Samsung DVD Player DVD HD745 User Guide

DVD Player

Lecteur DVD

DVD-Speler

DVD-HD745

DEU FRA

ENG

AK68-00421G(01)

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

Before you start

Table of Contents

1. Setting up

CAUTION : USE OF ANY CONTROLS,

ADJUSTMENTS, OR PROCEDURES OTHER THAN

SPECIFIED HEREIN MAY RESULT IN

Setup

Accessories

* Refer to the identification label located on the back

panel of your player for its proper operating voltage.

* Install your player in a cabinet with adequate

ventilation holes. (7~10cm) Do not block ventilation

holes on any of the components for circulation of air.

* Do not push the disc tray by the hand.

* Do not stack components.

* Be sure to turn all components off before moving the

player.

* Before connecting other components to this player, be

sure to turn them off.

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before you start . . . . . . . . . . . . . . . . . . . . . . . .3

General Features . . . . . . . . . . . . . . . . . . . . . . .4

Disc Type and Characteristics . . . . . . . . . . . . .5

Description-Front Panel . . . . . . . . . . . . . . . . . .6

Description-Rear Panel . . . . . . . . . . . . . . . . . .7

Tour of the Remote Control . . . . . . . . . . . . . . .8

DVD POWER

POWER

HAZARDOUS RADIATION EXPOSURE.

PRO

EAR

INSTANT

SKIP

PEN/

OSE

DVI

VIEW

SUB

AUDIO

ANGLE

NDE

PAGE

STANDBY/ON

SACD/

BOOKMARK

Batteries for

Remote Control

(AAA Size)

Connections

Choosing a Connection . . . . . . . . . . . . . . . . . .9

Remote Control

* Be sure to remove the disc and turn off the player

after use, especially if you don’t use it for a long time.

Basic Functions

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .13

Using the Search & Skip Functions . . . . . . . .14

Using the Display Function . . . . . . . . . . . . . . .14

Using the Disc and Title Menu . . . . . . . . . . . .15

Using the Function Menu . . . . . . . . . . . . . . . .16

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .16

Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . .17

Program Play & Random Play . . . . . . . . . . . .17

2. For your safety

STANDBY/ON

* This product utilizes a laser. Use of controls or

adjustments or performance of procedures other than

those specified herein may result in hazardous

radiation exposure.

* Do not open covers and do not repair yourself.

Refer servicing to qualified personal.

STANDBY/ON

User’s Manual

Video/Audio Cable

3. Caution

Advanced Functions

* Your player is not intended for industrial use but for

domestic purposes. Use of this product is for

personal use only.

* Do not put any container filled with liquid or any small

metal objects on the player.

* Exterior influences such as lightning and static

electricity can affect normal operation of this player.

If this occurs, turn the player off and on again with the

POWER button, or disconnect and then reconnect the

AC power cord to the AC power outlet. The player will

operate normally.

* When condensation forms inside the player due to

sharp changes in temperature, the player may not

operate correctly. If this occurs, leave the player at

room temperature until the inside of the player

becomes dry and operational.

Adjusting the Aspect Ratio (EZ View) . . . . . . .18

Selecting the Audio Language . . . . . . . . . . . .19

Selecting the Subtitle Language . . . . . . . . . . .19

Changing the Camera Angle . . . . . . . . . . . . .20

Using the Instant Replay/Skip Function . . . . .20

Using the Bookmark Function . . . . . . . . . . . .21

Using the Zoom Function . . . . . . . . . . . . . . . .22

SACD Playback . . . . . . . . . . . . . . . . . . . . . . .22

DVD AUDIO Playback . . . . . . . . . . . . . . . . . .24

Clips Menu for MP3/WMA/JPEG/MPEG4 . . . .25

Folder Selection . . . . . . . . . . . . . . . . . . . . . . .26

MP3/WMA Playback . . . . . . . . . . . . . . . . . . .26

MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . .27

Picture CD Playback . . . . . . . . . . . . . . . . . . .29

DVI Cable

Install Batteries in the Remote

1. Open the battery cover on the back of the

remote.

STANDBY/ON

2. Insert two AAA batteries. Make sure that the

polarities (+ and -) are aligned correctly.

3. Replace the battery cover.

4. Disc

Changing Setup menu

* Do not clean record-cleaning sprays, benzene,

thinner, or other volatile solvents that may cause

damage to the disc surface.

* Do not touch the disc’s signal surface. Hold by the

edges or by one edge and the hole in the center.

* Wipe the dirt away gently; never wipe a cloth back and

forth over the disc.

If remote doesn’t operate properly

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

Using the Setup Menu . . . . . . . . . . . . . . . . . .30

Setting Up the Language Features . . . . . . . . .30

Setting Up the Audio Options . . . . . . . . . . . . .32

Surround Sound Speaker Setup . . . . . . . . . . .33

Setting Up the Display Options . . . . . . . . . . . .34

Setting Up the Parental Control . . . . . . . . . . .36

• Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Reference

5. Environmental info

Controlling a TV with the Remote . . . . . . . . . .38

Firmware upgrade . . . . . . . . . . . . . . . . . . . . .39

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .40

Specifications . . . . . . . . . . . . . . . . . . . . . . . .42

* The battery used in this product contains chemicals

that are harmful to the environment.

* So, dispose of batteries in the proper manner,

according to federal, state, and local regulations.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-2

ENG-3

General Features

Disc Type and Characteristics

Excellent Sound

MPEG4

This DVD player is capable of playing the following types of discs with the corresponding logos:

Dolby Digital, a technology developed by Dolby

Laboratories, provides crystal clear sound

reproduction.

This unit can play MPEG4 formats within an avi file.

Recording Types Disc Size Max. Playing Time

Characteristics

Disc Types (Logos)

DVD AUDIO

DVD AUDIO is a format specifically designed to

provide the highest possible audio fidelity capable

on DVD.

• DVD contains excellent sound and

video due to Dolby Digital and

MPEG-2 system.

Single-sided 240 min.

DVD-VIDEO

12 Cm

Double-sided 480 min.

Audio

Screen

Video with MPEG-2 compression technology.

Both regular and widescreen(16:9) pictures can be

viewed.

• Various screen and audio functions

can be easily selected through the

on-screen menu.

Single-sided 80 min.

Video

DVI (Digital Visual Interface)

DVI reduces picture noise by allowing a pure digital

video signal path from the player to your TV.

8 Cm

Double-sided 160 min.

Slow Motion

An important scene can be viewed in slow motion.

VIDEO-CD

AUDIO-CD

74 min.

20 min.

12 Cm

8 Cm

Audio

Video

• Video with CD sound, VHS

quality & MPEG-1 compression

technology.

Note

* Discs which cannot be played with this player.

Programmed Play (CD)

You can program tracks to play in desired order.

• DVD-ROM

• CD-ROM

• CDI

• DVD-RAM

• CDV

• CVD

Parental Control (DVD)

• CD is recorded as a Digital Signal

with better audio quality, less

distortion and less deterioration of

audio quality over time.

74 min.

20 min.

12 Cm

8 Cm

• CDGs play audio only, not graphics.

The parental control allows users to set the level

necessary to prohibit children from viewing harmful

movies such as those with violence, adult subject

matter, etc.

Audio

* Ability to play back may depend on recording

conditions.

• DVD-R, +R

• CD-RW

• DVD AUDIO is a format specifically

designed to provide the highest

possible audio fidelity capable on

DVD.

DVD AUDIO

SACD

• DVD+RW, -RW

Audio

Video

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle)

and screen angles while enjoying movies.

400 min.

74 min.

12 Cm

* The unit may not play certain CD-R, CD-RW and

DVD-R due to the disc type or recording

conditions.

EZ VIEW (DVD)

Easy View can convert Letter Box images to full

screen viewing on your conventional TV.

•

SACD is a high quality audio format with

higher sampling rates and fuller, richer

sound as compared to regular CD.

Audio

COPY PROTECTION

Many DVD discs are encoded with copy

protection. Because of this, you should only

connect your DVD player directly to your TV, not

to a VCR. Connecting to a VCR results in a

distorted picture from copy-protected DVD

discs.

Digital Photo Viewer (JPEG)

Disc Markings

Play Region Number

You can view Digital Photos on your TV.

Both the DVD player and the discs are coded by region.

These regional codes must match in order for the disc to

play. If the codes do not match, the disc will not play.

Repeat

Play Region Number

You can repeat a song or movie simply by pressing

the REPEAT button.

PAL broadcast system in U.K, France,

Germany, etc.

The Region Number for this player is described on the

rear panel of the player.

PAL

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise

MP3/WMA

This unit can play discs created from MP3/WMA

files.

Dolby Digital disc

Stereo disc

DivX Certification

STEREO

Instant Replay (DVD)

This function is used to replay the previous

10 seconds of a movie from the current position.

DivX, DivX Certified, and

associated logos are

trademarks of DivXNetworks, Inc and

are used under license.

DIGITAL

SOUND

Digital Audio disc

authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

DTS disc

Instant Skip (DVD)

This function skips playback ahead 10 seconds.

MP3 disc

SACD (Super Audio CD)

SACD is a high quality audio format with higher

sampling rates and fuller, richer sound as compared

to regular CD.

SACD disc

DVD AUDIO disc

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-4

ENG-5

Description-Front Panel

Description-Rear Panel

STANDBY

Front Panel Controls

1. STANDBY/ON (

)

5. STOP (

)

• When the unit is first plugged in, the red indicator

lights. When STANDBY/ON button is pressed on,

the blue light appears and the player is turned

on.

Rear Panel

• Stops disc play.

6. SKIP (

) / SEARCH

1. DIGITAL AUDIO OUT JACKS

• Use an optical or coaxial digital cable to connect

to a compatible Dolby Digital receiver.

7. COMPONENT OUT JACKS

• Use to reverse skip a scene or music.

• Use these jacks if you have a TV with

Component Video in jacks. These jacks provide

Pr, Pb and Y video.

• If Component (P-SCAN) & DVI Video Output is

selected in Setup Menu, interlaced scan mode

and Video, S-Video will not work.

• If Component (I-SCAN) Video Output is selected

in Setup Menu, progressive scan and DVI mode

will not work.

7. PLAY/PAUSE (

• Begin or pause disc play.

)

2. DISC TRAY

• Place the disc here.

Use to connect to an A/V Amplifier that contains

a Dolby Digital or DTS decoder.

8. SKIP (

) / SEARCH

3. OPEN/CLOSE (

)

2. 5.1CH ANALOG AUDIO OUT JACKS

• Connect to an amplifier with 5.1ch analog input

jacks.

• Use to forward skip a scene or music.

• Press to open and close the disc tray.

4. DISPLAY

• Operation indicators are displayed here.

3. AUDIO OUT JACKS

• Connect to the Audio input jacks of your

television, audio/video receiver.

8. SCART JACK

• Connect to a TV scart input jack.

Display Indicators

4. VIDEO OUT JACK

• Use a video cable to connect to the Video input

jack on your television.

Important Note

• Consult your TV User’s Manual to find out if your

TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual’s

instructions regarding Progressive Scan settings in

the TV’s menu system.

• The Video Output in Setup Menu must be set to

Component (I-SCAN), SCART Output or

S-Video.

5. S-VIDEO OUT JACK

• If Component(P-SCAN) & DVI Video Output is

selected in Setup Menu, Video and S-Video,

SCART will not work.

• Use the S-Video cable to connect this jack to

the S-Video jack on your television for a higher

quality picture.

• The Video Output in Setup Menu must be set to

S-Video.

• See page 35 to get more information on how to

use the setup menu.

Front Panel Display

1. Disc type indicators

6. DVI OUT JACK

2. Play / Pause / Forward play

• Use the DVI cable to connect this jack to the DVI

jack on your television for the best quality

picture.

• The Video Output in Setup Menu must be set to

Component (P-SCAN) & DVI.

3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...

no DISC : No disc loaded.

OPEN : The disc tray is open.

LOAD : Player is loading disc information.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-6

ENG-7

Tour of the Remote Control

Choosing a Connection

This remote control can also control most TVs. See page 39.

8. SEARCH Buttons (

• Allow you to search forward/backward through a disc.

)

The following shows examples of connections commonly used to connect the DVD player with a TV

and other components.

DVD POWER

TV POWER

9. STOP Button (

10. MENU Button

)

Before Connecting the DVD Player

• Brings up the DVD player’s menu.

11. RETURN Button

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

• Returns to a previous menu.

12. ZOOM Button

PROG

CLEAR

• Enlarges DVD picture.

• Refer to the owner’s manual of the additional components you are connecting for more information on those

particular components.

INSTANT

13. AUDIO Button

STEP

REPLAY

SKIP

•

Use this button to access various audio functions on a disc.

VOL

TV/VIDEO

OPEN/CLOSE

14. SUBTITLE Button

Connection to an Audio System

15. INDEX Buttons

VIDEO SEL.

DVI SEL.

• Use to skip the INDEX.

16. SACD/CD Button

Method 1

Method 2

Method 3

• Selects SACD or CD playback mode.

17. SHUTTLE DIAL (Search mode)

• Performs fast motion play.

18. TV POWER button

• Turns the TV’s power on or off.

AUDIO

SYSTEM

19. CLEAR Button

•

Use to remove menus or status displays from the screen.

20. INSTANT SKIP Button

• This function skips playback ahead 10 seconds.

5.1ch Analog Amplifier

Audio Input Jacks

2ch Amplifier

Dolby Digital Decoder

Digital Audio Input Jack

ZOOM

EZ VIEW

REPEAT

21. INSTANT REPLAY Button

Audio Input Jacks

• This function is used to replay the previous 10

seconds of a movie from the current position.

SUBTITLE

AUDIO

ANGLE

PRE.

22. CH

buttons

• Channel selection.

INDEX

PAGE

PRE.

23. OPEN/CLOSE (

) Button

SACD/CD

BOOKMARK

• To open and close the disc tray.

24. DVI SEL. Button

• DVI Output resolution setup.

25. SKIP Buttons (

)

• Use to skip the title, chapter, or track.

26. PLAY/PAUSE Button (

)

• Begin/Pause disc play.

27. INFO Button

• Displays the current disc mode.

DVD

Player

28. DISC MENU Button

• Brings up the Disc menu.

29. ENTER/DIRECTION Button

DVD Function Buttons

1. DVD POWER Button

(UP/DOWN or LEFT/RIGHT Buttons)

• This button functions as a toggle switch.

Audio Output Jaks

(2 Channel)

5.1CH Analog Audio Output Jacks

(Multi Channel)

Digital Audio Output Jack

• Turns the power on or off.

2. NUMBER Buttons

3. PROG Button

30. EZ VIEW Button

• Easy View can convert Letter Box images to full

screen viewing on your conventional TV.

31. ANGLE Button

• Allows you to program a specific order.

• Use to access various camera angles on a DVD.

4. STEP Button

• Advances play one frame at a time.

Note

32. REPEAT Button

• Allows you to repeat play a title, chapter, track, or disc.

• DVD-AUDIO only plays back two channel audio through the Digital Audio out.

Multi-channel DVD-Audio discs are output through the Analog outputs.

• SACD plays back only through the Analog outputs. (See page 32~33)

5. VOL +/- Buttons

• Control volumes.

33. PAGE Buttons

• Use to skip the PAGE.

6. TV/VIDEO Button

• Press to display all of the available video sources

( i.e., TV, Cable, Video)

34. BOOKMARK Button

35. JOG DIAL (Step mode)

• Operates frame by frame play. In CD mode, performs

track search.

7. VIDEO SEL. Button

• Selects Video output format.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-8

ENG-9

Choosing a Connection

Connection to a TV (For Video)

Connection to a TV (For Progressive scan, Digital Video)

TV (Normal, Widescreen, Projection, etc..)

Method 1

Method 2

S-Video

Method 3

Method 4

Method 2

Method 1

Basic Audio

Video

SCART Jack

Interlace scan

Digital Video DVI Audio Input

Progressive scan

Basic Audio

Scart

Cables

(not

Video

Cables

S-Video

Cable

supplied)

DVD

Player

DVD

Player

SCART Jack

Component Jacks

Audio Output

Jacks

Video Output

Jack

S-Video Jack

Component Jacks

Digital Video Out

Audio Output Jacks

1. Connect a cable with the desired method.

2. Turn on your TV and DVD Player.

3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 39)

4. Select the video output according to the cable connection.

Method 1

DVD Player + TV with Component Video Jacks.

(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)

If you use the VIDEO SEL. button, you can change easily video output in no disc mode.

Method 2

Method 1

DVD Player + TV with DVI Jack.

• Depending on your TV, your hookup for Method 2 may differ from the illustration.

(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)

DVD Player + TV with Video Input Jack

(The Video Output in Setup Menu must be set to S-Video, SCART or Component (I-SCAN).)

Method 2

DVD Player + TV with S-Video Input Jack

(The Video Output in Setup Menu must be set to S-Video.)

Important Note

Method 3

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

DVD Player + TV with Scart Input Jacks (Audio & Video)

If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan

settings in the TV’s menu system.

• When the Video output is Progressive Scan, Video and S-Video, SCART will not work.

• If you want to convert Video Output to Progressive Scan, select Component (P-SCAN) in SETUP menu and

then select "Yes" within 10 seconds. Finally change the TV's external input to Component(576p/480p).

(See Page 35)

(The Video Output in Setup Menu must be set to SCART Output.)

Method 4

DVD Player + TV with Component Video Jacks

(The Video Output in Setup Menu must be set to Component (I-SCAN).)

• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 10)

• Refer to your TV user's manual.

Note

• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.

(S-Video ➝ I-SCAN ➝ P-SCAN & DVI ➝ SCART RGB ➝ SCART Video)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-10

ENG-11

Choosing a Connection

Playing a Disc

7. Step Motion Play

DVI VIDEO Specifications

Before Play

(Except CD/DVD-AUDIO/SACD)

Turn the Jog dial clockwise or press the STEP button on

the remote during play.

- Each time the button is pressed or Jog Dial is turned, a

new frame will appear.

• Turn on your TV and set it to the correct Video

Input by pressing TV/VIDEO button on the TV

remote control.

• If you connected an external Audio System, turn

on your Audio System and set it to the correct

Audio Input.

When you press the DVI SEL. button, in case of PAL TV system in setup menu 576p, 720p, 768p, 1080i ; [50Hz]

are selected in order.

When you press the DVI SEL. button, in case of NTSC TV system in setup menu 480p, 720p, 768p, 1080i ;

[60Hz] are selected in order.

The first press of the DVI SEL. button, brings up the current resolution.

The second press allows you to change the DVI output resolution.

* The specific resolution of DVI output may not work depending on your TV.

* Refer to the TV users manual.

- No sound is heard during STEP mode.

- Press PLAY/PAUSE (

play.

) button to resume normal

After plugging in the player, the first time you press

the DVD POWER button, this screen comes up :

If you want to select a language, press a

NUMBER button. (This screen will only appear

when you plug in the player for the first time.)

If the language for the startup screen is not set,

the settings may change whenever you turn the

power on or off. Therefore, make sure that you

select the language you want to use.

- You can only perform step motion play in the forward

direction.

Important Note

8. Slow Motion Play

(Except CD/DVD-AUDIO/SACD)

• DVI (Digital Visual Interface)

Press the FWD SEARCH (

) button on the remote

DVI is an interface to enable the digital transmission of video signals between various digital devices.

Using DVI, the DVD player transmits a digital video signal and displays a vivid picture on a TV having a DVI

jack.

• Description of the DVI connection

DVI-D connector : digital signal only.

during PAUSE or STEP mode.

- By pressing the FWD SEARCH (

) button, you can

select slow motion play for 1/8, 1/4 or 1/2 of normal

speed.

- No sound is heard during slow mode.

DVI-I connector : digital and analog signal.

- Press PLAY/PAUSE (

) to resume normal play.

• Though the player uses a DVI-I cable, the player outputs only a pure digital signal to the TV.

• If TV does not support HDCP (High-bandwidth Digital content protection), snow noise or blue screen appears

on the screen.

- Reverse slow motion play will not work.

RESUME function

• Be careful that various connectors are similar to DVI connector, for example VESA PnD, VESA DFD and so on.

• Why does Samsung use DVI?

When you stop disc play, the player remembers

where you stopped, so when you press

Analog TVs require an analog video signal. However, when playing a DVD, the data transmitted to a TV is

digital. Therefore either a digital-to-analog converter(in the dvd player) or an analog-to-digital converter (in the

TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss.

DVI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to

your TV.

PLAY/PAUSE (

) button again, it will pick up

where you left off. (unless the disc is removed or the

player is unplugged, or if you press the STOP (

button twice.)

)

Play

• What is the HDCP?

1. Press the OPEN/CLOSE button.

The STANDBY indicator light goes out and the tray

opens.

HDCP(High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVI

from being copied. It provides a secure digital link between a video source(PC, DVD. etc) and a display

device(TV, projector . etc). Content is encrypted at the source device to prevent unauthorized copies from being

made.

Note

• If the player is left for about 5 minutes in pause

mode, it will stop.

2. Place a disc gently into the tray with the disc’s

label facing up.

• If the player is left in the stop mode for more than

about 30 minutes, the power will automatically shut

off. (Automatic Power-Off Function)

3. Press the PLAY/PAUSE (

OPEN/CLOSE button to close the disc tray.

) button or

PROGRESSIVE SCAN OUTPUT (525p/625p)

• If the player is left in the stop mode for more than

one minute without any user interaction, a screen

saver will be activated. Press the PLAY/PAUSE

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE

FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE

‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV

SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE

CONTACT OUR CUSTOMER SERVICE CENTER.”

4. Stopping Play

Press the STOP (

) button during play.

(

) button to resume normal play.

• This

icon indicates an invalid button press.

5. Removing Disc

Press the OPEN/CLOSE button.

6. Pausing Play

Press the PLAY/PAUSE (

remote during play.

) or STEP button on the

- Screen stops, no sound.

- To resume, press the PLAY/PAUSE (

again.

) button once

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-12

ENG-13

Using the Search & Skip Functions

Using the Display Function

Using the Disc and Title Menu

To access the desired title when there is

During play, you can search quickly through a

chapter or track or use the skip function to

jump to the next selection.

When Playing a DVD/VCD/CD

Using the Disc Menu

more than one in the disc.

For example, if there is more than one

movie on a DVD, each movie will be

identified.

Title

1. During play, press the INFO button on the remote.

1. During the playback of a DVD disc, press the

MENU button on the remote.

2. Use the UP/DOWN buttons to select the desired

item.

2. Select Disc Menu using the UP/DOWN buttons,

then press the RIGHT or ENTER button.

Searching through a Chapter or Track

3. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a title, chapter or to

start the playback from the desired time.

During play, press the SERACH (

) button

Most DVD discs are recorded in

chapters so that you can quickly find a

specific passage (similar to tracks on an

audio CD).

and press again to search at a faster speed.

Chapter

• You can also use the Shuttle dial on the remote by

turning. (2X, 4X, 8X, 16X, 32X, 128X)

• In case of SACD, when the clips menu is off, you can use

4. To make the screen disappear, press the INFO

button again.

Allows playback of the film from a

desired time. You must enter the starting

time as a reference.

this function. (See page 23)

Time

Audio

DVD

VCD

2X, 8X, 32X, 128X

4X, 8X

Refers to the language of the film

soundtrack. In the example, the

soundtrack is played in English 5.1CH.

A DVD disc can have up to eight

different soundtracks.

DVD

CD/SACD/DVD-AUDIO 2X, 4X, 8X

DVD

Using the Title Menu

Title

1. During the playback of a DVD disc, press the

MENU button on the remote.

Chapter

0:00:13

Time

ENG 5.1CH

Audio

Skipping Tracks

2. Select Title Menu using the UP/DOWN buttons,

then press the RIGHT or ENTER button.

Off

Refers to the subtitle languages

available in the disc.

You will be able to choose the subtitle

languages or, if you prefer, turn them off

from the screen.

Subtitle

During play, press the

• When playing a DVD, if you press the

moves to the next chapter. If you press the

button.

button, it

Subtitle

moves to the beginning of the chapter. One more press

makes it move to the beginning of the previous chapter.

A DVD disc can have up to 32 different

subtitles.

VCD

• When playing a VCD 2.0 in Menu Off mode, a VCD 1.1,

VCD

SACD, DVD-AUDIO or a CD, if you press the

it moves to the next track. If you press the

button,

Track

button, it

0:00:48

Time

moves to the beginning of the track. One more press

makes it move to the beginning of the previous track.

Note

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 14)

• If a track exceeds 15 minutes when playing a VCD and

you press the

button, it moves forward 5 minutes, in

menu off mode. If you press the

backward 5 minutes.

button, it moves

Note

• Depending on a disc, the Title and Disc Menus

may not work.

• Title Menu will only be displayed if there are at

least two titles in the disc.

Track

Note

0:00:48

Time

• When playing a VCD 2.0, you can choose Menu

On or Menu Off by using the DISC MENU

button.

• You can also use the Disc Menu, using the DISC

MENU button on the remote.

• In VCD 2.0, the DISC MENU button is used to

select Menu On or Menu Off mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-14

ENG-15

Using the Function Menu

Repeat Play

Slow Repeat Play

Program Play & Random Play

Using the Function Menu

Repeat the current track, chapter, title, a

chosen section (A-B), or all of the disc.

This feature allows you to slowly repeat

scenes containing sports, dancing, musical

instruments being played etc. so you can

study them more closely.

Program Play (CD)

1. Press the MENU button during playback.

1. Press the PROG button.

2. Use the UP/DOWN buttons to highlight Function,

then press the RIGHT or ENTER button.

2. Use the LEFT/RIGHT buttons to select

PROGRAM. Press the ENTER button.

1. Press the REPEAT button on the remote.

Repeat screen appears.

When playing a DVD/VCD

3. Use the LEFT/RIGHT/UP/DOWN buttons to select

the first track to add to the program.

Press the ENTER button. The selection numbers

appear in the Program Order box.

3. Function selection screen appears: Info, Zoom,

Bookmark, Repeat and EZ View.

2. Select Chapter, Title or A-B using the

LEFT/RIGHT buttons.

1. During play, press the PLAY/PAUSE (

button.

)

Info (See Page 14~15)

• Chapter (

) : repeats the chapter that is playing.

- Zoom (See Page 22)

2. Press the FWD SEARCH (

) button on the

• Title ( _T) : repeats the title that is playing.

• A-B : repeats a segment of the disc that you select.

Bookmark (See Page 21)

Repeat (See Page 16)

4. Press the PLAY/PAUSE (

The disc will be played in programmed order.

) button.

remote during PAUSE or STEP mode.

3. Press the REPEAT button on the remote.

Repeat screen appears.

* A-B REPEAT

• Press ENTER at the point where you want the repeat

play to start (A).

• Press ENTER at the point where you want the repeat

play to stop (B).

• To terminate the function, press the 'CLEAR' button.

• A-B REPEAT does not allow you to set point (B) until at

least 5 seconds has elapsed after point (A) has been

set.

- EZ View (See Page 18)

PROGRAM

RANDOM

4. Use the UP/DOWN button to highlight one of the

5 functions. Then press the RIGHT or ENTER

button to access the function.

4. Select A-B using the LEFT/RIGHT buttons.

5. Press ENTER at the point where you want the

repeat play to start (A).

• A-B REPEAT does not allow you to set point (B) until at

least 5 seconds has elapsed after point (A) has been

set.

PROGRAM 01

Track

Program Order

- - - - - -

- - - - - - - -

01 02 03 04

05 06 07 08

09 10 11 12

13 14 15 16

DVD

6. Press ENTER at the point where you want repeat

play to stop (B).

REPEAT ENTER

Off

01 A - B

7. To return to normal play, press the CLEAR button

CLEAR

and then press the PLAY/PAUSE (

) button.

VCD/CD

Note

Random Play (CD)

REPEAT ENTER

• The disc will play from A to B repeatedly at the

speed you chose.

Note

Off

01 A - B

1. Press the PROG button.

• You can also directly select these functions using

their respective buttons on the remote.

2. Use the LEFT/RIGHT buttons to select RANDOM.

Press the ENTER button.

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 14)

PROGRAM

RANDOM

3. Press ENTER.

4. To return to normal play, press REPEAT again,

then press the LEFT/RIGHT buttons to select Off

and press ENTER.

Note

• Depending on a disc, the Program and Random

Play functions may not work.

Note

• DVD repeats play by chapter or title, CD and VCD

repeat play by disc or track.

• This unit can support a maximum of 20

programmed tracks.

• Depending on a disc, the Repeat function may not

• While in playback mode, press the CLEAR button

on the remote control to cancel Programmed Play

or Random Play.

work.

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 14)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-16

ENG-17

Adjusting the Aspect Ratio (EZ View)

Selecting the Audio Language

Selecting the Subtitle Language

To play back using aspect ratio (DVD)

Press the EZ VIEW button.

If you are using a 4:3 TV

You can select a desired audio quickly and

easily with the AUDIO button.

You can select a desired subtitle quickly and

easily with the SUBTITLE button.

1. For 16:9 aspect ratio discs

• The screen size changes when the button is

pressed repeatedly.

• The screen zoom mode operates differently

depending on a screen setting in the initial setup

menu.

• To ensure correct operation of the EZ VIEW

button, you should set the correct aspect ratio in

the initial setup (See page 34).

• 4:3 Letter Box

Using the AUDIO button

Using the SUBTITLE button

Displays the content of the DVD title in 16:9

aspect ratio. The black bars will appear at the

top and bottom of the screen.

1. Press the AUDIO button.

1. Press the SUBTITLE button.

- The subtitle languages are represented by

abbreviations.

2. The Audio changes when the button is pressed

repeatedly.

The audio languages are represented by abbreviations.

• 4:3 Pan Scan

The left and right of the screen are cut off and

displays the central portion of the 16:9 screen.

2. The subtitle changes when the button is pressed

repeatedly.

DVD

• Screen Fit

The top and bottom of the screen are cut off

and the full screen appears.

DVD

If you are using a 16:9 TV

1. For 16:9 aspect ratio discs

AUDIO

ENG DOLBY DIGITAL 5.1CH

SUBTITLE

Off

The picture will look vertically stretched.

•

Wide Screen

Displays the content of the DVD title in 16:9

aspect ratio.

• Zoom Fit

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

- In case of a VCD or CD, you can select among Stereo,

Right or Left.

• Screen Fit

- Use the LEFT/RIGHT buttons to select the desired

subtitle language on a MPEG4 then press the ENTER.

The top and bottom of the screen are cut off.

When playing a 2.35:1 aspect ratio disc, the

black bars at the top and bottom of the screen

will disappear. The picture will look vertically

stretched. (Depending on a type of disc, the

black bars may not disappear completely.)

VCD/CD

2. For 4:3 aspect ratio discs

• Normal Screen

Displays the content of the DVD title in 4:3

aspect ratio.

MPEG4

AUDIO

Stereo

None

• Screen Fit

The top and bottom of the screen are cut off

and the full screen appears.

• Zoom Fit

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

- Use the LEFT/RIGHT buttons to select the desired

Audio on a MPEG4 then press the ENTER.

The picture would look vertically stretched.

• Zoom Fit

3. To remove the SUBTITLE icon, press the CLEAR

or RETURN button.

MPEG4

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

2. For 4:3 aspect ratio discs

• Normal Wide

Displays the content of the DVD title in 16:9

aspect ratio. The picture will look horizontally

stretched.

• Screen Fit

The top and bottom of the screen are cut off

and the full screen appears.

Note

• This function depends on what subtitles are

encoded on the disc and may not work.

3. To remove the AUDIO icon, press the CLEAR or

RETURN button.

• This function may behave differently depending on

a type of disc.

The picture will look vertically stretched.

• A DVD disc can contain up to 32 subtitle

• Zoom Fit

languages.

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

• How to have the same subtitle language come

up whenever you play a DVD;

Refer to “Setting Up the Language Features” on

page 32.

Note

• This function depends on what audios are

encoded on the disc and may not work.

• Vertical Fit

• A DVD disc can contain up to 8 audio languages.

When a 4:3 DVD is viewed on a 16:9 TV, black

bars will appear at the left and right of the

screen in order to prevent the picture from

looking horizontally stretched.

• How to have the same audio language come up

whenever you play a DVD;

Refer to “Setting Up the Language Features” on

page 31.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-18

ENG-19

Changing the Camera Angle

Using the Instant Replay/Skip Function

Using the Bookmark Function

When a DVD contains multiple angles of a

particular scene, you can use the ANGLE

function.

Using the Instant Replay function (DVD)

This feature lets you bookmark sections of a

DVD or VCD (Menu Off mode) so you can

quickly find them at a later time.

Recalling a Marked Scene

If you miss a scene, you can see it again using

this function.

1. During play, press the BOOKMARK button on the

remote.

Using the ANGLE button

If you press the INSTANT REPLAY button, the

current scene moves backward about 10 seconds,

and plays back.

Using the Bookmark Function (DVD/VCD)

2. Use the LEFT/RIGHT buttons to select a marked

scene.

If the disc contains multiple angles, the ANGLE

mark appears on the screen.

1. During play, press the BOOKMARK button on the

remote.

3. Press the PLAY/PAUSE (

the marked scene.

) buttons to skip to

* Depending on a disc, the Instant Replay function may not

work.

1. Press the ANGLE button, then ANGLE icon will

appear with the current angle number and the

number of angles available.

2. Use the LEFT/RIGHT buttons to move to the

desired bookmark icon.

3. When you reach the scene you want to mark,

press the ENTER button. The icon will change to

a number (1, 2, or 3).

2. Press the ANGLE button repeatedly to the

desired angle.

3. To remove the ANGLE icon, press the CLEAR or

RETURN button.

4. Press the BOOKMARK button to turn Off the

display.

ANGLE

4/6

Clearing a Bookmark

Using the Instant Skip function (DVD)

1. During play, press the BOOKMARK button on the

remote.

Use this function to skip playback about 10

seconds ahead of the current scene.

2. Use the LEFT/RIGHT buttons to select the

bookmark number you want to delete.

Press the INSTANT SKIP button.

Note

3. Press the CLEAR button to delete a bookmark

number. Press the BOOKMARK button to turn Off

the display.

- Playback will skip ahead 10 seconds.

- Depending on a disc, this function may not work.

• If the disc has only one angle, this feature won’t

work. Currently, very few discs have this feature.

Note

• Up to three scenes may be marked at a time.

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 14)

• Depending on a disc, the Bookmark function may

not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-20

ENG-21

Using the Zoom Function

SACD Playback

1. Open the disc tray.

Using the Zoom Function (DVD/VCD)

SACD Clips Menu Off Play Function

CD Layer Play Function

1. In Stop mode, press the DISC MENU button until

the Clips menu is off.

During SACD playback, press the SACD/CD button

to playback the CD layer of a dual layer SACD disc.

(Refer to the page 14 for setting CD playback

Function).

2. Place the SACD disc on the tray.

- Place the SACD disc with the labeled side up.

1. During play or pause mode, press the ZOOM

button on the remote.

A Zoom mark will be displayed on screen.

2. During playback, press the INFO button and the

screen below appears.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

2. Use the UP/DOWN or LEFT/RIGHT buttons to

select the part of the screen you want to zoom in

on.

3. Use the UP/DOWN buttons to select the desired

item.

Track

0:00:13

Time

3. Press the ENTER button.

- During DVD play, press ENTER to zoom in

2X/4X/2X/Normal in order.

SACD

O ff

Track

00:00:23

2CH

MULTI

0:00:13

Time

0 0 1 . West Side Story

MUSIC

MULTI

Audio

- During VCD play, press ENTER to zoom in 2X/Normal

in order.

0 0 2 . West Side Story

0 0 3 . West Side Story

0 0 4 . West Side Story

0 0 5 . West Side Story

0 0 6 . West Side Story

MUSIC

0 0 1 . West Side Story

MUSIC

To access the desired Track when there

is more than one in the disc.

4. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a track and to start the

playback from the desired time.

Allows playback from a desired time.

You must enter the starting time as a

reference.

SACD Clips Menu On Play Function

1. Use the UP/DOWN buttons to select a music title.

To access the desired Track when there

is more than one in the disc.

2. Press the ENTER button to begin playback of the

music title.

Note

- If you want to use the Repeat Function, press the

REPEAT button to change the mode, such as Off,

Track, Disc.

Allows playback from a desired time by

using the number buttons.

• Some SACD discs do not include a CD layer.

• Depending on a disc, this function may not work.

*Off : Normal Playback

If you want to change the 2channel or

multi channel in play or stop mode,

press AUDIO button.

- You can use this function when SACD

disc includes multi channel and 2

channel audio format.

*Track : Repeats the current music title.

*Disc : Repeats the music titles in the SACD.

- If you want to see information about the Disc title

and Artist, press the INFO button.

- If you want to convert into regular CD mode,

press the SACD/CD button.

- During play or stop mode, you can change the

2CH or MULTI mode by using LEFT/RIGHT

buttons. (You can use this function when SACD

disc includes multi channel and 2 channel audio

format.)

• 2CH : L, R

• MULTI : F/L, F/R, R/L, R/R, C/T, S/W

5. To make the screen disappear, press the INFO

button again.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-22

ENG-23

SDAVCDDAUPlDaIyObaPclakyback

DVD AUDIO Playback

Clips Menu for MP3/WMA/JPEG/MPEG4

1. Open the disc tray.

Most DVD AUDIO discs are recorded in

Group, you can change Groups with this

Function.

REPEAT Play

Discs with MP3/WMA/JPEG/MPEG4 contain

individual songs, pictures or movies that can

be organized into folders as shown below.

They are similar to how you use your

1. Press the REPEAT button on the remote during

playback.

2. Place the DVD AUDIO disc on the tray.

Place the DVD AUDIO disc with the labeled side up.

Note

2. Select Title (

LEFT/RIGHT button.

), Group (

) using the

computer to put files into different folders.

* Bonus Group playback.

3. Close the tray.

- The tray closes and disc plays.

• Some DVD AUDIO discs have Bonus

groups. If you want to play a Bonus

group, you must enter the Bonus

Group code. The code is usually on the

DVD AUDIO disc case.

3. Press ENTER.

1. Open the disc tray.

2. Place the disc on the tray.

- Place the disc with the labeled side up.

Using the Display Function

1. During play, press the INFO button on the remote.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

2. Use the UP/DOWN buttons to select the desired

item.

To access the desired Track when there is

more than one on the DVD AUDIO disc.

3. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a Group, Track, Page

or to start the playback from the desired time.

If pages are included with the

DVD-AUDIO, you can see this icon.

To access the desired page, you can

use this Function.

O ff

00:00:23

1_mp3

B e c a u s e Yo u

C a c t u s

If a slide show is included with the

DVD-AUDIO, you can see this icon.

In this case you cannot use PAGE

PRE./NEXT buttons.

4. To make the screen disappear, press the INFO

button again.

AUDIO Format Display

Sad Day

Wonderful

During DVD AUDIO playback, press the AUDIO

button to see AUDIO Format information.

• LPCM : Linear Pulse Code Modulation.

Not compressed Audio data format.

• PPCM : Packet Pulse Code Modulation.

Lossless compressed Audio data format.

If a video zone is included with the

DVD-AUDIO, you can see this icon.

In this case you cannot use PAGE

PRE./NEXT buttons.

DVD AUDIO

Group

Track

Parent Folder, Current Folder Folders and Files in

and Peer Folders Current Folder

Page

0:00:13

Time

Allows playback of the music from a

desired time by using the number buttons.

•

: Name of currently playing file.

: Current Playback Time.

Page, Index Function

1. Use PAGE PRE./NEXT buttons to Skip the Page

when there is more than one in a group.

• Some DVD-AUDIO discs include a slide show. In

the slide show mode, this function can not use.

• PAGE is still images. You can see the still

images when playback DVD-AUDIO disc.

Note

: Current Playback Mode : There are 4

modes. They can be selected in order by

pressing the REPEAT button.

Some DVD-AUDIO discs don’t audio down-mixing.

These discs always output 5.1ch analog audio

regardless of audio setup.

- Off : Normal Playback

- Track : Repeats the current track.

- Folder : Repeats the current folder.

- Random : Files in the disc will be played

in random order.

Note

2. Use INDEX PRE./NEXT buttons to Skip the Index

when there is more than one in a track.

Some DVD-AUDIO discs don’t allow audio

down-mixing. These discs always output 5.1ch

analog audio regardless of audio setup.

Note Depending on a disc, this function may not work.

Note When you play a MPEG4(AVI) file, refer

to page 27.

•

: MP3 file icon.

: WMA file icon.

: JPEG file icon.

•

: AVI file icon.

: Folder icon.

: Current Folder

icon.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-24

ENG-25

Folder Selection

MP3/WMA Playback

MPEG4 Playback

1. Open the disc tray.

The folder can only be selected in the Stop

mode.

CD-R MP3/WMA discs

When you record MP3 or WMA files on CD-R,

please refer to the following.

2. Place the disc on the tray.

- Place the disc with the labeled side up.

2. Place the disc on the tray.

- Place the disc with the labeled side up.

• To select the Parent Folder

• Your MP3 or WMA files should be ISO 9660 or JOLIET

format.

ISO 9660 format and Joliet MP3 or WMA files are

compatible with Microsoft's DOS and Windows, and with

Apple's Mac. This format is the most widely used.

Press the RETURN button to go to parent folder,

or use the UP/DOWN buttons to select “..” and

press ENTER to go to the parent folder.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

• To select the Peer Folder

MPEG4 Play Function

Use the LEFT/RIGHT buttons to highlight left

window. Use the UP/DOWN buttons to select the

desired folder, then press ENTER.

MP3/WMA Play Function

• When naming your MP3 or WMA files, do not exceed 8

characters, and enter “.mp3, .wma” as the file

extension.

General name format of: Title.mp3. or Title.wma.

When composing your title, make sure that you use 8

characters or less, have no spaces in the name, and avoid

the use of special characters including: (.,/,\,=,+).

AVI files are used to contain the audio and video

data. Only AVI format files with the “.avi” extensions

can be played.

1. Select the desired folder.

2. Use the UP/DOWN or LEFT/RIGHT buttons to

select a song file.

• To select the Sub-Folder

1. Select the desired folder. (See page 26 to select

the folder)

Use the LEFT/RIGHT buttons to highlight right

window. Use the UP/DOWN buttons to select the

desired folder, then press ENTER.

3. Press ENTER to begin playback of the song file.

• Use a decompression transfer rate of at least 128

Kbps when recording MP3 files.

2. Use the UP/DOWN or LEFT/RIGHT buttons to

select an avi file (DivX/XviD) and then press the

ENTER button.

Sound quality with MP3 files basically depends on the rate

of compression/decompression you choose. Getting CD

audio sound requires an analog/digital sampling rate, that

is conversion to MP3 format, of at least 128 Kbps and up

to 160 Kbps. However, choosing higher rates, like 192

Kbps or more, only rarely give better sound quality.

Conversely, files with decompression rates below 128

Kbps will not be played properly.

Root

WMA

JPEG

MP3

Parent Folder

MUSIC

Current Folder

• Use a decompression transfer rate of at least 64Kbps

when recording WMA files.

1st

Sub-Folders

Sound quality with WMA files basically depends on the

rate of compression/decompression you choose.

Getting CD audio sound requires an analog/digital

sampling rate, that is conversion to WMA format, of at

least 64Kbps and up to 192Kbps.

2nd

Repeat/Random playback

SONG FILE 1

SONG FILE 2

Press the REPEAT button to change playback

mode. There are 4 modes, such as Off, Track,

Folder and Random.

Peer Folders

Repeat Playback

Conversely, files with decompression rates below 64Kbps

or over 192Kbps will not be played properly.

SONG FILE 3

MPEG4 FILES

Press the REPEAT button to change playback

mode. There are 4 modes, such as Off, Folder, Title

and A-B (a distance between two points appointed

by user).

- Off : Normal Playback

- Track : Repeats the current song file.

- Folder : Repeats the song files which have the

same extension in the current folder.

- Random : Song files which have the same

extension will be played in random

order.

•

Do not try recording copyright protected MP3 files.

Certain "secured" files are encrypted and code protected

to prevent illegal copying. These files are of the following

types: Windows Media^TM(registered trade mark of

Microsoft Inc) and SDMI^TM(registered trade mark of The

SDMI Foundation). You cannot copy such files.

REPEAT ENTER

Off

01 A - B

• Important: The above recommendations cannot be taken

as a guarantee that the DVD player will play MP3

* To resume normal play, press the CLEAR button.

recordings, or as an assurance of sound quality. You

should note that certain technologies and methods for

MP3 file recording on CD-Rs prevent optimal playback of

these files on your DVD player (degraded sound quality

and in some cases, inability of the player to read the files).

• Folder (

) : repeats the AVI files which have the same

extension in the current folder.

• Title ( _T) : repeats the title that is playing.

• A-B : repeats a segment of the file that you select.

• This unit can play a maximum of 3000 files and 300

folders per disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-26

ENG-27

MPEG4 Playback

Picture CD Playback

1. Select the desired folder. (See page 26 to select

the folder)

Note

Using the Display Function

MPEG4 Function Description

• If no buttons on the remote control pressed for 10

seconds, the menu will disappear.

Press the INFO button on the remote control to

display the menu again.

• Press the STOP button to return to the clips menu.

• When playing a Kodak Picture CD, the unit

displays the Photo directly, not the clips menu.

1. During play, press the INFO button on the remote.

Function

Description

Reference page

2. Use the UP/DOWN buttons to select a Picture file in

clips menu and then press the ENTER button. You

should get a screen that looks like the one below.

2. Use the UP/DOWN buttons to select the desired

item.

During play, press the

button, it moves forward

or backward 5 minutes.

Skip

(

)

3. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a title or to start the

playback from the desired time.

During play, press the SERACH

ENTER RETURN

(

) button and press

again to search at a faster

speed. Allows you to search

at a faster speed in an AVI

file. (2X, 4X, 8X)

CD-R JPEG Discs

• Only files with the ".jpg" and ".JPG" extensions can

be played.

4. To make the screen disappear, press the INFO

button again.

Allows you to search at a

slower speed in an AVI file.

(1/8X, 1/4X, 1/2X)

Slow Motion

Play

P 13

• If the disc is not closed, it will take longer to start

playing and not all of the recorded files may be

played.

• Use the INFO button on the remote control to select

the menu you want to view and then press the ENTER

button.

DivX

Each time the STEP button

is pressed, a new frame will

appear.

Step Motion

Play

Title

P 13

P 22

0:00:13

Time

• Only CD-R discs with JPEG files in ISO 9660 or Joliet

format can be played.

MP3 1/8

Audio

2X/4X/2X/Normal in order

•

: Returns to the Album Screen.

ZOOM

None

Subtitle

640x272

Size

• The name of the JPEG file may not be longer than 8

characters and should contain no blank spaces or

special characters (. / = +).

- These functions may not work depending on

MPEG4 file.

• To see the next 6 pictures, press the

button.

• To see the previous 6 pictures, press the

• Only a consecutively written multisession disc can be

played. If there is a blank segment in the multisession

disc, the disc can be played only up to the blank

segment.

CD-R AVI file

•

: Each time the ENTER button is pressed, the

picture rotates 90 degrees clockwise.

This unit can play the following video compression

formats within the AVI file format:

- DivX 3.11 contents

- DivX 4 contents (Based on MPEG-4 Simple

Profile)

- DivX 5 contents (MPEG-4 simple profile plus

additional features such as bi-directional frames.

Qpel and GMC are also supported.)

- XviD MPEG-4 compliant Contents.

To access the desired title when there is

more than one in the disc.

Title

Time

•

: Each time the ENTER button is pressed, the

picture is enlarged up to 4X.

(Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)

• A maximum of 3000 images can be stored on a single

CD.

Allows playback of the film from a

desired time. You must enter the starting

time as a reference.

• Kodak Picture CDs are recommended.

•

: The unit enters slide show mode.

• When playing a Kodak Picture CD, only the JPEG

files in the pictures folder can be played.

*Before beginning the Slide Show, the picture interval

must be set.

To select the desired language of the

title soundtrack. The MP3, AC3 and

WMA are supported. You can use this

function using the AUDIO button.

(See page 19)

• Kodak Picture CD : The JPEG files in the pictures

folder can be played automatically.

Audio

ENTER RETURN

TIMER:

• Konica Picture CD : If you want to see the Picture,

select the JPEG files in the clips menu.

This unit supports all resolutions up to maximum below.

• Fuji Picture CD : If you want to see the Picture, select

the JPEG files in the clips menu.

DivX3.11 & DivX4 & XviD

Bitrate may fluctuate:

Device may skip decoding 720 x 576 @25fps

the high bitrate portions

and begin decoding again

when Bitrate returns to

normal.

DivX5

You will be able to choose the subtitle

languages or, if you prefer, turn them off

from the screen. You can use this

function using the SUBTITLE button.

(See page 19)

720 x 480 @30fps

• QSS Picture CD : The unit cannot play QSS Picture

CD.

Subtitle

Size

: Maximum bitrate : 4Mbps

•

: When this icon is selected and ENTER is

pressed, the pictures change automatically

with about a 6 second interval.

• If the number of files in 1 Disc is over 3000, only 3000

JPEG files can be played.

• If the number of folders in 1 Disc is over 300, only

JPEG files in 300 folders can be played.

File Size has a relationship with

resolution of a title. The larger file size

is, the higher resolution is displayed.

If the file resolution is small, it scales up

automatically. So you can see the larger

screen.

•

: The pictures change automatically with about

a 12 second interval.

Note

: The pictures change automatically with about

a 18 second interval.

• Some MPEG-4 files created on a personal

computer may not be play back. That is why Codec

Type, Version and Higher resolution over

specification is not supported.

Depending on a file size, the amount of time between

each picture may be different from the manual.

• This unit supports CD-R/RW written in MPEG4 in

accordance with the “ISO9660 format”.

If you don’t press any button, the slide show will start

automatically in about 10 seconds by default.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-28

ENG-29

Using the Setup Menu

Setting Up the Language Features

The Setup menu lets you customize your DVD

player by allowing you to select various

language preferences, set up a parental level,

even adjust the player to the type of television

screen you have.

If you set the player menu, disc menu, audio

and subtitle language in advance, they will

come up automatically every time you watch a

movie.

Using the Disc Menu Language

Using the Audio Language

This function changes the text language only on the

disc menu screens.

1. With the unit in Stop mode, press the MENU

button.

1. With the unit in Stop mode, press the MENU

button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

Using the Player Menu Language

1. With the unit in Stop mode, press the MENU

button on the remote. Select Setup using

UP/DOWN buttons, then press the RIGHT or

ENTER button.

1. With the unit in Stop mode, press the MENU

button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

3. Select Language Setup using UP/DOWN

buttons, then press the RIGHT or ENTER button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

3. Select Language Setup using UP/DOWN

buttons, then press the RIGHT or ENTER button.

4. Select Audio using UP/DOWN buttons, then

press the RIGHT or ENTER button.

Language Setup : Setup of the Language.

3. Select Language Setup using UP/DOWN

buttons, then press the RIGHT or ENTER button.

4. Select Disc Menu using UP/DOWN buttons, then

press the RIGHT or ENTER button.

5. Use the UP/DOWN buttons to select the desired

language.

Audio Setup : Setup of the Audio Options.

- Select “Original” if you want the default soundtrack

language to be the original language the disc is

recorded in.

Display Setup : Setup of the Display Options.

Use to select which type of screen you want to

watch and several display options.

5. Use the UP/DOWN buttons to select the desired

language.

- Select “Others” if the language you want is not listed.

Parental Setup : Setup of the Parental Level.

Allows users to set the level necessary to

prevent children from viewing unsuitable

movies such as those with violence, adult

subject matter, etc.

AUDIO LANGUAGE

Audio

4. Select Player Menu using UP/DOWN buttons,

then press the RIGHT or ENTER button.

DivX(R) Registration : Please use the

Registration code to register this player with

the DivX(R) Video on Demand service.

This will allow you to rent and purchase videos

using the DivX(R) Video On Demand format.

To learn more go to www.divx.com/vod.

Original

Others

LANGUAGE SETUP

6. Press the ENTER button.

- The language is selected and the screen returns to

6. Press the ENTER button.

- The language is selected and the screen returns to

Language Setup menu.

Disc Menu

Title Menu

5. Use the UP/DOWN buttons to select the desired

language.

Function

Setup

2. Use the UP/DOWN buttons on the remote to

access the different features.

3. Press the ENTER or RIGHT button to access the

sub features.

To make the setup screen disappear after setting

up, press the MENU button again.

6. Press the ENTER button.

- The language is selected and the screen returns to

Language Setup menu.

- To make the SETUP menu disappear, press the

RETURN or LEFT button.

Note

Depending on a disc, some Setup Menu selections

may not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-30

ENG-31

Setting Up the Language Features

Setting Up the Audio Options

Surround Sound Speaker Setup

1. With the unit in Stop mode, press the MENU button.

DTS

1. With the unit in Stop mode, press the MENU

button.

Using the Subtitle Language

1. Off : Doesn’t output digital signal.

2. On : Outputs DTS Bitstream via digital output only.

Select DTS when connecting to a DTS Decoder.

1. With the unit in Stop mode, press the MENU

button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

Note There is no analog audio output when you play

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

3. Select Audio Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

DTS sound disc.

3. Select Audio Setup using UP/DOWN buttons,

Dynamic Compression

1. On : To select dynamic compression.

2. Off : To select the standard range.

then press the RIGHT or ENTER button.

3. Select Language Setup using UP/DOWN

buttons, then press the RIGHT or ENTER button.

4. Select Subtitle using UP/DOWN buttons, then

press the RIGHT or ENTER button.

PCM Down Sampling

1. On : Select this when the amplifier connected to the

player is not 96KHz compatible. In this case, the

96KHz signals will be down converted to 48KHZ.

5. Use the UP/DOWN buttons to select the desired

language.

2. Off : Select this when the amplifier connected to the

player is 96KHz compatible. In this case, all

signals will be output without any changes.

- Select “Automatic” if you want the subtitle language to

be the same as the language selected as the audio

preference.

4. Use the UP/DOWN buttons to select the desired

item. Then press the RIGHT or ENTER button.

Speaker Setup (See pages 33~34)

- Select “Others” if the language you want is not listed.

Some discs may not contain the language you select

as your initial language; in that case the disc will use its

original language setting.

4. Use the UP/DOWN buttons to select Speaker

Setup. Then press the RIGHT or ENTER button.

AUDIO SETUP

Note

AUDIO SETUP

Dolby Digital Output

PCM

• How to make the SETUP menu disappear or

return to menu screen during set up;

Press RETURN or LEFT button.

MPEG-2 Digital Out

DTS

PCM

Off

Dolby Digital Output

PCM

SUBTITLE LANGUAGE

Automatic

MPEG-2 Digital Out

DTS

PCM

Off

Dynamic Compression

PCM Down Sampling

Speaker Setup

Dynamic Compression

PCM Down Sampling

Speaker Setup

• Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

Subtitle

Others

• “DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

Dolby Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio. Select

PCM when using the Analog Audio Outputs.

• DVD-AUDIO

5. Use the UP/DOWN or LEFT/RIGHT buttons to

select the desired item. Then press the ENTER

button.

- Outputs 2 channel digital audio only.

- Some DVD-AUDIO discs do not downmix, so they

will not output 2 channel digital audio.

- MULTI channel DVD-AUDIO discs play back

through the analog outputs.

6. Press the ENTER button.

- The language is selected and the screen returns to

2. Bitstream : Converts to Dolby Digital Bitstream

(5.1CH). Select Bitstream when using the

Digital Audio Output.

Language Setup menu.

SPEAKER SETUP

Note Even when PCM Down sampling is Off

•

Some discs will only output down sampled

audio through the digital outputs.

• SACD

Outputs analog signals only.

Note

• If the selected language is not recorded on the

disc, the original pre-recorded language is

selected.

•

High sampling rate DVD-Audio discs

(192KHz or 176.4KHz) always output audio

down sampled to 96KHz or 88.2KHz through

the digital outputs.

• How to make the SETUP menu disappear or

return to menu screen during set up;

Press RETURN or LEFT button.

•

When playing LPCM or PPCM DVD

protected by copyright. If digital audio source

is 48KHz/16bit the Digital output is mute.

MPEG-2 Digital Out

1. PCM : Converts to PCM(2CH) audio. Select PCM

when using the Analog Audio Outputs.

2. Bitstream : Converts to MPEG-2 Digital Bitstream

(5.1CH or 7.1CH). Select Bitstream when

using the Digital Audio Output.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-32

ENG-33

Surround Sound Speaker Setup

Setting Up the Display Options

Video Output

Select Video Output.

The default settings : FRONT L, R (Small), CENTER

(Small), SURROUND (Small).

Select the size of the speakers to be connected.

1. With the unit in Stop mode, press the MENU button.

Still Mode

These options will help prevent picture shake in still

mode and display small text clearer.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

1. S-Video : Select when you want to use Video and

S-Video Out.

1. Auto : When selecting Auto, Field/Frame mode will be

automatically converted.

• Front (FL, FR)

- Large: Normally select this.

- Small: When the sound distorts or the surround

sound effects are difficult to hear, select this.

This activates the Dolby Digital bass redirection

circuitry and outputs the bass frequencies of the

speaker from the subwoofer.

2. Component (I-SCAN) : Select when you want to use

Video and Component 525i(Interlace) Out

3. Select Display Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

2. Field : Select this feature when the screen shakes in

the Auto mode.

3. Component (P-SCAN) & DVI : Select when you want

to use Component 525p(Progressive) Out or DVI.

3. Frame : Select this feature when you want to see

small letters more clearly in the Auto mode.

If you press the VIDEO SEL. button, Video output

mode is changed in regular sequence in no disc mode.

(S-Video ➝➝I-SCAN ➝➝P-SCAN & DVI ➝➝SCART

RGB ➝➝SCART VIDEO)

Screen Messages

Use to turn on-screen messages On or Off.

• Center

- None: If you do not connect a center speaker,

select this.

Black Level

Adjusts the brightness of the screen.(On/Off)

4. SCART Output : Select when you want to use Scart

Out.

- Large: Normally select this.

• RGB : Select when you want to use SCART RGB

TV System

- Small: When the sound distorts, select this.

This activates the Dolby Digital bass redirection

circuitry and outputs the bass frequencies of the

center speaker from other speakers.

Out.

1. NTSC Disc : In case of using NTSC disc

• If your TV system only has PAL-Video input, you

must choose “PAL”. When you choose “PAL”,

Interlace output format is PAL 60 Hz output.

• Video : Select when you want to use SCART

Video Out.

4. Use the UP/DOWN buttons to select the desired

item. Then press the RIGHT or ENTER button.

* If the Yes/No selection in the Display Setup sub Menu

is not made within 10 seconds, the screen returns to

the previous menu.

• If your TV system only has NTSC, input you must

choose “NTSC Output”.

• Surround (SL, SR)

- None: If you do not connect a center speaker,

select this.

• If you set up the NTSC TV system, DVI output frame

rate is 60 Hz.

- Large (Rear/Side): Normally select either of these

according to the rear speaker’s position.

- Small (Rear/Side): When the sound distorts or the

surround sound effects are difficult to hear, select

either of these according to the rear speaker’s

position. This activates the Dolby Digital bass

redirection circuitry and outputs the bass

frequencies of the rear speaker from other

speakers.

2. PAL Disc : In case of using PAL disc

• If your TV system only has NTSC-Video input, you

must choose “NTSC Output”.

DVI Output

Mode B

• If your TV system only has PAL input, you must

choose “PAL Output”.

DVI Output

Mode B

• If you set up the PAL TV system, DVI output frame

rate is 50 Hz.

TV ASPECT

4:3 Letter Box

4:3 Pan Scan

16:9 Wide

Setting up TEST

The test output signals come clockwise starting from

the Front Speaker(L). Adjust Channel Balance to

match to the volume of test signals memorized in

the system.

DVI Output

Mode B

TV Aspect

FRONT(L) ➝➝CENTER ➝➝SUBWOOFER ➝

Depending on the type of television you have, you may

want to adjust the screen setting (aspect ratio).

DVI Output

FRONT(R) ➝➝SURROUND(R) ➝➝SURROUND(L)

You can use this function to DVI output format.

• This function corrects a biased TV screen to secure a

normal view.

• If DVI Output is set incorrectly, the screen can be

biased.

1. 4:3 Letter Box : Select when you want to see the total

16:9 ratio screen DVD supplies, even though you have

a TV with a 4:3 ratio screen. Black bars will appear at

the top and bottom of the screen.

Important Note

Note

• In case of differ from your TV and TV system

setting value video output may be blocked.

How to make the SETUP menu disappear or return

to menu screen during set up. Press RETURN or

LEFT button.

2. 4:3 Pan Scan : Select this for conventional size TVs

when you want to see the central portion of the 16:9

screen. (Extreme left and right side of movie picture

will be cut off.)

• You have to setup TV system correctly.

Important Note

• Refer to your TV user's manual.

• The subwoofer test output signal is lower than the

other speakers.

• Consult your TV User’s Manual to find out if your

TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual’s

instructions regarding Progressive Scan settings in

the TV’s menu system.

• If you use NTSC disc at PAL TV system, motion

picture may be distorted.

3. 16:9 Wide :You can view the full 16:9 picture on your

widescreen TV.

• The MPEG Multichannel logo is a trademark

registered by PHILIPS Corporation.

• If you use PAL disc at NTSC TV system, motion

picture may be distorted.

• If you set Front (L, R) “Small”, LFE (Subwoofer) is

set “On” automatically.

• If Video Output is set incorrectly, the screen can be

blocked. (See page 40)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-34

ENG-35

Setting Up the Parental Control

The Parental Control function works in conjunction with DVDs that have been assigned a rating which helps you

control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

Setting Up the Rating Level

6. Select the Rating Level you want using

UP/DOWN buttons.

For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play.

- To cancel the Rating Level, select No using RIGHT or

ENTER in Use Password.

1. With the unit in Stop mode, press the MENU

button.

5. Enter your password. The Re-enter Password

screen appears to confirm the password.

Enter your password again.

1. With the unit in Stop mode, press the MENU

button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

The player is locked (

e.g) Setting up in LEVEL6.

3. Select Parental Setup using UP/DOWN buttons,

CREATE PASSWORD

then press the RIGHT or ENTER button.

RATING LEVEL

Enter Password

Level 8 Adult

Level 7

Level 6

Level 5

Level 4

Level 3

Level 2

0 ~ 9

Level 1 Kids Safe

3. Select Parental Setup using UP/DOWN buttons,

CREATE PASSWORD

then press the RIGHT or ENTER button.

About the Change Password

4. Enter your password.

The Parental Setup screen appears.

Re-enter Password

- Highlight Change Password using UP/DOWN buttons.

- Press ENTER button.

4. Use RIGHT or ENTER to select Yes if you want

to use a password. The Enter Password screen

appears.

The Change Password screen appears.

- Enter your new password. Enter the new password again.

PASSWORD CHECK

0 ~ 9

Enter Password

PARENTAL SETUP

Note

Use Password

• How to make the SETUP menu disappear or

return to menu screen during set up;

Press RETURN or LEFT button.

0 ~ 9

• If you have forgotten your password, see page 40.

5. Select Rating Level using UP/DOWN buttons,

and press ENTER or RIGHT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-36

ENG-37

Controlling a TV with the Remote

Firmware upgrade

The remote can also be set up to control most TVs. To program the remote, use the code that

corresponds to your brand.

4. Press the ENTER button.

Firmware upgrade starts

Introduction

Samsung will often support the software upgrade to

improve the performance of this unit to the latest

status, through Samsung Internet Site

TV Codes

BRAND

ANAM

AIWA

CODE

BRAND

NORDMENDE

NOKIA

CODE

(www.samsung.com).

10, 11, 12, 13, 14, 15, 16, 17, 18

72, 73

Because the specially new mpeg4 codec continues

and it is appearing. What improvements are made

depends on the upgrade software you are using as

well as the software that your DVD-player contained

before the upgrade.

BANG&OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

PANASONIC

PHILPS

53, 54, 74, 75

06, 55, 56, 57

06, 56, 57

58, 59, 73, 74, 75

06, 56

45, 46

PHONOLA

PIONEER

RADIOLA

RADIOMARELLI

RCA

CONTINENTAL EDISON

5. In the middle of the writing, the tray will open

automatically. After taking out the disc, please

wait for about 2 minutes.

How to make an upgrade disc

19, 20, 23, 24, 25, 26, 27, 28, 29,

30 , 31, 32, 33, 34

DAEWOO

REX

Write the downloaded file onto a blank CD-R or

CD-RW disc, using the following settings:

EMERSON

FERGUSON

FINLUX

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

IMPERIAL

JVC

SABA

57, 72, 73, 74, 75

01, 02, 03, 04, 05, 06, 07, 08, 09

41, 42, 43, 44, 48

36, 37, 38, 39, 48

SALORA

SAMSUNG

SANYO

SCHNEIDER

SELECO

SHARP

SIEMENS

SINGER

SINUDYNE

SONY

1. You have to download a new file through

Download Center of Samsung Internet Site

(www.samsung.com).

6. If the unit was successfully updated, the unit will

turn off and on after closing the tray automatically.

When the unit turns on, this screen will display.

06, 49, 57

49, 52, 71

60, 72, 73, 75

61, 79

2. Write the file to Disc using CD-RW of your

computer.

Note

• File System CD-ROM ISO Level

• Character set ISO 9660

• Finalized, single session

• Write speed low

06, 19, 20, 21, 22, 78

35, 48

LOEWE

06, 69

06, 57

TELEAVA

TELEFUNKEN

THOMSON

LOEWE OPTA

MAGNAVOX

METZ

67, 73, 75, 76

72, 73, 75

7. Select the desired language.

THOMSON ASIA 80, 81

MITSUBISHI

MIVAR

NEC

NEWSAN

NOBLEX

06, 48, 62, 65

52, 77

TOSHIBA

WEGA

YOKO

47, 48, 49, 50, 51, 52

Note • If the “Select Menu Language” does't

appears, please contact to “Samsung

Service Center”.

Upgrade procedure

• Do not press any button and unplug

the power code during upgrade.

1. Press OPEN/CLOSE to open the disc tray.

2. Insert the upgrade CD-R disc, label facing up.

3. Press OPEN/CLOSE to close the disc tray.

ZENITH

• The upgrade procedure may change,

refer to the web site

(www.samsung.com).

1. Turn on the TV.

4. If the TV turns off, setup is complete.

Enter other codes of the same brand if the first

code does not work.

Firmware upgrade appears on the display

2. Point the DVD’s remote at the TV.

3. While holding the TV POWER button down, enter

the code for your brand.

5. To operate the TV, use the “TV Function Buttons”

described on page 8.

Important Note

e.g) For Samsung 2 TVs

• The remote may not be able to control every

model TV of the brands listed.

• If you replace the remote control's batteries, set

the brand code again.

While holding down the TV POWER button,

enter 0 and then 1.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-38

ENG-39

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Action

Problem

Page

Problem

Page

• Check the batteries in the remote. They may need replacing.

• Operate the remote control at a distance of no more than 20 feet.

• Remove batteries and hold down one or more buttons for several

minutes to drain the microprocessor inside the remote to reset it.

Reinstall batteries and try to operate the remote again.

• Check the Video output is DVI enabled.

• Check the connection between the TV and the DVI

jack of DVD player.

No operations can be

performed with the remote.

No DVI output.

P11~12

• See if the TV supports this 480p/576p/720p/768p/1080i DVD player.

• Ensure that the disc is installed with the label side facing up.

• Check the region number of the DVD.

• If snow noise appears on the screen, it means

that TV does not support HDCP (High-bandwidth Digital Content

Protection).

Disc does not play.

Abnormal DVI output

screen.

P12

P35

5.1 channel sound is not

being reproduced.

• 5.1 channel sound is reproduced only when the following conditions

are met. :

1) The DVD player is connected with the proper amplifier

2) The disc is recorded with 5.1 channel sound.

• Check whether the disc being played has the “Dolby 5.1 ch” mark

on the outside.

• Check if your audio system is connected and working properly.

• In a SETUP Menu, is the Audio Output set to Bitstream?

• Check your TV system setup correctly.

DVI output Judder

• The screen judder phenomenon may occur when frame rate is

converted from 50Hz to 60Hz for 720P/1080i DVI(Digital Visual

Interface) Output.

•

Refer to your TV users manual.

P32

• The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.

The

screen.

icon appears on

2. The DVD’s software doesn’t support the feature (e.g., angles).

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is

out of range.

P13

Disc Menu doesn’t appear.

• Check if the disc has a Menu.

Play mode differs from the

Setup Menu selection.

• Some of the functions selected in the Setup Menu may not work

properly if the disc is not encoded with the corresponding function.

P30~37

The screen ratio cannot

be changed.

• The Screen Ratio is fixed on your DVDs.

P34~35

P32~34

• Make sure you have selected the correct Digital Output in the Audio

Options Menu.

No audio.

• Press power on from a cold start with no disc in the unit.

The screen is blocked

Press the SEARCH/SKIP (

second. The SELECT MENU LANGUAGE display will appear.

Select the number button of the desired language.

) button on the front panel for 5

P34~35

P36~37

• Press power on from a cold start with no disc in the unit.

Press the SEARCH/SKIP (

Forgot password

) button on the front panel for 5

second. The SELECT MENU LANGUAGE display will appear.

Select the number button of the desired language. Press the MENU

button, and then press DOWN button to select Setup, then press

RIGHT or ENTER. Press Up or Down to select Parental Setup The

Parental Setup is now unlocked as indicated on the display.

You can change your password.

If you experience other

problems.

• Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and follow

the procedure once again.

• If the problem still cannot be solved, please contact your nearest

authorized service center.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-40

ENG-41

Specifications

Power Requirements

AC 230 V, 50 Hz

Power Consumption

Weight

14 W

1.9 Kg

General

Dimensions

430mm (W) X 207mm (D) X 50mm (H)

+5°C to +35°C

Operating Temperature Range

Operating Humidity Range

10 % to 75 %

Reading Speed : 3.49 ~ 4.06 m/sec.

Approx. Play Time

DVD

(DIGITAL VERSATILE DISC)

(Single Sided, Single Layer Disc) : 135 min.

CD : 12Cm

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

(COMPACT DISC)

Disc

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

CD : 8Cm

(COMPACT DISC)

Reading Speed : 4.8 ~ 5.6 m/sec.

VCD : 12Cm

Maximum Play Time : 74 min. (Video + Audio)

1 channel : 1.0 Vp-p (75 Ω load)

Composite Video

R(Red) : 0.7 Vp-p (75 Ω load)

G(Green) : 0.7 Vp-p (75 Ω load)

B(Blue) : 0.7 Vp-p (75 Ω load)

Composite Video : 1.0 Vp-p (75 Ω load)

Luminance Signal : 1.0 Vp-p (75 Ω load)

Color Signal : 0.3 Vp-p (75 Ω load)

SCART Jack

Video

Output

Y : 1.0 Vp-p (75 Ω load)

Pr : 0.70 Vp-p (75 Ω load)

Pb : 0.70 Vp-p (75 Ω load)

Component Video

Luminance Signal : 1.0 Vp-p (75 Ω load)

Chrominance Signal : 0.3 Vp-p (75 Ω load)

S-VIDEO

DVI

Digital Visual Interface

2 Channel : L(1/L), R(2/R)

L(1/L), R(2/R)

SCART Jack

2 Channel

F/L, F/R, R/L, R/R, C/T, S/W

5.1 Channel

Audio

48 kHz Sampling : 4 Hz to 22 kHz

96 kHz Sampling : 4 Hz to 44 kHz

*Frequency Response

Output

*S/N Ratio

110 dB

100 dB

0.004 %

*Dynamic Range

*Total Harmonic Distortion

*: Nominal specification

• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

• Weight and dimensions are approximate.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-42

PYLE Audio Stereo Receiver PLMD8 User Guide
Pyramid Car Audio Car Amplifier PB1217X User Guide
RCA CRT Television F26433 User Guide
Remington Electric Shaver R 830 User Guide
Rheem Water Heater RTG 53DV User Guide
Roland Cassette Player AR 200S User Guide
Rosewill Power Supply RU 103 User Guide
Russound Speaker RC61 User Guide
Samsung Washer Dryer DC68 02040A 01 User Guide
Seagate Computer Drive SRN01C User Guide