Sanyo DVD VCR Combo HV DX1E User Guide

HV-DX1E

INSTRUCTION MANUAL

DVD Player + Video Cassette Recorder

PAL

Only cassettes marked

can be used with this DVD+VCR.

PAL

Please read this manual carefully before connecting your DVD+VCR and operating it for the first time.

Keep the manual in a safe place for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Operation with Audio CD and MP3 Discs. . . . . . . 29

Playing Audio CD and MP3 Discs . . . . . . . . . . . . . . 29

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Moving to another Track . . . . . . . . . . . . . . . 29

ꢀ Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 29

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Changing the Audio Channel . . . . . . . . . . . . 29

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 30

Programmed Playback with Audio CD

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

and MP3 Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Programmed Playback with Video CD . . . . . . . . . . 30

ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 30

ꢀ Erasing a Track from Programme list . . . . . . 30

ꢀ Erasing the Complete Programme list . . . . . 30

Additional Operation - VCR part . . . . . . . . . . . 31-32

On Screen Display. . . . . . . . . . . . . . . . . . . . . . . 31

Tape Counter Memory Stop . . . . . . . . . . . . . . . . 31

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Friendly User Guide (Video Doctor) . . . . . . . . . . 31

Hi-Fi Stereo Sound System . . . . . . . . . . . . . . . . 32

Widescreen Compatibility 16:9 . . . . . . . . . . . . . . 32

Additional Operation - DVD part . . . . . . . . . . . . . . 33

Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 33

Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 33

Special Recording . . . . . . . . . . . . . . . . . . . . . . . . . 34

Copying from DVD to VCR. . . . . . . . . . . . . . . . . 34

Recording from another video recorder . . . . . . . 34

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

Connecting to a TV & Satellite Receiver. . . . . . . 10

Connecting to Optional Equipment . . . . . . . . . . . 11

Before Operation - VCR part . . . . . . . . . . . . . . 12-16

Video channel Set . . . . . . . . . . . . . . . . . . . . . . . 12

Using your DVD+VCR for the very first time . . . . 12

How to use the main menu . . . . . . . . . . . . . . . . 13

Tuning in TV stations Automatically . . . . . . . . . . 13

Tuning in TV stations Manually. . . . . . . . . . . . . . 14

Changing the order of TV stations . . . . . . . . . . . 15

Deleting TV stations. . . . . . . . . . . . . . . . . . . . . . 15

Setting the clock Manually . . . . . . . . . . . . . . . . . 16

To set the colour system . . . . . . . . . . . . . . . . . . 16

Before Operation - DVD part . . . . . . . . . . . . . . 17-20

General Explanation. . . . . . . . . . . . . . . . . . . . . . 17

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 17

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 18-19

ꢀ General Operation . . . . . . . . . . . . . . . . . . . . 18

ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ Others (DRC/Vocal/PBC). . . . . . . . . . . . . . . 19

ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 20

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 35-36

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 37

Country Code list . . . . . . . . . . . . . . . . . . . . . . . . . 38

Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Operation

Operation with Tape . . . . . . . . . . . . . . . . . . . . . 21-25

Playing a tape . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ CM (Commercial Message) CUT . . . . . . . . . 21

ꢀ DPC (Digital Picture Control) . . . . . . . . . . . . 21

Quick Set Recording (QSR) . . . . . . . . . . . . . . . . 22

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

VIDEO Plus+ System recording. . . . . . . . . . . . . 23

Timer recording using On Screen Display . . . 24-25

Operation with DVD and Video CD . . . . . . . . . . 26-28

Playing DVD and Video CD . . . . . . . . . . . . . . . . 26

General Features. . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 26

ꢀ Moving to another CHAPTER/TRACK . . . . . 26

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Still Picture and Frame-by-Frame Playback . 27

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 28

Special DVD Features . . . . . . . . . . . . . . . . . . . . 28

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Changing the Audio Language. . . . . . . . . . . 28

ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

VIDEO Plus+ and PlusCode are registered trademarks of

Gemstar Development Corporation.

The VIDEO Plus+ System is manufactured under licence

from Gemstar Development Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Title (DVD only)

Playable Discs

The main film content or accompanying feature content

or additional feature content, or music album. Each title

is assigned a title reference number enabling you to

locate it easily.

DVD

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Sections of a picture or a musical piece that are smaller

than titles.

Audio CD

(8 cm / 12 cm disc)

In addition, this unit can play a CD-R or CD-RW that

contains audio titles or MP3 files.

A title is composed of one or several chapters. Each

chapter is assigned a chapter number, enabling you to

locate the chapter you want. Depending on the disc, no

chapters may be recorded.

Notes

– Depending on the conditions of the recording equip-

ment or the CD-R/RW disc itself, some CD-R/RW

discs cannot be played on the unit.

– The unit cannot play the CD-R/RW discs that contain

no data, or contain different kinds of formatted data

other than MP3 and CD-DA data.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

– Do not use irregular shaped CDs (e.g., heart-shaped

or octagonal). It may result in malfunctions.

Track (Video CD and audio CD only)

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

A scene is composed of one or several tracks.

Notes on DVDs and Video CDs

Some playback operations of DVDs and Video CDs

may be intentionally fixed by software manufacturers.

As this unit plays DVDs and Video CDs according to

disc content designed by the software manufacturer,

some playback features of the unit may not be avail-

able, or other functions may be added.

Refer also to the instructions supplied with the DVDs

and Video CDs. Some DVDs made for business pur-

poses may not be played on the unit.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

Regional code of the DVD+VCR and DVDs

This DVD+VCR is designed and manufactured

for playback of region “2” encoded DVD soft-

ware. The region code on the labels of some DVD discs

indicates which type of player can play those discs. This

unit can play only DVD discs labeled “2” or “ALL”. If you

try to play any other discs, the message “Check Regional

Code” will appear on the TV screen. Some DVD discs

may not have a region code label even though their

playback is prohibited by area limits.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

Note on DTS-encoded CDs

To avoid possible damage to the audio system, turn

down the volume before playing back such discs, adjust

the volume gradually, and keep the volume level low. To

enjoy DTS Digital Surround^TMplayback, an external 5.1

channel DTS Digital Surround^TMdecoder system must

be connected to the digital output of the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Cont’d)

Precautions

Cleaning discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packed at the factory.

When setting the unit

The picture and sound of a nearby TV or radio may be

distorted during playback. In this case, position the unit

away from the TV or radio, or turn off the unit after

removing the disc.

Do not install this equipment in a confined space, such

as a book case or built in cabinet.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

About Symbols

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber of plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

About the

symbol display

“

” may appear on the TV screen during operation.

This icon means the function explained in this instruc-

tion manual is not available on that specific DVD video

disc.

Cleaning the unit

To clean the cabinet

About the disc symbols for instructions

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents, such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

A section whose title has one of the following symbols is

applicable only to those discs represented by the sym-

bol.

DVD DVDs

VCD2.0

VCD1.1

Video CDs with the PBC (playback control)

function

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn down, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

Video CDs without the PBC (playback control)

function

Audio CDs

MP3 MP3 discs

For details, please contact your nearest dealer.

Setting the Output Source

You must select one of your output sources (DVD or

Notes on Discs

VCR) to view on the TV screen.

• If you want to view output source of DVD deck:

Press DVD on the remote or DVD/VCR on the front panel

until DVD indicator on the front panel lights and output

source of DVD deck is viewed on the TV screen.

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

• If you want to view output source of VCR deck:

Press VCR on the remote or DVD/VCR on the front panel

until VCR indicator on the front panel lights and output

source of VCR deck is viewed on the TV screen.

Do not stick paper or tape on the disc.

• To select output source, press the OUTPUT SELECT

button on the remote control. Please see below.

Note the DVD+VCR must be tuned into the TV stations

before this feature can operate correctly.

Operates only after Auto Tuning operation.

Cycles through the 3 main output views: DVD, Tuner and VCR.

DVD: To view the current DVD deck status. (disc playback,

DVD menu or setup menu, etc)

Tuner: To view TV programmes through TV tuner.

VCR: To view the current VCR deck status (tape playback,

VCR programming or viewing TV programmes

through the VCR tuner, etc).

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

Disc Tray (DVD deck)

Insert a disc here.

EJECT(Z)

Ejects the tape in the VCR deck.

CHANNEL (+/-)

To scan up or down through memorized channels.

Cassette Compartment (VCR deck)

Insert a video cassette here.

Remote Sensor

Point the DVD+VCR remote control here.

Display window

Shows the current status of the DVD+VCR.

OPEN/CLOSE (Z)

Opens or closes the disc tray.

PLAY (B)

Starts playback of a tape in

the VCR deck.

DVD/VCR indicator

Indicates the active deck.

STOP (x)

Stops playback of disc.

STOP (

)

Stops playback of tape.

REC (z)

To record normally or to activate

PLAY (B)

Starts playback of a disc

in the DVD deck.

Instant Timer Recording.

AV INPUT (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an

external source (Audio system,

TV/Monitor, Another VCR).

PAUSE/STILL(X)

Pause playback of a disc in the DVD

deck temporarily/ press repeatedly

for frame-by-frame playback.

OUTPUT SELECT (DVD/VCR)

Select the output source (DVD or

VCR) to view on the TV screen.

Switches the DVD+VCR ON and OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

CD Audio CD inserted

DVD

DVD inserted

VCD Video CD inserted

A y B Indicates A-B repeat mode.

ALL Indicates repeat all mode.

ANGLE active.

MP3 MP3 disc inserted.

PROG. Programmed playback active.

TITLE Indicates current title number.

CHP/TRK Indicates current chapter or track number.

VCR DVD+VCR functions are available and channels

are selected at DVD+VCR.

TIMER DVD+VCR is in timer recording or a timer

recording is programmed.

REC DVD+VCR is Recording.

Front panel buttons are locked.

REC

Hi-Fi

PROG. TITLE CHP/TRK VCR TIMER

ALL MP3

BIL PR

VCD

DVD

PR DVD+VCR is tuned to

Channel Programme number.

BIL Indicates when a NICAM BILINGUAL

broadcast is being received.

ST Indicates a stereo broadcast is

being received.

Indicates total playing time, elapsed time, remaining time or

current deck status (Playback, Pause, etc).

Hi-Fi Indicates the unit is playing back a tape recorded in Hi-Fi.

SP/LP/EP Displays the recording and playback speed.

A cassette is in the VCR deck.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

DVD/VCR select button

Select the output source (DVD or VCR) to

view on the TV screen.

OPEN/CLOSE, EJECT (Z)

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

OUTPUT SELECT

Cycles through the 3 main output views:

DVD, Tuner and VCR.

Switches DVD+VCR ON and OFF.

TV/VCR

To view channels selected by the VCR

tuner or by the TV tuner.

SELECT/OK

- Acknowledges menu selection.

- Displays functions on the TV screen.

DISPLAY, CLK/CNT

Accesses On-Screen display.

Switches among the clock, tape counter

and tape remaining modes on the display.

DISC MENU

Accesses menu on a DVD disc.

b/B/v/V (left/right/up/down)

- Selects an option in the menu

To select the VCR deck’s source (Tuner,

AV1, AV2 or AV3).

CH/TRK (v/V): Selects channel of VCR.

Adjusts manually the tape’s picture on

screen.

^ꢀFORWARD (>)

DVD; Search forward*/ go to next chap-

ter or track.

SETUP/i

VCR; Advances the tape during the

STOP mode or for fast forward picture

search.

Accesses or removes DVD setup menu

and VCR menu.

TITLE ^ꢀ

Displays the disc’s Title menu, if

available.

^ꢀPLAY (H)

Starts playback.

^ꢀBACKWARD (.)

PAUSE/STEP (X) ^ꢀ

Pause playback or recording

temporarily / press repeatedly for frame-

by-frame playback.

DVD; Search backward*/ go to begin-

ning of current chapter or track or go to

previous chapter or track.

VCR; Rewinds the tape during the

STOP mode or for fast reverse picture

search.

STOP (x) ^ꢀ

Stops playback.

* Press and hold button for about two

seconds.

REC (z) ^ꢀ

Records normally or activates Instant

Timer Recording.

PROGRAM

Accesses or removes Programme menu.

0-9 numerical buttons

Selects numbered options in a menu.

CLEAR

Removes a track number on the

programme menu or a mark on the

MARKER SEARCH menu.

AUDIO ^ꢀ

Selects an audio language (DVD) or an

audio channel (CD).

^ꢀLOCK

Switch the Lock function on and off.

SUBTITLE ^ꢀ

Selects a subtitle language.

^ꢀANGLE

Selects a DVD camera angle if

available.

MARKER ^ꢀ

Marks any point during playback.

SEARCH ^ꢀ

Displays MARKER SEARCH menu.

^ꢀRETURN

Removes the setup menu.

REPEAT ^ꢀ

Repeat chapter, track, title, all.

^ꢀZOOM

Enlarges DVD video image.

RANDOM, CM-CUT ^ꢀ

- Plays tracks in random order.

- Fast forwards picture search through

30 seconds of recording.

VIDEO Plus+ ^ꢀ

To display the programme menu for

VIDEO Plus+ System programming

Note

This remote control uses the same buttons for VCR and DVD

functions (ex. PLAY).

When using a VCR, first press the VCR button.

When using a DVD, first press the DVD button.

A-B, SP/LP ^ꢀ

- Repeats sequence.

- Selects recording speed

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

AUDIO OUT (Left/Right)

Connect to an amplifier, receiver or stereo system.

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

AERIAL

Connect the aerial using this jack.

EURO AV2 DECODER

Connect to another video recorder.

DVD EXCLUSIVE OUT

VHS IN+OUT/DVD OUT

AUDIO

OUT

DIGITAL

AUDIO OUT

AERIAL

EURO AV2

DECODER

COAXIAL

EURO AV1

AUDIO/

RF.OUT

VIDEO

DVD/VHS

OUT

VIDEO OUT

Mains lead

Connect to a power

source.

EURO AV1 AUDIO/VIDEO (VHS IN+OUT/DVD OUT)

Connect to your TV set or another video recorder.

RF.OUT

Connect to your TV using this jack.

Caution

VIDEO OUT

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the DVD+VCR.

Connect to a TV with video inputs.

Note

The EURO AV2 socket is used for signal input only.

DECODER is shown but this DVD+VCR does not have

it.

Remote Control Operation Range

Remote control battery installation

Point the remote control at the remote sensor and press

the buttons.

Detach the battery cover on the rear of

the remote control, and insert two R03

^ꢀDistance: About 7m (23ft) from the front of the

remote sensor

(size AAA) batteries with

aligned correctly.

and

^ꢀAngle: About 30° in each direction of the front of the

remote sensor

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

POWER:

This DVD+VCR operates on a mains supply of

Tips

200-240V~, 50Hz

^ꢀDepending on your TV and other equipment you wish

to connect, there are various ways you could connect

the DVD+VCR.

^ꢀPlease refer to the manuals of your TV, Stereo

System or other devices as necessary to make the

best connections.

^ꢀFor better sound reproduction, connect this

DVD+VCR’s AUDIO OUT jacks to the audio in jacks

of your amplifier, receiver, stereo or audio/video

equipment. See “Connecting to Optional Equipment”

on page 11.

This appliance is supplied with BS 1363 approved

13 Amp fused mains plug. When replacing the fuse

always use a 5 Amp BS 1362 approved type.

Never use this plug with the fuse cover omitted.

To obtain a replacement fuse cover contact your

supplying dealer.

If the mains sockets in your home differ, or are not suit-

able for the type of plug supplied, then the plug should

be removed and a suitable type fitted.

If the mains plug becomes severed from the mains

lead it must be destroyed. A mains plug with bared

wires is hazardous if engaged in a mains output line

socket.

If a 13 Amp BS 1363 plug is not suitable or any

other type of plug used, then this appliance must be

protected by a 5 Amp fuse.

Caution

– Make sure the DVD+VCR is connected directly to the

TV. Set the TV to the correct video input channel.

– Do not connect the DVD+VCR’s AUDIO OUT jack to

the phono in jack (record deck) of your audio system.

Should you need to change the plug

The wires in this mains lead are coloured in accordance with

the following codes

BLUE ~ Neutral

BROWN ~ Live

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows :

The wire which is coloured BLUE must be connected to

the terminal which is marked with the letter N or coloured

BLUE or BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured BROWN

or RED.

Connecting to a TV & Satellite

Receiver

^ꢀMake one of the following connections, depending on

the capabilities of your existing equipment.

Basic connection (AV)

DO NOT connect either wire to the EARTH terminal.

Connect the EURO AV1 AUDIO/VIDEO on the rear

panel of the DVD+VCR to the scart input socket on

the TV using a SCART lead (S).

You can connect such a Satellite, Cable or Digital

set top box to the DVD+VCR (D).

Basic connection (RF)

Connect the RF aerial cable (A) from your indoor/

outdoor aerial to AERIAL jack on the rear panel of

DVD+VCR.

Connect the supplied RF aerial cable (R) from the

RF.OUT jack on the rear panel of DVD+VCR to

your television’s Aerial Input.

DVD exclusive out connection

^ꢀYou can only watch the DVD playback.

Connect the VIDEO OUT jack on the DVD+VCR’s

DVD EXCLUSIVE OUT to the video in jack on the

TV using the supplied video cable (V).

Connect the Left and Right AUDIO OUT jacks of

DVD+VCR’s DVD EXCLUSIVE OUT to the audio

left/ right in jacks on the TV using the supplied

audio cables (A2).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Cont’d)

Connecting to Optional Equipment

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT jacks on the

DVD+VCR to the audio left and right in jacks on your

amplifier, receiver or stereo system, using the supplied

audio cables (A2).

– To see the audio format of the current DVD in the On-

Screen Display, press AUDIO.

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the AV INPUT jacks on the DVD+VCR to the

audio/video out jacks on your accessory component,

using the optional audio/video cables.

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/

Video receiver equipped with a multi-channel

decoder (Dolby Digital™, MPEG 2 or DTS)

Connect the DVD+VCR’s DIGITAL AUDIO OUT

jack (COAXIAL X) to the corresponding in jack on

your amplifier. Use an optional digital (coaxial X)

audio cable.

You will need to activate the DVD+VCR’s digital

output. (See “Digital Audio Output” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD+VCR (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Video channel Set

Using your DVD+VCR for the very first time

Video channel (RF output channel) is the channel on

which your TV receives picture and sound signals from

the DVD+VCR through the RF aerial cable.

For the following steps we assume that you have just

connected your DVD+VCR for the very first time.

To make tuning TV stations an easy task your

DVD+VCR incorporates the Automatic Channel

Memory System (ACMS). This system will automatical-

ly tune and store TV channels in VIDEO Plus+ System

order to your DVD+VCR.

If you have used a SCART lead you will not have to tune

your TV, simply select the AV channel. The AV channel

is already pre-tuned for optimum video playback on

your TV.

While this is happening the clock (date & time) in the

DVD+VCR will be set automatically.

Perform the following steps only if interference appears

in the TV picture after you have moved to a different

area or a new station has started broadcasting in your

area, or if you change the connection from RF connec-

tion to AV connection, or vise versa.

Make sure that you have correctly installed your

DVD+VCR.

to turn on your DVD+VCR.

2 ^Press

Turn on DVD+VCR and TV.

If the initial Menu Screen doesn’t appear on screen,

make sure that you have tuned your TV to a video

channel. Or if this is correct it may mean that your

DVD+VCR is already tuned.

Set the vacant position 22 on your TV.

Press

on the remote control to enter the

3 _{standby mode (the clock indicator will be}

dimmed).

ACMS

Press and hold CHANNEL + or - on the

DVD+VCR for more than 4 secs.

Pr-12

ACMS

RF 22 will appear in the DVD+VCR display.

3 ^{Press OK to start the automatic tuning process.}

The following picture will be displayed on the TV

screen.

C23

C26

C30

BBC1

BBC2

ITV

Pr-12

ACMS

RF CHANNEL

SET

After storing all available TV stations your

DVD+VCR will sort them into VIDEO Plus+

System order.

If the picture is snowy, move to step 5.

If the picture is clean, press

on the DVD+VCR

to store the RF channel. The video channel is now

set.

TV Station

Programme number

Press CHANNEL + or - on the DVD+VCR to set

5 _{the video channel to a vacant position between}

22 and 68 which is not occupied by any local

station in your area.

BBC1

BBC2

ITV

CH4 (S4C)

CH5

PR01

PR02

PR03

PR04

PR05

PR06

Satellite

Note

The RF channel will not change until step 6 has been

executed.

Press i to remove the menus from the TV

screen.

Press

to store the new RF channel into the

to bring the DVD+VCR from standby

6 _DVD+VCR.

Press

to on and follow your TV manufacturers tuning

instruction manual to tune a new channel to the

DVD+VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

How to use the main menu

Tuning in TV Stations Automatically

This DVD+VCR can easily be programmed by using the

menus displayed on screen.

The menus are controlled from the Remote Control

Handset.

Should you wish to perform the Automatic Channel

Memory System (ACMS) again please follow the guid-

ance given on this page. You may tune up to 88 TV

stations into your DVD+VCR.

After automatic tuning has taken place please

check that TV stations have been placed in Video

Plus+ system order otherwise you will be unable to

successfully use this excellent feature.

Switch on your TV set and DVD+VCR by press-

ing

Press i.

The main menu will appear on the TV screen.

Press

to turn on your DVD+VCR.

Press i.

2 _{The main menu will appear on the TV screen.}

VCR

A B

Pr-12

TIME SYS-

SET

REC

ACMS

OSD Dr.

DATE

NIC

TEM

REC

OSD

OFF

Press F or G to select ACMS and press OK.

16:9

4:3

DPC

^ꢀREC

Timer recording setting (see p. 24-25).

^ꢀPR SET

Manual tuning setting (see p. 14).

^ꢀACMS

ACMS

Pr-12

ACMS

ACMS (Automatic Channel Memory System) (see

right column).

^ꢀTIME DATE

Date & clock setting (see p. 16).

SYSTEM

Press OK again to start the automatic tuning

process.

To set the Colour TV System (see p. 16).

ABC OSD

C23

C26

C30

BBC1

BBC2

ITV

To change the language setting for OSD.

You can select the language from English, Russian,

German, French and Polish.

Pr-12

ACMS

Dr.

To check a problem with your DVD+VCR (see p.

31).

F.OSD ON/OFF

To display the operational mode of your DVD+VCR

(see p. 31).

16:9/4:3

To select the aspect ratio of your TV (see p. 32).

DPC

To improve the playback picture (see p. 21).

NIC

To activate or deactivate the NICAM digital sound

(see p. 32).

After storing all available TV stations your

5 _{DVD+VCR will sort them into VIDEO Plus+}

System order.

While automatic tuning is taking place the time and

date will set automatically. If - - : - - appears in the

DVD+VCR display it means that the broadcast sig-

nal is weak and the clock was not set. Please turn

to CLOCK SET section of this book on page 16.

C23

C26

C30

C33

C35

- -

BBC1

BBC2

ITV

CH4

CH5

- - - - -

- -

3 ^{Press 1and 2to select the desired menu.}

MOVE :

DELETE :

SET

Press i to remove the menus from the TV

Press OK and press 3or 4to select.

6 _screen.

5 ^{Press i to return to a TV picture.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Searching will stop when it locates a station.

If the station transmits PDC, the station name will

be added automatically.

Tuning in TV Stations Manually

In certain areas of the country broadcast signals may

be too weak for your DVD+VCR’s automatic tuning

process to find or assign TV stations correctly.

This is important because you will only be able to

successfully record TV programmes using VIDEO Plus+

System if your DVD+VCR has stored them in a set

order. You must tune in these weaker broadcast stations

manually in order for your DVD+VCR to store them.

Remember for VIDEO Plus+ System to work correct-

ly TV stations must be stored in VIDEO Plus+

System order.

Control the fine tuning of the station by pressing ^D

or E.

C40

MFT

STATION

SET

Press ^Gto select STATION and press OK.

The TV station name list will appear.

Press i.

The main menu will appear on the TV screen.

Press ^Dor ^Eto select a station name from the

list and press OK to select it.

If your station name isn’t on the list do not press

2 ^{Press F or G to select PR SET and press OK.}

OK, but go to stage 7.

C23

MFT

STATION

BBC1

BBC2

ITV

ANGLI

C40

MFT

BORDE

CH TV

WEST

SET

GRANA

SET

Press i and press ^Dor ^Eto select the pro-

gramme number that you want to tune (for

example, PR 06). Press OK.

You can change a TV station name manually

rather than using the “standard” names.

Press ^Gand press ^Dor ^Eto select letters and

numbers for the new station name.

C23

C26

C30

C33

C35

- -

BBC1

BBC2

ITV

CH4

CH5

- - - - -

Press ^For ^Gto move back and forth between

characters. Press OK.

- -

MOVE :

DELETE :

SET

OK i

C40

MFT

STATION

CH TV

C- -

MFT

- -

STATION

SET

8 ^{Press i, confirm the station placement.}

Enter the channel number of station that you

want to tune with the numerical buttons.

C23

C26

C30

C33

C35

C40

- -

BBC1

BBC2

ITV

CH4

CH5

CH TV

- - - - -

C40

MFT

STATION

- -

MOVE :

DELETE :

SET

CHANNEL/CABLE : AV

SET

Press i to remove the menus from the TV

screen.

Your new TV station has now been tuned into your

DVD+VCR.

If you wish to manually tune other stations repeat

stages 1 - 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Changing the order of TV Stations

Deleting TV Stations

After tuning TV stations into your DVD+VCR you may

wish to change the order in which they are stored with-

out having to retune them again! The instructions given

on this page will show you how you can simply move

them into your desired order. However be warned... if

TV stations are not stored in VIDEO Plus+ system

order, VIDEO Plus+ system recordings may not take

place or record the wrong channel!

After tuning TV stations into your DVD+VCR you may

wish to delete a station.

The instructions given on this page will show you how

to easily delete any unwanted TV stations.

Press i.

The main menu will appear on the TV screen.

Press ^For ^Gto select PR SET and press OK.

Press i.

The main menu will appear on the TV screen.

Press ^For ^Gto select PR SET and press OK.

C23

MFT

STATION

BBC1

SET

C23

MFT

STATION

BBC1

Press i.

Press ^Dor ^Eto select the programme number

you want to delete (for example, PR 03).

SET

Press i.

C23

C26

C30

C33

C35

C40

BBC1

BBC2

ITV

Press ^Dor ^Eto select the programme number

you want to move (for example, PR 03).

Press ^G.

CH4

CH5

CH TV

- - - -

- -

MOVE :

DELETE :

SET

C23

C26

C30

C33

C35

C40

- -

BBC1

BBC2

ITV

CH4

CH5

CH TV

- - - - -

Press ^F.

- -

After a short while, the selected station will be

deleted.

SET

Press ^Dor ^Eto select the programme number

you want to move to (for example, PR 05).

C23

C26

C33

C35

C40

- -

BBC1

BBC2

CH4

CH5

CH TV

- - - - -

C23

C26

C33

C35

C30

C40

- -

BBC1

BBC2

CH4

MOVE :

DELETE :

CH5

ITV

SET

CH TV

- - - - -

- -

Press i to remove the menus from the TV

SET

screen.

4 ^{Press OK.}

If you wish to delete other TV stations repeat

stages 1 - 3.

The selected programme will be moved to the new

programme number.

How to select Stored TV stations:

Stored TV stations can be selected in either of two

ways.

C23

C26

C33

C35

C30

C40

- -

BBC1

BBC2

CH4

CH5

ITV

CH TV

- - - - -

Press ^Dor E to select different stations that are

- -

tuned into your DVD+VCR.

MOVE :

DELETE :

SET

You may also directly select stations using the

numerical buttons on the remote control.

Press i to remove the menus from the TV

5 _screen.

If you wish to move other TV stations repeat stages

1 - 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Setting the clock Manually

To set the colour system

The clock in your DVD+VCR controls time, day and

date settings for your DVD+VCR.

Your DVD+VCR is equipped with dual colour standard,

you can play back a tape in PAL and MESECAM.

During playback your DVD+VCR detects the colour sys-

tem automatically.

If there is any colour problem please select the colour

system manually.

For VIDEO Plus+ system to work correctly the cor-

rect time and date must be set. The clock is set auto-

matically during ACMS (Automatic Channel Memory

System) when your DVD+VCR detects a channel that

broadcasts a Teletext signal.

If the broadcast signal is weak the clock will not be set

and will require setting manually.

Press i.

The main menu will appear on the TV screen.

Press i.

Press ^For ^Gto select TIME DATE and press

OK.

The auto adjust mode can be set to “OFF” by

VCR

A B

Pr-12

TIME SYS-

SET

REC

ACMS

OSD Dr.

DATE

NIC

TEM

REC

OSD

OFF

pressing D or E if you want to set the time man-

16:9

4:3

DPC

ually.

Press ^For ^Gto select the SYSTEM.

Press OK.

AUTO ADJUST

- -

TIME

DATE

VCR

Press OK.

A B

Pr-12

ACMS

SYS-

TEM

TIME

REC

OSD

Dr.

DATE

SYS-

TEM

NIC

Use the numerical buttons or press L/M or ^F/^G

on the remote control to alter the HOURS, MIN-

UTES, DAY, MONTH and YEAR.

OSD

16:9

4:3

DPC

OFF

Press ^Dor ^Eto select according to the

COLOUR system used.

Please note your DVD+VCR uses a 24-hour clock.

e.g. 1pm will be displayed as 13:00.

The day of the week will appear automatically when

you enter the year.

VCR

A B

AUTO

PAL

Pr-12

ACMS

SYS-

TEM

TIME

REC

OSD

Dr.

DATE

SYS-

TEM

MESECA_NM_IC

OSD

OFF

16:9

DPC

4:3

HH MM DD MM YY

- - - - -

- -

AUTO:

TIME

DATE

Allows PAL or MESECAM signals to be distinguished

automatically.

If you make a mistake press ^For ^Gand enter

the correct details.

PAL:

Use when receiving PAL signals or use when playing

back a tape recorded in PAL system.

MESECAM:

Use when receiving MESECAM signals or use when

playing back a tape recorded in MESECAM system

HH MM DD MM YY

02 MON

TIME

DATE

Press i to remove the menus from the TV

screen.

Press i to remove the menus from the TV

screen.

Your new clock settings are stored and will appear

on your DVD+VCR’s Display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD part

General Explanation

This manual gives the basic instructions for operating

the DVD+VCR. Some DVDs require specific operation

or allow only limited operation during playback. When

Temporary Feedback Field Icons

TITLE

Repeat Title

CHAPT

Repeat Chapter

TRACK

Repeat Track (non-PBC Video CDs only)

this occurs, the symbol

appears on the TV screen,

ALL

Repeat All Tracks (non-PBC Video CDs only)

indicating that the operation is not permitted by the

DVD+VCR or is not available on the disc.

Repeat A-B

OFF

Repeat Off

On-Screen Display

The general playback status can be displayed on the

Resume play from this point

Action prohibited or not available

TV screen. Some items can be changed on the menu.

On-screen display operation

Notes

ꢀ Some discs may not provide all of the below On-

Screen Display.

Press DISPLAY during playback.

ꢀ If no button is pressed for 10 seconds, the On-Screen

Display disappears.

Press 3/4to select an item.

The selected item will be highlighted.

Press 1/2to change the setting of an item.

The numerical buttons can be also be used for set-

ting numbers (e.g., title number). For some func-

tions, press SELECT/OK to execute the setting.

DVD

Items

Function (Press 3

4to select desired item)

Selection Method

Title Number

Shows the current title number and total number of

, or

1/3

1/12

titles, and skips to the desired title number.

Numeric, SELECT/OK

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or

Numeric, SELECT/OK

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

Numeric, SELECT/OK

0:16:57

Audio language

and Digital Audio

Output mode

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

ENG

6 CH

AUDIO,

Subtitle language

Shows the current subtitles language, and

OFF

1/1

SUBTITLE,

ANGLE,

changes the setting.

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

Sound

Shows the current sound mode, and

changes the setting.

NORM.

VCD1.1

VCD2.0

Items

Function (Press 3

4to select desired item)

Selection Method

Track Number

Shows the current track number, total number of tracks

and PBC On mode, and skip to the desired track number.

, or

1/4

Numeric, SELECT/OK

Time

Shows the elapsed playing time (Display only)

0:16:57

–

Audio Channel

Sound

Shows the audio channel, and

STER.

AUDIO,

changes the audio channel.

Shows the current sound mode, and

changes the setting.

NORM.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Menu Language

Select a language for the setup menu. This is the menu

you see when you press SETUP.

Initial Settings

You can set your own Personal Preferences on the

DVD+VCR.

English

Spanish

French

German

Italian

Disc Audio

General Operation

Disc Subtitle

Disc Menu

Press SETUP.

Rating

The setup menu appears.

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

German

Spanish

Italian

Country code

TV Aspect

Others

Menu Language

Chinese

Polish

Digital Audio Output

Others

Hungarian

Russian

Other – – – –

Picture

TV Aspect DVD

Press 3/4 to select the desired item.

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

The screen will show the current setting for the

selected item, as well as alternate setting(s).

While the desired item is selected, press 2, then

3/4 to select the desired setting.

Press SELECT/OK to confirm your

selection.

Some items require additional steps.

16:9 Wide: Select when a 16:9 wide TV is connected.

Press SETUP, RETURN or PLAY (H) to exit the

setup menu.

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

Language

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Disc Language DVD

Select a language for the disc’s Menu, Audio, and

Subtitle.

Others

Original : The original language set for the disc is selected.

Other : To select another language, press numerical buttons to

enter the corresponding 4-digit number according to the lan-

guage code list on page 37. If you enter the wrong language

code, press CLEAR.

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

German

Spanish

Italian

Country code

TV Aspect

Menu Language

Chinese

Polish

Digital Audio Output

Others

Hungarian

Russian

Other – – – –

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Sound

Others

Digital Audio Output

The DRC, Vocal and PBC settings can be changed.

ꢀ Press 3/4to select the desired item and press

SELECT/OK. The setting of the selected item is

changed between On and Off.

Each DVD disc has a variety of audio output options.

Set the DVD+VCR’s Digital Audio Output according to

the type of audio system you use.

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”

if you connected the DVD+VCR’s DIGITAL AUDIO OUT

jack to a Dolby Digital decoder (or an amplifier or other

equipment with a Dolby Digital decoder).

Stream/PCM: Select “Stream/PCM” if you connected

the DVD+VCR’s DIGITAL AUDIO OUT jack to an

amplifier or other equipment with a DTS decoder, Dolby

Digital decoder or MPEG decoder.

DRC Off

Vocal On

PBC On

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

PCM: Select when connected to a 2-channel digital

stereo amplifier. The DVD+VCR output sounds in the

PCM 2ch format when you play a DVD video disc

recorded with a Dolby Digital, MPEG1, or MPEG2

recording system.

Dynamic Range Control (DRC)

With the DVD format, you can hear a programme’s

soundtrack in the most accurate and realistic presenta-

tion possible, thanks to digital audio technology.

However, you may wish to compress the dynamic range

of the audio output (the difference between the loudest

sounds and the quietest ones). Then, you may listen to

a movie at a lower volume without losing clarity of

sound. Set DRC to On for this effect.

DOLBY

_DIGITAL/PCM

Stream/PCM

PCM

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Sample Freq.

48KHz

Menu Language

Progressive Scan

Digital Audio Output

96KHz

Vocal

Others

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into a normal stereo sound.

Sample Frequency

To change the Sample Frequency setting, first select

the desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz

signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Parental Control

DVD

Country Code

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list

(See “Country Code List”, page 38).

Rating DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country-dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Code Set

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Disc Audio

Disc Subtitle

Disc Menu

Select Country Code using 3/4on the setup

menu.

Rating

Country Code

TV Aspect

2 ^{While Country Code is selected, press 2.}

Menu Language

Progressive Scan

Digital Audio Output

Unlock

Change

Others

3 ^{Follow step 3 of “Rating” on left.}

4 ^{Select the first character using 3/4.}

Select “Rating” on the Setup menu using 3/4.

Shift the cursor using 1/2 and select the second

character using 3/4.

2 ^{While “Rating” is selected, press 2.}

Press SELECT/OK to confirm your country code

selection, then press SETUP to exit the menu.

When you have not entered a password yet.

Enter a 4-digit password using the numerical but-

Note

tons to create a personal 4-digit security password,

then press SELECT/OK. Enter the 4-digit password

again and press SELECT/OK to verify.

When you have already entered a password;

Enter a 4-digit password using the numbered but-

tons to confirm the personal 4-digit security pass-

word, then press SELECT/OK.

Confirmation of the 4-digit password is necessary when

the code is changed (see “Changing the 4-digit code”

below ).

Changing the 4-digit code

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old code, then press SELECT/OK.

3 Select Change using the 3/4buttons then press

SELECT/OK.

4 Enter the new 4-digit code, then press SELECT/OK.

5 Enter exactly the same code a second time and veri-

fy by pressing SELECT/OK.

If you make a mistake before pressing SELECT/OK, press

CLEAR and enter 4-digit security password again.

Select a rating from 1 to 8 using 3/4. One (1)

has the least playback restrictions. Eight (8) has

the most playback restrictions.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

6 Press SETUP to exit the menu.

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the

DVD+VCR, all disc scenes with the same rating or

lower will be played. Higher rated scenes will not be

played unless an alternative scene is available on

the disc. The alternative must have the same rating

or a lower one. If no suitable alternative is found,

playback will stop. You must enter the 4-digit pass-

word or change the rating level in order to play the

disc.

If you forget your 4-digit code

If you forget your password, to clear the current pass-

word, follow the procedure below.

1 Press SETUP to display the setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

The 4-digit password is cleared.

Enter a new code as shown above to the left (Rating).

Press SELECT/OK to confirm your rating selec-

tion, then press SETUP to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

During playback or still picture press ^For ^G.

You can reach the following playback speeds.

(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,

7xplay)

To switch off the slow motion and shuttle, press the

desired function.

During slow motion and shuttle, the noise bars may

appear on the picture according to the status of

tape.

Playing a tape

You will only be able to load and eject video cassettes

when your DVD+VCR is plugged into the mains.

Your DVD+VCR may also play back recordings from

NTSC tapes (on PAL TV).

Getting a better picture

When a cassette is inserted and playback started, the

automatic tracking function works to get the best possi-

ble picture automatically. If the quality of the recording is

poor, repeatedly press either CH/TRK (v/V) on the

remote control or CHANNEL (+/-) on the front panel to

manually adjust the tracking until any distortions have

been removed. Press numbered button 0 on the remote

control to switch automatic tracking back on again.

If distortions can be seen in the picture, reduce

them with CH/TRK (v/V) on the remote control.

Press STOP (x) to end playback.

Press EJECT.

If the end of the tape is reached, your DVD+VCR

will stop playback automatically, rewind, stop, eject

the tape.

Make sure that you have correctly connected

your DVD+VCR as described earlier in this

book.

Turn on your TV.

CM (Commercial Message) CUT:

When playing back tapes, this feature lets you skip

through commercial breaks by fast-forwarding, and

then resume normal playback.

While tape is playing press CM-CUT on the remote

control to skip commercial (or other programme materi-

al).

Press

to turn on your DVD+VCR.

Insert the video cassette into your DVD+VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

Repeatedly press CM-CUT to skip:

The tape will fast forward picture search through 30

seconds of recording.

Press PLAY (H) to start playing your tape.

If you load a video cassette which has had its

record protection tab removed, playback of the

cassette will start automatically.

1 Press

30 seconds

60 seconds

90 seconds

120 seconds

150 seconds

180 seconds

2 Presses

3 Presses

4 Presses

5 Presses

6 Presses

AUTO TRACKING

Your DVD+VCR will automatically adjust the track-

ing to give the best picture quality.

Press PAUSE/STEP (X) to still a picture.

Press PAUSE/STEP (X) repeatedly to advance

the tape frame by frame.

DPC (Digital Picture Control):

If you hold down FORWARD, the picture will be

slowed down at about 1/19 times the normal

playback.

This feature automatically improves playback picture

quality by adjusting your DVD+VCR to the condition of

the tape.

Tapes can be paused for up to 5 minutes. After 5

minutes your DVD+VCR will stop the tape to pre-

vent damage to the tape or your DVD+VCR .

Still picture quality can be improved slightly by

pressing CH/TRK (v/V) on the remote control.

Press i.

2 ^{Press F or G to select DPC and press OK.}

4 ^{Press PLAY (H) to continue playing your tape.}

Picture search:

VCR

OFF

A B

Pr-12

ACMS

During playback press either FORWARD or BACK-

WARD. This will enable you to rapidly wind the tape

(7 times normal playback) while seeing where you

are on the tape.

SYS-

TEM

TIME

NIC

SET

REC

SOFT

OSD

SHARP^DATE

DPC

OSD

Dr.

16:9

4:3

OFF

DPC

Press ^Dor ^Erepeatedly to select: OFF, SOFT

or SHARP.

Logic search:

Please note you may set DPC only when playing a

tape.

During fast forward or rewind press and hold FOR-

WARD or BACKWARD. The picture will be played

back at 7 times normal playback speed.

Press i to remove the menus from the TV

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

The DVD+VCR allows you to make recordings using a

variety of simple methods:

Quick Set Recording (QSR): Start recording immedi-

ately for a set period of time or until the video cassette

runs out.

VIDEO Plus+ System Recording greatly simplifies

entering the date, channel, start and end times of a

Timer Recording.

Timer Recording: You may record at a later time (up to

1 month from the present). Up to 7 of these

automatic recordings may be set.

Press SP/LP if you wish to record in Long Play

or Standard Play.

SP will produce improved picture and sound quality,

however LP will provide twice as much recording

time as SP.

Press REC (z) to start recording.

RECORD will appear on the TV screen.

Press REC several times. Each successive press

will increase the record time by 30 minutes until you

reach a maximum of 9 hours.

Press PAUSE/STEP (X) to avoid recording

unwanted scenes.

Press PAUSE/STEP (X) to continue recording.

Tapes can be paused for up to 5 minutes; RECP

will be displayed when a tape is paused. After 5

minutes your DVD+VCR will stop recording to pre-

vent damaging the tape or your DVD+VCR.

The DVD+VCR incorporates Long Play (LP) which

enables you to record up to twice the amount of time on

a video cassette. For example an E-180 will record up

to 180 minutes using Standard Play (SP); using LP you

will be able to record up to 360 minutes. Please note

there will be a slight loss in picture and sound quality

when using LP.

Press STOP (x) to end recording.

Press EJECT (Z).

EJECT will appear on the TV screen for a few

seconds.

Quick Set Recording (QSR)

Notes

Make sure that you have correctly connected

ꢀ If you do not wish to record on a tape (this can happen

quite easily by accident!) remove the protection tab on

the back edge of the video cassette.

your DVD+VCR as described earlier in this

book.

Press

to turn on your DVD+VCR.

ꢀ It is possible to record on a video cassette with the

record protection tab removed by covering the hole

with self adhesive tape.

ꢀ Remember you can record one programme while

watching another by starting your instant recording,

pressing TV/VCR to select TV mode and then select-

ing a different channel on your TV.

ꢀ If you press PAUSE/STEP (X) during QSR, the

DVD+VCR will enter the record pause mode and QSR

is cancelled.

Insert a video cassette with protection tab into

your DVD+VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

Press CH/TRK (v/V) to select the programme

number you wish to record.

You may also directly select programme numbers

using the numerical buttons on the remote con-

trol.

If you wish to record directly from either of the

SCART sockets or AV INPUT sockets, repeated-

ly press AV until the socket you wish to record

from is displayed.

AV 1 for recording from EURO AV1 socket on the

rear of your DVD+VCR.

AV 2 for recording from EURO AV2 socket on the

rear of your DVD+VCR.

AV 3 for recording from AV INPUT sockets on the

front of your DVD+VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

BBC1 12

DATE

VIDEO Plus+ System recording

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

VIDEO Plus+ System greatly simplifies entering the

date, channel, start and end times of a Timer recording

by simply entering a PlusCode programming number.

The PlusCode programming number is published in

most TV guide magazines; they can vary from one to

nine numbers in length.

PLEASE NOTE! VIDEO Plus+ System can only work

successfully if TV channels have been tuned and

stored in the order described on page 12 of this

instruction manual.

If you want to record from either of the SCART

sockets or AV INPUT on the front, repeatedly

press AV for the correct display (AV1, AV2 or

AV3).

Press ^Gand press ^Dor ^Eto switch PDC on or

off.

Make sure that TV channels have been tuned

If you are recording from stations that do not broadcast

PDC switch PDC off! ( * symbol will disappear on the TV

screen). Remember only certain stations transmit PDC.

and stored.

Insert a video cassette with protection tab into

your DVD+VCR.

DATE

The video cassette should have the window side

facing up and the arrow facing away from you.

2 ^{Press VIDEO Plus+.}

BBC1 12

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

VPS/PDC

Press ^Gto select the recording speed and

press ^Dor ^Eif you wish to record in SP, IP or

LP.

SP will produce improved picture and sound quality,

however LP will provide twice as much recording time

as SP.

- - - - - - - - -

ONCE

VIDEO PLUS+

0~9,

REC

Press ^Dor ^Eto select the recording type.

ONCE: To record once.

WEEKLY: To record at the same time every week.

DAILY: To record every day (except Saturday and

Sunday) at the same time.

Check that the timer event details are correct.

Press i to save your settings.

DATE

BBC1 12

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

- - - - - - - - -

DAILY

VIDEO PLUS+

0~9,

REC

If PLEASE CHECK is displayed, you have entered

incorrect information and will need to re-enter the

data.

Press the numerical buttons to enter the

PlusCode programming number of the TV

programme that you wish to record.

If you make a mistake press F then enter the revised

number.

Press i to remove the menus.

9 _{If you want to make other VIDEO Plus+ system}

recordings repeat stages 2 - 8.

Press to switch your unit Standby.

10 _{TIMER will appear in the DVD+VCR’s display while}

your DVD+VCR waits to make the recording.

If you want to watch a DVD during timer recording,

press TV/VCR on the remote control to select VCR

mode.

123456789

DAILY

0~9,

VIDEO PLUS+

REC

Press OK.

The recording details of your programme will be

displayed.

Intelligent LP Recording

If PLEASE CHECK is displayed it means that you have

entered the wrong PlusCode programming number,

entered the PlusCode programming number incorrectly or

the PlusCode programming number has been printed

incorrectly in the TV guide. If “- -” is displayed in “PR”, you

have to enter the programme number of the station you

want to record from.

When you set the tape speed to “IP”, the DVD+VCR

automatically switches to LP mode to allow complete

recording if there is not enough tape to record the entire

programme while timer- recording in SP mode.

It is not possible to set the tape speed to “IP” with

“VPS/PDC” set to “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Press the numerical buttons to enter the date of

the programme.

Timer recording using On Screen

Display

If you press OK before entering the date you may

select one of the following automated

recording features. Press ^For G to select, then

press OK to confirm.

If you choose not to use VIDEO Plus+ System

Recording, you can set timer recordings manually.

You may set up to seven timer record events within one

month of the current date.

PLEASE NOTE! before setting the timer make sure

that you have set the DVD+VCR clock correctly and

you know which channels you have tuned to TV sta-

tions on your DVD+VCR.

DLY To record every day (except Saturday and

Sunday) at the same time.

Weekly To record at the same time every week.

CH4

- -

DATE

- -

- -: - -~ - -: - -

In a stage 4, if you want to record from either of the

SCART sockets or AV INPUT on the front, press AV.

- -: - -~ - -: - - SP

- -: - -~- - : - - SP

DLY SU MO TU WE TH FR SA

Insert a video cassette with protection tab into

your DVD+VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

Press the numerical buttons to enter the record-

ing start and end times of the programme that

you wish to record.

Press i.

Press ^For ^Gto select REC and press OK.

Please note your DVD+VCR uses a 24-hour clock.

e.g. 1pm will be displayed as 13:00.

You may also select the start and end times by

pressing L or M.

If all timer record events are full press ^Dor E to

select the event that you wish to remove and

replace.

Press ^Fto delete the event.

CH4

- -

DATE

- -

19:00~ 20:00

- -: - -~ - -: - -

- -: - -~- - : - -

DATE

- -

- -: - -~ - -: - -

- -: - -~- - : - -

- -

DELETE:

Press ^Gand press ^Dor ^Eto switch PDC on or

off.

3 ^{Press OK to start setting the timer record event.}

If you are recording from stations that do not broadcast

PDC switch PDC off! ( * symbol will disappear on the TV

screen). Remember only certain stations transmit PDC.

DATE

- -

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Press

to select the recording speed and

press ^Dor ^Eif you wish to record in SP, IP or

LP.

• IP (Intelligent LP recording) on page 23.

Check that the timer event details are correct.

Press i to save your settings.

Press the numerical buttons to enter the station

that you wish to record.

DATE

CH4

- -

19:00~20:00

- -: - -~ - -: - -

- -: - -~- - : - -

When selecting stations 1 - 9, press 0 first, then the chan-

nel number; for example Stations 3 - 03. You may also

select Channels by pressing L or M. Once selected press

- -

If you want to record from either of the SCART sockets or

AV INPUT on the front, repeatedly press AV for the cor-

rect display (AV1, AV2 or AV3).

If PLEASE CHECK is displayed, you have entered

incorrectly and will need to re-enter the data.

CH4

- -

DATE

- -

Press i to remove the menus.

- -: - -~ - -: - -

- -: - -~- - : - -

9 _{If you want to make other timer recordings repeat}

stages 2 - 8.

Press to switch your DVD+VCR Standby.

10 _{TIMER will appear in the DVD+VCR’s display while}

your DVD+VCR waits to make the recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

If Timer record events Overlap...

Change (Deleting) the Timer Programme

Do not overlap programmes, since overlapping portions

of the conflicting programmes will not be recorded.

Earlier recording times have priority over later recording

times as shown in the diagram.

If at a later date you wish to delete or change any of

the settings in timer event memory you may do so with-

out having to enter all the timer event information again.

Simply display the timer event screen. Press ^Dor E to

select the event that you wish to delete or change.

Press ^Fto delete the event...or

Press OK to change; then press ^For G to select;

Station, Date, Start and End times, PDC and LP. Press

D or E to enter the correct information.

Example:

Programme 1 will be recorded in its entirety, but only

the last 30 minutes of Programme 2 will be recorded.

PROGRAMME 1

The Programme Delivery Control (PDC)

17:00

16:00

The Programme Delivery Control (PDC) adjusts the

start and end times of a timer record event. This can be

particularly useful with sports events which may run

over into extra time. The PDC signal is

17:30

16:30

transmitted by the broadcaster and this controls your

video recorder’s timer.

PROGRAMME 2

Currently only a limited number of TV companies trans-

mit PDC signals.

(This portion will not be recorded.)

Please make sure that when recording from chan-

nels that do not broadcast PDC that you turn PDC

OFF.

If two programmed timer recordings overlap at midnight

00:00 a.m., programme 2 will not be recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Playing DVD and Video CD

General Features

VCD2.0

VCD1.1

Playback Setup DVD

Note

Unless stated otherwise, all operations described use

the remote control. Some features may also be avail-

able on the Setup menu.

ꢀ Turn on the TV and select the video input source con-

nected to the DVD+VCR.

ꢀ Audio system: Turn on the audio system

and select the input source connected to the

DVD+VCR.

1/3

Moving to another TITLE DVD

Press OPEN/CLOSE (Z) to open the disc tray.

When a disc has more than one title, you can move to

another title as follows:

^ꢀPress DISPLAY when playback is stopped, then

press the appropriate numerical buttons (0-9) to

select a title number.

Load your chosen disc in the tray, with the label

facing up.

When a double-sided DVD is inserted, make sure

the side you want to play is facing up.

Moving to another CHAPTER/TRACK

Press OPEN/CLOSE (Z) to close the tray.

READING appears on the TV screen, and playback

starts automatically. If playback does not start,

press PLAY (H).

In some cases, the disc menu might appear

instead.

1/12

1/3

VCD1.1

DVD

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

ꢀ Press BACKWARD (.) or FORWARD (>)

briefly during playback to select the next chapter/track

or to return to the beginning of the current

chapter/track.

^ꢀPress BACKWARD (.) twice briefly to step back to

the previous chapter/track.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD which contains a menu.

DVD

^ꢀTo go directly to any chapter during DVD playback,

press DISPLAY. Then, press 3/4to select C

(chapter) (or for a Video CD, select T for track). Then,

enter the chapter/track number using the numerical

buttons (0-9).

Use the 1/2/3/4 to select the title/chapter you want to

view, then press SELECT/OK to start playback.

Press TITLE or DISC MENU to return to the menu

screen.

VCD2.0

^ꢀUse the numerical buttons to select the track you

want to view.

Note

For two-digit numbers, press the buttons in rapid

Press RETURN to return to the menu screen.

^ꢀMenu settings and the exact operating procedures for

using the menu may differ depending on the disc.

Follow the instructions on each menu screen.

You also may set PBC to Off under setup. See page

19.

succession.

VCD2.0

VCD1.1

Slow Motion DVD

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will now go into PAUSE mode.

2 Press BACKWARD (.) or FORWARD (>)

during pause mode.

The DVD+VCR will enter SLOW mode.

3 Use BACKWARD (.) or FORWARD (>) to

select the required speed: t 1/16, t 1/8, t 1/4 or

t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T

1/2 (forward).

Notes

– If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control”, on page 20).

– DVDs may have a region code.

4 To return to playback, press PLAY (H).

– Your player will not play discs that have a region code

different from your player. The region code for this

player is 2 (two).

Note

Slow motion playback in reverse is not applicable for

Video CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Video CDs - Repeat Track/All/Off

General Features (continued)

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

Still Picture and Frame-by-frame playback

2 To repeat the disc currently playing, press REPEAT a

second time.

The Repeat All icon appears on the TV screen.

VCD2.0

VCD1.1

DVD

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will now go into PAUSE mode.

2 With a DVD, you can advance the picture frame by

frame by pressing PAUSE/STEP (X) repeatedly on

the remote control.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

3 To return to playback, press PLAY (H).

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Repeat function. See page 19.

VCD2.0

VCD1.1

Search DVD

1 Press and hold BACKWARD (.) or FORWARD

(>) for about two seconds during playback.

The player will now go into SEARCH mode.

VCD2.0

VCD1.1

Repeat A-B DVD

OFF

2 Press and hold BACKWARD (.) or FORWARD

(>) repeatedly to select the required speed: mX2,

mX4, mX16, mX100 (backward) or MX2,

MX4, MX16, MX100 (forward).

With a Video CD, the Search speed changes: mX2,

mX4, mX8 (backward) or MX2, MX4, MX8

(forward).

To repeat a sequence in a title:

1 Press A-B at your chosen starting point.

appears briefly on the TV screen.

2 Press A-B again at your chosen end point.

A-B appears briefly on the TV screen, and the repeat sequence

begins (A-B appears in the display window).

3 To exit SEARCH mode, press PLAY (H).

3 To cancel the sequence, press A-B.

VCD1.1

Random Karaoke DVD

0:16:57

- : - - : - -

Time Search DVD

1 Press RANDOM during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

The Time Search function allows you to start playing at

any chosen time on the disc.

2 To return to normal playback, press RANDOM until

“NORMAL” appears on the TV screen.

1 Press DISPLAY during playback. The on-screen dis-

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

Tips

By pressing BACKWARD (.) or FORWARD (>) dur-

ing Random playback, the unit selects another title

(track) and resumes Random playback.

2 Within 10 seconds, press 3/4to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

3 Within 10 seconds, use the number buttons to enter

the required start time. Enter hours, minutes, and sec-

onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

Note

This function only works with DVD Karaoke discs and

video CD without PBC.

4 Within 10 seconds, press SELECT/OK to start playing

at the start time.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

VCD2.0

VCD1.1

Repeat DVD

ALL

OFF

CHAPT

TITLE

TRACK

DVD Video Discs - Repeat Chapter/Title/Off

NORM.

3D SUR

3D Surround DVD

1 To repeat the chapter currently playing, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

This unit can produce a 3D Surround effect, which sim-

ulates multi-channel audio playback from two conven-

tional stereo speakers, instead of the five or more

speakers normally required to listen to multichannel

audio from a home theater system.

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

1 Press DISPLAY during playback.

2 Use v/V to select the sound option (

The sound option will be highlighted.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

NORM.

3 Use b/B to to select “3D SUR”.

To turn off the 3D Surround effect, select “NORM”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features (continued)

Special DVD Features

DVD

VCD2.0

VCD1.1

Zoom DVD

Checking the contents of DVD Video

discs: Menus

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use the 1/2/3/4 to highlight your selection,

then press SELECT/OK.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six times.

2 Use the 1/2/3/4 to move through the zoomed pic-

ture.

DVD

Title Menu

3 Press CLEAR to resume normal playback or return to

the paused image.

1 Press TITLE.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language

Notes

ꢀ The zoom function may not work for some DVDs.

ꢀ The zoom function may not work on multi-angle

scenes.

and subtitle options, and chapters for the title.

3 To remove the title menu, press TITLE again.

VCD2.0

VCD1.1

DVD

Marker Search

DVD

Disc Menu

MARKER SEARCH

1/9

1 Press DISC MENU.

The disc menu is displayed.

You can start playback from a memorized point. Up to

nine points can be memorized.

2 To remove the disc menu, press DISC MENU again.

To enter a mark, follow these steps.

1/1

DVD

1 During disc playback, press MARKER when

playback reaches the spot that you want to

memorize.

Camera Angle

If the disc contains scenes recorded at different camera

angles, you can change to a different camera angle

during playback.

^ꢀPress ANGLE repeatedly during playback to select a

desired angle.

The Marker icon will appear on the TV screen briefly.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

The number of the current angle appears on the display.

To Recall a Marked Scene

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

DVD

Changing the Audio Language

ENG

2 Within 10 seconds, press 1/2 to select a Marker num-

ber that you want to recall.

Press AUDIO repeatedly during playback to hear a dif-

ferent audio language or audio track.

3 Press SELECT/OK.

Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press

SEARCH.

ENG

DVD

Subtitles

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

To clear a Marked Scene

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

Note

2 Press 1/2 to select the Marker number that you want

to erase.

appears, the feature is not available on the disc.

3 Press CLEAR.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

5 To remove the MARKER SEARCH menu, press

SEARCH.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3 Discs

Playing Audio CD and MP3 discs

1 Press and hold BACKWARD . or FORWARD >

for about two seconds during playback.

The player will now go into SEARCH mode.

The DVD+VCR can play MP3 formatted recordings on

CD-R or CD-RW discs.

Before playing MP3 recordings, read the notes on MP3

Recordings on page 33.

2 Press and hold BACKWARD . or FORWARD >

repeatedly to select the required speed: mX2,

mX4, mX8 (backward) or MX2, MX4, MX8

(forward).

Insert a disc and close the tray.

The menu appears on the TV screen.

MP3

Program

3 Search speed and direction are indicated on the

menu screen.

TRACK 1.MP3

TRACK 1

TRACK 2.MP3

TRACK 3.MP3

TRACK 4.MP3

TRACK 5.MP3

TRACK 6.MP3

TRACK 7.MP3

TRACK 8.MP3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

4 To exit SEARCH mode, press PLAY.

Clear All

OFF

Clear All

NORM.

56:35

0:56:35

STER.

Random

Audio CD menu

MP3 menu

1 Press RANDOM during playback or when playback is

stopped.

The unit automatically begins Random Playback and

“RAND.” appears on the menu screen.

Press 3/4to select a track then press PLAY

(H).

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display.

Playback will stop at the end of the disc.

2 To return to normal playback, press RANDOM repeat-

edly until “RAND.” disappears on the menu screen.

To stop playback at any other time, press STOP

(x).

OFF

Repeat A-B

To repeat a sequence.

MP3

1 During disc playback, press A-B at your chosen start-

Pause

ing point.

1 Press PAUSE/STEP (X) during playback.

The Repeat icon and “A ” appears on the menu screen.

2 To return to playback, press PLAY (H) or press

PAUSE/STEP (X) again.

2 Press A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

MP3

Moving to another Track

3 To exit the sequence and return to normal play, press

A-B again.

The Repeat icon and “OFF” appear on the menu screen.

^ꢀPress BACKWARD (.) or FORWARD (>) briefly

during playback to go to the next track or to return to

the beginning of the current track.

3D SUR

NORM.

^ꢀPress BACKWARD (.) twice briefly to step back to

the previous track.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

^ꢀIn case of audio CD, to go directly to any track, enter

the track number using the numerical buttons (0-9)

during playback.

MP3

Repeat Track/All/Off

1 Press DISPLAY during playback.

1 To repeat the track currently playing, press REPEAT.

NORM.

2 Use b/B to select the sound option (

The sound option will be highlighted.

The Repeat Track icon appears on the menu screen.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat ALL icon appears on the menu screen.

3 Use v/V to to select “3D SUR”.

To turn off the 3D Surround effect, select “NORM.”.

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat OFF icon appears on the menu screen.

STER.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (STEREO, LEFT, or RIGHT).

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

Programmed Playback

MP3

Programmed Playback with Audio CD

and MP3 Discs

Programme allows you to store your favorite tracks for a

particular disc in the player memory.

Programmed Playback with Video CD

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Programme function. See page

19.

Programme can contain 32 tracks (Audio CD) or 60

tracks (MP3 disc).

Insert Video CD and close the tray.

Insert the disc and close the tray.

The menu is displayed on the TV screen.

VCD

Program

TRACK 1

Press PROGRAM during playback or in the stop

mode to enter the Programme Edit mode.

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

The

mark will appear to the right of the word

Programme on the right side of the menu screen.

Clear All

Note

Press PROGRAM while playback is stopped.

Press PROGRAM to exit the Programme Edit mode; the

The VCD Programme menu will appear.

mark will disappear.

Note

Press 3/4to select a track, then press

SELECT/OK to place the selected track on the

Programme list.

Press RETURN or PROGRAM to exit the Programme

menu.

Follow steps 3-7 of “Programmed Playback with

Audio CD and MP3 Disc” on left.

Repeat step 3 to place additional tracks on the

Programme list.

Program

MP3

Program

Repeat Programmed Tracks

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

TRACK 1.MP3

TRACK 8.MP3

TRACK 2.MP3

TRACK 4.MP3

TRACK 3.MP3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

TRACK 2.MP3

TRACK 3.MP3

TRACK 4.MP3

TRACK 5.MP3

TRACK 6.MP3

TRACK 7.MP3

TRACK 8.MP3

^ꢀTo repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

^ꢀTo repeat all tracks on the programme list, press

REPEAT a second time.

Clear All

NORM.

Clear All

OFF

0:00:14

STER.

56:35

The Repeat All icon appears on the menu screen.

^ꢀTo cancel Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the menu screen.

Audio CD menu

MP3 menu

Press 2.

Erasing a Track from Programme List

1 Press PROGRAM during playback or in the stop

mode to enter the Programme Edit mode.

The programmed track you selected last is highlighted on

the Programme list.

Press 3/4to select the track you want to start

playing.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

The

mark will appear.

2 Press 2 to move to the Programme list.

3 Use 3/4to select the track that you wish to erase

from the Programme list.

Press PLAY (H) to start.

4 Press CLEAR.

Playback begins in the order in which you programmed

the tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Programme

list have played once.

The track will be erased from the Programme list.

Erasing the Complete Programme List

1 Follow steps 1-2 of “Erasing a Track from Programme

List” as above.

2 Use 3/4to select “Clear All”, then press SELECT/OK.

The complete Programme for the disc will be erased.

The programmes are also cleared when the disc is removed.

To resume normal playback from programmed

playback

Press and hold PROGRAM for 3 seconds until “PROG.”

indicator disappears in the display window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation - VCR part

On Screen Display

Child Lock

You may easily display the current time or tape counter

and amount of tape left, day, month, year, day of week,

programme channel, tape speed and operational mode

of your DVD+VCR on the TV screen.

The control buttons on the front of the DVD+VCR can

be switched off so that your DVD+VCR can only be

operated using the remote control.

If a recording is taking place these On Screen Displays

will not be recorded onto the tape.

Press LOCK.

will appear in the display window.

Press CLK/CNT to display.

None of the buttons on the front of your DVD+VCR

will work.

VCR

Channel

STOP

BBC1

STEREO

NICAM

If any buttons on the front of your DVD+VCR are

Function/

STEREO

Programme

Tape Speed

pressed

onds.

will flicker in the display for a few sec-

Clock/Tape

Counter &

Amount of

Tape Left

Day/Month/

Year/Day of

Week

24. 04. 02 WED

12:00

2 ^{Press LOCK again to switch off the child lock.}

will disappear in the display.

Press CLK/CNT repeatedly to display the tape

counter.

During playback or recording, the amount of tape

Friendly User Guide (Video Doctor)

left is displayed with the tape counter.

This feature informs you that there is a problem with

your DVD+VCR. These error messages will appear on

the TV screen.

After 3 seconds the display will clear from the

TV screen, leaving only the clock or tape count-

er and amount of tape left on the TV screen.

Press CLK/CNT again to remove all displays

from the TV screen.

VCR

VIDEO DOCTOR

Dr.

HEAD STATUS

TAPE STATUS

NO. OF TIMER PROGRAMME

NEXT TIMER PROGRAMME

The amount of tape left will only be accurate on

E-180 and E-240 tapes.

The amount of tape left indicator may not be

accurate, since it depends on the type and condi-

tion tape used. Also, the amount of tape left indica-

tor is not displayed just after a cassette has been

inserted, or after playback or recording has begun.

Press i.

Press ^For ^Gto select Dr. and press OK.

2 ^{Press D or E to check a problem.}

Tape Counter Memory Stop

HEAD STATUS

The Digital Tape Counter can be displayed on your TV

screen instead of the time by pressing CLK/CNT on the

remote control.

The Digital Tape Counter indicates the relative positions

of recordings on the tape.

O PLEASE CLEAN:

Clean your video heads using the video head

cleaning cassette.

If noise still remains in the playback picture,

contact your SANYO authorized service agent.

Press CLK/CNT repeatedly until the counter is

displayed on the TV screen.

TAPE STATUS

O NOT RECORDABLE:

Insert a tape with its protection tab in place

Press CLEAR to set the counter to 0:00:00.

Press PLAY (H) or start recording.

The tape counter will display the actual play time in

hours, minutes and seconds.

NO. OF TIMER PROGRAMME

O 2

Shows the number of timer recording.

Press STOP when playback or recording is

complete.

NEXT TIMER PROGRAMME

O BBC1 26 10:00~11:00 SP

Shows the current status of timer recording.

Press BACKWARD.

The tape will rewind and automatically stop when

the counter returns to 0:00:00.

Press i to remove the menus from the TV

3 _screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation - VCR part

Hi-Fi Stereo Sound System

Widescreen Compatibility 16:9

Your DVD+VCR will record and play back Hi-Fi stereo

sound. In addition it has a NICAM digital stereo sound

decoder. This allows you to record and play back the

sound in several different ways. Video cassettes record-

ed on your DVD+VCR will have a normal mono audio

track and two VHS Hi-Fi stereo audio tracks. These

stereo tracks allow you to make audio recordings in Hi-

Fi stereo or bilingual mode from a TV broadcast, stereo

audio system, video disc or another Hi-Fi VCR.

Your DVD+VCR can record and play back widescreen

aspect ratio programmes (16:9). To record a wide

screen format programme successfully the correct type

of widescreen signal must be broadcast by the TV sta-

tion.

VCR

A B

Pr-12

ACMS

TIME

SYS-

AUTO

TEM

REC

SET

OSD

Dr.

DATE

16:9

4:3

NIC 4:3

OSD

OFF

Your DVD+VCR’s NICAM digital sound decoder

16:9

4:3

16:9

DPC

allows you to enjoy broadcasts with NICAM

sound, as well as standard stereo NICAM, bilin-

gual and mono sound.

Press i and press ^For ^Gto select 16:9/4:3.

Press OK.

The particular type of sound received or that

recorded will be briefly displayed on the TV screen

for a couple of seconds:

Press ^Dor ^Erepeatedly to select : AUTO, 4:3 or

16:9.

STEREO

Sound is automatically recorded on the Hi-Fi stereo

and mono tracks of the video tape.

BIL NICAM

Both audio channels will be recorded on the Hi-Fi

stereo tracks. The primary language channel (left) will

be recorded on the mono track of the video tape.

MONO

AUTO:

Automatically plays back Widescreen programmes as

Widescreen and Normal programmes as normal.

4:3:

Only for playing back and recording Normal format record-

ings (4:3).

16:9:

The sound is recorded on the Hi-Fi tracks and the

mono track of the video tape without any separation.

Only for playing back and recording Widescreen format

recordings (16:9).

3 ^{Press i to remove the menus.}

STEREO

Note

To enjoy Widescreen playback you must connect your

DVD+VCR to the TV using a SCART lead.

Press AUDIO repeatedly until the desired audio

mode appears.

The choice is STEREO, LEFT (left channel),

RIGHT (right channel) and MONO.

In BIL NICAM playback the primary language is

output on the left channel and the secondary lan-

guage is output simultaneously from the right chan-

nel when audio output is set to STEREO.

The primary language will be output from both

channels when the audio setting is MONO.

Please note that when adjusting the tracking control

Hi-Fi stereo sound may revert to MONO.

3 ^{Press i to return to a TV picture.}

Note

If the quality of stereo sound being received is

poor, the broadcast is automatically received in

monaural with better quality.

Still, if the quality of the sound is poor, set NIC in

the main menu to OFF (see p. 13). NICAM broad-

casts will be detected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation - DVD part

VCD2.0

VCD1.1

Notes on MP3 Discs

Video Mode Setting ^DVD

^ꢀWith certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

About MP3

ꢀ

An MP3 file is audio data compressed by using

MPEG1, the audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

^ꢀThe player can not read an MP3 file that has a file

extension other than “.mp3”.

^ꢀTo change the video mode, press and hold DISPLAY

about 3 seconds during disc playback. The new video

mode number selected is displayed on the TV screen.

Check whether the video quality has improved. If not,

repeat the above procedure until picture quality is

improved.

^ꢀThe player can not read a fake MP3 file that has a

file extension “.mp3”.

MP3 Disc compatibility with this player is

limited as follows:

1. Sampling Frequency / only at 44.1kHz

2. Bit rate/ within 32 - 320kbps

^ꢀVideo mode change sequence:

MODE1 → MODE2 → MODE3 → MODE4 →

MODE5 → MODE1

3. CD-R physical format should be “ISO 9660”

4. If you record MP3 files using the software which

cannot create a FILE SYSTEM, for example “Direct-

CD” etc., it is impossible to playback MP3 files. We

therefore recommend that you use “Easy-CD

Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3 files in the first

track. If there is no MP3 file in the 1st track, it can-

not playback MP3 files. If you wish to playback MP3

files, format all the data in the disc or use a new

one.

^ꢀIf you turn off the the power, the video mode will be

back to initial state (MODE1).

6. File names should be named using 8 letters or less

and must incorporate the “.mp3” extension

e.g. “********.MP3”.

7. Do not use special characters such as

“_?!><+*}{`[@ ]:;\/.,” etc.

8. Total number of files on the disc should be less than

200.

9. Use 74-minute CD-R discs (650M), do not use 80-

minute CD-R (700M) software.

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 files).

Customers should also note that permission is required

in order to download MP3 files and music from the

Internet. Our company has no right to grant such per-

mission. Permission should always be sought from the

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Recording

Copying from DVD To VCR

Recording from another video

recorder

This unit allows you to copy the contents of a DVD to a

VHS tape.

With the DVD+VCR you can make recordings from an

external source, such as copying from another VCR or

a camcorder.

Note

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “COPY PRO-

TECTED DISC” appears on the TV screen.

Note

In the following description, this DVD+VCR will be one

used for recording and other VCR will be used for play-

back.

Insert Disc.

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

VCR should be connected to the one of the

SCART sockets on the rear panel of your

DVD+VCR or the AV INPUT sockets on the front

panel of your DVD+VCR.

Insert VHS Tape.

Insert a blank VHS video tape into the VCR deck.

Press PLAY (H) on the DVD deck.

The DVD will go into play mode

ꢀ If the DVD disc menu appears, you may need to press

the PLAY (H) manually to begin copying.

Press AV until the socket you wish to record

from is displayed.

AV1 Sound and Picture recording using the lower

EURO AV1 socket on the back of your DVD+VCR.

AV2 Sound and Picture recording using the upper

EURO AV2 socket on the back of your DVD+VCR.

AV3 Sound and Picture recording from AV INPUT

sockets on the front of your DVD+VCR.

Press REC (z) on the VCR deck.

The DVD+VCR will go into Record mode.

Stop the Copy Process.

When the DVD is finished playing, press the VCR

on the remote control and then press STOP (x) to

end the copy.

Insert the recorded tape into VCR and a blank

tape into DVD+VCR.

You must stop the Copy process manually when the

DVD movie ends, or the unit may replay and record

over and over again.

To start recording, press REC (z) on DVD+VCR

and press PLAY on VCR.

When you want to finish copying, press the

STOP (x) on both appliances.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting - DVD part

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

ꢀ Refer to page 8.

Symptom

ꢀ DVD or VCR button is not switched

DVD or VCR do not

work properly.

properly.

ꢀ Plug the mains lead into the wall outlet

securely.

ꢀ The mains lead is disconnected.

No power.

ꢀ Insert a disc. (Check that the DVD, VCD

or, audio CD indicator in the display

window is lit.)

ꢀ No disc is inserted.

The power is on, but the

DVD player does not

work.

ꢀ Select the appropriate video input mode

on the TV so the picture from the

DVD+VCR appears on the TV screen.

ꢀ The TV is not set to receive DVD signal

output.

No picture.

ꢀ Connect the video cable into the jacks

securely.

ꢀ The video cable is not connected

securely.

No sound.

ꢀ Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD+VCR.

ꢀ The equipment connected with the

audio cable is not set to receive DVD

signal output.

ꢀ Connect the audio cable into the jacks

securely.

ꢀ The audio cables are not connected

securely.

ꢀ Turn on the equipment connected with

the audio cable.

ꢀ The power of the equipment connected

with the audio cable is turned off.

ꢀ The Digital Audio Output is set to the

wrong position.

ꢀ Set the Digital Audio Output to the

correct position, then turn on the

DVD+VCR again by pressing

The picture is poor.

ꢀ The disc is dirty.

ꢀ Clean the disc.

^ꢀInsert a playable disc. (Check the disc

type, colour system and Regional code.)

The DVD player does

not start playback.

ꢀ An unplayable disc is inserted.

ꢀ The disc is placed upside down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc with the playback side

down.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is dirty.

^ꢀClean the disc.

ꢀ Cancel the Rating function or change

the rating level.

ꢀ The Rating level is set.

ꢀ Remove the obstacle.

The remote control

does not work properly.

ꢀ There is an obstacle in the path of the

remote control and this unit.

^ꢀReplace the batteries with new ones.

ꢀ The batteries in the remote control are

exhausted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting - VCR part

Cause

Correction

Symptom

ꢀ The DVD+VCR is in the RECORD

PAUSE MODE.

ꢀ Press PAUSE/STEP (X) to resume

recording.

The tape does not run

during recording.

ꢀ The tape is already fully rewound or

fast-forwarded.

ꢀ Check the tape.

The tape will not rewind

or fast-forward.

ꢀ If you’re using only the RF aerial cable

for connection.

ꢀ Set the TV to the Video channel (see p.

12).

The playback picture

does not appear while

the tape is running.

ꢀ This is normal.

ꢀ Turn camcorder on and operate proper-

ly.

Noise appears during

visual search.

ꢀ The automatic tracking mode is

engaged.

ꢀ Try manual tracking (see p. 21).

Noise appears during

normal playback.

ꢀ The automatic tracking mode is

engaged.

ꢀ Try manual tracking (see p. 21).

Breaks are noticeable

in Hi-Fi soundtrack.

ꢀ There is no tape loaded, or the tape

loaded has had its record safety tab

removed.

ꢀ Insert a tape, or using adhesive tape,

cover the hole where the tab was

removed.

Recording cannot be

started.

ꢀ The source (another VCR, camcorder)

has not been properly connected.

ꢀ Confirm that the camcorder is properly

connected.

Tape-to-tape editing is

not possible.

ꢀ The clock/or the timer have been set

incorrectly.

ꢀ Re-perform the clock and/or timer set-

tings.

Timer recording won’t

work.

ꢀ Press

indicator is displayed on the

and confirm that the timer

ꢀ The timer is not engaged.

DVD+VCR’s Display.

ꢀ Insert a pate with adhesive tape, or

insert a tape with the record safety tab

intact.

ꢀ The loaded tape has had its record

safety tab removed.

ꢀ Incorrect the PlusCode programming

number.

ꢀ Re-enter the PlusCode programming

number.

PLEASE CHECK appears

when entering PlusCode

programming number.

VIDEO Plus+ system

does not record the TV

station or time you

request.

ꢀ Check your VIDEO Plus+ system set-up

(see p. 12-13).

ꢀ Your VIDEO Plus+ system channel posi-

tion has been incorrectly set.

No Hi-Fi sound.

ꢀ Select “STEREO” by repeatedly press-

ing AUDIO on the remote control.

ꢀ Audio mode is not set properly.

ꢀ Make sure NIC in the menu is set to

“AUTO” for the station to be recorded.

No NICAM sound

recording.

ꢀ NICAM mode is not set properly.

Moisture Condensation

Moisture condensation can occur:

In locations where moisture condensation may occur:

• When the DVD+VCR is moved from a cold place to a

warm place.

•

Keep the DVD+VCR plugged into an AC power outlet

with On. This will help prevent condensation.

• Under extremely humid conditions.

• When condensation has occurred, wait a few hours

for the DVD+VCR to dry before using it.

Video Head Cleaning

Whenever a video cassette is inserted into or ejected from your DVD+VCR the video head is automatically cleaned.

This should mean that additional head cleaning should not be necessary. However dirt accumulating on the head

after a long period of time can cause the playback picture to become blurred or broken up. High quality video cas-

sette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 18).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Enter the appropriate code number for the initial setting “Country Code” (See page 20).

Code Country

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Specification

General

Power requirements

Power consumption

Dimensions (approx.)

Mass (approx.)

AC 200-240 V , 50 Hz

23 W

430 X 97.5 X 360 mm (w x h x d)

5.3 kg (11.7 lbs)

Operating temperature

Timer

Operating humidity

5˚C to 40˚C (41˚F to 104˚F)

24-hour display type

5 % to 90 %

DVD Specifications

Laser

Signal system

Semiconductor laser, wavelength 650 nm

PAL/NTSC

Frequency response

DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100 dB (ANALOG OUT connectors only)

Less than 0.008%

More than 100 dB (DVD)

More than 95 dB (CD)

Outputs

VIDEO OUT

1.0 V(p-p), 75 ohms, sync negative

Audio output (digital audio)

Audio output (analog audio)

0.5 V(p-p), 75 ohms, RCA jack x 1

2.0 Vrms (1 kHz, 0 dB), 330 ohms, RCA jack (L, R) x 1/SCART(TO TV)

VCR Specifications

Head system

Television system

Recording format

RF OUT

4 heads helical scan azimuth system

PAL I colour system

PAL

RF Modulator

Tape speed

UHF 22-68 (Adjustable)

PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)

NTSC (Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP),

11.12 mm/s (EP)

Maximum recording time

Rewind time

SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)

About 180 min (E-180 tape)

Input level

VIDEO: 1.0 V(p-p), 75 ohms, unbalanced

AUDIO: -6.0 dBm, more than 10 kohms (SCART)

-6.0 dBm, more than 47 kohms (RCA)

VIDEO: 1.0 V(p-p), 75 ohms, unbalanced

AUDIO: -6.0 dBm, less than 1 kohm

VIDEO: More than 43 dB

Output level

Signal-to-noise ratio

Dynamic range

Accessory:

AUDIO: More than 70 dB

AUDIO: More than 85 dB

Video cable x 1, Audio cable x 1, RF aerial cable x 1, Remote control x 1, Batteries x 2

^ꢀDesign and specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

GUARANTEE TO CUSTOMER

Sanyo Europe Ltd. (the Company) guarantees to the initial retail purchaser that if this equipment is or becomes defective and that, in the opinion of the

Company, the defect is due to faulty material or workmanship the Company will, for a period of 12 calendar months from the date of sale to the original

purchaser repair or replace, at its sole option, free of charge, any such defective component part of the equipment, always provided that:-

1. The equipment has at all times been used in accordance with the operating instructions issued by the Company, and has not been connected to an electrical

mains supply for which it has not been adjusted.

2. Accidental damage, or damage caused by negligence or misuse by the user, including leakage from exhausted batteries, is specifically excluded.

3. Unauthorised repairs, or any modification to the equipment which has not been expressly approved by the Company, shall render this guarantee null and

void.

4. Failure due to fair wear and tear of any item, such as batteries, record playing styli, and tape recording, playback and erase heads and head cleaning is

specifically excluded.

This guarantee is not transferable and is only applicable within the United Kingdom (and the Republic of lreland). Nothing in this express guarantee affects the

statutory rights available to the purchaser of this equipment.

Thank you for buying Sanyo. This equipment should give you many years of pleasure and faithful service but in

the event that a fault occurs, the following notes for your guidance may be helpful:-

1. PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL BE REQUIRED FOR SERVICE DURING GUARANTEE.

2. If your Sanyo equipment proves faulty during the period of guarantee, take it or send it back to the dealer who originally supplied it together with this

guarantee and the proof of purchase. We have made arrangements with our approved dealers under which they will carry out in guarantee service repairs

on our behalf. In this way, we hope to reduce to a minimum the amount of time you will be without your equipment.

3. If for some reason it is impossible to return the equipment to the original supplier, please contact our Service Administration Department at the address

below for further advice.

4. Should the equipment require servicing after the expiry of the guarantee period, take or send it to the original supplier or any other Sanyo dealer. He will be

pleased to give you a quotation for the repair. If you are in any doubt about what to do, write to us at the address below or telephone:

Sanyo Europe Ltd.

Sanyo House Otterspool Way, Watford, Hertfordshire WD25 8JX Tel: (01923) 246363

P/N: 3834RP0076U

KW4HV/E (0402)

SANYO Electric Co., Ltd.

Download from Www.Somanuals.com. All Manuals Search And Download.

RCA Flat Panel Television D61W130 User Guide
ResMed Respiratory Product Bilevels User Guide
Rosen Entertainment Systems VCR CV6825 User Guide
Saitek Speaker A 200 User Guide
Salton Coffeemaker MEVA10B User Guide
Samson Thermostat 5100 User Guide
Samsung Microwave Oven CE2D33 CE2D33T User Guide
Sanyo Battery Charger UR14650P User Guide
Sanyo Camera Accessories HR SCU User Guide
SEM Utility Trailer HD55 User Guide