PD-930/ PD-930T
PD-930B/ PD-930BT
Detachable 9” Monitor
Touch Screen
DVD/CD/MP3/MP4
AM/FM Radio
With Bluetooth (only for PD-930B/PD-930BT)
External TV box (only for PD-930T/PD-930BT)
Owner’s Manual
Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
WARNING! ................................................................................................................. 2
OPERATION PRECAUTIONS.................................................................................... 2
ACCESSORIES.......................................................................................................... 4
UNIT INSTALLATION AND REMOVAL...................................................................... 5
WIRING CONNECTIONS........................................................................................... 7
PANEL........................................................................................................................ 9
REMOTE CONTROL................................................................................................ 10
REMOVE BATTERY................................................................................................. 13
MAIN MENU ............................................................................................................. 13
◆RADIO PLAYER................................................................................................... 14
◆DVD PLAYER ...................................................................................................... 15
◆DISC/USB/SD/MMC INTERFACE OPERATION .................................................. 16
◆AV-IN MODE......................................................................................................... 16
◆SETTING CONTROL ............................................................................................ 16
SOUND CONTROL .................................................................................................. 17
DISPLAY CONTROL ................................................................................................ 18
GENERAL CONTROL .............................................................................................. 18
RADIO CONTROL.................................................................................................... 18
DVD SET UP MENU................................................................................................. 19
SYSTEM INFORMATION......................................................................................... 20
CALIBRATION.......................................................................................................... 20
TV SECTION(ONLY FOR PD-930T/PD-930BT)....................................................... 20
BLUETOOTH SECTION (ONLY FOR PD-930B/PD-930BT) .................................... 22
SMART CONTROL(ONLY FOR PD-930/PD-930T).................................................. 24
OTHER FUNCTIONS ............................................................................................... 25
NOTES ON DISC ..................................................................................................... 26
TROUBLESHOOTING.............................................................................................. 27
TROUBLESHOOTING.............................................................................................. 28
TECHNICAL SPECIFICATIONS............................................................................... 29
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Package contains the following accessories for installation and operation of the unit.
(1) Washer, Spring
1 each
Washer, M5 Nut
(2) Mounting Strap
(3) Bolt
1
1
(4) Screw
4
(5) Mounting Collar
(6) Release Key
1
2
(7) Screw
1
1
(8) Rubber Cushion
Smart control cable (only for
PD-930/PD-930T)
Remote Control
Warranty card
Power Cable
Note:
Product image may vary from the actual delivery.
Trim ring
User Manual
PD-930T/PD-930BT)
TV box (only for
4
Download from Www.Somanuals.com. All Manuals Search And Download.
UNIT INSTALLATION AND REMOVAL
Installation:
1) Install the mounting sleeve into the
dashboard.
2) Bend the tabs into place to secure the
sleeve.
3) Slide the unit into the mounting sleeve.
4) Install the trim bezel onto the unit.
5) Install the panel to the unit.
6) Make sure all faceplate tabs meet properly
with the mounting plate.
8) Illustration of completed installation.
7) Press the panel, make sure the gear
locked to the mounting hole.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Removal:
1) Press the button.
2) Safely detach the faceplate.
3) Take faceplate off of the mounting plate.
4) Take the panel out.
5) Detach the trim bezel.
6) Insert the keys into the opening between
the unit and the mounting sleeve to unlock.
7) Pull the unit out of the mounting sleeve.
8) Illustration of removal.
Note:
Before starting installation of the unit, make sure the wiring is connected properly.
Use only the parts provided with the unit to ensure proper installation.
The use of unauthorized parts may cause malfunction.
Install the unit where it does not get in the driver’s way and will not injure the passenger in case
there is a sudden stop, like an emergency stop.
The control panel can easily be damaged by shocks. After removing it, place it in a protective
case and be careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important
part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING CONNECTIONS
NOTE: Never connect cable to the system while it is connected to the battery power. Whenever
the unit is disconnected from the battery, the preset memory will be erased and the unit will go
back to its factory defaults.
When the brown cable for steering wheel control connected to the steering wheel, we can use
the steering wheel to control some unit
Note: To watch video the parking wire should be connected to break signal. 2 cables is
connected to a Hands-Free device (not included).
Parking wire
Note: The parking wire is connected with brake signal; for safety, the programs can be seen on
the monitor after braking the car.
Connecting the reversing line to taillight on the car
7
Download from Www.Somanuals.com. All Manuals Search And Download.
After connecting, when you start up the reverse gear, the unit will receive the picture from car
rear view camera.
Note:
-
Only use groundless loudspeakers.
- Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging
your loudspeakers at higher volumes.
- Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may
damage the unit.
- Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car
body (GND). The unit is using a BTL circuit and each loudspeaker must be connected
with insulated cables according the diagram.
- Loudspeaker cables and/or optional external power amplifiers must always be about
30cm away from the antenna and/or antenna extension parts.
Connect the speakers according the following diagram, incorrect connections will damage the
unit or your loudspeakers
Correct connection
Left front - Right front | Left rear - Right rear
Incorrect connections
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL
1. MIC
2. POWER/ MUTE button
Press it to turn on the unit. When the unit is on, short press it mute the volume output, long
press it to turn the unit off.
3. MENU button
Press it to turn to the main menu quickly.
4. SETUP/EQ button
Press it to turn to setting menu quickly. Long press the button to enter into EQ setting.
5. EJECT button
Press to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is
reinserted automatically.
Press and hold for 2 second to adjust the Monitor tilt angle: TILT ANGLE 1 => TILT ANGLE 2
=> TILT ANGLE 3 => TILT ANGLE 4.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Release button
Press to detach and release the front panel. When the unit was released, it will switch off
automatically after a few second. Detach/Attach the Panel: Press REL button and pull out the
panel towards yourself to release the panel. To attach it, press the control panel into the main
unit until the “click” sound is heard.
7. SD/MMC CARD slot
SD/MMC card slot, for Multimedia playback files only. Insert a SD/MMC CARD into this slot and
the unit will automatically start reading and playback the card. * Supported Music File Format:
MP3, WMA Files.
8. AV-in Jack
Put the AV plug into the AV-IN jack which was marked on front panel.
9. USB slot
10. TFT display
11. RESET button
Press it with a thin, sharp object. The device will then be reset to factory default settings.
12. Anti-Theft LED flash
13. DISC slot
REMOTE CONTROL
1: MODE
2: POWER
3: BAND/RANDOM/CLEAR
4: ENTER
5: UP/DOWN/LEFT/RIGHT
6: EJECT
7: STEREO/MONO/*
8: P.SCN/RPT/#
9: BACKWARD/SEEK-
FAST BACKWARD
10: LOUD
11:OSD
12:PBC/STOP
13:DIGIT NUMBERS
14:PLAY/PAUSE
15: MUTE/BLUETOOTH
16:MENU
17:SUBTITLE
18:SETUP
19:ANGLE/ACCEPT (optional)
20: INT/REJECT (optional)
21: VOLUME PLUS
22: A-B/ZOOM
23: SEL
24: FORWARD/SEEK+
FAST FORWARD
25: VOLUME MINUS
26: AUDIO/GOTO
27: OPEN(option without function)/TILT
1. MODE button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), Bluetooth (only for PD-
930B/PD-930BT) and AV IN.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. POWER button
Power on or off
3. BAND/ RDM/CLEAR button
In Radio mode, press it to change radio band in sequence of FM1 → FM2 → FM3 → AM1 →
AM2. In DVD mode, press to play randomly .In Bluetooth mode, press briefly it to clear single
wrong number. Long press it to clear all the wrong number.
4. ENTER button
Press it to confirm selection or setting.
5. Cursor / / / buttons
Use the / / / buttons to select the menu item: the title, track or to show next frame.
6. EJECT button
Press it to eject the disc.
7. STEREO/MONO/* button
Press STEREO button to select STEREO or MONO.
In BLUETOOTH mode, press it to make a * symbol.
8. P.SCN/ RPT /# button
In SD CARD/ USB mode, press to repeat REP 1 => REP DIR => REP ALL
In DVD mode, press to start repeat REP OFF=>REP Chapter=>REP Title=>REP Off.
In Radio mode: PS (Preset Scan): Press to scan all preset stations in the memory of the current
band and stay on each memory stations for about 5 seconds.
AS (Auto Save): Long press to save the stations with good reception automatically.
In BLUETOOTH mode, press it to make a # symbol.
9. / SEEK- button
In DVD mode, Press button to skip to the previous track. Press and hold button for two
seconds to activate fast reverse (REW) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching button Frequency down.
10. LOUD button
Press to set LOUD on or OFF.
11. OSD button
In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup.
(HUE / SATURATION / COLOR RESET / BRIGHT / CONTRAST / SHARP / BACK)
12. STOP/PBC button
Press it to Stop playback from the current position, press it again to final stop to the very
beginning. Press PLAY/PAUSE button to play.
Press and hold for two seconds to set PBC on/ off in VCD mode.
13. Digit 0-9 buttons
In radio mode, select 1-6 the desired band; In DVD mode, select track.
In BLUETOOTH mode, press it to input phone number，long press 0 number to make a +
symbol
14. PLAY/PAUSE button
In DVD mode, press it to pause playback, press again to resume.
15. MUTE/BLUETOOTH button
: Short press this button to mute the volume output, press it again to resume volume.
Long press this button to enter into Bluetooth mode.
16. MENU button
Press it to show main menu, in DVD mode, long press it to enter TITLE MENU (Enable only if
the DVD disc with title menu).
17. SUBTITLE button
Press it to select the subtitle language (Available only if the disc with subtitle function).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
18. SETUP button
In DVD mode press it to enter the setup menu.
19. ANGLE /ACCEPT button
In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded
DVD file or DVD disc that has this function).
In BLUETOOTH mode, press to make a call after inputted a phone number or accept an
incoming call.
20. INT /REJECT button
Press it to activate the intro function. You can play the beginning of every track for 10 seconds
in sequence.
In BLUETOOTH mode, press to reject a coming call or hang up while calling
21. VOL+ button
Press to increase volume level.
22. A-B/ZOOM button
During playback, press it at the starting point of section you want to repeat (A), press this
button again at the ending point of the section you want to repeat (B), section A-B repeating
starts. Press it again to cancel the A-B repeat function.
Press it and hold for two seconds in DVD mode to zoom the image in or out in the sequence of
ZOOM 2-> ZOOM 3-> ZOOM 4-> ZOOM 1/2-> ZOOM 1/3-> ZOOM 1/4.
23. SEL button
Press it to enter the SOUND SETTING menu, and press Cursor UP/DN buttons to choose an
item and press cursor left/right buttons to set the item. Press SEL button again to exit the menu.
24. / SEEK+ button
In DVD mode, Press button to skip to the next track. Press it and hold button for two
seconds to activate fast forward (FF) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching button Frequency up.
25. VOL- button
Press to decrease volume level.
26. AUDIO/GOTO button
In DVD mode press it to select the audio language.
In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R
=>STEREO.
Go to: in DVD mode，press and hold for 2 seconds to show TIME SEARCH menu, select
number and confirm to go to certain position directly. When press button to enter
TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or
CHAPTER position directly.
27. OPEN/TILT button:
Press it to adjust the tilt angle of monitor.(The open button is an option without function)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVE BATTERY
Note:
„ The distance may vary according to the brightness of ambient light.
„ If the remote is not used for an extended period of time, remove the battery to prevent
possible damage from battery leakage and corrosion.
„ Do not place any objects between the remote control unit and the sensor on the unit.
„ Do not drop the remote control onto the floor; it will damage it beyond repair.
„ Do not use the remote control unit, while simultaneously operating the remote control unit
of any other equipment; they may interfere resulting in improper operation.
„ The battery normally last for about one year although depending how often the remote
control is used. If the remote control unit isn’t working even when it is operated near the unit,
replace the battery with a new battery of the same make and use only a lithium cell battery
type: CR2025 (3V).
„ Dispose empty batteries in accordance with your local governmental regulations.
„ Do not short-circuit, disassemble, heat or dispose of fire or flames the battery.
„ Keep the battery out of reach of children, should the battery be swallowed, immediately
consult a doctor.
MAIN MENU
The best way to discover the program is to explore each screen in detail, and to find out how to
move from one to another. Read this chapter for a guided tour.
Unit starts by displaying the Main menu.
This is the root of the screen hierarchy, and you can simply access all features by tapping on
the touch screen buttons.
Tap the icons to enter a desired mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
◆RADIO PLAYER
To start Radio, tap RADIO button on main menu screen.
Mute the sound..
Increase the volume.
Decrease the volume.
Touch this button can choose FM1, FM2, FM3, AM1, AM2.
Touch this button can scan the stations from 1-6, long touch it to save the stations with
good reception automatically and scan each station for about 5 seconds.
Touch this button to search stations backward automatically.
Touch this button to search stations forward automatically.
Touch this button to open manual select station backward.
Touch this button to open manual select station forward.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
◆DVD PLAYER
To start DVD Player, tap on DVD button from main menu screen.
TOUCH SCREEN MENU
You will not see any buttons while DVD is played. Buttons will appear when you tap on TFT
screen. Tap the screen again to hide the buttons.
Insert DVD disc
Insert VCD disc
NOTE
1.
DVD Player will automatically start playing when you insert any DVD disc, MEMORY
card or USB device.
2.
3.
Warning displays if the vehicle is moving for driver's safety.
DVD Player will not only play video, but also picture and music files as well.
File Management
DVD mode plays files in a) Disc b) USB c) MEMORY card (MEMORY card slot in inner panel).
VOL increase or decrease by touch the button accordingly.
Pause playback. Press it again to continue playback.
Press it to Stop playback from the current position, press it again to final stop to the very
beginning.
/
Start fast rewind or fast forward. Press one of the keys again to change the spooling
speed. Press the Play key to regain normal playback.
In DVD mode, touch it can choose Repeat chapter =>repeat title =>repeat off.
In VCD mode, touch it can choose Repeat REP 1 => REP ALL => REP ALL.
Touch it to select the subtitle language (Available only if the disc with subtitle function).
in DVD mode touch it to select the audio language (Available only if the disc with subtitle
function)；In VCD mode touch it can choose MONO L---MONO R---STEREO.
In VCD mode touch it can choose PBC ON or OFF
In DVD mode touch it to enter TITLE MENU (Enable only if the DVD disc with title menu).
/
/
Touch it to select previous or next track.
Select the viewing angle of the touch-screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
◆DISC/USB/SD/MMC INTERFACE OPERATION
When a file disc, USB or a memory card is played, the screen will show following interface:
Mute the sound.
Stop button. Press it to stop playback from the
current track, press it again to final stop to the very
beginning
Play/pause button. Press it to pause the track,
press again to resume.
Press it button to restart a track,
FR×2×4×8×20-play will be display.
Press it button to skip to the next track.
FF×2×4×8×20-play will be display.
Press it to skip to the previous track.
Press it to skip to the next track.
Press it to activate the intro function. You can
play the beginning of every track for 10 seconds in
sequence.
Press it to repeat REP 1 => REP DIR => REP
ALL
Press it to play track randomly.
Press it to enter previous page.
Press it to enter next page.
Press it to go to folder selection.
◆AV-IN MODE
To start AV-IN Mode, tap on AV-IN button from main menu screen.
Connect the external audio/video signal source to this unit. Select AV-IN mode in the main
menu or by pressing repeat Mode button on the front panel.
Note: If there is no external video input, the TFT displays “NO SIGNAL”.
Press the
icon to be back to main menu.
◆SETTING CONTROL
Your device has default system settings. You can customize the settings to suit your personal
needs. Once you change settings, your new settings will remain until you change it again.
To start SETTING, tap it on main menu screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND CONTROL
Tap SOUND button to show SOUND 1 menu.
EQ
Select EQ mode
BAS LEVEL
TRE LEVEL
BALANCE
FADER
Bass up/down
Treble up/down
Left/Right Balance Control
Front/Back Fader Control
Tap
button to show SOUND 2 menu.
BEEP
Set keypad sound on /off
Set loud on /off
LOUDNESS
LOUD LEVEL
Adjust loud level
SUBWOOFER Set subwoofer on /off
SUBW LEVEL
Adjust subwoofer level
Tap
button to show SOUND 3 menu.
SUBW LPF
Select a subwoofer crossover
option: 80HZ,120HZ,160HZ
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY CONTROL
Tap DISPLAY button to show DISPLAY menu.
SCREEN
Screen setting 16:9, 4:3,FULL
BACKLIGHT Backlight setting LOW, MID,
HIGH
GENERAL CONTROL
Tap GENERAL button to show GENERAL menu.
TILT
Adjust monitor tilt angle
ANGLE
CLOCK
Set clock display time on or off.
CLOCK
HOUR
TIME
Set 24hour format or 12hour
format
display time
Automatic Bluetooth connection
AUTO
to
a
previously connected
CONNECT
mobile telephone.
(only for PD-930B/PD-930BT)
SET TIME
Adjust clock display time
RADIO CONTROL
Tap RADIO button to show RADIO menu.
Set AREA: EUROPE, U.S.A,
SOUTH AMERICA,RUSSIA
AREA
STEREO Set STEREO ON or OFF
LOCAL Set LOCAL ON or OFF
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SET UP MENU
Tap the DVD button in main menu to enter the DVD player. Press the SETUP button to enter
into the system settings main menu; press the up or down arrow buttons to move to the
highlighted menu item and select one of the Setup Pages:
[1]. Subtitle Lang setting:
With this option you can select the preferred language for the subtitles. When the selected
language is recorded on the disc then this language will automatically be shown. If not, the first
language recorded on the disc is displayed.
[2].Audio Lang setting:
With this option you can select the preferred language for the audio output. When the selected
language is recorded on the disc (not all discs have multiple languages recorded) then this
language will automatically be played. If not, the first language recorded on the disc is played.
[3]. DVD Menu Lang setting:
With this option you can select the preferred language for the disc menu. When the selected
language is recorded on the disc then this language will automatically be selected. If not, the
first language recorded on the disc is displayed.
[4]. MP4 Language
With this option you can select the preferred language for the MP4 menu.
[5] Password:
The password for this unit is initially set to factory default 0000. If you want to change your
password, you need to enter the old password first and confirm it, and enter a new password
and confirm. WARNING: if you forget your password, there is no possibility to reset the
password again. Do not forget your password and write it down or store the password in a safe
place.
[6] Rating / PARENTAL SETUP.
For DVD discs which support the USA rating system, setting up rating control can prevent
children from watching content that might not be suitable for their age. You are asked to enter
the password when you change the rating setting. The default password is 0000.
Code
1.NONE
2.G
Description
Kid safe
General Audiences – ALL ages admitted
PARENTAL GUIDANCE SUGGESTED-Some material may not be suitable fo
r children
3.PG
PARENTS STRONGLY CAUTIONED-Some material may be inappropriate fo
r children under 13
4.PG-13
5.PG-R
6.R
7.NC-17
8. Adult
Restricted, under 17 requires accompanying parent or adult guardian.
RESTRICTED-Under 17 requires accompanying parent or adult guardian
NO ONE 17 AND UNDER ADMITTED
Above 17 Admitted
19
Download from Www.Somanuals.com. All Manuals Search And Download.
[7] TV SHAPE:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letter Box)
and Wide (16:9). Different disc formats will display different images depending this setting and
the screen size used.
[8] NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in
Europe. NTSC is commonly used in the USA and Japan. Auto is commonly used.
[9] DEFAULT:
Factory reset. Set all values to Factory default values
including memory and preset stations.
SYSTEM INFORMATION
Press SYSTEM button to show the information of the
system. You can view detail system information
including serial number of the software.
CALIBRATION
The calibration of the screen is useful when some
malfunction occur with the touch screen and it needs
adjustment.
CALIBRATION procedure of the touch screen is
described as below: When the target moves to
another position, tap and hold at the center of the new
target. Repeat each time to complete the calibration
process. When the calibration has been completed,
the device switches back to the previous operating
mode and retain the previous setting. If you press
Reset button, the setting will return to factory setting.
TV SECTION(ONLY FOR PD-930T/PD-930BT)
Connect a TV BOX to the TV antenna jack of the unit. Select TV mode, and then touch the
center of the display; following interface will be display.
In TV mode, press the Play/Pause buttons on the RC once to enter TV menu setting; or press
TV MENU icon on the main menu to enter TV menu.
1. Press the / on remote or tap the screen to select one of the setup pages: Auto program
=> Manual program.
2. To enter the selected page press ENTER button on the RC. Press UP/DOWN cursor buttons
on the RC
Select this menu item is to set the storage number or touch the needed item on the screen to
select an item, and then press ENTER button on the RC or press the item on the screen to
20
Download from Www.Somanuals.com. All Manuals Search And Download.
adjust the setting. Tap BACK button to return to the setup page.
3. Press the
4. Press the
icon to be back to main menu.
button to switch channel.
/
Note: This function is available when TV tuner is connected.
TV MENU
Auto program (Auto seek mode)
z
System
Select the menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote or touch corresponding option on the touch screen to select.
z
Audio
Select this menu item is to set the TV sound system:
1) When system setting PAL, TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER
on remote or touch corresponding option on the touch screen to select.
2) When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on
remote or touch corresponding option on the touch screen to select.
3) When system setting NTSC, M/N sound system can be selected only.
z
Search
Select this menu item is to start searching and storing stations automatically.
Manual program (manual seek mode)
Storage
Select this menu item is to set the storage number.
z
System
Select this menu item is to set TV system: SECAM => NTSC =>PAL, press ENTER button on
the remote touch corresponding option on the touch screen to select.
z
Audio
Select this menu item is to set the TV sound system:
1) When system settings PAL, press ENTER on remote or tap the screen button to select TV
sound system: D/K=>M/N=> B/G=> I.
2) When system setting SECAM, TV sound system B/G=>I=>D/K.
3) When system setting NTSC, M/N sound system can be selected only.
Channel
Select this menu item is to set your desired searching channel, press / button on the RC to
select one, or press / icon on the screen to select channel.
z
Fine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press
/ button on the RC or press / icon on the screen to adjust.
z
Memory
Select memory on or off is to set whether memory the searched station or not, press
ENTER on remote or tap the screen button to select.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BLUETOOTH SECTION (ONLY FOR PD-930B/PD-930BT)
Warning: Driving and having a Telephone conversation at the same time is dangerous, please
park your car before having a telephone conversation. The supplier waves any and all liability
when this warning is not followed.
To enter Bluetooth mode, you can tap Bluetooth icon on Main menu or long press the
mute/Bluetooth button on the Remote Control or press mode button on remote or on front panel.
BT Main Menu
Bluetooth disconnect mode
Bluetooth connect mode
A user can make own choice by tap the buttons.
Tap CALLING button to use phone functions.
Tap MUSIC button to start BLUETOOTH music player.
Tap HISTORY button to check dialed, received, missed calls.
Tap PHONEBOOK button to use phone book functions.
Pairing Mode
At the 1st time when using BLUETOOTH, you need to pair the mobile phone first.
When a phone have not been paired with the unit, the BT icon and Pairing mark will blink
continually on the panel.
When the unit have connect with phone, the BT icon will turn on and the Mobile phone name (if
available) will be display on the panel.
According to mobile pairing device manual, after searching new device, select it, input
password "0000" and confirm ok, device paring is finished.
The text ‘Enter Number’ will shows on the panel after the pairing is completed. It means device
is connected and ready for BLUETOOTH communication.
Auto-connect - Disconnect
When power on the unit, the last paired phone will be connected to the device via Bluetooth
automatically, after searching about one minute, if the device cannot find the paired phone, it
will stop searching. When in standby mode (unconnected), long press Bluetooth button on
remote control to active auto-connect function and the device will search the last paired phone.
If you want to disconnect the Bluetooth connection, turn off the Bluetooth on the phone.
1. CALLING BUTTON
Tap on CALLING button to enter call mode.
In Call mode, the unit can be used as your phone. Making and receiving calls are possible with
BLUETOOTH. Simply tap phone number and tap
button to hang up.
button to make a call, and tap
1.)
Tap CLEAR button shortly to delete a wrong digit, tap the CLEAR button or press
RDM/C button on remote for 3-4 seconds to delete all the numbers at once.
2)
Tap the
button for 3-4 seconds, the device automatically makes a call to the latest
call in its call log.
Voice Transfer
22
Download from Www.Somanuals.com. All Manuals Search And Download.
During a call, you can change a call from Bluetooth mode to phone by tapping Transfer button.
To have a call in Bluetooth mode again, tap Transfer button.
NOTE: the phonebook only supports Western
Characters. Any difference in character will be
shown such as “+, * or # ”.
2. BT PHONE BOOK
The unit can downloading the data from phone
automatically when the pairing between a phone
and the unit be completed.
The unit displays the data which have been
downloading from a phone.
Select a number and tap Send button to make a
calling.
3. Call history mode
Tap HISTORY button to see history mode.
The unit can download automatically all the date
from the mobile Phone.
Dialed /Received/Missed calls are saved In History
mode .Tap Up/Down arrow load previous/next history record.
The calls in each category are orderly saved from the latest one to the final one.
Select a number and tap Send button to enter calling mode.
4. (A2DP) Music Mode
Tap MUSIC button to listen music in Bluetooth mode.
Tap the button for ‘music’ in Bluetooth main menu.
You can select the function with the key for
previous, play / pause, stop, and next.
A2DP (Advanced Audio Distribution Profile) Music
Player
A2DP is a function which can receive the audio
frequency signal from the mobile phone, amplified
by the car audio and played out by the car
speakers.
Notice: your mobile phone need to support A2DP.
Tap the buttons on the screen as shown, or press corresponding buttons (PAUSE/PLAY, STOP,
PREVIOUS/NEXT) on remote control to play, pause, play previous, or next music file.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart Control(Only for PD-930/PD-930T)
Smart Control technology communicates hands-free calling and MP3 playback commands by
the headphone connections of select Apple and Android devices. Incoming call answering,
MP3 track advancement, and even voice command activation are easily enabled from the head
unit touch-screen. Your mobile device can be kept in a secure location, ensuring safest driving
practices.
Activating Smart Control
After connecting the provided Smart Control cable to the head unit and
your mobile device, select the Smart Control icon on the desktop of the
head unit.
IMPORTANT NOTE
Before using the Smart Control function, please connect the provided AUX cable to the head
unit AUX input and the headphone output of your mobile device.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Phone Calls
When receiving a phone call, press the
play/pause icon (
/
) to answer the call.
Press to reject or end the phone call.
MP3 Playback
Press and hold
/
icon to activate MP3
playback mode, the most recently played song
will begin. Press or icon to advance to
the previous or next song. Press and hold or
icon to rewind or fast forward the track. Press
/
icon to play/pause the track.
IMPORTANT NOTE
> If a call is received while using any of the other head unit applications (DVD, AM/FM, USB,
etc.), Smart Control app should be activated before answering the call.
> When a call is received, MP3 playback will interrupt. Select mobile devices may not play
custom ringtones by Smart Control. Only the mobile device will play the incoming call ringtone.
Voice Command (select mobile devices)
Press and hold
icon to activate voice command functions.
Press
Press
/
icon to exit voice command and continue music playback
icon again to activate voice command choices on the mobile device and continue
music playback.
OTHER FUNCTIONS
Subwoofer
Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on
screen enter into main menu setting choose setting menu. Choose SOUND and set subwoofer
ON to enable subwoofer.
Parking
When the car is stopped and the parking brake is working, the screen can display the video
image, otherwise the screen can't display the video image
Back View Camera
This unit is equipped with back view camera output. The camera is used to observe the
situation behind the vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the reverse
wire for back a car with the rear gear light. Rear view camera picture will be enabled when you
are backing the car.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON DISC
— Only use groundless loudspeakers.
— Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your
loud speakers at higher volumes.
— Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may
damage the unit.
— Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car
body.
— (GND). Using a BTL circuit and each loudspeaker must be connected with insulated cables
according the diagram.
— Loudspeaker cables and/or optional external power amplifiers must always be about 30cm.
away from the antenna and/or antenna extension parts.
— If want to display for 9” TFT, parking wire must be connected to ground.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Cause
Remedy
Replace with fuse of the same amperage.
If the fuse blows again, consult your store
of purchase
Power does not turn
on.
(No sound is
produced.)
Fuse is blown
In correct wiring
Consult your local retailer.
1. Turn off the unit.
2. Remove all wires attached to the
power antenna lead. Check each wire
for a possible short to ground using an
ohm meter.
Power antennal
lead is shorted to
ground excessive
current is required
or remote on the
amplifiers or power
antenna.
No sound output
when operating the
unit with amplifiers
or power antenna
attached.
3. Turn on the unit.
4. Reconnect each amplifier remote wire
to the power antenna lead one by one.
If the amplifiers turn off before all wires
are attached, use an external replay to
provide remote-on voltage (excessive
current required).
Turn off the power, Then press the [no
open] button and remove the DCP. Press
the reset button for about 2 seconds with
a thin rod.
Nothing happens
when buttons are
pressed.
Display is not
Accurate
The microprocessor
has malfunctioned
due to noise, etc.
Panel or main unit
Connectors
are dirty
Wipe the dirt off with a soft cloth
moistened with cleaning alcohol.
Compact disc is
dirty
Compact disc is
heavily scratched
or warped
Clean the compact disc without scratches
Sound is bad directly
after power is turned
on.
Replace with a compact disc without
scratches.
Water droplets may
Sound is bad directly form on the internal
after power is turned lens when the car is
Let it dry for about 1 hour with the power
on.
on.
parked in a humid
place
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
SYMPTOM
CAUSE
SOLUTION
IF THE POWER SUPPLY IS PROPERLY
CONNECTED TO THE CAR
ACCESSORY SWITCH THE IGNITION KEY
TO “ACC”.
THE CAR IGNITION IS
NOT ON.
NO POWER
THE FUSE IS BLOWN.
REPLACE THE FUSE.
DISC CANNOT BE
LOADED.
PRESENCE OF DISC
INSIDE THE PLAYER
REMOVE THE DISC IN THE PLAYER
THEN PUT A NEW UPWARD.
INSERT THE COMPACT DISC WITH THE
LABEL FACING
INSERTING THE DISC IN
UPSIDE DOWN.
UPWARD.
COMPACT DISC IS
EXTREMELY DIRTY OR
DEFECTIVE.
CLEAN THE DISC OR TRY TO PLAY A
NEW ONE.
DISC CANNOT BE
READ.
COOL OFF UNTIL THE AMBIENT
TEMPERATURE RETURNS TO
NORMAL.
TEMPERATURE INSIDE
THE CAR IS TOO HIGH.
VOLUME IS IN MINIMUM.
ADJUST VOLUME TO A DESIRED LEVEL.
CHECK WIRING CONNECTION.
NO SOUND
WIRING IS NOT
PROPERLY CONNECTED.
THE BUILT-IN
MICROCOMPUTER IS NOT
OPERATING PROPERLY
DUE TO NOISE.
FRONT PANEL IS NOT
PROPERLY FIX INTO ITS
PLACE.
PRESS THE POWER BUTTON FOR
ABOUT 10 SECONDS
TO RESET THE UNIT.
THE OPERATION
KEYS DO NOT WORK.
THE INSTALLATION
ADJUST THE INSTALLATION ANGLE TO
ANGLE IS MORE THAN 30 LESS THAN 30
DEGREES.
DEGREES.
SOUND SKIPS.
THE DISC IS EXTREMELY
DIRTY OR DEFECTIVE.
CLEAN THE COMPACT DISC/TRY TO
PLAY A NEW ONE.
THE RADIO DOES
NOT WORK, THE
RADIO STATION
AUTOMATIC
SELECTION DOES
NOT WORK.
THE ANTENNA CABLE IS
NOT CONNECTED THE
SIGNALS ARE TOO WEAK. MANUALLY.
INSERT THE ANTENNA CABLE FIRMLY
SELECT A STATION
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
General
Power supply:
11~16V DC
Current consumption:
Maximum power output:
max. 10 A
52W x 4 channels (max)
DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture
CDCD-R/-RW/DVD±R/±RW playback
Compatible formats:
Dimensions (W x D x H) /
weight:
230*160*50 mm/2.5 kg
Working temperature
range:
-10℃- +60℃
ESP function:
10 sec. for Audio CD, 120 sec. for MP3
TFT display
Screen size:
Resolution:
Aspect ratio:
Brightness:
9 inch
800*3(RGB)*480 pixel
4:3/16:9
300 cd/㎡
FM Stereo Radio
Frequency range(EUROPE AREA):
Frequency range(SOUTH AMERICA AREA)
Frequency range(RUSSIA AREA)
87.5 – 108MHz(Step 50KHz)
87.5 – 108MHz(Step 100KHz)
87.5 – 108MHz(Step 50KHz)
65-74MHz(Step 10KHz)
87.5 – 107.9MHz(Step 200KHz)
18
Frequency range(U.S.A AREA)
Preset memory stations:
AM/MW Radio
Frequency range(EUROPE AREA):
Frequency range(SOUTH AMERICA AREA)
Frequency range(RUSSIA AREA)
Frequency range(U.S.A AREA)
Preset memory stations:
522kHz - 1620 KHz(Step 9KHz)
520kHz - 1710 KHz(Step 10KHz)
522kHz - 1620 KHz(Step 9KHz)
530kHz - 1710 KHz(Step 10KHz)
12
Audio Specification
Frequency response:
20 Hz-20 KHz
Specifications are subject to change without notice. Mass and dimension are approximate.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Pentair Water Dispenser 40106 Rev H 05 05 User Manual
Philips DVD Player DVD726 User Manual
Philips Flat Panel Television PFL5XX7H 12 User Manual
Philips Network Card SWV3459W 17 User Manual
Philips VCR VRZ262AT User Manual
Pioneer Satellite Radio GEX P900XM User Manual
Planet Technology Network Card SW 501 User Manual
Plantation Products Headphones 76512 01 User Manual
PNY Computer Hardware VCGGTX7702XPB User Manual
Porter Cable Portable Generator PH350IS User Manual