MAIN Outlet: Plug in your main component (usually a
Package contents
Communication connections
Typical Power Connections
TM
TV or computer).
Networking IN/OUT: Using an Ethernet cable (not
supplied), connect your Ethernet jack to Networking
IN and connect Networking OUT to your computer.
SWITCHED Outlets: Plug in components that are only
used when the main component is turned on. To save
power, these will turn off automatically when the main
component is turned off or goes into sleep/standby mode.
ALWAYS ON Outlets: Plug in components that are
used even when the main component is turned off.
Surge Protector
User’s Guide
Quick Start
GROUNDEDWHEN LIT
ALWAYS ON
MAIN SWITCHED
THE PERFORMANCE YOU NEED
Features
Phone IN/OUT: Using modular telephone cords (not
supplied), connect your telephone wall jack to Phone
IN and connect Phone OUT to your fax, modem, or
telephone.
Home Office
HomeTheater
PROTECTEDWHEN LIT
Many home theater and home office components
Energy-Saving Surge Protector
continue to use (waste) electricity even when “off”
or in “standby” mode. Plug these devices into the
SWITCHED outlets and they will automatically turn off
when the main component is turned off.
Coax IN/OUT: Using coaxial cables (not supplied),
connect yourTV input (antenna, satellite, or cable) to
Coax IN and connect Coax OUT to yourTV.
Typical Power Connections:
HomeTheater
DVR
Router or modem
SWITCHED
HomeTheater Home Office
Please read this user’s guide before using your new surge
protector.
Home Office
Guards your valuable equipment from sudden
electrical spikes and surges.
Filters electromagnetic and radio-frequency
interference.
Indicators alerts you when the AC line is no longer
protected after a power surge or spike.
MAIN
TV or Receiver
Computer
User’s Guide
61-189
Satellite or
VCR, DVD player,
gaming system,
powered speakers
Printer, scanner,
monitor, amplified
speakers
cable receiver
Networking
SWITCHED
Phone OUT
OUT
VOIP phone
Router, modem,
VOIP phone, shared
wireless printer
VCR or DVD player
Gaming system
ALWAYS
ON
DVR, satellite or
cable receiver,
Scanner
Printer
1
4
7
2
5
8
0
3
6
9
#
1 Plug into wall outlet
*
1. Switch RESET/OFF to OFF.
RESET/OFF
Safety Cover
MAIN
Home Office
ꢀ. Plug the Surge Protector into a
3 Turn on
three-prong standard wall outlet.
HomeTheater
Switch RESET/OFF to RESET to turn on the surge protector.
w
Caution: Do not plug this surge
GROUNDEDWHEN LIT: Lights when connection to
the wall outlet is properly grounded.
PROTECTEDWHEN LIT: Lights when the connected
devices are protected.
MAIN SWITCHED: Lights when the device plugged
into the MAIN outlet is turned on.
protector into a non-grounded outlet.
Doing so invalidates your Equipment
Guarantee and puts your equipment at risk.
Networking
IN
Phone IN
2 Connect equipment
Slide the Safety Covers aside and make the
following connections:
w
Caution: If PROTECTEDWHEN LIT or GROUNDED
Powered speaker
Monitor
TV or receiver
Computer
WHEN LIT do not light, stop using the surge protector.
Coax IN
Coax OUT
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢃ
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
|