DIGITAL HOME
THEATER SYSTEM
HT-DB660
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
Instruction Manual
T
V
D
V
D
R
E
C
E
I
V
E
R
OPEN/CLOSE
TV/VIDEO
MODE
DIMMER
DISC SKIP
TUNER
BAND
AUX
PL II MODE
SLOW
MO/ST
PL II EFFECT
LSM
–
LSM
+
RRSS
DVD
TUNING/CH
VOLUME
SURR.
SUPER 5.1
PLUS
V-H/P
ENTER
T
E
S
T
TONE
S
O
U
N
D
E
D T
I
T
U
N
E
R
M
E
M
O
R
Y
P
.
SC
A
N
S
L
E
E
P
C
A
N
C
E
L
ZOOM
L
O
G
O
EZ VIEW
R
E
P
E
A
T
REMAIN
COMPACT
COMPACT
DIGITAL AUDIO
DIGITAL VIDEO
V I D E O
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
READ INSTRUCTIONS
CLEANING
POWER LINES
REPLACEMENT PARTS
All the safety and operating instructions should be
read before the appliance is operated.
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
ANTENNA
LEAD IN WIRE
POLARIZATION
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near water-
forexample, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
GROUND
CLAMP
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
SAFETY CHECK
OUTDOOR ANTENNA GROUNDING
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
If an outside antenna is connected to the
•
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been
followed.
DAMAGE REQUIRING SERVICE
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
In the U.S.A section 810 of the National
•
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
c. If the video product has been exposed to rain
or water
d. If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER CORD PROTECTION
ATTACHMENTS
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from
battery power, or other sources, refer
to the operating instructions.
SERVICING
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
•
HEAT
Refer all servicing to qualified service personnel.
•
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that propduce heat.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Contents
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions.........................................................................................................................................................................2
Safety Instructions ..............................................................................................................................................................3
Features..............................................................................................................................................................................5
Notes on Discs....................................................................................................................................................................7
Description..........................................................................................................................................................................9
Multi-Disc Playback & AM/FM Tuner
The HT-DB660 combines the convenience of multi-disc playback capability, including DVD, VCD, CD,
MP3-CD, CD-R, CD-RW, and DVD-RW, with a sophisticated AM/FM tuner, all in a single player.
CONNECTIONS
Built-in 5.1-Channel Amplifier
Connecting the Speakers....................................................................................................................................................13
Mounting the Speakers to a Wall........................................................................................................................................15
Connecting the Video to TV................................................................................................................................................16
P.SCAN(Progressive Scan) Function .................................................................................................................................17
Connecting the Antennas....................................................................................................................................................18
Connecting External Components ......................................................................................................................................19
Before Using Your DVD Player...........................................................................................................................................21
The HT-DB660 comes with a built-in 5.1-channel amplifier, allowing you to enjoy dynamic sound.
Super Digital Sound Master
Equipped with new digital audio technology (auto sound calibration, magic sound
field, and magic headphone) developed in cooperation with DiMagic Co., Ltd., you
will enjoy a more spacious sound wityh better control.
OPERATION
Disc Playback .....................................................................................................................................................................23
Selecting a Disc in the Disc changer ..................................................................................................................................24
Displaying Disc Information ................................................................................................................................................25
Checking the Remaining Time............................................................................................................................................26
Fast/Slow Playback.............................................................................................................................................................27
Skipping Scenes/Songs......................................................................................................................................................28
Repeat Playback.................................................................................................................................................................29
A-B Repeat Playback..........................................................................................................................................................30
Angle Function....................................................................................................................................................................31
Zoom Function....................................................................................................................................................................32
Selecting Audio/Subtitle Language.....................................................................................................................................33
Moving Directly to a Scene/Song........................................................................................................................................34
Using Disc Menu.................................................................................................................................................................35
Using the Title Menu...........................................................................................................................................................36
RRSS (Rear Reflecting Surround System)
The sound from the rear speaker is reflected against the side and rear walls before reaching the
listener to produce realistic sound as if you have installed an actual 5.1-channel speaker system.
Sound Logo
When power is turned on, a sound logo is output from speakers to notify the user that the unit is
optimized for disc playback.
SETUP
Setting the Language..........................................................................................................................................................37
Setting TV Screen type.......................................................................................................................................................39
Setting Parental Controls (Rating Level).............................................................................................................................41
Setting the Password..........................................................................................................................................................43
Setting the Wallpaper..........................................................................................................................................................45
Setting the Speaker Mode ..................................................................................................................................................47
Setting the Test Tone..........................................................................................................................................................48
Setting the Delay Time........................................................................................................................................................49
Setting the Audio Quality ....................................................................................................................................................51
Setting the DRC (Dynamic Range Compression)...............................................................................................................53
Dolby Pro Logic II Mode......................................................................................................................................................55
Dolby Pro Logic II Effect .....................................................................................................................................................56
Setting the RRSS(Rear Reflecting Surround System)........................................................................................................57
Rear Reflecting Surround System ......................................................................................................................................59
Live Surround Mode ...........................................................................................................................................................60
SURR. PLUS / Virtual Headphone......................................................................................................................................61
SUPER 5.1..........................................................................................................................................................................62
TV Screen Saver Function
The HT-DB660 automatically brightens and darkens the brightness of the TV screen after 2 minutes
in the stop or pause mode.
Power Saving Function
The HT-DB660 automatically shuts itself off after 20 minutes in the stop or pause mode.
Customized TV Screen Display
The HT-DB660 allows you to select your favorite image during JPEG, DVD, or VCD playback and set
it as your background wallpaper.
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................63
Presetting Stations..............................................................................................................................................................64
Auto Sound Calibration
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................65
Operating the TV with the Remote Control.........................................................................................................................67
Before Calling for Service ...................................................................................................................................................69
Cautions on Handling and Storing Discs ............................................................................................................................71
Specifications......................................................................................................................................................................72
Notes on Terminology.........................................................................................................................................................73
Warranty .............................................................................................................................................................................74
By setting the auto sound calibration function just once when you relocate or install the unit, you can
have the unit automatically recognize the distance between speakers, levels between channels, and
frequency characteristics to create a 5.1-channel sound field optimized for the listener's environment.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
Disc Recording Format
V I D E O
CD-R Discs
Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
•
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
~
1
6
Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
•
•
•
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
CD-R MP3 Discs
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
•
Disc Type
Mark (Logo)
Recorded Signals
Audio + Video
Disc Size
Max. Playing Time
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
Only files with the ".mp3" and ".MP3" extensions can be played.
Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc,
the disc can be played only up to the blank segment.
•
•
•
•
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5"
DVD
V I D E O
3 1/2"
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
COMPACT
•
•
5"
74 min.
20 min.
74 min.
20 min.
Audio + Video
Audio
VIDEO-CD
AUDIO-CD
DIGITAL VIDEO
3 1/2"
5"
COMPACT
•
•
DIGITAL AUDIO
3 1/2"
DIGITAL
SOUND
STEREO
NTSC
What is MP3?
Dolby Digital
disc
DTS disc
Digital Audio
disc
Stereo disc
NTSC video format
NTSC is used in all of North
America, the Philippines,
South Korea and Japan.
MP3 disc
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts
Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3
format to record about 12 times the usual amount of data on a regular CD.
Do not use the following types of disc!
CD-R JPEG Discs
LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
•
•
Only files with the ".jpeg" and ".JPEG" extensions can be played.
•
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the
•
•
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
•
•
disc can be played only up to the blank segment.
Copy Protection
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
•
•
Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
•
•
•
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
—Front Panel—
External Digital Component Input
Connector
—Rear Panel—
Use this to connect external equipment
capable of digital output.
Open/Close button
Direct Play button
Disc Tray
Power (
Standby indicator
Function button
) button
FM Antenna
Connector
External Audio Component
Input Connector
AM Antenna
Connector
Video Output Connector
Connect the TV's video input jacks
Rear Reflecting Surround System
(VIDEO IN) to the VIDEO OUT connector.
SURROUND button /
Virtual Headphone button
Disc Change button
External Video Component
Input Connectors
COMPONENT VIDEO
Volume control
OUTPUT/INPUT jacks
Connect a TV with component
video inputs to these jacks.
Headphone Jack
5.1 Channel Speaker
Output Terminals
Live Surround Mode button
Tuning Up & Skip ( ) buttons
Play/Pause ( ) button
RRSS MIC Input Jack
S-Video Output Connector
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
Stop ( ) button
Tuning Down & Skip (
) buttons
Accessories
PRO LOGIC indicator
DOLBY DIGITAL indicator
P.SCAN indicator
REPEAT indicator
DISC indicator
5.1CH indicator
DISC(1~5) indicator
PRGM indicator
CHAPTER indicator
SURROUND indicator
TITLE indicator
TUNER indicator
DSP indicator
Remote Control
(AH59-01225H)
Audio Cable / Video Cable
(AH39-40001U) / (AH39-40001V)
FM Antenna
(AH42-00004A)
EX
SURROUND
PRGM
CHAP TUNED
A
B REPEAT
1
5.1
CH
CMX
ST
TITLE
TITLE PBC CHAP
DSP ALL DISC
PRGM RDS RT
TA
L
C
SW
S
R
LINEAR PCM
kHz
MHz
LS
RS
PBC
RRSS Microphone
(AH59-01183D)
User's Manual
(AH68-01328R)
AM Antenna
(AH42-20001P)
PBC indicator
LINEAR PCM indicator
System Status Display
RADIO FREQUENCY
indicator
SPEAKER indicator
DTS Disc indicator
Speaker Bracket
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Insert Remote Batteries
—Remote Control—
TV indicator
TV DVD RECEIVER
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
cover.
1
2
3
DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
DVD RECEIVER indicator
MODE button
OPEN/CLOSE
TV/VIDEO
DIMMER
MODE
DISC SKIP button
AUX button
Stop button
DISC SKIP
TUNER
BAND
AUX
TUNER BAND button
PL II MODE
PL II EFFECT
SLOW
MO/ST
PL II EFFECT button
PL II MODE button
SLOW, MO/ST button
LSM +
RRSS
LSM –
Live Surround Mode –, + button
RRSS button
DVD
Play/Pause button
TUNING/CH
VOLUME
Tuning Preset/CD Skip button
SURR.
PLUS
SURR. PLUS button /
SUPER 5.1
SUPER 5.1 button
Virtual Headphone button
V-H/P
TUNING/CH button
VOLUME button
MENU button
INFO button
MUTE button
Follow these precautions to avoid leaking or cracking cells:
Caution
RETURN button
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
Use the correct type of batteries.Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
•
•
•
•
ENTER
Direction/Enter button
TEST TONE button
Do not expose batteries to heat or flame.
TEST TONE
Number(0~9) buttons
SOUND EDIT
SOUND EDIT button
TUNER
MEMORY
Range of Operation of the Remote Control
P.SCAN
TUNER MEMORY, P.SCAN button
To open the remote control cover, push the
top of the cover, then slide downward.
SLEEP
CANCEL
ZOOM
SLEEP button
LOGO button
ZOOM button
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
EZ VIEW
REMAIN
LOGO
REPEAT
CANCEL button
REMAIN button
REPEAT button
EZ VIEW button
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connect the front/rear, center, and subwoofer speakers to the speaker terminals on the back of the main unit.
•
Front/Rear Speaker (L)
Front/Rear Speaker (R)
Center Speaker
Green
Purple
White
Red
Subwoofer
Back of the Main Unit
Blue
Gray
Back of the Speaker
Back of the Main Unit
Position of the DVD Player
Selecting the Listening Position
Press down the terminal
Insert the black wire into the
back terminal (–) and the gray
wire into the gray (+) terminal,
and then release the tab.
Connect the wires to the output jacks of
the same color on the back of the main
1
2
3
tab on the back of the
speaker.
Place it on a stand or cabinet shelf, or under
the TV stand.
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
•
unit, making sure that the polarity (+/–)
is correct.
Example: Connect the center speaker's green
wire to the center speaker output jack
(green) on the back of the main unit.
LS RS
L
R
Front/Rear Speakers
/
Black
Gray
C
Center Speaker
Place these speakers in front of your listening
•
•
•
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
It is best to install it at the same height as the front
speakers.
•
You can also install it directly over or under the TV.
•
SW
Subwoofer
Caution
Note
The position of the subwoofer is not so critical.
Place it anywhere you like.
Usually, it is placed by a corner near the front speakers.
•
If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. In this case, place the speaker
away from your TV set.
Do not let children play with the speakers.
They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers,
make sure that the polarity (+/) is correct.
Never touch the speaker terminal while the power is on.
Doing so may result in a risk of electric shock.
•
•
•
•
•
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Speakers to a Wall
Connecting the Video to TV
Attach the wall bracket holders (A) to the wall and fasten the holder
screws (B) as shown in the illustration.
1
2
For an optimal sound field, the distance between the speakers should be 40 inches, and each
speaker should be at least 20 inches away from the side wall.
•
B
T V
A
If the wall is concrete, purchase and use anchor bolts.
•
Check the left and right speakers, fasten the speaker to the bracket (C)
using the fixing screw (D), and then insert the bracket into the holder as
shown in the illustration. (Insert the speaker cords before inserting the
bracket into the holder.)
TV
Component
Video
Composite
Video
S-Video
Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.
*
C
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your television.
D
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Complete the speaker setup as shown in the illustration.
3
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
T V
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signals. See page 17 to select Progressive Scan.
•
Left Speaker
Right Speaker
Note
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
P.SCAN(Progressive Scan) Function
Connecting the Antennas
Unlike a regular Interlace Scan in which two fields of picture information are alternated to
create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one
field of information (all lines displayed in one pass) to create a clear and detailed picture
without visible scan lines.
FM Antenna (supplied)
Hold the P.SCAN button down for longer than 1 second.
The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held
down for a minimum of 1 second.
•
The previous mode is indicated in the display first, followed by the selected mode in about a second.
•
AM Loop Antenna
(supplied)
Snap the tabs on the loop
What is Progressive (or Non-Interlaced) Scanning?
into the slots of the base to
assemble the AM loop
antenna.
1
2
3
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
If AM reception is poor, connect an outdoor AM
antenna(not supplied).
FM antenna connection
AM(MW) antenna connection
Connect the FM antenna supplied to the
FM 75Ω COAXIAL terminal as a
temporary measure.
Connect the AM loop antenna supplied
to the AM and
terminals.
1
2
1
2
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second each.
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
As opposed to the interlaced scanning process by which a
video image is drawn in a series of passes, you get an
entire image drawn at one time.
The progressive scanning method is desirable for dealing
with moving objects. A camera that has the ability to
capture moving objects is called a "full frame shutter
camera".
Slowly move the antenna wire around
until you find a location where reception
is good, then fasten it to a wall or other
rigid surface.
If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
The interlaced scanning method is intended for capturing
a still object.
Cooling Fan
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
Note
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive
Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)
Depending on the brand and model of your TV, this function may not work.
•
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
•
•
This unit only outputs 480i and 480p in progressive scan mode.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector),
disconnect the supplied FM antenna.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Components
Connecting an External Digital Component
Connecting an External Analog Component
Example: Digital signal components such as a DVD or CD Recorder.
Example: Analog signal components such as a VCR, Camcorder, and TV.
Optical Cable
(not included)
Audio Cable
If the external
analog component
has only one Audio
Out, connect either
left or right.
Video Cable
R
L
VIDEO OUT
VIDEO OUT DIGITAL OUT
VIDEO IN
VIDEO IN
Connect Video Out on the DVD player to Video In on the TV.
Connect Video Out on the DVD player to Video
In on the TV.
1
2
3
1
2
Note
If you have connected an external digital
component and Video In (1, 2) at the
same time, there will be video from AUX 1
even when you select DIGITAL IN.
•
Connect Video In on the DVD player to Video
Out on the external analog component.
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
Connect Audio In on the DVD player to Audio Out
on the external analog component.
3
4
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
•
Press AUX on the remote control to select ‘DIGITAL IN’.
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•
Be sure to match connector colors.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
•
Press AUX on the remote control to select AUX 1
or AUX 2.
Each time the button is pressed, the selection changes as
follows: DIGITAL IN AUX 1 AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝
•
AUX1 ➝ AUX2 ➝ FM ➝ AM.
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
Press the MODE button so
that the TV indicator on the
remote control flashes.
Plug the power cord into the
AC power supply.
Press the POWER button to
1
2
5
3 turn on the TV.
TV DVD RECEIVER
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
Press FUNCTION button on
the main unit to select
DVD/CD mode.
Press TV/VIDEO button to
select VIDEO mode.
4
6
TV DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
TV Broadcast System
Press MODE button.
This device is designed to work with the NTSC video format.
•
For normal playback, the video format a DVD disc is recorded in
must coincide with your TV's video format.
•
Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.
•
•
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs.
See page 67 for more information on the operation of the remote control.
•
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Playback
Selecting a Disc in the Disc changer
The DVD/CD function is automatically selected when Disc Skip is pushed.
Press OPEN/CLOSE button to open the
disc tray.
To select a specific disc, press the corresponding DIRECT
PLAY (1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP
on the remote control, until the required disc indicator flashes.
1
2
3
4
Load one or more discs.
All the discs will be played in turn, starting with the one selected.
•
Place a disc gently into the tray with the disc’s label
•
facing up.
Press DISC SKIP button.
Rotate the carousel tray so you can load the third, fourth,
and fifth discs.
•
If you wish to play the current disc only, press REPEAT on the remote
control one or more times, until “REPEAT : DISC” is displayed.
Close the compartment by pressing the
OPEN/CLOSE button again.
If the disc selected is not loaded, the next disc is played automatically.
DVD
VCD
CD
Playback starts automatically.
•
MP3
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
Playback starts automatically.
•
•
My love
If the TV is on, a list of MP3s on
the CD will appear on the TV
screen.
Uptown girl
To temporarily pause playback,
press PLAY/PAUSE during playback.
To stop playback,
press STOP during playback.
If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory.
•
To resume playback, press PLAY/PAUSE
button again.
•
If PLAY/PAUSE (
) button or ENTER button is
Depending on the content of the disc, the initial screen may appear different.
Depending on the recording mode, some MP3-CDs cannot be played.
Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, “STOP” is displayed, and if
•
•
•
Note
•
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information
Checking the Remaining Time
You can view playback information on the disc on the TV screen.
Press INFO button.
Press the Remain button.
Each time the button is pressed, the display changes as follows:
•
For checking the total and remaining time of a title or chapter
being played.
•
DVD
VCD
CD
MP3 JPEG
Each time the Remain button is pressed
DVD RECEIVER
SMART NAVI
Something like you
Back for good
DVD
VCD
CD
Love of my life
More than words
TRACK ELAPSED
TRACK REMAIN
TOTAL ELAPSED
TOTAL REMAIN
TITLE ELAPSED
Display disappears
Display disappears
TITLE REMAIN
CHAPTER ELAPSED
CHAPTER REMAIN
Display disappears
What is a Title?
•
•
A movie contained in a DVD disc.
Note
What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
Depending on the disc, the disc
information display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
•
•
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
•
•
What is a Track (File)?
A section of video or a music file recorded on a VCD, CD, or MP3-CD.
Screen Display
DVD display
VCD display
CD display
MP3 CD display
TRACK (FILE) display
ELAPSED TIME display
REPEAT PLAYBACK display
AUDIO LANGUAGE display
SUBTITLE display
DOLBY DIGITAL display
TITLE display
ANGLE display
CHAPTER display
STEREO (L/R) display
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast/Slow Playback
Skipping Scenes/Songs
DVD
VCD
MP3
DVD
VCD
CD
MP3
Fast Playback
Briefly press
.
Press and hold
.
Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will
•
Each time the button is held down during playback,
•
be played.
the playback speed changes as follows:
But, you cannot skip chapters consecutively.
•
DVD
VCD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
Slow Playback
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Press SLOW button.
Something like you
Back for good
Love of my life
More than words
I need you
Each time the button is pressed during playback,
•
My love
Uptown girl
the playback speed changes as follows:
DVD
VCD
When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
•
will skip back or forward 5 minutes.
Note
During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
No sound is heard during slow playback and step motion playback.
•
•
Reverse slow playback does not work with VCDs.
•
Note
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Playback
A-B Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
CD
MP3
JPEG
DVD
VCD
CD
Press Cursor
to move to REPEAT
PLAYBACK display.
button
Press REPEAT button.
Press INFO button
twice.
Each time the button is pressed during playback, the repeat playback mode changes as follows:
•
1
2
DVD
MP3 JPEG
For a VCD or CD, press INFO
button once.
•
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
RANDOM
Press Cursor
,
Plays tracks in random order.
(A track that has already been played may
be played again.)
Press ENTER
buttons to select ‘A-’ and then
press ENTER button at the
beginning of the segment.
button at the end
of the segment.
3
4
TRACK
Repeatedly plays the selected track.
VCD
CD
FOLDER
When ENTER button is pressed,
the selected position will be stored in
memory.
•
The specified segment will be played
repeatedly.
•
Repeatedly plays all tracks in the selected
folder.
A -
A - B
DISC
REPEAT : A—B
Repeatedly plays the entire disc.
OFF
A -?
Cancels Repeat Playback.
REPEAT : A—
To Select a Repeat Playback Mode in the Disc Information Screen
To return to normal playback, press Cursor
,
DVD
Press INFO button twice.
Note
1
2
buttons to select
OFF.
Press Cursor button
to move to REPEAT
PLAYBACK display.
Repeat playback operation is
not possible with version 2.0
VCD discs if PBC is turned
on. To use Repeat Playback
on a VCD with PBC, you
•
Press Cursor button
to select the desired
Repeat Playback mode.
Note
3
VCD
CD
should set the PBC to OFF in
the disc menu. (See page 35.)
The A-B Repeat function will not work on an MP3 or JPEG disc.
•
Press ENTER button.
4
For MP3 and JPEG discs, you cannot select Repeat
Play from the information display screen.
*
29
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Angle Function
Zoom Function
This function allows you to view the same scene in different angles.
This function allows you to enlarge a particular area of the displayed image.
DVD
DVD
VCD
Zoom (Screen Enlarge) Function
Press Cursor
button to move to
ANGLE display.
Press Cursor , ,
Press ENTER
button.
Press ZOOM
button.
, buttons to
Press INFO button.
1
2
move to the area
you want to enlarge.
1
2
3
Each time the button is pressed, the
zoom level changes as follows:
•
1/3
1/3
ENTER SELECT
Press Cursor
,
buttons or numeric buttons
to select the desired angle.
3
DVD
Aspect Ratio
Each time the button is pressed, the angle changes as follows:
•
1/3
Press EZ VIEW button.
2/3
3/3
Each time the button is pressed, the zoom function will switch between On
and Off.
When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
•
•
EZ VIEW OFF
The Angle function works only with discs on which multiple angles have been recorded.
Note
•
Note
This function will not work if the DVD is recorded with multi-camera angle format.
Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
•
•
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving Directly to a Scene/Song
Selecting Audio/Subtitle Language
DVD
Audio Language Selection Function
DVD
VCD
CD
Moving to a Title/Track
Moving to a Chapter
Press Cursor
,
buttons
Press Cursor ,
buttons to move to
Chapter display.
Press Cursor
,
Press INFO button
twice.
or numeric buttons to select
the desired title/track and then
press ENTER button.
buttons or numeric
Press INFO button.
buttons to select the
desired audio language.
1
1
1
2
2
3
Depending on the number of languages on a
DVD disc, a different audio language (KOREAN,
ENGLISH, JAPANESE, etc.) is selected each
time the button is pressed.
•
01/05
001/040
0:00:01
1/1
01/05
001/040
0:00:37
1/1
03/05
001/002
0:00:01
1/1
EN 2/3
JA 3/3
Moving to a Chapter
Moving to a Specific Time
Press Cursor
Moving to a Specific Time
Press the numeric
buttons to select the
DVD
Press Cursor
,
buttons
Subtitle Language Selection Function
,
or numeric buttons to select
the desired chapter and
then press ENTER button.
buttons to move to
time display.
desired time and then
4
5
6
press ENTER button.
Press Cursor
Press INFO button
twice.
button to move to
2
SUBTITLE display.
01/05
025/040
0:00:01
1/1
01/05
025/040
1:17:30
1/1
01/05
028/040
1:30:00
1/1
MP3 JPEG
Press Cursor
button or numeric
buttons to select the
desired subtitle.
Note
Press the numeric
buttons.
3
You can press
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
on the remote
•
•
KO 1/3
KO 01/ 03
OFF
The selected file will be played.
An MP3 or JPEG disc cannot be moved
from the disc information screen.
•
•
EN 02/ 03
JA 03/ 03
OFF / 03
Depending on the disc,
the Subtitle and Audio
Language functions
may not work.
•
Note
When playing an MP3 or JPG disc, you
•
cannot use
To move a folder, press (Stop) and
then press
,
to move a folder.
,
.
33
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Disc Menu
Using the Title Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
DVD
Press Cursor
,
Press Cursor ,
button to move to
‘Title Menu’.
Press ENTER
button.
Press MENU
button.
Press MENU
button.
buttons to move to
1
2
•
‘DISC MENU’ and then
press ENTER button.
2
3
•
1
When playing a VCD (version 2.),
this toggles between PBC ON and
OFF.
When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
•
The title menu appears.
Press Cursor , ,
, buttons to
select the desired
item.
Press ENTER
button.
3
4
Press MENU button to exit the setup screen.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be
disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
35
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Language
OSD language is set to English by default.
Press Cursor
,
Press Cursor
button to select the
desired language and then
press ENTER button.
,
Press Cursor
Press ENTER
button.
Press MENU
button.
button to select the
desired item and then
press ENTER button.
button to move to
‘Setup’ and then
press ENTER button.
1
2
3
4
5
•
Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Selecting the
OSD Language
Selecting the
Audio Language
Selecting the
Subtitle Language
Selecting the Disc Menu
Language (recorded on the disc)
(recorded on the disc)
(recorded on the disc)
If the language you selected is
not recorded on the disc, menu
*
language will not change even
if you set it to your desired
language.
37
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting TV Screen type
Adjusting the TV Aspect Ratio (Screen Size)
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Press MENU button.
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
1
2
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a widescreen TV.
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
•You can enjoy the widescreen aspect.
WIDE
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
•Black bars will appear at the top and bottom of the screen.
4:3LB
(4:3 Letterbox)
Press Cursor
,
Press Cursor
button to select the
desired item and then
press ENTER button.
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
3
4
4:3PS
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
•You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
(4:3 Pan&Scan)
Once the setup is complete, you will
be taken to the previous screen.
•
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Note
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
39
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
Press Cursor
Press Cursor
buttons to select the
desired rating level and
then press ENTER button.
,
Press Cursor
button to move to
‘Setup’ and then
Enter the password
and then press
ENTER button.
button to move to
‘PARENTAL’ and then
press ENTER button.
Press MENU button.
1
2
3
4
5
press ENTER button.
The password is set to "7890" by default.
Once the setup is complete, you will be
taken to the previous screen.
If you have selected Level 6, you
cannot view DVDs with Level 7 or
higher.
•
•
•
The higher the level, the closer the
content is to violent or adult material.
•
This function works only if a DVD disc contains rating level information.
Note
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
41
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Password
You can set the password for the Parental (rating level) setting.
Press Cursor
button to
Press Cursor
Press ENTER
button.
Enter the password
and then press
ENTER button.
move to ‘PASSWORD’
and then press ENTER
button.
button to move to
‘Setup’ and then
press ENTER button.
Press MENU button.
1
2
3
4
5
Enter the old password, a new
password, and confirm new password.
The setting is complete.
•
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Wallpaper
JPEG
DVD
VCD
While watching a DVD, VCD, or JPEG CD, you can set an image you like as background wallpaper.
During playback, press
Press Cursor
Press Cursor
Press LOGO
button.
PLAY/PAUSE button
button to move to
‘Setup’ and then
press ENTER button.
button to move to
‘LOGO’ and then
press ENTER button.
Press MENU button.
when the image you
like comes up.
1
2
3
8
4
5
"LOGO COPYING" will be displayed on the
TV screen followed by "LOGO COPIED".
•
LOGO COPYING
PAUSE
PAUSE
Press Cursor
Press MENU
Press RETURN button to return to the previous level.
Press OPEN/CLOSE
button to open and then
close the disc tray.
button to move to
‘USER’ and then
press ENTER button.
button to exit the
6
7
setup screen.
Press MENU button to exit the setup screen.
JPEG
DVD
VCD
To Change the Wallpaper
During playback, press
PLAY/PAUSE button when
you see an image you like.
Press LOGO button.
1
Press OPEN/CLOSE
button to open and then
close the disc tray.
3
2
"LOGO COPYING" will be displayed
•
on the TV screen followed by
"LOGO COPIED".
The wallpaper is changed.
•
Select this to set the
Samsung Logo image as
your wallpaper.
Select this to set the desired
image as your wallpaper.
LOGO COPYING
PAUSE
PAUSE
45
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Speaker Mode
Setting the Test Tone
Press Cursor
Press Cursor
Press Cursor
button
button to move to
button to move to
to move to ‘TEST
TONE’ and then press
ENTER button.
Press MENU button.
Press MENU button.
‘Audio’ and then
press ENTER button.
‘Audio’ and then
press ENTER button.
1
3
2
1
2
3
The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the button is pressed again at this
time, the test tone will stop.
•
Press Cursor
,
,
In the Speaker
Setup, press the
ENTER button again.
,
buttons to move
to the desired
4
speaker and then
press ENTER button.
For C, LS, and RS, each time the button
is pressed, the mode switches
Press RETURN button to return to the previous level.
•
•
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
Press MENU button to exit the setup screen.
L: Front Speaker (L)
R: Front Speaker (R) LS: Rear Speaker (L)
C: Center Speaker
SW: Subwoofer
RS: Rear Speaker (R)
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
When manually testing using the TEST TONE button
Press TEST TONE button.
Multi-Channel Pro Logic Mode
Test tone will be produced as follows:
•
Note
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
With
mode.
(Dolby Pro Logic II), the delay time may be different for each
•
•
Start
correctly connected and that there is no problem.
With AC-3 and DTS, the delay time is set between 00 and 15mSEC.
Depending on PRO LOGIC and STEREO, the speaker mode may vary.
•
•
To end the test tone,
47
48
press TEST TONE button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Delay Time
Press Cursor
,
,
Press Cursor button
Press Cursor
button
Press Cursor ,
to set the Delay
time
,
buttons to move
to move to ‘Audio’ and
2then press ENTER
button.
to move to ‘DELAY
TIME’ and then press
ENTER button.
Press MENU button.
to the desired
speaker and then
press ENTER button.
1
3
4
5
You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
•
•
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise, change the setting according to
the table.
Setting up the Speaker Delay Time
Ideal CENTER
SPEAKER placement
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center and Surround Speakers.
Distance between Df and Dc
Delay Time
20 Inches
40 Inches
5 feet
1.3 ms
2.6 ms
3.9 ms
5.3 ms
6 feet 6.6 inches
•
Setting REAR (SURROUND) SPEAKERS
Ideal
SURROUND
SPEAKER
placement
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
It is desirable to place all speakers within this circle.
Delay Time
Distance between Ds and Dc
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
6 feet 6.6 inches
13 feet 3.3 inches
20 feet
5.3 ms
10.6 ms
15.9 ms
49
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 2
Method 1
When adjusting the audio quality using the setup screen
When manually adjusting with the SOUND EDIT button
Adjusting Front Speaker Balance
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
Press MENU button.
Press SOUND
EDIT button and
Press SOUND
1
2
Press SOUND
EDIT button and
EDIT button and
then press Cursor
then press Cursor
1
2
3
then press Cursor
, .
, .
,
.
ST
ST
ST
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
kHz
MHz
kHz
MHz
Adjusting Rear Speaker Level
Adjusting Subwoofer Speaker Level
Press Cursor
button
Press Cursor
,
,
,
to move to ‘SOUND
buttons to select and
Press SOUND
Press SOUND
3 EDIT’ and then press 4 adjust the desired item and
EDIT button and
EDIT button and
ENTER button.
then press ENTER button.
then press Cursor
then press Cursor
4
5
, .
, .
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
kHz
MHz
Note
Adjusting Front/Rear Speaker Balance
Press RETURN button to return to the previous level.
You can select between 00 and –06 and OFF.
•
•
The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
Press MENU button to exit the setup screen.
The volume level can be adjusted in steps from +6dB to –6dB.
•
The sound gets louder as you move closer to +6dB and smaller as you get closer to -6dB.
•
51
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
Press Cursor
button to move to
‘Audio’ and then
Press Cursor
Press Cursor
to adjust
the ‘DRC’.
Press MENU
button.
button to move to
‘DRC’ and then press
ENTER button.
,
1
2
3
4
press ENTER button.
The longer the Cursor
button is held
down, the greater the effect, and the
longer Cursor button is held down,
the smaller the effect.
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
53
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic II Mode
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
You can select the desired Dolby Pro Logic II audio mode.
Press
and then press Cursor
buttons to select the mode.
PL II EFFECT button
Press
PL II MODE
Press
PL II MODE button.
,
button to select ‘MUSIC’
mode.
1
3
2
Each time the button is pressed, the mode changes as follows.
•
You can select either 0 or 1.
•
LINEAR PCM
ST
LINEAR PCM
ST
DSP TITLE PBC CHAP PRGM RDS RT
CMX
TA
TUNED
DSP TITLE PBC CHAP PRGM RDS RT
CMX
TA
TUNED
LINEAR PCM
ST
ST
ST
ST
ST
DSP TITLE PBC CHAP PRGM RDS RT
CMX
TA
TA
TA
TA
TA
TUNED
L
C
R
L
C
R
L
C
R
SW
kHz
MHz
SW
SW
kHz
MHz
kHz
MHz
LS
RS MPEG-2 AAC MPEG
LS
RS MPEG-2 AAC MPEG
LS
RS MPEG-2 AAC MPEG
LINEAR PCM
DSP TITLE PBC CHAP PRGM RDS RT
TUNED
L
C
R
SW
CMX
RS MPEG-2 AAC MPEG
kHz
MHz
LS
LINEAR PCM
ST
DSP TITLE PBC CHAP PRGM RDS RT
CMX
TA
TUNED
L
C
R
SW
kHz
MHz
LS
RS MPEG-2 AAC MPEG
LINEAR PCM
DSP TITLE PBC CHAP PRGM RDS RT
TUNED
L
C
SW
S
R
CMX
RS MPEG-2 AAC MPEG
kHz
MHz
LS
Press
and then press Cursor
buttons to select the mode.
PL II EFFECT button
Press
and then press Cursor
buttons to select the mode.
PL II EFFECT button
LINEAR PCM
DSP TITLE PBC CHAP PRGM RDS RT
TUNED
L
C
R
SW
CMX
RS MPEG-2 AAC MPEG
kHz
MHz
LS
,
,
4
LINEAR PCM
DSP TITLE PBC CHAP PRGM RDS RT
TUNED
L
C
R
SW
CMX
RS MPEG-2 AAC MPEG
kHz
MHz
LS
You can select between 0 and 7.
You can select between 0 and 6.
•
•
LINEAR PCM
ST
LINEAR PCM
ST
DSP TITLE PBC CHAP PRGM RDS RT
CMX
TA
TUNED
DSP TITLE PBC CHAP PRGM RDS RT
TA
TUNED
L
C
R
L
C
R
SW
SW
kHz
CMX
RS MPEG-2 AAC MPEG
kHz
MHz
MHz
LS
RS MPEG-2 AAC MPEG
LS
Note
When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
•
Note
When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected
•
automatically and
(Dolby Pro Logic II) button does not work.
PRO LOGIC II
PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers produce
phantom sound.
•
•
•
MUSIC: When listening to music, you can experience sound effects as if you are listening to the
•
actual performance.
CINEMA: Adds realism to the movie soundtrack.
•
•
PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while
DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
using just the front left and right speakers.
MATRIX: You will hear 5.1 channel surround sound.
•
STEREO: Select this to listen to sounds from the front left and right speakers and the
subwoofer only.
Manufactured under license from Dolby Laboratories. “Dolby,”
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 and other world-wide patents issued
and pending. “DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc. ©1996 Digital
Theater Systems, Inc. All rights reserved.
“Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997
Dolby Laboratories, Inc. All rights reserved.
55
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the RRSS(Rear Reflecting Surround System)
By setting up the RRSS function just once, the speaker distance, channel level, and rear sound
reflection effect are automatically set and create an optimal listening environment.
This function works only in DVD/CD mode.
•
•
The following images are for illustrative
purposes only and may differ from the
actual product.
*
Connect the RRSS
Microphone to the
RRSS input jack.
Place the RRSS
Microphone at the
listening position.
1
3
2
Auto Sound Calibration
Microphone
When "REMOVE MIC"
appears on the display,
Press the RRSS
button.
L: Front Speaker (L)
C: Center Speaker
LS: Rear Speaker (L)
R: Front Speaker (R)
SW: Subwoofer
RS: Rear Speaker (R)
4 disconnect the RRSS
Microphone.
A speaker tone will be heard once
from each speaker in the order of
L ➝ C ➝ R ➝ RS ➝ LS ➝ SW, and
then the newly set error tone will be
heard again from L ➝ R.
An optimal listening environment will
be set up automatically.
•
To enable or disable the sound logo
When you turn on the power, a sound logo will be heard,
indicating that the disc reading is completed and the player is
in its optimal condition to play the disc.
To select the RRSS that you have set
Briefly press the RRSS button.
(If you have set the RRSS for the first time according to
Steps 1 to 3 on the previous page)
•
•
It takes about 3 to 4 minutes to
complete the RRSS setup.
1. Press and hold the RRSS button.
Your selection will toggle between "REAR REFLECTING
ON" and "REAR REFLECTING OFF" on the display.
•
"S.LOGO ON" or "S.LOGO OFF" appears on the
display.
•
Select "REAR REFLELTING ON" to listen using the
•
2. Briefly press the RRSS button.
RRSS setting and select "REAR REFLECTING OFF" to
listen to the disc currently being played in its original
setting.
Each time you press the button, your selection toggles
•
between "S.LOGO ON" and "S.LOGO OFF".
Select "S.LOGO ON" to enable the sound logo and
select "S.LOGO OFF" to disable the sound logo.
•
Tone Output
To check the RRSS that you have set
Caution
1. Press and hold the RRSS button twice.
If the system is installed at a location where sound cannot
A piano sound will be heard and the
setup will be completed.
•
"CHECK" appears on the display.
•
be reflected (e.g., an open space without walls), the speaker
distance, channel level, and rear sound reflection effect may
be set incorrectly during the RRSS setup.
2. Next,briefly press the RRSS button.
Note
The speaker distance and level value for each channel
will be displayed.
•
The RRSS button works as the RRSS setup function shown above if the RRSS Microphone is connected, and works as the rear sound
reflection effect function if the microphone is removed.
•
•
If you are installing the system for the first time or if you have initialized the system, "NO MEASURED DATA" will appear on the display
when you press the RRSS button without connecting the RRSS Microphone.
During the RRSS setup, the output volume of the tone is fixed and you cannot use the volume control buttons to adjust the output level.
If you remove the RRSS Microphone during the RRSS setup, the setup will be cancelled.
To cancel the RRSS setup
•
•
•
Press the RRSS button.
The tone output stops, "CANCEL" appears on the
•
Place the front and left speakers (L/R) toward the side walls so that the rear speaker sound is reflected against the walls.
display, followed by "REMOVE MIC", and then the
setup will be cancelled.
57
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Reflecting Surround System
Live Surround Mode
You can use the magic sound field to listen to 2-channel stereo sources in realistic
5.1-channel surround sound.
You can enjoy realistic sound reproduction that approximates 5.1-channel surround
sound using the front speakers.
Each time you press the Live
Surround Mode + button, the mode
display changes in the order shown
below. Each time you press the Live
Surround Mode – button, the mode
display changes in the reverse order.
To cancel the rear
Press the RRSS button
to select "REAR
REFLECTING ON".
Play a Dolby Surround or
2-Channel disc, or listen
to the radio.
sound reflection
1
3
2
1
2
function, press the
RRSS button again to
select "REAR
REFLECTING OFF".
The rear sound reflection function
will be enabled and you can enjoy
the 5.1-channel surround sound.
•
CINEMA : A powerful sound field effect as in a movie theater.
•
STADIUM : A sound field effect of being at a soccer or baseball game.
•
LIVE : A sound field effect with a spatial feeling as in a live concert hall.
•
JAZZ : Select this when listening to jazz.
•
ROCK : Select this when listening to rock music.
•
To cancel the magic sound field
function, press and hold the
Live Surround Mode button on
the main unit for longer than 1
second.
CLASSIC : Select this when listening to classical music.
•
DISCO : A sound field with a powerful bass as in a disco club.
•
SUPER 5.1 : Select this to listen to a 2 channel source in 5.1 channel.
•
•
LSM OFF : If you press the Live Surround Mode button on the main
unit, the mode display will appear on the display in the
same order as pressing the Live Surround Mode +
(LSM) button on the remote control.
What is RRSS?
(RRSS: Rear Reflecting Surround System)
The sound from the front/rear speakers, which are located in the front,
•
is first reflected against the side walls (or the ceiling) and then reflected
against the rear wall before reaching the listener.
It allows you to enjoy the realistic sound reproduction equal to that of a
5.1-channel speaker system using only 3 speakers.
It not only increases space efficiency but eliminates the need for
•
speaker cable arrangement because it does not require installation of
rear speakers.
Note
Depending on the disc being played, the effect of each
sound field may vary.
You cannot select SUPER 5.1 mode when playing a
DVD disc recorded in more than 2 channels.
•
•
59
60
Download from Www.Somanuals.com. All Manuals Search And Download.
SURR. PLUS / Virtual Headphone
SUPER 5.1
The Surround II function works when the headphone is not connected, and the Magic
Headphone function works when the headphone is connected.
You can reproduce 2-channel sources, such as VCDs, CDs, and radio broadcasts,
in realistic 5.1-channel surround sound.
SURROUND PLUS
Enable the Surround plus function if you have installed the system at a location where sound cannot be reflected.
You can create a virtual rear sound image to enjoy realistic sound reproduction that approximates 5.1-channel surround sound.
(When you enable this function, the center speaker does not produce sound and the disc will be reproduced in 4.1-channel.)
To cancel this
Press the SUPER 5.1
Press the SURR. PLUS
button to select the surround
plus function.
To cancel the surround plus
function, press the SURR.
PLUS button again.
function, press the
button to select
1
2
1
2 SUPER 5.1 button to
"SUPER 5.1".
select "SUPER OFF".
A realistic sound very similar to that of a
5.1-channel sound system will be produced.
You can listen in regular stereo.
A 2-channel source will be reproduced
in 5.1 channel.
•
•
•
This function works only with DVDs recorded in more than 2 channels.
The surround plus function does not work with 2-channel sources such as music CDs or MP3 CDs.
•
•
Note
Note
Magic Headphone
If you insert a DVD recorded in more than 2 channels and press the
SUPER 5.1 button, "THIS FUNCTION APPLIES ONLY 2CH SOURCE"
will appear on the display and the function will not work.
•
You can enjoy a realistic sound very similar to that of a 5.1-channel sound system using regular stereo headphones.
To cancel this function,
Press the Virtual Headphone
press the Virtual
Headphone button to select
"VIRTUAL OFF".
button to select "VIRTUAL
ON".
1
2
You can enjoy the feeling of being in the middle of
a concert hall using headphones.
You can listen in a regular 2-channel stereo.
•
•
61
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio
Presetting Stations
You can store up to:
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
15 FM stations
• FM
Frequency Modulation
•
• AM(MW)
Medium Wave
15 AM stations
•
Remote Control Unit
Example: Presetting FM 89.1 in the memory
Press the
Tune in to the
desired station.
Press TUNER/
BAND button.
TUNER(BAND)
button and select
the FM band.
Press the TUNER
MEMORY button.
Press
to
1
2
1
2 select "89.10".
3
When
is pressed, a
The selection toggles back
and forth between "FM" and
"AM" each time the
TUNER(BAND) button is
pressed.
Automatic Tuning 1
•
Each time the button is pressed,
the band switches between
"FM" and "AM".
Refer to Step 2 on page 63 to
automatically or manually tune in
to a station.
“PRGM” flashes in the display.
•
•
•
preset broadcast station is
selected.
Press and hold
automatically search for
to
Automatic Tuning 2
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
active broadcasting stations.
kHz
MHz
kHz
MHz
kHz
MHz
Briefly press
increase or decrease the
frequency incrementally.
to
Manual Tuning
Main Unit
Press the Function
To preset another
station, repeat
steps 2 to 5.
Press
to select preset
number
Select a broadcast
station.
Press the TUNER
MEMORY button.
button to select the
1desired band (FM, AM).
2
4
5
6
Press the STOP (
button to select
)
You can select between 1 and
15.
Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
‘PRGM’ disappears from the display and
the station is stored in memory.
Automatic Tuning 1
•
•
•
PRESET and then press
button to select the preset station.
Press the STOP
to select "MANUAL" and
(
)
button
Automatic Tuning 2
TITLE
CHAP PRGMRDS RT
TUNED
ST
TITLE
PRGMRDS RT
TUNED
kHz
MHz
kHz
MHz
then press and hold
button to
automatically search the band.
Press STOP
MANUAL and then briefly
to tune in to a lower or
(
)
to select
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
To tune in to a preset station, press
remote control to select a channel.
on the
(This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
•
63
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Adjusting Display Brightness
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
Press SLEEP button.
Press DIMMER button.
"SLEEP" will be displayed. Each time the button is pressed
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
•
90 ➝ 120 ➝ 150 ➝ OFF.
Each time the button is press, the brightness changes as
follows: ‘SLIGHTLY DARK © DARK © BRIGHT’.
•
ST
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
The remaining time before the DVD player will shut itself off is displayed.
•
Pressing the button again changes the sleep time from what you have set
•
earlier.
Mute Function
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
This is useful when answering a doorbell or
telephone call.
Press MUTE button.
Tray-Lock Function
This feature allows you to lock the tray in place so that children
cannot pull on it or otherwise damage it.
MUTE ON’ appears in the display.
To restore the sound, press the button again to
select ‘MUTE OFF’.
•
•
‘
With the power on, press and hold the OPEN/CLOSE button
on the main unit for longer than 4 seconds.
•"LOCK" appears on the display and the tray will be locked.
•To disable this function, press and hold the OPEN/CLOSE button on the
main unit for longer than 4 seconds.
"UNLOCK" appears on the display and the Tray-Lock function will be
cancelled.
65
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the TV with the Remote Control
When operating the TV with the remote control
TV Brand Code Number
No.
No.
Brand
SAMSUNG
ANAM
Code
Brand
BRANDT
Code
Press the MODE button on the remote
1
00(InitialValue), 01, 02, 03, 04, 05, 73 30
41
control to make the TV indicator flash.
FERGUSON
PIONEER
TELEAVA
FINLUX
2
06~11, 59
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
41
TV DVD RECEIVER
1
DAEWOO
LG
3
12~18, 20, 21
41, 48, 74
41
4
05, 20, 21, 22, 53
HITACHI
JVC
5
23, 40, 41, 49
05, 42, 47
31
FISHER
6
24, 55
Press POWER button to turn on the TV.
SHARP
AKAI
7
27, 33, 34, 35, 54
31
2
SONY
YOKO
8
27, 36
05
TOSHIBA
SANYO
PHONOLA
RADIOLA
SCHNEIDER
NEWSAN
CONTINENTAL EDISON
SALORA
9
27, 37, 42, 43, 44, 46
05, 45, 47
05, 45
05
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
27, 30, 31, 32
MITSUBISHI
MATSUSHITA
TELEFUNKEN
RCA
05, 27, 28
Point the remote control toward the TV.
09, 26
58
3
41, 49, 51, 57
49
29, 61
48
PANASONIC
SABA
SELECO
07, 09, 26, 48, 49, 50
48
While holding down POWER, enter the code
corresponding to your brand of TV.
NOKIA
40, 41, 47, 48, 49
48
PHILIPS
REX
05, 45, 47, 64, 65, 66, 67, 68, 69
48
4
GRUNDIG
ZENITH
MIVAR
39, 42, 46, 70, 71, 72
46
IMPERIAL
CGE
38
46
If the code matches the TV's code, the TV will be turned off.
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
•
•
MIVAL
52
46
NOBLEX
EMERSON
MAGNAVOX
LOEWE
BANG & OLUFSEN
BRIONVEGA
FORMENTI
METZ
56
47
19
25
47
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
47
05, 60
47
THOMSON
NORDMENDE
LOEWE OPTA
BLAUPUNKT
SIEMENS
WEGA
40, 41, 49, 62, 63
40, 41, 49
36, 47, 05
39
47
RADIOMARELLI
SINGER
47
Pont the remote control toward the TV and press
POWER. If the TV turns off or on, the setting is
complete.
47
SINUDYNE
5
47
39
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
•
Note
The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
•
If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
•
67
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
Symptom
Check/Remedy
Is the power cord plugged securely into the outlet?
Turn off the power and then turn it back on.
Did you enable the Tray-Lock function?
To disable this function, press and hold the OPEN/CLOSE button
on the main unit for longer than 4 seconds while the power is on.
•
•
•
Is the TV power on?
•
•
•
•
•
• Disc is rotating but no
picture is produced.
Disc tray does not open.
Are the video cables connected properly?
Make sure that the disc is not a PAL- disc.
Is the disc dirty or damaged?
• Picture quality is poor
and picture is shaking.
A poorly manufactured disc may not be playable.
Check the region number of the DVD.
•
•
•
Is the remote control being operated within its operation range of
angle and distance?
Are the batteries exhausted?
Have you select the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
•
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Playback does not start.
The remote control does
not work.
•
•
Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
Are you using a deformed disc or a disc with scratches on
the surface?
Wipe the disc clean.
•
•
Audio language and
Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
•
subtitles do not work.
Menu screen does not appear even
when the menu function is selected.
Are you using a disc that does not contain menus?
•
•
No sound is heard during fast playback, slow playback, and step
motion playback.
•
•
•
•
Sound is not produced.
Are the speakers connected properly? Is the speaker setup
correctly customized?
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Aspect ratio cannot be
changed.
Is the disc severely damaged?
When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Sound can be heard only
from a few speakers and
not all six.
Is the antenna connected properly?
If the antennas input signal is weak, install an external FM antenna
in an area with good reception.
•
•
Can't receive radio
broadcast.
•
•
•
The main unit is not working.
Turn off the power and hold the
longer than 5 seconds.
button on the main unit for
•
(Example: The power goes out or
•
sTthraengDeVnoDispe lisayheearrdis.) not
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Picture does not appear, sound
is not produced, or the disc tray
opens 2 to 5 seconds later.
Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
•
working normally.
While “NO DISC” message appears on the display of main unit,
hold the main unit's
“INITIAL” appears on the display and all settings will return to the
default values.
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
button for longer than 5 seconds.
The password for rating
level has been forgotten.
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
•
•
Dolby Digital 5.1 CH
Surround Sound is not
produced.
•
69
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions on Handling and Storing Discs
Specifications
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
G
E
N
E
R
A
L
160W
Power Consumption
Weight
23 Ib
Handling discs
17 x 3.7 x 16 inches
41°F ~ 95°F
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
10% ~ 75%
T
U
N
E
R
10dB
60dB
Do not stick paper or tape on the disc.
F
M
0.5%
Distortion
54dB
T
Usable Sensitivity
S/N Ratio
A
M
U
N
E
R
40dB
2%
Distortion
Y:1.0Vp-p(75Ω load), Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Luminance Signal: 1.0Vp-p(75Ω load)
Color Signal: 0.286Vp-p(75Ω load)
80W(6Ω)/CH
80W(6Ω)
80W(6Ω)/CH
100W(3Ω)
20Hz~20KHz
VIDEO
INPUT
Disc Storage
Component Video
Composite Video
Keep in a clean
Protection jacket.
Store vertically.
O
V
Keep in a cool
ventilated area
Do not keep in
direct sunlight
U
I
Component Video
T
D
P
E
U
O
T
S-VIDEO
A
M
P
L
I
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
Do not allow the discs to become contaminated with dirt.
Do not load cracked discs or discs that are scratched.
Caution
•
•
F
I
75dB
S/N Ratio
50dB
E
R
Channel separation
Input sensitivity
(AUX)500mV
Handling and Storing Discs
5.1ch speaker system
Speaker system
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
Front/Rear/Center speaker
Subwoofer speaker
Impedance
6Ω
3Ω
S
P
E
A
K
E
R
Frequency range
Output sound pressure level
Rated input
100Hz~20kHz
88dB/W/M
80W
40Hz~200Hz
86dB/W/M
100W
When cleaning, wipe gently from the inside to the outside of the disc.
•
Maximum input
160W
200W
Note
Front/Rear
12.1 x 7.5 x 7.3 inches
11.8 x 7.5 x 4.6 inches
3.3 Ibs
6.3 x 17.1 x 16.0 inches
Dimensions (W x H x D)
Weights
Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
•
Center
Front/Rear
18.7 Ib
Center
2.6 Ib
71
72
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG DVD PLAYER
Notes on Terminology
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for specific scenes.
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
ANGLE
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
CHAPTER
NUMBER
A high-density optical disc on which high-quality pictures and sound have been recorded by
means of digital signals. Incorporating a new video compression technology (MPEG-2) and high-
density recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.
DVD
PCM
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
REGION NUMBER
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TITLE NUMBER
TRACK NUMBER
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
VIDEO CD
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
To obtain warranty hardware service, please contact SAMSUNG at:
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
73
74
Download from Www.Somanuals.com. All Manuals Search And Download.
|
PYLE Audio TV DVD Combo PLDVD7M User Guide
RAD Data comm Network Card ASMi 31 User Guide
Radio Shack Cooktop 61 2420 User Guide
Rangemaster Refrigerator U109923 05 User Guide
Roberts Radio Portable CD Player SC9911 User Guide
Roper Clothes Dryer 3405639A User Guide
Ryobi Edger RY24200 User Guide
Samsung CRT Television CL 29A5P, CL 29A5W, CL 29A6P, CL 29A6W, CL 29A7P, CL 29A7W, CL 29M6P, CL 29M6W, CL 34M9P User Guide
Samsung Flat Panel Television LE23R8 User Guide
Samsung Security Camera C6435P User Guide