P r o 8 0 9
USER‘S
GUIDE
Table of Contents.........1
Optional Accessories ...2
First-Time Operation....8
Remote Control .........15
Powering Your Camcorder
18
Recording Features....26
Playback...................52
Trouble Checks..........56
Care and Maintenance58
Specifications............60
Limited Warranty ......61
Index........................62
®
C A M C O R D E R
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
(continued)
CAUTION: READ “IMPORTANT SAFETY INSTRUCTIONS FOR AC
ADAPTER/CHARGER” ON THE NEXT PAGE BEFORE USING THE AC
ADAPTER/CHARGER.
CAUTION: MAINTAIN ELECTRICAL SAFETY. POWERLINE-OPERATED
EQUIPMENT OR ACCESSORIES CONNECTED TO THIS UNIT SHOULD BEAR
THE UL LISTING MARK OR, IF PURCHASED AND USED IN CANADA, THE
CSA CERTIFICATION MARK ON THE ACCESSORIES THEMSELVES AND
SHOULD NOT HAVE BEEN MODIFIED SO AS TO DEFEAT THE SAFETY
FEATURES. THIS WILL HELP AVOID ANY POTENTIAL HAZARD FROM
ELECTRIC SHOCK OR FIRE. IF IN DOUBT, CONTACT QUALIFIED SERVICE
PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD,
DO NOT EXPOSE CAMCORDER OR AC ADAPTER/
CHARGER TO RAIN OR MOISTURE.
CAUTION
MISE EN GARDE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The symbol of a lightning
flash within a triangle is
intended to alert the user
An exclamation point
within a triangle is
intended to alert the user
to the presence of
to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure and which may
be of sufficient magnitude to constitute
a risk of electric shock.
important operating and maintenance
(service) instructions in the literature
accompanying the product.
CAUTION: AVOID OPERATING YOUR CAMCORDER IMMEDIATELY AFTER
MOVING IT FROM A COLD LOCATION TO A WARM LOCATION. GIVE THE
CAMCORDER 1-1/2 TO 2 HOURS TO REACH A STABLE TEMPERATURE BEFORE
INSERTING A VIDEO CASSETTE. WHEN MOVED FROM A COLD AREA TO A
WARM LOCATION, MOISTURE MAY CONDENSE ON THE HEAD DRUM INSIDE
THE MACHINE. THIS MOISTURE COULD CAUSE THE TAPE TO STICK TO THE
HEADWHEEL AND DAMAGE THE HEADWHEEL OR TAPE.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY I NSTRUCTIONS
Important Safety Instructions for AC Adapter/Charger
2. Extension cord is properly wired and
in good electrical condition, and
Before using the AC adapter/charger,
read all instructions and cautionary
markings on (1) AC adapter/charger,
(2) battery, and (3) product using battery.
3. Wire size below is met:
Minimum
AWG Size
Length of Extension
Cord (Feet)
Caution: To reduce risk of injury,
charge only rechargeable batteries type
AV608, AV8MM, or AV8MSH. Other
types of batteries may burst causing
personal injury and damage.
18
16
Equal to or less
than 100
Equal to or less
than 150
Do not expose the adapter/charger to
moisture of any kind.
Do not operate adapter/charger with a
damaged cord or plug. Replace it
immediately.
Use of an attachment not recommended
or sold by the battery charger
Do not operate adapter/charger if it has
received a sharp blow, been dropped, or
otherwise damaged in any way. Take it
to a qualified serviceman.
manufacturer may result in a risk of fire,
electric shock, or injury to persons.
To reduce risk of damage to electric plug
and cord, pull out the cord with the plug
rather than the cord when disconnecting
the adapter/charger from the wall outlet.
Do not disassemble adapter/charger.
Take it to an Authorized RCA
Camcorder Servicenter when service or
repair is required. Incorrect reassembly
may result in a risk of electric shock.
Make sure the cord is located so that it
will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
To reduce risk of electric shock, unplug
adapter/charger from outlet before
attempting any maintenance or cleaning.
Use of an improper extension cord could
result in a risk of fire and electric shock.
If an extension cord must be used, make
sure that:
1. Pins on the plug of the extension cord
are the same number, size, and shape
as those of the plug on the
Be sure to save these operating
instructions for future reference.
adapter/charger.
CAUTION: FCC REGULATIONS STATE THAT ANY UNAUTHORIZED
CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE
USER’S AUTHORITY TO OPERATE IT.
CAUTION: THE UNAUTHORIZED RECORDING OF TELEVISION
PROGRAMS AND OTHER MATERIALS MAY INFRINGE THE RIGHTS OF
OTHERS.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
not use this polarized plug with an
extension cord, receptacle, or other
outlet unless the blades can be fully
inserted without blade exposure. If
you need an extension cord, use one
with a polarized plug.
In addition to the careful attention
devoted to quality standards in the
manufacture of your product, safety
is a major factor in the design of
every instrument. However, safety is
your responsibility too.
5. Power Sources—This product should
be operated only from the type of
power source indicated on the
marking label. If you are not sure of
the type of power supply to your
home, consult your dealer or local
power company. For products
intended to operate from battery
power, or other sources, refer to the
operating instructions.
These pages list important
information that will help to assure
your enjoyment and proper use of a
camcorder, adapter/charger, and
accessory equipment. Please read
them carefully before operating your
products.
Installation
1. Read and Follow Instructions—
All the safety and
operating instruc-
tions should be read
before the product is
operated. Follow all
operating
6. Overloading—Do not overload wall
outlets, extension cords, or integral
convenience receptacles as this can
result in a risk of fire or electric shock.
Overloaded AC outlets, extension
cords, frayed power cords, damaged
or cracked wire
instructions.
insulation, and
broken plugs are
dangerous. They
may result in a
2. Retain Instructions—The safety and
operating instructions should be
retained for future reference.
shock or fire
hazard.
Periodically examine the cord, and if
its appearance indicates damage or
deteriorated insulation, have it
replaced by your service technician.
3. Heed Warnings—Comply with all
warnings on the product and in the
operating instructions.
4. Polarization—This product is
equipped with a polarized alternating-
current line plug (a plug having one
blade wider than the other). This plug
will fit into the power outlet only one
way. This is a safety feature. If you
are unable to insert the plug fully into
the outlet, try reversing the plug. If
the plug still fails to fit, contact your
electrician to replace your obsolete
outlet. To prevent electric shock, do
7. Power-Cord Protection—Power-
supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or
against them, paying particular
attention to cords at plugs,
convenience receptacles, and the point
where they exit from the product.
(continued on next page)
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
(continued)
8. Ventilation—Slots and openings in
the products are provided for
ventilation to ensure reliable
operation of the product and to
protect them from overheating.
These openings must not be blocked
or covered. The openings should
never be blocked by placing the
product on a bed, sofa, rug, or other
similar surface. This product should
not be placed in a built-in
10. Water and Moisture—Do not use
this product near water—for
example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet
basement, or near a swimming pool
and the like.
11. Accessories—Do not place this
product on an unstable cart, stand,
tripod, bracket, or table. The
product may fall, causing serious
injury to a child or adult as well as
serious damage to the product. Use
this product only with a cart, stand,
tripod, bracket, or table
installation such as a bookcase or
rack unless proper ventilation is
provided or the product
manufacturer’s instructions have
been followed.
recommended by the manufacturer
or sold with the product. Any
mounting of the product should
follow the manufacturer’s
instructions and use a mounting
accessory recommended by the
manufacturer.
11A A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product and
cart combination to overturn.
9. Attachments—Do not use
attachments unless recommended by
the product manufacturer as they
may cause hazards.
Caution: Maintain electrical
safety. Powerline operated
equipment or accessories connected
to this unit should bear the UL
listing mark or CSA certification
mark on the accessory itself and
should not be modified so as to
defeat the safety features. This will
help avoid any potential hazard
from electrical shock or fire. If in
doubt, contact qualified service
personnel.
(continued on next page)
v
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
(continued)
13. Power Lines—An outside antenna
system should not be located in the
vicinity of overhead power lines,
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching or approaching such power
lines or circuits as contact with them
might be fatal. Installing an outdoor
antenna can be hazardous and should
be left to a professional antenna
installer.
12. Outdoor Antenna Grounding—If
an outside antenna or cable system is
connected to the product, be sure the
antenna or cable system is grounded
so as to provide some protection
against voltage surges and built-up
static charges. Article 810 of the
National Electrical Code,
ANSI/NFPA No. 70 (Section 54 of
Canadian Electrical Code, Part 1)
provides information with respect to
proper grounding of the mast and
supporting structure, grounding of
the lead-in wire to an antenna-
discharge unit, size of grounding
conductors, location of antenna-
discharge unit, connection to
Use
14. Cleaning—Unplug this product
from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
grounding electrodes, and
requirements for the grounding
electrode. See example below as per
National Electrical Code,
ANSI/NFPA 70.
15. Object and Liquid Entry—Never
push objects of any kind into this
product through openings as they
may touch dangerous voltage points
or “short-out” parts that could result
in a fire or electric shock. Never
spill liquid of any kind on the
product.
Example of Antenna Grounding
ANTENNA
LEAD IN
WIRE
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE
POWER SERVICE GROUNDING
EQUIPMENT
ELECTRODE SYSTEM
(NEC ART 250, PART H)
(continued on next page)
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
(continued)
16. Lightning—For added protection
for this product during a lightning
storm, or when it is left unattended
and unused for long periods of time,
unplug it from the wall outlet and
disconnect the antenna or cable
system. This will prevent damage to
the product due to lightning and
power line surges.
D.If the product does not operate
normally by following the
operating instructions. Adjust
only those controls that are
covered by the operating
instructions. Improper
adjustment of other controls may
result in damage and will often
require extensive work by a
qualified technician to restore the
product to its normal operation.
E. If the product has been dropped in
any way.
F. When the product exhibits a
distinct change in performance—
this indicates a need for service.
19. Replacement Parts—When
replacement parts are required, have
the service technician verify that the
replacements he uses have the same
safety characteristics as the original
parts. Use of replacements specified
by the product manufacturer can
prevent fire, electric shock, or other
hazards.
Service
17. Servicing—Do not attempt to
service this product yourself as
opening or removing covers may
expose you to dangerous voltage or
other hazards. Refer all servicing to
qualified service personnel.
20. Safety Check—Upon completion of
any service or repairs to this product,
ask the service technician to perform
safety checks recommended by the
manufacturer to determine that the
product is in safe operating
18. Conditions Requiring Service—
Unplug this product from the wall
outlet and refer servicing to qualified
service personnel under the
condition.
21. Wall or Ceiling Mounting—The
product should be mounted to a wall
or ceiling only as recommended by
the manufacturer.
following conditions.
A.When the power-supply cord or
plug is damaged.
22. Heat—The product should be
situated away from heat sources
such as radiators, heat registers,
stoves, or other products (including
amplifiers) that produce heat.
B. If liquid has been spilled, or
objects have fallen into the
product.
C. If the product has been exposed to
rain or water.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Product Registration ............................i
• Digital Special Effects ..................40
• Time Counter ................................41
• Titler ........................................42-43
Safety Precautions...........................i-vii
Optional Accessories ........................2-7
• Edit Insert Using the
• Accessory Order Form.................5-7
Camcorder ..........................44-45
• Edit Insert From a Monitor
First-Time Operation.....................8-14
Remote Control ............................15-17
Powering Your Camcorder .........18-23
Video Cassettes .............................24-25
TV or VCR .........................46-47
• Recording from VCR or TV
Monitor...............................48-49
Attaching the Shoulder Strap...........50
Recording and Traveling Tips..........51
Playback
Recording Features
• Display On/Off Feature.................26
• Quick Review................................26
• Edit Search....................................26
• Tally Light ....................................26
• Tape Positioning ...........................27
• Microphone...................................27
• Viewfinder Playback and
Playback Features
• Viewfinder Playback ...............52-53
• Playback Features....................52-53
• Stop-Action Pause................52-53
• Visual Searching ..................52-53
• Automatic Iris and White
• Playback on TV (or VCR) Using
Balance.....................................27
AUDIO/VIDEO IN Jacks ..54-55
• Flying Erase Head.........................27
• Date and Time Displays ..........28-30
• Electronic Viewfinder...................31
• Displays in Viewfinder............32-33
• SCENE SELECT AE Modes..........34
• Backlight.......................................35
• Zooming .......................................36
• Fading In and Out of Scenes.........37
• Focusing Your Camcorder.......38-39
Trouble Checks.............................56-57
Care and Maintenance.................58-59
Specifications......................................60
Limited Warranty..............................61
Index (Alphabetical).....................62-63
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
We invite you to take a look at some great ideas for sparking creativity and adding to
the fun of using your 8mm camcorder. These pages have a selection of accessories to
help make your memorable moments look and sound even better.
These accessories are designed to make the process of recording and watching your
videos more enjoyable.
To order accessories, contact your local Dealer.
If a dealer is not nearby, all accessories are available through toll-free ordering or by
using the order form on page 5.
AC025A Soft Carrying Case
VCC1000 Video Color Control Center
The VCC1000 is two accessories in one.
The color control center allows you to
adjust the color intensity, tint, white
balance, and sharpness of tapes being
dubbed. This is especially helpful when
the original tape was produced in poor
lighting conditions or poor color settings.
The second feature – the character
generator – lets you create titles that can
be recorded on your tapes. This lets you
add a professional and/or personal touch
to your home videos.
Custom compact soft case designed
especially to provide protection and utility
for your 8mm camcorder and most
accessories. Rugged fabric lined with soft
non-abrasive material and generous
padding. Has three outside pockets with
storage for lens filters, adapters, batteries,
and tapes.
All specifications and descriptions of accessories are subject to change without notice.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories (continued)
1CVA356 Car Cord Adapter/Charger
AV608, AV8MM, and AV8MSH —
Rechargeable Batteries
AC POWER ADAPTER AA-EIN
DC
OUT
POWER CHARGE
7.5V
1.6A
Caution: Do not use any other car cord
adapter/charger with this camcorder.
This car cord adapter/charger lets you
operate your camcorder from a car, truck,
or RV by plugging it into the vehicle’s
cigarette lighter socket. It will also
charge the battery supplied with your
camcorder or the AV8MM or AV8MSH
long play batteries.
These rechargeable nickel-cadmium
batteries are specifically designed for
long life.
It is specially designed to convert power
from a 24-volt or 12-volt battery to
operate the camcorder.
AV608 — 1 hour 10 minutes
AV8MM — 1 hour 40 minutes
AV8MSH — 2 hours 20 minutes
The length the battery powers the
camcorder depends on how much you
use zoom and pause. All three batteries
can be recharged with the AC
adapter/charger that came with your
camcorder.
AH25 Y- Adapter
This Y-adapter let’s you connect your
camcorder’s mono audio cable to a stereo
TV or VCR.
All specifications and descriptions of
accessories are subject to change
without notice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories (continued)
AC088 Tripod
This tripod’s fluid-effect head provides smooth camera pan and tilt. The grooved,
tubular 3-section leg design folds down to 26" when not in use and weighs only 4 lbs.
Rubber feet allow for sure footing.
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCE
NE SELE
CT
REC
VCR
AUTO
Cautions: Before using a tripod, make sure it is stable enough to hold the camcorder without
falling over.
When attaching your camcorder to a tripod, be careful not to force its screw into the
camcorder’s mounting hole.
The tripod screw should not protrude into the camcorder more than approximately three-eighth
(3/8) inch. Forcing the screw could damage the mounting hole on the bottom of the camcorder.
All specifications and descriptions of accessories are subject to change without notice.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
Order Form for Camcorder Model Pro809
Description
Soft Camcorder Case
Tripod
Part No. Price
AC025A $ 59.95
Qty. Total
AC088
AH25
$ 39.95
1.95
$ 49.95
Y-Adapter
$
Rechargeable Battery (1 Hr. 10 Mins) AV608
Rechargeable Battery (1 Hr. 40 Mins) AV8MM $ 59.95
Rechargeable Battery (2 Hrs. 20 Mins) AV8MSH $ 79.95
Video Color Control Center
Car Adapter/Charger
Power Connector
Audio/Video Cable
Replacement Remote
Shoulder Strap
VCC1000 $ 349.00
1CVA356 $ 79.95
210922
210923
221307
221308
$ 21.50
$ 10.00
$ 39.95
$ 22.95
AC Adapter/Charger
1CVA153 $ 79.95
Prices are subject to change without notice.
Total Merchandise ($10 Minimum Order)......................$__________
Sales Tax.........................................................................$__________
We are required by law to collect the appropriate
sales tax for each individual state, county, and
locality to which the merchandise is being sent.
Shipping, Handling, and Insurance.................................$
5.00
Total Amount Enclosed ................................................$__________
Use VISA or MasterCard preferably. Money order
or check must be in U.S. currency only. No COD
or cash.
• Allow 8 weeks for delivery.
• All accessories are subject to availability.
• Where applicable, we will ship a superseding model.
Please complete other side also
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form (continued)
Charge your order on your VISA
or MasterCard by
filling in below
USE YOUR CREDIT CARD
®
IMPORTANT: Copy complete account number
from your VISA card
My card expires:
s
r
r
TM
IMPORTANT: Copy complete account number
from your MasterCard
Copy Number
above your
name on
My card
expires:
MasterCard
AUTHORIZED SIGNATURE
Prices are subject to change without notice.
Print or type your name and
address clearly. This will be
your mailing label.
A complete and correct
order will save you days
of waiting.
Name:
Street:
Apt:
Zip:
City:
State:
Please make sure that both sides of this form
have been filled out completely.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form (continued)
To order accessories, contact your local Dealer.
If a dealer is not nearby, you can also follow the directions below to order by
telephone or direct-by-mail.
United States and Canada Orders
To place your order by phone, have your Visa or MasterCard ready and call the toll-
free number listed below between 8AM and 8PM Eastern Standard Time.
Use this number only to place an order for accessory items listed on this order
form.
1 – 800 – 338 – 0376
Most times your order will be shipped UPS within 72 hours of receipt. If ever it is not
possible to ship within 30 days, we will notify you with an update on your order and
an option to cancel.
To place your order by mail, detach and mail the completed order form with credit
card information, money order, or check in U.S. currency (made payable to Thomson
Consumer Electronics, Inc.) to the following address:
Video Accessories
PO Box 8419
Ronks, PA 17573
For more information on these accessories (or current prices), write to the
following address:
Video Accessories Customer Service
Thomson Consumer Electronics, Inc.
Distributor & Special Products
2000 Clements Bridge Rd
Deptford, NJ 08096-2088
International Orders
This offer is valid only in the 50 United States and Canada. For international orders,
please send your request for a price quotation (not an order) to:
International Customer Service
Thomson Consumer Electronics, Inc.
Distributor & Special Products
2000 Clements Bridge Rd
Deptford, NJ USA 08096-2088
7
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
1. Unpack the camcorder and accessories.
• Save the packing materials and box in case you ever need to ship or store your
camcorder.
• The items shown below are packed with your camcorder. If any are missing or
appear damaged, contact your dealer immediately.
Rechargeable
6-Volt Battery
TE/
TIME
NORMAL
TITLE
SD
O
FF
N/O
O
Stock No. AV608
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
WARNING: NICKEL CADMIUM
A/M FOCUS
SCE
NE SELE
CT
REC
VCR
AUTO
BATTERY MUST BE DISPOSED
OF PROPERLY.
Camcorder: Model Pro809
Caution: Do not use this
adapter/charger for any other
purpose other than charging the
AV608, AV8MM, or AV8MSH
battery pack or supplying power
to the camcorder.
Power Connector
Stock No. 210922
AC Adapter/Charger
Stock No. 1CVA153
Remote Control
Stock No. 221307
Shoulder Strap
Stock No. 221308
Audio/Video Cable
Stock No. 210923
Cautions: Lithium cell batteries. Must be disposed of
properly. Never handle punctured or leaking cells. May
cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury
if swallowed. If swallowed, consult a physician
immediately for emergency treatment.
The lithium cell used in this device may explode resulting in
a fire or chemical burn if mistreated. Do not recharge,
disassemble, heat above 212˚F (100˚C), or incinerate.
Lithium Cell Batteries
for Remote and Clock
3-Volt Micro Lithium Cell
Batteries. Replace only with
Duracell No. DL2025 –
available from most local drug
stores. Use of other cells may
present a risk of fire or
explosion.
Never use metallic tweezers to hold the cell, and never short
circuit the + and – sides of the cell.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
2. Attach a power supply.
A. Adapter/Charger
To AC
100-240V,
50/60Hz.
Power
Connector
DC OUT Jack
POWER Indicator
1. Plug in adapter/charger. The adapter/charger’s POWER
indicator will light.
2. Connect power connector’s cable to DC OUT jack on
adapter/charger.
3. Hold power connector flush against camcorder and slide in
direction of arrow.
B. Charged Battery*
1. Make sure camcorder’s
CAMERA/OFF/VCR
switch is in OFF.
2. Align battery with
camcorder. Hold battery
flush against camcorder,
and slide in direction of
arrow.
Charged Battery
Attached to
Camcorder
Details are on
pages 19-21.
*Battery must be charged before it can be
used the first time.
(continued on next page)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
TAPE EJECT
Tape Window
Safety Tab
Cassette Door
PUSH
PUSH Here to Close
TAPE
EJECT
O
Lens Cap
Attached to Clip
Hand Strap
CAMERA/OFF/VCR Switch
Thumb Trigger
3. Insert a cassette.
6. Place the CAMERA/OFF/
1. Slide TAPE EJECT to open the
VCR switch to CAMERA.
The camcorder will enter record pause
and STBY will appear in the
viewfinder.
cassette compartment.
2. Fully insert cassette with tape
window facing out and safety tab
facing up.
The CAMERA/OFF/VCR switch tells
the camcorder whether you want to
record (CAMERA), play back tapes
(VCR), or turn off the camcorder’s
power (OFF).
3. Gently close compartment door by
pressing on area marked PUSH.
Details are on page 25.
4. Adjust handstrap.
Some of the controls operate
differently depending on the position
of the CAMERA/OFF/VCR switch.
1. Unsnap handstrap cover.
2. Insert your right hand and adjust
strap to fit.
Important Note: The DEW indicator will
flash in the viewfinder when there is
excessive moisture in the camcorder.
When the DEW indicator stops flashing,
the camcorder is ready to operate.
3. Snap handstrap cover shut.
5. Remove lens cap and attach it
to the clip on the handstrap.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
Eyepiece Focus Control
Tally Light
Electronic Viewfinder in
Operating Position
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
D•S•E
OU
A/M FOCUS
AUTO
SCENE SELECT
REC
VCR
SCENE SELECT AE Dial
7. Make sure SCENE SELECT
AE dial is in AUTO.
9. Start and stop recording.
Start and stop recording by pressing
and releasing the thumb trigger. You
do not have to hold the thumb trigger
to record.
The camcorder will adjust focus
automatically and the shutter speed is
set to 1/60 second.
The tally light will light and REC will
appear in the viewfinder. when the
camcorder is recording.
8. Rotate viewfinder and adjust
eyepiece focus control for
your vision.
Notes: If you do not record within five
minutes, the camcorder will automatically
shut off to prevent excessive tape wear. If
this happens, press the thumb trigger to
turn on the camcorder.
1. Rotate viewfinder into a
comfortable viewing position.
2. If the image in the viewfinder is
blurry, adjust the eyepiece focus
control for your vision.
Any material recorded on the tape will
automatically be erased if you record
over it.
Details are on page 31.
(continued on next page)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
10. Play back what you have recorded.
1. Press thumb trigger to stop recording.
2. Place CAMERA/OFF/VCR in VCR.
3. Press 55 /EDIT – to rewind the tape.
4. Press 6/FADE to play back the tape in the viewfinder.
5. Press /B.LIGHT when you are finished.
6. Details on viewfinder playback are on pages 52-53.
11. Review camcorder’s operating controls.
Eyepiece Focus Control
Electronic Viewfinder
Power Zoom Buttons
T = Telephoto
W = Wide Angle
Remote Control Sensor
Tally Light
Microphone
TE/
TIME
Manual Focus
Ring
NORMAL
TITLE
OSD
ON/OFF
BATT EJECT
Button
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/V IN OUT
Switch
A/M FOCUS
REC
Lens
SCENE SELECT
VCR
AUTO
/B.LIGHT Button
66 /EDIT + Button
6/FADE Button
55 /EDIT – Button
II/D.S.E. (Digital Special Effects) Button
A/M FOCUS/VCR REC Button
SCENE SELECT AE Dial
12
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
11. Review camcorder’s operating controls. (continued)
DATE/TIME/NORMAL/TITLE Switch
Switch Position
Function of Buttons
1
2
3
4
ON/OFF
SET
+
Displays and removes date/time display in viewfinder
Sets the date and time digits
Enters the date and time digits
DATE/
TIME
NORMAL
TITLE
–
Enters the date and time digits
1
2
3
4
OSD
Turns on-screen displays on or off
DATE/
TIME
Z/MEMORY Turns zero memory feature on or off
RESET
NORMAL
TITLE
Resets the time counter
No Function
1
2
3
4
ON/OFF
SET
CHAR+
CHAR –
Displays and removes title display in viewfinder
Sets the title characters
Enters characters for title
DATE/
TIME
NORMAL
TITLE
Enters characters for title
DATE/TIME/NORMAL/
TITLE Switch
DATE/
–
SET ON/OFF
(See chart above for functions of
1, 2, 3, and 4 buttons depending
on position of switch.)
TIME
1
3
4
2
NORMAL
TITLE
RESET Z/MEMORY OSD
CHAR– CHAR+ SET
ON/OFF
Accessory
Shoe
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
ART
A/M FOCUS
VCR REC
SCENE SELECT
AUTO
AUDIO
VIDEO
DC
AUDIO, VIDEO, and DC Jacks
(Located behind small cover)
(continued on next page)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
11. Review camcorder’s operating controls. (continued)
BRIGHT and FOCUS Controls
(See “Trouble Checks” for details.)
Eyepiece Release Switch
PUSH Here to Close
Cassette Door
PUSH
TAPE
EJECT
Lens Cap
Clip
TAPE EJECT Switch
Attach a Power
Supply Here:
Adapter/ Charger,
Charged Battery,
or Optional Car
Cord
Shoulder Strap
Attachment Ring
Handstrap
Lens Cap
CAMERA/OFF/VCR Switch
Shoulder Strap
Attachment Ring
Thumb Trigger
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Install Remote Battery Cell
Pin Hole
Battery Cell Holder
1.
2.
3.
Back
of
Replace
Battery
Cell
Lithium Cell Battery
With Positive (+)
Terminal Up
+
Remote
Holder
1. Turn remote over and insert a pin or
straightened paper clip in the pin hole
to remove the battery holder.
Cautions: Lithium cell battery. Replace
only with Duracell No. DL2025. Use of
other cells may present a risk of fire or
explosion. Must be disposed of properly.
Never handle a punctured or leaking cell.
May cause burns or personal injury.
2. Insert battery cell in battery holder so
positive (+) terminal faces up.
3. Replace battery holder.
Keep out of the hands of children. Can
cause death or injury if swallowed. If
swallowed, consult a physician immediately
for emergency treatment.
Notes: Never place anything heavy on top of
the remote or lay it upside down.
Replace battery when camcorder fails to
respond to remote.
The lithium cell used in this device may
explode resulting in a fire or chemical burn if
mistreated. Do not recharge, disassemble,
heat above 212˚F (100˚C), or incinerate.
Remove the battery from the remote if it will
not be used for a month or more. This will
prevent possible damage from battery
leakage. If leakage occurs, wipe up the liquid
inside the compartment and replace
the battery.
Never use metallic tweezers to hold the cell,
and never short circuit the + and – sides of
the cell.
Remote Sensor
Remote Sensor
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCE
NE SELE
CT
REC
VCR
AUTO
The remote operates the camcorder by
infrared light, so it is protected from
electrical and sound interference.
Note: The camcorder may not respond to the
remote control if the camcorder’s remote
sensor is exposed to direct sunlight or strong
artificial light.
However, the remote must be aimed
directly at the camcorder’s remote
sensor. There cannot be any obstructions
between them.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
Location and Function of Remote Buttons
A brief description of the functions of the remote buttons is given here. Some buttons
perform the same function as the corresponding controls on your camcorder. You can
use whichever is more convenient at the time.
Note: An RCA VCR that is set to respond to VCR 2 on the VCR’s remote may respond to this
remote when it is used to operate the camcorder.
CAMERA
RECORD
PAUSE
F.FWD
CAMERA RECORD/STANDBY
PAUSE
STANDBY
PLAY
SCAN
STOP
PLAY
55REW (Rewind)/SCAN
STOP
W
REW
ZOOM
ZOOM W and T
T
DISPLAY
DISPLAY
VCR REC (Record)
VCR REC
TITLE
TITLE ON/OFF
ON/OFF
66F.FWD (Fast Forward)/SCAN
CAMERA RECORD/STANDBY (Same
66F.FWD (Fast Forward)/SCAN
as Thumb Trigger on Camcorder)
• Press and hold 66F.FWD/SCAN
(CAMERA/OFF/VCR in CAMERA) to
visually search the recorded material
forward. Release 66F.FWD/SCAN to
record at that point on the tape.
• Press and release CAMERA
RECORD/STANDBY (CAMERA/OFF/
VCR in CAMERA) to start and stop
recording.
• Press 66F.FWD/SCAN
(CAMERA/OFF/VCR in VCR) to fast
forward the tape.
DISPLAY
• Press DISPLAY to turn the viewfinder
• Press and hold 66F.FWD/SCAN during
playback (CAMERA/OFF/VCR in
VCR) to visually search the tape
forward at a high speed. Release
66F.FWD/SCAN to return to normal
playback.
displays on or off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
PAUSE
STOP
• Press PAUSE during playback to stop
the tape for stop-action viewing.
• Press STOP (CAMERA/OFF/VCR in
VCR) to stop playback, rewinding, or
fast forwarding.
• Press PAUSE again to return to normal
playback.
• STOP has no effect when
CAMERA/OFF/VCR switch is in
CAMERA. To stop recording, press
CAMERA RECORD/STANDBY.
• Details on pages 52-53.
PLAY
• Press PLAY when the camcorder’s
CAMERA/OFF/VCR switch is in VCR
to begin playback.
TITLE ON/OFF
• Press TITLE ON/OFF to display and
remove the titler graphics in the
viewfinder.
55REW (Rewind)/SCAN
• Press and release 55REW/SCAN
quickly (CAMERA/OFF/VCR in
CAMERA) to view the last three
seconds of recorded material.
VCR REC (Record)
• Press VCR REC (CAMERA/OFF/VCR
in VCR) to record on the camcorder
from the audio/video jacks.
• Press and hold 55REW/SCAN
(CAMERA/OFF/VCR in CAMERA) to
visually search the recorded material in
reverse. Release 55REW/SCAN to
record at that point on the tape.
ZOOM (W and T)
• Press and hold W ZOOM to move the
lens in the wide-angle direction.
• Press 55REW/SCAN (CAMERA/OFF/
VCR in VCR) to rewind the tape.
• Press and hold T ZOOM to move the
lens in the telephoto direction.
• Press and hold 55REW/SCAN during
playback (CAMERA/OFF/VCR in
VCR) to visually search the tape in
reverse at a higher speed. Release
55REW/SCAN to return to normal
playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger’s power connector attaches to the camcorder, and lets you
power your camcorder directly from standard household power. The
adapter/charger operates on 100-240 volts, 50/60 Hz.
DC OUT
Jack
To AC
100-240V,
50/60 Hz
BATT
EJECT
CAMERA/OFF/VCR
Switch
Adapter/Charger
To Remove the Adapter/Charger
To Attach the Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
1. Make sure CAMERA/OFF/VCR is in
OFF.
2. Press and hold BATT EJECT while
sliding the power connector to the left
and off the camcorder.
2. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz). Adapter/charger’s POWER
indicator will light.
3. Connect power connector’s cable to
Using an Optional Plug Adapter
DC OUT jack on adapter/charger.
An optional plug adapter may be required
in some countries.
4. Hold power connector flush against
camcorder and slide it to the right as
shown.
Optional AC
Plug Adapter
AC 200-240V
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into an
AC outlet.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Using the Battery to Power Your Camcorder
The battery must be charged before it can be used the first time. Initial charging will
take approximately one hour. When fully charged, the battery should supply about
45-55 minutes of operating time (depending on how much you use zoom and pause).
Note: Use the small marker switch on the top of the battery as a reminder to help you remember
to recharge the battery. It has no other function.
Caution: When
a battery is
Marker
Switch
CHARGE
Indicator
attached to the
adapter/ charger,
do not turn the
adapter/charger
upside down.
The battery may
fall off and be
damaged or
CHARGE
POWER
POWER
Indicator
To AC Wall Outlet
100-240V, 50/60 Hz
cause injury.
Charging the Battery
If the power connector is attached to the adapter/charger, remove its plug.
POWER will also flash if a hot battery is
1. Plug the adapter/charger into the
nearest AC outlet (100-240V,
50/60Hz).
attached to the adapter/charger. Attaching
an extremely hot battery is not
recommended. Allow it to cool down
before attaching it.
2. Place the battery on the adapter/
charger, and press it in place.
4. Slide the charged battery off the
adapter/charger and attach it to the
camcorder as shown on the next page.
3. The adapter/charger’s CHARGE
indicator will light.
When the CHARGE indicator turns
off, the battery is fully charged.
If POWER on the adapter/charger starts
flashing, remove the plug from the outlet
for about 30 seconds. Then reattach it. If
after several attempts, POWER continues
to flash, your battery cannot take a charge
and must be replaced.
(continued on next page)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Using the Battery to Power Your Camcorder (continued)
CAMERA/OFF/VCR Switch
BATT EJECT
To Attach Battery
Battery Safety Precautions
Do not short the battery’s terminals.
If the power connector is attached to the
camcorder, remove it before attaching the
battery.
Do not attempt to disassemble or
modify the battery. There are no user-
serviceable parts inside.
• Hold the battery flush against the
camcorder and slide it to the right as
shown.
Use the battery only with specified
adapter/chargers and camcorders.
Make sure it is firmly attached to the
camcorder.
Throwing the battery into a fire or
exposing the battery to excessive heat –
over 149º F (65º C) could be hazardous.
Remove the Battery
Press and hold BATT EJECT while
sliding the battery to the left and off the
camcorder.
ATTENTION: THE PRODUCT THAT YOU HAVE
PURCHASED USES A RECHARGEABLE BATTERY. AT
THE END OF ITS USEFUL LIFE, UNDER VARIOUS STATE
AND LOCAL LAWS, IT MAY BE ILLEGAL TO DISPOSE OF
THIS BATTERY INTO THE MUNICIPAL WASTE STREAM.
Ni - Cd
CHECK WITH YOUR LOCAL SOLID WASTE OFFICIALS FOR DETAILS
IN YOUR AREA FOR RECYCLING OPTIONS OR PROPER DISPOSAL.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Using the Battery to Power Your Camcorder (continued)
Checking Battery Power (Battery Level Indicator)
The battery level indicator shows how much recording time is left on the battery.
This indicator will not be recorded on the tape.
Battery
Level
Indicator
Display in Viewfinder
• When the battery is fully charged, the
Caution: The camcorder will shut off
display shows
in the viewfinder.
when the battery reaches empty. The
battery should still eject the cassette
when you slide TAPE EJECT. If it does
not, do not attempt to force the cassette
compartment open. This will damage
the camcorder.
• After several minutes, the display shows
.
• When the battery level display
starts flashing, it is time to recharge the
battery.
Wait at least three seconds after
attaching the battery before inserting a
cassette.
Proper Care and Storage of Your Battery
Do not operate the battery at temperatures
below 14°F (–10°C) or above 95°F
(35°C). The battery may be damaged if
operated at temperatures above 122°F
(50°C). Operation time will decrease at
extremely low temperatures.
After repeated chargings and use, the
operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.
Charge the battery at a temperature of
32°F-95°F (0°C-35°C) to prevent
damage.
(continued on next page)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Using the Optional Thomson Car Cord Adapter/Charger
The optional 1CVA356 car cord adapter/charger allows you to power your camcorder
from the cigarette lighter socket of a car, truck, or RV. It converts 24- and 12-volts to a
6-volt output. The 1CVA356 can also charge the battery that came with your
camcorder and the (long play) batteries.
Notes: Consult instructions enclosed with the 1CVA356 for details.
The vehicle’s engine does not have to be running when using the car cord.
Optional accessories are shown on pages 2-4.
Cautions: The 1CVA356 is designed to be used only with vehicles having negative
ground electrical systems.
Do not use any other car cord. It may damage your camcorder.
Use 1CVA356 Car Cord Adapter/Charger to Charge a Battery
Cigarette Lighter Socket
APOWER ADAPTER AA-EIN
DC
OUT
POWER CHARGE
7.5V
1.6A
CHARGE Indicator
Optional 1CVA356
Car Adapter/Charger
1. If the power connector’s plug is
attached to adapter/charger, remove it.
3. The CHARGE indicator will light while
the battery is being charged. When the
CHARGE indicator turns off, the
battery is charged.
2. Attach the battery as shown.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Use 1CVA356 Car Cord Adapter/Charger to Power Camcorder
Cigarette
Lighter Socket
AC POWER ADAPTER AA-EIN
Power Connector
DC
OUT
7.5V
1.6A
POWER CHARGE
CAMERA/OFF/VCR Switch
DC
Optional 1CVA356
OUT Jack
Car Cord
Adapter/Charger
1. Slide camcorder’s CAMERA/OFF/VCR 4. Insert plug of car cord adapter/charger
switch to OFF, and remove battery if it
into vehicle cigarette lighter’s socket.
is attached.
5. Place CAMERA/OFF/VCR in
2. Hold power connector flush against the
back of camcorder and slide it to the
right as shown.
CAMERA.
3. Insert power connectors’s small plug
into DC OUT jack of car cord
adapter/charger.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Cassettes
We recommend our cassettes be used with your camcorder. Use of poor quality or
damaged tapes can contaminate the video heads, resulting in snow or no picture during
playback. Head cleaning is not covered under warranty. It is considered normal
maintenance. Playing one of our new tapes for approximately 30 minutes will often
satisfactorily clean the heads and improve your picture.
Erase Protection – Safety Tab
You can use your video cassettes over and over again. To erase a previous
recording, just record over it.
8
To Record Again
Open Safety Tab
(Red Disappears)
To Prevent Erasure
Close Safety Tab
(Expose Red)
Safety Tab
Recording and Playback Speed and Times
The camcorder records in standard speed (SP). Listed below are the maximum SP
recording times for some popular 8mm cassettes.
The camcorder plays back in standard speed (SP) and long play (LP). The camcorder
automatically selects the playback speed.
Cassette
Recording Time
P6-15
P6-20
P6-45
P6-60
P6-90
P6-120
P6-150
15 Minutes
20 Minutes
45 Minutes
60 Minutes
90 Minutes
2 Hours
2 1/2 Hours
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Cassettes (continued)
Inserting and Removing Cassettes
Tape Window
Safety Tab
Caution:
Insert the
PUSH Here to Close
cassette with
the safety tab
up and tape
window facing
out. The
cassette should
slide easily in
the compart-
ment. Do not
force it.
PUSH
TAPE
EJECT
TAPE EJECT
Button
O
Cassette Door
1. Slide TAPE EJECT to open the
3. Gently close compartment door by
cassette compartment.
pressing on area marked PUSH.
2. Fully insert cassette with safety tab
facing up and tape window facing out.
4. When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
Cassette Care and Storage
• Store cassettes vertically in their
protective cases at normal room
temperatures. Excessive heat or cold
may damage your cassettes.
• Close the safety tab to prevent
accidental erasure.
• Do not use a cassette if it has been
damaged or exposed to moisture.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
• Do not touch or cover the small holes in
the cassette or use cassettes with
damaged or spliced tape.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Features
CAMERA/OFF/VCR
Microphone
TE/
TIME
DATE/TIME/
NORMAL
TITLE
OSD
NORMAL/TITLE
ON/OFF
Tally Light
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
D•S•E
OU
A/M FOCUS
REC
SCENE SELECT
VCR
AUTO
/B.LIGHT
55/EDIT –
66/EDIT +
Display On/Off Feature
Edit Search
When the DATE/TIME/NORMAL/TITLE
switch is in NORMAL, you can turn the
normal viewfinder displays on or off.
Edit search uses 66/EDIT + or 55/EDIT
– (55REW/SCAN or 66 F.FWD/SCAN
on remote) to precisely position the tape
while the camcorder is in record pause.
• Press OSD on the camcorder (DISPLAY
on the remote) to turn the viewfinder
displays off.
• Press and hold 55/EDIT –
(55REW/SCAN on remote) to visually
search the recorded tape in reverse.
• Press the button again to turn the
viewfinder displays on.
• Press and hold 66/EDIT +
(66F.FWD/SCAN on remote) to
visually search forward on the
recorded tape.
Quick Review
Press and release 55/EDIT –
(55REW/SCAN on remote) when the
camcorder is in record pause to review
the last few seconds of a recording.
Release the button for the camcorder to
return to record pause at that point on the
tape.
The camcorder will play back the last
few seconds of the recording, return the
tape to its previous position, and return to
record pause.
Tally Light
The tally light on the front of the
viewfinder lights when the camcorder is
recording and flashes if there is an
operation warning. See “Trouble
Checks” for details.
Note: Do not press and hold 55/EDIT –
(55REW/SCAN on remote) or the camcorder
will go into edit search.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Features (continued)
CAMERA
RECORD
PAUSE
F.FWD
CAMERA
RECORD/STANDBY
STANDBY
PLAY
REW
W
ZOOM
SCAN
55 REW/SCAN
T
66 F.FWD/SCAN
STOP
DISPLAY
STOP
DISPLAY
VCR REC
TITLE
ON/OFF
Tape Positioning
Automatic Iris and White
Balance
When CAMERA/OFF/VCR is in VCR and
the camcorder is stopped, you can
quickly fast forward or rewind the tape.
The camcorder automatically adjusts
the iris and white balance for the
recording conditions.
• Press 66/EDIT + (66F.FWD/SCAN on
remote) to fast forward the tape. Press
/B.LIGHT (STOP on remote) to stop
fast forwarding.
Flying Erase Head
A separate erase head is mounted on
the spinning headwheel (hence the
term “flying”).
• Press 55/EDIT – (55REW/SCAN on
remote) to rewind the tape to the
beginning. Press /B.LIGHT (STOP
on remote) to stop rewinding.
This allows you to make clean edits
without the “glitches” or “rainbow
noise” that may occur.
Note: Press and hold the button during
rewind or fast forward to visually search the
tape. Release to continue rewinding or fast
forwarding.
Microphone
The microphone picks up the sound
during a recording. It is more sensitive to
sounds coming from the direction the
lens is pointed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Install the Lithium Cell Battery
The time indicator will flash for approximately five seconds after the
CAMERA/OFF/VCR switch is set to CAMERA when the battery needs replacing. The
cell should last approximately one year.
Clock Battery
Compartment
Clock Cell
(+ Side Facing Out)
CAMERA/OFF/VCR
Switch in OFF
1. Make sure camcorder is turned off, and
remove any power supply attached to
the camcorder.
To remove battery
To remove cell, place a non metallic
pointed object behind the cell and lift it
out of the compartment.
2. Open the clock cell compartment.
3. Insert the clock cell into the clock
compartment with the “+” terminal
facing out.
4. Close the clock cell compartment.
Cautions: Lithium cell battery. Replace only with Duracell No. DL2025. Use of
other cells may present a risk of fire or explosion. Must be disposed of properly.
Never handle a punctured or leaking cell. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed. If
swallowed, consult a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or chemical burn if
mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the + and – sides
of the cell.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display (continued)
Setting the Time and Date Display in the Viewfinder
SET
DATE/TIME/
NORMAL/
TITLE
ON/OFF
– and +
Switch in
DATE/TIME
DATE/
–
SET ON/OFF
TIME
NORMAL
TITLE
RESET Z/MEMORY OSD
CHAR– CHAR+ SET ON/OFF
CAMERA/OFF/VCR
Switch in CAMERA
(Located on other side.)
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
Make sure the lithium battery cell is installed and a power source is connected to
the camcorder.
5. Press SET. The flashing cursor will
1. Place CAMERA/OFF/VCR switch in
move to the next part of the display.
CAMERA.
6. Repeat steps 3 and 4 until you have
entered the correct month, day, year,
hour, minute, and AM or PM.
2. Place DATE/TIME/NORMAL/TITLE
switch in DATE/TIME.
3. Press SET to display a flashing cursor
7. After you select AM or PM, press SET
to remove the flashing cursor from the
viewfinder and start the camcorder’s
internal clock.
on the month.
The flashing cursor lets you know
which part of the display you are
setting.
Hours
Minutes
Correcting the Date or Time
AM or PM
To correct the date or time after the clock
has been started, place DATE/TIME/
NORMAL/TITLE switch in DATE/TIME.
Repeatedly press SET to place the
flashing cursor on the digit you want to
correct. Then enter the correct digit using
the + or – button.
12:00AM
1/1/94
Month
Day
Year
4. Press + or – to enter the correct digit.
Press and hold + or – to rapidly
advance the digits.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display (continued)
Recording Date and Time (or Date) on Your Tape
The time and date (or date only) can be recorded on your tape. Whenever one of the
displays appears in the viewfinder, it will be recorded. The DATE/TIME/NORMAL/
TITLE switch must be set to DATE/TIME.
SET
DATE/TIME/
NORMAL/
TITLE
Switch in
DATE/TIME
ON/OFF
– and +
DATE/
TIME
–
SET ON/OFF
NORMAL
TITLE
RESET Z/MEMORY OSD
CHAR– CHAR+ SET
ON/OFF
CAMERA/OFF/VCR
Switch in CAMERA
(Located on other side.)
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
Install the lithium battery cell
and set the time and date as
described on pages 28-29.
Repeatedly
Press
ON/OFF
11/18/93
1. Place CAMERA/OFF/VCR
switch in CAMERA.
Date Only
2. Place DATE/TIME/
NORMAL/ TITLE switch
in DATE/TIME.
3. Repeatedly press ON/OFF
to display the date, date
and time, or no display in
the viewfinder.
12:00AM
1/1/93
Date and Time
No Display
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic Viewfinder
The camcorder’s electronic viewfinder is a miniature black-and-white monitor that
displays the picture seen by the lens.
Tilt Adjustment
For convenient viewing, you can rotate the viewfinder about 180°.
180˚ Tilt
Caution: Do not force the
viewfinder to rotate completely
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
around. This will damage the
viewfinder and/or the camcorder.
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
U
O
A/M FOCUS
REC
SCENE SELECT
VCR
AUTO
Caution: When carrying the camcorder with the shoulder strap, rotate
the viewfinder to the front to prevent possible damage to the viewfinder
from bumping against your body as you move.
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of the viewfinder for
your personal vision. If you wear eyeglasses, you can probably operate
the camcorder without them.
Viewfinder in Operating Position
Eyepiece Focus Control
1. Attach a power supply to the
camcorder. Place the CAMERA/
OFF/VCR switch to CAMERA.
2. Rotate the viewfinder into
operating position, and adjust the
eyepiece focus control for your
vision. Focus on one of the on-
screen displays (such as the time
counter).
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
D•S•E
OU
A/M FOCUS
REC
SCENE SELECT
VCR
AUTO
The eyepiece focus control does
not affect the focus of the picture
actually recorded by the
camcorder.
CAMERA/OFF/VCR Switch
(Located on other side.)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays in Viewfinder
Several displays that aid in the operation of the camcorder appear in the viewfinder.
The only displays that are recorded on the tape when they appear in the viewfinder are
the title, date and time, or date only.
Manual Focus
Status Indicators
Scene Select AE
Time Counter
With Zero
Memory
Battery Level
Zoom
T
REC 0:00:00
DEW MEM
5 PORTRAIT
M.FOCUS
DSE1
TAPE END
W
DEW
Digital
Special
Effects
CONGRATULATIONS
KARL AND CHASE
TAPE END
Title
12:00 AM
11/11/94
Time and Date
Viewfinder Displays
Battery Level Indicator
Manual Focus Indicator
This indicator shows the amount of time
left for the rechargeable battery. Details
are on page 21.
Press A/M FOCUS to turn auto focus on
and off.
• M.FOCUS appears when manual
focus is turned on.
DEW Indicator
• No indicator appears when auto focus
is turned on.
DEW flashes when there is excessive
moisture in the camcorder. Remove the
cassette and leave the cassette
SCENE SELECT AE Indicators
compartment open for at least two hours.
When DEW stops flashing, the
camcorder is ready to operate.
The indicator for the mode selected with
the SCENE SELECT AE dial appears
here. No indicator appears when the dial
is set to AUTO. Details are on page 34.
Digital Special Effects
The mode selected with the D•S•E button
appears here. Details are on page 40.
32
(continued on next page)
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays in Viewfinder (continued)
Status Indicators
Time Counter With Zero Memory
The following status displays appear to
let you know what the camcorder is
doing.
Repeatedly press OSD when
TIME/DATE/NORMAL/TITLE is in
NORMAL to display the time counter.
• REC appears during recording.
• PAUSE appears during record pause.
• STBY appears during record pause.
• PLAY appears during playback.
• FF appears during fast forward.
• REW appears during rewind.
• Press Z/MEMORY to turn zero
memory on or off. MEM appears
below the time counter when zero
memory is turned on.
• Details are on pages 41 and 44-47.
Title
Repeatedly press ON/OFF when
TIME/DATE/NORMAL/TITLE is in
TITLE to display the title.
• STOP appears when the camcorder is
stopped.
TAPE and TAPE END Displays
• The title will be recorded whenever
it appears in the viewfinder.
• TAPE appears when you try to record
and the cassette’s safety tab has been
closed.
• Details are on pages 42-43.
• TAPE flashes when there is no cassette
Zoom
in the camcorder.
The zoom indicator shows the position of
the motorized zoom lens. T indicates
telephoto and W indicates wide angle.
• TAPE END flashes when there is
approximately five minutes of
recording time left on the cassette.
• TAPE END appears during playback
when the end of the cassette is
reached.
Time and Date
Repeatedly press ON/OFF when the
TIME/DATE/NORMAL/TITLE switch is
in TIME/DATE to display the time and
date or date only.
• These displays will be recorded on the
tape whenever they appear in the
viewfinder.
• Details are on pages 28-30.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SCENE SELECT AE Modes
The SCENE SELECT AE dial lets you select four different recording modes. Turn the
dial to select the mode for the effect you want. The indicator for the mode you select
will appear in the viewfinder. Set the dial to AUTO for normal recording.
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
SCENE SELECT AE Dial
AUTO
Indicator
Uses
Mode
AUTO
None
Use for normal recording. The shutter speed is set to
1/60 second.
Sports
SPORTS
PORTRAIT
HSS
Use to record fast moving action with less blurring
when you plan on playing back the recording on a
VCR using special effects, such as pause and slow
motion. Shutter speed is automatically selected
between 1/60 and 1/250 second.
Portrait
Use to record a still subject – such as a person or
flower, when zooming in, or when there is something
between the camcorder and subject. Reduces depth-
of-field so background becomes blurry while subject
remains clearly focused. Focus is locked in auto.
High-Speed
Shutter
Use outdoors and in well-lit situations to record fast-
moving action with less blurring when you plan on
playing back the recording on a VCR using special
effects, such as pause and slow motion. Can capture
faster action than sports mode. Shutter speed is
automatically selected between 1/250 and 1/1000
second.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Backlight
Use this feature to record a subject that is darker than the surrounding scene.
B.LIGHT
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
To Add More Light
Press and hold B.LIGHT to add more light
when recording:
• A subject that has a light source
behind them.
Release B.LIGHT when the light
conditions change.
• A subject that is standing in a
shadowed area.
• A subject that is is standing in front
of a window.
• A subject that is is wearing white
clothing standing in front of a white
background.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming
The motorized zoom lens allows you to zoom in or out by pressing a button.
Power Zoom Buttons
W
T
=
=
Wide Angle
Telephoto
CAMERA
RECORD
PAUSE
F.FWD
STANDBY
PLAY
SCAN
STOP
W
REW
ZOOM
ZOOM Buttons
PUSH
T
DISPLAY
TAPE
EJECT
VCR REC
TITLE
O
ON/OFF
Using Power Zoom Buttons
T
5
W
• Press “W” to move the lens in the wide-
angle direction.
• Press “T” to move the lens in the
telephoto (close-up) direction.
The zoom indicator appears in the
viewfinder.
Zoom Indicator
in Viewfinder
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Fading In and Out of Scenes
You can add a professional touch to your recordings when you fade in and out of
scenes. Both the picture and sound will gradually appear or disappear. The speed of
the fade is automatically controlled by the camcorder.
FADE
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
Fade In
Fade Out
1. Place the camcorder in record pause.
2. Press and hold FADE.
1. During recording, press and hold
FADE until the picture fades out.
2. Press the thumb trigger to stop
recording.
3. Simultaneously press the thumb
trigger to start recording and release
FADE.
The picture and sound will gradually
fade out.
The picture and sound will gradually
fade in.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing Your Camcorder
Power Zoom Buttons
“T ” and “W”
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
IN
D•S•E
EDIT–
OU
A/M FOCUS
REC
SCENE SELECT
VCR
AUTO
SCENE SELECT AE Dial
A/M (Automatic/Manual) FOCUS
Auto Focus
Auto focus will operate on the telephoto
“T” side from approximately 3.6 feet to
infinity.
The camcorder will focus automatically
whenever does not appear in
M.FOCUS
the viewfinder.
Auto focus will operate on the wide-
angle “W” side 3/8 inches from the lens
surface to infinity
• If M.FOCUS appears, press A/M
FOCUS to turn on auto focus.
The camcorder will automatically focus
on the subject in the center of the
viewfinder.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing Your Camcorder (continued)
Manual Focus
To maintain proper focus throughout
the zoom range, zoom in on your
subject before adjusting the focus.
Under certain conditions, such as those
listed below, you may need to focus
manually.
3. Turn the focus ring until the subject is
clearly focused.
1. Press A/M FOCUS to turn on manual
focus. M.FOCUS appears in the
viewfinder.
4. When you are finished, press A/M
FOCUS to turn on auto focus.
2. Press zoom button T to zoom in on
disappears from the
your subject.
M.FOCUS
viewfinder.
Conditions that May Require Manual Focus
The following conditions may require the use of manual focusing during recording.
•
• Subjects with shiny surfaces or sharp
angles.
When a subject has a close foreground
and a background far away.
• Recording in snow, fog, or other low-
light situations.
• When two subjects at different
distances overlap.
• Recording through a window.
• Recording using accessory lens.
• A subject with distinct horizontal
stripes, low contrast, or small pattern.
• A subject not in the center of the
viewfinder.
Macro Focus
The macro-focus feature lets you focus on objects as close as 3.9 inches from the
camcorder lens in full wide angle position.
1. Make sure M.FOCUS does not appear
in the viewfinder. If it does, press A/M
FOCUS to remove it.
Notes: Zooming is not possible when using
macro focus. To change the size of the
subject, move the camcorder’s lens closer or
farther away from it.
2. Press and hold zoom button “W” until
For best results, increase illumination when
recording using macro focus.
the lens is completely zoomed out.
3. Position the subject in the center of the
viewfinder.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Special Effects
The digital special effects feature lets you select one of three digital effects while
recording.
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
DSE1
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
D•S•E (Digital
Special Effects)
Digital Special Effects
Indicator in Viewfinder
To Use Digital Special Effects
1. Place CAMERA/OFF/VCR in
CAMERA.
2. Press D•S•E to give the picture you
are recording a digital effect. DSE1
appears in the viewfinder.
3. Press D•S•E again to increase the
digital effect of the picture you are
recording. DSE2 appears in the
viewfinder.
4. Press D•S•E again to add even more
digital effects to the picture you are
recording. DSE3 appears in the
viewfinder.
5. Press D•S•E to return to normal
recording. No indicator appears in the
viewfinder.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Counter
The time counter shows actual time elapsed when recording or playing back a
tape. It helps you quickly locate the end of recorded segments.
DATE/TIME/NORMAL/TITLE in NORMAL
DATE/
TIME
–
SET ON/OFF
CAMERA
RECORD
PAUSE
F.FWD
NORMAL
TITLE
STANDBY
RESET Z/MEMORY OSD
PLAY
SCAN
STOP
55REW/
SCAN
W
REW
CHAR– CHAR+ SET
ON/OFF
ZOOM
T
RESET
Z (Zero)/MEMORY
OSD
DISPLAY
STOP
DISPLAY
VCR REC
TITLE
ON/OFF
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
66 F.FWD/SCAN
CAMERA/OFF/
VCR Switch
(Located on
Other Side)
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
D•S•E
OU
A/M FOCUS
REC
SCENE SELECT
VCR
AUTO
/B.LIGHT
55/EDIT –
66/EDIT +
4. Insert the cassette, and press
55/EDIT – (55 REW/SCAN on remote)
to rewind the tape.
To Use Time Counter
1. Place CAMERA/OFF/VCR in VCR.
2. Place DATE/TIME/NORMAL/TITLE in
NORMAL.
5. Press RESET to reset the time counter
to 0:00:00.
3. Press OSD (DISPLAY on remote) to
display the time counter in the
viewfinder.
6. Press 66/EDIT + (66 F.FWD/SCAN
on remote) and fast forward the tape
until the time counter reads the amount
of time of your recorded segment. For
example, 0:10:00 will appear for ten
minutes.
Minutes
Hours
Seconds
7. Press /B.LIGHT (STOP on remote)
to stop the tape. This is the
0:00:00
approximate end of your recording.
8. Press OSD to remove the time counter
from the viewfinder.
Time Counter
In Viewfinder
Notes: If you rewind the tape farther back
than a counter reading of “0:00:00”, a minus
will appear in front of the counter.
It will not be recorded on the tape.
The time counter is automatically reset to
“0:00:00” each time a cassette is inserted.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Titler
The title can be displayed and recorded at any time. The built-in character register
contains 47 characters for creating titles on two lines with up to 16 characters per line.
DATE/
TIME
–
SET ON/OFF
DATE/TIME/NORMAL/
NORMAL
TITLE
TITLE in TITLE
RESET Z/MEMORY OSD
CHAR– CHAR+ SET
ON/OFF
CHAR (Character)
– and +
SET
ON/OFF
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
CAMERA/OFF/VCR Switch
(Located on Other Side)
B.LIGHT
FADE
EDIT+
A/V
IN
D•S•E
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
Creating a Title
If you want to delete a character, press
CHAR + or CHAR – until the blank space
appears.
1. Attach a power source and place
CAMERA/OFF/VCR in CAMERA.
2. Place DATE/TIME/NORMAL/TITLE
7. Press ON/OFF to store the title and
remove it from the viewfinder when
you are finished.
in TITLE.
3. Press SET to move the flashing cursor
to the place you want to begin.
4. Select the first character by pressing
CHAR + or CHAR – until the character
you want appears. See the “Chart of
Characters” on the next page for the
characters available in the titler’s
register.
Important Note: Place TIME/DATE/
NORMAL/TITLE in NORMAL to remove the
titler graphics from the viewfinder for normal
recording.
Delete a Title
5. After you have selected the first
character, press SET to move the
flashing cursor to next position.
Display the title and press SET to place
the cursor over the character you want to
delete. Then press CHAR + or CHAR –
to enter the blank space (-). Press SET to
place the cursor over the next character
you want to delete and enter the blank
space (-). Continue until all the
6. Repeat steps 4 and 5 until you have
completed the title.
Note: To correct a character, press SET to
place the cursor over it and then press
CHAR + or CHAR – to enter the correct
character.
characters are deleted.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Titler (continued)
CAMERA
RECORD
PAUSE
F.FWD
CAMERA
RECORD
/STANDBY
STANDBY
PLAY
SCAN
STOP
W
REW
ZOOM
T
DISPLAY
VCR REC
TITLE
TITLE ON/OFF
ON/OFF
Recording Titles on a Tape in the Camcorder
1. Attach a power source and place
4. Press ON/OFF (TITLE ON/OFF on
remote) to display the title in
viewfinder.
CAMERA/OFF/VCR in CAMERA.
2. Locate the place on the tape where you
want to record the title.
5. Press the thumb trigger (CAMERA
RECORD/STANDBY on remote) to
start recording the title.
Note If you record a title on a pre-
recorded tape, the audio and video will be
erased where the title is inserted. There
will also be a three-to-four second pause of
blank tape before the existing audio and
video return.
6. Press ON/OFF to remove the titler
graphics from the viewfinder. The
camcorder will now record as normal.
If you do not want to continue
3. Place DATE/TIME/NORMAL/TITLE
recording, press the thumb trigger
(CAMERA RECORD/STANDBY on
remote) to stop recording.
in TITLE.
Chart of Characters in Titler’s Register
A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ? ’ –
; : < >
. / , ! Blank Space (–)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Insert Using the Camcorder
Edit insert lets you record new audio and video from the camcorder to a previously
recorded tape in the camcorder.
DATE/TIME/NORMAL/TITLE in NORMAL
DATE/
TIME
–
SET ON/OFF
NORMAL
TITLE
RESET Z/MEMORY OSD
CHAR– CHAR+ SET
ON/OFF
RESET
Z(Zero)/MEMORY
OSD
CAMERA/OFF/
VCR Switch
(Located on
Other Side)
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
IN
D•S•E
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
/B.LIGHT
66/EDIT +
55/EDIT –
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Insert Using the Camcorder (continued)
CAMERA
RECORD
PAUSE
F.FWD
CAMERA
RECORD/STANDBY
STANDBY
PLAY
SCAN
STOP
W
REW
ZOOM
55 REW/SCAN
T
DISPLAY
66 F.FWD/SCAN
DISPLAY
VCR REC
TITLE
ON/OFF
1. Place CAMERA/OFF/VCR in
CAMERA.
Minutes
Hours
Seconds
2. Press 55/EDIT – or 66/EDIT +
(55REW/SCAN or 66 F.FWD/SCAN
on remote) to locate the place you
want the insert to end.
0:00:00
MEM
3. Place DATE/TIME/NORMAL/TITLE
in NORMAL.
Time Counter with Zero
Memory Turned On
4. Press OSD (DISPLAY on remote) to
display the time counter in the
viewfinder.
5. Press RESET to set the time counter
to 0:00:00.
8. Press the thumb trigger on the
camcorder (CAMERA
RECORD/STANDBY on remote) to
start recording the new insert.
6. Press 55/EDIT – (55REW/SCAN on
remote) to locate the place you want
the insert to start.
The camcorder will stop recording at
the zero memory point.
7. Press Z/MEMORY to turn on zero
memory and store the insert ending
point in memory. MEM flashes under
the time counter.
Notes: Zero memory is cancelled when insert
recording is complete.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Insert from A Monitor TV or VCR
Edit insert lets you record new audio and video from the camcorder or another source,
such as a TV or VCR, to a previously recorded tape in the camcorder. You will need
the audio/video cable that came with your camcorder.
RESET Z/MEMORY
PAUSE
PLAY
CAMERA
RECORD
OSD
PAUSE
F.FWD
STANDBY
PLAY
SCAN
STOP
DATE/
TIME
–
SET ON/OFF
DATE/TIME/
NORMAL/TITLE
in NORMAL
REW
W
ZOOM
SCAN/
SCAN/
NORMAL
T
TITLE
RESET Z/MEMORY OSD
DISPLAY
VCR REC
CHAR– CHAR+ SET
ON/OFF
VCR REC
TITLE
ON/OFF
TE/
TIME
NORMAL
TITLE
CAMERA/
OSD
ON/OFF
OFF/VCR Switch
/FADE
(Located on other side)
4
A/V IN/OUT
Switch in IN
B.LIGHT
FADE
EDIT+
D•S•E
A/V
IN
/D•S•E
EDIT–
A/M FOCUS
VCR REC
SCENE SELECT
AUTO
AUDIO
VIDEO
/EDIT +
/EDIT –
VCR REC
VIDEO Jack
DC
AUDIO Jack
3
3
1
White
Audio
Plug
Audio/Video
Cable
(Supplied)
Y-Adapter
(Optional)
1
White
Audio
Plug
Audio/Video
Cable
(Supplied)
L
AUDIO
OUT
OR
AUDIO
OUT
R
VIDEO
OUT
VIDEO
OUT
2
Yellow Video Plug
2
Yellow Video Plug
Back of
Mono VCR or
TV Monitor
Back of
Stereo VCR or
TV Monitor
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Insert (continued)
Installation
1 Attach the audio/video cable’s white
plug to the AUDIO OUT jack of the
TV (or VCR).
2 Attach the audio/video cable’s yellow
plug to the VIDEO OUT jack on the
TV (or VCR).
Note: If your TV (or VCR) has stereo
AUDIO jacks, attach the white plug to the
one labeled MONO. If one is not labeled
MONO, you may need a Y-adapter, such
as AH25 shown on page 3, to hear both
channels.
3 Attach the yellow plug on the other
end of the audio/video cable to the
VIDEO jack and the white plug to the
AUDIO jack located behind the small
cover on the side of the camcorder.
4 Place the A/V (audio/video) IN/OUT
switch to IN.
To Edit Insert From a TV or Another VCR
The source for audio and video during edit insert from a TV or VCR is the signal
coming through the audio and video plugs of the audio/video cable.
If you connect only the video plug of the audio/video cable to a TV or VCR, you will
have no sound on the dubbed portion.
If you connect only the audio plug of the audio/video input cable to the TV or VCR,
the camcorder will not dub.
1. Connect the camcorder to the TV or
tape where you want edit insert to
begin, and press /D•S•E (PAUSE on
remote) to place the camcorder in play
pause where you want to begin
dubbing.
VCR as shown.
2. Place camcorder’s CAMERA/OFF/
VCR switch in VCR.
3. Insert the tape you want to insert new
audio and video on in the camcorder.
7. Press VCR REC, to place camcorder in
record pause.
4. Look into the viewfinder and use
6/FADE (PLAY on remote),
8. Press Z/MEMORY to turn on zero
memory and store the insert ending
point in memory. MEM flashes under
the time counter.
55/EDIT – and 66/EDIT +(55
REW/SCAN and 55 F.FWD/SCAN on
remote) to locate the place on the tape
where you want edit insert to end.
9. Start the other component playing.
Press /D•S•E (PAUSE on remote)
to start dubbing. The camcorder will
stop recording at the zero memory
point.
5. Make sure DATE/TIME/NORMAL/
TITLE switch is in NORMAL, and
press RESET to reset the time counter
to 0:00:00.
6. Use 6/FADE (PLAY on remote), then
55/EDIT – (55 REW/SCAN on
Note: Zero memory is cancelled when insert
recording is complete.
remote) , to locate the place on the
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from VCR or TV Monitor
To connect your camcorder to a TV (or VCR) with AUDIO and VIDEO OUT jacks, you
will need the audio/video cable that came with your camcorder. If your TV is already
connected to a VCR, you can attach the camcorder to the VCR and watch what the
camcorder is recording on the TV.
CAMERA
PAUSE
RECORD
STANDBY
PLAY
SCAN
STOP
REW
F.FWD
W
ZOOM
T
STOP
DISPLAY
VCR REC
VCR REC
TITLE
ON/OFF
TE/
TIME
/B.LIGHT
NORMAL
TITLE
CAMERA/
OSD
ON/OFF
OFF/VCR Switch
(Located on other side)
4
A/V IN/OUT
Switch in IN
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
D•S•E
A/M FOCUS
SCENE SELECT
VCR REC
AUTO
AUDIO
VIDEO
DC
VCR REC
VIDEO Jack
AUDIO Jack
3
3
1
White
Audio
Plug
Audio/Video
Cable
(Supplied)
Y-Adapter
(Optional)
1
White
Audio
Plug
Audio/Video
Cable
(Supplied)
L
AUDIO
OUT
OR
AUDIO
OUT
R
VIDEO
OUT
VIDEO
OUT
2
Yellow Video Plug
2
Yellow Video Plug
Back of
Mono VCR or
TV Monitor
Back of
Stereo VCR or
TV Monitor
(continued on next page)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from VCR or TV Monitor (continued)
Installation
1 Attach the audio/video cable’s white
plug to the AUDIO OUT jack of the
TV (or VCR).
2 Attach the audio/video cable’s yellow
plug to the VIDEO OUT jack on the
TV (or VCR).
Note: If your TV (or VCR) has stereo
AUDIO jacks, attach the white plug to the
one labeled MONO. If one is not labeled
MONO, you may need a Y-adapter, such
as AH25 shown on page 3, to hear both
channels.
3 Attach the yellow plug on the other
end of the audio/video cable to the
VIDEO jack and the white plug to the
AUDIO jack located behind the small
cover on the side of the camcorder.
4 Place the A/V (audio/video) IN/OUT
switch to IN.
To Record from a Monitor TV (or VCR)
1. A.Camcorder connected directly to
TV monitor: Turn on the TV, and
tune it to the channel you want to
record.
2. Slide the camcorder’s
CAMERA/OFF/VCR switch to VCR,
and insert a blank cassette. Press VCR
REC to start recording.
B. Camcorder connected to a VCR
that is already connected to a TV:
Turn on VCR and select channel
you want to record, or place the
cassette you want to copy in the
VCR. If you are copying a tape,
press the PLAY button on the VCR.
3. Press /B.LIGHT (STOP on remote)
when you are finished.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
Note: If you want to see what is being
recorded, turn on the TV, and tune it to
the channel you normally use to see the
signal from the VCR.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Shoulder Strap
The shoulder strap packed with your camcorder is designed to let you carry the
camcorder from your shoulder and — when you are ready to shoot — bring the
camcorder to shooting position in one quick movement.
To Attach the Shoulder Strap
1. Unfasten one end of the strap from the
buckle catch and slide the end of the
strap out of the tension band. Make
sure you leave the buckle on the strap.
2. Thread each end of the strap through
one of the shoulder strap attachment
rings as shown.
Attachment Rings
3. Thread the strap back through the
tension band and into the buckle.
Make sure the strap is firmly attached
before using it to carry the camcorder.
4. To adjust the length of the strap, pull a
loop of the strap loose. Then pull the
strap through the tension band or
buckle firmly.
Caution: When carrying the camcorder with the shoulder strap,
you may find it convenient to rotate the viewfinder to the front.
This helps prevent possible damage to the viewfinder from
bumping against your body as you move.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Traveling Tips
• Do not bump or tap the microphone
while recording – this sound will be
recorded. Be aware of backgrounds.
Background details may show up as
visual “clutter”. Noises (especially TV
sets, household appliances, traffic, etc.)
can detract from the sound you record.
• Practice recording under a variety of
lighting conditions.
• Use the viewfinder to keep camcorder
level or scenes will appear “tilted”.
• Include close-up shots of individuals
when taping family outings or group
functions.
• Avoid long “still” shots of landmarks
and scenic attractions. Include people
and details. “Local color” gives travel
videos lasting appeal. Consider
recording a familiar or landmark scene
from an unfamiliar vantage point.
• Make a video recording of your home
and contents to store in a safe place in
case of fire or theft.
• Do not move the camcorder rapidly
from side-to-side while recording. A
steady, gradual “pan” avoids blurring
and “jitter”.
• Try to make sure indoor scenes are
well-lit. This improves picture quality
and color reproduction.
Holding The Camcorder
• When possible, rest your elbows on a
table or other stable surface to help
keep the camcorder steady.
• To film at different angles, raise the
viewfinder.
• Standing against a wall may give your
recordings more stability.
• Do not pick up the camcorder by the
viewfinder.
• Use an optional tripod or monopod for
stable images.
• Hold the camcorder horizontally. Keep
your feet slightly apart and upper arms
close to your body.
Traveling Tips
• Write down your camcorder’s serial
number and keep it separate from the
camcorder when traveling. If your
camcorder is lost or stolen, you will be
able to identify it.
• Carry your camcorder in a carrying
case when traveling. See page 2 for a
case specially designed for this
camcorder. An ordinary suitcase or
carry bag does not offer the protection
your camcorder needs. Treat your
camcorder as carry on luggage to
protect it from rough handling.
• Use extra care to avoid damage to your
camcorder and accessories when
operating them at a beach or pool.
Spray, sand, and dust should be
avoided. If your lens has been exposed
to the elements, clean it only with
proper lens cleaning supplies.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewfinder Playback and Playback Features
CAMERA/OFF/VCR Switch
(On Side of Camcorder)
TE/
TIME
NORMAL
TITLE
OSD
ON/OFF
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
/B.LIGHT
66/EDIT +
55/EDIT –
6FADE
Viewfinder Playback
Viewfinder playback is the simplest way to watch tapes using the camcorder. This
method is generally used only to review scenes immediately after recording because the
display is in black and white.
To Play Back a Tape Through the Viewfinder
1. Place CAMERA/OFF/VCR in VCR.
4. Press /B.LIGHT (STOP on remote)
when you are finished.
2. Insert the cassette you want to play.
3. Press 6/FADE (PLAY on remote) to
play back the tape.
PLAY appears in the viewfinder.
PLAY
Display in Viewfinder
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewfinder Playback and Playback Features (continued)
CAMERA
RECORD
PAUSE
F.FWD
PAUSE
PLAY
STANDBY
PLAY
SCAN
STOP
W
REW
ZOOM
55 REW/SCAN
T
DISPLAY
STOP
VCR REC
TITLE
ON/OFF
66 F.FWD/SCAN
Playback Features
Stop Action Pause
Visual Searching
• During playback, press /D•S•E
(PAUSE on remote) to “stop the
action” and view one frame of the
tape.
• During playback, press and hold
55/EDIT – (55 REW/SCAN on
remote) if you want to visually
search the tape in reverse.
Caution: Pause is designed for
momentary interruptions and should
not be used for an extended period of
time. If the camcorder remains in
pause for more than five minutes, it
will enter the stop mode.
• During playback, press and hold
66/EDIT + (66 REW/SCAN on
remote) if you want to visually
search the tape forward.
• Release the button to return to
normal playback.
•
Press /D•S•E (PAUSE on remote)
again to return to normal playback.
Notes: During pause and search operations, it
is normal for streaks to appear in the picture.
The sound is muted during pause and search.
When you reach the end of the tape during
playback, the tape is automatically rewound.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback on TV or VCR Using AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV or VCR using AUDIO/VIDEO IN jacks, use the
audio/video cable that was packed with the camcorder. If your TV is already
connected to a VCR, you can attach the camcorder to the VCR and watch what the
camcorder is recording or playing on the TV.
TE/
TIME
/B.LIGHT
NORMAL
TITLE
CAMERA/
OSD
ON/OFF
OFF/VCR Switch
(Located on other side)
/FADE
5
A/V IN/OUT
Switch in OUT
B.LIGHT
FADE
EDIT–
EDIT+
A/V
IN
D•S•E
A/M FOCUS
SCENE SELECT
VCR REC
AUTO
AUDIO
VIDEO
DC
AUDIO Jack
VIDEO Jack
CAMERA
RECORD
PAUSE
F.FWD
CAMERA
RECORD/
STANDBY
3
STANDBY
PLAY
SCAN
STOP
PLAY
STOP
REW
W
4
ZOOM
T
DISPLAY
4
VCR REC
TITLE
3
ON/OFF
1
White
Audio
Plug
Audio/Video
Cable
(Supplied)
Y-Adapter
(Optional)
1
White
Audio
Plug
Audio/Video
Cable
(Supplied)
L
AUDIO
IN
OR
AUDIO
IN
R
VIDEO
IN
VIDEO
IN
2
Yellow Video Plug
2
Yellow Video Plug
Back of
Mono VCR or
TV Monitor
Back of
Stereo VCR or
TV Monitor
Caution: The unauthorized recording of television programs and other recorded material
may infringe the rights of others.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback on TV or VCR (continued)
Installation
1 Attach white plug on one end of the
audio/video cable to AUDIO IN jack
on the TV (or VCR).
3 Attach the white plug on the other
end of the audio/video cable to the
white AUDIO plug (located under the
small cover) on the side of the
camcorder.
Note: If your TV (or VCR) has stereo
AUDIO IN jacks, attach white plug to
the one labeled MONO. If one is not
labeled MONO, you may need a
Y-adapter, such as AH25, shown on
page 3 to hear both channels.
4 Attach the yellow plug to the yellow
VIDEO plug on the camcorder.
5 Place the A/V (audio/video) IN/OUT
switch to OUT.
2 Attach the yellow plug to the
VIDEO IN jack on the TV (or VCR).
Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video input channel.
2. Place CAMERA/OFF/VCR in VCR to
turn on the camcorder.
3. Press 6/FADE (PLAY on remote) to
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
play the tape.
• During playback, use the playback
features on page 53.
4. To copy what the camcorder is playing,
place a blank cassette in the VCR, and
press the VCR’s RECORD button.
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
5. Press /B.LIGHT (STOP on remote)
when you are finished.
coming from the VCR.
Viewing What the Camcorder is Seeing (or Recording)
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
the video input channel.
2. Place CAMERA/OFF/VCR
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
3. Press the thumb trigger
(CAMERA/RECORD STANDBY on
remote) to begin recording. You can
watch what the camcorder is seeing (or
recording) on the TV screen.
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Troubles sometimes are caused by simple “faults” that you can easily correct without the
help of a service technician by first checking a few basic remedies.
Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter,
look below for the type of trouble you are experiencing. Then perform the simple
checks and adjustments listed for that trouble.
Trouble
Checks and Adjustments
No power
• If using battery, it may need to be recharged.
• Make sure adapter/charger is plugged into working outlet.
Won’t record or
playback
• Make sure adapter/charger is plugged into working outlet.
• If DEW indicator appears in viewfinder, there is moisture in
the camcorder. Remove the cassette from camcorder and let
it dry naturally for at least one hour.
• There may be no cassette in the camcorder.
• Try ejecting and reinserting the cassette.
• The cassette tape may be broken, try another cassette.
• You may have reached end of cassette — try rewinding it.
Won’t playback
Won’t record
• CAMERA/OFF/VCR switch must be in VCR.
• Safety tab has been closed. (See page 24.)
• CAMERA/OFF/VCR switch must be in CAMERA.
No picture in
viewfinder
• Remove lens cap.
• CAMERA/OFF/VCR switch must be in CAMERA.
Tape stops during
rewind or fast
forward
• Time-counter zero memory may be on. Whenever “MEM”
appears under time-counter display, the camcorder will stop
at “0:00:00 MEM”. Place DATE/TIME/NORMAL/TITLE in
NORMAL and press Z/MEMORY to turn off zero memory.
• Tape may be at the end or already rewound.
Camcorder remains
in “stop action”
• Press /D•S•E (PAUSE on remote) to return to normal
playback.
Viewfinder images
out of focus
• Try adjusting eyepiece focus control. See page 31.
• Lens is smudged and image appears unfocused.
• The small BRIGHT and FOCUS controls on the viewfinder
are set at the factory and should need no adjustment. If they
require adjustment, carefully use a small plastic screwdriver
to prevent damaging the delicate controls.
Picture has digital effects
• Repeatedly press D•S•E to remove special effects.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks (continued)
Trouble
Checks and Adjustments
Poor auto-focus
operation
• M. FOCUS appears in viewfinder. Press A/M FOCUS
button to turn on auto focus. See pages 38-39.
• Scene is dark. Auto-focus may not work under this
condition. See pages 38-39 for details on manual focus.
Date and/time (or date) • Date and time (or date) are recorded on tape when they
were recorded on tape
appear in viewfinder. Place DATE/TIME/NORMAL/
TITLE switch in DATE/TIME and press ON/OFF to
remove them from viewfinder.
Date indicator flashes in • Clock battery may need changing. See page 28.
viewfinder
• Clock battery needs to be installed. See page 29.
Date and/or time are
incorrect
• Clock battery needs changing. See page 28.
• Time (including AM/PM) or date needs to be set. See page 29.
Remote control
will not operate
camcorder
• Aim remote at remote sensor on camcorder.
• Remote must be within 13 feet from the camcorder.
• Remote control cell may need replacing. See page 15.
• CAMERA/OFF/VCR switch must be in CAMERA or VCR.
• Camcorder’s remote control sensor is exposed to direct
sunlight or strong artificial light. This may interfere with
operation of camcorder by remote.
Camcorder will not
record from audio/video
cable
• Check cable connections and make sure other component
is playing. See pages 48-49.
• Make sure A/V IN/OUT switch is in IN.
Camcorder turns off
during operation
• Camcorder remained in pause for five minutes. Press
thumb trigger to turn camcorder back on.
• Battery needs recharging.
Tally light flashes slowly • Remove cassette, turn camcorder off, wait 10-15 seconds,
or D.EMG, C.EMG,
L.EMG, S.EMG, R.EMG
appears in viewfinder
when displays are on
turn camcorder back on, and reload tape.
Picture looks unnatural or • Use of fluorescent, sodium, or mercury light when
has a vertical smear
recording using a SCENE SELECT mode may vary color.
• Recording a very bright subject using high shutter speeds
may cause smearing.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
• Do not store the camcorder in
temperatures below -22°F (-30C) or
above 149°F (65C).
Proper Care and Storage
• Keep dust and grit from entering the
camcorder’s cassette door. Dust and
grit are abrasive and will cause
excessive wear to both the camcorder’s
recording/playback heads and cassettes.
• When the camcorder is not in use,
always remove the cassette and
AC adapter/charger or battery.
• Retain the original carton for future
storage or shipping purposes.
• Before handling your camcorder, make
sure your hands and face are free from
any chemical products such as suntan
lotion, as it may damage the finish.
• Always replace the lens cap on the lens
when the camcorder is not in use.
• The camcorder can be damaged by
improper storage or handling. Do not
subject the camcorder to swinging,
shaking, or dropping.
Things to Avoid
• Do not attempt to disassemble your
camcorder. There are no user-
serviceable parts inside.
• Do not operate the camcorder in
extremely humid environments.
• Do not operate the camcorder near the
ocean as salt water or salt water spray
may damage the internal parts of the
camcorder.
• Avoid operating your camcorder
immediately after moving it from a cold
location to a warm location. Give the
camcorder 1-1/2 to 2 hours to reach a
stable temperature before inserting a
cassette. When the camcorder is
moved from cold to warm,
• Do not operate the camcorder for
extended periods in temperatures below
40°F (4C) or above 95°F (35C).
condensation may cause the tape to
stick to the headwheel and damage the
headwheel or tape.
• Do not expose the camcorder or
adapter/charger to rain or moisture. If
either component becomes wet, turn off
the power and take the unit to an
Authorized RCA Camcorder
Servicenter.
• Do not aim your camcorder at the sun
or other bright objects.
• Do not leave your camcorder in direct
sunlight for extended periods of time.
The resulting heat buildup could
permanently damage the camcorder’s
internal parts.
• Do not use an adapter/charger or
batteries other than the ones specified
for the camcorder. Use of the wrong
accessories may cause damage to the
camcorder.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance (continued)
Cleaning the Camcorder
To clean the camcorder’s exterior, remove any power source connected to the
camcorder and gently wipe it with a clean soft cloth.
Caution: Use of strong cleaning
products, such as those containing
I
alcohol or benzine, may damage
/
the camcorder.
B.LIGHT
FADE
EDIT+
D•S•E
EDIT–
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
Cleaning the Camcorder’s Lens
To clean the camcorder’s lens, blow it with a blower brush, and then gently wipe the
lens with cleaning tissue and commercially prepared cleaning solution designed for use
on camera lens. Improper cleaning may scratch the lens.
Caution: Do not touch the lens with
TE/
TIME
NORMAL
TITLE
your fingers. The oil from your skin
OSD
ON/OFF
can damage the lens.
B.LIGHT
FADE
EDIT+
A/V
D•S•E
IN
EDIT–
OU
A/M FOCUS
SCENE SELECT
REC
VCR
AUTO
Lens
Cleaning the Camcorder’s Viewfinder
The viewfinder eyepiece can be removed for cleaning.
Eyepiece Release Switch
1. Slide and hold eyepiece release
switch while rotating eyepiece
PUSH
counterclockwise to remove.
TAPE
EJECT
2. Remove dust using a blower brush.
3. Place the eyepiece on the
viewfinder and rotate clockwise to
replace.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Video Recorder Section
Power requirement: 6VDC
Power consumption: 6.4 W
Weight: 800 grams
Record/Playback System:
Two video record/playback heads
One flying erase head
(Without battery pack, lens hood, lens
cap, and cassette)
Dimensions: 3.9" (W) x 4.1" (H) x 9.6" (D)
(100 x 105 x 246 mm)
Video Signal: EIA Standard NTSC Color
Video Input: 1.0 Vp-p, 75 ohm
Video Output: 1.0 Vp-p, 75 ohm
Audio Input: –7.5 dBs
Audio Output: –7.5 dBs
Camera Section
Scanning: 525 Lines/60 Fields/30 Frames
Required Minimum Illumination: 2 lux
Lens: F:1.4 8:1 (6.0~48.0mm)
Image Sensor: 1/3" CCD
Tripod Mount
One 1/4" x 20 threaded hole
Diameter: 37 mm
User Information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications not expressly
approved by the manufacturer may void the
user’s FCC authority to operate this
camcorder.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled “Digital Apparatus”, ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, NMB-003 édictée par le ministre des Communications.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
What your warranty covers:
• Any defect in material or workmanship.
• 90 days for labor charges.
• One year for parts.
evidence of purchase date, (2) your
name and address, and (3) a brief
description of the problem.
• Ship the camcorder to an Authorized
RCA Camcorder Servicenter.
The warranty period for rental units
begins with the first rental.
• Pay any charges billed to you by the
Servicenter for service not covered by
the warranty.
What we will do:
• Pay any Authorized RCA Camcorder
Servicenter the labor charges to repair
your camcorder.
What your warranty does not cover:
• Customer instruction. (Your owner’s
manual clearly describes how to install,
adjust, and operate your camcorder.
Any additional information should be
obtained from your Dealer.)
• Pay any Authorized RCA Camcorder
Servicenter for the new or, at our
option, refurbished replacement parts
required to repair your camcorder.
• Installation and related adjustments.
• Cleaning of video/audio heads.
• Damage from misuse or neglect.
• Batteries for clock or other features.
How you get service:
• Check with your RCA Dealer or call
1-800-336-1900 for the Authorized
RCA Camcorder Servicenter nearest
you.
• A camcorder that has been modified or
incorporated into other products or is
used for institutional or other
If an Authorized RCA Camcorder
Servicenter is conveniently near you:
commercial purposes.
• Take your camcorder to the Authorized
RCA Camcorder Servicenter of your
choice.
• A camcorder purchased or serviced
outside the USA.
How state law relates to this warranty:
• Show the Servicenter Representative
your sales receipt or other evidence of
purchase date.
• This warranty gives you specific legal
rights, and you also may have other
rights that vary from state to state.
• Pick up your camcorder when repairs
are completed.
Product registration:
• Please complete and mail the product
registration card packed with your
camcorder. It will make it easier to
contact you should it ever be necessary.
The return of the card is not required
for warranty coverage.
If an Authorized RCA Camcorder
Servicenter is not located conveniently
near you:
• Pack the camcorder so that it will not
be damaged during shipping. (We
recommend using the original carton
and packing materials.) Include any
cables and other accessories originally
furnished with the camcorder.
If you purchased your camcorder
outside the United States:
• See your Dealer for details.
• Include in the camcorder carton
(1) a copy of your sales receipt or other
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A/M FOCUS Button..............................12,32,38-39
A/V (Audio/Video) IN OUT
Date and Time Display ...................................28-30
Date and Time, Recording ...................................30
Date and Time, Setting.........................................29
DATE/TIME/NORMAL/TITLE
Switch.............................13,26,29,30,33,41-45
DC, AUDIO, and VIDEO,
Switch ............................12,46-47,48-49,54-55
AC Adapter/Charger, Safety Instructions.............iii
Accessories, Included.............................................8
Accessories, Optional .........................................2-7
Accessory Shoe....................................................13
Accessory, Order Form.......................................5-7
Adapter/Charger, Using ....................................9,18
Attaching the Shoulder Strap ...............................50
AUDIO, VIDEO, and DC
Jacks...............................13,46-47,48-49,54-55
Design Specifications...........................................60
DEW Indicator.................................................10,32
DISPLAY Button ........................................16,26,41
Display On/Off Feature........................................26
Displays in Viewfinder...................................32-33
Edit Insert From Monitor TV or VCR............46-47
Edit Search ...........................................................26
EJECT Button ............................................10,12,25
Erase Protection ...................................................24
Eyepiece Focus Control .............................11,12,31
Eyepiece Release Switch.................................14,59
F.FWD 66/SCAN
Button........................16-17,26-27,41,45,52,53
FADE 6 (Play) Button......................12,37,52,53,55
Fading ..................................................................37
FF Indicator....................................................32-33
First-Time Operation ........................................8-14
Flying Erase Head................................................27
Focusing .........................................................38-39
Hand Strap, Adjusting..........................................10
Handstrap ........................................................10,14
High-Speed Shutter Mode....................................34
Holding the Camcorder........................................51
HSS (High Speed Shutter) Indicator ....................34
Important Safeguards.......................................iv-vii
Included Accessories..............................................8
Inserting and Removing Cassettes .......................25
Iris, Automatic......................................................27
Lens Cap, Attaching.............................................10
Lens, Cleaning......................................................59
Limited Warranty.................................................61
Low Battery Warning...........................................21
M.FOCUS Indicator...................................32,38-39
Maintenance and Care ....................................58-59
Making Better Videos ..........................................51
Manual Focus ......................................................39
Microphone .....................................................12,27
NORMAL/TITLE/TIME/DATE
Jacks...............................13,46-47,48-49,54-55
AUTO Mode.........................................................34
B.LIGHT/ (Backlight/Stop)
Button .......................................12,27,35,41,52
BATT EJECT Button.......................................12,20
Battery Level Indicator ...................................21,32
Battery Marker Switch.........................................19
Battery Safety Precautions...................................20
Battery, Attaching and Removing.....................9,20
Battery, Care and Storage ....................................21
Battery, Clock ......................................................28
Battery, Using Rechargeable .......................9,19-21
BRIGHT and FOCUS Controls.......................14,56
Buttons, Camcorder ........................................12-14
Buttons, Remote Control ................................16-17
Camcorder Cleaning.............................................59
Camcorder Controls........................................12-14
Camcorder, Holding.............................................51
Camcorder, Powering .....................................18-23
Camcorder, Turning On .......................................10
Camcorder, Unpacking ..........................................8
CAMERA/OFF/VCR
Button ...............9-10,14,16,20,27-31,40-44,52
CAMERA RECORD/STANDBY
Button..................................16-17,27,41,43,45
Car Cord Adapter/Charger, Optional..............22-23
Care and Maintenance ....................................58-59
Care and Storage of Battery.................................21
Care and Storage, Cassettes .................................24
Cassettes, Inserting and Removing .................10,25
CHAR - and + Buttons ....................................13,42
Charging the Battery ............................................19
Chart of Characters ..............................................43
Checking Problems.........................................56-57
Cleaning the Viewfinder ......................................59
Cleaning, Camcorder............................................59
Cleaning, Lens......................................................59
Cleaning, Viewfinder...........................................59
Clock Cell, Installing ...........................................28
Contents..................................................................1
Controls, Camcorder.......................................12-14
Copying Tapes......................................48-49,54-55
Correcting the Time and Date..............................29
Switch.............................13,26,29,30,33,41-45
OFF/VCR/CAMERA
Button ...............9-10,14,16,20,27-31,40-45,52
ON/OFF/OSD Button .................13,26,30,33,41-45
Operation, First-Time .......................................8-14
Optional Accessories ..........................................2-7
Order Form, Accessory.......................................5-7
OSD/ON/OFF Button .................13,26,30,33,41-45
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (continued)
PAUSE Button ...........................................16-17,53
/D•S•E (Pause/Digital Special Effects)
Solving Problems............................................56-57
Specifications.......................................................60
Speed, Recording and Playback...........................24
SPORTS Indicator ................................................34
Sports Mode .........................................................34
STANDBY/CAMERA
RECORD Button....................16-17,27,41,43,45
Status Indicators..............................................32-33
STBY Indicator................................................32-33
STOP Button....................................16-17,27,44,52
STOP Indicator ...............................................32-33
Stop-Action Pause................................................53
Button ............................................12,32,40,53
Pause, Stop-Action...............................................53
PLAY Button ..............................................16-17,52
6(Play)/FADE ..................................12,37,52,53,55
PLAY Indicator...........................................32-33,52
Playback..........................................................52-55
Playback Features.................................................53
Playback on a TV With AUDIO/VIDEO IN
Jacks ........................................................54-55
Playback Speeds...................................................24
Playback, First......................................................12
Playback, Viewfinder......................................52-53
Plug Adapter.........................................................18
PORTRAIT Indicator............................................34
Portrait Mode .......................................................34
Powering the Camcorder ................................18-23
Problem Solving .............................................56-57
Product Registration...................Inside Front Cover
Quick Review.......................................................26
REC Indicator........................................11,27,32,33
RECORD/STANDBY/
CAMERA Button....................16-17,27,41,43,45
Recording From VCR or TV Monitor............48-49
Recording Speed ..................................................24
Recording Tips.....................................................51
Recording, First....................................................11
Registration Card .......................Inside Front Cover
Remote Control Battery, Replacing.....................15
Remote Control Buttons .................................16-17
Remote Control Sensor ...................................12,15
Replacing Battery Cell, Remote Control .............15
RESET + or – Buttons ...........................13,29,41,45
REW Indicator.................................................32-33
REW/55 SCAN Button......12,16-17,26-27,41,52,53
Safeguards, Important......................................iv-vii
Safety Instructions, AC Adapter/Charger.............iii
Safety Precautions ...............................................i-ii
Safety Tab ............................................................24
SCAN/66 F.FWD Button..16-17,26-27,41,45,52,53
SCAN/55 REW Button...........16-17,26-27,41,52,53
SCENE SELECT AE Dial...........................11,32,34
SCENE SELECT AE Indicators.......................32,34
SCENE SELECT AE Modes.................................34
Searching, Visual .................................................53
SELF TIMER..............................................16-17,27
Self Timer .......................................................32-33
Sensor, Remote Control ..................................12,15
SET/Z.MEMORY
B.LIGHT (Stop/Backlight)
Button ..................................11,12,27,35,41,52
/
Table of Contents...................................................1
Tally Light.............................................11,12,26,27
TAPE EJECT Button..................................10,14,25
TAPE END Indicator ......................................32-33
TAPE Indicator ...............................................32-33
Tape Copying .......................................48-49,54-55
Tape Positioning...................................................27
Things to Avoid....................................................58
Thumb Trigger ...........................................11,14,37
Tilt Adjustment ....................................................31
Time and Date Display ...................................28-30
Time and Date, Recording ...................................30
Time and Date, Setting.........................................29
Time Counter.............................................32-33,41
TIME/DATE/NORMAL/TITLE Switch .26,33,41-45
Tips, Recording....................................................51
Tips, Traveling.....................................................51
Title Display ...................................................32-33
TITLE ON/OFF Button ........................16-17,42-43
Titler .....................................................32-33,42-43
Traveling Tips......................................................51
Tripod, Using .........................................................4
Trouble Checks...............................................56-57
Turning On the Camcorder ..................................10
Unpacking the Camcorder......................................8
VCR/OFF/CAMERA
Button ...............9-10,14,16,20,27-31,40-45,52
VIDEO, AUDIO, and DC
Jacks...............................13,46-47,48-49,54-55
Video Cassettes...............................................24-25
Viewfinder .............................11,12,31,32-33,52,58
Viewfinder, Adjusting..........................................31
Viewfinder, Cleaning...........................................59
Viewfinder Displays .......................................32-33
Viewfinder Playback............................................52
Visual Searching ..................................................53
Warranty, Limited................................................61
White Balance, Automatic ...................................27
Z.MEMORY/SET
Button......................14,29,30,32-33,35,41,42,45
Setting the Time and Date....................................29
Shoulder Strap Attachment Rings...................14,50
Shoulder Strap, Attaching....................................50
Button...................14,29,30,32-33,35,41,42,45
63
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest Home
Entertainment Dealer
or Authorized Servicenter
call toll-free in the U.S.A.
1-800-336-1900
Canadian Consumers –
Your toll-free numbers are:
English: 1-800-522-0338
French: 1-800-522-0445
If your camcorder needs service, please
contact your dealer or the nearest Servicenter
from the yellow pages. Please do not send
any products to the Indianapolis address listed
in this manual or on the carton. This will only
add delays in service for your product.
Thomson Consumer Electronics
600 N Sherman Dr, PO Box 1976
Indianapolis, IN 46206
©
1994 Thomson Consumer Electronics, Inc.
®
Trademark(s) Registered
Marca(s) Registrada(s)
Printed in Korea
Part Number 94-Pro809-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|