Samsung Laptop C670 User Guide

User’s Manual  
Satellite C670/C675/C670D/C675D  
Satellite Pro C670/C675/C670D  
Satellite L770/L775/L770D/L775D  
Satellite Pro  
L770/L775/L770D/L775D  
Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power conditions for Satellite C670/C675/C670D/C675D/Satellite Pro  
C670/C675/C670D .................................................................................. 5-1  
Power conditions for Satellite L770/L775/L770D/L775D/satellite Pro  
L770/L775/L770D/L775D........................................................................ 5-2  
Monitoring of power condition for Satellite  
C670/C675/C670D/C675D/Satellite Pro C670/C675/C670D................. 5-4  
Monitoring of power condition for Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D ........ 5-5  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Copyright  
© 2011 by TOSHIBA Corporation. All rights reserved. Under the copyright  
laws, this manual cannot be reproduced in any form without the prior  
written permission of TOSHIBA. No patent liability is assumed, with respect  
to the use of the information contained herein.  
First edition Feb. 2011  
Copyright authority for music, movies, computer programs, databases and  
other intellectual property covered by copyright laws belongs to the author  
or to the copyright owner. Copyrighted material can be reproduced only for  
personal use or use within the home. Any other use beyond that stipulated  
above (including conversion to digital format, alteration, transfer of copied  
material and distribution on a network) without the permission of the  
copyright owner is a violation of copyright or author's rights and is subject to  
civil damages or criminal action. Please comply with copyright laws in  
making any reproduction from this manual.  
Disclaimer  
This manual has been validated and reviewed for accuracy. The  
instructions and descriptions it contains are accurate for your computer at  
the time of this manual’s production. However, succeeding computers and  
manuals are subject to change without notice. TOSHIBA assumes no  
liability for damages incurred directly or indirectly from errors, omissions or  
discrepancies between the computer and the manual.  
Trademarks  
Intel, Intel SpeedStep, Intel Core and Centrino are trademarks or registered  
trademarks of Intel Corporation.  
AMD, the AMD Arrow logo, AMD Athlon, AMD Turion, PowerPlay, Vari-  
Bright and combinations thereof are trademarks of Advanced Micro  
Devices, Inc.  
Windows, Microsoft and Windows logo are registered trademarks of  
Microsoft Corporation.  
Bluetooth is a trademark owned by its proprietor and used by TOSHIBA  
under license.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC.  
Manufactured under license from Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of Dolby Laboratories.  
ConfigFree is a trademark of TOSHIBA Corporation.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
       
TouchPad is a trademark of Synaptics, Inc  
Wi-Fi is a registered trademark of the Wi-Fi Alliance.  
Secure Digital and SD are trademarks of SD Card Association.  
Memory Stick and Memory Stick PRO are trademarks or registered  
trademarks of Sony Corporation.  
MultiMediaCard and MMC are trademarks of MultiMediaCard Association.  
Atheros is a registered trademark of Atheros Communication, Inc.  
Realtek is a registered trademark of Realtek Semiconductor Corporation.  
Other trademarks and registered trademarks not listed above may be used  
in this manual.  
FCC information  
FCC notice "Declaration of Conformity Information"  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Only peripherals complying with the FCC class B limits may be attached to  
this equipment. Operation with non-compliant peripherals or peripherals  
not recommended by TOSHIBA is likely to result in interference to radio  
and TV reception. Shielded cables must be used between the external  
devices and the computer’s External RGB monitor port, Universal Serial  
Bus (USB 2.0 and 3.0) ports, HDMI port and microphone jack. Changes or  
modifications made to this equipment, not expressly approved by  
TOSHIBA or parties authorized by TOSHIBA could void the user’s authority  
to operate the equipment.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
 
FCC conditions  
This device complies with part 15 of the FCC Rules. Operation is subject to  
the following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Contact  
Address:  
TOSHIBA America Information Systems, Inc.  
9740 Irvine Boulevard  
Irvine, California 92618-1697  
(949) 583-3000  
Telephone:  
EU Declaration of Conformity  
This product is carrying the CE-Mark in accordance with  
the related European Directives. Responsible for CE-  
Marking is TOSHIBA Europe GmbH, Hammfelddamm 8,  
41460 Neuss, Germany. The complete and official EU  
Declaration of Conformity can be found on TOSHIBA’s  
web site http://epps.toshiba-teg.com on the Internet.  
CE compliance  
This product is labelled with the CE Mark in accordance with the related  
European Directives, notably Electromagnetic Compatibility Directive  
2004/108/EC for the notebook and the electronic accessories including the  
supplied power adapter, the Radio Equipment and Telecommunications  
Terminal Equipment Directive 1999/5/EC in case of implemented  
telecommunication accessories and the Low Voltage Directive 2006/95/EC  
for the supplied power adapter. Furthermore the product complies with the  
Ecodesign Directive 2009/125/EC (ErP) and its related implementing  
measures.  
This product and the original options are designed to observe the related  
EMC (Electromagnetic Compatibility) and safety standards. However,  
TOSHIBA cannot guarantee that this product still observes these EMC  
standards if options or cables not produced by TOSHIBA are connected or  
implemented. In this case the persons who have connected/implemented  
those options/cables have to provide assurance that the system (PC plus  
options/cables) still fulfils the required standards. To avoid general EMC  
problems, the following guidance should be noted:  
Only CE marked options should be connected/implemented  
Only best shielded cables should be connected  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
 
Working environment  
This product was designed to fulfil the EMC (Electromagnetic Compatibility)  
requirements to be observed for so-called “Residential, commercial and  
light industry environments”. TOSHIBA do not approve the use of this  
product in working environments other than the above mentioned  
“Residential, commercial and light industry environments”.  
For example, the following environments are not approved:  
Industrial Environments (e.g. environments where a mains voltage of  
380 V three-phase is used)  
Medical Environments  
Automotive Environments  
Aircraft Environments  
Any consequences resulting from the use of this product in working  
environments that are not approved are not the responsibility of TOSHIBA.  
The consequences of the use of this product in non-approved working  
environments may be:  
Interference with other devices or machines in the near surrounding  
area.  
Malfunction of, or data loss from, this product caused by disturbances  
generated by other devices or machines in the near surrounding area.  
Therefore TOSHIBA strongly recommend that the electromagnetic  
compatibility of this product should be suitably tested in all non-approved  
working environments before use. In the case of automobiles or aircraft, the  
manufacturer or airline respectively should be asked for permission before  
use of this product.  
Furthermore, for general safety reasons, the use of this product in  
environments with explosive atmospheres is not permitted.  
Canadian regulatory information (Canada only)  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulation of the Canadian Department of Communications.  
Note that Canadian Department of Communications (DOC) regulations  
provide, that changes or modifications not expressly approved by  
TOSHIBA Corporation could void your authority to operate this equipment.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causng Equipment Regulations.  
Cet appareil numérique de la class B respecte toutes les exgences du  
Règlement sur le matériel brouileur du Canada.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii  
 
Following information is only valid for EU-member States:  
Disposal of products  
The crossed out wheeled dust bin symbol indicates that  
products must be collected and disposed of separately from  
household waste. Integrated batteries and accumulators  
can be disposed of with the product. They will be separated  
at the recycling centres.  
The black bar indicates that the product was placed on the  
market after August 13, 2005.  
By participating in separate collection of products and  
batteries, you will help to assure the proper disposal of  
products and batteries and thus help to prevent potential  
negative consequences for the environment and human  
health.  
For more detailed information about the collection and  
recycling programmes available in your country, please visit  
our website (http://eu.computers.toshiba-europe.com) or  
contact your local city office or the shop where you  
purchased the product.  
Disposal of batteries and/or accumulators  
The crossed out wheeled dust bin symbol indicates that  
batteries and/or accumulators must be collected and  
disposed of separately from household waste.  
If the battery or accumulator contains more than the  
specified values of lead (Pb), mercury (Hg), and/or cadmium  
(Cd) defined in the Battery Directive (2006/66/EC), then the  
chemical symbols for lead (Pb), mercury (Hg) and/or  
cadmium (Cd) will appear below the crossed out wheeled  
dust bin symbol.  
By participating in separate collection of batteries, you will  
help to assure the proper disposal of products and batteries  
and thus help to prevent potential negative consequences  
for the environment and human health.  
For more detailed information about the collection and  
recycling programmes available in your country, please visit  
our website (http://eu.computers.toshiba-europe.com) or  
contact your local city office or the shop where you  
purchased the product.  
These symbols may not stick depending on the country and region where  
you purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
 
Disposing of the computer and the computer's batteries  
Discard this computer in accordance with applicable laws and  
regulations. For further information, contact your local government.  
This computer contains rechargeable batteries. After repeated use, the  
batteries will finally lose their ability to hold a charge and you will need  
to replace them. Under certain applicable laws and regulation, it may be  
illegal to dispose of old batteries by placing them in the trash.  
Please be kind to our shared environment. Check with your local  
government authority for details regarding where to recycle old batteries  
or how to dispose of them properly.  
REACH - Compliance Statement  
The new European Union (EU) chemical regulation, REACH (Registration,  
Evaluation, Authorization and Restriction of Chemicals), entered into force  
on 1 June 2007. TOSHIBA will meet all REACH requirements and is  
committed to provide our customers with information about the chemical  
substances in our products according to REACH regulation.  
Please consult the following website www.toshiba-  
europe.com/computers/info/reach for information about the presence in our  
articles of substances included on the candidate list according to article  
59(1) of Regulation (EC) No 1907/2006 („REACH“) in a concentration  
above 0.1 % weight by weight.  
Following information is only for Turkey:  
Compliant with EEE Regulations: TOSHIBA meets all requirements of  
Turkish regulation 26891 “Restriction of the use of certain hazardous  
substances in electrical and electronic equipment”.  
The number of possible pixel failures of your display is defined  
according to ISO 13406-2 standards. If the number of pixel failures is  
less than this standard, they will not be counted as defect or failure.  
Battery is a consumption product, since the battery time depends on the  
usage of your computer. If the battery can not be charged at all, then it  
is a defect or failure. The changes in battery time is not a defect or  
failure.  
Optical disc drive safety instructions  
Be sure to check the precautions at the end of this section.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
       
The drive model employs a laser system. To ensure proper use of this  
product, please read this instruction manual carefully and retain for  
future reference. Should the unit ever require maintenance, contact an  
authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
1. Panasonic System Networks  
DVD SuperMulti with Double Layer UJ8A0  
BD-Combo UJ141  
BD-Writer UJ240  
Location of the required label  
on the optical disc drive  
2. HITACHI-LG Data Storage, Inc.  
DVD SuperMulti with Double Layer GT30N/30F  
BD-Combo CT31F  
BD-Writer BT11F  
Hitachi-LG Data Storage, Inc.  
22-23,KAIGAN 3-CHOME,  
MINATO-KU,TOKYO,108-0022  
JAPAN  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xi  
3. TOSHIBA Samsung Storage Technology  
DVD SuperMulti with Double Layer TS-L633F/L633W  
TOSHIBA SAMSUNG STORAGE  
TECHNOLOGY KOREA  
CORPORATION 416, MEATAN-3  
DONG, YEONGTONG-GU, SUWON  
CITY, GYEONGGI, 443-742, KOREA  
4. Sony Optiarc Inc.  
DVD SuperMulti with Double Layer AD-7710/7713  
Complies with 21 CFR, Chapter 1,  
Subchapter J.  
Sony Optiarc Inc.  
1-11-1 Osaki Shinagawa-ku, Tokyo,  
141-0032, Japan  
Precautions  
CAUTION: This appliance contains a  
laser system and is classified as a  
“CLASS 1 LASER PRODUCT.To use  
this model properly, read the  
instruction manual carefully and keep  
this manual for your future reference.  
In case of any trouble with this model,  
please contact your nearest  
“AUTHORIZED service station.” To  
prevent direct exposure to the laser  
beam, do not try to open the  
enclosure.  
User’s Manual  
xii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preface  
Congratulations on your purchase of this computer. This powerful notebook  
computer provides excellent expansion capability, includes multimedia  
functionality, and is designed to provide years of reliable, high-performance  
computing.  
This manual tells how to set up and begin using your computer. It also  
provides detailed information on configuring your computer, basic  
operations and care, using optional devices and troubleshooting.  
Conventions  
This manual uses the following formats to describe, identify, and highlight  
terms and operating procedures.  
Abbreviations  
On first appearance, and whenever necessary for clarity, abbreviations are  
enclosed in parentheses following their definition. For example: Read Only  
Memory (ROM). Acronyms are also defined in the Glossary.  
Icons  
Keys  
Icons identify ports, dials, and other parts of your computer. The indicator  
panel also uses icons to identify the components it is providing information  
on.  
The keyboard keys are used in the text to describe many computer  
operations. A distinctive typeface identifies the key top symbols as they  
appear on the keyboard. For example, ENTER identifies the ENTER key.  
Key operation  
Some operations require you to simultaneously use two or more keys. We  
identify such operations by the key top symbols separated by a plus sign  
(+). For example, CTRL + C means you must hold down CTRL and at the  
same time press C. If three keys are used, hold down the first two and at  
the same time press the third.  
ABC  
When procedures require an action such as  
clicking an icon or entering text, the icon's name or  
the text you are to type in is represented in the  
typeface you see to the left.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiii  
   
Display  
Names of windows or icons or text generated by  
the computer that appear on its display screen are  
presented in the type face you see to the left.  
S
ABC  
Messages  
Messages are used in this manual to bring important information to your  
attention. Each type of message is identified as shown below.  
Indicates a potentially hazardous situation, which could result in death or  
serious injury, if you do not follow instructions.  
Pay attention! A caution informs you that improper use of equipment or  
failure to follow instructions may cause data loss or damage your  
equipment.  
Please read. A note is a hint or advice that helps you make best use of your  
equipment.  
Terminology  
This term is defined in this document as follows:  
Start  
The word "Start" refers to the "  
Windows 7.  
" button in  
HDD or Hard disk drive Some models are equipped with a "Solid State  
Drive (SSD)" instead of a hard disk drive. In this  
manual, the word "HDD" or "Hard disk drive"  
also refers to the SSD unless otherwise stated.  
Illustration  
In this manual, situations where the port and  
connector locations for this series are different,  
the locations are shown in the illustrations only  
for some models.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiv  
General Precautions  
TOSHIBA computers are designed to optimize safety, minimize strain and  
withstand the rigors of portability. However, certain precautions should be  
observed to further reduce the risk of personal injury or damage to the  
computer.  
Be certain to read the general precautions below and to note the cautions  
included in the text of the manual.  
Provide adequate ventilation  
Always make sure your computer and AC adaptor have adequate  
ventilation and are protected from overheating when the power is turned on  
or when an AC adaptor is connected to a power outlet (even if your  
computer is in Sleep Mode). In this condition, observe the following:  
Never cover your computer or AC adaptor with any object.  
Never place your computer or AC adaptor near a heat source, such as  
an electric blanket or heater.  
Never cover or block the air vents including those located at the base of  
the computer.  
Always operate your computer on a hard flat surface. Using your  
computer on a carpet or other soft material can block the vents.  
Always provide sufficient space around the computer.  
Overheating your computer or AC adaptor could cause system failure,  
computer or AC adaptor damage or a fire, possibly resulting in serious  
injury.  
Creating a computer-friendly environment  
Place the computer on a flat surface that is large enough for the computer  
and any other items you are using, such as a printer.  
Leave enough space around the computer and other equipment to provide  
adequate ventilation. Otherwise, they may overheat.  
To keep your computer in prime operating condition, protect your work area  
from:  
Dust, moisture, and direct sunlight.  
Equipment that generates a strong electromagnetic field, such as  
stereo speakers (other than speakers that are connected to the  
computer) or speakerphones.  
Rapid changes in temperature or humidity and sources of temperature  
change such as air conditioner vents or heaters.  
Extreme heat, cold, or humidity.  
Liquids and corrosive chemicals.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xv  
     
Stress injury  
Carefully read the Instruction Manual for Safety and Comfort. It contains  
information on the prevention of stress injuries to your hands and wrists  
that can be caused by extensive keyboard use. It also includes information  
on work space design, posture and lighting that can help reduce physical  
stress.  
Heat injury  
Avoid prolonged physical contact with the computer. If the computer is  
used for long periods, its surface can become very warm. While the  
temperature will not feel hot to the touch, if you maintain physical  
contact with the computer for a long time, for example if you rest the  
computer on your lap or if you keep your hands on the palm rest, your  
skin might suffer a low-heat injury.  
If the computer has been used for a long time, avoid direct contact with  
the metal plate supporting the various interface ports as this can  
become hot.  
The surface of the AC adaptor can become hot when in use but this  
condition does not indicate a malfunction. If you need to transport the  
AC adaptor, you should disconnect it and let it cool before moving it.  
Do not lay the AC adaptor on a material that is sensitive to heat as the  
material could become damaged.  
Pressure or impact damage  
Do not apply heavy pressure to the computer or subject it to any form of  
strong impact as this can damage the computer's components or otherwise  
cause it to malfunction.  
Mobile phones  
Please be aware that the use of mobile phones can interfere with the audio  
system. The operation of the computer will not be impaired in any way, but  
it is recommended that a minimum distance of 30cm is maintained between  
the computer and a mobile phone that is in use.  
Instruction Manual for Safety and Comfort  
All important information on the safe and proper use of this computer is  
described in the enclosed Instruction Manual for Safety and Comfort. Be  
sure to read it before using the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xvi  
         
Chapter 1  
G
1
r
e
t
p
a
h
C
etting Started  
This chapter provides an equipment checklist, and basic information to start  
using your computer.  
Some of the features described in this manual may not function properly if  
you use an operating system that was not pre-installed by TOSHIBA.  
Equipment checklist  
Carefully unpack your computer, taking care to save the box and packaging  
materials for future use.  
Hardware  
Check to make sure you have all the following items:  
TOSHIBA Portable Personal Computer  
AC adaptor and power cord (2-pin plug or 3-pin plug)  
Battery pack  
Documentation  
User Information Guide  
Instruction Manual for Safety and Comfort  
If any of the items are missing or damaged, contact your dealer  
immediately.  
Software  
The following Windows® operating system and utility software are pre-  
installed.  
Windows 7  
TOSHIBA Recovery Media Creator  
TOSHIBA Assist  
TOSHIBA ConfigFree™  
TOSHIBA Flash Cards  
TOSHIBA Disc Creator  
TOSHIBA VIDEO PLAYER  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-1  
       
WinDVD BD for TOSHIBA  
TOSHIBA Resolution+ Plug-in For Windows Media Player  
TOSHIBA eco Utility  
TOSHIBA Bulletin Board  
TOSHIBA ReelTime  
TOSHIBA HW Setup Utility  
TOSHIBA Value Added Package  
TOSHIBA Web Camera Application  
TOSHIBA Face Recognition  
TOSHIBA Service Station  
TOSHIBA PC Health Monitor  
TOSHIBA Sleep Utility  
Online Manual  
TOSHIBA Portable Personal Computer User's Manual (This manual)  
* You may not have all the softwares listed above depending on the model  
you purchased.  
Getting Started  
All users should be sure to read the section Starting up for the first time.  
Be sure to read the enclosed Instruction Manual for Safety and Comfort  
for information on the safe and proper use of this computer. It is  
intended to help you be more comfortable and productive while using a  
notebook computer. By following the recommendations in it you may  
reduce your chance of developing a painful or disabling injury to your  
hand, arms, shoulders or neck.  
This section provides basic information to start using your computer. It  
covers the following topics:  
Connecting the AC adaptor  
Opening the display  
Turning on the power  
Starting up for the first time  
Turning off the power  
Restarting the computer  
Use a virus-check program and make sure it is updated regularly.  
Never format storage media without checking its content - formatting  
destroys all stored data.  
It is a good idea to periodically back up the internal hard disk drive or  
other main storage device to external media. General storage media is  
not durable or stable over long periods of time and under certain  
conditions may result in data loss.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-2  
 
Before you install a device or application, save any data in memory to  
the hard disk drive or other storage media. Failure to do so may result  
in the loss of data.  
Connecting the AC adaptor  
Attach the AC adaptor when you need to charge the battery or you want to  
operate from AC power. It is also the fastest way to get started, because  
the battery pack will need to be charged before you can operate from  
battery power.  
The AC adaptor can automatically adjust to any voltage ranging from 100 to  
240 volts and to a frequency of either 50 or 60 hertz, enabling you to use  
this computer in almost all country/region. The adaptor converts AC power  
to DC power and reduces the voltage supplied to this computer.  
Always use the TOSHIBA AC adaptor that was included with your  
computer, or use AC adaptors specified by TOSHIBA to avoid any risk  
of fire or other damage to the computer. Use of an incompatible AC  
adaptor could cause fire or damage to the computer possibly resulting  
in serious injury. TOSHIBA assumes no liability for any damage caused  
by use of an incompatible adaptor.  
Never plug the AC adaptor into a power source that does not  
correspond to both the voltage and the frequency specified on the  
regulatory label of the unit. Failure to do so could result in a fire or  
electric shock, possibly resulting in serious injury.  
Always use or purchase power cables that comply with the legal voltage  
and frequency specifications and requirements in the country of use.  
Failure to do so could result in a fire or electric shock, possibly resulting  
in serious injury.  
The supplied power cord conforms to safety rules and regulations in the  
region the product is bought and should not be used outside this region.  
For use in other regions, please buy power cords that conform to safety  
rules and regulations in the particular region.  
Do not use a 3-pin to 2-pin conversion plug.  
When you connect the AC adaptor to the computer, always follow the  
steps in the exact order as described in the User’s Manual. Connecting  
the power cable to a live electrical outlet should be the last step  
otherwise the adaptor DC output plug could hold an electrical charge  
and cause an electrical shock or minor bodily injury when touched. As a  
general safety precaution, avoid touching any metal parts.  
Never place your computer or AC adaptor on a wooden surface,  
furniture, or any other surface that could be marred by exposure to heat  
since the computer base and AC adaptor's surface increase in  
temperature during normal use.  
Always place your computer or AC adaptor on a flat and hard surface  
that is resistant to heat damage.  
Refer to the enclosed Instruction Manual for Safety and Comfort for  
detailed precautions and handling instructions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-3  
 
1. Connect the power cord to the AC adaptor.  
Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug)  
Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug)  
Either a 2-pin or 3-pin adaptor/cord will be included with the computer  
depending on the model.  
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the  
left of the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-4  
Figure 1-3 Connecting the DC output plug to the computer (Satellite  
L770/L775/L770D/L775D/Satellite Pro L770/L775/L770D/L775D)  
1
2
1. DC IN 19V jack  
2. DC output plug  
3. Plug the power cord into a live wall outlet - the Battery and DC IN  
indicators or DC IN/Battery indicator on the front of the computer  
should glow.  
Opening the display  
The display panel can be opened to a wide range of angles for optimal  
viewing.  
While holding down the palm rest with one hand so that the main body of  
the computer is not raised, slowly lift the display panel - this will allow the  
angle of the display panel to be adjusted to provide optimum clarity.  
Figure 1-4 Opening the display panel (Satellite L770/L775/L770D/L775D/Satellite  
Pro L770/L775/L770D/L775D)  
1
1. Display panel  
Use reasonable care when opening and closing the display panel. Opening  
it vigorously or slamming it shut could damage the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-5  
 
Be careful not to open the display panel too far as this could put stress  
on the display panel’s hinges and cause damage.  
Do not press or push on the display panel.  
Do not lift the computer by the display panel.  
Do not close the display panel with pens or any other objects left in  
between the display panel and the keyboard.  
When opening or closing the display panel, place one hand on the palm  
rest to hold the computer in place and use the other hand to slowly  
open or close the display panel (Do not use excessive force when  
opening or closing the display panel).  
Turning on the power  
This section describes how to turn on the power - the Power indicator will  
then indicate the status. Please refer to the Monitoring of power condition  
section in Chapter 5, Power and Power-Up Modes for more information.  
After you turn on the power for the first time, do not turn it off until you  
have set up the operating system.  
Volume cannot be adjusted during Windows Setup.  
1. Open the display panel.  
2. Press and hold the computer's power button for two or three seconds.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-6  
 
Figure 1-5 Turning on the power (Satellite L770/L775/L770D/L775D/Satellite Pro  
L770/L775/L770D/L775D)  
1
1. Power button  
Starting up for the first time  
The Windows 7 Startup Screen will be the first screen displayed when you  
turn on the power. Follow the on-screen instructions on each screen in  
order to properly install the operating system.  
When it is displayed, be sure to read the Software License Terms  
carefully.  
Turning off the power  
The power can be turned off in one of three modes, either Shut Down  
Mode, Hibernation Mode or Sleep Mode.  
Shut Down Mode  
When you turn off the power in Shut Down Mode no data will be saved and  
the computer will boot to the operating system's main screen the next time  
it is turned on.  
1. If you have entered data, either save it to the hard disk drive or to other  
storage media.  
2. Make sure all disk/disc activity has stopped before removing the  
CD/DVD/BD.  
Make sure the Hard Disk Drive/Optical Disc Drive indicator is off. If  
you turn off the power while a disk (disc) is being accessed, you may  
lose data or damage the disk.  
Never turn off the power while an application is running. Doing so could  
cause loss of data.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-7  
     
Never turn off the power, disconnect an external storage device or  
remove storage media during data read/write. Doing so can cause data  
loss.  
3. Click Start.  
4. Click the Shut down button (  
).  
5. Turn off any peripheral devices connected to your computer.  
Do not turn the computer or peripheral devices back on immediately - wait  
a short period to avoid any potential damage.  
Sleep Mode  
If you have to interrupt your work, you are able to turn off the power without  
exiting from your software by placing the computer into Sleep Mode. In this  
mode data is maintained in the computer's main memory so that when you  
turn on the power again, you can continue working right where you left off.  
When you have to turn off your computer aboard an aircraft or in places  
where electronic devices are regulated or controlled, always completely  
shut down the computer. This includes turning off any wireless  
communication functionalities, and cancelling settings that reactivate the  
computer automatically, such as a timer recording function. Failure to  
completely shut down the computer in this way could allow the operating  
system to reactivate and run pre-programmed tasks or preserve unsaved  
data, which could interfere with aviation or other systems, possibly causing  
serious injury.  
Before entering Sleep Mode, be sure to save your data.  
Do not install or remove a memory module while the computer is in  
Sleep Mode. The computer or the memory module could be damaged.  
Do not remove the battery pack while the computer is in Sleep Mode  
(unless the computer is connected to an AC power source). Data in  
memory could be lost.  
When the AC adaptor is connected, the computer will go into Sleep  
Mode according to the settings in the Power Options (to access it, Start  
-> Control Panel -> System and Security -> Power Options).  
To restore the operation of the computer from Sleep Mode, press and  
hold the power button or any key on the keyboard for a short amount of  
time. Please note that keyboard keys can only be used if the Wake-up  
on Keyboard option is enabled within the HW Setup utility.  
If the computer enters Sleep Mode while a network application is active,  
the application might not be restored when the computer is next turned  
on and the system returns from Sleep Mode.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-8  
 
To prevent the computer from automatically entering Sleep Mode,  
disable Sleep Mode within the Power Options (to access it, Start ->  
Control Panel -> System and Security -> Power Options).  
To use the Hybrid Sleep function, configure it in the Power Options.  
Benefits of Sleep Mode  
The Sleep Mode feature provides the following benefits:  
Restores the previous working environment more rapidly than does the  
Hibernation Mode feature.  
Saves power by shutting down the system when the computer receives  
no input or hardware access for the time period set by the System  
Sleep Mode feature.  
Allows the use of the panel power off feature.  
Executing Sleep Mode  
You can also enable Sleep Mode by pressing FN + F3 - please refer to the  
Hot key functions section in Chapter 3, Operating Basics, for further details.  
You can enter Sleep Mode in one of three ways:  
Click Start, point to the arrow icon (  
) and then select  
Sleep from the menu.  
Close the display panel. Please note that this feature must be enabled  
within the Power Options (to access it, click Start -> Control Panel ->  
System and Security -> Power Options).  
Press the power button. Please note that this feature must be enabled  
within the Power Options (to access it, click Start -> Control Panel ->  
System and Security -> Power Options).  
When you turn the power back on, you can continue where you left when  
you shut down the computer.  
When the computer is in Sleep Mode, the power indicator will blink  
amber.  
If you are operating the computer on battery power, you can lengthen  
the overall operating time by turning it off into Hibernation Mode - Sleep  
Mode will consume more power while the computer is off.  
Sleep Mode limitations  
Sleep Mode will not function under the following conditions:  
Power is turned back on immediately after shutting down.  
Memory circuits are exposed to static electricity or electrical noise.  
Hibernation Mode  
The Hibernation Mode feature saves the contents of memory to the hard  
disk drive when the computer is turned off so that, the next time it is turned  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-9  
 
on, the previous state is restored. Please note that the Hibernation Mode  
feature does not save the status of any peripheral devices connected to the  
computer.  
Save your data. While entering Hibernation Mode, the computer saves  
the contents of memory to the hard disk drive. However, for safety sake,  
it is best to save your data manually.  
Data will be lost if you remove the battery or disconnect the AC adaptor  
before the save is completed. Wait for the Hard Disk Drive/Optical  
Disc Drive indicator to go out.  
Do not install or remove a memory module while the computer is in  
Hibernation Mode. Data will be lost.  
Benefits of Hibernation Mode  
The Hibernation Mode feature provides the following benefits:  
Saves data to the hard disk drive when the computer automatically  
shuts down because of a low battery condition.  
You can return to your previous working environment immediately when  
you turn on the computer.  
Saves power by shutting down the system when the computer receives  
no input or hardware access for the time period set by the System  
Hibernate feature.  
Allows the use of the panel power off feature.  
Starting Hibernation Mode  
You can also enable Hibernation Mode by pressing FN + F4 - please refer  
to the Hot key functions section in Chapter 3, Operating Basics, for further  
details.  
To enter Hibernation Mode, follow the steps below.  
1. Click Start.  
2. Point to the arrow icon (  
the menu.  
) and then select Hibernate from  
Automatic Hibernation Mode  
The computer can be configured to enter Hibernation Mode automatically  
when you press the power button or close the lid. In order to define these  
settings, you can follow the steps as described below:  
1. Click Start and click the Control Panel.  
2. Click System and Security and click Power Options.  
3. Click Choose what the power buttons do or Choose what closing  
the lid does.  
4. Enable the desired Hibernation Mode settings for When I press the  
power button and When I close the lid.  
5. Click the Save changes button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-10  
Data save in Hibernation Mode  
When you turn off the power in Hibernation Mode, the computer will take a  
moment to save the current data in memory to the hard disk drive. During  
this time, the Hard Disk Drive/Memory media slot indicator will glow.  
After you turn off the computer, and the content of memory has been saved  
to the hard disk drive, turn off the power to any peripheral devices.  
Do not turn the computer or devices back on immediately. Wait a moment  
to let all capacitors fully discharge.  
Restarting the computer  
Certain conditions require that you reset the computer, for example if:  
You change certain computer settings.  
An error occurs and the computer does not respond to your keyboard  
commands.  
If you need to restart the computer, there are three ways this can be  
achieved:  
Click Start, point to the arrow icon (  
) and then select  
Restart from the menu.  
Press CTRL, ALT and DEL simultaneously (once) to display the menu  
window, then select Restart from the Shut down options.  
Press the power button and hold it down for five seconds. Once the  
computer has turned itself off, wait between ten and fifteen seconds  
before turning the power on again by pressing the power button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-11  
 
Chapter 2  
T
2
r
e
t
p
a
h
C
he Grand Tour  
This chapter identifies the various components of the computer - it is  
recommended that you become familiar with each before you operate the  
computer.  
Legal Footnote (Non-applicable Icons)  
For more information regarding Non-applicable Icons, please refer to the  
Legal Footnotes section in Appendix C.  
Please handle your computer carefully to avoid scratching or damaging the  
surface.  
The Grand Tour for Satellite  
C670/C675/C670D/C675D/Satellite Pro C670/C675/C670D  
Front with the display closed  
The following figure shows the computer’s front with its display panel in the  
closed position.  
Figure 2-1 Front of the computer with display panel closed  
1
2
1. DC IN/Battery indicator  
2. Power indicator  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-1  
   
DC IN/Battery  
indicator  
The DC IN/Battery indicator shows the status of  
the battery’s charge - green indicates the battery is  
fully charged while power is being correctly  
supplied from the AC power adaptor. Please refer  
to Chapter 5, Power and Power-Up Modes for  
more information on this feature.  
Power indicator  
The Power indicator normally glows green when  
the computer is turned on. However, if you turn the  
computer off into Sleep Mode, this indicator will  
blink green - approximately two seconds on, two  
seconds off - both while the system is shutting  
down and while it remains turned off.  
Left side  
The following figure shows the computer’s left side.  
Figure 2-2 The left side of the computer  
1
2
3
4
5
6
7
8
9
1. DC IN 19V jack  
2. Cooling vents  
6. Memory media slot  
7. Universal Serial Bus (USB 2.0) port  
8. Microphone jack  
3. External RGB monitor port  
4. LAN jack  
9. Headphone jack  
5. Universal Serial Bus (USB 2.0) port  
Product appearance depends on the model you purchased.  
DC IN 19V jack  
The AC adaptor connects to this jack in order to  
power the computer and charge its internal  
batteries. Please note that you should only use the  
model of AC adaptor supplied with the computer at  
the time of purchase - using the wrong AC adaptor  
can cause damage to the computer.  
Cooling vents  
The cooling vents help the processor avoid  
overheating.  
Do not block the cooling vents. Keep foreign metal objects, such as screws,  
staples and paper clips, out of the cooling vents. Foreign metal objects can  
create a short circuit, which can cause damage and fire, possibly resulting  
in serious injury.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-2  
     
External RGB  
monitor port  
This port provides 15-pin, analog VGA port.  
Please refer to Appendix A for information on  
external RGB monitor port pin assignment.  
This port allows you to connect an external RGB  
monitor to the computer.  
LAN jack  
This jack lets you connect to a LAN. The adaptor  
has built-in support for Ethernet LAN (10 megabits  
per second, 10BASE-T) or Fast Ethernet LAN (100  
megabits per second, 100BASE-TX). Some  
models are equipped with a Gigabit Ethernet LAN  
(1000 megabits per second, 1000BASE-T). Refer  
to chapter 3, Operating Basics, for details.  
Do not connect any cable other than a LAN cable to the LAN jack. It  
could cause damage or malfunction.  
Do not connect the LAN cable to a power supply. It could cause  
damage or malfunction.  
Universal Serial Bus Two Universal Serial Bus ports, which comply to  
(USB 2.0) ports  
the USB 2.0 standard, are provided on the left side  
of the computer.  
Memory media slot  
This slot lets you insert an SD™/SDHC™/SDXC™  
memory card, miniSD™/microSD™ Card and  
MultiMediaCard™. Refer to the Optional devices  
section in Chapter 3, Operating Basics for more  
information.  
Microphone jack  
Headphone jack  
A 3.5 mm mini microphone jack enables  
connection of a monaural microphone.  
A 3.5 mm mini headphone jack enables  
connection of a stereo headphone.  
Right side  
The following figure shows the computer’s right side.  
Figure 2-3 The right side of the computer  
1
2
1. Optical disc drive  
2. Security lock slot  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-3  
 
Optical disc drive  
The computer is configured with a DVD Super  
Multi, BD-Combo or BD-Writer drive.  
2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.  
Security lock slot  
A security cable can be attached to this slot and  
then connected to a desk or other large object in  
order to deter theft of the computer.  
Please note that it is not possible to confirm the operation of all functions of  
all USB devices that are available. In view of this it may be noted that some  
functions associated with a specific device might not operate properly.  
Keep foreign metal objects, such as screws, staples and paper clips, out of  
the Memory media slot and USB ports. Foreign metal objects can create a  
short circuit, which can cause damage and fire, possibly resulting in serious  
injury.  
Back  
The following figure shows the computer’s back.  
Figure 2-4 The back of the computer  
1
1. Battery pack  
Battery pack  
The rechargeable lithium-ion battery pack provides  
power to the computer when the AC adaptor is not  
connected. For more detailed information on the  
use and operation of the battery pack please refer  
to Chapter 5, Power and Power-Up Modes.  
Legal Footnote (Battery Life)  
For more information regarding Battery Life, please refer to the Legal  
Footnotes section in Appendix C.  
User’s Manual  
2-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Underside  
The following figure shows the underside of the computer. You should  
ensure that the display is closed before the computer is turned over to  
avoid causing any damage.  
Figure 2-5 The underside of the computer  
1
2
3
4
3. Memory module slot  
4. Cooling vents  
1. Battery lock  
2. Battery release latch  
Product appearance depends on the model you purchased.  
Battery lock  
Slide the battery lock to release the battery pack  
ready for removal.  
Battery release latch Slide and hold this latch into its "Unlock" position in  
order to release the battery pack for removal. For  
more detailed information on removing the battery  
pack please refer to Chapter 5, Power and Power-  
Up Modes.  
Memory module slot The memory module slot allows for the installation,  
replacement and removal of additional memory  
module.  
1 GB, 2 GB or 4 GB memory modules can be  
installed in the computer's two memory slots for a  
maximum of 8 GB system memory. The actual  
amount of useable system memory will be less  
than the installed memory modules.  
Refer to the Additional memory module section in  
Chapter 3, Operating Basics.  
Cooling vents  
The cooling vents help the processor avoid  
overheating.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-5  
 
Do not block the cooling vents. Keep foreign metal objects, such as screws,  
staples and paper clips, out of the cooling vents. Foreign metal objects can  
create a short circuit, which can cause damage and fire, possibly resulting  
in serious injury.  
Carefully clean the dust on the cooling vents’ surface using a soft cloth.  
Front with the display open  
This section shows the computer with the display panel open. In order to  
open the display, lift the display panel up and position it at a comfortable  
viewing angle for you.  
Figure 2-6 The front of the computer with the display panel open  
2
4
5
1
3
11  
6
8
7
11  
9
6
10  
1. Display screen  
2. Web Camera LED*  
3. Web Camera*  
4. Microphone*  
7. Power button  
8. Keyboard  
9. Touch Pad  
10. Touch Pad control buttons  
5. Bluetooth antenna and Wireless LAN 11. Display hinges  
antennas (not shown)*  
6. Stereo speakers  
* Provided with some models.  
Product appearance depends on the model you purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-6  
Display screen  
43.9 cm (17.3”) LCD screen, 16 million colors,  
configured with the following resolution:  
HD+, 1600 horizontal x 900 vertical pixels  
Please be aware that, when the computer is  
operating on the AC adaptor, the image displayed  
on the internal screen will be somewhat brighter  
than when it operates on battery power. This  
difference in brightness levels is intended to save  
power when operating on batteries.  
Legal Footnote (LCD)  
For more information regarding LCD, please refer to the Legal Footnotes  
section in Appendix C.  
Web Camera LED  
Web Camera  
The Web Camera LED glows when the Web  
Camera is operating.  
Web Camera is a device that allows you to record  
video or take photographs with your computer. You  
can use it for video chatting or video conferences  
using a communication tool such as Windows  
Live Messenger. TOSHIBA Web Camera  
Application will help you to add various video  
effects to your video or photograph.  
Enables the transmission of video and use of video  
chat via the internet using specialized applications.  
Some models are equipped with a Web Camera.  
Please refer to the Web Camera Application  
Online Help for details.  
Microphone  
A built-in microphone allows you to import and  
record sounds for your application - please refer to  
the Sound System section in Chapter 3, Operating  
Basics for more information.  
Do not point the web camera directly at the sun.  
Do not touch or press strongly on the web camera lens. Doing so may  
reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other  
soft cloth to clean the lens if it becomes dirty.  
When recording in dimly lit environments, select "Night Mode" which  
allows for brighter images with less noise.  
Wireless LAN  
antennas  
Some computers in this series are equipped with  
the Wireless LAN antennas.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-7  
   
Legal Footnote (Wireless LAN)  
For more information regarding Wireless LAN, please refer to the Legal  
Footnotes section in Appendix C.  
Bluetooth antenna  
Stereo speakers  
Some computers in this series are equipped with  
the bluetooth antenna.  
The speakers emit sound generated by your  
software as well as audio alarms, such as low  
battery condition, generated by the system.  
Power button  
Keyboard  
Press this button to turn the computer's power on  
and off.  
The internal keyboard provides the dedicated  
numeric keys, dedicated cursor control overlay  
keys,  
and  
Keys. Refer to the The Keyboard  
section in Chapter 3, Operating Basics, for details.  
Touch Pad  
The Touch Pad located in the palm rest is used to  
control the movement of the on-screen pointer. For  
more information, please refer to the Using the  
Touch Pad in Chapter 3, Operating Basics.  
Touch Pad control  
buttons  
The control buttons located below the Touch Pad  
allow you to select menu items or manipulate text  
and graphics as designated by the on-screen  
pointer.  
Display hinges  
The display hinges allow the display panel to be  
positioned at a variety of easy-to-view angles.  
The Grand Tour for Satellite L770/L775/L770D/L775D/Satellite  
Pro L770/L775/L770D/L775D  
Front with the display closed  
The following figure shows the computer’s front with its display panel in the  
closed position.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-8  
     
Figure 2-7 Front of the computer with display panel closed  
1
2
3
4
5
6
1. DC IN indicator  
2. Power indicator  
3. Battery indicator  
4. Hard Disk Drive/Optical Disc Drive indicator  
5. Memory media slot indicator  
6. Wireless communication indicator  
DC IN indicator  
The DC IN indicator normally glows white when  
power is being correctly supplied from the AC  
power adaptor.  
Power indicator  
The Power indicator normally glows white when  
the computer is turned on. However, if you turn the  
computer off into Sleep Mode, this indicator will  
blink amber - approximately two seconds on, two  
seconds off - both while the system is shutting  
down and while it remains turned off.  
Battery indicator  
The Battery indicator shows the condition of the  
battery's charge - white indicates the battery is  
fully charged, amber indicates the battery is  
charging, and blinking amber indicates a low  
battery condition. Please refer to Chapter 5, Power  
and Power-Up Modes for more information on this  
feature.  
Hard Disk  
Drive/Optical Disc  
Drive indicator  
The Hard Disk Drive/Optical Disc Drive  
indicator blinks white whenever the computer is  
accessing the built-in hard disk drive or optical disc  
drive.  
Memory media slot  
indicator  
The Memory media slot indicator blinks white  
when the computer is accessing the memory  
media slot.  
Wireless  
communication  
indicator  
The Wireless communication indicator glows  
amber when the Wireless functions are turned on.  
Some models are equipped with Wireless  
functions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-9  
   
Left side  
The following figure shows the computer’s left side.  
Figure 2-8 The left side of the computer  
1
2
3
4
5
6
7
1. DC IN 19V jack  
5. Universal Serial Bus (USB 2.0 or USB  
3.0) port*  
2. Cooling vents  
6. HDMI out port*  
3. External RGB monitor port  
7. Memory media slot  
4. LAN jack  
* Provided with some models.  
Product appearance depends on the model you purchased.  
DC IN 19V jack  
The AC adaptor connects to this jack in order to  
power the computer and charge its internal  
batteries. Please note that you should only use the  
model of AC adaptor supplied with the computer at  
the time of purchase - using the wrong AC adaptor  
can cause damage to the computer.  
Cooling vents  
The cooling vents help the processor avoid  
overheating.  
Do not block the cooling vents. Keep foreign metal objects, such as screws,  
staples and paper clips, out of the cooling vents. Foreign metal objects can  
create a short circuit, which can cause damage and fire, possibly resulting  
in serious injury.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-10  
   
External RGB  
monitor port  
This port provides 15-pin, analog VGA port.  
Please refer to Appendix A for information on  
external RGB monitor port pin assignment.  
This port allows you to connect an external RGB  
monitor to the computer.  
Universal Serial Bus One Universal Serial Bus port, which complies to  
(USB 2.0 or 3.0) port the USB 2.0 or 3.0 standard, is provided on the left  
side of the computer. The port with the icon has  
Sleep and Charge function.  
The USB port type may vary depending on the  
model you purchased. The Port with blue color is  
USB 3.0 port.  
The USB 2.0 port is compliant with USB 2.0  
standard and not compatible with USB 3.0  
devices.  
The USB 3.0 port is compliant with USB 3.0  
standard and backward compatible with USB 2.0  
devices.  
HDMI out port  
HDMI out port can connect with Type A connector  
HDMI cable.  
Some models are equipped with an HDMI out port.  
Memory media slot  
This slot lets you insert an SD™/SDHC™/SDXC™  
memory card, miniSD™/microSD™ Card, Memory  
Stick™, Memory Stick™ PRO™ and  
MultiMediaCard™. Refer to the Optional devices  
section in Chapter 3, Operating Basics for more  
information.  
Right side  
The following figure shows the computer’s right side.  
Figure 2-9 The right side of the computer  
4
3
5
1
2
1. Headphone jack  
2. Microphone jack  
4. Optical disc drive  
5. Security lock slot  
3. Universal Serial Bus (USB 2.0) ports  
Product appearance depends on the model you purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-11  
   
Headphone jack  
Microphone jack  
A 3.5 mm mini headphone jack enables  
connection of stereo headphones.  
A 3.5 mm mini microphone jack enables  
connection of a three-conductor mini jack for  
monaural microphone input.  
The integrated sound system provides support for the computer's internal  
speakers and microphone, as well as allowing an external microphone and  
headphones to be connected via the appropriate jacks.  
Universal Serial Bus Two Universal Serial Bus ports, which comply to  
(USB 2.0) ports  
the USB 2.0 standard, are provided on the right  
hand side of the computer  
Optical disc drive  
The computer may be configured with a DVD  
Super Multi, BD-Combo or BD-Writer drive.  
2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.  
Security lock slot  
A security cable can be attached to this slot and  
then connected to a desk or other large object in  
order to deter theft of the computer.  
Please note that it is not possible to confirm the operation of all functions of  
all USB devices that are available. In view of this it may be noted that some  
functions associated with a specific device might not operate properly.  
Keep foreign metal objects, such as screws, staples and paper clips, out of  
the Memory media slot and USB port. Foreign metal objects can create a  
short circuit, which can cause damage and fire, possibly resulting in serious  
injury.  
Back  
The following figure shows the computer’s back.  
User’s Manual  
2-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 2-10 The back of the computer  
1
1. Battery pack  
Battery pack  
The rechargeable lithium-ion battery pack provides  
power to the computer when the AC adaptor is not  
connected. For more detailed information on the  
use and operation of the battery pack please refer  
to Chapter 5, Power and Power-Up Modes.  
Legal Footnote (Battery Life)  
For more information regarding Battery Life, please refer to the Legal  
Footnotes section in Appendix C.  
Underside  
The following figure shows the underside of the computer. You should  
ensure that the display is closed before the computer is turned over to  
avoid causing any damage.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-13  
 
Figure 2-11 The underside of the computer  
1
2
3
4
3. Memory module slot  
4. Cooling vents  
1. Battery lock  
2. Battery release latch  
Product appearance depends on the model you purchased.  
Battery lock  
Slide the battery lock to release the battery pack  
ready for removal.  
Battery release latch Slide and hold this latch into its "Unlock" position in  
order to release the battery pack for removal. For  
more detailed information on removing the battery  
pack please refer to Chapter 5, Power and Power-  
Up Modes.  
Memory module slot The memory module slot allows for the installation,  
replacement and removal of additional memory  
module.  
1 GB, 2 GB or 4 GB memory modules can be  
installed in the computer's two memory slots for a  
maximum of 8 GB system memory. The actual  
amount of useable system memory will be less  
than the installed memory modules.  
Refer to the Additional memory module section in  
Chapter 3, Operating Basics.  
Cooling vents  
The cooling vents help the processor avoid  
overheating.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-14  
 
Do not block the cooling vents. Keep foreign metal objects, such as screws,  
staples and paper clips, out of the cooling vents. Foreign metal objects can  
create a short circuit, which can cause damage and fire, possibly resulting  
in serious injury.  
Carefully clean the dust on the cooling vents’ surface using a soft cloth.  
Front with the display open  
This section shows the computer with the display panel open. In order to  
open the display, lift the display panel up and position it at a comfortable  
viewing angle for you.  
Figure 2-12 The front of the computer with the display panel open  
5
3
2
4
1
11  
6
8
7
11  
12  
9
6
10  
1. Display screen  
2. Web Camera*  
3. Web Camera LED*  
4. Microphone*  
7. Power button  
8. Keyboard  
9. Touch Pad  
10. Touch Pad control buttons  
5. Bluetooth antenna and Wireless LAN 11. Display hinges  
antennas (not shown)*  
6. Stereo speakers  
12. Touch Pad ON/OFF button  
* Provided with some models.  
Product appearance depends on the model you purchased.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-15  
Display screen  
43.9 cm (17.3”) LCD screen, 16 million colors,  
configured with the following resolution:  
HD+, 1600 horizontal x 900 vertical pixels  
Please be aware that, when the computer is  
operating on the AC adaptor, the image displayed  
on the internal screen will be somewhat brighter  
than when it operates on battery power. This  
difference in brightness levels is intended to save  
power when operating on batteries.  
Legal Footnote (LCD)  
For more information regarding LCD, please refer to the Legal Footnotes  
section in Appendix C.  
Web Camera LED  
Web Camera  
The Web Camera LED glows when the Web  
Camera is operating.  
Web Camera is a device that allows you to record  
video or take photographs with your computer. You  
can use it for video chatting or video conferences  
using a communication tool such as Windows  
Live Messenger. TOSHIBA Web Camera  
Application will help you to add various video  
effects to your video or photograph.  
Enables the transmission of video and use of video  
chat via the internet using specialized applications.  
Some models are equipped with a Web Camera.  
Please refer to the Web Camera Application  
Online Help for details.  
Microphone  
A built-in microphone allows you to import and  
record sounds for your application - please refer to  
the Sound System section in Chapter 3, Operating  
Basics for more information.  
Do not point the web camera directly at the sun.  
Do not touch or press strongly on the web camera lens. Doing so may  
reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other  
soft cloth to clean the lens if it becomes dirty.  
When recording in dimly lit environments, select "Night Mode" which  
allows for brighter images with less noise.  
Wireless LAN  
antennas  
Some computers in this series are equipped with  
the Wireless LAN antennas.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-16  
   
Legal Footnote (Wireless LAN)  
For more information regarding Wireless LAN, please refer to the Legal  
Footnotes section in Appendix C.  
Bluetooth antenna  
Stereo speakers  
Some computers in this series are equipped with  
the bluetooth antenna.  
The speakers emit sound generated by your  
software as well as audio alarms, such as low  
battery condition, generated by the system.  
Power button  
Keyboard  
Press this button to turn the computer's power on  
and off.  
The internal keyboard provides the dedicated  
numeric keys, dedicated cursor control overlay  
keys,  
and  
Keys. Refer to the The Keyboard  
section in Chapter 3, Operating Basics, for details.  
Touch Pad  
The Touch Pad located in the palm rest is used to  
control the movement of the on-screen pointer. For  
more information, please refer to the Using the  
Touch Pad in Chapter 3, Operating Basics.  
Touch Pad control  
buttons  
The control buttons located below the Touch Pad  
allow you to select menu items or manipulate text  
and graphics as designated by the on-screen  
pointer.  
Display hinges  
The display hinges allow the display panel to be  
positioned at a variety of easy-to-view angles.  
Touch Pad ON/OFF Press this button to enable or disable the Touch  
button Pad function.  
Internal Hardware Components  
This section describes the internal hardware components of your computer.  
The actual specifications may vary depending on the model you  
purchased.  
CPU  
The processor type varies depending on model.  
To check which type of processor is included in  
your model, open the TOSHIBA PC Diagnostic  
Tool Utility by clicking Start -> All Programs ->  
TOSHIBA -> Utilities -> PC Diagnostic Tool.  
Legal Footnote (CPU)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-17  
       
For more information regarding CPU, please refer to the Legal Footnotes  
section in Appendix C.  
Hard Disk Drive or  
Solid State Drive  
The size of the hard disk drive varies depending  
on the model.  
To check which type of HDD/SSD is included in  
your model, open the TOSHIBA PC Diagnostic  
Tool Utility by clicking Start -> All Programs ->  
TOSHIBA -> Utilities -> PC Diagnostic Tool.  
Please note that part of the hard disk's overall  
capacity is reserved as administration space.  
In this manual, the word "HDD" or "Hard disk drive" also refers to the  
SSD unless otherwise stated.  
SSD is a large-capacity storage media which uses Solid-State Memory  
in place of a magnetic disk of the hard disk.  
Under certain unusual conditions of prolonged non-use and/or exposure to  
high temperatures, the SSD may be vulnerable to data retention errors.  
Legal Footnote (Hard Disk Drive (HDD) Capacity)  
For more information regarding Hard Disk Drive (HDD) Capacity, please  
refer to the Legal Footnotes section in Appendix C.  
RTC battery  
Video RAM  
The internal RTC battery backs up the Real Time  
Clock (RTC) and calendar.  
The memory in a computer's graphics adaptor,  
used to store the image displayed on a bitmap  
display.  
The amount of Video RAM available is dependent  
on the computer's system memory.  
Start -> Control Panel -> Appearance and  
Personalization -> Display -> Adjust resolution.  
The amount of Video RAM can be verified by  
clicking the Advanced settings button in the  
Screen Resolution window.  
Legal Footnote (Memory (Main System))  
For more information regarding Memory (Main System), please refer to the  
Legal Footnotes section in Appendix C.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-18  
     
Display controller  
The display controller interprets software  
commands into hardware commands that turn  
particular parts on the screen on or off.  
The display controller also controls the video mode  
and uses industry standard rules to govern the  
screen resolution and the maximum number of  
colors that can be displayed at any one time.  
Therefore, software written for a given video mode  
will run on any computer that supports that mode.  
Due to the display panel's increased resolution, lines may appear broken in  
when displaying images in full-screen text mode.  
Graphics controller The graphics controller maximizes display  
performance.  
Legal Footnote (Graphics Processing Unit ("GPU"))  
For more information regarding Graphics Processing Unit ("GPU"), please  
refer to the Legal Footnotes section in Appendix C.  
Intel® Display Power Saving Technology  
Intel GPU model may include the Display Power Saving Technology feature  
that can save the computer's power consumption by optimizing picture  
contrast on the internal LCD.  
This feature can be used if the computer is:  
running under battery mode  
using the internal LCD display only  
The Display Power Saving Technology feature can be enabled in the Intel®  
Graphics and Media Control Panel.  
You can access this control panel in one of the following ways:  
Click Start -> Control Panel. Select Large icons or Small icons in  
View by, and then click Intel(R) Graphics and Media.  
Right-click on the desktop and click Graphics Properties...  
In this control panel:  
1. Select Basic Mode and click OK.  
2. Click Power.  
3. Select On battery from the drop-down menu in Power Source and  
then select the Display Power Saving Technology check box.  
If you want to improve the picture quality under the conditions mentioned  
above, adjust the setting towards Maximum Quality or disable this feature.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-19  
   
AMD® Vari-Bright™  
AMD GPU model may include the AMD® Vari-Brightfeature that can save  
the computer's power consumption by optimizing picture contrast on the  
internal LCD.  
This feature can be used if the computer is:  
running under battery mode  
using the internal LCD display only  
The Vari-Bright feature can be enabled in the Catalyst Control Center.  
To access this center, go to  
Start -> All Programs -> Catalyst Control Center -> CCC  
In this control center,  
1. Select PowerPlayunder Power.  
2. Select the Enable PowerPlaycheck box, and then select the Enable  
Vari-Brightcheck box.  
If you want to improve the picture quality under the conditions mentioned  
above, adjust the setting towards Maximize Quality or disable this feature.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-20  
Chapter 3  
O
3
r
e
t
p
a
h
C
perating Basics  
This chapter describes the basic operations of your computer, highlights  
the precautions that should be taken when using it.  
Using the Touch Pad  
To use the Touch Pad, simply touch and move your fingertip across it in the  
direction you want the on-screen pointer to go.  
Figure 3-1 Touch Pad and Touch Pad control buttons (Satellite  
L770/L775/L770D/L775D/Satellite Pro L770/L775/L770D/L775D)  
2
1
3
1. Touch Pad ON/OFF button  
2. Touch Pad  
3. Touch Pad control buttons  
Pressing the Touch Pad ON/OFF button enables or disables the Touch Pad  
function. Some models are equipped with the Touch Pad ON/OFF button.  
The two buttons below the Touch Pad are used like the buttons on a  
standard mouse - press the left button to select a menu item or to  
manipulate text or graphics designated by the pointer, and press the right  
button to display a menu or other function depending on the software you  
are using.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-1  
     
The Keyboard  
The computer’s keyboard layouts are compatible with a 104/105-key  
enhanced keyboard - by pressing some keys in combination, all of the  
104/105-key enhanced keyboard functions can be performed on the  
computer.  
The number of keys available on your keyboard will depend on which  
country/region your computer is configured for, with keyboards being  
available for numerous languages.  
In use there are five different types of keys, specifically typewriter keys,  
function keys, soft keys, Hot keys and Windows special keys.  
Keyboard indicators  
The following figures show the positions of the CAPS LOCK indicator and  
the NUM LOCK indicator which show the following conditions:  
When the CAPS LOCK indicator glows, the keyboard will produce  
capitals when any letter is typed.  
When the NUM LOCK indicator glows, the ten key allows you to enter  
numbers.  
Figure 3-2 CAPS LOCK and NUM LOCK indicators (Satellite  
L770/L775/L770D/L775D/Satellite Pro L770/L775/L770D/L775D)  
2
1
1. CAPS LOCK indicator  
2. NUM LOCK indicator  
CAPS LOCK  
This indicator glows green when letter keys are  
locked into their uppercase format.  
NUM LOCK  
When the NUM LOCK indicator glows, you can  
use the number keys on the keyboard for number  
entry.  
Function keys: F1 … F9  
The function keys (not to be confused with the special FN key) are the nine  
keys at the top of your keyboard - these keys function differently from other  
keys.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-2  
       
F1 through F9 are called function keys because they execute programmed  
functions when pressed and, when used in combination with the FN key,  
those keys marked with icons also execute specific functions on the  
computer.  
Soft keys: FN key combinations  
The FN (function) is used in combination with other keys to form soft keys.  
Soft keys are key combinations that enable, disable or configure specific  
features.  
Please note that some software may disable or interfere with soft-key  
operations, and that the soft-key settings are not restored when the  
computer returns from Sleep Mode.  
This computer's keyboard is designed to provide all the features of the 104-  
key enhanced keyboard.  
Since the keyboard is smaller and has fewer keys, some of the enhanced  
keyboard functions must be simulated using two keys instead of one on the  
larger keyboard.  
The FN key can be combined with the following keys to simulate functions  
similar to those of keys on the 104/105 key enhanced keyboard which are  
not on this computer's keyboard.  
Hot key functions  
Hot key functions let you enable or disable certain features of the computer.  
The Hot key functions can be performed using either the Hot Key Cards or  
by pressing the associated Hot keys (pressing FN + a function or ESC key).  
Hot Key Cards  
The Hot Key Cards are normally hidden from view. The Cards appear when  
you press the FN key.  
To use the Hot Key Cards:  
1. Press and hold the FN key. The TOSHIBA Flash Cards appear along  
the top of the screen.  
2. Select the desired option  
The selected Card is displayed full-size with its available options below  
it. All other Cards are again hidden from view.  
3. Click the desired option.  
To use a Hot Key Card using a hot key:  
1. Press and hold the FN key.  
2. Press the hot key associated with the desired function. The associated  
hot key card appears at the top of the screen with its available options  
below it.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-3  
 
3. To cycle through the displayed options, hold down FN and press the hot  
key repeatedly. Release the FN key when the desired option is  
selected.  
For more information, please refer to the TOSHIBA Flash Cards Help file.  
To access this help, click Start -> All Programs -> TOSHIBA -> Utilities ->  
Flash Cards Help.  
Hot keys  
This section describes the associated functions of the hot keys.  
Mute  
Pressing FN + ESC turns the sound on and off.  
Lock  
Pressing FN + F1 enters ''Lock computer mode''. To restore your  
desktop, you need to log on again.  
Power Plan  
Pressing FN + F2 changes the power settings.  
Sleep  
Pressing FN + F3 switches the system to Sleep Mode.  
Hibernate  
Pressing FN + F4 switches the system to Hibernation Mode.  
Output  
Pressing FN + F5 changes the active display device.  
To use a simultaneous mode, you must set the resolution of the internal  
display panel to match the resolution of the external display device.  
Brightness Down  
Pressing FN + F6 decreases the computer's display panel brightness in  
individual steps.  
Brightness Up  
Pressing FN + F7 increases the computer's display panel brightness in  
individual steps.  
Wireless  
Pressing FN + F8 switches the active wireless devices.  
If no wireless communication device is installed, no dialog box will appear.  
Touch Pad  
Pressing FN + F9 enables or disables the Touch Pad function.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-4  
                                       
Zoom  
Pressing FN + Space changes the display resolution.  
Reduce  
Pressing FN + 1 reduces the icon size on the desktop or the font sizes  
within one of the supported application windows.  
Enlarge  
Pressing FN + 2 enlarges the icon size on the desktop or the font sizes  
within one of the supported application windows.  
Volume down  
Pressing FN + 3 decreases the volume in increment.  
Volume up  
Pressing FN + 4 increases the volume in increment.  
FN Sticky key  
You can use the TOSHIBA Accessibility Utility to make the FN key sticky,  
that is, you can press it once, release it, and then press an "F Number" key.  
To start the TOSHIBA Accessibility utility, click Start -> All Programs ->  
TOSHIBA -> Utilities -> Accessibility.  
Windows special keys  
The keyboard provides two keys that have special functions in Windows,  
the Windows Start Button key activates the Start menu while the  
application key has the same function as the secondary (right) mouse  
button.  
This key activates the Windows Start menu.  
This key has the same function as the secondary (right) mouse button.  
Generating ASCII characters  
Not all ASCII characters can be generated using normal keyboard  
operation, but you are able to generate these characters using their specific  
ASCII codes.  
1. Hold down ALT key.  
2. Using the numeric keypad, type the ASCII code of the character you  
require.  
3. Release ALT - the ASCII character will appear on the display screen.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-5  
               
Optical disc drives  
The computer may be installed with a DVD Super Multi, BD-Combo or BD-  
Writer drive. When the computer is accessing an optical disc, an indicator  
on the drive glows.  
Some models are equipped with an optical disc drive.  
Formats  
The drives support the following formats.  
DVD Super Multi drive Double Layer  
The drive supports the following formats: CD-ROM, DVD-ROM, DVD-  
Video, CD-DA, CD-Text, Photo CDTM (single/multi-session), CD-ROM  
Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-  
EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD+RW,  
DVD-RAM, DVD-R DL (Format1), DVD+R DL.  
BD-Combo drive  
In addition to the above formats, BD-Combo drive supports BD-ROM and  
BD (DL).  
BD-Writer drive  
In addition to the above formats, BD-Writer drive supports BD-R, BD-R  
(DL), BE-RE and BD-RE (DL).  
Some types and formats of DVD-R (DL) and DVD+R (DL) discs may be  
unreadable.  
Using optical disc drives  
The full-size drive provides high-performance execution of disk based  
programs. You can run either 12 cm (4.72") or 8 cm (3.15") discs without an  
adaptor.  
Use the DVD playback application to view DVD-Video discs.  
If you have an Optical disc drive, refer also to the Writing CD/DVD/BDs  
section for precautions on writing to CDs/DVD/BDs.  
To load discs, follow the steps as detailed below:  
1. When the computer’s power is on, press the eject button to open the  
disc tray slightly.  
2. Grasp the disc tray gently and pull until it is fully opened.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-6  
   
Figure 3-3 Pressing the eject button and pulling the disc tray open (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
1
2
1. Eject button  
2. Disc tray  
3. Lay the disc, label side up, in the disc tray.  
Figure 3-4 Inserting a disc (Satellite L770/L775/L770D/L775D/satellite Pro  
L770/L775/L770D/L775D)  
1
1. Laser lens  
When the disc tray is fully opened, the edge of the computer will cover the  
disc tray slightly. Therefore, you will need to turn the disc at an angle when  
you place it in the disc tray. After seating the disc, however, make sure it  
lies flat.  
Do not touch the laser lens or any portion of its surrounding casing as  
this could cause misalignment.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-7  
Prevent foreign objects from entering the drive. Check the surface of  
the disc tray, especially the area behind the front edge of the disc tray,  
to make sure there are no such objects before closing the drive.  
4. Press gently at the center of the disc until you feel it click into place. The  
disc should lie below the top of the spindle, flush with the spindle base.  
5. Push the center of the disc tray to close it. Press gently until it locks into  
place.  
If the disc is not seated properly when the disc tray is closed, the disc might  
be damaged. Also, the disc tray might not open fully when you press the  
eject button.  
Removing discs  
To remove the disc, follow the steps as detailed below:  
Do not press the eject button while the computer is accessing the media  
drive. Wait for the optical disc drive indicator to go out before you open the  
disc tray. Also, if the disc is spinning when you open the disc tray, wait for it  
to stop before you remove it.  
1. To pop the disc tray partially open, press the eject button. Gently pull  
the disc tray out until it is fully opened.  
When the disc tray pops open slightly, wait a moment to make sure the disc  
has stopped spinning before pulling the disc tray fully open.  
2. The disc extends slightly over the sides of the disc tray so you can  
grasp it. Gently lift out the disc.  
3. Push the center of the disc tray to close it. Press gently until it locks into  
place.  
How to remove disc when the disc tray will not open  
Pressing the eject button will not open the disc tray when the computer  
power is off. If the power is off, you can open the disc tray by inserting a  
slender object (about 15 mm) such as a straightened paper clip into the  
eject hole near the eject button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-8  
Figure 3-5 Manual release with the eject hole (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
Φ1.0mm  
1
1. Eject hole  
Turn off the power before you use the eject hole. If the disc is spinning  
when you open the disc tray, the disc could fly off the spindle and cause  
injury.  
Writable discs  
This section describes the types of writable discs. Check the specifications  
of your drive to see the types of discs it can write. Use TOSHIBA Disc  
Creator and Corel Digital Studio to write compact discs.  
CDs  
CD-R discs can be written only once. The recorded data cannot be  
erased or changed.  
CD-RW discs including multi speed CD-RW discs, high-speed CD-RW  
discs and ultra-speed CD-RW discs can be recorded more than once.  
DVDs  
DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only  
once. The recorded data cannot be erased or changed.  
DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than  
once.  
BDs  
BD-R and BD-R DL discs can be written only once. The recorded data  
cannot be erased or changed.  
BD-RE and BD-RE DL discs can be recorded more than once.  
Writing CD/DVD/BDs  
The TOSHIBA Disc Creator and Corel Digital Studio are provided as writing  
software with this computer.  
Corel Digital Studio can be used to write files in video format. TOSHIBA  
Disc Creator can be used to write data.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-9  
 
You can use the DVD Super Multi drive or BD-Combo drive to write data to  
either CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL,  
DVD+RW, DVD-RAM or DVD-R DL discs.  
You can use the BD-Writer drive to write data to either CD-R, CD-RW,  
DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM,  
DVD-R DL, BD-R or BD-RE discs.  
When writing information to media using an optical drive, you should  
always ensure that you connect the AC adaptor to a live power socket. It is  
possible that, if data is written while powered by the battery pack, the write  
process may sometimes fail due to low battery power - in these instances  
data loss may occur.  
Important message  
Before you write or rewrite to any of the media supported by the DVD  
Super Multi Drive or BD-Combo/BD-Writer drive, please read and follow all  
of the setup and operating instructions in this section. If you fail to do so,  
you may find that the DVD Super Multi drive or BD-Combo/BD-Writer drive  
may not function properly, and you may fail to write or rewrite information  
successfully - this may cause you to either lose data or incur other damage  
to the drive or media.  
Disclaimer  
TOSHIBA does not bear responsibility for the following:  
Damage to any disc that may be caused by writing or rewriting with this  
product.  
Any change or loss of the recorded contents of media that may be  
caused by writing or rewriting with this product, or for any business  
profit loss or business interruption that may be caused by the change or  
loss of the recorded contents.  
Damage that may be caused by using third party equipment or  
software.  
Given the technological limitations of current optical disc writing drives, you  
may experience unexpected writing or rewriting errors due to disc quality or  
problems with hardware devices. In view of this, it is good practice to make  
two or more copies of important data, in case of any undesired change or  
loss of the recorded contents.  
Before writing or rewriting  
Based on TOSHIBA's limited compatibility testing, we suggest the  
following manufacturers of disc media, however, it must be noted that  
disc quality can affect write or rewrite success rates. Please also be  
aware that in no event does TOSHIBA guarantee the operation, quality  
or performance of any disc.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-10  
CD-R:  
TAIYO YUDEN CO., Ltd.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
CD-RW: (Multi-Speed, High-Speed and Ultra-Speed)  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-R:  
DVD Specifications for Recordable Disc for General Version 2.0  
TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media)  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)  
Hitachi Maxell, Ltd. (for 8x and 16x speed media)  
DVD-R DL:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)  
DVD+R:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)  
TAIYO YUDEN CO., Ltd. (for 8x and 16x speed media)  
DVD+R DL:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x speed media)  
DVD-RW:  
DVD Specifications for Recordable Disc for Version 1.1 or version 1.2  
Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media)  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media)  
DVD+RW:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)  
DVD-RAM: (DVD Super Multi drive only)  
DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or  
Version 2.2  
Panasonic Corporation (for 3x and 5x speed media)  
Hitachi Maxell, Ltd. (for 3x and 5x speed media)  
BD-R:  
Panasonic Corporation  
BD-R DL:  
Panasonic Corporation  
BD-RE:  
Panasonic Corporation  
BD-RE DL:  
Panasonic Corporation  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-11  
Some types and formats of DVD-R DL and DVD+R DL discs may be  
unreadable.  
DISC created in DVD-R DL format4 (Layer Jump Recording) cannot be  
read.  
When writing or rewriting  
Please observe the following points while you write or rewrite data to a  
media:  
Always copy data from the hard disk drive to the optical media - do not  
use the cut-and-paste function as the original data will be lost if there is  
a write error.  
Do not perform any of the following actions:  
Change users in the Operating Systems.  
Operate the computer for any other function, including such tasks as  
using a mouse or Touch Pad, or closing/opening the display panel.  
Start a communication application such as a modem.  
Apply impact or vibration to the computer.  
Install, remove or connect external devices, including such items as  
an memory media card, USB device, external monitor or an optical  
digital device.  
Use the audio/video control button to reproduce music or voice.  
Open the optical disc drive.  
Do not use shut down, log off, Sleep Mode or Hibernation Mode  
functions while writing or rewriting.  
Make sure that the write/rewrite operation is completed before going  
into either Sleep Mode or Hibernation Mode (You can remove an optical  
media on the optical disc drive after writing is completed).  
If the media is of poor quality, or is dirty or damaged, writing or rewriting  
errors may occur.  
Set the computer on a level surface and avoid places subject to  
vibration such as airplanes, trains or cars. In addition, do not use the  
computer on an unstable surface such as a stand.  
Keep mobile phones and other wireless communication devices away  
from the computer.  
TOSHIBA Disc Creator  
Please be aware of the following limitations when you use the TOSHIBA  
Disc Creator:  
DVD Video cannot be created using TOSHIBA Disc Creator.  
DVD Audio cannot be created using TOSHIBA Disc Creator.  
You cannot use TOSHIBA Disc Creator's "Audio CD" function to record  
music to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or  
DVD+RW media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-12  
 
Do not use the "Disc Backup" function of TOSHIBA Disc Creator in  
order to copy DVD Video or DVD-ROM material that has copyright  
protection.  
DVD-RAM discs cannot be backed up using the "Disc Backup" function  
of TOSHIBA Disc Creator.  
You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R, DVD-  
R DL or DVD-RW media using the "Disc Backup" function of TOSHIBA  
Disc Creator.  
You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R,  
DVD+R DL or DVD+RW media using the "Disc Backup" function of  
TOSHIBA Disc Creator.  
You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-R DL, DVD-  
RW, DVD+R, DVD+R DL or DVD+RW to CD-R or CD-RW media using  
the "Disc Backup" function of TOSHIBA Disc Creator.  
TOSHIBA Disc Creator cannot record in packet format.  
You might not be able to use the "Disc Backup" function of TOSHIBA  
Disc Creator to back up a DVD-R, DVD-R DL, DVD-RW, DVD+R,  
DVD+R DL or DVD+RW disc that was made with other software on a  
different optical media recorder.  
If you add data to a DVD-R, DVD-R DL, DVD+R or DVD+R DL disc that  
you have already recorded to, you might not be able to read the added  
data under some circumstances. For example, it cannot be read under  
16-bit operating systems, such as Windows 98SE and Windows Me,  
while in Windows NT4 you will need Service Pack 6 or later, and in  
Windows 2000, you will need Service Pack 2. In addition to this, some  
DVD-ROM and DVD-ROM / CD-R/RW drives cannot read this added  
data regardless of the operating system.  
TOSHIBA Disc Creator does not support recording to DVD-RAM discs -  
to achieve this you should use Windows Explorer or another similar  
utility.  
When you back up a DVD disc, be sure that the source drive supports  
recording to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or  
DVD+RW media - if this is not the case then the source disc might not  
be backed up correctly.  
When you back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R  
DL or DVD+RW disc, be sure to use the same type of disc.  
You cannot partially delete any data written to a CD-RW, DVD-RW or  
DVD+RW disc.  
Data Verification  
To verify that data has been written or rewritten correctly to a data CD/DVD  
you should follow the steps below before you begin the write/rewrite  
process:  
1. Click Start -> All Programs -> TOSHIBA -> CD&DVD Applications ->  
Disc Creator to access the TOSHIBA Disc Creator utility.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-13  
2. Display the setting dialog box by one of the following two steps:  
Click the Recording settings button (  
) for writing on the main  
toolbar in the Data CD/DVD mode.  
Select Settings for Each Mode -> Data CD/DVD in the Settings  
menu.  
3. Mark the Verify Written Data check box.  
4. Select File Open or Full Compare mode.  
5. Click the OK button.  
How to learn more about TOSHIBA Disc Creator  
Please refer to the Help files for additional TOSHIBA Disc Creator  
information.  
Using Corel Digital Studio for TOSHIBA  
This feature is supported with some models.  
How to make a Labelflash DVD  
Simplified steps for making a Labelflash DVD:  
1. Insert a Labelflash disc in optical disc drive.  
Set PRINTING SIDE for underside.  
2. Click Start -> All Programs -> Corel Digital Studio for TOSHIBA ->  
Corel Digital Studio for TOSHIBA -> Create.  
3. Click Create Disc Label.  
How to make a DVD-Video or a Blu-ray Disc Movie  
Simplified steps for making a DVD-Video or a Blu-ray disc movie from  
adding video source:  
1. Click Start -> All Programs -> Corel Digital Studio for TOSHIBA ->  
Corel Digital Studio for TOSHIBA to launch Corel Digital Studio.  
2. Insert a DVD-R, DVD+R, DVD-RW, DVD+RW, BD-R or BD-RE disc in  
optical disc drive.  
3. Find a source video and drag it onto Media Tray.  
4. Click Burn -> Video Disc.  
5. Select DVD or Blu-ray in Select disc.  
6. Select DVD-Video or BDMV in Project format.  
7. Input project name and select a style.  
8. Click the Go to menu editing button.  
9. Click the Burn button.  
How to learn more about Corel Digital Studio  
Please refer to the Help and Manual files for additional Corel Digital Studio  
information.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-14  
To open the Corel Digital Studio Manual, press the F1 key when the Corel  
Digital Studio is launched.  
Important information for use  
Note the following limitations when you write Video DVD or Blu-ray disc  
movie, file convert or playback files.  
Editing digital video  
Log in with Administrator rights to use Corel Digital Studio.  
Make sure that your computer is running on AC power when using  
Corel Digital Studio.  
Operate the computer at Full Power. Do not use power-saving features.  
While you are editing DVD, you can display preview. However, if  
another application is running. The preview might not display properly.  
Corel Digital Studio cannot edit or play copy protected content.  
Do not enter Sleep or Hibernation Mode while using Corel Digital  
Studio.  
Do not operate Corel Digital Studio immediately after turning on the  
computer. Please wait until all Disc Drive activity has stopped.  
CD recorder, DVD-Audio, Video CD functions are not supported in this  
version.  
Do not run software like a screen saver because it can put a heavy load  
on the CPU.  
Do not support mp3 decode and encode.  
DVD-VR format is not supported in this version.  
Before recording the video to DVD or Blu-ray disc  
When you record DVD disc or Blu-ray disc, please use only discs  
recommended by the Drive manufacturer.  
Do not set the working drive to a slow device like a USB1.1 hard disk  
drive or it will fail to write DVD or Blu-ray disc.  
Do not perform any of the following actions:  
Operate the computer for any other function, including using a mouse  
or Touch Pad, or closing/opening the display panel.  
Bump or cause vibration to the computer.  
Use the Mode control button and Audio/Video control button to  
reproduce music or voice.  
Open the DVD/BD drive.  
Install, remove or connect external devices, including the following:  
memory media card, USB device, external display, optical digital  
devices.  
Please verify your disc after recording important data.  
Not support to output VCD and SVCD format.  
Force eject disc.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-15  
About recorded DVDs and Blu-ray discs  
Some DVD-ROM drives for personal computers or other DVD players  
may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.  
When playing your recorded DVD on your computer, please use the  
TOSHIBA VIDEO PLAYER software application.  
When playing your recorded Blu-ray Disc on your computer, please use  
the WinDVD BD for TOSHIBA software application.  
If you use an over-used rewritable disc, the full formatting might be  
locked. Please use a brand new disc.  
TOSHIBA VIDEO PLAYER  
Please be aware of the following limitations when you use the TOSHIBA  
VIDEO PLAYER:  
Notes on use  
This software can only be used on Windows 7.  
TOSHIBA VIDEO PLAYER software is supported for playback of DVD-  
Video and DVD-VR.  
Frame dropping, audio skipping or out of sync audio and video may  
occur during playback of some DVD-Video titles.  
Close all other applications when using the TOSHIBA VIDEO PLAYER.  
Do not open any other applications or carry out any other operations  
during video playback. Playback may stop or not function properly in  
some situations.  
Unfinalized DVDs created on home DVD recorders may not be playable  
on the computer.  
Use DVD-Video discs with a region code which is either "the same as  
the factory default setting" (if applicable) or "ALL".  
Do not playback video while watching or recording television programs  
using other applications. Doing so may cause DVD-Video playback or  
television program recording errors. In addition, if prescheduled  
recording starts during DVD-Video playback it may cause DVD-Video  
playback or television program recording errors. Please view DVD-  
Video during times when there is no recording prescheduled.  
The resume function cannot be used with some discs on the TOSHIBA  
VIDEO PLAYER.  
It is recommended the AC adaptor be connected when playing video.  
Power saving features may interfere with smooth playback. When  
playing DVD-Video using battery power, set the Power Options to  
"Balance".  
The screen saver is disabled during video playback using the TOSHIBA  
VIDEO PLAYER. The computer will not automatically go into  
Hibernation, Sleep, or shut-down mode.  
Do not configure the Display automatic power off function to run while  
the TOSHIBA VIDEO PLAYER is running.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-16  
 
Do not switch to Hibernation or Sleep Mode when running the  
TOSHIBA VIDEO PLAYER.  
Do not lock the computer using the Windows logo (  
) + L keys or  
the FN + F1 keys when running the TOSHIBA VIDEO PLAYER.  
The TOSHIBA VIDEO PLAYER does not have a parental control  
function.  
In order to protect copyrights, the Windows Print Screen function is  
disabled when TOSHIBA VIDEO PLAYER is running.  
(Print Screen functions are disabled even when running other  
applications besides TOSHIBA VIDEO PLAYER and when TOSHIBA  
VIDEO PLAYER is minimized.) Please close the TOSHIBA VIDEO  
PLAYER to use the Print Screen function.  
Carry out the installation/uninstallation of the TOSHIBA VIDEO  
PLAYER under a user account with administrator rights.  
Do not change Windows Users while TOSHIBA VIDEO PLAYER is  
running.  
For some DVD-Video discs, using the control window to change the  
audio track will also change the subtitle track.  
If you see the screen blinking while playing DVD with subtitle on at  
Media Player, please use TOSHIBA VIDEO PLAYER or Media Center  
to play DVD.  
Display Devices & Audio  
TOSHIBA VIDEO PLAYER will only run when "Colors" is set to "True  
Color (32 bit)". Click Start -> Control Panel -> Appearance and  
Personalization -> Display -> Adjust resolution, click "Advanced  
settings", select "Monitor" tab, set "colors" to "True color (32 bit)".  
If the DVD-Video image is not displayed on an external display or  
television, stop the TOSHIBA VIDEO PLAYER, and change the screen  
resolution. To change the screen resolution, click Start -> Control  
Panel -> Appearance and Personalization -> Display -> Adjust  
resolution. However, video cannot be output to some external displays  
and televisions due to output or playback conditions.  
When viewing DVD-Video on an external display or TV, change the  
display device before playing. DVD-Video cannot be displayed  
simultaneously (in clone mode) on both the computer's display panel  
and an external display.  
Do not change the screen resolution while running the TOSHIBA  
VIDEO PLAYER.  
Do not change the display device while running the TOSHIBA VIDEO  
PLAYER.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-17  
Starting TOSHIBA VIDEO PLAYER  
Use the following procedure to start TOSHIBA VIDEO PLAYER.  
1. Insert an DVD-Video in the optical disc drive while Windows® 7 is  
running.  
When an DVD-Video disc is set in the DVD drive (for models with DVD  
drive), if the application selection screen appears, select Play DVD  
movie, (using TOSHIBA VIDEO PLAYER) to launch the TOSHIBA  
VIDEO PLAYER.  
2. Select Start -> All Programs -> TOSHIBA VIDEO PLAYER ->  
TOSHIBA VIDEO PLAYER to start TOSHIBA VIDEO PLAYER.  
3D playback feature  
(Only some models)  
TOSHIBA VIDEO PLAYER has 3D playback function, which can playback  
3D video content, and 2D home video content (DVD or video file) in 3D  
using real-time 2Dto3D conversion.  
The 3D effect can only be shown on external 3D devices connected via  
an HDMI output. It cannot be shown on the internal display.  
The 2Dto3D conversion function uses TOSHIBA's original algorithm to  
apply a 3D effect to your own 2D videos. However, note that this  
function does not provide the same video content as a video originally  
provided in 3D, and does not create a new video in the 3D format but  
only plays 2D videos in a 3D like mode.  
The 2Dto3D conversion function is meant for the enjoyment of your own  
2D home video and other 2D contents you created, in 3D according to  
your personal preferences.  
The “TOSHIBA VIDEO PLAYER” is set by default in the 2D format. By  
pressing the 2Dto3D conversion function button, you decide to activate  
the 2Dto3D conversion function and therefore decide to watch your 2D  
content in 3D. The “TOSHIBA VIDEO PLAYER” will not run the 2Dto3D  
conversion function automatically. Please see the warnings in this  
section as regard to potential copyright infringement and confirm you  
have any necessary authorization.  
The “TOSHIBA VIDEO PLAYER” is intended for playing DVD-Video,  
DVD-VR and video files and for viewing 2D home video content in 3D.  
The 3D playback of any video content not created by the user may  
require the permission of third parties, where such content is protected  
by copyright. The protection of intellectual property rights is essential for  
Toshiba. In this respect, Toshiba underlines that the Player should not  
be used in a manner infringing such rights. It is your responsibility to  
ensure that you do not infringe any applicable intellectual property laws  
when you decide to use the Player and, more specifically, the 2Dto3D  
conversion function of the “TOSHIBA VIDEO PLAYER”.  
Some functions are not functionable during 3D playback. In such cases,  
any corresponding buttons will be disabled.  
You may experience some time lag if you perform any of the following  
operations when the “Video Display Window” is at full-screen size.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-18  
Bring up windows such as [Right-Click Menu], [Settings Window],  
[Title/Chapter Search], [File Select] or [Error Message]. Operate on  
Windows Operate on other applications  
Please make sure AC adapter is used when playing with the enabled  
3D playback feature. 3D playback occurs only in full-screen size. When  
you enable 3D playback, the “Video Display Window” automatically  
enlarges to fullscreen size. In order for 3D playback to work on external  
display/TV, you need a 3D enabled display/TV that has an HDCP  
complaint HDMI port. 3D video content can only be displayed on  
external display using HDMI 1.4. The 3D effect differs among  
individuals. Viewing 3D playback may cause discomfort. In this case,  
please stop viewing and consult your doctor. Please consider if it is  
suitable or a need for time limit before allowing your child to watch a 3D  
content. Depending on the lighting condition of your room, you may  
experience some flickerings when you have the 3D glasses on.  
Upconvert and 3D Playback functions cannot be used at the same time.  
Switching to 3D playback while upconvert is running will cause the  
upconvert function to switch off automatically. Depending on the video  
content, it might not be able to playback in 3D. Only Side-by-Side and  
Interleave 3D video formats are supported for playback of 3D video  
content.  
Starting TOSHIBA VIDEO PLAYER  
Use the following procedure to start TOSHIBA VIDEO PLAYER.  
1. Insert an DVD-Video in the DVD/BD drive while Windows® 7 is running.  
When a DVD-Video disc is set in the BD drive (for models with BD-  
Writer drive or BD-Combo drive), TOSHIBA VIDEO PLAYER starts  
automatically.  
When an DVD-Video disc is set in the DVD drive (for models with DVD  
Super Multi drive), if the application selection screen appears, select  
Play DVD movie, (using TOSHIBA VIDEO PLAYER) to launch the  
TOSHIBA VIDEO PLAYER.  
2. Select Start -> All Programs -> TOSHIBA VIDEO PLAYER ->  
TOSHIBA VIDEO PLAYER to start TOSHIBA VIDEO PLAYER.  
Operating TOSHIBA VIDEO PLAYER  
Notes on Using TOSHIBA VIDEO PLAYER.  
Screen display and available features may vary amongst DVD-Videos  
and scenes.  
If the menu is opened in the Display Area using the Control window's  
Top Menu or Menu buttons, touch pad and mouse menu operations  
may not be able to be used.  
Open TOSHIBA VIDEO PLAYER HELP  
TOSHIBA VIDEO PLAYER features and instructions are also explained in  
detail in "TOSHIBA VIDEO PLAYER HELP". Use the following procedure to  
open "TOSHIBA VIDEO PLAYER HELP".  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-19  
Click the "Help" button (  
) in the Display Area.  
Using WinDVD BD for TOSHIBA  
Please be aware of the following limitations when you use WinDVD BD for  
TOSHIBA:  
Notes on use  
WinDVD BD for TOSHIBA is for Blu-ray Disc playback only. DVD  
playback is not supported. Please use TOSHIBA VIDEO PLAYER for  
DVD playback.  
Playback of high bit rate content may cause frame dropping, audio  
skipping or decrease in computer performance.  
Close all other applications before playing back Blu-ray Disc. Do not  
open any other applications or carry out any other operations during  
Blu-ray Disc playback.  
Do not switch to Sleep or Hibernation Mode while WinDVD BD is  
running. Make sure to close WinDVD BD before going into either Sleep  
or Hibernation Mode.  
Because Blu-ray Disc playback operates according to programs built  
into the content, operation methods, operation screens, sound effects,  
icons and other features may vary from disc to disc. For more  
information on these items refer to instructions included with content or  
contact the content manufacturers directly.  
Make sure to connect the computer's AC adapter when playing a Blu-  
ray Disc.  
WinDVD BD supports AACS (Advanced Access Control System) copy  
protection technology. Renewal of the AACS key integrated into this  
product is required for uninterrupted enjoyment of Blu-ray Disc. An  
Internet connection is required for renewal. AACS key renewal is  
provided free of charge for 5 years after the purchase of this product,  
however renewal beyond 5 years is subject to conditions specified by  
the software provider, Corel Corporation.  
Do not playback Blu-ray Disc while recording television programs using  
"Windows Media Center", "My TV" or other applications. Doing so may  
cause Blu-ray Disc playback or television program recording errors. In  
addition, if pre-scheduled recording starts during Blu-ray Disc Video  
playback it may cause Blu-ray Disc Video playback or television  
program recording errors. Please view Blu-ray Disc Video during times  
when there is no recording prescheduled.  
While playing a BD-J title, keyboard shortcut is ineffective.  
Resume play function cannot be used with some discs on WinDVD BD.  
The interactive function on Blu-ray Discs may not work depending on  
the contents or network situation.  
Region codes for BD drives and media BD drives and their associated  
media are manufactured according to the specifications of three  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-20  
 
marketing regions. Region codes can be set from WinDVD BD  
([Region] tab in [Setup] dialogue). When you purchase BD Video, make  
sure it matches your drive, otherwise it will not play properly.  
To playback video on an external display or TV using WinDVD BD, use  
output devices like external displays or TV that have RGB or HDCP  
supported HDMI port.  
The Blu-ray disc movie can be played only on internal LCD displays or  
external devices connected via an RGB and HDMI output. In Clone  
mode (DualView), WinDVD plays on a display which set to as the  
Primary display and shows black screen on the other displays.  
This product does not play HD DVD discs. Blu-ray discs with high-  
definition content are required for HD viewing.  
3D playback feature  
(Only some models)  
WinDVD BD for TOSHIBA supports the playback of Blu-ray 3D discs on  
external 3D display/TV using HDMI 1.4.  
Before playback Blu-ray 3D discs, configure the 3D Playback.  
1. Click Tools.  
2. Select 3D Playback.  
3. Check Prefer to play in 3D mode to enable 3D playback.  
4. Specify display device information.  
Monitor Type:  
Choose the correct monitor type in the drop-down menu.  
To play on external 3D enabled display/TV with HDMI, set the "HDMI  
1.4 Video Output".  
Display size:  
Enter the size (in inches) of your computer.  
Notes on playing Blu-ray 3D  
For NVIDIA graphics models, Blu-ray 3D playback works only in full  
screen size. When you play the Blu-ray 3D, WinDVD automatically  
resizes to full screen. When you switch back to window mode or  
minimize WinDVD, playback will be stopped. If any message pops up,  
WinDVD will switch back to window mode.  
WinDVD will use all available graphic hardware resources to display 3D  
videos. For NVIDIA graphics models, operations such as Setup, Help,  
some function buttons and remote control functions will be temporarily  
disabled.  
WinDVD BD for TOSHIBA does not support 2Dto3D conversion  
function. Please use “TOSHIBA VIDEO PLAYER” for 3D playback of  
DVD or 3D video file.  
The 3D effect differs among individuals.  
Depending on the lighting condition of your room, you may experience  
some flickerings when you have the 3D glasses on.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-21  
Viewing 3D playback may cause discomfort. In this case, please stop  
viewing and consult your doctor.  
Please consider if it is suitable or a need for time limit before allowing  
your child to watch a 3D content.  
The 3D effect can be shown on external 3D enabled display/TV that  
supports HDMI 1.4.  
To play the Blu-ray 3D on external 3D enabled display/TV, please  
change the display mode to HDMI only (Projector only), and use the 3D  
glasses that come with your external 3D enabled display/TV.  
When play the Blu-ray 3D on external display that does not support 3D  
function, clear “Prefer to play in 3D mode” checkbox in 3D Playback  
properties of WinDVD BD for TOSHIBA.  
Starting WinDVD BD for TOSHIBA  
Use the following procedure to start WinDVD BD for TOSHIBA.  
When a Blu-ray disc is set in the BD drive, WinDVD BD starts  
automatically.  
Select Start -> All Programs -> Corel -> Corel WinDVD BD to start  
WinDVD BD.  
Operating WinDVD BD for TOSHIBA  
Notes on Using WinDVD BD for TOSHIBA.  
Screen display and available features may vary amongst BD-Videos  
and scenes.  
If the menu is opened in the Display Area using the Control window's  
Top Menu or Menu buttons, touch pad and mouse menu operations  
may not be able to be used.  
Open WinDVD BD for TOSHIBA HELP  
WinDVD BD features and instructions are also explained in detail in  
"WinDVD Help". Use the following procedure to open "WinDVD Help".  
Click the "Corel Guide" button ( ) in the Display Area and select the  
"Launch Help" button.  
Wireless communications  
The computer’s wireless communication function supports some wireless  
communication devices.  
Only some models are equipped with both Wireless LAN and Bluetooth  
functions.  
Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a  
microwave oven or in areas subject to radio interference or magnetic  
fields. Interference from a microwave oven or other source can disrupt  
Wi-Fi or Bluetooth operation.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-22  
   
Turn all wireless functionalities off when near a person who may have a  
cardiac pacemaker implant or other medical electric device. Radio  
waves may affect pacemaker or medical device operation, possibly  
resulting in serious injury. Follow the instruction of your medical device  
when using any wireless functionality.  
Always turn off wireless functionality if the computer is near automatic  
control equipment or appliances such as automatic doors or fire  
detectors. Radio waves can cause malfunction of such equipment,  
possibly resulting in serious injury.  
It may not be possible to make a network connection to a specified  
network name using the ad hoc network function. If this occurs, the new  
network(*) will have to be configured for all computers connected to the  
same network in order to re-enable network connections.  
* Please be sure to use new network name.  
Wireless LAN  
The Wireless LAN is compatible with other LAN systems based on Direct  
Sequence Spread Spectrum / Orthogonal Frequency Division Multiplexing  
radio technology that complies with the IEEE802.11 Wireless LAN  
standard.  
Frequency Channel Selection of 5GHz for IEEE 802.11a or/and  
IEEE802.11n  
Frequency Channel Selection of 2.4GHz for IEEE 802.11b/g or/and  
IEEE802.11n  
Roaming over multiple channels  
Card power management  
Wired Equivalent Privacy (WEP) data encryption based on an 128-bit  
encryption algorithm  
Wi-Fi Protected Access™ (WPA™)  
The transmission speed over the wireless LAN, and the distance over  
which the wireless LAN can reach, may vary depending on surrounding  
electromagnetic environment, obstacles, access point design and  
configuration, client design and software/hardware configurations. The  
transmission rate described is the theoretical maximum speed as specified  
under the appropriate standard - the actual transmission speed will be  
lower than the theoretical maximum speed.  
Setting  
1. Please make sure that the Wireless Communication function is on.  
2. Click Start -> Control Panel -> Network and Internet -> Network and  
Sharing Center.  
3. Click Set up a new connection or network.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-23  
 
4. Follow the wizard. You will need the name of the wireless network  
together with security settings. Consult the documentation  
accompanied with your router or ask your wireless network  
administrator for the settings.  
Security  
TOSHIBA strongly recommend that you enable encryption functionality,  
otherwise your computer will be open to illegal access by an outsider  
using a wireless connection. If this occurs, the outsider may illegally  
access your system, eavesdrop, or cause the loss or destruction of  
stored data.  
TOSHIBA is not liable for the loss of data due to eavesdropping or  
illegal access through the wireless LAN and the damage thereof.  
Card Specifications  
Form Factor  
Compatibility  
PCI Express Mini Card  
IEEE 802.11 Standard for Wireless LANs  
Wi-Fi (Wireless Fidelity) certified by the Wi-Fi  
Alliance. The "Wi-Fi CERTIFIED" logo is a  
certification mark of the Wi-Fi Alliance.  
Network Operating  
System  
Microsoft Windows Networking  
Media Access  
Protocol  
CSMA/CA (Collision Avoidance) with  
Acknowledgment (ACK)  
Radio Characteristics  
Radio Characteristics of Wireless LAN module may vary according to:  
Country/region where the product was purchased  
Type of product  
Wireless communication is often subject to local radio regulations.  
Although Wireless LAN wireless networking products have been designed  
for operation in the license-free 2.4GHz and 5GHz band, local radio  
regulations may impose a number of limitations to the use of wireless  
communication equipment.  
Radio Frequency  
Band 5GHz (5150-5850 MHz) (Revision a and  
n)  
Band 2.4GHz (2400-2483.5 MHz) (Revision b/g  
and n)  
The range of the wireless signal is related to the transmit rate of the  
wireless communication. Communications at lower transmit range may  
travel larger distances.  
The range of your wireless devices can be affected when the antennas  
are placed near metal surfaces and solid high-density materials.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-24  
Range is also impacted due to "obstacles" in the signal path of the radio  
that may either absorb or reflect the radio signal.  
Bluetooth wireless technology  
Some computers in this series have Bluetooth wireless communication  
function which eliminates the need for cables between electronic devices  
such as computers, printers and mobile phones. When it is enabled,  
Bluetooth provides the wireless personal area network environment which  
is safe and trustworthy, that is quick and easy.  
You cannot use the computer's built-in Bluetooth functions and an external  
Bluetooth adaptor simultaneously. For reference, Bluetooth wireless  
technology has the following features:  
Worldwide operation  
The Bluetooth radio transmitter and receiver operate in the 2.4GHz band,  
which is license-free and compatible with radio systems in most countries  
in the world.  
Radio links  
You can easily establish links between two or more devices, with these  
links being maintained even if the devices are not within a line-of-sight of  
each other.  
Security  
Two advanced security mechanisms ensure a high level of security:  
Authentication prevents access to critical data and makes it impossible  
to falsify the origin of a message.  
Encryption prevents eavesdropping and maintains link privacy.  
Bluetooth Stack for Windows by TOSHIBA  
Please note that this software is specifically designed for the following  
operating systems:  
Windows 7  
Information regarding the use of this software with these operating systems  
is listed below, with further details being contained with the electronic help  
files supplied with the software.  
This Bluetooth Stack is based on the Bluetooth Version  
1.1/1.2/2.0+EDR/2.1+EDR/3.0/3.0+HS specification, depending on the  
model you purchased. However, TOSHIBA cannot confirm the compatibility  
between any computing products and/or other electronic devices that use  
Bluetooth, other than TOSHIBA notebook computers.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-25  
 
Release Notes related to the Bluetooth Stack for Windows  
by TOSHIBA  
1. Fax application software: Please be aware that there is some fax  
application software that you cannot use on this Bluetooth Stack.  
2. Multi-user considerations: The use of Bluetooth is not supported in a  
multi-user environment. This means that, when you use Bluetooth,  
other users that are logged into the same computer will not be able to  
use this type of functionality.  
Product Support:  
The latest information regarding operating system support, language  
support or available upgrades can be found on our web site  
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or  
www.pcsupport.toshiba.com in the United States.  
LAN  
The computer has built-in support for Ethernet LAN (10 megabits per  
second, 10BASE-T), Fast Ethernet LAN (100 megabits per second,  
100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second,  
1000BASE-T).  
This section describes how to connect/disconnect to a LAN.  
Do not install or remove a memory module while Wake-up on LAN is  
enabled.  
The Wake-up on LAN function consumes power even when the system  
is off. Leave the AC adaptor connected while using this feature.  
The Link speed (10/100/1000 megabits per second) changes  
automatically depending on the network conditions (connected device,  
cable or noise and so on).  
LAN cable types  
The computer must be configured properly before connecting to a LAN.  
Logging onto a LAN using the computer’s default settings could cause a  
malfunction in LAN operation. Check with your LAN administrator regarding  
set-up procedures.  
If you are using Gigabit Ethernet LAN (1000 megabits per second,  
1000BASE-T), be sure to connect with a CAT5e cable or higher. You  
cannot use a CAT3 or CAT5 cable.  
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-  
TX), be sure to connect with a CAT5 cable or higher. You cannot use a  
CAT3 cable.  
User’s Manual  
3-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you  
can connect with a CAT3 or higher cable.  
Connecting the LAN cable  
To connect the LAN cable, follow the steps as detailed below:  
Connect the AC adaptor before connecting the LAN cable. The AC  
adaptor must remain connected during LAN use. If you disconnect the  
AC Adaptor while the computer is accessing a LAN, the system may  
hang up.  
Do not connect any other cable to the LAN jack except the LAN cable.  
Otherwise, malfunctions or damage may occur.  
Do not connect any power supplying device to the LAN cable that is  
connected to the LAN jack. Otherwise, malfunctions or damage may  
occur.  
1. Turn off the power to all external devices connected to the computer.  
2. Plug one end of the cable into the LAN jack. Press gently until you hear  
the latch click into place.  
Figure 3-6 Connecting the LAN cable (Satellite L770/L775/L770D/L775D/satellite  
Pro L770/L775/L770D/L775D)  
1
2
1. LAN jack  
2. LAN cable  
3. Plug the other end of the cable into a LAN hub connector or router.  
Check with your LAN administrator and hardware or software vendor  
before using or configuring a network connection.  
Optional devices  
Optional devices can expand the computer's capabilities and its versatility.  
This section describes the connection or installation of the following  
devices:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-27  
   
Cards/memory  
Memory media slot  
Additional memory module  
Peripheral devices  
External monitor  
HDMI  
Other  
Security lock  
Optional TOSHIBA accessories  
Memory media slot  
The computer is equipped with a memory media slot that can  
accommodate some kinds of memory media with various memory  
capacities so that you can easily transfer data from devices, such as digital  
cameras and Personal Digital Assistants.  
Keep foreign objects out of the memory media slot. Never allow metal  
objects, such as screws, staples and paper clips, to enter the computer or  
Keyboard. Foreign metal objects can create a short circuit, which can  
cause computer damage and fire, possibly resulting in serious injury.  
Please note that an adaptor is required to use miniSD/microSD Card.  
Please note that not all memory media have been tested and verified to  
work correctly. Therefore, it is not possible to guarantee that all memory  
media will operate properly.  
The slot does not support Magic Gate functions.  
Figure 3-7 Examples of memory media  
Secure Digital (SD) Card  
microSD card adaptor and  
microSD card  
Memory Stick  
MultiMediaCard (MMC)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-28  
   
Memory media  
This section provides the important safety precautions in order to handle  
your memory media.  
Points to note about the memory media card  
SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music  
Initiative), which is a technology adopted to prevent unlawful copy or  
playback of digital music. For this reason, you cannot copy or playback  
protected material on another computer or other device, and you may not  
reproduce any copyrighted material except for your personal enjoyment.  
Below is a simple explanation for distinguishing SD memory cards from  
SDHC memory cards.  
SD, SDHC and SDXC memory cards appear the same externally.  
However, the logo on memory cards is different, so pay careful attention  
to the logo when purchasing.  
The SD memory card logo is (  
The SDHC memory card logo is (  
The SDHC memory card logo is (  
).  
).  
).  
TM  
The maximum capacity of SD memory cards is 2GB. The maximum  
capacity of SDHC memory cards is 32GB.  
Card Type  
SD  
Capacities  
8MB, 16MB, 32MB, 64MB, 128MB, 256MB,  
512MB, 1GB, 2GB  
SDHC  
SDXC  
4GB, 8GB, 16GB, 32GB  
64GB  
Memory media format  
New media cards are formatted according to specific standards. If you wish  
to reformat a media card, be sure to do so with a device that uses media  
cards.  
Formatting an memory media card  
Memory media cards are sold already formatted in conformity to specific  
standards. If you reformat an memory card, be sure to reformat it with a  
device such as digital camera or digital audio player that uses the memory  
cards, not with the format command provided within Windows.  
Should you need to format all areas of the memory card, including the  
protected area, you will need to obtain an appropriate application that  
applies the copy protection system.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-29  
     
Media care  
Observe the following precautions when handling the card.  
Card care  
Do not twist or bend cards.  
Do not expose cards to liquids or store in humid areas or lay media  
close to containers of liquid.  
Do not touch the metal part of a card or expose it to liquids or let it get  
dirty.  
After using card, return it to its case.  
The card is designed so that it can be inserted only one way. Do not try  
to force the card into the slot.  
Do not leave a card partially inserted in the slot. Press the card until you  
hear it click into place.  
Memory card care  
Set the write-protect switch to the lock position, if you do not want to  
record data.  
Memory cards have a limited lifespan, so it is important to backup  
important data.  
Do not write to a card if the battery power is low. Low power could affect  
writing accuracy.  
Do not remove a card while read/write is in progress.  
For more details on using memory cards, see manuals accompanying the  
cards.  
About the write-protect  
The memory media cards have a function for protect.  
SD Card (SD memory card, SDHC memory card and SDXC memory  
card)  
Memory Stick (Memory Stick, Memory Stick PRO)  
Set the write-protect switch to the lock position, if you do not want to record  
data.  
Inserting a memory media  
The following instructions apply to all types of supported media devices. To  
insert a memory media, follow the steps as detailed below:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-30  
         
1. Turn the memory media so that the contacts (metal areas) are face  
down.  
2. Insert the memory media into the memory media slot on the left of the  
computer.  
3. Press the memory media gently to ensure a firm connection is made.  
Figure 3-8 Inserting a memory media (Satellite L770/L775/L770D/L775D/satellite  
Pro L770/L775/L770D/L775D)  
1
2
1. Memory media slot  
2. Memory media  
Make sure memory media is oriented properly before you insert it. If  
you insert the media in wrong direction, you may not be able to remove  
it.  
When inserting memory media, do not touch the metal contacts. You  
could expose the storage area to static electricity, which can destroy  
data.  
Do not turn the computer off or switch to Sleep Mode or Hibernation  
Mode while files are being copied - doing so may cause data to be lost.  
Removing a memory media  
The following instructions apply to all types of supported media devices. To  
remove a memory media, follow the steps as detailed below:  
1. Open the Safely Remove Hardware and Eject Media icon on the  
Windows Taskbar.  
2. Point to memory media and click the left Touch Pad control button.  
3. Grasp the media and pull it out of the computer to remove it.  
Make sure the Memory Media slot indicator is out before you remove  
the memory media or turn off the computer’s power. If you remove the  
memory media or turn off the power while the computer is accessing  
the memory media, you may lose data or damage the media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-31  
     
Do not remove the memory media while the computer is in Sleep or  
Hibernation Mode. The computer could become unstable or data in the  
memory media could be lost.  
Do not remove only the miniSD/microSD Card while leaving the adaptor  
in the memory media slot.  
Additional memory module  
You can install additional memory into the computer in order to increase the  
amount of system memory that is available. This section describes how to  
install and remove optional memory modules.  
You should place a mat beneath the computer in order to prevent the  
computer's lid from becoming scratched or damaged when you are  
installing/replacing the memory module. In this instance you should  
avoid mats that are made of materials that hold or generate static  
electricity.  
When installing or removing a memory module, you must ensure that  
you do not touch any other internal areas of the computer.  
Use only memory modules approved by TOSHIBA.  
Do not try to install or remove a memory module under the following  
conditions.  
a.The computer is turned on.  
b.The computer was shut down in either Sleep or Hibernation Mode.  
c.Wake-up on LAN is enabled.  
d.The wireless communication function is on.  
e.Sleep and Charge function is enabled.  
Be careful not to let screws or other foreign matter fall into the  
computer. It could cause malfunction or electric shock.  
Additional memory module is a precision electronic component that  
may be fatally damaged by static electricity. Since the human body can  
carry static electricity, it is important that you discharge yourself before  
touching or installing any additional memory modules. To discharge  
your body’s static electricity, simply touch any metal close to you with  
bare hands.  
Use a point size 1 Phillips screwdriver to remove and fasten the screw - the  
use of an incorrect screwdriver can damage the screw heads.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-32  
 
Installing a memory module  
To install a memory module, follow the steps as detailed below:  
1. Shut down the computer - make sure the Power indicator is off (refer to  
the Turning off the power section in Chapter 1, Getting Started if  
required).  
2. Remove the AC adaptor and all cables and peripherals connected to  
the computer.  
3. Close the display panel.  
4. Turn the computer upside down and remove the battery pack (refer to  
Replacing the battery pack section in Chapter 5, Power and Power-Up  
Modes, if required).  
5. Loosen the screw securing the memory module cover in place - please  
note that the screw is attached to the cover in order to prevent them  
from being lost.  
Use a point size 1 Phillips screwdriver.  
6. Slide your fingernail or a thin object under the cover and lift it off.  
Figure 3-9 Removing the memory module cover (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
2
1
1. Screw  
2. Memory module cover  
7. Align the notch of the memory module with that of the memory slot and  
gently insert the module into the slot at about a 30 degree angle before  
holding it down until the latches on either side snap into place.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-33  
 
Figure 3-10 Seating the memory module (Satellite L770/L775/L770D/L775D/satellite  
Pro L770/L775/L770D/L775D)  
1
2
3
1. Notch  
2. Slot B  
3. Slot A  
Never allow metal objects, such as screws, staples and paper clips, to  
enter the computer. Foreign metal objects can create a short circuit,  
which can cause computer damage and fire, possibly resulting in  
serious injury.  
Do not touch the connectors on the memory module or on the  
computer. Debris on the connectors may cause memory access  
problems.  
The slot A is reserved for the first memory module. Use the slot B for  
expanded memory. If only one module is installed, use the slot A.  
Align the grooves along the edges of the memory module with the  
locking tabs on the connector and insert the module into the connector  
firmly - if you find it difficult to install the memory module, gently prise  
the locking tabs outwards using the tip of your finger.  
Please also ensure that you hold the memory module along its left and  
right hand edges - the edges with the grooves in.  
8. Seat the memory module cover in place and secure it with the screw.  
Take care to ensure that the memory module cover is firmly closed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-34  
Figure 3-11 Seating the memory module cover (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
2
1
1. Screw  
2. Memory module cover  
9. Install the battery pack - refer to Replacing the battery pack section in  
Chapter 5, Power and Power-Up Modes, if required.  
10. Turn your computer over.  
11. Turn the computer on and make sure the added memory is recognized -  
to confirmed it, Start -> Control Panel -> System and Security ->  
System icon.  
Removing a memory module  
To remove the memory module, follow the steps as detailed below:  
1. Shut down the computer - make sure the Power indicator is off (refer to  
the Turning off the power section in Chapter 1, Getting Started if  
required).  
2. Remove the AC adaptor and all cables and peripherals connected to  
the computer.  
3. Close the display panel.  
4. Turn the computer upside down and remove the battery pack.  
5. Loosen the screw securing the memory module cover in place - please  
note that the screw is attached to the cover in order to prevent them  
from being lost.  
6. Slide your fingernail or a thin object under the cover and lift it off.  
7. Push the latches away from the module in order to release it - a spring  
will force one end of the module up at an angle.  
8. Grasp the module by its edges and remove it from the computer.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-35  
 
If you use the computer for a long time, the memory modules and the  
circuits locating close to the memory modules will become hot. In this  
case, let them cool to room temperature before you replace them. Or  
you will get burnt if you touch any of them.  
Do not touch the connectors on the memory module or on the  
computer. Debris on the connectors may cause memory access  
problems.  
Figure 3-12 Removing the memory module (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
1
1
1. Latches  
9. Seat the memory module cover in place and secure it with the screw.  
Take care to ensure that the memory module cover is firmly closed.  
10. Install the battery pack.  
11. Turn your computer over.  
External monitor  
An external analog monitor can be connected to the External RGB monitor  
port on the computer. To connect a monitor, follow the steps as detailed  
below:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-36  
 
Connecting the monitor cable  
1. Connect the monitor cable to the External RGB monitor port.  
Figure 3-13 Connecting the monitor cable to the External RGB monitor port (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
1
2
1. External RGB monitor port  
2. Monitor cable  
There are no fastening screws for an external monitor cable on this  
computer's External RGB monitor port. However, external monitor cables  
which have connectors with fastening screws can still be used.  
2. Turn the external monitor's power on.  
When you turn on the power, the computer will automatically recognize the  
monitor and determine whether it is a color or monochrome device. In the  
event that you find that there are issues getting an image displayed on the  
correct monitor, you should consider using the FN + F5 hot key to change  
the display settings (if you then disconnect the external monitor before you  
turn the computer's power off, be sure to press FN + F5 hot key again to  
switch to the internal display).  
Please refer to the The Keyboard section for further details on using hot  
keys to change the display setting.  
Do not disconnect the external monitor while in Sleep or Hibernation Mode.  
Turn off the computer before disconnecting the external monitor.  
When displaying desktop at external analog monitor, desktop is sometimes  
displayed on the center of the monitor with black bars around desktop (with  
small size).  
At that time, please read the manual of the monitor and set the display  
mode which is supporting at the monitor. Then it will be displayed with  
suitable size with correct aspect ratio.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-37  
HDMI  
Some models are equipped with an HDMI out port.  
An HDMI monitor can be connected to the HDMI out port on the computer.  
To connect monitor, follow the steps as detailed below:  
As the port operation of all HDMI (High-Definition Multimedia Interface)  
monitors have not been confirmed, some HDMI monitors may not function  
properly.  
Connecting the HDMI out port  
1. Plug one end of the HDMI cable into the HDMI out port of the HDMI  
device.  
2. Plug the other end of the HDMI cable into the HDMI out port on your  
computer.  
Figure 3-14 Connecting the HDMI out port (Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D)  
1
2
1. HDMI out port  
2. HDMI cable  
Please connect or disconnect an HDMI device to or from the computer  
under the following conditions:  
The computer is turned on.  
The computer is completely turned off.  
Do not do so when the computer is in Sleep Mode or Hibernation Mode.  
When you connect a television or external monitor to the HDMI port, the  
display output device is set to HDMI.  
When you unplug the HDMI cable and re-plug it, please wait at least 5  
seconds before you re-plug the HDMI cable again.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-38  
 
When you change the display output device by hot key like FN + F5, the  
playback device may not switch automatically. In this case, in order to  
set the playback device to the same device as the display output  
device, please adjust the playback device manually by the following  
steps:  
a. Click Start -> Control Panel -> Hardware and Sound -> Sound.  
b. In the Playback tab, select the playback device which you want to  
switch to.  
c. To use the internal speakers on your computer, select Speakers. To  
use the television or the external monitor that you have connected to  
the computer, select a different playback device.  
d. Click the Set Default button.  
e. Click OK to close the Sound dialog.  
Settings for display video on HDMI  
To view video on the HDMI device, be sure to configure the following  
settings otherwise you may find that nothing is displayed.  
Be sure to use the FN + F5 HotKey to select the display device before  
starting to play video. Do not change the display device while playing video.  
Do not change the display device under the following conditions.  
While data is being read or written.  
While communication is being carried out.  
Select HD Format  
To select the display mode, follow the steps as detailed below:  
1. Click Start and click Control Panel.  
2. Click Appearance and Personalization.  
3. Click Display.  
4. Click Change display settings.  
5. Click Advanced settings.  
6. Click List All Modes.  
7. Select the one of the below selection at List All Modes.  
Display mode at List All Modes  
HD Format  
1080p  
1080i  
1920 by 1080, True Color (32bit), 60Herts  
1920 by 1080, True Color (32bit), 30Herts (Interlaced)  
1280 by 720, True Color (32bit), 60Herts  
720 by 576, True Color (32bit), 50Herts  
720 by 480, True Color (32bit), 60Herts  
720p  
576p  
480p  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-39  
The above display mode is a typical HDMI display mode. The selectable  
display modes will vary for different HDMI monitors.  
HDMI 1.4 3D Video  
Only some models are supported with NVDIA HDMI 1.4 3D Video feature.  
When a television is connected to HDMI port and the television is  
supporting 3D feature, the NVDIA HDMI 1.4 3D Video feature may be  
enabled through the following procedure.  
Before setting up the HDMI 1.4 3D Video feature, please ensure the  
Internet setup is completed in order to receive notifications via the Internet.  
As not all 3D televisions' port operations have been fully tested yet,  
HDMI 1.4 3D Video feature may not be functional on some 3D  
television models.  
Follow the steps as detailed below to setup HDMI 1.4 3D Video and  
don't execute other operation while running 3D Vision Setup.  
1. Connect to a television which supports 3D.  
2. Press FN + F5 and set display device to "HDMI device only".  
3. Click Start -> All Programs -> NVIDIA Corporation -> 3D Vision ->  
Enable 3D Vision.  
4. "Setup HDMI 1.4 3D Video" screen will appear (When the "Set up  
NVIDIA 3D Vision" screen displays, HDMI 1.4 3D Video feature is not  
supported on your television. Click "Exit" and finish setup).  
5. Click the Next button.  
6. "Turn on your glasses" screen will appear. Turn on your glasses of 3D  
TV and click the Next button.  
7. When the "Test your hardware setup" screen appears, put on your  
glasses, close your eyes alternately and select the image you see.  
8. Click the Next button (When "Hardware test failed" screen appears,  
your television does not support HDMI 1.4 3D Video feature. Click "Exit"  
and finish setup).  
9. When "Verify your ability to view stereoscopic 3D Content" screen  
appears, put on your glasses and select the image you see.  
10. Click Health and Safety Information, and Internet Explorer will be  
launched and displays "Health and Safety Information". Please read it  
carefully.  
11. Select "GeForce 3D Vision Setup Wizard" from the task bar after  
reading the information.  
12. Select the "I have read and understand the Health and Safety  
Information" check box.  
13. Click the Next button.  
14. Click the Finish button.  
HDMI 1.4 3D Video feature is only supported at two resolutions: 1920x1080  
User’s Manual  
3-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24Hz and 1280x720 60Hz.  
The resolution can be reconfigured by the following procedure:  
1. Click Start -> Control Panel -> Hardware and Sound -> NVIDIA  
Control Panel.  
2. Click Change resolution from Select a Task....  
3. Choose one of the below resolutions from "Resolution":  
HD 3D: 1080p, 1920 x 1080  
HD 3D: 720p, 1280 x 720  
4. Click the Apply button.  
You are now ready to watch 3D video on your 3D TV.  
Security lock  
A security locks enable you to anchor your computer a desk or other heavy  
object in order to help prevent unauthorized removal or theft. The computer  
has a security lock slot on its right side into which you can attach one end of  
the security cable, while the other end attaches to a desk or similar object.  
The methods used for attaching security cables differ from product to  
product. Please refer to the instructions for the product you are using for  
more information.  
Connecting the security lock  
In order to connect a security cable to the computer, follow the steps as  
detailed below:  
1. Turn the computer so its right side faces you.  
2. Align the security cable with the lock slot and secure it in place.  
Figure 3-15 Security lock (Satellite L770/L775/L770D/L775D/satellite Pro  
L770/L775/L770D/L775D)  
1
2
1. Security lock slot  
Optional TOSHIBA Accessories  
You are able to add a number of options and accessories in order to make  
your computer even more powerful and convenient to use. For reference,  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-41  
     
the following list details some of the items that are available from your  
reseller or TOSHIBA dealer:  
Memory Kit  
A 1 GB, 2 GB or 4GB memory module (DDR3-  
1066/1333) can easily be installed in the computer.  
The available option memory depends on  
TOSHIBA authorization.  
Universal AC  
Adaptor  
If you frequently use your computer at more than  
one site, it may be convenient to purchase an  
additional AC adaptor to be kept at each site in  
order to remove the need to always carry the  
adaptor with you.  
Battery Pack  
An additional battery pack can be purchased for  
use as either a spare or replacement. Please refer  
to Chapter 5, Power and Power-Up Modes for  
further information.  
Sound System  
This section describes some of the audio control functions.  
Volume Mixer  
The Volume Mixer utility lets you control the audio volume for playback of  
devices and applications under Windows.  
To launch the Volume Mixer utility, right click on the speaker icon on the  
Taskbar, and select Open Volume Mixer from the sub menu.  
To adjust the volume level of speakers or headphones, move the  
Speakers slider.  
To adjust the volume level of an application that you are using, move  
the slider for the corresponding application.  
Microphone Level  
Follow the steps below to change the microphone recording level.  
1. Right click on the speaker icon on the Taskbar, and select Recording  
devices from the sub menu.  
2. Select Microphone, and click Properties.  
3. On the Levels tab move the Microphone slider to increase or decrease  
the microphone volume level.  
If you feel the microphone volume level is inadequate, move the  
Microphone Boost slider to a higher level.  
Audio Enhancements  
In order to apply the sound effects for your current speaker, follow the steps  
below.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-42  
     
1. Right click on the speaker icon on the Taskbar, and select Playback  
Devices from the sub menu.  
2. Select Speakers, and click Properties.  
3. On the Enhancements tab select the sound effects you would like, and  
click Apply.  
Realtek HD Audio Manager  
You can confirm and change the audio configuration using the Realtek  
Audio Manager. To launch the Realtek Audio Manager, click Start ->  
Control Panel, select Large icons from View by, then click Realtek HD  
Audio Manager.  
When you first launch the Realtek Audio Manager, you will see two device  
tabs. Speakers is the default output device. Microphone is the default  
input device. To change the default device, click the Set Default Device  
button under the chosen device tab.  
Information  
Click the information button  
to view hardware information, software  
information, and language setting.  
Power Management  
The audio controller in your computer can be turned off when the audio  
function is not used. To adjust the configuration of audio power  
management, click the Power Management button  
.
When audio power management is enabled, the circle button at the  
upper left of the Power Management is blue and convex.  
When audio power management is disabled, the button is black and  
concave.  
Speaker Configuration  
Click the Auto Test button  
to confirm the internal speakers or the  
headphone sound is coming from the right direction.  
Default Format  
You can change the sample rate and bit depth of sound.  
Dolby Advanced Audio  
Dolby Advanced Audio provides a stunning listening experience from any  
pair of speakers or headphones. Adding a new level of realism to movies,  
music, and games, this is the quality audio customers have been missing  
from your computers. The Dolby Advanced Audio feature is supported by  
some models.  
Dolby Advanced Audio includes:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-43  
High-Frequency Enhancer: Analyzes and restores high frequencies lost  
during encoding. Works on any speaker for a higher level of audio than  
was previously possible.  
Audio Optimization: Corrects common audio problems caused by  
laptop limitations for a better entertainment experience.  
Natural Bass: Extends the bass response of any speakers by up to an  
octave.  
Dolby Headphone: Enables personal surround sound using any set of  
headphones.  
To access Dolby Advanced Audio function, follow the steps as detailed  
below:  
1. Right-click on the speaker icon on the Taskbar, and select Playback  
Devices from the sub menu.  
2. Select Speakers, and click Properties.  
3. Click the Dolby tab.  
Video mode  
Video mode settings are configured via the Screen Resolution dialog.  
To open the Screen Resolution dialog, click Start -> Control Panel ->  
Appearance and Personalization -> Display -> Change display  
settings.  
If you are running some applications (for example a 3D application or video  
playback and so on), you may see some disturbance, flickering or frame  
dropping on your screen.  
If that occurs, adjust the resolution of display, lowering it until the screen is  
displayed properly.  
Disabling Windows AeroTM may also help correct this issue.  
Computer Handling  
This section explains computer handling and maintenance.  
Cleaning the computer  
To help ensure long, trouble-free operation, keep the computer free of dust  
and dirt, and use care with all liquids around it.  
Be careful not to spill liquids into the computer. If the computer does get  
wet, turn the power off immediately and let the computer dry completely  
- in these circumstance you should get the computer inspected by an  
authorized service provider in order to assess the scope of any  
damage.  
User’s Manual  
3-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Clean the plastics of the computer using a slightly water dampened  
cloth.  
You can clean the display screen by spraying a small amount of glass  
cleaner onto a soft, clean cloth and then wiping the screen gently with  
the cloth.  
Never spray cleaner directly onto the computer or let liquid run into any part  
of it. Never use harsh or caustic chemical products to clean the computer.  
Moving the computer  
While the computer is designed for flexible day-to-day usage you should  
exercise a few simple precautions when moving it in order to help ensure  
trouble-free operation.  
Make sure all disk/disc activity has ended before moving the computer -  
check that the HDD and other indicators (if any) on the front of the  
computer are off.  
Turn off (shut down) the computer.  
Disconnect the AC adaptor and all peripherals before moving the  
computer.  
Close the display panel.  
Do not pick up the computer by its display panel.  
Before carrying your computer, shut it down, disconnect the AC adaptor  
and allow it to cool down - a failure to follow this instruction may result in  
minor heat injury.  
Be careful not to subject the computer to impact or shock - a failure to  
follow this instruction could result in damage to computer, computer  
failure or loss of data.  
Never transport your computer with any cards installed - this may cause  
damage to either the computer and/or the card resulting in product  
failure.  
Always use a suitable carry case when transporting the computer.  
When carrying your computer, be sure to hold it securely so that it does  
not fall or hit anything.  
Do not carry your computer by holding any of its protruding elements.  
Heat dispersal  
To protect against overheating, the processor is equipped with an internal  
temperature sensor which activates a cooling fan or lowers the processing  
speed if the computer's internal temperature rises to a certain level. You are  
able to select whether to control this temperature by either turning on the  
fan first, then if necessary lowering the processor speed, or by lowering the  
processor speed first, then if necessary turning on the fan. Both of these  
functions are controlled through the Power Options.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-45  
     
When the processor's temperature falls within normal range, the fan will be  
turned off and the processor operation returned to its standard speed.  
If the processor's temperature reaches an unacceptably high level with  
either setting, the computer automatically shuts down to prevent any  
damage. In this instance all unsaved data in memory will be lost.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-46  
Chapter 4  
U
4
r
e
t
p
a
h
C
tilities & Advanced Usage  
This chapter describes the utilities and special features of this computer,  
and the advanced usage of some utilities.  
Utilities and Applications  
This section describes the pre-installed utilities that come with the  
computer and details how to start them. For further information on their  
operation, you may refer to each utility's online manual, help files or  
README.TXT file (if applicable).  
TOSHIBA Power  
Saver  
TOSHIBA Power Saver provides you with the  
features of more various power supply  
managements.  
TOSHIBA PC  
Diagnostic Tool  
The TOSHIBA PC Diagnostic Tool will display  
basic system configuration information and allow  
the functionality of some of the computer's built-in  
hardware devices to be tested.  
TOSHIBA Password The TOSHIBA Password utility allows you to set a  
Utility  
password in order to restrict access to the  
computer.  
TOSHIBA Flash  
Cards  
The TOSHIBA Flash Cards provide a quick way to  
modify selected system functions.  
Hot key function  
HW Setup  
This utility allows you to customize your hardware  
settings according to the way you work with the  
computer and the peripherals you use.  
TOSHIBA  
Accessibility  
The TOSHIBA Accessibility utility provides support  
to movement impaired users when they need to  
use the TOSHIBA Hot-key functions. In use, the  
utility allows you to make the FN key "sticky", that  
is you can press it once, release it, and they press  
one of the Function keys in order to access its  
specific function. When set, the FN key will remain  
active until another key is pressed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-1  
     
TOSHIBA Face  
Recognition  
TOSHIBA Face Recognition uses a face  
verification library to verify the face data of users  
when they log in to Windows. If the verification is  
successful, the user will be logged into Windows  
automatically. The user can thus avoid having to  
enter a password or the like, which makes the  
login process easier.  
For more information, please refer to the Using the  
TOSHIBA VIDEO  
PLAYER  
This software is provided for playback of Video.  
It has an on-screen interface and functions. Click  
Start -> All Programs -> TOSHIBA VIDEO  
PLAYER -> TOSHIBA VIDEO PLAYER.  
For details on how to use TOSHIBA VIDEO  
PLAYER, see the help file.  
Bluetooth Stack for This software enables communication between the  
Windows by Toshiba computer and external Bluetooth devices such as  
printers and mobile phones.  
Bluetooth functions cannot be used in models that  
do not have a Bluetooth module installed.  
TOSHIBA Assist  
TOSHIBA Assist is a graphical user interface that  
provides access to specific tools, utilities and  
applications that make the use and configuration  
of the computer easier.  
To access this utility, click Start -> All Programs  
-> TOSHIBA -> Utilities -> TOSHIBA Assist .  
TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that  
improve the ease and control of communication  
devices and network connections, help in the  
identification of communication problems and  
allow the creation of profiles if you need to switch  
between different locations and communication  
networks.  
To access this utility, click Start -> All Programs  
-> TOSHIBA -> ConfigFree.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-2  
     
TOSHIBA eco Utility This computer is equipped with "eco mode". This  
mode slightly lowers performance of some devices  
to reduce electric power consumption. You can  
realize measurable power savings by using it  
continuously. TOSHIBA eco Utility helps you  
monitor your power savings by showing  
approximate real time power consumption.  
Furthermore, it shows approximate accumulated  
power consumption and approximate accumulated  
power savings when using eco mode daily, weekly,  
and monthly. You can track power savings by  
using eco mode continuously.  
To access this utility, click Start -> All Programs  
-> TOSHIBA -> Utilities -> eco Utilities.  
TOSHIBA Disc  
Creator  
You can create CDs and DVDs in a number of  
formats including audio CDs that can be played on  
a standard CD player, and data CD/DVDs which  
can store copies of the files and folders on your  
computer's hard disk drive.  
To start this utility, click Start -> All Programs ->  
TOSHIBA -> CD&DVD Applications -> Disc  
Creator.  
TOSHIBA DVD-RAM This utility has the function of Physical Format and  
Utility  
Write-Protect to DVD-RAM. This utility is contained  
the setup module of TOSHIBA Disc Creator. To  
start this utility, click Start -> All Programs ->  
TOSHIBA -> CD&DVD Applications -> DVD-  
RAM Utility.  
TOSHIBA HDD/SSD This utility includes wizard functions to monitor the  
Alert Utility  
Disk Drive operating status and execute the  
system backup.  
To access the utility, click Start -> All Programs ->  
TOSHIBA -> Utilities -> HDD SSD Alert.  
TOSHIBA Service  
Station  
This application allows your computer to  
automatically search for TOSHIBA software  
updates or other alerts from TOSHIBA that are  
specific to your computer system and its  
programs. When enabled, this application  
periodically transmits to our servers a limited  
amount of system information, which will be  
treated in strict accordance with the rules and  
regulations as well as applicable data protection  
law.  
To access this utility, click Start -> All Programs  
-> TOSHIBA -> Utilities -> Service Station.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-3  
     
TOSHIBA Sleep  
Utility  
This utility is able to either enable or disable the  
Sleep and Charge function.  
It shows the positions of USB ports that support  
the USB Sleep and Charge function and displays  
the battery's remaining capacity.  
To access this utility, click Start -> All Programs  
-> TOSHIBA -> Utilities -> Sleep Utility.  
TOSHIBA Bulletin  
Board  
Bulletin Board is a convenient place to pin things  
to visually organize in a fun and creative way.  
Simply drag and drop your favorite pictures, files or  
notes to pin them on the Board. You can use it to  
create thumbnail shortcuts, reminders, to-do list  
and so on according to your personal style.  
To access this utility, click Start -> All Programs -  
> TOSHIBA -> TOSHIBA Bulletin Board.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-4  
TOSHIBA ReelTime This application is a graphical history/indexing tool  
that enables you to view recently accessed files in  
a fun and easy-to-use format. View and scroll  
through your history of opened or imported files via  
thumbnails in an intuitive user interface.  
To access this utility, click Start -> All Programs -  
> TOSHIBA -> TOSHIBA ReelTime.  
TOSHIBA Wireless  
LAN Indicator  
TOSHIBA Wireless LAN Indicator utility displays  
the system's Wireless LAN connection status on  
the logon screen.  
You can quickly check the current Wireless LAN  
connection status before logging into Windows.  
To change the settings of this utility, click Start->  
All Programs -> TOSHIBA -> Networking->  
Wireless Indicator -> Settings.  
TOSHIBA Media  
Controller  
This application allows you to control your music,  
pictures and videos by streaming content to any  
compatible device in your home.  
To access this utility, click Start -> All Programs -  
> TOSHIBA -> TOSHIBA Media Controller ->  
TOSHIBA Media Controller.  
For more information, please refer to the  
TOSHIBA Media Controller Help.  
TOSHIBA Speech  
System  
The TOSHIBA Speech System consists of a voice-  
composition application (text-to-speech) that  
analyzes documents and reads them aloud, and a  
speech-recognition application that recognizes the  
words you speak into a microphone. This allows  
you to control and operate various Windows  
programs by voice command rather than using the  
keyboard or a mouse.  
To access this utility, click Start -> All Programs -  
> TOSHIBA -> Speech System.  
For more information, please refer to the  
TOSHIBA Speech System Help.  
TOSHIBA  
The plug-in lets you upconverts wmv and mp4  
Resolution+ Plug-in videos on Windows Media Player.  
For Windows Media  
Player  
For more information, please refer to the  
TOSHIBA Resolution+ Plug-in for Windows Media  
Player Help.  
To access it, click Start -> All Programs ->  
TOSHIBA -> TOSHIBA Resolution+ Plug-in for  
Windows Media Player -> TOSHIBA  
Resolution+ Plug-in for Windows Media Player  
Help.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-5  
Special features  
The following features are either unique to TOSHIBA computers or are  
advanced features which make the computer more convenient to use.  
Access each function using the following procedures.  
*1 To access the Power Options, click Start -> Control Panel -> System  
and Security -> Power Options.  
Hot keys  
Hot keys are specific key combinations that let you  
quickly change the system configuration directly  
from the keyboard without running a system  
program.  
Display automatic  
power off*1  
This feature automatically cuts off power to the  
computer's display panel when there is no  
keyboard input for a specified time, with power  
being restored the next time a key is pressed. This  
can be specified in the Power Options.  
HDD automatic  
power off*1  
This feature automatically cuts off power to the  
hard disk drive when it is not accessed for a  
specified time, with power being restored when the  
hard disk drive is next accessed. This can be  
specified in the Power Options.  
System automatic  
Sleep/Hibernation  
Mode*1  
This feature automatically shuts down the system  
into either Sleep Mode or Hibernation Mode when  
there is no input or hardware access for a  
specified time. This can be specified in the Power  
Options.  
Power on password Two levels of password security, supervisor and  
user, are available to prevent unauthorized access  
to your computer.  
Instant security  
A specific hot key function automatically locks the  
system providing data security.  
Intelligent power  
supply*1  
A microprocessor in the computer's intelligent  
power supply detects the battery's charge,  
automatically calculates the remaining battery  
capacity and protects electronic components from  
abnormal conditions such as a voltage overload  
from the AC adaptor. This can be specified in the  
Power Options.  
Battery save mode *1  
Panel power on/off*1  
This feature lets you configure the computer in  
order to save battery power. This can be specified  
in the Power Options.  
This feature automatically turns power to the  
computer off when the display panel is closed, and  
turns it back on when the display panel is opened.  
This can be specified in the Power Options.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-6  
               
Low battery  
automatic  
Hibernation Mode*1  
When battery power is exhausted to the point that  
computer operation cannot be continued, the  
system automatically enters Hibernation Mode and  
shuts itself down. This can be specified in the  
Power Options.  
Heat dispersal*1  
To protect against overheating, the processor has  
an internal temperature sensor so that, if the  
computer's internal temperature rises to a certain  
level, the cooling fan is turned on or the processing  
speed is lowered. This can be specified in the  
Power Options.  
Hibernation Mode  
This feature lets you turn off the power to the  
computer without exiting from your software. The  
contents of main memory are automatically saved  
to the hard disk drive so that when you next turn  
the power on again, you can continue working right  
where you left off. Refer to the Turning off the  
power section in Chapter 1, Getting Started, for  
more details.  
Sleep Mode  
If you have to interrupt your work, you can use this  
feature to allow you to turn off power to the  
computer without exiting from your software. Data  
is maintained in the computer's main memory so  
that when you next turn on the power, you can  
continue working right where you left off.  
USB Wakeup  
function  
This function restores the computer from Sleep  
Mode depending on the external devices  
connected to the USB ports.  
For example, if a mouse or USB keyboard is  
connected to a USB port, clicking the mouse  
button or pressing the keyboard will wakeup the  
computer.  
Sleep and Charge  
function  
This feature allows you to charge USB-compatible  
external devices such as mobile phones or  
portable digital music players via the USB port  
when your computer is in Sleep Mode, Hibernation  
Mode or in the shutdown state.  
This function is worked by the TOSHIBA Sleep  
Utility.  
TOSHIBA PC Health The TOSHIBA PC Health Monitor application  
Monitor  
proactively monitors a number of system functions  
such as power consumption, battery health and  
system cooling, informing you of significant system  
conditions. This application recognizes the system  
and individual component serial numbers and will  
track specific activities related to their usage.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-7  
   
Using the TOSHIBA Sleep Utility  
This utility displays whether the Sleep and Charge function is enabled or  
disabled and shows the positions of USB ports that support the Sleep and  
Charge function. It also displays the remaining battery capacity.  
The TOSHIBA Sleep Utility is only supported by Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D models.  
Sleep and Charge  
Your computer can supply USB bus power (DC5V) to the USB port even  
when the power of the computer is turned OFF. "Power OFF" includes  
Sleep Mode, Hibernation Mode or shutdown state.  
This function can be used for ports that support the Sleep and Charge  
function (hereinafter called "compatible ports").  
Compatible ports are USB ports that have the ( ) symbol icon.  
You can use the Sleep and Charge function to charge certain USB-  
compatible external devices such as mobile phones or portable digital  
music players.  
However, the Sleep and Charge function may not work with certain external  
devices even if they are compliant with the USB specification. In those  
cases, turn the power of the computer ON to charge the device.  
When Sleep and Charge function is enabled, USB bus power (DC5V)  
will be supplied to compatible ports even when the power of the  
computer is turned OFF. USB bus power (DC5V) is similarly supplied to  
the external devices which are connected to the compatible ports.  
However, some external devices cannot be charged solely by supplying  
USB bus power (DC5V). As for the specifications of the external  
devices, please contact the device manufacturer or check the  
specifications of the external devices thoroughly before use.  
Using the sleep and charge function to charge external devices will take  
longer than charging the devices with their own chargers.  
If Sleep and Charge function is enabled, the computer’s battery will  
discharge during hibernation or when the computer is turned off. It is  
recommended that you connect the AC adaptor to the computer when  
enabling the Sleep and Charge function.  
External devices connected to the USB bus power (DC5V) function that  
interfaces with the power ON/OFF of the computer may always be in an  
operational state.  
When there is a current overflow of the external devices connected to  
the compatible ports, USB bus power (DC5V) supply may be stopped  
for safety reasons.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-8  
 
When Sleep and Charge function is enabled, the USB Wakeup function  
does not work for compatible ports. In that case, if there is a USB port  
that does not have the Sleep and Charge function-compatible icon ( ),  
attach the mouse or keyboard to it. If all USB ports have the Sleep and  
Charge function-compatible icon ( ), change to disable Sleep and  
Charge function. The USB Wakeup function will now work, but the  
Sleep and Charge function will be disabled.  
Metal paper clips or hair pins/clips will generate heat if they come into  
contact with USB ports. Do not allow USB ports to come into contact with  
metal products, for example when carrying the computer in your bag.  
Starting the TOSHIBA Sleep Utility  
To start the utility, click Start -> All Programs -> TOSHIBA -> Utilities ->  
Sleep Utility.  
Enabling Sleep and Charge  
This utility can be used to enable and disable the Sleep and Charge  
function.  
Select the Enable Sleep and Charge check box to enable this function for  
the compatible USB ports. The default state is disabled.  
Power supply mode settings  
Your PC has multiple charging modes so that many different USB devices  
can be supported for Sleep and Charge function. Auto Mode (Default) is  
suitable for a wide range of digital audio players.  
However, determining which mode is suitable for your USB device is  
unknown without trying. Try each mode, using the following procedure,  
from Auto Mode to Alternate Mode(*1) to find the suitable mode for your  
USB device to charge.  
This function may not be able to be used with some connected external  
devices even if the appropriate mode is selected. In this situation, clear the  
"Enable Sleep and Charge" check box and stop using this function.  
*1. Some computers may not support all modes.  
Battery Settings  
This utility can be used to specify the lower limit of remaining battery life for  
Sleep and Charge. Move the slider bar to specify the lower limit. If the  
remaining battery life falls below the setting, the Sleep and Charge function  
will be stopped.  
Using the TOSHIBA Face Recognition  
TOSHIBA Face Recognition uses a face verification library to verify the  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-9  
   
face data of users when they log in to Windows. The user can thus avoid  
having to enter a password or the like, which makes the login process  
easier.  
TOSHIBA Face Recognition does not guarantee the correct  
identification of a user. Changes to the likeness of a registrant, such as  
hair style changes, wearing a cap, or wearing glasses may effect the  
recognition rates when such changes occur after the registrant had  
registered.  
TOSHIBA Face Recognition may incorrectly recognize faces that are  
similar to a registrant.  
For high security purposes, TOSHIBA Face Recognition is not a  
suitable substitute for Windows passwords. When security is a high  
priority, use your established Windows passwords to log in.  
Bright background light and/or shadows may prevent a registrant from  
being recognized correctly. In that case, log in using your Windows  
password. If recognition of a registrant fails repeatedly, refer to your  
computer documentation to learn ways to improve recognition  
performance.  
TOSHIBA Face Recognition records face data in a log when face  
recognition fails. When transferring ownership or disposing of your  
computer, please uninstall the application or delete all the logs created  
by the application. For details on how to do this, see help file.  
TOSHIBA Face Recognition can be used only in Windows Vista and  
Windows 7.  
Disclaimer  
TOSHIBA does not guarantee that the face recognition utility technology  
will be completely secure or error-free. TOSHIBA does not guarantee that  
the face recognition utility will accurately screen out unauthorized users at  
all times. TOSHIBA is not liable for any failure or damage that might arise  
out of the use of the face recognition software or utility.  
TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO  
RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS,  
PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE  
STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE  
OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY  
THEREOF.  
How to register the Face Recognition Data  
Take a picture for facial verification purposes, and register the data needed  
when you log in. To register the data needed when you log in, follow the  
steps as described below:  
1. To launch this utility, click Start -> All Programs -> TOSHIBA ->  
Utilities -> Face Recognition.  
The Registration screen is displayed for a logged-in user whose face  
has not been registered.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-10  
The Management screen is displayed for a logged-in user whose face  
has already been registered.  
2. Click Run as administrator in lower left of the Management screen,  
and then click the Register button. The Registration screen is  
displayed.  
If you wish to practice, click on the Next button in the Registration  
screen.  
If you do not wish to practice, click on the Skip button in the  
Registration screen.  
3. Click the Next button to start the guide. Please follow the guide to  
practice  
Click the Back button to practice the guide once more.  
4. Click the Next button to start image-capturing process.  
Adjust the position of your face so that it fits within the face-shaped  
frame.  
5. Once your face has been positioned properly, the recording will  
commence.  
Start moving your neck very slightly to the left and right, and then move  
your neck up and down.  
6. Registration will end after you have repeatedly moved your neck left,  
right, up and down.  
When the register succeeds, below message will be displayed on the  
screen:  
"Registration successful. Now we’ll do the verification test. Click  
the Next button."  
Click the Next button to perform the verification test.  
7. Perform the verification test. Face the screen as you do when you  
register.  
If verification fails, click the Back button and re-register. Please refer to  
step 6 from step 4.  
8. If verification is successful, click the Next button and register an  
account.  
9. Register the account. Fill in all the fields.  
10. The Management screen is displayed. The registered account name  
will be displayed. Clicking on it will cause the captured image of your  
face to be displayed on the left.  
How to Delete the Face Recognition Data  
Delete image data, account information, and personal record data created  
during registration. To delete the Face Recognition Data, follow the steps  
as described below:  
1. To launch this utility, click Start -> All Programs -> TOSHIBA ->  
Utilities -> Face Recognition. The Management screen is displayed.  
2. Select a user which is displayed in the Management screen.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-11  
3. Click the Delete button. "You are about to delete the user data. Would  
you like to continue?" will be displayed on the screen.  
If you do not want the data to be deleted, click the No button and you  
will then be returned to the Management screen.  
Clicking on the Yes button will remove the selected user from the  
Management screen.  
How to launch the help file  
For further information on this utility, please refer to help file.  
1. To launch the help file, click the Help button in the Management  
screen.  
Windows Logon via TOSHIBA Face Recognition  
This section explains how to login to Windows with TOSHIBA Face  
Recognition. Two authentication modes are provided.  
1:N Mode Login screen: If the face authentication tile is selected by  
default, you can log in without using the keyboard or mouse.  
1:1 Mode Login screen: This mode is essentially the same as AUTO  
mode, but the Select Account screen will appear before the Display  
Captured Image screen, and you will need to select the user account to  
be authenticated in order to start the authentication process.  
1:N Mode Login screen  
1. Turn on the computer.  
2. The Select Tiles screen will be displayed.  
3. Select Start face recognition ( ).  
4. "Please face the camera" will be displayed.  
5. Verification will be performed. If the authentication is successful, the  
image data taken in step 4 will be faded in and placed over one another.  
If an error occurs during authentication, you will be returned to the  
Select Tiles screen.  
6. The Windows Welcome screen will be displayed, and will be logged in  
automatically to Windows.  
1:1 Mode Login screen  
1. Turn on the computer.  
2. The Select Tiles screen will be displayed.  
3. Select Start face recognition ( ).  
4. The Select Account screen will be displayed.  
5. Select the account, and click the arrow button.  
6. "Please face the camera" will be displayed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-12  
7. Verification will be performed. If the authentication is successful, the  
image data taken in step 6 will be faded in and placed over one another.  
If an error occurs during authentication, you will be returned to the  
Select Tiles screen.  
8. The Windows Welcome screen will be displayed, and will be logged in  
automatically to Windows.  
If authentication was successful, but an authentication error  
subsequently occurred during the login to Windows, you will be asked  
to provide your account information.  
Password Utility  
The password Utility allows you to maintain an additional level of security  
and provides two levels of password security: User and Supervisor.  
Passwords set by the TOSHIBA Password Utility function are different from  
the Windows password.  
User Password  
To start the utility, point to or click the following items:  
Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist ->  
SECURE -> User password  
Registered  
Click to register a password of up to 10 characters. After a password is  
set, you will be prompted to enter it when you start the computer.  
Not Registered  
Click to delete a registered password. Before you can delete a  
password, you must first enter the current password correctly.  
Owner String (text box)  
You can use this box to associate text with the password. After you  
enter text, click Apply or OK. When the computer is started, this text  
will be displayed together with the prompt asking you to enter a  
password.  
Supervisor Password  
If you set a Supervisor Password, some functions might be restricted when  
a user logs on with the User Password. To set a Supervisor Password, click  
Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist ->  
SECURE -> Supervisor password.  
This utility lets you do the following:  
Register or delete the Supervisor Password.  
Specify restrictions for general users.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-13  
     
Starting the computer by password  
To start up the computer with the user password, follow the steps as  
detailed below:  
1. Turn on the power as described in Chapter 1, Getting Started. The  
following message will appear in the screen:  
Enter Password [ ]  
At this point, the hotkeys FN + F1 to F9 do not work. They will function after  
you enter the password.  
2. Enter the Password.  
3. Press ENTER.  
If you enter the password incorrectly three times in a row, the computer  
shuts off. In this case, you must turn the computer back on to retry  
password entry.  
HW Setup  
This section explains how to use the TOSHIBA HW Setup program to  
configure your computer, and provides information on settings for various  
functions.  
Accessing HW Setup  
To run the HW Setup program, click Start -> All Programs -> TOSHIBA ->  
Utilities -> HWSETUP.  
HW Setup window  
The HW Setup window contains a number of tabs (General, Password,  
Display, Boot Setting, Keyboard, LAN, SATA and USB) to allow specific  
functions of the computer to be configured.  
In addition there are also three buttons: OK, Cancel and Apply.  
OK  
Accepts your changes and closes the HW Setup  
window.  
Cancel  
Apply  
Closes the window without accepting your  
changes.  
Accepts all your changes without closing the HW  
Setup window.  
General  
This window displays the BIOS/EC version and contains two buttons:  
Default and About.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-14  
         
Default  
About  
Return all HW Setup values to the factory settings.  
Display the HW Setup version.  
Setup  
This field displays the installed BIOS version, date and EC version.  
Password  
This option allows you to set or reset the user password for power on.  
User Password  
Lets you register a new password or change/remove an existing password.  
Not Registered  
Registered  
Changes or removes the password. (Default)  
Selects the password. A dialogue box will appear  
to allow you to set the password.  
To enter a user password:  
1. Select Registered to display the following prompt:  
Enter Password:  
Enter a password of up to 10 characters. The character string you enter  
is displayed as a string of asterisk.  
2. Click OK. The following message appears, allowing you to verify the  
password.  
Verify Password:  
3. If character strings match, the password is registered. Click OK. If they  
do not match, the following message appears. You must repeat from  
step 1.  
Entry Error!!!  
To delete a user password:  
1. Select Not Registered to display the following prompt:  
Enter Password:  
2. Enter the currently registered password. The character string you enter  
is displayed as a string of asterisks.  
3. Click OK. If the character string you enter matches the registered  
password, the password option is reset and the display changes to:  
Not Registered  
If they do not match, the following message appears. You must repeat  
from step 1.  
Incorrect Password.  
Owner String  
This blank field is used to display a message when the password field is  
displayed on startup. If a password is not registered the message will not  
be shown.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-15  
Display  
This tab lets you customize your computer’s display settings for either the  
internal display or an external monitor.  
Power On Display  
This tab allows you to select the display to be used when the computer is  
started. Please note that this setting is only available on standard VGA  
mode and is not available as part of the Windows Desktop properties.  
The Power On Display is supported with some models.  
Auto-Selected  
Selects an external monitor if one is connected,  
otherwise, it selects the internal display. (Default)  
System LCD Only  
Selects the internal LCD, even if an external  
monitor is connected.  
Boot Setting  
This function allows you to modify the boot settings.  
Boot Priority Options  
This tab allows you to set the priority for booting the computer. The Boot  
Priority Options setting window will be displayed. Click the up and down  
arrow buttons to adjust the priority.  
To change the boot drive, follow the steps below.  
1. Hold down F12 and boot the computer. when the TOSHIBA Leading  
Innovation >>> screen appears, release the F12 key.  
2. Use the up and down cursor keys to select the boot device you want  
and press ENTER.  
If a Supervisor Password has been set, manual boot device selection  
functions may be restricted.  
The boot device selection methods described above will not change the  
boot priority settings that have been configured in HW Setup. In addition, if  
you press a key other than one of those listed, or if the selected device is  
not installed, the system will continue to boot according to the current and  
available settings in HW Setup.  
Boot Speed  
This option allows you to set the system boot-up speed.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-16  
       
Fast  
Reduce system boot-up time. System can boot  
only from the built-in HDD and only internal LCD  
and keyboard are supported during the boot  
process.  
Normal  
System boots up at normal speed. (Default)  
Panel Open - Power On  
This feature allows you to change the Panel Open - Power On setting.  
Enabled  
Enables the Panel Open - Power On function.  
When you open the display panel while your  
computer is turned off, the system will boot up  
automatically.  
Disabled  
Disables the Panel Open - Power On function  
(Default).  
The Panel Open - Power On feature is supported with some models.  
Keyboard  
Wake-up on Keyboard  
When this feature is enabled, and the computer is in Sleep Mode, you can  
turn on the system by pressing any key. However, please be aware that this  
option will only work with the internal keyboard and only when the computer  
is in Sleep Mode.  
Enabled  
Disabled  
Enables the Wake-up on Keyboard function.  
Disables the Wake-up on Keyboard function.  
(Default)  
LAN  
Wake-up on LAN  
This feature lets the computer's power be turned on from shutdown when it  
receives a wake-up packet (Magic packet) from the LAN.  
Do not install or remove a memory module while Wake-up on LAN is  
enabled.  
The Wake-up on LAN function consumes power even when the system  
is off. Leave the AC adaptor connected while using this feature.  
Regarding Wake-up on LAN from sleep or hibernation, you must check  
the "Allow the device to wake the computer" check box within the LAN  
Device properties. (This feature does not effect the Wake-up on LAN  
from sleep or hibernation.)  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-17  
   
Power will be automatically turned on when a signal is received from an  
administrator's computer which is connected via a network.  
The following settings can be changed when the Built-in LAN is Enabled.  
Connect the AC adaptor when using the Wake-up on LAN function. The  
battery retention time will be shorter than the times listed in this manual  
when this function is enabled. Refer to the Batteries exhausted time section  
in chapter 5, Power and Power-Up Modes.  
Enabled  
Disabled  
Enables Wake-up on LAN from shutdown.  
Disables Wake-up on LAN from shutdown.  
(Default)  
Built-in LAN  
This feature enables or disables the Built-in LAN.  
Enabled  
Disabled  
Enables Built-in LAN functions. (Default)  
Disables Built-in LAN functions.  
USB  
Legacy USB Support  
Use this option to enable or disable USB Legacy Emulation. If your  
operating system does not support USB, you can still use a USB mouse  
and keyboard by setting the Legacy USB Support item to enabled.  
Enabled  
Disabled  
Enables the USB Legacy Emulation. (Default)  
Disables the USB Legacy Emulation.  
SATA  
This feature allows you to set conditions for SATA.  
SATA Interface setting  
This feature allows you to set SATA interface setting.  
Performance  
Battery life  
Let HDD work with maximum performance.  
(Default)  
Let HDD work with battery life mode. If this setting  
is selected, this caused performance down.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-18  
   
TOSHIBA PC Health Monitor  
The TOSHIBA PC Health Monitor application proactively monitors a  
number of system functions such as power consumption, battery health  
and the system cooling, informing you of significant system conditions. This  
application recognizes the system and individual component serial  
numbers, and will track specific activities related to the computer and their  
usage.  
The collected information includes device operation time and number of  
actuations or status changes (i.e.: number of power button and FN key  
combination uses, AC adaptor, battery, LCD, fan, HDD, sound volume,  
wireless communication switch, TOSHIBA Express Port Replicator and  
USB information), date of initial system use, and also computer and device  
usage (i.e.: power settings, battery temperature and recharging, CPU,  
memory, backlight illumination time, and temperatures for various devices).  
The stored data uses a very small portion of the total hard disk capacity,  
approximately 10MB or less per year.  
This information is used to identify and provide a notification of system  
conditions which may effect the performance of your TOSHIBA computer. It  
may also be used to help diagnose problems should the computer require  
service by TOSHIBA or TOSHIBA's authorized service providers.  
Additionally, TOSHIBA may also use this information for quality assurance  
analysis.  
Subject to the use restrictions above, the HDD data logged may be  
transferred to entities located outside of your country or region of residence  
(e.g., European Union). Those countries may or may not have the same  
data protection laws or data protection levels as required by your home  
country or region.  
Once enabled, you may disable the TOSHIBA PC Health Monitor at any  
time by uninstalling the software via Uninstall a program in the Control  
Panel. Doing so will automatically delete all collected information from the  
HDD.  
The TOSHIBA PC Health Monitor software does not extend or modify  
TOSHIBA's obligations under its standard limited warranty in any way.  
TOSHIBA's standard limited warranty terms and limitations apply.  
Starting the TOSHIBA PC Health Monitor  
The TOSHIBA PC Health Monitor can be started using the following  
methods:  
Click Start -> All Programs -> TOSHIBA -> Utilities -> PC Health  
Monitor.  
Click the icon (  
) in the notification area, then click the "Enable PC  
Health Monitor..." message the first time you run the application and  
"Run PC Health Monitor..." every time thereafter.  
No matter which method is used, the TOSHIBA PC Health Monitor  
explanation screen will be displayed.  
Clicking Next will display the PC Health Monitor Software Notice &  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-19  
 
Acceptance screen. Please carefully read the information displayed.  
Selecting ACCEPT and clicking OK will enable the program. By enabling  
the TOSHIBA PC Health Monitor software, you agree with these terms and  
conditions and to the use and sharing of the collected information. Once  
the program is enabled, the TOSHIBA PC Health Monitor screen is  
displayed, and the program will begin monitoring system functions and  
collecting information.  
If a TOSHIBA PC Health Monitor message is displayed.  
A message will be displayed if any changes which may interfere with the  
operation of the program are detected. Follow the instructions displayed on  
screen in the message.  
System Recovery  
There is a hidden partition allocated on the hard disk drive for the System  
Recovery Options in the event of a problem.  
You can also create recovery media and restore the system.  
The following items will be described in this section:  
System Recovery Options  
Create Recovery Media  
Restoring the pre-installed software from your created Recovery Media  
Restoring the pre-installed software from the Recovery hard disk drive  
System Recovery Options  
The System Recovery Options feature is installed on the hard disk when  
shipped from the factory. The System Recovery Options menu includes  
tools to repair startup problems, run diagnostics or restore the system.  
See the Windows Help and Support content for more information about  
Startup Repair.  
The System Recovery Options can also be run manually to repair  
problems.  
The procedure is as follows. Follow the instructions shown on the on-  
screen menu.  
1. Turn off the computer.  
2. While holding the F8 key, turn on the computer.  
3. The Advanced Boot Options menu will be displayed. Use the arrow  
keys to select Repair Your Computer and press ENTER.  
4. Follow the on-screen instructions.  
Check your Windows® manual for more information on backing up your  
system (including the system image backup feature).  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-20  
 
Creating Recovery Media  
This section describes how to create Recovery Media.  
Be sure to connect the AC adaptor when you create Recovery Media.  
Be sure to close all other software programs except the Recovery  
Media Creator.  
Do not run software such as screen savers which can put a heavy load  
on the CPU.  
Operate the computer at full power.  
Do not use power-saving features.  
Do not write to the media when the virus check software is running.  
Wait for it to finish, then disable virus detection programs including any  
software that checks files automatically in the background.  
Do not use utilities, including those intended to enhance hard disk drive  
access speed. They may cause unstable operation and damage data.  
Do not shut down/log off or Sleep/Hibernate while writing or rewriting  
the media.  
Set the computer on a level surface and avoid places subjected to  
vibrations such as airplanes, trains, or cars.  
Do not use on an unstable surface such as a stand.  
A recovery image of the software on your computer is stored on the hard  
disk drive, and can be copied to either DVD or USB Flash Memory by using  
the following steps:  
1. Select either blank DVD or USB Flash Memory.  
The application will allow you to choose from a variety of different media  
onto which the recovery image can be copied including DVD-R, DVD-R  
DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW and USB Flash Memory.  
Please note that some of the above media may not be compatible with  
the external optical disc drive connected to your computer. You should  
therefore verify the external optical disc drive supports the blank media  
you have chosen before proceeding.  
USB Flash Memory will be formatted and all the data in the USB Flash  
Memory will be lost when proceeding.  
2. Turn on your computer and allow it to load the Windows 7 operating  
system from the hard disk drive as normal.  
3. Insert the first blank disc into the external optical disc drive tray, or  
Insert the USB Flash Memory into one available USB port.  
4. Double click the Recovery Media Creator icon on the Windows 7  
desktop, or select the application from Start Menu.  
5. After Recovery Media Creator starts, select the type of media and the  
title you wish to copy, and then click the Create button.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-21  
Restoring the pre-installed software from your created Recovery  
Media  
If the pre-installed files are damaged, you are able to either use the  
Recovery Media you have created or the hard disk drive recovery process  
to restore the computer to the state it was in when you originally received it.  
To perform this restoration, follow the steps below:  
When the sound mute feature has been activated by pressing the FN +  
ESC key, be sure to disable this to allow sounds to be heard before starting  
the restore process. Please refer to The Keyboard in Chapter 3, Operating  
Basics, for further details.  
You can not use System Recovery Options if restoring the pre-installed  
software without System Recovery Options.  
When you reinstall the Windows operating system, the hard disk will be  
reformatted and all data will be lost.  
1. Load the Recovery Media into the optical disc drive or insert the  
recovery USB Flash Memory into one available USB port.  
2. Turn off the computer's power.  
3. While holding down F12 key on the keyboard, turn on your computer -  
when the TOSHIBA Leading Innovation >>> logo screen appears,  
release the F12 key.  
4. Use the up and down cursor key to select the appropriate option from  
the menu according to your actual recovery media. Please refer to the  
Boot Setting section for further information.  
5. A menu will be displayed from which you should follow the on-screen  
instructions.  
When drivers/utilities are installed, you can setup the respective  
drivers/utilities from the following place. To open the setup files, Click Start  
-> All Programs -> TOSHIBA -> Applications and Drivers.  
If you have previously chosen to remove the recovery partition and are  
trying to create "Recovery Media", you will see the following message:  
"The Recovery Media Creator can not be launched because there is no  
recovery partition."  
When there is no recovery partition, the Recovery Media Creator cannot  
make Recovery Media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-22  
 
However, if you have already created a "Recovery Media", you can use it to  
restore the recovery partition.  
If you have not created "Recovery Media", please contact TOSHIBA  
support for assistance.  
Restoring the pre-installed software from the Recovery hard disk  
drive  
A portion of the total hard disk drive space is configured as a hidden  
recovery partition. This partition stores files which can be used to restore  
pre-installed software in the event of a problem.  
If you subsequently set up your hard disk drive again, do not change,  
delete or add partitions in a manner other than specified in the manual,  
otherwise you may find that space for the required software is not available.  
In addition, if you use a third-party partitioning program to reconfigure the  
partitions on your hard disk drive, you may find that it becomes impossible  
to setup your computer.  
When the sound mute feature has been activated by pressing the FN +  
ESC key, be sure to disable this to allow sounds to be heard before starting  
the restore process. Please refer to The Keyboard in Chapter 3, Operating  
Basics, for further details.  
You can not use System Recovery Options if restoring the pre-installed  
software without System Recovery Options.  
When you reinstall the Windows operating system, the hard disk will be  
reformatted and all data will be lost.  
1. Turn off your computer.  
2. While holding down 0 (zero) key on the keyboard, turn on your  
computer.  
3. A menu will be displayed from which you should follow the on-screen  
instructions.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-23  
 
Chapter 5  
P
5
r
e
t
p
a
h
C
ower and Power-Up Modes  
The computer's power resources include the AC adaptor, battery pack and  
any internal batteries. This chapter provides details on making the most  
effective use of these resources, and includes information on charging and  
changing batteries, tips for saving battery power, and information on the  
different power-up modes.  
Power conditions for Satellite  
C670/C675/C670D/C675D/Satellite Pro C670/C675/C670D  
The computer's operating capability and battery charge status are affected  
by different power conditions, including whether an AC adaptor is  
connected, whether a battery pack is installed and what the charge level is  
for that battery.  
The LED in the table below refers to the DC IN/Battery indicator.  
Power on  
Power off  
(no operation)  
AC adaptor Battery fully  
connected charged  
• Operates  
• No charge  
• LED: green  
• No charge  
• LED: green  
Battery partially  
charged  
• Operates  
• Charge  
• Quick charge  
• LED: amber  
• LED: amber  
No battery  
installed  
• Operates  
• No charge  
• LED: off  
• No charge  
• LED: off  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-1  
       
Power on  
Power off  
(no operation)  
AC adaptor Remaining  
• Operates  
battery capacity is  
• LED: off  
not  
connected above low battery  
trigger point  
Remaining  
• Operates  
battery capacity is  
below low battery  
trigger point  
• LED: blink amber  
Remaining  
Computer shuts down  
battery capacity is  
exhausted  
No battery  
installed  
• No operation  
• LED: off  
Power conditions for Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D  
The computer's operating capability and battery charge status are affected  
by different power conditions, including whether an AC adaptor is  
connected, whether a battery pack is installed and what the charge level is  
for that battery.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-2  
 
Power on  
Power off  
(no operation)  
AC adaptor Battery fully  
• Operates  
• No charge  
• LED:  
• No charge  
• LED:  
connected  
charged  
Battery white  
DC IN white  
Battery white  
DC IN white  
Battery partially  
charged or no  
charge  
• Operates  
• Charge  
• Quick charge  
• LED:  
• LED:  
Battery amber  
DC IN white  
Battery amber  
DC IN white  
No battery  
installed  
• Operates  
• No charge  
• LED:  
• No charge  
• LED:  
Battery off  
DC IN white  
Battery off  
DC IN white  
AC adaptor Remaining  
• Operates  
• LED:  
not  
connected  
battery capacity is  
above low battery  
Battery amber  
DC IN off  
trigger point  
Remaining  
• Operates  
• LED:  
battery capacity is  
below low battery  
trigger point  
Battery  
blink amber  
DC IN off  
Remaining  
Computer shuts  
battery capacity is down  
exhausted  
No battery  
installed  
• No operation  
• LED:  
Battery off  
DC IN off  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-3  
Monitoring of power condition for Satellite  
C670/C675/C670D/C675D/Satellite Pro C670/C675/C670D  
As shown in the below table, the DC IN/Battery and Power indicators on  
the system indicator panel alert you to the computer’s operating capability  
and battery charge status.  
DC IN/Battery indicator  
Check the DC IN/Battery indicator to determine the status of the battery  
pack and power with the AC adaptor connected. The following indicator  
conditions should be noted:  
Blinking amber  
The battery charge is low, the AC adaptor must be  
connected in order to recharge the battery. It may  
also indicate a problem with the power supply. You  
should initially try plugging the AC adaptor into  
another power outlet - if it still does not operate  
properly, you should contact your reseller or  
dealer.  
Amber  
Green  
Indicates the AC adaptor is connected and the  
battery is charging.  
Indicates the AC adaptor is connected and the  
battery is fully charged.  
No light  
Under any other conditions, the indicator does not  
light.  
If the battery pack becomes too hot while it is being charged, the charge  
will stop and the DC IN/Battery indicator will go out. When the battery  
pack's temperature falls to a normal range, charging will resume - this  
process will occur regardless of whether the computer's power is on or off.  
Power indicator  
Check the Power indicator to determine the power status of the computer -  
the following indicator conditions should be noted:  
Green  
Indicates power is being supplied to the computer  
and the computer is turned on.  
Blinking green  
Indicates that the computer is in Sleep Mode and  
that there is sufficient power available (AC adaptor  
or battery) to maintain this condition. In Sleep  
Mode, this indicator will turn on for one second and  
off for two seconds.  
No light  
Under any other conditions, the indicator does not  
light.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-4  
 
Monitoring of power condition for Satellite  
L770/L775/L770D/L775D/satellite Pro L770/L775/L770D/L775D  
As shown in the below table, the Battery, DC IN and Power indicators on  
the system indicator alert you to the computer’s operating capability and  
battery charge status.  
Battery indicator  
Check the Battery indicator to determine the status of the battery pack.  
The following indicator lights indicate the battery status:  
Blinking amber  
Amber  
The battery charge is low, the AC adaptor must be  
connected in order to recharge the battery.  
Indicates the AC adaptor is connected and the  
battery is charging.  
White  
Indicates the AC adaptor is connected and the  
battery is fully charged.  
No light  
Under any other conditions, the indicator does not  
light.  
If the battery pack becomes too hot while it is being charged, the charge  
will stop and the Battery indicator will go out. When the battery pack's  
temperature falls to a normal range, charging will resume - this process will  
occur regardless of whether the computer's power is on or off.  
DC IN indicator  
Check the DC IN indicator to determine the power status with the AC  
adaptor connected - the following indicator conditions should be noted:  
White  
Indicates the AC adaptor is connected and is  
correctly supplying power to the computer.  
No light  
Under any other conditions, the indicator does not  
light.  
Power indicator  
Check the Power indicator to determine the power status of the computer -  
the following indicator conditions should be noted:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-5  
     
White  
Indicates power is being supplied to the computer  
and the computer is turned on.  
Blinking amber  
Indicates that the computer is in Sleep Mode and  
that there is sufficient power available (AC adaptor  
or battery) to maintain this condition. In Sleep  
Mode, this indicator will turn on for one second and  
off for two seconds.  
No light  
Under any other conditions, the indicator does not  
light.  
Battery  
This section explains battery types, use, recharging methods and handling.  
Battery types  
The computer has different types of batteries.  
Battery pack  
When the AC adaptor is not connected, the computer's main power source  
is a removable lithium ion battery pack, also referred to in this manual as  
the main battery. You can purchase additional battery packs for extended  
use of the computer away from an AC power source although you should  
not change the battery pack while the AC adaptor is connected.  
Before you remove the battery pack, save your data and shut down the  
computer, or place the computer into Hibernation Mode. Please be aware  
that, when placing the computer into Hibernation Mode, the contents of  
memory will be saved to the hard disk drive, although for safety sake, it is  
best to also save your data manually.  
Real Time Clock (RTC) battery  
The Real Time Clock (RTC) battery provides power for the internal real  
time clock and calendar function and also maintains the system  
configuration while the computer is turned off. If the RTC battery becomes  
completely discharged, the system will lose this information and the real  
time clock and calendar will stop working - in this instance the following  
message will be displayed when you turn on the power:  
S
**** RTC Power Failure ****  
Check system. Then press [F2] key.  
You can change the Real Time Clock settings by turning on the computer  
while pressing the F2 key and then release F2 key when the TOSHIBA  
Leading Innovation >>> screen appears. Please refer to Chapter 6  
Troubleshooting for further information.  
User’s Manual  
5-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Care and use of the battery pack  
This section provides the important safety precautions in order to handle  
your battery pack properly.  
Refer to the enclosed Instruction Manual for Safety and Comfort for  
detailed precautions and handling instructions.  
Make sure the battery is securely installed in the computer before  
attempting to charge the battery pack. Improper installation could  
generate smoke or fire, or cause the battery pack to rupture.  
Keep the battery pack out of reach of infants and children. It can cause  
injury.  
The lithium ion battery pack can explode if not replaced, used, handled  
or disposed of properly. Dispose of the battery as required by local  
ordinances or regulations. Use only batteries recommended by  
TOSHIBA as replacements.  
The computer's RTC battery is a lithium battery and should be replaced  
only by your dealer or by a TOSHIBA service representative. The  
battery can explode if not properly replaced, used, handled or disposed.  
Dispose of the battery as required by local ordinances or regulations.  
Charge the battery pack only in an ambient temperature between 5 and  
35 degrees Celsius. Otherwise, the electrolyte solution might leak,  
battery pack performance might deteriorate and the battery life might be  
shortened.  
Never install or remove the battery pack without first turning off the  
power and disconnecting the AC adaptor. Never remove the battery  
pack while the computer is in Sleep Mode. Data could be lost.  
Never remove the battery pack while the Wake-up on LAN function is  
enabled. Data will be lost. Before you remove a battery pack, disable the  
Wake-up on LAN function.  
Charging the batteries  
When the power in the battery pack becomes low, the DC IN/Battery or  
Battery indicator will blink amber to indicate that only a few minutes of  
battery power remain. If you continue to use the computer while the DC  
IN/Battery or Battery indicator blinks, the computer will enable Hibernation  
Mode so that you do not lose any data, and automatically turn itself off.  
You must recharge a battery pack when it becomes discharged.  
Procedures  
To recharge a battery pack while it is installed in the computer, connect the  
AC adaptor to the DC IN 19V jack and plug the other end into a working  
outlet - the DC IN/Battery or Battery indicator will glow amber while the  
battery is being charged.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-7  
Use only the computer connected to an AC power source or optional  
TOSHIBA Battery charger to charge the battery pack. Never attempt to  
charge the battery pack with any other charger.  
Time  
Refer to User Information Guide about Charging time.  
Battery charging notice  
The battery may not begin charging immediately under the following  
conditions:  
The battery is extremely hot or cold (if the battery is extremely hot, it  
might not charge at all). To ensure the battery charges to its full  
capacity, you should charge it at room temperature of between 5°C to  
35°C (41°F to 95°F).  
The battery is nearly completely discharged. In this instance you should  
leave the AC adaptor connected for a few minutes and the battery  
should begin charging.  
The DC IN/Battery or Battery indicator may show a rapid decrease in  
battery operating time when you try to charge a battery under the following  
conditions:  
The battery has not been used for a long time.  
The battery has completely discharged and been left in the computer for  
a long time.  
A cool battery is installed in a warm computer.  
In such cases you should follow the steps as detailed below:  
1. Fully discharge the battery by leaving it in the computer with the power  
on until the system automatically turns itself off.  
2. Connect the AC adaptor to the DC IN 19V jack of the computer, and to  
a wall outlet that is supplying power.  
3. Charge the battery until the DC IN/Battery indicator glows green or  
Battery indicator glows white.  
Repeat these steps two or three times until the battery recovers normal  
capacity.  
Monitoring battery capacity  
Remaining battery power can be monitored using the following methods.  
Clicking the battery icon on the Taskbar  
Via the Battery Status in the Windows Mobility Center window  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-8  
 
You should wait at least 16 seconds after turning on the computer  
before trying to monitor the remaining operating time. This is because  
the computer needs this time to check the battery's remaining capacity  
and then calculate the remaining operating time, based on this together  
with the current power consumption.  
Please be aware that the actual remaining operating time may differ  
slightly from the calculated time.  
With repeated discharges and recharges, the battery's capacity will  
gradually decrease. In view of this it will be noted that an often used,  
older battery will not operate for as long as a new battery even when  
both are fully charged.  
Maximizing battery operating time  
A battery's usefulness depends on how long it can supply power on a  
single charge, while how long the charge lasts in a battery depends on:  
Processor speed  
Screen brightness  
System Sleep Mode  
System Hibernation Mode  
Display power off period  
Hard disk drive power off period  
How often and for how long you use the hard disk drive and external  
disk(c) drives, for example, optical disc drive.  
How much charge the battery contained to begin with.  
How you use optional devices, such as a USB device, to which the  
battery supplies power.  
Whether you enable Sleep Mode, which can conserve battery power if  
you are frequently turning the computer off and on.  
Where you store your programs and data.  
Whether you close the display panel when you are not using the  
keyboard - closing the display saves power.  
The environmental temperature - operating time decreases at low  
temperatures.  
The condition of the battery terminals - you should always ensure the  
terminals stay clean by wiping them with a clean dry cloth before  
installing the battery pack.  
Batteries exhausted time  
Refer to User Information Guide about Retaining time.  
Extending battery life  
To maximize the life of your battery packs:  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-9  
 
At least once a month, disconnect the computer from a power source  
and operate it on battery power until the battery pack fully discharges.  
Before doing so, follow the steps as detailed below.  
1. Turn off the computer's power.  
2. Disconnect the AC adaptor and turn on the computer's power - if it  
does not turn on then go to Step 4.  
3. Operate the computer on battery power for five minutes. If you find  
that the battery pack has at least five minutes of operating time,  
continue operating until the battery pack is fully discharged, however, if  
the DC IN/Battery or Battery indicator blinks or there is some other  
warning to indicate a low battery condition, go to Step 4.  
4. Connect the AC adaptor to the DC IN 19V jack of the computer, and  
to a wall outlet that is supplying power. The DC IN indicator should  
glow white and the Battery indicator should glow amber (or DC  
IN/Battery indicator should glow amber) to indicate that the battery  
pack is being charged, however, in the event that DC IN indicator or  
DC IN/Battery indicator does not glow this indicates that power is not  
being supplied - check the connections for the AC adaptor and the  
power cord.  
5. Charge the battery pack until the Battery indicator glows white or  
DC IN/Battery indicator glows green.  
If you have extra battery packs, rotate their use.  
If you will not be using the system for an extended period, for example  
for more than one month, remove the battery pack from the computer.  
Store spare battery packs in a cool dry place out of direct sunlight.  
Replacing the battery pack  
Please be aware that the battery pack is classified as a consumable item.  
The operating life of the battery pack will gradually reduce through  
repeated charging and discharging, and will need to be replaced when it  
reaches the end of its operating life. In addition to this, you might also  
replace a discharged battery pack with a charged spare when you are  
operating your computer away from an AC power source for an extended  
period of time.  
This section explains how to remove and install the battery pack, and  
begins with the removal process which is detailed through the following  
steps.  
Do not remove the battery pack while the computer is in Sleep Mode.  
Data is stored in RAM, so if the computer loses power it could be lost.  
In Hibernation Mode, data will be lost if you remove the battery pack or  
disconnect the AC adaptor before the save is completed. Wait for the  
Hard Disk Drive/Optical Disk Drive indicator to go out.  
Do not touch the battery release latch while holding the computer or the  
battery pack might fall out due to the unintentional release of the battery  
release latch and cause injuries.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-10  
 
Removing the battery pack  
To remove a discharged battery, follow the steps as detailed below:  
1. Save your work.  
2. Turn the computer's power off - ensure that the Power indicator is off.  
3. Remove all cables and peripherals that are connected to the computer.  
4. Close the display panel and turn the computer upside down.  
5. Slide the battery lock (1) into its unlock ( ) position.  
6. Slide and hold the battery release latch (2) to disengage the battery  
pack and then remove it from the computer.  
Figure 5-1 Releasing the battery pack (Satellite L770/L775/L770D/L775D/satellite  
Pro L770/L775/L770D/L775D)  
1
2
3
3
1
2
1. Battery lock  
3. Battery pack  
2. Battery release latch  
Installing the battery pack  
To install a battery pack, follow the steps as detailed below:  
Do not touch the battery release latch while holding the computer or the  
battery pack might fall out due to the unintentional release of the battery  
release latch and cause injuries.  
1. Insert the battery pack as far as it will go into the computer.  
2. Ensure that the battery pack is securely in place and the battery lock is  
in its lock position.  
3. Turn your computer over.  
Power-up modes  
The computer has three different power-up modes as follows:  
Shut Down Mode: The computer will shut down without saving data - in  
view of this you must always save your work before you turn the  
computer off.  
Hibernation Mode: Data in memory will be saved to the hard disk drive.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-11  
 
Sleep Mode: Data will be maintained in the computer's memory.  
Please refer to the sections Turning on the power and Turning off the power  
in Chapter 1, Getting Started for further information.  
Windows utilities  
You can configure various settings associated with both Sleep Mode and  
Hibernation Mode within the Power Options (to access it, Start -> Control  
Panel -> System and Security -> Power Options).  
Hot keys  
You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter  
Hibernation Mode.  
Panel power on/off  
You can set up your computer so that power is turned off automatically  
when you close the display panel, and turned on again when you open it.  
Please note that this function is only available for Sleep Mode or  
Hibernation Mode, not for Shut Down Mode.  
If the panel power off function is enabled, and you manually shut down  
Windows, do not close the display panel until the shut down process has  
been completed.  
System automatic Sleep/Hibernation  
This feature automatically turns off the system in Sleep or Hibernation  
Mode if the computer is not used for a set duration. Refer to Special  
features, in Chapter 4 for an explanation of how to set the duration.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-12  
       
Chapter 6  
T
6
r
e
t
p
a
h
C
roubleshooting  
TOSHIBA have designed this computer for durability, however, should  
problems occur you are able to use the procedures detailed in this chapter  
to help determine the cause.  
All users should become familiar with this chapter as knowing what might  
go wrong can help prevent problems from occurring in the first place.  
Problem solving process  
Resolving problems will be much easier if you observe the following  
guidelines:  
Stop immediately when you recognize a problem exists as taking further  
action may result in data loss or damage, or you may destroy valuable  
problem related information that can help solve the problem.  
Observe what is happening - write down what the system is doing and  
what actions you performed immediately before the problem occurred.  
Make a screenshot of the current display.  
Please also be aware that the questions and procedures described in this  
chapter are meant only as a guide, they are not definitive problem solving  
techniques. In reality many problems can be solved simply, but a few may  
require help from TOSHIBA Support - if you find you need to consult others,  
be prepared to describe the problem in as much detail as possible.  
Preliminary checklist  
You should always consider the simplest solution first - the items detailed in  
this checklist are easy to fix and yet can cause what appears to be a  
serious problem:  
Make sure you turn on all peripheral devices before you turn on the  
computer - this includes your printer and any other external device you  
are using.  
Before you attach an external device you should first turn the computer  
off, then when you turn the computer back on again it will recognize the  
new device.  
Make sure all optional accessories are configured properly in the  
computer's setup program and that all required driver software has  
been loaded (please refer to the documentation included with the  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-1  
   
optional accessories for further information on its installation and  
configuration).  
Check all cables to ensure they are correctly and firmly attached to the  
computer - loose cables can cause signal errors.  
Inspect all connecting cables for loose wires and all connectors for  
loose pins.  
Check that your CD/DVD/BD media is correctly loaded  
Always try to make detailed notes of your observations and keep them in a  
permanent error log - this will help you to describe your problems to  
TOSHIBA Support. In addition, if a problem recurs, the log you have made  
will help to identify the problem faster.  
Analyzing the problem  
Sometimes the computer will give you clues that can help you identify why  
it is malfunctioning. In view of this you should keep the following questions  
in mind:  
Which part of the computer is not operating properly - keyboard, hard  
disk drive, display panel, touch pad, touch pad control buttons - as each  
device will produce different symptoms.  
Check the options within the operating system to ensure that its  
configuration is set properly.  
What appears on the display? Does it display any messages or random  
characters? Make a screenshot of the current display and, if possible,  
look up the messages in the documentation included with the computer,  
software or operating system.  
Check that all connecting cables are correctly and firmly attached as  
loose cables can cause erroneous or intermittent signals.  
Do any indicators light, if so, which ones, what color are they and do  
they stay on or blink? Write down what you see.  
Do you hear any beeps, if so how many, are they long or short and are  
they high pitched or low pitched? In addition, is the computer making  
any unusual noises? Write down what you hear.  
Record your observations so you can describe them in detail to TOSHIBA  
Support.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-2  
 
Software  
The problems may be caused by your software or  
disk. If you cannot load a software package, the  
media may be damaged or the program might be  
corrupted - in these instances try loading another  
copy of the software if possible.  
If an error message appears while you are using a  
software package you should refer to the  
documentation supplied with it as this will usually  
include a problem solving section or a summary of  
error messages.  
Next, you should check any error messages  
against the operating system documentation.  
Hardware  
If you cannot find a software problem, you should  
then check the setup and configuration of your  
hardware. First run through the items in the  
preliminary checklist as described previously then,  
if you still cannot correct the problem, try to identify  
the source - the next section provides checklists  
for individual components and peripherals.  
Before using a peripheral device or application software that is not an  
authorized TOSHIBA part or product, make sure the device or software can  
be used with your computer. Use of incompatible devices may cause injury  
or may damage your computer.  
If something goes wrong  
Your program stops responding  
If you are working with a program that suddenly freezes all operations,  
chances are the program has stopped responding. You can exit the failed  
program without shutting down the operating system or closing other  
programs.  
To close a program that has stopped responding:  
1. Press CTRL, ALT, and DEL simultaneously (once), then click Start  
Task Manager. The Windows® Task Manager window appears.  
2. Click the Applications tab. If a program has stopped responding, the  
words "not responding" appear beside its name in the list.  
3. Select the program you want to close, then click End Task. Closing the  
failed program should allow you to continue working. If it does not,  
continue with the next step.  
4. Close the remaining programs one by one by selecting the program  
name, then End Task. Closing all programs should allow you to  
continue working. If it does not, power off your computer and then  
restart it.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-3  
The computer will not start  
Make sure you attached the AC adaptor and power cord/cable properly or  
installed a charged battery.  
If you are using the AC adaptor, check that the wall outlet is working by  
plugging in another device, such as a lamp.  
Verify that the computer is on by looking at the ON/OFF indicator.  
If the indicator is glowing, the computer is on. Also, try turning the computer  
off and then on.  
If you are using an AC adaptor, verify that the computer is receiving power  
from the external power source by looking at the AC power light. If the  
indicator is glowing, the computer is connected to a live external power  
source.  
Hardware and system checklist  
This section discusses problems caused by your computer’s hardware or  
attached peripherals. Basic problems may occur in the following areas:  
Power  
USB device  
Keyboard  
Additional memory module  
Sound system  
External monitor  
LAN  
Internal display panel  
Hard disk drive  
Optical Disc Drive  
Memory Media Card  
Pointing Device  
Wireless LAN  
Bluetooth  
Power  
When the computer is not plugged into an AC power outlet, the battery  
pack is the primary power source. However, your computer also has a  
number of other power resources, including an intelligent power supply and  
a Real Time Clock (RTC) battery, all of which are interrelated with any one  
having the ability to produce apparent power problems.  
AC power  
If you have trouble turning on the computer with the AC adaptor connected  
you should check the status of the DC IN/Battery indicator. Please refer to  
Chapter 5, Power and Power-Up Modes for further information.  
User’s Manual  
6-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Problem  
Procedure  
AC adaptor doesn’t Check the connections to make sure that the power  
power the computer cord/adaptor is firmly connected to the computer  
and a working power outlet.  
Check the condition of the cord and terminals. If the  
cord is frayed or damaged it should be replaced,  
while if the terminals are soiled, they should be  
cleaned with a clean cotton cloth.  
If the AC adaptor still does not power the computer,  
you should contact TOSHIBA Support.  
Battery  
If you suspect a problem with the battery, you should check the status of  
the DC IN indicator as well as the Battery indicator, or DC IN/Battery  
indicator.  
Problem  
Procedure  
Battery doesn’t  
The battery may be discharged - connect the AC  
power the computer adaptor to recharge the battery.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-5  
 
Problem  
Procedure  
Battery doesn’t  
If the battery is completely discharged, it will not  
charge when the AC begin charging immediately, in these instances you  
adaptor is attached should wait a few minutes before trying again. If the  
(Battery indicator or battery still does not charge, you should check that  
DC IN/Battery  
indicator does not  
glow amber).  
the power outlet the AC adaptor is connected to is  
supplying power - this can be tested by plugging  
another appliance into it.  
Check whether the battery is hot or cold to the touch  
- if so, it will not charge properly and should be  
allowed to reach room temperature before you try  
again.  
Unplug the AC adaptor and remove the battery to  
make sure its connecting terminals are clean - if  
necessary wipe them with a soft dry cloth lightly  
dipped in alcohol.  
Connect the AC adaptor and replace the battery,  
taking care to ensure that it is securely seated in the  
computer.  
(For Satellite L770/L775/L770D/L775D/Satellite Pro  
L770/L775/L770D/L775D Models) Check the  
Battery indicator - if it does not glow, allow the  
computer to charge the battery for at least twenty  
minutes. If the Battery indicator starts to glow after  
this period, allow the battery to continue to charge  
for at least another twenty minutes before turning  
on the computer. However, if the indicator still does  
not glow, the battery may be at the end of its  
operating life and should be replaced. However, if  
you do not believe the battery is at the end of its  
operating life, you should speak to TOSHIBA  
Support.  
(For Satellite C670/C675/C670D/C675D/Satellite  
Pro C670/C675/C670D Models) Check the DC  
IN/Battery indicator - if it glows amber, charge the  
battery until the DC IN/Battery indicator glows  
green. If it glows green, disconnect the AC adaptor  
and operate the computer. If the computer shuts  
down, the battery may be at the end of its operating  
life and should be replaced. However, if you do not  
believe the battery is at the end of its operating life,  
you should contact a TOSHIBA Support.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-6  
Problem  
Procedure  
Battery doesn’t  
If you frequently recharge a partially charged  
power the computer battery, the battery might not charge to its full  
as long as expected potential - in these instances you should fully  
discharge the battery and then attempt to charge it  
again.  
Check the Power saver option under Select a  
power plan in the Power Options.  
Real Time Clock  
Problem  
Procedure  
The following  
The charge in the Real Time Clock (RTC) battery  
message is displayed has run out - you will need to set the date and time  
on the screen:  
in the BIOS setup application by using the following  
steps:  
RTC Power Failure.  
Check system. Then 1. Turn on the computer.  
press [F2] key.  
2. Press the F2 key when the TOSHIBA Leading  
Innovation >>> screen appears - the BIOS  
setup application will load.  
3. Set the date in the System Date field.  
4. Set the time in the System Time field.  
5. Press F10 - a confirmation message will be  
displayed.  
6. Press the ENTER key - the BIOS setup  
application will end and the computer will  
restart.  
Keyboard  
Keyboard problems can be caused by the setup and configuration of the  
computer - please refer to the section The Keyboard in Chapter 3,  
Operating Basics, for further information.  
Problem  
Procedure  
Output to screen is  
garbled  
Please refer to your software's documentation to  
ensure that its is not remapping the keyboard in any  
way (remapping involves changing or reassigning  
the function of each key).  
If you are still unable to use the keyboard, you  
should contact TOSHIBA Support.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-7  
   
Internal display panel  
Apparent computer's display panel problems may be related to the  
computer's setup and configuration - please refer to the HW Setup section  
in Chapter 4, Utilities & Advanced Usage, for further information.  
Problem  
Procedure  
No display  
Press the FN + F5 hot keys to adjust the display  
priority, and to make sure it is not set for output to  
an external monitor.  
Markings appear on These marks may have come from contact with the  
the computer's  
display panel.  
keyboard and Touch Pad while the display panel  
has been closed. You should try to remove the  
marks by gently wiping the display panel with a  
clean dry cloth or, if this fails, with a good quality  
LCD screen cleaner. In this latter instance you  
should always follow the instructions with the  
screen cleaner and always ensure you let the  
display panel dry properly before closing it.  
Hard disk drive  
Problem  
Procedure  
Computer does not Check to see whether there is a disc in the optical  
boot from hard disk disc drive - if so remove it and try to start the  
drive  
computer again.  
If this has no effect, check the Boot Priority setting  
within the TOSHIBA HW Setup utility - please refer  
to the Boot Setting section in Chapter 4, Utilities &  
Advanced Usage for further information.  
Slow performance  
The files on the hard disk drive may be fragmented -  
in this instance you should run the disk  
Defragmentation utility to check the condition of  
your files and the hard disk drive. Please refer to the  
operating system's documentation or online Help  
File for further information on operating and using  
the Defragmentation utility.  
As a last resort you should reformat the hard disk  
drive and then reload the operating system and all  
other files and data. If you are still unable to resolve  
the problem, contact TOSHIBA Support.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-8  
   
Optical Disc Drive  
For more information, refer to Chapter 3, Operating Basics.  
Problem  
Procedure  
You cannot access  
Make sure the drive’s disc tray is securely closed.  
Press gently until it clicks into place.  
a CD/DVD/BD in the  
drive  
Open the disc tray and make sure the disc is  
properly seated. It should lie flat with the label  
facing up.  
A foreign object in the disc tray could block laser  
light from reading the disc. Make sure there is no  
obstruction. Remove any foreign object.  
Check whether the disc is dirty. If it is, wipe it with a  
clean cloth dipped in water or a neutral cleaner.  
Refer to the Media care section in Chapter 3 for  
details on cleaning.  
Memory Media Card  
For further information, please refer to Chapter 3, Operating Basics.  
Problem  
Procedure  
Memory media card Remove the memory media card from the computer  
error occurs  
and then reinsert it in order to ensure it is firmly  
connected.  
If the problem persists, then you should refer to the  
documentation supplied with your memory media  
card for further information.  
You cannot write to a Remove the memory media card from the computer  
memory media card and check to ensure that it is not write protected.  
You cannot read a file Check to ensure the required file is actually on the  
memory media card that is inserted into the  
computer.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
Pointing device  
If you are using a USB mouse, you should also refer to both the USB  
mouse section in this chapter, and the documentation supplied with your  
mouse.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-9  
     
Touch Pad  
Problem  
Procedure  
The Touch Pad does Check the Device Select settings.  
not work.  
Click Start -> Control Panel -> Hardware and  
Sound -> Mouse.  
Pressing FN + F9 or Touch Pad ON/OFF button to  
enable.  
On-screen pointer  
In this instance the system might be busy - Try  
does not respond to moving the mouse again after waiting a short while.  
pointing device  
operation  
Double-tapping does In this instance, you should initially try changing the  
not work  
double-click speed setting within the Mouse Control  
utility.  
1. To access this utility, click Start -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Buttons tab.  
3. Set the double-click speed as required and click  
OK.  
The on-screen  
pointer moves too  
fast or too slow  
In this instance, you should initially try changing the  
speed setting within the Mouse Control utility.  
1. To access this utility, click Start -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Pointer Options tab.  
3. Set the pointer speed as required and click OK.  
The reaction of Touch Adjust the touch Sensitivity.  
pad is either too  
To access it, click Start -> Control Panel ->  
Hardware and Sound -> Mouse.  
sensitive or not  
sensitive enough.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
USB mouse  
Problem  
Procedure  
On-screen pointer  
In this instance the system might be busy - Try  
does not respond to moving the mouse again after waiting a short while.  
mouse operation  
Remove the mouse from the computer and then  
reconnect it to a free USB port it in order to ensure it  
is firmly attached.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-10  
     
Problem  
Procedure  
Double-clicking does In this instance, you should initially try changing the  
not work  
double-click speed setting within the Mouse Control  
utility.  
1. To access this utility, click Start -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Buttons tab.  
3. Set the double-click speed as required and click  
OK.  
The on-screen  
pointer moves too  
fast or too slow  
In this instance, you should initially try changing the  
speed setting within the Mouse Control utility.  
1. To access this utility, click Start -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Pointer Options tab.  
3. Set the pointer speed as required and click OK.  
The on-screen  
pointer moves  
erratically  
The elements of the mouse responsible for  
detecting movement might be dirty - please refer to  
the documentation supplied with the mouse for  
instructions on how to clean it.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
USB device  
In addition to the information in this section, please also refer to the  
documentation supplied with your USB device.  
Problem  
Procedure  
USB device does not Remove the USB device from the computer and  
work  
then reconnect it to a free port in order to ensure it  
is firmly attached.  
Ensure that any required USB device drivers are  
properly installed - to achieve this you should refer  
to both the device documentation and the operating  
system documentation.  
Sleep and Charge function  
For more information and settings, please refer to the Using the TOSHIBA  
Sleep Utility section in Chapter 4, Utilities & Advanced Usage.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-11  
   
Problem  
Procedure  
I cannot use the  
Sleep and Charge  
function.  
Sleep and Charge function may be disabled.  
Select the "Enable Sleep and Charge" check box in  
the TOSHIBA Sleep utility to enable this function.  
When there is a current overflow of the external  
device connected to the compatible port, USB bus  
power (DC5V) supply may be stopped for safety  
reasons. When this happens, disconnect an  
external device if some external devices are  
connected. After that, turn the power of the  
computer ON/OFF to restore the function. If this  
function can not be still used even if only one  
external device is connected, stop using the  
external device because its current is over the  
acceptable value of this computer.  
Some external devices may not be able to use the  
Sleep and Charge function. In this case, please try  
one or more of the following methods.  
Select another mode.  
Turn OFF the computer while external devices  
are connected.  
Connect external devices after turning OFF of  
the computer.  
If this function can not be still used, change the  
setting to disable the function and stop using this  
function.  
The battery depletes If Sleep and Charge function is enabled, the  
quickly even when I computer's battery will discharge during hibernation  
turned OFF the  
power of the  
computer.  
or when the computer is turned off.  
Connect the AC adaptor to the computer or disable  
the Sleep and Charge function.  
External devices  
connected to the  
Some external devices may not work when  
connected to a compatible port if the Sleep and  
compatible ports do Charge function is enabled.  
not work when  
Reconnect the external device after turning the  
computer ON.  
connected to a  
compatible port.  
If the external device still does not work, connect  
device to an USB port that does not have the Sleep  
and Charge function-compatible icon ( ) or change  
to disable the Sleep and Charge function.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-12  
Problem  
Procedure  
The "USB Wakeup  
function" does not  
work.  
When Sleep and Charge function is enabled, the  
"USB WakeUp" function does not work for ports that  
support the Sleep and Charge function.  
In that case, use an USB port that does not have  
the USB Sleep and Charge function-compatible  
icon ( ) or change to disable Sleep and Charge  
function.  
Additional memory module  
Please also refer to Chapter 3, Operating Basics, for further information on  
installing and removing memory modules.  
Problem  
Procedure  
An error will occur if Remove the memory module from Slot B and insert  
a memory module is it into Slot A.  
inserted into Slot B  
while no memory  
module is inserted  
in Slot A.  
Sound system  
In addition to the information in this section, please also refer to the  
documentation supplied with your audio device.  
Problem  
Procedure  
No sound is heard  
Adjust the volume.  
To increase the volume press FN + 4 hot key, and to  
decrease it press FN + 3 hot key.  
Check the software volume settings.  
Please check to see if Mute is turned to Off  
Check to make sure the headphone connection is  
secure.  
Check within the Windows Device Manager  
application to ensure the sound device is enabled  
and that the device is properly working.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-13  
     
Problem  
Procedure  
Annoying sound is  
heard  
In this instance you may be experiencing feedback  
from either the internal microphone or an external  
microphone connected to the computer - please  
refer to Sound System in Chapter 3, Operating  
Basics for further information.  
Volume cannot be adjusted during Windows start  
up or shut down.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
External monitor  
Please also refer to Chapter 3, Operating Basics, and to the documentation  
supplied with your monitor for further information.  
Problem  
Procedure  
Monitor does not turn After confirming that the monitor's power switch is  
on  
on, you should check the connections to make sure  
that the power cord/adaptor is firmly connected to  
the monitor and to a working power outlet.  
No display  
Try adjusting the contrast and brightness controls  
on the external monitor.  
Press the FN + F5 hot key in order to change the  
display priority and ensure that it is not set for the  
internal display only.  
Check to see if the external monitor is connected.  
When the external monitor is set as the primary  
display device in extended desktop mode, it will not  
display when the computer wakes up from Sleep  
Mode if the external monitor has been disconnected  
while in Sleep Mode.  
To keep this from happening, do not disconnect the  
external monitor while the computer is in Sleep or  
Hibernation Mode.  
Remember to turn off the computer before  
disconnecting the external monitor.  
When the display panel and an external monitor are  
set to clone mode and they are turned off by the  
timer, the display panel or the external monitor may  
not display when turned on again.  
If this occurs, press FN + F5 to re-set the display  
panel and external monitor to clone mode.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-14  
   
Problem  
Procedure  
Display error occurs Check that the cable connecting the external  
monitor to the computer is firmly attached.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
LAN  
Problem  
Procedure  
Cannot access LAN Check for a firm cable connection between the LAN  
jack and the LAN hub.  
Wake-up on LAN  
does not work  
Make sure the AC adaptor is connected. The Wake-  
up on LAN function consumes power even when  
the system is off.  
If problems persist, consult your LAN administrator.  
Wireless LAN  
If the following procedures do not restore LAN access, consult your LAN  
administrator. For more information on wireless communication, refer to  
Chapter 3, Operating Basics.  
Problem  
Procedure  
Cannot access  
Wireless LAN  
Make sure the computer's Wireless communication  
function is on.  
If problems persist, contact your LAN administrator.  
Bluetooth  
For further information on Bluetooth wireless communication, please refer  
to Chapter 3, Operating Basics.  
Problem  
Procedure  
Cannot access  
Bluetooth device  
Check to ensure the computer's Wireless  
Communication function is on.  
Check to ensure the Bluetooth Manager application  
is running on the computer and that power to the  
external Bluetooth device is turned on.  
Check to ensure that no optional Bluetooth Adaptor  
is installed in the computer - the built-in Bluetooth  
hardware cannot operate simultaneously with  
another Bluetooth controller.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-15  
       
TOSHIBA support  
If you require any additional help using your computer or if you are having  
problems operating the computer, you may need to contact TOSHIBA for  
additional technical assistance.  
Before you call  
Some problems you experience may be related to software or the operating  
system so it is important that you investigate other sources of assistance  
first. Before contacting TOSHIBA, try the following:  
Review troubleshooting sections in the documentation supplied with  
your software and/or peripheral devices.  
If a problem occurs when you are running software applications, consult  
the software documentation for troubleshooting suggestions and  
consider calling the software company's technical support department  
for assistance.  
Consult the reseller or dealer from where you purchased your computer  
and/or software - they are your best resource for current information  
and support.  
TOSHIBA technical support  
If you are still unable to solve the problem and suspect that it is hardware  
related, visit TOSHIBA technical support website  
http://www.toshiba.co.jp/worldwide/.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-16  
   
Appendix A  
S
A
x
i
d
n
e
p
p
A
pecifications  
This appendix summarizes the computer’s technical specifications.  
Physical Dimensions  
Size  
413.6(w) x 270 (d) x 28/37.9 (h) millimeters  
(not including parts that extend beyond the  
main body).  
Environmental Requirements  
Conditions  
Operating  
Ambient temperature Relative humidity  
5°C (41°F) to 35°C  
(95°F)  
20% to 80%  
(noncondensing)  
Non-operating  
-20°C (-4°F) to 60°C  
(140°F)  
10% to 90%  
(noncondensing)  
Wet-bulb temperature 26°C maximum  
Conditions  
Operating  
Altitude (from sea level)  
-60 to 3,000 meters  
Non-operating  
-60 to 10,000 meters  
maximum  
Power Requirements  
AC adaptor  
100-240 volts AC  
50 or 60 hertz (cycles per second)  
19V DC  
Computer  
User’s Manual  
A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
External RGB monitor port pin assignment  
1
5
10  
6
11  
15  
Pin  
1
Signal Name  
CRV  
Description  
I/O  
O
Red Video Signal  
Green Video Signal  
Blue Video Signal  
Reserved  
2
CGV  
O
3
CBV  
O
4
Reserved  
GND  
5
Ground  
6
GND  
Ground  
7
GND  
Ground  
8
GND  
Ground  
9
+5V  
Power Supply  
Ground  
10  
11  
12  
13  
14  
15  
GND  
Reserved  
SDA  
Reserved  
Data Signal  
I/O  
O
HSYNC  
VSYNC  
SCL  
Horizontal Sync Signal  
Vertical Sync Signal  
Data Clock Signal  
O
O
I/O (I): Input to computer  
I/O (O): Output from computer  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-2  
 
Appendix B  
A
B
x
i
d
n
e
p
p
A
C Power Cord and Connectors  
The power cord’s AC input plug must be compatible with the various  
international AC power outlets and the cord must meet the standards for  
the country/region in which it is used. All cords must meet the following  
specifications:  
Minimum 0.75 mm2  
Wire size:  
Current rating:  
Voltage rating:  
Minimum 2.5 amperes  
125 or 250V AC (depending on country/region’s  
power standards)  
Certification agencies  
China:  
CQC, CEMC  
U.S. and Canada:  
UL listed and CSA certified  
No. 18 AWG, Type SVT or SPT-2  
Australia:  
Japan:  
AS  
DENANHO  
Europe:  
Austria:  
Belgium:  
Denmark:  
Finland:  
France:  
OVE  
Italy:  
IMQ  
CEBEC  
DEMKO  
FIMKO  
LCIE  
The Netherlands:  
Norway:  
KEMA  
NEMKO  
SEMKO  
SEV  
Sweden:  
Switzerland:  
United Kingdom:  
Germany:  
VDE  
BSI  
In Europe, two conductors power cord must be VDE type, H05VVH2-F or  
H03VVH2-F and for three conductors power cord must be VDE type,  
H05VV-F.  
For the United States and Canada, two pin plug configuration must be a 2-  
15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-1  
   
15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical  
code handbook and the Canadian Electrical Code Part II.  
The following illustrations show the plug shapes for the U.S.A. and Canada,  
the United Kingdom, Australia, Europe and China.  
USA  
United Kingdom  
UL approved  
BS approved  
Australia  
Europe  
Approved by the appropriate  
agency  
AS approved  
Canada  
China  
CSA approved  
CCC approved  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-2  
Appendix C  
L
C
x
i
d
n
e
p
p
A
egal Footnotes  
This chapter states the Legal Footnotes information applicable to TOSHIBA  
computers.  
Non-applicable Icons  
Certain computer chassis are designed to accommodate all possible  
configurations for an entire product series. Therefore, please be aware that  
your selected model may not have all the features and specifications  
corresponding to all of the icons or switches shown on the computer  
chassis.  
CPU  
Central Processing Unit ("CPU") Performance Legal Footnotes.  
CPU performance in your computer product may vary from specifications  
under the following conditions:  
use of certain external peripheral products  
use of battery power instead of AC power  
use of certain multimedia, computer generated graphics or video  
applications  
use of standard telephone lines or low speed network connections  
use of complex modeling software, such as high end computer aided  
design applications  
use of several applications or functionalities simultaneously  
use of computer in areas with low air pressure (high altitude >1,000  
meters or >3,280 feet above sea level)  
use of computer at temperatures outside the range of 5°C to 30°C (41°F  
to 86°F) or >25°C (77°F) at high altitude (all temperature references are  
approximate and may vary depending on the specific computer model -  
please refer to your computer documentation or visit the TOSHIBA  
website at www.pcsupport.toshiba.com for details).  
CPU performance may also vary from specifications due to design  
configuration.  
Under some conditions, your computer product may automatically shut-  
down. This is a normal protective feature designed to reduce the risk of lost  
User’s Manual  
C-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
data or damage to the product when used outside recommended  
conditions. To avoid risk of lost data, always make back-up copies of data  
by periodically storing it on an external storage medium. For optimum  
performance, use your computer product only under recommended  
conditions. Read additional restrictions in your product documentation.  
Contact TOSHIBA technical service and support, refer to Troubleshooting  
section in Chapter 6 Troubleshooting for more information.  
64-Bit Computing  
64-bit processors are designed to take advantage of 32 and 64 bit  
computing.  
64-bit computing requires that the following hardware and software  
requirements are met:  
64-bit Operating System  
64-bit CPU, Chipset and BIOS (Basic Input/Output System)  
64-bit Device drivers  
64-bit applications  
Certain device drivers and/or applications may not be compatible with a 64-  
bit CPU and therefore may not function properly.  
Memory (Main System)  
Part of the main system memory may be used by the graphics system for  
graphics performance and therefore reduce the amount of main system  
memory available for other computing activities. The amount of main  
system memory allocated to support graphics may vary depending on the  
graphics system, applications utilized, system memory size and other  
factors.  
If your computer is configured with more than 3 GB memory, the memory  
might be displayed as approximately 3 GB only (depending on the  
computer’s hardware specifications).  
This is correct because the operating system usually displays the available  
memory instead of the physical memory (RAM) built into the computer.  
Various system components (like the video adapter’s GPU and PCI devices  
like Wireless LAN, etc.) require their own memory space. Since a 32-bit  
operating system cannot address more than 4 GB of memory, these  
system resources overlap the physical memory. It is a technical limitation  
that the overlapped memory is not available to the operating system. Even  
though some tools might display the actual physical memory built into your  
computer, the memory available to the operating system will still be  
approximately 3 GB only.  
Computers configured with a 64-bit operating system can address 4 GB or  
more of system memory.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-2  
 
Battery Life  
Battery life may vary considerably depending on product model,  
configuration, applications, power management settings and features  
utilized, as well as the natural performance variations produced by the  
design of individual components. Published battery life numbers are  
achieved on select models and configurations tested by TOSHIBA at the  
time of publication. Recharge time varies depending on usage. Battery may  
not charge while computer is consuming full power.  
After going through many charge and discharge cycles, the battery will lose  
its ability to perform at maximum capacity and will need to be replaced.  
This is a normal phenomenon for all batteries. To purchase a new battery  
pack, see the accessories information that is shipped with your computer.  
Hard Disk Drive (HDD) Capacity  
1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The  
computer operating system, however, reports storage capacity using  
powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and  
therefore shows less storage capacity. Available storage capacity will also  
be less if the product includes one or more pre-installed operating systems,  
such as Microsoft Operating System and/or pre-installed software  
applications, or media content. Actual formatted capacity may vary.  
LCD  
Over a period of time, and depending on the usage of the computer, the  
brightness of the LCD screen will deteriorate. This is an intrinsic  
characteristic of LCD technology.  
Maximum brightness is only available when operating in AC power mode.  
Screen will dim when the computer is operated on battery power and you  
may not be able to increase the brightness of the screen.  
Graphics Processing Unit ("GPU")  
Graphics processing unit ("GPU") performance may vary depending on  
product model, design configuration, applications, power management  
settings and features utilized. GPU performance is only optimized when  
operating in AC power mode and may decrease considerably when  
operating in battery power mode.  
Total Available Graphics Memory is the total of, as applicable, Dedicated  
Video Memory, System Video Memory and Shared System Memory.  
Shared System Memory will vary depending on system memory size and  
other factors.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-3  
       
Wireless LAN  
The transmission speed over the wireless LAN and the distance over which  
wireless LAN can reach may vary depending on surrounding  
electromagnetic environment, obstacles, access point design and  
configuration, and client design and software/hardware configurations.  
The actual transmission speed will be lower than the theoretical maximum  
speed.  
Copy Protection  
Applicable copy protection standards included in certain media may  
prevent or limit recording or viewing of the media.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-4  
   
Appendix D  
I
D
x
i
d
n
e
p
p
A
nformation for Wireless Devices  
Wireless LAN Interoperability  
The Wireless LAN is compatible with other LAN systems Direct Sequence  
Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing  
(OFDM) radio technology, and is compliant to:  
The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or  
b/g/n), as defined and approved by the Institute of Electrical and  
Electronics Engineers.  
The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi  
Alliance®.  
The “Wi-Fi CERTIFIED™” logo is a certification mark of the Wi-Fi  
Alliance®.  
Bluetooth wireless technology Interoperability  
Bluetooth™ Cards from TOSHIBA are designed to be interoperable with  
any product with Bluetooth wireless technology that is based on Frequency  
Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:  
Bluetooth Specification Ver. 3.0+HS or Ver. 3.0 (depending on the  
model you purchased), as defined and approved by the Bluetooth  
Special Interest Group.  
Logo certification with Bluetooth wireless technology as defined by the  
Bluetooth Special interest Group.  
CAUTION about Wireless Devices  
The wireless devices have not completed verification of connection and  
operation with all devices which are using the Wireless LAN or Bluetooth  
radio technology.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-1  
       
Bluetooth and Wireless LAN devices operate within the same radio  
frequency range and may interfere with one another. If you use Bluetooth  
and Wireless LAN devices simultaneously, you may occasionally  
experience a less than optimal network performance or even lose your  
network connection.  
If you should experience any such problem, immediately turn off either one  
of your Bluetooth or Wireless LAN.  
Please visit http://www.pc.support.global.toshiba.com, if you have any  
questions about using Wireless LAN or Bluetooth Card from TOSHIBA.  
In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm  
Your Bluetooth product is not compatible with devices using Bluetooth  
Version 1.0B specifications  
Wireless Devices and your health  
Wireless products, like other radio devices, emit radio frequency  
electromagnetic energy. The level of energy emitted by Wireless products  
however is far much less than the electromagnetic energy emitted by  
wireless devices like for example mobile phones.  
Because Wireless products operate within the guidelines found in radio  
frequency safety standards and recommendations, TOSHIBA believes  
Wireless products is safe for use by consumers. These standards and  
recommendations reflect the consensus of the scientific community and  
result from deliberations of panels and committees of scientists who  
continually review and interpret the extensive research literature.  
In some situations or environments, the use of Wireless products may be  
restricted by the proprietor of the building or responsible representatives of  
the organization. These situations may for example include:  
Using the Wireless products equipment on board of airplanes, or  
In any other environment where the risk of interference to other devices  
or services is perceived or identified as harmful.  
If you are uncertain of the policy that applies on the use of wireless devices  
in a specific organization or environment (e.g. airports), you are  
encouraged to ask for authorization to use the Wireless device prior to  
turning on the equipment.  
Radio Regulatory Information  
The Wireless device is must be installed and used in strict accordance with  
the manufacturer’s instructions as described in the user documentation that  
comes with the product. This product complies with the following radio  
frequency and safety standards.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-2  
   
Europe  
Restrictions for Use of 2400.0-2483.5MHz Frequencies in  
Europe  
France:  
Outdoor use  
Military Radiolocation use.Refarming  
limited to 10mW of the 2.4GHz band has been  
e.i.r.p. within the ongoing in recent years to allow  
band 2454-  
2483.5MHz  
current relaxed regulation Full  
implementation planned 2012.  
Italy:  
-
For private use, a general  
authorization is required if  
WAS/RLAN’s are used outside own  
premises. For public use, a general  
authorization is required.  
Luxembourg:  
Norway:  
Implemented  
Implemented  
General authorization required for  
network and service supply.  
This subsection does not apply for  
the geographical area within a radius  
of 20 km from the centre of Ny-  
Alesund.  
Russian  
-
Only for indoor applications.  
Federation:  
Restrictions for Use of 5150-5350MHz Frequencies in  
Europe  
Italy:  
-
For private use, a general  
authorization is required if  
WAS/RLAN’s are used outside own  
premises.  
Luxembourg:  
Implemented  
Limited  
General authorization required for  
network and service supply.  
Russian  
Federation:  
e.i.r.p 100mW. Permitted to use only  
for indoor applications, closed  
industrial and warehouse areas, and  
on board aircraft.  
1. Permitted to use for local  
networks of aircraft crew service  
communications on board aircraft  
in area of the airport and at all  
stages of flight.  
2. Permitted to use for public  
wireless access local networks on  
board aircraft during a flight at the  
altitude not less than 3000m.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-3  
Restrictions for Use of 5470-5725MHz Frequencies in  
Europe  
Italy:  
-
For private use, a general  
authorization is required if  
WAS/RLAN’s are used outside own  
premises.  
Luxembourg:  
Implemented  
Limited  
General authorization required for  
network and service supply  
Russian  
Federation:  
e.i.r.p 100mW. Permitted to use only  
for indoor applications, closed  
industrial and warehouse areas, and  
on board aircraft.  
1. Permitted to use for local  
networks of aircraft crew service  
communications on board aircraft  
in area of the airport and at all  
stages of flight.  
2. Permitted to use for public  
wireless access local networks on  
board aircraft during a flight at the  
altitude not less than 3000m.  
To remain in conformance with European spectrum usage laws for  
Wireless LAN operation, the above 2.4GHz and 5GHz channel limitations  
apply for outdoor usage. The user should use the wireless LAN utility to  
check the current channel of operation. If operation is occurring outside of  
the allowable frequencies for outdoor use, as listed above, the user must  
contact the applicable national spectrum regulator to request a license for  
outdoor operation.  
Canada - Industry Canada (IC)  
This device complies with RSS 210 of Industry Canada. Operation is  
subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including  
interference that may cause undesired operation of this device.  
The term “IC” before the equipment certification number only signifies that  
the Industry Canada technical specifications were met.  
USA-Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
Refer to the FCC information section for the detailed information.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-4  
Caution: Exposure to Radio Frequency Radiation  
The radiated output power of the Wireless device is far below the FCC  
radio frequency exposure limits. Nevertheless, the Wireless device shall be  
used in such a manner that the potential for human contact during normal  
operation is minimized.  
In the usual operating configuration, the distance between the antenna and  
the user should not be less than 20cm. Please refer to the computer user’s  
manual for the details regarding antenna location.  
The installer of this radio equipment must ensure that the antenna is  
located or pointed such that it does not emit RF field in excess of Health  
Canada limits for the general population; consult Safety Code 6, obtainable  
from Health Canada’s website www.hc-sc.gc.ca  
Caution: Radio Frequency Interference Requirements  
This device is restricted to indoor use due to its operation in the 5.15 to  
5.25GHz frequency range.  
Taiwan  
Article 12  
Without permission granted by the NCC, any  
company, enterprise, or user is not allowed to  
change frequency, enhance transmitting power or  
alter original characteristic as well as performance to  
an approved low power radio frequency devices.  
Article 14  
The low power radio-frequency devices shall not  
influence aircraft security and interfere legal  
communications;  
If found, the user shall cease operating immediately  
until no interference is achieved.  
The said legal communications means radio  
communications is operated in compliance with the  
Telecommunications Act.  
The low power radio-frequency devices must be  
susceptible with the interference from legal  
communications or ISM radio wave radiated  
devices.  
Using this equipment in Japan  
In Japan, the frequency bandwidth of 2,400MHz to 2,483.5MHz for second  
generation low-power data communication systems such as this equipment  
overlaps that of mobile object identification systems (premises radio station  
and specified low-power radio station).  
1. Important notice  
The frequency bandwidth of this equipment may operate within the same  
range as industrial devices, scientific devices, medical devices, microwave  
ovens, licensed radio stations and non-licensed specified low-power radio  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-5  
stations for mobile object identification systems (RFID) used in factory  
production lines (Other Radio Stations).  
1. Before using this equipment, ensure that it does not interfere with any of  
the equipment listed above.  
2. If this equipment causes RF interference to other radio stations,  
promptly change the frequency being used, change the location of use,  
or turn off the source of emissions.  
3. Contact an authorized TOSHIBA service provider if you have problems  
with interference caused by this product to Other Radio Stations.  
2. Indication for Wireless LAN  
The indication shown below appears on this equipment.  
1. 2.4 : This equipment uses a frequency of 2.4GHz.  
2. DS : This equipment uses DS-SS modulation.  
3. OF : This equipment uses OFDM modulation.  
4. 4 : The interference range of this equipment is less than 40m.  
5.  
: This equipment uses a frequency bandwidth from  
2,400MHz to 2,483.5MHz. It is possible to avoid the band of mobile  
object identification systems.  
3. Indication for Bluetooth  
The indication shown below appears on this equipment.  
1. 2.4 : This equipment uses a frequency of 2.4 GHz.  
2. FH : This equipment uses FH-SS modulation.  
3. 1 : The interference range of this equipment is less than 10 m.  
4.  
: This equipment uses a frequency bandwidth from 2,400  
MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object  
identification systems.  
4. About the JEITA  
5GHz Wireless LAN supports W52/W53/W56 Channel.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-6  
Device Authorization  
This device obtains the Technical Regulation Conformity Certification and it  
belongs to the device class of radio equipment of low-power data  
communication system radio station stipulated in the Telecommunications  
Business Law of Japan.  
Atheros AR9285 Wireless Network Adapter b/g/n (b/g) module  
The Name of the radio equipment: AR5B95  
DSP Research, Inc.  
Approval Number: D081038003  
Realtek® RTL8188CE Wireless LAN 802.11n PCI-E NIC b/g/n Wireless  
LAN  
The Name of the radio equipment: RTL8188CE  
DSP Research, Inc.  
Approval Number: D100075001  
Atheros AR9002WB-1NG Wireless Network Adapter b/g/n (b/g)  
Wireless LAN and Bluetooth  
The Name of the radio equipment: AR5B195  
DSP Research, Inc.  
Approval Number: D091014003  
The following restrictions apply:  
Do not disassemble or modify the device.  
Do not install the embedded wireless module into other device.  
When using the wireless device in any country or region, refer to the  
section Approved Countries/Regions for use in the online manual.  
Radio approvals for wireless devices  
Approved Countries/Regions for the Atheros® AR9285 Wireless  
Network Adapter b/g/n (b/g) Wireless LAN  
This equipment is approved to the radio standard by the countries/regions  
in the following table.  
Do not use this equipment in the countries/regions which are not listed in  
the table below.  
Available channel of Peer-to-peer connection by ad-hoc mode is Ch1-  
Ch11.  
Connection with an access point by the Infrastructure mode is Ch1-  
Ch13.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-7  
   
As of Feb. 2011  
Albania  
Australia  
Bahrain  
Bulgaria  
Austria  
Belgium  
Canada  
Azerbaijan  
Bolivia  
Argentina  
Bosnia and  
Cambodia  
Herzegovina  
Chile  
China  
Colombia  
Costa Rica  
Croatia  
Cyprus  
Czech Republic Denmark  
Dominican Republic Ecuador  
Egypt  
El Salvador  
Germany  
Hong Kong  
Indonesia  
Jordan  
Estonia  
Finland  
Greece  
Iceland  
Italy  
France  
Ghana  
Guatemala  
India  
Hungary  
Ireland  
Japan  
Kazakhstan  
Latvia  
Kenya  
Kuwait  
Kyrgyzstan  
Lithuania  
Malta  
Lebanon  
Macedonia  
Monaco  
Norway  
Liechtenstein  
Malaysia  
Montenegro  
Oman  
Luxembourg  
Mexico  
Netherlands  
Panama  
Peru  
New Zealand  
Pakistan  
Papua New  
Guinea  
Paraguay  
Philippines  
Qatar  
Poland  
Portugal  
Puerto Rico  
Serbia  
Romania  
Saudi Arabia  
Singapore  
South Korea  
Switzerland  
UAE  
Slovak Republic Slovenia  
South Africa  
Sweden  
Turkey  
Spain  
Sri Lanka  
Thailand  
Ukraine  
Vietnam  
Taiwan  
UK  
USA  
Uruguay  
Zimbabwe  
Venezuela  
Yemen  
Approved Countries/Regions for the Realtek® RTL8188CE Wireless  
LAN 802.11n PCI-E NIC b/g/n Wireless LAN  
This equipment is approved to the radio standard by the countries/regions  
in the following table.  
Do not use this equipment in the countries/regions which are not listed in  
the table below.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-8  
An ad-hoc mode is not available in 802.11n mode.  
Available channel of Peer-to-peer connection by ad-hoc mode is Ch1-  
Ch11.  
Connection with an access point by the Infrastructure mode is Ch1-  
Ch13.  
As of Feb. 2011  
Albania  
Bahrain  
Australia  
Belgium  
Austria  
Bolivia  
Azerbaijan  
Bosnia and  
Herzegovina  
Brazil  
Chile  
Bulgaria  
China  
Canada  
Cambodia  
Costa Rica  
Colombia  
Croatia  
Cyprus  
Czech Republic Denmark  
Dominican Republic Ecuador  
Egypt  
El Salvador  
Germany  
Hong Kong  
Indonesia  
Jordan  
Estonia  
Ghana  
Finland  
Greece  
Iceland  
Italy  
France  
Guatemala  
India  
Hungary  
Ireland  
Japan  
Kazakhstan  
Latvia  
Kenya  
Kuwait  
Kyrgyzstan  
Liechtenstein  
Malaysia  
Montenegro  
New Zealand  
Panama  
Lebanon  
Luxembourg  
Mexico  
Namibia  
Oman  
Lesotho  
Macedonia  
Monaco  
Netherlands  
Pakistan  
Peru  
Lithuania  
Malta  
Mozambique  
Norway  
Papua New Guinea Paraguay  
Philippines  
Qatar  
Poland  
Portugal  
Puerto Rico  
Senegal  
Romania  
Singapore  
South Korea  
Switzerland  
Ukraine  
Saudi Arabia  
Serbia  
Slovak Republic Slovenia  
South Africa  
Sweden  
Spain  
Sri Lanka  
Thailand  
UK  
Taiwan  
UAE  
Turkey  
USA  
Uruguay  
Venezuela  
Vietnam  
Approved Countries/Regions for the Atheros AR9002WB-1NG  
Wireless Network Adaptor b/g/n (b/g) Wireless LAN and Bluetooth  
This equipment is approved to the radio standard by the countries/regions  
in the following table.  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-9  
Do not use this equipment in the countries/regions which are not listed in  
the table below.  
Available channel of Peer-to-peer connection by ad-hoc mode is Ch1-  
Ch11.  
Connection with an access point by the Infrastructure mode is Ch1-  
Ch13.  
As of Feb. 2011  
Albania  
Algeria  
Angola  
Argentina  
Bahrain  
Bolivia  
Australia  
Bangladesh  
Austria  
Azerbaijan  
Belgium  
Brazil  
Belarus  
Botswana  
Bosnia and  
Bulgaria  
Herzegovina  
Burkina Faso  
Canada  
Burundi  
Cambodia  
Cameroon  
China  
Central African Chile  
Republic  
Colombia  
Cyprus  
Comoros  
Costa Rica  
Croatia  
Czech Republic Democratic Republic Denmark  
of the Congo  
Dominican Republic Ecuador  
Egypt  
El Salvador  
Georgia  
Guatemala  
Iceland  
Estonia  
Finland  
France  
Germany  
Honduras  
India  
Ghana  
Greece  
Hungary  
Ireland  
Hong Kong  
Indonesia  
Ivory Coast  
Kenya  
Israel  
Italy  
Japan  
Jordan  
Kazakhstan  
Latvia  
Kuwait  
Kyrgyzstan  
Liberia  
Lebanon  
Lithuania  
Malawi  
Lesotho  
Luxembourg  
Malaysia  
Monaco  
Namibia  
Niger  
Liechtenstein  
Madagascar  
Mauritius  
Morocco  
New Zealand  
Norway  
Libia  
Malta  
Mexico  
Montenegro  
Netherlands  
Nigeria  
Mozambique  
Nicaragua  
Oman  
Pakistan  
Philippines  
Qatar  
Panama  
Poland  
Paraguay  
Portugal  
Peru  
Puerto Rico  
Republic of  
Chad  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-10  
Republic of Djibouti Republic of The Reunion  
Gambia  
Romania  
Rwanda  
Saudi Arabia  
Singapore  
South Korea  
Sweden  
Senegal  
Slovak Republic  
Spain  
Serbia  
Sierra Leone  
South Africa  
Swaziland  
Tajikistan  
Turkey  
Slovenia  
Sri Lanka  
Taiwan  
Switzerland  
Togo  
Thailand  
Tunisia  
UK  
Turkmenista  
Uruguay  
UAE  
Ukraine  
USA  
Venezuela  
Zimbabwe  
Vietnam  
Yemen  
Zambia  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-11  
Glossary  
The terms in this glossary cover topics related to this manual. Alternate  
naming is included for reference.  
Abbreviations  
AC:  
Alternating current  
ANSI:  
AMT:  
ASCII:  
American National Standards Institute  
Intel Active Management Technology  
American Standard Code for Information  
Interchange  
BIOS:  
basic input/output system  
bits per second  
bps:  
CD:  
compact disc  
CD-ROM:  
CD-RW:  
CMOS:  
CPU:  
Compact Disc Read-Only Memory  
Compact Disc-ReWritable  
complementary metal-oxide semiconductor  
central processing unit  
CRT:  
cathode ray tube  
DC:  
direct current  
DDR:  
double data rate  
DIMM:  
DVD:  
dual inline memory module  
digital versatile disc  
DVD-R:  
DVD-RAM:  
DVD-R DL:  
DVD-ROM:  
DVD-RW:  
DVD+R DL:  
eSATA:  
FDD:  
Digital Versatile Disc-Recordable  
Digital Versatile Disc-Random Access Memory  
Digital Versatile Disc Recordable Dual Layer  
Digital Versatile Disc-Read Only Memory  
Digital Versatile Disc-ReWritable  
Digital Versatile Disc Recordable Double Layer  
external Serial ATA  
floppy diskette drive  
FIR:  
fast infrared  
GB:  
gigabyte  
HDD:  
hard disk drive  
HDMI:  
IDE:  
High-Definition Multimedia Interface  
integrated drive electronics  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-1  
 
IEEE:  
I/O:  
Institute of Electrical and Electronics Engineers  
input/output  
IRQ:  
interrupt request  
KB:  
kilobyte  
LAN:  
local area network  
LCD:  
liquid crystal display  
LED:  
light emitting diode  
MB:  
megabyte  
MMC:  
OCR:  
PC:  
multi media card  
optical character recognition (reader)  
personal computer  
PCI:  
peripheral component interconnect  
random access memory  
red, green, and blue  
RAM:  
RGB:  
ROM:  
RTC:  
read only memory  
real time clock  
S/P DIF:  
SD:  
Sony/Philips Digital Interface Format  
Secure Digital  
SDHC:  
SDRAM:  
SLI:  
Secure Digital High Capacity  
synchronous dynamic random access memory  
Scalable Link Interface  
Solid state drive  
SSD:  
TFT:  
thin-film transistor  
USB:  
Universal Serial Bus  
UXGA:  
VGA:  
WAN:  
WSXGA:  
WSXGA+:  
WUXGA:  
WXGA:  
WXGA+:  
XGA:  
ultra extended graphics array  
video graphics array  
wide area network  
wide super extended graphics array  
wide super extended graphics array plus  
Wide Ultra Extended Graphics Array  
wide extended graphics array  
wide extended graphics array plus  
extended graphics array  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary-2  
Index  
A
Dual Pointing Device  
DVD Super Multi drive  
AC adaptor  
B
Battery  
E
F
FN + 2 (TOSHIBA Zooming Utility en-  
Bluetooth Stack for Windows by  
C
D
DC IN  
Display  
G
H
User’s Manual  
Index-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
memory media card  
MultiMediaCard  
P
Password  
HW Setup  
Pointing Device  
Power  
Shut Down mode (Boot Mode),  
K
Problems  
L
Hardware and system checklist,  
M
Media care  
Memory  
User’s Manual  
Index-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q See DVR H264 User Guide
Raypak Water Heater 0090A User Guide
Renesas Computer Hardware H8 3297 Series User Guide
Renesas Network Card REG10J0052 0200 User Guide
Rolls Music Mixer RM65 6 x 4 User Guide
Ryobi Drill D46C User Guide
Ryobi Drill HP472 User Guide
Samsung Indoor Furnishings WE357A0P User Guide
Samsung Projection Television HL S5686C User Guide
Sanyo Car Video System CE32LM4R E User Guide