PT191MU
Touchscreen Monitor
USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Usage Notice
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Introduction
About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation
Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Start Your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User Controls
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to Use the OSD Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
On-Screen Display Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Warning Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Compatibility Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Touchscreen Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Usage Notice
WARNING – To prevent the risk of fire or shock hazards, do not expose
this product to rain or moisture.
!
!
WARNING – Please do not open or disassemble the product as this may
cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s
manual to maximize the life of your unit.
Do:
qTurn off the product before cleaning.
qUse only a dry soft cloth or clean room wiper when cleaning
the LCD panel surface.
qUse a soft cloth moistened with mild detergent to clean the
display housing.
qUse only high quality and safety approved AC/DC power adapter.
qDisconnect the power plug from AC outlet if the product is not
used for a long period of time.
Don’t:
qDo not touch the LCD panel surface with sharp or hard objects.
qDo not use abrasive cleaners, waxes or solvents for cleaning.
qDo not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
4
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About Planar’s PT191MU
The PT191MU is a 19”flat panel screen with an active matrix, thin-film transis-
tor (TFT), liquid crystal display (LCD).
Features include:
qAnalog and Digital dual signal input
q19”diagonal screen size
q1280 x 1024 high resolution
q16.7 million displayable colors
q31.5~80kHz horizontal scan
q56~75 Hz high refresh rate
q0.294 mm x 0.294 mm pixel pitch
q300 cd/m2 (typ.) brightness
q4 CCFT backlight lamps w/ 50,000 hrs life
q1000:1(typ.) contrast ratio
qL/R=89°/89°, U/D =89°/89° viewing angle, CR=10:1
qTr + Tf: 8 ms (typ.) response time
qAuto-adjustment function
qIntegrated multimedia audio function
qMultilingual OSD user controls
qVESA DPMS power saving
qUSB hub with 1 upstream and 2 downstream ports on the stand base
qStand with tilt and swivel functions
q3M® ClearTek™ II Capacitive touchscreen
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Touchscreen for PT191MU
qSurface: Anti-glare treatment
qInterface: USB
qDurability:
Capacitive: 225 million activations
qHardness of surface =
Capacitive: 6.5 Mohs
qTransmittance: Up to 91.5% typical
qS/W Driver Compatibility: Windows® 95/98/Me/NT/2000/XP, Linux
6
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Overview
LCD Display
Power Adapter
Power Cord
VGA Signal Cable
DVI-D Cable
Audio-In Cable
USB Upstream Cable
User’s Guide
Landing Strip
Touchscreen Driver
Installation CD-ROM
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Installation
Product Overview
• Front View
LCD Display
Front Panel Con-
trols
Stand
• Rear View
8
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
• USB Hub Ports
1. USB Downstream Ports
These two USB ports are available for connecting USB type peripheral
devices such as keyboard, mouse, printer and so on.
2. USB Upstream Port
This Port is for connecting the USB Upstream cable to computer’s or other
hub’s USB port.
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
• VESA Mount your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting
Interface Standard which defines a physical mounting interface for flat panel
monitors, and corresponding standards for flat panel monitor mounting devices,
such as wall and table arms.The VESA mounting interface is located on the back
of your monitor.To mount the monitor on a swing arm or other mounting
fixture, follow the instruction included with the mounting fixture to be used.
Note!
!
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw
hole is 8mm. Please use a M4 screw.
10
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Start Your Installation
• Connecting the display (Figure 1.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is off.
2. Connect the DC power cord to the power connector. Plug one end of the
AC power cord into the power adapter, and the other end into an electrical
outlet(1).
3. For the PC with Analog output: connect the VGA signal cable from display
VGA input connector to the 15-pin connector of your host computer and
tighten the screws(2).
4. For the PC with DVI digital output: Connect the DVI signal cable to the
connector of the display card in your computer; connect the other side to
the DVI-D input port of your display. Tighten the screws(3).
5. Connect the Audio-In cable from audio input port of your display to the
Audio-out port of your computer(4).
6. Connect the USB cable from USB port of your display to the USB port of
your computer(5).
7. Configure the touchscreen. Refer to the “Touch Screen Driver Installation”
section on page 23.
8. Once the touchscreen is configured, turn on your computer, display and
video source.
Notice: To ensure the LCD display works well with your computer, please
configure the display mode of your graphic card to make it less than
or equal to 1280 x 1024 resolution and make sure timing of the display
mode is compatible with the LCD display. We have listed the “Compat-
ibility Modes”of this LCD display in appendices for your reference.
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Figure 1.1
12
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Front Panel Controls
MENU
Menu button
To pop up the OSD menus.
Select- To select the adjustment
items from OSD menus.
SELECT/AUTO
Select/Auto
Auto- To activate the “Auto
Adjustment”function to obtain
an optimum image.
Brightness Minus/Minus
Brightness Plus/Plus
1. Decreases the brightness of
the display image.
2. Decreases value of the
adjustment items.
1. Increases the brightness of
the display image.
2. Increases value of the
adjustment items.
1. Green indicates the display is
turned on.
Power LED
2. Amber indicates the display
in power-saving mode.
Power Switch
Switches on/off the power of the
LCD display.
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
How to Use the OSD Menus
1. Press the “MENU”button to pop up the on-screen menu and to select
between the four main menus.
2. Choose the adjustment items by pressing the “SELECT/AUTO”button.
3. Adjust the value of the adjustment items by pressing the “|”or “}”button.
4. Once you don’t operate the OSD menus after a pre-set time, the OSD
menus will automatically disappear.
5. To disable the OSD menu buttons, please follow the instructions below.
Please note: the monitor has to be ON with a valid signal present.
a. Press and hold the “-”key.
b. With the “-”key held down, press and hold the “Menu”key for 3 seconds.
c. The wording “OSD Locked”will appear for 3 seconds on the monitor. This
indicates that all the front buttons, with the exception of the power
button, are now disabled.
6. To enable the OSD menu buttons, please follow the instructions below.
Please note: the monitor has to be ON with a valid signal present.
a. Press and hold the “-”key.
b. With the “-”key held down, press and hold the “Menu”key for 3 seconds.
c. The wording “OSD Unlocked”will appear for 3 seconds on the monitor.
This indicates that all the front buttons are now enabled.
14
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
First OSD Menu:
}
}
}
}
}
Auto-Adjustment*
Choose this function to obtain an optimum image.
Contrast
Adjusts the contrast of the display image.
Horizontal Position*
Changes the horizontal position of the image.
Vertical Position*
Changes the vertical position of the image.
Clock*
Changes the display data frequency to match the frequency of your
graphics card. When you are experiencing vertical flickering bar, use this
function to make an adjustment.
}
Phase*
Synchronizes the signal timing of the display with the graphic card.
When you are experiencing unstable to flickering image, use this
function to make an adjustment.
P.S. The symbol (*) indicates that function will be disabled under Digital mode
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
15
On-Screen Display Menus
Second OSD Menu:
}
Display Mode
Selects this function to demonstrate the display resolution, vertical
refresh, and horizontal scan of the current mode.
}
}
}
}
OSD Off-Time
Adjusts the time period for OSD menu disappear.
Language
Chooses the language you need.
Sharpness
Adjust the sharpness of the image.
Reset
Returns the display parameters of the current mode to its factory
default settings.
16
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Third OSD Menu:
}
}
}
Volume
It allows you to control the volume sound.
Mute
It allows you to disable the sound immediately.
Input Select
It allows you to change the video mode between multiple connections.
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
17
On-Screen Display Menus
Fourth OSD Menu:
}
}
}
}
Color Setting
Adjusts the color temperature.
Color Adjustment-Red
It allows you to adjust the red color of the display.
Color Adjustment-Green
It allows you to adjust the green color of the display.
Color Adjustment-Blue
It allows you to adjust the blue color of the display.
18
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If
the problem persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
}
Check that all the I/O and power connectors are installed correctly and
well connected as described in the “Installation”section.
}
Make sure the pins of the connectors are not crooked or broken.
Problem: Partial image or incorrectly displayed image.
}
Check to see if the resolution of your computer is higher than that of the
LCD display.
}
Reconfigure the resolution of your computer to make it less than or
equal to 1280 x 1024.
Problem: Image has vertical flickering line bars.
}
}
Use “Frequency”to make an adjustment.
Check and reconfigure the display mode of the vertical refresh rate of
your graphic card to make it compatible with the LCD display.
Problem: Image is unstable and flickering
Use “Tracking”to make an adjustment.
}
Problem: Image is scrolling
}
Check and make sure the VGA signal cable (or adapter) is well
connected.
}
Check and reconfigure the display mode of the vertical refresh rate of
your graphic card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)
}
Use “Clock”to make an adjustment. If the problem persists,
use “Phase”to make an adjustment.
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Warning Signal
Sometimes you probably will see the warning messages from this LCD screen.
This means that the LCD display cannot exactly receive the signal from the
computer graphic card.
There are three kind of situations may happen. Please check with the con-
nected cables or contact your local dealer for more information.
}
}
}
No Signal
This message means that the LCD display has been powered on but it
cannot receive any signal from the computer graphic card. Check all the
power switches, power cables, and VGA signal cable.
Going to Sleep
This message means that the LCD display is under the power saving
mode. In addition, the LCD display will go to this sleeping mode when
experiencing a sudden signal disconnecting problem.
Unsupport Mode
This message means that the signal of the computer graphic card is not
compatible with the LCD display. When the signal is not included in the
compatibility mode we have listed in the Appendices of this manual, the
LCD display will appear this message.
20
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Dimensions
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Compatibility Modes
V.Frequency
(Hz)
H.Frequency
(kHz)
Mode
Resolution
IBM VGA
IBM VGA
IBM VGA
IBM VGA
640 x 350
640 x 400
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 X 1024
1280 X 1024
640 x 480
640 x 480
832 x 624
1024 x 768
70
70
70
60
72
75
56
60
72
75
60
70
75
60
75
67
67
75
75
31.5
31.5
31.5
31.5
37.9
37.5
35.2
37.9
48.1
46.9
48.4
56.5
60.0
64.0
80.0
34.9
35.0
49.7
60.2
VESA VGA
VESA VGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA XGA
VESA XGA
VESA SXGA
VESA SXGA
VESA SXGA
Apple Macintosh LC
Apple Macintosh II
Apple Macintosh
Apple Macintosh
22
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Touchscreen Driver Installation
Driver Installation for PT191MU: Capacitive Touchscreen with
USB Connection.
Touch driver information is located on the enclosed CD-ROM for the following
operating systems: Microsoft Windows® XP, Windows 2000, Windows NT 4.0,
Windows Me, and Windows 9X and Linux.
Disconnect the USB Cable between the display and PC before installing the
Driver.
1. Open the CD-Rom.
2. Select the link for your monitor model and PC operating system you are
using for either Windows or Linux.
3. The driver will automatically open.
4. Follow the installation instructions.
5. When driver installation is complete, reconnect the USB cable.
6. Open the 3M Touchware icon located on your PC‘s desktop.
7. Select the “Calibrate”tab and follow the calibration instructions.
8. If the touchscreen driver does not automatically load, restart the computer
operating system.
For Linux users open the “TWLinux 5.62.1” director and open the
“readme.txt” file for installation instructions.
PT191MU User’s Guide (020-0418-00 B)
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Planar Systems, Inc.
Customer Service
1195 NW Compton Drive
Beaverton, OR 97006-1992
Tel: 1-866-PLANAR1 (866) 752-6271 (US only)
1-503-748-5799 (outside the US)
Email: [email protected]
Hours: M-F, 5am - 5pm Pacific Time
© 2006 Planar Systems, Inc. 11/06 Planar is a registered trademark of Planar Systems, Inc.
Other brands and names are the property of their respective owners.
Technical information in this document is subject to change without notice.
Document No. 020-0418-00 Rev B
P/N: 36.59504G002 Rev D
Download from Www.Somanuals.com. All Manuals Search And Download.
|