Seiko Watch V072 User Guide

Cal. V072  
INSTRUCTIONS  
(P.  
3)  
BEDIENUNGSANLEITUNG  
INSTRUCTIONS  
ISTRUZIONI  
(S. 23)  
(P. 43)  
(P. 63)  
(P. 83)  
(P. 103)  
(123 )  
INSTRUCCIONES  
INSTRUÇÕES  
用法説明  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Page  
DISPLAY AND MODE CHANGE ..............................................................................  
TIME/CALENDAR SETTING .....................................................................................  
ALARM ....................................................................................................................  
5
6
9
STOPWATCH ........................................................................................................... 11  
ILLUMINATING LIGHT............................................................................................. 13  
NOTES ON USING THE WATCH ............................................................................. 14  
BATTERY CHANGE.................................................................................................. 16  
TO PRESERVE THE QUALITY OF YOUR WATCH................................................... 18  
SPECIFICATIONS..................................................................................................... 21  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAL. V072  
ANALOGUE TIME DISPLAY  
DIGITAL TIME AND CALENDAR  
G Calendar function: Month, date and day of the week.  
REGULAR ALARM  
STOPWATCH  
G Measures up to 60 minutes in 1/100 second increments.  
G Split time measurement is possible.  
ILLUMINATING LIGHT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
DISPLAY AND MODE CHANGE  
B
A
a
b
CROWN  
C
a: Normal position  
b: Extended position  
With each press, the mode in the digital display changes in the following order:  
A
TIME  
mode  
ALARM  
mode  
CALENDAR  
mode  
STOPWATCH  
mode  
G
G
G
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME/CALENDAR SETTING  
CALENDAR SETTING  
Press to show CALENDAR mode.  
A
G
Press and hold for 2 to 3 seconds to  
show CALENDAR SETTING display.  
B
G
B
Press repeatedly to select the digits  
(flashing) to be adjusted.  
B
Month  
Date  
G Press for 2 to  
A
3 seconds.  
C
CALENDAR  
mode  
Day  
G
Month  
Day  
Press to set the flashing digits.  
C
Date  
G
or  
Press to return to CALENDAR mode.  
B
A
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
DIGITAL TIME SETTING  
G Before setting the analogue time, be sure to set the digital time.  
Press to show TIME mode.  
A
G
Press and hold for 2 to 3 seconds to  
show TIME SETTING display.  
B
G
B
B
A
Press repeatedly to select the digits  
(flashing) to be adjusted.  
Seconds  
Minutes  
G Press for 2 to  
3 seconds.  
C
Hour  
TIME  
mode  
12-/24-hour indication  
G
Hour  
Seconds  
Press to set the flashing digits.  
C
Minutes  
G
or  
Press to return to TIME mode.  
B
A
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANALOGUE TIME SETTING  
G Before setting the analogue time, be sure to set the digital time. (See the previous section)  
Hour hand  
Second hand  
Minute hand  
CROWN  
Pull out when the second hand is at the  
12 o’clock position.  
G
G
G
Turn to set the hour and minute hands.  
G
Push back in to normal position when  
the second digits count “00” in the digi-  
tal time display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
ALARM  
G The alarm can be set to ring on a 24-hour basis.  
ALARM TIME SETTING  
Press to show ALARM mode.  
A
G
Press repeatedly to select the digits  
(flashing) to be adjusted.  
B
B
Hour  
Minutes  
ALARM mode  
G
A
Press to set the flashing digits.  
Press to return to ALARM mode.  
C
C
G
or  
B
A
Hour  
ALARM mode mark  
Minutes  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
G ALARM ENGAGEMENT/DISENGAGEMENT  
With each press in ALARM mode,  
the alarm is alternately engaged and  
disengaged.  
C
Alarm  
mark  
C
* At the designated time the alarm rings for 20  
seconds. To stop it manually, press any of the  
buttons.  
G TURNING ON/OFF OF THE HOURLY TIME SIGNAL  
and  
With each simultaneous press in  
CALENDAR or TIME mode, the  
hourly time signal is turned on  
and off alternately.  
B
C
B
C
Hourly time  
signal mark  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
STOPWATCH  
G The stopwatch measures up to 60 minutes in 1/100 second increments.  
Press to show STOPWATCH mode.  
A
B
A
C
Minutes  
1/100 seconds  
Seconds  
Standard measurement  
C
C
B
START  
STOP  
RESET  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accumulated elapsed time measurement  
C
START  
C
STOP  
C
C
STOP  
B
RESET  
RESTART  
* Restart and stop of the stopwatch can be repeated by pressing button C.  
Split time measurement  
C
START  
B
SPLIT  
B
C
STOP  
B
RESET  
SPLIT  
RELEASE  
* Measurement and release of split time can be repeated by pressing button B.  
Measurement of two competitors  
C
START  
B
C
B
B
RESET  
FINISH TIME  
OF 1ST  
2ND  
FINISH TIME  
OF 2ND  
COMPETITOR  
FINISHES  
COMPETITOR  
COMPETITOR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
ILLUMINATING LIGHT  
Press and hold in TIME or CALEN-  
DAR mode.  
C
* The light illuminates the digital display for easy  
viewing in the dark.  
C
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES ON USING THE WATCH  
TIME/CALENDAR SETTING  
[CALENDAR SETTING]  
G The calendar automatically adjusts for odd and even months except February of leap years.  
G The flashing digits move quickly if button C is kept pressed.  
G If the watch is left untouched in the CALENDAR SETTING display with the digits flashing, it will  
automatically return to the CALENDAR mode in 1 to 2 minutes.  
[DIGITAL TIME SETTING]  
G The flashing digits except the seconds and the 12-/24-hour indication move quickly if button C is kept  
pressed.  
G In setting the seconds, when the seconds read any number from “30” to “59” and button C is pressed,  
one minute is added and the seconds are reset to “00”.  
G Changeover between 12- and 24-hour indications is made alternately with each press of button C.  
G When setting the hour digits in the 12-hour indication, check that AM/PM is properly set. Only “PM”  
mark is displayed. For the AM setting, there is no indication.  
G If the watch is left untouched in the TIME SETTING display with the digits flashing, it will automatically  
return to the TIME mode in 1 to 2 minutes.  
[ANALOGUE TIME SETTING]  
G When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn  
it back to the exact minute.  
G When the crown is pulled out or pushed in for time setting, the minute hand may move slightly.  
However, this is not a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
ALARM  
[ALARM TIME SETTING]  
G When the time function is displayed in the 24-hour indication, the alarm is also displayed in the 24-hour  
indication.  
G The flashing digits move quickly if button C is kept pressed.  
G When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.  
G If the watch is left untouched in the ALARM SETTING display with the digits flashing, it will  
automatically return to the ALARM mode in 1 to 2 minutes.  
G The alarm can be tested by keeping buttons B and C pressed at the same time in the CALENDAR or  
TIME mode.  
STOPWATCH  
G With each press of button C, the light illuminates the digital display with a beep.  
G After measuring 60 minutes, the stopwatch will start counting again from “00'00"oo” as many times  
as necessary until it is stopped.  
G When measuring a long period of time, press button A to return the STOPWATCH mode to the  
CALENDAR or TIME mode after the stopwatch starts. This will prevent any possible malfunction.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BATTERY CHANGE  
The miniature battery which powers your watch should last approximately  
3
Years  
3 years. However, because the battery is inserted at the factory to check  
the function and performance of the watch, its actual life once in your  
possession may be less than the specified period. When the battery expires,  
be sure to replace it as soon as possible to prevent any malfunction. For  
battery replacement, we recommend that you contact an AUTHORIZED  
SEIKO DEALER and request SEIKO SR927W battery.  
* If the alarm is used more than once a day, the stopwatch more than once a day, and/  
or the illuminating light for more than one second a day, the battery life may be less  
than the specified period.  
G Necessary procedure after battery change  
After the battery is replaced with a new one, or in case an abnormal display (broken  
digits, etc.) appears in the digital display, follow the procedure below to reset the IC.  
Press buttons A, B and C at the same time.  
* All the segments of the digital display will light up, a beep will sound twice and then “January 1st,  
Sunday” will be displayed in the digital display.  
* Before using the watch, set the time/calendar and alarm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
WARNING  
G Do not remove the battery from the watch.  
G If it is necessary to take out the battery, keep it out of the reach of children. If  
a child swallows it, consult a doctor immediately.  
CAUTION  
G Never short-circuit, heat or otherwise tamper with the battery, and never  
expose it to fire. The battery may burst, become very hot or catch fire.  
G The battery is not rechargeable. Never attempt to recharge it, as this may cause  
battery leakage or damage to the battery.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO PRESERVE THE QUALITY OF YOUR WATCH  
G WATER RESISTANCE  
Condition  
Scuba  
diving**  
and  
saturation  
diving  
of use  
Accidental  
contact with  
water such  
as rain and  
splashes  
Swimming, Taking a bath  
and shallow  
yachting and  
Indication on  
case back  
diving  
taking a  
shower  
Degree  
of water  
resistance*  
Non-water  
resistant  
No  
Yes  
Yes  
No  
No  
No  
No  
No  
No  
No  
No  
No indication  
WATER  
RESISTANT  
3 bar  
5 bar  
WATER  
RESISTANT  
5 BAR  
Yes  
WATER  
RESISTANT  
10/15/20 BAR  
10/15/20 bar  
Yes  
Yes  
Yes  
No  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
G Non-water resistant  
• If the watch becomes wet, have it  
* Pressure in bar is a test pressure and  
should not be considered as  
corresponding to actual diving depth  
since swimming movement tends to  
increase the pressure at a given  
depth. Care should also be taken on  
diving into water.  
** We recommend that you wear a  
SEIKO Diver’s Watch for scuba  
diving.  
checked by an AUTHORIZED  
SEIKO DEALER or SERVICE  
CENTER.  
G Water resistant 5/10/15/20 bar  
• Do not operate the crown and  
buttons when the watch is wet or  
in water.  
If used in sea water, rinse the  
watch in fresh water and dry it  
completely.  
5
bar WR  
G TEMPERATURES  
• When taking a shower with a water  
resistant 5 bar watch, or taking a  
bath with a water resistant 10, 15 or 20 bar  
watch, be sure to observe the following:  
* Do not operate the crown or push the buttons  
when the watch is wet with soapy water or  
shampoo.  
* If the watch is left in warm water, a slight  
time loss or gain may be caused. This  
condition, however, will be corrected when  
the watch returns to normal temperature.  
10/15/20  
bar WR  
Your watch works with stable  
+50°C  
accuracy within a temperature  
range of 5°C and 35°C (41°F  
and 95°F).  
-5°C  
Temperatures over 50°C (122°F) or below  
–5°C (+23°F) may cause a slight time loss  
or gain or battery leakage or shorten the  
battery life.  
However, the above conditions will be  
corrected when the watch returns to normal  
temperature.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
G SHOCKS & VIBRATION  
G CARE OF CASE AND BRACELET  
Be careful not to drop your watch  
or hit it against hard surfaces.  
To prevent possible rusting of  
the case and bracelet, wipe them  
periodically with a soft dry cloth.  
G MAGNETISM  
G PERIODIC CHECK  
The analogue unit of your watch  
will be adversely affected by strong  
magnetism, though the digital unit  
will not be affected. Keep the  
It is recommended that the  
watch be checked once every 2  
to 3 years. Have your watch  
2 - 3  
Years  
N
S
checked by an AUTHORIZED  
SEIKO DEALER or SERVICE CENTER to  
ensure that the case, crown, buttons, gasket  
and crystal seal remain intact.  
watch away from close contact with magnetic  
objects.  
G CHEMICALS  
G PRECAUTION REGARDING  
Be careful not to expose the  
watch to solvents, mercury,  
cosmetic spray, detergents,  
CASE BACK PROTECTIVE FILM  
If your watch has a protective  
film and/or a sticker on the case  
back, be sure to peel them off  
before using your watch.  
adhesives or paints. Otherwise,  
the case, bracelet, etc. may become  
discolored, deteriorated or damaged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
G STATIC ELECTRICITY  
G LIQUID CRYSTAL PANEL  
The IC (Integrated Circuit) used  
The normal life expectancy for  
a liquid crystal panel is  
approximately 5 years. After  
that it may decrease in contrast,  
in your watch will be affected by  
static electricity which may disturb  
the display. Keep the watch away  
5 Years  
from close contact with objects such as TV becoming difficult to read. Please contact  
screens which emit strong static electricity.  
your AUTHORIZED SEIKO DEALER or  
SERVICE CENTER if you wish to have a  
new panel fitted (guaranteed one year).  
SPECIFICATIONS  
Frequency of crystal oscillator .................. 32,768 Hz (Hz = Hertz … Cycles per second)  
1
2
Loss/gain (monthly rate) ............................ ±30 seconds at normal temperature range (5° C ~ 35° C)  
(41° F ~ 95° F)  
3
4
Operational temperature range ................. –5° C ~ +50° C (23° F ~ 122° F)  
Display system  
[Analogue time display] ........................ Hour, minute and second hands  
[Digital display]  
CALENDAR mode ............................ Month, date and day of the week  
(Alarm mark and hourly time signal mark)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
TIME mode ....................................... Hour, minutes and seconds  
“PM” mark in the 12-hour indication  
(Alarm mark and hourly time signal mark)  
STOPWATCH mode ......................... Measures up to 60 minutes.  
(Alarm mark and hourly time signal mark)  
ALARM mode ................................... Hour and minutes  
Alarm mark, ALARM mode mark, and “PM” mark in the 12-  
hour indication  
5
6
7
8
Driving system .......................................... Step motor  
Digital display medium .............................. Nematic Liquid Crystal, FEM (Field Effect Mode)  
Battery ...................................................... SEIKO SR927W, 1 piece  
IC (Integrated Circuit) ................................ C-MOS-LSI, 1 piece  
* The specifications are subject to change without prior notice for product improvement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  

Ramsey Electronics Satellite Radio RRW1A User Guide
Rikaline GPS Receiver GPS 6030 User Guide
Russound Stereo Amplifier DPA 612 User Guide
Sakar Binoculars VIV CS 735 User Guide
Samsung Digital Camera WB650 User Guide
Samsung Refrigerator DA68 01453B User Guide
Samsung Security Camera PRO4831 User Guide
Samsung Washer Dryer J1055 User Guide
SanDisk Computer Drive PSP CRE 0507 11 User Guide
Sears Washer 134542000 User Guide