Samsung Security Camera SPD 3350 User Guide

SPD-3750T/3750/3350

37X/33X High ResolutionWDR PTZ Dome Camera

37x/33x Ultra-Low Light & WDR SPEED DOME CAMERA

SPD-3750T/3750/3350 User’s Manual

Before installing and operating the camera, please read this user’s manual carefully.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

The lightning flash with an arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

INFORMATION-This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference

at his own expense.

WARNING

- CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE

MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE

THE EQUIPMENT.

- TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION : To prevent electric shock and risk of fire hazards:

- The installation for this apparatus should be by a qualified service person

and should conform to all local codes.

- Do NOT use power sources other than Class 2 power source.

- Carefully push the unlock buttons to prevent injury due to falling of this

apparatus.

This installation should be made by a qualified service person and

should conform to all local codes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

■

Sequence Setting ………………………………………………………… 49

•

Features ………………………………………………………………………… 6

Cautions for Using Auto Track (SPD-3750T) ………………………… 7

Warnings & Cautions ……………………………………………………… 9

Components and Accessories …………………………………………… 12

Component Names and Functions……………………………………… 13

Installing Your Camera……………………………………………………… 15

▶

Power On Resume & MD Dwell Time ………………………………………… 49

Preset ………………………………………………………………………………… 50

Swing SEQ …………………………………………………………………………… 54

Group SEQ …………………………………………………………………………… 55

Tour SEQ ……………………………………………………………………………… 56

PTZ Trace …………………………………………………………………………… 57

Auto Run……………………………………………………………………………… 58

■

Speed Dome Camara and Appliances Wiring Diagram ……… 15

Communication DIP Switch Settings (SW2)……………………… 17

P/T Setting ………………………………………………………………… 59

▶

Pan/Tilt Limit ………………………………………………………………………… 59

Area Setting ………………………………………………………………………… 60

Area Masking ……………………………………………………………………… 61

Prop. P/T ……………………………………………………………………………… 62

Digital Flip …………………………………………………………………………… 63

Image Hold…………………………………………………………………………… 64

Auto Track1 ………………………………………………………………………… 65

Auto Track2 ………………………………………………………………………… 67

▶

Protocol Settings …………………………………………………………………… 17

Baud Rate Settings………………………………………………………………… 18

Communication Method Settings ……………………………………………… 18

Communication Response Settings …………………………………………… 18

Termination Settings ……………………………………………………………… 18

Camera Backup Settings ………………………………………………………… 19

■

Camera ID DIP Switch Settings (SW1) …………………………… 19

Camera ID Chart …………………………………………………………………… 20

On-Ceiling Mount Type Installation Example …………………… 29

▶

•

OSD Setting …………………………………………………………………… 69

Alarm Setting ………………………………………………………………… 70

Initialization Setting………………………………………………………… 74

Status Check…………………………………………………………………… 76

Product Specifications……………………………………………………… 77

•

Interface Symbols …………………………………………………………… 32

Operating Your Camera …………………………………………………… 33

Functional Description……………………………………………………… 37

■

Camera Setting …………………………………………………………… 37

▶

Focus and Zoom …………………………………………………………………… 37

White Balance ……………………………………………………………………… 39

Exposure……………………………………………………………………………… 40

Backlight……………………………………………………………………………… 41

AGC …………………………………………………………………………………… 45

SSNR(Samsung Super Noise Reduction) …………………………………… 46

Day & Night ………………………………………………………………………… 47

Others ………………………………………………………………………………… 48

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Cautions for Using Auto Track (SPD-3750T)

Features

The following cautions are for the Auto Track function built-in with the SPD-3750T;The SPD-

3750/3350 do not have Auto Track.

A/F 37x/33x Optical Zoom

Smart P/T

To use Auto Track to its full potential, please read and be aware of the following cautions.

Neglecting the cautions may cause unsatisfactory performance of the tracking function as

well as camera malfunctions.

The built-in 37x(SPD-3750T/3750)/33x(SPD-3350) optical

zoom lens with auto-focus is combined with a 12x digital

zoom, providing a maximum of 444x/396x zoom.

The Smart P/T function automatically adjusts the

control speed of the Pan and Tilt functions according to

the current zoom power. It is useful to adjust the

functions manually for detailed controls when

monitoring a high-powered zoom.

Versatile Protocol Processing

• Auto Track is specifically to track down unknown intruders. It is not be suitable to monitor

a crowd.

• If the camera is not safely secured, tracking errors may occur.

• If the camera lens is smeared with foreign substances, snow flakes, or raindrops, the

camera may incur unsatisfactory performance in the tracking function. For optimal

performance, please install the camera in an environment safe from contamination, and

clean the camera lens on regular basis.

• If the tracking function shows poor performance at nighttime or under low light

circumstances, use the Sens-Up function.

Day & Night

This camera supports a total of 8 types of communication

protocols: Samsung Techwin, Pelco-D, Pelco-P, Samsung

Electronics, Panasonic, Honeywell, AD and Vicon.

With its daytime & nighttime switch and Sens-Up

functions based on the ICR (Infrared Cut filter Removal)

method, the camera provides high quality pictures

regardless of whether it is day or night.

* Sens-Up increases the CCD sensitivity by electrically

extending the camera’s exposure time.

Wide Range Auto Security

Functions

- Auto Tracking(SPD-3750T Only) : A moving object or a

person can be tracked and recorded automatically by

the camera with its Pan, Tilt, and Zoom functions.

- Multiple Preset Function Saving : Up to 13 camera

image properities can be saved individually to provide

high quality pictures.

- Image Holding : When moving between presets in Group

and Tour functions, using this Preset Freeze function

holds the image status and helps the screen observer

relieve visual fatigue.

- PIZ Trace : Patterns operated with the joystick can be

saved and replayed by users.

- Swing : Using the Swing function commands the

camera to move between 2 selected locations,

monitoring the route.

* Day & Night enables you to select between color and

B/W modes depending on the lighting conditions.

• Auto Track may have errors at times when pronounced shadows are created: e.g. sunrise

and sunset.

OSD (On Screen Display)

• The camera may catch and follow unintended movements – car traffic or swaying tree

branches – during the Auto Track operation.To prevent and correct such errors, adjust the

installation direction and angle of the camera, or use Zone Settings (Mask) (page 67).

• Adjust the installation direction and angle of the camera, or use Zone Settings also under

the following conditions:With excessively bright light sources, under flickering lights, or if

the camera displays internal reflections.

• When using Auto Track, it is recommended to adjust the tracking object size to 1/4 of the

screen.

• This feature may not perform as expected depending on the situation and circumstances.

Samsung Techwin is not responsible for injuries and financial damage caused by the

situation described above.

The camera IDs, camera preset numbers, preset names,

area names, and camera operation status are displayed

on the monitor, allowing set up of various camera

functions through the OSD menu screen.

Preset Position Saving and Loading

Up to 255 preset positions can be set. Using this

function saves and brings up the camera feed of a

selected monitoring location.

- Group Search : Maximum 255 Preset positions are

toured in order.

- Tour Search : Maximum 6 Group Search functions are

toured in order.

Camera Backup

Digital Flip

This is to back up the camera’s sequence information

and presets. This is useful when the camera or its

install base are damaged or malfunctions occur.

The Digital Flip function is useful to monitor moving

objects or people passing directly under the camera.

When an object or a person passes directly under the

camera, its tilt monitor follows the object or person over

100 degrees to the other side of the tilt area without

panning. The screen inversion starting to occur at 100

degrees or higher is digitally adjusted.

Area Masking

If a monitoring location includes a highly private area,

the area can be selectively masked on the screen.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Samsung Techwin cares for the environment at all product manufacturing

stages to preserve the environment, and is taking a number of steps to provide

customers with more environment-friendly products. The Eco mark represents

Samsung Techwin's will to create environment-friendly products, and indicates

that the product satisfies the EU RoHS Directive.

Warnings & Cautions

Warnings

Stop using the camera if smoke or

abnormal heat is detected.

Do not install on your own.

Warnings & Cautions

This information is provided to ensure your safety and to prevent any losses, financial or

otherwise. Please read it carefully and use the product accordingly.

* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as

an aerial ladder while providing after-sales service shall be at your expense.

* Unplug the power plug when thunder crashes or lightning flashes to prevent fire and damage to the product.

This installation should be made by a qualified service

person. Installing this product on your own may result in

fire or electric shock. For the installation service, contact

the retail shop where you bought the product.

May cause fire.

* This product is support equipment for a security system. Therefore, we can't compensate for material losses and/or

personal injuries by robbery, fire, natural disaster, or anything of the sort.

Warning/Caution/Special Mark Messages

Do not install in high humidity or in a

place that may be exposed to oil or gas.

Do not install on an unsubstantial wall

that may be subject to vibrations.

Ignoring this information may

result in material loss and/or

result in material loss and/or slight

serious personal injuries, including

injuries.

death.

Indicates “Prohibited”.

Indicates “No Disassembly”.

May cause product malfunctions, electric shocks, and fire.

May cause the product to fall.

Do not handle the power plug

with wet hands.

Do not disassemble the camera or

insert foreign subjects.

May cause electric shock.

May cause fire and damage to the product.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings & Cautions

Detailed Warnings and Cautions

Cautions

- Avoid operating the camera for long durations under high temperatures and in high

humidity. Excessive heat can shorten the lifespan of the camera components.

Do not install under extreme

temperature conditions.

Do not install under unstable

lighting conditions.

- Do not install or place the camera near any heat sources.

- Subjecting the dome cover to physical shock may damage the camera and cause water

leakage into it.

- Do not place the camera facing direct sunlight or other intense light sources. Strong lights

such as spotlights can cause distortions—blooming and smear—as well as discolorations

on the screen by heating up the color filter of the camera.They also may cause internal

reflections of the camera, leading to operational malfunctions.

- Do not drop the camera or subject it to physical shock or vibration; this can cause serious

damage to the camera.

- When installing the camera near a power line, make sure to keep at least 1 meter distance

from the power line, or earth an additional metal pipe to separate the camera from the

power source.

Use only under temperature conditions between -0ºC

and +50ºC to prevent low graphics quality and product

malfunctions. When using in high temperature conditions,

provide good ventilation.

Severe lighting changes or flickering may hinder normal

camera operation.

Do not drop the camera or subject

it to physical shock.

Never keep the camera face to direct

sunlight or any other strong lights.

- This camera is to install on the ceiling. Installing it on the ground or a unleveled location

may cause product malfunctions and shorten its lifespan.

- This camera is provided with separate indoor and outdoor housings.When installing it in

an outdoor environment, use the outdoor housing.

- Avoid installing and operating the camera in the following places.

∙ Places whose temperature exceed the camera’s recommended range. (Indoor: -10℃ ~

50℃, Outdoor: Refer to the housing manual)

∙ Places where drastic temperature changes occur: e.g. Near an air conditioner.

May cause product malfunctions.

May cause critical damage to the CCD.

∙ Places that are exposed to steam, oil, and inflammable substances: e.g. Inside a kitchen.

∙ Places that are exposed to radioactivity, X-rays, strong electric waves, and electro-

magnetic waves.

Do not install in a place that may be

exposed to rain, water, or radioactivity.

Avoid touching the camera lens.

∙ Places that are exposed to outdoor air contaminants: e.g. Dust and car exhaust.

∙ Places in high humidity.

∙ Places that are exposed to corrosive gas: e.g. Next to the sea.

- Smeared and dusty dome covers decrease the picture and video quality. Clean the dome

cover and camera lens on a regular basis.

- Remove the plastic wrap on the dome cover only after the camera installation is complete.

- This camera is not equipped with a power switch. Plug in the camera only after the

installation is complete.

The lens is the most important component of the camera.

Be careful not to smear it with fingerprints.

Water leakage into the camera may cause damage.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Component Names and Functions

Components and Accessories

* Components

Front

Side

Power Adapter (AC 24V, Peak 2.5A)

User’s Manual

* Accessories

The following items are sold separately from the camera.

Housings

STH-380PO

Ultra Low-

Temperature

Heavy

STH-370PO

Low-

Temperature

Heavyweight

(-20℃~50℃)

STH-370PI

Indoor Housing

(-10℃~50℃)

(-40℃~50℃)

STH-370PEV

Flush-Mount

Indoor Housing

(-10℃~50℃)

STH-360PO

Low-

Temperature

Lightweight

(-20℃~50℃)

Bottom

Unlock Button

SW2: Communication DIP Switch

SW1: ID DIP Switch

Safety Wire Holder

Brackets

STB-350PPM

Parapet Mount

STB-340PCM

Corner Mount

STB-330PPM

Pole Mount

STB-25PF

Indoor Flange

STB-30PF

Indoor Flange

STB-370PC

Surface-mount

Install Base

STB-496PPV

Ceiling Bracket

STB-270PWV

Wall Bracket

STB-270B

Setup Box

Notes

ꢀ•ꢀꢀForꢀtheꢀDIPꢀswitchꢀsettings,ꢀpleaseꢀreferꢀtoꢀtheꢀ“InstallingꢀYourꢀCamera”ꢀonꢀPageꢀ17.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

Component Names and Functions

Speed Dome Camara and Appliances Wiring Diagram

Camera Wiring Interface Board (Sold Separately)

For the camera wiring, please refer to the picture below.

Connecting with Samsung Techwin’s “Stand Alone DVR”

The camera’s wiring interface board is equipped to a housing that is sold separately.

Video Output

· RS-485 :

Camera

D+

Stand Alone DVR

T(TX)+

Alarm

D-

T(TX)-

ꢀSVR-1680/1660/1645/960/

Alarm Output

·RS-422 :

Fan Heater

Connector

Camera

D+

Stand Alone DVR

T(TX)+

D-

T(TX)-

Alarm Input

ꢀSVR-945

TXD+

TXD-

R(RX)+

R(TX)-

Power Supply

Communications and AUX

ꢀSVR-940/450

ꢀSVR-1650/1640A/950E

Connecting with the Samsung Techwin Controller SCC-3100A

AC24V 2.5A

Power Input

Ground

·RS-485 :

SCC-3100A

Refer to the below Control

Signal Connection chart

Data Box PORT1

RX+

RX-

AUX Output

Camera

TX+

TX-

D+

D-

Control Signal Connection

Notes

· RS485 Communications

Controller

Camera

or DVR

ꢀ•ꢀꢀTheꢀmaximumꢀpowerꢀcapacityꢀofꢀtheꢀbuilt-inꢀ

relay is 30VDC/2A, 125VAC/0.5A, and

250VAC/0.25A.

ꢀ•ꢀꢀConnectingꢀtheꢀpowerꢀconnectorꢀandꢀGNDꢀ

incorrectly to the NC/NO and COM ports may

cause a short circuit and fire, damaging the

camera.

SCC-3100A

Data Box PORT1

·RS-422 :

D+

D-

TXD+

TXD-

Camera

TX+

TX-

· RS422 Communications

Camera

RX+

RX-

Controller

or DVR

TXD+

D+

D-

TXD-

TX+

TX-

D+

D-

TXD+

TXD-

RXD+

RXD-

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

Note!

Communication Protocol DIP Switch Settings (SW2)

* The following DVR models support all functions of the camera.

- 16Ch : SVR-1680/1660/1645/1650E/1640A

- 9Ch : SVR-960/945/950E

- 4Ch : SVR-440

* The following DVR models support only the Pan,Tilt, Zoom, and Focus functions of

the camera.

- 9Ch : SVR-940

- 4Ch : SVR-450

SW2 Pin No. Purpose

1~4

5~6

Protocol Settings

Baud Rate Settings

Transfer Method (RS-485/422) Settings

Response Mode Settings

Backup Mode Settings 1

Termination Settings

* Memo

10~11

MEMO

Backup Mode Settings 2

ꢀ•

Protocol Settings

Select a communication protocol for the camera

Protocol

Samsung

Pelco-D

SW2-#1

OFF

SW2-#2

OFF

SW2-#3

OFF

SW2-#4

OFF

Pelco-P

Samsung Elec.

Panasonic

Vicon

Honeywell

Reserved

OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

ꢀ•

Baud Rate Settings

ꢀ•

Camera Backup Settings

Select the transfer speed of a selected communication protocol.

These settings are useful when the camera or its install base are damaged or malfunctions

occur.When replacing the camera or its install base, you can transfer existing presets and

sequence information to the replacement using these settings.

No.

Baud Rate(BPS)

2,400

SW2-#5

SW2-#6

OFF

4,800

Backup Function

SW2- #9

SW2- #12

OFF

9,600

OFF

→

Backup(IB D)

OFF

19,200

OFF

→

Backup(D IB)

OFF

Backup Disable

- Backup(IB→D) : Enables transferring the current camera's sequence information to a new

camera.

ꢀ•

Communication Method Settings

- Backup(D→IB) : Enables transferring the current camera's sequence information to a new

install base.

Select a communication method for the camera.

Function

Transfer Mode Switch

OFF

RS-485(2Wire)

*IB: Install base, D: Dome Camera

SW2- #7

RS-422(4Wire)

Notes

ꢀ•ꢀꢀToꢀuseꢀaꢀthirdꢀpartyꢀcontrollerꢀwithꢀthisꢀproduct,ꢀpleaseꢀcontactꢀourꢀAfter-SalesꢀServiceꢀorꢀ

Technology Department.

ꢀ•

Communication Response Settings

ꢀ•ꢀꢀADꢀProtocolꢀControlꢀMethod

- Input Camera OSD: 3+Auxiliary On

- Output Camera OSD: 3+Auxiliary Off

- Enter: IRIS Open

- ESC: IRIS Close

Select a communication response method for the camera and controller: Response or No

Response.

Function

OFF

SW2- #8

Response Mode Switch

Response

No Response

ꢀ•ꢀꢀForꢀmoreꢀinformationꢀaboutꢀtheꢀprotocols,ꢀreferꢀtoꢀourꢀofficialꢀwebsite.

Camera ID DIP Switch Settings (SW1)

ꢀ•

Termination Settings

To set up camera IDs, refer to the “Camera ID Chart” next.

To prevent the attenuation of communication signals between the camera and controller, 2

cameras in a longest distance for the camera and controller communication loop must be

set up with the termination settings.

Camera Input Position

Termination of Longest Path

On the Path

SW2- #10

SW2- #11

OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

SW1-#1

OFF

SW1-#2

OFF

SW1-#3

OFF

SW1-#4

SW1-#5

OFF

SW1-#6

SW1-#7

OFF

SW1-#8

OFF

ꢀ•

Camera ID Chart

SW1-#1

ON/OFF

OFF

SW1-#2

OFF

SW1-#3

OFF

SW1-#4

OFF

SW1-#5

OFF

SW1-#6

OFF

SW1-#7

OFF

SW1-#8

OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

SW1-#1

OFF

SW1-#2

OFF

SW1-#3

SW1-#4

OFF

SW1-#5

SW1-#6

OFF

SW1-#7

SW1-#8

OFF

SW1-#1

OFF

SW1-#2

OFF

SW1-#3

OFF

SW1-#4

OFF

SW1-#5

OFF

SW1-#6

OFF

SW1-#7

OFF

SW1-#8

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

171

SW1-#1

OFF

SW1-#2

OFF

SW1-#3

OFF

SW1-#4

SW1-#5

OFF

SW1-#6

SW1-#7

OFF

SW1-#8

SW1-#1

OFF

SW1-#2

OFF

SW1-#3

OFF

SW1-#4

OFF

SW1-#5

SW1-#6

OFF

SW1-#7

SW1-#8

214

215

216

217

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

OFF

212

213

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

Preparing and Installing Camera Bracket

Preparing Adapter and Cables

– Power Adapter

Power adapter has the capacity of AC24V 2.5A.

For the installation guidelines for the brackets and housings, refer to the user’s manual

enclosed with the bracket or housing that is sold separately.

Camera Wiring Diagram 1

•

– Video Cable

A BNC coaxial cable shown in the picture is required to connect Speed Dome’s video

output terminal to the monitor.

Distance

500m or shorter

500m or longer

Recommended Cable Specification

5C2V Coaxial Cable

7C2V Coaxial Cable

– Communications Cable

For the camera to communicate with the controller, a RS-485/422 communications line is

required.To ensure the quality of long distance communications and the accuracy of the

overall communications, using a twisted pair cable such as UTP Cable is recommended.

* Caution!

Depending on the camera’s environment, the communications distance may vary.

Notes

ꢀ•ꢀꢀNeitherꢀtheꢀvideoꢀnorꢀcommunicationsꢀcableꢀisꢀenclosedꢀwithꢀtheꢀcamera.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

Camera Wiring Diagram 2

•

On-Ceiling Mount Type Installation Example

1.Attaching Template and Installing STB-370PC

Attach the enclosed template to the ceiling, then drill a hole in the ceiling according to the

diameter marked on the template. Drop the camera cables down from the ceiling through

the hole. Next, install the exposed bracket STB-370PC to the ceiling as shown in the

picture.Before installing the exposed bracket, open the hinged door at the bottom of the

bracket as shown in the picture. Hold the knob on the hinged door to open.

Template

Knob

2.Wiring Terminal Cables

Connect the cables to the terminal block on the

hinged door. For the location of the wiring pins,

please refer to the “Camera Wiring Diagram”

on Page 14. Once the wiring is successful, close

the hinged door.

Notes

ꢀ•ꢀꢀDoꢀnotꢀconnectꢀtheꢀcameraꢀtoꢀaꢀpowerꢀoutletꢀuntilꢀtheꢀinstallationꢀisꢀcomplete.ꢀSupplyingꢀ

power in the middle of the installation may cause fire or damage the product.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing Your Camera

3. Setting Up Camera DIP Switches

✽

To attach or detach the camera, refer to the picture.

DIP switches for communication and ID protocols are located on the bottom of the

camera. For the switch settings, refer to the dip switch settings of this manual.

* Attaching the camera: Hold up the camera and push it to the mount as shown in the

picture. Push the camera until you hear a “click”.

* Detaching the camera:To detach the camera, pull the camera downward while pushing

the unlock buttons on the camera upward.

ID(SW1)

Protocol(SW2)

Unlock Button

UNLOCK

5. Connecting Camera Safety Cable and Attaching Camera

Carefully attach the camera to the mount following the alignment guide marks as shown

in the picture. First hook the camera's safety cable on the mount, and then attach the

camera.

To attach the

camera

To detach the

camera

Alignment

Direction

Guides

Safety

Cable

Alignment

Direction

Guides

Alignment

Directions

✽

To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.

Notes

ꢀ•ꢀꢀMakeꢀsureꢀtoꢀfirstꢀhookꢀtheꢀcamera'sꢀsafetyꢀcableꢀtoꢀtheꢀmountꢀbeforeꢀproceeding.ꢀ

Otherwise you may be exposed to serious injury caused by a fallen camera.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating Your Camera

Interface Symbols

• Motion Detection Standby/Operation Display :

• OSD Menu Screen :

- When in standby mode, the " " in the upper right of the screen blinks and then

changes to " " if motion is detected.

• Alarm Input Port Status Display :

- "①","②","③" and "④" in the upper right of the screen blink.

• Current Alarm Port Display According to Input Alarm Ports(Priority) :

- Only one of " ꢁ"," ꢂ"," ꢃ"," ꢄ" in the upper right of the screen blinks.

• Preset Number Display Settings :

Camera Setting

Focus & Zoom

Sub Menu Available

①

Sub Menu Not Available

ꢂ White Balance

ATW

---

- '*' : If a preset number is already available

- 'H' : If a preset location is the camera’s home position

Operating Your Camera

- 'T' : If a preset location is the camera’s Auto Track starting point (SPD-3750T Only)

• If an OSD Menu has Sub Menus :

- The color of the circle around the menu number shows as embossed, e.g. "①".

• If an OSD Menu Does Not Have Sub Menus :

- The circle around the menu number shows as engraved, e.g. "ꢁ".

• Panning and Tilting

- Use the joystick of the controller or its direction buttons.

• Controlling Zoon

- Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the Zoom

button.

• Accessing Screen Menus

- Press the Menu or OSD button on the controller.

Motion Detect

✽

For more detailed information about controls using a third party controller or a DVR, refer to the

user’s manual of the product.

• PTZ Function Screen :

Alarm Input

OSD Commands, Function Chart, and Menu Controls

ID=001

ꢁ①②③④

This dome camera can be operated using two methods: Using hot keys on its dedicated

controller, or accessing the OSD (On Screen Display) on the video output.The OSD menu

commands are as follows:

Area Display

Area1 Area Name

Command

Function

Move the joystick up/down/left/right

Enter/Focus Far

ESC/Focus Near

Moves the OSD menus up/down/left/right, respectively.

Selects a menu and allows access to the sub menus.

Cancels a command and moves back to an upper-level menu.

Sequence Status

Preset Info

G-SEQ1

PRESET=001 Preset Name

P:300 T:040 10X

Dome Cover Setting

Before optimizing the camera focus settings for the dome cover shape, please select the

dome cover type on the camera’s main menu. (Refer to Page 48)

• Preset Number Setting Screen :

Dome Cover Setting

Installation Type

Preset Edit

Preset=011* (1~255)

Outer

Inner

None

Dome cover type for outdoor housings except the indoor flush model.

Default dome cover type including the indoor flush model.

When using the camera without a dome cover.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating Your Camera

①Pan Swing

②Swing SEQ. ②Tilt Swing

③P&T Swing

③Group SEQ. Group1~6

④Tour SEQ. ①Setting②Execute③Clear

①Setting②Execute③Clear

*OSD Menu Chart

Default

One Shot AF

Auto

①Focus Mode

Auto/Manual/One Shot AF

①Focus

&Zoom

Mode

Auto/Tracking/Off

Slow/Medium/Fast Fast

②Zoom Tracking

③Digital Zoom

Speed

②

⑤PTZ Trace Trace1~4

①Replay②Memorize

Off/Home/Preset/Swing/Group/

Tour/Trace/A.Pan

Off/2X/3X/4X/5X/.../12X

ATW/INDOOR/OUTDOOR/AWC

Off

AT W

117

Sequence

Setting

①Mode

Off

②White

Balance

⑥Auto Run

AWB Mode

Red

Blue

Manual

②Time

1~60(Sec), 1~60(Min)

30 Sec

①Brightness

②Iris

0~100

Auto

Manual

⑦Power On

Resume

⑧MD Dwell

Time

On/Off

Auto

F1.6

---

Iris Level

①Off

②On

③Exposure

③Shutter

④Sens-Up

①Off

---/A.FLK/Manual

1~60(Sec),1~60(Min)

①Position

②On/Off

①Position

②On/Off

30 Sec

Off

Sens-Up Limit

X2/X4...X256

Auto/Off

Auto(X2)

Off

①Pan Limit

②Tilt Limit

①Pan/Tilt

Limit

Level

Mask Color

Up/Down/Left/Right/

Increase/Decrease

Low/Medium/High Medium

Off

②WDR

1~100

Low/High

0~10

Low

②Area Setting Area1~8

①Name/②Position/③On/Off

④Back Light

③Area

③HLC

④User

Mask1~8

Masking

①Position/②On/Off

Off

①Camera

Setting

④Prop.P/T

⑤Digital Flip

On/Off

Off/Low/Medium/High

Manual

Off/Low/Medium/High

Medium

5 dB

Medium

⑤AGC

⑥Image Hold On/Off

①Auto Track

②Camera Height 2.5m~30m

Off

Level

5~41

⑥SSNR

On/Off

Off

Auto

③P/T

Setting

2.5 m

Small

High

Off

Burst Level

0~100

Burst On/Off

Mode

Color

③Object Size

④Sensitivity

⑤Zoom Control

⑥Auto Release

⑦Auto Return

⑧Lost Mode

Small/Medium/Large

⑦Day

&Night

High/Medium/Low

Off/One Shot/Continuous

Off/10sec~5min

Off/1sec~5min

Stop/Research/Zoom Out

①Position

B/W

Slow/Fast

5/7/10/15/20/30/40/60 Sec

Internal

Line Lock

⑦Auto Track 1

Duration

Dwell Time

Fast

5 Sec

Sync

Internal

Stop

Line Lock Phase

Stabilizer

Image Adj.

On/Off

Off

Inner

②Mode(Alarm/

Mask)

⑧Others

①Preset

①Sharpness On(0~32)/Off

②Color

On/Off　

Inner/Outer/None

①Zone Setting

Zone1~8

Mask

0~100

⑧Auto Track 2

③On/Off

Off/On/Pointer/Target

On/Off

Off

Freeze

Dome Cover

①Setting②Edit③Home Position④Execute⑤Clear

⑥Status

②Indicator

③Target Lock

①Camera ID On/Off

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating Your Camera

Functional Description

②Camera

Name

③Preset

Number

④Preset

Name

①On/Off

②Edit

Off

Camera Setting

1. Focus and Zoom Settings

1.1 Focus Mode and Digital Zoom Setting Menu

On/Off

①On/Off

②Edit

▶

Main Menu/Camera Setting/Focus & Zoom

Off

④OSD

Setting

⑤Sequence

Status

⑥Area Name On/Off

On/Off

Focus Mode :

- Auto : Performs continuous auto-focus.

- Manual : Changes the camera mode to Manual Focus.

- One Shot AF :Auto-focuses the camera once after the

Pan,Tilt, or Zoom function is used.

Main Menu

Off

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

⑦PTZ

On/Off

Position

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

⑧Language

①Alarm

Enable

English/Chinese/Fran ais/Deutsch/Espa ol/Italiano

English

Off

On/Off

Digital Zoom :

①In1

MOD:NC/NO/OFF

Priority:1~4　

Enables the maximum digital zoom.

Setting the digital zoom to 12X provides a total zoom of

444x(SPD-3750T/3750)/396x(SPD-3350).

②In2

③In3

④In4

Out1~2

②Alarm Input

Off

SEQ:Preset/Swing/Group/Tour/

A.Pan/Trace/Off

Status

⑤Alarm

Setting

➡

1~4,MD,TRK

Off/On/Momentary

1~60(Sec),

③Alarm

Output

Camera Setting

Time1~2

Dwell Time

1~60(Min),

1~60(Hour)

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

Notes

ATW

①On/Off

②Time

On/Off

Off

④Aux. Output

ꢀ•ꢀꢀUnlikeꢀtheꢀopticalꢀzoom,ꢀtheꢀgraphicsꢀqualityꢀofꢀtheꢀ

digital zoom decreases as its zoom power increases.

ꢀ•ꢀꢀTheꢀauto-focusꢀfunctionꢀmayꢀnotꢀoperateꢀnormallyꢀ

under the following conditions :

- When background illumination is low

- While Slow-Shutter is in operation

1~60(Sec), 1~60(Min)

①Power On

Reset

Cancel/Execute

Off,1~7Days

Medium

SSNR

②Factory

Default Set

③Camera

Default Set

④Auto

Refresh

⑤Auto Track

Default

Day & Night

Others

⑥Initialize

⑦Status

- If the zoom level is set too high

- When background illumination is too high

- If a long distance object and a close distance object

appear together within a monitoring area

- If there is no contrast, e.g. the sky or a wall

- If the camera is facing a thin horizontal line

ꢀ•ꢀꢀAutoꢀFocusꢀfocusesꢀonꢀanꢀobjectꢀinꢀtheꢀcenterꢀofꢀtheꢀ

screen; objects around the screen edges may not be

properly in focus.

➡

Off

Focus & Zoom

Cancel/Execute

ꢁ

②

③

Focus Mode

ONE SHOT AF

Zoom Tracking

Digital Zoom OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

2. White Balance

1.2 Zoom Tracking

▶

Main Menu/Camera Setting/Focus & Zoom/Zoom Tracking

Main Menu/Camera Setting/White Balance

Through this menu you can set up the camera’s focus mode

when zooming.

The White Balance menu adjusts the balance of the screen

colors under different lighting conditions.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Mode :

- ATW :Adjusts the screen color automatically.

- Indoor :Adjusts the screen color to be optimal in an

indoor environment.

- Outdoor :Adjusts the screen color to be optimal in an

outdoor environment.

- AWC :Adjusts the screen color to be optimized to the

current lighting and monitor conditions. Using this

setting may require an readjustment if the lighting

conditions changes.

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

- Auto :Auto-focuses when zooming.

- Tracking : Focuses manually when zooming.

- Off : Disable the focus modes when zooming. (Full

manual mode)

Status

Speed :

Status

- Slow/Fast :Adjusts the zooming speed.

➡

Camera Setting

➡

- MANUAL : Enables customization the Red and Blue gains.

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

SSNR

Day & Night

Others

Camera Setting

ATW

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

ATW

Medium

OFF

Medium

SSNR

Day & Night

Others

➡

Focus & Zoom

ꢁ

②

③

Focus Mode

Zoom Tracking

Digital Zoom OFF

ONE SHOT AF

Notes

White Balance may not work properly under the following conditions.

ꢁWhen the color temperature of the environment surrounding the subject is out of the

control range.(e.g. Clear sky or sunset)

➡

ꢂWhen the ambient illumination of the subject is dim.

Zoom Tracking

ꢃ If the camera is directed towards a fluorescent light or is installed in a place where

illumination changes dramatically, White Balance adjustments may not deliver

consistent results.

ꢁ

②

Mode

AUTO

FAST

Speed

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

3. Exposure

4. Backlight

4.1 Backlight Mode Settings

▶

Main Menu/Camera Setting/Exposure

▶

Main Menu/Camera Setting/Back Light

The Exposure settings are to control the camera’s exposure

meter.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Unlike other cameras, Samsung Techwin’s unique SV-IV DSP

chip gives you a clear image of the subject even with bright

backlight.

Main Menu

Brightness : Adjusts the screen brightness.

(Over 50: Brighter, Under 50: Darker)

Iris :

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

- Auto :Automatically adjusts the exposure meter.

- Manual : Enables manual adjustment of the exposure

meter. (Over 50: Brighter, Under 50: Darker)

Shutter : Controls the camera’s electronic shutter.

- --- :The shutter speed is fixed at 1/60 for NTSC and 1/50

for PAL. Operates when Iris is on the Auto Mode.

- ESC :Adjusts the shutter speed automatically according

to the screen brightness. Operates when Iris is on

the Manual Mode.

- A.FLK : Select this setting when you experience picture

flickering. Flickering can happen when artificial

lighting frequencies clash with camera frame rates.

- Manual : Enables manual adjustment of the shutter speed.

Sens-Up :

Back Light Mode

- Off : Disables the Backlight mode.

- WDR :Activates the Wide Dynamic Range mode.

- HLC :Activates the High Light Compensation mode.

- User :Activates a user defined backlight compensation

mode.

Status

➡

Camera Setting

➡

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

Camera Setting

ATW

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

ATW

OFF

Medium

OFF

SSNR

- Auto :Automatically detects light levels and maintains a

clear picture at night or under low-light conditions.

- Sens-Up Limit :Adjusts to the maximum-powered zoom

per frame.

Medium

Day & Night

Others

SSNR

Day & Night

Others

➡

Notes

Exposure

ꢁ

ꢂ

ꢃ

ꢄ

Brightness

Iris

Shutter

Sens-Up

050

AUTO

---

ꢀ•ꢀꢀForꢀoptimalꢀperformanceꢀofꢀtheꢀA.FLKꢀmode,ꢀavoidꢀ

using the mode in conjunction with Backlight.

ꢀ•ꢀꢀWhileꢀtheꢀInternalꢀSyncꢀmodeꢀisꢀinꢀeffect,ꢀsettingꢀtheꢀ

shutter to '---' and facing the camera directly to a

bright light source may cause poor camera

performance.

AUTO

ꢀ•ꢀꢀSens-UpꢀisꢀdisabledꢀwhenꢀtheꢀshutterꢀisꢀinꢀManualꢀorꢀ

A.ꢀFLKꢀmode.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

4.2 WDR

4.3 HLC

▶

Main Menu/Camera Setting/Back Light/WDR

▶

Main Menu/Camera Setting/Back Light/HLC

When there are both bright and dark areas at the same time,

this mode makes both areas distinctive.

The HLC settings selectively eliminates high lights in a limited

environment such as the entrance to an apartment parking lot

or gas station, and is useful to detect a small objects like car

license plates.

HLC is disabled during the daytime.While monitoring

nighttime car traffic, if car headlamps reflect too bright lights

on the screen, the camera automatically eliminates the

headlamp lights and adjusts the colors of the license plate

accordingly.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Status

➡

WDR Off

WDR ON

Camera Setting

HLC Masking Area

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

SSNR

Day & Night

Others

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

SSNR

Day & Night

Others

Limit

ATW

Three WDR sensitivity levels are available in 3: Low,

Medium , and High.

Note that the higher the sensitivity level, the lower the

contrast in the light and dark areas becomes.

WDR

Medium

HLC

Medium

Level

Adjusts the screen brightness in WDR mode.

➡

Limit

HLC Setting

Adjusts the HLC sensitivity level.

WDR Setting

Mask Color

Adjusts the mask color on the highlighted area.

ꢁ

ꢂ

Limit

Mask Color

Medium

ꢁ

ꢂ

Limit

Level

Medium

Notes

ꢀ•ꢀꢀWDRꢀisꢀdisabledꢀifꢀtheꢀshutterꢀisꢀinꢀManualꢀmode.

ꢀ•ꢀꢀDuringꢀWDRꢀoperation,ꢀnoise,ꢀdiscoloration,ꢀspots,ꢀandꢀ

whitish symptoms may occur depending on lighting

conditions. If they occur, stop using WDR.

Notes

ꢀ•ꢀꢀEvenꢀifꢀHLCꢀisꢀon,ꢀcarꢀlicenseꢀplatesꢀmayꢀnotꢀbeꢀdetectableꢀdependingꢀonꢀtheꢀlocationꢀandꢀ

angle of the camera as well as the lighting condition.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

4.4 User Area Setting

5. AGC

▶

Main Menu/Camera Setting/Back Light/User

▶

Main Menu/Camera Setting/AGC

You can selectively choose a screen area to see objects within

the area more clearly than others.

AGC (Automatic Gain Control) adjusts the camera’s gain

control and the screen brightness if the camera has captured

an object under low-light conditions.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Four-direction Joystick Controls :

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

The Off, Low, Medium, High, and Manual modes are available.

- Moving the joystick in all four directions—upward,

downward, left, and right—adjusts the location and size

of a selected area.

Zoom Control :

- Zoom Tele : Enlarges the size of a selected area.

- Zoom Wide : Reduces the size of a selected area.

Status

➡

Camera Setting

➡

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

SSNR

Day & Night

Others

Camera Setting

ATW

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

USER

Medium

ATW

OFF

Medium

SSNR

Day & Night

Others

➡

↑:Up↓:Down ←:Left →:Right

W:Decrease T:Increase

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

6. SSNR (Samsung Super Noise Reduction)

7. Day & Night

▶

Main Menu/Camera Setting/SSNR

Main Menu/Camera Setting/Day & Night

The Day & Night function allows the camera to switch

between the Color and B/W modes.

Main Menu

SSNR significantly reduces the amount of low luminance noise.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

- Off : Disables the noise reduction function.

- Low : Reduces only a small amount of noise, but generates

almost no afterimage.

- Medium :The most commonly used mode. Reduces a suitable

amount of noise while generating a subtle

afterimage.

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Modes

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

- Auto : Operates in Color mode most times, and switches

to B/W mode if a low light level is detected during

nighttime.

- Color : Operates in Color mode at all times.

- B/W : Operates in B/W mode at all times. By using the

Burst On/Off sub menu, burst signals can be

retained or disabled.

Status

- High : Reduces noise significantly, but generates obvious

afterimages.

Status

➡

Camera Setting

✽ If the camera is in B/W mode and connected to equipment

that requires external sync through burst signals, set the

Burst On/Off option to “On.”

➡

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

SSNR

Day & Night

Others

Camera Setting

ATW

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

Duration

OFF

Medium

ATW

The camera’s light sensitivity is adjustable as in the chart

below.The camera’s ambient light diversion performance

may vary depending on its environment.

OFF

Medium

Color -> B/W

2.5 Lux

B/W -> Color

4 Lux

SSNR

Fast

Day & Night

Others

➡

Slow

0.8 Lux

6 Lux

Day & Night

Dwell Time

①

ꢂ

③

Mode

COLOR

The duration of both the lighting conditions can be

customized to let the camera divert between the daytime

and nighttime settings.

Duration

Dwell Time

FAST

0.5 SEC

Notes

ꢀ•ꢀꢀTheꢀAutoꢀmodeꢀisꢀdisabledꢀwhenꢀAGCꢀisꢀturnedꢀoff.ꢀThisꢀfunctionꢀisꢀonlyꢀavailableꢀwhenꢀ

the Color or B/W mode is selected.

Notes

ꢀ•ꢀꢀUsingꢀB/Wꢀmodeꢀunderꢀsunlightꢀorꢀaꢀhalogenꢀlampꢀmayꢀdecreaseꢀtheꢀfocusingꢀ

performance.

ꢀ•ꢀꢀSSNRꢀisꢀdisabledꢀwhenꢀtheꢀAGCꢀmodeꢀisꢀturnedꢀoff.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

8. Others

Sequence Setting

▶

Main Menu/Camera Setting/Others

9. Power On Resume and MD Dwell Time

Sync

: Enables selecting Internal Synchronization or the

Main Menu

▶

Main Menu/Sequence Setting

external Line Lock. (SPD-3750T not supported)

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

- Internal : Synchronizes the camera’s output timing to the

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Power On Resume

internal crystal.

Main Menu

This is useful when the power is disconnected and

reconnected due to power failures or other power

interruptions.

If the camera was performing a sequence action prior to a

power disconnection, the camera automatically resumes

the action when the power is reconnected.

- Line Lock : Synchronizes the camera’s output timing to

the AC adapter power to synchronize multiple

cameras.This option is useful when using a

switch such as Matrix Switcher.

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Status

- Line Lock Phase : Enables setting the adapter’s

synchronization phase between 0 and

360°.

➡

MD Dwell Time

Status

Stabilizer

: The Stabilizer compensates for any small

movements of the camera caused by due to

the wind and other reasonsor other causes.

Camera Setting

When Motion Detection under the Preset Edit menu is

selected, MD Dwell Time performs the Tour or Group

function.

①

ꢂ

③

④

ꢅ

ꢆ

⑦

⑧

Focus & Zoom

White Balance

Exposure

Back Light

AGC

SSNR

Day & Night

Others

➡

ATW

Sequence Setting

Notes

While the camera is performing a sequence action, if

motion is detected from a selected preset location, the

camera pauses the sequence action operation and starts

monitoring the location instead for a duration that is set

under the MD Dwell Time menu.

If the motion is no longer detectable or the duration

expires, the camera aborts the monitoring operation and

then resumes the sequence action.

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

OFF

Medium

Swing SEQ

Group SEQ

Tour SEQ

ꢀ•ꢀꢀTheꢀStabilizerꢀusesꢀtheꢀdigitalꢀzoomꢀandꢀmayꢀcauseꢀ

low picture quality.

ꢀ•ꢀꢀTheꢀStabilizerꢀisꢀdisabledꢀifꢀtheꢀambientꢀlightꢀisꢀtooꢀ

low.

ꢀ•ꢀꢀTheꢀStabilizerꢀisꢀdisabledꢀifꢀtheꢀfieldꢀofꢀviewꢀhasꢀveryꢀ

low or no contrast, e.g. The sky or a white wall.

PTZ Trace

Auto Run

Power On Resume

MD Dwell Time

➡

Others

Image Adj

ꢁ

ꢂ

③

ꢄ

ꢅ

Sync

INTERNAL

OFF

- Sharpness : Sharpens outlines of an image.

- Color :Adjusts the color density of an image.

Freeze

Stabilizer

Image Adj

Freeze

: Stops or reanimates an image.

OFF

Inner

Dome Cover

These settings are to optimize the camera’s focused object

position according to the dome cover type.

- Inner : Default dome cover type including the indoor flush

model. (Factory Release Mode)

- Outer : Dome cover type for outdoor housings except the

indoor flush model.

- None :When using the camera without a dome cover.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

10.2 Preset Edit

10. Preset

10.1 Preset Location Saving

▶

Main Menu/Sequence Setting/Preset/Edit

▶

Main Menu/Sequence Setting/Preset/Setting

You can edit the 13 preset items such as Pan/Tilt location,

Zoom and Focus, which are selected among camera functions.

Main Menu

①

②

Camera Setting

Sequence Setting

This function enables the memorization of a selected location

and activates the Pan,Tilt, and Zoom functions at that location.

Saved locations can be recalled using the Preset Execute

command.

Main Menu

PTZ

Recalls saved locations using the Preset Settings command.

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

....

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Focus Mode

➡

Refer to the section entitled Setting Up Your Camera.

Sequence Setting

Setting Up Preset Numbers

Brightness

①

②

③

Preset

Swing SEQ

Group SEQ

Selecting the Preset Setting menu brings up a screen as

shown below. Move the joystick in all four directions to

select the desired number.

Refer to the section entitled Setting Up Your Camera.

Status

Iris

....

Refer to the section entitled Setting Up Your Camera.

➡

Preset Setting

Preset = 001 (255)

Backlight

Sequence Setting

Preset

Refer to the section entitled Setting Up Your Camera.

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

ꢁ

ꢂ

③

ꢄ

ꢅ

ꢆ

Setting

Edit

Home Position

Execute

Clear

Status

Day & Night

Swing SEQ

Group SEQ

Tour SEQ

Refer to the section entitled Setting Up Your Camera.

OFF

Saving Preset Locations

After Act

Selecting a preset number and pressing the Enter key

redirects the menu to the screen shown below.

Using the joystick, adjust the location of the Pan and Tilt

functions and then set the Zoom and Focus command.

In Preset Settings, the Zoom and Focus command is

controllable only by the Zoom command.To switch

between Zoom and Focus, use the Preset 1 and 2

commands as shown below.

PTZ Trace

Auto Run

Enables setting up an automatic action after the camera

arrives at a selected preset location.

- TRACK : Commands the camera to perform the Auto

Tracking function.

- MD : Commands the camera to perform the Motion

Detection function.

- None : Select this when no action is desired.

Power On Resume

MD Dwell Time

➡

OFF

Preset Edit

Preset = 001* (1~255)

➡

Preset

➡

Preset Edit

[001]

ꢁ

ꢂ

ꢃ

ꢄ

ꢅ

Setting

Scene Adj

Edit

Enables setting the Shutter,AGC, SSNR, Sens-Up,White

Balance, and Stabilizer functions. For more information

about interface terminology, please refer to the section

entitled Setting Up Your Camera.

ꢁ

ꢂ

ꢃ

ꢄ

⑤

ꢆ

ꢇ

⑧

PTZ

271/045/1X

ONE SHOT AF

050

Execute

Clear

Status

Focus Mode

Brightness

Iris

Back Light

Day & Night B/W

Preset Setting Z>Z00M

AUTO

1+PST:ZOOM 2+PST:FOCUS

Use W/T Preset

After Act.

Scene Adj.

OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

10.3 Preset Name Setting

10.4 Preset Execution/Deletion/Memory Check

▶

Main Menu/OSD Setting/Preset Name/Edit

▶

Main Menu/Sequence Setting/Preset

Using this function, you can add names to preset locations.

up to 12 characters.

Once a name is entered, use the joystick and the Enter key to

perform the Set command and save the name.

Main Menu

Home Position

Sets one of the currently configured preset positions as the

home position.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Execute

Recalls a saved preset location.

Clear

Status

Deletes the selected preset location.

Status

➡

Opens a map of saved preset locations.

An area saved as a preset location is displayed with the

OSD Setting

➡

①

②

③

④

Camera ID

Sequence Setting

'■' icon.

Camera Name

Preset Number

Preset Name

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

Swing SEQ

Group SEQ

Tour SEQ

Preset Status

....

001 :

021 :

041 :

061 :

081 :

101 :

121 :

141 :

161 :

□□□□□ □□□□□ □□□□□ □□□□□

➡

PTZ Trace

Auto Run

□□□□□ □□□□□ □□□□□ □□□□□

Preset Name

Power On Resume

MD Dwell Time

ꢁ

ꢂ

ON/OFF

Edit

OFF

➡

Preset

Preset Edit

ꢁ

ꢂ

③

ꢄ

ꢅ

ꢆ

Setting

Preset = 001* (1~255)

Edit

➡

Home Position

Execute

Clear

OFF

Preset Status

PSET Name 001[

0123456789()[]#&%/~-=_

]

181 :

201 :

221 :

241 :

□□□□□ □□□□□ □□□□□ □□□□□

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz

äöÖüÄÜàâçéèêëîïôûôùÿñÑáí

óúÀÂÇÉÈÊËïïÔßŒæÑÛÙŸÁÍÓÚÂ

ABC->中文1 BACK SPACE CLR SET

Status

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

11. Swing SEQ

12. Group SEQ

▶

Main Menu/Sequence Setting/Swing SEQ

Main Menu/Sequence Setting/Group SEQ

Selecting Group SEQ recalls a group of multiple preset

locations in a consecutive manner.A group can contain up to

255 preset locations.

Main Menu

The Swing function commands the camera to move between 2

selected locations, monitoring the route.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Pan Swing

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Setting

Activates the Pan function for the Swing operation.

Tilt Swing

Using the joystick, enter desired preset numbers into the

PSET section. DWT indicates the camera’s duration of stay

at a preset location. SPD shows the camera’s movement

speed by 64 different levels.

Activates the Tilt function for the Swing operation.

P&T Swing

Status

Activates both the Pan and Tilt functions for the Swing

operation.

➡

Group SEQ 1

Sequence Setting

Swing Settings/Execute/Clear

Sequence Setting

PSET DWT(s) SPD

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

- Settings : Each of the Swing menus have sub menus with

001: *** : 003 : 64

002: *** : 003 : 64

003: *** : 003 : 64

004: *** : 003 : 64

005: *** : 003 : 64

006: *** : 003 : 64

007: *** : 003 : 64

Swing SEQ

Group SEQ

Tour SEQ

PTZ Trace

Auto Run

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

the settings.

Swing SEQ

Group SEQ

Tour SEQ

➡

Pan Swing

PTZ Trace

Auto Run

①

②

③

Setting

Execute

Clear

Power On Resume

MD Dwell Time

OFF

Power On Resume

MD Dwell Time

OFF

➡

Execute

➡

Group SEQ

Executes the group operation.

Clear

Pan Swing Setting

Swing SEQ

①

②

③

④

Group 1

Group 2

Group 3

Group 4

[001]←→[***]

Deletes the selected group.

①

②

③

Pan Swing

Tilt Swing

P&T Swing

SPEED=64 (1~64)

DWT =003(1~128)(s)

....

➡

Select 2 preset locations by using the joystick.

Speed indicates the camera’s movement speed. DWT indicates

the camera’s duration of stay at a preset location.

- Execute: Executes the Swing operation.

Group SEQ 1

ꢁ

ꢂ

ꢃ

Setting

Execute

Clear

- Clear: Deletes data in the Swing memory.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

13. Tour SEQ

14. PTZ Trace

▶

Main Menu/Sequence Setting/Tour SEQ

Main Menu/Sequence Setting/PTZ Trace

Selecting Tour SEQ recalls groups of preset locations in a

consecutive manner. Up to 6 groups can be listed for this

function.

Main Menu

Maximum 4 patterns of the manual operation paths (for Pan,

Tilt, Zoom and Focus) are memorized and replayed.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Replay

Settings

Replays a route saved by the Trace function. Use the Stop

button to stop the replay.

Selecting the Settings menu brings up the following screen.

Using the joystick, you can enter desired group numbers to

the Group section. DWT indicates the camera’s standby

time before a new group is recalled.

Memorize

Up to 120 seconds of a memory can be saved.The memory

duration varies depending on the difficulty level of the PTZ

Trace action. If the memory capacity is full, the Over

message appears and the memorization action is

terminated.

Status

➡

Tour SEQ

Sequence Setting

Group

DWT(s)

003

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

01: *

02: *

03: *

04: *

05: *

06: *

Swing SEQ

Group SEQ

Tour SEQ

Swing SEQ

Group SEQ

Tour SEQ

PTZ Trace

Auto Run

PTZ Trace

Auto Run

003

Power On Resume

MD Dwell Time

Power On Resume

MD Dwell Time

OFF

Execute

➡

Executes the group operation.

Clear

Tour SEQ

PTZ Trace

ꢁ

ꢂ

ꢃ

Setting

Execute

Clear

①

②

③

④

Trace 1

Trace 2

Trace 3

Trace 4

Deletes the selected group.

➡

PTZ Trace 1

ꢁ

ꢂ

Replay

Memorize

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

15. Auto Run

P/T Setting

▶

Main Menu/Sequence Setting/Auto Run

16. Pan/Tilt Limit

▶

Main Menu/P/T Setting/Pan/Tilt Limit

If there is no controller operation by the user for a certain time,

the sequence operation designated by the user will be

executed.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

The moving ranges in the Pan/Tilt directions can be limited.

Main Menu

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Mode

Position

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

- Home :Auto run Home Position (Refet to the Preset

Menu.)

Selecting the Position menu brings up the following screen

if it is for the Pan Limit setting. Move the joystick left and

right to select a movement range from the starting point to

the end.

- Preset :Auto run a selected preset number.

- Swing :Auto run a selected Swing mode.

- Group :Auto run a selected Group mode.

- Tour :Auto run a selected Tour mode.

- Trace :Auto run a selected trace mode.

- A.Pan :Auto run a 360-degree pan.To activate the

panning command, you need to set up the

camera's tilt angle and auto pan speed manually.

Status

➡

Start Limit

End Limit

Sequence Setting

➡

①

②

③

④

⑤

⑥

ꢇ

ꢈ

Preset

P/T Setting

⇨

Swing SEQ

Group SEQ

Tour SEQ

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

Enter: Set

ESC: Exit

Time

Enter: Set

ESC: Exit

PTZ Trace

Auto Run

Enables setting up an Auto Run duration. (The duration can

be 1~60 seconds, or 1~60 minutes.)

Digital Flip

Image Hold

The following picture shows the Tilt Limit setting.

Move the joystick left and right to select a movement

range from the starting point to the end.

Power On Resume

MD Dwell Time

OFF

Auto Track1

Auto Track2

➡

Start Limit

End Limit

Auto Run

➡

ꢁ

ꢂ

Mode

Time

OFF

30 SEC

Pan/Tilt Limit

①

②

Pan Limit

⇨

Tilt Limit

➡

Enter: Set

ESC: Exit

Enter: Set

ESC: Exit

Pan/Tilt Limit

On/Off

①

②

Position

ON/OFF

Cancels or activates the Pan/Tilt Limit functions.

OFF

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

17. Area Setting

18. Area Masking

▶

Main Menu/P/T Setting/Area Setting

Main Menu/P/T Setting/Area Masking

The Area Setting menu enables selecting certain locations in

the course of the Pan and Tilt operation, and then display the

areas with the OSD (On Screen Display) texts when the camera

passes through them. Up to 8 areas can be selected.

If a monitoring location includes a highly private area, the area

can be selectively excluded from monitoring.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Position

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

As shown in the picture below, move the joystick to select

the upper left corner and lower right corner of an area.

Area Name

You can add names to selected areas. Names can be up to

12 characters and can be entered via the joystick and the

Enter key. Once a name is entered, use the joystick and the

Enter key to perform the Set command and save the name.

Status

Start Position

End Position

➡

P/T Setting

⇨

Area Name 001[

]

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

Digital Flip

Image Hold

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

0123456789()[]#&%/~-=_

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz

äöÖüÄÜàâçéèêëîïôûôùÿñÑáí

óúÀÂÇÉÈÊËïïÔßŒæÑÛÙŸÁÍÓÚÂ

ABC->中文1 BACK SPACE CLR SET

Enter: Set

ESC: Exit

Enter: Set

ESC: Exit

OFF

Digital Flip

Image Hold

On/Off

OFF

Auto Track1

Auto Track2

Cancels or activates the Area Masking function.

Auto Track1

Auto Track2

Position

➡

As shown in the picture below, move the joystick to select

the upper left corner and lower right corner of an area.

➡

Area Setting

①

②

③

④

Area 1

Area 2

Area 3

Area 4

①

②

③

④

Mask 1

Mask 3

Mask 4

Start Position

End Position

....

⇨

....

➡

Area 1

➡

Enter: Set

ESC: Exit

Enter: Set

ESC: Exit

ꢁ

ꢂ

ꢃ

Area Name

Mask 1

Position

ON/OFF

ꢁ

ꢂ

Position

ON/OFF

On/Off

OFF

Cancels or activates the display function of selected areas.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

19. Prop. P/T

20. Digital Flip

▶

Main Menu/P/T Setting/Prop. P&T

Main Menu/P/T Setting/Digital Flip

This commands the camera to change the Pan and Tilt speed

automatically according to the current zoom power. Moving

the joystick clockwise (Tele) slows down and counterclockwise

(Wide) accelerates the Pan and Tilt speed, allowing detailed

adjustments.

Digital Flip is useful to monitor a moving object or a person

passing directly under the camera.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

When an object or a person passes directly under the camera,

the camera tilt monitor follows the object or person over 100

degrees to the other side of the tilt area without panning.The

screen inversion occurs at 100 degrees or higher and is

digitally adjusted.

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Turning this “Off” executes the function the optical 1x zoom

speed regardless of how high a the zoom power is.

Status

➡

P/T Setting

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

Digital Flip

Image Hold

Digital Flip

Image Hold

OFF

Auto Track1

Auto Track2

Auto Track1

Auto Track2

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

21. Image Holding

22. Auto Track 1 (SPD-3750T Only)

▶

Main Menu/P/T Setting/Image Hold

▶

Main Menu/P/T Setting/Auto Track1

When the camera is moving between preset locations, this

function stops a previous camera feed until the camera

reaches the next location.This is useful to help the screen

observer keep sharp eyes and to monitor multiple locations

within a network.

This function is available only with the SPD-3750T.

This commands the camera to automatically follow a moving

object or a person on the screen.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Auto Track

On/Off:Turns Auto Track on or off.

Camera Height

Status

Adjusts the height of the camera.Tracking performance

may decrease if the camera height is not adjusted properly.

Status

➡

Object Size

P/T Setting

Sets a maximum zoom power to zoom in on an object if

the Zoom function is used for the tracking operation.

- Small : Zooms in on a tracking object up to 1/4 of the

screen height.

- Medium : Zooms in on a tracking object up to 2/4 of the

screen height.

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

Digital Flip

Image Hold

Digital Flip

Image Hold

OFF

- Large : Zooms in on a tracking object up to 3/4 of the

screen height.

Auto Track1

Auto Track2

Auto Track1

Auto Track2

Sensitivity

The object detection sensitivity is adjustable. Lower the

sensitivity if the camera catches a swaying tree branch,

raindrops, or snowflakes during the Auto Track operation.

➡

Auto Track 1

ꢁ

ꢂ

ꢃ

ꢄ

ꢅ

ꢆ

ꢇ

ꢈ

Auto Track

OFF

Zoom Control

Camera Height

Object Size

Sensitivity

Zoom Control

Auto Release

Auto Return

Lost Mode

02.5M

SMALL

HIGH

OFF

The function’s zoom control settings are as follows.

- Off : Disables the Zoom control.

- One Shot : Performs the Zoom control once during the

Motion Detection and Auto Track operations.

Depending on the movement detection, the

camera performs the Zoom control multiple

times.

OFF

STOP

- Continuous : Performs the Zoom control continuously.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

Auto Release

23. Auto Track 2 (SPD-3750T Only)

Enables setting a maximum duration to follow an object.When the duration expires, the camera

▶

Main Menu/P/T Setting/Auto Track2

stops following the object and returns to the start position to follow another objects.

Auto Return

This function is available only with the SPD-3750T.

Auto Track 2 provides Auto Track related settings other than

the ones programmed in the Auto Track 1 menu.

Main Menu

- Off : Commands the camera to stay on a last spot instead of returning to the initial position.

- Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and

then return to the start position.

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Zone Setting

Lost Mode

- Position : Enables designating certain areas as zones for

the Auto Track operation.The setting procedures

are the same as for Area Mask.

- Mode :Two modes are available: Mask and Alarm. When

Mask is selected, the camera does not follow the

object entering the masked zone. This is useful if

the camera catches swaying objects such as tree

branches and flags during the Auto Track peration.

When Alarm is selected, the camera activates an

alarm if an object enters the zone.

Sets up an action for the camera in case the object it is following goes out of the detection

range.

- Stop : Commands the camera to stop and abort tracking at the spot where its object

Status

disappeared.

➡

- Research : Commands the camera to stop and standby at the spot where its object

disappeared.

P/T Setting

- Zoom-Out : Commands the camera to zoom out and look for a new object in case its current

object disappears.

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Pan/Tilt Limit

Area Setting

Area Masking

Prop. P/T

- On/Off :Activates or deactivates the Zone function.

Digital Flip

Image Hold

OFF

Track Zone

① Zone 1

Zone 1

Auto Track1

Auto Track2

① Position

② Zone 2

③ Zone 3

④ Zone 4

⑤ Zone 5

⑥ Zone 6

⑦ Zone 7

⑧ Zone 8

② Mode

MASK

OFF

③ ON/OFF

⇨

➡

Auto Track 2

①

ꢂ

ꢃ

Zone Setting

Indicator

OFF

Target Lock

Indicator

Indicates objects with icons on the screen.

- Off : Disables the Indicator function.

- On : Indicates both the pointer and target.

- Pointer : Indicates the indicator when following an object

using the joystick; shows as a cross in the center

of the screen.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

- Target : Indicates the camera’s target for the Auto Track operation; when a moving object is

detected, a square grid appears and surrounds the object.

OSD Setting

24. OSD Setting

Target Lock

▶

Main Menu/OSD Setting

Target Lock is useful to select and follow an object using the Auto Track mode while operating

the camera with the joystick.Target Lock can be turned On or Off.

To activate the Auto Track mode, turn on Target Lock, select an object to follow, and then press

Enter.

Camera ID

Main Menu

Displays or hides Camera ID in the upper left of the screen.

Camera Name

Add a name to the camera. (First check the Note.)

Preset Number

Displays or hides Preset Numbers on the screen.

Preset Name

Add names to preset locations. (First check the Note.)

Sequence Status

Displays or hides the status of a sequence action that is in

progress.

Area Name

Displays or hides the Area Name for the Area Settings on

the screen.

PTZ Position

Displays or hides the status of the Pan,Tilt, and Zoom

operation that is in progress.

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Status

➡

OSD Setting

①

②

③

ꢄ

ꢅ

ꢆ

⑦

⑧

Camera ID

Camera Name

Preset Number

Preset Name

Notes

Sequence Status ON

ꢀ•ꢀꢀAutoꢀTrackꢀisꢀspecificallyꢀtoꢀtrackꢀdownꢀintruders.ꢀThus,ꢀitꢀmayꢀnotꢀbeꢀsuitableꢀtoꢀmonitorꢀaꢀ

crowd.

ꢀ•ꢀꢀIfꢀtheꢀcameraꢀisꢀnotꢀsafelyꢀsecured,ꢀtrackingꢀerrorsꢀmayꢀoccur.

ꢀ•ꢀꢀIfꢀtheꢀcameraꢀlensꢀisꢀsmearedꢀwithꢀforeignꢀsubstancesꢀorꢀisꢀscratched,ꢀanꢀerrorꢀmayꢀ

occur causing the camera to not behave as expected.

ꢀ•ꢀꢀTheꢀcameraꢀmayꢀnotꢀfollowꢀanꢀobjectꢀorꢀtrackingꢀerrorsꢀmayꢀoccurꢀunderꢀtheꢀfollowingꢀ

conditions:

∙ If the contrast between an object and the background is low

∙ If the camera lens is smeared with foreign substances, e.g. raindrops or snowflakes

∙ If the lighting is changing dramatically

Area Name

PTZ Position

Language

OFF

English

Language

Enables changing the system language.This camera

supports English, Chinese, French, German, Spanish, and

Italian.

∙ If many movements around an object are detected

∙ If an object moves vertically on the optic angle of the camera

∙ If an object passes directly under the camera

∙ If an object creates inconsistent light levels, e.g. the object is too shiny or flickering

∙ In environments where there are light reflections causing internal reflections of camera,

e.g. windows, shiny road surfaces, and backlights

∙ If an object moves behind large and tall objects, e.g. telephone poles

∙ If an object moves too quickly

∙ If the camera is vibrating

XXX Name 001[

0123456789()[]#&%/~-=_

]

✽

When selecting the Camera Name and Preset

Name, the screen displays the Left keypad.

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz

äöÖüÄÜàâçéèêëîïôûôùÿñÑáí

óúÀÂÇÉÈÊËïïÔßŒæÑÛÙŸÁÍÓÚÂ

ABC->中文1 BACK SPACE CLR SET

Names can be up to 12 characters and can be

entered via the joystick and the Enter key. Once a

name is entered, use the joystick and the Enter key

to perform the Set command and save the name.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

Alarm Setting

Notes

25. Alarm Setting

25.1. Setting Up Alarm Input

ꢀ•ꢀꢀAsꢀshownꢀinꢀtheꢀpictureꢀabove,ꢀtheꢀAlarmꢀInputꢀmustꢀbeꢀenteredꢀwithꢀtheꢀOpenꢀandꢀCloseꢀ

switch signals. Supplying power without entering the signals may damage the product.

▶

Main Menu/Alarm Setting/Alarm Input

P (Priority)

Alarm Enable

Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,

the alarm with the highest priority activates before the others. Once the alarm is canceled, the

next highest priority alarm activates.

Main Menu

- On/Off : Enables or disables the Alarm function.

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

MOD

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Enables selecting an Alarm Input method.

- NO (Normally Open)

SEQ

Enables setting up a sequence action for the camera in response to an alarm.Available

sequence actions are Preset, Swing, Group,Tour,Trace and A.Pan.

IN 1.2.3.4

ALM GND

Status

⇨

ALM GND

➡

Alarm Setting

ꢁ

②

③

④

Alarm Enable

Alarm Input

Alarm Output

Aux Output

OFF

ALARM OFF

ALARM ON

- NC (Normally Closed)

➡

ALM MOD P SEQ. NO

IN 1.2.3.4

ALM GND

ꢁ

ꢂ

ꢃ

ꢄ

IN1 OFF 1

IN2 OFF 2

IN3 OFF 3

IN4 OFF 4

OFF

⇨

ALM GND

ALARM OFF

ALARM ON

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

25.2. Alarm Output

25.3. Aux Output

▶

Main Menu/Alarm Setting/Alarm Output

Main Menu/Alarm Setting/Aux Output

Setting 1,2

Main Menu

Enables selecting an Alarm Output method.

- 1, 2, 3, 4, and MD on the menu selection indicate the

alarm input port and motion detection input. Up to 4

alarm inputs can be set for each MD (Motion Detection)

and TRK (Auto Track). 1 alarm output port can be used for

more than 2 alarm inputs along with ones for MD and

TRK.

AUX Output menu is to operate the camera’s peripheral

devices such as lamps and sirens through the controller and

switches as well as through network communications.

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

On/Off

- Cancels or activates the Aux function.

Time

Status

Enables setting up a duration for the Aux output when the

Aux command is transmitted from the controller.A

duration can be selected from a minimum of 1 second to a

maximum of 60 minutes.

✽The TRK function becomes activated only if the Zone mode

under Zone Settings under Auto Track 2 is set to Alarm.

Status

➡

Timer

Alarm Setting

Enables selecting an Alarm Output method.

- On : Retains an alarm output for a set duration from a

minimum of 1 second to a maximum of 60 hours

upon the alarm occurrence.

- Momentary : Retains an alarm output only until the alarm

is canceled.

✽The Alarm Output is equipped with a relay circuit.The

operation of the alarm output port is as shown in the

diagram below.

ꢁ

②

③

④

Alarm Enable

Alarm Input

Alarm Output

Aux Output

OFF

ꢁ

②

③

④

Alarm Enable

Alarm Input

Alarm Output

Aux Output

OFF

COM

⇨

AUX Off

AUX On

➡

Alarm Output

➡

ꢁ

ꢂ

ꢃ

ꢄ

Setting1

Setting2

Timer

□1 □2 □3 □4

1 OFF

□

□TRK

TRK

AUX Output

□

ꢁ

ꢂ

On/Off

Time

OFF

00 SEC

Timer

1 OFF

COM

⇨

Alarm Out OFF

Alarm Out ON

Notes

ꢀ•ꢀꢀConnectingꢀtheꢀpowerꢀconnectorꢀandꢀGNDꢀincorrectlyꢀtoꢀtheꢀAuxꢀterminal’sꢀNOꢀandꢀCOMꢀ

ports may cause a short circuit and fire, damaging the camera.

ꢀ•ꢀꢀTheꢀmaximumꢀpowerꢀcapacityꢀofꢀtheꢀbuilt-inꢀrelayꢀisꢀ30VDC/2A,ꢀ125VAC/0.5A,ꢀandꢀ

250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s

lifespan and damage it.

ꢀ•ꢀꢀConnectingꢀtheꢀpowerꢀconnectorꢀandꢀGNDꢀincorrectlyꢀtoꢀtheꢀNC/NOꢀandꢀCOMꢀportsꢀmayꢀ

cause a short circuit and fire, damaging the camera.

ꢀ•ꢀꢀTheꢀmaximumꢀpowerꢀcapacityꢀofꢀtheꢀbuilt-inꢀrelayꢀisꢀ30VDC/2A,ꢀ125VAC/0.5A,ꢀandꢀ

250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s

lifespan and damage it.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Description

Operating Your Camera

✽Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in the middle of a

sequence action, the camera pauses the sequence action and performs an Auto Refresh, then

resumes the sequence action once the refresh is complete.

Initialize

26. Initialization Menu

▶

Main Menu/Initialize

Auto Track Default

Power On Reset

Enables resetting the Auto Track settings.

Main Menu

Restarts the camera.

Factory Default

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Enables resetting the camera to its factory default settings.

When the mode is selected, all custom data such as preset

locations is deleted from the camera.

Use this function if it is necessary to reset the settings of

the camera.

Status

Camera Default

➡

This mode can be used if the camera module has been

replaced and you want to keep the camera's existing

settings for the new module.

To do reset the camera, first replace the old module with a

new camera module.When the replacement is properly

installed, turn on the module, then execute this command.

Initialize

①

②

③

ꢄ

⑤

Power On Reset

Factory Default

Camera Default

Auto Refresh

OFF

Auto Refresh

Auto Track Default

Enables optimizing the status of the camera’s built-in

electric circuits and components on a regular basis. (A

regular operation can be scheduled.)

This mode can be used to maintain and repair the current

settings of the camera when anomalous operations occur:

e.g.The camera happened to directly face a light source, or

the settings have been canceled after the camera

repeatedly rotated in all four directions for a long time to

monitor a specific location.

The default setting is Off.

- Off, 1~7 Days: Selecting Off disables Auto Refresh and but

automatically executes it after 1~7 Days days has passed.

action once the refresh is complete.

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating Your Camera

Product Specification

SPD-3750T

SPD-3750

1/4 inch, Double Density Interline Transfer CCD

NTSC / PAL

NTSC:811(H) x 508(V) / PAL:795(H) x 596(V)

NTSC:768(H) x 494(V) / PAL:752(H) x 582(V)

2:1 Interlace

SPD-3350

Status

Imaging Device

TV Standard

Total Pixels

27. Status

▶

Main Menu/Status

Effective Pixels

Scanning System

Synchronization

Horizontal Scan Rate

Vertical Scan Rate

Horizontal Resolution

Displays the settings and version of the dome camera.

Cam Model

Internal

Internal/External(AC Line Lock)

NTSC:15.734 KHz / PAL:15.625 KHz

NTSC:59.94 Hz / PAL: 50 Hz

Main Menu

①

②

③

④

⑤

⑥

ꢇ

Camera Setting

550 TV Line(Color)/680 TV Line(B/W)

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Indicates the model name of the camera.

Cam Version

0.7 Lux @ F1.6 ( Color ), 0.002Lux @ F1.6 (Sens-up 256X)

Min. Illumination

0.03 Lux @ F1.6 ( B/W )

50 dB

CVBS:1.0Vp-p/75Ω

Indicates the software version of the camera.

Dome Version

S/N (Y Signal)

Video Output

Zoom Ratio

Focal Length

Min. Object Distance

Angular Field

of view

37X (Optical),12X (Digital)

3.5~129.5mm (F1.6 ~3.9)

33X (Optical),12X (Digital)

3.5~115.5mm (F1.6 ~3.6)

Indicates the version of the camera control board.

CON Protocol

Status

1.9m

Indicates the status of the current protocol.

Dome ID

➡

H:55.5°(Wide)~1.59°(Tele)

V:42.5°(Wide)~1.19°(Tele)

H:55.5°(Wide)~1.77°(Tele)

V:42.5°(Wide)~1.33°(Tele)

Camera Status

Focus

Zoom Speed

IRIS

AUTO / MANUAL / ONE-SHOT

2.5sec

Dome Camera ID

Controller

CAM MODEL

= 37PC

AUTO/MANUAL

Built-In

CAM VERSION = 2.3

Indicates the settings of the current communications mode.

Track Version

Lens Initialization

Auto Tracking

Horizontal

DOME VERSION = 0.10

CON PROTOCOL = SAMSUNG TW

Built-In

Indicates the Auto Track software version of the camera.

360° Endless

DOME ID

= 001

Rotation Angle

Horizontal

CONTROLLER

= Simplex-9600

Manual:0.024°/sec ~120°/sec, Preset 500°/sec

Rotation Speed

Vertical Rotation Angle

Vertical Rotation Speed

Preset Position

Preset Accuracy

Camera ID

TRACK VERSION= 0.10

-5° ~ 185°

Manual:0.024°/sec ~120°/sec, Preset 500°/sec

255

0.1°

255

Day & Night

Backlight

Dynamic Range

Motion Detection

Stabilizer

AUTO / COLOR / BW

WDR / USER / HLC / OFF

52dB

ON/OFF

Privacy Mask

SSNR

Sens-up

Gain Control

White Balance

ON/OFF (8 Areas)

LOW/MEDIUM/HIGH/OFF

On/Off (Selectable limit ~ 256X )

LOW/MEDIUM/HIGH/MANUAL/OFF

ATW/INDOOR/OUTDOOR/AWC/MANUAL

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

DECLARATION OF CONFORMITY

Product Specification

Application of Council Directive(s)

EMC-Directive 92/31 EEC and its amendments

Electronic Shutter

Serial Com.

Protocol

Alarm

Digtal Flip

Operating Temperature/

Humidity

Storage Temperature/

Humidity

Input Voltage

Power Consumption

External Dimensions

(Ø×D)

AUTO(NTSC:1/60~120,000sec, PAL:1/50~120,000sec)/MANUAL/A.FLK

Manufacturer's Name

Manufacturer's Address

ꢀ

SAMSUNG TECHWIN CO., LTD

42,ꢀSUNGJU-DONGꢀCHANGWON-CITY,

KYUNGNAM,ꢀKOREA,ꢀ641-716

RS-422/485

Samsung Techwin, Pelco-D, Pelco-P, Panasonic, Honeywell,AD,Vicon, Samsung Electronics

4 In, 2 Out, 1 Aux

ON/OFF

℃

-10 to +50 / 20% to 80% RH

ꢀ

℃

-20 to +60 / 20% to 95% RH

European Representative Name

European Representative Address

Equipment Type/Environment

Model Name

AC24V 10%

Max. 15W

Max. 13W

Ø155×243.4mm

2Kg

Dome Camera

SPD-3750T/3750/3350

S8110001

Weight

Beginning Serial NO.

YearꢀofꢀManufactureꢀꢀ

Conformance to

2008.11.29

EN 55022 : 2006

EN 50130-4 : 2003

We, the undersigned, hereby declare that the equipment specified above conforms

to the above Directive(s).

Manufacturer SAMSUNG TECHWIN CO., LTD

Signature

Legal Representative in Europe

Signature

FullꢀNameꢀꢀ

Positionꢀꢀ

Placeꢀ

FullꢀNameꢀꢀ

Positionꢀꢀ

Placeꢀꢀ

HANꢀSEUGꢀKIMꢀ

QUALITYꢀCONTROLꢀMANAGERꢀꢀ

CHANGWON,ꢀKOREAꢀ

2008.11.29

Date

SPEED DOME CAMERA

User’s Manual

SPEED DOME CAMERA

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

RCA Home Theater System RTD316W User Guide
Remington Styling Iron CI 75i User Guide
Rockford Fosgate Stereo Amplifier T400 2 User Guide
Roland Printer PNC 5000 User Guide
Samsung Cell Phone E1100T User Guide
Samsung Clothes Dryer DC68 02347B EN User Guide
Samsung Network Router SCS26UC4 User Guide
Samsung Washer r1031gws User Guide
Sears Lawn Sweeper 45 02181 User Guide
Sears Washer 1104779 User Guide