Quick Start Guide for BD-HP21H
Accessories
Remote control
unit
Two “AA” size
batteries
AC cord
AV cable
Operation
Manual
Quick start
guide
How to install the batteries
1
Hold in the tab on the
battery cover and pull
the cover towards the
direction of the arrow.
2
Load the two R-06 size batteries 3 Insert the smaller tab of
(“AA” size, UM/SUM-3). Place
batteries with their terminals
corresponding to the m
and n indications in battery
compartment.
the battery cover into the
opening 1, and press down
on the cover until it clicks in
place 2.
Connection
TV
To AC IN
terminal
To AC outlet
When connecting this player to a TV,
SHARP recommend using a HDMI
cable or AV cable (Supplied).
HDMI cable
(commercially available)
AV cable(supplied)
Note:
For HDMI output settings, refer to page 15 of the operation manual.
When connecting with a component video cable, refer to page 16 of the operation manual.
Turn on the player and TV
B (POWER)
After you have connected the AC cord to the unit, connect the AC cord
to the mains. Turn on your TV and switch to the appropriate AV input
(Refer to your TV’s operation manual). (This may be labeled HDMI/EXT/
AUX etc.)
Download from Www.Somanuals.com. All Manuals Search And Download.
|