DVD Recorder/VCR
Combo
User’s Guide
Important Disc Information
This Product Can Record on the Following
DiscTypes:
DVD+R (2.4x, 4x, 8x, and 16x)
DVD+RW (2.4x and 4x)
This recorder cannot record on DVD-R or DVD-RW
discs. Please make sure to purchase discs with the plus “+”
symbol on the package.
Changing Entertainment. Again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Audio Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Camera Angle Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Play Mode Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
IntroScan (Audio CD only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
PlayBack Control (PBC),Video CD only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Playing mp3 and/or JPEG files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Chapter 1: Connections and Setup
Types of Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Things to consider before you connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Unpack the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Choose your connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Explanation of Jacks and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Back of the DVD/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Front of the DVD/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Connection: DVD/VCR +TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connection: DVD/VCR +TV + Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connection: DVD/VCR +TV + Satellite Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Advanced Audio Connection Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Install batteries in the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Turn on theTV and the DVD/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Complete Interactive Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
What to Expect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
How to find yourTV’sVideo Input Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Next Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Chapter 5:The Menu System
Overview of the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
The Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
WatchTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Play Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
DiscTitle Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Copy Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Disc Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Rename Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Erase Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Lock Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Finalize Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Make Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
PlayTape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Play from Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
CopyTape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Review A-B Edits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Delete A-B Edits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Disc Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Lock/Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Rating Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
UnratedTitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Digital Audio Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
QXpander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Audio Broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Recording Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Default Rec Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Tape Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Chapter Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Smart Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Disc Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Tape Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Interactive Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
DV-CAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Chapter 2:The Remote Control
Explanation of buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Find out if the remote can operate yourTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Programming the remote to operate yourTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Programming the remote to operate other components . . . . . . . . . . . . . . . . . . . . . . .23
Using the remote’s features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Remote code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Chapter 3: Using the Recorder’s Features
WatchingTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
The Channel Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
DVD Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Express recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Watching one channel while you record another channel . . . . . . . . . . . . . . . . . . .31
Watching a videocassette tape while you record to disc . . . . . . . . . . . . . . . . . . . .31
Timer Recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Disc Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Finding a title (movie, program, etc.) by using the Sort Feature . . . . . . . . . . . . . .33
Erasing the disc library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
DVD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Editing DVD+R and DVD+RW discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Editing tiles using the Hide Chapter Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
VCR Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
AdvancedVCR Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Advanced Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
VCR Info Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
VCR Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Express Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Watching one channel while you record another channel . . . . . . . . . . . . . . . . . . .39
Recording to tape while you watch a DVD disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Timer recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Copying a videocassette tape to a DVD disc (DVD+R or DVD+RW) . . . . . . . . . . .40
Copying a DVD disc (DVD+R or DVD+RW) to tape . . . . . . . . . . . . . . . . . . . . . . . .40
Copying a digital video camcorder tape to a DVD disc . . . . . . . . . . . . . . . . . . . . . .41
Chapter 4: Playing Discs
Regional Coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Types of discs you can play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
How to Load and Play Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Using Different Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Search Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Using the On-screen Info Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Selecting aTitle on DVDs or aTrack on Audio CDs orVCDs . . . . . . . . . . . . . . . . .46
Chapter Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Subtitle Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Repeat Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Chapter 6: Additional Information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
LimitedWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
Types of Discs
DVD+Rewritable
DVD+R
DISCSYOU CAN USE FOR RECORDING
DVD+R 2.4x, 4x, or 8x, and 16x ONLY;
DVD+RW 2.4x and 4x ONLY.
IMPORTANT NOTES:
This recorder is not compatible with DVD-R or DVD-RW discs for recording. Please make sure to purchase discs with
the plus “+” symbol on the package. Also, it is NOT possible to record on CD-R or CD-RW discs.
IMPORTANT: It is NOT possible to record content that is copy-protected.This is usually true for most pre-recorded
DVD discs and most pre-recorded VHS tapes.
TYPES OF DISCSYOU CAN PLAY
•
•
•
DVD discs – DVD movie discs (DVD-ROM); DVD+R; DVD+RW; DVD-RW (must be recorded using video mode orVM); DVD-R
(must be recorded using video mode orVM and must be finalized).
CDs (Audio CDs, CD-R, CD-RW) – Audio CDs contain musical or sound content only. mp3 discs are CDs (CD-R or CD-RW)
that contain mp3 files.This product also plays CDs that contain JPEG files and Multisession CDs.
Some discs may not be compatible
due to laser pickup and disc design.
Video CD (VCD) – Like DVD video discs,VCDs contain picture and sound content.The difference is the amount of information
that can be stored on the disc.VCDs typically have lower picture and sound quality than DVD discs.You must use DVD+R or
DVD+RW discs to record on your DVD/VCR notVCDs.
Things to consider before you connect
Protect components from overheating
•
•
•
•
Don’t block ventilation holes on any of the components or the fan on the back of this product.Arrange the components so that air can circulate freely.
Don’t stack components.
When you place components in a stand, make sure you allow adequate ventilation.
If you connect an audio receiver or amplifier, place it on the top shelf.
Position cables properly to avoid audio interference
•
Insert each cable firmly into the designated jack.
•
If you place components above theTV, route all cables down the side of the back of theTV instead of straight down the middle of the back of theTV.
Connection Pictures
Audio/video cables are usually bundled together. For better visibility, the connection pictures in this book show each cable separately (audio left, audio right, and video).
Graphics contained within this publication are for representation only.
ON-OFF
Unpack the Box
TV
DVD/VCR CABLE
SAT
AUX
AUDIO
Your DVD/VCR came with the following items:
ZOOM EDIT
OPEN ANGLE
CLOSE
TIMER•GUIDE INFO
MENU
CLEAR
OK
AGAIN
ADVANCE
LIVE
VOL
CH
MUTE
1
GO
BACK
2
3
6
9
4
5
8
DVD
/
VCR
/
VIDEO CD
/
CD / MP3 PLAYER DIGITAL VIDEO DISC RECORDER DRC 8300
7
COPY
INPUT
0
ANTENNA
REVERSE PLAY FORWARD
STANDBY/ON
RECORD
STOP/EJECT
REV
FWD
PLAY/PAUSE
INPUT
CH-/SKIP-
CH+/SKIP+
OPEN/CLOSE
RECORD
STOP
REV
FWD
PLAY/PAUSE
RECORD
STOP
PAUSE
S-VIDEO
VIDEO
L
AUDIO
R
DVD/VCR
Remote control and
batteries (part number
261387)
1 set of audio video cables (part number 233086)
1 DVD+RW Blank Disc
S-Video cable (part number 257982)
(supplied with model DRC8312 only)
RF Coaxial cable (part
number 221396)
Power cord (part number 218104)
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Chapter 1: Connections and Setup
Choose Your Connection
There are several ways to connect your DVD/VCR. Please use the following chart to determine which connection is best for you.Turn to the appropriate page for specific
instructions.
Components
Cables Needed
Connection
Go to
• Coaxial
• Audio/video
• S-Video
TV
page 8
DVD/VCR
DVD/VCR
DVD/VCR
DVD/VCR
TV
TV
• Coaxial
• Audio/video
• S-Video
TV + cable
box
page 10
page 12
Cable Box
• Coaxial
• Audio/video
• S-Video
TV +
satellite
receiver
Satellite Receiver
Cable Box
TV
TV
• Coaxial
• Audio/video
• S-Video
TV + cable
box + audio
receiver
page 14
• Digital Audio
Audio Receiver
To achieve enhanced picture quality, use an S-Video
cable to connect your DVD/VCR to yourTV
if yourTV has an S-Video jack available (cable
supplied with model DRC8312 only).
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Chapter 1: Connections and Setup
Explanation of Input Jacks and Cables
This section describes the jacks and cables you can use to make connections. Some cables are supplied with your product or you can purchase other cables by calling
1-800-338-0376, order online at www.rca.com, or go to your local electronics store).There are several ways to connect your DVD/VCR to yourTV depending upon the
cables you have and the jacks that are on the back of yourTV.
Different jacks and cables provide a different level of performance. It’s important to remember, we’re talking about degrees of picture improvement for comparison. If your
TV has Component jacks (Y, Pb, Pr), S-VIDEO, and composite video (often color-coded yellow); Component (Y, Pb, Pr), would be considered excellent, S-Video would be very
good, and the composite video jack (yellow) would be considered good.
ComponentVideo (Y, Pb, Pr) Jacks and Cables
TheY, Pb, Pr jacks provide optimum picture quality because the video is separated into three signals
Y
(two signals are dedicated to the color portion of the image, and the other signal is dedicated to the
black and white part of the image).
To ensure maximum picture quality, use three video-grade cables (not supplied) for the connection.
You can purchase bundled component video cables that are color-coded to match theY, Pb, Pr jacks
(red, green, and blue). ComponentVideo Input jacks are usually found on high-endTVs, such as
HDTVs; multimedia monitors; and some of the “flat” LCD and PlasmaTVs or monitors.
Pb
Pr
Notes:
Also, remember to connect the left and right audio cables because the Y, Pb, Pr jacks and cables
carry only the picture signal, not the sound.
Use the Component Video connection (Y, Pb, Pr) for DVD playback and watching TV.You must
also connect yellow video cable or S-Video for VCR playback.
S-Video Jacks and Cables
The S-Video (separate video) jack provides better picture quality than a composite video jack
(sometimes labeledVIDEO and color-coded yellow onTVs) because S-Video keeps the color part
of the picture separate from the black and white part of the picture. If yourTV has an S-VIDEO jack,
connect the DVD/VCR to theTV with an S-Video cable for a better quality picture.
S-VIDEO
One S-Video cable is supplied with your DVD/VCR (for model DRC8312 only).
Note: Remember to connect the left and right audio cables because the S-Video cable carries
only the picture signal, not the sound.
Audio/Video Jacks and Cables (RCA-type)
Video
The basicVideo jack (usually color-coded yellow) is also referred to as composite video. Composite
video doesn’t keep color information separated (like S-Video), but it’s better than the video quality
you get from an RF coaxial cable (the type used to connect a cable signal or off-air antenna).
INPUT
VIDEO
Audio
L
These jacks are used to send the audio from the disc or tape you’re playing in the DVD/VCR to the
TV.The audio jacks and cables (supplied) are often color-coded (red for right audio, and white for
left audio).You must connect audio cables to the AUDIO L and R jacks on the DVD/VCR and the
corresponding Audio Input Jacks on theTV no matter whichVideo jack you connect (VIDEO;
S-VIDEO;Y, Pb, Pr).
AUDIO
R
Note: If your TV has only one input for audio (mono), connect it to the left (white) audio jack
on the DVD/VCR and don’t connect the right (red) audio part of the cable.
DIGITAL
AUDIO OUT
Digital Audio Output
Use a digital optical cable (or SPDIF cable- not supplied) to connect your DVD/VCR to a compatible
Dolby Digital or PCM receiver or decoder. Dolby Digital offers theatre-quality sound (six audio
channels). If you own a receiver that uses an optical cable input, you can use an optical cable to
connect the DVD/VCR to that receiver for the best sound quality. Go to the Digital Audio Out
screen in the System Options menu to select Dolby Digital or DTS as the output for this jack.
Note:This DVD/VCR’s optical digital output jack fully complies with the international standard
governing this type of jack (IEC958), and is designed for connection to a Dolby Digital (AC-
3® or PCM) receiver or decoder. Older equipment, some of which is not fully compliant with
IEC958, may not be compatible with the Dolby Digital bitstream. Such a connection using
anything other than a Dolby Digital (AC-3 or PCM) receiver or decoder could create a high noise
level, causing damage to headphones or speakers.
OPTICAL
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Chapter 1: Connections and Setup
CABLE/ANTENNA
DVD Playback Only
DVD/VCR
S-VIDEO
COMPONENT
DIGITAL
OUTPUT
VIDEO
INPUT
VIDEO OUTPUT
AUDIO OUT
Y
VIDEO
INPUT
IN
Pb
CABLE/ANTENNA
L
L
AUDIO
AUDIO
Pr
OUT
PROG.
SCAN
OUTPUT
R
R
OPTICAL
ON
OFF
AC-IN
CH4
CH3
Back of the DVD/VCR
The back of your recorder might look a little overwhelming at first.This section explains what goes where and why.There are two sets of jacks on the back of your DVD/
VCR—INPUT jacks and OUTPUT jacks.
Each jack is explained individually below, but the basic idea is about sending and receiving information to be played on or through your DVD/VCR and displaying that
information on yourTV screen.
INPUT The cables connected to the INPUT jacks bring pictures and sound INTO the DVD/VCR, such as the cable signal (programming) from the cable company or
satellite programming from a satellite receiver.
OUTPUT The cables connected to the OUTPUT jacks are sending pictures and sound from the DVD/VCR OUTTO yourTV so you can see it on the screen.The correct
cables must be connected to the DVD/VCR’s Output jacks and the corresponding Input Jacks on theTV so you can see the program on theTV.You must also tune theTV to
the correct channel, called aVideo Input Channel (for details, go to page 19).
Explanation of Jacks (from left to right)
CH3/Ch4 Switch This switch is also found onVCRs—it corresponds to theTV channel you would use to watch a tape or disc if you only have yourTV connected to the
DVD/VCR with an RF coaxial cable via the CABLE/ANTENNA OUTPUT jack (if the switch is set to CH3, you would tune theTV to channel 3). However, the connections
illustrated in the User’s Guide show a preferred connection using audio/video cables or an S-Video cable.
CABLE/ANTENNA INPUT: Connect an RF coaxial cable from an off-air antenna, cable box, or cable outlet to this jack.The cable is sending the programming from the
source to the DVD/VCR.
CABLE/ANTENNA OUTPUT: Connect an RF coaxial cable (provided) to this jack and to the Cable/Antenna Input jack on yourTV. It is important to connect this cable
so that yourTV receives programming even when the DVD/VCR is turned off.
INPUT:These jacks receive audio and video from a compatible component, such as a satellite receiver.Another set of Input Jacks (INPUT 2) are on the front of the DVD/
VCR for temporarily connecting components such as a camcorder or a video game unit.
VIDEO: Color coded yellow, the video cable you use with this jack provides better quality than an RF coaxial cable but isn’t as good as S-Video. Connect
corresponding video cable to the output jack of a compatible component, such as a satellite receiver or cable box.
AUDIO L (left): Color coded white, connect corresponding audio cable to the output jack of a compatible component, such as a satellite receiver or cable box.
AUDIO R (right): Color coded red, connect corresponding audio cable to the output jack of a compatible component, such as a satellite receiver or cable box.
S-VIDEO
IN: If your satellite receiver or cable box has an S-VIDEO output jack, connect the S-Video cable to this jack because it provides better picture quality than standard
video (the yellow jack).
OUT: If yourTV has an S-Video jack, connect an S-Video cable to theTV’s S-VIDEO jack and to this S-VIDEO OUT jack on the DVD/VCR to achieve better picture
quality than standard video (the yellow jack).
continues on next page…
Graphics contained within this publication are for representation only.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
CABLE/ANTENNA
DVD Playback Only
DVD/VCR
COMPONENT
DIGITAL
OUTPUT
INPUT
S-VIDEO
VIDEO OUTPUT
Y
VIDEO
AUDIO OUT
VIDEO
INPUT
IN
Pb
Pr
CABLE/ANTENNA
L
L
AUDIO
AUDIO
OUT
PROG.
SCAN
OUTPUT
R
R
OPTICAL
ON
OFF
AC-IN
CH4
CH3
OUTPUT:These jacks send the content (audio and video) from your DVD/VCR OUT to theTV so you can see it on theTV screen and hear it through theTV’s speakers.
VIDEO: Color coded yellow, the video cable you use with this jack provides better quality than an RF coaxial cable but isn’t as good as S-Video.
AUDIO L (left): Color coded white, connect corresponding audio cable toTV’s Audio Left Input jack.
AUDIO R (right): Color coded red, connect corresponding audio cable toTV’s Audio Right Input jack.
COMPONENTVIDEO OUTPUT (Y, Pb, Pr) - DVD PLAYBACK ONLY: Some high-endTVs and monitors have ComponentVideo Input jacks.The cables that send
the video signal through these Output Jacks provide the highest resolution because the video signal is divided into 3 separate parts (cables not supplied with DVD/VCR).As
withVIDEO and S-VIDEO, COMPONENTVIDEO (Y, Pb, Pr) only carries the picture signal so you need to connect the audio cables so you’ll hear the sound. If yourTV has
COMPONENT INPUT jacks, use three video grade cables to connect the DVD/VCR to these jacks on theTV to get the best picture quality. However, make sure you also
connect another video cable (either a RF coaxial cable to the CABLE/ANTENNA OUTPUT jack; the yellow cable to theVIDEO Output jack; or an S-Video cable to the
S-VIDEO OUT jack) because you can only use ComponentVideo for DVD Playback.You’ll need to have anotherVideo Output connected for playback ofVCR tapes.
DIGITAL AUDIO OPTICAL OUT - DVD PLAYBACK ONLY: If you have a Dolby Digital or DTS receiver or decoder
with a Digital Audio Optical Input jack, you can achieve enhanced sound quality during DVD playback by connecting a
digital optical cable (not supplied).
Note: Make sure you connect regular audio cables in addition to connecting a Digital Audio cable if you want to play a VCR tape while recording on a DVD at the
same time.The VCR tape playback will use the standard audio cables and not the digital optical output jack.
PROG. SCAN switch – If you’ve connected your DVD/VCR to aTV that uses progressive scanning to display the image via theY, Pb, Pr jacks, turn the switch to the “on”
position for progressive scan playback of DVD discs.Typically, only some High DefinitionTelevisions and high-end multimedia monitors use progressive scanning. Leave the
switch in the OFF position for S-VIDEO or regularVIDEO (yellow) connections.
Note: If you turn the PROG SCAN switch on, and your TV isn’t capable of progressive scanning you won’t see a clear picture on the TV screen. Additionally, when
playing DVDs you won’t see any picture—press STOP (the main menu appears) and turn the PROG SCAN switch to the OFF position.Try playing the disc again.
AC-IN –This is where you attach the power cord.
Graphics contained within this publication are for representation only.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
DVD / VCR / VIDEO CD / CD / MP3 PLAYER DIGITAL VIDEO DISC RECORDER DRC 8300
COPY
STANDBY/ON
RECORD
STOP/EJECT
REV
FWD
PLAY/PAUSE
INPUT
CH-/SKIP-
CH+/SKIP+
OPEN/CLOSE
RECORD
STOP
REV
FWD
PLAY/PAUSE
S-VIDEO
DV IN
L
AUDIO
R
VIDEO
VCR buttons
DVD buttons
Front of the DVD/VCR
COPY – Shortcut to transfer tapes (VCR) to disc (DVD), which is great for converting your camcorder recordings that are on videocassette tape to a DVD disc.When
you have a recordable DVD+R or DVD+RW disc in the DVD disc tray and a videocassette tape in theVCR, press COPY (theVCR starts playing and the DVD/VCR starts
recording automatically).
STANDBY/ON –Turns the DVD/VCR on and off.
VCR Buttons
RECORD – Records to a videocassette tape.
STOP/EJECT –When playing a tape, stops playback.When tape isn’t playing, ejects the tape.
REV – Rewinds the tape
FWD – Fast forwards the tape
PLAY/PAUSE – Starts playback. During playback, pauses playback.
INPUT – Just like aTV hasVideo Input Channels (page 19), the DVD/VCR has oneVideo Input Channel for each set of INPUT jacks.TheVideo Input Channel is the
“channel” to which you tune the DVD/VCR so you can see the picture and hear the sound that’s coming from the component that is connected to the DVD/VCR’s INPUT
jacks. For example, if you connected your camcorder to the Audio andVideo Input jacks on the front of the DVD/VCR, you would press the INPUT button until INPUT 2-
Front appears.
DVD Buttons
CH-/SKIP- (channel down/skip reverse) – Goes to the previous channel in the channel list when you’re watchingTV.When playing a disc, goes to the beginning
of the current chapter or track unless you’re within the first minute of a chapter or the first 15 seconds of a track—then, you’ll skip to the beginning of the preceding
chapter or track.
CH+/SKIP+ (channel up/skip forward) – Goes to the next channel in the channel list when you’re watchingTV.When playing a disc, goes to the beginning of the
next title, chapter, or track on a disc (in effect,“skipping” the title, chapter, or track).
OPEN/CLOSE – Opens and closes the disc tray.
RECORD – Records content to a DVD disc (DVD+R or DVD+RW discs only).
STOP – Stops playback and/or recording.
REV (reverse) – Searches backwards through the disc.
FWD (forward) – Searches forwards through a disc.
PLAY/PAUSE – Starts playback of a disc. Pauses recording or playback.
Front Input Jacks:
INPUT 2: Audio/Video jacks –These Input jacks are provided for convenience when you’re connecting a temporary component, such as a camcorder.
S-VIDEO – If a component you’re connecting, such as a camcorder, has an S-Video Output jack connect it to this jack for picture quality that is better than regular
video (yellow). Remember, you still have to connect audio cables to hear sound.
DV IN – This jack is provided when you’re connecting a DV camcorder through a IEEE 1394 Firewire connection.
Graphics contained within this publication are for representation only.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
DVD/VCR +TV
In from cable
or antenna
CABLE/ANTENNA
DVD Playback Only
DVD/VCR
COMPONENT
DIGITAL
OUTPUT
INPUT
S-VIDEO
VIDEO OUTPUT
VIDEO
VIDEO
AUDIO OUT
Y
INPUT
IN
Pb
Pr
CABLE/ANTENNA
L
L
1
AUDIO
AUDIO
OUT
PROG.
SCAN
OUTPUT
R
R
OPTICAL
ON
OFF
DVD/VCR
AC-IN
CH4
CH3
4
2
3a
3b
3c
3
VIDEO
L
S-VIDEO
R
INPUT1
INPUT2
S-VIDEO
CABLE/ANTENNA
TV
The back of yourTV might look
different than the one pictured here.
Details about the different kinds of cables used to connect your DVD/VCR are on page 4.
To watch one program while you
record another:
Tune theTV to its Input 1 channel orVid 1 channel
Tune the DVD/VCR to the channel you want to record, and press RECORD.
Use the buttons on theTV (or theTV’s remote control*) to tune theTV to the channel you want to
watch. For example, change the channel on theTV to channel 8 to watch a program on channel 8.
To play a disc or tape:
Tune theTV to its Input 1 channel orVid 1 channel.
If you need help finding your TV’s various Video Input Channels, go to page 19.
* The remote control packed with your DVD/VCR is capable of being programmed to operate many brands and models of TVs and VCRs. For
instructions, go to page 22. If the remote operates your TV, press TV and INPUT to access the Video Input Channel.
Graphics contained within this publication are for representation only.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
Connection: DVD/VCR +TV
1. Connect the signal (cable or antenna):
Note: Depending upon how you currently have your TV connected, you’ll have to disconnect the cable from your
TV’s Antenna Input jack (sometimes labeled CABLE/ANTENNA) or your VCR’s Input jack before you connect the
cable as explained below.
Cable service: If you have cable service via a cable that comes out of the wall, connect the end of that cable to the
CABLE/ANTENNA INPUT jack on the DVD/VCR.
RF Coaxial cable
Note: If you have a cable box, go to page 10 for connection instructions.
Off-air antenna: If you use an off-air antenna to getTV programming, connect the antenna’s RF coaxial cable to the
CABLE/ANTENNA INPUT jack on the DVD/VCR.
2. Connect the DVD/VCR to theTV
You need to connect cables from the DVD/VCR’s OUTPUT jacks to theTV’s INPUT jacks in order to see the content
from the DVD/VCR.
White
Use the RF Coaxial cable that was packed with your DVD/VCR, and connect one end to the CABLE/ANTENNA
OUTPUT jack on the DVD/VCR. Connect the other end to the Cable/Antenna Input jack on the back of yourTV
(sometimes labeled CABLE/ANTENNA). It is important to make this connection so you can watch cable or antenna
programs when the DVD/VCR is off.
3. If you want to be able to record oneTV program while you watch a different program, you need to connect the
audio/video cables in addition to connecting the RF Coaxial cable described in
Step 2.
Audio video cables are usually color-
coded red, white, and yellow.
3a. Connect the audio cables.
A set of audio/video cables was packed with your DVD/VCR. Connect the audio cables to
the OUTPUT AUDIO L (left – white) and R (right – red) jacks on the back of your DVD/VCR, and to the
corresponding Audio Input jacks on yourTV (sometimes labeled AUDIO IN L and R).
3b. Connect the video cable.The cables you use for the video determine the quality of the picture you’ll see on
yourTV when you’re playing DVDs. For more information about cables and signal quality, go to page 4. Connect
the video cable (yellow) to the OUTPUTVIDEO jack on the back of your DVD/VCR, and to theVideo Input
jack on yourTV (sometimes labeledVIDEO IN).
If yourTV has an S-Video jack,
connect the S-Video cable
(supplied). S-Video provides
better video quality than
3c. If yourTV has an S-Video jack, use the S-Video cable (supplied with model DRC8312 only). Connect one end of
the S-Video cable to the S-VIDEO IN jack on the back of theTV and the other end to the S-VIDEO OUT jack
on the back of the DVD/VCR.
composite video (the yellow jack).
3d. COMPONENT OUT Y, Pb, Pr (not shown) If yourTV has Component Input Jacks (Y, Pb, Pr), you can
achieve even greater picture quality (DVD playback only) by connecting the DVD/VCR to theTV using these
jacks (COMPONENTVIDEO OUTPUT,Y, Pb, Pr on the DVD/VCR). For more explanation, go to page 4.
ComponentVideo cables not supplied with the DVD/VCR.
Notes:
If your TV is capable of progressive scan, connect the DVD/VCR to the TV using the COMPONENT VIDEO OUTPUT
jacks, and slide the PROG SCAN switch to the ON position to see DVD titles (movies) in progressive scan format. If
you need more explanation, go to page 6.
If you use the COMPONENT VIDEO connection (Y, Pb, Pr), you must connect another video cable (yellow or
S-Video) for VCR playback.The Component Out jacks are only for DVD playback.
4. Attach the AC power cord to the unit.
5. Insert the other end of the AC power cord into an AC outlet (or power strip).
Go to page 16
Graphics contained within this publication are for representation only.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
DVD/VCR +TV+ Basic Cable Box
The back of yourTV
and/or Cable Box might
look different than the
ones pictured here.
CABLE/ANTENNA
DVD Playback Only
DVD/VCR
COMPONENT
DIGITAL
OUTPUT
INPUT
S-VIDEO
VIDEO OUTPUT
AUDIO OUT
Y
VIDEO
VIDEO
INPUT
IN
Pb
CABLE/ANTENNA
L
L
1b
AUDIO
AUDIO
Pr
OUT
PROG.
SCAN
1a
OUTPUT
R
R
OPTICAL
ON
OFF
DVD/VCR
AC-IN
CH4
CH3
4
AUDIO
VIDEO
R
L
2b
2d
CABLE IN
CABLE OUT
2c
Cable Box
VIDEO
L
S-VIDEO
S-VIDEO
R
2a
INPUT1
INPUT2
CABLE/ANTENNA
TV
Notes about cable boxes:
The connection diagram shown above reflects a basic setup. Since there are many different cable companies and types of cables boxes, your cable box may
come with a different recommended connection diagram. Normally,ANALOG cable boxes are used so that the cable company can scramble the signal for
premium channel programming (like movie channels).The cable box will descramble the signal if you are a premium channel subscriber. In some cases, your
cable company may not scramble the signal for basic channels and the signal could be passed through the cable box so that you could receive the signal with the
DVD/VCR.
There are also DIGITAL cable boxes that are relatively new and are used with digital cable service. Even with digital cable service, analog signals are often
carried on the same cable.
Using the connection diagram above, you won’t be able to watch one program while recording another program.This may be possible with a more sophisticated
setup, using an optional signal splitter and A-B switch.We suggest you contact your cable company for help in recommending the best setup for your situation.
If you connect your components as described, you must access differentVideo Input Channels on yourTV to see programming. If you don’t know how to
accessVideo Input Channels on yourTV, go to page 19 for help.A general explanation, based on the connection shown above, follows:
To play a disc or tape:
Tune theTV to its Input 1 channel orVid 1 channel.
If you need help finding your TV’s various Video Input Channels, go to page 19.
* The remote control packed with your DVD/VCR is capable of being programmed to operate many brands and models of TVs. For instructions, go to page 22. If the
remote operates your TV, press TV and INPUT to access the Video Input Channel.
Graphics contained within this publication are for representation only.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
Connection: DVD/VCR +TV + Basic Cable Box
1. Connect the cable box signal.
Note: Before you connect the DVD/VCR, you’ll need to disconnect some of the cables first in order to reconnect
them.
1a. Connect the RF coaxial cable that is connected to the cable box’s Output jack (sometimes labeled CABLE
OUT) to the CABLE/ANTENNA INPUT jack on the back of the DVD/VCR.
RF Coaxial cable
1b. If your cable box has audio/video output jacks, connect the audio cables to the Audio Output L (left – white)
and R (right – red) jacks on the back of your cable box, and to the corresponding INPUT AUDIO jacks on your
DVD/VCR.Then connect the video cable (yellow) to theVideo Out jack on the back of your cable box, and to
the INPUTVIDEO jack on yourTV.
2. Connect the DVD/VCR to theTV
You need to connect cables from the DVD/VCR’s OUTPUT jacks to theTV’s INPUT jacks in order to see the
content from the DVD/VCR (whether it’s aTV program or a disc you’re playing).
White
2a. Use the RF coaxial cable that was packed with your DVD/VCR, and connect one end to the CABLE/ANTENNA
OUTPUT jack on the DVD/VCR. Connect the other end to the Cable/Antenna Input jack on the back of your
TV (sometimes labeled CABLE/ANTENNA). It is important to make this connection so you can watch cable
box programs when the DVD/VCR is off.
Audio video cables are usually
color-coded red, white, and yellow.
Red= right audio;White = left
audio;Yellow = video.
2b. Connect the audio cables.
A set of audio/video cables was packed with your DVD/VCR. Connect the audio cables to the OUTPUT
AUDIO L (left – white) and R (right – red) jacks on the back of your DVD/VCR, and to the corresponding
Audio Input jacks on yourTV (sometimes labeled AUDIO IN L and R).
2c. Connect the video cable.The cables you use for the video determine the quality of the picture you’ll see on
yourTV when you’re playing DVDs. For more information about cables and signal quality, go to page 4.
Connect the video cable (yellow) to the OUTPUTVIDEO jack on the back of your DVD/VCR, and to theVideo
Input jack on yourTV (sometimes labeledVIDEO IN).
2d. S-VIDEO If yourTV has an S-VIDEO jack, connect one end of the S-Video cable (supplied with model
DRC8312 only) to the S-VIDEO IN jack on the back of theTV and the other end to the S-VIDEO OUT jack on
the back of the DVD/VCR.
If yourTV has an S-Video jack,
connect the S-Video cable
(supplied with model DRC8312
only). S-Video provides better
video quality than composite
video (the yellow jack).
COMPONENT OUT Y, Pb, Pr (not shown) If yourTV has Component Input Jacks (Y, Pb, Pr), you can
achieve even greater picture quality (DVD playback only) by connecting the DVD/VCR to theTV using these
jacks (COMPONENTVIDEO OUTPUT,Y, Pb, Pr on the DVD/VCR). For more explanation, go to page 4.
ComponentVideo cables not supplied with the DVD/VCR.
Notes:
If your TV is capable of progressive scan, connect the DVD/VCR to the TV using the COMPONENT VIDEO OUTPUT
jacks, and slide the PROG SCAN switch to the ON position to see DVD titles (movies) in progressive scan format. If
you need more explanation, go to page 6.
If you use the COMPONENT VIDEO connection (Y, Pb, Pr), you must connect another video cable (yellow or
S-Video) for VCR playback.The Component Out jacks are only for DVD playback.
3. Attach the AC power cord to the unit.
4. Insert the other end of the AC power cord into an AC outlet (or power strip).
Go to page 16
Graphics contained within this publication are for representation only.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
DVD/VCR +TV+ Satellite Receiver
SATELLITE
DISH
ANTENNA
The back of your
satellite receiver might
look different than the
one pictured here.
AUDIO OUT
DIGITAL OUT
PHONE JACK
R
LOW SPEED
DATA
VIDEO
SATELLITE IN
OUT TO TV
IN FROM ANT
S-VIDEO
L
2d
1
2c
2a
2b
CABLE/ANTENNA
DVD Playback Only
DVD/VCR
S-VIDEO
COMPONENT
DIGITAL
OUTPUT
VIDEO
INPUT
VIDEO OUTPUT
AUDIO OUT
Y
VIDEO
INPUT
DVD/VCR
IN
Pb
CABLE/ANTENNA
L
L
AUDIO
AUDIO
Pr
OUT
PROG.
SCAN
OUTPUT
R
R
OPTICAL
ON
OFF
AC-IN
CH4
CH3
4
3b
3c
TV
Important
3a
VIDEO
L
R
S-VIDEO
You can’t watch one satellite
program and record another
satellite program at the same
time.
INPUT1
INPUT2
CABLE/ANTENNA
The back of yourTV might look
different than the one pictured here.
Details about the different kinds of cables used to connect your DVD/VCR are on page 4.
To watchTV (satellite
Tune theTV to its Input 1 channel orVid 1 channel.
programming) with the DVD
Recorder turned on:
Tune the DVD/VCR to the INPUT 1 channel (press the INPUT button on the remote).
Tune the satellite receiver to the channel you want to watch.
To watchTV (satellite
programming) with the
DVD/VCR turned off:
Tune theTV to its CABLE/ANTENNA INPUT channel (usually channel 2, 3, or 4).
Tune the satellite receiver to the channel you want to watch.
Tune theTV to its Input 1 channel orVid 1 channel.
To play a disc or tape:
Tune theTV to its Input 1 channel orVid 1 channel.
To play a disc while recording to
tape:
Tune the DVD/VCR to the INPUT 1 channel (press the INPUT button on the remote).
Tune the satellite receiver to the channel you want to record. Press theVCR RECORD button on the
front of the DVD/VCR.
Put the DVD disc into the disc tray, and press MENU. Select DISC from the Main Menu and press PLAY on
the remote control.
Graphics contained within this publication are for representation only.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
Connection: DVD/VCR +TV + Satellite Receiver
The following instructions enable you to record the programs from your satellite receiver. Because the jack configuration
and labels vary on different satellite receivers and televisions, the steps provided are general guidelines. Consult your
satellite receiver and/or television user’s guides for additional information.
1. Satellite signal: Leave the cable in place that comes from the satellite dish and goes to the satellite receiver.
RF Coaxial cable
2. Connect the satellite receiver to the DVD/VCR
2a. Connect a coaxial cable to the satellite receiver’s OUTTOTV jack, and to the CABLE/ANTENNA INPUT jack
on the
DVD/VCR.
2b. Connect audio cables (red and white) to the satellite receiver’s output jacks [sometimes labeled Audio Left
(white) and Audio Right (red)]. Connect the other ends of these cables to the corresponding INPUT AUDIO L
and AUDIO R jacks on the back of the DVD/VCR.
2c. Connect the video cable (yellow) to theVideo Output jack on the satellite receiver (sometimes labeledVIDEO)
to the INPUTVIDEO jack on the back of the DVD/VCR.
2d. If your satellite receiver, has an S-VIDEO OUT jack, connect an S-Video cable to that jack and to the S-VIDEO
IN jack on the DVD/VCR for improved picture quality.
White
3. Connect the DVD/VCR to theTV
You need to connect cables from the DVD/VCR’s OUTPUT jacks to theTV’s INPUT jacks in order to see the
content from the DVD/VCR (whether it’s a satellite program or a disc you’re playing).
3a. Connect an RF coaxial cable to the DVD/VCR’s CABLE/ANTENNA OUTPUT jack and to theTV’s Antenna
Input jack (sometimes labeled CABLE/ANTENNA). It is important to make this connection so you can watch
satellite programs when the DVD/VCR is off.
Audio video cables are usually
color-coded red, white, and yellow.
Red= right audio;White = left
audio;Yellow = video.
3b. Connect the audio cables.
A set of audio/video cables was packed with your DVD/VCR. Connect the audio cables to the OUTPUT
AUDIO L (left – white) and R (right – red) jacks on the back of your DVD/VCR, and to the corresponding
Audio Input jacks on yourTV (sometimes labeled AUDIO IN L and R).
3c. Connect the video cable.The cables you use for the video determine the quality of the picture you’ll see on
yourTV when you’re playing DVDs. For more information about cables and signal quality, go to page 4.
Connect the video cable (yellow) to the OUTPUTVIDEO jack on the back of your DVD/VCR, and to theVideo
Input jack on yourTV (sometimes labeledVIDEO IN).
S-VIDEO If yourTV has an S-VIDEO input jack, connect one end of the S-Video cable (provided with model
DRC8312 only) to the S-VIDEO input jack on the back of theTV and the other end to the S-VIDEO OUT jack
on the back of the DVD/VCR.
If yourTV has an S-Video jack,
connect the S-Video cable
(supplied with model DRC8312
only). S-Video provides better
video quality than composite
video (the yellow jack).
COMPONENT OUTY, Pb, Pr (not shown) If yourTV has Component Input Jacks (Y, Pb, Pr), you can
achieve even greater picture quality (DVD playback only) by connecting the DVD/VCR to theTV using these
jacks (COMPONENTVIDEO OUTPUT,Y, Pb, Pr on the DVD/VCR). For more explanation, go to page 4.
ComponentVideo cables not supplied with the
DVD/VCR.
Notes:
If your TV is capable of progressive scan, connect the DVD/VCR to the TV using the COMPONENT VIDEO OUTPUT
jacks, and slide the PROG SCAN switch to the ON position to see DVD titles (movies) in progressive scan format. If
you need more explanation, go to page 6.
If you use the COMPONENT VIDEO connection (Y, Pb, Pr), you must connect another video cable (yellow or
S-Video) for VCR playback.The Component Out jacks are only for DVD playback.
4. Attach the AC power cord to the unit. Insert the other end of the AC power cord into an AC outlet (or power
strip).
Go to page 16
Important
You can’t watch one satellite program and record another satellite program at the same time.
This connection scenario illustrates a basic connection—you can achieve better video quality by connecting the
components with S-Video or ComponentVideo options, depending upon the cables you have and the jacks available on
your components. See page 4 for more information about jacks and cables.
Graphics contained within this publication are for representation only.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
DVD/VCR +TV + Basic Cable Box + Audio Receiver
TV
IN
Audio
ANTENNA
DVD
IN
FM 75Ω
GND
AM
Receiver
CENTER
SUBWOOFER (12Ω)
IN
VCR
OUT
1
DIGITAL AUDIO IN
–
–
+
+
Pr
The back of yourTV
and/or Cable Box might
look different than the
ones pictured here.
VCR
1
SAT
IN
R
—
FRONT
—
L
R
L
Pb
IN
AUDIO
3a
Y
OUT
S-VIDEO
S-VIDEO
(ONLY DVD)
R
—
REAR
—
L
SPEAKERS (6Ω)
VIDEO
OUT TO TV / MONITOR
3b
DVD/VCR
CABLE/ANTENNA
DVD Playback Only
DVD/VCR
S-VIDEO
COMPONENT
DIGITAL
OUTPUT
VIDEO
INPUT
VIDEO OUTPUT
AUDIO OUT
Y
VIDEO
INPUT
IN
Pb
CABLE/ANTENNA
L
L
1b
AUDIO
AUDIO
Pr
OUT
PROG.
SCAN
OUTPUT
R
R
OPTICAL
1a
ON
OFF
AC-IN
CH4
CH3
4
Cable Box
AUDIO
VIDEO
R
L
2c
CABLE IN
CABLE OUT
2b
VIDEO
L
S-VIDEO
S-VIDEO
R
2a
INPUT1
INPUT2
TV
CABLE/ANTENNA
Notes about cable boxes:
The connection diagram shown above reflects a basic setup. Since there are many different cable companies and types of cables boxes, your
cable box may come with a different recommended connection diagram. Normally,ANALOG cable boxes are used so that the cable company
can scramble the signal for premium channel programming (like movie channels).The cable box will descramble the signal if you are a premium
channel subscriber. In some cases, your cable company may not scramble the signal for basic channels and the signal could be passed through the
cable box so that you could receive the signal with the DVD/VCR.
There are also DIGITAL cable boxes that are relatively new and are used with digital cable service. Even with digital cable service, analog signals
are often carried on the same cable.
Using the connection diagram above, you won’t be able to watch one program while recording another program.This may be possible with a
more sophisticated setup, using an optional signal splitter and A-B switch.We suggest you contact your cable company for help in recommending
the best setup for your situation.
If you connect your components as described, you must access differentVideo Input Channels on yourTV to see programming. If you don’t know
how to accessVideo Input Channels on yourTV, go to page 19 for help.A general explanation, based on the connection shown above, follows:
To play a disc or tape:
Tune theTV to its Input 1 channel orVid 1 channel.
If you need help finding your TV’s various Video Input Channels, go to page 19.
* The remote control packed with your DVD/VCR is capable of being programmed to operate many brands and models of TVs. For instructions, go to page 22. If the
remote operates your TV, press TV and INPUT to access the Video Input Channel.
Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital HomeTheater Systems, Inc.
Graphics contained within this publication are for representation only.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
Connection: DVD/VCR +TV + Basic Cable Box
You’ll need to consult instructions that came with your audio video receiver in order to connect it
properly. The information below provides general guidelines for the DVD/VCR’s Audio Output Jacks.
Both Dolby* Digital® and DTS® are audio formats used to record 5.1-channel audio signals onto the digital track of
film (while the film is being made). Both of these formats provide up to six separate channels: left, right, center, left rear,
right rear, and common subwoofer.The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital
receiver or decoder, and if the disc is encoded in the Dolby Digital or DTS format.
RF Coaxial cable
Please Read This Before Using the DIGITAL AUDIO Jack!
This unit’s digital audio output jack is designed for a connection to a Dolby Digital or DTS receiver or decoder.
Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a connection can create a
high level of noise that may be harmful to your ears, and could damage headphones or speakers. It is important
to choose the correct Digital Output setting in the System Options menu. For more information, go to page 56.
Additionally, the DIGITAL AUDIO OUT connection is for DVD playback only. Make sure you connect audio cables
(white and red) for VCR playback. If you’re recording to disc and playing a tape at the same time, the VCR
playback must use the standard audio connection.
White
1. Connect the cable box signal.
Note: Before you connect the DVD/VCR, you’ll need to disconnect some of the cables first in order to reconnect
them.
1a. Connect the RF coaxial cable that is connected to the cable box’s Output jack (sometimes labeled CABLE
OUT) to the CABLE/ANTENNA INPUT jack on the back of the DVD/VCR.
Audio video cables are usually
color-coded red, white, and yellow.
Red= right audio;White = left
audio;Yellow = video.
1b. If your cable box has audio/video output jacks, connect the audio cables to the Audio Output L (left – white)
and R (right – red) jacks on the back of your cable box, and to the corresponding INPUT AUDIO jacks on your
DVD/VCR.Then connect the video cable (yellow) to theVideo Out jack on the back of your cable box, and to
the INPUTVIDEO jack on your DVD/VCR.
2. Connect the DVD/VCR to theTV
You need to connect cables from the DVD/VCR’s OUTPUT jacks to theTV’s INPUT jacks in order to see the
content from the DVD/VCR (whether it’s aTV program or a disc you’re playing).
2a. Use the RF coaxial cable that was packed with your DVD/VCR, and connect one end to the CABLE/ANTENNA
OUTPUT jack on the DVD/VCR. Connect the other end to the Cable/Antenna Input jack on the back of your
TV (sometimes labeled CABLE/ANTENNA).
2b. Connect the video cable.The cables you use for the video determine the quality of the picture you’ll see on
If yourTV has an S-Video jack,
connect the S-Video cable
(supplied with model DRC8312
only). S-Video provides better
video quality than composite
video (the yellow jack).
yourTV when you’re playing DVDs. For more information about cables and signal quality, go to page 4.
Connect the video cable (yellow) to the OUTPUTVIDEO jack on the back of your DVD/VCR, and to theVideo
Input jack on yourTV (sometimes labeledVIDEO IN).
2c. S-VIDEO If yourTV has an S-VIDEO jack, connect one end of the S-Video cable (supplied with model
DRC8312 only) to the S-VIDEO IN jack on the back of theTV and the other end to the S-VIDEO OUT jack on
the back of the DVD/VCR.
COMPONENT OUT Y, Pb, Pr (not shown) If yourTV has Component Input Jacks (Y, Pb, Pr), you can
achieve even greater picture quality (DVD playback only) by connecting the DVD/VCR to theTV using these
jacks (COMPONENTVIDEO OUTPUT,Y, Pb, Pr on the DVD/VCR). For more explanation, go to page 4.
ComponentVideo cables not supplied with the DVD/VCR.
3. Connect the DVD/VCR to the Audio/Video Receiver.
3a. A set of audio/video cables was packed with your DVD/VCR. Connect the audio cables to the OUTPUT
AUDIO L (left – white) and R (right – red) jacks on the back of your DVD/VCR, and to the corresponding
Audio Input jacks on your audio/video receiver (sometimes labeled DVD,AUX, SAT orVCR IN L and R).
The audio input jacks on the audio receiver you use to connect to the DVD/VCR will determine which source
or input you need to select on the A/V receiver when you want to watchTV or play a disc.
3b. If you have a Dolby Digital or DTS receiver, connect an optical cable to the DIGITAL AUDIO OUT jack on the
DVD/VCR and the Digital Audio Input jack on the receiver (cable not supplied with DVD/VCR).You must also
adjust the Digital Output setting (go to page 56 for information).
Note: Remove the protective cover that’s in the DIGITAL AUDIO OUT OPTICAL jack before connecting the cable.
Notes:
If your TV is capable of progressive scan, connect the DVD/VCR to the TV using the COMPONENT VIDEO OUTPUT
jacks, and slide the PROG SCAN switch to the ON position to see DVD titles (movies) in progressive scan format. If
you need more explanation, go to page 6.
If you use the COMPONENT VIDEO connection (Y, Pb, Pr), you must connect another video cable (yellow or
S-Video) for VCR playback.The Component Out jacks are only for DVD playback.
4. Attach the AC power cord to the unit.
5. Insert the other end of the AC power cord into an AC outlet (or power strip).
Go to page 16
Graphics contained within this publication are for representation only.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
Install Batteries in the Remote
1. Remove the battery compartment cover on the back of the remote.
2. Insert new batteries. Match the polarities (+ and –) on the batteries with the diagram inside the remote’s battery compartment.
3. Put the battery compartment cover back on the remote.
Important Battery Information
• If you’re not going to use the remote for a month or more, be sure to remove the batteries because they can leak and cause damage.
• Dispose of batteries in the proper manner, according to federal, state, and local regulations.
• Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if all batteries are not replaced at the same time, if
disposed of in fire, or if an attempt is made to charge a battery not intended to be recharged.
• Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury.
Point the Remote in the Right Direction and Put It in DVD/VCR Mode
When you want the remote to operate the DVD/VCR, point the remote at the DVD/VCR, not theTV.The remote has to be pointed in the correct direction and toward the
correct component in order for the remote control’s signal to communicate with the sensor on the component. Make sure there is a clear path between the remote control
and the component you want to operate, so the signal isn’t blocked.
Make sure the remote is in DVD/VCR mode—press the DVD/VCR button.
Turn on theTV and DVD/VCR
1. Turn on the DVD/VCR—press the DVD/VCR button on the remote.
2. Turn on theTV and tune it to the correctVideo Input Channel—if you have an RCA, GE, or ProscanTV, press theTV button on the remote (if theTV doesn’t turn on,
press the ON•OFF button) and then press the INPUT button on the remote until you get to theVideo Input Channel that matches how the DVD/VCR is connected to
theTV. If you used coaxial cable to connect to yourTV, tune yourTV to channel 3 or 4.
You’ll know you are on the rightVideo Input Channel when you see the DVD/VCR menu for the language selection (see below).
If you have another brand ofTV, turn on theTV and tune theTV to the correctVideo Input Channel (if you don’t know how to access theVideo Input Channel on your
TV, go to page 19 for help).
Note:You can program your remote to operate most brands of remote controllable TVs. Instructions are on page 22.
Complete the Interactive Setup
ON-OFF
TV
The next few pages step you through the series of screens that will appear the first time you turn on
your DVD/VCR.
DVD/VCR CABLE
Use the remote control to follow the on-screen instructions.The arrow buttons move the on-screen
SAT
AUX
AUDIO
highlight in the corresponding directions on the screen (up, down, left, right).
Press the OK button to select a highlighted item.
ZOOM EDIT
ANGLE
MENU
OPEN
CLOSE
Up arrow button
Notes:
TIMERïGUIDE
CLEAR
INFO
You can access the setup screens from the main menu. If you move, get a different program
provider for TV shows, or change your connections, you’ll need to complete the Interactive Setup
again.
Right arrow
button
Left arrow
button
OK
If you don’t see the Language selection screen (below) the first time you turn on the DVD/VCR,
make sure you’ve tuned your TV to the Video Input Channel that corresponds to the way you’ve
connected the TV to the DVD/VCR. If you need help, go to page 19.
OK button
AGAIN
ADVANCE
Down arrow
button
LIVE
VOL
CH
MUTE
GO
BACK
Use the arrow buttons on the remote to move through
on-screen menus and highlight different options. Press the
OK button to select a menu item that is highlighted.
1) Select on-screen menu language
English
Francois
Espanol
Make sure the remote is in DVD/VCR mode (press the DVD/VCR button). If you want the on-
screen menus to appear in English, press the OK button on the remote control. If you prefer
another language, press the arrow down button until that language is highlighted. Press OK to
select the language. Next, the connection screen appears.
Note: If you don’t see the Language selection screen the first time you turn on the DVD/VCR,
make sure you’ve tuned your TV to the Video Input Channel that corresponds to the way you’ve
connected the TV to the DVD/VCR. If you need help, go to page 19.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Chapter 1: Connections and Setup
2) Select the Signal that’s connected to the CABLE/ANTENNA
INPUT jack
Antenna-Cable
Antenna-Cable
Completing this information lets the DVD/VCR know what program signals are being sent to it.
Choose the type of signal that is connected to the CABLE/ANTENNA INPUT jack. Press the
right arrow button to access the choices:
Notes: If you’ve connected a cable box or satellite receiver to the CABLE/ANTENNA INPUT jack,
turn on the cable box or satellite receiver before completing this step.
If you’ve connected a satellite receiver to the CABLE/ANTENNA INPUT jack, choose Antenna
Only for this step.
Done
Cable-Antenna (cable service)
Antenna Only (no cable service, just off-air antenna)
Note: If the DVD/VCR doesn’t start searching for channels after you’ve selected the type
of signal connected to the CABLE/ANTENNA INPUT jack, press the down arrow button to
highlight Done and press OK.
3) Channel Search
The DVD/VCR automatically scans the signal coming through the cable connected to the CABLE/
ANTENNA INPUT jack and prepares the channel list.The channel list determines what channels
appear when you press the CH+ and CH- buttons.
Searching channels.
35% complete
2 channels found
A progress indicator appears on theTV screen.When the Channel Search reaches 100%, press
OK (the Channel List appears). If the Channel List doesn’t appear, check the CABLE/ANTENNA
INPUT jack to make sure the cable is connected properly.
Note: If you are using only a cable box or satellite receiver, there will be few, if any, channels in
the channel list.
4) Channel List
The Channel List contains the channels you tune to when you press the CH+ and CH- (channel
up and channel down) buttons on the remote control. From the Channel List screen, you can
delete channels you rarely watch.You’ll still be able to tune to the “deleted” channels directly by
using the number buttons on the remote control, but the DVD/VCR won’t tune to a channel you
delete when you press the CH+/CH- buttons on the remote control.
Use the arrow buttons to scroll through the channels.A checkmark in the box next to the
channel means it has been stored in the channel list. Highlight the channel and press OK to check
or uncheck the box.You can also label channels by pressing the INFO button.
To skip editing the channel list, press STOP.
5) Time Zone
Select your local time zone:
Use the down arrow button to highlight your time zone, and press OK (the Daylight SavingsTime
screen appears).
Eastern
Central
Mountain
6) Daylight SavingsTime
Should the clock be
automatically adjusted for
daylight savings time?
If you live an area that recognizes Daylight SavingsTime, press OK (the DVD/VCR’s internal clock
will automatically advance the time by 1 hour in the spring and set the clock back by 1 hour in
the fall).
If you live in an area that doesn’t use Daylight SavingsTime, press the right arrow button to
highlight No, and press OK.
Yes
No
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Chapter 1: Connections and Setup
7) Time and Date
Your DVD/VCR has an automatic clock, but it may take awhile for the DVD/VCR to find the
correct channel for the clock.Therefore, you might want to set up the clock manually here.
Year
2005
Use the number buttons on the remote to enter Year, Date, and Time.To change the AM/PM setting
when you’re entering theTime, press the right arrow button.
Date
04/29 Fri 29-April
01:47 PM
Time
Notes:
Auto Clock
If this screen doesn’t appear, you can set the time later from the main menu—with the remote
in DVD/VCR mode, press MENU, select Setup, select Installation, select Clock Setup and follow the
on-screen instructions.
Done
The DVD/VCR is equipped with a clock that automatically keeps the time accurate. If you have
any problem with the time being accurate, simply turn off the AutoClock option (page 58).
Access the main menu, choose System Options, and then AutoClock. Follow the instructions to
disable it, and set the time manually using the Clock Setup menu option that you access via the
Setup/Installation menu.
WatchTV
Live - Ch 2
No Disc
Watch TV
Disc
Tape
When the set-up procedure is complete, the main menu appears with the WatchTV menu highlighted.
To watchTV, just press the OK button on the remote.
1 Library Disc(s)
Disc Library
Timers
Setup
10:49 am Thu 17-Mar 2004
To watch channels, or video inputs, press OK
What to Expect
Turn on the DVD/VCR toWatchTV
In order to use the features of the DVD/VCR, you’ll have to get used to turning on your DVD/VCR to watchTV.
You also need to tune theTV to theVideo Input Channel—instead of changing channels with theTV’s channel up and channel down buttons, you change channels via the
DVD/VCR’s channel up and down buttons (or number buttons).TheTV stays on theVideo Input Channel that corresponds to the Input Jacks on theTV you used to connect
theTV to the DVD/VCR. If you need help finding theTV’sVideo Input Channel, go to page 19.
The Main Menu Appears
The main menu appears whenever you turn on the DVD/VCR.To watchTV, press the OK button when theWatch TV menu is highlighted.When you change channels, the
channel banner appears to give you programming information that is available (for more information, go to page 30).
Changing Channels
You might notice a slight delay when you’re changing channels because the signal goes to the DVD/VCR and is then sent out to theTV.
Discs for Recording
Recording to DVD discs is new to many people.There are several different formats of DVD discs. For your DVD/VCR, only DVD+R 2.4x, 4x, 8x, or 16x and DVD+RW 2.4x
and 4x type discs can be used for recording.A DVD+RW disc is “rewritable” which means you can use the disc over and over again (similar to how you useVCR tapes to
record).Additionally, DVD+RW discs have many “digital features” for editing the disc’s content. DVD+R discs can only be used one time—you can’t record over existing
programs and you must get used to “finalizing the disc” in order for other DVD players to be able to play DVD+R discs.Throughout this User’s Guide, you’ll notice that
some features and menu options are only available for a specific type of disc.
Make sure you use discs from a reputable manufacturer. Many problems encountered when recording (or playing) discs are related to the wide
variation in disc quality due to the large number of brands and manufacturers. If you encounter problems with one brand of disc, please try another
brand.
VCR (Digital vs.Analog)
YourVCR is equipped with two modes: digital and analog.The DVD functions always go through the digital path.There is only one digital path.Therefore, if you are using any
VCR functions at the same time you’re using DVD functions, theVCR switches to the analog path.
Note:The DVD/VCR will change to the analog VCR path automatically during simultaneous operations. When the VCR is in analog mode, the on-screen InfoDisplay
isn’t available and the VCR menu system will look different than the menus represented in this User’s Guide.
Smart Play
Your DVD/VCR is an integrated product.The DVD/VCR intuitively knows whether aVCR tape or a DVD disc has been loaded, and acts accordingly when you press the
PLAY button on the remote. If you have both aVCR tape and a DVD disc in the DVD/VCR, the main menu appears and you must select the appropriate media (tape or disc)
by highlighting the appropriate menu (Tape or Disc) so the DVD/VCR knows what to do.
Graphics contained within this publication are for representation only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Connections and Setup
How to find yourTV’sVideo Input Channel
In order to see what’s playing on your DVD/VCR, you need to tune theTV to theVideo Input Channel that corresponds to the Input Jacks on yourTV that you used to
connect the DVD/VCR to theTV.TheVideo Input Channel(s) varies for different brands and different models ofTVs.
RCA, GE, and ProscanTVs
If your brand ofTV is RCA, GE, or Proscan, the remote control packed with your DVD/VCR will most likely access theTV’sVideo Input Channel—with the DVD/VCR turned
on, press theTV button, and then press INPUT until you see the DVD/VCR’s menu on yourTV screen.
Other Brands ofTVs
Since access to aTV’sVideo Input Channel varies from one manufacturer to the next, it’s difficult to provide specific instructions for your particular brand. However, a list of
suggestions is provided below.
•
•
Consult the Instruction Manual that came with yourTV.
If you can’t find the information in the manual, or can’t find the manual, review the following list.
•
•
•
•
There might be a button on theTV’s remote control that accesses theVideo Input Channel (see table below for examples).
You might select theVideo Input Channel from theTV’s menu system.
You might tune to it by pressing a specific channel number (see table below).
Press the Channel up and/or down buttons on theTV’s remote control (sometimes theVideo Input Channel is stored in yourTV’s channel list).
Video Input Channel Variations
Button/Switch
on theTV
VIDEO
Button on the
TV remote
Channel
Number
00
VID1
LINE
VID
S-VID
93
SIGNAL
VID 1
INPUT
SOURCE
AUX
90
91
92
VID 1
VID 2
INPUT
VID 2
VIDEO
SOURCE
Next Steps
This chapter is dedicated to connecting your DVD/VCR. Choose what you want to do next, and go to the appropriate chapter for instructions.
Chapter 2:The Remote Control (page 20)
A description of each button is in Chapter 2.Additionally, the universal remote control can be programmed to operate many brands and types of components. Go to page 22
for instructions.
Chapter 3: Recording, Playback & Features (page 29)
This chapter tells you how to record and playback programs, how to use the Disc Library and special editing features. Instructions for copying aVHS tape to a DVD disc are
in this chapter.
Chapter 4: Playing Discs (page 42)
If you’re ready to pop in a DVD (or a CD), this chapter explains how different discs function in the DVD/VCR and describes the features you can use with different types
of discs.
Chapter 5:The DVD/VCR’s Menu System (page 52)
Since this product is multi-functional, there are many on-screen menus to control settings and access features. Chapter 5 describes the menus and why you would want to
use them.
Chapter 6:Additional Information (page 59)
If you’re having trouble, go to Chapter 6. It includes troubleshooting information, the product’s warranty, and accessories you might want to purchase.
Graphics contained within this publication are for representation only.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
The Remote Control
•
•
•
•
•
•
Explanation of the Buttons
Find Out if the Remote Can OperateYourTV
Programming the Remote to OperateYourTV
Programming the Remote to Operate Other Components
Using the Remote’s Features
Code Lists
Graphics contained within this User’s Guide are for representation only. Some
of the menu screens, buttons, and display messages might be different in your
product than they appear in this book.The on-screen help text provides the
most current operational information.
page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
Explanation of Buttons
ON-OFF
TV
You can use this remote to operate the DVD/VCR, and to access the features available.The remote is also designed to
operate most RCA, GE, and Proscan components (TVs,VCRs, DVD players, audio components and satellite receivers).
If you have another brand, you can program the remote control to operate those components (go to page 23 for
instructions).
DVD/VCR CABLE
SAT
AUX
AUDIO
The descriptions that follow describe how each button works when operating the DVD/VCR. Many buttons will perform
different functions depending upon the type of disc and menu functions of the disc.
ZOOM EDIT
ANGLE
OPEN
CLOSE
0-9 (Number buttons) Use the number buttons to input information such as chapter numbers, track numbers, to make
selections on some menu screens, and/or to change channels.
TIMER•GUIDE INFO
MENU
CLEAR
Arrow buttons (up, down, left, right) Use the arrow buttons to highlight options that appear on the screen (the
arrow buttons move the highlight in the corresponding directions—up arrow moves the highlight up; left arrow moves the
highlight left, etc.).
OK
AGAIN
ADVANCE
ADVANCE When playing a disc or tape, moves forward approximately 30 seconds. Not applicable forVCDs or mp3
files.
LIVE
AGAIN Accesses the Scene Again™ feature—replays the last several seconds (approximately 10) of the DVD disc or
tape you’re playing. Not applicable forVCDs or mp3 files.
VOL
CH
MUTE
1
GO
ANGLE Accesses various camera angles that might have been added to a pre-recorded disc when it was created. Not
available on all discs.
BACK
2
3
6
9
ANTENNA Acts like aTV/VCR button that is on mostVCRs—on your DVD/VCR switches the RF Output between the
TV/cable signal and the DVD/VCR output. In SAT mode, functions as aTV/SAT button for an RCA satellite receiver.
4
5
8
AUDIO Puts the remote in audio mode to operate a component, such as an audio receiver or amplifier, that you’ve
programmed to work with this button.
7
AUX Puts the remote in auxiliary mode to operate a component (such as a cable box,VCR, DVD player, satellite
INPUT
0
ANTENNA
receiver, or audio receiver) that you’ve programmed to work with this button.
REVERSE PLAY FORWARD
CABLE Puts the remote in cable box mode so the remote operates a cable box that you’ve programmed to work with
this button.
RECORD
STOP
PAUSE
CH+ Advances to the next chapter or track when you’re playing discs. Goes to the next channel in the channel list when
watchingTV.
The Universal Remote Control that came with
your DVD/VCR operates most RCA, GE, and
Proscan branded components.
CH – When playing a disc, goes to the beginning of the current chapter or track, unless you’re within the first minute
of a chapter or the first 15 seconds of a track—then you’ll skip to the beginning of the preceding chapter or track.When
watchingTV, goes to the previous channel in the channels list.
Additionally, the remote is capable of being
programmed to operate many other brands and
models of components.
CLEAR During playback, removes on-screen menus and displays.
DVD/VCR Turns on the DVD/VCR and puts the remote in DVD mode so it operates the DVD/VCR.
EDIT When playing a disc, displays the Info Display and Edit menu (see page 36 for details).
FORWARD Searches forward through the disc or tape.
GO BACK Returns you to the previous menu.When watchingTV, goes back to the previous channel.
INFO Displays the on-screen Info Display (for details about the Info Display, go to page 45.)
INPUT Accesses the Input jacks on the Recorder (CABLE/ANTENNA INPUT, INPUT 1, and INPUT 2 on the front of the DVD/VCR). InTV mode, toggles through the
available input sources for some compatibleTVs. If your DVD/VCR is on but you don’t see a picture or menus on yourTV, try pressing theTV button and then the INPUT
button to access the proper input jacks.
LIVE When the Main menu is on the screen, provides quick access to watchTV.
MENU When you’re not playing a disc, accesses the DVD/VCR’s menu.When you’re playing a disc, accesses the disc’s menu, if one is available.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OPEN•CLOSE Opens and closes the disc tray.
OK When a menu is on the screen, selects the highlighted item.
ON•OFF Turns the DVD/VCR on and off. In other modes (TV, SAT, CABLE,AUX,AUDIO), and if programmed, turns the component on and off.
PAUSE Pauses disc or tape playback or recording.
PLAY Begins disc or tape playback.
RECORD Records programming.
REVERSE Searches backward through a disc or tape.
SAT Puts the remote in Satellite mode in order for the remote to operate a satellite receiver.This remote is capable of being programmed to operate many brands of
satellite receivers.This remote is already programmed to operate most RCA, GE, and Proscan brand satellite receivers.
STOP Stops playback or recording.
TIMER•GUIDE Allows you to quickly access theTimer Recordings list or setup a new timer recording.
TV Puts the remote inTV mode in order for it to operate yourTV.This remote is already programmed to operate RCA, GE, and Proscan brandTVs.This remote is capable
of being programmed to operate many brands ofTVs.
VOL +/- Increases and decreases the volume level. Is capable of operating many brands ofTVs or audio receivers.
ZOOM Enlarges the image on the screen so you can zoom in on details.To pan and scan after you’ve zoomed in on an image, use the arrow buttons.The Zoom feature
isn’t available on all discs.Typically, it works with DVD discs and CD-Rs with JPEG files.
Graphics contained within this publication are for representation only.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
ON-OFF
Find out if the remote can operate yourTV
ON•OFF button
TV button
TV
This remote control is designed to operate most RCA, GE, and ProscanTVs.
DVD/VCR CABLE
1. Press theTV button (if theTV turns on, this remote will operate yourTV; if it doesn’t turn on, go
to step 2 below).
SAT
AUX
AUDIO
2. Press the ON•OFF button (if theTV turns on or off, this remote will operate theTV).
3. If that doesn’t work, you can try programming the remote by following the instructions below.
ZOOM EDIT
ANGLE
OPEN
CLOSE
Programming the remote to operate yourTV
TIMER•GUIDE INFO
MENU
CLEAR
There are two ways to program this remote control to operate other brands ofTVs: Direct Entry
and Automatic Code Search (both methods are described below).
OK
Direct Entry
AGAIN
ADVANCE
1. Turn on theTV.
2. Look up the brand and code number(s) from the list that starts on page 25.
3. Press and hold theTV button on the remote.
4. Keep holding down theTV button, and enter the first code from the code list for your brand.
5. Release theTV button.
Tips
The component button corresponding to the mode
you’re in flashes when the remote batteries are low
and you press a button on the remote.
6. Point the remote toward theTV and press the ON•OFF button to see if theTV turns off. If it
doesn’t, press theTV button and then press ON•OFF. If you get no response, follow these steps
again, but enter the next code from the code list for your brand of television.
To turn off most RCA components that are connected
to the DVD/VCR, press ON•OFF twice within two
seconds and hold the remote steady until the indicator
turns off.
7. If you have tried all of the codes listed for your brand and this remote still doesn’t operate theTV,
try the Automatic Code Search method (next section). If Automatic Code Search method doesn’t
find the correct code, this remote won’t work with yourTV and you’ll have to use the remote
that came with yourTV.
Note:This remote may not be compatible with all brands and models of televisions.
ON-OFF
Automatic Code Search
ON•OFF button
The Automatic Code Search method for theTV button tests all of theTV codes. If you want to stop
the automatic code search without programming theTV button to operate yourTV, press CLEAR
until the indicator on the remote turns off.
TV
TV button
DVD/VCR CABLE
SAT
AUX
AUDIO
1. Turn on theTV.
Indicator light
2. Press and hold theTV button.While you continue pressing theTV button, press and hold the
ON•OFF button until theTV button turns on—then release both buttons.
ZOOM EDIT
ANGLE
OPEN
CLOSE
3. Point the remote at theTV. Press and release PLAY, then wait 5 seconds or until theTV button
stops flashing.
TIMER•GUIDE INFO
MENU
CLEAR
At this point the remote is searching for the correct code to program (you’ll know it’s found
the correct code when theTV turns off, go to step 4). If, after 5 seconds, theTV doesn’t turn off,
press PLAY again to tell the remote to search the next set of codes.
OK
Continue pressing and releasing PLAY (at 5 second intervals) until theTV turns off or you have
searched through all of the codes.The component buttons flash when all codes have been
searched, theTV button turns off, and the remote exits Automatic Code Search.
AGAIN
ADVANCE
LIVE
4. When theTV turns off, the remote has found the proper code. Press and release REVERSE, then
wait 2 seconds. Repeat this step until theTV turns back ON.
VOL
CH
5. To finish, press and hold STOP until theTV button turns off.
MUTE
1
GO
BACK
•
If you try all the codes for yourTV brand and none work, the remote is not compatible with your
TV.
2
3
6
9
4
5
8
7
INPUT
0
ANTENNA
PLAY button
REVERSE PLAY FORWARD
REVERSE button
RECORD
STOP
PAUSE
STOP button
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Chapter 2:The Remote Control
Programming the Remote to Operate Other Components
This remote is already programmed to operate most RCA, GE, and Proscan components—just press the applicable component button to operate the component (for a
satellite receiver, press the SAT button; for an audio component, press AUDIO, etc.).
There are two ways to program this remote control to operate other brands of satellite receivers, cable boxes, and/or other compatible components: Direct Entry and
Automatic Code Search (both methods are described below).
Direct Entry
1. Turn on the component you want to program the DVD/VCR remote to operate (satellite receiver,VCR, etc.).
2. Look up the component, brand, and code number(s) from the list (see pages 25-28).
3. Press and hold the appropriate component button on the remote (i.e, SAT for satellite receiver; CABLE for cable box; or AUDIO for an audio component).The AUX
button can control many different types of components includingVCRs,TVs, audio components, satellite boxes, cable boxes, or DVD players.You must use the Direct
Entry method to program the AUX button unless you want to program it to operate aVCR (Automatic Code Search for the AUX button only accesses theVCR codes).
4. Keep holding down the component button, and enter the first code from the code list for your brand. If the indicator light flashes, you’ve entered an invalid code or the
button isn’t programmable.
5. Release the component button.
6. Point the remote toward the component and press the ON•OFF button to see if it turns off. If it doesn’t, press the component button and then press ON•OFF. If you get
no response, follow these steps again, but enter the next code from the code list.
Note:This remote may not be compatible with all brands and models of components.
Automatic Code Search
The Automatic Code Search method searches all of the codes for the default component of a specific component button. If you want to stop the automatic code search
without programming the remote, press CLEAR until the indicator on the remote turns off.
Note:You can only use Automatic Code Search to program the AUX button if you want the button to operate a VCR—you must use Direct Entry (above) if you
want to program the AUX button to operate other components.
1. Turn on the component you want to operate (audio system, cable box, satellite receiver, etc).
2. Press and hold the component button you want to program (SAT, CABLE, or AUDIO).While you continue pressing the component button, press and hold the ON•OFF
until the component button on the remote turns on—then release both buttons.
3. Point the remote at the component.
4. Press and release PLAY, then wait 5 seconds or until the component button stops flashing.
At this point the remote is searching for the correct code (you’ll know it’s found the correct code when the component turns off, go to step 5). If, after 5 seconds, the
component doesn’t turn off, press PLAY again to tell the remote to search the next set of codes.
Continue pressing and releasing PLAY (at 5 second intervals) until the component turns off or you have searched through all the codes.The component buttons flash
when all codes have been searched, the component button turns off, and the remote exits Automatic Code Search.
5. When the component turns off, the remote has found the proper code. Press and release REVERSE, then wait 2 seconds. Repeat this step until the component turns
back ON.
6. To finish, press and hold STOP until the component button turns off.
•
If you try all the codes for your component brand and none work, the remote is not compatible with your component.
Using the Remote’s Features
Very Important: Know the mode
Once you’ve programmed the remote to operate other components, you need a basic understanding of how the remote control works.The codes in the remote control
that make a component act a specific way are mode dependent—if you want to change settings in yourTV’s menu, you must press theTV button before you press the
MENU button so the remote control knows that you want to access theTV’s menu system.
To summarize, to operate the DVD/VCR you must first press the DVD/VCR button; to operate theTV, you must first press theTV button; to operate a satellite receiver, you
must first press the SAT button; to operate the cable box, you must first press the CABLE button; etc.
To let you know which mode you’re in, the component button that is active lights when you press a button.
Understanding the INPUT button
Another important button is the INPUT button.The INPUT button selects the programming from a specific component that is connected to one of the input jacks on the
DVD/VCR.We call theseVideo Input Channels because you are telling the component to send the video (and audio) that corresponds to theVideo Input jack you used to
connect the component to the DVD/VCR. For example, if you connected a satellite receiver to your DVD/VCR by using the S-VIDEO IN jack, you would need to press
DVD/VCR (to tell the remote you want to operate the DVD/VCR) and then press and release INPUT until the S-Video Input Channel appears (if the satellite receiver is on,
you’ll see the program it is tuned to, and S-VID appears in the DVD/VCR’s channel banner to let you know which “channel” the DVD/VCR has accessed.
Low Battery Indicator
When the batteries are low, the indicator light and the component button light flicker when a button is pressed.
Graphics contained within this publication are for representation only.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
Volume Punchthrough Feature
You may find this feature helpful if you’ve connected your components to an audio/video receiver (A/V receiver) or amplifier, but you want to use theTV’s remote control to
operate the volume for the receiver.An example follows:
Let’s say you’ve connected your DVD player to your audio/video receiver.You’ve also programmed yourTV remote control to operate your DVD player. Since the DVD
player gets its volume through the audio/video receiver, you would have to bounce back and forth between two remote controls: the A/V receiver’s remote to adjust the
volume and theTV’s remote control to operate the DVD player.
TheVolume Punchthrough feature eliminates the need for you to use two remote controls and saves a button press when you’re using theTV remote to adjust the volume.
In effect, you are telling theTV remote to retrieve and send volume commands from the A/V receiver whenever theTV remote is in DVD mode.
Therefore, after you’ve successfully set up theVolume Punchthrough feature, whenever theTV remote is in DVD mode (press the DVD button) and you want to adjust the
volume, you only have to press theVOL + orVOL- buttons. Follow the instructions below to set upVolume Punchthrough.
1. IMPORTANT: First, you must program the AUDIO button on theTV’s remote control to operate your audio receiver or amplifier. Go to page 23 for instructions. If you
can’t program this remote to operate your audio receiver,Volume Punchthrough won’t work.
2. While setting upVolume Punchthrough, it’s best to point the remote away from components.
3. Decide which mode the remote will be in when the volume from the audio receiver “punches through.”The mode will be one of the component buttons (TV, DVD, SAT/
CAB,VCR, or AUX).
4. Press and hold theVOL- button. Keep pressingVOL- while you press and release the component button you chose in step 3 (TV, DVD, SAT/CAB, or AUX).
5. Press and release the AUDIO button since the sound will be coming from the audio/video receiver. Release theVOL- button.
6. Now, test it by turning on your audio receiver or amplifier.
7. Turn on the component that is connected to the audio/video receiver or amplifier (a DVD player, for example).
8. Put theTV’s remote in DVD mode by pressing the DVD button, and play a disc.
9. PressVOL+ orVOL-.The volume from the audio receiver should increase or decrease accordingly.
Deleting ALLVolume Punchthrough Commands
To delete all programmedVolume Punchthrough settings and return the remote control back to the factory defaults, press and hold theVOL- button (the component button
of theVolume Punchthrough lights).While holding theVOL- button, enter 000 using the number buttons.All component buttons turn on for 2 seconds and then turn off.The
remote returns to the factory settings.
Note: If an invalid button is pressed, all component buttons blink 4 times and turn off. At this point, you must start over.
Graphics contained within this publication are for representation only.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
Remote Code List
Craig
1026
Crown
1026
1038
1127
1131
1138
Infinity
1038
LG
1050
1051
Philco
1004
1005
1006
1007
1008
1011
1018
1038
1040
1041
1046
1048
1060
1121
Sansui
1109
1149
TV
1006
TV button
AUX button
Janeil
Loewe
1038
Mitsubishi
1005
Radio Shack
Envision
1005
1007
1098
1029
1045
1130
1157
Sanyo
1005
1028
1029
1045
1051
1065
1066
1093
1103
1006
1007
1018
1020
1030
1050
Admiral
1002
JBL
1038
Logik
1002
Curtis Mathes
1001
1005
1007
1014
1029
1045
1063
1095
1119
1130
1157
1097
1118
Fisher
1028
1029
1030
1045
JC Penney
1001
1005
1006
1007
1008
1012
1020
1031
1032
1034
1035
1044
1054
1062
1063
1081
1095
1096
1104
1130
1132
1147
1157
Luxman
1005
1007
Radio
Shack/Realistic
Aiko
1015
1001
1005
1007
1011
1026
1029
1045
1061
1095
1096
LXI
1001
1007
1029
1038
1043
1044
1045
1104
1116
1130
1132
1147
1157
1051
1052
1079
Akai
1003
1103
Fujitsu
1027
Amtron
Philips
1004
1005
1008
1011
1018
1038
1040
1041
1046
1053
1054
1055
1056
Montgomery
Ward
1002
Scott
1005
1007
1011
1021
1025
1026
1027
1026
Funai
1026
1027
Anam
National
1004
Motorola
1004
1097
Daewoo
1005
1006
1007
1015
1016
1017
1080
1095
GE
1026
1110
1111
1112
1000
1001
1004
1005
1007
1020
1031
1032
1054
1104
1120
1130
1132
1157
1158
RCA
1000
1001
1004
1005
1006
1007
1018
1102
1104
1108
1130
1132
1138
1144
1155
1157
1158
MTC
1005
1006
1007
1063
Sears
1001
1005
1007
1012
1013
1018
1027
1028
1029
1030
1039
1043
1044
1045
1067
1068
1103
1104
1107
1130
1132
1147
1157
AOC
1005
1006
1007
1099
1100
1113
Magnavox
1005
1007
1008
1018
1038
1040
1041
1046
1047
1048
1055
1082
1083
1124
1125
1129
1139
Multitech
1026
1108
NAD
1007
1043
1044
1106
1126
1147
Pioneer
1005
1007
1057
1058
1059
1102
1106
1126
Daytron
1005
1007
Apex
1140
1148
1150
1095
Jensen
1005
Dimensia
1001
1130
1007
Audiovox
JVC
1011
1012
1013
1032
1037
1039
1089
1090
1105
1127
1146
Goldstar
1005
1006
1007
1011
1018
1033
1034
1035
1087
1088
1095
1096
NEC
1004
1005
1006
1007
1010
1026
1157
Bell & Howell
Dumont
1005
1084
1138
1002
1029
1045
Portland
1005
1006
1007
1015
Realistic
1029
1045
1130
1157
Electroband
1003
Broksonic
1143
Nikko
1007
1015
Electrohome
1151
Majestic
1002
1003
1004
1005
1007
1018
1019
1020
1095
Runco
1084
Celebrity
Onwa
1026
Price Club
1063
1003
Marantz
1005
1007
1036
1038
Sampo
1005
1007
1095
1096
Centurion
Optimus
1106
1126
Sharp
1005
1007
1011
1022
1023
1061
1069
1070
1071
1077
1095
1097
Prima
1142
Kawasho
1003
1009
Hallmark
1005
1007
Citizen
1005
1007
1008
1015
1026
1045
1063
1095
1119
1005
1007
Prism
1032
Optonica
1061
1097
1049
Emerson
1005
1007
1011
1021
1022
1023
1024
1025
1026
1027
1029
1045
1078
1095
1101
1102
1109
1156
Kenwood
1005
Proscan
1000
1001
1104
1130
1132
1157
1158
Hisense
1141
Megatron
1007
1036
Samsung
1005
1006
1007
1011
1014
1018
1062
1063
1064
1095
1096
1114
Orion
1025
1109
1007
1018
Hitachi
1005
1007
1011
1012
1013
1036
1037
1102
1126
1134
1135
1136
1137
1138
Memorex
1002
1006
1007
1029
Kloss
Novabeam
1026
Panasonic
1004
1032
1038
1094
1121
1128
1152
1153
1040
1041
1098
Colortyme
1005
Proton
1005
1007
1045
Signature
1002
1072
1007
1010
MGA
1005
1006
1007
1018
1020
1030
KTV
1026
1042
1095
1101
1011
Contec/Cony
Sony
1003
1115
1122
1123
Quasar
1004
1032
1011
1012
1013
1026
1133
1042
Graphics contained within this publication are for representation only.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
Code List forTV button
TV (continued)
Soundesign
1005
1007
1008
1026
Toshiba
1029
1043
1044
1045
1063
1067
1074
1075
1091
1092
1145
1147
2006
2010
2013
2015
2018
2019
2021
2061
2074
2001
2002
2010
2018
2019
2061
2064
2074
2087
2088
Kenwood
2006
2007
2008
2013
2015
2058
2065
2041
2042
2060
2065
Philips
2018
2038
2048
2066
2061
2064
2067
2071
2074
2075
2078
2087
2088
VCR
AUX button
Admiral
2069
Montgomery
Ward
2069
1027
Pioneer
2007
2034
2043
2065
Aiko
Starlite
1026
2024
Motorola
2018
2069
Aiwa
KLH
2037
Supre-Macy
1098
2023
Daewoo
2012
2014
2016
2022
2023
2024
2057
Realistic
2008
2010
2011
2012
2018
2019
2020
2023
2025
2030
2048
2069
Akai
2003
2004
2005
2058
2059
2060
Go Video
2073
2076
Kodak
2011
2018
Portland
2013
2014
2016
2057
MTC
2010
Sylvania
1005
1007
1008
1018
1038
1040
1041
1046
1047
1048
1055
1073
1092
1154
Multitech
2010
2013
2023
2032
Totevision
1095
Goldstar
2006
2011
2015
2033
LG
2011
Universal
1031
1054
Proscan
2000
2001
2002
2074
Logik
2037
Audiovox
Daytron
2057
2037
2011
LXI
2011
2036
Wards
1001
1002
1005
1006
1007
1018
1021
1024
1027
1031
1038
1040
1041
1046
1047
1054
1055
1061
1076
1130
1157
NEC
2006
2007
2008
2013
2015
2058
2065
Bell & Howell
Dimensia
2002
2074
Gradiente
2023
2008
Magnavox
2018
2019
2038
2039
2053
2055
2066
2087
2088
Broksonic
2009
Harman
Kardon
2006
Ricoh
2072
Electrohome
2011
2025
Quasar
2018
2019
2022
2083
Runco
2053
Harwood
2037
Calix
Symphonic
1024
1026
2067
Emerson
2003
2009
2011
2012
2018
2021
2022
2023
2025
2026
2027
2028
2029
2040
2060
2062
2068
2070
2084
2011
Samsung
2005
2010
2012
2028
2032
2059
2079
2085
Radio Shack
Hitachi
2034
2035
2036
2054
Nikko
2011
Canon
2018
2011
2048
2069
Marantz
2006
2007
2008
2013
2015
2018
2038
1107
Noblex
2010
2019
Tandy
1097
Capehart
2017
Radio
Shack/Realistic
Olympus
2018
2058
2064
Tatung
1004
2057
2008
2010
2011
2018
2019
2020
2023
2025
2030
2048
Optimus
2011
2069
Carve
JC Penney
2006
2007
2008
2009
2010
2011
2018
2019
2031
2034
2035
2037
2038
2054
Technics
1032
2038
Sansui
2007
2047
2058
2065
CCE
2024
2037
Techwood
1005
1007
Matsushita
2018
Optonica
2048
Memorex
2008
2010
2011
2018
2020
2023
2053
2069
Panasonic
2018
2019
2056
2067
Citizen
2010
1032
Teknika
1002
1005
1006
1007
1008
1011
1012
1013
1015
1026
1027
1047
1063
1094
1095
1121
1128
Yamaha
1005
1006
1007
1018
Sanyo
2008
2010
2020
2080
2011
2012
2013
2014
2015
2016
2024
Radix
2011
Pentax
2013
2034
2035
2054
RCA
2000
2001
2002
2003
2010
2018
2034
2035
2044
2045
2046
2054
Zenith
1002
1005
1084
1085
Fisher
2008
2020
2030
2031
Scott
2009
2012
2022
2027
2029
2040
2062
2011
2018
2023
2052
MGA
2025
2040
2060
Colortyme
2064
Jensen
2034
2035
2006
Pentex
Research
2015
Craig
2010
2011
2020
2037
1086
1117
Fuji
2004
2018
2063
Minolta
2034
2035
2058
Philco
2018
2019
2038
2039
JVC
2006
2007
2008
2015
2058
2065
2077
2054
Funai
2023
Curtis Mathes
Mitsubishi
2025
2034
2035
2040
2002
Garrard
2023
Telecaption
1074
GE
2000
Graphics contained within this publication are for representation only.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
Code List
VCR (continued) AUX button
Sears
2008
2011
2018
2020
2030
2031
2034
2035
2054
2018
2023
2052
5088
5090
5091
5092
5093
5094
Panasonic
3006
3021
3056
3057
Philips
5012
5013
5014
5015
5019
5025
5029
5030
5031
PVR
DVD
Cable Box
CABLE button
AUX button
ABC
5003
5004
5005
5007
5046
CD Player
AUDIO button
AUX button
ADC
4066
4067
4077
AUX button
AUX button
Tivo
Aiwa
Toshiba
2012
2030
2031
2034
2082
3004
Philips
3002
3044
Apex
3007
3008
3048
3049
Satellite
SAT button
AUX button
RCA
5000
5001
5086
5087
5088
5090
5091
5092
5093
5094
2040
2060
3046
Aiwa
4051
4068
Pioneer
3022
3023
Alphastar
Sharp
2014
2025
2048
2049
Pioneer
5032
5033
Totevision
2010
2011
Broksonic
3009
Archer
5010
5011
5068
Akai
4069
Chaparral
5050
3050
Proscan
3000
3001
Proscan
5002
5003
Unitech
2010
Daewoo
Cableview
5008
5051
Denon
4071
3010
Dishnet
2069
3062
Vector
Research
2006
2007
2012
Emerson
3011
Contec
5016
5067
Emerson
4052
Shintom
2004
2035
2037
2050
5004
Qwestar
3024
Drake
5052
Realistic
5057
RCA
5002
5008
5041
5043
5045
3012
3052
Eastern
5017
Fisher
4053
4074
RCA
3000
3001
3025
3026
3041
3060
3061
3062
5053
Sony
5062
Funai
GE
Echostar
2013
3012
5002
5003
5004
4075
5074
Signature
2069
Star Choice
5085
Video
Concepts
2006
2007
2012
GE
GE
4076
Express Vu
3000
3001
3013
3062
5084
Singer
2018
2037
Realistic
5010
STS1
5058
Gemini
5018
5019
Hitachi
4054
GE
5000
5001
5088
5090
5091
5092
5093
5094
Samsung
5033
STS3
5059
2072
2013
2060
JVC
4055
Go Video
General
Instruments
5004
Sony
2004
2050
2051
2063
2086
Samsung
3027
3039
Scientific
Atlanta
5007
5035
5036
STS4
5060
3040
Wards
2010
2011
2012
2018
2020
2023
2025
2034
2035
2037
2048
2054
2062
2069
2071
Kenwood
4056
4078
Hitachi
Toshiba
5061
5063
5076
5077
5078
5079
5080
5081
3014
Hamlin
5020
5021
5022
5027
Sansui
3032
JVC
3041
4079
5037
Luxman
4080
Sanyo
3043
General
Instruments
5054
Kenwood
STS
2018
2054
Signature
5004
3015
Sharp
3028
3047
5034
Konka
Sprucer
5045
5055
5056
Hitachi
5004
3005
Sylvania
2018
2019
2023
2038
2039
2040
2066
Koss
Standard
Component
5038
Sony
3029
3030
3031
3058
Hitachi
5070
Jerrold
5004
5018
5023
5024
3051
5082
5083
Lasonic
5071
3038
5039
Uniden
5073
Hughes
Network
Systems
5066
Magnavox
3002
Starcom
5018
5046
Sylvania
3012
3059
5040
5046
HDTV
Tuner
3016
XR-1000
2018
2023
Symphonic
2023
Memorex
Stargate
5018
5075
Magnavox
5025
3017
JVC
5069
Toshiba
3033
3034
3035
3036
RCA
5089
7000
Tandy
2008
Mintek
Tocom
5005
5023
2037
Motorola
5047
5048
3018
Yamaha
2006
2007
2008
2015
Panasonic
Tashiko
2011
Mitsubishi
5064
3003
United Cable
5046
5049
Philips
Tatung
2058
NAD
Zenith
3037
3045
5072
Movie Time
5026
3011
Universal
5009
5010
Primestar
Teac
2023
2058
2058
Norcent
5065
NEC
5006
Zenith
2004
2050
2053
2063
3019
Proscan
5000
5011
Onkyo
NSC
5026
Technics
2018
2056
View Star
5016
5025
3020
5001
Oritron
Oak
5016
5028
3024
2072
2081
Teknika
2011
5026
Zenith
5044
Panasonic
5042
5045
Graphics contained within this publication are for representation only.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2:The Remote Control
Marantz
4058
Sherwood
4093
4034
4044
Home
Theatre In
A Box
AUDIO
button
&
AUX button
JBL
Audio 4037
DVD 3053
Audio
Audio
Phono
AUDIO button AUDIO button
AUX button AUX button
GE GE
MCS
4081
Sony
4062
4072
4094
Sherwood
4022
Receiver
Tuner
Mitsubishi
4082
4083
Sony
4014
4015
4003
4050
4004
4006
4047
4048
4049
4043
4003
4005
AUDIO
Teac
4095
4096
4097
RCA
4005
button
AUX button
Aiwa
4008
4009
4010
4019
Nakamichi
4085
4086
Technics
4021
Yamaha
4016
4017
Technics
4063
NEC
4057
JVC
Audio 4038
DVD 3054
Toshiba
4084
Onkyo
4059
4087
Denon
4023
Proscan
4003
4050
4004
4006
4047
4048
4049
4043
Yamaha
4064
4065
Koss
Audio 4035
4036
DVD 3055
4088
Harman
Kardon
4018
Optimus
4089
4090
4098
JBL
4018
4091
Panasonic
4060
JVC
011
Pioneer
4061
4092
4003
Kenwood
012
RCA
4003
4050
4025
4006
4047
4048
4049
4043
4003
4004
Onkyo
4020
Proscan
4007
Optimus
4024
RCA
4007
4073
4100
Panasonic
4021
RCA
4003
4013
4027
4028
4031
Sanyo
4099
Sears
4070
Graphics contained within this publication are for representation only.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Recording, Playback & Features
•
•
•
•
•
•
WatchingTV
DVD Recording (DVD+R and DVD + RW)
Disc Library
DVD Playback
VCR Recording
VCR Playback
Graphics contained within this User’s Guide are for representation only. Some
of the menu screens, buttons, and display messages might be different in your
product than they appear in this book.The on-screen help text provides the
most current operational information.
page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
WatchingTV
Turn on the DVD/VCR to watchTV
1. Turn on theTV, and tune theTV to the correctVideo Input Channel (this channel corresponds to the input jacks on yourTV that you used to connect the DVD/VCR to
theTV).
2. Turn on the DVD/VCR (the DVD/VCR’s main menu appears).
3. Since the WatchTV menu is already highlighted, just press the OK button on the remote (the DVD/VCR tunes to the last station you watched and a channel banner
appears).To see the channel banner after it disappears from the screen, press INFO on the remote control.
The Channel Banner
02:15 pm
Favorite Show
3:00
Ch 9
While watchingTV, press INFO on the remote control to see the channel banner.The information that
appears in the channel banner depends upon the information sent from the broadcaster. For example,
the rating, the program name, and the time the program ends are not always sent by the broadcaster.
Audio: Stereo. (>)
TV-PG
Channel Banner
DVD Recording
00:01:08
•REC
•
0h 30min
Ch 9
00h:54min available
*1
After you load a DVD+R or DVD+RW disc into the DVD/VCR’s disc tray, there are several ways to
record programming.When you insert a blank DVD+R or DVD+RW disc, the DVD/VCR will need
to format the disc so you may need to wait several seconds.The quickest way to start recording is to
press the RECORD button while you’re watching a show (the recording banner appears).You don’t
even need to remember to press the stop button if you use the Express Recording feature in the
recording banner (see next section).
Audio: Stereo. (>)
TV-PG
Recording Banner
Space available on disc
Note:When you stop recording, the DVD/VCR takes several seconds
to save information to the disc.A still frame of the recording may
appear on the screen before you are returned toTV viewing.
DISCSTHATYOU CAN USE FOR RECORDING
DVD+R 2.4x, 4x, 8x, and 16x ONLY; These are write-once discs and can’t be erased.
DVD+RW 2.4x and 4x ONLY.
These are rewritable discs which can be erased and
reused for recording.
IMPORTANT:
Notes:
When you record to a DVD+R disc, you must
finalize it before you can play it in another DVD
player. The DVD recorder automatically asks you
if you want to finalize a disc when it is finished
recording.
This recorder is not compatible with DVD-R or DVD-RW discs for recording. Please make sure to
purchase discs with the plus “+” symbol on the package. Also, it is NOT possible to record on
CD-R or CD-RW discs.
IMPORTANT: It is NOT possible to record content that is copy-protected.This is usually true for
most pre-recorded DVD discs and many pre-recorded VHS tapes.
If you need to finalize a disc later, select the Disc
menu from main menu, then select Finalize Disc and
press OK. Once the disc is finalized you won’t be
able to change the name of the disc or the name of
the titles on the disc.
Notes:
The first time you load a DVD+R or DVD+RW disc, the DVD/VCR will format it.This should only
take a few seconds.
Remember, if you’re using a DVD+R disc you must finalize it if you want to play the disc in
another DVD player (page 35).The DVD recorder automatically asks you if you want to finalize a
disc when it is finished recording.
Express Recording
Please confirm the recording options and
select Start Record to start this recording.
When you press the RECORD button on the remote or on the front of the DVD recorder, the Express
Recording screen appears. Here you can choose the duration of the recording, the quality, and destination
(whether you want to record to tape or disc). For the duration, each time you press RECORD or the right arrow
button, the recording time increases by 30 minutes, up to the maximum limit.The DVD recorder will record for
the amount of time you specified and then stop automatically.At anytime during the recording, you can bring up
the Express Recording screen by pressing RECORD again and then extending the recording time .To cancel the
recording, highlight and select Cancel in the Express Recording screen.
Duration
1h 27 min
Recording Quality
Destination
1 (1h 47 min)
DVD+R/+RW
Cancel
Start Record
Press > to change the recording duration or use the digits to
enter the duration.
Graphics contained within this publication are for representation only.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
Watching one channel while you record another channel (cable with no cable box or off-air antenna only)
If you want to watch another channel while you’re recording, you need to make sure you’ve connected an RF coaxial cable to the CABLE/ANTENNA OUTPUT jack on
DVD/VCR andTV’s corresponding Cable/Antenna Input jack.
1. Make sure the DVD/VCR and theTV are on.Tune theTV to the appropriateVideo Input Channel (if you need help, go to page 19).
2. Using the DVD/VCR’s channel buttons, tune to the program you want to record. Press the RECORD button.
3. If the remote that came with your DVD/VCR operates yourTV, just press theTV button and use the channel up and down buttons to change the channel on theTV.
If the remote doesn’t operate yourTV, use theTV’s remote control to change channels.
4. When you’re finished recording, remember to turn theTV back to itsVideo Input Channel and watchTV through the DVD/VCR.
Notes:
This feature might work differently if you receive programming via a cable box (a different connection may be required. See page 10 for more information). If you
receive programming via a satellite receiver or digital cable box, this feature isn’t available—you can’t record one satellite or digital cable program and watch
another satellite or digital cable program.
The remote that came with your DVD/VCR is a programmable Universal remote that can be programmed to operate many brands and models of TVs. Go to page 22
if you want to program the remote.
When you stop recording, a delay may occur while the DVD/VCR generates information about the recording for the Disc Library.
DVD
/
VCR
/
VIDEO CD
/
CD / MP3 PLAYER DIGITAL VIDEO DISC RECORDER DRC 8300
COPY
STANDBY/ON
RECORD
STOP/EJECT
REV
FWD
PLAY/PAUSE
INPUT
CH-/SKIP-
CH+/SKIP+
OPEN/CLOSE
RECORD
STOP
REV
FWD
PLAY/PAUSE
S-VIDEO
DV IN
L
AUDIO
R
VIDEO
DVD RECORD button
VCR PLAY/PAUSE button
Watching a videocassette tape while you record to disc
1. Start recording on the disc (tune the DVD/VCR to the channel you want to record) and press RECORD).
2. Insert the videocassette tape you want to play after you’ve started recording on your DVD disc.
3. Make sure theTV is tuned to the channel that matches the jacks you used to connect the DVD/VCR to theTV (theTV’sVideo Input Channel).
4. Press theVCR’s PLAY button on the front of the DVD/VCR.
Note:The VCR will use the analog path because the DVD Recording is using the digital path.Therefore, the Info Display won’t be available and the VCR menus will be
different. More information is available in the VCR section of this chapter.
Graphics contained within this publication are for representation only.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
Timer Recordings
Watch TV
Disc
Tape
Setting up timer recordings to record programs automatically
1. From the DVD/VCR’s main menu, use the remote’s arrow buttons to highlight Timers, and press
Disc Library
Timers
Setup
the OK button.
Tip:You can also access the Timers menu by pressing the TIMER•GUIDE button on the remote
control.
2. Since AddTimer is highlighted, just press OK (theTimer Setup screen appears).
3. If you want to give theTimer a name, highlight Name and press the INFO button (the on-screen
keyboard appears—follow the on-screen instructions to name the timer).When finished entering
the name, make sure you press the right arrow button to highlight Done and press OK.
4. Press the down arrow button to highlight the Channel field and use the number buttons on the
Add Timer
Set Transfer
remote to enter the channel number, and press OK (highlight moves to Day).
To enter aVideo Input Channel, press the right arrow button.
5. Use the number buttons to enter month and day.To change the frequency (once, daily, weekly,
etc.), press the right arrow button.When finished, press OK (highlight moves to StartTime).
6. Use the number buttons to enter the time you want to start recording. Press the right arrow
button to change the a.m./p.m. setting.When finished, press OK (the highlight moves to StopTime).
7. Use the number buttons to enter the time you want the DVD/VCR to stop recording. Press the
right arrow button to change a.m./p.m. setting.When finished, press OK (the highlight moves to
Destination).
To set a timer for video recording, press OK.
To exit, press GO BACK/RETURN
8. With Destination highlighted—press the right arrow button to switch between Tape (to record
to theVCR) and Disc (to record to a DVD+R or DVD+RW disc).When finished, press OK (the
highlight moves to Recording Quality).
Timers
Ch 002
Name
Channel
9. You can change the quality of the recording by pressing the right arrow button.The better the
quality, the more space the recording takes up on the disc or tape—(go to page 57 for more
information). Press OK to confirm the quality recording setting.
05/19 19 Mon Once
03:00PM
Day(s)
Start Time
Stop Time
Destination
Recording Quality
Keep Timer
Timer Setup Screen
10. When you’re finished, make sure KeepTimer is highlighted and press OK.
04:00PM
Notes:The DVD/VCR’s clock must be set in order for Timer Recordings to work properly.
Disc
*1 : Best
Setting up timer recordings to transfer a disc to tape or tape to disc
Delete Timer
1. From the DVD/VCR’s main menu, use the remote’s arrow buttons to highlight Timers, and press
the OK button.
2. Press the right arrow button to highlight SetTransfer and press OK (theTransfer Setup screen
appears).
3. If you want to give theTimer a name, press the INFO button when Name is highlighted (the on-
screen keyboard appears—follow the on-screen instructions to name the timer).When finished
entering the name, make sure you press the right arrow button to highlight Done and press OK
(the on-screen keyboard disappears). Press OK again (highlight moves to Copy From /To).
Simon’s birthday
Disc to Tape
03/04 Wed 17
03:00PM
Name
Copy From / To
Day
4. Press the right arrow button to choose whether you want to copy Disc toTape or a Tape to Disc.
Press OK, the highlight moves to Day.
Start Time
Quality
5. Use the number buttons to enter month and day.When finished, press OK (highlight moves to
High
StartTime).
6. Use the number buttons to enter the time you want to start recording. Press the right arrow
button to change the a.m./p.m. setting.When finished, press OK (the highlight moves to Quality).
Keep Timer
Delete Timer
7. To change the quality, press the right arrow button.
Transfer Setup Screen
8. When you’re satisfied with the settings, press the arrow down button to highlight KeepTimer, and
press OK. Make sure the disc is in the disc tray and the tape is in theVCR deck before theTimer
Recording is ready to start.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Chapter 3: Recording, Playback & Features
Disc Library
Live - Ch 6
Watch TV
Disc
You can find a show you recorded to disc more quickly by using the DVD/VCR’s Disc Library. Every time you use
your DVD/VCR to record a program to disc, the DVD/VCR assigns the disc a number, and keeps track of what
you’ve recorded and when you recorded it.The disc’s library stores the following information about each disc:
Disc Name: Maggie
No tape
Tape
4 Library Disc(s)
None scheduled
5:44 pm Mon 7-Jan 2004
Disc Library
Timers
Setup
•
•
•
•
•
•
Disc Name and Number
The number of titles (recordings) on a disc
Recording space available on a disc
Name of the title (show, program, movie)
Date the program was recorded
Which disc is loaded (indicated by a round disc symbol next to the title or disc name)
Finding a title (movie, program, etc) by using the Sort Feature
1. Press MENU (the main menu appears).
Shows you’ve recorded to a DVD+R or DVD+RW disc
are called titles.
2. Press the down arrow button until Disc Library is highlighted, and press OK (a list of titles appears).
3. Press the right arrow button. Each time you press the down arrow button, the next option appears.
Sort byTitle
My Show
When you press OK with Search byTitle highlighted, the on-screen keyboard appears. Enter the first character of
the title you’re trying to find and select Done (the titles starting with that letter appear, with the first in the list
highlighted).
Simon’s Show
My Show
Recorded on:
Disc Name:
Disc Number: 1
Caroline Comics
Sort by Date
Lists contents of the disc by the date recorded.
Sort by Title
Other Sorting Options—Show All Discs
When you choose Show All Discs, additional sorting options appear:
Sort by Space: Lists the discs by the amount of recording space left.
Sort by Disc No.: Lists the discs numerically.
Disc 1
Sort by DiscTitle: Lists discs alphabetically by disc title.
Show AllTitles: Lists all the titles recorded.
Disc Name
Disc Number:
Number of Titles
Available Space 1* Quality
Available Space 6* Quality
Current Quality: 1*
Disc 2
Disc 3
Delete Disc: Deletes the disc that is highlighted and the its contents from the Disc Library, but doesn’t delete
the contents from the disc—the titles are still on the disc.
Erasing the Disc Library
Sort by Space
If you want to erase the Disc Library, you need to reset the unit to the factory default settings. Since this will
erase all of the installation setup information, you need to set up the DVD/VCR again after erasing the Disc
Library (see page 16 for more information).
1. Press and hold the STANDBY/ON button on the front of the unit while pressing and holding the DVD STOP
button at the same time.Wait at least 3 seconds before releasing both buttons.The unit will return to its
factory default settings.
2. Press the MENU button on the remote to bring up the main menu. Highlight and select Setup, and then
select Installation to setup your DVD/VCR again.
Graphics contained within this publication are for representation only.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
DVD Playback
To play recordings, do the following:
1. Turn on theTV and the DVD/VCR.
2. Make sure theTV is tuned to the correctVideo Input Channel (for help, go to page 19).
3. Insert the DVD+R or DVD+RW disc you want to play.
4. Once the DVD/VCR reads the disc’s contents, the main menu appears. If the main menu doesn’t appear, press
Live - Ch 2
MENU (the main menu appears).
Watch TV
Disc
Maggie’s Disc
Notes:
Tape
If you selected Autoplay On in the Disc Options menu (page 57), the disc’s title menu appears
automatically when you insert the disc.
1 Library Disc(s)
Disc Library
Timers
Setup
If the screen is blank, you might not have your TV tuned to the correct Video Input Channel. For more
information about Video Input Channels, go to page 19.
10:49 am Thu 17-Mar 2003
5. Use the up and down arrow buttons on the remote to highlight the DiscTitle Menu, and press OK (the
options appear).
6. There are two ways to access your recordings within these menu options:
Play Disc: If you want to play all of the recordings on the disc (or there is only one recording), just press OK
when this menu is highlighted (the first recording plays).
Play Disc
Watch TV
Disc
Tape
Disc Library
Timers
Setup
DiscTitle Menu: Press OK when this menu option is highlighted (all of the recordings/titles on the disc
appear). Use the arrow buttons to highlight the title you want to select:
Disc Title Menu
Playlist
•
•
To watch the program that you’ve highlighted, press PLAY.
Copy Disc
Disc Actions
If you want to name the program, delete it, or change the play mode, press OK (the options appear).
RenameTitle: For DVD+RW discs or DVD+R discs which have not been finalized.
PlayTitle: Plays the movie, program or show.
Play All Chapters: Plays all chapters, including chapters that may have been hidden when editing the disc.
DeleteTitle: For DVD+RW discs only.
Note:You can delete a title from a DVD+R disc that hasn’t been finalized but the program will
still be on the disc.You will not be able to access the program once the title has been deleted.
Clear Chapters: For DVD+RW discs only.
1- Disc name
Maggie’s Disc
Caroline’s Bday
Simon at soccer
5- Disc information: Name
2-Titles on the disc (programs
you recorded)
Maggie’s Disc
6 Title(s) on Disc
0h 24min available
*1 Best
Anniversary
of disc, how many recordings
are on the disc; how much
recording time is left on the
disc; the Recording Quality
setting.
Steve’s vacation
Steve & Maggie
3- Information bar: shows how much space individual titles are taking up on the disc.
For example: the first bar represents the title Caroline’s Bday; the longest recording
(title) is the third one, entitled Anniversary.
4- shows how much recording
space is left on the disc
Graphics contained within this publication are for representation only.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
1- Disc name
Disc Information
In addition to providing information about individual titles on the disc, the DiscTitle Menu gives you helpful
information about the disc itself.After you’ve inserted the DVD+RW disc or DVD+R disc, select Disc from main
menu, highlight DiscTitle Menu and press OK.
Maggie’s Disc
Caroline’s Bday
Simon at soc-
Anniversary
The picture above is an example of what you’ll see (details are on the next page).
The top menu bar is the name of the disc.With the disc name highlighted, press OK and the options described
below appear:
Maggie’s Disc
6 Title(s) on Disc
0h 24min available
*1 Best
Note:You cannot select the disc name for a finalized DVD+R disc.
Steve’s vacation
Steve & Maggie
Rename Disc: Press OK when highlighted.A confirmation screen appears, asking if you want to rename.
Highlight and select Yes.An on-screen keyboard appears so you can change the name of the disc (1 on illustration
above left).
Erase Disc: DVD+RW discs only. Erases a DVD+RW disc so you can record new programming onto it (not
available for DVD+R disc).
Lock Disc: DVD+RW discs only. Protects contents of the DVD so nobody can record new programming onto it.
If the disc has been locked, the menu option changes to Unlock Disc (not available for DVD+R discs).
Finalize Disc: DVD+R only. Enables a DVD+R disc to be played in other DVD players. Not available if the disc
has already been finalized.After a disc is finalized, you can’t record more programs to the disc.
Rename Disc
Erase Disc
Make Compatible: DVD+RW discs only. If you have made edits to the disc (described in the next section), such
as adding or deleting chapter markers or hiding chapters, this option enables the edited version of the disc to be
compatible with other DVD players.
Lock Disc
Finalize Disc
Make Compatible
Maggie’s Disc
6 Title(s) on Disc
0h 24min available
*1 Best
If you press OK when a title is highlighted, the following options appear:
RenameTitle: Press OK when highlighted.A confirmation screen appears, asking if you want to rename.
Highlight and select Yes.An on-screen keyboard appears. Follow the on-screen instructions to give the disc a
different name. Highlight Done when you’re finished, and press OK.
PlayTitle: Press OK when highlighted to play the title.
Play All Chapters: Press OK when highlighted to play a title which has been edited by hiding chapters if you
want to play the title in its entirety (even the hidden chapters).
Caroline’s Bday
Rename Title
Play Title
DeleteTitle: Press OK when highlighted to delete the title. Follow the on-screen instructions on the
confirmation screen to delete the title. (Not available for finalized DVD+R discs.) If you delete a title from a non-
finalized DVD+R disc, the information will still be on the disc but the title will be erased so there won’t be any
way to access the title.
Play All Chapters
Delete Title
Maggie’s Disc
6 Title(s) on Disc
0h 24min available
*1 Best
Clear Chapters: When you highlight this option and press OK, all chapter markers are erased. (Not available
for DVD+R discs).
Clear Chapters
Graphics contained within this publication are for representation only.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
Editing DVD+R and DVD+RW discs
While playing the disc, press the INFO button on the remote (the Info Display appears). Details
about the different icons appear in Chapter 4: Playing Discs. However, the edit feature includes special
options for DVD+RW discs.
The Edit icon
1. While playing a disc, press the INFO button.
2. Press the right arrow button to highlight the Edit icon
, and press OK.The following choices
appear (use the up/down arrow buttons to highlight a choice and press OK to select).
•
•
Insert Chapter Marker (DVD+RW discs only).When you’re recording to a disc, the DVD
Recorder adds chapter markers according to how you have them set up in the Setup Menu
(off, 5 minutes, or 10 minutes).Additionally, you can insert chapter markers manually to
segment different parts of the title.To insert a chapter marker, simply highlight Insert Chapter
Marker during playback at the point where you want the chapter to start.
Insert Chapter Marker
Delete Chapter Marker
Hide Chapter
Delete Chapter Marker (DVD+RW discs only). Since the DVD/VCR adds chapter markers
according to how you have them set up in the Setup Menu, you may want to make each
chapter longer by deleting a chapter marker during playback.
New Title Frame
•
•
Hide Chapter (DVD+RW discs only). During playback you can hide a specific chapter so it
is automatically skipped. For more information, see below.
NewTitle Frame You can change the thumbnail image that appears in the Player Menu
(described in the next section).When the video appears that you want to use to visually
represent the title, press OK (the next time you access the Player Menu a still image of this
video will appear).
EditingTitles with the Hide Chapter Feature
Rename Title
As with most editing features on recorded discs, Hide Chapter is only available with DVD+RW discs.
You have to Insert a Chapter Marker at the beginning and the end of the part of the recording you
want to “hide.”
Play Title
Play All Chapters
Delete Title
Note: Since the DVD/VCR adds chapter markers according to how you have them set up
in the Setup Menu, it might be a good idea to Clear All Chapter Markers before using the
Hide Chapter feature.To find the Clear Chapters option, go to the Disc menu and select Disc
Title Menu. Highlight the title you want to clear chapters from, and press OK. Highlight Clear
Chapters, and press OK.
Simon’s 4th Birthday
Fri, 6/20/2003
03:00 pm – 04:00 pm
*1 Best
Clear Chapters
1. While playing the recording (called a title), press INFO (the Info Display appears).
2. Press right arrow until the Edit icon
is highlighted, and press OK.
3. When you’re at the beginning of the place you want to hide, press PAUSE.Then, highlight Insert
Chapter Marker (if the Info Display isn’t on the screen, press INFO and select the Edit icon
).
4. Use PLAY, FAST FORWARD, or ADVANCE to go to the end of the segment that you want to hide,
and select Insert Chapter Marker again.
Insert Chapter Marker
5. To “hide the chapter” you must be playing it.Therefore, press REVERSE or AGAIN until playback
is between the two chapter markers you just inserted. If the Info Display isn’t on the screen, press
INFO, select the Edit icon, and select Hide Chapter (each time the title plays this chapter will be
automatically skipped).
Delete Chapter Marker
Hide Chapter
New Title Frame
6. To “undo” the Hide Chapter feature for normal playback, go to the DiscTitle Menu and select Play
All Chapters.
Graphics contained within this publication are for representation only.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
ON-OFF
VCR Basics
TV
TheVCR part of your DVD/VCR has all the basic functions of otherVCRs.The basic concepts are
explained below and the advancedVCR features are explained on page 38.
DVD/VCR CABLE
SAT
AUX
AUDIO
Basic Playback
ZOOM EDIT
OPEN ANGLE
CLOSE
1. Tune theTV to your DVD/VCR viewing channel (03, 04, or theVideo Input Channel).
2. Insert a tape in the DVD/VCR.
TIMER•GUIDE INFO
MENU
CLEAR
3. Press PLAY to play the tape.
OK
AGAIN
ADVANCE
Note: If both a DVD disc and VCR tape are in the DVD/VCR, the DVD disc plays automatically
when you press PLAY.To play a tape, go to the main menu (press MENU), select Tape, and press
PLAY to start playing the tape.
LIVE
VOL
CH
MUTE
1
GO
•
•
Press FORWARD or REVERSE to cue the tape to the desired position during Play mode.
BACK
2
3
6
9
To advance the tape approximately 30 seconds at a time during Play mode, press the ADVANCE
button on the remote control.
4
5
8
•
•
To go back approximately 10 seconds during play mode, press the AGAIN button.
7
Press PAUSE to stop action. For slow-motion playback, press FORWARD (while picture is paused).
To move one frame at a time, press PAUSE on the remote (while paused)—each time you press
PAUSE, the video moves forward one frame.
INPUT
0
ANTENNA
REVERSE PLAY FORWARD
•
•
Press the CH +/CH- buttons to remove any streaks from the picture, if necessary.
Press STOP to stop playback.
RECORD
STOP
PAUSE
Tape Eject
Press the STOP/EJECT button on the DVD/VCR when stopped to eject the tape.You can also press
the OPEN•CLOSE button on the remote control to eject the tape.
Basic Recording
1. If necessary, change the tape speed (SP or SLP) in Recording Options menu (page 57).
2. If you’re watchingTV, press the RECORD button on the front of the DVD/VCR (theVCR’s
RECORD button that is next to the STANDBY/ON button turns on) to begin recording.
3. Press the STOP button to halt recording.
If you just want to pause the recording for a short time (like during a commercial), press PAUSE
instead of STOP.To resume recording, press the RECORD button on the remote control.
Check the SafetyTab
Make sure there is a tape in the DVD/VCR with its safety tab in place.You cannot record on a tape if
the safety tab has been removed. If the safety tab is removed and you want to record, simply cover the
hole with adhesive tape.
SafetyTab
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Chapter 3: Recording, Playback & Features
ON-OFF
AdvancedVCR Features
TV
TheVCR portion of your DVD/VCR combo works like mostVCRs, but has some additional features
DVD/VCR CABLE
for playback and copying tapes to disc.These additionalVCR features provide you with all kinds of neat
features that mimic a DVD, including adding A-B edit points and search modes.
SAT
AUX
AUDIO
Note:These advanced features are not available when playing tapes and recording DVD discs at
the same time.
ZOOM EDIT
OPEN ANGLE
CLOSE
TIMER•GUIDE INFO
INFO button
MENU
CLEAR
Advanced Playback
EDIT button
OK
1. Insert a tape.
AGAIN
ADVANCE
2. Press PLAY.
LIVE
3. Press INFO on the remote control (if the Info Display doesn’t appear, press EDIT first).
VOL
CH
MUTE
1
GO
4. With the Info Display on the screen, use the left/right arrow buttons on the remote to highlight
BACK
different icons to access theVCR playback features.
2
3
6
9
4
5
8
7
INPUT
0
ANTENNA
REVERSE PLAY FORWARD
RECORD
STOP
PAUSE
PLAY button
Time
Display
Playback
indicator
Reset Counter
Zero Search
Index Search
A-B Edit
Play Mode:
Standard or Channel
A-B Repeat
Audio
VCR Info Display (except during simultaneous disc recording)
Above, the time display shows the amount of time that has elapsed on the tape. Below the time display
is the play indicator that tells you the state of playback (play, pause, stop, etc.).
Note:These items are for display only—you cannot adjust or change them.
Reset Counter: Sets the 0 point, which means the elapsed time in theTimer Display starts from the
point when you press OK with the Reset Counter icon highlighted.
Insert A Point
Zero Search: Fast forwards or rewinds the tape to the point that you selected as the 0 point
(above).
Cancel Last Edit
Delete A-B Edits
Review A-B Edits
Save Edits & Text
Index Search: Each time you press RECORD on theVCR, the tape records an index mark. Use Index
Search to quickly find the beginning of a program.With the Index Search icon highlighted, you can
quickly go back or go forward to the next index point. Press FORWARD to go to the next Index
Mark, press REVERSE to go to the previous Index mark.TheTape menu will be displayed while the
DVD/VCR searches for the next Index Mark.
A-B Edit: This feature was designed so that you can copy your videotape collection of home movies
to DVD discs in separate segments so the events appear as separate titles on the DVD disc. For
example, you might have your wedding; a birthday party; and your family reunion on a tape from
your camcorder recordings. If you set up A-B Edits, these events will appear as separate titles on
the DVD disc.With the AB Edit icon highlighted, press OK (the options appear on the screen).
A and B Edit Points
Save Edits and Exit
A1: 00:01:33
B1: 00:02:00
B2: 00:02:35
B3: Empty
Insert A point/Insert B point: Press OK to mark the beginning or the end of an A-B segment
of the tape.
A2: 00:01:00
Cancel Last Edit: Cancels the last action.
A3: Empty
Delete A-B Edits: Clears all A-B segments.
A4:EmptyB4: Empty
A5:EmptyB5: Empty
Review/Play A-B Edits: Displays A-B edits, and allows you to start playing A-B Edits.
Save Edits & Exit: Saves the A-B segments.
Play Mode and A-B Repeat: Changes the play mode to standard or A-B Repeat.
Audio Channel: Changes the audio to one of the following: Stereo surround, Left channel only, Right
channel only, or mono.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Chapter 3: Recording, Playback & Features
VCR Recording
After you put a videocassette tape in theVCR deck, there are several ways to record programming.The quickest way to start recording is to press the RECORD button (on
the front of the DVD/VCR next to the STANDBY/ON button) while you’re watching a show.
When you press theVCR REC button on the front of the DVD/VCR, the Express Record screen appears. If you press REC again, theVCR starts recording and accepts the
default length, quality, and destination set on the screen. If you want to make changes, use the remote to change the settings before pressing REC.
Note:The DVD/VCR supports Macrovision and won’t record copy-protected material.
Express Recording
When you press the RECORD button on the remote or on the front of the DVD recorder, the Express Recording screen appears. Here you can choose the duration of
the recording, the quality, and destination, or whether you want to record to tape or disc. For the duration, each time you press RECORD or the right arrow button, the
recording time increases by 30 minutes, up to the maximum limit.The DVD recorder will record for the amount of time you specified and then stop automatically.At anytime
during the recording, you can bring up the Express Recording screen by pressing RECORD again and then extending the recording time .To cancel the recording, highlight
and select Cancel in the Express Recording screen.
Watching one channel while you record another channel (cable with no cable box or antenna only)
If you want to watch another channel while you’re recording, you need to make sure you’ve connected the DVD/VCR to theTV properly (both audio/video cables and an RF
coaxial cable need to be connected):
1. Make sure the DVD/VCR and theTV are on.Tune theTV to the appropriateVideo Input Channel (if you need help, go to page 19).
2. Put a tape with its safety tab intact into theVCR deck.
3. Using the DVD/VCR’s channel buttons, tune to the program you want to record. Press the RECORD button.
4. If the remote that came with your DVD/VCR operates yourTV, just press theTV button and use the channel up and down buttons to go to a different channel.
If the remote doesn’t operate yourTV, use theTV’s remote control to change channels.
If you don’t see a picture on theTV or the picture looks fuzzy (“noisy”), press the ANTENNA button on the remote control.
5. When you’re finished recording, remember to turn theTV back to itsVideo Input Channel and watchTV through the DVD/VCR.
Notes:
This feature might work differently if you receive programming via a cable box. If you receive programming via satellite receiver or digital cable, this feature isn’t
available—you can’t record one satellite or digital cable program and watch another satellite or digital cable program.
The remote that came with your DVD/VCR is a programmable Universal remote that can be programmed to operate many brands and models of TVs. Go to page 22
if you want to program the remote.
Recording to tape while you watch a DVD disc
1. Make sure the DVD/VCR and theTV are on.Tune theTV to the appropriateVideo Input Channel (if you need help, go to page 19).
2. Put a tape with its safety tab intact into theVCR deck.
3. Using the DVD/VCR’s channel buttons, tune to the program you want to record. Press the RECORD button.
4. Put the DVD disc into the disc tray, and close it.
5. Press PLAY to start playing the DVD disc.
Notes: While playing the disc, you can’t check the Info Display for the VCR recording.You need to stop the disc playback and select WATCHTV from the Main menu
to see the VCR Info Display.
Timer Recordings
Go to page 32 for instructions to set upTimer Recordings (both AddTimer and SetTransfer).
Graphics contained within this publication are for representation only.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
DVD
/
VCR
/
VIDEO CD
/
CD / MP3 PLAYER DIGITAL VIDEO DISC RECORDER DRC 8300
Copying a videocassette tape to a DVD disc (DVD+R or DVD+RW)
COPY
When you press the COPY button on the front of the DVD recorder or access CopyTape through the Disc
menu, the Copy screen appears. Here you can choose the destination (Tape to Disc), the quality, and the copy
mode.The DVD recorder will record for the amount of time you specified for the Copy Mode setting (A-B
edits only or current point) and then stops automatically.
STANDBY/ON
RECORD
STOP/EJECT
REV
FWD
PLAY/PAUSE
INPUT
CH-/SKIP-
CH+/SKIP+
OPEN/CLOSE
RECORD
STOP
REV
FWD
PLAY/PAUSE
S-VIDEO
DV IN
L
AUDIO
R
VIDEO
COPY button
1. Put a DVD+R or DVD+RW disc into the disc tray (if it’s a blank disc, you’ll need to wait for the DVD/
VCR to initialize the disc).
If you set up A-B Edits (page 38), only the A-B Edits will be
recorded to disc when you use the COPY button on the
front of the DVD/VCR.
2. Put the videocassette tape you want to transfer to disc into theVCR deck and make sure it’s cued up or
rewound to the beginning.
3. Press the COPY button on the front of the DVD/VCR (the Copy screen appears).
4. Use the arrows buttons and OK to change the desired settings.When finished, highlight Start Copy and
press OK (the DVD/VCR starts recording the tape to the disc automatically).
To copy contents between a tape and
a disc, confirm the settings below, and
select Start Copy.
If you don’t want to record the tape onto disc, press the down arrow button to highlight Cancel and press
OK.
Copy From / To
Quality
Tape to disc
To watchTV while the tape is copying to disc, you’ll need to change channels on theTV because the
DVD/VCR is conducting two functions—playback of the tape and recording onto a DVD.
*1 (oh 47 min)
A-B Edits Only
Copy Mode
Note:You can’t copy pre-recorded videocassette tapes that are encrypted with Macrovision software.
Cancel
Start Copy
This is where two lines of context sensitive help will
appear.
Copying a DVD disc (DVD+R or DVD+RW) to a videocassette tape
Play Disc
Watch TV
Disc
Tape
When you access Copy Disc through the Disc menu, the Copy screen appears. Here you can choose the
destination (Disc toTape), the tape speed, and the copy mode.The DVD recorder will record for the amount
of time you specified for the Copy Mode setting (playlist or entire disc) and then stop automatically.
Disc Title Menu
Playlist
1. Put a DVD+R or DVD+RW disc into the disc tray.
Disc Library
Copy Disc
Timers
Disc Actions
2. Put a blank videocassette tape into theVCR deck.
Setup
3. If the main menu isn’t on the screen, press MENU.
4. Press the down arrow button until the Disc menu is highlighted, and press OK.
5. Press the down arrow button until Copy Disc is highlighted, and press OK (the Copy screen appears).
6. Use the arrows buttons and OK to change the desired settings.When finished, highlight Start Copy and
press OK (the DVD/VCR starts playing the disc and recording the disc to the videotape automatically).
All the titles on the disc will be copied.
If you don’t want to record the disc onto the videocassette tape, press the down arrow button to
highlight Cancel and press OK.
Play Disc
Watch TV
Disc
Tape
Disc Library
Timers
Setup
Disc Title Menu
Playlist
If you only want to copy a specific title or a specific chapter, you can create a playlist (go to page 54 for
instructions).
Copy Disc
Disc Actions
Notes:
You can’t copy pre-recorded DVDs that are copy-protected. Most movies on DVD discs are copy-
protected.
If you set up a playlist on the DVD disc, only the content of the playlist will be copied.To copy the
entire disc, you’ll need to delete the playlist first.
You can also copy a disc to tape via the Timers menu by setting up a Transfer Timer (for more
information, go to page 32).
To copy contents between a tape and
a disc, confirm the settings below, and
select Start Copy.
Copy From / To
Tape Speed
Copy Mode
Disc to tape
SP
Entire disc
Cancel
Start Copy
This is where two lines of context sensitive help will
appear.
Graphics contained within this publication are for representation only.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Recording, Playback & Features
Copying a digital video camcorder tape to a DVD disc
Watch TV
Disc
Tape
Live - Ch 2
Your DVD/VCR enables you to view and/or copy pictures and sound from a digital video camcorder connected
to the DV IN jack on the front of the unit.With some camcorders, your DVD/VCR may control some functions
of the camcorder via this connection.
No Disc
No Tape
Note: DV-CAM only appears in the main menu when a digital video camcorder is connected to the DV IN
jack on the front of the unit and turned on.
1 Library Disc(s)
Disc Library
Timers
Setup
10:49 am Thu 17-Mar 2003
1. Put a DVD+R or DVD+RW disc into the disc tray (if it’s a blank disc, you’ll need to wait for the DVD/VCR
to initialize the disc).
Jpeg Picture Card
DV-CAM
2. Put the DV tape you want to transfer to disc into the camcorder and make sure it’s cued up or rewound to
To watch TV, press OK.
the beginning.
3. Connect the camcorder to the DV IN jack on the front of the unit and turn it on.Then press PLAY on the
Keep in mind, the DV-CAM feature only appears in
the main menu when a digital video camcorder is
connected to the DVD/VCR.
camcorder.
4. From the DVD/VCR’s main menu, select DV-CAM and press OK (the pictures and sound from the
camcorder are displayed on theTV).
5. Press RECORD on the remote control or on the front of the unit to begin recording.
•
•
To pause recording, press PAUSE.
To stop recording, press STOP.
When finished copying, the DVD/VCR’s main menu appears.
Notes:
•
•
The Disc Library does not take image and sound files into account for its information.
You can also copy image and sound files to a DVD+RW disc that has been previously recorded to.
Graphics contained within this publication are for representation only.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Playing Discs
•
•
•
•
•
•
•
Regional Coding
Types of DiscsYou Can Play
How to Load and Play Discs
Using the Different Menus
Search Options
Playback Options
Using the On-screen Info Display
Graphics contained within this User’s Guide are for representation only. Some
of the menu screens, buttons, and display messages might be different in your
product than they appear in this book.The on-screen help text provides the
most current operational information.
page 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
Regional Coding
Both the DVD/VCR and the discs are coded by region.These regional codes must match in order
for a pre-recorded DVD to play.This player’s code is region 1. However, discs you use for recording
(DVD+R and DVD+RW) aren’t assigned region numbers.
Types of discs you can play
•
•
•
DVD+R and DVD+RW discs – used to record programming. Instructions about playing and
recording these discs are in Chapter 3.
DVD+Rewritable
DVD+R
DVDVideo discs – contain picture and sound [DVD-R, DVD-RW (video mode only), DVD+R,
DVD+RW, and DVD ROM are compatible with this player]. DVD-R discs must be finalized.
CDs (CD-R, CD-RW) – Audio CDs contain musical or sound content only. mp3 discs are
CDs that contain mp3 files.This player is also capable of playing CDs that contain JPEG files, and
Multisession CDs.
•
Video CD discs – Like DVD video discs,VCDs contain picture and sound content.The difference
is the amount of information that can be stored on the disc.VCDs typically have lower picture and
sound quality than DVD discs.
Note: Some discs may not be compatible due to
laser pickup and design.
You can’t record on the following types of discs: CD-R, CD-RW, DVD-R, DVD-RW, or DVD-RAM.
You can’t play the following types of discs:, Laserdiscs, CD-I, CD-ROM (computer only
discs), discs recorded using other broadcast standards (i.e. PAL or SECAM), or DVD-RAM
discs.
Note: Some discs may not be compatible due to laser pickup and disc design.
t
'
a
a
t
t
c
c
a
Ca
h
h
C
U
U
p
p
How to Load and Play Discs
This is an example of a one-
sided disc.
Turn on theTV and your DVD/VCR (press ON•OFF on the remote or press the STANDBY/ON
button on the DVD/VCR).
1. Make sure theTV is tuned to itsVideo Input channel (if you need more information, go to
page 19).
2. Press the OPEN/CLOSE button (the disc tray opens).
3. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on
both sides, so you can place either side up).
4. Press the OPEN/CLOSE or PLAY button.The disc tray closes.The DVD/VCR reads the disc’s table
of contents, and then one of three things happens depending on how the disc was programmed:
•
•
The disc starts playing.
This is an example of a two-
sided disc—the title is
usually in the center of the
disc.
The DVD’s disc menu appears on the screen. One of the options will start disc play. Highlight
that option and press OK.
•
The DVD/VCR’s main menu appears on the screen. Highlight the Disc menu and press PLAY.
Note: If you don’t see a picture, press STOP (the main menu appears), and check the position of
the PROG SCAN switch on the back of the unit. Make sure the PROG SCAN switch is in the OFF
position.Try playing the disc again.
Tip
The only time the PROG SCAN switch should be in the ON position is if you connected this unit
to a progressive scan TV via Y, Pb, Pr COMPONENT jacks.
When you stop playing a disc, the player
remembers where you stopped.When you
start playing the disc again, the DVD/VCR
picks up where you left off unless the disc is
removed or the player is unplugged, or you
press the STOP button twice.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Chapter 4: Playing Discs
Using Different Menus
Each disc is programmed with different features.There are three separate types of menus that you can
use to access features:
•
The DVD’s Disc menu – The Disc menu is part of each disc and is separate from the DVD/
VCR’s menu.The contents of each Disc menu vary according to how the disc was authored and
what features are included.
To make the Disc menu appear, press the MENU button while the disc is playing.
•
•
The DVD/VCR’s Info Display –The Info Display appears as icons across the top of the screen
when a disc is playing. It can only be accessed while you are playing a disc. It’s turned on and off
with the INFO button on the remote.The Info Display icons change based on the type of disc
you’re playing. Go to page 45 for more information.
The DVD/VCR menu – If you’re playing a disc, press STOP (the DVD/VCR’s menu appears
automatically).
Remember:A feature will only work if the disc was programmed with that feature. For
example, if you choose subtitles on the Info Display, the subtitles will only appear if the disc
was created with subtitles. If a menu or icon is “grayed out” it means that item (or feature)
isn’t available.
Live - Ch 2
Watch TV
Disc
Tape
Disc Library
No Disc
Recordable
0 Discs
10:49 am Thu 17-Mar 2005
Timers
Setup
To watch TV, press OK.
Search Options
Picture Scan
To search a disc during playback, use the FORWARD or REVERSE button. Each time you press
FORWARD or REVERSE, your DVD/VCR scans the disc faster until you reach the fastest scan speed.
To resume normal playback, press PLAY.
ON-OFF
TV
Note: Many DVD titles are programmed to prohibit skipping of warnings or credits in the
beginning so that you can’t fast forward through them.
DVD/VCR CABLE
SAT
AUX
AUDIO
Freeze Frame and Frame Advance
While a disc is playing, press PAUSE to freeze the picture.To advance one frame at a time, press
PAUSE again (the on-screen icon changes from PAUSE to FRAME). Each time you press the FORWARD
button, the picture goes to the next frame.To resume normal playback, press PLAY.
ZOOM
button
ZOOM EDIT
ANGLE
OPEN
CLOSE
TIMER•GUIDE INFO
MENU
Slow Motion (in Freeze Frame Mode) – DVD discs only
CLEAR
While a disc is playing, press PAUSE. Press REVERSE or FORWARD (each time you press REVERSE or
FORWARD the slow motion will get a little faster until you reach the fastest slow motion speed).To
resume normal playback, press PLAY.
OK
AGAIN
ADVANCE
Time Search – DVD andVCD discs only
Make sure theTime Display (top left side of the Info Display) is highlighted, and then use the number
buttons to enter a specific time on the disc that is playing. Go to page 46 for more information about
theTime Display.
AGAIN
button
ADVANCE
button
LIVE
VOL
CH
MUTE
1
GO
BACK
Quick Fast Forward and Quick Reverse – DVD and Audio CD only
2
3
6
9
While you’re playing a disc, press the AGAIN button on the remote (the disc automatically repeats the
last 10 seconds of the movie).
4
5
8
Similarly, press the ADVANCE button to go forward approximately 30 seconds.
7
Playback options
INPUT
0
ANTENNA
Many of your DVD/VCR’s playback features are accessed through the Info Display (described on pages
45-49).Additionally, with some discs you can use the Zoom Feature to see details of an image.
REVERSE PLAY FORWARD
REVERSE
button
FORWARD
button
Zoom
RECORD
STOP
PAUSE
1. While you’re playing a disc, press ZOOM (the player zooms in on the image). Each time you press
PAUSE button
ZOOM, the picture is magnified even more (until you get to the maximum zoom level).
2. To see other parts of the picture when you’ve zoomed in on the image, press the up, down, left,
and/or right arrow buttons to go in corresponding directions.
Graphics contained within this publication are for representation only.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
Using the On-screen Info Display
The on-screen Info Display contains many playback features.To see the Info Display, press the INFO button on the remote while a disc is playing (the Info Display appears
across the top of the screen). Each feature is illustrated with an icon. Use the left and right arrow buttons to move through the different icons in the Info Display.When an
icon is highlighted, use the up and down arrow buttons on the remote to scroll through the choices.
Remember, you can only access the Info Display when you’re playing a disc (or when playing a videotape via the digital path).Also, the Info Display features are only available
if the disc was created with that particular feature (i.e., if you select the Angle icon, you won’t be able to change the camera angle unless the disc was created with different
camera angles). If one of the icons is “grayed out,” the Info Display feature isn’t available for the disc you’re playing.
The invalid symbol appears on the screen when you press a button that doesn’t have any function.To make the Info Display disappear from the screen, press INFO
on the remote control.
Time display (page 46)
Chapter (page 46)
Audio (page 47)
Angle (page 48)
Title (page 46)
Subtitles (page 46)
Repeat (page 47)
Text will appear here as you highlight different icons to help you use the Info Display.
This is the Info Display you’ll see when you’re playing a pre-recorded DVD disc.To make the
Info Display appear, press the INFO button on the remote control. Use the left and right arrow
buttons to highlight different icons. Use the up and down arrow buttons to scroll through the
choices available.
Track
(page 46)
Time display
(page 46)
Play Mode
(page 48)
Repeat
(page 47)
IntroScan
(page 49)
This is the Info Display you’ll see when you’re playing an audio CD.
Time display
(page 46)
Track
(page 46)
PlayBack Control
(page 49)
Audio
(page 47)
Repeat
(page 47)
This is the Info Display you’ll see when you’re playing aVideo CD, also called a
VCD.
DVD+R and DVD+RW Info
Display… go to page 46.
DVD+Rewritable
DVD+R
VCR Info Display… go to
page 38.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Chapter 4: Playing Discs
JPEG Info Display… go to page 50.
01
Time Display (DVD,Video CD, and Audio CD)
This feature displays the time that has elapsed during playback. For DVD discs, the time displayed refers to the current title and acts as a
Time Search feature. For example, if you like a particular scene in a movie, you can enter the elapsed time the scene plays and skip right
to it.
Hour
Seconds
Minutes
1. Highlight theTime Display and use the number buttons on the remote to enter the elapsed time you want to go to in that title.You
must use two digits for each field. For example, if you enter 01:35:12, playback will start one hour, 35 minutes, and 12 seconds into
the title.
Notes:
For Audio CDs, the time displayed refers to the track that’s playing.
Some portions of a disc might prohibit searching or scanning, such as warnings or opening credits.
Selecting aTitle on DVDs or aTrack on Audio CDs orVideo CDs
Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title).
Each title is divided into chapters.
To select a title via the Info Display, highlight theTitle icon with the right arrow button on the remote control. Press the up or down
arrow button to go to the next title:When you’re playing aVCD or an Audio CD, use these instructions to go to a differentTrack.
Notes:
You can also use the number buttons on the remote to enter the title/track number.
Many discs only have one title.
Some DVD movies don’t allow you to select titles from the Info Display.You must use the DVD’s disc menu.
Chapter Icon (DVD)
Because DVD discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD).You can skip to a
specific chapter by using the Chapter feature in the Info Display.
1. While a disc is playing, press INFO on the remote (the Info Display appears).
2. Press the right arrow button until the chapter icon is highlighted.
3. Press the up and/or down arrow buttons to go to different chapters.
Notes:
You can also use the number button(s) on the remote to enter the chapter you want to play—you may need to enter 2 digits,
depending on the number of chapter there are on the disc (for example, if there are 14 chapters, to go to chapter 4, press 0 and
then press 4).The movie starts playing at the beginning of the chapter you entered.
Shortcut
While you’re playing a
disc, you can use the
CH +/ CH– buttons to
go to the next chapter
or previous chapter.
The Chapter feature won’t work if the disc isn’t formatted with separate chapters.
When you’re recording onto DVD+R and DVD+RW discs, chapter markers are added according to how you have them
set up in the Setup Menu (off, 5 minutes, or 10 minutes). See page 36 for more information about chapter markers.
Subtitle Icon (DVD)
To change the subtitle language, highlight the subtitle icon and press the up or down arrow buttons to scroll through the choices (the
subtitle language options appear in the box at the bottom of the Info Display).
Notes:
Changing the subtitle language with the Info Display will only affect the disc you are currently playing. When the disc is removed
or the player is turned off, the subtitle language will revert to the language setting specified through the DVD/VCR’s Language
menu.
If the disc doesn’t contain the language you want to use, the disc’s default language is automatically selected.
Some discs are programmed to only allow you to access the subtitle feature through the disc’s menu. If changing subtitle
language via the Info Display doesn’t work (as described above), press MENU and change the subtitle language via the disc’s
menu.
Graphics contained within this publication are for representation only.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
Repeat Icon (DVD,Video CD, and Audio CD)
By default, the Repeat feature is Off.There are four Repeat options:
•
•
•
•
Chapter – repeats the chapter that is playing (track for CD orVCD).
Title – repeats the title that is playing
Disc – repeats the disc that is playing
A-B – repeats a segment of the disc that you select.
For DVD discs andVCDs, play modes are also available from the Repeat Icon:
DVD andVCDs: Standard – plays the disc chapters in the order they were placed on the disc.
DVD: Playlist – plays a playlist you create in the menu system (page 54).
RepeatingTitles, Chapters, orTracks
1. While a disc is playing, press INFO (the Info Display appears).
2. Press the right arrow button until the Repeat icon is highlighted.
3. Press the up or down arrow button to scroll through the different Repeat options—Repeat title, Repeat disc, Repeat chapter (track),
Repeat AB, and Repeat Standard (the modes appear at the bottom of the Info Display).
4. To turn off the Repeat feature, press the up or down arrow button repeatedly until Play Mode: Standard appears.
AB Repeat
AB Repeat lets you define a specific segment on the disc that you want to repeat. For example, you might want to watch a specific scene
from a movie repeatedly:
1. Follow steps 1 and 2 above.
2. Press the up (or down) arrow button until “Repeat Mode: AB. Press OK to set A point” appears at the bottom of the Info Display. Press
OK when the disc gets to the beginning point of the segment (the A point) that you want to repeat.
3. Go to the end of the segment you want to repeat. Press OK to set the B point (the segment you marked will play repeatedly until
you turn off the Repeat feature).
4. To turn off the Repeat feature, highlight the Repeat icon, and press the up arrow button on the remote until Play Mode: Standard
appears at the bottom of the Info Display.
Audio Icon (DVD andVideo CD)
If the disc was created with different language tracks (recorded in different languages) or different audio formats (Dolby, DTS, stereo,
etc.), you can change the audio option while you’re playing the disc.
1. While a disc is playing, press INFO (the info display appears).
2. Press the right arrow button until the Audio icon is highlighted.
3. Press the down arrow button on the remote to scroll through the available audio options.
4. When the option you want to use is highlighted, press the OK button.
Notes:
The language feature only works if the disc was created with multiple language tracks. If the disc doesn’t contain the language
you selected, the disc will play in the default language.
When you choose an audio language during disc playback, you only override the audio language setting in the DVD/VCR’s
Language menu temporarily.
Some discs are programmed to only allow the audio setting to be changed via the disc’s menu. If changing audio option via the
Info Display doesn’t work (as described above), press MENU and change the audio setting via the disc’s menu.
Graphics contained within this publication are for representation only.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
Camera Angle Icon (DVD)
Some discs contain multiple angles of a particular scene or sequence. If the disc only has one angle, this feature won’t work. Currently,
very few discs have this feature.
1. While a disc is playing, press ANGLE on the remote. If the disc wasn’t created with multiple angles, the invalid symbol appears. If the
disc contains multiple angles, the Angle icon appears with the current angle number and the number of angles available. For example,
1 of 4 indicates that Angle 1 is displayed and there are 4 different angles available.
2. Press the up arrow button to go to the second camera angle. Press the arrow button again to go to the third angle, etc.
3. To resume normal playback, scroll through the camera angles until you get to the original angle.
Play Mode Icon (Audio CD)
When you play audio CDs, the various Play Modes are available from the Info Display.The Play Mode feature lets you set up the order in
which you want the tracks on the CD to play.There are three Play Modes:
Standard: the tracks play in the same order as listed on the CD (starting with track 1).This is the default play mode.
Random: the tracks on the CD play in a random order.
Program: the tracks play in the order you designate.To use the Program play mode, you must set up the order in which you want the
tracks to play in the DVD/VCR’s main menu system (go to page 54 for instructions).
Random
The Random option plays the tracks in a random order.
1. While you’re playing a disc, press INFO (the Info Display appears).
2. Press the left or right arrow button to highlight the Play Mode icon.
3. Press the down arrow button until Play Mode: Random appears in the text at the bottom of the Info Display (the tracks start playing in
random order).
To switch back to Standard Playback, follow steps 1 through 3 above until Play Mode: Standard appears underneath the Info Display icons.
Note:The player defaults to Standard Playback whenever you put a new CD into the DVD/VCR.
Program
The Program Play Mode is only available after you set up a playlist via the DVD/VCR’s Disc menu (page 54).
Graphics contained within this publication are for representation only.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
IntroScan Icon (Audio CD)
Use the IntroScan feature to preview each track on the CD.
1. While the CD is playing, press INFO (the Info Display appears).
2. Use the arrow buttons to highlight the IntroScan icon.
3. Press OK (the first 10 seconds of each track starts playing).
Playback Control (PBC) Icon (Video CD)
Use the arrow buttons to highlight the Playback Control icon. Press the up or down arrow button to go back and forth between On and
Off. How Playback Control (PBC) works varies for differentVideo CDs.With mostVideo CDs, turning on Playback Control enables you
to access theVideo CD’s menu if it has one and requires that you navigate through theVideo CD’s contents by using theVideo CD menu
instead of the DVD/VCR’s Info Display.When PBC is on, you won’t be able to use any repeat modes or skip titles in the DVD/VCR’s Info
Display.
Playing DiscsYou Recorded (DVD+R and DVD+RW)
Playback of DVD+R and DVD+RW discs that you used to record programs is explained in Chapter 3 (go to page 34).
Playing mp3,WMA, or JPEG files
Your DVD/VCR can play unprotected mp3 files, JPEG files, and unprotectedWMA files.
mp3 is an audio file format which compresses recorded music. It was developed by Fraunhofer Gesellschaft in collaboration withThomson Inc.The main advantage of the
mp3 format is the ability to store CD-quality music tracks that are user-friendly and compressed on a personal computer. mp3 (MPEG-3, which stands for Motion Picture
Experts Group-Layer 3, meaning the third layer of information) is a format used to compress digital audio. Since the audio is compressed, it takes up less space.
Note:You can only play true mp3 files in the DVD/VCR—some products use software to compress mp3 files and convert them to other formats such as MPX.Your
DVD/VCR won’t recognize or play MPX files or other types of converted mp3 files.
WMA (Windows Media Audio) is another audio file format developed by Microsoft.
JPEG files are image files. Make sure that they have a resolution of less than 5 megapixels (approximately 2MB).
Note:The time taken for the contents of the disc to be displayed varies according to the size and number of JPEG files actually on the disc. If nothing is displayed
after a few minutes, it is likely that certain files are too large. In this case, reduce the files’ resolution to less than 5 megapixels (approximately 2MB) and write
another disc.
Creating an mp3 Disc onYour Computer
Your DVD/VCR handles MPEG-1, layer 3 audio. If you encode your own mp3 files from an audio CD, avoid using the features of MPEG-2, such as the 22kHz sampling
frequency.
Be sure to make a data CD rather than an audio CD. If you make an audio CD, you will lose the extra features and compression of the mp3 format.
Notes:
Some transport modes (reverse and fast forward) are not available for mp3 CDs.
When burning multisession CDs, make sure you close the last session.
Winamp 2.7ful
1. Place the disc in the disc tray with the printed side facing up.
2. If the AutoPlay option in the Play Mode menu is enabled (see page 57), the disc’s contents are displayed,
cjjb2000a
otherwise press the PLAY button to display them.
_ _ _ AL)_ _ TEG _ _
3. Select a folder using the arrow buttons on the remote control, then press OK to display the list of files or
press PLAY to start playing all the files contained in the folder.
-3.jA- - LET _S_
-3.jA- - C _ _ _ I
Example of a jpeg folder list.
Graphics contained within this publication are for representation only.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
4. Select a file using the up and down arrow buttons, press OK (the playback options appear). Use the up and
. .
PLAY
down arrow buttons to scroll through the options and press OK when the desired option appears.
01.THE REASON
02.IMMORTALIT
03.TREAT HER
04.WHY ON WHY
05.LOVE IS IN
-3.jA- - LET_S_
•
mp3 file: if you press play when a file is highlighted (and you selected Play All), the player begins by playing
the selected file, then all the files and subfolders contained in the same folder.The player then plays the
contents of the folders at the same level as the folder containing the file selected at the start. If you
chose Standard Play, playback will stop after all of the files in the current folder (and its subfolders) have
played.
04. WHY ON WHY
Notes:
While listening you can use the
or
button to go back to the previous track or go to the next
one, and press the MENU button to display the disc’s contents.
Example of mp3 files.
Some file names are too long to be completely displayed.
•
JPEG file: the player starts the slide show with the JPEG file you have selected in the thumbnail screen
and proceeds to display all the JPEG files in the same folder, then all the JPEG files in the subfolders
located in the same folder.
Note: During the slide show you can use the arrow buttons to rotate the picture 90°, the ZOOM
button to magnify the picture, the
or
buttons to go back to the previous picture or go on to
the next one, the FORWARD and REVERSE buttons to change the speed of the slide show (the speed
selection varies depending upon the size of the JPEG files), and the MENU button to interrupt the
slide show and display the disc’s contents.
You can also press the INFO button to bring up the JPEG Info Display (see below).
5. When the player has played all the files, the disc’s contents appear.
6. Press STOP to end playback.
Example of JPEG files.
JPEG Index Screen
The Jpeg Index screen displays the contents of the disc.
01
01
Picture
Number
Play Mode Repeat
Zoom
Level
Slideshow
Speed
Playback
indicator
Rotate
JPEG Info Display
When you are playing a disc with JPEG files in the DVD/VCR, press the INFO button to bring up the Info Display.
Use the left and right arrow buttons to choose the setting you want to adjust, then use the up and down arrow
buttons to change the settings, or press OK to select.
Picture Number
Shows the current picture number being displayed.
Playback Indicator
This icon tells you the state of playback (play, pause, stop, etc.).
Play Mode
Allows you to set the order in which the pictures play:
Play All: all pictures in every folder on the disc play.
Play: all pictures in the selected folder play.
Random All: all pictures in every folder play at random.
Random: all pictures in the selected folder play at random.
Graphics contained within this publication are for representation only.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Playing Discs
Repeat
Allows you to set the repeat options for playback.
Repeat Disc: all pictures in every folder repeat play.
Repeat Off: repeat is set to off.
Rotate
Rotates the picture clockwise 90º, 180º and 270º, respectively. Press OK to rotate.
Zoom
Zooms in on the picture up to 4x. Press OK to zoom, or you can also zoom in by pressing ZOOM on the remote control.
Slideshow Speed
This feature allows you to change the speed of a JPEG slideshow.You can choose from Slow, Normal, and Fast.
Graphics contained within this publication are for representation only.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Menu System
•
•
•
•
•
•
•
Overview of the DVD/VCR’s Menu System
WatchTV Menu
Disc Menu
Tape Menu
Disc Library Menu
Timer Menu
Setup Menu
Graphics contained within this User’s Guide are for representation only. Some
of the menu screens, buttons, and display messages might be different in your
product than they appear in this book.The on-screen help text provides the
most current operational information.
page 52
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Menu System
Overview of the DVD/VCR’s Menu System
Since this product has many features, it has a wealth of menus and options.To access the main menu during playback, press the STOP button on the remote.To access the
main menu when you’re not playing a disc or tape, press the MENU button.
How to navigate through on-screen menus
Throughout the DVD/VCR’s menu system, you’ll see arrows on the on-screen menu bars.These arrows indicate you can use the correlating arrow buttons on the remote
control to navigate to different menus and access choices.When a menu item is highlighted, press OK to select the menu.
If you see the left arrow button, you can press the left arrow button on the remote control to return to the previous menu.Throughout the menu system, the GO BACK
button takes you to the previous menu.
Play Disc
My Show
Watch TV
Disc
Tape
Disc Library
Timers
Setup
My Show
Disc Title Menu
Playlist
Simon’s Show
Caroline Comics
Recorded on:
Disc Name:
Disc Number: 1
Copy Disc
Disc Actions
Sort by Title
To start playback from the beginning, press OK.
Press the left arrow button
on the remote to go to the
previous menu.
Press the right arrow
button or the OK button
on the remote to access
the DiscTitle Menu.
Press the up or down arrow button
on the remote control to see more
options.
The Main Menu
Live - Ch 2
Watch TV
Disc
Tape
Disc Library
Timers
Setup
The Main menu is divided into the following submenus:
No Disc
No Tape
WatchTV – shows current channel number or input.
Disc – plays a disc, accesses the disc title menu, enables you to copy a disc to tape, enables you to create a
customized playlist (audio CDs and DVDs), selects the screen format for DVDs, allows you to finalize a DVD+R
disc, and accesses title menus and disc menus for DVDs. Go to page 54 for details.
1 Library Disc(s)
10:49 am Thu 17-Mar 2003
Tape – provides options forVCR playback, such as AutoPlay; allows you to copy a tape to disc; allows you to
select segments of the tape for editing. Go to page 54.
DV-CAM
Disc Library – contains information about all programs you’ve recorded using this DVD/VCR.You can use
the Disc Library as a search tool by sorting recorded programs.As much information as possible is stored
automatically.The information is stored in the DVD/VCR’s memory and has storage limits.You may need to
delete some library contents in the future to make room for new recordings. For detailed information about the
Disc Library, go to page 33.
To watch TV, press OK.
Timers – set up timer recordings and view the list of existing timer recordings. Go to page 55 for general
information about this menu. For instructions to set up a timer, go to Chapter 3 (page 32).
Setup – accesses all of the menus from the Interactive Setup (the menus you went through the first time you
turned on the product); parental controls (rating limits); record quality settings; language options for on-screen
menus and discs; and advanced settings for audio and component video. Go to page 55 for more information.
DV-CAM – allows you to see video from a DV camcorder, connected through the DV IN Firewire jack on the
front of the DVD/VCR. Go to page 41 for more information.
Graphics contained within this publication are for representation only.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Menu System
WatchTV
Live - Ch 2
Watch TV
Disc
Tape
Disc Library
Timers
Setup
The WatchTV menu shows the current channel or input.To watchTV, press OK when the WatchTV menu is
highlighted (the channel banner appears to show you available program information, such as channel, name, and
time).You can also press the LIVE button to go directly to watchingTV. For more information, go to page 30.
No Disc
1 Library Disc(s)
10:49 am Thu 17-Mar 2003
DV-CAM
To watch TV, press OK.
Disc
Play Disc
Watch TV
Disc
Tape
Disc Library
Timers
Setup
Disc Title Menu
Playlist
You can only access the disc menu when you’ve inserted a compatible disc into the DVD/VCR.The submenus
follow:
Play Disc: starts playing the disc.
Copy Disc
Disc Actions
DiscTitle Menu: available only when you’ve inserted a DVD+R or DVD+RW disc that you’ve recorded in this
DVD/VCR.With DiscTitle Menu highlighted, press OK to access the disc’s title menu (each recording is listed).
For details about the DiscTitle Menu, go to Chapter 3 (page 35).
DV-CAM
To start playback from the beginning, press OK.
Playlist: (available for Audio CDs and DVDs):You can create a customized playlist just like you can with many
CD players where you rearrange the order in which the songs play.The playlist is played via the Program Play
option in the Info Display (page 48).When you want to copy a single title from a DVD+R or DVD+RW disc to a
tape, you can set up a playlist for the disc with only the title you want to copy.To set up a playlist, follow the on-
screen instructions.
Copy Disc: simultaneously starts playing disc and recording the disc to tape in theVCR. Note: If you’ve created
a playlist on the disc, only the playlist will be recorded.To copy the entire disc, you would have to delete the
playlist from the disc before you choose Copy Disc.
Disc Actions: this menu allows you to do some of the more advanced disc function, such as erasing and
finalizing the discs.
Play Disc
Watch TV
Disc
Tape
Disc Library
Timers
Disc Title Menu
Playlist
Rename Disc: press OK when highlighted (the on-screen keyboard appears). Follow the on-screen
instructions to give the disc a different name. Highlight Done when you’re finished, and press OK.You
cannot select the disc name for a finalized DVD+R disc.
Copy Disc
Disc Actions
Erase Disc: erases a DVD+RW disc so you can record new programming onto it. Not available for
DVD+R disc.
Setup
Lock Disc: protects contents of the DVD so nobody can record new programming onto it. If the disc is
locked, this option changes to unlock.This option isn’t available for DVD+R discs.
DV-CAM
To start playback from the beginning, press OK.
Finalize Disc: only appears if you have a DVD+R disc in the DVD/VCR. In order for a DVD+R disc to be
played in other DVD player, you must finalize it.
Make Compatible: DVD+RW discs only. If you have made edits to the disc, such as adding or deleting
chapter markers or hiding chapters, this option enables the edited version of the disc to be compatible
with other DVD players.
Note: not all DVD players support DVD+R and
DVD+RW discs.
Caroline Paige
Tape
Watch TV
Disc
PlayTape: starts playing the tape.
Play Tape
Tape
Play from Start: rewinds the tape to the beginning and starts playback.
Play From Start
Disc Library
Timers
Setup
DV-CAM
CopyTape: allows you to copy the contents of a tape to a DVD+R or DVD+RW disc.The copy will
begin from the current position on the tape to the end of the tape.
Copy Tape
Review A-B Edits
Note:Tapes (movies) that have been encoded with copy-protection cannot be copied
to disc.
Delete A-B Edits
Review A-B Edits: allows you to review A-B Edit segments you created using theVCR Info Display (see
page 38 for more information).Also allows you to play A-B Edit segments.
Delete A-B Edits: allows you to delete A-B Edit segments.
Graphics contained within this publication are for representation only.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Menu System
Disc Library
The disc library accesses information about what you’ve recorded onto discs. Details of this feature and the submenus are described on page 33.
Timers
Timer:You can add timers and view or edit existing timers from this menu for automatic recording.Timer recordings are especially useful when you have a favorite program
that you want to record every week and/or every day. If you use a cable box, the cable box must be On and tuned to the channel you want to record, during the timer
recording; if you’re recording from satellite, the satellite set-top box, also called a receiver, must be On and tuned to the channel you want to record. For details about setting
up a timer, go to page 32.
Setup
The Setup menu contains many submenus that are explained on the following pages. Follow the instructions at the bottom of the screen.
Note:To return to a previous menu, press the left arrow button or GO BACK.
Parental Controls
You can set up ratings limits and turn on the Parental Control feature in order to control the type of discs people can play in the DVD/VCR.The padlock icon on the Lock
menu indicates whether the player is locked or unlocked.
Locked:You need to enter the password in order to play discs that have a higher rating than what you’ve allowed.When the player is locked, nobody can access the
Lock menu without entering the password.
Unlocked: No password required to play discs. Even if you’ve set ratings limits, they won’t be enforced when the player is unlocked.
Notes:
The player is shipped unlocked without any rating limits set. If you want to use the Parental Control feature, set Ratings Limits and then lock the player.
Lock (and Unlock)
Parental Control
System Options
Recording Options
Disc Options
Lock
1. From the DVD/VCR’s main menu, select Setup and press OK (the Setup menu items appear).
2. Since Parental Control is highlighted, just press the OK button (the Parental Control menu items appear).
3. Since Lock is highlighted, just press the OK button on the remote.
Rating Limits
Unrated Titles
4. If prompted to enter a password, use the number buttons on the remote control and press OK (Confirm
Languages
Password appears). Enter the same numbers you entered before and press OK.
Installation
5. To return to the previous menu, press the left arrow button.
Once the player is locked, you’ll need to enter the password every time you access the Parental Controls menu.
Note:The player is shipped without any rating limits set.You need to set Ratings Limits (go to page 56 for
instructions) in order for the player to prevent people from playing discs with certain ratings.
Rating Limits
The Rating Limits menu lets you determine what types of discs can be played in the player, and what types of discs
will require a password to override the rating limit that you’ve set. In the U.S., the ratings feature is based on the
ratings set up by the MPAA (Motion Pictures Association of America) such as R, PG, G, etc.
Enter Password
Lock
Rating Limits
Unrated Titles
Confirm Password
The system ranks the ratings from 1 to 8 in order to accommodate ratings systems used in other countries (1 is
considered material that is least offensive and 8 is considered the most offensive).
Note: In order for the Ratings to be enforced, the DVD/VCR must be locked and the disc you’re playing
must contain a movie (or a title) that is rated.
Graphics contained within this publication are for representation only.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Menu System
To set Ratings:
Parental Control
System Options
Recording Options
Disc Options
Lock
1. From the DVD/VCR’s main menu, select Setup and press OK (the Setup menu items appear).
2. Since Parental Control is already highlighted, just press OK (the Parental Control menu items appear).
3. Highlight Rating Limits and press OK (the 8-level rating list appears).
Rating Limits
Unrated Titles
Languages
Installation
4. Use the up and down arrow buttons to move the bar to the rating level you find acceptable.
Ratings that don’t require a password (free access) appear under the bar.
Ratings that require a password appear above the bar.
5. Press OK.
Note:You must lock the player (page 55) in order for the ratings to be enforced.
UnratedTitles
Some discs contain titles (or movies) that don’t have a rating assigned to them. Sometimes, movies you
might find the most explicit are unrated. However, much of the new programming on discs, such as
interviews with actors and directors, is also unrated.Additionally, the discs you use to record (DVD+R
and DVD+RW) are considered unrated.
Apply DVD+R, +RW
In order to prevent unrated titles from being played, you need to choose Password Required from the
UnratedTitles menu, and lock the player.
If you want this setting to apply to discs you recorded (DVD+R and DVD+RW discs), simply highlight
Password required and press OK.
System Options
This menu contains settings and menus for advanced audio features, such as the digital audio out settings and surround sound settings.
Digital Audio Out: if you connected your DVD/VCR to a receiver via the DIGITAL AUDIO OUT jack on the back of the player, choose the type of receiver (or
decoder) you have: Dolby Digital or DTS.
Note: If you select DTS, and you don’t have a DTS receiver connected to the DVD/VCR you won’t hear any audio or the audio will be distorted.
™
QXpander: the QXpander feature simulates a six-speaker listening experience through just two speakers.The default setting is Off.To turn on theVirtual
®
Surround feature highlight QXpander, and press OK. Highlight On and press the OK button.
Audio Broadcast: default setting for type of audio recorded and played. Choices are Stereo, Mono, SAP (Second Audio Program).
QXpander
is a trademark of QSound Labs, Inc.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Chapter 5: Menu System
Recording Options
Parental Control
System Options
Recording Options
Disc Options
Destination: choose whether you want the default setting set to record to a disc (DVD) or a
tape (VCR).
Destination
Default Rec Quality: the better the quality, the more memory (space) the recording will use
on the DVD+R or DVD+RW disc or tape.The choices for a disc are:
Default Rec Quality
Tape Speed
1
2
3
4
5
6
Best
1 hour recording time on an empty 4.7 GB disc
2 hours recording time on an empty 4.7 GB disc
3 hours recording time on an empty 4.7 GB disc
4 hours recording time on an empty 4.7 GB disc
6 hours recording time on an empty 4.7 GB disc
8 hours recording time on an empty 4.7 GB disc
Languages
Installation
High
Good
Normal
Basic
Low
SmartRecord
Chapter Markers
Tape Speed: choose between SP (Standard Play) or SLP (Super Long Play) setting for
recording on tape.
Chapter Markers: choose when to add automatic chapter markers; choose between off, 5
minutes, or 10 minutes. See page 36 for more information about chapter markers.
SmartRecord: used withTimer Recordings to ensure you have enough space on a DVD+R or
DVD+RW disc to record the program.When SmartRecord is on, the DVD/VCR automatically
detects how much recording time is left on the disc and adjusts the Recording Quality
automatically if necessary. Does not apply forVCR recordings to tape.
Disc Options
4 x 3 Letterbox
AutoPlay: when you select On, a pre-recorded DVD movie disc immediately starts
playing after you insert it into the player (there’s no need to press the PLAY button).With
AutoPlay On, recordable discs (DVD+R or DVD+RW) with content recorded on them will
automatically display contents.
Note: For CDs with mp3 or JPEG files on them, instead of playing automatically, the
contents of the CD (the files and/or folders) appear automatically.
Screen format: the setting you choose adjusts the way a movie appears on yourTV (DVD
discs only). StandardTVs are 4 x 3 format. Depending on the type of television you have, you
may want to adjust the screen setting (also called the aspect ratio).The choices follow:
4 x 3 Letterbox – choose this setting if you want to see movies in their original aspect
ratio (height-to-width ratio).You’ll see the entire frame of the movie, but it will take up a
smaller portion of the screen vertically.The movie might appear with black bars at the top
and bottom of the screen.
4 x 3 Standard
4 x 3 Standard – choose this setting if you want the movie to fill the entire screen of
yourTV.This might mean that parts of the picture (the left and right edges) won’t be seen.
Most discs that are produced in a widescreen only format can’t be cropped in this fashion.
16 x 9 – choose this setting if your DVD/VCR is connected to a widescreenTV. If you
choose this setting and you don’t have a widescreenTV, the images on the screen might
appear distorted due to vertical compression. If you play a disc recorded in 4 x 3 format
on a widescreenTV, the left and right sides of the screen will appear black.
Tape Options
Tape AutoPlay: when you select On, the tape starts playing automatically after you insert it
intoVCR (there’s no need to press the PLAY button).
16 x 9
Languages
Display: the language that appears when you access this menu the first time reflects the
option you chose during the interactive setup.To change the language of the on-screen displays
(menus), use the arrow buttons to highlight a language and press OK to select it.
Parental Control
System Options
Recording Options
Disc Options
Audio: the language that appears when you access this menu the first time reflects the option
you chose during the interactive setup.You can change the audio language by highlighting an
option and pressing the OK button.The language selected will only apply when it is available
on the disc.
Languages
Display
Subtitles: some movies on DVD discs have subtitles. Set up your default settings in this menu.
You can quickly override these settings while playing a disc by using the Info Display (go to
page 46 for information).
Installation
Audio
Subtitles
Disc Menu
Automatic: if the language you selected in the interactive setup isn’t available for the title
you’re playing, but subtitles are available in that language—the subtitles for that language
will appear automatically during playback.
Off: subtitles won’t appear on the screen.
On: if the title (movie) has subtitles available, they will appear automatically.
Original: subtitle language will match the original audio (dialogue) language of the title
(movie).
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Chapter 5: Menu System
Disc Menu: many discs have their own menu that appears on the screen.You can select the language in
which you want the disc menu displayed. In order for your setting to take effect, the disc’s menu must
have been created with the corresponding language option.
Installation
Parental Control
System Options
Recording Options
Disc Options
The submenus contained in the Installation menu pertain to the type of signal that is connected to your DVD/
VCR (cable or off-air antenna). If you move, or change any of the information you entered when you first set up
your DVD/VCR, you need to change the information in the following menus.
Interactive Setup: the first time you turned on your DVD/VCR, you had to complete an interactive
setup so your DVD/VCR could have the information it needs to function properly. For details about the
Interactive Setup, go to page 16.To go through this procedure again to change settings, highlight Interactive
Setup and press the OK button.
Interactive Setup
Channel Search
Clock Setup
Languages
Installation
Channel Search: if you’ve changed program providers (cable and/or satellite), the Channel Search will
automatically search the signal and put the latest channels in the DVD/VCR’s channel list. Use the arrow
buttons to highlight Channel Search, and press OK to begin (a progress indicator appears to let you know
how quickly the search is being completed).
Channel List
Clock Setup: if the clock is incorrectly set or you skipped this step during the interactive setup, you can
set the DVD/VCR’s clock using the number buttons on the remote and the arrow buttons to navigate.
Follow the on-screen instructions.
Searching channels...
35% complete
2 channels found
Please wait....
Note: In order for Timer Recordings to work, you must set the clock to the correct time and date.
Channel List: enables you to change what channels are accessed when you press the DVD Recorder’s
channel up and down buttons (if you delete a channel from the channel list, you can still access it by using
the number buttons on the remote). For more explanation, go to page 17.
DV-CAM
The DV-CAM menu allows you to see video from a DV camcorder, connected through the DV IN Firewire jack
on the front of the DVD/VCR. For more information, go to page 41.
Graphics contained within this publication are for representation only.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Additional Information
•
•
•
•
•
Troubleshooting
Handling Cautions
Maintenance of Cabinet
LimitedWarranty
Accessory Information
Graphics contained within this User’s Guide are for representation only. Some
of the menu screens, buttons, and display messages might be different in your
product than they appear in this book.The on-screen help text provides the
most current operational information.
page 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6:Additional Information
Troubleshooting
General Problems
Player won’t work (locks up)
•
•
Try unplugging the AC power cord and plugging it back in.
Reset the DVD/VCR: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the DVD STOP button—wait at least 3
seconds before you release both of the buttons.You’ll need to set up your menu preferences again because this Reset Procedure returns the DVD/VCR’s menus
to the factory default settings and also erases the contents of the Disc Library.
No power
•
•
•
Plug in the DVD/VCR. Make sure both ends of the AC power cord are securely plugged into the Recorder and into an AC outlet.
Make sure you’ve plugged it into a working outlet and/or a power strip that is turned on.
Don’t plug the unit into an outlet that is operated by a wall switch.
No picture (orTV displays “Unusable Signal” or “Insufficient Video Signal”)
•
•
•
•
•
•
Turn on theTV.
Tune yourTV to theVideo Input Channel that corresponds to the jacks you used to connect theTV to the DVD/VCR (go to page 19 for more help).
Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position.Try playing the disc again.
Make sure your DVD/VCR is connected properly.
If you connected a satellite receiver or a cable box, make sure it is turned on.
Press the ANTENNA button.
A screen saver appears on theTV
•
Your player is equipped with a screen saver that appears on theTV after your player has been idle for several minutes.To make it disappear, press STOP or
CLEAR on the remote.
The menu is displayed in a foreign language
•
The Language menu (Display menu) is set to that language. Go to the Setup menu and choose Languages (in Spanish, shown as Idiomas; in French, as Langues),
choose the Display option. Highlight the language you prefer, and press OK.
I forgot my password
•
Press the STOP button on the front of the unit while you press the STOP button on the remote control—keep pressing both buttons for approximately 3
seconds (until the icon disappears from the front panel display). Release both buttons (the player should be unlocked). If that doesn’t work, try resetting the
DVD/VCR (instructions are listed below).
•
Reset the DVD/VCR: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP button—wait at least 3 seconds
before you release both of the buttons.You’ll need to set up your menu preferences again because this Reset Procedure returns the DVD/VCR’s menus to the
factory default settings and also erases the contents of the Disc Library.
The time (clock) is wrong
Go to the Setup menu, then Installation, and select Clock Setup. Set AutoClock to No and then set the time manually.
DVD Problems
Disc won’t eject
•
•
When you put a disc into the player, the player may take up to 15 seconds to read the disc and determine the disc type.You won’t be able to eject the disc
during this time.Wait 15 seconds and try again.
Maybe theTray Lock feature has been activated. If locked, the padlock icon shows in the display on the front of the unit.To unlock the disc tray, press and hold
the STOP button on the front of the unit and then press and hold the OPEN/CLOSE button on the front of the unit at the same time—wait 3 seconds before
releasing both buttons.
•
Try unplugging the AC power cord and plugging it back in.
Disc tray won’t open
•
Maybe theTray Lock feature has been activated. If locked, the padlock icon shows in the display on the front of the unit.To unlock the disc tray, press and hold
the STOP button on the front of the unit and then press and hold the OPEN/CLOSE button on the front of the unit at the same time—wait 3 seconds before
releasing both buttons.
Disc won’t play
•
Many problems encountered when playing (or recording) a disc are related to the wide variation in disc quality due to the large number of brands and
manufacturers.We highly recommend using discs from a reputable manufacturer. If you encounter problems with one brand, please try another brand.
Insert a disc with the label side facing up.
Check the type of disc you put into the player.This player only plays DVD video discs,Video CDs, audio CDs, and CDs with true mp3 files and/or JPEG files.
mp3 files that have been converted to MPX files (or similar types of files) won’t be recognized by your DVD/VCR. If you try to play an incompatible disc type,
Disc Problem appears on the screen next to the Disc menu.
•
•
•
Both the DVD/VCR and pre-recorded DVD movie discs are coded by region. If the regional codes don’t match, the disc cannot be played.This player is Region
No. 1 for North America. Region coding isn’t applicable to discs you use to record (DVD+R and DVD+RW).
Press STOP (the main menu appears). Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position.Try playing the disc again.
If you’ve put both a DVD in the disc tray and a videotape in theVCR deck, select the Disc menu from the main menu and choose Play Disc (or press the PLAY
button when the Disc menu is highlighted).
•
•
•
•
If you’re playing a Multisession CD, you might not have closed the session before ejecting it from your computer. Close the session and try the disc again.
If you’re trying to play a DVD+R or DVD+RW disc you recorded in this DVD/VCR in another DVD player, the DVD player may not support DVD+R or
DVD+RW discs.Also, if it is a DVD+R disc make sure you finalize it (page 35).
•
•
If you’re trying to play a DVD-RW or DVD-R disc, it must have been recorded using the video mode (VM).Also, DVD-R discs must have been finalized.
If it’s a DVD+R or DVD+RW disc, check the setting in the Parental Controls menu. Go to UnratedTitles, and see if the box is checked next to Apply to DVD+R and
DVD+RW discs. If there is a check in the box and you set UnratedTitles to Password Required, simply highlight the checkbox and press OK.Try to play the
disc again.
•
DVD-RAM discs can’t be played on this unit.
Graphics contained within this publication are for representation only.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6:Additional Information
•
•
If the disc appears to be playing but you do not see a picture (or Unusable Signal or InsufficientVideo Signal appears on the screen), make sure theTV is tuned to
the correctVideo Input Channel for how you connected it to the DVD/VCR. Go to page 19 for help.
If you are trying to play a disc that was recorded on a PC, it must have been recorded using a compatible video format.This product plays DVD video (MPEG2),
MPEG4,Video CDs (MPEG1), audio CDs, or data discs (CD-R, CD-RW) with jpeg pictures, mp3s, orWMA files.
Play starts, but then stops immediately
•
•
The disc is dirty. Clean it.
Condensation has formed in the DVD/VCR.Allow it to dry out.
The picture is distorted and/or fuzzy; or “jumps” during disc playback
•
•
•
•
•
The disc might be damaged or scratched.Try another disc.
It is normal for some distortion to appear during forward or reverse scan.
The disc might be dirty. Clean it.
Some discs have defects that cause them to jump from one scene to the next.
Turn the PROG SCAN switch on the back of the DVD/VCR to the “off” position.This switch should only be turned on if you’ve connected the DVD/VCR to a
television that uses progressive scanning to display the image. Some, but not all High DefinitionTelevisions (HDTVs) and multimedia monitors use progressive
scan.
•
If you have a progressive scanTV connected, a slight jumping of the signal is normal when you first play a DVD disc.A more detailed explanation follows:
If you have a progressive scanTV connected to the DVD/VCR via the COMPONENT jacks (Y, Pb, Pr) and turned on the PROG SCAN switch, the DVD/VCR
automatically switches between progressive scan and regular interlace because progressive scan is only available when you play DVD discs.As the signal is
converted from interlace to progressive (and vice versa), the Recorder resynchronizes the signal. Depending upon yourTV, this resynchronization process might
cause a slight “jump” in the picture when you start playing a DVD disc and again when you return to watchingTV.
No sound or distorted sound
•
•
Make sure your player is connected properly. Make sure all cables are securely inserted into the appropriate jacks.
You may need to readjust the Digital Audio Out setting (from the System Options menu). Go to page 56. If you select DTS, and your DVD/VCR isn’t connected
to a DTS-capable receiver, you won’t hear any sound, or the sound will be distorted.
•
•
•
Turn yourTV to itsVideo Input Channel (go to page 19).
Sound is muted when you’re using search features (fast forward, reverse, frame advance, etc.).
If you connected an audio receiver to your DVD/VCR, make sure you chose the correct input setting on the receiver.
Can’t advance through a movie
•
You can’t advance through the opening credits and warning information that appear at the beginning of DVD movies because the disc is programmed to prohibit
that action.
Subtitle and/or audio language is not the one selected from the initial setting
•
If the subtitle and/or audio language does not exist on the disc, the disc’s priority language will be selected instead. Set the subtitle and/or audio language
manually through the Info Display or the DVD/VCR’s menu system. Go to page 46 for more information.
Play doesn’t begin
•
The rating of the title on the disc exceeds the rating limit set in the Ratings Limits menu. Unlock the player and/or change the rating limit in those menus. Go to
page 55 for more information.
No forward or reverse scan
•
•
Some discs have sections that prohibit rapid scanning, or title and chapter skip.
If you’re trying to skip through the warning information and credits at the beginning of a movie, you won’t be able to.This part of the movie is often
programmed to prohibit skipping through it.
Desired angle cannot be changed
Most discs don’t have the multi-camera angle system, and some discs only have multiple angles during certain parts of the movie.
•
Picture is too tall and thin
Change the Screen Format in the menu system. Go to page 57 for more information.
•
Picture is too short and wide
Change the Screen Format in the menu system. Go to page 57 for more information.
•
Disc I recorded won’t play in another DVD player
•
•
If it’s a DVD+R disc, make sure you finalize the disc (page 35).
Some DVD players won’t play DVD+R and/or DVD+RW discs. Check the DVD player’s manual.
Recording/Copying Problems
Not enough space on the DVD+R or DVD+RW disc
•
To get more recording time, you can change the Recording Quality setting (page 57). If it is a DVD+RW disc, you can delete some titles to create more space.
Won’t record
•
You can’t record content that is copy-protected. If a message appears notifying you that you can’t record the material, press CLEAR on the remote to remove
the message from the screen.You also can’t copy DVD movies by connecting a DVD player to the DVD/VCR.
•
•
•
Make sure you’ve inserted a DVD+R or DVD+RW disc.You can’t record on DVD-R, DVD-RW, DVD-RAM, or any CD discs.
Make sure the disc isn’t locked, which protects contents of disc but prevents recording. Go to page 55 for more information.
Many problems encountered when recording (or playing) disc are related to the wide variation in disc quality due to the large number of brands and
manufacturers.We highly recommend using discs from a reputable manufacturer. If you encounter problems with one brand of disc, please try another brand.
Graphics contained within this publication are for representation only.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6:Additional Information
mp3 files
The following recommendations can’t be taken as a guarantee that the DVD/VCR will play mp3 recordings, or as an assurance of sound quality. Certain technologies
and methods for mp3 file recording on CD-R discs prevent optimal playback of these files on your product.
•
Make sure the file is a true mp3 file.You can only play true MP3 files in the DVD/VCR—some products use software to compress mp3 files and convert them
to other formats such as MPX.Your DVD/VCR won’t recognize or play MPX files or other types of converted mp3 files.Also, if the mp3 file is copy protected
from a secure download site, it may not play.
•
When naming mp3 files, don’t exceed 12 characters, and enter .mp3 as the file extension.When using a general name format of:Title.mp3, make sure the title is
8 characters or less, don’t use spaces, and don’t use special characters (such as, =. +, /, %, &, etc.).
•
•
Whatever the real recording capacity of the CD-R, don’t use more than 630MB of recording space on the disc.
Use a decompression transfer rate of at least 128 kb/sec (kilobits/second) when recording mp3 files. Sound quality with mp3 files basically depends on the rate
of compression you choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to mp3 format, of at least 128 kb/sec
and up to 160 kb/sec. However, choosing higher rates like 192 kb/sec or more, only rarely give even better sound quality. Conversely, files with sampling rates
below 128 kb/sec won’t be played.
Can’t get to DVD/VCR’s main menu
•
Press the STOP button until the main menu appears or press the left arrow button to return to the previous menu. If that doesn’t work, remove the mp3 disc
from the disc tray.
Can’t make the Info Display appear
The Info Display is only available when playing DVD discs,VCR tapes,Audio CDs,Video CDs, and watchingTV.
•
VCR Problems
No picture or snowy picture
•
•
•
Turn on theTV.
Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position.
Make sure your DVD/VCR is connected properly, and tune yourTV to theVideo Input Channel that corresponds to the jacks you used to connect theTV to
the DVD/VCR (go to page 19 for more help).
•
•
•
•
•
If you connected a satellite receiver or a cable box, make sure it is turned on.
Some snow or streaks are normal during search, stop action, frame advance, and slow-motion playback.
Adjust the tracking by pressing the CH+ and/or CH- buttons during tape playback.
The tape may be worn out or poor quality.
Press the ANTENNA button.
Tape won’t play
•
Make sure your DVD/VCR is connected properly, and tune yourTV to theVideo Input Channel that corresponds to the jacks you used to connect theTV to
the DVD/VCR (go to page 19 for more help).
•
Try ejecting the tape and reinserting it.
•
•
Make sure the tape is not broken.
If the main menu appears when you press PLAY, you probably have both a DVD disc loaded in the disc tray and a tape in theVCR deck.You need to select Tape
from the main menu to play it.
•
Make sure the DVD/VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback.
Time counter disappears during searching
•
•
This is normal if the tape reaches a section where there is nothing recorded on it.
Try ejecting the tape and reinserting it.
Tape won’t record
•
•
Make sure there is a recordable tape in the DVD/VCR.
Make sure the tape’s safety tab is intact and has not been removed.
Timer Recordings
•
•
•
Make sure the clock is set and the time is correct.Your DVD/VCR is equipped with an automatic clock, but the feature might not work properly in some areas.
If the time is inaccurate, set it manually by selecting the Setup menu; then Installation; and then Clock Setup.
Make sure you set up the timer recording correctly—specifically, check the Destination field (you might have chosen Disc when you meant to chooseTape, or
vice versa); check the AM/PM setting.
If you’re recording from a satellite receiver or cable box, make sure they are turned on and tuned to the desired channel when it is time for the recording to
start.Also, if you used audio/video or S-Video cables to connect your satellite receiver or cable box to the DVD/VCR, tune the DVD/VCR to the corresponding
Video Input Channel by pressing the INPUT button on the remote control. If you used a coaxial cable to connect your satellite receiver or cable box to the
DVD/VCR, tune the DVD/VCR to the corresponding satellite / cable box channel (usually channel 2, 3, or 4). Remember, the DVD/VCR must be tuned to the
appropriate input that matches how the satellite receiver or cable box is connected before you turn off the DVD/VCR.
Graphics contained within this publication are for representation only.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6:Additional Information
Remote Control
Remote won’t work
•
You might be in the wrong mode.To operate your DVD/VCR, press the DVD/VCR button on the remote before you press any other buttons. If you’re
operating theTV, press theTV button first, etc. (this remote operates most RCA, GE, and ProscanTVs and satellite receivers, and you can program it to operate
other brands of televisions).
•
•
•
Insert new batteries in the remote.
Operate the remote control at a distance of no more than 20 feet.
Remove any obstacles between the remote and the DVD/VCR or other component. If your DVD/VCR is in an entertainment cabinet, the glass doors might
obstruct the remote control from operating the DVD/VCR. Open the doors.
Can’t program the remote
•
The universal remote control that came with your DVD/VCR is already programmed to operate most RCA, GE, and Proscan components.You can program it
to operate many other brands and models ofTVs, cable boxes, digital satellite receivers, audio components, etc. However, the remote doesn’t support all brands
and all models so there is a possibility the remote can’t be programmed to operate your component. Instructions for programming the remote control are on
page 22.
•
If you’re trying to program the AUX button, you must use the Direct Entry method, NOT the Automatic Code Search method.
Lost the remote control
•
To order a new remote control, go to page 65.The buttons on the front of the DVD/VCR operate the DVD/VCR’s basic functions, but you won’t be able to
use the menu system without the remote control.The buttons on the front of the unit are described on page 7.Also, if you have another RCA, GE, or Proscan
brand product with a remote control that has a DVD button, some of the buttons will probably operate this product if you press the DVD button first.
Handling Cautions
•
•
•
•
•
•
Before connecting other components to this DVD/VCR, be sure to turn all components off.
Don’t move the player while a disc is being played.The disc may get scratched or broken, and the player’s internal parts may be damaged.
Don’t put any container filled with liquid or any small metal objects on the DVD/VCR.
Don’t put your hand into the disc tray.
Don’t place anything other than the disc in the disc tray.
Exterior influences such as lightning and static electricity can affect normal operation. If this occurs, turn the unit off and on again with the STANDBY•ON button, or
disconnect and then reconnect the AC power cord to the AC power outlet.The unit should operate normally.
•
Be sure to remove the disc and turn off the player after use.
Maintenance of Cabinet
For safety reasons, when cleaning the cabinet be sure to disconnect the AC power cord from the AC outlet.
•
•
Do not use benzene, thinner, or other solvents for cleaning.
Wipe the cabinet with a soft cloth.
Formation of Condensation
•
Due to sharp changes in temperature and humidity, condensation may form if warm air comes in contact with any cold parts inside the player.
•
When condensation forms inside the player, the player may not operate correctly. If this occurs, leave the player at room temperature until the inside of the player
becomes dry and operational.
•
If condensation forms on a disc, wipe the disc with a soft, dry cloth by moving the cloth from the center hole toward the outer edge.
Handling Discs
•
•
•
Don’t touch the disc’s signal surfaces. Hold by the edges or by one edge and the hole in the center.
Don’t affix labels or adhesive tape to label surfaces. Don’t scratch or damage the label.
Do not use damaged (cracked or warped) discs.
Graphics contained within this publication are for representation only.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Chapter 6:Additional Information
LimitedWarranty
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
•
One year from date of purchase for parts and labor.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
What we will do:
•
Pay any Authorized RCA Service Center the labor charges to repair your DVD/VCR.
•
Pay any Authorized RCA Service Center for the new or, at our option, refurbished replacement parts required to repair your DVD/VCR.
How you get service:
•
•
•
Take your DVD/VCR to any Authorized RCA Service Center.To identify your nearest Authorized RCA Service Center, ask your dealer, look in theYellow Pages, or call
1-800-336-1900.
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty
service. For rental firms, proof of first rental is also required.
Pick up your DVD/VCR when repairs are completed.
What your warranty does not cover:
•
•
•
•
•
•
Acts of nature, such as but not limited to lightning damage.
Adjustment of customer controls.
Damage from misuse or neglect.
A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes.
Batteries.
Units purchased or serviced outside the U.S.A.
Product Registration:
•
Please complete the online Product Registration on RCA.com or complete and mail the Product Registration Card packed with your unit. It will make it easier to contact
you should it ever be necessary.The return of the card is not required for warranty coverage.
Limitation ofWarranty:
•
THEWARRANTY STATED ABOVE ISTHE ONLYWARRANTY APPLICABLETOTHIS PRODUCT.ALL OTHERWARRANTIES, EXPRESS OR IMPLIED (INCLUDING
ALL IMPLIEDWARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NOVERBAL ORWRITTEN
INFORMATION GIVEN BYTHOMSON INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANYWAY INCREASETHE SCOPE OFTHIS
WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDERTHISWARRANTY ISTHE EXCLUSIVE REMEDY OFTHE CONSUMER.THOMSON INC. SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROMTHE USE OFTHIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIEDWARRANTY ONTHIS PRODUCT.THIS DISCLAIMER OFWARRANTIES AND LIMITEDWARRANTY ARE GOVERNED BYTHE LAWS OF
THE STATE OF INDIANA. EXCEPTTOTHE EXTENT PROHIBITED BY APPLICABLE LAW,ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ONTHIS PRODUCT IS LIMITEDTOTHE APPLICABLEWARRANTY PERIOD SET FORTH ABOVE.
How state law relates to warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your product outside the United States:
•
This warranty does not apply. See your dealer for warranty information.
Graphics contained within this publication are for representation only.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6:Additional Information
Accessory Information
There are various accessories available to complement your DVD/VCR. Prices are subject to change without notice. All accessories
are subject to availability.
A shipping and handling fee will be charged upon ordering, and we are required by law to collect the appropriate sales tax for each individual
state, country, and locality to which the merchandise is being sent.
Optical Plug to Optical Plug for Optical Audio connection
to a compatible receiver.
Surge Protector (part number PS83202C2);
price $34.95
3 feet (part number DV3); price $15.95
6 feet (part number DV6); price $19.95
ON-OFF
TV
DVD/VCR CABLE
SAT
AUX
AUDIO
ZOOM EDIT
OPEN ANGLE
CLOSE
TIMER•GUIDE INFO
MENU
CLEAR
OK
AGAIN
ADVANCE
LIVE
Optical Plug to Mini Plug
3 feet (part number DV3M); price $15.95
6 feet (part number DV6M); price $19.95
VOL
CH
MUTE
1
GO
BACK
2
3
6
9
4
5
8
7
INPUT
0
ANTENNA
REVERSE PLAY FORWARD
RECORD
STOP
PAUSE
Remote Control (RCR615DCM1)
part number 261387; $23.10
How to Order
To place an order by phone, have yourVisa, MasterCard, or Discover Card ready and call
the toll-free number listed below.
Use this number only to place an order for accessory items.
1-800-338-0376
Graphics contained within this publication are for representation only.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only
add delays in service for your product.
Thomsonn Inc.
10330 North Meridian Street
Indianapolis, IN 46290
©2005 Thomson Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
Printed in Thailand
THOMSON
TOCOM 1644356A
Download from Www.Somanuals.com. All Manuals Search And Download.
|