Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-MP110E Micro Component System consisting of XL-MP110E (main
unit) and CP-MP110E (speaker system).
MICRO COMPONENT SYSTEM
MODEL
XL-MP110E
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop aerial
1
FM aerial
1
Note:
Only the above accessories are included.
03/12/17
XL-MP110E_FRONT.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
XL-MP110E
ꢀ General
ꢁHold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
ꢁPlease ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 10 cm (4") of free space
along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
ꢁDo not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
/
10 cm (4")
ꢁUse the unit on a firm, level surface free from
vibration.
ꢁThe ventilation should not be impeded by
covering the ventilation openings with
items, such as newspapers, tablecloths,
curtains, etc.
ꢁNo naked flame sources, such as lighted candles, should be
placed on the apparatus.
ꢁAttention should be drawn to the environmental aspects of battery
disposal.
ꢁThis unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
ꢁKeep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
ꢁDo not place anything on top of the unit.
ꢁDo not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
Warning:
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.
ꢁIf your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
ꢁIn case of an electrical storm, unplug the
unit for safety.
ꢀ Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs whilst turning the unit on
with the volume control setting up high, or whilst continually listening
at high volumes.
8
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
XL-MP110E
ꢀ Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 13, 27, 30
5. Tape Record Pause Button . . . . . . . . . . . . . . . . . . . . . . 25, 34
6. Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 14
9. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 14
10. CD Direct Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
13. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 27
14. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 12
15. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . . 12, 34
16. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
17. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
18. Disc Track Down or Fast Reverse, Tape Rewind,
/
Tuner Preset Down, Time Down Button . . . 13, 16, 22, 24, 27
19. Disc Track Up or Fast Forward,Tape Fast Forward,
Tuner Preset Up,Time Up Button . . . . . . . . 13, 16, 22, 24, 27
20. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
21. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
22. Disc Play or Repeat, Tape Play Button . . . . . . . . . 14, 19, 24
23. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 34
24. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22
25. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . 16, 24
CD
25
4
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ Display
Reference page
10
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. Disc Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Tape Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
11. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
12. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
13. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 28
14. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
15. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 21
16. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
17. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 21
11 12 13
1
2 3 4 5
6 7 8
9
14
15 16 17
8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Controls and indicators (continued)
ꢀ Rear panel
Reference page
1. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . 31
6. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Subwoofer Pre-output Socket . . . . . . . . . . . . . . . . . . . . . . . 32
3
ANTENNA
AM
LOOP
FM
75 OHMS
4
VIDEO/AUX
IN
RIGHT
LEFT
5
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
6
7
1
2
AC INPUT
SUBWOOFER
PRE-OUT
RIGHT LEFT
ꢀ Speaker system
1. Tweeter
1
2
3
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ Remote control
Reference page
1
2
11
12
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 12, 20
3. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 14
4. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7. Disc Track Down or Fast Reverse,Tape Rewind,
Tuner Preset Down,Time Down Button . . . . . . 13, 16, 22, 24
8. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 12
9. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 18
11. Memory Button . . . . . . . . . . . . . . . . . . . . . . . 13, 20, 22, 27, 30
12. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
13. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
15. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
16. Disc Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . 14, 19
17. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
18. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
19. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
20. Tape Record Pause Button . . . . . . . . . . . . . . . . . . . . . . 25, 26
21. Disc Track Up or Fast Forward,Tape Fast Forward,
3
4
13
14
15
16
17
18
19
20
21
22
23
24
5
6
7
8
9
10
Tuner Preset Up,Time Up Button . . . . . . . . . . . 13, 16, 22, 24
22. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 12
23. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 13, 27, 30
24. MP3/WMA Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
XL-MP110E
Make sure to unplug the AC power lead before any connections.
Aerial connection (see page 9)
AM loop aerial
FM aerial
Right speaker
Left speaker
ANTENNA
AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
LEFT
RIGHT
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
SUBWOOFER
PRE-OUT
RIGHT LEFT
Speaker connection (see page 9)
Wall socket
(AC 230 - 240 V, 50 Hz)
AC power connection (see page 10)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ Aerial connection
ꢀ Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
ANTENNA
AM
LOOP
FM
75 OHMS
Connect the AM loop aerial to the AM LOOP socket. Position the AM
loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
VIDEO/AUX
IN
LEFT
RIGHT
RATED SPEAKER IMPEDANCE:
OHMS MIN.
6
AC INPUT
SUBWOOFER
PRE-OUT
R
I
G
H
T
L
E
F
T
Red
Black
Caution:
ꢁUse speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
ANTENNA
AM
LOOP
FM
75 OHMS
FM
75 OHMS
VIDEO/AUX
IN
LEFT
RIGHT
ꢁDo not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
RATED SPEAKER IMPEDANCE:
OHMS MIN.
6
AC INPUT
SUBWOOFER
PRE-OUT
R
I
G
H
T
L
E
F
T
ꢁDo not let the bare speaker wires touch
each other.
ꢁDo not allow any objects to fall into or to be
placed in the bass reflex ducts.
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
ꢁDo not stand or sit on the speakers. You may
Incorrect
be injured.
Installing the AM loop aerial:
< Assembling >
ꢀ Speaker grilles are removable
< Attaching to the wall >
Make sure nothing comes into contact
with the speaker diaphragm when you
remove the speaker grilles.
Wall Screws (not supplied)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
System connections (continued)
ꢀ AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
ꢀ Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
ANTENNA
AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
LEFT
RIGHT
RATED SPEAKER IMPEDANCE:
OHMS MIN.
6
AC INPUT
SUBWOOFER
PRE-OUT
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
RIGHT LEFT
Wall socket
(AC 230 - 240 V, 50 Hz)
Note:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
Notes:
ꢁThe unit will start the tape initialisation when plugged in to the wall
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
ꢁUnplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
ꢀ External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
ANTENNA
AM
LOOP
Cooling fan:
FM
75 OHMS
This main unit is built with a cooling fan at the rear of the unit for
improved cooling. Please do not cover the opening of the fan with
any obstacles, as this will block proper ventilation.
External FM aerial
VIDEO/AUX
IN
RIGHT
LEFT
RATED SPEAKER IMPEDANCE:
OHMS MIN.
6
AC INPUT
SUBWOOFER
PRE-OUT
RIGHT LEFT
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
XL-MP110E
Notes concerning use:
ꢁReplace the batteries if the operating distance is reduced or if the
operation becomes erratic.
ꢁPeriodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
ꢀ Battery installation
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
ꢁExposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
ꢁKeep the remote control away from moisture, heat, shock, and vi-
brations.
1
2
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment (back of the battery cover).
When inserting or removing the batteries, push them towards the
battery terminals.
3
Close the cover.
ꢀ Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 10).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Precautions for battery use:
ꢁReplace all old batteries with new ones at the same time.
ꢁDo not mix old and new batteries.
/
ꢁRemove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
ꢁDo not use rechargeable batteries (nickel-cadmium battery, etc.).
ꢁInstalling the batteries incorrectly may cause the unit to malfunc-
tion.
Battery removal:
Open the battery cover and pull up the battery to take out.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
General control
ꢀ Volume control
Main unit operation:
/
When the VOL +/- control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
/
.....
0
30 MAXIMUM
ꢀ Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
ꢀ Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
ꢀ To turn the power on
Press the ON/STAND-BY button to turn the power on.
FLAT
No equalisation.
For rock music.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
After use:
ROCK
CLASSIC
POPS
VOCAL
JAZZ
Press the ON/STAND-BY button to enter the power stand-by
mode.
ꢀ To change the display brightness
You can switch the display brightness by pressing the CLEAR/
DIMMER button more than 2 seconds.
ꢀ Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
XL-MP110E
5 Press the
or
button to adjust the hour and
/
then press the MEMORY/SET button.
Press the
or
button once to advance the time by
/
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
In this example, the clock is set for the 24-hour (0:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
3 Within 10 seconds, press the
or
button to se-
[When the power is on]
lect "CLOCK", and press the MEMORY/SET button.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the
time
.
The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
4 Press the
or
button to select 12-hour or 24-
hour display and then press the MEMORY/SET button.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour dis-
play) will be skipped.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
To change the 12-hour or 24-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the
"AM 12:00"
"AM 0:00"
memory (reset)" on page 34 for details.]
2
Perform "Setting the clock" from step 1.
Note:
The clock can also be set with the remote control.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
XL-MP110E
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
/
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
ꢁThis system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
ꢁDuring VBR file playback, time counter in the display may differ
from its actual playback time.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for Win-
dows Media Player.
Notes:
ꢁ"MP3" or "WMA" indicator will light up after the unit reads infor-
mation on an MP3 or WMA disc.
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁCD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
ꢁCD
playback starts (regardless of the last function).
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
/
button on the remote control: The unit turns on and CD
ꢁ
/
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢁPlayback will begin from track 1 on DISC 1. After that disc fin-
ishes playing, the next disc will automatically play.
ꢁAfter the last track on the fifth disc is played, the unit will stop
automatically.
ꢁWhen there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the disc on the disc tray 1, label side up.
To exchange other discs whilst playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
12 cm (5")
8 cm (3")
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Caution:
5 Press the OPEN/CLOSE button to close the disc tray 1.
ꢁDo not place two discs in one disc tray.
ꢁDo not play discs of special shapes (heart, octagon, etc). It may
cause malfunctions.
CD indicator
MP3 indicator
[CD]
[MP3/WMA]
ꢁDo not push the disc tray whilst it is moving.
ꢁIf the power fails whilst the tray is open, wait until the power is re-
stored.
ꢁIf the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
ꢁIf TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
ꢁIf a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
WMA indicator
Total number of
tracks on the disc time of the disc
Total playing
Total number
of track
ꢁDue to the structure of its disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6 You can place discs on the trays 2 - 5 by following steps
3 - 5.
7 Press the
/
button to start playback.
Disc play indicator
15
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Listening to a CD or MP3/WMA disc (continued)
Notes for CD:
ꢀ Various disc functions
ꢁTrack up/track down is possible only within individual discs.
ꢁFast forward/fast reverse is possible only within individual discs.
ꢁWhen the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
Notes for MP3/WMA discs:
Stop
Press in the playback
mode.
ꢁTrack up/track down is possible only within individual discs.
ꢁThe sound is heard during fast forward/fast reverse with a CD, but
not with an MP3/WMA disc. For fast forward or fast reverse of an
MP3/WMA disc, refer to playback time on the display.
ꢁFast forward/fast reverse is possible only within individual tracks.
ꢁWhen the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its be-
ginning is reached during fast reverse.
Pause
Press in the playback
mode. Press the
/
button to resume play-
back from the paused
point.
Track up/
Track down
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ To change the display (MP3/WMA discs only) ꢀ To select the desired folder or track by name
Whilst in the stop mode or playback mode, press the DISPLAY
(MP3/WMA discs only)
button.
Each time the button is pressed, the display will change as follows.
1 Whilst in the stop mode, press the DISPLAY button to
display the folder name.
2
Select the desired folder by pressing the
button.
(
) or
) or
(
)
[When in the stop mode]
3 Press the DISPLAY button to
display the track name.
Total number of tracks
Folder name
4 Select the desired track by pressing the
button.
(
(
)
Track name
5 Press the
/
(CD
/
) button
to begin playback.
[When in the playback mode]
Note:
After selecting a disc with one of the 1 - 5 buttons, the display
will not change even if the DISPLAY button is pressed, and neither
the folder nor track name is displayed.
Track number Elapsed playback
time
Folder name
Track name
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback
XL-MP110E
ꢀ To specify a disc to play
ꢀ Direct track search
You can play a disc by specifying the disc number.
By using the direct search buttons, the desired tracks on the current
disc can be played.
1 Press one of the 1 - 5 buttons to select the desired disc.
Use the direct search buttons on
the remote control to select the de-
sired track whilst playing the se-
lected disc.
Selected track number
Selected disc number
ꢁThe direct search buttons allow you to select up to number 9.
2 Within 5 seconds, press the CD DIRECT PLAY button on
the main unit.
ꢁWhen selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
/
If the direct search buttons are pressed whilst the disc is stopped,
press the
/
button to start the desired track on the current disc.
ꢁPlayback will begin from track 1 on the chosen disc.
ꢁAfter the last track on the chosen disc is played, the unit stops
automatically.
Notes:
ꢁA track number higher than the number of tracks on the disc can-
not be selected.
Note:
ꢁDuring random play, direct search is not possible.
If a disc tray with no disc is selected, playback will not start and the
disc indicator will go out.
To stop playback:
Press the (CD ) button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a
programmed sequence continuously.
ꢀ Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat all tracks on up to 5 discs:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page 20 and
then press the
/
button twice.
To cancel random play:
Press the
/
(CD
/
) button.
"NORMAL" will appear for 2 seconds.
To random play all tracks on the chosen disc:
1 Press one of the 1 - 5 buttons.
2 Within 5 seconds, press the CD DI-
RECT PLAY button.
To cancel repeat play:
Press the button again.
" will go out.
/
"
3 Press the RANDOM button on the re-
mote control.
To repeat all tracks on the chosen disc:
To cancel random play:
1 Press one of the 1 - 5 buttons.
Press the CD DIRECT PLAY button.
"NORMAL" will appear for 2 seconds.
2 Within 5 seconds, press the CD DIRECT
PLAY button twice.
Notes:
To cancel repeat play:
ꢁIf you press the
button during random play, you can move to
Press the CD DIRECT PLAY button again.
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The be-
ginning of the track being played will be located.
ꢁIn random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
"
" will go out.
Caution:
After performing repeat or random play, be sure to press the (CD
) button. Otherwise, the disc(s) will play continuously.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Advanced CD or MP3/WMA disc playback (continued)
ꢀ Programmed play
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control whilst the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
You can choose up to 32 selections for playback in the order you like.
1 Whilst in the stop mode, press
the MEMORY/SET (MEMORY)
button to enter the programming
save mode.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY" in-
dicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or
button.
Selected track number
You can also select a track by pressing the
or
button.
Notes:
ꢁWhen a disc with programmed tracks is ejected, the programme
is automatically cancelled.
ꢁEven if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
ꢁDuring the programme operation, random play is not possible.
ꢁDuring programmed play, the CD DIRECT PLAY button will not
work.
4 Press the MEMORY/SET
(MEMORY) button to save the
track number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the (CD ) button.
The total number of memory will
appear.
7 Press the
/
button to start playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
XL-MP110E
ꢀ Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
/
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
/
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
ꢁWhen radio interference occurs, auto scan tuning may stop auto-
matically at that point.
ꢁAuto scan tuning will skip weak signal stations.
ꢁTo stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
ꢁ" " will appear when an FM broadcast is in stereo.
ꢁIf the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
Auto power on function:
FM stereo mode indicator
When you press any of the following buttons, the unit turns on.
ꢁTUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
Note:
FM stereo receiving indicator
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Listening to the radio (continued)
ꢀ Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
ꢀ To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
ꢀ To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Perform steps 1 - 3 in "Tuning" on page 21.
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
/
/
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
ꢀ To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
Note:
Whilst pressing down the
button, press the TUNING
button and the X-BASS/DEMO
button until "TUNER CL" appears.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape
XL-MP110E
ꢀ Tape playback
Before playback:
ꢁFor playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TAPE button.
ꢁDo not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
ꢁBefore loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
3 Open the cassette door by push-
ing the area marked " PUSH
EJECT".
4 Load a cassette into the cas-
sette compartment with the side
to be played on facing you.
/
/
5 Press the
/
(
) button.
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁTAPE button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
ꢁTAPE button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a cassette tape
XL-MP110E
Listening to a cassette tape (continued)
ꢀ Various tape functions
Before recording:
ꢁWhen recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
Function
Main unit
Remote
control
Operation
ꢁSHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Playback
Press in the stop
mode.
ꢁThe volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
ꢁFor recording, use only normal tapes. Do not use metal or
CrO tapes.
Stop
Press in the playback,
fast forward or rewind
mode.
Erase-prevention tab of cassette tapes:
ꢁWhen recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
Fast for-
ward/
Rewind
Press in the playback
or stop mode.
ꢁTo protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Caution:
ꢁTo remove the cassette, press the (TAPE ) button, and then
open the compartment.
ꢁIf a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
Tab for side A
Tab for side B
24
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ Recording from a CD or MP3/WMA disc
You can record the desired disc using the CD DIRECT PLAY button.
/
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
/
3 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the
button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the CD DIRECT PLAY button to
start recording.
ꢁRecording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
ꢁPlayback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Recording on a cassette tape (continued)
Recording from several CDs continuously:
ꢀ Recording from the radio
1 Perform steps 1 - 5 in "Recording from a CD or MP3/WMA disc"
on page 25.
1 Tune in to the desired station (see page 21).
2 Within 5 seconds, press the
ing.
/
(TAPE ) button to start record-
2 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
To perform programmed recording:
Wind past the leader of the tape, on which recording cannot be
performed.
1 Programme discs and tracks (see page 20).
2 Press the
3 Press the
button.
3 Press the
button.
/
(TAPE ) button to start recording.
Recording will be paused.
To stop recording:
Press the (TAPE ) button.
The CD and tape will stop.
4 Press the
/
(TAPE ) button to start recording.
To interrupt recording:
Press the
To resume recording, press the
button.
/
(TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
ꢀ Erasing recorded tapes
1
2
Press the TAPE button.
Follow steps 2 - 4 in "Recording from the radio".
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation
XL-MP110E
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at a
preset time.
/
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
/
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a programme on a
radio station.
ꢀ Timer playback or timer recording
Before setting timer:
Daily timer: Daily timer play or daily timer recording works at
1 Check that the clock is set to the correct time (refer to page 13).
If it is not set, you cannot use the timer function.
the same preset time every day.
For example, set the timer as a wake-up call every morning.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the cas-
sette compartment.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and
use the daily timer to wake up.
1
2
Set the daily timer (pages 27 - 29).
Set the once timer (pages 27 - 29).
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute or more
Daily timer
3 Within 10 seconds, press the
or
button to se-
lect "ONCE" or "DAILY", and press the MEMORY/SET but-
ton.
Once timer
Start
Note:
Stop
Start
Stop
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between op-
erations.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
Continued to the next page
27
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Timer and sleep operation (continued)
4 Within 10 seconds, press the
or
button to se-
9 Switch input with the
or
button, and then
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER or TAPE.
To select the timer recording source: TUNER.
ꢁWhen you select the tuner, select a station by pressing the
or
button, and then press the MEMORY/SET
button.
5 Press the
or
button to select "PLAY" or
"REC", and press the MEMORY/SET button.
ꢁIf a station has not been programmed, "NO P.SET" will be
displayed and timer setting will be cancelled.
White
Red
10Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
The illustrations show the daily timer setting.
11Press the ON/STAND-BY button to enter the power stand-
by mode.
6 Press the
or
button to adjust the hour and
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the
or
button to adjust the minutes and
/
then press the MEMORY/SET button.
Continued to the next page
8 Set the time to finish as in steps 6 and 7 above.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Checking the timer setting in the timer stand-by mode:
12When the preset time is reached, playback or recording will
start.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
The volume will increase gradually until it reaches the preset
volume.
3 Within 10 seconds, press the or button to select
"ONCE CAL" or "DAILY CAL", and press the MEMORY/SET but-
13When the timer end time is reached, the system will enter
ton.
the power stand-by mode automatically.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Once timer:
The timer will be cancelled.
Daily timer:
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is cancelled. Cancel the daily tim-
er when it is not in use.
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be cancelled (the setting will not be cancelled).
Note:
When performing timer playback or recording using another unit con-
nected to the VIDEO/AUX IN sockets, select "VIDEO" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Timer and sleep operation (continued)
To cancel the sleep operation:
ꢀ Sleep operation
The radio, compact disc and cassette tape can all be turned off au-
tomatically.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
1
2
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY/SET button.
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
ꢀ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
4 Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
ꢁ3 hours - 5 minutes 5-minute intervals
ꢁ5 minutes - 1 minute 1-minute intervals
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.
5 Press the MEMORY/SET but-
ton.
1
2
Set the sleep time (see left, steps 1 - 5).
"SLEEP" will appear.
Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 27 - 28).
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
Timer playback or
The volume will be turned down 1 minute before the sleep op-
eration finishes.
recording setting
Sleep timer setting
End time
Desired time
To confirm the remaining sleep time:
1 minute - 3 hours
1
2
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
"SLEEP X : XX".
or
button to select
Sleep operation will
automatically stop.
Timer playback or recording
start time
"X : XX" is sleep remaining time.
Caution:
ꢁThe remaining sleep time is displayed for about 10 seconds.
ꢁYou can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
XL-MP110E
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
ꢀ Listening to the playback sounds from VCR,
DVD, etc.
VCR, DVD, etc.
1 Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
To the line
output sockets
2 Press the ON/STAND-BY button to turn the power on.
3 Press the VIDEO/AUX button.
ANTENNA
AM
LOOP
FM
75 OHMS
White
Red
VIDEO/AUX
IN
RIGHT
LEFT
4 Play the connected equipment.
PEDANCE:
Red White
.
Note:
AC INPUT
RCA lead
(not supplied)
SUBWOOFER
PRE-OUT
RIGHT LEFT
To prevent noise interference, place the unit away from the televi-
sion.
ꢀ To record on a tape
1 Insert a cassette in the cassette compartment.
2 Press the VIDEO/AUX button.
3 Press the
4 Press the
/
/
button.
) button.
/
(
5 Play the VCR, DVD, etc.
ꢀ Headphones
ꢁBefore plugging in or unplugging the headphones, reduce the vol-
ume.
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁVIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.
ꢁBe sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.
ꢁPlugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
XL-MP110E
Enhancing your system (continued)
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
ꢀ Subwoofer connection
When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
ꢀ General
Symptom
ꢁThe clock is not set to the ꢁDid a power failure occur? Reset
correct time. the clock.
ꢁWhen a button is pressed, ꢁSet the unit to the power stand-
Possible cause
ANTENNA
AM
the unit does not respond.
by mode and then turn it back on.
LOOP
FM
75 OHMS
VIDEO/AUX
IN
RIGHT
ꢁIf the unit still malfunctions, reset
LEFT
it.
ꢁNo sound is heard.
ꢁIs the volume level set to "0"?
RATED SPEAKER IMPEDANCE:
OHMS MIN.
6
ꢁAre the headphones connected?
AC INPUT
SUBWOOER
PRE-OT
RIGHT LEFT
ꢁAre the speaker wires discon-
nected?
ꢀ CD player
Symptom
Possible cause
Speaker with a
built-in amplifier
ꢁPlayback does not start. ꢁIs the disc loaded upside down?
ꢁPlayback stops in the mid- ꢁDoes the disc satisfy the stan-
dle or is not performed
properly.
dards?
ꢁIs the disc distorted or
scratched?
ꢁPlayback sounds are
skipped, or stopped in the
middle of a track.
ꢁIs the unit located near excessive
vibrations?
ꢁIs the disc very dirty?
ꢁHas condensation formed inside
the unit?
32
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
ꢀ Cassette deck
ꢀ Tuner
Symptom
Possible cause
Symptom
Possible cause
ꢁCannot record.
ꢁIs the erase-prevention tab re-
moved?
ꢁThe radio makes unusual ꢁIs the unit placed near the TV or
noises continuously.
computer?
ꢁCannot record tracks with ꢁIs it a normal tape? (You cannot
ꢁIs the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
proper sound quality.
ꢁCannot erase completely.
ꢁSound skipping.
record on a metal or CrO tape.)
ꢁIs there any slack?
ꢁIs the tape stretched?
ꢀ Condensation
ꢁCannot hear treble.
ꢁAre the capstans, pinch rollers,
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
or heads dirty?
ꢁSound fluctuation.
ꢁCannot remove the tape. ꢁIf a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
ꢀ Remote control
Symptom
Possible cause
ꢁThe remote control does ꢁIs the AC power lead of the unit
not operate.
plugged in?
ꢁIs the battery polarity correct?
ꢁAre the batteries dead?
ꢁIs the distance or angle incor-
rect?
ꢁDoes the remote control sensor
receive strong light?
33
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP110E
Troubleshooting chart (continued)
ꢀ If trouble occurs
ꢀ Before transporting the unit
When this product is subjected to strong external interference (me-
chanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunc-
tion.
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
ꢀ Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
ꢁDo not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
ꢁKeep your discs away from direct sunlight, heat, and excessive
moisture.
ꢁAlways hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
ꢀ Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
Whilst pressing down the
ton, press the TUNING button until "CLEAR AL" appears.
button and the X-BASS/DEMO but-
NO
YES
Correct
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
XL-MP110E
ꢀ Cleaning the tape-handling parts
ꢀ Cleaning the cabinet
ꢁDirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
ꢁWhen cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
ꢁDo not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
ꢁDo not apply oil to the inside of the unit. It may cause malfunc-
tions.
B
A
D
C
Pinch roller
Capstan
Erase head
Recording/Playback head
ꢁAfter long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
XL-MP110E
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Frequency
response
Dynamic range
20 - 20,000 Hz
90 dB (1 kHz)
ꢀ Tuner
ꢀ General
Frequency range
FM: 87.50 - 108.00 MHz
AM: 522 - 1,620 kHz
Power source
Power
consumption
AC 230 - 240 V, 50 Hz
100 W
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
ꢀ Cassette deck
Frequency
response
50 - 14,000 Hz (normal tape)
Weight
6.1 kg (13.4 lbs.)
Signal/noise ratio
Wow and flutter
50 dB (recording/playback)
0.3 % (WRMS)
ꢀ Amplifier
Output power
MPO: 182 W (91 W + 91 W) (10 % T.H.D.)
RMS: 100 W (50 W + 50 W) (10 % T.H.D.)
RMS: 76 W (38 W + 38 W) (0.9 % T.H.D.)
ꢀ Speaker
Type
2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
100 W
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Maximum input
power
Input terminals
Video/Auxiliary (audio signal):
500 mV/47 k ohms
Rated input power 50 W
Impedance
Dimensions
6 ohms
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 205 mm (8-1/16")
ꢀ CD player
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
Weight
2.4 kg (5.3 lbs.)/each
D/A converter
1-bit D/A converter
36
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
CD-MEMO.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
CD-MEMO.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR LOCATION ENQUIRIES WITHIN
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
OR CALL SHARP CUSTOMER CARE
1300 135 022
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
(LOCAL CALL COST APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
MPX110E_BacK
1
12/23/04, 9:48 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the
date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
IMPORTANT
SHARP CORPORATION OF
NEW ZEALAND LIMITED
59 Hugo Johnston Drive
Penrose, Auckland
DO NOT RETURN THIS DOCUMENT TO SHARP
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
Model No.
Serial No.
Date of Purchase
Retailer
SHARP CORPORATION OF
AUSTRALIA PTY. LIMITED
ABN 40 003 039 405
SPform014 (JUNE 2004)
1 Huntingwood Drive
Huntingwood NSW 2148
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
SHARP CORPORATION
TINSE A089 AWZZ
04M R KI 1
MPX110E_BacK
2
12/23/04, 9:48 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|