Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
Before you start
1.
Load the two holders and the stand together,
and make sure they are secure and tie
2.
Put the LCD panel set into the stand, and
make sure they are secure and tie
3.
LCD monitor can be lay back 0˚ ~2˚ (positive
and negative 2˚).
English
2
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
Thank you for your purchase of our LCD product. To ensure safety operation of this product, Please read the following menu
carefully before using this product.
Unpacking
Our 19” LCD monitor shall be content with these following items. Make sure you get all these set ready, otherwise contact to
your dealer or store which you purchased it. At last, feel free to contact us.
19” TFT LCD Monitor
External Univ15 pin D-sub
Power Cord
(RGB Analog) input signal cable
ADAPTER TECH.
External Universal AC Adaptor
STD-1203
Audio connector :
stereo Phone Jack
(100-240V, 50/60Hz)
CD User’s manual
Quick Start Guide
*
(DPF Card Reader and TV module is optional)
Hardware Installation
Be carefully to your LCD monitor, it’s very exquisite but easy to broken. Turn off LCD’s and PC’s power before you set it up.
Follow our installation step by step.
Input
【1】PC In : This can be connected with the D-Sub 15 pin signal Cable.
【2】DVI port : This can be connected with the DVI signal Cable.
【3】PC Audio-In port : This can be connected to PC Line out signal Cable.
【4】DC port：This is for connecting the power cable.
*(select option)
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
Precaution
1.
2.
3.
4.
5.
Do not expose the monitor to direct sunlight or heat.
Do not spill liquid on the monitor.
Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of purchase.
Do not use your monitor when magnets or electronic products are operating nearby.
Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean, soft clothes
applied with mild solution.
6.
7.
Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor.
Don’t use your fingers to touch the LCD Screen, directly. Fingerprint that contains oil and may by difficult to clear.
Troubleshooting
Make sure that your monitor is properly installed if you have encountered any trouble using this product.
•
There is no picture on the screen.
Check:
1. Power saving mode. Press any key and move the mouse to deactivate the mode.
2. Signal cable connector pins. If there are bent or missing pins, consult your place of purchase.
˙ Characters look too dark or too light
Check:
1. Using OSD Menu to adjust the Brightness.
˙ When your monitor shall be adjusted?
Check:
1. If the resolution or refresh rate is being changed.
. The Text appears on the screen are unclear.
Check
1. Make sure the resolution or refresh rate match with the Display Mode.
Warning
1.
2.
3.
4.
5.
6.
7.
Make sure that the system power is turned off.
Plug the signal cable to the signal connector at the rear of PC.
Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to the adapter.
Connect the power cord to power source.
Turn on the computer and the monitor.
For the best quality of the performance, we suggest you to set resolution as page 8 (Display Mode).
The lock (on the stand) must be locking in while using it.
Cleaning Notice
1.
Unplug the power cord from the AC outlet before clean the product.
2.
Never, ever, using any kind of corrosiveness chemical dissolvent to clean the screen, it may hurt your screen
surface.
3.
4.
We suggest that using a clean camel hair brush or a soft, clean, lint-free cloth to wipe the screen.
Don’t give any pressure directly to the LCD
English
4
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
Monitor Adjusting
Menu control button
Auto Tune: Auto tune adjust.
OSD Menu/Enter: Press the button to OSD menu .
Select Up : Increase the option value in OSD menu.
Select Down: Increase the option value in OSD menu.
Volume<->: Decrease the volume value
Volume<+>:Increase the volume value.
Power: Turn the LCD power on and off.
OSD (On-Screen Display) Menu Mode
Contrast：
Brightness :
Adjust the brightness of the
display.
Adjust the difference
between light and dark
area.
Color Temp :
Adjust the temp of the pixel
color.
Gamma Correct :
Adjust the gamma Curve.
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
OSD (On-Screen Display) Menu Mode (Continue)
Red :
Adjust the pixel of red pixel.
Color Adjust :
Adjust the RGB color.
Green :
Adjust the pixel of green pixel.
Blue :
Adjust the pixel of blue pixel.
H. Position :
V. Position :
Adjust the horizontal
position of the display.
Adjust the vertical position
of the display.
Sharpness :
Phase :
Adjust the sharpness of
display.
Adjust the phase of PLL
clock.
Auto Adjust :
Clock :
Auto Tune.
Adjust the frequency of the
PLL colck.
Auto Color :
Gray Scale auto tune
English : English
Deutsch : German
Français : French
Language :
Select the display language
of the OSD.
Italiano : Italian
Español : Spanish
中 文(繁) : Traditional Chinese
中 文(简) : Simply Chinese
日 本 語 : Japanese
OSD H. Position :
Adjust the horizontal
position of the OSD.
OSD V. Position :
Adjust the vertical position
of OSD.
English
6
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
OSD (On-Screen Display) Menu Mode (Continue)
Translucent :
Adjust diaphaneity of the
OSD.
OSD Timer :
Adjust the timeout of OSD.
D-SUB : Analogy RGB
signal.
Signal Source :
Switch input signal source.
DVI : Digital RGB signal.
Mode Select :
Switch the display size in DOS
mode.
Reset :
Recall the default setting.
Volume :
Increase or decrease the
sound volume.
Exit :
Exit and saving the setting.
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
DISPLAY MODE
Incoming Display Mode
Resolution
640X350
640X480
640X480
720X400
800X600
800X600
1024X768
1024X768
1280X1024
1280X1024
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
70.100
31.475
31.469
37.500
31.469
37.879
46.875
48.363
60.023
63.981
79.976
59.940
75.000
70.087
60.317
75.000
60.004
75.029
60.020
75.024
1.
2.
3.
We offer you 10 available modes compatible with Windows.
If any interference occurs on your screen while you modulating your PC or OSD. It is normal.
To have Best quality present on the PC, remember to upgrade your video card Driver. We strongly recommend you
to choose a Mode listed in the table.
4.
5.
The other Modes may not be supported that are not list on the table above
You may use the power management on your computer. It’s good for last service life of the product.
Specification
LCD Panel
Type
19.0” TFT Active Matrix LCD Display
H:170° , V:170°
600 : 1 (Typical)
Viewing Angle
Contrast Ratio
Brightness
250 (Typical)
Response Time
Display Colors
Max Resolution
Pixel Pitch
(15+10) 25 ms
16.7M colors
1280X1024(SXGA)
0.294mm(H)x0.294mm(V)
Input Signals
RGB Analog
Video Level:0.7Vp-p(75Ω)
Sync TTL with 75Ω internal pull-up resistors
Frequency FH:30~79KHz
FV:56~75Hz
Video In*
Auto Detect NTSC/PAL interlaced video with input
format of Composite video(AV) and S-video
Support digital RGB signal with TMDS signaling type
NTSC or PAL- B /G, D/ K, I , L/ L’
Up to 1280X1024@75Hz(Non-interlaced)
D-sub 15-pins
DVI*
ANT*
Compatibility
Connector
PC
RGB Analog
DVI
DVI-D
Video In*
Audio
Power
S-Video, RCA jack*
Stereo Phone Jack, RCA-Jack(L/R)
12V/DC Power Jack
ANT*
RF Tuner PH Type terminal
DPF Card**
Voltage
CF/Micro-drive/SM/SD/MMC/MS/MS PRO
100-240V, 50/60Hz(universal) via external AC Adapter
Power
Consumption
Power saving mode
Active
Standby < 3Watt
< 48Watt Max
Internal Speaker
User Interface
2Wx2(Stereo)
LED Indicator
Active
Off
- Green
- Turn off
Standby - Orange
5°C~40°C
20% ~ 80% R.H.
Operating Condition
Temperature
Air Humidity
Physical
Dimensions
Net Weight
DDC
463mm(H) x 436mm(W) x 64mm(D)
6.6 Kg
DDC1/DDC2B Compliant
VESA DPMS, EPA Energy Star
Power Management
Regulation (Certifications)
CE, FCC, VCCI, BSMI, UL/CUL
*Video In and DVI functions are optional.
** DPF (Digital Photo Frame) is select option.
English
8
Download from Www.Somanuals.com. All Manuals Search And Download.
19.0 TFT Active Matrix LCD Panel User Manual
Dimensional Drawings
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|