DVD-C621COVER 7/19/02 10:47 AM Page 2
SAMSUNG ELECTRONICS AMERICA INC.
105 CHALLENGER ROAD, RIDGEFIELD PARK,
NJ 07660 U.S.A.
DVD PLAYER
FOR YOUR NEAREST SAMSUNG
SERVICE CENTER
DIAL 1-800-SAMSUNG
AK68-00029A
DVD-C621
US
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 2
Pre ca u tio n s
Pre ca u tio n s
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
To reduce the risk of fire
or shock hazard, do not
expose this DVD player
to rain or moisture.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216, 4,819,098 and 4,907,093
and other intellectual property rights. The use of Macrovision’s copy protection technology in the
device must be authorized by Macrovision and is intended for home and other limited pay-per-view
uses only, unless otherwise authorized in writing by Macrovision.
CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Reverse engineering or disassembly is prohibited.
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu au fond.
Ha n d lin g Ca u tio n s
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions,
use shielded cables and connectors for connections.
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this
occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Disc Sto ra g e
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
This class B digital apparatus meets all requirements of the Canadian Interference --
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
Causing Equipment Regulations
.
• Keep in a clean protection jacket.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
Ma in te n a n ce o f Ca b in e t
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 4
Sa fe ty In stru ctio n s
Sa fe ty In stru ctio n s
1. Read Instructions-All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions-All operating and using instructions should be followed.
5. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
16. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
17. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
7. Water and Moisture-Do not use this product near water-for example near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket,
or table.
18. Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
The product may fall, causing serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with the product. Any mounting of the product should follow
the manufacturer’s instructions and should use a mounting accessory recommended
by the manufacturer.
a
b
c
d
When the power-supply cord or plug is damaged.
If liquid has been spilled or objects have fallen into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product
to its normal operation.
9. Cart Usage-A product and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating. These openings must not be blocked or covered.
The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
11. Power Sources-This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
e
f
If the product has been dropped or damaged in any way.
When the product exhibits a distinct change in performance-this indicates a need for service.
20. Replacement Parts-When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
21. Safety check-Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
22. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
12. Grounding or Polarization-This product may be equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14. Lightning-For added protection for this product during a lightning storm or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line surges.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 6
Be fo re Yo u Sta rt
TABLE O F CO N TEN TS
Acce sso rie s
............................................................................................................
General Features
8
Disc Type and Characteristics ........................................................................................ 9
Description-Front Panel ................................................................................................10
Description-Rear Panel..................................................................................................1 1
Tour of the Remote Control ............................................................................................12
Choosing a Connection ................................................................................................14
Batteries for Remote Control
(AA Size) (4301-000117)
Remote Control (AH59-00093R)
Playing a Disc ..............................................................................................................16
Operating the Disc Changer..........................................................................................18
Using the Search & Skip Functions ..........................................................................19
Using the Display Function ............................................................................................20
Repeat Play ..................................................................................................................21
Program Play & Random Play........................................................................................22
User’s Manual (AK68-00029A)
Video/ Audio Cable
(AC39-42001R)
S.FIT Play ....................................................................................................................23
Digest Play ..................................................................................................................24
Using the Disc View Function ........................................................................................25
Slow Repeat play..........................................................................................................26
Selecting the Audio Language ......................................................................................27
Selecting the Subtitle Language......................................................................................28
Changing the Camera Angle ........................................................................................29
Using the Instant Replay Function ..................................................................................30
Using the Bookmark Function ........................................................................................31
Using the Zoom & 3D Sound Functions............................................................................................32
MP3 Play ....................................................................................................................33
If re m o te d o e sn ’t o p e ra te
p ro p e rly :
In sta ll Ba tte rie s in th e
Re m o te
• Check the polarity + - of the batteries
(Dry-Cell)
Open the battery cover on the
back of the remote.
1
2
• Check if the batteries are drained.
Insert two AA batteries. Make
sure that the polarities (+ and -)
are aligned correctly.
Using the Setup Menu ..................................................................................................35
Setting Up the Language Features ..................................................................................36
Setting Up the Parental Control......................................................................................38
Setting Up the Audio Options ........................................................................................39
Setting Up the Display Options ......................................................................................40
• Check if remote sensor is blocked by
obstacles.
Replace the battery cover.
3
• Check if there is any fluorescent
lighting nearby.
Controlling a TV with the Remote ..................................................................................41
Troubleshooting ............................................................................................................42
Specifications ..............................................................................................................43
Warranty ....................................................................................................................44
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 8
Ge n e ra l Fe a tu re s
Disc Ty p e a n d Ch a ra cte ristics
This DVD player is capable of playing the following types of discs with the
corresponding logos:
DVD Changer
The DVD Changer holds 5 discs and provides
full random play with fast disc changes.
Various On-Screen Menu Functions
You can select various
languages(Audio/ Subtitle) and screen
angles while enjoying movies.
Disc Types
(Logos)
Recording
Types
Max.
Playing Time
Disc Size
Characteristics
Excellent Sound
Dolby Digital, a technology
developed by Dolby Laboratories provides
crystal clear sound reproduction.
Repeat
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
DVD
You can repeat a song or movie simply by
pressing the REPEAT button.
5"
Audio
+
Video
Screen
Single-sided
80 min.
Double-sided
160 min.
MP3
Both regular and widescreen(16:9) pictures
can be viewed.
This unit can play discs created from MP3
files.
31/2"
5"
Slow Motion
An important scene can be viewed in slow
motion.
Instant Replay
VIDEO-CD
AUDIO-CD
This function is used to replay the previous
10 seconds of the movie from the current
position.
74 min.
20 min.
74 min.
20 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
Audio
+
Video
Programmed Play
You can program tracks to play in desired
order.
31/2"
NOTE
* Discs which cannot be played with this player :
Parental Control
• DVD-ROM
• CD-ROM
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
• DVD-RAM
• CDV
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
5"
Audio
31/2"
* Ability to play back may depend on recording
conditions :
• DVD-R
• CD-RW
• DVD+RW, -RW
Disc Ma rk in g s
DIGITAL
SOUND
~
STEREO
NTSC
CO PY PRO TECTIO N
• Digital
• DTS disc
• MP3 disc
• Play
Region
Number
• NTSC broadcast • Dolby
• Stereo disc
system in U.S.A,
Canada, Korea,
Japan, etc.
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
Audio disc
Digital disc
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Pla y Re g io n N u m b e r
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc
to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 10
De scrip tio n -Fro n t Pa n e l
De scrip tio n -Re a r Pa n e l
1
2
3
4
5
S-VIDEO
VIDEO OUT
SELECT
Y,Pb,Pr
Fro n t Pa n e l Co n tro ls
STANDBY/ ON
• Use to turn your player on and off (standby).
STANDBY LAMP
• When the unit is first plugged in, the indicator lights.
When power is pressed on, the lamp goes out.
EXCHANGE
• Press this button when you want to change a disc
without stopping playback of the current disc.
DISC SKIP
1.
2.
7.
DVD CHANGER(TRAY)
• Press OPEN/ CLOSE to open and close the
disc changer.
FRONT DISPLAY
• Operation indicators are displayed here.
PLAY/ PAUSE
• Begin or pause disc play.
SKIP/ SEARCH
• Use to skip or search a scene or music.
STOP
• Stops disc play.
OPEN/ CLOSE
8.
Re a r Pa n e l
3.
4.
9.
10.
11.
12.
DIGITAL AUDIO OUT JACKS
1.
•
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/ V Amplifier that contains a Dolby Digital or DTS decoder.
• Use to skip a disc in order.
5. HEADPHONES JACK
• You can attach headphones here for private listening.
VOLUME LEVEL
• Use to adjust headphones volume level.
ANALOG AUDIO OUT JACKS
2.
3.
4.
6.
•
Connect to the Audio input jacks of your television, audio/ video receiver, or VCR.
• Press to open and close the disc tray.
13. DISC SELECT
• Use to select the desired disc loaded in the
DVD CHANGER.
VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be
selected in the VIDEO OUT SELECT.
S-VIDEO OUT JACK
5.
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6. VIDEO OUT SELECT SWITCH
Fro n t Pa n e l Disp la y
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
1.
10.
11.
12.
13.
14.
Dolby Digital Disc
DTS (Digital Theater System) output
MP3 indicator
Angle indicator. You can select multiple angles
of a scene recorded by different cameras.
Disc type indicators
Reverse play / Pause / Forward play
Lights when 3D surround is turned on.
DVD : Title number
DVD : Chapter number.
Video/ Audio CD : Track number
Repeat play mode
2.
3.
4.
5.
6.
7.
8.
9.
MPEG-2 Audio output
Displays various messages concerning
operations such as PLAY, STOP, LOAD, ...
no DISC : No disc loaded.
NOTE
OPEN
LOAD
: The disc tray is open.
: Player is loading disc information.
• Select the VIDEO OUT SELECT switch in the STOP or Power off mode.
Linear PCM audio output
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 12
To u r o f th e Re m o te Co n tro l
To u r o f th e Re m o te Co n tro l
DVD Fu n ctio n Bu tto n s
19.
1.
1
2
OPEN/ CLOSE Button
17
18
DVD POWER Button
NUMBER Buttons
2.
3.
20.
21.
22.
CHANNEL Buttons
DIGEST Button
STEP Button
• Advances play one frame at a time.
PLAY/ PAUSE Button
• Begin/ Pause disc play.
VOLUME Buttons
TV/ VIDEO Button
ZOOM Button
S.FIT Button
4.
5.
6.
7.
8.
23.
SKIP Buttons
• Use to skip the title, chapter, or track.
3
24.
25.
BOOKMARK Button
4
5
DISPLAY Button
• Displays the current disc mode.
SEARCH Buttons
19
20
•
Allows you to search forward/ backward
through a disc.
26.
27.
28.
29.
AUDIO Button
• Use this button to access various audio
functions on a disc.
6
7
9.
STOP Button
21
10.
RETURN Button
ENTER/ DIRECTION Button
• Returns to a previous menu.
8
9
(UP/ DOWN or LEFT/ RIGHT Button)
• This button functions as a toggle switch.
22
11.
SETUP Button
• Brings up the DVD player’s Setup menu.
23
24
TOP MENU Button
• Takes you to the menu on the DVD disc or
CD/ VCD.
10
11
12
12.
13.
SUBTITLE Button
ANGLE Button
• Use to access various camera angles on a DVD.
25
26
REPEAT Button
• Allows you to repeat play a title, chapter,
track, or disc.
13
MENU Button
• Brings up the Disc menu.
14.
15.
27
30.
31.
MODE Button
• Allows you to program a specific order.
CLEAR Button
• Use to remove menus or status displays from
the screen.
28
29
14
I. REPLAY Button
•
This function is used to replay the previous 10
seconds of the movie from the current position.
16.
17.
18.
30
31
SLOW Button
TV POWER Button
3D Button
15
16
DISC SKIP
• Use to skip a disc in order.
32.
32
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 14
Ch o o sin g a Co n n e ctio n
Ch o o sin g a Co n n e ctio n
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Co n n e ctio n to a TV (Fo r Vid e o )
TV (Normal, Widescreen, Projection, etc..)
Be fo re Co n n e ctin g th e DVD Pla y e r
Method 1
Method 2
Method 3
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
Good picture
Basic Audio
Better picture
Best picture
• Refer to the owner’s manual of the additional components you are
connecting for more information on those particular components.
TV
Co n n e ctio n to a n Au d io Sy ste m
AV Cable
S-Video
Cable
Video Cables
Method 1
Method 2
OR
OR
AUDIO
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
DVD
Video Output Jack
Component Video
Jacks
Audio Output Jacks
S-Video Jack
OR
• Method 1
• Method 2
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
DVD
• Method 3
Analog Audio Out
Digital Audio Out
NOTE
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 16
Pla y in g a Disc
Pla y in g a Disc
Step Motion Play (Except CD)
Be fo re Pla y
7
8
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
• Turn on your TV and press the TV/ VIDEO button to select the video mode.
• Turn on your Audio System and select AUX, CD or DVD.
- Press PLAY/ PAUSE to resume normal play.
(You can only perform step motion play in the forward direction.)
After plugging in the player, the first time you press the DVD POWER
button, this screen comes up :
Slow Motion Play (Except CD)
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
Press the FWD SEARCH or REV SEARCH button on the remote during PAUSE or STEP mode.
- By pressing the FWD SEARCH or REV SEARCH button, you can select slow motion play for
1/ 8, 1/ 4 or 1/ 2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/ PAUSE to resume normal play.
- When playing a VCD, the reverse slow motion play will not work.
Pla y
Press the OPEN/ CLOSE button.
1
The STANDBY indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’s label
2
3
4
5
6
facing up.
Press the PLAY/ PAUSE button or OPEN/ CLOSE button
to close the disc tray.
Stopping Play
Press the STOP button during play.
RESUME fu n ctio n
Removing Disc
Press the OPEN/ CLOSE button.
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up
where you left off. (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.)
Pausing Play
Press the PLAY/ PAUSE or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/ PAUSE button once again.
NOTE
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in left in the stop mode for more than 30 minutes, the power will autonatically shut off.
(Automatic Power - Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen saver
will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to resume
normal play.
• This
icon indicates an invalid button press.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:44 AM Page 18
O p e ra tin g th e Disc Ch a n g e r
Usin g th e Se a rch & Sk ip Fu n ctio n s
The DVD Changer holds 5 discs and provides full random play with fast disc changes.
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Ex ch a n g in g Discs
Exchange allows you to change up to 4 discs except the
disc currently playing.
Se a rch in g th ro u g h a Ch a p te r o r Tra ck
During play, press the FWD SEARCH (ï) or REV SEARCH (î)
button on the remote.
Press the EXCHANGE button on the front of the
DISC EXCHANGE
1
2
player when in the play mode. The tray opens
with two slots available for you to load or
change discs.
1
• Press the REVERSE or FORWARD SEARCH button on the remote and press
again to search at a faster speed on the DVD, VCD, CD.
Press the DISC SKIP button on the remote or on
the front of the player to turn the platter to the
other two slots. Load or change the third and
fourth discs.
DVD 2X, 4X, 8X, 16X, 32X, 128X
VCD 4X, 8X
CD
2X, 4X, 8X
• To change all the discs, first press the STOP button, then the
OPEN/ CLOSE and DISC SKIP buttons.
• Depending on the disc, audio may not be heard when a disc is in 2X play mode.
Press the EXCHANGE, OPEN/ CLOSE or the
desired number's DISC SELECT button on the
front of the player to close the disc tray.
3
Sk ip p in g Tra ck s
During play, press the NEXT SKIP(ï ) or BACK SKIP( î)
button.
1
Usin g th e DISC SKIP fu n ctio n
• When playing a DVD, if you press the NEXT SKIP button, it moves to the
next chapter. If you press the BACK SKIP button, it moves to the
beginning of the chapter.
Use the Disc Skip function to change to another of the
discs currently in the disc platter.
One more press makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if
you press the NEXT SKIP button, it moves to the next track.
If you press the BACK SKIP button, it moves to the beginning of the
track. One more press makes it move to the beginning of the previous
track.
While in play or stop mode, press the DISC
1
2
SKIP button. The platter turns clockwise to the
next available disc.
To directly select a disc, press the desired
number of the DISC SELECT buttons on the front
of the unit to play back the disc in the desired
number's slot.
• If a track exceeds 15 minutes when playing a VCD and you press the NEXT
SKIP button, it moves forward 5 minutes.
If you press the BACK SKIP button, it moves backward 5 minutes.
• When playing a VCD 2.0 in the MENU OFF or Track View function,
if you press the NEXT SKIP button, it moves to the next MENU or the
next Track View display.
• Empty disc slots are automatically skipped during disc skip.
If you press the BACK SKIP button, it moves to the previous
MENU or the previous Track View display. (See page 25.)
19
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 20
Usin g th e Disp la y Fu n ctio n
Re p e a t Pla y
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
W h e n Pla y in g a DVD
During play, press the DISPLAY button on
the remote.
1-DVD
1
T : 01
W h e n p la y in g a DVD
- Current title, chapter number, elapsed time, audio,
subtitle and volume control will be displayed.
• Use the NUMBER buttons to enter a different title,
then press the ENTER button.
C : 02
DVD
0 : 01 : 09
ENG 5.1CH
Press the REPEAT button on the remote. Repeat
screen appears.
1
• Use the LEFT/ RIGHT or NUMBER buttons to enter
a chapter number, then press the ENTER button.
• To enter the time from which you want to start,
use the UP/ DOWN buttons to select, then use the
NUMBER buttons to enter the time. Then press the
ENTER button.
A
ENG
64
Select Chapter, Title or A-B using the
LEFT/ RIGHT buttons.
2
- Repeat A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/ RIGHT buttons or press the A-B button on the remote.
• Press ENTER at the point where you want the repeat play
to start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play
to stop (B).
• Use the LEFT/ RIGHT buttons to change the values
of the current audio, subtitle and volume.
• To make the screen disappear, press the DISPLAY
button again.
VCD/ CD
Press ENTER.
W h e n Pla y in g a CD/ VCD
3
4
VCD
CD
1-VCD
T : 01
0 : 01 : 09
64
During play, press the DISPLAY button on
the remote.
To return to normal play, press REPEAT again,
then press the LEFT/ RIGHT buttons to select Off
and press ENTER.
1
- Current track number, elapsed time and volume
control will be displayed.
• Use the UP/ DOWN buttons to select a track.
Use the LEFT/ RIGHT buttons or NUMBER buttons
to enter a different track number, then press the
ENTER button.
1-CD
T : 01
0 : 01 : 09
64
• To enter the time from which you want to start,
use the UP/ DOWN buttons to select, then use the
NUMBER buttons to enter the time.
Press the ENTER button.
NOTE
NOTE
• To change the value of the volume, use the
LEFT/ RIGHT buttons.
•
•
What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
See page 33 to MP3 disc repeat play.
- To make the screen disappear, press the DISPLAY
button again.
• Depending on the disc, the Repeat function may not work.
What is a Title?
• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
In VCD 2.0 mode (MENU ON mode), only the
volume control will appear on screen.
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
*
21
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 22
Pro g ra m Pla y & Ra n d o m Pla y
S.FIT Pla y
Pro g ra m Pla y (DVD/ VCD/ CD)
Scre e n Fit Pla y
PROGRAM 01
Press the MODE button.
During play, press S.FIT button on remote
control.
- Allows you to eliminate the black bars in the top and
bottom of the screen when a movie is playing in the
Widescreen format(16:9).
DISC
1.DVD
2. ---
3.CD
4. ---
5.VCD
1
2
Chap. (T:01)
Program order
1
(ALL)
01 02 03 04
05 06 07 08
Use the LEFT/ RIGHT buttons to select
PROGRAM. Press the ENTER button.
All discs in the unit will be read first.
RETURN
CLEAR
ENTER
PLAY
- Screen Fit will not work when the Zoom mode is active.
(you can not remove the black bars on the screen)
However, Zoom mode will work when Screen Fit is active.
PROGRAM 02
Use the LEFT/ RIGHT buttons to select the first
chapter (or track) to add to the program. Press
the ENTER button. The selection numbers appear
in the Program Order box.
DISC
1.DVD
2. ---
3.CD
4. ---
5.VCD
3
4
Chap. (T:01)
(ALL)
Program order
1.02
01 02 03 04
05 06 07 08
RETURN
CLEAR
ENTER
PLAY
Press the PLAY/ PAUSE button. The disc will be
played in programmed order.
• Use the DISC SKIP key to program another disc.
Ra n d o m Pla y (DVD/ VCD/ CD)
PROGRAM
RANDOM
Press the MODE button.
1
2
3
Use the LEFT/ RIGHT buttons to select RANDOM.
Press the ENTER button.
Press Left/ Right buttons to select All discs or Disc.
The disc(s) will be played in random order.
NOTE
NOTE
• Various aspect ratios are available only in multiple screen format discs.
• Depending on the disc, the Program and Random Play function may not work.
• When in VCD 2.0 mode (MENU ON mode), these functions do not work.
• To resume normal play, press the CLEAR button.
• This function does not work when a DVD has been recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
• Random Play can only operate when the discs are the same type.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 24
Dig e st Pla y
Usin g th e Disc Vie w Fu n ctio n
Dig e st Pla y
Tra ck Vie w (VCD)
Displays the beginning view of each track and the
track number.
During play, press the DIGEST button.
1
2
- You'll see the 9 individual windows representing each of the
chapters on the TV screen.
During play, press the TOP MENU button.
1
- When each window is displayed, the first 3 seconds of the
chapter will be played.
Press the UP/ DOWN buttons to select TRACK
2
3
VIEW. Press the ENTER button.
SKIP button
Select the desired view by pressing the
UP/ DOWN or LEFT/ RIGHT buttons.
- Press the SKIP button for the next 9 tracks if
the movie has more than 9.
Press UP/ DOWN/ LEFT/ RIGHT buttons or
NUMBER buttons to select the window you'd like
to see, and press the ENTER button.
- Up to 9 windows(chapters) can be displayed on the screen
at a time.
Press the ENTER button.
- This function is available with the VCD Menu
mode off.
4
- Press the 'Skip' button for the next 9 chapters if the movie
has more than 9.
In d e x Vie w (VCD)
Displays the equally divided 9 views of the current
playing track.
During play, press the TOP MENU button.
1
Press UP/ DOWN buttons to select INDEX
2
3
4
VIEW. Press the ENTER button.
Select the desired view by pressing
UP/ DOWN or LEFT/ RIGHT buttons.
Press the ENTER button.
NOTE
NOTE
• You can play the DVD player starting with the desired chapter after directly moving to the scene you want.
• 'DIGEST' may not operate depending on the disc in use.
•
•
When pressing the TOP MENU button with a DVD; the disc’s TITLE MENU function comes up. A disc must
have at least two titles for the TITLE MENU function to work.
When pressing the TOP MENU button with a CD; the unit enters the INTRO mode. INTRO lets you listen
to the beginning of each track for about 10 seconds.
• You can also operate it using the DIGEST button.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 26
Slo w Re p e a t p la y
Se le ctin g th e Au d io La n g u a g e
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
You can select a desired language quickly and easily with the AUDIO button.
Usin g th e AUDIO b u tto n
Press the AUDIO button.
DVD
1
W h e n p la y in g a DVD
Use the UP/ DOWN buttons to select the
desired language on a DVD.
During play, press the PLAY/ PAUSE button.
2
1
VCD/ CD
- The audio languages are represented by
abbreviations.
Press the F/ SEARCH button to choose the play speed between 1/ 8X, 1/ 4X, and
2
3
4
1/ 2X of normal.
Use the UP/ DOWN buttons to select
Stereo, Right or Left. (On VCD/ CD)
3
Press the REPEAT (A-B) button to select the point where the function starts (A).
Press the REPEAT (A-B) button to select the point where the function ends (B).
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
•
How to have the same audio language come up whenever you play a DVD;
NOTE
Refer to “Setting Up the Language Features” on page 37.
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT (A-B)' button again.
Then press play to resume normal playback.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 28
Se le ctin g th e Su b title La n g u a g e
Ch a n g in g th e Ca m e ra An g le
You can select a desired subtitle quickly and easily with the SUBTITLE button.
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
Usin g th e AN GLE b u tto n
Usin g th e SUBTITLE b u tto n
Press the ANGLE button to see if an ANGLE (
mark is present at the upper right hand corner of
the screen.
)
Press the SUBTITLE button.
A
1
Use the UP/ DOWN buttons to select the
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
2
3
desired subtitle language.
1
A
Use the LEFT/ RIGHT buttons to determine
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
Use the UP/ DOWN buttons to select the
desired screen angle.
- The subtitle languages are represented by abbreviations.
2
3
To turn off the display, press the ANGLE
button again.
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
•
How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 37.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 30
Usin g th e In sta n t Re p la y Fu n ctio n
Usin g th e Bo o k m a rk Fu n ctio n
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
Usin g th e In sta n t Re p la y fu n ctio n (DVD)
Usin g th e Bo o k m a rk Fu n ctio n (DVD/ VCD)
If you miss part of a scene, you can see it again
using this function.
During play, press the BOOKMARK button on the
1
2
3
remote. The Bookmark icons will be displayed.
If you press the I.REPLAY button, the current
scene moves backward about 10 seconds,
and plays back.
1
Use the LEFT/ RIGHT buttons to move to the
desired bookmark icon.
* Depending on the disc, the Instant Replay function
may not work.
When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
Press the BOOKMARK button to turn off the
display.
4
Re ca llin g a Ma rk e d Sce n e
During play, press the BOOKMARK button on
the remote.
1
2
3
Use the LEFT/ RIGHT buttons to select a
marked scene.
Press the PLAY/ PAUSE buttons to skip to the
marked scene.
Cle a rin g a Bo o k m a rk
NOTE
During play, press the BOOKMARK button
on the remote.
1
2
3
• Up to three scenes may be
marked at a time.
Use the LEFT/ RIGHT buttons to select the
bookmark number you want to delete.
• When in VCD 2.0 mode (MENU
ON mode), this function does not
work.
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
• Depending on the disc, the
Bookmark function may not work.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 32
Usin g th e Zo o m & 3 D So u n d Fu n ctio n s
MP3 Pla y
When an MP3 Disc is inserted into the DVD PLAYER, the first song file of the first folder plays.
Usin g th e Zo o m Fu n ctio n (DVD/ VCD)
During play or pause mode, press the
ZOOM button on the remote.
A square will be displayed on screen.
MP3 Pla y Fu n ctio n
1
2
3
Press STOP to stop playback of the first song file, then
Use the UP/ DOWN or LEFT/ RIGHT
buttons to select the part of the screen you
want to zoom in on.
1
press RETURN to display the music folder menu on the
right side of the screen. Up to 8 music folders can be
displayed at a time. If you have more than 8 folders
on a disc, press the LEFT/ RIGHT buttons to bring them
up on the screen.
Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/ 4X/ 2X/ normal in order.
- During VCD play, press ENTER to zoom in
2X/ normal in order.
Use the UP/ DOWN buttons to select the desired music
folder, the press ENTER. Use the UP/ DOWN buttons
again to select a song file. Press ENTER to begin
playback of the song file.
2
Usin g th e 3 D So u n d Fu n ctio n
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
Pro g ra m / Ra n d o m p la y b a ck
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
Press the MODE button to switch between the RANDOM
and PROGRAM modes. See page 22 for more information
on these modes.
NOTE
During play, press the 3D button.
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. However, some of
these discs do not contain rear channel
sound signals.
1
2
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set to
PCM.)
NOTE
• Depending on the disc, the Zoom and
3D Sound function may not work.
Press the UP/ DOWN buttons to turn the 3D
Sound feature on or off.
•
•
A musical note is displayed next to the file currently playing.
Press the REPEAT button to hear a song file repeatedly (check mark will appear next to file). Press Repeat again
to release the Repeat mode.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 34
MP3 Pla y
Usin g th e Se tu p Me n u
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of television
screen you have.
CD-R MP3 d isc re q u ire m e n ts
When playing CD-R MP3 discs, please follow the recommendations below:
With the unit in Stop mode, press the SETUP button
on the remote.
1
• Your MP3 files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and with
Apple's Mac. These two formats are the most widely used.
Player Menu : Setup of the Display Language
Use the Player preference menu to select the
language for the player’s on-screen displays.
• When naming your MP3 files do not exceed 8 characters, and place ".mp3" as the file extension.
General name format of: Title.mp3. When composing your title, make sure that you use 8 characters or
less, have no spaces in the name, and avoid the use of special characters including: (.,/ ,\ ,=,+).
Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the language you want a
DVD’s disc menu to be displayed in.
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/ decompression you choose.
Getting audio CD quality sound requires an analog/ digital sampling rate (conversion to MP3 format) of at
least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely
give better sound quality.
Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack language.
Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the language the disc’s
subtitles are to be displayed in.
Conversely, files with sampling rates below 128 Kbps will not be played properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of
Parental : Setup of the Parental Level
TM
the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMI (registered
Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence, adult subject
matter, etc.
trade mark of The SDMI Foundation). You cannot copy such files.
• Your DVD player only accepts one level of file directory.
Consequently you must choose:
Audio Options : Setup of the Audio Options
Display Options : Setup of the Display Options
Use to select which type of screen you want to watch and several
display options.
-either to save all your MP3 recording files at the root of the disc;
-and/ or create folders in the directory for each artist or music type (e.g.classical, rock, jazz, etc)
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play
MP3 recordings, or as an assurance of sound quality.
Use the UP/ DOWN buttons on the remote to access
the different features.
2
3
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal
playback of these files on your DVD player (degraded sound quality and in some cases, inability of the
player to read the files).
Press the ENTER button to access the sub features.
To make the setup screen disappear after setting up, press the
SETUP button again.
NOTE
• Depending on the disc, some Setup Menu selections may not work.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 36
Se ttin g Up th e La n g u a g e Fe a tu re s
Se ttin g Up th e La n g u a g e Fe a tu re s
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Usin g th e Au d io La n g u a g e
With the unit in Stop mode, press the SETUP
button.
Usin g th e Pla y e r Me n u La n g u a g e
1
2
3
4
e.g
Setting up in English.
Press the UP/ DOWN buttons to move to AUDIO.
With the unit in Stop mode, press the
SETUP button.
1
2
3
4
5
Use the UP/ DOWN buttons to select the
PLAYER MENU.
Press the ENTER button.
Press the ENTER button.
Press the UP/ DOWN buttons to select ‘ENGLISH’ .
Use the UP/ DOWN buttons to select
‘English’.
- Select “Original” if you want the default soundtrack language
to be the original language the disc is
recorded in.
Press the ENTER button.
- Select “Others” if the language you want is not listed.
Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
5
- English is selected and the screen returns to SETUP MENU.
- To make the SETUP MENU disappear, press the
RETURN button.
Usin g th e Su b title La n g u a g e
Usin g th e Disc Me n u La n g u a g e
With the unit in Stop mode, press the SETUP
button.
1
2
3
4
This function changes the text language only
on the disc menu screens.
e.g
Setting up in English.
Use the UP/ DOWN buttons to select SUBTITLE.
With the unit in Stop mode, press the
SETUP button.
1
2
3
4
Press the ENTER button.
Use the UP/ DOWN buttons to select
DISC MENU.
Use the UP/ DOWN buttons to select ‘English’.
Press the ENTER button.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some
discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
NOTE
Use the UP/ DOWN buttons to select
‘English’.
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
- Select “Others” if the language you want is not listed.
Press the ENTER button.
•
How to make the SETUP MENU
return to menu screen
5
Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
disappear or
during set up; Press RETURN button.
5
- English is selected and the screen returns to SETUP MENU.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 38
Se ttin g Up th e Pa re n ta l Co n tro l
Se ttin g Up th e Au d io O p tio n s
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
With the unit in Stop mode, press the SETUP
button.
1
2
3
Use the UP/ DOWN buttons to select AUDIO
OPTIONS. Then press the ENTER button.
With the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
Use the UP/ DOWN buttons to select the desired item.
Then press the LEFT/ RIGHT buttons.
1
2
3
Use UP/ DOWN to select Parental. Press ENTER.
The Parental Control screen appears.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
Use LEFT/ RIGHT to select Yes if you want to use
a password. Press ENTER. The Enter Password
screen appears.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
Enter your password. The Re-enter Password
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
NOTE
4
• Be sure to select the correct Digital Output or no audio will be heard.
DTS
About the Rating Level ;
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
5
The Rating Level will work only when Use
Password is set to Yes. To unlock the player,
use LEFT/ RIGHT to select No. Use UP/ DOWN
to select Rating level. Press ENTER.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
- Use UP/ DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/ RIGHT to select No
in Use Password.
2X Scan Audio
1. Off : Turns 2X audio off.
e.g
About the Change Password ;
Setting up in LEVEL6.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
6
- Use UP/ DOWN to select Change Password. The Change
Password screen appears.
2. On : Turns 2X audio on.
- Enter your new password. Re-enter the new password
again.
NOTE
•
Press RETURN button.
How to make the SETUP MENU disappear or return to menu screen during set up;
NOTE
• Manufactured under license from Dolby Laboratories.
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 40
Co n tro llin g a TV w ith th e Re m o te
Se ttin g Up th e Disp la y O p tio n s
With the unit in Stop mode, press the SETUP button.
The remote can also be set up to control most TVs. To program the remote, use the code
that corresponds to your brand.
1
Use the UP/ DOWN buttons to select DISPLAY
2
3
OPTIONS. Then press the ENTER button.
Use the UP/ DOWN buttons to select the desired item.
Then press the LEFT/ RIGHT buttons.
TV Codes
CODE
BRAND
CODE
BRAND
TV Aspect
16
17
18
19
20
21
SAMSUNG_1
SHARP_2
SONY
SHARP_1
ZENITH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
LG_3
MAGNAVOX
SANYO_1
LG_2
DAEWOO_8
SANYO_2
EMERSON
SHARP_3
SAMSUNG_4
PANASONIC_2
NOBLEX
RCA
22
23
24
25
26
27
28
29
LG_1
TOSHIBA
HITACHI
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
JVC
TELEFUNKEN
NEWSAN
LOEWE
PANASONIC_1
MITSUBISHI_2
SAMSUNG_2
SAMSUNG_3
Still Mode
These options will help prevent picture shake in still mode and
display small text clearer.
1. Field : Select this feature when the screen shakes in the Auto
mode.
RCA2
2. Frame : Select this feature when you want to see small letters
more clearly in the Auto mode.
3. Auto : When selecting Auto, Field/ Frame mode will be
automatically converted.
Turn on the TV
If the TV turns off, setup is complete.
1
2
3
4
5
Screen Messages
Use to turn on-screen messages On or Off.
Enter other codes of the same brand
if the first code does not work.
Point the DVD’s remote at the TV.
Front Display
To operate the TV, use the “TV Function
Buttons” described on page 13.
Adjust the brightness of the unit’s front panel display.
1. Bright : Makes the Front Panel Display bright.
2. Dim : Makes the Front Panel Display dim.
3. Auto Dim : Makes the Front Panel Display dim automatically
when playing a DVD.
While holding the TV POWER button
down, enter the code for your brand.
e.g
NOTE
For Samsung _1 TVs
Black Level
Adjusts the brightness of the screen.(On/ Off)
•
The remote may not be able to control
every model TV of the brands listed.
While holding down the TV button, enter 0 and
then 1.
NOTE
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press the RETURN button.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 42
Sp e cifica tio n s
Tro u b le sh o o tin g
Before requesting service (troubleshooting), please check the following.
Power Requirements
Power Consumption
Weight
AC 120 V, 60 Hz
15 W
Action
Problem
Page
15.4 lbs
General
Dimensions
•
•
•
Check the batteries in the remote. May need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
W 16.9 in x D 15.9 in x H 3.5 in
+41°F to +95°F
No operations can be
performed with remote.
Operating Temperature Range
Operating Humidity Range
P6
10 % to 75 %
Reading Speed : 11.45 ft/ sec.
Approx. Play Time
DVD
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
Disc does not play.
(DIGITAL VERSATILE DISC)
P9
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/ sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/ sec.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/ sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/ L), R(2/ R)
•
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
CD : 5"
(COMPACT DISC)
CD : 31/ 2"
5.1 channel sound is not
being reproduced.
P14
Disc
•
(COMPACT DISC)
VCD : 5"
•
•
Check if your audio system is connected and working properly.
In a SETUP Menu, is the Audio Output set to Bitstream?
•
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Composite Video
Component Video
The
icon appears on
P17
screen.
Video
Output
S-VIDEO
•
•
Check if the disc has a Menu.
Disc Menu doesn’t appear.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
Play mode differs from the
Setup Menu selection.
2 Channel
P35~40
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
*Frequency Response
The screen ratio cannot be
changed.
•
•
The Screen Ratio is fixed on your DVDs.
Audio
P40
P39
*S/ N Ratio
*Dynamic Range
Output
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
100 dB
*Total Harmonic Distortion
0.004 %
•
Press power on from a cold start with no disc in the unit. Press the STOP
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
Forgot password
*: Nominal specification
P38
• Samsung Electronics Co., Ltd. reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
If you experience other
problems.
•
•
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-C621 7/19/02 10:45 AM Page 44
Wa rra n ty
Me m o
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts and Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must
be performed by SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale
must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center.
Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if
found to be defective during the limited warranty period specified above. The product must be returned during the
warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any
product for warranty service, the purchaser must contact SAMSUNG for problem determination and service
procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts
and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which
occurs in shipment; applications and uses for which this product was not intended; failures or problems which are
caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire,
water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by
improper or faulty installation; improper connection with any peripheral; product alteration or modification; improper
or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow
operating instructions, customer adjustments, maintenance and environmental instructions that are covered and
prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment
which damage this product or result in service problems; failures or problems due to incompatibility with other
equipment.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
|