . . . . . . . . . . . . .46
G
B
N
G/B/R/HD/VD. . . . . . . . . . . . . .13, 47
BALANCE . . . . . . . . . . . . . . . . . . . 37
BASS . . . . . . . . . . . . . . . . . . . . . . . 37
BRIGHTNESS . . . . . . . . . . . . . . . . 36
NR . . . . . . . . . . . . . . . . . . . . . . . . . 37
H
O
Hookups. . . . . . . . . . . . . . . . . . . . . . .8
HUE. . . . . . . . . . . . . . . . . . . . . . . . .36
D
ON/OFF TIMER . . . . . . . . . . . . . . 40
On-line help . . . . . . . . . . . . . . . . . . 23
Operating video equipment . . . . . . 54
C
DAYLIGHT SAVING . . . . . . . . . .40
Digital TV program. . . . . . . . . . . . .28
DIRECT PLAY. . . . . . . . . . . . . . . .46
DISPLAY button. . . . . . . . . . . . . . .27
DRC . . . . . . . . . . . . . . . . . . . . . . . . .1
DTV INPUT . . . . . . . . . . . . . . . . . .47
DVD
CABLE . . . . . . . . . . . . . . . . . . . . . . 42
Cable box
J
connection. . . . . . . . . . . . . . . . 9, 11
operation. . . . . . . . . . . . . . . . . . . 56
CAPTION VISION . . . . . . . . . . . . 45
CATV cable . . . . . . . . . . . . . . . . . . . 8
CC button . . . . . . . . . . . . . . . . . . . . 27
CH +/– buttons . . . . . . . . . . . . . . . . 26
CHANNEL CAPTION. . . . . . . . . . 41
CHANNEL FIX . . . . . . . . . . . . . . . 42
CHANNEL INDEX . . . . . . . . . . . . 33
CHANNEL SET UP menu
Joystick . . . . . . . . . . . . . . . . . . . . . .23
JUMP button . . . . . . . . . . . . . . . . . .26
P
PARENTAL CONTROL. . . . . . . . 47
Password . . . . . . . . . . . . . . . . . . . . 47
PICTURE. . . . . . . . . . . . . . . . . . . . 36
PICTURE MODE button. . . . . . . . 36
Picture-and-Picture (P&P) . . . . . . . 32
Picture-in-Picture (PIP) . . . . . . . . . 30
PIP/P&P operations
L
connection. . . . . . . . . . . . . . .18, 19
operation . . . . . . . . . . . . . . . . . . . 55
DYNAMIC PICTURE . . . . . . . . . .37
LANGUAGE selection . . . . . . . . . .45
Learning menus
AUDIO . . . . . . . . . . . . . . . . . . . .37
CHANNEL SET UP . . . . . . . . . .41
SET UP . . . . . . . . . . . . . . . . . . . .44
TIMER . . . . . . . . . . . . . . . . . . . .39
VIDEO . . . . . . . . . . . . . . . . . . . .36
E
ACTIVE. . . . . . . . . . . . . . . . 30, 32
ANT. . . . . . . . . . . . . . . . . . . 31, 33
AUDIO . . . . . . . . . . . . . . . . 31, 33
CH +/– . . . . . . . . . . . . . . . . . 31, 33
CHANNEL INDEX. . . . . . . . . . 33
Editing using SELECT OUT . . . . .17
EFFECT . . . . . . . . . . . . . . . . . . . . .38
;3 STEREO . . . . . . . . . . . . . . .38
GAME. . . . . . . . . . . . . . . . . . . . .38
operations
. . . . . . . . . . . . 41
CHANNEL SKIP . . . . . . . . . . . . . . 41
Coaxial cable . . . . . . . . . . . . . . . 7, 10
COLOR. . . . . . . . . . . . . . . . . . . . . . 36
61
Download from Www.Somanuals.com. All Manuals Search And Download.
FREEZE . . . . . . . . . . . . . . . . 31, 33
POSITION . . . . . . . . . . . . . . . . . 30
SWAP. . . . . . . . . . . . . . . . . . 31, 33
Zoom in feature . . . . . . . . . . . . . 32
SHARPNESS . . . . . . . . . . . . . . . . .36
Sliders . . . . . . . . . . . . . . . . . . . . . . .23
ALL OFF . . . . . . . . . . . . . . . . . .38
ALL ON . . . . . . . . . . . . . . . . . . .38
CENTER IN . . . . . . . . . . . . . . . .38
L/R OFF . . . . . . . . . . . . . . . . . . .38
V
X
VCR. . . . . . . . . . . . . . . . . . . . . .10, 11
VCR manufacturer code numbers . .54
VIDEO LABEL. . . . . . . . . . . . . . . .46
XDS . . . . . . . . . . . . . . . . . . . . . . . . 27
Y
Y/PB/PR. . . . . . . . . . . . . . . . . . . 12, 19
VIDEO menu operations
VOL +/– buttons . . . . . . . . . . . . . . .26
. . . . .36
R
Rear speakers . . . . . . . . . . . . . . . . . . 6
Remote control
Battery installation . . . . . . . . . . . 23
Function buttons. . . . . . . . . . . . . 26
Graphic illustration. . . inside cover
W
Specifications . . . . . . . . . . . . . . . . .60
Splitter. . . . . . . . . . . . . . . . . . . . . . .11
SURROUND LEVEL. . . . . . . . . . .38
SWAP button . . . . . . . . . . . . . .31, 33
WIDE MODE button. . . . . . . . . . . .29
WIDE SCREEN MODE
FULL. . . . . . . . . . . . . . . . . . . . . .29
NORMAL . . . . . . . . . . . . . . . . . .29
Wide screen mode. . . . . . . . . . . .28
WIDE ZOOM . . . . . . . . . . . . . . .29
ZOOM. . . . . . . . . . . . . . . . . . . . .29
WIDE SCREEN MODE menu
S
T
S Video cable . . . . . . . . . . . . . . . . . . 7
Safety . . . . . . . . . . . . . . . . . . . . . . . . 2
SAP. . . . . . . . . . . . . . . . . . . . . . . . . 37
Satellite receiver operation . . . . . . . 56
Select button . . . . . . . . . . . . . . . . . . 23
SELECT OUT . . . . . . . . . . . . . . . . 45
SET UP button . . . . . . . . . . . . . . . . 24
TEST TONE . . . . . . . . . . . . . . . . . .39
TIMER menu operations
. . . .39
TREBLE . . . . . . . . . . . . . . . . . . . . .37
TV (FUNCTION) button . . . . . . . .26
TV POWER button . . . . . . . . . . . . .26
TV rating. . . . . . . . . . . . . . . . . . . . .53
TV/VIDEO button. . . . . . . . . . . . . .27
operation
. . . . . . . . . . . .40
SET UP menu operations
. . . . 44
Setting up the projection TV
automatically. . . . . . . . . . . . . 24
If, after reading this instruction manual, you
have additional questions related to the use of
your Sony projection TV, please call one of the
following numbers (English only).
Customers in the continental United
States contact the Sony Customer
Information Service Center at:
1-800-222-SONY (7669)
Customers in Canada contact the
Sony Customer Relations Center at:
(416) 499-SONY (7669)
Printed in U.S.A
Download from Www.Somanuals.com. All Manuals Search And Download.
|