Renesas Computer Hardware M30262T PTC User Guide

M30262T-PTC  
Converter Board for M30262  
User’s Manual  
Keep safety first in your circuit designs!  
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.2.00  
January 16, 2005  
REJ10J077-0200  
( 1/4 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Hardware Configuration of the M30262T-PTC (See Figure 3)  
Hardware configuration of the M30262T-PTC is shown below.  
(1) Connector  
Connector for the emulator for M16C/62P (M3062PT-EPB).  
(2) Cable  
Flat cable which connects the user system flexibly (Length: 150 mm).  
(3) Target interface  
Interface which has a connector for a user system and jumper switch JP1.  
Jumper switch JP1  
M16C/62P TOOL SIDE  
40b  
40a  
40b  
40a  
JP1  
J1  
J2  
IC1  
1
1b  
1a  
1b  
1a  
M30262T-PTC REV.A  
M30262T-PTCB REV.A  
Connector  
Cable (FFC cable : 150 mm)  
Target interface  
Figure 3 Hardware configuration of the M30262T-PTC  
Emulator for 16C/62P  
( PC7501 + M3062PT-EPB )  
( PC4701 + M3062PT3-RPD-E )  
6. Connection Procedure (see Figure 4)  
The procedure for connecting the M30262T-PTC is shown below.  
(1) Mount the NQPACK048SD.  
PC7501  
(2) Mount the YQPACK048SD on the NQPACK048SD.  
(3) Secure the four corners of the YQPACK048SD with  
the YQ-GUIDE's.  
M3062PT-EPB  
M3062PT3-RPD-E  
Do NOT use the screws in the YQPACK048SD package.  
Do NOT use the screwdriver in the NQPACK048SD  
package for securing YQ-GUIDE's (used for securing  
HQPACK048SD).  
(5)  
(4) Attach the M30262T-PTC to the YQPACK048SD.  
(5) Connect the emulator for M16C/62P to the M30262T-PTC.  
(4)  
Use a flat-blade  
screwdriver.  
7. Switch Settings  
YQ-GUIDE’s  
(x4)  
When you use No. 36 pin (Port P15/INT3/ADTRG),  
set switch JP1 according to port functions.  
(3)  
M30262T-PTCB  
YQPACK048SD  
NQPACK048SD  
(2)  
(1)  
For ADTRG  
For P15 or INT3  
JP1  
JP1  
48-pin 0.5-mm-pitch  
(48P6Q-A) foot pattern  
Figure 5 JP1 Settings  
Figure 4 Connection Procedure  
( 3/4 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. External Dimensions of the M30262T-PTC (Connector) and a Sample Foot Pattern (see Figure 6)  
10.0  
6.5  
30.0  
JP1  
0.5  
0.25  
IC1  
1
M30262T-PTC REV.A  
Unit: mm  
Figure 6 External dimensions of M30262T-PTC and sample foot pattern  
9. Precautions  
CAUTION  
Cautions for Debugging M16C/262 with an Emulator for M16C/62P:  
The cautions for software development of M16C/26 using the emulator for M16C/62P (M3062PT-EPB or  
M3062PT3-RPD-E) are as follows.  
(1) NMI*  
M16C/26: NMI* is disabled after reset. Set the P85/NMI* function select bit (bit 4 of address 001E16) to "1" to  
use the NMI* interrupt.  
M16C/62P:NMI* is enabled after reset.  
(2) Port P85  
M16C/26: Port P85 has direction and pull-up control registers.  
M16C/62P: Port P85 functions only as an input port. Thus, debugging of port P85 output and pull-up functions  
cannot be performed with the M16C/62P tool.  
(3) Flash memory suspend mod  
M16C/62P flash memory does not support the M16C/26 suspension mode. Thus, debugging of the suspension  
function cannot be performed with the M16C/62P tool.  
When starting up a debugger (M3T-PD30F or M3T-PD30), select the following MCU file according to the emulator  
for M16C/62P.  
(1) When you start up the M3T-PD30F using the PC7501 + M3062PT-EPB, select “M16C62P.mcu”.  
(2) When you start up the M3T-PD30 using the PC4701 + M3062PT3-RPD-E, select “M3062PT3.mcu”.  
IMPORTANT  
Notes on This Product:  
When connecting the M30262T-PTC, be sure to use the included YQ-GUIDE's  
Do not use the screws included with the YQPACK048SD for connecting the YQPACK048SD  
We cannot accept any request for repair.  
For purchasing the NQPACK048SD, YQPACK048SD and HQPACK048SD, contact the following:  
For inquiries about the product or the contents of this manual, contact your local distributor.  
( 4/4 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio TV Mount PSWLE59 User Guide
Riccar Vacuum Cleaner RC 1100 User Guide
Roland Electronic Keyboard HPi 6s User Guide
Roland Guitar GR 100 User Guide
Rosewill Security Camera RSV L4500 User Guide
Ryobi Cordless Saw RJC181 User Guide
Samsung Computer Monitor 1100DF User Guide
Samsung Security Camera SCC 643AP User Guide
Samsung Vacuum Cleaner SC88P User Guide
Sears Saw 2043699969 User Guide