Pioneer Stereo System VSX 21 User Manual
AUDIO/VIDEO  
MULTI-CHANNEL RECEIVER  
VSX-21  
Operating Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
READ INSTRUCTIONS — All the safety and operating  
GROUNDING OR POLARIZATION  
OBJECT AND LIQUID ENTRY — Never push objects of  
instructions should be read before the product is  
operated.  
If this product is equipped with a polarized alternating  
current line plug (a plug having one blade wider than  
the other), it will fit into the outlet only one way. This  
is a safety feature. If you are unable to insert the plug  
fully into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
any kind into this product through openings as they  
may touch dangerous voltage points or short-out  
parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
RETAIN INSTRUCTIONS — The safety and operating  
instructions should be retained for future reference.  
HEED WARNINGS — All warnings on the product and  
in the operating instructions should be adhered to.  
FOLLOW INSTRUCTIONS — All operating and use  
instructions should be followed.  
SERVICING — Do not attempt to service this product  
yourself as opening or removing covers may expose  
you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
CLEANING — Unplug this product from the wall outlet  
before cleaning. The product should be cleaned only  
with a polishing cloth or a soft dry cloth. Never clean  
with furniture wax, benzine, insecticides or other  
volatile liquids since they may corrode the cabinet.  
ATTACHMENTS — Do not use attachments not  
recommended by the product manufacturer as they  
may cause hazards.  
WATER AND MOISTURE — Do not use this product  
near water — for example, near a bathtub, wash  
bowl, kitchen sink, or laundry tub; in a wet basement;  
or near a swimming pool; and the like.  
ACCESSORIES — Do not place this product on an  
unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child or  
adult, and serious damage to the product. Use only  
with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with  
the product. Any mounting of the product should  
follow the manufacturer’s instructions, and should  
use a mounting accessory recommended by the  
manufacturer.  
CART — A product and cart combination should be  
moved with care. Quick stops, excessive force, and  
uneven surfaces may cause the product and cart  
combination to overturn.  
If this product is equipped with a three-wire  
grounding type plug, a plug having a third (grounding)  
pin, it will only fit into a grounding type power outlet.  
This is a safety feature. If you are unable to insert the  
plug into the outlet, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the grounding type plug.  
DAMAGE REQUIRING SERVICE — Unplug this product  
from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
When the power-supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into  
the product.  
If the product has been exposed to rain or water.  
If the product does not operate normally by following  
the operating instructions. Adjust only those controls  
that are covered by the operating instructions as an  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the product to its  
normal operation.  
POWER-CORD PROTECTION — Power-supply cords  
should be routed so that they are not likely to be  
walked on or pinched by items placed upon or  
against them, paying particular attention to cords at  
plugs, convenience receptacles, and the point where  
they exit from the product.  
OUTDOOR ANTENNA GROUNDING — If an outside  
antenna or cable system is connected to the product,  
be sure the antenna or cable system is grounded so  
as to provide some protection against voltage surges  
and built-up static charges. Article 810 of the National  
Electrical Code, ANSI/NFPA 70, provides information  
with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and  
requirements for the grounding electrode. See Figure  
A.  
LIGHTNING — For added protection for this product  
during a lightning storm, or when it is left unattended  
and unused for long periods of time, unplug it from  
the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the product  
due to lightning and power-line surges.  
POWER LINES — An outside antenna system should  
not be located in the vicinity of overhead power lines  
or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When  
installing an outside antenna system, extreme care  
should be taken to keep from touching such power  
lines or circuits as contact with them might be fatal.  
OVERLOADING — Do not overload wall outlets,  
extension cords, or integral convenience receptacles  
as this can result in a risk of fire or electric shock.  
If the product has been dropped or damaged in any  
way.  
When the product exhibits a distinct change in  
performance — this indicates a need for service.  
REPLACEMENT PARTS — When replacement parts  
are required, be sure the service technician has used  
replacement parts specified by the manufacturer or  
have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
SAFETY CHECK — Upon completion of any service or  
repairs to this product, ask the service technician to  
perform safety checks to determine that the product  
is in proper operating condition.  
WALL OR CEILING MOUNTING — The product should  
not be mounted to a wall or ceiling.  
HEAT — The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce  
heat.  
VENTILATION — Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable  
operation of the product and to protect it from  
overheating, and these openings must not be  
blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug,  
or other similar surface. This product should not be  
placed in a built-in installation such as a bookcase or  
rack unless proper ventilation is provided or the  
manufacturer’s instructions have been adhered to.  
POWER SOURCES — This product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of  
power supply to your home, consult your product  
dealer or local power company.  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
LOCATION – The appliance should be installed in a  
stable location.  
NONUSE PERIODS – The power cord of the appliance  
should be unplugged from the outlet when left  
unused for a long period of time.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
Fig. A  
NEC — NATIONAL ELECTRICAL CODE  
3
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
R
DTS (Digital Theater Systems) decoder equipped  
DTS is a digital sound system introduced in theaters. Playback of DVD, LD, and CD recorded in DTS audio  
creates the environment of a theater or the sensation of a concert hall in your home.  
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.  
Manufactured under licence from Digital Theater Systems, Inc.  
Dolby Digital and Dolby Pro Logic  
No need to worry about program formats! When playing Dolby Digital or Dolby Pro Logic software in the  
(Dolby)  
mode, decoding switches automatically according to the input signal. All you have to do is sit back and enjoy!  
(When connecting a DVD/LD player or LD player using the AC-3 RF output, a commercially available RF  
demodulator (RFD-1) is required.)  
Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic”, “ and double-D  
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby  
Laboratories, Inc. All rights reserved.  
CINEMA Re-EQ  
In a theater the room is very large and dead sounding, you sit a long way back from the speaker and the speakers  
themselves are very specialized. Because a soundtrack recorded in this dead sounding space when it is played at  
home it sounds overbright. THX Re-Equalization adjusts for this difference in a very precise way.  
ADVANCED THEATER modes  
Four sound modes that enhance DTS and Dolby audio performance by simulating the environment of a movie  
theater (DRAMA, ACTION), or the ambience of a concert hall (MUSICAL). With 5-D THEATER, you can enjoy Dolby  
Pro Logic encoded software in simulated Dolby Digital.  
Various Surround Effects (DSP)  
The DSP (Digital Signal Processing) surround mode allows you to transform your living room into six different  
sonic environments when listening to music or watching movies.  
Midnight Listening Mode  
When late night hours or other factors require that the volume be kept low, the surround effects may tend to  
become less than satisfactory. When the midnight listening mode is on, you can enjoy the effects of quality  
surround sound even at low volumes.  
Optical Digital Output  
The digital signal input can be directly output to digital recording components such as MD, DAT and CD-R from  
the optical digital output jack to create digital recordings.  
DIGITAL NR function  
Noise in the playback source can be reduced to a minimum so you can enjoy a clearer sound.  
5.1 Channel Input  
By connecting components equipped with 5.1 channel output to the DVD 5.1 channel input on this unit, you can  
enjoy 5.1 channel surround sound. Connections can be made to a DVD player or Multi channel decoder equipped  
with 5.1 channel analog output jacks.  
5 Channels of Independent Amplification  
This receiver incorporates 5 independent 100 watt power amplifiers which enable high quality playback of Dolby  
Digital and DTS surround sound. This construction provides improved linearity and accurate reproduction of each  
channel for true high fidelity reproduction from even the most demanding Dolby Digital program sources.  
Remote Control of Other Components  
The supplied remote control can be used to operate a variety of other components simply by recalling the  
appropriate preset code. In addition, the multi-operation functions allow you to perform a variety of operations  
automatically.  
The Energy-saving Design  
This unit is designed to use minimal electricity when power is switched OFF (during Standby). Regarding the value  
of the power consumption in standby mode, refer to “Specifications” on page 57.  
4
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introductory Information............................................................ 6  
Checking the Supplied Accessories.......................................................... 6  
How to Use This Manual ........................................................................... 6  
Preparing the Remote Control .................................................................. 6  
Receiver Installation................................................................................... 7  
When Making Cable Connections............................................................. 7  
Connections................................................................................. 8  
Antennas ..................................................................................................... 8  
Audio Components Connections .............................................................. 9  
Video Components Connections ............................................................ 10  
Digital Connections .................................................................................. 11  
DVD 5.1 Channel Connection .................................................................. 12  
Speakers ................................................................................................... 13  
Preparations .............................................................................. 16  
Setting Up for Surround Sound.............................................................. 16  
Setting Up the Remote Control............................................................... 22  
Clearing the Remote Control Settings.................................................... 23  
Names of Parts and Basic Operations..................................... 24  
Display ...................................................................................................... 24  
Remote Control ........................................................................................ 25  
Front Panel................................................................................................ 26  
Sound Modes ............................................................................ 28  
Switching ANALOG/DIGITAL Signal Input ............................................. 29  
Playing Sources with Dolby Digital or DTS Sound ............................... 30  
Selecting a Sound Mode ......................................................................... 31  
CINEMA Re-EQ playback ......................................................................... 33  
Listening in MIDNIGHT Listening Mode ................................................ 35  
Tuner Operations....................................................................... 36  
Automatic and Manual Tuning................................................................ 36  
Direct Tuning ............................................................................................ 37  
Memorizing Frequently Tuned Stations ................................................. 38  
Recalling the Memorized Stations .......................................................... 39  
Other Operations ...................................................................... 40  
Playback .................................................................................................... 40  
Recording from Audio Components ...................................................... 42  
Recording from Video Components ....................................................... 43  
Remote Controlling Other Components ................................................ 44  
Background Control of Other Components ........................................... 51  
Additional Information ............................................................. 52  
Dolby Digital ............................................................................................. 52  
DTS ............................................................................................................ 53  
Troubleshooting ....................................................................................... 54  
Preset Code List........................................................................................ 56  
Specifications ........................................................................................... 57  
5
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introductory Information  
Checking the Supplied Accessories  
Please check that you have received all of the following accessories with the receiver.  
FM wire antenna  
AM loop antenna  
Remote control unit  
“AA” IEC LR6 batteries x 2  
How to Use This Manual  
This manual is divided into two main sections :  
The following marks and symbols are used throughout  
this manual:  
SET UP  
This section explains how to make the necessary  
connections from the receiver to your other audio and  
video components. Receiver operations described later  
in this section under the heading “Preparations” enable  
you to set up and customize your home entertainment  
center.  
Provides additional information, precautions,  
and advice.  
memo  
Indicates a blinking button, indicator, or  
display.  
OPERATION  
This section provides complete information about  
operation of the receiver and supplied remote control.  
Indicates a steadily lit button, indicator, or  
display.  
Preparing the Remote Control  
Loading the batteries  
AA dry cell batteries ((“AA” IEC LR6)×2)  
CAUTION!  
Incorrect use of batteries may result in such hazards  
as leakage and bursting. Observe the following  
precautions.  
(
9
9
(
\
• Never use new and old batteries together.  
• Insert the plus and minus sides of the batteries  
properly according to the marks in the battery case.  
• Batteries with the same shape may have different  
voltages. Do not use different batteries together.  
When you notice a decrease in the operating range of  
the remote control, replace all batteries with new ones.  
When changing the batteries, it is  
memo  
recommended that you load new batteries  
within five minutes of removing the old  
batteries. If not, the preset codes may be  
canceled and you will need to set them again.  
Power connection  
[SWITCHED 100 W (0.8 A) MAX]  
Switching this receiver on or putting it in standby also switches components connected to the receiver’s AC OUTLET  
jacks on and off. When connecting components to the AC OUTLET jacks, leave the power switch of the connected  
components in the ON position. Total power consumption of connected components should not exceed 100W (0.8 A) .  
CAUTION!  
• To avoid malfunction, overheating, and possible fire risk, do not connect high-wattage appliances such as blow  
dryers and irons to the AC OUTLET jacks.  
• Do not connect a monitor or TV set.  
Even if the power consumption of the TV or monitor is within the acceptable limits, when monitors or TV sets are  
switched on, they consume a large amount of power and may exceed the capacity of this receiver.  
6
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introductory Information  
Operating range of remote control unit  
Operating other PIONEER components  
Connecting an optional control cord allows you to  
operate other PIONEER components simply by pointing  
the receiver’s remote control at the remote sensor on the  
front panel of the receiver. The receiver then sends the  
remote control signals to the other devices via the  
CONTROL OUT terminal.  
Point the remote control toward the remote sensor Î on  
the front panel of this unit to operate. The remote control  
unit will operate the receiver for up to a distance of 23  
feet (7 m) within 30° angle on each side of the sensor of  
the remote sensor as illustrated below.  
CONTROL  
OUT  
IN  
CONTROL  
IN  
OUT  
Receiver  
30  
30  
PIONEER component  
bearing the Î mark.  
23 feet(7m)  
To CONTROL IN  
terminal of another  
PIONEER component  
bearing the Î mark.  
Remote control may not function properly if :  
• There are obstacles between the remote  
control and the remote sensor.  
memo  
Remote Control  
• Direct sunlight or fluorescent light is shining  
onto the remote sensor.  
You can also control PIONEER components  
(and those made by other manufacturers) by  
pointing the receiver’s remote control directly  
at the respective component. This type of  
operation does not require control cords. All  
you have to do is recall the appropriate preset  
code (Refer to “Recalling preset codes” on  
page 22).  
memo  
• The receiver is located near a device  
emitting infrared rays.  
• Operated simultaneously with another  
remote control which uses infrared rays.  
Receiver Installation  
• Do not place objects directly on top of this unit. It will prevent proper heat dispersal.  
• When installing in a rack, etc., be sure to leave more than 8 inches of space above the receiver.  
It is recommended that you place the  
memo  
receiver to the left of your cassette and/  
or video decks. This will prevent noise  
caused by leakage flux from the  
Leave more than 8 inches (20 cm)  
transformer in the receiver. If you  
experience noise during playback of  
your cassette and/or video decks, move  
them farther away from the receiver.  
Receiver  
When Making Cable Connections  
Be careful not to arrange cables in a manner that bends  
the cables over the top of this unit as shown in the  
illustration. If the cables are brought over this unit, the  
magnetic field produced by the transformers in this unit  
may cause a humming noise to come from the speakers.  
7
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Antennas  
FM wire antenna  
Connect the FM wire antenna and fully extend (for best reception, attach horizontally along  
a window frame, etc.).  
AM loop antenna  
(See below)  
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
DIGITAL IN  
A
B
OPT  
1
FM  
UNBAL  
75Ω  
AM  
PCM/  
/DTS  
LOOP  
R
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
L
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
AC 120V  
60Hz  
DIGITAL  
OUT  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
COAX  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKERS  
SPEAKER  
PARLEUR  
R
R
8~16Ω / SPEAKER  
8~16Ω / SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
7 AM loop antenna  
1 Assemble the antenna.  
2 Twist exposed wire strands  
together and insert into AM  
antenna terminals.  
3 Attach to a wall, etc. (if desired)  
and face toward the direction  
providing the best reception.  
3/8 in.(10mm)  
Using external antennas  
7 To improve AM reception  
7 To improve FM reception  
Connect a 15 to 18 feet (5~6 m) length of vinyl-coated wire to the AM  
antenna terminal in addition to the supplied AM loop antenna.  
Connect an external FM antenna.  
For the best possible reception, suspend horizontally outdoors.  
Outdoor antenna  
75 Ω coaxial cable  
Indoor antenna  
(Vinyl-coated wire)  
15~18 feet (5~6 m)  
H
GND  
FM  
AM  
FM  
UNBAL  
75Ω  
AM  
LOOP  
ANTENNA  
LOOP  
ANTENNA  
UNBAL  
75Ω  
H
GND  
8
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Audio Components Connections  
Be sure to switch power to standby and remove the power cord from the wall outlet when you make or change  
connections.  
Connect your audio components as shown below. Refer to “Digital Connections” on page 11 when making digital  
connections from your DVD or LD player.  
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
DIGITAL IN  
OPT  
A
B
FM  
UNBAL  
75Ω  
AM  
1
PCM/  
/DTS  
LOOP  
R
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
L
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
AC 120V  
60Hz  
DIGITAL  
OUT  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
COAX  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKERS  
SPEAKER  
PARLEUR  
R
R
8~16Ω / SPEAKER  
8~16Ω / SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
»
«
«
»
PLAY  
REC  
PLAY  
REC  
»
OUTPUT  
L
L
L
L
L
R
R
R
R
R
MD recorder  
or Cassette deck  
Cassette deck  
CD player  
*The arrows indicate the direction of the audio signal.  
7 Audio cords  
Use audio cords (not supplied) to connect the audio  
components.  
Cassette deck placement  
Depending on where the cassette deck is placed, noise  
may occur during playback of your cassette deck which  
is caused by leakage flux from the transformer in the  
receiver. If you experience noise, move the cassette deck  
farther away from the receiver.  
L
Connect red plugs to R (right)  
and white plugs to L (left).  
Be sure to insert completely.  
R
9
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Video Components Connections  
• When connecting components, the receiver should be off and the power cord unpluged.  
• Connect your video components as shown below. Also, refer to “Digital Connections” on page 11 when making  
digital connections from your DVD or LD player.  
• Although only “S2” is printed on the S-Video jacks on the rear panel, S, S1 and S2 S-video connection can be made  
as well.  
• If your TV monitor or video camera has an S-Video input, clearer picture reproduction is possible by connecting the  
receiver to your TV monitor or video camera via the S-Video jack.  
Video deck (2)  
Video deck (1)  
TV  
monitor  
OUTPUT  
V
INPUT  
OUTPUT  
V
INPUT  
V
L
V
L
L
L
INPUT  
R
R
R
R
VIDEO  
S-VIDEO  
«
»
»
«
»
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
DIGITAL IN  
OPT  
A
FM  
AM  
1
PCM/  
/DTS  
UNBAL  
LOOP  
R
75Ω  
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
B
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
L
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
AC 120V  
60Hz  
DIGITAL  
OUT  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
COAX  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKERS  
SPEAKER  
PARLEUR  
R
R
8~16Ω / SPEAKER  
8~16Ω / SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
»
»
OUTPUT  
7 Front  
OUTPUT  
VIDEO INPUT  
S-VIDEO VIDEO  
L
AUDIO  
R
V
V
L
L
Video camera  
(etc.)  
R
R
VIDEO INPUT  
L
R
TV tuner  
(or satellite tuner)  
DVD player  
(or LD player)  
7 Audio/Video cords  
Use audio/video cords (not supplied) to connect the  
video components and a video cord to connect the TV  
or monitor.  
memo  
When connecting components equipped with  
S-video jacks, you can make connections to  
this unit using S-video cords (not supplied).  
However, this unit is not designed to convert  
the format of the video signal. Therefore, the  
signal from the S2 IN cannot be output from  
the VIDEO OUT and similarly the signal from  
the VIDEO IN cannot be output from the S2  
OUT.  
VIDEO  
Connect red plugs to R (right),  
white plugs to L (left), and the  
yellow plugs to VIDEO.  
L
Be sure to insert completely.  
R
10  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Digital Connections  
Digital components can be connected as shown below. You can select up to four of the following be assigned to the  
digital inputs on this unit: DVD/LD, TV/SAT, MD/TAPE, CD, VCR1 (VCR). To assign the digital inputs, refer to “Setting Up  
for Surround Sound” on page 16.  
The digital signal input is output directly to digital recording components from the optical digital output jack.  
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
L
DIGITAL IN  
OPT  
A
B
FM  
AM  
1
PCM/  
/DTS  
UNBAL  
75Ω  
LOOP  
R
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
AC 120V  
60Hz  
DIGITAL  
OUT  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
COAX  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKER  
SPEAKERS  
PARLEUR  
R
R
8~16Ω / SPEAKER  
8~16Ω / SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
»
»
»
»
»
DIGITAL  
IN  
DIGITAL  
OUT  
DIGITAL  
OUT  
COAX  
OUT  
DIGITAL  
OUT  
TV tuner  
(or satellite tuner)  
MD recorder  
CD player  
DVD player  
memo  
7 Digital audio cords/Optical cables  
When playing LD recorded in Dolby Digital  
When connecting a DVD/LD player or LD player using  
the AC-3 RF output, a commercially available RF  
demodulator (RFD-1) is required. The RF demodulator  
changes the RF signal to a digital signal which is then  
processed by the receiver through the digital input  
jacks. For more details, refer to the instruction manual  
supplied with the RFD-1.  
Commercially available digital audio coaxial cords  
(standard video cords can also be used) or optical  
cables (not supplied) are used to connect digital  
components to this receiver.  
When you use optical digital input or output terminals,  
pull off the caps and insert the plugs. Be sure to insert  
completely.  
The factory setting for each of the digital inputs is  
Digital audio cord  
Optical cable  
described below.  
COAX : DVD  
OPT 1 : CD  
(or standard video cord)  
OPT 2 : MD  
OPT 3 : TV  
11  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
DVD 5.1 Channel Connection  
DVD and LD discs are often compatible with both 2 channel and 5.1 channel audio output formats. Refer to page 33 for  
more information on how to switch between the two input methods.  
Connections can be made from a DVD player or Multi channel decoder equipped with 5.1 analog outputs to the 5.1  
analog inputs on this unit.  
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
L
DIGITAL IN  
OPT  
A
B
FM  
AM  
1
PCM/  
/DTS  
UNBAL  
75Ω  
LOOP  
R
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
AC 120V  
60Hz  
DIGITAL  
OUT  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
COAX  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKERS  
SPEAKER  
PARLEUR  
R
R
8~16Ω / SPEAKER  
8~16Ω / SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
»
»
»
»
»
SURROUND  
OUTPUT  
FRONT  
OUTPUT  
VIDEO  
OUT  
SUB  
WOOFER  
CENTER  
L
L
R
R
Components equipped  
with 5.1 channel analogue  
output jacks  
memo  
The 5.1 channel input can only be used when DVD/LD is selected.  
12  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Speakers  
• Use speakers with a nominal impedance of 6 Ω to 16 Ω.  
• The front speaker B terminal is only used in stereo mode (Not available during DVD 5.1 channel, DSP mode, or Dolby/  
DTS mode).  
• When you use the speaker on your TV as a center speaker, please connect the CENTER PREOUT jack on this unit to  
the audio input jack on your TV. In this case, the center speaker shown below is unnecessary. Refer to the instruction  
manual supplied with the TV or monitor you are connecting to for more information.  
• You can set the configuration of your speaker system, whether the sizes of the speakers are large or small, and  
whether or not you have a sub woofer connected. (Refer to pages 16 to 18)  
TV  
Front Speakers  
Center Speaker  
C
Surround Speakers  
SR  
(To be used as the  
center speaker)  
R
L
SL  
(To the audio input)  
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
DIGITAL IN  
OPT  
A
B
FM  
UNBAL  
75Ω  
AM  
1
PCM/  
/DTS  
LOOP  
R
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
L
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
DIGITAL  
OUT  
COAX  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
AC 120V  
60Hz  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKERS  
SPEAKER  
PARLEUR  
R
R
8~16Ω  
8~16Ω  
/
/
SPEAKER  
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
Use speakers with nominal  
Powered Sub Woofer  
impedance of 6 Ω to 8 Ω or 8 Ω to  
16 Ω.  
• When using speakers with  
impedance of at least 6 Ω but less  
than 8 Ω, set the IMPEDANCE  
SELECTOR to the “6~LESS THAN  
8 Ω” position.  
• When using 8 Ω to 16 Ω, set the  
IMPEDANCE SELECTOR to “8~16  
Ω” position.  
INPUT  
Be sure to complete  
all other connections  
before connecting  
this unit to the AC  
power source.  
Connection methods that differ from the example  
shown in this manual may be available. For more  
details, refer to the instruction manual supplied with  
the sub woofer.  
Turn counter-clockwise to loosen, and insert the wire. Then turn  
clockwise to tighten.  
7 Speaker terminals  
Twist exposed wire  
strands together.  
3/8 in.(10mm)  
13  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting additional amplifiers  
To use separate amplifiers to power your speaker, make the connections shown below.  
Do not make simultaneous connections to both the CENTER PREOUT jack and the CENTER SPEAKER  
terminals. (e.g. Do not connect a separate power amplifier to the CENTER PREOUT jack if you have already  
connected a center speaker to the CENTER SPEAKER terminal.)  
memo  
PIONEER  
Powered  
projection TV  
sub woofer  
(for center  
channel)  
Amplifier  
Amplifier  
Amplifier  
(for center channel)  
(for front channel)  
(for rear channel)  
L-Audio  
(MONO)  
(or)  
AUDIO  
AUDIO  
IN  
AUDIO  
IN  
IN  
INPUT  
L
L
L
R
R
R
»
»
»
»
FRONT SPEAKERS  
FRONT  
ANTENNA  
PREOUT  
R
L
L
DIGITAL IN  
OPT  
A
B
FM  
AM  
1
PCM/  
/DTS  
UNBAL  
LOOP  
R
75Ω  
ANTENNA  
IN  
IN  
IN  
OUT  
IN  
OUT  
OPT  
2
DVD 5.1 CH  
INPUT  
S2  
OUT  
TO  
SURROUND  
OPT  
3
MONITOR TV  
L
SUBWOOFER  
S2  
IN  
S2  
IN  
S2  
IN  
S2  
S2  
IN  
S2  
L
R
CENTER  
PREOUT  
VIDEO  
CONTROL  
VIDEO  
OUT  
OPT  
OUT  
IN  
OUT  
OUT  
AC OUTLET  
AC 120V  
60Hz  
DIGITAL  
OUT  
COAX  
L
CAUTION:  
SEE INSTRUCTION  
MANUAL  
SORROUND  
PREOUT  
R
IN  
CENTER  
OUT  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
IN  
OUT  
ATTENTION:  
SEE INSTRUCTION  
MANUAL  
R
L
L
6~LESS THAN  
PCM/  
/DTS  
DIGITAL  
IN  
SUBWOOFER  
PREOUT  
8Ω /SPEAKER  
6~MOINS DE  
8Ω /HAUT-  
CENTER  
SURROUND  
SPEAKERS  
SPEAKER  
PARLEUR  
R
R
8~16Ω  
8~16Ω  
/
/
SPEAKER  
SPEAKER  
TV/  
SAT  
DVD/  
LD  
DVD 5.1 CH  
FRONT  
PLAY  
REC  
PLAY  
REC  
VCR 1  
VCR 2  
MD/TAPE 1  
CD  
TAPE 2 MONITOR  
IMPEDANCE SELECTOR  
Be sure to complete all other  
connections before connecting  
this unit to the AC power source.  
14  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Speaker placement  
To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed  
securely to prevent accidents and improve sound quality.  
Sub Woofer  
Front  
Left  
Front  
Right  
Center  
Surround  
Left  
Surround  
Right  
Listening  
Position  
• Install the left and right front speakers at equal distances from the TV.  
memo  
• When installing speakers near the TV, we recommend using magnetically shielded speakers to prevent  
possible interference such as distortion in the color of the TV screen. If you do not have magnetically  
shielded speakers and notice discoloration of the TV screen, place the speakers farther away from the TV.  
• Install the center speaker above, below the TV so that the sound of the center channel is localized at the TV  
screen.  
CAUTION:  
When installing the center speaker on top of the TV, be sure to secure it with tape or some other suitable  
means.  
Otherwise, the speaker may fall from the TV due to external shocks such as earthquakes, and it may lead to  
endangering those nearby or damaging the speaker.  
• If possible, install the surround speakers slightly above ear level.  
• It may be difficult to obtain a cohesive surround effect if the surround speakers are installed farther away  
from the listening position than the front and center speakers.  
15  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Setting Up for Surround Sound  
Be sure to switch the power of this unit on (The STANDBY indicator goes out).  
To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly  
important when using the  
(Dolby)/DTS sound mode. You only need to make these settings once (unless you change  
the placement of your current speaker system or add new speakers, etc.). Refer to the following pages for detailed  
descriptions of the settings available for each mode.  
1 Press RECEIVER to turn the power on.  
The STANDBY indicator goes out.  
RECEIVER  
TV  
3
1
2 Press RECEIVER.  
FQ  
+
This switches the remote to the surround setup mode.  
ENTER  
4
–
FQ  
VOL  
VOL  
3 Press ! or ⁄ to select the mode you desire.  
CHANNEL  
For best results, start with “SPEAKER setting mode” and make your  
initial adjustments in the order described below.  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
The current settings are displayed automatically.  
TV CONTROL  
RECEIVER  
VCR 1  
VCR 2  
TUNER  
SPEAKER (Front, Center, Surround) setting mode (page 17)  
Use to specify the type of speakers you have connected.  
SUB WOOFER ON/OFF setting mode (page 18)  
Use to specify the sub woofer as on or off.  
Crossover frequency setting mode (page 18)  
Use to determine which frequencies will be sent to the sub woofer or  
“Large” speakers.  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
2
CH.SELECT TEST TONE  
ATT  
SIG.SELECT  
6
0
5
7
8
CN.LEVEL  
EFFECT  
9
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
LFE attenuator setting mode (page 18)  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
Use to specify the peak level for the LFE channel and the crossover  
network for rerouted bass frequencies.  
Low cut filter ON/OFF setting mode (page 19)  
Use to cut the distorted sound from the sub woofer.  
FRONT speaker distance setting mode (page 19)  
Use to specify the distance from your listening position to your front speaker.  
CENTER speaker distance setting mode (page 19)  
memo  
Use to specify the distance from your listening position to your center speaker.  
SURROUND speaker distance setting mode (page 19)  
Use to specify the distance from your listening position to your surround speakers.  
Dynamic range control setting mode (page 20)  
Use to compress the dynamic range of the sound track.  
Coaxial digital input setting (page 20)  
• Press ENTER to to exit the setting mode.  
• The setting mode is automatically exited  
if no operation is performed for 20  
seconds.  
Use to specify the input to be assigned to the coaxial digital input.  
Optical digital input 1 setting (page 20)  
Use to specify the input to be assigned to the optical digital input 1.  
Optical digital input 2 setting (page 20)  
Use to specify the input to be assigned to the optical digital input 2.  
Optical digital input 3 setting (page 21)  
Use to specify the input to be assigned to the optical digital input 3.  
4 Press % or fi to select the setting you desire.  
The setting is entered automatically.  
5 Repeat steps 3 and 4 to set other surround modes.  
16  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
SPEAKER setting mode  
Establishes the size and configuration of the speaker system you have connected.  
In the display, “F”, “C”, and “S” refer to front, center, and surround speakers respectively. Speaker size is denoted as  
“L” for large speakers, “S” for small speakers, and “ ” (asterisk) if no speaker is connected.  
∗
memo  
If the cone size of your speaker is larger than 5 in. (12 cm), please set to Large.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
1 Press % or fi to set the front speaker.  
dB  
Front speaker (initial setting is “L (Large)”)  
• Select “FL” if your speakers will reproduce bass frequencies effectively or  
if you did not connect a sub woofer.  
• Select “FS” to send bass frequencies to the sub woofer. (The center and  
surround speakers cannot be set to Large if the front speakers are set to  
Small. In this case, all bass frequencies are sent to the sub woofer.)  
SP  
A
SIGNAL  
SELECT  
ANALOG  
2 Press % or fi to set the center speaker.  
dB  
Center speaker (initial setting is “L (Large)”)  
• Select “CL” if your speaker will reproduce bass frequencies effectively.  
• Select “CS” to send bass frequencies to the other speakers or sub woofer.  
• Select “C ” if you did not connect a center speaker. In this case, the  
∗
center channel is output from the front speakers.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
3 Press % or fi to set the surround speaker.  
dB  
Surround speaker (initial setting is “L (Large)”)  
• Select “SL” if your speakers will reproduce bass frequencies effectively.  
• Select “SS” to send bass frequencies to the other speakers or sub woofer.  
* Press ⁄ to advance to the  
next setting, and press ! to  
return to previous setting.  
• Select “S ” if you did not connect surround speakers. In this case, the  
∗
sound of the surround channels is output from the front and center  
speakers.  
17  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
SUB WOOFER ON/OFF setting mode  
Sets whether the SUB WOOFER is used or not.  
• Initial setting is “ON”.  
memo  
• Setting the front speaker size to “Small” in the SPEAKER setting mode automatically locks the sub woofer  
in the “ON” position.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to select sub woofer ON or OFF.  
dB  
Crossover frequency setting mode  
Setting speakers to “Small” in “SPEAKER setting mode” sends the respective channels’ bass frequencies to the sub  
woofer (or “Large” speakers). This function lets you determine which frequencies will be sent to the sub woofer or  
“Large” speakers.  
• Initial setting is “100 Hz”.  
memo  
• If all speakers (front, center, and surround) are set to “Large” in SPEAKER setting mode, crossover  
frequency cannot be set. (  
appears in the display  
.)  
∗∗∗  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to specify the crossover frequency for your small  
speakers (100 Hz, 150 Hz or 200 Hz).  
dB  
100 Hz  
Sends bass frequencies below 100 Hz to the sub woofer (or Large  
speakers).  
150 Hz  
Sends bass frequencies below 150 Hz to the sub woofer (or Large  
speakers).  
200 Hz  
Sends bass frequencies below 200 Hz to the sub woofer (or Large  
speakers). We recommend setting 200 Hz when only small speakers  
are used.  
LFE attenuator setting mode  
Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as needed to prevent the  
ultra-low bass tones from distorting the sound from the speakers.  
• Initial setting is “0 dB”.  
memo  
• When ∞ is selected (  
appears in the display), LFE is not available.  
∗∗  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to set the attenuation level (0 dB, 10 dB  
dB  
or  
dB (∞)).  
∗∗  
18  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Low cut filter ON/OFF setting mode  
Turn the low cut filter ON when distorted sound is output through the sub woofer.  
• Initial setting is “OFF”.  
memo  
• If the SUB WOOFER is set to “OFF” in the SUB WOOFER ON/OFF setting mode, the low cut filter cannot be  
set.  
• The low cut filter is not effective when DTS signals are input.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to select low cut filter ON or OFF.  
dB  
FRONT speaker distance setting mode  
Sets the distance from the FRONT speaker to the listening position.  
• Initial setting is 10 feet.  
memo  
• One step equals about 1 foot.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to set the distance of the FRONT speaker from  
the main listening position (up to 30 steps).  
dB  
CENTER speaker distance setting mode  
Normally as the Center speaker is placed directly in front in the listening room, it is closer to the listening position than  
the Front speakers. This means that the sound from the Center speaker will be heard before the Front speakers. To  
prevent this, set the Center speaker distance setting to delay the sound from the Center speaker so that the sound from  
the Front and Center speakers will be heard at the same time.  
• Initial setting is 10 feet.  
memo  
• When “C ” is selected in SPEAKER setting mode, the Center distance cannot be set.  
∗
• One step equals about 1 foot.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to set the distance of the CENTER speaker from  
the main listening position (up to 30 steps).  
dB  
SURROUND speaker distance setting mode  
Use to set the SURROUND speaker distance. Like the CENTER speaker position, the SURROUND speakers may be set  
in a location closer or farther than the FRONT speakers. Set the distance of the SURROUND speakers accurately to hear  
sounds coming from both FRONT and SURROUND speakers at the same time.  
• Initial setting is 10 feet.  
memo  
• When “S ” is selected in SPEAKER setting mode, the SURROUND distance cannot be set.  
∗
• One step equals about 1 foot.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to set the distance of the SURROUND speaker  
from the main listening position (up to 30 steps).  
dB  
19  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Dynamic range control setting mode  
Dynamic range is the difference between the loudest and softest sounds in any given signal. The dynamic range control  
helps you play back sounds so the quieter sounds are audible yet the louder sounds don’t get distored. It does this by  
compressing the dynamic range. When watching a movie at low volume, setting this function enables low level sounds  
to be heard more easily.  
• Initial setting is “OFF”.  
memo  
• When the volume level is increased, set to OFF.  
• For listening enjoyment at low volumes, set to “MAX” for maximum dynamic range compression.  
• Dynamic range control is effective only when a Dolby Digital signal is being played back.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to set the dynamic range control (OFF, MAX or  
MID).  
dB  
Coaxial digital input setting  
Sets the input component to be assigned to the coaxial digital input jack.  
memo  
• Initial setting is “DVD”.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to select the coaxial digital input (DVD, TV, CD,  
MD, VCR 1 or OFF).  
dB  
Optical digital input 1 setting  
Sets the input component to be assigned to the optical input 1 jack.  
memo  
• Initial setting is “CD”.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to select the optical digital input 1 (DVD, TV, CD,  
MD, VCR 1 or OFF).  
dB  
Optical digital input 2 setting  
Sets the input to be assigned to the optical input 2 terminal.  
memo  
• Initial setting is “MD”.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to select the optical digital input 2 (DVD, TV, CD,  
MD, VCR 1 or OFF).  
dB  
20  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Optical digital input 3 setting  
Sets the input component to be assigned to the optical input 3 jack.  
• Initial setting is “TV”.  
• You cannot assign the same component to more than one digital input jack. The jack most  
memo  
recently selected is established for the component and the jack formerly selected is turned off.  
• DVD/LD, TV/SAT, CD, MD/TAPE, VCR 1 digital input connection is possible.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
Press % or fi to set the optical digital input 3 (DVD, TV, CD,  
MD, VCR 1).  
dB  
Setting the volume level of each channel (Adjusting the speaker volume balance)  
• Sound from the SUB WOOFER seems quiet.  
• The speaker volume can be adjusted without outputting the test tone by pressing CHANNEL LEVEL or  
CHANNEL SELECT .  
memo  
• Initial setting is 0 dB.  
RECEIVER  
TV  
1 Press  
.
FQ  
+
2 Press VOL + or – to adjust the volume to an appropriate  
level.  
ENTER  
–
FQ  
VOL  
VOL  
CHANNEL  
3 Press TEST TONE to output the test tone.  
2
The test tone is output in the following order.  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
CT  
SL  
FR  
SR  
FL  
VCR 1  
TUNER  
SW  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
1
4
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
• Test tone is only output in Dolby/DTS mode.  
memo  
3,5  
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
4 Adjust speaker levels so that you hear the test tone at  
the same volume from each speaker when seated in the  
main listening position.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
The channel level ranges 10 dB.  
memo  
• Levels can be set for each surround mode.  
5 Press TEST TONE to turn off the test tone.  
21  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Setting Up the Remote Control  
In addition to controlling the receiver, the supplied remote control can operate your other components (DVD, MD, VCR,  
TV, LD, CD, etc.). If your component(s) are listed in the “Preset Code List” on page 56, simply recall the corresponding  
preset code.  
Recalling preset codes  
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the preset code is  
assigned, pressing the button will automatically set the remote to operate the respective component.  
• Refer to “Preset Code List” on page 56 for the components and manufacturers available.  
memo  
• Refer to “Remote Controlling Other Components” on pages 44 to 50 and “Background Control of Other  
Components” on page 51 for detailed explanations on how to operate your other components.  
RECEIVER  
TV  
1 Press COMMANDER SET UP and 1 at the same time to  
select the preset mode.  
FQ  
The MULTI CONTROL buttons on the remote control start to blink.  
+
ENTER  
A
SP  
SIGNAL  
SELECT  
ANALOG  
–
FQ  
dB  
VOL  
VOL  
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
A
SP  
SIGNAL  
SELECT  
ANALOG  
2
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
dB  
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
To cancel the preset mode  
Press COMMANDER SET UP.  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
1
2 Press the MULTI CONTROL button for the component you  
want to control.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
Each button can be set to control one of the following components  
DVD/LD  
: DVD/LD player  
TV/SAT  
: TV or Satellite tuner  
CD  
: CD player  
MD/TAPE  
VCR 1  
: MD recorder or Tape recorder  
: Video deck  
VCR 2  
: Video deck  
TV CONTROL  
: TV or Cable TV tuner  
The selected button lights steadily and the first manufacturer (and  
preset code(s)) appear in the display.  
22  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
3 Press % or fi repeatedly to display the name of the  
component’s manufacturer.  
SP  
A
SP  
A
SIGNAL  
SELECT  
ANALOG  
SP  
A
SIGNAL  
SELECT  
ANALOG  
SIGNAL  
SELECT  
ANALOG  
dB  
dB  
dB  
(“VCR” is displayed on VSX-D508)  
SP  
A
SP  
A
SIGNAL  
SELECT  
ANALOG  
SIGNAL  
SELECT  
ANALOG  
dB  
dB  
A list of all available preset codes is provided on page 56.  
4 Point the remote toward the component to be controlled,  
enter the 3 digit setup code.  
When you enter the setup code, the remote emits a power ON/OFF  
signal. If the component turns ON or OFF, you have entered the proper  
code.  
If the component does not turn ON or OFF and there is more than one  
setup code, press ! or ⁄ to select another code in step 3 or try  
inputting another code (starting again from step 2).  
Some manufacturers use several sets of remote control signals and the  
first code may not correspond to your component.  
SP  
A
SP  
A
SIGNAL  
SELECT  
ANALOG  
SIGNAL  
SELECT  
ANALOG  
dB  
dB  
SP  
A
SP  
A
SIGNAL  
SELECT  
ANALOG  
SIGNAL  
SELECT  
ANALOG  
dB  
dB  
Repeat steps 2 through 4 to assign preset codes for as many  
components as necessary.  
5 Press COMMANDER SET UP to exit the preset mode.  
The remote control returns to the previous operation mode.  
•
•
•
When operating a PIONEER’S DVD/LD player, set the  
manufacturer code to “000” in the preset mode.  
All codes enrolled in the manufacturer code list can be set  
even if a code is not displayed.  
memo  
RECEIVER cannot be preset.  
Clearing the Remote Control Settings  
DSP MODE  
MIDNIGHT  
Clears all presets and restores factory installed presets.  
1
2
3
4
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
Press the COMMANDER SET UP and 0 at the same time for  
more 3 seconds.  
0
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
• All the multi-control buttons on the remote control blinks. After  
blinking three times, all the settings are canceled.  
COMMANDER  
SET UP  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
23  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
Display  
1
8
0
-
=
~
2
3
4 5  
7
9
6
AB  
SP  
H.P  
MONO  
TUNED  
5-D THEATER  
SFC  
ATT  
DIRECT  
SIGNAL  
SELECT  
ANALOG  
DIGITAL  
AC-3  
MIDNIGHT DNR LOUDNESS STEREO  
PRO LOGIC  
DIGITAL  
L
LS  
C
S
R
RS  
DTS  
LFE  
dB  
@
!
#
$
1 SIGNAL SELECT indicators  
8 DNR indicator  
Light to indicate the type of input signal selected for  
the current component (refer to “Front Panel”, @,  
SIGNAL SELECT on pages 26, 27).  
Lights when the DIGITAL NR is on.  
9 LOUDNESS indicator  
Lights when loudness is on (refer to “Front Panel”, 8,  
ANALOG : Lights when the analog audio signals are  
selected.  
LOUDNESS on pages 26, 27).  
DIGITAL : Lights when the digital audio signals are  
0 DIRECT indicator  
selected.  
Lights when direct playback is on (refer to “Front  
AC-3 : Lights when a source with Dolby Digital signals  
is played.  
Panel”, =, DIRECT on pages 26, 27).  
DTS : Lights when a source with DTS audio signals is  
- Tuner indicators  
played.  
STEREO : Lights when an FM stereo broadcast is  
2 Digital indicators  
received in the auto stereo mode.  
TUNED : Lights when a broadcast is received.  
MONO : Lights when the tuner is set to receive FM  
broadcasts in monaural.  
dts : Lights when DTS signals are input. (Dolby/DTS  
mode is ON)  
PRO LOGIC : When the Dolby mode on the receiver  
is on, this indicator lights during 2 channel playback  
of Dolby Digital sources.  
= H.P indicator  
Lights when headphones are plugged in.  
DIGITAL : When the Dolby mode on the receiver is  
on, this indicator lights to indicate playback of a Dolby  
~ Speaker indicators  
Digital signal. However,  
PRO LOGIC lights during 2  
Light to indicate the current speaker system (refer to  
“Front Panel”, 7, SPEAKERS (A/B) on pages 26, 27).  
SP 3 A : Lights when speaker system A is selected.  
channel playback of Dolby Digital.  
3 SFC (DSP) mode indicator  
Lights when the DSP mode or ADVANCED THEATER  
SP 3 B : Lights when speaker system B is selected.  
mode (except for 5-D THEATER) is selected.  
! Program format indicators  
(Refer to “Surround modes” on page 28)  
The following indicators light to show the channels  
being played back.  
4 ATT indicator  
L : Left front*1*2, C : Center*1, R : Right front*1*2,  
LS : Left surround*1,S : Surround (mono)*2,  
RS : Right surround*1  
Lights when ATT (refer to “Remote Control”, 7,  
Number buttons on page 25) is used to reduce the  
level of the input signal (available in ANALOG mode  
only).  
*1: Indicates 5.1ch Dolby Digital/DTS playback.  
*2: Indicates Dolby surround playback.  
5 Overload indicator  
When “ANALOG” is selected in SIGNAL SELECT, this  
indicator lights to show that an excessively strong  
signal is being processed. When this occurs, press  
ATT on the remote control to attenuate the signal.  
Also, when “DIGITAL” is selected in SIGNAL  
SELECTOR, this indicator lights to show that a source  
containing an excessive amount of information is  
being processed.  
@ LFE indicator  
LFE (Low Frequency Effects) indicator lights to  
indicate that the program source contains an LFE  
channel. The indicator to the left of LFE lights during  
actual playback of the LFE signals (LFE signals are not  
present in all parts of the sound track).  
# Character display  
When this occurs, refer to pages 31 and 32.  
$ Volume level display  
6 5-D THEATER indicator  
Displays the volume level. Volume level is maintained  
even when the power is off. ---dB indicates the  
minimum level, and 0dB indicates the maximum  
level.  
Lights when 5-D THEATER is selected.  
7 MIDNIGHT indicator  
Lights when the MIDNIGHT mode is on.  
• Depending on the level settings for individual  
channels, the MAX level can range between –10dB  
and 0dB.  
24  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
Remote Control  
7 Number buttons  
These pages describe the buttons on the remote control  
used to operate the receiver.  
These buttons can perform a variety of different  
functions depending on the remote operation mode.  
0
• [RECEIVER operations (press RECEIVER first)]  
: Press repeatedly to select the standard Dolby/  
DTS mode and the ADVANCED THEATER modes.  
(Refer to page 30, 32)  
DSP MODE : Press repeatedly to select a DSP sound  
mode (refer to page 31).  
RECEIVER  
TV  
1
2
-
FQ  
+
MIDNIGHT : Press to hear surround sound effectively  
at low volumes (refer to page 35).  
CH.SELECT : Use to select a speaker when adjusting  
speaker levels.  
3
ENTER  
–
FQ  
VOL  
VOL  
TEST TONE : Press to switch the test tone on or off  
when listening to a surround mode (refer to page 21).  
ATT : Press to attenuate (lower) the level of the input  
signals and prevent distortion (refer to “Display”, 5,  
Overload indicator on page 24).  
SIG.SELECT : When the same component uses both  
analog and digital connections, use to select input  
signals as digital or analog.  
CH.LEVEL (–/+) : Use to adjust individual speaker levels.  
EFFECT (+/–) : Use to adjust the DSP mode effect level.  
• [TUNER operations (press TUNER first)]  
4
5
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
6
VCR 2  
MD/TAPE  
MIDNIGHT  
4
=
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
7
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
8
9
~
!
Number buttons (0~9) : During preset tuning, use to  
input the number of the preset station. Use to input  
the station frequency during direct tuning.  
COMMANDER  
SET UP  
MODE CHECK  
Î
CLASS (+10) : Press repeatedly to switch the preset  
station classes during preset tuning.  
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
@
MENU : Press to activate direct tuning.  
8 FUNCTION button  
Press repeatedly to select a source.  
1 RECEIVER button  
Press to switch the receiver on or to put in standby.  
9 MODE CHECK button  
Press to confirm the current remote operation mode  
and to switch operation modes without changing the  
source (refer to page 51).  
2 MUTING button  
Press to mute the volume. “MUTING” appears in the  
display. Press again to cancel.  
0 Power button  
3 %˜fi˜@˜#˜ENTER buttons  
Press to turn on or put in standby all connected  
components other than this unit.  
Specific use of these buttons is described in  
conjunction with the operations they are used in.  
- TV/TV FUNC button  
ENTER : Press to switch the band (FM/AM) when  
using the tuner.  
Press TV to turn the TV’s power on or put in standby.  
Press TV FUNC to select the TV for remote control  
operation.  
4 VOL (+/–) buttons  
Press to adjust the volume. When VOL (+/–) buttons  
are pressed while muting, muting is canceled.  
= RECEIVER button  
Press to select the receiver for remote control  
operation.  
5 CHANNEL (+/–) button  
~ FL DIMMER button  
Use to select preset stations when operating the  
tuner. When the remote is used to control other  
components, this button may be used to change  
channels, tracks, or chapters.  
Press to adjust the brightness of the fluorescent  
display. Four levels of brightness ranging from very  
dim to very bright can be selected.  
! COMMANDER SET UP button  
Use to customize the remote control functions.  
(Refer to “Setting Up the Remote Control” starting on  
page 22.)  
6 MULTI CONTROL buttons  
Use these buttons to select the remote operation  
mode.  
For example, pressing TUNER sets the remote to  
operate the tuner functions.  
@ DIRECT button  
Use to playback original source audio. When DIRECT  
is ON, Dolby, DSP, LOUDNESS, DIGITAL NR and  
MIDNIGHT mode are automatically turned OFF.  
25  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
Front Panel  
7
8
!
1
2
6
~
@ #  
% ^  
&
3
9
-
=
$
4 5  
0
AUDIO/VIDEO MULTI-CHANNEL RECEIVER  
STANDBY  
MASTER  
VOLUME  
MPX  
CLASS MEMORY MODE  
DSP  
/ DTS  
Cinema  
Re - EQ  
MODE  
STANDBY/ON  
TUNING  
SELECT  
SIGNAL  
SELECT  
DIGITAL  
NR  
STATION  
MIDNIGHT  
FREQUENCY  
DOWN  
UP  
BASS  
TREBLE  
VIDEO INPUT  
TAPE 2  
MONITOR  
SPEAKERS  
VCR 1  
LOUDNESS  
DIRECT  
–
–
+
+
L
R
AUDIO  
VIDEO  
S-VIDEO  
PHONES  
R
TM  
FM/AM  
VCR 2  
DVD/LD  
DVD 5.1CH  
TV/SAT  
CD  
MD/TAPE 1  
VIDEO  
)
_
*
(
+
9 BASS (+/–) button  
1
STANDBY/ON button  
Press to adjust low frequencies in the range of 6.  
Press to switch the receiver on or put in standby.  
0 Display (Refer to page 24)  
2 STANDBY indicator  
Lights when the receiver is in standby mode. (Please  
note that this receiver consumes a small amount of  
power (2.5 W) during the standby mode.)  
- TREBLE (+/–) button  
Used to adjust high frequencies in the range of 6.  
3 CLASS button  
= DIRECT button  
Press repeatedly to switch the preset station classes.  
(Refer to “Memorizing Frequency Tuned Stations” on  
page 38 and “Recalling the Memorizing Stations” on  
page 39)  
Switches direct playback on or off. Use to bypass the  
receiver’s tone control circuitry or level control for  
higher fidelity to the program source. When DIRECT  
is ON, Dolby, DSP, LOUDNESS, DIGITAL NR and  
MIDNIGHT mode are automatically turned OFF.  
4 MEMORY button  
Press to memorize a preset station.  
(Refer to “Memorizing Frequency Tuned Stations” on  
page 38)  
~ Remote sensor  
Point the remote control toward the remote sensor to  
operate the receiver.  
5 MPX MODE button  
!
/DTS button  
Press repeatedly to select the standard Dolby/DTS  
mode and the ADVANCED THEATER modes. (Refer to  
page 30, 32)  
Press to switch between auto stereo and monaural  
(“MONO”) reception of FM broadcasts. When the  
broadcast signal is weak, selecting “MONO” will  
improve the sound quality.  
@ SIGNAL SELECT button  
6 TUNING SELECT button  
Use to select input signals for the digital components.  
Press to switch between STATION and FREQUENCY.  
First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR 1  
((, Function buttons) to select the component, then  
press SIGNAL SELECT repeatedly to select one of the  
following:  
7 SPEAKERS button  
Press repeatedly to switch between A and B speaker  
systems as follows.  
ANALOG : Selects the analog (R and L) audio signals.  
3
3
3
3
A
B
A+B  
OFF  
DIGITAL : Selects the digital audio signals. This  
receiver automatically detects and displays the  
format of the signal being input. AC-3 lights when  
Dolby Digital signals are input, and DTS lights when  
DTS signals are input. (AC-3 and DTS decoding is  
switched automatically.)  
8 LOUDNESS button  
Switches the loudness on or off. Use to raise the level  
of the bass and treble so they can be more easily  
heard when listening at low volumes.  
26  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts and Basic Operations  
• SIGNAL SELECT is fixed in the “ANALOG” position  
for components not assigned to one of the four  
digital input jacks.  
• Because the audio from a karaoke microphone and  
LD recorded with analog audio only is not output  
from the digital output, set SIGNAL SELECT to  
“ANALOG”.  
• This receiver can only play back Dolby Digital, PCM  
(32kHz, 44kHz, and 48kHz), and DTS digital signal  
formats. With digital signal formats other than  
these, set SIGNAL SELECT to “ANALOG”.  
# DSP MODE button  
Press repeatedly to select a DSP sound mode (HALL 1,  
HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2).  
Use these modes to produce surround sound from  
standard (two channel) stereo sources.  
$ MIDNIGHT button  
Press to hear effective surround sound at low volume  
levels. The effect is automatically adjusted according  
to the volume level.  
% Cinema Re-EQ button  
Switches Cinema Re-EQ on or off. Use to high  
frequency characteristics are reduced at the front  
channels (Front Left, Center, Front Right). (refer to  
page 33.)  
^ DIGITAL NR button  
Switches DIGITAL NR on or off. Use to reduce noise  
in digital audio sources (refer to page 34.)  
& MASTER VOLUME  
After turning on the desired component, rotate to  
adjust the volume.  
* PHONES jack  
Connect headphones for private listening (the  
speakers turn off automatically).  
( STATION/FREQUENCY (+/–) button  
STATION: Press to select the preset channel.  
FREQUENCY: Press to select the frequency.  
) Function buttons  
Selects the function. Each press switches the DVD/LD  
input between DVD/LD and DVD 5.1 channel.  
_ TAPE 2 MONITOR button  
Switches the TAPE 2 monitor on or off (refer to page 42).  
+ VIDEO INPUT jacks  
Connect a video camera, video game system, etc. to  
the VIDEO INPUT jacks (refer to page 10).  
27  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
This receiver incorporates two surround modes for enjoyment of a variety of program sources.  
Surround modes  
(Dolby) mode  
Use this mode when playing Dolby Digital or Dolby Pro Logic software. Decoding switches automatically according to  
the input signal, so all you have to do is enjoy!  
DOLBY  
D I G I T A L  
You can identify Dolby Digital software by the  
or  
marks. Most Dolby Pro Logic software is marked  
AC-3  
D
I
G
I
T
A
L
DOLBY SURROUND  
, but unmarked software may also incorporate Dolby Pro Logic.  
For more information about Dolby formats, refer to page 52.  
ADVANCED THEATER modes  
MUSICAL  
Simulates the acoustic environment of a large concert hall and is suitable for music or musical sources marked  
R
DOLBY  
D I G I T A L  
(
) or  
.
AC-3  
D
I
G
I
T
A
L
DRAMA  
Simulates the relaxed environment of a classic medium size movie theater, and is suitable for watching dramas on  
R
DOLBY  
D I G I T A L  
sources marked  
(
) or  
.
AC-3  
D
I
G
I
T
A
L
ACTION  
Simulates the acoustic environment of a modern large movie theater. You can enjoy the power and dynamics of  
R
DOLBY  
D I G I T A L  
motion picture audio which is suitable for action movies on sources marked  
(
) or  
.
AC-3  
D
I
G
I
T
A
L
5-D THEATER  
Simulates the clear and dynamic five channel sound of Dolby Digital audio on Dolby Pro Logic software marked  
DOLBY SURROUND  
. Also, when used with DTS or Dolby Digital sources, you can experience a sense of travelling with the  
soundtrack.  
DSP modes  
The DSP (Digital Signal Processing) modes allow you to transform your living room into a variety of different sonic  
environments when playing standard (two-channel) stereo sources, Dolby Pro Logic sources, and Dolby Digital sources.  
HALL 1  
Simulates the acoustic environment of a large concert hall of wooden construction. Complex delay of reflected  
sounds coupled with reverberation effects create a dynamic and beautiful sound characteristic of an orchestra  
performing in a concert hall, making it suitable for classical music  
HALL 2  
Simulates the acoustic environment of a concert hall with stone walls. The rich reverberations and natural fullness  
of the sound create the auditory impression of being in a concert hall, making it suitable for classical music.  
JAZZ  
Simulates the acoustic environment of a jazz club. Less delay on the reflected sounds emphasizes the sensation of  
hearing a live band.  
DANCE  
Simulates the acoustic environment and strong bass sound of a nightclub with a square dance floor. A short delay  
on the reflected sounds emulates the raw power of the dance music.  
THEATER 1  
Adjusts the delay of the reflected sound to simulate the acoustic environment of a medium sized movie theater.  
THEATER 2  
Simulates the acoustic environment of a theater while maintaining proper localization of each channel.  
28  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Switching ANALOG/DIGITAL Signal Input  
The input of the component set in the digital input setting (Refer to page 20, 21) can be switched to an analog or digital  
input signal by pressing the SIGNAL SELECT button.  
RECEIVER  
TV  
1 Press SIG. SELECT on the remote control or SIGNAL  
SELECT on the front panel to select the input signal  
corresponding to the source component.  
FQ  
+
ENTER  
Each press switches between ANALOG and DIGITAL signal selection.  
–
FQ  
SIGNAL  
SELECT  
SP  
A
SIGNAL  
SELECT  
ANALOG  
VOL  
VOL  
ANALOG  
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
SIGNAL  
SELECT  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
SP  
A
SIGNAL  
SELECT  
DSP MODE  
DIGITAL  
DIGITAL  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
SIG.SELECT  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
While SIGNAL SELECT is set to DIGITAL, AC-3 lights when a Dolby  
Digital signal is input, and DTS lights when a DTS signal is input  
2
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
SIGNAL  
SELECT  
SP  
A
SIGNAL  
SELECT  
DIGITAL  
AC-3  
When a Dolby Digital signal is input.  
When a DTS signal is input.  
DIGITAL  
AC-3  
SIGNAL  
SELECT  
SP  
A
SIGNAL  
SELECT  
DIGITAL  
DTS  
DIGITAL  
DTS  
SIGNAL SELECT  
memo  
• SIGNAL SELECT is fixed in the “ANALOG” position for components not  
assigned to one of the four digital input jacks.  
• Because the audio from a karaoke microphone and LD recorded with  
analog audio only is not output from the digital output, set SIGNAL  
SELECT to “ANALOG”.  
• This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, and  
48kHz), DTS digital signal formats. With digital signal formats other than  
these, set SIGNAL SELECT to “ANALOG”.  
• When an LD or CD player compatible with DTS is played back with  
SIGNAL SELECT set in “ANALOG”, digital noise is output caused by  
playing back the DTS directly (no decoding). To prevent noise, you need to  
make digital connections (Refer to pages 20, 21) and set SIGNAL SELECT  
to “DIGITAL”.  
• Some DVD players don’t output DTS signals. For more details, refer to the  
instruction manual supplied with your DVD player.  
29  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Playing Sources with Dolby Digital or DTS Sound  
RECEIVER  
TV  
1 Follow steps 1 to 3 of the playback procedure. (Refer to  
“Playback” on page 40.)  
FQ  
+
ENTER  
–
1
2
Turn on the power of the playback component.  
Press RECEIVER to turn on the receiver.  
FQ  
VOL  
VOL  
CHANNEL  
5
3 Press FUNCTION to select the source component you want to play.  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
2 Press SIG.SELECT on the remote control or SIGNAL  
SELECT on the front panel to select DIGITAL.  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
(Refer to “Switching ANALOG/DIGITAL signal input” on the previous  
page.)  
3
2
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
3 Press  
to switch the Dolby/DTS mode on.  
Each press changes the Dolby/DTS mode.  
COMMANDER  
SET UP  
MODE CHECK  
Î
(Refer to “Switching the Dolby/DTS mode” on page 32.)  
4 Start playback of the component you selected in step 1.  
5 Press VOL (+/–) to adjust the volume level.  
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
3
memo  
• When an LD or CD player compatible with DTS is played back with  
SIGNAL SELECT set in “ANALOG”, digital noise is output caused by  
playing back the DTS directly (no decoding). To prevent noise, you need to  
make digital connections (Refer to pages 20, 21) and set SIGNAL SELECT  
to “DIGITAL”.  
2 5  
memo  
When playing LD recorded in Dolby Digital  
When connecting a DVD/LD player or LD player using the AC-3 RF output, a commercially available RF demodulator  
(RFD-1) is required. The RF demodulator changes the RF signal to a digital signal which is then processed by the  
receiver at the digital input jacks. For more details, refer to the instruction manual supplied with the RFD-1.  
Refer to pages 52, 53 for explanations of Dolby Digital, Dolby Pro Logic, and DTS.  
30  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Selecting a Sound Mode  
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting Up for  
Surround Sound” (starting on page 16) before using the sound modes. This is particularly important when using the  
(Dolby)/DTS sound mode. When using the sound modes, SPEAKERS A are used. If SPEAKERS B are selected and a  
sound mode is turned on, selection automatically switches to SPEAKERS A only.  
Surrround operation  
RECEIVER  
TV  
1 Press RECEIVER.  
This sets the remote to select the sound mode.  
(You can skip this step when using the controls on the receiver.)  
FQ  
+
ENTER  
–
FQ  
2 Select the sound mode.  
VOL  
VOL  
• For  
(Dolby)/DTS mode \ Press  
CHANNEL  
• For DSP modes \ Press DSP MODE repeatedly  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
Each press changes the DSP mode as follows:  
VCR 1  
TUNER  
1
=HALL 1 = HALL 2 = JAZZ = DANCE  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
2
SFC OFF+ THEATER 2 + THEATER 1 +  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
ATT  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
memo  
EFFECT +/–  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
• The amount of effect of each DSP mode can be adjusted in the range of 10  
to 90 (the default setting value is 70) by pressing EFFECT +/–.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
2
31  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Switching the Dolby/DTS mode (ADVANCED THEATER mode)  
Switch the Dolby/DTS mode by pressing the  
button. When Dolby/DTS mode is ON, Dolby Pro Logic, Dolby Digital,  
and DTS signal processing is performed automatically corresponding to the input signal.  
RECEIVER  
TV  
Switch the Dolby/DTS mode on and off by pressing  
the remote control or /DTS on the front panel.  
on  
Each press changes the display as follows.  
FQ  
ENTER  
3
3
3
STANDARD  
MUSICAL  
DRAMA  
ACTION  
–
FQ  
3
3
5-D THEATER  
OFF  
VOL  
VOL  
CHANNEL  
MULTI CONTROL  
Refer to page 28 for more details about each surround effect.  
memo  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
VCR 2  
TUNER  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
CH.SELECT TEST TONE  
ATT  
SIG.SELECT  
• The effects of Dolby/DTS mode can be adjusted in the range of 10 to 90  
by pressing EFFECT +/–. (The default setting is 70) . Also, the effect level  
can be set in each Dolby/DTS mode by pressing the EFFECT(+/–) button.  
STANDARD and 5-D THEATER modes cannot be changed.  
• If the ADVANCED THEATER mode (MUSICAL, DRAMA, ACTION) is ON  
when the digital input is selected, the overload indicator may flicker. If  
this bothers you, set the ADVANCED THEATER mode to STANDARD.  
6
0
5
7
8
CN.LEVEL  
EFFECT  
9
+10  
CLASS  
MEMU  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
/DTS  
32  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
DVD 5.1ch input playback  
Connect a component with 5.1 channel output to enjoy the surround sound created by 5.1 channel playback.  
Press DVD/LD on the unit.  
DVD/LD  
Each press switches the input: DVD/LD j DVD/LD 5.1ch  
SP  
A
SIGNAL  
SELECT  
ANALOG  
SP  
A
SIGNAL  
SELECT  
ANALOG  
DIGITAL  
AC-3  
DIGITAL  
j
L
LS  
C
R
RS  
dB  
LEF  
dB  
memo  
• When DVD 5.1ch input is selected, Dolby mode, DSP mode,  
SIGNAL SELECT, input ATT, DIRECT, TONE, MIDNIGHT mode,  
DIGITAL NR and speakers B cannot be operated.  
• When DVD 5.1ch input is selected, only the volume level and  
channel levels can be set.  
Using Cinema Re-EQ  
THX Cinema Re-EQ* is a process developed by Lucasfilm, Ltd. to make Dolby Surround soundtracks originally intended  
for playback at movie theaters sound more natural when played through a typical home theater set up. Due to  
differences in room acoustics and the kind of speakers typically used in movie theaters compared to those found in the  
home, some movie soundtracks can sound overly 'bright' when played on home systems. Cinema Re-EQ compensates  
for these differences for a more accurate presentation.  
1
2
Select an input source.  
Like the other surround effects, Cinema Re-EQ is not set universally,  
but for each input source separately.  
Cinema Re-EQ  
Press Cinema Re-EQ to switch the effect on/off.  
SP  
A
SIGNAL  
SELECT  
ANALOG  
DIGITAL  
AC-3  
SP  
A
SIGNAL  
SELECT  
ANALOG  
DIGITAL  
DIGITAL  
AC-3  
DIGITAL  
j
L
LS  
C
R
L
C
R
RS  
LS  
RS  
LEF  
dB  
LEF  
dB  
Since the Cinema Re-EQ effect is designed to work with Dolby  
surround software, ADVANCED THEATER (STANDARD) mode is  
switched on automatically when Cinema Re-EQ is switched on.  
Likewise, if any other ADVANCED THEATER mode except STANDARD  
is switched off while Cinema Re-EQ is on, Cinema Re-EQ will also be  
switched off.  
DSP effects cannot be used together with Cinema Re-EQ. Switching on  
Cinema Re-EQ will automatically switch off any DSP effect currently set.  
3
Playback the source material.  
Cinema Re-EQ can safely be switched during playback.  
* THX and Cinema Re-EQ are trademarks of Lucasfilm, Ltd.  
33  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Reducing noise during playback (DIGITAL NR function)  
When DIGITAL NR is on, extraneous noise during playback can be reduced.  
DIGITAL NR  
Press DIGITAL NR on the front panel.  
Each press switches DIGITAL NR on or off.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
DNR  
DIGITAL  
AC-3  
dB  
memo  
• In cases described below, DIGITAL NR cannot be used.  
1 Dolby/DTS mode is ON.  
2 DSP mode is ON.  
3 DVD 5.1ch input is selected.  
4 Dolby Digital or DTS signals are being input.  
* When DIGITAL NR is on and Dolby Digital or DTS signals are input,  
DIGITAL NR is automatically switched off.  
• In cases described below, noises may not be reduced even if DIGITAL NR  
is on.  
· Sudden noise  
· Extremely loud noise  
· Signals that do not contain many high frequencies  
• For each source, DIGITAL NR is effective at and above levels shown below.  
· Cassette tape............................20 dB  
· Video tape ................................15 dB  
· AM tuner ........................ 10 to 15 dB  
· FM tuner ......................... 15 to 16 dB  
* Depending on the condition of the source, there may not be a noticeable  
improvement in the quality of the sound.  
34  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Modes  
Listening in MIDNIGHT Listening Mode  
When the volume is low, surround effects tend to become less than satisfactory. Turn the MIDNIGHT listening mode on  
to enjoy the effects of quality surround sound even at low volumes. This mode allows you to hear effective surround  
sound of movies at low volume levels.  
Press MIDNIGHT.  
Each press switches MIDNIGHT listening mode on or off.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
MIDNIGHT  
RECEIVER  
TV  
DIGITAL  
AC-3  
DIGITAL  
L
C
R
LS  
RS  
LEF  
dB  
FQ  
+
ENTER  
memo  
–
FQ  
The effect automatically adjusts according to the volume level.  
VOL  
VOL  
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
MIDNIGHT  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
MIDNIGHT  
35  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Automatic and Manual Tuning  
The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and manual  
(step) tuning functions. If you already know the exact frequency of the station you want, see “Direct Tuning” on the  
following page.  
RECEIVER  
TV  
1 Press FUNCTION repeatedly on the remote or FM/AM on  
the front panel to select the tuner. Press TUNER to set  
the remote to the tuner operation mode.  
FQ  
+
ENTER  
3
2
The station you were previously tuned to is received automatically.  
–
FQ  
VOL  
VOL  
A
SP  
SIGNAL  
SELECT  
ANALOG  
4
CHANNEL  
dB  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
1
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
2 Press ENTER on the remote or FM/AM on the front panel  
to select the band (FM or AM).  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
Each press switches the band: FM j AM  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
SP  
A
SP  
A
SIGNAL  
SELECT  
ANALOG  
SIGNAL  
SELECT  
ANALOG  
FUNCTION  
DIRECT  
FL DIMMER  
j
COMMANDER  
SET UP  
MODE CHECK  
dB  
dB  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
3 Tune in the station.  
For Automatic Tuning  
Press and hold FQ +/– (%˜fi) for about one second, then release.  
The tuner starts searching the selected band and stops automatically at  
the first station it locates. Repeat to locate other stations.  
For Manual Tuning  
• To change frequencies one step at a time, press FQ +/– (%˜fi)  
repeatedly.  
MPX MODE  
3
• To change frequencies quickly, hold down FQ +/– (%˜fi) and release  
when you reach the frequency you want.  
When using the front panel  
Press FREQUENCY (+/–) until the frequency you want appears in the  
display.  
4 Adjust the volume.  
MPX Mode  
2
4
If the TUNED or STEREO indicators do not light when tuning an FM station,  
because the station is too far away or the broadcast signal is weak, press  
MPX MODE on the front panel to switch to monaural (MONO) reception.  
This should improve reception enough for you to enjoy the broadcast.  
36  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Direct Tuning  
The following steps show you how to tune directly to a specific frequency using the remote control.  
RECEIVER  
TV  
1 Press FUNCTION repeatedly on the remote or FM/AM on  
the front panel to select the tuner. Press TUNER to set  
the remote to the tuner operation mode.  
FQ  
+
The station you were previously tuned to is received automatically.  
ENTER  
2
–
FQ  
VOL  
VOL  
2 Press ENTER to select the band (FM or AM).  
CHANNEL  
Each press switches the band: FM j AM  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
1
3 Press MENU to activate the direct tuning mode.  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
The cursor blinks in the display on the front panel.  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
4
3
6
5
7
8
A
SP  
SIGNAL  
SELECT  
ANALOG  
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
TV/VCR  
dB  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
4 Use the number buttons to enter the frequency of the  
station you want.  
Example:  
To tune station 106.00 (FM), press: 1 = ` = 6 = ` = `  
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
To cancel before inputting the frequency  
Press MENU, and enter the frequency again.  
37  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Memorizing Frequently Tuned Stations  
The following steps show you how to memorize up to 30 radio stations in 3 classes (each holding 10 channels). When  
memorizing FM frequencies, the receiver also memorizes the MPX mode (STEREO or MONO).  
Using the front panel  
3 2  
1 Tune in the station you want to have memorized.  
See “Automatic and Manual Tuning” or “Direct Tuning” on pages 36, 37.  
2 Press MEMORY to activate the memory function.  
“A--” blinks in the display.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
4
dB  
3 Press CLASS repeatedly to select a class.  
Each press switches the display:  
= CLASS A = CLASS B = CLASS C  
4 Press STATION (+/–) to select a channel (1~10) within the  
respective class.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
The station is memorized automatically after 5 seconds.  
Repeat steps 1 through 4 to memorize up to 30 stations.  
38  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Recalling the Memorized Stations  
Using the remote control  
1 Press FUNCTION repeatedly on the remote or FM/AM on  
the front panel to select the tuner. Press TUNER to set  
the remote to the tuner operation mode.  
RECEIVER  
TV  
The station you were previously tuned to is received automatically.  
FQ  
+
ENTER  
A
SP  
SIGNAL  
SELECT  
ANALOG  
–
FQ  
dB  
VOL  
VOL  
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
2 Press CLASS repeatedly to select a class.  
VCR 1  
TUNER  
Each press switches the display:  
1
VCR 2  
MD/TAPE  
MIDNIGHT  
4
= CLASS A = CLASS B = CLASS C  
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
3
2
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
TV/VCR  
3 Use the number buttons to select the channel you want.  
To select channel 7, press 7.  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
To select channel 10, press `.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
For example : If 99.50 MHz (FM) was memorized in class B at channel 7.  
A
SP  
SIGNAL  
SELECT  
ANALOG  
dB  
To skip through each channel in order  
Press CHANNEL +/– repeatedly.  
Using the front panel  
2
1 Press FM/AM.  
2 Press CLASS repeatedly to select a class.  
3 Press STATION +/– to select the channel you want.  
3
1
39  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Playback  
RECEIVER  
TV  
1 Turn on the power of the playback component.  
2
6
FQ  
+
2 Press RECEIVER to turn on the receiver.  
ENTER  
STANDBY  
indicator  
–
Be sure that the standby indicator turns off on  
FQ  
the front panel.  
VOL  
VOL  
CHANNEL  
MULTI CONTROL  
CD  
3 Press FUNCTION to select the source you want to  
playback.  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
The source you want to playback is displayed in the following order:  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
4
VIDEO  
DVD/LD  
TUNER  
CD  
MD/TAPE 1  
TV/SAT  
VCR 1  
VCR 2  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
3
COMMANDER  
SET UP  
MODE CHECK  
4 Press SIG. SELECT on the remote control or SIGNAL  
SELECT on the front panel to select the input signal  
corresponding to the source component.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
(Refer to “Switching ANALOG/DIGITAL signal input” on page 29.)  
5 Start playback of the component you selected in step 1.  
6 Press VOL (+/–) to adjust the volume level in the range of  
--- dB (MIN) to 0 dB (MAX).  
4 6  
memo  
• Depending on the channel level setting, the MAX volume level  
may differ 0 to -10 dB from the level displayed.  
• When this receiver is not going to be used for a long time, it is  
recommended that you turn off the main power.  
2
3
40  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Adjusting bass and treble (tone control)  
Use BASS (+/–) or TREBLE (+/–) to adjust the low and high frequencies.  
Press BASS (+/–) to adjust the low frequencies.  
TREBLE +/–  
SP  
A
SIGNAL  
SELECT  
ANALOG  
dB  
Press TREBLE (+/–) to adjust the high frequencies.  
BASS +/–  
SP  
A
SIGNAL  
SELECT  
ANALOG  
dB  
memo  
• The tone control can be adjusted in a range of 6.  
• Pressing + and – simultaneously restores the setting to 0.  
• In cases described below, the tone control cannot be adjusted.  
1 Dolby/DTS mode is ON.  
2 DSP mode is ON.  
3 DVD 5.1ch input is selected.  
Adjusting the brightness of the display  
Use FL DIMMER to adjust the brightness of the fluorescent display.  
RECEIVER  
TV  
Press FL DIMMER.  
Four levels of brightness ranging from very dim to very bright can be  
selected. Each press changes the brightness of the display. When rotating  
through the options, the default brightness can also be selected.  
FQ  
+
ENTER  
–
FQ  
VOL  
VOL  
memo  
CHANNEL  
MULTI CONTROL  
In standby, pressing STANDBY/ON while holding down the  
returns the display to the default brightness.  
/DTS button  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
41  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Recording from Audio Components  
The following operations show you how to record audio to the cassette, DAT, or MD deck connected to the MD/TAPE 1  
or TAPE 2 MONITOR jacks.  
The receiver’s volume, balance, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect  
on the recorded signal.  
memo  
1 Select the component you want to record.  
RECEIVER  
TV  
Press SIG. SELECT on the remote or SIGNAL SELECT on the front  
panel to select “ANALOG” when making analog recordings, or  
“DIGITAL” when making digital recordings. (Refer to “Switching  
ANALOG/DIGITAL signal input” on page 29.)  
FQ  
+
ENTER  
–
FQ  
2 Prepare the program source.  
VOL  
VOL  
(Tune in the radio station or load the CD, etc.)  
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
3 Insert a blank tape into the cassette deck (MD/TAPE 1 or  
TAPE 2 MONITOR) and adjust the recording level (if necessary).  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
SIG. SELECT  
4 Start recording on the cassette deck, then start playback  
from the source component.  
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
1
MODE CHECK  
Record monitor (TAPE 2 MONITOR)  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
If you connect a cassette deck (etc.) with a record monitor function to the  
TAPE 2 MONITOR jacks, you can listen to the sound of the recording as it is  
being recorded.  
Press TAPE 2 MONITOR to switch between the sound of the  
recording (TAPE 2 indicator on) and the sound of the source  
component (TAPE 2 indicator off).  
SIGNAL SELECT  
• This receiver outputs the input signal directly to the recording  
memo  
device. As there is no conversion of the audio signal,  
recordings cannot be made from analog to digital, and similarly  
from digital to analog.  
• Recordings cannot be made from TAPE 2 MONITOR to  
MD/TAPE 1.  
TAPE 2  
MONITOR  
1
42  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Recording from Video Components  
The following operations show you how to record audio and video to the video tape recorder connected to the VCR 1 or  
VCR 2 jacks.  
The receiver’s volume, balance, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect  
on the recorded signal.  
memo  
RECEIVER  
TV  
1 Select the component you want to record.  
Be sure to press SIG. SELECT on the remote or SIGNAL SELECT on the  
front panel to choose “ANALOG”. (Refer to “Switching ANALOG/  
DIGITAL signal input” on page 29.)  
FQ  
+
ENTER  
–
FQ  
2 Prepare the program source.  
VOL  
VOL  
(Load the DVD or LD, etc.)  
CHANNEL  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
3 Insert a blank tape into the video tape recorder (VCR 1).  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
4 Start recording on the video tape recorder, then start  
playback from the source component.  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
SIG. SELECT  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
1
MODE CHECK  
Î
• Recording cannot be made from analog to digital, and similarly  
from digital to analog.  
memo  
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
• When recording a DVD, the recorded image may flicker or be  
difficult to view because of the copy protection signal  
programmed on the DVD.  
SIGNAL SELECT  
1
43  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Remote Controlling Other Components  
DVD or LD player operations  
memo  
Before performing these operations, press the DVD/LD (MULTI CONTROL) button to switch the remote to the  
DVD/LD operation mode.  
RECEIVER  
TV  
5 Number buttons  
Use to select chapters (tracks).  
1
2
FQ  
+
6 1˜¡  
ENTER  
1 : Hold down for fast reverse playback.  
¡ : Hold down for fast forward playback.  
6
7
3
4
–
FQ  
7 4˜¢  
VOL  
VOL  
CHANNEL  
4 : Press to return to the beginning of the current  
chapter (track). Press repeatedly to return to the  
beginning of previous chapters (tracks).  
¢ : Press to advance to the beginning of the next  
chapter (track). Press repeatedly to advance to the  
beginning of following chapters (tracks).  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
8 MENU  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
5
6
5
7
8
LD : Switches between sides A and B of the disc.  
DVD : Switches the menu screen on and off.  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
8
9
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
9 +10  
COMMANDER  
SET UP  
MODE CHECK  
Use when selecting chapter (track) numbers higher  
than 10.  
Î
To select chapter (track) 34, press :  
+10 = +10 = +10 = 4  
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
To select chapter (track) 20, press :  
+10 = +10 = 0  
memo  
1
Press DVD/LD (MULTI CONTROL) two times in  
succession to make the buttons blink. While the buttons  
are blinking, you can operate the player by pressing the  
following buttons.  
Press to switch the DVD or LD player on or off.  
2 8  
Press to pause playback. (With certain models, this  
button may freeze the frame.)  
2 %, 3 ENTER, 6 @ # , 8 MENU key  
9 title key  
3 3  
Press to start playback.  
Pressing the DVD/LD button again or not pressing any  
buttons for 30 seconds returns the remote control to its  
former condition.  
4 7  
Press to stop playback. (With certain models,  
pressing this button when the unit is stopped may  
open the disc tray.)  
*With some Pioneer DVD and DVD/LD players, cursor  
operation can be performed without pressing DVD/LD.  
44  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
TV operations  
memo  
Before performing these operations, press TV CONTROL or TV/SAT (MULTI CONTROL) to switch the remote  
to the TV operation mode.  
1
RECEIVER  
TV  
Press to switch the TV on or off.  
5
6
1
2
2 5  
FQ  
Raises the volume of the TV.  
+
ENTER  
3 ∞  
–
Lowers the volume of the TV.  
FQ  
3
VOL  
VOL  
4 Number buttons  
7
8
CHANNEL  
Use to select a specific TV channel.  
MULTI CONTROL  
5 TV  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
Press to switch the TV on or off. (This operation is  
possible regardless of the current remote operation  
mode, however, it can only be used with the  
component assigned to TV CONTROL.)  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
4
6
5
7
8
6 TV FUNC  
CN.LEVEL  
EFFECT  
Press to switch the TV’s input (not possible with all  
models). (This operation is possible regardless of the  
current remote operation mode.)  
9
0
+10  
CLASS  
MEMU  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
7 VOL (+/–)  
Î
Use to adjust the volume of the TV.  
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
8 CHANNEL (+/–)  
Use to select a TV channel.  
45  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
SAT (Satellite Tuner) operations  
• The following operations are available from the receiver’s remote control after you recall a Satellite tuner  
preset code (refer to “Setting up the Remote Control” on page 22).  
memo  
• Before performing these operations, press the TV/SAT (MULTI CONTROL) button to switch the remote to  
the TV/SAT operation mode.  
1
RECEIVER  
TV  
Press to switch the satellite tuner on or off.  
1
2
2 5˜∞˜2˜3  
FQ  
Use as cursor buttons to obtain information about  
programs.  
+
ENTER  
3 Number buttons  
–
FQ  
Use to select satellite channels.  
VOL  
VOL  
CHANNEL  
4 ENTER  
5
Press to select the position selected using the cursor  
MULTI CONTROL  
buttons (5˜∞˜2˜3).  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
VCR 1  
TUNER  
5 4˜¢ (GUIDE)  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
Use to turn the program information screen on or off.  
DSP MODE  
1
2
3
6 DISC (MENU)  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
3
6
5
7
8
Use to turn the main menu on or off.  
CN.LEVEL  
EFFECT  
9
0
+10  
CLASS  
MEMU  
6
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
46  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
CD player operations  
memo  
Before performing these operations, press the CD (MULTI CONTROL) button to switch the remote to the CD  
operation mode.  
1
RECEIVER  
TV  
Press to switch the CD player on or off.  
1
2
2 8  
FQ  
Press to pause playback.  
+
ENTER  
6
7
3 3  
3
4
–
Press to start playback.  
FQ  
VOL  
VOL  
4 7  
CHANNEL  
Press to stop playback.  
MULTI CONTROL  
5 Number buttons  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
Use to select tracks.  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
6 1˜¡  
DSP MODE  
1 : Hold down for fast reverse playback.  
¡ : Hold down for fast forward playback.  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
5
6
5
7
8
CN.LEVEL  
EFFECT  
7 4˜¢  
9
0
+10  
MEMU  
8
9
CLASS  
TV/VCR  
4 : Press to return to the beginning of the current  
track. Press repeatedly to return to the beginning of  
previous tracks.  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
¢ : Press to advance to the beginning of the next  
track. Press repeatedly to advance to the beginning of  
following tracks.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
8 MENU  
For multi-disc CD changers, use to select the disc  
numbers (not possible with all models).  
For example, to select disc 34, press :  
3 = 4 = MENU.  
9 +10  
Use when selecting track numbers higher than 10.  
For example, to select track 34, press :  
+10 = +10 = +10 = 4  
47  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
MD recorder operations  
Before performing these operations, press the MD/TAPE (MULTI CONTROL) button to switch the remote to  
the MD/TAPE operation mode.  
memo  
1
RECEIVER  
TV  
Press to switch the MD recorder on or off.  
1
2 8  
FQ  
Press to pause playback.  
2
+
ENTER  
6
7
3 3  
3
4
–
Press to start playback.  
FQ  
VOL  
VOL  
4 7  
CHANNEL  
Press to stop playback.  
MULTI CONTROL  
5 Number buttons  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
Use to select tracks.  
VCR 1  
TUNER  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
6 1˜¡  
DSP MODE  
1 : Hold down for fast reverse playback.  
¡ : Hold down for fast forward playback.  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
5
6
5
7
8
CN.LEVEL  
EFFECT  
7 4˜¢  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
4 : Press to return to the beginning of the current  
track. Press repeatedly to return to the beginning of  
previous tracks.  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
8
¢ : Press to advance to the beginning of the next  
track. Press repeatedly to advance to the beginning of  
following tracks.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
8 +10  
Use when selecting track numbers higher than 10 or  
100.  
For example (in case of MJ-D707 (PIONEER)),  
1) To select track 15, press :  
+10 = 1 = 5  
2) To select track 115, press :  
+10 = +10 = 1 = 1 = 5  
To start recording  
Press both 2 8 and 4 7 simultaneously.  
48  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Cassette deck operations  
memo Before performing these operations, press the MD/TAPE (MULTI CONTROL) button to switch the remote to  
the MD/TAPE operation mode.  
1
RECEIVER  
TV  
Press to switch the cassette deck on or off (not  
possible with all models).  
1
2
2 8  
FQ  
+
Press to pause playback or recording.  
ENTER  
5
3
4
3 3  
–
FQ  
Press to start playback.  
VOL  
VOL  
CHANNEL  
4 7  
Press to stop playback or recording.  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
5 1˜¡  
VCR 1  
TUNER  
1 : Press to rewind the tape. Hold down during  
playback for fast reverse playback (not possible with  
all models).  
¡ : Press to fast forward the tape. Hold down during  
playback for fast forward playback (not possible with  
all models).  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
6
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
6 Number buttons  
COMMANDER  
SET UP  
MODE CHECK  
Use to operate deck 1 of a double cassette deck (not  
possible with all cassette decks).  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
1 button (1)  
Press to rewind the tape. Hold down during playback  
for fast reverse playback (not possible with all  
models).  
2 button (7)  
Press to stop playback or recording.  
3 button (3)  
Press to start playback.  
4 button (¡)  
Press to fast forward the tape. Hold down during  
playback for fast forward playback.  
To start recording  
Press both 2 8 and 4 7 simultaneously.  
You cannot record on deck 1 of a double cassette deck.  
49  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
VCR operations  
memo  
Before performing these operations, press the VCR 1 or VCR 2 (MULTI CONTROL) button to switch the  
remote to the VCR operation mode.  
1
RECEIVER  
TV  
Press to switch the VCR 1 or VCR 2 (VCR only on VSX-  
D508S) on or off (not possible with all models).  
1
2
2 8  
FQ  
+
Press to pause playback or recording.  
ENTER  
6
7
3
4
3 3  
–
FQ  
Press to start playback.  
VOL  
VOL  
CHANNEL  
4 7  
Press to stop playback or recording.  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
5 Number buttons  
VCR 1  
TUNER  
Use to select a specific channel on the VCR's TV  
tuner.  
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
6 1˜¡  
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
5
6
5
7
8
1 : Press to rewind the tape. Hold down during  
playback for fast reverse playback (not possible with  
all models).  
¡ : Press to fast forward the tape. Hold down during  
playback for fast forward playback (not possible with  
all models).  
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
8
9
CLASS  
TV/VCR  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
7 CHANNEL (+/–)  
Use to change the channel of the VCR’s TV tuner.  
8 TV/VCR  
Use to switch the VCR’s antenna output between TV  
and VCR.  
9 +10 (ENTER)  
Use to select the channel specified with the number  
buttons (not all models require this step).  
To start recording  
Press both 2 8 and 4 7 simultaneously.  
50  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Operations  
Background Control of Other Components  
The following steps show you how to control one component while listening to another. This may be useful if you want  
to rewind a tape while listening to CD, etc.  
1 Select a component, then start playback.  
RECEIVER  
TV  
For example:  
Press FUNCTION to select the CD player, then press the CD button,and  
start playing a CD. (You should hear the sound of the CD playing back.)  
FQ  
+
ENTER  
–
2 Press MODE CHECK to display the current operation  
FQ  
mode.  
VOL  
VOL  
CHANNEL  
The corresponding MULTI CONTROL button lights up.  
For example:  
MULTI CONTROL  
CD  
DVD/LD  
TV/SAT  
TV CONTROL  
RECEIVER  
The CD button should light up to indicate that the remote is set to  
operate the CD player.  
VCR 1  
TUNER  
1
VCR 2  
MD/TAPE  
MIDNIGHT  
4
DSP MODE  
1
2
3
CH.SELECT  
TEST TONE  
ATT  
SIG.SELECT  
3 Press MODE CHECK repeatedly to select another  
operation mode.  
6
5
7
8
CN.LEVEL  
EFFECT  
9
0
+10  
MEMU  
CLASS  
TV/VCR  
Each time you press MODE CHECK, the next MULTI CONTROL button  
should light, enabling you to operate the selected device.  
For example:  
FUNCTION  
DIRECT  
FL DIMMER  
COMMANDER  
SET UP  
MODE CHECK  
2,3,5  
Press repeatedly to light the MD/TAPE button. The receiver’s function  
remains set to CD (and you should still hear the CD player), but the  
remote control is now set to operate the tape deck.  
Î
AUDIO/VIDEO PRE-PROGRAMMED  
REMOTE CONTROL UNIT  
4 Perform the desired operation(s).  
The remote control remains in the selected operation mode, so you  
may perform as many operations as necessary.  
For example :  
Press 1 to rewind the tape.  
5 Press MODE CHECK repeatedly to switch back to the  
original operation mode.  
You can also switch back to the original operation mode by pressing  
the corresponding MULTI CONTROL button.  
For example :  
Press MODE CHECK repeatedly to light the CD button, or press the CD  
button.  
51  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Dolby Digital  
Dolby Digital is a compression format which records the sound of 6 channels of the theater surround system (Dolby  
Digital) on the movie film digital track. Of the 6 channels, the sub woofer channel is intended for bass only, and because  
the frequency range is smaller than the main channel, it is expressed as 5.1 channel.  
Dolby Digital is the name of the Dolby surround multi-channel digital system that was developed after the Dolby  
Surround System and Dolby Pro Logic Surround System.  
5.1 channel digital  
surround track  
4 channel analog  
sound track (Matrix)  
AC-3  
encoding  
AC-3 for motion pictures  
The number of movies made using Dolby Digital since 1992 has exceeded 300 and continues to increase. For compact  
disc players and laser disc digital sounds, 16 bits are used to sample the original analog audio waveform and sampling  
is carried out 44,100 times every second. However because an enormous amount of recording signal data is required  
for the multi channel system with this method, AC-3 is used to compress the data.  
In reproducing audio signals, the smaller the bit number used, the lower the sound quality. With AC-3, drop in auditory  
sound quality is prevented by using masking technology and digital filtering technology based on the personal auditory  
characteristics.  
Laser disc format  
Laser discs are now available on the market in large numbers. This means that the recording of different format audio  
signals on the laser disc raises the important question of compatibility with existing laser discs. Dolby Digital records  
signals using one analog audio channel to maintain this compatibility with existing discs and players.  
As shown in the following figure, the digital audio sounds of Dolby Digital discs can be played back as currently done.  
Analog sounds are played back by using the other channel without the Dolby Digital signals for monaural audio signals.  
Dolby Digital  
sound  
(Monaural)  
Analog sound  
(Monaural)  
Video  
Digital  
sound  
Frequency  
2
4
6
8
10  
12  
14 MHz  
Comparison with Dolby Pro Logic Surround  
Dolby Digital is also known as the 5.1 channel system. It is equipped with 5 channels (front left, front right, center,  
surround left, surround right) in the frequency range from 20 Hz to 20 kHz and an independent sub woofer channel. The  
sub woofer channel is also called LFE (Low Frequency Effect).  
The LFE channel can be used as desired to enjoy strong bass sounds.  
The table on the next page shows the comparison with Dolby Pro Logic Surround effects.  
52  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
DTS  
DTS has been adopted as a sound recording format in the latest movie theaters since the release of “JURASSIC PARK”  
in 1993, and has a good reputation for high quality sound and dynamic surround effects.  
In this system, 6 channels of digital sound are recorded on CD-ROM, not on the film. It adopts a simultaneous playback  
format. With a low rate of compression of sound signals and a high rate of transmittance, higher sound quality format  
is produced. Also, unlike the process of recording digital sounds on film directly, the only components required are a  
CD-ROM player as might be used with a personal computer and a DTS processor, and therefore less investment is  
required than with other formats. For this reason, the format is being introduced in more and more movie theaters, and  
is being adopted in home movie software (DVD, LD) and music software (5.1 channel CD).  
More than 11,000 movie theaters around the world have adopted the DTS format, which is now the most popular digital  
format for movie theaters, especially in U.S.A, Europe, and Asia.  
Dolby Pro Logic  
Dolby Digital  
DTS  
Surround  
2 channels  
4 channels  
6 channels (Max.)  
6 channels (Max.)  
No. of recorded channels  
No. of playback channels  
5.1 channels (Max.)  
5.1 channels (Max.)  
Playback channel structure Front Left, Front Right,  
Center, Surround Left,  
Front Left, Front Right,  
Center, Surround Left,  
Front Left, Front Right,  
Center, Surround  
Surround Right, Sub Woofer  
Surround Right, Sub Woofer  
Digital discrete processing  
20,000 Hz  
Digital discrete processing  
Analog matrix processing  
7,000 Hz  
Sound processing  
Rear (Surround) high  
frequency playback limit  
20,000 Hz  
Other  
• 5.1 completely  
independent channels  
• 6 completely independent  
channels  
• High dynamic range  
• High dynamic range  
• Stable position, high phase • Stable position, high phase  
characteristics, and  
advanced surround effects  
reproduction  
characteristics, and  
advanced surround effects  
reproduction  
• High efficiency  
• Low compression rate  
(Compression rate of about  
one-tenth)  
(about one-fourth), high  
quality sound  
53  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Troubleshooting  
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with  
this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other  
components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks  
listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.  
Symptom  
Cause  
Remedy  
The power does not turn ON.  
• The power plug is disconnected.  
• Connect the power plug to the wall  
outlet.  
• The protection circuit may have  
been activated.  
• Disconnect the power plug from  
the outlet, and insert again.  
The unit does not respond when the  
buttons are pressed.  
• Static electricity caused by dry air.  
• Improper connections.  
• Sound is muted.  
• Disconnect the power plug from  
the outlet, and insert again.  
No sound is output when a function  
is selected.  
• Make sure the component is  
connected correctly (refer to pages  
9 to 14).  
• Press MUTING on the remote  
control.  
• The volume is turned down.  
• The TAPE 2 MONITOR is ON.  
• Speakers are turned OFF.  
• Adjust MASTER VOLUME.  
• Press the TAPE 2 MONITOR button.  
Press SPEAKERS or SPEAKERS (A/B)  
to select the speakers you connected.  
•
No image is output when a function  
is selected.  
• Improper connections.  
• Make sure the component is  
connected correctly (refer to pages  
10, 11).  
• The input source is not properly  
selected.  
• Press the correct function button.  
Considerable noise in radio  
broadcasts.  
• Incorrect frequency.  
• Tune in the correct frequency.  
• Connect the antenna (refer to page 8).  
• Route AC-3 RF and digital cables  
away from the antenna terminals  
and wires.  
• The antenna is not connected.  
• AC-3 RF and/or digital cables are  
near the antenna terminals and  
wires.  
FM broadcasts  
• The FM antenna is not fully  
• Fully extend the FM wire antenna,  
position for best reception, and  
secure to a wall.  
• Connect an outdoor FM antenna  
(refer to page 8).  
extended or is poorly positioned.  
• Weak radio signals.  
AM broadcasts  
• Adjust the direction and position  
for best reception.  
• Connect an additional internal or  
external AM antenna (refer to page 8).  
• Turn off the equipment causing the  
noise or move it away from the  
receiver.  
• Place the antenna farther away  
from the equipment causing the  
noise.  
• The AM antenna is poorly  
positioned.  
• Weak radio signals.  
• Interference cause by other  
equipment (fluorescent lamp,  
motor, etc.).  
54  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Remedy  
Symptom  
Cause  
Broadcast stations cannot be selected  
automatically.  
• Weak radio signals.  
• Connect an outdoor antenna (refer  
to page 8).  
No sound from surround or center  
speakers.  
• Speaker settings are incorrect.  
• Refer to “SPEAKER setting mode”  
on page 17 to check the speaker  
settings.  
• The rear and/or center levels are  
turned down.  
• Refer to “Setting the volume level  
of each channel” on page 21 to  
check the speaker levels.  
• Connect the speakers (refer to  
page 13).  
• The surround and/or center  
speakers are disconnected.  
Sound is produced from other  
components, but not from LD or DVD  
player.  
• SIGNAL SELECT is set incorrectly.  
• Set SIGNAL SELECT to ”DIGITAL” or  
”ANALOG” according to the type of  
connections made (refer to page 29).  
• Set the digital input settings  
• The digital inputs are assigned  
incorrectly, or not at all.  
correctly (refer to page 16, 20, 21).  
No sound is output or a noise is  
output when software with DTS is  
played back.  
• SIGNAL SELECT is set to  
“ANALOG”.  
• Make digital connections (refer to  
page 11) and set SIGNAL SELECT  
to “DIGITAL” (refer to page 29).  
• Refer to the instruction manual  
supplied with the DVD player.  
• A DVD player not compatible with  
DTS is used, or the setting of the  
DVD player is incorrect.  
• The digital output level is adjusted  
on a CD player or other component  
equipped with digital output level  
adjustment capability. (The DTS  
signal has been altered by the  
player, and cannot be read.)  
• Set the digital volume level of the  
player to full, or to the neutral  
position.  
The sound is output intermittently  
when software with DTS is played  
back.  
• The overload indicator is lighting  
(refer to page 24).  
• Set the ADVANCED THEATER  
mode to STANDARD (refer to page  
32).  
When a search is performed by a  
DTS compatible CD player during  
playback, noise is output.  
• The search function performed by  
the player slightly alters the digital  
information, making it unreadable.  
• This is not a malfunction, but be  
sure to turn the volume down to  
prevent the output of loud noise  
from your speakers.  
Cannot be remote controlled.  
• The remote control batteries have  
worn out.  
• Replace the batteries (refer to page 6).  
• Too far away or bad angle of  
operation.  
• Operate within 23 feet (7 m), 30° of  
the remote sensor on the front  
panel (refer to page 7).  
• There is an obstacle between the  
receiver and the remote control.  
• Strong light such as fluorescent  
light is shining onto the unit's  
remote control signal light-  
• Remove the obstacle or operate  
from another position.  
• Avoid exposing the remote sensor  
on the front panel to direct light.  
receiving window.  
• A cord is connected to the  
CONTROL IN terminal on this unit.  
• Connect cord to the correct jack.  
The display is dark.  
• The FL DIMMER button is pushed.  
• Press FL DIMMER on the remote  
control repeatedly to return to the  
default.  
If the unit does not operate normally due to external effects such as static electricity  
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.  
55  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Preset Code List  
Device Manufacturer  
Code  
Device Manufacturer  
Code  
DVD  
TOSHIBA  
SONY  
PANASONIC  
JVC  
SAMSUNG  
SHARP  
AKAI  
001  
002  
003  
004  
005  
006  
007  
TAPE  
OPTIMUS  
PIONEER  
SONY  
TECHNICS  
KENWOOD  
DENON  
RCA  
800  
800  
CD  
301,316,317,318  
304,326  
310,321,311  
309  
302,319,313  
RCA  
PIONEER  
SONY  
009  
000, 003  
101  
PHILIPS  
YAMAHA  
JVC  
312,322  
315,314,328  
303  
LD  
PANASONIC  
KENWOOD  
PHILIPS  
MITSUBISHI  
RCA  
105,106  
103  
104  
100  
107  
TEAC  
305,306,327,324,325  
320,308,307  
323,312,324  
313  
300  
300,329  
901  
903  
902  
904  
905  
906  
900,902  
601,610,615,616,617,618  
603,620  
607,610,603,612,629  
601,608,607,610,617,602,628  
618  
608,622,607  
604  
605,602,626,621  
609,610,602,621  
606,610,624,625,618  
613,623  
ONKYO  
MARANTZ  
SANYO  
OPTIMUS  
PIONEER  
SONY  
KENWOOD  
SHARP  
TEAC  
ONKYO  
DENON  
PIONEER  
RCA  
ZENITH  
MAGNAVOX  
GE  
PIONEER  
100  
102 (DVD code)  
201,203  
202  
MD  
TV  
SAT  
VCR  
RCA  
SONY  
PIONEER  
RCA  
200  
401,406,408,414,405,413,411  
415  
403,404,417  
414,408,426,403  
410,426,412,427,425,420  
408,432,433  
ZENITH  
MAGNAVOX  
FISHER  
PANASONIC  
TOSHIBA  
JVC  
HITACHI  
SONY  
405,409,426  
428,430,429,408,414,431,407  
408,401,406,436,434  
416,417,404,408  
409,420,421,422,423,424,408  
407  
PANASONIC  
SONY  
TOSHIBA  
MITSUBISHI  
HITACHI  
JVC  
MITSUBISHI  
SANYO  
SHARP  
410,412,425,435  
402,418,419  
GOLDSTAR  
OPTIMUS  
411,409  
408,432,433,402,418,419  
SHARP  
SANYO  
602,619,627  
621,614  
GRANDIENTE 452  
PHILIPS  
607  
PIONEER  
SONY  
TECHNICS  
KENWOOD  
TEAC  
400,453  
801,806  
803  
804,807  
805  
GOLDSTAR  
RADIO  
SHACK  
GRADIENTE  
PIONEER  
610,623,621,602  
610,623,621,602  
TAPE  
635  
600  
DENON  
ONKYO  
YAMAHA  
JVC  
810  
CATV* JERROLD  
711,701,702,712,704,713,703  
714,716,715  
705,706,708,709  
707,717,710  
809,808  
811,812  
802  
S.A.  
ZENITH  
PIONEER  
FISHER  
813  
700  
* The CATV codes are preset into TV CONTROL.  
56  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Specifications  
Amplifier Section  
FM Tuner Section  
Frequency Range ...................................... 87.5 MHz to 108 MHz  
Usable Sensitivity ................. Mono: 13.2 dBf, IHF (1.3 µV/75 Ω)  
50 dB Quieting Sensitivity .................................. Mono: 20.2 dBf  
Stereo: 38.6 dBf  
Continuous average power output of 100  
watts* per channel, min., at 8 ohms, from 20  
Hz to 20,000 Hz with no more than 0.09 %**  
total harmonic distortion (front).  
Signal-to-Noise Ratio ............................ Mono: 73 dB (at 85 dBf)  
Stereo: 70 dB (at 85 dBf)  
Distortion .................................................... Stereo: 0.5 % (1 kHz)  
Alternate Channel Selectivity ............................. 60 dB (400 kHz)  
Stereo Separation ................................................... 40 dB (1 kHz)  
Frequency Response ............................. 30 Hz to 15 kHz ( 1) dB  
Antenna Input ................................................... 75 Ω unbalanced  
Continuous Power Output  
Front .................................. 100 W + 100 W (1 kHz, 0.8 %, 8 Ω)  
Center ............................................... 100 W (1 kHz, 0.8 %, 8 Ω)  
Rear ................................... 100 W + 100 W (1 kHz, 0.8 %, 8 Ω)  
Continuous Power Output (DIN)  
Front .......................... 120 W + 120 W (1 kHz, T.H.D. 1 %, 8 Ω)  
Input (Sensitivity/Impedance)  
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE 2  
........................................................................200 mV/47 kΩ  
Frequency Response  
AM Tuner Section  
Frequency Range ........................................531 kHz to 1,620 kHz  
Sensitivity (IHF, Loop antenna) .................................... 350 µV/m  
Selectivity ............................................................................ 25 dB  
Signal-to-Noise Ratio .......................................................... 50 dB  
Antenna ...................................................................Loop antenna  
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE 2  
+0  
–3  
.......................................................5 Hz to 100,000 Hz dB  
Output (Level/Impedance)  
VCR 1 REC, VCR 2 REC, MD/TAPE REC, TAPE 2 REC .......200 mV/2.2 kΩ  
Tone Control  
Miscellaneous  
Power Requirement ............................................ AC 120 V, 60 Hz  
Power Consumption ............................................. 280 W, 400 VA  
Power Consumption in Standby mode ............................. 2.5 W  
AC Outlet  
BASS ................................................................. 6 dB (100 Hz)  
TREBLE .............................................................. 6 dB (10 kHz)  
LOUDNESS ................................. +9 dB/+7 dB (100 Hz/10 kHz)  
Signal-to-Noise Ratio (IHF, short circuited, A network)  
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE 2.......... 97 dB  
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]  
SWITCHED ............................................ 100 W (0.8 A) MAX  
Dimensions ............................... 420 (W) × 158 (H) × 401 (D) mm  
16-9/16 (W) × 6-1/4 (H) × 15-6/8 (D) in  
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE 2.......... 80 dB  
Weight (without package)..............................9.8 kg (21 lb 10 oz)  
VIDEO Section  
Furnished Parts  
Input (Sensitivity/Impedance)  
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO ............... 1 Vp-p/75 Ω  
Output (Level/Impedance)  
VCR 1, VCR 2, MONITOR ...................................... 1 Vp-p/75 Ω  
Frequency Response  
VCR 1, VCR 2, MONITOR .......................... 5 Hz to 7 MHz dB  
FM Antenna ................................................................................. 1  
AM Loop Antenna ....................................................................... 1  
Dry Cell Batteries (SIZE “AA” (IEC LR6)) ................................... 2  
Remote Control Unit ................................................................... 1  
Operating Instructions ................................................................ 1  
Sub instruction manual [System Set up] .................................. 1  
+0  
–3  
Signal-to-Noise Ratio .......................................................... 55 dB  
Cross Talk ............................................................................. 55 dB  
NOTE:  
Specifications and the design are subject to possible modifications  
without notice, due to improvements.  
*
Measured pursuant to the Federal Trade Commission’s Trade  
Regulation rule on Power Output Claims for Amplifiers.  
** Measured by Audio Spectrum Analyzer.  
57  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We Want You Listening For A Lifetime  
S
T
C
S
EIA  
Used wisely, your new sound equipment will provide a lifetime of fun  
and enjoyment. Since hearing damage from loud noise is often undetectable  
until it is too late, this manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group recommend you avoid  
prolonged exposure to excessive noise. This list of sound levels is included  
for your protection.  
We  
EST 1924  
O
S
Want You  
O
LISTENING  
For A Lifetime  
Selecting fine audio equipment such as the unit you’ve just purchased  
is only the start of your musical enjoyment. Now it’s time to consider how  
you can maximize the fun and excitement your equipment offers. This  
manufacturer and the Electronic Industries Association’s Consumer  
Electronics Group want you to get the most out of your equipment by  
playing it at a safe level. One that lets the sound come through loud and  
clear without annoying blaring or distortion-and, most importantly, without  
affecting your sensitive hearing.  
Decibel  
Level Example  
30  
40  
50  
60  
70  
80  
Quiet library, soft whispers  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock  
at two feet.  
Sound can be deceiving. Over time your hearing “comfort level” adapts  
to higher volumes of sound. So what sounds “normal” can actually be loud  
and harmful to your hearing. Guard against this by setting your equipment  
at a safe level BEFORE your hearing adapts.  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER  
CONSTANT EXPOSURE  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet plane  
To establish a safe level:  
100  
120  
140  
180  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly,  
and without distortion.  
Rocket launching pad  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Information courtesy of the Deafness Research Foundation.  
Taking a minute to do this now will help to prevent hearing damage or  
loss in the future. After all, we want you listening for a lifetime.  
EIA  
We  
EST 1924  
Want You  
LISTENING  
For A Lifetime  
Power cord CAUTION!  
Maintenance of External Surfaces  
• Use a polishing cloth or dry cloth to wipe off dust  
and dirt.  
• When the surfaces are dirty, wipe with a soft cloth  
dipped in some neutral cleanser diluted five or six  
times with water, and wrung out well, and then wipe  
again with a dry cloth. Do not use furniture wax or  
cleaners.  
• Never use thinners, benzine, insecticide sprays or  
other chemicals on or near this unit, since these will  
corrode the surfaces.  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power cord  
when your hands are wet as this could cause a short  
circuit or electric shock. Do not place the unit, a piece of  
furniture, etc., on the power cord, or pinch the cord.  
Never make a knot in the cord or tie it with other cords.  
The power cords should be routed such that they are not  
likely to be stepped on. A damaged power cord can  
cause a fire or give you an electrical shock. Check the  
power cord once in a while. When you find it damaged,  
ask your nearest PIONEER authorized service center or  
your dealer for a replacement.  
For Assistance With Basic Set-up, Operation, or Trouble  
Shooting, You May Contact Our Customer Service  
Hotline at 1(800)421-1404(USA ONLY)  
58  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer  
Authorized Independent Service Company, or if you wish to purchase replacement parts, operating  
instructions, service manuals, or accessories, please call the number shown below.  
8 0 0 – 4 2 1 – 1 4 0 4  
Please do not ship your product to Pioneer without first calling the Customer Service Department at  
the above listed number for assistance.  
PIONEER ELECTRONICS SERVICE, INC.  
CUSTOMER SERVICE DEPARTMENT  
P.O. BOX 1760, LONG BEACH,  
CA 90801-1760, U.S.A.  
For warranty information please see the Limited Warranty sheet included with your product.  
Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer  
to locate the nearest Pioneer Authorized Service Company in Canada.  
Alternatively, please contact the Customer Service Department at the following address:  
Pioneer Electronics of Canada, Inc.  
Customer Service Department  
300 Allstate Parkway, Markham, Ontario L3R  
OP2  
(905) 479-4411  
1-877-283-5901  
For warranty information please see the Limited Warranty sheet included with your product.  
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisée Pioneer  
au Canada pour obtenir le nom de la Société de Service Autorisée Pioneer le plus près de chez  
vous. Ou encore, veuillez vous communiquer avec le Service de Clientèle de Pioneer:  
Pioneer électroniques du Canada, Inc.  
Département de service au consommateurs  
300 Allstate Parkway, Markham, Ontario L3R  
OP2  
(905) 479-4411  
1-877-283-5901  
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la Garantie  
Limitée gui accompagne le produit.  
59  
<ARB7181>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Published by Pioneer Electronic Corporation.  
Copyright © 1999 Pioneer Electronic Corporation.  
All rights reserved.  
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS [USA] INC. P.O. BOX 1540, Long Beach, California 90801-1540  
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada  
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: 03-9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90  
Printed in  
Download from Www.Somanuals.com. All Manuals Search And Download.  
<ARB7181-A>  
<99A00ZF0D00>  

Peavey Musical Instrument Amplifier 115 DLM User Manual
Pelco Camera Accessories CM3000 User Manual
Philips Car Amplifier A961 User Manual
Philips Flat Panel Television 150S7 User Manual
Philips Iron GC1701 User Manual
Philips Switch SWS3685W 10 User Manual
Philips TV Converter Box SWS2104W User Manual
Pitney Bowes Scale G799 User Manual
Polaris Offroad Vehicle 500 HO User Manual
Polk Audio Headphones AM1600 A User Manual