Multimedia Projector
MODEL PLV-Z3
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Features and Design
2
Video Input
24
Input Source Selection (Video, S-Video, Component1/2,HDMI)
Video System Selection
Image Level Selection
Image Level Adjustment
Screen Size Adjustment
24
26
27
28
30
Table of Contents
To the Owner
3
4
Safety Instructions
5
Computer Input
32
Air Circulation
Installing the Projector in Proper Position
Moving the Projector
6
6
6
Input Source Selection
32
33
34
35
37
38
40
Computer System Selection
Computer Adjustment (Auto)
Computer Adjustment (Manual)
Image Level Selection
Image Level Adjustment
Screen Size Adjustment
Compliance
7
Part Names and Functions
8
Front
Back
8
8
Setting
41
Bottom
8
Terminal
Top
9
Setting
41
10
11
12
12
Remote Control
Remote Control Operating Range
Remote Control Batteries Installation
Maintenance and Cleaning
45
Warning Indicator
45
46
48
49
49
49
50
51
Cleaning the RGB panels
Cleaning the Air Filter
Replacing the Air Filter
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Installation
13
Positioning the Projector
Adjustable Feet
Connecting the AC Power Cord
Moving the Lens
Connecting to Video Equipment (Video, S-Video)
Connecting to Video Equipment (Component)
Connecting to Video Equipment (HDMI)
Connecting to Video Equipment (RGB Scart)
Connecting to a Computer
13
13
14
15
16
16
17
17
18
Lamp Replace Counter
Appendix
52
Troubleshooting
Indicators and Projector Condition
Menu Tree
Compatible Computer Specifications
Technical Specifications
Dimensions
Configurations of Terminal
Optional Parts
52
53
54
56
57
58
59
59
Basic Operation
19
Turning On the Projector
Turning Off the Projector
Zoom Adjustment
Focus Adjustment
Keystone Adjustment
My Picture Function
No Show Function
On-Screen Menu
19
19
20
20
21
21
21
22
23
Menus
TRADEMARKS
● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
● Windows and PowerPoint are registered trademarks of Microsoft Corporation.
● Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its respective
corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To the Owner
Before operating this projector, read this manual thoroughly
and operate the projector properly.
Safety Precaution
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section in the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens. Do not stare directly into the lens as possible. Eye
damage could result. Be especially careful that children do
not stare directly into the beam.
– Install the projector in a proper position. If not, it may
result in a fire hazard.
– Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. Minimum clearance must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat build-
up can reduce the service life of your projector, and can
also be dangerous.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SIDE and TOP
REAR
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
50cm
1m
50cm
50cm
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the ventilation holes.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
– If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
CAUTION
Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Ne puet être utillisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection
of Electronic Computer/Data Processing Equipment
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
NL
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-
conditioning equipment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Air Circulation
Installing the Projector in Proper Position
Install the projector properly. Improper Installation may reduce
the lamp lifetime and cause a fire hazard.
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
20˚
Do not tilt the projector more than 20
CAUTION
degrees to either side.
20˚
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 1.5’(50cm) away from any
objects.
Do not point the projector down to
project an image.
– Do not touch a peripheral part of the exhaust vent, espe-
cially screws and metallic part. This area will become hot
while the projector is being used.
NO DOWNWARD
– Do not put anything on the cabinet. The materials put on
the cabinet will not only get damaged but also cause fire
hazard by heat.
Do not put the projector on either
side to project an image.
Cooling fans are provided to cool down the projector. This
projector monitors internal temperature and control the run-
ning speed of the cooling fans.
NO SIDEWARD
Moving the Projector
Exhaust Vent
(Hot air exhaust)
When moving the projector, close the front cover and retract
the adjustable feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put
it into a suitable case.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
– Do not drop or bump a projector, otherwise damages or
malfunctions may result.
– When carrying a projector, use a suitable carrying case.
– Do not transport a projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to a projector. To transport a projector through a
courier or transport service, consult your dealer for best
way.
Air Intake Vent
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Model Numbers
Trade Name
: PLV-Z3
: Sanyo
Responsible party
Address
: SANYO FISHER COMPANY
: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.
: (818)998-7322
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to
insert the plug into the outlet, contact your electrician.
GROUND
AC Power Cord for the United Kingdom :
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus
ASA
. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required,
ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from
the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ············ Earth
Blue ································· Neutral
Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING : THIS APPARATUS MUST BE EARTHED.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
qExhaust Vent
Front
CAUTION
q
w
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
wAir Intake Vent (The two arrows show air flow.)
eTop Controls and Indicators
rFront Cover
tInfrared Remote Receiver
yProjection Lens
uZoom Lever
iFocus Ring
oLens Shift Ring (Up/Down)
!Lens Shift Ring (Left/Right)
e r
ty u i
o !
Back
! !
!
!
!Power Cord Connector
!Main On/Off Switch
!Air Intake Vent
!Terminals and Connectors
Bottom
!
!Adjustable Feet
!Lamp Cover
!Air Intake Vent (back and bottom)
!Air Filter
! RGB Panel Cleaning Holes
G
!
!
!
!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Terminal
q
*
w
y
t
r
e
q COMPUTER
r COMPONENT 1 / 2
Connect the component video output to these jacks. (p16)
Connect computer output, or RGB Scart 21-pin video output to
this connector. (p17,18)
t
y
VIDEO
Connect the composite video output from video equipment to
this jack. (p16)
w SERVICE PORT
This jack is used to service this projector.
HDMI
Connect the HDMI from video equipment to this terminal.
(p17)
e S-VIDEO
Connect the S-Video output from video equipment to this jack.
(p16)
A built-in micro processor which controls this unit may occasionally
*
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Top
q
w e r
ON-OFF
POWER
WARNING
LAMP
REPLACE
MENU
INPUT
SELECT
t
y
u
i
q POWER ON–OFF button
t MENU button
Turns the projector on or off. (p19)
Opens or closes the On-Screen Menu. (p22)
y POINT (Upe/Downd/Left7/Right8) button
w
POWER indicator
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom mode. (p40)
Flashes red until the projector gets ready to be turned on. It
lights red when the projector is in the stand-by mode. It
remains green while the projector is under operation. When
the front cover is closed it lights orange.
u SELECT button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom mode. (p40)
e WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p45)
i INPUT button
Selects input source. (p24, 32)
r LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p49)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
q LIGHT button
Lights the buttons on the remote control for about 10 seconds.
Remote Control
w MENU button
Opens or closes the On-Screen Menu. (p22)
e POINT (UP/DOWN/LEFT/RIGHT) button
Selects an item or adjusts value in the On-Screen Menu. These are also
used to pan the image in the Digital zoom mode. (p40)
r SCREEN button
Selects a screen size. (p30, 31, 40)
LIGHT
u
i
q
w
RESET
t INPUT buttons
Selects input source. (p24, 32)
y KEYSTONE buttons
CANCEL
MENU
o
!
Corrects keystone distortion. (p21, 41)
u POWER ON-OFF button
Turns the projector on or off. (p19)
SELECT
i RESET button
Resets to the previous figure.
When selecting main menu, all the items will be reset. When
selecting sub-menu, the selected item will be reset. This button works
when selecting Image level adjustment, Computer adjustment
(Manual), Keystone and Digital zoom function.
e
r
SCREEN
!
!
IMAGE ADJ.
o CANCEL button
Goes back to the previous screen. When there is no previous screen to
go back, displaying screen will disappear.
VIDEO
S-VIDEO
DARK
U - 1
CLEAR
! SELECT button
Executes the item selected, or to expand or compress image in the
Digital zoom mode. (p40)
U - 2
U - 4
USER SETTING
! IMAGE ADJ. button
COMPO.1
C 1
t
y
Displays the On-Screen Menu of the Image Adjust Menu in a line and
adjusts image level. You can directly adjust an item. (p28, 29, 38,39)
U - 3
COMPO.2
C 2
! IMAGE buttons
!
!
Selects an Image Level.(p27, 37)
! AUTO PC button
HDMI
PC
Operates the Auto PC adjustment function. (p34)
LAMP MODE MY PICTURE
LAMP
! NO SHOW button
!
!
Turns the picture into black image. (p21)
! MY PICTURE button
Displays the captured image. (p21,42)
! LAMP button
Selects a lamp mode. (p29,39)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Remote Control Operating Range
Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum
operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector.
16.4’
(5 m)
60°
Remote control
Remote Control Batteries Installation
Remove the battery
compartment lid.
Slide the batteries
into compartment.
Replace the compartment lid.
1
2
3
Two AA size batteries
Pull up the lid
and remove it.
For correct polarity (+ and
–), be sure battery termi-
nals are in contact with
pins in compartment.
* When the batteries of the remote control are replaced, the remote
control code automatically returns to the initial code (Code 1)(p43).
To insure safe operation, please observe the following precautions :
● Use (2) AA, UM3 or LR06 type alkaline batteries.
● Replace two batteries at the same time.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture, or heat.
● Do not drop the remote control.
● If a battery has leaked on remote control, carefully wipe case clean and install new batteries.
● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Positioning the Projector
This projector is designed to project on a flat projection surface and can be focused from 3.9’(1.2m) - 20.0’(6.1m). Refer to
the figure and the table below for the screen size and the distance between the projector and the screen.
20.0' (6.1m)
15.1' (4.6m)
(Inch Diagonal)
200”
9.8' (3.0m)
Zoom (max)
150”
3.9' (1.2m)
100”
76”
Zoom (min)
116”
40”
(Center)
31”
Screen Size
(W x H) mm
16 : 9 aspect ratio
31”
40”
100”
150”
200”
686 x 386
3.9' (1.2m)
––-––
884 x 497
5.2' (1.6m)
3.9' (1.2m)
2209 x 1244
13.1' (4.0m)
9.8' (3.0m)
3314 x 1866
19.3' (5.9m)
15.1' (4.6m)
4419 x 2489
––-––
Zoom (min)
Zoom (max)
20.0' (6.1m)
NOTE
● The brightness in a room has a great influence on picture quality. It is
recommended to limit ambient lighting in order to provide the best
image.
● The values shown are approximate and may vary from the actual size.
Adjustable Feet
Projection angle can be adjusted up to 11.8 degrees with the adjustable feet.
Lift the front of the projector and pull the feet lock latches on
both sides of the projector.
1
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.
2
To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by menu operation. (p21, 41)
3
CAUTION
Tilt the projector within the adjustable range in order not to shorten
the life of the lamp. Proper angle should be taken. See page 6.
Feet Lock Latches
Adjustable Feet
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce risk of electrical
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power being supplied.
Connect the projector with all peripheral equipment before turning
the projector on. (See page 16-18 for connection.)
CAUTION
For safety, unplug AC power cord when the projector is not in
use.
When this projector is connected to the outlet with AC power
cord and the Main On/Off switch is on, it is in Stand-by mode
and consumes a little electric power. Turn the Main On/Off
switch off when the projector is not in use.
Connect AC power cord (supplied) to the projector.
The AC outlet must be near this equipment and must
be easily accessible.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use a projector.
Confirm an AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada For Continental Europe
For the U.K.
Ground
To power cord connec-
tor on your projector.
To the AC outlet.
(200 - 240 V AC)
To the AC outlet.
(120 V AC)
To the AC outlet.
(200 - 240 V AC)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Moving the Lens
The projection lens can be moved up, down, left, and right with the manual lens shift function. This function makes it easy
to provide a projected image where you want.
Turn the lens shift ring (left/right) left/right to move the lens leftward /
rightward.
Lens Shift Ring
(Left/Right)
Turn the lens shift ring (up/down) up/down to move the lens upward /
downward.
Lens Shift Ring
(Up/Down)
Lens Shift Up/Down
V
V
V
V
uppermost
downmost
Lens Shift Left/Right
1/2W
1/2W
W
W
leftmost
rightmost
NOTE
● The best image is generally obtained at the center of the lens shift.
● When using the lens shift upward or downward to the limit, the lens does
not move to the limit leftward or rightward. When using the lens shift
leftward or rightward to the limit, the lens does not move to the limit
upward or downward.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to Video Equipment (Video, S-Video)
Video, S-video
Use the supplied video cable or a s-video cable (not supplied).
Video Equipment
Composite
Video Output
S-VIDEO
Output
Video Cable
(RCA x 1)
S-video
Cable
VIDEO
S-VIDEO
COMPUTER
COMPONENT
2
1
HDMI
Connecting to Video Equipment (Component)
Component
Use a component cable (option).
Video Equipment
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component
Cable
(RCA x 3)
Component
COMPUTER
COMPOONENT
NOTE
1
2
● See page 59 for ordering optional cables.
HDMI
NOTE
When connecting the cable, the power cords of both the
projector and the external equipment should be disconnected
from AC outlet.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to Video Equipment (HDMI)
HDMI
Use a HDMI cable (option) for HDMI.
Video Equipment
HDMI Video
Output
HDMI
Cable
HDMI
COMPUTER
COMPONENT
2
1
HDMI
Connecting to Video Equipment (RGB Scart)
RGB Scart
Video Equipment
Use a Scart-VGA cable (option).
RGB Scart
21-pin Output
Scart-VGA Cable
COMPUTER
COMPUTER
COMPONENT
2
1
HDMI
NOTE
● See page 59 for ordering optional cables.
NOTE
When connecting the cable, the power cords of both the
projector and the external equipment should be disconnected
from AC outlet.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to a Computer
Computer (Analog)
IBM-compatible or Macintosh computer
Use a VGA cable (option) or a DVI-VGA cable (commercially available).
Monitor Out
DVI-VGA
Cable
VGA Cable
COMPUTER
COMPUTER
COMPONENT
1
2
HDMI
NOTE
● See page 59 for ordering optional cables.
NOTE
When connecting the cable, the power cords of both the
projector and the external equipment should be disconnected
from AC outlet.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning On the Projector
Complete peripheral connections (with a computer, VCR, etc.)
before turning on the projector.
1
2
Connect the projector's AC power cord into an AC outlet and
open the front cover. Turn the Main On / Off switch on, and the
POWER indicator flashes red in a moment and turns on red. (If
the front cover is being closed, the POWER indicator light
orange.)
Open the front cover.
Main On/Off switch
Press the POWER ON-OFF button on the top control or on the
remote control. The POWER indicator turns green, and the
cooling fans start to operate. The preparation display appears on
the screen and the count down starts. (A captured image can
be used as the preparation display. See “Capture” on page 42.)
3
4
OFF
ON
Selected Input Source and Lamp Mode
After the count-down, the input source that was selected last
and the Lamp mode status icon appear on the screen.
Lamp mode
(See page 29, 39 for Lamp mode.)
Turning Off the Projector
Press the POWER ON-OFF button on the top control or on the
remote control, and a message "Power off?" appears on the
screen. The message is not displayed and the projector is
turned off when the Power off confirmation function is off. (See
the Setting Menu on page 43.)
1
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator starts to flash red, and it
continues while the cooling fans are operating (for about 60
seconds).
2
The message disappears after 4 seconds.
When the projector has cooled down enough to be turned on
again, the POWER indicator lights red. Then you can turn the
Main On/Off switch off and disconnect the AC power cord.
3
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE POWER
INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT
IN SHORTENING LAMP LIFE.
NOTE
● When the front cover is closed during operation, the projector is
automatically turned off in 5 seconds for safety. Be sure to turn off the
projector by pressing the POWER ON-OFF button on the top control or on
the remote control after use.
● The projector cannot be turned on during the cooling period with the
POWER indicator flashing red. You can turn it on again after the POWER
indicator lights red.
● Do not use the projector for more than 24 hours continuously. Turn off the
projector at least once in 24 hours and give it a rest. Continuous use may
result in shortening the lamp lifetime.
● This projector monitors internal temperature and automatically controls the
running speed of the cooling fans.
● If the WARNING indicator flashes or lights red, see “Warning Indicator” on
page 45.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Zoom Adjustment
Move the Zoom Lever to zoom in and out.
Zoom Lever
Focus Adjustment
Rotate the Focus Ring to adjust the projected picture focus.
Focus Ring
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Keystone Adjustment
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
Press the KEYSTONE ▲/▼ button on the remote control or
select the Keystone in the Setting Menu (p41). The Keystone
dialog box appears.
1
Correct keystone distortion by pressing the KEYSTONE ▲/▼
button or the Point Up/Down button. Press the KEYSTONE ▲
button or the Point Up button to reduce the upper part of image,
and press the KEYSTONE ▼ button or the Point Down button to
reduce the lower part.
2
• The arrows are white when there is no correction.
• The arrow disappears at the maximum correction.
• The direction of the arrow being corrected turns
purple.
Reduce the upper width
with the KEYSTONE ▲
button or the Point Up
button.
Reduce the lower width
with the KEYSTONE ▼
button or the Point Down
button.
My Picture Function
Press the MY PICTURE (MY-P) button on the remote control to
display a captured image. To restore to normal, press the MY
PICTURE (MY-P) button again or press any other button.
No Show Function
Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button.
The message disappears after 4 seconds.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
On-Screen Menu
You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
Remote Control
LL
LIGHT
RESET
MENU button
CANCEL
MENU
POINT button
Press the MENU button on the top control or on the remote
control to display the On-Screen Menu (Main Menu).
1
SELECT
SELECT button
Select a menu from the main menu by pressing the Point
Up/Down button, and press the Point Right button to enter
the sub-menu. (The selected icon turns yellow.)
SCREEN
2
Top Control
Select an item by pressing the Point Up/Down button, and
activate the item that you have selected with the
3
LAMP
REPLACE
or
(SELECT),
(Point Left),
(Point Right) button.
When using the top control, press the MENU button to close
the On-Screen Menu.
4
MENU
INPUT
SELECT
POINT button
When using the remote control, both main menu and sub-
menu can be closed by pressing the MENU button. Pressing
the CANCEL button once, then you will go back to the
previous screen. Or press CANCEL button twice, the On-
Screen Menu will be closed.
SELECT button
MENU button
On-Screen Menu (Main Menu)
Point
Right
button
On-Screen Menu (Sub-Menu)
Item
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Menus
VIDEO MENUS
Input Menu: selects input source. (p24-25)
AV System Menu: selects video system from AUTO, PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N, 1080i,
1035i, 720p, 575p, 480p, 575i, 480i. (p26)
Image Select Menu: selects image level from Creative cinema, Pure cinema, Natural, Video, Dynamic,
Powerful, Graphic, User Image 1 ~ 4. (p27)
Image Adjust Menu: adjusts Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/B), Sharpness,
Gamma, Progressive, Film, Lamp mode, Advanced menu, Reset, Store. (p28, 29)
Screen Menu: sets the screen size from Full, Full through, Zoom, Caption in 1, Caption in 2, Normal, Normal
through, Natural wide 1, Natural wide 2. (p30,31)
Setting Menu: changes various settings; Language, Keystone, Blue back, Display, Background color, Menu
position, Advanced menu, Logo, Capture, Mounting, Rear, Power management, Power off
confirmation, Remote control, Lamp counter reset, Factory default, Cleaning, Panel adjustment.
(p41-44)
COMPUTER MENUS
Input Menu: selects input source. (p32)
PC System Menu: selects computer system. (p33)
PC Adjust Menu: selects Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp,
Display area, Display area H, Display area V, Reset, Mode free, Store. (p34-36)
Image Select Menu: selects image level from Creative cinema, Pure cinema, Natural, Video, Dynamic,
Powerful, Graphic, User Image 1 ~ 4. (p37)
Image Adjust Menu: adjusts Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness, Gamma,
Lamp mode, Advanced menu, Reset, Store. (p38,39)
Screen Menu: sets the size from Normal, Full, True, Digital zoom. (p40)
Setting Menu: changes various settings; Language, Keystone, Blue back, Display, Background color, Menu
position, Advanced menu, Logo, Capture, Mounting, Rear, Power management, Power off
confirmation, Remote control, Lamp counter reset, Factory default, Cleaning, Panel
adjustment. (p41-44)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Input Source Selection (Video, S-Video, Component1/2, HDMI)
Direct Operation
Choose Input source by pressing the INPUT button on the top control
or INPUT buttons on the remote control.
Top Control
Remote Control
VIDEO
DARK
U - 1
CLEAR
INPUT
S-VIDEO
U - 2
U - 4
SELECT
USER SETTING
COMPO.1
C 1
U - 3
COMPO.2
C 2
INPUT buttons
HDMI
PC
LAMP MODE MY PICTURE
LAMP
INPUT buttons
Remote Control
Press the VIDEO, S-VIDEO, COMPO.1 COMPO.2 or HDMI button on
the remote control according to video input .
SELECT
SCREEN
VIDEO
When video input signal is connected to the VIDEO jack,
select Video.
IMAGE ADJ.
S-VIDEO
When video input signal is connected to the S-VIDEO
jack, select S-video.
VIDEO
S-VIDEO
DARK
U - 1
CLEAR
U - 2
U - 4
USER SETTING
COMPO.
1/2
When video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select COMPO.
COMPO.1
C 1
U - 3
COMPO.2
C 2
HDMI
When video input signal is connected to the HDMI termi-
nal, select HDMI.
HDMI
PC
LAMP MODE MY PICTURE
LAMP
INPUT buttons: VIDEO / S-VIDEO / COMPO.1 /
COMPO. 2 /HDMI
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Menu Operation
Select the Input Source with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Input Source
1
2
Select Input source with the Point Up/Down button and then
press SELECT button.
When video input signal is connected to the VIDEO jack,
select Video.
Video
When video input signal is connected to the S-VIDEO
jack, select S-video.
S-Video
COMPONENT When video input signal is connected to the Y-Pb/Cb-
1 / 2
Pr/Cr jacks, select Component 1 / 2.
HDMI
When video input signal is connected to the HDMI termi-
nal, select HDMI.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Video System Selection
Select the AV System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
AV System Menu (Video or S-Video)
1
2
Choose the system that you want to select with the Point
Up/Down button and then press the SELECT button.
Video or S-Video
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
AV System Menu (Component)
Component
Auto
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
Component Video Signal Format
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
AV System Menu (HDMI)
HDMI
Selected system
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
If the output signal of the video equipment and the input signal of the
projector do not match, you might not get the image with the best
quality.
If the black part of the picture appears unclear (too dark or too light),
try to select the input signal with "HDMI setup" in setting menu on
page 43.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Image Level Selection
Direct Operation
Remote Control
Select an image level among Creative cinema, Pure cinema, Natural,
Video, Dynamic, Powerful, Graphic, User Image 1 ~ 4 by pressing the
IMAGE buttons (CLEAR, DARK, and U-1-4 buttons) on the remote
control. Each time you press the DARK button, Creative cinema, Pure
cinema, Natural or Video can be selected. These levels are suitable
for a dark room. Also, each time you press the CLEAR button,
Dynamic, Powerful or Graphic can be selected. These levels are
suitable for a bright room.
CANCEL
MENU
SELECT
SCREEN
IMAGE ADJ.
VIDEO
S-VIDEO
Menu Operation
DARK
U - 1
CLEAR
Select the Image Select Menu with the Point Up/Down button,
U - 2
U - 4
1
USER SETTING
COMPO.1
C 1
and then press the Point Right button to enter the sub-menu.
U - 3
COMPO.2
C 2
Choose the level that you want to select with the Point
Up/Down button and then press the SELECT button.
2
HDMI
IMAGE buttons
Creative cinema
To enjoy contrasting 3D images in a dark room.
Pure cinema
To enjoy images with quiet tone of colors without excess gradation in
a dark room.
Image Select Menu
Natural
To enjoy faithfully reproducted images without any control by the
projector. Suitable for a dark room.
Video
To enjoy sports or dramas from TV with contrasting clear images .
Suitable for a dark room.
This arrow indi-
cates that there are
other items. Select
this item and press
the Point Down
button to go to the
next item.
Dynamic
To enjoy contrasting images in a bright room.
Powerful
To enjoy more contrasting powerful images in a bright room.
Graphic
To enjoy graphic images such as game or PC screen in a bright room.
User image 1~4
User preset images in the Image Adjust Menu (p28, 29)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Image Level Adjustment
Select the Image Adjust Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
Image Adjust Menu
1
2
Select an item with the Point Up/Down button and press the
Point Left/Right button to adjust the item.
Contrast
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast. (From -31 to +31)
Brightness
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter. (From -31 to +31)
Color
The level being selected
Press the Point Left button to lighten color and the Point Right button
to deepen color. (From -31 to +31)
Tint
Press the Point Left/Right button to obtain proper color. (From -31 to
+31)
Color temp.
Press the Point Left/Right button for Color temperature level that you
want to select. (High, Mid, Low1, Low2, Low3)
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
White balance (Red)
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone. (From -31 to +31)
White balance (Green)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone. (From -31 to +31)
Press the SELECT button or
Point Up/Down button to
adjust the next item.
Press the MENU button to
return to the previous On-
Screen Menu and store the
adjusted value.
White balance (Blue)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone. (From -31 to +31)
Sharpness
Go on to the next page...
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From -7 to +7)
Gamma
Direct Operation with Remote control
Press the Point Left/Right button to obtain better balance of contrast.
(From -7 to +7)
You can adjust the items in the Image Level
Adjustment menu with pressing the IMAGE ADJ.
button on the remote control. Press Point
Left/Right button to adjust each item. Press
Up/Down button to get to the next item.
NOTE
● Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or
PAL-N except for 575i.
CANCEL
MENU
● Color and Tint cannot be selected when the input source is HDMI.
● After adjusting any of the White balance Red, Green or Blue, the Color
temp. display will change to "User".
SELECT
SCREEN
IMAGE ADJ.
IMAGE ADJ. button
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
This arrow indicates that there
Progressive
are previous items. Select this
item and press the Point Up
button to go to the previous
item.
Interlace video signal can be converted to a progressive signal.
Off ···· Not activated.
L1 ···· Select “L1” for an active picture.
L2 ···· Select “L2” for a still picture.
Film
When this function is on, it detects proper interleaving of 3-2 and 2-2
pull down for film-base sources and produces a suitable image for the
input source. (This function is available only when selecting L1 or L2
on Progressive for NTSC(480i), PAL, SECAM(575i).)
Lamp mode
This function allows you to change brightness of the screen.
Bright mode . . . . . . . . . Normal brightness
Press the Point Right button at
this icon to store the value.
React image mode 1 . . The controlled brightness according with
input signal
React image mode 2 . .Less bright but quieter than React image
mode 1.
Theater black mode . . .Lowers brightness and reduces the lamp
power consumption.
The Image Level Menu will
appear. Choose one of 4
image levels with the Point
Up/Down button and press the
SELECT button. A confirma-
tion box will appear and select
[Yes].
Advanced menu
This function can be selected only when Advanced menu in the
Setting is On . You can adjust following items through this function.
Iris
. . . . . . . . . . . . . . .Press the Point Left button to adjust Iris.It
works only to stop down from zero.
Gain R/G/B . . . . . . . . . . . .Adjusts red, green and blue to select
contrast of colors you like.
Offset R/G/B . . . . . . . . . . .Adjusts red, green and blue to select
brightness of the colors you like.
Gamma R/G/B . . . . . . . . . .Adjusts red, green and blue to select
neutral colors you like.
Auto black stretch . . . . . .When this function is On, the black color in
the bright image is shown up.
Direct Operation with Remote control
Contrast enhancement . .Adjusts the contrast of colors in the
brighter image. You can select from
Off/L1/L2/L3. L3 is the most contrasty.
Transient improvement . . . .Adjusts the sharpness of the outline. You
can select from Off/L1/L2/L3. L3 is the
sharpest.
Pressing the LAMP button on the remote control, you
can select the lamp mode.
Pressing the RESET button on the remote control,
adjustments will reset to their factory settings.
Overscan . . . . . . . . . . . . .Adjusts overscanned area. It works only to
decrease the overscanned portion of the
screen from zero.
RESET button
S-VIDEO
U - 1
U - 2
U - 4
Reset
USER SETTING
COMPO.1
C 1
LIGHT
U - 3
RESET
COMPO.2
C 2
Resets adjustments to their factory default settings.
CANCEL
MENU
HDMI
PC
Store
LAMP MODE MY PICTURE
LAMP
SELECT
To store the adjustment data, select Store and press the Point Right
button. The Image Level Menu will appear. Choose one of 4 image
levels with the Point Up/Down button and press the SELECT button.
A confirmation box will appear and select [Yes].
LAMP button
NOTE
● Progressive cannot be selected when 480p, 575p, 720p is selected.
● Auto black stretch and Contrast enhancement and Transient improvement in
the Advanced menu cannot be selected when the input source is HDMI.
● Overscan cannot be selected when Full through and Normal through are
selected in the Screen Size Adjustment menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Screen Size Adjustment
This projector has a useful function to resize a projected screen.
Select the Screen Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Screen Menu
1
Select an item with the Point Up/Down button and press the
Point Left/Right button to set the screen size.
2
Full
Provides an image to fit the width of the screen by expanding the
width of the image uniformly. This function can be used to project a
squeezed video signal at a wide video aspect ratio of 16 : 9.
When your video equipment (such as DVD) has 16 : 9 output mode,
select 16 : 9 and select Full in this Screen Menu to provide better
quality.
Full through
Expands the width of an image and projects it in the center at a wide
screen ratio of 16 : 9. (You can enjoy a high-quality image though the
projected image is small.)
Zoom
Provides an image to fit the screen size (16 : 9 aspect ratio) by
expanding the width and height of the image uniformly. This function
can be used to project a letter box mode picture (4 : 3 aspect picture
with black bar on the top and bottom edges) at a wide video aspect
ratio of 16 : 9.
Full
Caption in 1
Provides an image including a caption to fit the screen size (16 : 9
aspect ratio) by expanding the height of the image uniformly.
Full through
Caption in 2
Provides an compressed image including captions to fit the screen
size(16:9 aspect ratio). This function is useful for the caption with
number of lines.
Zoom
Normal
Provides an image at a normal video aspect ratio of 4 : 3.
Caption in 1
Racing is stimulating!
Racing is stimulating!
Caption in 2
Normal
Racing is stimulating!
Let's enjoy it!
Racing is stimulating!
Let's enjoy it!
NOTE
● When Full through and Normal through are selected, overscan
cannot be selected in the Image Level Adjustment menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Normal through
Normal
through
Provides an image with no modification. (You can enjoy a high-quality
image though the projected image is small.)
Natural wide 1
Natural wide 1
Modifies an image of 4 : 3 aspect ratio to fit the screen size (16 : 9
aspect ratio). It expands the width and height of the image and
makes it look natural.
Natural wide 2
Natural
wide 2
When the signal is 16:9, modifies an image of 4 : 3 aspect ratio to fit
the screen size (16 : 9 aspect ratio). It expands the width and height
of the image and makes it look natural.
CANCEL
MENU
Direct Operation with Remote control
SELECT
Pressing the SCREEN button on the remote control, you can resize
the projected screen.
SCREEN
IMAGE ADJ.
SCREEN button
NOTE
● When “720p”, “1035i”, or “1080i” is selected in the AV System Menu,
Screen menu cannot be selected except for Full and Natural wide 2.(p26).
● When you do not select any signal format and enter the Screen menu, Full is
selected automatically, and the other items cannot be selected wherever the
check mark is.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Input Source Selection
Direct Operation
Choose INPUT source by pressing the INPUT button on the top
control or PC button on the remote control.
Top Control
Remote Control
VIDEO
DARK
U - 1
CLEAR
INPUT
S-VIDEO
U - 2
U - 4
SELECT
USER SETTING
COMPO.1
C 1
U - 3
COMPO.2
C 2
INPUT buttons
HDMI
PC
LAMP MODE MY PICTURE
LAMP
Menu Operation
Select the Input Source Selection Menu with the Point Up/Down
button, and then press the Point Right button to enter the sub-
menu.
Input Menu
1
Select Computer with Point UP/DOWN button and then press
the Point Right button. The Source Select Menu will appear.
2
Move the pointer to the source that you want to select and then
press the SELECT button.
3
When the input source is analog coming from a
computer connected to the COMPUTER terminal,
select RGB (Analog).
RGB (Analog)
When the input terminal is Scart with a DVD player
connected to the COMPUTER terminal , select
RGB (Scart).
RGB (Scart)
Source Selection Menu
pointer
Closes the source selection menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Computer System Selection
This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment
function provided in the projector. When selecting computer input, the projector automatically displays the most proper
image for the input signal. One of the following four displays appears on the system menu icon. If the projector does not
tune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, perform
manual adjustment as described on page 35 and 36.
When the projector cannot recognize the connected
signal as PC system provided in this projector, the Auto
PC adjustment function operates to adjust the projector
and the message “Auto” is displayed in the PC System
Menu icon. When the image is not provided properly,
manual adjustment is required. (p35, 36)
PC System Menu
Auto
There is no signal input from the connected computer.
Check the connection of the computer and see if the
projector is set correctly.
– – – –
(See “Troubleshooting” on page 52.)
User preset adjustment in Computer Adjustment.
Adjustment data can be stored in Mode 1 - 5. (p35, 36)
Mode 1
SVGA 1
Computer systems provided in the projector. The
projector chooses a proper system and displays it.
*Mode 1 and SVGA 1 are examples.
Menu Operation
PC system can also be selected manually if some PC systems appear
on the On-Screen Menu.
PC System Menu
Select the PC System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
1
Choose the system that you want to select with the Point
Up/Down button and then press the SELECT button.
2
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Computer Adjustment (Auto)
The Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. This function can be operated as follows.
Select the PC Adjust Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
PC Adjust Menu
1
2
Choose the AUTO PC adj. item and then press the SELECT
button.
Auto PC adj.
Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for
the input signal from your computer.
To store adjustment data
Adjustment parameters from Auto PC adjustment can be memorized
in this projector. Once parameters are memorized, the setting can be
done just by selecting Mode in the PC System Menu (p33). See
“Store” on page 36.
NOTE
● The Auto PC adjust cannot be operated when 480i”, “575i”, “480p”,
“575p”, “720p(HDTV)”, “1035i(HDTV)”, or “1080i”(HDTV) is selected in the
PC System Menu.
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Computer Adjustment (Manual)
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This
projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats.
The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to
recall the setting for a specific computer whenever you use it.
Select the PC Adjust Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
PC Adjust Menu
1
2
Select an item with the Point Up/Down button and press the
Point Left/Right button to adjust each item.
Fine sync
Adjusts an image as necessary to eliminate flicker from the display.
Press the Point Left/Right button to adjust value. (From 0 to 31)
Total dots
Shows status
(Stored / Free) of the
selected Mode.
Adjusts the number of total dots in one horizontal period. Press the
Point Left/Right button and adjust number to match your PC image.
Selected Mode
Horizontal
Adjusts horizontal picture position. Press the Point Left/Right button
to adjust the position.
Vertical
Adjusts vertical picture position. Press the Point Left/Right button to
adjust the position.
Current mode
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
Press the Point Right button to show the information of the
connected computer.
Clamp
Adjusts clamp level. When the image has dark bars, try this
adjustment.
Press the SELECT button to
adjust the next item.
Press the MENU button to
return to the previous On-
Screen Menu and store the
adjusted value.
Go on to the next page...
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Display area
Select Store to store adjust-
ment data.
Select the resolution at the Display area dialog box.
Display area H
Adjusts the horizontal area displayed by this projector. Press the
Point Left/Right button to decrease/increase value.
Display area V
Adjusts the vertical area displayed by this projector. Press the Point
Left/Right button to decrease/increase value.
Reset
To clear adjustment data
Resets adjustments to their factory default settings.
Mode free
To clear adjustment data previously set, select Mode free and press
the Point Right button. A dialog box will appear and choose one of 5
modes and then press the SELECT button.
Store
Closes this dialog box.
To store adjustment data, select Store and press the Point Right
button. A dialog box will appear and choose one of 5 modes and
then press the SELECT button.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode
Shows values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and “Display
area V.”
Direct Operation with Remote control
RESET button
Pressing the RESET button on the remote control, adjustments will reset to
their factory settings.
LIGHT
RESET
CANCEL
MENU
SELECT
NOTE
● Display area, and Display area (H/V), cannot be selected when “480i”,
“575i”, “480p”, “575p”, “720p(HDTV)”, “1035i(HDTV)”, or “1080i”(HDTV)
is selected in the PC System Menu (p33).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Image Level Selection
Direct Operation
Remote Control
Select an image level among Creative cinema, Pure cinema, Natural,
Video, Dynamic, Powerful, Graphic, User Image 1 ~ 4 by pressing the
IMAGE buttons (CLEAR, DARK, and U-1-4 buttons) on the remote
control. Each time you press the DARK button, Creative cinema, Pure
cinema, Natural or Video can be selected. These levels are suitable
for a dark room. Also, each time you press the CLEAR button,
Dynamic, Powerful or Graphic can be selected. These levels are
suitable for a bright room.
CANCEL
MENU
SELECT
SCREEN
IMAGE ADJ.
VIDEO
S-VIDEO
Menu Operation
DARK
U - 1
CLEAR
U - 2
Select the Image Select Menu with the Point Up/Down button,
1
USER SETTING
COMPO.1
C 1
and then press the Point Right button to enter the sub-menu.
U - 3
U - 4
COMPO.2
C 2
Choose the level that you want to select with the Point
Up/Down button and then press the SELECT button.
2
HDMI
IMAGE buttons
Creative cinema
Image Select Menu
To enjoy contrasting 3D images in a dark room.
Pure cinema
To enjoy images with quiet tone of colors without excess gradation in
a dark room.
Natural
To enjoy faithfully reproducted images without any control by the
projector. Suitable for a dark room.
Video
To enjoy sports or dramas from TV with contrasting clear images .
Suitable for a dark room.
Dynamic
To enjoy contrasting images in a bright room.
Powerful
To enjoy more contrasting powerful images in a bright room.
Graphic
To enjoy graphic images such as game or PC screen in a bright room.
User image 1~4
User preset images in the Image Adjust Menu (p38, 39)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Image Level Adjustment
Select the Image Adjust Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
Image Adjust Menu
1
2
Select an item with the Point Up/Down button and press the
Point Left/Right button to adjust the item.
Contrast
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast. (From -31 to +31)
Brightness
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter. (From -31 to +31)
Color temp.
Press the Point Left/Right button for Color temperature level that you
want to select. (High, Mid, Low1, Low2, Low3)
White balance (Red)
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone. (From -31 to +31)
White balance (Green)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone. (From -31 to +31)
This arrow indicates that there
are other item menus.
White balance (Blue)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone. (From -31 to +31)
Sharpness
Press the SELECT button or
Point Up/Down button to
adjust the next item.
Press the MENU button to
return to the previous On-
Screen Menu and store the
adjusted value. (See p38)
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From -7 to +7)
Gamma
Press the Point Left/Right button to obtain better balance of contrast.
(From -7 to +7)
Go on to the next page...
CANCEL
MENU
Direct Operation with Remote control
SELECT
You can adjust the items in the Image Level Adjustment menu with
pressing the IMAGE ADJ. button on the remote control. Press Point
Left/Right button to adjust each item. Press Up/Down button to get
to the next item.
SCREEN
IMAGE ADJ.
IMAGE ADJ. button
NOTE
● After adjusting any of the White balance Red, Green or Blue, the Color
temp. will change to "User".
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
This arrow indicates that there
Lamp mode
are previous items. Select this
item and press the Point Up
button to go to the previous
item.
This function allows you to change brightness of the screen.
Bright mode . . . . . . . . . Normal brightness
React image mode 1 . . The controlled brightness according with
input signal
React image mode 2 . .Less bright but quieter than React image
mode 1.
Theater black mode . . .Lowers brightness and reduces the lamp
power consumption.
Advanced Menu
This function can be selected only when Advanced menu in the
Setting is On . You can adjust following items through this function.
Press the Point Right button at
this icon to store the value.
Iris
. . . . . . . . . . . . . . .Press the Point Left button to adjust Iris.It
works only to stop down from zero.
Gain R/G/B . . . . . . . . . . . .Adjusts red, green and blue to select
contrast of colors you like.
Offset R/G/B . . . . . . . . . . .Adjusts red, green and blue to select
brightness of the colors you like.
Gamma R/G/B . . . . . . . . . .Adjusts red, green and blue to select
neutral colors you like.
The Image Level Menu will
appear. Choose one of 4
image levels with the Point
Up/Down button and press the
SELECT button. A confirma-
tion box will appear and select
[Yes].
Reset
Resets adjustments to their factory default settings.
Store
To store the adjustment data, select Store and press the Point Right
button. The Image Level Menu will appear. Choose one of 4 image
levels with the Point Up/Down button and press the SELECT button.
A confirmation box will appear and select [Yes].
RESET button
S-VIDEO
U - 1
U - 2
U - 4
USER SETTING
COMPO.1
C 1
LIGHT
Direct Operation with Remote control
U - 3
RESET
COMPO.2
C 2
CANCEL
MENU
HDMI
PC
Pressing the LAMP button on the remote control, you can select the
lamp mode.
LAMP MODE MY PICTURE
LAMP
SELECT
Pressing the RESET button on the remote control, adjustments will reset
to their factory settings.
LAMP button
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Screen Size Adjustment
This projector has a useful function to resize a projected screen.
Select the Screen Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Screen Menu
1
Select an item with the Point Up/Down button and press the
Point Left/Right button to set the screen size.
2
Normal
Provides image to fit screen size.
Full
Provides an image to fit the horizontal size of the screen.
True
Provides image in its original size. When the original image size is
larger than the screen size (1280 x 720), this projector enters “D.
zoom” mode automatically. "D. zoom" mode will be canceled after 10
seconds stop panning.
Digital zoom
When Digital zoom is selected, the On-Screen Menu disappears and
the message “D.Zoom” is displayed. Press the SELECT button to
expand the image. And press the POINT UP/DOWN/LEFT/RIGHT
button(s) to pan the image. The panning function can work only when
the original image is larger than screen size (1280 x 720).
CANCEL
MENU
Direct Operation with Remote control
SELECT
Pressing the SCREEN button on the remote control, you can resize
the projected screen.
SCREEN
IMAGE ADJ.
SCREEN button
NOTE
● This Screen Menu cannot be operated when “720p (HDTV)”, “1035i
(HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p33).
● Digital. zoom cannot be selected when “480i”, “575i”, “480p”, or “575p”
is selected in the PC System Menu (p33).
● Digital zoom can not be selected when True is selected.
● While selecting Digital zoom, press CANCEL button then the message "D.
Zoom" disappear with keeping the screen size you have adjusted.
● While selecting Digital zoom, press RESET button then the adjustment goes
back to the factory default setting.
● This projector cannot display any resolution higher than 1280 X 720. If your
computer’s screen resolution is higher than 1280 X 720, reset the resolution
to the lower before connecting to the projector.
● The image data in other than the resolution (1280 x 720) is modified to fit
the screen size in initial mode.
● The panning function may not operate properly if the computer system
prepared in the PC Adjust Menu is used.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Setting
Select the Setting Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Setting Menu (Language)
1
2
Select an item with the Point Up/Down button to set various
settings.
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Keystone
When the image is distorted vertically, select the Keystone. The On-
Screen Menu disappears and the Keystone dialog box is displayed.
Correct keystone distortion by pressing the Point Up/Down button.
Refer to Keystone Adjustment on page 21.
Blue back
When this function is “On,” the projector produces a blue image
while input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On ···· shows all the On-Screen Displays.
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
Off ···· does not show On-Screen Displays except;
●On-Screen Menu
●“Power off?” message
●“No signal” message
After selecting a language,
move the pointer to this icon,
and press the SELECT button
to activate it.
●”Wait a moment!” message
Background color
This function is used to change the color of background in the On-
Screen Menu.
.......Default background color
.......Background color is grayish and half transparent.
.......Background color is blackish and half transparent.
.......Background color is transparent.
Menu position
Menu position
This function is used to change the position of the On-Screen Menu.
Move it with the Point Up/Down/Left/Right button and press the
SELECT button to set it.
NOTE
● While selecting Keystone, press RESET button then the adjustment goes
back to the factory default setting.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Advanced menu
When this function is On, Advanced menu in Image level adjustment
(both Video and computer input) can be selected. See Image level
adjustment (p.29,39) for details.
Capture
Logo
This function decides what to be displayed when starting up.
Off
Default ···· the factory-set logo
User ···· the image you captured
···· count-down only
Capture
This function is used to capture the image being projected and use it
for a starting-up display or interval of presentations. After capturing
the projected image, go to the Logo function and set it as “User”.
Then the captured image will be displayed when turning on the
projector next time or pressing the MY PICTURE (MY-P) button on the
remote control. (p11)
Mounting
To capture the image, select [Yes]. To cancel the Capture function,
select [No]. To stop capturing in the middle, press CANCEL button.
Ceiling
Mounting
This function is used to select the way of setting the projector.
Off
···· Cancels the selected way of setting
Ceiling ···· Used to project the image from a ceiling mounting the
projector. The picture is top/bottom and left/right
reversed.
Wall
Wall
···· Used to project the image from a wall-hanging projector.
The picture is top/bottom reversed.
Rear
When this function is “On,” the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
Rear
NOTE
● A signal from a computer can be captured up to XGA(1024 x 768). If
selecting 1280 x 1024 at Display area in the PC Adjust Menu (p36), then the
image cannot be captured.
● A signal from video equipment can be captured except for 720p, 1035i,
1080i.
● When capturing the image that has been adjusted by the Keystone function,
the adjustment data is automatically reset and the projector captures an
image without keystone adjustment.
● If the Capture function fails to capture an image or cancel to capture in the
middle, the On-Screen Menu returns to the Capture item.
● If capturing a signal which is not able to be captured, an exclamation mark
appears and the function will not be available.
● When you change the Image Level, the Image Level of MY PICTURE also
changes from which it was captured .
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
This arrow indicates that there
Power management
are previous items. Select this
item and press the Point Up but-
ton to go to the previous item.
For reducing power consumption as well as maintaining the lamp
life, the Power management function turns off the projection lamp
when the input signal is interrupted and no button is pressed for 30
seconds or more.
Power management
When the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message "No signal"
appears on the screen. The count-down starts for 5 minutes.
When the count-down time has elapsed, the lamp will be turned off
to cool itself down. The POWER indicator is flashing red during this
cooling-off period. The next performance depends on setting as
follows.
On ··· When the lamp has been fully cooled down, the POWER
indicator changes to green flashing. In this condition, the
projection lamp will be turned on if the input signal is
reconnected or any button on the top control or remote
control is pressed.
Off ··· The Power management function is canceled.
Time left until
lamp off
Power off confirmation
The confirmation dialog box to turn off the projector is displayed with
this function ON.
Remote control
This projector has two different remote control codes: Code 1 (initial
code) and Code 2. This switching function prevents remote control
interference when operating several projectors or video equipment
together.
CODE1
CODE2
When operating the projector in “Code 1”, both the projector and
the remote control must be switched to “Code 1”.
To change the code of the projector;
Set the remote control code in the Setting Menu to “Code 2”.
Remote control Code switch
To change the code of the remote control;
Open the compartment lid on back of the remote control then you
will find a white switch. Slide it left or right to change the code of
the remote control.
After changing the code, make sure the remote control operates
properly.
To return to the initial code (Code 1), repeat the steps above.
HDMI setup
Select L1 or L2 with Point Left/Right button according to the output
signal of the video equipment.
L1 .........When the output of the video equipment is set
"STANDARD".
L2 .........When the output of the video equipment is set
"ENHANCED".
The names of the output setting of the video equipment vary from
equipment to equipment. For details, refer to the owner's manual of
the video equipment.
NOTE
● When the batteries of the remote control are replaced, the remote control
code automatically returns to the initial code (Code 1).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Factory default
Lamp counter reset
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. See page 51 for operation.
Factory default
This function returns all setting values except for the lamp counter to
the factory default settings.
Cleaning
This function is used to clean inside of the projector. Using blower
at the same time is more effective. (See p48)
Select Factory
default and this box
appears. Select
[Yes] , and the next
box appears.
Press the SELECT button, then the projected image is blacked out
temporary whether input source is selected or not. The fan starts to
move automatically to help blowing the dust.
Select [Yes] to acti-
vate it.
To restore to normal, press any other buttons.
To cancel, press any other button during the cleaning operation.
1.Adjust bright parts with the bright dialog.
Panel adjustment
This function is used to get the best picture reproduction of each of
the R(red), G(green) and B(blue) LCD panels. If proper adjustment is
not made, you might get vertical noise lines on the screen.
This function should be made about ten minutes after turning on the
projector, with any signals or without a signal.
Darker environment makes your adjustment more accurate.
The Test pattern screens appear in the order of red, green, blue.
Adjust each patterns as follows.
1. Adjust Bright dialog to minimize vertical lines in the bright part of
the picture.
2.Adjust dark parts with the dark dialog.
2. Adjust Dark dialog to minimize vertical lines in the dark part of
the picture.
3. Press the Point Up/Down button to get to the next color.
Repeat 1 and 2 for each of R,G,B panels until lines of the picture
are minimized.
4. Press the Point Up/Down button to get to the Check pattern
screen and check adjustment.
3.Then adjust Test pattern G and
Test pattern B in the same way.
5. To close this screen, press MENU.
4.Check adjustment with Check pattern screen.
NOTE
● When Panel adjustment is selected, Power management cannot be
selected.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is flashing red
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect the
inside of the projector. The POWER indicator is flashing and the
projector is being cooled down. When the temperature inside the
projector returns to normal, the POWER indicator lights red and the
projector can be turned on.
TOP CONTROL
POWER
WARNING
flashing red
WARNING
NOTE
LAMP
● After the temperature inside the projector returns to normal, the WARNING
indicator still continues to flash. When the projector is turned on again, the
WARNING indicator stops flashing.
REPLACE
Then check the items below.
✓ Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation slots
are not blocked.
✓ Is the projector not installed near the ventilation duct of air-
conditioning equipment which may be hot? Install the projector
away from the ventilation duct of air-conditioning equipment.
✓ Is the air filter clean? Clean the air filter or replace it with a new
one.
The projector is shut down and the WARNING indicator lights red
When the projector detects an abnormal condition, it is automatically
shut down to protect the inside and the WARNING indicator lights
red. In this case, disconnect the AC power cord and reconnect it, and
then turn the projector on once again for check. If the projector is
turned off again and the WARNING indicator lights red, disconnect the
AC power cord and contact the service station for check and repair.
TOP CONTROL
POWER
WARNING
lights red
WARNING
LAMP
REPLACE
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC POWER
CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Cleaning the RGB panels
If some dusts attach to optical parts inside the projector, the brightness could decrease or shadows could
appear on the screen and image deterioration could result.
This projector equipped with RGB panel cleaning holes on the bottom of the projector to clean the internal parts
(such as optical parts) of the projector. When you use the projector continuously for hours or you find shadows
of dust on the projected screen, clean the inside of the projector with the supplied blower.
Using the supplied blower and the Cleaning function in the Setting menu, you can blow dusts away in the
projector.
NOTE
● The dust might not be taken away completely with these steps. In that case, contact the dealer where you purchased the projector or
the service center.
CAUTION IN USING THE BLOWER AND THE NOZZLE
● When using the blower, turn over the projector.
● Use only supplied blower and nozzle to keep the projector from being out of oder or damaging . We
could not guarantee the malfunction or breakage caused by using unsupplied tools.
● Do not use a commercially available air spry not to cause malfunction of internal parts with the cool air.
● Put the projector on a soft cloth not to scratch the surface.
CAUTION
● Open the hole cover only when you clean the inside of the projector.
● Do not pull the hole cover strongly.
PROHIBITED
● Do not look into the holes. Strong light could damage your eyes. (Do not look into Air intake vent and
Exhaust vent, either.)
● Use the blower and the nozzle only to clean the projector. Do not try to use them to another purpose.
Do not use the blower and nozzle to a man (especially eyes, mouth or ear and so on). Be careful
not children put the blower and nozzle into their mouths or swallow them.
● Do not try to pull the nozzle out from the blower. If the nozzle happened to pull off, put it back into the
blower.
When you find something unusual (smoke, strange sound, abnormal odor and so on) while you are cleaning, turn
off and unplug the projector immediately, then call the dealer you purchased it or service center.
Pull the nozzle in
the blower this way
If the nozzle pulled off.....
Pull the nozzle in
till the stopper
become invisible
The nozzle has stoppers. Put the stopper side of the nozzle in the
blower. Put the nozzle firmly in the blower until the stoppers become
invisible.
When putting the nozzle in the blower, hold the stopper side not to
break the nozzle.
Stopper
Make sure not to force the nozzle to pull off from the blower.
Hold the stopper
side of the nozzle
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Clean with using the cleaning function in the Setting menu
Pull one of the hole
cover upward gently.
Press MENU button to display the On-Screen Menu and select
the Setting menu by pressing the Point Up/Down button. Then
press Point Right button to enter the sub-menu.
1
2
Press Point Up/Down button to select the Cleaning function
then press SELECT button to select the item.
The image is blacked out temporary.
The nozzle will be
stopped by the stoppers
when being put in the
hole. Do not try to force
the nozzle into further.
The nozzle could be
break and fall into inside
of the projector.
3
4
Turn over the projector then pull one of the hole covers upward
gently.
Put the blower nozzle in the hole.
5
6
While watching the position of the dust on the screen, blow air
into the projector by the blower.
When finishing, pull the blower out and put the hole cover back
tightly.
7
8
*
Turn over the projector again, then press any button on the top
control or on the remote control to cancel the Cleaning function.
Do not open the bottom cover except for when you clean the inside of the
projector.
Especially while operating the projector, the optical parts could damage.
When cleaning, wave the nozzle inside of the
projector back and forth.
(Do not try to force the nozzle to bend.)
Which hole to put the nozzle in?
Use only supplied blower and nozzle.
Do not use a commercially available air spry
not to cause malfunction of internal parts with
the cool air. We could not guarantee the malfunction
of breakage by using unsupplied tools.
When you look at the screen
● When red spots (dust) are the most remarkable, put the nozzle in
the R panel cleaning holes.
● When Green spots (dust) are the most remarkable, put the nozzle in
the G panel cleaning holes.
● When Blue spots (dust) are the most remarkable, put the nozzle in
the B panel cleaning holes.
When putting back the hole cover, starts from the outside hole to make the operation easier and prevent the hole
cover from damaging.
Inside Outside
Put the hole covers back tightly
after cleaning.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Cleaning the Air Filter
The air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air
filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up
and adversely affect the life of the projector. Clean the air filters according to the following steps below.
Air Filter 1
(Intake Vent)
Air Intake Vent
Turn off the projector and disconnect the AC power cord from
the AC outlet.
1
2
Turn over the projector. Put the projector on a soft cloth not to
scratch the surface.
Cleaning the Air Filter 1
Push the latch and lift the air filter. Do not try to pull the delicate
filter part.
3
Air Filter 2
Pull the Air Filter horizontally not to break the inside latch.
4
Press here(the latch)
3
6
Remove dust and dirt with a soft brush or vacuum cleaner. Be
careful not to damage the air filter and do not clean the air filter
with water. Clean the air intake vent with a vacuum cleaner at
the same time.
5
4
Put the air filter back into the position with pushing the top of
the tub. Do not push the delicate filter part. Make sure that the
air filters are properly and fully inserted.
6
w
Push here
q
w
Put the latch in the groove
Push the top of the tab
q
Cleaning the Air Filter 2
Pull the latches on both edges upward.
Air Filter 2
3
Remove dust and dirt with a soft brush or vacuum cleaner. Be
careful not to damage the air filters and do not clean the air
filters with water. When there is much dust and dirt on the air
filter, replace it with a new one. (See next page for replacing
the air filter. )
4
Put the air filters back into position. Make sure that the air
filters are properly and fully inserted.
5
Latch
CAUTION
Do not operate the projector with the air filter removed.
Dust may accumulate on the LCD panel and the projection
mirror degrading picture quality.
Do not put small parts into the air intake vents. It may
result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when operating
the projector. When using under dusty or smoky conditions, dust
may accumulate on a lens, LCD panels, or optical elements inside the
projector. This condition may degrade the quality of a projected
image.
When the above symptoms are noticed, contact your authorized
dealer or service station for proper cleaning.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Replacing the Air Filter
When there is much dust and dirt on the air filter, replace it with a new one following the steps below.
After removing the air filter from the projector as described
above, remove the replacement filter from the holder.
1
Holds the air filter with both hands, and remove the replacement
filter by pulling it up.
2
Install a new replacement filter and put the air filter back into the
projector.
3
Remove the
replacement filter as
shown this figure.
Replacement Filter
Holder
Install the replace-
ment filter securely.
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
Disconnect the AC power cord before cleaning.
1
Softly wipe the projection lens with a cleaning cloth that con-
tains a small amount of non-abrasive camera lens cleaner, or use
lens cleaning paper or a commercially available air blower to
clean the lens. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh chemicals might
scratch the surface.
2
When the projector is not in use, replace the lens cover.
3
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
Disconnect the AC power cord before cleaning.
1
Softly wipe the projector body with a soft, dry cleaning cloth.
When it is heavily soiled, use a small amount of mild detergent
and finish with a soft, dry cleaning cloth. Avoid using an
excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface.
2
When the projector is not in use, put the projector in the carry-
ing case to protect it from dust and scratches.
3
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector draws to an end,
the LAMP REPLACE indicator lights yellow. If this indicator lights
yellow, replace the lamp with a new one promptly.
Top Control
POWER
This indicator lights yellow
WARNING
when the life of the projection
lamp draws to an end.
LAMP
REPLACE
CAUTION
Allow a projector to cool, for at least 45 minutes before
you open the Lamp cover. The inside of the projector
can become very hot.
CAUTION
For continued safety, replace with a lamp of the same
type. Do not drop a lamp or touch a glass bulb! The
glass can shatter and may cause injury.
Lamp Cover
Screw
Follow these steps to replace the lamp.
Turn off the projector and disconnect the AC plug. Allow the
projector to cool for at least 45 minutes.
1
Turn over the projector. Loosen the screw with a screwdriver,
and remove the lamp cover.
2
Loosen 2 screws of the lamp with a screwdriver and pull out the
lamp by grasping the handle.
3
Replace the lamp with a new one and tighten the 2 screws back
into position. Make sure that the lamp is set properly. Replace
the lamp cover and tighten the screw.
4
Lamp
Screw
Connect the AC power cord to the projector and turn on the
projector.
5
Handle
Screw
Reset the Lamp replace counter.
See “Lamp Replace Counter” on the next page .
6
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information
to the dealer.
● Model No. of your projector
:
:
PLV-Z3
● Replacement Lamp Type No.
POA-LMP86
(Service Parts No. 610 317 5355)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Lamp Replace Counter
Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP
REPLACE indicator stops lighting.
Turn the projector on, press the MENU button, and the On-
Screen Menu will appear. Select the Setting Menu with the
Point Up/Down button and press the Point Right button to
enter the sub-menu.
Lamp counter reset
1
2
Select the Lamp counter reset item and then press the
SELECT button. The message "Lamp replace counter
Reset?" is displayed. Choose [Yes] and then press the
SELECT button.
Another confirmation dialog box appears and choose [Yes] to
reset the Lamp replace counter.
3
NOTE
● Do not reset the Lamp replace counter without implementation of lamp
replacement. Be sure to reset the Lamp replace counter only after
replacing the lamp.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a
shorter period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use
of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described in “Connecting to Video
Equipment” and "Connecting to a Computer" on page16 -18.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the computer.
–
Problem:
Try these solutions.
No power
– Plug the power cord of the projector into the AC outlet.
– See if the front cover is open and the POWER indicator lights red.
– See if the Main On/Off switch is on.
– Wait 90 seconds after the projector is turned OFF when turning the projector back on.
The projector can be turned on after the POWER indicator turns red. (See “Turning Off
the Projector” on page 19.)
– Check the WARNING indicator. If the WARNING indicator lights red, the projector cannot
be turned on. (See "Warning Indicator" on page 45.)
– Check the projection lamp. (See page 49.)
– Check the projector is installed on the flat surface.
–
Image is out of focus.
Adjust focus of the projector.
–
–
–
Provide proper distance between the projector and the projection screen. (See page 13.)
Check the projection lens to see if it needs cleaning. (See page 49.)
Moving the projector from a cool temperature location to a warm temperature location
may result in moisture condensation on the projection lens. In such an event, leave the
projector OFF and wait until condensation disappears.
–
–
No image
Check the connection between video equipment or your computer and the projector.
See if the input signal is correctly output from your computer. Some laptop computers
may need changing the setting for monitor output when you are connecting a laptop
computer. See your computer’s owner’s manual for setting.
–
–
–
–
It takes about 20 seconds to display an image after turning on the projector.
See if the selected system is corresponding with video equipment or your computer.
Select correct input source once again through menu operation.
Make sure the temperature is not out of the Operating Temperature (5°C ~ 35°C).
–
Image is Left/Right
reversed.
Check the Mounting / Rear item. (See “Setting” on page 42.)
–
–
Image is Top/Bottom
reversed.
Check the Mounting item. (See “Setting” on page 42.)
Check the Display item. (See “Setting” on page 41 .)
Some displays are not
seen during the Operation.
–
–
–
The Remote Control
does not work.
Check the batteries.
Make sure no obstruction is between the projector and remote control.
Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5m).
Make sure the code of the remote control is conformed to that of the projector. (See
page 43)
–
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
after following all operating instructions,
Give the model number and explain about the problem. We will advise you how to obtain service.
If problems still persist
service center.
contact the dealer where you purchased the projector or the
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
Projector Condition
POWER
red/green/
orange
LAMP
REPLACE
yellow
WARNING
red
The Main On/Off switch is off or the AC power cord is unplugged.
The projector is preparing for stand-by. Or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed.
✽
✽
✽
✽
The projector is ready to be turned on with the POWER ON-OFF button.
The projector is operating normally.
The projector is in the Power management mode.
The temperature inside the projector is abnormally high. The projector can-
not be turned on. When the projector is cooled down enough and the
temperature returns to normal, the POWER indicator lights red and the pro-
jector can be turned on. (The WARNING . indicator keeps flashing.) Check
and clean the Air filter.
✽
✽
✽
The projector has been cooled down enough and the temperature returns
to normal. When turning on the projector, the WARNING indicator stops
flashing. Check and clean the air filter.
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup. Do not leave the pro-
jector on. It may cause electric shock or a fire hazard.
The lamp does not light because malfunction occurs or the lamp life
comes to an end.
The front cover is closed.
✽
• • • lights orange.
• • • flashes yellow.
• • • lights green.
• • • lights red.
• • • flashes green.
• • • off
• • • flashes red.
✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp.
See page 50 and 51.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Menu Tree
Video Input/Computer Input
Video
Video
Go to System (1)
Go to System (1)
Go to System (2)
Go to System (2)
Go to System (3)
Go to System (4)
Input
S-video
Component 1
Component 2
HDMI
Computer
Computer
RGB(Analog)
RGB(Scart)
N/A
✽N/A - - - not applicable
Video Input
System (1)
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
Contrast
Brightness
Color ❖
Tint ❖
Color temp.
Image Adjust
-31 ~ +31
-31 ~ +31
-31 ~ +31
-31 ~ +31
High
Mid
PAL-N
Low 1
Low 2
Low 3
System (2)
Auto
1080i
1035i
720p
575p
480p
575i
User
Red
Green
Blue
Sharpness
Gamma
Progressive
-31 ~ +31
-31 ~ +31
-31 ~ +31
-7 ~ +7
-7 ~ +7
Off
L1
L2
480i
On / Off
Film
Bright mode
Lamp mode
System (3)
Selected system
React image mode 1
React image mode 2
Theater black mode
Advanced menu
Iris
Gain R/G/B
Offset R/G/B
Gamma R/G/B
Image Select
Creative cinema
Pure cinema
Natural
Video
Dynamic
Powerful
Graphic
User image 1
User image 2
User image 3
User image 4
Auto black stretch ❖
Contrast enhancement
Transient improvement
❖
❖
Overscan
Yes / No
Reset
Store
User image 1
User image 2
User image 3
User image 4
Quit
- - - not applicable when
selecting HDMI.
❖
Screen
Full
Full through
Zoom
Caption in 1
Caption in 2
Normal
Normal through
Natural wide 1
Natural wide 2
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Computer Input
Mode 1
Mode 2
SVGA 1
- - - -
System (4)
Screen
Normal
Full
True
Digital zoom
✽Systems displayed in the System Menu vary
depending on an input signal.
PC Adjust
Auto PC adj.
Fine sync.
Total dots
Horizontal
Vertical
0 ~ 31
Setting
Language
English
German
French
Setting
Current mode
Clamp
0 ~ 127
Display area
640 x 480
720 x 400
800 x 600
1024 x 768
1152 x 864
1280 x 720
1280 x 1024
Quit
Italian
Spanish
Portuguese
Dutch
Swedish
Russian
Chinese
Korean
Japanese
Quit
Display area - H
Display area - V
Reset
Yes / No
Keystone
Blue back
Display
Mode free
Store
On / Off
On / Off
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Background color
Image Select
The same as Video Input.
Menu Position
Advanced menu
On / Off
Logo
Off
Default
User
Image Adjust
Contrast
Brightness
Color temp.
-31 ~ +31
-31 ~ +31
High
Capture
Yes / No
Mounting
Off
Ceiling
Wall
Mid
Low 1
Low 2
Rear
On / Off
On / Off
Power management
Low 3
User
-31 ~ +31
-31 ~ +31
-31 ~ +31
Power off confirmation
Remote control
On / Off
Code 1
Code 2
Red
Green
Blue
Lamp counter reset
Factory default
Cleaning
Yes / No
Yes / No
Sharpness
Gamma
Lamp mode
-7 ~ +7
-7 ~ +7
Bright mode
React image mode 1
React image mode 2
Theater black mode
Iris
Test pattern R
Test pattern G
Test pattern B
Check pattern
Panel adjustment
Advanced menu
Gain R/G/B
Offset R/G/B
Gamma R/G/B
Yes / No
Reset
Store
User image 1
User image 2
User image 3
User image 4
Quit
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100
MHz of Dot Clock.
ON-SCREEN
DISPLAY
ON-SCREEN
DISPLAY
H-Freq.
(kHz)
V-Freq.
(Hz)
H-Freq.
(kHz)
V-Freq.
(Hz)
RESOLUTION
RESOLUTION
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
575i
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.63
15.34
35.16
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.48
60.31
48.50
44.00
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
XGA 8
XGA 9
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1152 x 900
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
68.68
64.20
61.20
50.00
50.00
61.85
46.43
48.36
47.70
48.36
31.47
31.25
45.00
37.50
33.75
33.75
28.125
79.35
87.17
(Interlace)
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
MAC 21
SXGA 1
SXGA 11
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
75.08
75.06
70.40
65.20
640 x 480
––––––––
50.00
(Interlace)
60.00
(Interlace)
––––––––
480i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
85.00
75.03
70.07
74.92
60.02
54.58
86.00
(Interlace)
94.00
(Interlace)
SXGA 13 1280 x 1024
SXGA 14 1280 x 1024
SXGA 17
1152 x 900
66.00
86.70
SXGA 18 1280 x 1024
(Interlace)
WXGA 1
WXGA 2
WXGA 3
480p
575p
720p
720p
1035i
1080i
1080i
1366 x 768
1360 x 768
1376 x 768
60.00
60.00
60.00
59.88
50.00
60.00
50.00
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
When an input signal is digital from HDMI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
ON-SCREEN
DISPLAY
H-Freq.
(kHz)
V-Freq.
(Hz)
H-Freq.
(kHz)
V-Freq.
(Hz)
RESOLUTION
RESOLUTION
––––––
––––––
––––––
––––––
––––––
––––––
––––––
––––––
––––––
D-VGA
D-480i
D-525i
D-480p
D-575p
640 x 480p
720 x 480i
720 x 575i
720 x 480p
720 x 575p
59.94/60
59.94/60
50.00
59.94/60
50.00
D-720p
D-720p
D-1080i
D-1080i
1280 x 720p
1280 x 720p
1920 x 1080i
1920 x 1080i
59.94/60
50.00
59.94/60
50.00
NOTE
● You might be able to project images even when signals other than above are input. But in that case, functions of the projector
could be limited.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Technical Specifications
Multimedia Projector
Projector Type
14.13" x 4.59" x 10.77" (359mm x 116.7mm x 273.5mm) (not including raised portions)
9.0 lbs (4.1 kg)
(W x H x D)
Dimensions
Net Weight
0.7” wide TFT Active Matrix type, 3 panels
1280 x 720 dots
LCD Panel System
Panel Resolution
2,764,800 (1280 x 720 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz
Adjustable from 31” to 200”
Number of Pixels
Color System
High Definition TV Signal
Scanning Frequency
Projection Image size
Projection Lens
Throw Distance
(Diagonal)
F 2.04 ~ 2.54 lens with f 21.5 mm ~ 27.7 mm with manual zoom and focus
3.9’ ~ 20.0’ (1.2 m ~ 6.1 m)
135 W
Projection Lamp
RCA Type x 1 (Video), RCA Type x 3(Y, Pb/Cb, Pr/Cr) x 2 and Mini DIN 4 pin x 1 (S-video)
(VGA) HDB 15 Terminal x 1
Video Input Jacks
Computer Input Terminal
HDMI Input Terminal
Service Port Connector
HDMI terminal 19 pin x 1
Mini DIN 8 pin x 1
0˚ to 11.8˚
Feet Adjustment
Voltage and
Power Consumption
AC 100 ~ 120 V (2.4 A Max. Ampere), 50 / 60 Hz (The U.S.A. and Canada)
AC 200 ~ 240 V (1.3 A Max. Ampere), 50 / 60 Hz (Continental Europe and The U.K.)
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
Operating Temperature
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)
Storage Temperature
Remote Control
Power Source
Operating Range
Dimensions
:
:
:
:
AA, UM3 or LR06 1.5V ALKALINE Type x 2
16.4’ (5m) / 30˚
1.97” x 1.06” x 6.61” (50mm x 27mm x 168mm)
4.4oz (126g) (including batteries)
Net Weight
Owner’s Manual
AC Power Cord
Accessories
Remote Control and Batteries
Video Cable
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a
tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
● The On-Screen Menu and figures in this manual may differ slightly from the product.
This symbol on the nameplate means the product is Listed by Underwriters Laboratories
Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of
fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
Pixelworks ICs used.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Dimensions
Unit : inch (mm)
4.52 (114.7)
14.13 (359)
2.68 (68)
11.8˚ (Max.)
ON-OFF
POWER
WARNING
LAMP
REPLACE
10.77 (273.5)
MENU
INPUT
SELECT
4.59 (116.7)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Configurations of Terminal
Video terminal
Terminal : HDMI
Pin Configuration
TMDS Data 2+ Input
Ground (TMDS Data 2)
TMDS Data 2- Input
TMDS Data 1+ Input
Ground (TMDS Data 1)
TMDS Data 1- Input
TMDS Data 0+ Input
Ground (TMDS Data 0)
TMDS Data 0- Input
TMDS Clock+ Input
Ground (TMDS Clock)
TMDS Clock- Input
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
1
3
5
7
9
11 13 15 17 19
2
4
6
8
10 12 14 16 18
-----
-----
SCL
SDA
19 Pin Type A
Ground(DDC/CEC)
+5V Pwer
Plug insetr detection
10
Computer terminal
Terminal : VGA
Pin Configuration
1
2
3
4
5
6
7
8
Red (R/Cr) Input / Output
Green (G/Y) Input / Output
Blue (B/Cb) Input / Output
-----
Ground (Horiz.sync.)
Ground (Red)
9
-----
10 Ground (Vert.sync.)
11 Ground / -----
12
13 Horiz. sync. Input/Output (Composite H/V sync.)
14 Vert. sync.
15
2
5
1
4
3
-----
10
9
8
7
6
15
12
11
14
13
Ground (Green)
Ground (Blue)
-----
Optional Parts
The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer.
● Wall Anchor Kit
Type No. : POA-CH-EX01
Type No. : POA-CA-HDMI
Type No. : POA-CA-COMP10
Type No. : POA-CA-SCART
● HDMI Cable
● Component Cable (32.8’/10m)
● Scart-VGA Cable
(This cable is used for RGB Scart 21-
Pin Video output of video equipment.)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Japan
Part No. 610 317 4693 (1AA6P1P4651-- M4SA)
SANYO Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|