3BC
UNIVERSAL
REMOTE CONTROL
KH2150
UNIVERSAL REMOTE CONTROL
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 ·
D-44867 BOCHUM
ID-Nr.: KH2150-07/08-V1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
PAGE
Safety
3
Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Appliance Overview
4
5
First use
Unpacking the device /
checking the package contents . . . . . . . . . . . . . . . . .5
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . .5
Operating elements
6
LCD display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
EXIT button (8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
SYSTEM-SETUP–System settings
10
VOL/MUTE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . .11
VOL/MUTE SET . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
VOL/MUTE RESET . . . . . . . . . . . . . . . . . . . . . . . . . .12
TIME-SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
DATE-SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
BACKLIGHT SETUP . . . . . . . . . . . . . . . . . . . . . . . . .14
SYSTEM-RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
CODE-SETUP – Device code
15
LIST CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ENTER CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
SEARCH CODES . . . . . . . . . . . . . . . . . . . . . . . . . . .17
BRAND CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Entering device codes for combination devices . . .20
Controlling combination devices . . . . . . . . . . . . . . .20
Display device code . . . . . . . . . . . . . . . . . . . . . . . .20
TIMER SETUP – Timer functions
21
TV SLEEP SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
TIMER SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
LEARN-SETUP – Learning functions
24
MODE LEARN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
MODE CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
ALL LEARN CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . .26
Download from Www.Somanuals1.com. All Manuals Search And Download.
MACRO-SETUP – Macro functions
27
MACRO SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
MACRO CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Maintenance and Cleaning
29
Battery maintenance . . . . . . . . . . . . . . . . . . . . . . . .29
Cleaning the remote control . . . . . . . . . . . . . . . . . .29
Disposal
29
30
31
31
32
32
33
33
34
Troubleshooting
Technical data
Manufacturer codes
Personal macros
Personal device codes
Conformity
Importer
Warranty and Service
Read the operating instructions carefully before using the device
for the first time and preserve these instructions for later re-
ference. Hand over the instruction manual to whomsoever
you might pass the device on to.
Download from Www.Somanuals.com2. All Manuals Search And Download.
UNIVERSAL REMOTE
CONTROL KH2150
Safety
Proper use
Children may only operate the remote control under adult
supervision.
The universal remote control can replace a maximum of ten
remote controls. It can only be used for entertainment electronics
with infrared receivers.
The functions of the universal remote correspond to those of
the original remote controls. The universal remote control is
intended for private use. It is not suitable for commercial use.
Any other use is considered improper use. The manufacturer
declines to accept responsibility for damage(s) arising from
improper use.
Risk of injury through incorrect
handling of batteries!
Batteries must be handled with special care. Take note of the
following safety instructions:
• Take the batteries out of the battery compartment as soon
as they are empty.
• Do not throw batteries into a fire. Never subject batteries
to high temperatures.
• If you will not be using the device for a longer period of
time, remove the batteries to prevent them from discharging.
• Explosion hazard! Non-rechargeable batteries must never
be recharged.
• Do not open the batteries or short-circuit them.
• Battery acid leaking from a battery can cause inflammation
of the skin. In event of contact with the skin, rinse with large
amounts of water. If the liquid comes into contact with your
eyes, rinse thoroughly with water, do not rub and immediately
consult a doctor.
Laser
The universal remote control has an infrared diode of laser
class 1. A safety system prevents the emission of hazardous
laser radiation during use. To prevent eye injuries, do not
modify or damage the safety system of the device.
Download from Www.Somanuals.com3. All Manuals Search And Download.
Damage to the device
• If the device is defective, do not attempt to repair it yourself.
In case of damage, contact the manufacturer or his service
hotline (see Warranty section).
• If liquid escapes from the device or if the device has been
otherwise damaged, it must be inspected by the manu-
facturer or his service hotline. Contact the manufacturer
or his service hotline (see Warranty section).
Appliance Overview
1
2
3
4
5
6
7
8
9
Infrared transmitter/receiver
LCD display with text field, number field and symbol field
ALL OFF button
Device buttons
S button
Arrow buttons
OK button
EXIT button
Speaker button
10 VOL button
11 MACRO button
12 Video text buttons
13 Number buttons
14 Button for one-/two-digit programme numbers
15 Playback buttons and function buttons
16 AV button
17 CH button
18 MENU button
19 EPG button
20 Battery compartment
Download from Www.Somanuals.com4. All Manuals Search And Download.
First use
Unpacking the device / checking the package
contents
Attention!
Keep the plastic packaging well away from small children.
There is a risk of suffocation.
• Unpack the device and accessories.
• Check the package contents
- Universal remote control
- Operating instructions
- Manufacturer list with device code list
• Remove the protective foil from the LCD display (2).
Note: Transport damage
If you notice transport damage, contact customer service
(see Warranty section).
Inserting the batteries
Attention!
The universal remote control may only be operated with
1.5 volt batteries.
1. Open the battery compartment (20) in the direction in-
dicated by the arrow.
2. Insert the batteries as shown in the figure and close the
battery compartment.
The LCD display (2) is activated as long as the batteries are
inserted.
The following figure shows the LCD display (2) after the batteries
have been inserted or replaced.
Download from Www.Somanuals.com5. All Manuals Search And Download.
Note:
If the LCD display (2) remains dark, check the polarity of the
batteries or insert new batteries.
The LCD display (2) is explained in the section LCD display.
Operating elements
LCD display
The LCD display (2) is divided into fields.
Text field (21)
The text field has two lines. The first line indicates the current
device, such as DVD, TV or VCR. The second line shows the
day of week information or device code.
Information in the LCD display (2) that is shown in the display
on two lines is shown in these operating instructions on a
single line.
Example
LCD display
SYSTEM-
SETUP
Operating instructions
SYSTEM-SETUP
Infrared symbol (22)
Every time a button is pressed, an infrared signal is sent and
the infrared symbol lights up.
SET symbol (23)
The SET symbol indicates that the remote control is in setup
mode and device codes can be entered, for example.
Timer symbol (24)
The Timer symbol indicates that a timer function has been
configured and is active.
Zzz symbol (25)
The SLEEPTIMER function for the television is activated.
After the time elapses, the television will be switched off.
Download from Www.Somanuals.com6. All Manuals Search And Download.
AM/PM symbol (26)
If the time is set to 12-hour format, a PM symbol is displayed
in the afternoon between 12:00 and 24:00. (See section
SYSTEM-SETUP – System settings).
Number field (27)
The display field for time and date information as well as the
device code.
Standard display
The standard display on the LCD display (2) consists of the
information for the current device "TV", the day of the week
"SUN“ and the time "12:00“.
How to change the settings for day of the week "SUN“ and
the time "12:00“ is described in the sections DATE-SETUP and
TIME-SETUP.
Lighting
The LCD display (2) lights up as soon as you press a button
on the remote control. The backlight switches off automatically.
The backlight time can be configured. See the section
"BACKLIGHT SETUP“. The default setting is ten seconds.
Buttons
ALL OFF button (3)
Switch device on/off.
Device buttons (4)
The device buttons are used to select which device should
be operated. The TV button is permanently assigned, all other
buttons can be freely configured.
Television
DVD player (Digital Versatile Disk)
Video recorder (Video Cassette Recorder)
Cable connection
Analogue satellite receiver
Digital satellite receiver
Auxiliary 1
Download from Www.Somanuals.com7. All Manuals Search And Download.
CD player (Compact Disk)
Amplifier
Auxiliary 2
S button (5)
Load SETUP menu or activate SHIFT function.
Arrow buttons (6)
Move up, right, left and down in menus.
OK button (7)
You can confirm a menu selection with the OK
button.
EXIT button (8)
#
Leave menu.
Speaker button (9)
Switch sound on/off.
VOL button (10)
Set volume.
MACRO button (11)
Pressing the MACRO button (11) followed by a
number button (13) 1, 2 or 3 activates the
saved commands.
Download from Www.Somanuals.com8. All Manuals Search And Download.
Video text buttons (12)
Switch on video text.
Stop automatic paging forward for multi-page
video texts.
Display information on the selected device.
Show video text and television programme at the
same time.
Switch off video text.
Number buttons (13)
Enter programme and device code numbers.
Button for one-/two-digit programme numbers (14)
Button for one-/two-digit programme numbers.
For two-digit programme numbers, first press
button (14), then enter the programme number
with the number buttons (13).
Playback buttons and function buttons (15)
The playback buttons REW, PLAY, F.F, RECORD, STOP and PAUSE
control devices such as DVD players, VCRs and CD players.
The coloured function buttons open categories in the video
text selection.
REW – Rewind, video text, category red.
PLAY – Playback, video text, category yellow.
F.F. – Fast forward, video text, category blue.
RECORD – Record.
Press twice to record.
STOP – Stop playback, video text, category green.
PAUSE – Pause playback, video text, category
magenta.
AV button (16)
Switch the video input (SCART).
Download from Www.Somanuals.com9. All Manuals Search And Download.
CH button (17)
Change the television channel.
MENU button (18)
Open the menu.
EPG button (19)
Depending on the selected device, the EPG button
activates the following functions:
Access the electronic television programme
guide.
TV/SAT
DVD :
Access the title menu.
VCR :
Access ShowView.
Note:
Consult the operating instructions of your VCR to learn whether
the "ShowView" function is supported.
SYSTEM-SETUP–System settings
In the system settings, you can configure the following:
VOL/MUTE SETUP
TIME-SETUP
DATE-SETUP
Volume control via a specific device.
Time format and setting the time.
Setting the date, year and day of
the week.
BACKLIGHT SETUP
SYSTEM-RESET
Backlighting of the LCD display (2).
Reset all settings.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
SYSTEM-SETUP overview
VOL/MUTE SETUP
All devices use their own volume control, if available.
If a video device, such as a VCR or DVD player, does not have
its own volume control, the volume control of the television
device is automatically used ("punch-through function").
The function VOL/MUTE SETUP allows you to set the volume
control to operate through a specific device, such as the tele-
vision.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the right arrow button (6). ALL VOL.SET appears in
the LCD display (2).
5. Press the right arrow button (6). ALL VOL. MODE? appears
in the LCD display (2).
6. Press the desired device button (4), such as TV. PLEASE
WAIT... then SUCCESS appears in the LCD display (2).
The volume for all devices is now controlled via the TV.
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
VOL/MUTE SET
Set the volume control for each individual device.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display.
4. Press the right arrow button (6). ALL VOL.SET appears in
the LCD display (2).
5. Press the down arrow button (6) repeatedly until
VOL/MUTE SET appears in the LCD display (2).
6. Press the right arrow button (6). MODE VOL. MODE?
appears in the LCD display (2).
7. Press the desired device button (4), such as "DVD".
PLEASE WAIT... then SUCCESS appears in the LCD
display (2).
The volume is set via the selected device. Automatic switching
to the volume control on the television is deactivated.
VOL/MUTE RESET
Reset all VOL/MUTE settings to the factory defaults.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the right arrow button (6). ALL VOL.SET appears in
the LCD display (2).
5. Press the down arrow button (6) repeatedly until
VOL/MUTE RESET appears in the LCD display (2).
6. Press the right arrow button (6). CONFIRM RESET appears
in the LCD display (2).
7. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
The remote control is reset to the factory defaults of the
manufacturer.
TIME-SETUP
Set the time format and the time.
Note:
Press the up or down arrow button (6) for 12-hour display. All
other settings are explained using 24-hour display as example.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/ MUTE SETUP appears
in the LCD display (2).
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
4. Press the down arrow button (6) repeatedly until TIME-
SETUP appears in the LCD display (2).
5. Press the right arrow button (6). TIME? 24HR 12:00 appears
in the LCD display (2). The message 24HR blinks.
Note:
Press the up or down arrow button for (6) 12-hour display. All
other settings are explained using 24-hour display as example.
6. Press the right arrow button (6). TIME? 24HR 12:00
appears in the LCD display(2). The hours value blinks.
7. Press the up or down arrow button (6) to set the hours.
8. Press the right arrow button (6). The minutes value blinks.
9. Press the up or down arrow button (6) to set the minutes.
10. Press the right arrow button (6). SUCCESS appears in
the LCD display (2).
11. Press the EXIT button (8) repeatedly until the standard
display appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message
TIMEOUT appears in the LCD display (2). Then the standard
display is shown automatically.
DATE-SETUP
Set the year, month, date and day of the week.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until DATE-
SETUP appears in the LCD display (2).
5. Press the right arrow button (6). YEAR? 2006 appears in
the LCD display (2). The numbers for the year blink.
6. Press the up or down arrow button (6) to set the year.
7. Press the right arrow button (6). MONTH? 1 appears in
the LCD display (2). The month value blinks.
8. Press the up or down arrow button (6) to set the month.
9. Press the right arrow button (6). DATE? 1 appears in the
LCD display (2). The date value blinks.
10. Press the up or down arrow button (6) to set the day.
11. Press the right arrow button (6). DAY? SUN appears in
the LCD display (2). The letters for the day of the week
blink.
12. Press the up or down arrow button (6) to set the day of
the week.
13. Press the right arrow button (6). SUCCESS appears in
the LCD display (2).
14. Press the EXIT button (8) repeatedly until the standard
display appears in the LCD display (2).
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
Note:
If no button is pressed for approx. 30 seconds, the message
TIMEOUT appears in the LCD display (2). Then the standard
display is shown automatically.
BACKLIGHT SETUP
Set the backlight time for the LCD display (2).
The backlight time can be changed in five second steps.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until BACK-
LIGHT SETUP appears in the LCD display (2).
5. Press the right arrow button (6). BACKLIGHT TIME 10
appears in the LCD display (2). The seconds value blinks.
6. Press the up or down arrow button (6) to set the seconds.
7. Press the right arrow button (6). SUCCESS appears in the
LCD display (2).
8. Press the EXIT button (8) repeatedly until the standard
display appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message
TIMEOUT appears in the LCD display (2). Then the standard
display is shown automatically.
SYSTEM-RESET
The remote control can be reset to the factory defaults.
Note:
All device codes, the system settings, all learned functions and
macros are deleted!
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until SYSTEM-
RESET appears in the LCD display (2).
5. Press the right arrow button (6). CONFIRM RESET appears
in the LCD display (2).
6. Press the right arrow button (6). PLEASE WAIT... appears
in the LCD display (2). All system settings are reset to the
factory defaults.
CODE-SETUP – Device code
To control a device with the remote control, a device code
must be entered for every device.
The device codes can be entered as follows:
LIST CODES
From the internal device list of the remote
control.
ENTER CODES From the additional manual with the device
codes.
SEARCH CODES Automatically or manually search for
codes.
BRAND CODES From the table of manufacturer codes.
LIST CODES
Select the device code for a device (TV, VCR, LD, DVD etc.)
from the internal list on the remote control.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
5. Press the desired device button (4). DEVICE? TV appears
in the LCD display (2).
Note:
For a television, press the device button TV (4), then continue
with step 7.
6. Press the up or down arrow button (6). The next device
appears in the LCD display (2).
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
CODE-SETUP overview
7. Confirm the selection with the OK button (7). First PLEASE
WAIT... then the first entry of the manufacturer list, such
as ADMIRAL 0000, appears in the LCD display (2).
8. Press the up or down arrow button (6). The next manu-
facturer with device code appears in the LCD display (2).
9. Press various buttons on the remote control to test the
functions. If your device responds, you have selected the
correct device code. Continue with step 12.
10. Press the left or right arrow button (6). The next device
code of the same manufacturer appears in the LCD
display (2).
11. Repeat step 9.
12. Press the OK button (7). The device code is saved. First
PLEASE WAIT... then SUCCESS appears in the
LCD display (2).
Repeat steps 1 to 12 for all devices that you would like to
control with the remote control.
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
ENTER CODES
With the ENTER CODES function, you locate the device code
in the enclosed manual “Manufacturer List with Device Code
List“.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the down arrow button (6). ENTER CODES appears
in the LCD display (2).
5. Press the right arrow button (6). MODE KEY appears in
the LCD display (2).
6. Press the desired device button (4). The LCD display (2)
shows CODE 0001, for example. Find the device code in
the manual "Manufacturer List with Device Code List".
7. Enter the device code with the number buttons (13).
SUCCESS appears in the LCD display (2). If the entered
device code is incorrect, the message CODE ERROR
appears in the LCD display (2). Repeat steps 2 to 8.
Repeat steps 1 to 8 for all devices that you would like to
operate.
SEARCH CODES
Automatic search
Automatically search for the device code within the internal
list of the remote control.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the down arrow button (6) repeatedly until SEARCH
CODES appears in the LCD display (2).
5. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
6. Press the desired device button (4). DEVICE? TV appears
in the LCD display (2).
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
Note:
For a television, press the device button TV (4), then continue
with step 8.
7. Press the up or down arrow button (6). The next device
appears in the LCD display (2).
8. Confirm the selection with the OK button (7). SEARCH
KEY? appears in the LCD display (2).
Note:
The remote control switches the device code every second
and sends an infrared signal. To set the time to three seconds,
press the CH button (17) twice during the next step.
9. Press the CH button (17) once. SEARCHING... appears
in the LCD display (2). The remote control automatically
searches for the device code for your device.
Note:
The remote control searches the device list in the forward direction.
To change the search direction, press "Minus" on the CH
button (17). To return to a forward search, press "Plus" on the
CH button (17).
10. As soon as your device reacts, press the OK button (7).
The device code is saved. SUCCESS appears in the LCD
display (2).
11. Press various buttons on the remote control to check the
setting. If your device only partially responds, repeat the
steps with the next device code.
Manual search
Manually search for the device code within the internal list of
the remote control.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the down arrow button (6) repeatedly until SEARCH
CODES appears in the LCD display (2).
5. Press the right arrow button (6). MODE KEY? appears on
the LCD display (2).
6. Press the desired device button (4). DEVICE? TV appears
in the LCD display (2).
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
Note:
For a television, press the device button TV (4), then continue
with step 8.
7. Press the up or down arrow button (6). The next device
appears in the LCD display (2).
8. Confirm the selection with the OK button (7). SEARCH
KEY? appears on the LCD display (2).
Note:
The remote control searches the device list in the forward direction.
To change the search direction, press "Minus" on the CH button
(17). To return to a forward search, press "Plus" on the CH
button (17).
9. Press the "Plus" CH button (17) repeatedly until your device
responds.
10. Press the OK button (7). The device code is saved.
SUCCESS appears in the LCD display (2).
11. Press various buttons on the remote control to check the
setting. If your device only partially responds, repeat the
steps with the next device code.
BRAND CODES
Select a manufacturer code from the "Manufacturer codes"
table. The table can be found at the end of the operating in-
structions.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the down arrow button (6) repeatedly until BRAND
CODES appears in the LCD display (2).
5. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
6. Press the desired device button (4). DEVICE? TV appears
in the LCD display (2).
Note:
For a television, press the device button TV (4), then continue
with step 8.
7. Press the up or down arrow button (6). The next device in
the list is displayed.
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
Note:
All entries in the device list can be found in the overview graphic.
8. Confirm the selection with the OK button (7).
BRAND CODES? appears in the LCD display (2).
9. Search for the manufacturer code in the "Manufacturer codes"
table in the appendix to these operating instructions.
10. Enter the manufacturer code with the number buttons
(13). SEARCH KEY? appears in the LCD display (2).
11.Press the CH button (17) until the device responds.
SEARCH... appears in the LCD display (2).
Note:
To change the search direction, press "Minus" on the CH button
(17).
12.Press the OK button (7). The device code is saved.
SUCCESS appears in the LCD display (2).
13. Press various buttons on the remote control to test the
functions. If your device only partially responds, repeat
steps 1 to 11 with a different manufacturer code from
the table.
Repeat steps 1 to 11 for all devices that you would like to
operate.
Entering device codes for combination devices
For combination devices, such as television/VCR or DVD/
VCR, it is necessary to enter a device code for each device
type.
Controlling combination devices
Some combination devices, such as TV/VCR or DVD/VCR,
have separate device buttons on the original remote control.
1. Press device button (4) DVD. The DVD signal is sent.
2. Press the S button (5). DVD (S) DATE 1: 1 appears in the
LCD display (2).
3. Press device button (4) DVD. The VCR signal is sent.
Note:
Not all devices support switching between two devices with
the S button (5).
Display device code
The current device code for each device can be displayed.
• Press and hold the device button (4). The LCD display (2)
shows DVD CODE 0768, for example.
Note:
Note the identified device code in the table "Personal device
codes" at the end of these operating instructions.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
TIMER SETUP – Timer functions
Program the automatic switch-off function SLEEPTIMER and
the automatic switch-on function "TIMER".
See the graphic "TIMER-SETUP overview“.
TV SLEEP SETUP
The SLEEPTIMER function automatically switches off the tele-
vision after the configured time has elapsed. The SLEEPTIMER
function can be set between 1 and 90 minutes.
TV SLEEP SET
Programming the SLEEPTIMER function.
1. Switch on the television.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the down arrow button (6) repeatedly until TIMER-
SETUP appears in the LCD display (2).
4. Press the right arrow button (6). TV SLEEP SETUP appears
in the LCD display (2).
TIMER-SETUP overview
5. Press the right arrow button (6). TV-SLEEP SET appears in
the LCD display (2).
6. Press the right arrow button (6). TV SLEEP TIME? appears
in the LCD display (2). The minutes value blinks.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
Note:
Select a value between 1 and 90 minutes.
7. Press the up or down arrow button (6) to set the minutes.
8. Press the right arrow button (6). SUCCESS and the Zzz symbol
(25) appear in the LCD display (2).
9. Point the remote control at the television. After the configured
number of minutes elapse, the remote control will switch
off the television.
10. Press the EXIT button (8) repeatedly until the standard dis-
play appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message
"TIMEOUT" appears in the LCD display (2). Then the standard
display is shown automatically.
TV SLEEP CLEAR
Switching off the SLEEPTIMER function for the television.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until TIMER-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). TV SLEEP SET appears
in the LCD display (2).
4. Press the right arrow button (6). TV SLEEP CLEAR appears
in the LCD display (2).
5. Press the right arrow button (6). CONFIRM CLEAR appears
in the LCD display (2).
6. Press the right arrow button (6). SUCCESS appears in the
LCD display (2).
7. Press the EXIT button (8) repeatedly until the standard dis-
play appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message
"TIMEOUT" appears in the LCD display (2). Then the stan-
dard display is shown automatically.
TIMER SETUP
Note:
If a timer is already programmed, this must be cleared.
See the section "TIMER X CLEAR“.
The remote control can be programmed with four timers.
Each timer can switch on one device.
Each timer can be programmed with up to three buttons in
sequence.
Download from Www.Somanuals.co2m2. All Manuals Search And Download.
TIMER X SET
Programming TIMER X. The "X“ is a placeholder and stands
for 1, 2, 3 or 4.
All settings are described using TIMER 1 as an example.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until TIMER-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). TV SLEEP SETUP appears
in the LCD display (2).
4. Press the down arrow button (6) until
TIMER 1 SETUP appears in the LCD display (2).
5. Press the right arrow button (6). TIMER 1 SET appears in
the LCD display (2).
6. Press the right arrow button (6). TIMER 1 TIME? 0:00 ap-
pears in the LCD display (2). The hours value blinks.
7. Press the up or down arrow button (6) to set the hours.
8. Press the right arrow button (6). The minutes value blinks.
9. Press the up or down arrow button (6) to set the minutes.
10. Press the right arrow button (6). TIMER 1 MODE? appears
in the LCD display (2).
11. Press the desired device button (4). TIMER 1 KEY 1
appears in the LCD display (2).
Note:
To save fewer than three buttons, press the OK button (7).
12. Press the desired buttons. The messages TIMER 1 KEY2,
TIMER 1 KEY3, SUCCESS, and then CODE-SETUP appear
in sequence on the LCD display (2).
13. Press EXIT (8) repeatedly until the device, day of the week
and time appear in the LCD display (2). The timer symbol
(24) also appears.
14. Point the remote control at the configured device. After
the time elapses, the remote control switches the device
on and executes the saved button sequence.
TIMER X CLEAR
Switching off programmed TIMER X. The "X“ stands for 1, 2,
3 or 4.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until TIMER-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). TV SLEEP SETUP appears
in the LCD display (2).
4. Press the down arrow button (6). TIMER 1 SETUP appears
in the LCD display (2).
Download from Www.Somanuals.co2m3. All Manuals Search And Download.
5. Press the down arrow button (6) repeatedly until the desired
TIMER appears in the LCD display (2).
6. Press the right arrow button (6). CONFIRM CLEAR appears
in the LCD display (2).
7. Press the right arrow button (6). First SUCCESS then
CODE SETUP appears in the LCD display (2).
8. Press the EXIT button (8) repeatedly until the standard
display appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message
"TIMEOUT" appears in the LCD display (2). Then the standard
display is shown automatically.
LEARN-SETUP – Learning functions
The universal remote control can learn the button signals of
an original remote control. Take note of the following points:
• The learning function can learn a maximum of 150
button signals.
• Use new batteries for the universal remote control and the
original remote control.
• Maintain a distance of at least one metre to other light
sources. The light sources could disrupt the infrared trans-
mission.
• You can extend the configured device codes using the l
earning function.
• Place the universal remote control and the original remote
control on a flat surface at a distance between 15 and
50 mm. See the graphic "Remote control spacing".
Remote control spacing
The "LEARN SETUP“ menu offers the following functions:
MODE LEARN – Learn buttons for a device.
MODE CLEAR – Clear learned buttons for a device.
ALL LEARN CLEAR – Clear learned buttons for all devices.
Download from Www.Somanuals.co2m4. All Manuals Search And Download.
LEARN SETUP overview
MODE LEARN
Note:
Execute "ALL LEARN CLEAR“ before executing "MODE LEARN“
for the first time. See section "ALL LEARN CLEAR“.
Learning the button signals of an original remote control.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until LEARN-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MODE LEARN appears
in the LCD display (2).
4. Press the right arrow button (6). MODE KEY appears in
the LCD display (2).
5. Press the desired device button (4). LEARN KEY appears
on the LCD display (2).
6. Press the desired button on the universal remote control.
For example, the playback button (14) PLAY. LEARNING
appears in the LCD display (2).
Download from Www.Somanuals.co2m5. All Manuals Search And Download.
Note:
If "LEARN ERROR“ appears in the LCD display (2), repeat the
learning function process starting from step 5.
7. Hold the button on the original remote control pressed
until first SUCCESS then LEARN MORE? appears in the
LCD display (2).
Note:
To end the learning function, press the EXIT button (8).
8. Press the right arrow button (6) to learn more buttons.
LEARN MORE? appears in the LCD display (2).
Repeat steps 5 to 7 to learn more buttons.
MODE CLEAR
Clearing the learned buttons of a device.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until LEARN-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MODE LEARN appears
on the LCD display (2).
4. Press the down arrow button (6) repeatedly until MODE
CLEAR appears in the LCD display (2).
5. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
6. Press the desired device button (4). CONFIRM CLEAR
appears in the LCD display (2).
7. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
ALL LEARN CLEAR
Clearing the learned buttons of all devices.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until LEARN-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MODE LEARN appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until ALL
LEARN CLEAR appears in the LCD display (2).
5. Press the right arrow button (6). CONFIRM CLEAR appears
in the LCD display (2).
6. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
Then the standard display appears.
Download from Www.Somanuals.co2m6. All Manuals Search And Download.
MACRO-SETUP – Macro functions
With the macro function, you can save a sequence of button
presses. The saved macro can be loaded with the MACRO button
(11) and the number buttons (13) 1, 2 or 3. The saved button
sequence is executed automatically.
An example of a button sequence would be:
• Switch on television.
• Change television channel.
• Switch on VCR.
• Record programme.
The macro function an store three different macros. Each
macro can contain a maximum sequence of ten buttons.
MACRO-SETUP overview
MACRO SET
Programming and saving a macro.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until MACRO-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MACRO SET appears in
the LCD display (2).
4. Press the right arrow button (6). MACRO KEY? appears in
the LCD display (2).
5. Press the number button (13) 1, 2 or 3. The LCD display (2)
shows MACRO 1 MOD.?, for example.
6. Press the desired device button (4). MACRO 1 KEY! 02
appears in the LCD display (2).
Download from Www.Somanuals.co2m7. All Manuals Search And Download.
Note:
After the tenth button press, the macro is automatically saved.
To save the macro at an earlier point, press the button MACRO
(11).
7. Press the desired button sequence. With each button
press, the counter goes up by one: MACRO1 KEY? 03,
MACRO 1 KEY? 04 etc. After the tenth button press, the
macro is saved and SUCCESS appears in the LCD display (2).
Note:
Note the programmed macros in the table "Personal macros"
at the end of these operating instructions.
Playing back a saved macro
Note:
The remote control must remain pointed at the device.
1. Press the MACRO button (11). MACRO KEY? appears in the
LCD display (2).
Note:
If no macro is saved under 1, for example, MACRO 1 VOID
appears in the LCD display (2).
2. Press the number button (13) 1, 2 or 3. The LCD display (2)
shows MACRO 1, for example. The infrared symbol (22)
blinks and the saved button sequence is sent.
MACRO CLEAR
Clearing a saved macro.
1. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until MACRO
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MACRO SET appears in
the LCD display (2).
4. Press the down arrow button (6). MACRO CLEAR appears
in the LCD display (2).
5. Press the right arrow button (6). MACRO KEY? appears
in the LCD display (2).
6. Press the number button (13) 1, 2 or 3. CONFIRM CLEAR
appears in the LCD display (2).
7. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
Download from Www.Somanuals.co2m8. All Manuals Search And Download.
Maintenance and Cleaning
Battery maintenance
Memory function
The device codes and learned buttons are retained during
a battery change.
The following are immediately deleted:
Time information and the lighting time for the backlight of the
LCD display (2).
These settings must be entered again after a battery change.
Change the batteries...
-
-
-
once per year.
when the LCD display (2) is difficult to read.
when the remote control does not react to button presses.
Cleaning the remote control
Warning!
If moisture enters into the device, the remote control
could be irreparably damaged!
Clean the housing and buttons of the remote control only
with a slightly damp cloth and a mild cleanser. Ensure that
no moisture enters the remote control during cleaning!
Disposal
Do not dispose of the device in your normal
domestic waste. This product is subject to the
European directive 2002/96/EC.
Dispose of the device through an approved disposal centre or
at your community waste facility.
Observe the currently applicable regulations. In case of doubt,
please contact your waste disposal centre.
Disposal of batteries
Used batteries/rechargeable batteries may not be disposed
of in household waste. Every consumer is legally obliged to
dispose of batteries at a collection site of his community/city
district or at a retail store.
The purpose of this obligation is to ensure that batteries are
disposed of in a non-polluting manner. Only dispose of batteries
when they are fully discharged.
Dispose of all packaging materials in an environ-
mentally friendly manner.
Download from Www.Somanuals.co2m9. All Manuals Search And Download.
Troubleshooting
Problem
Possible cause
Solution
Universal
Device (e.g. TV) is Check functioning
remote control defective.
does not
respond
of the device (e.g.
TV) with the origi-
nal remote control.
Batteries are
inserted
Insert the batteries
into the battery
incorrectly.
compartment with
the correct polarity.
Batteries are
empty.
Insert new
batteries.
Device codes Batteries are
are not saved. empty.
Insert new
batteries.
LCD display
(2) is dim.
Batteries are
empty.
Insert new
batteries.
Device only
partially reacts incorrect.
to a button
Device code is
Enter a different
device code of
the manufacturer.
press.
Searching for the
device code with
the AUTOSEARCH
function.
Buttons of an The distance be- Change the
original remote tween the remote distance.
control cannot controls is too
be learned.
large or too small.
The button on the Check functioning
original remote
control is not func- button.
tioning. Does the device
of the original
respond to pressing
the button on the
original remote
control?
Download from Www.Somanuals.co3m0. All Manuals Search And Download.
Technical data
Manufacturer:
Device type:
Model:
Kompernaß GmbH
10-in-1 universal remote control
KH 2150
10
Controllable devices
Dimensions L x W x H: 200 x 48 x 22 mm
Weight :
92 g
Infrared transmitter
frequency:
Range:
>100 kHz
8 m
Angle:
50°
Laser:
Laser class 1
Power supply
Battery:
2 x 1.5 V, type AAA/LR03 (micro)
Manufacturer codes
One manufacturer code applies to multiple manufacturers.
For example, enter the code 3 for a Sharp device.
Button
Manufacturer
1
2
3
4
5
6
Medion, Tchibo
Eye, Philco, Philips, Pye, Radiola
Akai, Daewoo, JVC, Panasonic,
Sharp, Sony, Toshiba
Brandt, Fergusson, Thomson
Nordmende, Saba, Telefunken
Blaupunkt, Grundig
Download from Www.Somanuals.co3m1. All Manuals Search And Download.
Personal macros
Macro button
2
Steps
1
3
1
2
3
4
5
6
7
8
9
10
Personal device codes
Button
Device
Device code
TV
DVD
VCR
CBL
#
ASAT
DSAT
AUX 1
CD
AMP
AUX 2
Download from Www.Somanuals.co3m2. All Manuals Search And Download.
Conformity
The first party placing the product KH 2150 and all its acces-
sories on the market and bearing responsibility in accordance
with the German Equipment and Product Safety Act (GPSG)
as well as for compliance with the directives on use of the CE
mark is:
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
The conformity declaration can be requested from the first
party placing the product on the market.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
Download from Www.Somanuals.co3m3. All Manuals Search And Download.
Warranty and Service
You receive a 3-year warranty for this device as of the purchase
date. Should you have grounds for complaint in spite of our
high quality standards, please contact our Service Hotline.
In the event that processing of your complaint is not possible
by telephone here you will receive
• a processing number (RMA number) as well as
• an address, to which you can send your product for
warranty processing.
In the case of a mail-in shipment, please enclose a copy of
the purchase receipt (sales slip). The device must be securely
packed and rhe RMA number clearly visible. Products sent in
without the RMA number cannot be processed.
Note:
The warranty provisions cover only material or factory
defects.
The warranty is not valid;
• for worn out parts
• damage to breakable parts like switches or
rechargeable batteries.
This product is for private use only and is not intended for
commercial use. In the event of misuse and improper handling,
use of force and manipulations not carried out by our authorised
service centre, the warranty will become void.
Your statutory warranty claims are not restricted by this warranty.
Download from Www.Somanuals.co3m4. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|