LC-45GD5U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly
from the actual operations.
• Menu items that are not selectable are grayed out.
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please record
the TV’s model and serial numbers in the space
provided. The numbers are located at the rear of the
TV.
Serial No.:
IMPORTANT INFORMATION
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-head
symbol, within an equilateral
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television.To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully
before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of
your Liquid Crystal Television, please read the following precautions carefully before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Additional Safety Information
15) Power Sources — This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
16) Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry — Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18) Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this indicates a need for service.
19) Replacement Parts — When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check — Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting — When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
• Water and Moisture — Do not use this product near water – for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the
like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the
product on an unstable base can cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware
recommended by the manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do
not cover or block these vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when
the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the panel breaks.
• Heat — The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 6,220,800 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speaker. Be sure to always
carry the TV by two people holding it with two hands—one hand on each side of the TV.
• Lightning — For added protection for this television equipment during a lightning
storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC —NATIONAL ELECTRICAL CODE
(NEC ART 250, PART H)
• To prevent fire, never place any type of candle or flames on the top or near the TV
set.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other
heavy items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface of the TV panel. Using a hard cloth
may scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
• If the panel is dusty, use an anti-static brush, which is commercially available, to
clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to
clean it, such materials may damage the panel surface.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
It’s best to use 2 people to remove the AQUOS television for stability.
1. Use the cardboard holders on either side of the AQUOS television to remove it
from the box.
2. Remove the cardboard; however, keep the wrapping on the AQUOS television to
protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a
heat source or use near water. The AQUOS television is designed for AC use only and
should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently
wipe and avoid pressing on the screen. To clean the outer cabinet, use the same
method. Do not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Facing the back of the AQUOS television, remove
4. Bundle the cords properly with a cable clamp and
cable tie, and close the terminal cover.
the terminal cover.
Press down the
upper hooks to
remove the cover
toward you.
2. Attach your antenna to the back of the TV. (See
page 17.)
3. Connect the AC plug for the AQUOS television
into the wall outlet.
5. How to turn on the AQUOS television for the first
time.
A) Press POWER on AQUOS television.
POWER
CAUTION
B) POWER indicator on the front of the AQUOS
television lights blue.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLESWITH
THE AC CORD CONNECTED.
POWER indicator
NOTE
• The TV can be swiveled 5 degrees right and left with TV
stand attached.
• You cannot tilt the screen vertically.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
Attaching speakers
1
4
Fasten the speaker cable with the holder.
Connect the ends of the cable to the speaker
terminals as shown in the illustration.
Remove the terminal cover as shown in the
illustration.
Connect leads to speaker terminals of the same color.
2
5
Insert the projecting bulges on the side of the
Attach the terminal cover as shown in the
speakers into the corresponding slots in the display. illustration.
Screw
(SILVER)
3
Fasten the screw.
CAUTION
• Do not remove the stand and speaker from the TV unless using an optional bracket to mount it.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• Perform the same steps for right speaker.
• To remove the speakers, perform the steps in reverse order.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two “AAA” size batteries 3 Close the battery cover.
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with
skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
16n4o
(5 m)
Remote control sensor
30°
30°
IMPORTANT:
The POWER indicator on the AQUOS television should light blue indicating you have power to the AQUOS
television.
If the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ setup and basic channel setup functions
and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your
AQUOS operation manual.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
TV GUIDE ON SCREEN™ QUICK SETUP SHEET
Once you set up theTV according to this operation manual, you are ready to set upTV Guide On Screen!
Note: TV Guide On Screen™ interactive program guide supports cable-ready, cable box and digital cable
services as well as over-the-air broadcast. It does not provide listings for satellite services.
After completing the TV’s initial set up, you see the TV
2
Find the VCR and Cable Box IR Sensors.
Guide On Screen Setup Welcome Screen.
To control recording, find the VCR’s IR sensor.
Note: If TV Guide On Screen is not set up, pressing TV
1 Turn the VCR off.
GUIDE while watching TV will display the Welcome
2 Hold the VCR remote so that it touches the
Screen.
front of the VCR (Figure 1).
3 Move the remote across the front while
pressing POWER (Figure 2). (You must press
and release the power button each time you
move the remote; holding down the button will
not work).
4 When the VCR powers on, you have found
the sensor.
5 Remember the location of the sensor, and go
to step 3.
If you have a cable box, repeat this procedure
using the cable box and its remote, and then
go to step 3.
Follow the on-screen instructions
If you previously skipped TV Guide On Screen setup,
you see the Reminder Screen.
Figure 1
Figure 2
Correct
Incorrect
3
Place the G-LINK cable(s)
To control a VCR, place one of the G-LINK
wands underneath the VCR approximately 1
inch in front of the sensor you found in step 2.
If you have a cable box, place the other G-
LINK wand approximately 1 inch in front of
the sensor you found in step 2.
Note: If you press ENTER and the screen does not
change, make sure that the batteries in the remote
control are properly installed.
If you need to control a cable box and/or a VCR,
complete steps 1 through 3. If not, go to step 4.
Use the double-sided tape to secure each
G-LINK cable.
1
Find and Connect the included G-LINK cable
into the G-LINK terminal.
This end is connected to the TV as
shown in step 1.
G-LINK cable with
Double-Sided Tape
VCR
or
Cable Box
G-LINK
cable
1 inch
G-LINK wand
G-LINK cable
4
Use the TV remote for On-Screen Setup
1 Press a/b/c/d and ENTER to highlight an
item in a Setup screen.
2 Press ENTER to select that item.
a/b/c/d
ENTER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
On-Screen Setup
• TV Guide uses setup information to provide TV listings and lineups.
9
This screen asks you about a VCR.
If the answer is “YES”, you
are directed through
additional screens, which
include selecting and
5
The first two screens ask you about your
location.
Follow the on-screen
instructions.
verifying the VCR brand.
When successfully
completed, you next see
the screen in step 10 which asks about confirming all
of your settings.
Press c/d to move the
highlight.
Press 0-9 or a/b to enter
a ZIP Code or Postal
Code.
If the answer is “NO”, you next see the screen in step
10 which asks about confirming all of your settings.
10
This screen asks you to confirm that the
settings are correct.
If the answer is “YES”, you
next see the screen in step
11.
6
These screens ask you about cable.
If the answer is “YES”, you
next see a screen about a
cable box.
If the answer is “NO”, you
next see the screen in step
7 which asks about an
antenna connection.
If the answer is “NO”, you
are returned to step 5 from
where you can change any
incorrect information by
repeating the Setup process.
If the answer is “YES”, you
are directed through
additional screens, which
include selecting the input
used on the TV for the
cable box and verifying the
cable box and verifying the
cable box brand. When successfully completed, you
next see the screen in step 7 which asks about an
antenna connection.
• Please refer to the note on step 3 in page 22 for
details.
11
This screen indicates you have successfully
completed setup for TV Guide On Screen.
Important: Power off your
recorder overnight and if
you have a cable box,
leave it on.
Within 24 hours, you will
begin to receive TV
program listings.
Note: If you have a cable box, it is normal for
the TV to switch channels on the cable box
while the unit is setting up. DO NOT interfere
with the process. If you want to resume TV
viewing and stop the TV from changing
channels, you need to power on the TV.
If the answer is “NO”, you next see the screen in step
7 which asks about an antenna connection.
This screen asks you about an antenna
connection.
7
If the answer is “YES”, you
may see an additional
screen to select the input.
12
This screen gives helpful information about
TV Guide On Screen.
Congratulations, you are
done!
Then you next see the
screen in step 8 about
confirming your basic
settings.
If the answer is “NO”, you next see the screen in step
8 about confirming your basic settings.
Important: If you selected that you do not
have cable service connected to this TV in
the previous screens, you must select “YES”
in this screen to receive a channel lineup and
listings.
In the United States, TV GUIDE and other related marks
are registered marks of Gemstar-TV Guide
International, Inc. and/or one of its affiliates. In Canada,
TV GUIDE is a registered mark of Transcontinental Inc.,
and is used under license by Gemstar-TV Guide
International, Inc.
8
This screen asks you if the settings are
correct, so far.
If the answer is “YES”, you
next see an information
screen and then the screen
in step 9 which asks about
a VCR.
If the answer is “NO”, you
are returned to step 5, from
where you can change any incorrect information by
repeating the Setup process.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT INFORMATION ………………………1
DEAR SHARP CUSTOMER …………………………3
IMPORTANT SAFETY INSTRUCTIONS ……………3
QUICK REFERENCE …………………………………6
Attaching speakers ………………………………7
Contents …………………………………………… 11
Trademarks ………………………………………… 12
COPYRIGHT AND LICENSE NOTICE ………… 12
PATENT NOTICE …………………………………… 12
Supplied accessories …………………………… 13
Part names ………………………………………… 14
TV (Front) ……………………………………… 14
TV (Rear) ……………………………………… 15
Remote control unit …………………………… 16
Preparation ………………………………………… 17
Using the remote control unit ………………… 17
Cautions regarding remote control unit … 17
Antennas ……………………………………… 17
Watching TV ……………………………………… 18
Turning on the power ………………………… 18
Turning off the power ………………………… 18
Initial setup ……………………………………… 19
Using the TV Guide On Screen™
Using external equipment ……………………… 47
Displaying an external equipment image …… 47
Connecting a DVD player …………………… 48
Connecting a VCR …………………………… 49
Connecting a game console
or camcorder ……………………………… 49
Connecting a Digital TV STB (Air or Cable) … 50
Connecting HDMI equipment ………………… 51
Displaying an image from HDMI
equipment ………………………………… 51
Connecting a PC ……………………………… 52
Using Digital Audio Output …………………… 52
Connecting D-VHS decks/AV-HDD recorder/
Blu-ray Disc recorder (i.LINK connection) … 53
About i.LINK ……………………………… 53
i.LINK connection ………………………… 53
Connecting two or more i.LINK devices … 53
Setting the Recording Mode (i.LINK) …… 54
Setting the Standby Mode (i.LINK) ……… 54
Selecting an i.LINK device ……………… 55
Disabling the TV’s operation of
an i.LINK device ……………………… 55
Deleting registered i.LINK devices ……… 55
Controlling an i.LINK device……………… 56
Automatic input switching to i.LINK …… 57
Recording digital programs
with a D-VHS deck (i.LINK)…………… 57
Recording digital programs with AV-HDD
(Interactive Program Guide) ……………… 20
TV Guide On Screen Initial setup …………… 21
Using TV Guide On Screen …………………… 24
Program recording using
LISTINGS function ………………………… 27
Using Reminder function ……………………… 27
Using SCHEDULE function …………………… 28
Changing system settings …………………… 30
Changing channel display …………………… 31
Changing default options …………………… 31
Changing channels-Air/Cable ……………… 33
Changing volume/sound ……………………… 34
Setting MTS/SAP stereo mode ……………… 35
Setting Digital broadcasting audio mode …… 35
Connecting Digital Cable Module …………… 36
Basic adjustment settings ……………………… 37
AV input mode menu items …………………… 37
PC input mode menu items …………………… 37
EZ setup ………………………………………… 38
Channel Setup ………………………………… 38
Antenna Setup – DIGITAL – Air ……………… 39
Standby Mode ………………………………… 40
Favorite channel setting ……………………… 40
Language setting ……………………………… 40
Picture adjustments …………………………… 41
OPC setting ………………………………… 42
Advanced picture adjustments ………… 42
C.M.S. (Color Management System) …… 42
Color temperature ………………………… 42
Sharpness Enhancement ………………… 43
Automatic Contrast ……………………… 43
3D-Y/C ……………………………………… 43
Monochrome ……………………………… 43
Film Mode (3:2 pull-down) ……………… 43
I/P Setting ………………………………… 43
Sound adjustment ……………………………… 44
Dolby Virtual …………………………………… 44
Power Control ………………………………… 45
Power control for AV source ……………… 45
Power control for PC source……………… 45
Digital Setup …………………………………… 46
Video Setup ………………………………… 46
Audio Setup ……………………………… 46
recorder/Blu-ray Disc recorder ……… 58
Playing back using REC LIST (i.LINK) … 58
Useful adjustment settings ……………………… 59
Image position (AV input mode only) ……… 59
Moving the picture on the screen …………… 59
Auto Sync. adjustment (PC input mode only) … 60
Fine Sync. adjustment (PC input mode only) … 60
Input Select …………………………………… 61
Input Label ……………………………………… 62
Picture Flip ……………………………………… 62
AV MODE ……………………………………… 63
View mode for 4:3 Programs ………………… 63
View mode for HD Programs ………………… 63
View mode (for PC input mode) ……………… 64
Input signal (for PC input mode) …………… 65
3D Noise Reduction …………………………… 65
Mosquito Noise Reduction …………………… 65
Audio Only ……………………………………… 65
Output Select …………………………………… 66
Quick Shoot …………………………………… 66
Sleep Timer …………………………………… 66
Program Title Display ………………………… 66
Closed Captions and Digital Closed
Captions …………………………………… 67
Caption Setup ………………………………… 68
Secret number setting for parental control
(AV input mode only) ……………………… 69
Parental control (setting V-CHIP level) ……… 71
How to temporarily release
the V-CHIP BLOCK ……………………… 74
Reactivating the temporarily released
V-CHIP BLOCK …………………………… 74
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Other viewing options …………………………… 75
Viewing information of the program ………… 75
Picture and still image ………………………… 75
Presetting remote control function …………… 75
Appendix ………………………………………… 80
Removing the stand …………………………… 80
Setting the TV on the wall …………………… 80
Troubleshooting ………………………………… 81
Troubleshooting-TV Guide On Screen ……… 82
Troubleshooting-Digital broadcasting ……… 83
PC compatibility chart ………………………… 83
RS-232C port specifications ………………… 84
Specifications ………………………………… 86
Dimensional drawings …………………………… 87
Trademarks
• Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
• Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks
of BBE Sound, Inc.
• BBE Mach3Bass extends the bass response of a given loudspeaker and provides deep, tight and musically
accurate bass frequencies.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• CableCARD™ is a trademark of Cable Television Laboratories, Inc.
• In the United States, TV GUIDE and other related marks are registered marks of Gemstar-TV Guide International,
Inc. and/or one of its affiliates. In Canada, TV GUIDE is a registered mark of Transcontinental Inc., and is used
under license by Gemstar-TV Guide International, Inc.
COPYRIGHT AND LICENSE NOTICE
• It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that
prior permission be obtained from copyright owners whenever necessary.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited. U. S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 5,315,448; 6,381,747; and 6,516,132.
• This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming
by direct connection to a cable system providing such programming. A security card provided by your cable operator is
required to view encrypted digital programming. Certain advanced and interactive digital cable services such as video-
on-demand, a cable operator’s enhanced program guide and data-enhanced television services may require the use of
a set-top box. For more information call your local cable operator.
• The TV Guide On Screen system is manufactured under license from Gemstar-TV Guide International, Inc. and/or one of
its affiliates.
PATENT NOTICE
The TV Guide On Screen system is protected by one or more of the following issued United States patents
6,498,895, 6,418,556, 6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713; 4,751,578; 4,706,121.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit (g1)
“AAA” size battery (g2)
AC cord (g1)
Page 8
Page 8
Page 6
Cable clamp (g1)
Cable tie (g1)
G-LINK cable (g1)
Page 6
Page 6
Page 9
Operation manual (g1)
Speaker unit (g2)
Right speaker
Page 7
Left speaker
Page 7
NOTE
• Always use the AC cord supplied with the LCD-TV.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
TV (Front)
Channel
buttons**
(CHs/r)
INPUT button*
Volume buttons (VOLl/k )
POWER button
* INPUT button works as
ENTER in TV Guide On
Screen
** Channel buttons work as
a/b in TV Guide On
Screen
Remote
control sensor
Headphone jack
(When connecting
headphones, the sound
from the speakers is
muted.)
OPC sensor
SLEEP indicator
DL indicator
POWER indicator
OPC indicator
• See page 18 for the TV status indicator.
*OPC: Optical Picture Control
(See page 42.)
*DL: DownLoad
NOTE
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
TV (Rear)
MONITOR OUT/
REC. OUT terminals
G-LINK terminal
i.LINK terminals
INPUT 3
terminals
INPUT 2
terminals
CableCARD™ slot
INPUT 1
terminals
ANALOG IN
terminal
DIGITAL AIR
IN terminal
DIGITAL AUDIO
OUTPUT terminal
DIGITAL
CABLE IN
terminal
SYSTEM
RESET**
RESET*
INPUT 4 terminal
INPUT 5 terminals
AC INPUT terminal
RS-232C terminal
* Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Audio setting initializes
• Dolby Virtual resets to off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 70 for clearing the secret number when you
know it. See page 87 for initializing to the factory preset values when you forget your secret number.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
6
7
8
9
AIR: Receives air signal.
Remote control unit
1
CABLE: Receives cable signal.
VOL k/l: Sets the volume. (See page 34.)
Virtual:Selects Virtual Dolby Surround settings. (See
page 34.)
17
10 INFO: Displays the program information screen. (See page 75.)
11 RECORD: Records the program to equipment (capable of
recording). (See page 27.)
In TV Guide On Screen, initiates the recording process.
2
3
12 EXIT: Turns off the menu screen and TV Guide On
18
19
Screen.
13 FAVORITE CH
4
A, B, C, D: Selects four preset favorite channels in four
different categories. (See page 40 for details.)
While watching, you can toggle the selected channels
by pressing A, B, C and D.
DAY l/DAY k: In TV Guide On Screen, moves forward
or backward in 24 hour increments in the listing grid.
5
14 AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts. (See page 35.)
15 SLEEP: Sets the sleep timer. (See page 66.)
20
16 i.LINK: Displays the i.LINK panel. (See page 55.)
17 FUNCTION: Switches the remote control for TV, CBL/
SAT, VCR, DVD and AUDIO operation. Indicator lights
up for the current mode. (See pages 75 to 78 for details.)
* To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
6
7
8
21
22
23
9
10
24
25
18 LIGHT : When pressed all buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within about 5 seconds. This
button is used for performing operations in low-light
situations.
11
26
27
28
19 VIEW MODE: Selects the screen size. (See pages 63
and 64.)
12
13
20 ENT: Enters a channel selection when choosing with
the 0-9 buttons.
21 FLASHBACK: Returns to the previous channel or
29
30
31
32
external input mode. (See page 33.)
14
15
16
22 INPUT: Selects a Liquid Crystal Television input source.
(TV, CableBox, INPUT 1, INPUT 2, INPUT 3, INPUT 4,
INPUT 5, i.LINK) (See pages 47 and 61.)
If the CableBox is set up in the TV Guide On Screen
setting menu, the CableBox option appears.
23 CH r/s: Selects the channel. (See page 33.)
In the TV Guide On Screen, moves one page up or one
page down in the LISTINGS grid.
24 MUTE: Mutes the sound. (See page 34.)
25 TV GUIDE: Displays TV Guide On Screen.
26 MENU: Displays the menu screen.
27 a/b/c/d/ENTER: Selects a desired item on the
screen.
28 RETURN: Returns to the previous menu screen.
29 FREEZE: Sets the still image. Press again to return to
normal screen. (See page 75.)
1
TV POWER: Switches the Liquid Crystal Television
power on or enters Standby mode. (See page 18.)
30 CC: Displays captions when receiving closed-caption
signals. (See page 67.)
2
3
DISPLAY: Displays the channel information.
31 EDIT: Registers favorite channel. (See page 40.)
SOURCE POWER: Turns the power of the external
equipment on and off.
32 AV MODE: Selects an audio or video setting. (AV
mode: STANDARD, MOVIE, GAME, USER, DYNAMIC
(Fixed), DYNAMIC. PC mode: STANDARD, USER.)
(See page 63.)
4
5
External equipment operational buttons: Operates
the external equipment.
0 – 9/• (DOT): Sets the channel. (See page 33.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor on
the TV. Objects between the remote control unit and the remote control sensor
may prevent proper operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place
in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the TV set.
F-type connector
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (Commercially available).
75-ohm coaxial cable (round)
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
adapter (Commercially available).
300-ohm twin-lead cable (flat)
F-type connector
F-type connector should be finger-tightened only.
NOTICE
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set.
(The breaking of internal circuit, etc.)
75-ohm coaxial cable
Connecting Antenna Cable
Home Antenna
terminal (75-ohm)
Cable TV lead-In
Cable without a CATV
converter
Combination
VHF/UHF antenna
Coaxial cable
(commercially
available)
or
75-ohm coaxial cable (round)
300/75-ohm adapter
(commercially available)
300-ohm twin-lead (flat)
UHF
signal splitter
(commercially
available)
VHF
Separate VHF/UHF
antenna
ANTENNA ANTENNA
300-ohm
twin-lead
Combiner
(commercially
available)
300-ohm twin-lead
IN OUT
or
75-ohm coaxial cable
Depending on your reception
environment, either CABLE IN or AIR
IN may be used, or both CABLE IN
and AIR IN may be used.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WatchingTV
Simple operations for watching a TV program
Turning on the power
Press POWER on the TV or press TV POWER on the remote
control.
POWER
• POWER indicator (Blue): The TV is on. (After a few seconds, a window
appears with sound.)
NOTE
• The initial setup starts when the TV powers on for the first time. If the TV
has been turned on before, the EZ setup will not be invoked. See page
38 for performing EZ setup from the Setup menu.
Turning off the power
DL indicator
POWER
indicator
Press POWER on the TV or press TV POWER on the remote
OPC indicator
control.
• The TV enters standby mode and the image on the screen disappears.
• The POWER indicator on the TV gradually turns off.
TV POWER
NOTE
• If you are not going to use this TV for a long period of time, be sure to
remove the AC cord from the power outlet.
CAUTION
• Please do not unplug the AC cord when the DL indicator is
red.
TV status indicator (POWER)
ON
Lighting (Blue)
Lights off
OFF/Standby
TV status indicator (OPC)
“Off” is selected in OPC setting
Lights off
“On” or “On: Display” is selected in OPC setting
Lighting (Green)
TV status indicator (DL)
CableCARD security module is downloading data
TV Guide On Screen system is downloading data
Lighting (Red)
Lighting (Red)
Timer recording (in TV Guide On Screen system) is in Lighting (Red)
progress
TV Guide On Screen system is preparing to start timer Lighting (Red)
recording or display reminder screen
*OPC: Optical Picture Control
*DL: DownLoad
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Initial setup
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 8.)
2. Connect the antenna cable to the TV. (See page 17.)
3. Plug in the AC cord to the AC outlet. (See page 6.)
1
Language setting
Select from among 3 languages: English,
French and Spanish.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
5
Channel search
Channel auto search makes the TV look for
all channels viewable in the set area.
Press c/d to select “Yes” for ANALOG, then press b
to move down.
Press c/d to select “Yes” for DIGITAL (Air), then press
Standby Mode setting
2
b to move down.
Select the standby setting. (See page 40.)
Press c/d to select “Yes” for DIGITAL (Cable), and
press b to move down.
Select “Search Start”, and then press ENTER.
• This operation makes the TV search for both ANALOG,
DIGITAL (Air) and DIGITAL (Cable) channels.
Language
Standby Mode
TV Guide On Screen
Air/Cable
Mode 1
Mode 2
Language
Standby Mode
ANALOG
Yes
Yes
Yes
No
No
No
TV Guide On Screen
Air/Cable
CH Search
DIGITAL (Air)
DIGITAL (Cable)
Search Start
CH Search
Mode 1: Starting TV is quick from standby.
Example
Mode 2: Power consumption is small at the standby.
CH Search
NOTE
• When the CableCARD security module is inserted, power
consumption will be higher.
ANALOG
Air [ 25 ]
Found [ 20 ]
3
TV Guide On Screen setting
Press ENTER to continue the setting. (See page
21.)
CH Search
DIGITAL
Air [ 25 ]
Found [ 20 ]
Antenna setting
Make sure what kind of connection is made with
your TV.
4
CH Search
DIGITAL
Cable [ 25 ]
Found [ 25 ]
Press c/d to select “Air”, “Cable” for ANALOG, then
press b to move down.
Press c/d to select “Standard”, “HRC” or “IRC” for
DIGITAL (Cable).
Air
ANALOG
Press ENTER to enter the setting.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one that matches to your TV.
2
Audio
:
MONO
NOTE
NOTE
• Some items are not selectable because the antenna
setting is linked to the TV Guide On Screen setting.
• DIGITAL (Cable) setting cannot be selected when a proper
CableCARD security module is inserted.
• Make sure what kind of connection is made with your TV.
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ setup again. (See page
38.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Using the TV Guide On Screen™ (Interactive Program Guide)
The TV Guide On Screen system is a free, on-screen
interactive television program guide (“IPG”) built into
Reminder Feature
●
1. Viewers may set reminders to ensure they never
your LCD-TV. The TV Guide On Screen system was
developed to help today’s TV viewers, overwhelmed
by myriad viewing choices, find what they want to
watch quickly and easily, directly from their TV screen.
The TV Guide On Screen system displays all the major
TV channels and programs available in the viewer’s
household.
miss their favorite programs.
2. Reminders can even be set to automatically turn on
the TV when a program begins.
Important!
The TV Guide On Screen system automatically comes
up when you turn on the LCD-TV. You can turn off this
feature by changing default options. (See page 31 for
details.)
NOTE
• Over-the-air or cable access to stations carrying TV Guide
On Screen data is required for the TV Guide On Screen
system to operate. The data provider may elect to
discontinue the service or it may cease to be available in
your area. In either of these cases, the TV Guide On Screen
feature will not function.
Screen Components
●
Video Window
Service Bar
Also, since the program information provided by TV Guide
On Screen system is based on your location, you will need
to run SETUP again if you move to a different ZIP or postal
code.
About the Key features of TV Guide On Screen
LISTINGS Service
●
1. Displays eight days of viewers’ local program listings
and descriptions for broadcast and cable.
2. Viewers can tune to any program, schedule a
program to record, or set a reminder.
3. The Video Window lets viewers monitor the last
channel tuned while viewing program listings, or
preview channels as they page through listings.
4. Color-coded program genres help viewers quickly
identify movies, sports, and children’s programming.
Panel Channel
Tile
Info Box
Ad
Logo
Video Window - displays the last TV program or the
preview of the next TV program
Service Bar - provides access to the 4 main Guide
Services (LISTINGS/SEARCH/SETUP/SCHEDULE)
SEARCH Feature
●
1. Viewers can search for programs by categories such
as HDTV, movies, sports or children’s shows. Within
categories, viewers can sort by show type, such as
baseball or football.
Tile - displays program title
Info Box - provides information for a highlighted item
Channel Logo - identifies network
2. Viewers can sort alphabetically, or by a keyword
such as a show title or a starring actor.
Panel Ad - displays promotional information
The screening times of the
selected programs
Names and categories of
the selected programs
One-touch Recording
●
1. To record, viewers simply highlight a program title
and then press a button on the remote control. TV
Guide On Screen will automatically record the
program.
2. Programs may be set to record one time or every
time they air.
NOTE
• A VCR or a supported i.LINK recording device is required
for one-touch recordings. If you connect a VCR, it is
recommended that you connect it according to the
instructions on pages 9 and 49.
Information on the
selected programs
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Info Box
●
IMPORTANT:When using TV Guide On
Screen or if program information does not
download, please follow the instructions
below.
Info Box contains information about a show, service,
ad, or provides general help. A Show Listing Info Box
can have up to three sizes: Small, Large, and “No”.
The default size of the Info Box is Small. Press INFO
to cycle among the sizes.
The TV must be off to download information.
Leave your TV off overnight to receive the initial
download in your area.
(Refer to Troubleshooting-TV Guide On Screen on
page 82 for details.)
Info Button
●
The Info button appears on the button bar, if the Info
box size can change and/or if there are additional Info
screens.
• Press INFO on the remote control to cycle between Info
box sizes, as available.
TV Guide On Screen Initial setup
• In some instances, the Info key is used to page forward, if
there are additional pages of information, such as a Panel
Ad, Channel Ad, or help text.
The Guide uses Setup information to provide you with
show listings and lineups in your area - which are
updated several times a day. Once you setup the LCD-
TV according to this operation manual, you are ready
to set up TV Guide On Screen.
Icons
●
The following icons indicate the current program
information and the current and future actions & status.
1
Press TV GUIDE to start setup.
Name
Icon
Description
INFO
button
• Display the additional information.
• Elapsed time in current program.
This appears in LISTINGS,
SEARCH and when INFO is
pressed while watching TV.
Progress
bar
• The program is presented in High-
Definition TV, if available.
HDTV
New
• The program is new (not a repeat
program).
Press ENTER. Basic initial setup will start.
2
Stereo
• The program is available in Stereo.
• Closed Caption is available for the
program.
CC
Reminder screen
If you previously skipped Guide setup you will see the
Reminder Screen when you power on your LCD-TV.
TV Rating
• TV rating for the program.
• The program is set to record once.
• Other frequencies are Daily
(manual recording only), Regularly,
and Weekly.
Record
once
1
Press a/b to select an option.
• “Set up TV Guide On Screen now”: Basic initial
setup will start.
• The program is set to Record but
is currently off. (The program
remains in schedule.)
Record
off
• “Remind me to set it up later”: Returns to
watching TV.
• “Don’t remind me again”: Returns to watching
TV and stops the reminder screen from
appearing upon powering on.
• The program is suspended due to
a schedule conflict. (The program
remains in Schedule.)
• Recording resumes when the
conflict no longer exists.
Record
suspend
• The program is set to remind once.
Other frequencies are Daily
(manual reminder only), Regularly,
and Weekly.
Remind
once
• The program is set to remind but is
currently off. (The program remains
in Schedule.)
Remind
off
• The program is suspended due to
a schedule conflict. (The program
remains in Schedule.)
• Remind resumes when the conflict
no longer exists.
Remind
suspend
NOTE
• If you decide not to set up the Guide now, this reminder
screen will appear each time you power on the LCD-TV
(except if you selected “Don’t remind me again”).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Basic initial setup
Follow the on-screen prompts to configure the basic
settings.
8
TheTV Guide On Screen is now ready for
testing. Do the following:
1 Tune your cable box to channel 02.
2 Make sure to leave your cable box turned
on, and then press ENTER.
1
Select your location.
1 Press a/b to select the country.
2 Enter the ZIP code (or postal code) for
your location using the number buttons
or a/b.
2
Indicate the cable service connection.
Press a/b to select “Yes” or “No”, and then
press ENTER.
• If your answer is “No”, skip to step 10.
3
Indicate the cable box connection.
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Press a/b to select “Yes” or “No”, and then
press ENTER.
• If your answer is “No”, skip to step 11.
Do not press any buttons while testing is in
progress.
NOTE
• To receive TV program listings in the TV Guide On Screen
system, please ensure to connect your cable box to the
input marked “VIDEO”, if you are connecting your cable
box to your TV using INPUT 1 or INPUT 2. Do not connect
the cable box to the “COMPONENT” video of INPUT 1 or
INPUT 2, as you will not receive any TV program listings
through this input.
9
Confirm that your cable box is now tuned
to channel 09.
Press a/b to select “Yes”, “No” or “Test this
code again”, and then press ENTER.
• If you select “Yes”, go to the next step.
• If you select “No”, a different code is tested in
the previous screen.
4
Indicate which input the cable box is
plugged into.
• If you select “Test this code again”, the same
code is tested again in the previous screen.
Press a/b to select the input you
connected, and then press ENTER.
• To receive TV program listings in the TV Guide
On Screen system, if you select “Input 1” or
“Input 2”, please ensure your cable box is
connected to the input marked “VIDEO”, and
proceed to step 6. Do not connect your cable
box to the “COMPONENT” video of INPUT 1
or INPUT 2, as you will not receive any TV
program listings. If you select “Analog” input,
proceed to step 5.
10
11
Indicate the antenna connection.
Press a/b to select “Yes” or “No”, and then
press ENTER.
• If you select “Yes”, go to the next step.
• If you selected “No” in step 2, you must
connect an antenna to your TV and select “Yes”
to receive a channel lineup and listings.
Confirm the settings.
Confirm the settings displayed on the screen
and press a/b to select “Yes, end setup”
or “No, repeat setup process”, and then
press ENTER.
5
Indicate the channel your TV is tuned to
when using the cable box.
Press a/b to select from “Ch 2”, “Ch 3” and
“Ch 4”, and then press ENTER.
• Please consult your cable provider if you are
unsure.
6
The diagram on the screen shows the correct
way to connect the G-LINK cable from the
back of the TV to the cable box.
Make sure the G-LINK cable is properly
connected, and then press ENTER.
7
Indicate the cable box brand name.
Press a/b to select the cable box brand,
and then press ENTER.
Press ENTER to continue.
• Press a/b to view more cable box brands.
NOTE
• Please do not use the CableCARD security module while
using cable box.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
VCR setting
NOTE
Connect a VCR to your TV and use the TV Guide On
Screen system’s program listings to easily schedule
recordings using the one-touch recording feature.
•
Up-to-date listings will begin loading over the next 24 hours
when your LCD-TV is powered off. (Do not unplug the AC
cord.)
• It may take more than one day for all eight days of listings
to update. The guide will automatically receive updates
during the period when your LCD-TV is turned off.
• To receive your channel lineup and program listings, leave
your cable box on. Your VCR and LCD-TV should be turned
off overnight. (Do not unplug the AC cord.)
• To record a TV program, make sure your cable box is on.
Put a tape in your VCR, tune the device to the Line input,
then turn the VCR off. (Do not unplug the AC cord.)
• You must redo the TV Guide On Screen system setup if
you:
1
Set TV Guide On Screen to control your
VCR.
Press a/b to select “Yes, setup VCR
control”, and then press ENTER.
• If you select “Yes”, go to the next step.
• If you select “No”, setup will end.
2
This screen shows the correct way to connect
-Move your LCD-TV to a new ZIP or postal code.
-Cancel cable service or change cable boxes.
-Change your VCR brand or model.
the G-LINK cable from the back of the TV to
the recording device. Make sure the G-LINK
cable is properly connected, and then press
ENTER.
7
Press ENTER twice to watch TV.
3
Indicate the VCR brand name.
Press a/b to select the VCR brand, and
then press ENTER.
4
The TV Guide On Screen is now ready for
testing. Do the following:
1 Turn on your VCR and insert a tape.
2 Play the media on the VCR, and then
press ENTER.
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Do not press any buttons while testing is in
progress.
5
6
Confirm that your VCR has stopped
playing.
Press a/b to select “Yes”, “No” or “Test this
code again”, and then press ENTER.
• If you select “Yes”, go to the next step.
• If you select “No”, a different code is tested in
the previous screen.
• If you select “Test this code again”, the same
code is tested again in the previous screen.
Confirm the settings.
Confirm the settings displayed on the screen
and press a/b to select “Yes, end setup”
or “No, repeat setup process”, and then
press ENTER.
Press ENTER to complete the SETUP.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Clock
Video Window
Using TV Guide On Screen
Lock/Unlock Icon
Video Window
When you enter the Guide, the TV program for the
current show appears in the Video Window. The Video
Window also includes a clock display and a lock/
unlock icon to indicate the status of the Video Window.
You can set the Video Window to remain on a single
channel (locked) or change channels (unlocked) as
you navigate through Listings.
Basic buttons on the remote control
How to set the Video Window
Button
Description
• When watching TV, enters the Guide and
highlights a program listing.
• When in the Guide, exit the Guide without
changing channels.
TV GUIDE
1
Press c/d to highlight the desired Channel
Logo.
• The Info Box contains information about
a program, service, ad, or provides
general help. The size of the Info Box can
be set to “Small” or “Large”, or not to be
displayed by selecting “No”. The default
size of the Info Box is “Small”. Press INFO
to cycle among “Small”, “Large” and “No”.
INFO
2
3
Press MENU to display the Listings Options.
• Provides directional control.
• When watching TV, press a/b to scroll
through the channel list.
a/b/c/d
Press a/b to select “video” and then press
c/d to select “locked” or “unlocked”.
• Makes a selection or executes an action.
• With a currently airing program listing
highlighted, returns to normal TV viewing
and tunes to the program channel.
• With a future airing program listing
highlighted, displays a Panel menu with
viewing options.
ENTER
• Shows the program listing for a different
day.
• Selects the time on the changed listing.
DAY l/k
c/d
NOTE
• The TV Guide On Screen menus shown in this manual are
for illustration purposes only. The channels, programs, and
TV Guide On Screen information illustrated in this manual
may not be available in your area. The options and features
illustrated in this manual are subject to change when
updates are downloaded from the TV Guide On Screen
service to your TV.
• Display the Options for the Guide.
MENU
• Moves one page up or one page down in
the LISTINGS grid.
PAGE r/s
(CH r/s)
How to go to Service Bar
●
• The TV Guide On Screen system does not display program
listings for satellite TV systems.
The service provided by TV Guide On Screen is
composed of four services: SETUP, LISTINGS,
SEARCH and SCHEDULE. To make detailed settings
for each service, it is necessary to select the service
bar and change the selected service.
Choosing a program to watch - Using the LISTINGS
1
Press TV GUIDE.
1
Press MENU to display “Service Options”.
2
Press a/b/c/d to select the program to
watch, and then press ENTER.
Press a/b to select “go to Service Bar”.
2
NOTE
• The current position of the cursor is highlighted in yellow.
• To cancel the Guide screen, press TV GUIDE.
3
Press ENTER.
Changes the day from within LISTINGS
• Press DAYl or DAYk to select the day you want to
check the TV program table.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Searching programs
NOTE
You can search for programs alphabetically, by
category - HDTV, MOVIES, SPORTS, CHILDREN,
EDUCATIONAL, NEWS, VARIETY, SERIES - or by
keyword, and the result is displayed in a list.
• Repeat the same steps for the other categories.
• When you want to record a program found during a search,
press MENU and after “Episode options” displays, carry
out “Set recording”. (See page 27.)
Search by keyword
●
Keyword Search lets you enter a word to look for, a
particular program by category or for every program
title that matches.
1
Repeat steps 1 to 2 in Search by category.
2
3
Press c/d to select “KEYWORD”, and then
press ENTER to display the “Keyword
Search” menu.
Search by category
●
You can search for programs by specifying category
in the “Confirmation” screen.
1
When the LISTINGS screen is displayed,
press MENU.
Press a/b to select “go to Service Bar” from
the “Episode Options” menu, and press
ENTER.
Press a/b to select “new search”, and then
press ENTER to display the “Search
Options” menu.
2
3
Press c/d to select “SEARCH” and then
press ENTER or b.
Example: Searching for a program in the
category “MOVIES”.
Press c/d buttons to select “MOVIES”
(=Search type) and press b to display the
movies genre.
4
5
Press a to select “category” to search, and
then press c/d to select the desired category.
Press b to select “enter keyword”, and then
press ENTER. Press a/b/c/d to select a
character, and press ENTER to display it.
When complete, press a/b/c/d to select
“DONE” and press ENTER.
4
Press a/b/c/d to select a genre within
“MOVIES”. (e.g.: select “ALL” and press
ENTER)
NOTE
• BKSP: Backspace
• DEL: Delete
• CLR: Clear
6
A list of all matching programs is displayed.
Press b to highlight the program you want
to watch, and press ENTER.
5
Press a/b to select a program you want to
watch, and then press ENTER.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Edit keyword
ALPHABETICAL search
●
This Guide stores all the keywords you created.
1
Repeat steps 1 to 2 in Edit Keyword.
1
When the LISTINGS screen is displayed,
press MENU.
Press a/b to select “go to Service Bar” from
the “Episode Options” menu, and press
ENTER.
2
Press c/d to select “ALPHABETICAL”.
3
Press a/b/c/d to select the initial letter of
2
3
4
5
Press c/d to select “SEARCH” and then
the program.
press ENTER or b.
Press c/d to select “KEYWORD”.
• The keyword list is displayed.
Press a/b to select the keyword you want
to edit.
Press MENU to display the “Search Options”
menu.
4
5
6
Press ENTER and then the search result
displays.
Press MENU to display “Episode Options”.
Press a/b to select “tune to channel”.
You can watch the program on the LCD-TV.
Press b to select “edit search”, and press
ENTER.
6
NOTE
• On the “Episode Options”, if you want to set timer
recording, select “set recording”. (See page 27.)
• If you want to set the reminder function for this program,
select “edit reminder”. (See page 29.)
Delete keyword
Keywords may be deleted from the keyword list.
1
2
Repeat steps 1 to 2 in Edit Keyword.
Press c/d to select “KEYWORD”.
3
4
Press a/b to select the keyword you want
to delete.
Press MENU to display “Search Options”
menu.
5
6
Press b to select “delete search”, and press
ENTER.
Press a/b to select “Yes” to delete the
keyword, or “No” to close the “Search
Options” menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Using RECORD button on the remote control
Program recording using LISTINGS
function
1
Press a/b/c/d to select the program you
want to record on the LISTINGS.
You can set any programs to record on a G-LINK
connected recording device (VCR) directly from the
LISTINGS for the appropriate day.
2
By pressing RECORD, the program you want
to record is set to record on time. “on time”
is the default setting and can be changed.
Set recording
●
1
Press a/b/c/d to select the program you
want to record in the LISTINGS.
NOTE
• Each time you press RECORD, you can change the record
frequency.
2
Press MENU to display “Episode Options”.
Press a/b to select “set recording”, and
then press ENTER to display “Record
Options”.
Using Reminder function
You can set this function to remind you of the screening
times for programs from LISTINGS and of programs
you have set to record.
Using Episode Options
1
Press MENU to display “Episode Options”.
Press a/b to select “set reminder”, and then
press ENTER to display “Remind Options”.
3
Press a/b/c/d to set the following items.
Press a/b/c/d to set the following items.
2
Setup
items
Selectable items
Description
Setup
items
Selectable items
Description
frequency
once/regularly/weekly/ Set the recording
off cycle
on time/120 min early Set the start timing of
... 120 min late recording
on time/120 min early Set the end timing of
Set the reminder cycle
frequency
once/regularly/weekly/
off
start
When this is set to
“yes”, the TV will
automatically switch
on at the time the
reminder was set for.
power on TV yes/no
end
... 120 min late
recording
recorder
VCR/i.LINK
Set the external
recording device
When this is set to
“yes”, the channel will
be automatically
changed before the
reminder screen is
displayed.
auto tune TV yes/no
4
Press ENTER to highlight “schedule
recording”.
Set the timing to
perform above two
functions
when
on time/30 sec - 15
min early ... 30 sec -
15 min late
5
Press ENTER again to exit.
NOTE
3
4
Press ENTER to highlight “schedule
reminder”.
• Device must be selected beforehand when using i.LINK
as a recording device.
Press ENTER again to exit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Using SCHEDULE function
The SCHEDULE is a list of programs created whenever you set a recording, or a reminder to watch a program.
You can use this list to edit or delete the reminders and recordings you have set.
Sort programs
You can sort Record and Remind programs in
SCHEDULE list.
1
Press MENU to display “Episode Options”.
Press a/b to select “go to Service Bar”, and
then press ENTER.
1
Press MENU to display “Schedule Options”.
2
Press c/d to select “SCHEDULE”.
2
Press c/d to select how to sort the
SCHEDULE.
The program listings in SCHEDULE display a range of
icons and show information about the settings for each
program.
Description
Selected item
date
Both Record and Remind programs are
intermixed and sorted by scheduled date,
with the next scheduled program at the
top.
Function
Icon
Description
Once
Daily
Records the program one time.
Both Record and Remind programs are
intermixed and sorted by program title into
alphabetical order.
title
Indicates the program is set to
record daily (manual record setting
only).
event
Sorts first Record programs and then
Remind programs, by date.
Records the program every time the
program airs on the same channel
and starts at the same time.
Regularly
Weekly
Off
Record
(Using
“Record
Options”)
3
Press a/b to select “done”.
Records the program each time the
program airs on the same day of
the week, on the same channel and
starts at the same time.
Keeps the program in the list but
will not record this program until the
frequency is changed.
• The program is suspended due
to a schedule conflict. (The
program remains in Schedule.)
• Recording resumes when the
conflict no longer exists.
Suspend
Once
Daily
Set a program reminder one time.
Indicates the program is set to
remind daily (manual remind setting
only).
Set a program reminder every time
the program airs on the same
channel and starts at the same time.
Regularly
Weekly
Remind
(Using
“Remind
Options”)
Set a program reminder each time
the program airs on the same day
of the week, on the same channel
and starts at the same time.
Keeps the program in the list but
will not remind this program until the
frequency is changed.
Off
• The program is suspended due
to a schedule conflict. (The
program remains in Schedule.)
• Remind resumes when the
conflict no longer exists.
Suspend
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Delete recording
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
1
Repeat steps 1 and 2 in Using SCHEDULE
function.
1
Press a/b to select the program you want
2
3
4
Press a/b to select the program you want
to record.
to delete.
2
Press MENU to display “Record Options”.
Press MENU to display “Schedule Options”.
3
Press a/b to select “new manual recording”
and then press ENTER.
Press a/b to select “delete recording”, and
then press ENTER.
• Confirmation screen displays.
5
Press a/b to select “yes” or “no”.
Edit recording
1
Repeat steps 1 to 2 in Using SCHEDULE
function.
• “Record Options” screen displays.
Setup
items
2
3
4
Press a/b to select the program you want
Selectable items
Description
to edit.
date
Set a date to record
—
—
—
—
Press MENU to display “Schedule Options”.
start
Set a start time to
record
end
Set an end time to
record
Press a/b to select “edit recording”, and then
press ENTER to display “Record Options”.
• You can change the setting items again.
channel
input
Set a channel to
record using 0–9
analog/digital air/
digital cable/input 1/
input 2/input 3
Set the external
recording device or
antenna source
5
6
Press ENTER to highlight “schedule
recording”.
recorder
VCR/i.LINK
Select a recorder you
connected
frequency
once/weekly/daily/off
Set the recording
cycle
Press ENTER again to exit.
Edit reminder
4
Press ENTER to highlight “schedule
recording”.
1
Repeat steps 1 to 2 in Using SCHEDULE
function.
5
Press ENTER again to exit.
2
3
4
Press a/b to select the program for which
you want to set the reminder.
NOTE
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
Press MENU to display “Schedule Options”.
Press a/b to select “edit reminder”, and then
press ENTER to display “Remind Options”.
• You can change the setting items again.
5
6
Press ENTER to highlight “schedule
reminder”.
Press ENTER again to exit.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
New manual reminder
Instead of setting a reminder from the program
LISTINGS, you can set a reminder manually for a
program that you want to watch or a recording you
have set.
Changing system settings
After you initially complete Guide Setup, you can make
changes to System settings in the “SETUP” screen.
1
Press TV GUIDE and then press MENU.
1
Press a/b to select the program you want
to set reminder.
2
3
Press a/b to select “go to Service Bar” in
“Episode Options”, and then press ENTER.
2
Press MENU to display “Remind Options”.
Press c/d to select “SETUP” .
3
Press a/b to select “new manual reminder”
and then press ENTER.
• “Remind Options” screen displays.
4
Press b to select “Change system settings”.
Setup
items
Selectable items
Description
date
Set a date to remind
—
—
—
—
start
Set a start time to
remind
end
Set an end time to
remind
channel
input
Set a channel to
remind using 0–9
analog/digital air/
digital cable/input 1/
input 2/input 3
Set the external
device or antenna
source
power on TV yes/no
When this is set to
“yes”, the TV will
automatically switch
on at the time the
reminder was set for.
5
Press ENTER to display the “Confirming
Your Settings” screen.
auto tune TV yes/no
When this is set to
“yes”, the channel will
be automatically
changed before the
reminder screen is
displayed.
frequency
once/weekly/daily/off
Set the reminder cycle
4
Press ENTER to highlight “schedule
reminder”.
• If you want to change System settings, select
“No, repeat setup process” and then press
ENTER.
• If the setting details displayed on the screen is
correct, select “Yes, everything is correct”, and
then press ENTER.
• If the channel lineup is incorrect, select “Yes,
but my channel lineup is incorrect”, and then
press ENTER.
5
Press ENTER again to exit.
NOTE
• The program set to be manually reminded is listed by
channel number in the SCHEDULE.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Changing channel display
7
Press a/b to select “done”, and then press
ENTER to exit.
This setting lets you edit channel information that
appears in LISTINGS.
Changing default options
You can set each function as follows:
This setting lets you change the default settings as
follows.
1. Re-order the position the channel appears in
LISTINGS
2. Change the channel number
3. Switch a channel
General default options
• On - the channel is always displayed
• Off - the channel is never displayed
• Auto-Hide - the channel is only displayed when
program information is available
Repeat steps 1 to 3 in Changing channel
display.
1
2
Press b to select “General default options”,
and press ENTER.
1
Press TV GUIDE and then press MENU.
2
Press a/b to select “go to Service Bar” in
“Episode Options”, and then press ENTER.
Press c/d to select “SETUP” .
3
4
Press a/b to select “Change channel
display”, and then press ENTER.
3
4
Press MENU to display “General Defaults”.
5
Press ENTER to display the “Grid Options”
screen.
Press a/b/c/d to set the following items.
Setup
items
Selectable items
Description
Info box size last used/no/small/
Set the initial info box
size when you enter
the TV Guide On
Screen
large
box cycle
all/no only/small only/ Set the info box
large only/no & small/ rotation when you
no & large/small &
large
press INFO
auto guide
on/off
When this is set to
“on”, automatic entry
into the TV Guide On
Screen when you turn
on the TV
6
Press a/b/c/d to set the following items.
Description
Selected item
channel
off/on/auto-hide
5
When you have finished, press a/b to
select “done”, and then press ENTER again
to exit.
Air/Cable/cable box
service
Set the channel number you want to display
Set the channel display position
tune channel
position
• Depending on the channel currently being received you
may be able to select “service”.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (TV Guide On Screen)
Record default options
Remind Default Options
1
2
Press TV GUIDE and then press MENU.
1
Press TV GUIDE and then press MENU.
Press a/b to select “go to Service Bar” in
“Episode Options”, and then press ENTER.
2
3
Press a/b to select “go to Service Bar” in
“Episode Options”, and then press ENTER.
3
Press b to select “Remind defaults”, and
then press ENTER.
Press b to select “Record defaults”, and
press ENTER.
4
5
4
5
Press ENTER to display “Record Defaults”.
Press ENTER to display “Remind Defaults”.
Press a/b/c/d to set the following items.
Press a/b/c/d to set the following items.
Setup
items
Selectable items
Description
Setup
items
Selectable items
Description
power on TV yes/no
When this is set to
“yes”, the TV will
automatically switch
on at the time the
reminder was set for.
start
on time/120 min early Set the start timing of
... 120 min late recording
on time/120 min early Set the end timing of
end
... 120 min late
recording
auto tune TV yes/no
When this is set to
“yes”, the channel will
be automatically
changed before the
reminder screen is
displayed.
recorder
VCR
Set the external
recording device
6
When you have finished, press a/b to
select “done”, and then press ENTER again
to exit.
when
on time/30 sec - 15
Set the timing to
perform above two
functions
min early ... 30 sec -
15 min late
6
When you have finished, press a/b to
select “done”, and then press ENTER again
to exit.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Method 4
1. Press INPUT.
Changing channels-Air/Cable
2. Press a/b to select CableBox [TV], and then press
You can change channels in several ways by pressing
AIR or CABLE to select the antenna and then following
one of the methods below .
ENTER.
INPUT SOURCE
TV
CableBox [TV]
INPUT1
INPUT2
INPUT3
INPUT4
Method 1
INPUT5
Using CHr/s on the remote control unit or on the TV.
i.LINK
Method 2
3. Press CHr/s to change the channel of the cable
1. Press FLASHBACK to switch to the previously tuned
channel.
box.
2. Press FLASHBACK again to switch back to the
currently tuned channel.
NOTE
• FLASHBACK will not work if no channel has been
changed after TV is turned on.
Method 3
Using remote control buttons 0–9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5s ENT
Air
Air
ANALOG
5
5
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0–9 only, channel selection will be made
if there is no operation for a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1s1s5
Cable
Cable
Cable
ANALOG
115
1
11
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 s2s• (DOT) s1s ENT
Air
Air
Air
Air
Air
DIGITAL
22.1
2
22
22.
22.1
NOTE
• When you enter 0–9 only, channel selection will be made
if there is no operation for a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will
be made if there is no operation for a few seconds.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
■ Using MUTE on the remote control unit
Changing volume/sound
Mutes the current sound output.
■ Changing the volume
You can change the volume on the TV or on the remote
control unit.
1
Press MUTE.
• “M” will be displayed on the screen for 30
minutes, and the sound is silenced.
20
■ Using VOL k/l
• To increase the volume, press VOL k.
• To decrease the volume, press VOL l.
Mute
Volume adjustment
NOTE
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
20
• Mute will cancel if you press VOL l/k or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
NOTE
• VOL l/kon the TV operates the same as VOL k/l on
the remote control unit.
Audio status
■ Using
Virtual on the remote control unit
Output Select
Output device
Fixed
Variable
Variable sound
Speaker
Mute
Constant as
specified
Variable sound
MONITOR OUT
Virtual produces Dolby Virtual effect from the
speakers. Each time you press
changes between On and Off.
Virtual, the mode
* When “Output Select” is set to “Variable”, the indicator on
the screen changes as shown below.
Dolby Virtual sound options
• On: Makes it possible to enjoy natural, realistic
surround sound.
• Off: Outputs the normal sound.
20
Dolby Virtual : Off
Dolby Virtual : On
NOTE
• See page 66 for details on the output select function.
NOTE
• You can have the same settings by choosing “Dolby
Virtual” on the menu items. (See page 44.)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Setting MTS/SAP stereo mode
Setting Digital broadcasting audio
mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The
TV with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition, it is possible for multiple audio tracks to
accompany a single video track.
Press AUDIO to toggle
between audio modes.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Examples: when receiving Digital broadcasting
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to second language, supplementary
commentary and other information. (SAP is mono sound.)
Air
Air
Air
DIGITAL
2.2
Audio1
:
STEREO
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
DIGITAL
2.2
STEREO
NOTE
Audio2
:
• MTS only operates while in TV mode.
You can change MTS as
shown below to match
the television broadcast
signal.
DIGITAL
2.2
SURROUND
Audio3
:
Examples: when receiving MTS and SAP
STEREO mode
MAINkSAP mode
Air
ANALOG
Air
ANALOG
2
2
MAIN
Audio
:
STEREO
Audio
:
Air
ANALOG
Air
ANALOG
2
2
SAP
Audio
:
MONO
Audio
:
STEREOkSAP mode
MONO mode
Air
Air
Air
ANALOG
Air
ANALOG
2
2
MONO
Audio
Audio
Audio
:
ST(SAP)
Audio
:
ANALOG
2
:
SAP(ST)
ANALOG
2
:
MONO
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
■ If the above procedure does not work,
Connecting Digital Cable Module
please follow the following steps instead.
Digital Cable Module is called CableCARD™. By
attaching the CableCARD security module, you can
receive various digital services provided by your Cable
Company. To obtain and use a CableCARD security
module you need to first submit an application.
Please contact your cable company to discuss
receiving an application.
1
Press MENU and the MENU screen displays.
Press c/d to select “Digital Setup”, a/b to
2
select “CableCARD Menu”, a/b to select
“Pairing Information”, and then press ENTER.
NOTE
• If your cable company does not have CableCARD security
module available, you must connect to the cable-TV set-
top box via component video or DVI in order to receive
HDTV programs. (See page 50.)
Conditional Access
Pairing Information
Diagnostic Screen
ECM
■ When you change your address (See page 79.)
■ About EAS (Emergency Alert System) (See page 79.)
•
The words “Pairing Information” may be replaced
by a different expression depending on the
manufacturer of the CableCARD security module.
1
Turn on the power of the TV.
A message will appear on the screen. Call
the number on the screen and tell the
operator the CableCARD security module ID
and Host ID numbers displayed on the
screen.
3
2
Connect the antenna cables to both ANALOG
IN and DIGITAL CABLE IN terminals.
NOTE
CableCARD Dialog
• Use a signal splitter (commercially available) for this type
of connection. (See page 17.)
CableCARD(tm) Pairing Status
In order to start cable service
for this device, please contact
your cable provider
3
1-888-555-2222
Insert the CableCARD security module (lower
CableCARD(tm) ID:
7-561-034-449-009
Host ID:
side facing right) into the CableCARD slot.
• When the CableCARD security module is
inserted, a message appears, asking you to
confirm the cable connections.
Press RETURN to cancel the message, or wait
until the screen in step 4 appears.
0-100-331-784-018
• If there is a white triangle at the right side of
the screen, the screen is not showing the entire
message. Press a/b on your remote control
to display the rest of the message.
• When there is a “LINK” button on the screen,
there is a link to the next page. Press ENTER
to go to the next page.
4
A message will appear on the screen. (It
might take a couple of minutes before the
message appears.) Call the number on the
screen and tell the operator the CableCARD
security module ID and Host ID numbers
displayed on the screen.
CableCARD(tm)
Diagnostic Information
Power: ON
In band: O.K.
Out of band: O.K.
Video: O.K.
CableCARD(tm) Pairing Status
Audio: O.K.
In order to start cable service
for this device, please contact
your cable provider
LINK
1-888-555-2222
CableCARD™ ID:
7-561-034-449-009
Host ID:
Removing CableCARD security module
0-100-331-784-018
1 Turn on the power of the TV.
2 Check that the CableCARD security module upgrade
screen is not displayed. If it is displayed, wait until it
disappears.
NOTE
3 Remove the CableCARD security module.
• Do not insert any PCMCIA card other than CableCARD
security module into the CableCARD slot.
Disconnecting the cable antenna
• Please do not pull the AC cord out while the CableCARD
security module is inserted.
• After inserting the CableCARD security module, it may
take several minutes before video output from the selected
channel appears on screen.
1 Turn on the power of the TV.
2 Check that the CableCARD security module upgrade
screen is not displayed. If it is displayed, wait until it
disappears.
3 Disconnect the cable antenna.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Digital Setup
AV input mode menu items
List of AV menu items to help you with
operations
CableCARD Menu ................................. Page 36
Video Setup ........................................... Page 46
Audio Setup........................................... Page 46
i.LINK Setup .................................. Pages 53-58
Picture
OPC ........................................................ Page 42
Backlight ................................................ Page 41
Contrast ................................................. Page 41
Brightness ............................................. Page 41
Color....................................................... Page 41
Tint ......................................................... Page 41
Sharpness ............................................. Page 41
Advanced
*PC input mode menu items
List of PC menu items to help you with
operations
*When INPUT5 is set to PC.
Picture
C.M.S. .......................................... Page 42
Color Temp. ................................ Page 42
Sharpness Enhancement ......... Page 43
Automatic Contrast ................... Page 43
3D-Y/C ......................................... Page 43
Monochrome .............................. Page 43
Film Mode ................................... Page 43
I/P Setting ................................... Page 43
OPC ........................................................ Page 42
Backlight ................................................ Page 41
Contrast ................................................. Page 41
Brightness ............................................. Page 41
Red ......................................................... Page 41
Green...................................................... Page 41
Blue ........................................................ Page 41
Advanced
Audio
C.M.S. .......................................... Page 42
Sharpness Enhancement ......... Page 43
Treble ..................................................... Page 44
Bass ....................................................... Page 44
Balance .................................................. Page 44
Dolby Virtual .......................................... Page 44
Audio
Treble ..................................................... Page 44
Bass ....................................................... Page 44
Balance .................................................. Page 44
Dolby Virtual .......................................... Page 44
Power Control
No Signal Off ......................................... Page 45
No Operation Off................................... Page 45
Power Control
Power Management .............................. Page 45
Setup
EZ Setup ................................................ Page 38
CH Setup........................................ Pages 38, 39
Antenna Setup-DIGITAL ....................... Page 39
Input Label............................................. Page 62
Parental CTRL ............................... Pages 69-74
Position .................................................. Page 59
Picture Flip ............................................ Page 62
Standby Mode ....................................... Page 40
Language ............................................... Page 40
Setup
Input Signal ........................................... Page 65
Auto Sync. ............................................. Page 60
Input Label............................................. Page 62
Fine Sync. .............................................. Page 60
Picture Flip ............................................ Page 62
Standby Mode ....................................... Page 40
Language ............................................... Page 40
Option
Option
Audio Only ............................................. Page 65
3D Noise Reduction.............................. Page 65
Mosquito Noise Reduction .................. Page 65
HDMI Setup............................................ Page 51
Input Select ........................................... Page 61
Output Select ........................................ Page 66
Quick Shoot........................................... Page 66
Caption Setup ....................................... Page 68
Program Title Display ........................... Page 66
Audio Only ............................................. Page 65
Input Select ........................................... Page 61
Output Select ........................................ Page 66
Quick Shoot........................................... Page 66
Digital Setup
i.LINK Setup .................................. Pages 53-58
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
EZ Setup
Channel Setup
You can run EZ Setup again, even after setting up the
preset channels.
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
1
Press MENU and the MENU screen displays.
1
2
3
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
Press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 69 for
setting a secret number.
3
Press a/b to select “EZ Setup”, and then
press ENTER.
• If you already set the Secret No., go to step 4. If
not, skip to step 5.
4
5
Press a/b to select “Air/Cable”, and then
Input the 4-digit secret number by using 0 – 9.
4
5
press ENTER.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press c/d to select “Air”, “Cable”, for
ANALOG, then press b to move down.
Press c/d to select, “Standard”, “HRC”,
“IRC” for DIGITAL (Cable).
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable” for ANALOG and
DIGITAL (Cable).
Press ENTER to enter the setting.
NOTE
• Make sure what kind of connection is made with your TV.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your TV.
Press c/d to select “Air”, “Cable”, for
6
ANALOG, then press b to move down.
Press c/d to select “Standard”, “HRC”,
“IRC” for DIGITAL (Cable).
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Press ENTER to enter the setting.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your TV.
1
Repeat steps 1 to 3 in Antenna setting in
Channel Setup.
• If cable or antenna connection was selected for
the ANALOG IN terminal at the time when you
set up TV Guide On Screen, the analog settings
cannot be changed afterward. If you need to
change the analog settings, you will have to
change the TV Guide On Screen settings first.
Press a/b to select “CH Search”, and then
press ENTER.
2
Press c/d to select “Yes” for ANALOG, then
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
3
press b to move down.
Press c/d to select “Yes” for DIGITAL (Air),
then press b to move down.
Press c/d to select “Yes” for DIGITAL
(Cable), and press b to move down.
Select “Search Start”, and then press
ENTER.
Press c/d to select “Yes” for ANALOG, then
7
press b to move down.
Press c/d to select “Yes” for DIGITAL (Air),
then press b to move down.
Press c/d to select “Yes” for DIGITAL
(Cable), and press b to move down.
Select “Search Start”, and then press
ENTER.
NOTE
• Make sure what kind of connection is made with your TV.
• This operation makes the TV search for both
ANALOG, DIGITAL (Air) and DIGITAL (Cable)
channels.
NOTE
• If no channel is found, make sure what kind of connection is
made with your TV and try EZ Setup again.
• Make sure what kind of connection is made with your TV.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Channel memory setting
Antenna Setup – DIGITAL – Air
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
1
Press MENU and the MENU screen displays.
2
3
Press c/d to select “Setup”.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press a/b to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 69 for
setting a secret number.
1
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
2
3
Press a/b to select “CH Memory”, and then
4
5
6
press ENTER.
Press a/b to select “Antenna Setup -
DIGITAL”, and then press ENTER.
Press a/b to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 69 for
setting a secret number.
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
Press a/b to select “Signal Strength”.
4
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
When viewing ANALOG broadcasts:
1 Press a/b, and then press c/d to select
the channel to skip or not.
Signal Strength
Channel Strength
2 Press a/b to select “Skip”, and then press
c/d to select “On” or “Off”.
Signal Strength
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip or
not, and then press c/d to select “On” or
“Off”.
Current
0
Max
0
• On: Skips channels. (Channel selection disabled using
CHr/s.)
Channel Strength
• The channel signal strength can also be checked
separately.
• Off: Does not skip channels. (Channel selection enabled
using CHr/s.)
1
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL - Air.
NOTE
• Make sure what kind of connection is made with your TV.
2
Press a/b to select “Channel Strength”, and
then press ENTER.
3
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
Signal Strength
Channel Strength
1 2 CH
Signal Strength
Current
0
Max
0
NOTE
• This function is available for DIGITAL (Air) only.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Deleting favorite channel
Standby Mode
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
1
Press EDIT and the favorite channel screen
displays.
2
3
Press a/b to select “1 Data Clear”, and then
1
2
3
4
Press MENU and the MENU screen displays.
press ENTER.
Press a/b/c/d to select the channel you
want to delete, and then press ENTER.
Press c/d to select “Setup”.
A
B
C
D
Press a/b to select “Standby Mode”, and
then press ENTER.
ANALOG
ANALOG
3
18
D-Air
10.1
ANALOG
125
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
ANALOG
ANALOG
33
51
Selected item
Mode1
Description
Press c/d to select “Yes”, and then press
ENTER.
4
Starting TV is quick from standby.
Yes
No
Power consumption is small at the
standby.
Mode2
A
ANALOG
B
C
D
3
D-Air
10.1
Favorite channel setting
ANALOG
125
ANALOG
33
ANALOG
51
This function allows you to program 4 favorite channels,
in 4 different categories. By setting the favorite
channels in advance, you can select your favorite
channels easily.
NOTE
• You can delete all the favorite channels by selecting “All
Data Clear” in step 2 in Deleting favorite channel.
1
Select the channel you want to register as a
favorite channel.
Language setting
Press EDIT.
2
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Press a/b to select “Register”, and then
press ENTER.
3
1
Press MENU and the MENU screen displays.
Press a/b/c/d to select the position in the
area, and then press ENTER to register.
4
2
3
Press c/d to select “Setup”.
A
ANALOG
B
C
D
Press a/b to select “Language”, and then
press ENTER.
3
Press a/b to select the desired language
listed on the screen, and then press ENTER.
4
English
Français
Español
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Picture adjustments
1
2
3
4
Press MENU and the MENU screen displays.
Adjusts the picture to your preference with the following
picture settings.
Press c/d to select “Picture”.
Press a/b to select a specific adjustment
item.
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, press ENTER, press c/d
to select “Yes”, and then press ENTER.
Adjustments for AV source
Adjustments for PC source
[
]
MENU Picture
[
]
MENU Picture
Picture
Audio
Picture
Audio
OPC
Off
[+16] –16
[+30]
On
On : Display
+16
OPC
Off
[+16] –16
[+30]
On
On : Display
+16
Backlight
Contrast
Brightness
Color
Backlight
Contrast
Brightness
Red
0
+40
+30
+30
+30
+10
0
+40
+30
+30
+30
+30
[
[
[
[
0] –30
0] –30
0] –30
0] –10
[
[
[
[
0] –30
0] –30
0] –30
0] –30
Tint
Green
Sharpness
Advanced
Reset
Blue
Advanced
Reset
Selected item
Backlight
Contrast
Brightness
Red
Selected item
Backlight
Contrast
Brightness
Color
cbutton
dbutton
cbutton
dbutton
The screen dims
For less contrast
For less brightness
For weaker red
The screen brightens
For more contrast
For more brightness
For stronger red
The screen dims
For less contrast
For less brightness
The screen brightens
For more contrast
For more brightness
For less color
intensity
For more color
intensity
Skin tones become
purplish
Skin tones become
greenish
Green
Tint
For weaker green
For weaker blue
For stronger green
For stronger blue
Blue
Sharpness
For less sharpness
For more sharpness
NOTE
NOTE
• Select “Advanced” and then press ENTER to set “C.M.S-
Hue”, “C.M.S-Saturation”, “C.M.S-Value”, “Color Temp.”,
“Sharpness Enhancement”, “Automatic Contrast”, “3D-Y/
C”, “Monochrome”, “Film Mode” or “I/P Setting”. See pages
42 to 43.
• Select “Advanced” and then press ENTER to set “C.M.S-
Hue”, “C.M.S-Saturation”, “C.M.S-Value” and “Sharpness
Enhancement”. See pages 42 to 43.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
OPC setting
Advanced picture adjustments
Automatically adjusts the brightness of the screen.
This TV provides various advanced functions for
optimizing the picture quality.
1
Press MENU and the MENU screen displays.
1
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
2
Press c/d to select “Picture”.
2
Press a/b to select “OPC”.
3
3
Press a/b to select “Advanced”, and then
press ENTER.
4
Press c/d to select “On” or “On: Display”.
4
5
Press a/b to select a specific adjustment
OPC
Off
On
On : Display
+16
item.
•
You can select “C.M.S-Hue”, “C.M.S-
Saturation”, “C.M.S-Value”, “Color Temp.”,
“Sharpness Enhancement”, “Automatic
Contrast”, “3D-Y/C”, “Monochrome”, “Film
Mode” or “I/P Setting”.
Backlight
Contrast
Brightness
Color
[+16] –16
[+30]
0
+40
+30
+30
+30
+10
[
[
[
[
0] –30
0] –30
0] –30
0] –10
Tint
Press a/b (or c/d) to select the desired
parameter.
Sharpness
Advanced
Reset
•
See the table for the selectable
parameters.
C.M.S. (Color Management System)
Selected item
Off
Description
Color tone is managed using the six-color adjustment
setting.
The brightness is fixed at the value set in
“Backlight” (see page 41).
Automatically adjusts
On
Description
Selected item
C.M.S-Hue
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On: Display
This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S-
Saturation
Increases or decreases the saturation of a
selected color.
NOTE
• When set to “On”, the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
A higher value makes the image brighter.
A lower value makes the image darker.
C.M.S-
Value
• When set to “On: Display”, OPC effect displays on the
NOTE
screen while OPC is adjusting the screen brightness.
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
Color temperature
For a better white balance, use color temperature
correction.
Description
Selected item
High
White with Bluish tone
Mid-High
Middle
Mid-Low
Low
White with Reddish tone
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Sharpness Enhancement
Provides sharper images with more depth by adjusting
background sharpness.
NOTE
• The higher the number of the level, the more sharpness
and depth you will get in images. However, this may also
add more background noise.
Automatic Contrast
Adjusts black level and white level in images
automatically as appropriate to a particular scene.
Description
Selected item
On
Off
Automatically adjusts
For normal images
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Description
Selected item
Normal adjustment
Standard
Fast
For movie image
For still image
Slow
NOTE
• 3D-Y/C is available for input signal from Composite Video
and ANALOG IN.
Monochrome
For viewing a video in monochrome.
Description
Selected item
Normal color
For viewing in monochrome
Off
On
Film Mode (3:2 pull-down)
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Description
Selected item
Normal viewing mode
Detects, analyzes, converts film source
Off
On
I/P Setting
Converts input signals from interlace to progressive.
NOTE
• “I/P Setting” is not selectable when channel display shows
an input resolution of 480P or 720P.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Sound adjustment
Dolby Virtual
You can adjust the sound quality to your preference
with the following settings.
You can enjoy the SURROUND 2ch stereo with Dolby
Pro Logic II technology.
VIRTUAL DOLBY DIGITAL is a technology certified by
Dolby Laboratories that creates a virtualized surround
sound experience from two speakers using Dolby Pro
Logic or Dolby Pro Logic II.
1
Press MENU and the MENU screen displays.
VIRTUAL DOLBY DIGITAL retains all the original
multichannel audio information and provides the
listener with the sensation of being surrounded by
additional speakers.
Press c/d to select “Audio”.
2
[
]
MENU Audio
Audio
Power Control
Treble
Bass
[ 0]
[ 0]
[ 0]
–15
–15
L
+15
+15
R
1
Press MENU and the MENU screen displays.
Balance
Press c/d to select “Audio”.
2
Dolby Virtual
Reset
[Off]
3
Press a/b to select “Dolby Virtual”, and
3
4
then press ENTER.
Press a/b to select a specific adjustment
item.
...
[
]
MENU Audio Dolby Virtual
Audio
Power Control
Press c/d to adjust the item to your desired
position.
Treble
Bass
[ 0]
[ 0]
[ 0]
–15
–15
L
+15
+15
R
Selected item
Treble
cbutton
For weaker treble
For weaker bass
dbutton
For stronger treble
For stronger bass
Balance
Dolby Virtual
Reset
[Off]
Bass
4
Press c/d to select “On”, and then press
ENTER.
Decrease audio from Decrease audio from
the right speaker the left speaker
Balance
NOTE
NOTE
• You can choose Dolby Virtual by pressing
the remote control unit.
• Audio menu is grayed out when Output Select is set to
“Variable”.
• “Balance”, “Treble” and “Bass” are grayed out when Dolby
Virtual is set to “On”.
• For some discs, setup may be required on your DVD. In
this case, please refer to the operation manual of your
DVD player.
Virtual on
• Audio menu is grayed out when Output Select is set to
“Variable”.
• “Balance”, “Treble” and “Bass” are grayed out when Dolby
Virtual is set to “On”.
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, press ENTER, press c/d
to select “Yes”, and then press ENTER.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Power control for PC source
Power Control
Power control setting allows you to save energy.
Power control setting allows you to save energy.
Power management
Power control for AV source
No signal off
When set, the power will automatically shut down.
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
1
Repeat steps 1 and 2 in No signal off.
1
Press MENU and the MENU screen displays.
Press a/b to select “Power Management”,
and then press ENTER.
2
Press c/d to select “Power Control”.
2
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
3
Press a/b to select “No Signal Off”, and
then press ENTER.
3
Off
Mode1
Mode2
Press c/d to select “Enable”, and then
press ENTER.
4
Selected item
Off
Description
Enable
Disable
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Five minutes before the power shuts down,
remaining time displays every minute.
• Even if you start using the PC and the signal
inputs again, the TV stays off.
• The TV turns on again by pressing TV
POWER on the remote control unit. (See
page 18).
Mode1
NOTE
• “Disable” is factory preset value.
• When a TV program finishes, this function may not operate.
• Pressing POWER on the TV will have the
same result.
No operation off
• If no signal inputs for 8 seconds, the TV
enters standby mode.
• When you start using the PC and the signal
inputs again, the TV turns on.
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Mode2
NOTE
1
Repeat steps 1 and 2 in No signal off.
• When using a digital PC and setting “Mode2” in Power
management, the power may not turn back on
automatically even if the signal inputs again.
Press a/b to select “No Operation Off”, and
then press ENTER.
2
• If you turn off the power by disconnecting AC cord when
setting “Mode2” in power management, the TV may not
function properly after turning the power on again. In such
case, press TV POWER on the remote control unit.
• Pressing POWER on the TV will have the same result.
Press c/d to select “Enable”, and then
3
press ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Digital Setup
4
5
Press a/b to select “REC Picture Size”, and
then press ENTER.
This setting allows you to set the image of Digital
broadcasting.
Screen Size
REC Picture Size
Video Setup
You can adjust the settings for Digital image.
4 : 3 TV
16 : 9 TV
Screen Size
Set the format of image of Digital broadcasting.
Press MENU and the MENU screen displays.
1
Press c/d to select the desired picture size,
and then press ENTER.
Press c/d to select “Digital Setup”.
2
Selected item
4:3 TV
Description
Bars may appear on the top and
bottom with some programs
Press a/b to select “Video Setup”, and then
press ENTER.
3
16:9 TV
Displays in full screen
4
Press a/b to select “Screen Size”, and then
press ENTER.
Audio Setup
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUTPUT terminal
on the TV (see page 52). Please select an audio output
format compatible with the audio format of the program
you are watching and the equipment connected.
Press c/d to select “Manual” or “Auto”.
5
Selected item
Manual
Description
With 480i/480p/720p broadcasts
you can change the screen size to
the size of your choice.
1
2
3
4
Press MENU and the MENU screen displays.
Auto
All broadcasts will be converted
and displayed in the 1080i format.
Press c/d to select “Digital Setup”.
NOTE
• “Manual” is factory preset value.
Press a/b to select “Audio Setup”, and then
press ENTER.
REC Picture Size
Select the screen size to record on 16:9 video.
Press a/b to select “PCM” or “Dolby
Press MENU and the MENU screen displays.
1
Digital”, and then press ENTER.
Selected item
PCM
Description
Press c/d to select “Digital Setup”.
2
The optical output terminal outputs
audio signal by PCM form. If your
digital audio system does not
support Dolby Digital, select
“PCM”.
Press a/b to select “Video Setup”, and then
press ENTER.
3
The optical output terminal outputs
audio signal by Dolby Digital form.
It reproduces sound from surround
program of digital.
Dolby Digital
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
You can connect many types of external equipment to your TV, like a DVD player, VCR, Digital TV tuner, PC,
HDMI equipment, game console and camcorder. To view external source images, select the input source with
INPUT on the remote control unit or on the TV.
Selecting the INPUT signal
Displaying an external equipment image
Explanation here is for the setting when connecting
DVD to INPUT1 terminal.
1
Press MENU and the MENU screen displays.
2
3
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
...
[
]
MENU Option Input Select
Option
Audio Only
3D Noise Reduction
[Low]
Mosquito Noise Reduction [Low]
Input Select
[Auto]
[Fixed]
[On]
Output Select
Quick Shoot
Caption Setup
Program Title Display
[No]
To watch a DVD image, select “INPUT1” from “INPUT
SOURCE” menu using INPUT on the remote control
unit or on the TV. (See page 61.)
4
Select the desired signal type.
For INPUT1 signal
INPUT SOURCE
TV
Auto
COMPONENT
VIDEO
CableBox [TV]
INPUT1
INPUT2
INPUT3
INPUT4
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
INPUT5
i.LINK
CAUTION
NOTE
• To protect all equipment, always turn off the TV before
connecting to a DVD player, VCR, Digital TV tuner, PC,
HDMI equipment, game console, camcorder or other
external equipment.
• If the image does not come in clearly, you may need to
change the input signal type setting on the “Input Select”
menu.
NOTE
• See pages 48 to 53 for external equipment connection.
• Please refer to the relevant operation manual (DVD player,
PC, etc.) carefully before making connections.
• Each time INPUT is pressed, the input source toggles.
• Refer to your external equipment operation manual for
the signal type.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting a DVD player
You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting to a DVD player and other
audiovisual equipment.
When using component cable.
Component
video cable
(commercially
available)
Audio cable
(commercially
available)
DVD player
When using composite cable.
AV cable (commercially
available)
DVD player
When using DVI cable. (INPUT 5)
ø 3.5 mm stereo minijack cable
DVI cable (commercially available)
(commercially available)
DVD player
NOTE
• See page 51 for connecting a DVD player with HDMI terminal.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting a VCR
You can use the INPUT 3 terminal when connecting a VCR and other audiovisual equipment.
NOTE
• The S-video terminal has priority over the video terminals.
• The G-LINK cable connection is necessary if you want to use the recording features of the TV Guide On Screen system
with your VCR.
G-LINK cable
AV cable
(commercially
available)
S-video cable
(commercially
available)
This connection is
This end is connected
necessary when
using TV Guide On
Screen’s recording
function.
(commercially
available)
to the TV.
VCR
G-LINK
cable
(OUTPUT)
(INPUT)
VCR
1 inch
G-LINK wand
NOTE
• When attempting to record copy protected material on a VCR or other recording device, the copy protection will activate
and the protected material will not be recorded correctly. In addition, attempting to display copy protected material on a
monitor connected via a VCR, whether for the purpose of viewing or not, will cause an inferior quality picture to be
displayed. This is not a fault of the equipment. Please view copy protected material by connecting the product directly to
the monitor.
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the
INPUT 3 terminals.
NOTE
• The S-video terminal has priority over the video terminals.
S-video cable
(commercially
available)
AV cable
(commercially
available)
Game console/Camcorder
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting a DigitalTV STB (Air or Cable)
You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting a Digital TV STB (Air or
Cable) and other audiovisual equipment.
NOTE
• If your cable-TV company has CableCARD security module available, you can also use the CableCARD security module
to receive HDTV programs. (See page 36.)
When using DVI cable. (INPUT 5)
When using component cable.
Component video
cable
(commercially
Audio cable
available)
(commercially
available)
ø 3.5 mm stereo minijack cable
(commercially available)
DVI cable
(commercially available)
Digital TV STB
Digital TV STB
NOTE
• See page 51 for connecting a Digital TV STB to HDMI terminal.
When using composite cable.
Cable box connection
(for TV Guide On Screen)
G-LINK cable
AV cable
(commercially
available)
This end is connected
to the TV.
Digital TV STB
Cable Box
G-LINK
cable
1 inch
G-LINK wand
NOTE
• To receive TV program listings in the TV Guide On Screen system, please connect your cable box
using this input, marked “VIDEO”. Do not connect the cable box to the “COMPONENT” video as you
will not receive any TV program listings.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting HDMI equipment
Please use the INPUT 4 terminal when connecting HDMI equipment.
HDMI cable
(commercially available)
HDMI equipment
Displaying an image from HDMI equipment
5
Press a/b to select the desired item and
1
To watch an HDMI equipment image, select
“INPUT4” from “INPUT SOURCE” menu
using INPUT on the remote control unit or
on the TV. (See page 61.)
press ENTER.
6
Press a/b/c/d to select the desired setting
and press ENTER.
INPUT SOURCE
TV
HDMI Setup
items
Selectable items
Description
CableBox [TV]
INPUT1
Signal
Type
Auto/RGB/YCbCr
4:4:4/YCbCr 4:2:2
Select the signal type from
an HDMI terminal. Unless
the image quality looks
INPUT2
obviously poor, select Auto.
INPUT3
Color
Matrix
Auto/ITU601/
ITU709
Select the internal color
space conversion method
when an RGB signal is
input. Normally, select
Auto.
INPUT4
INPUT5
i.LINK
Dynamic Standard/
Select the signal amplitude
range. Normally, select
Standard.
Range
Out of Standard
2
3
4
Press MENU and the MENU screen displays.
Auto View Enable/Disable
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
Press c/d to select “Option”.
NOTE
Press a/b to select “HDMI Setup”, and then
press ENTER.
• Refer to your external equipment operation manual for
the signal type.
...
[
]
MENU Option HDMI Setup
Option
Audio Only
3D Noise Reduction
[Low]
Mosquito Noise Reduction [Low]
HDMI Setup
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting a PC
Use the INPUT 5 terminal to connect a PC.
NOTE
• Refer to page 83 for a list of PC signals compatible with the TV.
ø 3.5 mm stereo
minijack cable
(commercially
available)
RGB/DVI conversion
cable
(commercially
available)
ø 3.5 mm stereo
minijack cable
(commercially
available)
DVI cable
(commercially
available)
PC with analog RGB terminal
PC with DVI terminal
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
PCM audio outputs from the terminal.
Optical fiber cable
To optical digital input of external audio devices
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Connecting two or more i.LINK devices
Connecting D-VHS decks/AV-HDD
recorder/Blu-ray Disc recorder
(i.LINK connection)
Up to 16 i.LINK devices can be connected using a
daisy-chain connection with i.LINK cables.
About i.LINK
i.LINK is an interface connection using a serial
transfer system and is able to transfer multimedia
data, such as digital images and digital sound,
between devices that have i.LINK terminals.
i.LINK is a term defined in the IEEE1394 (Institute of
Electrical and Electronics Engineers) standard.
Currently, the transfer speeds are at 100 Mbps, 200
Mbps and 400 Mbps, each of them expressed as
S100, S200 and S400 respectively. On this TV, the
maximum speed is 400 Mbps.
When 3 or more i.LINK devices are connected,
branch connection can be used. With branch
connections, up to 62 i.LINK devices can be
connected.
i. LINK devices that can be connected to this
TV.
Only D-VHS decks, AV-HDD recorders and Blu-ray
Disc recorders can be connected to this TV via
i.LINK. Other devices such as DVD recorders, digital
video cameras, computers or computer peripheral
devices do not meet the specifications for this TV
and therefore cannot be connected via i.LINK.
Even for the types of i.LINK device mentioned above,
device recognition, control, recording and playback
operations may not be possible on some devices.
Cautions regarding i.LINK connection
• Please use S400 type i.LINK cables.
• Some i.LINK devices may not relay data if their power
is off. In this case the device should be connected
at the end of any series of connections.
• This TV can relay data during power off, by selecting
“Active” in the “Standby Mode” option in “i.LINK
Setup”. (See page 54.)
Materials that can be recorded with the i.LINK
Only digital programs can be recorded by i.LINK
devices connected to this TV using the i.LINK. i.LINK
recording is not compatible with analog broadcasts
or external input signals (INPUT terminals 1 through
5).
• Please do NOT use a loop connection as shown in
the diagram.
i.LINK connection
NOTE
• Please make sure the
shapes of the terminal
and the plug match,
and insert the plug into
the terminal straight,
not on an angle.
• Use either one of the
terminals. These two
terminals do not differ
in quality or function.
• When using the i.LINK, do not turn off the power of,
or pull the cable from i.LINK devices, even if that
i.LINK devices is not in use. This may affect the
picture and the sound from an i.LINK device in use.
• If devices such as a DVD recorders, digital video
cameras, computers and computer peripheral
devices which are not compatible with this TV, are
connected to the TV using i.LINK, other i.LINK
connections may be disrupted.
i.LINK device
• When device recognition, control, recording or play
back, on an i.LINK connected device does not
function correctly, correct operation may be restored
by disconnecting and reconnecting the i.LINK cable.
• When connecting multiple i.LINK devices, depending
on the specifications and the interoperability of the
connected devices, their operation may not be stable.
In that case, disconnecting all devices not in use
and changing the method of connection may result
in stable operation.
Only an i.LINK cable is
needed to connect the TV
to i.LINK devices.
(VIDEO, S-VIDEO, and
AUDIO terminals need not
be connected.)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Setting the Recording Mode (i.LINK)
Setting the Standby Mode (i.LINK)
• The function for automatically adjusting the recording
mode of connected i.LINK devices can be turned
on or off.
• Since most of the currently available i.LINK devices
automatically recognize the transfer rates of the
pictures and sound being recorded and control the
recording mode accordingly, you should always
set this Mode to “Pass through” in normal
circumstances.
• Power consumption during standby mode can be
minimized by changing the setting of the “Standby
Mode” in “i.LINK Setup”.
• When i.LINK is not in use, select “Inactive” in
“Standby Mode”.
1
Press MENU and the MENU screen displays.
• Depending on the i.LINK devices used and the type
of broadcast being recorded, this TV may not adjust
the recording mode properly. In this case, please
set the “Recording Mode” to “Pass through”.
2
Press c/d to select “Digital Setup”.
3
Press a/b to select “i.LINK Setup”, and then
press ENTER.
1
Press MENU and the MENU screen displays.
4
Press a/b to select “Standby Mode”, and
then press ENTER.
2
Press c/d to select “Digital Setup”.
3
Press a/b to select “i.LINK Setup”, and then
press ENTER.
5
Press c/d to select “Active” or “Inactive”,
and then press ENTER.
“Active”: Power continues to pass through the i.LINK
circuit so data can be relayed.
“Inactive”: Power consumption is minimized during
stand-by mode. Data cannot be relayed at this
setting.
4
Press a/b to select “Recording Mode”, and
then press ENTER.
5
Press c/d to select “Auto” or “Pass
through”, and then press ENTER.
NOTE
• Normally, this should be set to “Pass through”.
• When the main power of the TV is in standby mode
(POWER indicator lights off), i.LINK control commands
cannot be received from an i.LINK device. This does not
change even if the “Standby Mode” is set to “Active”. To
control the TV from an i.LINK device, turn the TV power
on (POWER indicator lights up in blue).
• Data cannot be relayed between i.LINK devices when all
the following conditions are met: 1) More than one i.LINK
device is connected to the TV with i.LINK cables, 2)
“Standby Mode” is set to “Inactive”, and 3) The power of
the TV is in standby mode (POWER indicator lights off).
When the TV is connected between two i.LINK devices in
series, select “Active” in “Standby Mode” or connect the
TV at an end of the series as shown in the diagram.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Selecting an i.LINK device
Disabling the TV’s operation of an i.LINK device
•
By disabling the TV’s operation of an i.LINK device,
the device can be operated from another i.LINK device.
• In order to control an i.LINK device from the TV, you
must first choose the i.LINK device to be controlled.
• One i.LINK device can be chosen from up to 16
i.LINK connected decks.
• All i.LINK devices connected with i.LINK cables
should automatically appear in the selection screen.
1
Press i.LINK to display the i.LINK control
panel.
05
PWR
STOP
STOP
Model
Input
00:01:32
1
Press i.LINK to display the i.LINK control
panel.
• When there is no i.LINK device connected, the
message “No i.LINK model is available” appears. In
this case, please connect an i.LINK device. (See
page 53.)
05
PWR
STOP
STOP
Model
Input
00:01:32
• When there is no i.LINK device selected, the
selection screen appears. In this case, please go to
step 3.
• When there is no i.LINK device connected, “No
i.LINK model is available” appears. Please connect
an i.LINK device. (See page 53.)
• When there is no i.LINK device selected, the
selection screen appears. Please go to step 3.
2
Press a/b/c/d to select “Model”, and then
press ENTER.
• Selection screen appears.
2
Press a/b/c/d to select “Model”, and
press ENTER.
Press b to select “Cancel Connection” and
then press ENTER.
3
• Selection screen appears.
• Operation of the i.LINK device from the TV is
disabled.
i.LINK
1/1 [Thu] 1:33AM
Which model do you use?
Manufacturer Model
Type
i.LINK
1/1 [Thu] 1:33AM
Which model do you use?
Manufacturer Model
Type
Cancel Connection
Cancel Connection
3
Press a/b to select a device, and then press
ENTER.
Deleting registered i.LINK devices
• The control panel for the i.LINK device appears.
• Registered i.LINK devices can be deleted from a
list.
• If an i.LINK device is connected, it cannot be deleted
from the list.
NOTE
• Devices that cannot be used with this TV will not appear
in the selection screen.
• Depending on the i.LINK devices connected, the
manufacturer’s name and model name of some devices
may not display correctly.
• In the case where the manufacturer’s and model names
are not correctly displayed, disconnect the i.LINK cable.
Follow the procedure for “Deleting registered i.LINK
devices” and cancel all i.LINK devices you have registered
before reconnecting the i.LINK cable.
• When an item in the selection screen is grayed out, the
item is not recognized by the TV and cannot be selected.
(The item may not be connected properly.)
1
Press i.LINK to display the i.LINK control
panel.
2
Press a/b/c/d to select “Model”, and then
press ENTER.
05
PWR
STOP
STOP
Model
Input
00:01:32
• The i.LINK device selected above will be automatically
set as a recording device in the TV Guide On Screen
system and may be used to record digital broadcasts.
3
4
Press a/b to select a device to be deleted,
and then press ENTER.
i.LINK
1/1 [Thu] 1:33AM
Which model do you use?
Manufacturer Model
Type
Cancel Connection
Press c to select “Delete”, and then press
ENTER.
• The selected i.LINK device is deleted from the
list.
• Select “Cancel” if you do not want to delete
any device.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Controlling an i.LINK device
• An i.LINK compatible device can be controlled from the TV using the i.LINK control panel on the screen.
• The steps in “i.LINK Setup” on page 54 need to be completed beforehand.
• Please also refer to the operation manual of the i.LINK device to be used with this TV.
Basic operation
1 Press i.LINK to display the i.LINK control panel.
• The i.LINK button is also used to exit the i.LINK control panel.
2 Press a/b/c/d to select a function, and then press ENTER.
i.LINK control panel (D-VHS decks)
Cassette inserted
Manufacturer
Type of i.LINK
device
Current operation
Model
05
STOP
PWR
Model
Input
Go to Model Selection screen
Select input
00:01:32
STOP
Tape Counter
Function selected
with the cursor
Type of videotape
PWR
Power On/Off
STOP
SKIP BACK
REWIND
PLAY
FAST FORWARD
SKIP FORWARD
PAUSE
REC START
i.LINK control panel (AV-HDD recorder/Blu-ray Disc recorder)
Disk inserted
Manufacturer
Type of i.LINK
device
Current operation
Model
06
STOP
Current counter
position/Time*
PWR
REC LIST REC Oper.
Go to REC operation screen
Go to Model Selection screen
Select input
00:01:10 / 00:01:12
Free 61%
Model
Input
STOP
l30sec
k30sec
Repeat status
Remaining space
Function selected
with the cursor
PWR
Power On/Off
STOP
FAST FORWARD
SKIP FORWARD
REPEAT PLAYBACK
PLAY
PAUSE
EJECT
REC LIST
l30sec
GO TO REC LIST
SKIP BACK
REWIND
30 SEC SKIP BACK
k30sec
30 SEC SKIP FORWARD
NOTE
• The input selection button is used to select either i.LINK input or others.
• The EJECT button is displayed for Blu-ray Disc recorder only.
* Time: If you commence playback before Time is displayed, Time will not be displayed during the playback.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
NOTE
Automatic input switching to i.LINK
• IEEE1394 is the IEEE’s international standard.
• i.LINK and the i.LINK logo are registered trademarks of
Sony Electronic, Inc.
• Input mode can be set to automatically switch to
i.LINK when an i.LINK device connected to the TV is
played.
• A copy protection technology is used on i.LINK devices
that incorporate copyright protection. This technology has
received the approval of the Digital Transmission Licensing
Administrator (DTLA), an organization that administers
copyright protection technologies. Some picture and
sound data have restrictions on duplication. Such data
cannot be digitally copied using the i.LINK. Some picture
and sound data may not be able to be sent back and
forth between an i.LINK device that has DTLA copyright
protection technology and one that does not.
1
Press MENU to display the MENU screen.
2
Press c/d to select “Digital Setup”, and then
press ENTER.
Notes on i.LINK connection of D-VHS deck/AV-HDD
recorder/Blu-ray Disc recorder
• Even when a connected i.LINK device is playing, input
signal can be switched to input mode other than i.LINK
by shifting the cursor to the input selection button and
pressing ENTER.
3
Press a/b to select “i.LINK Setup”, and then
press ENTER.
• This TV may not be able to operate some i.LINK devices
using the control panel, or to display picture and/or sound
input from some i.LINK devices.
4
Press a/b select “i.LINK Autoswitch”, and
then press ENTER.
• When the TV’s control panel is used to record a program,
what is recorded with the i.LINK device are the pictures
and sound of the digital program that the TV is receiving.
• The i.LINK control panel cannot be used during timer
recording.
• There may be some programs which i.LINK devices
cannot record.
• With some i.LINK devices, the quality of the picture may
5
Press c/d to select “Yes”, and then press
ENTER.
i.LINK Autoswitch
Recording Mode
Standby Mode
be distorted during fast forwarding or rewinding.
Yes
No
Notes specifically on i.LINK connection of D-VHS deck
• Depending on the D-VHS deck, this TV’s i.LINK may not
allow viewing of VHS and S-VHS tape or analog recorded
D-VHS tape. In this case, connect the D-VHS deck’s
analog output with the TV’s analog input, and switch the
TV’s input mode to external input.
• If a D-VHS deck is operated with the TV’s control panel
during timer recording, the recording may fail. Do not use
the TV’s control panel to operate the D-VHS deck during
timer recording.
Recording digital programs with a D-VHS
deck (i.LINK)
• Before commencing this procedure, the steps in
“i.LINK Setup” on page 54 need to be completed
beforehand.
• Please also refer to the operation manual of the D-
VHS deck to be used with this TV.
• To record the picture and sound of a digital program which
the TV is receiving, use D-VHS tape. VHS or S-VHS tape
will not record.
Notes specifically on i.LINK connection of AV-HDD
recorder/Blu-ray Disc recorder
• Depending on the AV-HDD recorder and/or Blu-ray Disc
recorder, some functions, such as playback during
recording, display of the recording list screen during
recording, and so on, may not be able to be operated.
• Depending on the AV-HDD recorder and/or Blu-ray Disc
recorder, playback may stop automatically when switching
to another i.LINK device.
• If an AV-HDD recorder/Blu-ray Disc recorder is operated
with the TV’s control panel during timer recording, the
recording may fail. Do not use the TV’s control panel to
operate the AV-HDD recorder/Blu-ray Disc recorder during
timer recording.
1
Select a digital program to be recorded.
2
Press i.LINK to display the i.LINK control
panel.
05
STOP
PWR
Model
Input
00:01:32
STOP
Notes specifically on i.LINK connection of AV-HDD
recorder
• Depending on the AV-HDD recorder, it may be possible
to change the recorder’s operations mode (D-VHS mode,
HDD recorder mode). When the operations mode is D-
VHS mode, the HDD recorder is recognized as a D-VHS
Deck.
3
Press a/b/c/d to select E, and then press
ENTER.
• Recording starts.
• Select H and press ENTER to stop recording.
NOTE
• Input mode cannot be switched to i.LINK during recording.
• When a D-VHS deck connected to the TV is under timer
recording, the deck cannot be operated using the TV’s
control panel.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Recording digital programs with AV-HDD
recorder/Blu-ray Disc recorder
Playing back using REC LIST (i.LINK)
• You can display a list of the programs you have
recorded on AV-HDD recorder and Blu-ray Disc.
• Before commencing this procedure, the steps in
“i.LINK Setup” on page 54 need to be completed
beforehand.
• Please also refer to the operation manual of the AV-
HDD recorder/Blu-ray Disc recorder to be used with
this TV.
1
Press i.LINK to display the i.LINK control
panel.
2
Press a/b/c/d to select “REC LIST”, and
then press ENTER to display the REC LIST.
1
Select a digital program to be recorded.
3
Press a/b to select the desired program,
and then press ENTER.
2
Press i.LINK to display the i.LINK control
panel.
06
Capacity: Free
PLAY
61%
DELETE
LOCK/UNLOCK
3
Press a/b/c/d to select “REC Oper.”, and
then press ENTER.
HD
HD
HD
HD
HD
4
Press a/b/c/d to select E, and then press
ENTER.
• Recording starts.
• Select “REC STOP” and press ENTER to stop
recording.
4
5
Press c/d to select “PLAY”, and then press
06
STOP
ENTER.
PWR
REC STOP
REC PAUSE
Play Ope.
Model
– – : – –: – –
61%
Free
PLAY
OPE-
RATION
Input
Press c/d to select “From Top” or “From
current position”, and then press ENTER.
NOTE
• Input mode cannot be switched to i.LINK during recording.
• When the input mode is i.LINK, you cannot operate
recording.
• When an AV-HDD recorder/Blu-ray Disc recorder
connected to the TV is under timer recording, the recorder
cannot be operated using the TV’s control panel.
Selected item
From top
Description
Playback will start from the beginning of the
selected program.
From current
position
Playback will start from the point playback
stopped last time.
NOTE
• A program in the REC LIST may be deleted by performing:
Select the program s Press ENTER s Select “DELETE”
on REC LIST s Press ENTER s Select “Delete” s Press
ENTER
• A program in the REC LIST may be locked or unlocked
by performing:
Select the program s Press ENTER s Select “LOCK/
UNLOCK” s Press ENTER
• Depending on the device connected, the audio and
images of the program selected with the cursor may not
be displayed in the small play screen.
• Depending on the device connected, when the recording
list is displayed during recording, the recording may stop.
• The program information displayed in the title (Program
name, date and time, etc.) will be taken from the program
information for the program broadcast at the time
recording commenced.
• When recording several programs in succession, the
program information displayed will be that of the first
program recorded at the time recording originally
commenced.
• When playing back content recorded on other devices,
the program information in the title may not be displayed
correctly in some cases.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Image position (AV input mode
only)
Moving the picture on the screen
You can move the picture around on the screen.
For adjusting a picture’s horizontal and vertical
position.
Press a/b/c/d to move an image on the screen to
the desired position. Press ENTER to return to the initial
image position.
1
2
3
Press MENU and the MENU screen displays.
NOTE
• While pressing a/b/c/d, an on-screen image,
“Adjusting Position” displays to the desired position.
• This setting cannot be stored. Once the TV shuts down or
enters standby mode, the setting is erased. To move the
picture around the screen again, you must perform the
above procedure again.
Press c/d to select “Setup”.
Press a/b to select “Position”, and then
press ENTER.
• The image position setting using the steps on this page
can be stored. Select either according to your objectives.
• “TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” can
each adjust the image position setting on this page. The
same for view modes.
4
Press a/b to select “H-Pos.” or “V-Pos.”.
• An on-screen image from PC cannot be moved around.
• Even when the image fills the screen, its position can be
adjusted with this function.
H-Pos.
V-Pos.
[
[
0]
0]
–10
–20
+10
+20
• Press ENTER to reset the image to original positions.
Reset
Selected item
H-Pos.
Description
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
V-Pos.
5
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Adjustments are stored separately according to input
source.
• You can easily move the image position as shown on this
page, but when the power is switched off the image will
return to the previously memorized position.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Auto Sync. adjustment (PC input
mode only)
Fine Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
1
2
3
4
Press MENU and the MENU screen displays.
1
2
3
4
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press c/d to select “Setup”.
Press a/b to select “Auto Sync.”, and then
press ENTER.
Press a/b to select “Fine Sync.”, and then
Press c/d to select “Yes”, and then press
ENTER.
press ENTER.
• Auto Sync. starts and “Now adjusting the
image” displays.
Press a/b to select the specific
adjustment item.
...
MENU Setup Auto Sync.
[
]
H-Pos.
V-Pos.
Clock
[ 90]
[ 39]
[ 90]
[ 20]
–
–
–
–
+
+
+
+
Yes
No
Phase
Reset
5
Press c/d to adjust the item to your
desired position.
30%
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
NOTE
• When Auto Sync. is successful, “Completed” displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if “Completed” displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
Description
Selected item
H-Pos.
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
V-Pos.
Clock
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Adjust when the image flickers with vertical
stripes.
Adjust when characters have low contrast
or when the image flickers.
Phase
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
DVI input signal setting
Input Select
1
Press INPUT to select INPUT5.
INPUT SOURCE
TV
CableBox [TV]
INPUT1
INPUT2
Selecting input source
Use this menu to select the input source.
INPUT3
INPUT4
INPUT5
1
Press INPUT.
• A list of selectable sources appears.
i.LINK
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
2
Press MENU and the MENU screen displays.
2
• You can also select the input source by
pressing a/b.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
• When the CableBox is selected in TV Guide
On Screen setting, CableBox will be displayed
in the INPUT SOURCE screen. If you select
CableBox in the INPUT SOURCE screen you
can change the channels of the CableBox.
Press c/d to select “Option”.
3
4
Press a/b to select “Input Select”, and then
press ENTER.
...
[
]
MENU Option Input Select
Selecting input signal type
Option
For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals.
Audio Only
Input Select
Output Select
Quick Shoot
[ANALOG PC]
[Fixed]
1
Press MENU and the MENU screen displays.
[Off]
Press c/d to select “Option”.
5
2
Press a/b to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
...
[
]
MENU Option Input Select
3
Press a/b to select “Input Select”, and then
press ENTER.
DIGITAL PC
ANALOG PC
DIGITAL AV
ANALOG AV
Press a/b to select a signal type you want
4
to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any
color.
NOTE
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to “Auto”
when other equipment is connected will result in the
following connectivity priority.
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Picture Flip
Input Label
You can set the orientation of the picture.
Lets you set the input terminal displayed using the
INPUT SOURCE menu or channel display.
1
2
3
Repeat steps 1 and 2 in Input Label.
Press a/b to select “Picture Flip”, and then
press ENTER.
Press a/b to select the desired mode, and
then press ENTER.
[Standard]: normal image.
Press INPUT to select the desired input
mode.
ABC
1
2
Press MENU and the MENU screen displays.
[Mirror]: mirror image.
Press c/d to select “Setup”.
3
A B C
Press a/b to select “Input Label”, and then
press ENTER.
4
5
Press a/b/c/d to select the new name for
the input mode, and then press ENTER.
[Upside Down]: upside down image.
INPUT SOURCE
TV
ABC
CableBox [TV]
DVD
INPUT2
INPUT3
INPUT4
INPUT5
i.LINK
[Rotate]: rotated image.
A B C
(Example)
NOTE
• You cannot change labels if the INPUT SOURCE is TV, or
i.LINK.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
AV MODE
View mode for 4:3 Programs
AV MODE gives you six viewing options to choose
from to best match environment of the TV, which can
vary due to factors like room brightness, type of
program watched or the type of image input from
external equipment.
1
Press VIEW MODE.
• The View mode menu displays.
• The menu lists the view mode options
selectable for the type of video signal currently
received.
Press VIEW MODE or a/b while the View
mode menu is still on the screen.
2
• You can sequentially select a view mode that
has its own aspect ratio.
1
Press AV MODE.
• Present AV MODE displays.
View Mode
Side Bar
S. Stretch
Zoom
2
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
Stretch
Mode selection for TV, INPUT 1 to 5 and i.LINK mode
(Example)
Side Bar:
Suitable for viewing conventional 4:3
programs in their normal format.
AV MODE: STANDARD
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER
AV MODE: DYNAMIC
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs to
fill the screen.
AV MODE: DYNAMIC (Fixed)
Zoom:
Mode selection for the PC terminal
(Example)
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full screen.
AV MODE: STANDARD
AV MODE: USER [PC]
Selected item
STANDARD
Description
Stretch:
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
For a highly defined image in a normally
bright room
For a movie
MOVIE
GAME
Lowers image brightness for easier viewing
Allows the user to customize settings as
desired. You can set the mode for each
input source.
View mode for HD Programs
USER
The following modes are available for HD programs.
Changing image and sound settings to
factory preset values. No adjustments are
allowed.
DYNAMIC
(Fixed)
S.Stretch:
(Smart
stretch)
Suitable for stretching 4:3 programs to fill the
screen.
For a clear-cut image emphasizing high
contrast for sports viewing
Zoom:
Suitable for viewing wide-screen 2.35:1 aspect-
ratio programs in full screen.
DYNAMIC
Stretch:
Suitable for viewing wide-screen 1.78:1 aspect-
ratio programs.
NOTE
When viewing 1.85:1 programs, stretch mode
will still show very thin black bands at the top
and bottom of the screen.
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
Dot by Dot:
NOTE
Detects the resolution of the signal and
displays an image with the same number of
pixels on the screen.
• When using Dot by Dot, it is possible to see noise or bars
around different outer portions of the screen. Please
change view mode to correct this.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
a
View mode (for PC input mode)
You can select the screen size.
NOTE
View Mode
Normal
Zoom
• Connect the PC before making adjustments. (See page
52.)
• Selectable screen size may vary with input signal type.
Stretch
Dot by Dot
1
Press VIEW MODE.
• The View mode menu displays.
2
Press VIEW MODE or a/b to select a
desired item on the menu.
a
Screen size images.
Input signal
Normal
Zoom
Stretch
Dot by Dot
Keeps the original
aspect ratio in a full aspect ratio in a full the screen.
screen display.
Keeps the original
An image fully fills
Detects the
resolution of the
signal and
displays an image
with the same
number of pixels
on the screen.
screen display. The
top and bottom of
the image is slightly
cropped.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Input signal (for PC input mode)
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
3
4
Press a/b to select “3D Noise Reduction”,
and then press ENTER.
Press a/b to select the desired level, and
then press ENTER.
Off
High
Low
640g400
640g480
1024g768
720g400
848g480
1280g768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 6 input signals listed above.
Mosquito Noise Reduction
Reduces fine detail mosquito noise.
1
Repeat steps 1 and 2 in 3D Noise
Reduction.
Press a/b to select “Mosquito Noise
Reduction”, and then press ENTER.
2
3
Press a/b to select the desired level, and
then press ENTER.
1
2
3
4
Press MENU and the MENU screen displays.
Description
Selected item
For normal images
Off
Press c/d to select “Setup”.
For enhanced Mosquito Noise Reduction
For moderate Mosquito Noise Reduction
High
Low
Press a/b to select “Input Signal” and then
press ENTER.
Audio Only
When listening to music from a music program, you
can set the Liquid Crystal display off and enjoy audio
only.
Press a/b to select the desired input signal
on the display.
Example
Repeat steps 1 and 2 in 3D Noise
Reduction.
1
640 x 480
848 x 480
Press a/b to select “Audio Only”, and then
press ENTER.
2
Press c/d to select “On”, and then press
ENTER.
3
3D Noise Reduction
Produces a clearer video image.
Description
Selected item
Audio is output without screen image.
Both screen images and audio are output.
On
Off
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Output Select
2
Each time you press SLEEP, the remaining
time switches as shown below.
Allows you to select what controls the audio output.
• When set, the time automatically starts counting
down.
1
2
3
4
Press MENU and the MENU screen displays.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before time expires, the remaining
time displays each minute.
Press c/d to select “Option”.
Sleep Timer:
Sleep Timer:
Sleep Timer:
Sleep Timer:
Off
30
60
90
Press a/b to select “Output Select”, and
then press ENTER.
Press c/d to select “Fixed” or “Variable”,
and then press ENTER.
Description
Selected item
Fixed
• Sound via speaker is adjusted with VOL
k/l on the remote control unit or VOL l/
k on the TV.
• Sound via the MONITOR OUT terminal is
not adjustable and constantly outputs.
• Sound via the MONITOR OUT terminal is
adjusted with VOL k/l on the remote
control unit or VOL l/k on the TV.
• Sound via speaker is muted.
Variable
Sleep Timer:
120
NOTE
• Select “Off” by pressing SLEEP to cancel the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
• When the sleep timer is working, its indicator on the TV
lights red.
Quick Shoot
Use Quick Shoot to view fast-action video more clearly.
1
Repeat steps 1 and 2 in Output Select.
Program Title Display
Press a/b to select “Quick Shoot”, and then
press ENTER.
Select the CH display when changing channels for
digital broadcasting.
2
Press MENU and the MENU screen displays.
1
Press c/d to select “On”, and then press
ENTER.
3
NOTE
2
Press c/d to select “Option”.
• If video noise occurs, turn the function “Off”.
SleepTimer
3
Press a/b to select “Program Title Display”,
and then press ENTER.
Allows you to set a time when the TV automatically
switches to standby.
4
Press c/d to select “Yes” or “No”, and then
press ENTER.
Selected item
Description
“Program Info.” displays
“Program Info.” does not display
Yes
No
1
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remaining
30
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Useful adjustment settings
Closed Captions and Digital Closed
Captions
1
2
Press CC.
• This will present the Closed Caption information
display.
• Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations,
narration and sound effects as subtitles on your TV.
Closed Captions are available on some TV programs,
and on some VHS home video tapes, at the election
of the program provider.
Press CC while the Closed Caption
information is still on the screen.
• Press repeatedly until you select a closed
caption service which you prefer.
• Digital Closed Caption service is a new caption
service available only on digital TV programs (also
at the election of the service provider). It is a more
flexible system than the original Closed Caption
system, because it allows a variety of caption sizes
and font styles. When the Digital Closed Caption
service is in use, it will be indicated by appearance
of a 3-letter abbreviation that also indicates the
language of the Digital Closed Captions: ENG
(English) or SPA (Spanish) or FRA (French), or other
language codes.
• Not all programs and VHS videotapes offer closed
caption. Please look for the “N” symbol to ensure
that captions will be shown.
• In the Closed Caption system, there can be more
than one caption service provided. Each is identified
by its own number. The “CC1” and “CC2” services
display subtitles of TV programs superimposed over
the program’s picture.
Air
ANALOG
2
Audio
CC
:
:
MONO
1/2 CC1
Closed Caption
information
• Depending on the number of caption services
in the signal being received, you will see
information such as 1/2 or 1/4 displayed.
1/2 means “the first of two services”.
Example:
If a program has three services (Digital
CC(ENG), CC1 and Text1), the closed caption
display will toggle in this sequence:
1/3 ENG
2/3 CC1
3/3 Text1
OFF
• The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3ENG)
you selected is not available for the next
program, or on another channel, the closed
caption service that is available is automatically
selected, and this service appears in
parentheses, e.g.1/3(CC1).
Closed caption services that appear in
parentheses will not be recorded in the CC
button’s memory as your last selected service.
Only services that you have selected with the
CC button are recorded.
• In the Closed Caption system, the “Text1” or “Text2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
Examples:
In a case where there are two closed caption
services provided, (for instance, Digital CC(ENG)
and CC1), and Digital CC(ENG) is displayed as
your current selection, if Digital CC(ENG) is not
broadcast for the next program, the other closed
caption service, CC1, will be displayed in
parentheses.
A closed caption service appears in parentheses
because the service you selected is not available
and a different service is displayed on your
screen. “1/1(CC1)” is displayed instead of “1/2/
ENG”.
NOTE
• See page 68 for detailed closed caption settings.
• When using Freeze functions, closed captions will not be
displayed on the right-most screen (still image).
• When the program contains no closed caption, “--”
displays in the closed caption information.
• If the language code, e.g. “ENG”, is not found on Digital
TV programs, “--” will be shown.
• Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may
contain none, or only some of these services, at the
election of the program provider.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Caption Setup
This function allows you to adjust the closed caption
screen appearance to suit your preference.
1
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
2
3
4
Press a/b to select “Caption Setup”, and
then press ENTER.
Press a/b to select a specific adjustment
item.
•
You can choose 7 items here; they are,
1 “Caption Size”,
2 “Font Style”,
3 “Foreground Color”,
4 “Foreground Opacity”,
5 “Background Color”,
6 “Background Opacity” and
7 “Character Edge”.
Caption Size
Default
Default
Default
Default
Default
Default
Default
Font Style
Foreground Color
Foreground Opacity
Background Color
Background Opacity
Character Edge
Reset
A B C
123
Press c/d to select the desired parameter.
5
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Each default value is specified by broadcasting station
where available.
Selectable items available for “Font Style”.
Description
Selected item
Default
The font specified by broadcasting station
or default font.
Type 0
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Proportional font used in the MENU screen.
Monospaced with serifs.
Proportionally spaced with serifs.
Monospaced without serifs.
Proportionally spaced without serifs.
Casual font type.
Cursive font type.
Small capitals.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Secret number setting for parental
control (AV input mode only)
Select “New Secret No.”, and then press
ENTER.
Input the new 4-digit secret number by using
0 – 9.
5
Allows you to use a secret number to protect certain
settings from being accidentally changed.
New Secret No.
IMPORTANT:
Secret No. Clear
Three conditions must be met to enable V-Chip (see
pages 69 to 74):
–
–
–
–
–
–
–
–
–
–
–
–
Input Secret No.
New Secret No.
Reconfirm
1 Secret No. is registered.
2 V-Chip settings have been made.
3 “Status” is set to “On”.
Input the same 4-digit number on the
“Reconfirm” screen as in step 5 to confirm.
6
7
New Secret No.
Secret No. Clear
Input Secret No.
New Secret No.
Reconfirm
–
–
–
–
*
*
*
*
–
–
–
–
Press RETURN to start configuring V-Chip
settings. (See pages 72 and 74 for details.)
Setting parental control status
Used to enable or disable the parental control function.
Repeat steps 1 to 3 in Setting a secret
1
number.
• Secret number setting menu displays.
2
Input the 4-digit secret number by using 0 –
9.
Setting a secret number
1
2
3
4
Press MENU and MENU screen displays.
Press a/b to select “Status”, and then press
3
4
ENTER.
Press c/d to select “Setup”.
Press c/d to select “On” or “Off”, and then
press ENTER.
• Select “On” to enable and “Off” to disable
Parental CTRL.
Press a/b to select “Parental CTRL”, and
then press ENTER.
V-Chip
Secret No.
Status
Press a/b to select “Secret No.”, and then
press ENTER.
MENU Setup Parental CTRL Secret No.
On
Off
...
...
[
]
V-Chip
Secret No.
Status
NOTE
• You can skip step 1 and 2 above while in Parental CTRL
screen.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Clearing the secret number
Allows you to clear your secret number.
1
Repeat steps 1 to 3 in Setting a secret
number.
• Secret number setting menu displays.
Changing the secret number
Allows you to change your current secret number.
2
Input the 4-digit secret number by using 0 –
9.
1
Repeat steps 1 to 3 in Setting a secret
3
Press a/b to select “Secret No.”, and then
press ENTER.
number.
• Secret number setting menu displays.
Press a/b to select “Secret No. Clear”, and
then press ENTER.
4
2
Input the 4-digit secret number by using 0 –
9.
5
Press c/d to select “Yes”, and then press
ENTER.
• Your secret number is cleared.
3
Press a/b to select “Secret No.”, and then
press ENTER.
New Secret No.
4
Press a/b to select “New Secret No.”, and
then press ENTER.
Secret No. Clear
Yes
No
5
Input the old 4-digit number you have set
using 0 – 9.
...
...
[
]
MENU Setup Parental CTRL Secret No.
New Secret No.
Secret No. Clear
NOTE
–
–
–
–
–
–
–
–
–
–
–
–
Input Secret No.
New Secret No.
Reconfirm
• See page 69 for re-registering with a new secret number
after being cleared.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place. If you
lose or forget your secret number, initialize the
Liquid Crystal Television to return all settings except
for the TV channel settings to factory preset values.
(See page 87.)
• If the secret number is cleared the Status setting
automatically sets to “Off”. “V-Chip” and “Status” will not
be selectable from the menu.
6
7
Input the new 4-digit number using 0 – 9.
New Secret No.
Secret No. Clear
–
–
–
–
–
–
–
–
–
–
–
–
Input Secret No.
New Secret No.
Reconfirm
Input the same 4-digit number on the
“Reconfirm” screen as in step 6 to confirm.
New Secret No.
Secret No. Clear
Input Secret No.
New Secret No.
Reconfirm
–
–
–
–
*
*
*
*
–
–
–
–
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Parental control (setting V-CHIP level)
V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over
broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing
while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your
Liquid Crystal Television.
“V-Chip” and “Status” will not be selectable from the menu if you do not first configure your secret
number. (See page 69 for Secret number setting for parental control.)
• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate
television shows from their children.
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as
watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.
Voluntary movie rating system (MPAA)
Rating
Description
G
General audiences. All ages admitted.
PG
Parental guidance suggested. Some material may not be suitable for children.
PG-13
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Age
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some
jurisdictions).
R
NC-17
X
No one 17 and under admitted.
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
...
...
[
]
MENU Setup Parental CTRL V-Chip
a
• If you select “PG-13”, this will automatically block the higher ratings
MPAA
“R”, “NC-17” and “X”.
TV Guidelines
Can. English Ratings
Can. French Ratings
G
NOTE
PG
PG-13
• Voluntary movie rating system only uses an age-based rating.
R
NC-17
X
NONE
TV Parental Guidelines
Content
FV
V
S
L
D
Rating
(Fantasy (Violence)
(Sexual
(Adult
(Sexually
violence)
situation) language) suggestive
dialog)
TV-Y (All children)
TV-Y7 (Directed to older children)
TV-G (General audience)
X
Suggested
age
TV-PG (Parental Guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
X
X
X
X
X
X
X
X
X
X
X
X: Content rating can be set.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
TV Parental Guidelines (TV Guidelines)
1
Repeat steps 1 to 5 in Voluntary movie
rating system (MPAA).
Press a/b to select “TV Guidelines”, and
then press ENTER.
2
Voluntary movie rating system (MPAA)
Press a/b to adjust the item to your desired
3
1
2
3
Press MENU and the MENU screen displays.
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
Press c/d to select “Setup”.
Example
MPAA
TV Guidelines
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
Press a/b to select “Parental CTRL”, and
then press ENTER.
• Secret number setting menu displays only
when “Secret No.” is set. (See page 69.)
• “V-Chip” and “Status” will not be selectable
from the menu if you do not first configure your
secret number. (See page 69.)
TV-PG
TV-14
TV-MA
NONE
S
V
FV
When setting an individual content-based rating
item, do as follows:
1 Press d to access block content items from
the currently selected age-based rating item.
2 Press a/b to select an individual item, and
then press ENTER to unblock (“ ” is
removed). Repeat the same steps for other
items.
4
5
Input the 4-digit secret number by using 0 –
9.
Press a/b to select “V-Chip”, and then press
ENTER.
3 Press c or RETURN to register after all
...
...
[
]
MENU Setup Parental CTRL V-Chip
individual content rating items are set.
Example
V-Chip
Secret No.
Status
MPAA
TV Guidelines
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
TV-PG
TV-14
TV-MA
NONE
S
V
FV
Press a/b to select “MPAA”, and then press
6
7
• If Status is not set to “On” the configuration
settings will not work. (See page 69.)
ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
Press RETURN.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page 69.)
Example
MPAA
TV Guidelines
G
Can. English Ratings
Can. French Ratings
PG
PG-13
R
NC-17
X
NONE
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into
consideration other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Rating
Description
Exempt: Includes news, sports, documentaries and other information programming; talk
shows, music videos, and variety programming.
E
C
Children: Intended for younger children under the age of 8 years. Pays careful attention to
themes that could threaten their sense of security and well-being.
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see on the screen.
C8e
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
Age
G
Parental Guidance: Intended for a general audience, but may not be suitable for younger
children (under the age of 8) because it could contain controversial themes or issues.
PG
Over 14 Years: Could contain themes where violence is one of the dominant elements of
the storyline, but it must be integral to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
14e
Adults: Intended for viewers 18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
18e
Canadian French ratings
Rating
Description
Exempt programming.
E
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot in a humorous or unrealistic manner.
G
General but inadvisable for young children: May be viewed by a wide public audience, but
could contain scenes disturbing to children under 8 who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
8anse
Age
Over 13 years: Could contain frequent violent scenes and therefore recommended for
viewing with parent.
13anse
16anse
18anse
Over 16 years: Could contain frequent violent scenes and intense violence.
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Canadian English ratings
Canadian French ratings
1
Repeat steps 1 to 5 in Canadian English
ratings.
1
2
3
Press MENU and the MENU screen displays.
Press a/b to select “Can. French Ratings”,
and then press ENTER.
2
3
Press c/d to select “Setup”.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page 69.)
Press a/b to select “Parental CTRL”, and
then press ENTER.
• Secret number setting menu displays only
when “Secret No.” is set. (See page 69.)
• “V-Chip” and “Status” will not be selectable
from the menu if you do not first configure your
secret number. (See page 69.)
Example
MPAA
TV Guidelines
E
Input the 4-digit secret number by using 0 –
9.
4
5
Can. English Ratings
Can. French Ratings
G
8ans+
13ans+
16ans+
18ans+
NONE
...
[
]
MENU Setup Parental CTRL
Setup
Option
Secret No.
– – – –
How to temporarily release the
V-CHIP BLOCK
Press a/b to select “V-Chip”, and then press
ENTER.
V-Chip
• The V-CHIP BLOCK is working and censors a
broadcast, “V-CHIP HAS BEEN ACTIVATED.”
displays.
Secret No.
Status
1
Press ENTER while the V-CHIP is working
and then the secret number setting menu
displays.
2
Enter your 4-digit secret number with 0 – 9.
At this time V-CHIP BLOCK temporarily
releases.
6
7
Press a/b to select “Can. English Ratings”,
and then press ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page 69.)
Reactivating the temporarily released
V-CHIP BLOCK
• You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Example
Method 1:
MPAA
Select “Status” setting from the Parental CTRL menu
to reactivate BLOCK. (See page 69.)
E
TV Guidelines
C
Can. English Ratings
Can. French Ratings
C8+
G
Method 2:
Select “V-Chip” setting (“MPAA”, “TV Guidelines”,
“Can. English Ratings” or “Can. French Ratings”)
from the Parental CTRL to reactivate BLOCK. (See
pages 72 and 74.)
PG
14+
18+
NONE
Method 3:
Switch off the TV power.
NOTE
• Performing any of the three above will activate the V-CHIP
BLOCK.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
Viewing information of the program
2
3
Update the still image by pressing ENTER.
• Each time you press ENTER, the image on the
right screen updates.
You can view information about a program you are
currently watching.
Press FREEZE to exit still image.
NOTE
• This function does not work in INPUT 4 (HDMI) and INPUT
5 (DVI-I).
• When this function is not available, “No displaying still
image available” will display.
1
Press INFO while watching a broadcast.
• Information of the current program will be
displayed.
• The still image is automatically erased after 30 minutes.
• If you are using freeze function and a broadcast activates
the V-CHIP BLOCK, freeze function will be cancelled and
a V-CHIP BLOCK message will appear.
PBS WGBH-HD
20:00
2.1
American Family – – – Journey of Dreams
21:00
Presetting remote control function
Sample program information
• If the program you are receiving is copy-
protected, an icon will be displayed in the
program information. Recording digital
programs via i.LINK, or recording digital audio
via digital audio output terminals, is restricted.
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function for your
remote control unit.
Icon
Description
Digital copying prohibited
One digital copy only
NOTE
Presetting manufacturer codes
• Sometimes the name of the program is not broadcast. In
that case, the program name will not be displayed.
1
Press FUNCTION until the LED for your
device lights up.
Picture and still image
You can display two same-sized pictures – one moving
and one still.
2
After the LED for your device lights up, if you
press FUNCTION and DISPLAY and enter
the code registration mode, the LED will
blink.
3
Press 0 – 9 to enter the manufacturer code.
(See page 76.)
• Preset mode is finished once the LED no longer
lights up.
1
Press FREEZE.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press FREEZE.
4
After registering the code, the LED will stop
blinking then turn off after one second. (If
you perform an incorrect operation, the LED
will blink quickly then turn off.)
FREEZE
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
Manufacturer codes
REMOTE CONTROL
CODE NUMBER
REMOTE CONTROL
CODE NUMBER
VCR BRAND
DVD/LD BRAND
Denon
Akai
25, 26, 37
15, 22, 30
32
04
34
10, 31
04
34
15, 22, 30
29
21, 32, 35
09, 10, 11
28, 29
04
24
06, 47
04
02
09, 13
21
04
04
06
02, 22
04, 23
08, 11, 20
03
03, 24
07, 12
01, 10
05, 25
04
Audio
Broksonic
Canon
Capehart
Craig
Curtis Mathis
Daewoo
DBX
JVC
Kenwood
Magnavox
Marantz
Mitsubishi
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
Zenith
Dynatech
Emerson
Fisher
Funai
G.E.
Goldstar
Hitachi
Instant Replay
JC Penney
JVC
02
04
04, 06, 24, 30
15, 41, 42, 53
14, 15
29
04, 05, 08
31
Kenwood
Lloyds
REMOTE CONTROL
CODE NUMBER
CATV/SAT BRAND
Magnavox
Magnin
Marantz
Memorex
Minolta
Mitsubishi
Montgomery Ward
Multitech
NEC
Panasonic
Pentax
Philco
Philips
RCA
Realistic
Samsung
Sanyo
Scott
Sears
Sharp
Shintom
Sony
Anvision
Cable Star
Eagle
General Instrument
04, 05
04, 05
05
02, 03, 07, 12, 13, 14,
19, 22
02, 03, 07, 12, 13, 14,
19, 22, 31, 32, 33, 34,
35, 36, 37, 38, 39, 40
04, 05, 09, 14, 17, 18,
20, 21, 24, 25
8
30
04, 10, 24, 29
06
17, 18, 39, 40
02, 43
29
15, 22, 30
44, 45
05, 06
05
05, 08
06, 07, 33, 51
01, 02, 10, 24
23, 31
10, 14, 52
20
06, 11, 24
01, 02, 03
36
12, 13, 38
29
05, 08
29
15
Jerrold
Magnavox
Oak Sigma
Panasonic
Philips
16, 23
04, 05, 09, 15, 17, 18,
20, 21, 24, 25
08, 10, 29, 30, 43*, 46
04, 05
16, 27, 44*, 45*
01, 26
Pioneer
Randtek
RCA
Scientific Atlanta
Sony
28
04, 05, 09, 15, 17, 18,
20, 21, 24, 25
06, 14
Viewstar
Zenith
Sound Design
Sylvania
Symphonic
Tatung
NOTE
• Numbers marked with * are SAT codes, all others are CATV
codes.
Teac
15, 29
27, 29
29
Teknika
Thomas
TMK
REMOTE CONTROL
AUDIO BRAND
CODE NUMBER
21
Toshiba
Video Concepts
Yamaha
Zenith
19, 20
30
15, 29, 30
16
Sharp
01
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
Cable control buttons
When the FUNCTION is set to CBL/SAT the cable
converter connected to the TV can operate using 1 to
4.
1
1
2
SOURCE POWER
Turns the cable converter power on and off.
0 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3
4
FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
2
CH r/s
Press CH r or CH s to tune in a higher or lower
channel.
3
4
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
SAT control buttons
1
SOURCE POWER
Turns the Satellite broadcast tuner power on and off.
2
0 – 9, • (DOT)
1
2
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3
ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
3
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
VCR control buttons
8
The remote control unit button will function as follows
when the FUNCTION of the remote control unit is set
to VCR.
• When the input selector button having the same
number as the input terminal connecting the VCR is
pressed, the VCR can operate using 1 to 8.
2
4
7
3
1
2
3
4
5
6
7
8
CH r/s
Press to select the channel of the TV tuner on the VCR.
SOURCE POWER
Turns the power of the VCR on and off.
6
5
F
Sets pauses and still pictures.
G
Rewinds the tape and allows picture search.
H
Stops the tape transport.
REC
Starts recording.
1
J
Rapidly advances the tape and allows picture search.
I
Starts playback.
DVD control buttons
The remote control unit button will function as follows
when the FUNCTION of the remote control unit is set
to DVD.
• When the input selector button having the same
number as the input terminal connecting a DVD
player is pressed, these players can operate using
1 to 10.
3 10
1
U
Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter.
2
T
5
6
2
1
9
4
Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press it, you
move back to the start of the previous chapter.
3
4
5
6
SOURCE POWER
Turns the power of the DVD player on and off.
F
Sets pauses and still pictures.
G
Continue pressing to go backward.
H
Playback stops when pressing once.
With some DVD players, pressing the button twice may
open the disc tray.
7
8
MENU
When this button is pressed, the DVD menu will display.
7
ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DVD
MENU screen.
8
9
J
Continue pressing for fast forward.
10 I
Starts playback.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Other viewing options
Notice
■ When you change your address
• If you change your address, please return the
CableCARD security module to your Cable Provider
Company.
• You will need to request a new CableCARD security
module from the cable provider at your new location.
■ About EAS (Emergency Alert System)
• In the case of a national emergency, natural disaster,
or other emergency situation, Cable MSO will
broadcast an Emergency Alert Message (EAS
message). When this unit receives an EAS message,
if the level of emergency is comparatively low, an
alert text message will be displayed on screen. If
the level of emergency is high, the receiver will be
force tuned to a details channel.
• Alert text messages will be displayed, and force
tuning will occur, even during paid programming.
Even when force tuning is active, the user can still
change the channel.
• If the unit is force tuned to a channel that has been
blocked by Parental Control, the Parental Control
setting will be given priority.
NOTE
• If you have a digital cable antenna connected, you can
receive EAS messages whether CableCARD security
module is inserted or not.
• EAS messages may be broadcast not only via digital
cable, but also via Analog Cable or over-the-air Analog
transmission.
• When force tuning occurs, Video output from the
MONITOR OUT terminal will also be switched to the
details channel.
• An alert text message does not output from MONITOR
OUT terminal.
• While TV Guide On Screen is on display, force tuning
and alert text messages are NOT available and the
details channel will not be displayed on the full screen.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
2
1
3
Unfasten the screw used to
secure the bracket in place.
Unfasten the four screws used to
secure the stand in place.
Detach the stand from the TV.
(Hold the stand so it will not drop from
the edge of the base area.)
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
NOTE
• To attach the stand, perform the above steps in reverse order.
Setting the TV on the wall
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)
Vertical mounting
Angular mounting
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed TV POWER on the remote control unit. (See page 18.)
If the indicator on the TV is off, press POWER on the TV.
• Is the AC cord disconnected? (See page 6.)
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning on the power of the TV
or unplugging the AC cord and replugging it in after 1 or 2 minutes.
• Unit cannot be operated.
• Is the FUNCTION set correctly? Set it to the TV setting position.
• Are batteries inserted with polarity (e, f) aligned? (See page 8.)
• Are batteries worn out? (Replace with new batteries.)
• Remote control unit does not
operate.
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Is the image position correct? (See page 59.)
• Picture is cut off/with sidebar
screen.
• Are screen mode adjustments such as picture size made correctly? (See pages
63 and 64)
• Adjust the picture tone. (See pages 41 to 42.)
• Strange color, light color, or color
misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 61.)
• Is the sleep timer set? (See page 66.)
• Power is suddenly turned off.
• Check the power control settings. (See page 45.)
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean the vent.
• Is connection to other components correct? (See pages 48 to 53.)
• Is correct input signal source selected after connection? (See page 61.)
• Is the correct input selected? (See page 61.)
• No picture
• Is a non-compatible signal being input? (See page 83.)
• Is picture adjustment correct? (See pages 41 to 43.)
• Is “On” selected in “Audio Only”? (See page 65.)
• If, after inserting the CableCARD security module, you are unable to receive
broadcast service, remove the CableCARD security module and reinsert.
• Is the volume too low? (See page 34.)
• No sound
• Is “Variable” selected in “Output Select”? (See page 66.)
• Verify your antenna cable is connected property.
• Upgrade is displayed continuously.
• Reinsert the CableCARD security module. If the trouble still exists after reinserting
the CableCARD security module and verifying the antenna cable, please contact
your Cable Provider Company.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: –4°F to +140°F (–20°C to +60°C)
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting-TV Guide On Screen
Problem
Possible Solution
• LISTINGS disappeared after a
power failure.
• You should begin to receive listings again within 24 hours.
• Some channel numbers in the TV
Guide On Screen are incorrect.
• You can correct them using “Changing channel display” under SETUP.
• You have not received any local
program listings.
Listings usually appear within 24 hours after a successful Setup.
• Check the connections between the TV, cable, antenna, and the G-LINK cable if
using a cable box.
• Verify Setup information under “Changing system settings”.
• Make sure the cable box is on, if applicable.
• Review step 3 and step 4 of “Basic Initial Setup” on page 22.
• A program you set to record did
not record.
• Make sure your recorder is turned off before the recording begins.
• Make sure there is free space available for recording on the tape or recording
device.
• Check the SCHEDULE menu and verify that the program is listed, before
recording begins.
• Check the placement of the G-LINK cable in front of your recorder.
• The TV did not tune to a program
you scheduled with the reminder
feature.
• Check the SCHEDULE menu and verify that the program is listed.
• If you have a cable box, check the G-LINK cable.
• You set a program to “auto tune
TV” and it did not.
• Check the SCHEDULE menu and verify that the program is listed as a Reminder.
• Highlight the program under LISTINGS and do the following:
- Press MENU on the remote control.
- Use b to highlight “edit reminder”, and press ENTER.
- Verify that the “auto tune TV” option reads “yes”.
• The TV must be on at the scheduled time for “auto tune TV”.
• You set a program with the “power
on TV” option and it did not.
• Check the SCHEDULE menu and verify that the program is listed as a Reminder.
• Highlight the program under LISTINGS and do the following:
- Press MENU on the remote control.
- Use b to highlight “edit reminder”, and press ENTER.
- Verify that the “power on TV” option reads “yes”.
• The TV must be off at the scheduled time for “power on TV”.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting-Digital broadcasting
■ The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code
Possible Solution
• Check the antenna cable. Check that the antenna is correctly
setup.
• Failed to receive broadcast.
E202
• No broadcast now.
• Check the broadcast time in the program guide.
E203
■ The cautions about i.LINK
Caution sentence
Possible Solution
• Record/Playback may fail on the selected model.
• Displayed when you have selected a device that is not
compatible with the TV, or that does not have DTLA copy
protection technology installed.
• Wrong connection or no i.LINK connection was • Displayed when a problem is experienced with a connection
found. Refer to Operation Manual on connection.
using i.LINK cable. Check the connection, and re-connect the
cable if necessary.
• The selected model is disabled to record/play. • Displayed when the device you have selected is already being
Check that no other model is used.
used by another i.LINK connected device. To operate the
selected device from the TV, you will first have to override
control from the other device.
PC compatibility chart
PC/MAC
Resolution
640 x 400
Horizontal Frequency Vertical Frequency VESA Standard
PC
31.5 kHz
37.9 kHz
31.5 kHz
37.9 kHz
31.5 kHz
37.9 kHz
37.5 kHz
43.3 kHz
31.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
53.7 kHz
48.4 kHz
56.5 kHz
60.0 kHz
68.7 kHz
45.0 kHz
48.1 kHz
64.0 kHz
34.9 kHz
49.7 kHz
60.2 kHz
60 Hz
85 Hz
60 Hz
85 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
70 Hz
75 Hz
85 Hz
60 Hz
60 Hz
60 Hz
67 Hz
75 Hz
75 Hz
O
720 x 400
O
O
O
O
O
VGA
640 x 480
848 x 480
WVGA
SVGA
O
O
O
O
O
O
O
O
O
800 x 600
XGA
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
640 x 480
WXGA
SXGA
VGA
O
MAC13"
MAC16" SVGA
MAC19" XGA
832 x 624
1024 x 768
Apple and Macintosh are registered trademarks
of Apple Computer, Inc.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of
Sun Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Co., Inc.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
RS-232C port specifications
PC Control of the TV
• When a program is set, the TV can be controlled from the PC using the RS-232C terminal.
The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the
connections.
NOTE
• This operation system should be used by a person who is accustomed to using computers.
Communication conditions
Set the RS-232C communications settings on the PC to match the TV’s communications conditions.
The TV’s communications settings are as follows:
Baud rate:
Data length:
Parity bit:
9,600 bps
8 bits
None
1 bit
Stop bit:
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending
the next command.
Command format
Eight ASCII codes e CR
Command 4-digits:Command. The text of four characters.
C1 C2 C3 C4 P1 P2 P3 P4
Parameter 4-digits:Parameter 0 – 9, x, blank, ?
Command 4-digits
Parameter 4-digits Return code
Parameter
Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4 values are input for the
parameter.)
When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.)
Any numerical value can replace the “x” on the table.
0
0
Ϫ
1
0
3
0
0
0
0
0
5
9
5
0
When “?” is input for some commands, the present setting value responds.
?
?
?
?
?
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Response code format
Normal response
O
K
Return code (0DH)
Problem response (communication error or incorrect command)
E
R
R
Return code (0DH)
Command table
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
POWER SETTING
INPUT SELECTION A TOGGLE
COMMAND PARAMETER
CONTROL CONTENTS
P
I
O
T
T
A
I
W
G
V
R
D
D
D
K
1
0
x
x
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
It shifts to standby.
(Toggle)
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
It input-switches to INPUT1~INPUT5.
It input-switches to i.LINK.
An input change is also included.
TV
INPUT1-5
i.LINK
I
I
L
I
V
N
P
Input terminal number (1–5)
x
0
1
2
0
1
2
5
6
7
8
0
1
2
3
4
5
6
*
INPUT SELECTION B INPUT 1
N
AUTO
VIDEO
COMPONENT
AUTO
VIDEO
INPUT 2
INPUT 5
I
I
N
N
P
P
2
5
COMPONENT
DIGITAL PC
ANALOG PC
DIGITAL AV
ANALOG AV
(Toggle)
AV MODE SELECTION
A
V
M
D
Although it can choose now, it is toggle operation in inside.
STANDARD
MOVIE
GAME
USER
DYNAMIC (Fixed)
DYNAMIC
VOLUME
V
H-POSITION H
O
P
L
M
S
Volume (0–60)
AV mode. (
ע 10) INPUT5: AV mode. (
ע 90) PC mode. (0–180)
AV mode. (
ע 20) INPUT5: AV mode. (
ע 50) PC mode. (0–100)
Only PC mode. (0–180)
Only PC mode. (0–40)
(Toggle) [AV]
Side Bar [AV]
S.Stretch [AV]
Zoom [AV]
O
*
*
*
*
POSITION
*
*
*
*
V-POSITION
V
P
O
S
*
*
*
*
*
*
*
*
*
CLOCK
PHASE
C
P
L
H
I
C
S
D
K
E
E
*
*
*
*
*
*
VIEWMODE
W
0
1
2
3
4
5
6
7
8
0
1
2
0
1
2
x
0
1
2
3
4
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
Although it can choose now, it is toggle operation in inside.
Stretch [AV]
Normal [PC]
Zoom [PC]
Stretch [PC]
Dot by Dot [PC]
(Toggle)
MUTE
M
A
U
C
T
E
V
On
Off
Dolby Virtual
D
(Toggle)
On
Off
(Toggle)
AUDIO SELECTION
SLEEP TIMER
A
C
F
H
T
A
O
M
OFF
OFF TIMER – 30 MIN.
OFF TIMER – 60 MIN.
OFF TIMER – 90 MIN.
OFF TIMER – 120 MIN.
The channel number of TV
(1–125)
CHANNEL
DIRECT
D
C
C
H
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–125ch is effective.
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
CHANNEL
(ANALOG)
DIRECT
D
D
A
C
2
2
P
U
*
*
*
*
*
*
*
_
(0101-9999)
(0-999)
CHANNEL
(DIGITAL)
D
C
2
L
*
*
*
_
(0-999)
D
D
C
C
A
C
C
H
H
C
1
1
0
1
*
*
*
*
*
*
*
*
(0-9999)
(0-6383)
The channel number of TV
ם 1 If it is not TV display, it will input-switch to TV. (same function as CHr) DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
CH UP
CH DOWN
U
D
S
P
W
L
x
x
0
1
2
x
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
The channel number of TV
מ 1 If it is not TV display, it will input-switch to TV. (same function as CHs) (Toggle)
AIR
Air/Cable SELECT
CC
AIR s CABLE s AIR
CABLE
(Toggle)
C
L
C
P
Toggle operation of a closed caption.
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• As long as that from which the parameter (g) in the table is a numerical value, it may write anything.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Item
Model: LC-45GD5U
LCD panel
Number of dots
45o Advanced Super View & BLACK TFT LCD
6,220,800 dots (1920 m 1080 m 3 dots)
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
TV
TV-standard (CCIR)
Function
Receiving VHF/UHF
Channel
CATV
1-125ch
Digital Terrestrial
Broadcast (8VSB)
2-69ch
Digital cable
(64/256 QAM)
1-135ch
Audio multiplex
BTSC System
Brightness
450 cd/m2
Backlight Life
Viewing angles
60,000 hours (at Backlight Standard position)
H : 170° V : 170°
Audio out
10W m 2
Terminals Rear
INPUT 1
INPUT 2
AV in, COMPONENT in
AV in, COMPONENT in
S-VIDEO in, AV in
INPUT 3
INPUT 4
HDMI in with HDCP
INPUT 5
Audio in, DVI-I in with HDCP
75 q Unbalance, F Type for VHF/UHF/CATV in m 1
75 q Unbalance, F Typem 2 (for Digital Air m 1/Digital Cable in m 1)
ANALOG ANTENNA
DIGITAL ANTENNA
MONITOR/REC OUT S-VIDEO out, AV out
G-LINK
Ø 3.5mm jack
DIGITAL AUDIO OUTPUT
i.LINK
CableCARD slot
Optical Digital audio output m 1 (PCM/Dolby Digital)
IEEE1394 m 2 with DTCP
68 pin PCMCIA m 1
Front Headphones
OSD language
Ø 3.5mm jack
English/French/Spanish
Power Requirement
Power Consumption
AC 120 V, 60 Hz
300 W
Weight
TV only
60.6 lbs./27.5 kg
69.4 lbs./31.5 kg
TV with speaker
TV with speaker and stand 78.3 lbs./35.5 kg
4921/64 m 2845/64 m 1131/32 (TV e stand e speaker)
439/64 m 2845/64 m 1131/32 (TV e stand)
4921/64 m 2525/32 m 431/64 (TVe speaker)
439/64 m 2525/32 m 431/64 (TV only)
Dimension
(W m H m D) (in inches)
Accessories
Operation manual (m1), Remote control unit (m1), AC cord (m1), “AAA” size
battery (m2), Cable clamp (m1), G-LINK cable (m1), Cable tie (m1), Speaker
Unit (m2)
Operating temperature
e32°F to e104°F (0°C to e40°C)
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensional drawings
Unit: inch/(mm)
2431/32 (677)
4921/64 (1253)
439/64 (1096)
411/64 (106) 431/64 (114)
3815/16 (989.1)
77/8 (200)
1131/32 (304)
HOW TO SET THE FACTORY PRESETS
Check that the power indicator is not on.
Remove the AC cord and switch off the power.
Press and hold down RESET at the same time as you re-insert the AC Cord into the outlet and switch on the TV.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Running the factory presetting operation also clears the secret number.
You can run the EZ Setup again by using the following steps.
1 Turn on the power of the TV.
2 Press MENU. (Make sure the menu screen displays.)
3 Press c/d to select “Setup”.
4 Press a/b to select “EZ Setup”.
5 Press ENTER.
NOTE
• If the secret number setting screen displays, you need to enter your secret number.
• If you forget your secret number, refer to HOW TO SET THE FACTORY PRESETS above.
The secret number is
.
NOTE
• As a precautionary measure, make a note of your secret number above, scissor it from this manual, and keep it in a
familiar place.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITEDTOTHE PERIOD(S) FROMTHE DATE OF PURCHASE SET FORTH BELOW.Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THISWARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS.YOU MAY ALSO HAVE OTHER RIGHTS WHICHVARY FROM
STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
LC-45GD5U Color Television
(Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Where to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in-home
service for this Product. The Servicer will come to your home
and if it is necessary to remove the Product, the Servicer will
reinstall it. Be sure to have Proof of Purchase available.
What to do to Obtain Service:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
88
Download from Www.Somanuals.com. All Manuals Search And Download.
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres
or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the
screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Parts & Labour (exceptions noted)
1 year
1 year
Audio Products
Camcorder
DVD Products
1 year
Projector
1 year (lamp 90 days)
LCD & Plasma Display TV
Microwave Oven
Television Products
VCR Products
1 year
1 year (magnetron component-4 additional years)
1 year (picture tube component-1 additional year)
1 year
1 year
Vacuum Cleaner
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
Revision 04/22/03
89
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sennheiser Video Game Headset DW Pro1 Pro2 User Manual
Shure Headphones SRH440 SRH240 User Manual
Shure Welding System PSM 600 User Manual
Soleus Air Fan MS 09 User Manual
Sony Camcorder 4 114 858 121 User Manual
Sony DVR VRD MC1 User Manual
Sony Network Card SNC RZ30P 2 User Manual
Sony Printer UP DR100 User Manual
Stovax Range RV40 User Manual
Sunbeam Hot Beverage Maker KE7350 User Manual