Sharp Flat Panel Television LC 26SB27UT User Manual

LC-26SB27UT  
LIQUID CRYSTAL TELEVISION  
TÉLÉVISEUR ACL  
TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO  
OPERATION MANUAL  
MODE D’EMPLOI  
MANUAL DE OPERACIÓN  
IMPORTANT  
IMPORTANT  
:
:
Please read this operation manual before starting operating the equipment.  
Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.  
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LC-26SB27UT  
LIQUID CRYSTAL TELEVISION  
ENGLISH  
OPERATION MANUAL  
IMPORTANT:  
Model No.:  
To aid reporting in case of loss or theft, please record the  
TV’s model and serial numbers in the space provided. The  
numbers are located at the rear of the TV.  
Serial No.:  
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.”  
• Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy  
efficiency.  
IMPORTANT INFORMATION  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO  
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
The lightning flash with arrow-head  
symbol, within an equilateral triangle,  
is intended to alert the user to the  
presence of uninsulated “dangerous  
voltage” within the product’s  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
enclosure that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
The exclamation point within a  
triangle is intended to alert the user  
to the presence of important  
operating and maintenance  
(servicing) instructions in the  
literature accompanying the product.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY  
INSERT.  
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly  
approved by the manufacturer could void the user’s authority to operate this equipment.  
CAUTION:  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other  
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded  
cables and connectors for connections.  
“Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of  
the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”  
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount  
of mercury. Disposal of these materials may be regulated due to environmental  
considerations. For disposal or recycling information, please contact your local  
DECLARATION OF CONFORMITY  
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-26SB27UT.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
RESPONSIBLE PARTY:  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495-1163  
TEL: 1-800-BE-SHARP  
INFORMATION:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
—Reorient or relocate the receiving antenna.  
—Increase the separation between the equipment and receiver.  
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
—Consult the dealer or an experienced radio/TV technician for help.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years  
of trouble-free operation of your product, please read the Important Safety Instructions carefully  
before using this product.  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if  
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,  
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following  
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of  
your Liquid Crystal Television, please read the following precautions carefully before using the product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
Additional Safety Information  
15) Power Sources—This product should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power  
company. For products intended to operate from battery power, or other sources, refer to the operating  
instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any  
kind on the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to restore the  
product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance - this indicates a need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform  
safety checks to determine that the product is in proper operating condition.  
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according  
to the method recommended by the manufacturer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or  
laundry tub; in a wet basement; or near a swimming pool; and the like.  
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can  
cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,  
tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall,  
be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.  
• Selecting the location — Select a place with no direct sunlight and good ventilation.  
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents  
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place  
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not  
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper  
ventilation is provided or the manufacturer’s instructions are followed.  
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or  
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.  
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.  
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that  
this does not affect the performance of your product.  
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the  
equipment due to lightning and power-line surges.  
• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.  
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna  
system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the  
National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
ANTENNA  
LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
EQUIPMENT  
POWER SERVICE GROUNDING ELECTRODE  
SYSTEM  
(NEC ART 250, PART H)  
NEC — NATIONAL ELECTRICAL CODE  
• To prevent fire, never place any type of candle or flames on the top or near the TV set.  
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.  
• Turn off the main power and unplug the AC cord from the wall outlet before handling.  
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface.  
• Use a soft damp cloth to gently wipe the panel when it is really dirty.  
(It may scratch the panel surface when wiped strongly.)  
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.  
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the  
panel surface.  
• Do not display a still picture for a long time, as this could cause an afterimage to remain.  
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal  
on the rear of the product.  
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display.  
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or electric  
shock. Exercise special caution when using the product around children.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
CHILD SAFETY  
It Makes A Difference How and Where You Use Your Flat Panel Display  
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:  
THE ISSUE  
• The home theater entertainment experience is a growing trend and larger flat panel  
displays are popular purchases. However, flat panel displays are not always supported on  
the proper stands or installed according to the manufacturer’s recommendations.  
• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,  
desks, speakers, chests or carts may fall over and cause injury.  
THIS MANUFACTURER CARES!  
• The consumer electronics industry is committed to making home entertainment enjoyable  
and safe.  
TUNE INTO SAFETY  
• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe  
installation and use of your flat panel display.  
• Carefully read and understand all enclosed instructions for proper use of this product.  
• Don’t allow children to climb on or play with furniture and television sets.  
• Don’t place flat panel displays on furniture that can easily be used as steps, such as a  
chest of drawers.  
• Remember that children can become excited while watching a program, especially on  
a “larger than life” flat panel display. Care should be taken to place or install the display  
where it cannot be pushed, pulled over, or knocked down.  
• Care should be taken to route all cords and cables connected to the flat panel display  
so that they cannot be pulled or grabbed by curious children.  
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL  
DISPLAY, ALWAYS:  
• Use a mount that has been recommended by the display manufacturer and/or listed by  
an independent laboratory (such as UL, CSA, ETL).  
• Follow all instructions supplied by the display and wall mount manufacturers.  
• If you have any doubts about your ability to safely install your flat panel display, contact  
your retailer about professional installation.  
• Make sure that the wall where you are mounting the display is appropriate. Some wall  
mounts are not designed to be mounted to walls with steel studs or old cinder block  
construction. If you are unsure, contact a professional installer.  
• A minimum of two people are required for installation. Flat panel displays can be heavy.  
Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.  
consumer electronics industry. More than 2,200 companies enjoy the benefits of CEA  
membership, including legislative advocacy, market research, technical training and  
education, industry promotion and the fostering of business and strategic relationships.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied accessories  
Make sure the following accessories are provided with the product.  
LC-26SB27UT  
Remote control unit “AA” size battery  
AC cord (X1)  
Page 7  
Cable Tie (X1)  
Page 7  
Stand unit (X1)  
Page 6  
Operation manual  
(X1)  
(X1)  
(X2)  
Page 8  
Page 8  
NOTE  
• Always use the AC cord supplied with the TV.  
To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are  
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD- CLOTH- 3) packs. Call 1-800-BE-SHARP  
QUICK REFERENCE  
Attaching the stand  
• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.  
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.  
CAUTION  
• Attach the stand in the correct direction.  
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.  
Confirm the 8 screws supplied with the TV.  
1
3
1
2
Insert the stand into the openings on the bottom of  
Short screws (X4)  
Long screws (X4)  
the TV.  
(used in step 2)  
(used in step 3)  
Insert and tighten the 4 screws into the 4 holes on the  
rear of the TV.  
Hex key  
Screw  
Remove the covering sheet of the stand.  
2
1
2
Attach the base to the post.  
Attach the base to the 4 screws into the 4 holes on  
the bottom of the base.  
Hex key  
Screw  
Soft cushion  
For protection, sheets  
are covering the product.  
Please remove these  
sheets before use.  
4
NOTE  
• To detach the stand, perform the step in reverse order.  
Ventilation & Cleaning Tips  
Keep your TV in a well ventilated area and make sure not to place it by a heat source or use near  
water. The TV is designed for AC use only and should be used with supplied AC cord.  
Clean the screen by spraying a soft lint free cloth with water to lightly moisten.  
Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method.  
Do not use liquid or aerosol cleaners.  
6
The screen is glass and can be scratched or broken when dropped or impacted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
QUICK INSTALLATION TIPS  
Attach your antenna to the back of the TV.  
1
How to turn on the TV for the first time.  
4
(See page 12.)  
A) Press POWER on TV.  
2
Connect the AC plug for the TV into the wall outlet.  
AC outlet  
• Place the TV close to the AC outlet, and keep the power  
plug within reach.  
NOTE  
POWER  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT  
TOUCH UN-INSULATED PARTS OF ANY CABLES  
WITH THE AC CORD CONNECTED.  
Secure cables and cords with the supplied cable tie so  
that they do not get caught when mounting the cover.  
3
B) POWER indicator on the front of the TV lights GREEN.  
Cable tie  
POWER indicator  
NOTE  
• Speaker cannot be detached from the TV.  
• TV angle cannot be adjusted.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.  
1 Open the battery cover.  
2 Insert two “AA” size batteries  
3 Close the battery cover.  
(supplied with the product).  
• Place the batteries with their terminals  
corresponding to the (+) and (–)  
indications in the battery compartment.  
NOTE  
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.  
• Do not mix batteries of different types. Different types of batteries have different characteristics.  
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical  
leakage in old batteries.  
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can  
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.  
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.  
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.  
17” (5 m)  
Remote control  
30°  
30°  
sensor  
IMPORTANT:  
The POWER indicator on the television should light GREEN indicating you have power to the TV.  
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the  
power on.  
IMPORTANT:  
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE  
INSTALLATION STEPS.  
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
IMPORTANT INFORMATION................................... 1  
DEAR SHARP CUSTOMER ..................................... 3  
IMPORTANT SAFETY INSTRUCTIONS.................. 3  
Supplied accessories ............................................. 6  
QUICK REFERENCE................................................ 6  
Attaching the stand.............................................. 6  
Contents................................................................... 9  
Part names............................................................. 10  
TV (Front) .......................................................... 10  
TV (Rear)........................................................... 10  
TV (Left)............................................................. 10  
Remote control unit............................................ 11  
Preparation ............................................................ 12  
Using the remote control unit............................. 12  
Cautions regarding remote control unit.............. 12  
Antennas ........................................................... 12  
Using external equipment .................................... 13  
Displaying an external equipment image ........... 13  
Connecting to External Equipment .................... 13  
Watching TV........................................................... 14  
Preparation........................................................ 14  
Turning on the power......................................... 14  
Auto Setup......................................................... 14  
Turning off the power......................................... 14  
Changing channels............................................ 14  
Auto Ch Memory................................................ 15  
Skipping stored channel .................................... 15  
Clear All............................................................. 15  
Display the channel information......................... 15  
Setting MTS/SAP stereo mode.......................... 15  
Selecting the digital audio language .................. 16  
View mode for 4:3 programs.............................. 16  
View mode for HD programs.............................. 16  
Labeling channels.............................................. 16  
Favorite channel setting..................................... 17  
Closed captions and digital closed captions...... 18  
Caption setup .................................................... 19  
Password setting for parental control................. 19  
How to enter the Lock menu.............................. 19  
To clear the all V-Chip settings .......................... 19  
Parental control (V-CHIP) .................................. 20  
TV Parental Guidelines (TV Guidelines) ........... 20  
Voluntary movie rating system (MPAA) ............. 20  
Canadian rating systems ................................... 21  
Canadian English ratings................................... 21  
Canadian French ratings ................................... 21  
How to temporarily release the V-Chip block..... 21  
Other convenience functions............................... 22  
Menu operation buttons..................................... 22  
Quick guide for MENU operation ....................... 22  
Connecting a PC (Personal computer) ............... 24  
Viewing an image from a PC.............................. 24  
Displaying an image from a PC.......................... 24  
PC compatibility chart........................................ 24  
Appendix................................................................ 25  
Troubleshooting................................................. 25  
Troubleshooting-Digital broadcasting................ 25  
Troubleshooting-PC mode................................. 25  
Specifications .................................................... 26  
Calling for Service................................................. 27  
LIMITED WARRANTY ............................................ 27  
Dimensional Drawings  
• The dimensional drawings for the TV set are shown  
on the inside back cover.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names  
TV (Front)  
TV (Left)  
Volume (VOL /+)/  
/buttons  
Remote control sensor  
POWER indicator  
Channel /button  
Channel /button  
MENU button  
INPUT/ENTER button  
POWER button  
TV (Rear)  
INPUT 6 terminals  
OUTPUT terminals  
INPUT 2/3 terminals  
ANT./CABLE in  
INPUT 1 terminals  
AC INPUT  
INPUT 4 terminal  
INPUT 5 terminal  
NOTE  
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names  
Remote control unit  
1
POWER: Switch the power on or enters standby mode.  
10  
(See page 14.)  
2
3
4
0–9: Set the channel. (See page 14.)  
• (DOT): (See page 14.)  
FREEZE: Set the still image. Press again to return to  
normal screen.  
11  
12  
1
• The still image automatically goes out after 30 minutes.  
5
SLEEP: Allows you to set a time when the TV  
automatically switches to standby. Each time you press  
this button, the remaining time setting switches by 10  
minutes up to 2 hours. This display will disappear after  
a few seconds, and the sleep timer automatically starts  
counting down.  
13  
2
3
• If you want to adjust the sleep timer again, you can  
press this button repeatedly then change the time  
setting.  
14  
15  
• Select “Off” by pressing SLEEP repeatedly to cancel  
the sleep timer.  
• The TV will enter the standby mode when the remaining  
time reaches zero.  
4
5
16  
17  
6
7
EXIT: Turn off the menu screen.  
CC: Display captions during closed-caption source.  
(See page 18.)  
6
18  
19  
8
9
AUDIO: Display the MTS setting menu. (See page 15.)  
FAVORITE CH  
20  
21  
7
8
9
A, B, C, D: Select 4 preset favorite channels in 4  
different categories. (See page 17 for details.)  
While watching, you can toggle the selected channels  
by pressing A, B, C and D.  
10 DISPLAY: Display the current channel (or input source)  
information on the screen. (See page 15.)  
11 INPUT: Select a TV input source. (See page 13.)  
12 MUTE: Mute the sound. “Mute” will be displayed on the  
screen, and the sound is silenced. The muting feature  
can be released by pressing this button again or one of  
the VOL +/– buttons.  
NOTE  
• Sound via the COAXIAL DIGITAL AUDIO OUTPUT  
terminal is not muted.  
• When using the remote control unit, point it at the TV. (See  
page 8.)  
13 VOL +/–: Set the volume.  
• To increase the volume, press VOL+.  
• To decrease the volume, press VOL–.  
• VOL+/– on the TV operates the same as VOL+/– on  
the remote control unit.  
There is a protective film covering the face of the remote  
control. Please remove this film before use.  
14 CH  
/
: Select the channel. (See page 14.)  
15 ENT: Jumps to a channel after selecting with the 0–9  
buttons.  
16 FLASHBACK: Press to switch to the previously tuned  
channel. Press again to switch back to the currently  
tuned channel.  
• This function will not work if no channel has been  
changed after the TV is turned on.  
17 MENU: Display the menu screen.  
18 ////ENTER: Select a desired item on the screen.  
19 RETURN: Return to the previous menu screen.  
20 VIEW MODE: Select the screen size. (See page 16.)  
21 AV MODE: Select an adjusted picture setting. (Sports,  
Standard, Movie, Memory.) (See page 23.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Using the remote control unit  
Use the remote control unit by pointing it towards the remote control sensor on  
the TV. Objects between the remote control unit and the remote control sensor  
may prevent proper operation.  
Cautions regarding remote control unit  
• Do not expose the remote control unit to shock.  
In addition, do not expose the remote control unit to liquids, and do not place in an area  
with high humidity.  
• Do not install or place the remote control unit under direct sunlight. The heat may cause  
deformation of the remote control unit.  
• The remote control unit may not work properly if the remote control sensor on the TV is  
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or  
the TV, or operate the remote control unit closer to the remote control sensor.  
Antennas  
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of  
connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an  
F-type connector, plug it into the antenna terminal at the rear of the TV set.  
1. A 75-ohm system is generally a round cable with F-type  
connector that can easily be attached to a terminal  
without tools (Commercially available).  
F-type connector should be  
fingertightened only.  
NOTICE  
When connecting the RF cable to the TV set, do not tighten  
F-type connector  
F-type connector with tools.  
If tools are used, it may cause damage to your TV set. (The  
breaking of internal circuit, etc.)  
75-ohm coaxial cable (round)  
2. A 300-ohm system is a flat “twin-lead” cable that can be  
attached to a 75-ohm terminal through a 300/75-ohm  
adapter (Commercially available).  
F-type connector  
300-ohm twin-lead cable (flat)  
75-ohm coaxial cable  
Connecting Antenna Cable  
Home Antenna  
terminal (75-ohm)  
Cable without a  
CATV converter  
Cable TV lead-In  
• Connect the antenna cable to the  
Coaxial cable  
(commercially available)  
TV using one of the methods in the  
① ② ③  
illustration as shown ( or ).  
,
,
VHF/UHF antenna  
Home Antenna  
terminal (75-ohm)  
75-ohm coaxial cable (round)  
Coaxial cable  
(commercially available)  
Combination VHF/  
UHF antenna  
or  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
UHF  
300/75-ohm adapter  
VHF  
(commercially available)  
ANTENNA ANTENNA  
Separate VHF/  
UHF antenna  
300-ohm  
twin-lead cable  
300-ohm twin-lead cable  
75-ohm coaxial cable  
Combiner  
(commercially  
available)  
IN OUT  
To TV antenna terminal  
or  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using external equipment  
You can connect many types of external equipment to your TV like a DVD player, VCR, Digital TV tuner, HDMI  
equipment, game console or camcorder.  
Displaying an external equipment image  
To view external source images, select the input  
source from “Source Selection” menu using 0–6 on  
the remote control.  
Source Selection  
0.TV  
1.Input1  
2.Input2  
3.Input3  
4.Input4  
5.Input5  
6.Input6  
[0-4]:Select  
• Each time INPUT is pressed, “Source Selection” item  
toggles.  
• You can also select “Source Selection” item by pressing  
/.  
CAUTION  
• To protect equipment, always turn off the TV before  
connecting a DVD player, VCR, Digital TV tuner, HDMI  
equipment, game console, camcorder or other external  
equipment.  
NOTE  
• Please read the relevant operation manual (DVD player,  
etc.) carefully before making connections.  
• Refer to your external equipment operation manual for the  
signal type.  
Connecting to External Equipment  
Connecting a DVD player, VCR, Digital TV tuner, HDMI equipment game console or camcorder.  
Terminal on external  
Terminal on the TV/DVD  
INPUT 1 or 2  
Cable  
equipment  
AV cable (commercially available)  
L
R
or  
VIDEO  
AUDIO  
INPUT 3  
Component video cable  
(commercially available)  
Y
L
P
B
P
R
COMPONENT  
AUDIO  
Audio cable  
R
(commercially available)  
S-VIDEO cable  
INPUT 1  
(commercially available)  
L
R
Audio cable  
S-VIDEO  
AUDIO  
(commercially available)  
INPUT 4 or 5  
HDMI-certified cable  
(commercially available)  
HDMI  
DIGITAL AUDIO  
OUTPUT  
Coaxial cable  
(commercially available)  
AUDIO OUTPUT  
Audio cable  
(commercially available)  
L
R
AUDIO  
NOTE  
• The S-VIDEO terminal takes priority over the video terminals.  
• When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.  
13  
• When using an HDMI-DVI conversion adapter/cable, use INPUT 4 and AUDIO terminal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Turning off the power  
Preparation  
Press POWER on the TV, or POWER on the remote  
Perform the following steps before you press POWER  
control.  
on the remote control unit.  
• The TV enters standby mode and the image on the screen  
disappears.  
1
2
3
Insert the batteries into the remote control unit.  
(See page 8.)  
• The POWER indicator on the TV changes to Red.  
Connect the antenna cable to the TV. (See page  
12.)  
Plug in the AC cord to the AC outlet. (See page 7.)  
NOTE  
• If you are not going to use this TV for a long period of time,  
be sure to remove the AC cord from the power outlet.  
• Weak electric power is still consumed even when POWER  
is turned off.  
Turning on the power  
Changing channels  
You can change channels in several ways.  
Method 1  
Press POWER on the TV, or POWER on the remote  
control.  
TV status indicator (POWER)  
ON  
Lighting (Green)  
Lighting (Red)  
Using CH  
/
on the remote control unit or on the  
TV.  
OFF/Standby  
NOTE  
• POWER indicator (Green): The TV is on. (“Please wait”  
will appear for a few seconds on the screen.)  
• If your cable-TV system includes analog and digital  
channels using the same channel number, your channel  
up function will scroll through the analog channel first,  
then the digital channel. Although it may appear as though  
the channel does not change, it actually moves from the  
analog to the digital channel in sequence.  
Auto Setup  
The Auto Setup menu appears the first time you  
turn on the TV, and assists you to select the menu  
language, specify the Air/Cable setting, and program  
your channels automatically.  
If you use channel-down, it will move in reverse, from the  
digital channel to the analog channel.  
Method 2  
IMPORTANT: Make sure that the antenna or cable TV  
Using remote control buttons 0–9, (DOT) to select  
channels for VHF/UHF/CATV/DIGITAL.  
system connection is made!  
The turn on the TV, press POWER (POWER indicator on  
the front of the unit changes green. It may take approx.  
10 seconds for a picture to appear on screen.).  
1
To select a 1 or 2-digit channel number (e. g., Channel 5):  
Press 5  
The “Auto Setup” function begins. Press /to select  
2
3
NOTE  
your desired language.  
• When selecting a 1-digit channel number, it is not  
necessary to press 0 before the number.  
Press /to select “Signal Type”, then press /to  
select “Cable” or “Air”.  
• When you enter 0–9 only, channel selection will be made  
if there is no operation within a few seconds.  
Air  
VHF/UHF channels  
Cable CABLE TV channels  
To select a 3-digit channel number (e. g., Channel 115):  
Press 1g1g5  
Press /to select “Automatic Search”, then press  
4
5
ENTER.  
To select a 4-digit channel number (e. g., Channel 22.1):  
Press 2g2g (DOT) g1  
The TV will begin memorizing all the channels available  
in your area.  
• It may take from 15 minutes to 30 minutes to complete  
memorizing digital cable channels.  
Depending on the reception condition, a BAR display  
may not advance for several minutes, please be  
patient.  
NOTE  
• When you enter 0–9 only, channel selection will be made  
if there is no operation within a few seconds.  
• If you press 0 by itself in “Air” reception, nothing will  
happen.  
NOTE  
• Complete the above steps within a few seconds.  
• When you enter 0–9 and • (DOT), channel selection will  
be made if there is no operation within a few seconds.  
• If you press EXIT in the process of “Auto Setup”, the Auto  
Setup stops and changes to the normal screen.  
• When you make a menu selection, your changes occur  
immediately.You do not have to press EXIT to see your  
changes.  
• When you are finished programming the menus, press  
EXIT.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Auto Ch Memory  
Display the channel information  
Auto Ch Memory makes the TV look for all channels  
Press DISPLAY to display the current channel (or  
viewable in the set area.  
input source) information on the screen.  
When the TV receives a digital signal, the digital information  
will appear for a few seconds.  
1
2
Press MENU and the MENU screen displays.  
Press /to select “Channel”, then press or ENTER.  
Press /to select “Auto Ch Memory”, then press or  
ENTER.  
• Channel number  
• Station name  
• Channel label (if preset) Broadcast program name  
• V-Chip rating  
• Sleep timer  
• Program guide  
• Resolution  
• Signal type  
• Audio language  
• Picture size  
3
4
5
Press /to select “Signal Type”, then press /to  
select “Cable” or “Air”.  
Press /to select “Automatic Search”, then press  
When the TV receives a analog signal, the analog  
information will appear.  
ENTER.  
The TV will begin memorizing all the channels available  
in your area.  
• Channel number • Channel label (if preset)  
• V-Chip rating  
• Sleep timer  
• Picture size  
• Signal type  
• It may take from 15 minutes to 30 minutes to complete  
memorizing digital cable channels.  
Depending on the reception condition, a BAR display  
may not advance for several minutes, please be  
patient.  
Audio information (Stereo, SAP or Mono)  
• Resolution  
Setting MTS/SAP stereo mode  
NOTE  
The TV has a feature that allows reception of sound  
other than the main audio for the program. This feature  
is called Multi-channel Television Sound (MTS).  
The TV with MTS can receive mono sound, stereo  
sound and Secondary Audio Programs (SAP). The  
SAP feature allows a TV station to broadcast other  
information, which could be audio in another language  
or something completely different like weather  
information.  
• Memorizing channels is best accomplished during evening  
“PRIMETIME” hours, as more stations are broadcasting  
digital signals. Memorizing channels can only be  
accomplished while a station is broadcasting a digital  
signal to set that channel into memory.  
• New digital channels may be added to your area  
periodically, it is recommended to perform the “Automatic  
Search” procedure regularly.  
Skipping stored channel  
You can set channel selection disabled using CH  
You can enjoy Hi-Fi stereo sound or SAP  
broadcasts where available.  
/
.
1
2
3
Press MENU and the MENU screen displays.  
Press /to select “Channel”, then press or ENTER.  
• Stereo broadcasts  
View programs like live sporting events, shows and  
concerts in dynamic stereo sound.  
Press /to select “Add/Delete”, then press or  
• SAP broadcasts  
ENTER.  
Receive TV broadcasts in either MAIN or SAP sound.  
MAIN sound: The normal program soundtrack (either in  
mono or stereo).  
4
Press /to select “Add/Delete”, then press or  
ENTER.  
SAP sound: Listen to a second language, supplementary  
commentary or other information. (SAP is mono sound.)  
5
6
7
Press /to select the channel that you want to skip.  
Press /to select “Delete” for selected channel.  
Press EXIT to return to the normal screen.  
If stereo sound is difficult to hear.  
• Obtain a clearer sound by manually switching to fixed  
mono-sound mode.  
NOTE  
• To add a digital channel you are watching:  
NOTE  
Select a channel you want to add. Then select “Adding  
Channel” in step 4, press or ENTER.  
• To release the skipping channel:  
Select “Add” in step 6.  
• MTS only operates while in TV mode.  
• MTS is available only when receiving analog broadcasting,  
not when receiving digital broadcasting.  
• When the TV receives a stereo or SAP broadcast, the  
word “Stereo” or “SAP” displays on-screen if you press  
DISPLAY.  
Clear All  
All channels are deleted from the channel memory.  
Changing MTS  
You can change MTS as shown below to match the  
television broadcast signal.  
1
2
3
Press MENU and the MENU screen displays.  
Press /to select “Channel”, then press or ENTER.  
1
2
3
In analog TV mode, press AUDIO and the “Audio”  
Press /to select “Add/Delete”, then press or  
menu screen displays. “MTS” will be highlighted.  
ENTER.  
Press AUDIO again or /to select “Stereo”,  
4
5
Press /to select “Clear All”, then press or ENTER.  
Press EXIT to return to the normal screen.  
“SAP” or “Mono”.  
Press EXIT to return to the normal screen.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Selecting the digital audio language  
View mode for HD programs  
When two or more audio languages are included in a  
Stretch mode is available for HD programs.  
Suitable for viewing wide-screen 1.78:1 aspect-ratio  
programs. When viewing 1.85:1 programs, the stretch  
mode will still show very thin black bands at the top  
and bottom of the screen.  
digital signal, you can select one of the audio languages.  
1
In digital TV mode, press AUDIO and the “Audio  
Language” menu screen displays.  
2
3
Press /or 0-6 to select your desired language.  
Press EXIT to return to the normal screen.  
Labeling channels  
To create channel labels  
NOTE  
• Digital audio is active only when receiving digital  
1
2
Select a channel you want to label.  
boardcasting, not when receiving analog boardcasting.  
Press MENU, then press /to select “Channel”,  
then press or ENTER.  
View mode for 4:3 programs  
Press /to select “Ch Label”, then press or  
ENTER. The Ch Label menu will appear.  
1
Press VIEW MODE.  
• The View mode menu displays.  
3
4
Press /to select a channel you want to label,  
• The menu lists the view mode options selectable for  
then press .  
the type of video signal currently being received.  
Ch Label  
2
Press 0–3 to select each view mode directly while  
the View mode menu is still on the screen.  
• Each time VIEW MODE is pressed, View Mode item  
toggles.  
Channel Number  
15.001  
>>  
Ch Label  
Label Clear  
• You can also select View Mode item by pressing /.  
• You can sequentially select a view mode that has its  
own aspect ratio.  
: Select  
: Adjust  
Press /repeatedly until the character you want  
• You can select “Dot by Dot” in PC input mode.  
appears in the first space.  
Side Bar:  
The characters rotation as follows:  
Suitable for viewing conventional  
4:3 programs in their normal  
format.  
, () @ / + =  
-
-
SPACE  
If the character which you desire appears, press  
ENTER. Repeat this step to enter the rest of the  
characters.  
S.Stretch (Smart stretch):  
Suitable for stretching 4:3  
programs to fill the screen.  
When you finish inputting the label name, press  
ENTER.  
5
6
Zoom:  
Press EXIT to return to the normal screen.  
Suitable for viewing wide-screen  
2.35:1 anamorphic DVDs in full  
screen.  
Repeat steps 1-5 for other channels. You can  
assign a label to each channel.  
To erase channel labels  
Stretch:  
1
Select a channel with a label which you want to  
This mode is useful for 1.78:1 DVDs.  
When viewing 1.85:1 DVDs,  
stretch mode will still show very  
thin black bands at the top and  
bottom of the screen.  
remove.  
2
Press MENU, then press /to select “Channel”,  
then press or ENTER.  
Press /to select “Ch Label”, then press or  
ENTER to display the Ch Label menu.  
Dot by Dot (for PC/HDMI mode  
only):  
3
Press /to select “Label Clear”. Press or  
Detects the resolution of the signal  
of the image and it will be shown  
on the screen with same amount of  
pixels.  
ENTER.  
4
5
Press EXIT to return to the normal screen.  
Repeat steps 1-4 to erase other channel labels.  
NOTE  
You can enter to the same menu screen from “Picture” menu.  
You cannot select “Side Bar” and “S.Stretch” when a 720p, 1080i  
or 1080p signal is being input.  
Some High Definition and/or Digital broadcasts may not allow you  
to change the picture size.  
In PC Mode, only the “Side Bar”, “Stretch” and “Dot by Dot”  
picture size features are available. In PC Mode (WXGA), only the  
“Stretch” and “Dot by Dot” picture size features are available.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Favorite channel setting  
This function allows you to program 4 favorite  
channels in 4 different categories. By setting the  
favorite channels in advance, you can select your  
favorite channels easily.  
Programming favorite channel  
1
Select the channel you want to register as a  
favorite channel.  
2
Press MENU, then press /to select “Channel”,  
then press or ENTER.  
Press /to select “Favorite Ch”, then press or  
ENTER. The Favorite Ch menu will appear.  
3
4
Press /to select “Set”, and then press or  
ENTER.  
Press /to select the position, and then press  
ENTER to register.  
5
6
Press EXIT to return to the normal screen.  
You can jump to the registered favorite channels  
directly using four FAVORITE CH.  
Deleting a favorite channel  
1
2
Repeat steps 1 to 2 in above procedure.  
Press /to select “Clear”, and then press or  
ENTER.  
3
4
Press /to select the registered favorite channel  
you want to release, and then press ENTER.  
Press EXIT to return to the normal screen.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
1
2
3
4
Tune the TV to the desired program.  
Press CC and the Closed Caption screen displays.  
Press or to setting the “CC Setting” to “On”.  
Closed captions and digital closed  
captions  
Press /to select “Analog Caption” or “Digital  
NOTE  
Caption”.  
• Closed Caption might not appear according to the  
condition of the signal from the broadcasting station.  
When you select “Analog Caption”, you can choose  
C1, C2, C3, C4, T1, T2, T3 and T4.  
Your TV is equipped with an internal Closed Caption  
decoder. It allows you to view conversations, narration  
and sound effects as subtitles on your TV. Closed  
Captions are available on some TV programs and on  
some VHS home video tapes at the discretion of the  
program provider.  
When you select “Digital Caption”, you can choose  
from CS1, CS2, CS3, CS4, CS5 and CS6.  
5
6
Press /to select the desired Closed Caption  
mode for both Digital and Analog Caption.  
Press /to select “CC Priority”, then press / ▶  
to select “Digital CC” or “Analog CC”.  
Digital Closed Caption service is a new caption  
service available only on digital TV programs (also  
at the discretion of the service provider). It is a more  
flexible system than the original Closed Caption  
system, because it allows a variety of caption sizes  
and font styles. When the Digital Closed Caption  
service is in use, it will be indicated by the appearance  
of a 3-letter abbreviation that also indicates the  
language of the Digital Closed Captions: ENG  
(English), SPA (Spanish), FRA (French) or other  
language codes.  
• Depending on the broadcast signal, some  
Analog Captions will function with a Digital  
broadcast signal. This step prevent that two kind  
of captions are overlapping.  
7
Press EXIT to return to the normal screen.  
NOTE  
• To turn the Closed Caption feature off, setting the “CC  
Setting” to “Off”.  
You can enter the Closed Caption menu from setup menu.  
Not all programs and VHS videotapes offer closed  
captions. Please look for the “ ” symbol to ensure  
that captions will be shown.  
In the Closed Caption system, there can be more than  
one caption service provided. Each is identified by  
its own number. The “C1” and “C2” services display  
subtitles of TV programs superimposed over the  
program’s picture. Generally, Closed Captions in  
English are transmitted on C1 and Closed Captions in  
other languages are transmitted on C2.  
In the Closed Caption system, the “Text1” or “Text2”  
services display text that is unrelated to the program  
being viewed (e.g., weather or news). These services  
are also superimposed over the program currently  
being viewed.  
NOTE  
• If the program or video you selected is not closed-captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, setting the “CC  
Setting” to “Off”.  
• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.  
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed  
Captioning, especially with live programs. This is because during live programs, captions are also entered live. These  
transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with  
Closed Captions.  
• Some Cable TV systems and copy protection systems may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with  
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Password setting for parental  
control  
Caption setup  
This function allows you to adjust the closed caption  
screen appearance to suit your preference.  
Allows you to use a password to protect certain  
settings from being accidentally changed.  
1
2
Press MENU and the MENU screen displays.  
IMPORTANT:  
Press /to select “Setup”, then press or  
Three conditions must be met to enable the V-Chip  
ENTER.  
3
Password is registered.  
V-Chip settings have been made.  
“V-Chip” is set to “On”.  
Press /to select “Closed Caption”, then press  
or ENTER.  
The Closed Caption menu displays.  
4
5
6
7
Press /to select “Digital CC Preset”, then press  
/to select “Custom”.  
Setting a password  
Press /to select “CC Advanced”, then press ▶  
1
2
Press MENU and the MENU screen displays.  
or ENTER.  
Press /to select “Lock”, then press or  
Press /to select the desired item, then press  
ENTER.  
/to change the setting.  
3
Select and enter a password (4 digits) using the  
number buttons (0–9), then press ENTER.  
• “ ” appears instead of the number.  
Press EXIT to return to the normal screen.  
Selectable parameters available in each  
adjustment item.  
4
Enter the same password again to confirm, then  
press ENTER, the password is now registered and  
the Lock menu will appear on the screen.  
Item  
Selectable parameter  
Text Size:  
Text Type:  
Auto, Small, Standard, Large  
Changing the password  
Allows you to change your current password.  
Auto, Style1, Style2, Style3, Style4, Style5,  
Style6, Style7  
1
2
Repeat steps 1 to 3 in Setting a password.  
Text Edge: Auto, None, Raised, Depressed, Uniform,  
Press /to select “Change Password”, then  
Left Shadow, Right Shadow  
press or ENTER.  
3
4
5
Enter a new password using 0–9, then press  
Text Color: Auto, Black, White, Red, Green, Blue,  
ENTER.  
Yellow, Magenta, Cyan  
Enter the same password again to confirm, then  
Text  
Auto, Solid, Transparent, Translucent,  
Flashing  
press ENTER.  
Opacity:  
The screen returns to Lock menu. Your new  
Background Auto, Black, White, Red, Green, Blue,  
Color: Yellow, Magenta, Cyan  
password has been set.  
Background Auto, Solid, Transparent, Translucent,  
NOTE  
Opacity:  
Flashing  
• As a precautionary measure, make a note of your  
password and keep it in a familiar place.  
• The “V-Chip Set (DTV)” will only be selectable when  
a new rating system can be downloaded via digital  
broadcasting in the U.S.  
NOTE  
• This feature is designed to customize Digital Captions  
only.  
• The “Auto” value depends on the broadcasting station.  
How to enter the Lock menu  
1
2
Press MENU and the MENU screen displays.  
Press /to select “Lock”, then press or  
ENTER.  
3
Input the 4-digit password by using 0–9, then press  
ENTER.  
The Lock menu displays.  
To clear the all V-Chip settings  
1
In the Lock menu, press /to select “V-Chip  
Clear”, then press or ENTER.  
2
Input the 4-digit password by using 0–9, then press  
ENTER. All your settings return to the factory  
settings.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Parental control (V-CHIP)  
V-CHIP might not function according to the condition of the signal from the broadcasting station.  
V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over  
broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing  
while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your  
TV.  
V-CHIP menu will not be selectable from the menu if you do not first configure your password.  
(See page 19 for password setting for parental control.)  
• The U.S. has two rating systems for viewing content: movie ratings and TV Parental Guidelines.  
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows  
from their children.  
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable  
TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.  
TV Parental Guidelines  
Content  
FANTASY  
VIOLENCE  
SEXUAL  
ADULT  
SEXUAL  
DIALOG  
TV RATING  
VIOLENCE  
SITUATIONS  
LANGUAGE  
TV-Y (All children)  
TV-Y7 (Directed to older children)  
TV-G (General audience)  
TV-PG (Parental Guidance suggested)  
TV-14 (Parents strongly cautioned)  
TV-MA (Mature audience only)  
T
T
T
T
X
X
X
T
T
T
X
X
X
T
T
T
X
X
X
T
T
T
X
X
Suggested  
age  
X
T: The content rating can be set, but this rating is not normally broadcast by TV stations.  
X: Content rating can be set.  
EXAMPLE  
• If you select “TV-G”, this will automatically block the higher ratings “TV-PG”, “TV-14” and “TV-MA”.  
Voluntary movie rating system (MPAA)  
MOVIE RATING  
Description  
G
General audiences. All ages admitted.  
PG  
PG-13  
Parental guidance suggested. Some material may not be suitable for children.  
Parents strongly cautioned. Some material may be inappropriate for children under 13.  
Age  
R
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).  
No one 17 and under admitted.  
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.  
NC-17  
X
EXAMPLE  
• If you select “PG-13”, this will automatically block the higher ratings “R”, “NC-17” and “X”.  
NOTE  
• Voluntary movie rating system only uses an age-based rating.  
TV Parental Guidelines  
(TV Guidelines)  
Voluntary movie rating system  
(MPAA)  
1
1
In Lock menu, press /to select “V-Chip”, then  
Repeat steps 1 and 2 in TV parental Guidelines  
press /to select “On” .  
(TV Guidelines).  
2
3
4
5
2
3
4
Press /to select “V-Chip Set”, then press or  
Press /to select “Movie Rating”, then press ▶  
ENTER.  
or ENTER.  
Press /to select “TV Rating”, then press or  
Press /to select the desired rating, then press  
ENTER.  
ENTER.  
Press ///to select the desired rating, then  
Press EXIT to return to the normal screen.  
press ENTER.  
Press EXIT to return to the normal screen.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Canadian rating systems  
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission  
(CRTC) policy on violence in television programming.  
• While violence is the most important content element to be rated, the structure developed takes into consideration other  
program content like language, nudity, sexuality and mature themes.  
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian  
French ratings.  
Canadian English ratings  
Rating  
Description  
Exempt: Includes news, sports, documentaries and other information programming; talk shows, music  
E
videos, and variety programming.  
Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that  
could threaten their sense of security and well-being.  
C
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve  
C8+  
G
conflict; nor encourage children to imitate dangerous acts which they may see on the screen.  
General: Considered acceptable for all age groups. Appropriate viewing for the entire family, contains very  
little violence, physical, verbal or emotional.  
Age  
Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under  
PG  
the age of 8) because it could contain controversial themes or issues.  
Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but  
it must be integral to the development of plot or character. Language usage could be profane and nudity  
present within the context of the theme.  
Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while  
related to the development of plot, character or themes, are intended for adult viewing.  
Could contain graphic language and portrayals of sex and nudity.  
14+  
18+  
Example: If you select “G”, this will automatically block the higher ratings “PG”, “14+” and “18+”.  
Canadian French ratings  
Rating  
Description  
E
Exempt programming.  
General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a  
G
humorous or unrealistic manner.  
General but inadvisable for young children: May be viewed by a wide public audience, but could contain  
8 ans+ scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations.  
Age  
Recommended for viewing with parent.  
Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for viewing  
13 ans+  
with parent.  
16 ans+ Over 16 years: Could contain frequent violent scenes and intense violence.  
18 ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.  
Example: If you select “8 ans+”, this will automatically block the higher ratings “13 ans+”, “16 ans+” and “18 ans+”.  
How to temporarily release the  
V-Chip block  
Canadian English ratings  
1
Repeat steps 1 and 2 in TV parental Guidelines  
The V-Chip block is working and censors a broadcast,  
(TV Guidelines).  
“This program has been blocked!” displays.  
2
Select “CAN ENG Rating”, then press or ENTER.  
Press /to select E, C, C8+, G, PG, 14+ or 18+,  
then press ENTER.  
1
2
Press MUTE while the V-Chip is working and then  
the password entering menu displays.  
Enter your 4-digit password with 0–9, then press  
3
Press EXIT to return to the normal screen.  
ENTER.  
At this time V-Chip block temporarily releases.  
Canadian French ratings  
Reactivating the temporarily released V-Chip block  
Method 1: Change to the other channel.  
1
Repeat steps 1 and 2 in TV parental Guidelines  
Method 2: Switch off the TV power.  
(TV Guidelines).  
NOTE  
2
Select “CAN FRE Rating”, then press or ENTER.  
Press /to select E ,G, 8 ans+, 13 ans+, 16 ans+  
or 18 ans+, then press ENTER.  
• Performing any of the two above will activate the V-Chip  
block.  
3
Press EXIT to return to the normal screen.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other convenience functions  
Menu operation buttons  
Quick guide for MENU operation  
Use the following buttons on the remote control to  
example : Select Language  
operate the menu.  
1
Press MENU and the MENU screen displays.  
Main Menu  
Picture  
>>  
Audio  
Channel  
Lock  
Setup  
ENTER : Set  
: Select  
2
Press /to select “Setup”, then press or  
ENTER.  
Press /to select “Language”.  
Setup  
Closed Caption  
>>  
Language  
English  
>>  
Video Label  
Auto Shut Off  
Reset  
Off  
>>  
: Select  
: Adjust  
3
4
Press /to select the desired language.  
...on the following pages the MENU can be called  
in the same way as here.  
Press EXIT to return to the normal screen.  
NOTE  
• Some menu items may not displayed depending on the  
selected input source.  
• If no buttons are pressed for more than approx. 60  
seconds, the menu screen will return to normal Monitor  
screen automatically.  
MENU:  
Press to open the menu screen.  
///: Press to select a desired item on the  
screen or adjust a selected item.  
ENTER: Press to go to the next step or complete  
the setting.  
RETURN: Press to return to the previous step.  
EXIT:  
Press to exit from the menu screen.  
All changed settings will be saved.  
: Adjust  
: Select  
ENTER : Set  
The lower part of the menu screen is an  
operational guide for the remote control.  
It will change in accordance with each menu  
setting screen.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other convenience functions  
Icon  
Picture  
Selected item  
Picture Setting  
Description  
You can adjust the picture quality to your preference.  
Brightness / Contrast /  
Sharpness / Color / Tint  
Color Temperature  
Backlight  
Sports  
Bluish (Cool) / Neutral (Standard) / Reddish (Warm)  
Backlight adjusts the screen brightness for improved picture clarity.  
AV Mode  
For a clear-cut image emphasizing high contrast, useful for sports  
viewing.  
Standard  
Movie  
For a highly defined image in a normal lighting.  
For a movie.  
Memory  
Allows the user to customize settings as desired.You can set the  
mode for each input source.  
View Mode  
Film Mode  
See page 16.  
On / Off  
A smoother motion may be obtained by setting the Film Mode to “On”  
when you view a DVD from the DVD player.  
PC Setting*  
Hor Position / Ver Position  
To adjust the horizontal / vertical position of the image on the PC  
Monitor screen. Each video standard will require a different value for  
this setting.  
(see page 24)  
Clock  
To minimize any vertical bars or stripes visible on the screen  
background.  
Phase  
This must be adjusted after the frequency has been set optimize  
picture quality.  
Auto Adjust  
On / Off  
To adjust the all PC settings automatically.  
DNR  
DNR (Digital Noise Reduction) can reduce the roughness of the  
picture.  
Bass / Treble / Balance  
MTS  
Surround  
You can adjust the sound quality to your preference.  
See page 15.  
Audio  
Stereo / SAP / Mono  
On/Off  
The dynamic presence and sound created offers a thoroughly  
enjoyable listening experience.  
Audio Language  
HDMI1 Audio  
When two or more audio languages are included in a digital signal,  
you can select one of the audio languages.  
When you connect the HDMI device to the TV, select this setting.  
HDMI  
DVI  
When you connect the DVI device to the TV with analog audio cords,  
select this setting.  
Speakers  
On  
Off  
Sound via speaker and AUDIO OUTPUT terminal are adjusted with  
VOL +/– on the remote control unit or VOL –/+ on the TV.  
Sound via the AUDIO OUTPUT terminal is adjusted with VOL  
+/– on the remote control unit or VOL –/+ on the TV.  
Sound via speaker is muted.  
Add/Delete  
DTV Signal  
Adding Channel / Add/Delete  
/ Clear All  
See page 15.  
Channel  
Select “DTV Signal”, then press or ENTER. The Digital-Signal  
strength screen will appear.  
If necessary, adjust the direction of the antenna to obtain the  
maximum signal strength.  
Auto Ch Memory  
Ch Label  
Signal Type / Automatic  
Search  
See page 15.  
See page 16.  
Channel Number / Ch Label /  
Label Clear  
Favorite Ch  
See page 17.  
See pages 19~21.  
Lock  
Closed Caption  
Language  
See page 18.  
Setup  
English / Français / Español  
You can choose from three different languages (English, French and  
Spanish) for the on-screen displays.  
Video Label  
Auto Shut Off  
Reset  
Let you set the input terminal displayed when using the “Source  
Selection” menu or channel display.  
Press /to select the specific input source which you want to change.  
Press /to select the new label for the selected input source.  
On / Off  
In case of “Auto Shut Off” feature is “On”, if a station being viewed stops  
broadcasting, the TV will automatically shut itself off after 15 minutes.  
If Auto Shut Off is “On” and the broadcast signal is weak, the TV may  
automatically shut itself off. If this happens, turn Auto Shut Off to “Off”.  
The Reset function returns your settings to the factory settings.  
NOTE  
* “PC Setting” is available only for PC INPUT (INPUT 6).  
* When you connect the PC via HDMI input, you can setting “Hor Position” and “Ver Position” only.  
* Whenever you change the PC display resolution settings and find that the characters of the PC input has rough edges or  
has some flickerings, please go to PC Setting and do an “Auto Adjust” to improve the display of the PC input.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a PC (Personal computer)  
Viewing an image from a PC  
Use the INPUT 6 (PC) terminals to connect a PC. (When you use HDMI cable, use the INPUT 4 (HDMI 1) terminal.)  
NOTE  
• The PC input terminals are DDC1/2B-compatible.  
• Refer to “PC compatibility chart” for a list of PC signals compatible with the System.  
• Make sure to select the same signal values for the output signal of a PC and the input signal of the TV set before  
connecting with the PC. (See page 23.)  
• Depending on the PC being used, images may not be shown without converting the output signals into external output.  
Please refer to your PC’s manuals regarding converting to external output.  
• You can also connect the PC with HDMI cable. If you use HDMI cable, you  
don’t have to connect the audio cord. If you use HDMI-to-DVI cable, please  
connect audio cord as same way as VGA cable.  
Connecting the RGB cable  
Connect the RGB cable making sure  
that it ts correctly into the terminal.  
Then, rmly secure the connectors by  
tightening the screws on both sides  
of the plug.  
To PC IN  
terminal  
To ANALOG RGB  
output terminal  
RGB cable  
(commercially available)  
3.5 mm stereo minijack cable  
PC  
(commercially available)  
To Audio output  
terminals  
To AUDIO PC/HDMI  
input terminal  
Signal names for 15-pin mini D-sub connecter  
PC compatibility chart  
Horizontal  
Frequency  
Vertical  
VESA  
5
4
3
2
1
PC  
Resolution  
720 x 400  
Frequency  
Standard  
10  
9
8
7
6
15  
14  
13  
12  
11  
31.5 kHz  
31.5 kHz  
37.9 kHz  
37.5 kHz  
35.1 kHz  
37.9 kHz  
48.1 kHz  
46.9 kHz  
48.4 kHz  
56.5 kHz  
60.0 kHz  
47.8 kHz  
47.7 kHz  
70 Hz  
60 Hz  
72 Hz  
75 Hz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
60 Hz  
60 Hz  
-
VGA  
640 x 480  
800 x 600  
1,024 x 768  
Pin No.  
Signal name  
Pin No.  
Signal name  
D-SUB_5  
R
G
B
GND (Ground)  
SVGA  
Not connected  
PC  
Not connected  
DGND (Ground)  
AGND (Ground)  
AGND (Ground)  
AGND (Ground)  
DDCD  
VGAHS  
VGAVS  
DDCC  
XGA  
1,280 x 768  
1,360 x 768  
WXGA  
Displaying an image from a PC  
To view an image from a PC, perform the following  
procedure.  
Select the Input 6 (PC) mode using INPUT on the remote  
control or the TV set. (See page 13.)  
Select the PC input signal.  
Adjust the “Picture” items if the PC image does not come  
in clearly. (See page 23.)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Problem  
Possible Solution  
• No power  
• Check if you pressed POWER on the TV,or on the remote control unit.  
(See page 14.)  
• Is the AC cord disconnected? (See page 7.)  
• Has the power been turned on? (See page 14.)  
• Unit cannot be operated.  
• External influences such as lightning, static electricity, may cause improper  
operation. In this case, operate the unit after first turning off the power of the TV or  
unplugging the AC cord and replugging it in after 1 or 2 minutes.  
• Remote control unit does not  
operate.  
• Are batteries inserted with polarity (+, –) aligned? (See page 8.)  
• Are batteries worn out? (Replace with new batteries.)  
• Are you using it under strong or fluorescent lighting?  
• Is a fluorescent light illuminated near the remote control sensor?  
• Picture is cut off/with sidebar  
screen.  
• Are screen mode adjustments such as view mode choose made correctly? (See  
page 16.)  
• Strange color, light color, or color • Adjust the picture tone. (See page 23.)  
misalignment  
• Is the room too bright? The picture may look dark in a room that is too bright.  
• Power is suddenly turned off.  
• Is the sleep timer set? (See page 11.)  
• Check the Auto Shut Off settings. (See page 23.)  
• The unit’s internal temperature has increased.  
Remove any objects blocking vent or clean.  
• No picture  
• Is connection to other components correct? (See page 13.)  
• Is correct input signal source selected after connection? (See page 13.)  
• Is the correct input selected? (See page 13.)  
• Is picture adjustment correct? (See page 23.)  
• No sound  
• Is the volume too low? (See page 11.)  
• Have you pressed MUTE on the remote control unit? (See page 11.)  
• The TV sometimes makes a  
cracking sound.  
• This is not a malfunction. This happens when the cabinet slightly expands and  
contracts according to change in temperature. This does not affect the TV’s  
performance.  
Troubleshooting-Digital broadcasting  
The example of an error  
Possible Solution  
message displayed on a screen  
• Digital channel signal strength is • Check the antenna cable. Check that the antenna is correctly setup.  
low  
• Digital channel is scrambled  
• Audio only  
• It is subscription channel. Contact the service provider.  
• The channel has audio contents only.  
Troubleshooting-PC mode  
Problem  
Possible Solution  
• There is no image.  
• Make sure the RGB cable is properly connected. (See page 24.)  
• Make sure the output signal of the PC and the input signal setting of the LCD TV set  
are matched.(See page 24.)  
• Some software prohibit video playback on an external display when playing back a  
video with a notebook PC. This is not attributable to a problem with the LCD TV set.  
• There is no sound.  
• The text is blurred.  
• Make sure the PC audio cable is properly connected. (See page 24.)  
• Check if the mute function activates, or if the volume is set to minimum. (See page  
11.)  
• Adjust “Clock” and “Phase” using the PC Setting menu. (See page 23.)  
• The image is not displayed in the • Adjust “Hor Position” and “Ver Position” using the PC Setting menu. (See page 23.)  
center of the screen.  
Cautions regarding use in high and low temperature environments  
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly  
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.  
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a  
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.  
Storage temperature: –4°F to +140°F (–20°C to +60°C)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Item  
Model: LC-26SB27UT  
LCD panel  
26” Class (26 Diagonal)  
Active Matrix (a-Si TFT LCD)  
Resolution  
1,049,088 pixels (1366 x 768)  
TV  
TV-standard (CCIR)  
American TV Standard ATSC/NTSC System  
VHF 2-13ch, UHF 14-69ch  
1-135ch (non-scrambled channel only.)  
Function  
Receiving VHF/UHF  
Channel  
CATV  
Digital Terrestrial 2-69ch  
Broadcast (8VSB)  
Digital Cable*1  
1-135ch (non-scrambled channel only.)  
(64/256 QAM)  
Audio multiplex  
BTSC System  
Audio out  
5.0W x 2  
Terminals Rear  
INPUT 1  
AV in, S-VIDEO in  
INPUT 2  
INPUT 3  
INPUT 4  
INPUT 5  
INPUT 6  
AV in  
COMPONENT in, Audio in (Share with INPUT 2)  
HDMI in with HDCP, Audio in  
HDMI in with HDCP  
15-pin mini D-sub female connector, Audio in (φ 3.5 mm jack)  
Coaxial Digital audio output x 1 (PCM/Dolby Digital)  
DIGITAL AUDIO  
OUTPUT  
ANT/CABLE  
75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV)  
and Digital (AIR/CABLE)  
OSD language  
Power Requirement  
Power Consumption  
Weight  
English/French/Spanish  
AC 120 V, 60 Hz  
67 W (0.7 W Standby with AC 120V)  
TV + stand  
TV only  
TV + stand  
TV only  
20.7 Ibs./9.4 kg  
17.4 Ibs./7.9 kg  
Dimension*2  
(W x H x D)  
26 / x 20 x 9 / inch  
1
9
32  
16  
1
13  
61  
32  
64  
64  
26 / x 18 / x 3 / inch  
Operating temperature  
+32°F to +104°F (0°C to +40°C)  
*1 Emergency alert messages via Cable are unreceivable.  
*2 The dimensional drawings are shown on the inside back cover.  
• Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal  
brightness and temperature at 77°F/25°C.  
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for  
product improvement without prior notice. The performance specification figures indicated are nominal values of production  
units. There may be some deviations from these values in individual units.  
CLEARING THE PASSWORD  
If you forget the password, clear the password using the following procedure.  
1
2
Press and hold both VOL – on the TV and press 0 on the remote  
control simultaneously for a few seconds until Lock menu appears on  
the screen.  
Now the old password was cleared. You can set the new password.  
NOTE  
The password is  
• As a precautionary measure, make a note of your  
.
password above, cut it from this manual, and keep it in a  
safe place.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calling for Service  
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or  
customer assistance, please call 1-800-BE-SHARP.  
LIMITED WARRANTY  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the  
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,  
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the  
purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has  
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This  
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely  
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product  
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may  
vary. Please contact 1-888-GO-SHARP for further information.  
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of  
purchase to the servicer, which proof must include the date of purchase.  
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or  
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND  
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR  
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE  
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF  
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE.  
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy  
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are  
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all  
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,  
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way  
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,  
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the  
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp  
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on  
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.  
Model Specific Section  
Your Product Model Number & Description:  
LC-26SB27UT Liquid Crystal Television  
(Be sure to have this information available when you need service for your  
Product.)  
Warranty Period for this Product:  
One (1) year partsand labor fromthedateofpurchase.
Additional Exclusions from  
Warranty Coverage (if any):  
Image Retention resulting from a fixed image being displayed for long  
periods of time is not covered by this Limited Warranty (see Operation  
Manual on how to prevent this).  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United States. To find the  
location of the nearest Sharp Authorized Servicer, please call Sharp toll free  
at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure  
to have proof of purchase available. If you ship the Product, be sure it is  
insured and packaged securely. Please use two persons to carry the Product,  
transport it in its original packaging, and ensure that the Product is covered  
to avoid scratches and damage. Sharp shall not be responsible for lost,  
stolen or misdirected mail or for damage to the product incurred during  
shipping.  
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp All in One Printer AR 407 User Manual
Shure Home Theater System 27A8733A User Manual
Singer Sewing Machine XL 1000 User Manual
Soehnle Scale GBF 9200 User Manual
Sony Headphones Qualia 010 User Manual
Sony Projector VPH D50QM User Manual
Sony VCR N71 User Manual
Speed Queen Washer 801529 User Manual
Spin Master Motorized Toy Car Gyro Force User Manual
Star Micronics Switch DP8340R User Manual