Philips TV VCR Combo 21PV708 715 908 39 User Manual

CONTENTS  
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4  
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Connecting a decoder or other equipment . . . . . . . . . . . . 4  
Programming a recording (without ’SHOWVIEW’) . . . . 18  
Programming a recording with TELETEXT . . . . . . . . . . . 19  
Automatic recording from a satellite receiver (SAT  
RECORDING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 20  
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5  
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 7  
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 7  
Searching for new TV channels . . . . . . . . . . . . . . . . . . . . . 8  
Allocating a channel number . . . . . . . . . . . . . . . . . . . . . . . 8  
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Changing the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Switching the On-screen display (OSD) on or off . . . . . 22  
Switching to 16:9 wide screen picture . . . . . . . . . . . . . . 22  
Switching the internal speakers on or off . . . . . . . . . . . . 23  
Switching the remote control command . . . . . . . . . . . . . 23  
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Sound playback without picture . . . . . . . . . . . . . . . . . . . . 24  
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 25  
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 25  
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 10  
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . 10 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 26  
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 12  
Selecting the picture setting (SMART PICTURE) . . . . . . 12  
Switching Incredible Surround on or off . . . . . . . . . . . . . 12  
Selecting a preset sound setting (SMART SOUND) . . . 13  
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 13  
Sound track selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Playing an NTSC cassette . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Searching for tape position with the picture (picture  
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Searching for tape position without the picture (wind  
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Automatic search for a tape position (index search) . . 14  
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 15  
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Recording without automatic switch-off . . . . . . . . . . . . 16  
Recording with automatic switch-off (OTR  
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 16  
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 17  
’VPS’ (Video Programming System) and ’PDC’  
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 17  
Programming a recording (with ’SHOWVIEW’) . . . . . . . 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS IN BRIEF  
The remote control  
y
Volume off: To switch the volume on or off  
z
Previous programme number: To select the previous programme number  
TELETEXT e TELETEXT: To switch TELETEXT on or off  
PLAY G Playback : To play a recorded cassette  
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning  
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made  
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning  
STANDBY m Switch off : To switch off set, interrupt menu  
function, interrupt a programmed recording (TIMER)  
H
SURROUND Surround Sound : To switch Surround Sound on/off  
SMART SMART PICTURE : To call up preset picture settings  
SMART # SMART SOUND : To call up preset sound settings  
AUDIO Audio : To select the required sound track  
0-9 Number buttons: 0 - 9  
I
INDEX E Index search: In combination with  
H
/
I
: to search for previous/next recording on the  
cassette  
RECORD/OTR n Record: To record the programme selected  
STILL R Still picture: To stop the tape and show a still picture  
CLEAR Delete : To delete last entry or clear programmed  
recording (TIMER)  
Coloured TELETEXT buttons:To select TELETEXT page directly  
n red To select page/chapter shown in red at the bottom of the screen  
n green To select page/chapter shown in green at the bottom of the screen  
n yellow To select page/chapter shown in yellow at the bottom of the screen  
n blue To select page/chapter shown in blue at the bottom of the screen  
CLEAR TELETEXT: To select TELETEXT info page 100  
TIMER s TIMER: To make a manual TIMER programming or to  
alter or clear a programmed TIMER  
MENU Menu : To call up or end main menu  
OK Store/Confirm: To store or confirm entry  
D
C
Select: Cursor left  
Select: Cursor right  
Select: One line up  
Select: One line down  
A
B
qSr Volume: To regulate the volume  
qP r Programme number: To select a programme number  
up or down  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front of the set  
AUDIO L/R Audio input socket left/right stereo  
VIDEO Video input socket : To connect a camcorder or videogames  
w
Headphones socket: To connect headphones  
Back of the set  
8
Power switch : To switch off the machine  
Beware: If you switch off with the power switch, TIMER-recordings are not possible!  
2
Aerial input socket: To connect the aerial cable  
AUDIO AUDIO: To connect a HiFi-set or a ’Dolby Prologic’-decoder.  
EXT. 1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.  
EXT. 2 Scart socket: To connect a satellite receiver, video recorder, camera recorder etc.  
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)  
P r/q Programme number : To select programme number up or down  
Sr/qx Volume: To regulate the volume, to switch on the automatic recording from a satellite receiver  
H
I
5
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning  
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning  
Record: To record the programme selected  
G
Playback : To play a recorded cassette  
?
Pause/Stop: To stop the tape, except while a TIMER-recording is being made  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special functions on your TV-VIDEO Combi  
If a TV channel which transmits TXT/PDC is stored under programme number  
P01’, time and date will automatically be taken from the TXT/PDC information.  
Crystal Clear video has become the synonym for outstanding picture quality  
combining Philips’ very latest technologies: Natural Colour, Studio Tracking  
System, Digital Studio Picture Control and laser-cut video heads.  
Philips has developed a system which produces the best possible playback  
quality. It reduces disturbance on old, worn video cassettes, and emphasises  
the detail on very good quality cassettes.  
This function allows you to save the playback settings that suit you best. Select  
your own personal settings for the type of film you are currently watching.  
This function allows you to save the sound settings that suit you best. Select  
your own personal settings for the type of film you are currently watching.  
When you have plugged your TV-VIDEO Combi into the mains, you will be  
welcomed with an OSD picture. All you have to do is follow the instructions in  
the "intelligent help line" for the next step. Enjoy the Automatic TV channel  
search/save function and the automatic time adjustment.  
Automatic Volume Leveller. This prevents a sudden increase of the volume, for  
example, during commercials.  
Incredible Surround is the newest sound-improvement system from Philips. This  
feature gives the acoustic impression of a very wide stereo effect even if the  
speakers are located relatively close together.  
Simple programming system for TV-VIDEO Combis. Makes programming as easy  
as making a telephone call. Simply enter the programme code which you will  
find in your listings magazine.  
The precision tape drive from Philips with a rewind time of 100 seconds (E180)  
and automatic tape length recognition.  
By using the information stored in the Teletext pages you can programme  
recordings on the TV-VIDEO Combi in just a few convenient steps.  
One Touch SAT Recording is the new ease-of-use solution for TV-VIDEO Combis  
to record programmes from your SAT receiver in a convenient way.  
Your TV-VIDEO Combi has been equiped with two tuners. This enables you to  
watch a programme while you are recording another programme.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. CONNECTING YOUR TV-VIDEO COMBI  
Connecting the cables  
a Insert the aerial plug into the 2 socket.  
b Insert the plug of the mains cable into the wall socket.  
c If the little red light at the front panel of the set is not lit,  
please switch on the set. The power switch 8 is  
located on the left side panel of the set.  
Connecting a decoder or other equipment  
You can also connect additional equipment. For instance, a  
satellite receiver, decoder or camcorder to EXT. 1 or a  
satellite receiver, or camcorder to EXT. 2 .  
E If you don’t connect a decoder, use the EXT. 1 socket for  
connecting other equipment.  
You can connect a HiFi-stereo set or a ’Dolby Prologic’  
decoder to the socket AUDIO OUT L/R (audio output left/right).  
DIf you want to switch off the internal speakers please  
read chapter ’ADDITIONAL FUNCTIONS’, paragraph  
’Switching the internal speakers on or off’.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. INSTALLING YOUR TV-VIDEO COMBI  
E Time’, ’Year’, ’Month’, ’Date’ will appear on the  
Initial installation  
TV screen.  
a Open up the battery compartment of your remote control  
and place the batteries in it as shown in the picture.  
Autostore ready  
CHANNELS FOUND:  
08  
Time  
Year  
Month  
Date  
15:36  
2000  
06  
08  
Exit:  
press MENU  
b Close the battery compartment.  
c Select the language for the on-screen display (OSD) with h Check if the time in line ’Time’ is correct. If required,  
the B or A button.  
change the time with the number buttons 0-9 on your  
remote control.  
d Confirm with the OK button.  
i Check ’Year’, ’Month’ and ’Date’ in the same way.  
e Select the country of your residence with the B or  
You can switch between entry fields with B or  
A
A button.  
button.  
If this country does not show up, select ’OTH.’.  
j Confirm the new information with the OK button.  
f Confirm with the OK button.  
The initial installation is now complete.  
g If the aerial (antenna) has been connected to the  
TV-VIDEO Combi, press the OK button.  
’Automatic TV channel search’ starts. This picture will  
appear on the screen:  
DIf you have connected a decoder, you must install it  
as described in the next section.  
DIf you have connected a satellite receiver, please  
read the section ’satellite receiver’.  
Allocating a decoder  
Searching...  
CHANNELS FOUND:  
Some TV stations will send coded TV channels, that you can  
only watch when you use a decoder. You can connect such a  
decoder (descrambler) to your TV-VIDEO Combi. With the  
following function, the connected decoder will automatically  
be activated for the TV programme you want to watch.  
//////,,,,,,,,,,,,,,,,,,,,,  
a Select the TV channel for which you want to use the  
decoder with the qP r button on the TV-VIDEO Combi  
or the number buttons 0-9 on the remote control.  
Wait until all TV channels have been found. This can take  
several minutes.  
b Press the MENU button on the remote control. The main  
menu will appear.  
c Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
d Select the line ’Manual store’ with the B or  
A button and confirm with the C button.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
e Select the line ’Decoder’ with the B or A button.  
d In the line ’Channel/Frequency’, select the  
display for:  
FREQU.: frequency  
MANUAL STORE  
C CH: channel  
S CH: special channel  
Channel/Frequency  
TV system  
Search  
FREQU.  
PAL-BG  
123  
e If you know the frequency or channel of the desired TV  
channel, you can enter the data in line ’Search’ with  
the digit buttons 0-9 .  
Fine tuning  
Name edit  
Programme number  
Decoder  
(,,,,=,,,,$  
xxx  
01  
OFF  
ON  
NICAM  
DIf you don’t know the frequency or channel of the TV  
channel of your choice, press the C button to start  
the channel search.  
Exit:  
press MENU  
f In the line ’Programme number’ select the  
programme number you want e.g.: ’01’, using the D or  
C button.  
f Select function ’ON’ with the D or C button. When  
you select ’OFF’, the function will be switched off.  
g Confirm with the OK button.  
g If you want to change the TV channel name, press the  
h To end, press the MENU button.  
C button in line ’Name edit’.  
Your decoder has now been allocated to this TV channel.  
E Select the character you want to change with the D or  
the C button. Change the character with the B or the  
A button. Select the next character in the same way.  
i Press the MENU button again.  
DIf you have programmed a recording (TIMER), a  
wake-up timer or a sleep-timer, you can’t select the  
function ’Manual store’.  
E To confirm the information, press the OK button.  
h In the line ’NICAM’, select funtion ’ON’ or ’OFF’ with  
the C or D button.  
i If you want to change the automatic tv channel setting,  
select the line ’Fine tuning’.  
Manual TV channel search  
With the D or C button you can vary the automatic tv  
channel setting. Important: This re-tuning is only  
necessary and useful in special cases, e.g.: when there  
are stripes on the picture with cable-TV systems.  
In certain cases the ’Automatic TV channel search’ may not be  
able to find all of the TV channels (e.g. coded TV channels). In  
that case, use this manual method to set the channels.  
a Press the MENU button on the remote control. The main  
j Press the OK button to store the TV channel.  
menu will appear.  
DIf you want to search for further TV channels, start  
b Select the line ’Installation’ with the B or  
again at step e.  
A button and confirm with the C button.  
k To end, press the MENU button.  
c Select the line ’Manual store’ with the B or  
DIf you have programmed a recording (TIMER), a  
wake-up timer or a sleep-timer, you can’t select the  
function ’Manual store’.  
A button and confirm with the C button.  
MANUAL STORE  
Channel/Frequency  
TV system  
FREQU.  
PAL-BG  
123  
Satellite receiver  
Search  
Fine tuning  
Name edit  
Programme number  
Decoder  
(,,,,=,,,,$  
xxx  
01  
OFF  
ON  
You can receive channels from the satellite receiver via the  
scart socket EXT. 1 .  
NICAM  
To do this, select the channel number ’E1’ with the qP r  
button. You will have to select the channels to be received by  
the satellite receiver on the receiver itself.  
Exit:  
press MENU  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
E Time’, ’Year’, ’Month’, ’Date’ will appear on the  
Special installation functions  
TV screen.  
You can select one of the following installation functions in  
order to adapt your TV-VIDEO Combi to your own specific  
requirements.  
Autostore ready  
CHANNELS FOUND:  
08  
Automatic TV channel search  
Time  
Year  
Month  
Date  
15:36  
2000  
06  
Your TV-VIDEO Combi will search for all TV channels.  
If you want to start the automatic TV channel search again,  
then follow the instructions below.  
08  
Exit:  
press MENU  
a Press the MENU button on the remote control. The main  
menu will appear.  
h Check if the time in line ’Time’ is correct. If required,  
change the time with the number buttons 0-9 on your  
remote control.  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
c Select the line ’Autostore’ with the B or  
A
i Check ’Year’, ’Month’ and ’Date’ in the same way.  
button.  
Switch between the entry fields with the B or  
A
button.  
d Press the C button.  
j Confirm each line with the OK button.  
e Select the country you are in with the B or A button.  
If your country doesn’t show up, select ’OTH.’.  
How to search for a TV channel manually, you can read in the  
section ’Manual TV channel search’.  
f Confirm with the OK button. The ’Automatic TV channel  
search’ starts.  
DIf you have programmed a recording (TIMER), a wake-up  
timer or a sleep-timer, you can’t select the function  
Autostore’.  
DAutomatic Channel Installation:  
Searching...  
Some cable companies or broadcasters offer the  
possibility to install TV channels automatically with ’ACI’.  
Information about the installation offered and how to  
select it, will appear on the screen.  
CHANNELS FOUND:  
//////,,,,,,,,,,,,,,,,,,,,,  
This set will recognize and install TV channels with ’ACI’  
automatically.  
TV channels will be stored from programme number 1  
onward.  
If ’ACI’ cannot identify a TV channel, you can search for it  
using the method as described in the section ’Manual TV  
Channel Search’.  
g When the TV channel search is complete,  
Autostore ready’ will appear on the screen.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIf you have programmed a recording (TIMER), a  
wake-up timer or a sleep-timer, you can’t select the  
function ’Sort channels’.  
Searching for new TV channels  
a Press MENU . The main menu will appear.  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
Delete a TV Channel  
c Select the line ’Add new channels’ with the  
B or A button and confirm with the C button.  
Channel search will start.  
a Press the MENU button. The main menu appears.  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button .  
d To store the TV channel, press OK .  
c Select the line ’Sort channels’ with the B or  
e Repeat step d, until you have found all desired TV  
A button and confirm with the menu button C .  
channels.  
DIf you have programmed a recording (TIMER), a  
wake-up timer or a sleep-timer, you cannot select  
the function ’Add new channels’.  
SORT CHANNELS  
01 zzz  
02 yyy  
03 xxx  
04 aaa  
05 bbb  
06 ccc  
Allocating a channel number  
a Press the MENU button. The main menu will appear.  
Exit:  
press MENU  
To move:  
press OK  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
d With the B , A , D or C button, select the TV  
c Select the line ’Sort channels’ with the B or  
channel you want to delete and press the CLEAR button.  
A button and confirm with the C button.  
e Repeat step d, until you have deleted all the required  
SORT CHANNELS  
TV channels.  
01 zzz  
02 yyy  
03 xxx  
04 aaa  
05 bbb  
06 ccc  
f To end, press the MENU button.  
DIf you have programmed a recording (TIMER), a  
wake-up timer or a sleep-timer, you can’t select the  
function ’Sort channels’.  
Exit:  
press MENU  
To move:  
press OK  
d With the B , A , D or C button, select the TV  
channel to which you want to allocate a programme  
number and press the OK button.  
e With the B , A , D or C button, shift the TV  
channel to the programme number you wish to allocate to  
this TV channel and press the OK button.  
f Repeat steps dto euntil you have allocated a  
programme number to all the required TV channels.  
g To end, press the MENU button.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the language  
Setting the time and date  
a Press the MENU button on the remote control. The main  
You can select the language for the on-screen display (OSD).  
menu will appear.  
a Press the MENU button on the remote control. The main  
b Select the line ’Installation’ with the buttons  
menu will appear.  
B or A and confirm with the button C .  
c Select the line ’Set clock’ with the B or  
A
button and confirm with the C button.  
MAIN MENU  
Picture  
Sound  
Setup  
SET CLOCK  
Tape  
Installation  
Time  
15:36  
2000  
06  
08  
ON  
Year  
Exit:  
press MENU  
Month  
Date  
Smart clock  
Exit:  
press MENU  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
d Check the time in line ’Time’. If required, please change  
the time with the 0-9 buttons on the remote control.  
e Check ’Year’, ’Month’ and ’Date’ in the same way.  
INSTALLATION  
You can switch between entry fields with B or  
A
Add new channels  
Sort channels  
Autostore  
button. Confirm with the OK button.  
Manual store  
Set clock  
f To end, press the MENU button.  
Language  
ENGLISH  
Automatic time and date setting  
(SMART CLOCK)  
Exit:  
press MENU  
DIf a television programme, which transmits TELETEXT, is  
stored with programme number ’P01’, time and date will  
be set automatically.  
c Select the line ’Language’ with the B or  
A
button.  
DThe time will automatically be adjusted to winter time and  
d Select your language with the D or C button.  
summer time.  
e To end, press the MENU button.  
a Press the MENU button on the remote control. The main  
menu will appear.  
b Select the line ’Installation’ with the buttons  
B or A and confirm with the button C .  
c Select the line ’Set clock’ with the B or  
A
button and confirm with the C button.  
d Select the line ’Smart clock’ with the menu buttons  
B or A .  
e Switch the function on with the menu buttons D or  
C .  
f Confirm with the OK button.  
g To end, press the MENU button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. IMPORTANT NOTES FOR OPERATION  
SUMMARY OF USER GUIDE  
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.  
PICTURE  
MAIN MENU  
Brightness  
(,,,,,,,,,  
(,,,,,,,,,  
(,,,,,,,,,  
(,,,,,,,,,  
Picture  
Sound  
Colour  
Contrast  
Sharpness  
Tint  
Setup  
Tape  
Installation  
NATURAL  
NO  
Store as pref.  
Exit:  
press MENU  
Exit:  
press MENU  
Chapter ’TV FUNCTIONS’  
User guide (OSD)  
SOUND  
The OSD (On-screen display) shows the various functions in  
the form of a menu on the television screen. You can then  
choose the settings you require. There is a summary of the  
menus on this page. The main button functions are displayed  
in a help line along the bottom of the screen.  
Volume  
Balance  
Bass  
(,,,,,,,,,  
(,,,,=,,,,$  
(,,,,=,,,,$  
(,,,,=,,,,$  
Treble  
Sound mode  
NEUTRAL  
OFF  
ON  
NO  
Surround  
Auto volume cont.  
Store as pref.  
E To call up the menu: With the MENU button.  
E To select a line: With the B or A button.  
E To select within a line: With the D or C button.  
Exit:  
press MENU  
Chapter ’TV FUNCTIONS’  
E To enter or change your selection: With the 0-9 , D or  
C button.  
E To enter or change your selection in the TIMER entry  
SETUP  
columns: With the B or A button.  
Parental control  
OFF  
MAX  
NORMAL  
ON  
E To cancel: With the MENU button.  
E To save: With the OK button.  
E To confirm: With the C button.  
E To exit the menu: With the MENU menu button.  
Display  
Format 16:9  
Speakers  
Sound only  
VCR 1/2  
ON  
VCR  
1
Exit:  
press MENU  
Chapter ’ADDITIONAL FUNCTIONS’  
TAPE  
Tape speed  
Tape counter  
Repeat play  
Video system  
Jitter  
SP  
LEFT  
OFF  
AUTO  
(,,,,=,,,,$  
(,,,,=,,,,$  
E To confirm the messages in red on the screen: Press the  
OK button.  
Tracking  
Cleaning  
E You can switch the machine on with the qP r ,  
z
Exit:  
press MENU  
or 0-9 button or by putting in a cassette.  
Chapter ’PLAYBACK FUNCTIONS’  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important notes for operation  
E We suggest that, from now on, you switch off your  
TV-VIDEO Combi with the STANDBY m button on the front  
of the set or on the remote control.  
When the set is in the standby mode, a small red lamp at  
the front of the set will be alight.  
E You can switch on with the qP r or z button, the  
0-9 buttons or by inserting a cassette.  
AAttention: If you use the power switch 8 on the side  
panel, you switch off the set completely from the mains  
power supply. No programmed recordings will then be  
made. The red lamp at the front of the set will not be  
alight. After some time, the date and clock settings will be  
lost.  
We advise you to keep your TV-VIDEO Combi connected  
to the mains at all times to ensure that programmed  
recordings can be made and that the television works  
normally. The power consumption will be low.  
E Attention: If you switch off the appliance with the power  
switch 8 , make sure that you have removed the tape  
by pressing the ? button.  
E If you diconnect your TV-VIDEO Combi from the mains,  
TIMER and channel information will remain stored for  
about 1 year and clock information will remain stored for  
30 minutes.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. TV SET FUNCTIONS  
Selecting a TV programme  
Volume control  
Select the required TV channel (=programme number) with the You can control the volume level with the qSr button.  
qP r button or with the digit buttons 0-9 on the remote  
control.  
If you want to mute the sound temporarily (e.g.: during a  
telephone call), press the y button on the remote control.  
When you press the y button again, the sound will return at  
its original volume level.  
DIf you don’t know the programme number of the required  
TV channel:  
a Press the qP r button for more than 2 seconds.  
The TV channel list appears on the screen.  
Sound settings  
b Select the required TV channel with the qP r  
button.  
You can select between several sound settings, to meet your  
personal sound preferences.  
After 1 second the TV-VIDEO Combi will switch to  
the selected programme number.  
a Press the MENU button. The main menu appears.  
b Select the line ’Sound’ with the B or A button and  
confirm with the C button.  
Picture settings  
a Press the MENU button. The main menu appears.  
SOUND  
b Select the line ’Picture’ with the menu buttons  
B
Volume  
(,,,,,,,,,  
(,,,,=,,,,$  
(,,,,=,,,,$  
(,,,,=,,,,$  
NEUTRAL  
or A and confirm with the menu button C .  
Balance  
Bass  
Treble  
Sound mode  
Surround  
OFF  
Auto volume cont.  
Store as pref.  
ON  
NO  
PICTURE  
Exit:  
Brightness  
(,,,,,,,,,  
(,,,,,,,,,  
(,,,,,,,,,  
(,,,,,,,,,  
press MENU  
Colour  
Contrast  
Sharpness  
Tint  
c Select the required line with the B or A button and  
NATURAL  
NO  
Store as pref.  
alter with the D or C button.  
Exit:  
press MENU  
E In the line ’Sound mode’ select one of these options:  
NEUTRAL: neutral sound setting  
LOUDN.: when the volume level is low, high and low  
sound will be emphasized.  
SPATIAL: spacious stereo effect  
c Select the required line with the menu buttons B or  
A and alter with the menu buttons D or C .  
D’Contrast Plus’: Enhances TV contrast by whitening  
DTo store a setting as a standard setting, select the  
the white and blackening the black.  
line ’Store as pref.’ with the B or  
button. Select ’YES’ and confirm with the OK  
button.  
A
DTo store this setting as a standard setting, select the  
line ’Store as pref.’ with the menu buttons  
B or A . Select ’YES’ and confirm with the  
OK button.  
DTo call up the standard settings, switch the set off  
and on again or select ’Smart Sound’ setting  
Personal’.  
DTo call up the standard settings, switch the set off  
and on again or select ’Smart Picture’ setting  
Personal’.  
Switching Incredible Surround on or off  
a To switch on the ’Incredible Surround’ effect, in the line  
Selecting the picture setting  
(SMART PICTURE)  
Surround’ select ’ON’ with the D or C button.  
E You can always simply switch the function on or off with  
D’SMART PICTURE’: Optimises all picture settings using a  
the SURROUND button on the remote control.  
single button on the remote control.  
DIf Surround Sound is switched on, the line ’Sound  
E Press the SMART button repeatedly to select the  
mode’ in the Sound menu will be deactivated.  
required picture setting.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a preset sound setting (SMART  
SOUND)  
Extra TELETEXT functions  
To use the extra TELETEXT functions, press the MENU button,  
when you are in TELETEXT.  
D’SMART SOUND’: provides a choice of sound settings  
from the remote control.  
E To enlarge the print, select the symbol ’g’ and confirm  
with the OK button.  
E Press the SMART # button repeatedly to select the  
desired sound setting.  
E To switch off the TELETEXT decoder temporarily, select  
the symbol ’d’ and confirm with the OK button.  
DIf the Surround function is switched on, ’Smart Sound’  
will be switched to ’Manual’.  
E To call up a TELETEXT sub-page:  
a Select the symbol ’}’ and confirm with the OK  
Automatic volume control (AVL)  
button.  
E Switch on ’Auto volume cont.’, to activate the  
automatic volume control. This will minimise sudden  
changes in TV volume, e.g. when commercial spots are  
being transmitted or when switching TV channels.  
b Enter the page number of the sub-page with the  
0-9 -buttons (e.g.: 0123).  
E To call up concealed information, select the symbol ’b’  
and confirm with the OK button.  
DThe AVL function will only affect the internal speakers.  
E To stop the pages from being turned over, select the  
symbol ’f’ and confirm with the OK button.  
E To show TELETEXT transparently, select the symbol ’-’  
Sound track selection  
and confirm with the OK button.  
You can select the required sound track. This is of particular  
interest when audio transmissions are multilingual.  
E Press the AUDIO button to select one of the following  
options:  
STEREO transmissions: Stereo’ and ’Mono’  
Multilingual transmissions: Dual I’ and ’Dual II’  
DWhile a tape is playing, you can also select one of the  
following modes: ’Left’, ’Right’, ’Mix’. In the ’Mix’  
mode you can play the mono sound of the normal (linear)  
audio track together with the sound of the stereo audio  
track. You can play cassettes that have been dubbed on  
another video recorder.  
How to read TELETEXT  
E Press the TELETEXT e button to switch the TXT decoder  
on and off. The TV-VIDEO Combi is now receiving the TXT  
of the TV channel currently selected.  
E To store the current page as preferred page, press the  
OK button.  
The next time you call up TELETEXT, you will  
automatically turn to this page.  
E If you want to select an other page, type in the number of  
the page with the digit buttons 0-9 . With the colour  
buttons on your remote control you can directly select  
the page numbers shown at the bottom of the TV screen.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PLAYBACK FUNCTIONS  
Playing a cassette  
Searching for tape position with the picture  
(picture search)  
a Put a cassette into the cassette slot.  
b Press the PLAY G button.  
a While a cassette is playing, press the H (reverse) or  
I (forward) button once or several times.  
E If you press the STOP h button once, the TV-VIDEO  
Combi will switch to pause. To stop, press the STOP h  
button again.  
b To stop at a certain picture, press the PLAY G button.  
DDuring picture search, the picture quality may not be  
so good and there will be no sound.  
E To eject the cassette, press the ? button on the  
TV-VIDEO Combi or press the STOP h button on the  
remote control several seconds.  
Still picture  
a Press the STILL R button. A still picture will appear on  
DBefore transportation, make sure that no cassette is  
the screen.  
in the TV-VIDEO Combi.  
b Each time you press STILL R again, the picture will  
DIf you insert an erase protected cassette, the  
move on one step.  
TV-VIDEO Combi will automatically start playback.  
DSome hired cassettes may have poor picture or  
sound quality. This is not a fault in your machine.  
Please read ’Eliminating picture interference’.  
Slow motion  
a Press the STILL R button. A still picture will appear on  
the screen.  
DSome functions will automatically switch off after a  
while (for example, pause, still picture, picture  
search). This helps to protect the cassette and  
avoids wasting power.  
b When you hold the STILL R button, the tape will be  
played in slow motion.  
c When you press the I button several times, you have  
a choice of several playback speeds.  
During slow motion there will be no sound.  
Playing an NTSC cassette  
With this set you can play cassettes that have been recorded  
on another video recorder in the NTSC standard (for example,  
American cassettes).  
Searching for tape position without the  
picture (wind and rewind)  
a Stop the tape with the STOP h button.  
b Press the H (reverse) or I (forward) button.  
c To stop at a certain picture, press the STOP h button.  
DSome special features (for example, still picture) are not  
possible while you are playing an NTSC cassette.  
Instant View  
Tape position indication  
With this function you can switch to picture search during  
wind and rewind.  
DPress the OK button to display the current tape position.  
DTo change the type of tape position display, proceed as  
a If you hold the H (rewind) or I (wind) button  
follows:  
during wind or rewind, you will switch to picture search.  
a During playback, press the MENU button.  
b When you release the button, the TV-VIDEO Combi will  
automatically switch back to rewind or wind.  
b Select the line ’Tape’ with the menu buttons B or  
A and confirm with the C button.  
Automatic search for a tape position (index  
search)  
At the start of each recording, the TV-VIDEO Combi will write  
an index code on the tape.  
c Select the line ’Tape counter’ with the menu  
buttons B or A .  
d With the menu buttons D or C select ’USED’ to  
check the time used, or ’LEFT’ to check the time left on  
the tape.  
a Press the INDEX E button. Press the I button to  
select the next code mark or the H button for the  
previous code mark.  
e Confirm with the OK button.  
b When the TV-VIDEO Combi finds the code mark, it will  
automatically switch to play.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture interference  
Cleaning the video heads  
If horizontal lines appear on the screen when you play a  
cassette, you should clean the video heads.  
When the picture quality is poor when you play a cassette,  
please follow these instructions.  
Tracking during playback  
a During playback, press the MENU button.  
b Select the line ’Tape’ with the buttons B or A and  
confirm with the C button.  
c Select the line ’Tracking’ with the buttons B or  
A .  
d Hold the buttons D or C until the playback quality is  
at its best.  
e Confirm with the OK button.  
a During playback, press the MENU button.  
f To end, press the MENU button. This setting will remain  
b Select the line ’Tape’ with the menu buttons B or  
until you remove the cassette.  
A and confirm with the C button.  
c Select the line ’Cleaning’ with the menu buttons  
Tracking during still picture  
If the still picture vibrates vertically, you can improve the still  
B or A .  
d Press the OK button. ’CLEANING’ appears on the  
picture as follows:  
screen.  
a During still picture, press the MENU button.  
e Wait a few seconds, until the message disappears and  
b Select the line ’Tape’ with the B button or A and  
then press the MENU button.  
confirm with the C button.  
c Select the line ’Jitter’ with the B or A button.  
d Hold the D or C button until the picture quality is at  
its best.  
e Confirm with the OK button.  
f To end, press the MENU button.  
DPlease note, however, that interference may still  
occur with poor quality cassettes.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. MANUAL RECORDING  
Use ’Manual Recording’ to make a spontaneous recording (for  
example, a programme currently being shown).  
Protecting your recordings  
So that you don’t accidentally delete an important recording,  
remove the special tab on the narrow side of the cassette with  
a screwdriver or slide the special tab to the left. Later, if you  
no longer want to protect your recording, you can seal the gap  
again with sticky tape or slide the special tab to the right.  
E If you want to start and stop a recording manually, read  
the section: ’Recording without automatic switch-off’.  
E If you want to start a recording manually but have it  
stopped automatically, read the section: ’Recording with  
automatic switch-off’.  
Auto-assembling  
Recording without automatic switch-off  
You can use the auto-assembling function to join individual  
recordings without any major picture disturbance between  
them.  
a Insert a cassette.  
b Use the qP r button to select the programme number  
you want to record, for example, ’P01’.  
a While the cassette is playing, search for the correct  
DProgramme number ’E1’ is provided for recording  
position on the tape.  
from external sources (via the EXT. 1 scart socket).  
b Stop the cassette by pressing the STOP h button.  
Pause’ will appear on the TV screen.  
DProgramme number ’AV’ is provided for recording  
from external sources (via the Audio/Video socket  
AUDIO L/R at the front of the TV-VIDEO Combi).  
c Now start recording as usual by pressing the  
RECORD/OTR n button on the remote control.  
c To start recording, press the RECORD/OTR n button on the  
remote control or 5 on the TV-VIDEO Combi.  
When you are recording, the red recording light at the  
front panel of the TV-VIDEO Combi will be lit.  
Selecting the recording speed (SP or LP)  
You can reduce the recording speed by half. This makes it  
possible to record, for example, eight-hours instead of  
four-hours on an ’E240’ (four-hour) cassette.  
d Stop recording with the STOP h button.  
DIf you want to switch off the screen while recording,  
press the STANDBY m button once .  
a Press the MENU button. The main menu appears.  
DTo switch the screen back on again, press the  
b Select the line ’Tape’ with the B or A button, and  
qP r button.  
confirm with the C button.  
DDuring a recording you can watch other TV  
c Select the line ’Tape speed’ with the B or  
A
channels.  
button.  
d Select the required recording speed with the D or  
C button.  
Recording with automatic switch-off  
(OTR one-touch-recording)  
DLP: Long Play = half recording speed (double  
recording time).  
SP: Standard Play = normal recording speed.  
a Put a cassette in the machine.  
DThe picture quality will be adversely affected when  
b Use the qP r button to select the programme number  
recording at half recording speed (’LP’).  
you want to record.  
DFor playback, the correct recording speed will  
c Press the RECORD/OTR n button on the remote control.  
When you are recording, the red recording light at the  
front panel of the TV-VIDEO Combi will be lit.  
automatically be selected.  
e Confirm with the OK button.  
f To end, press the MENU button.  
d Press the RECORD/OTR n button again and again until the  
display on the TV-VIDEO Combi shows the desired end  
time or length of the recording.  
DTo cancel this information, press the CLEAR button.  
e Confirm with the OK button.  
f To end, press the MENU button.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. PROGRAMMED RECORDING (TIMER)  
Use programmed recording to automatically start and stop a  
recording at a later date.  
c Enter the entire SHOWVIEW-number (up to 9 digits)  
printed in your TV guide next to the start time of a TV  
programme.  
To make a programmed recording, your TV-VIDEO Combi  
needs to know:  
For example, 5-234-89 or 5 234 89  
Enter 523489 for the SHOWVIEW-number.  
If you make a mistake, you can clear your instructions  
with the CLEAR button.  
* the date you want to make the recording;  
* the programme number for the TV channel you want to  
record;  
* the start and stop time of the recording;  
* whether you want to use VPS or PDC;  
* the recording speed (SP/LP).  
ShowView  
The TV-VIDEO Combi stores all the information in a TIMER  
block. You can programme up to 6 TIMER blocks a month in  
advance.  
CODE  
REPEAT  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
1
2
3
4
5
6(  
(
(
ONCE  
0-9  
Store:  
press OK  
’VPS’ (Video Programming System) and  
’PDC’ (Programme Delivery Control)  
With ’VPS and PDC’, the TV station controls the start time and  
the length of the recording. This means that the TV-VIDEO  
Combi switches itself on and off at the right time even if a TV  
programme you want to record begins earlier or finishes later  
than expected.  
Usually the start time is the same as the VPS or PDC time. But  
if your TV guide gives a VPS or PDC time which is different to  
the programme’s start time (for example, 20.15 and VPS 20.14),  
you must enter ’20.14’ as the start time.  
d In line ’REPEAT’ select the kind of programming  
required with the B or A button.  
ONCE: recording only once  
Mo-Fr: recordings every day from Monday to Friday.  
Mo-Su: recordings every day from Monday to Sunday.  
WEEKLY: recordings every week on the same day of  
the week.  
e Confirm with the OK button. Your programming details  
will then appear on the TV screen.  
If you want to programme a time that is different from the VPS  
or PDC time, you must switch off VPS or PDC.  
TIMER PROGRAMMING  
VPS  
DATEPROG. START END  
LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
15 xxx  
15:36 15:50  
-
*
ONCE  
Programming a recording  
(with ’SHOWVIEW’)  
All the important information needed for a programming is  
contained in the SHOWVIEW-programming number.  
Store:  
press OK  
DIf SHOWVIEW does not recognise the TV channel,  
P??’ will appear on the TV screen. Instead of  
P??’, you can select the programme number  
(programme name) you want with the number  
buttons 0-9 .  
a Press the TIMER s button on the remote control.  
b Select the line ’ShowView’ with the menu buttons  
B or A and confirm with the C button.  
DIf ’Code error’ appears on the TV screen, this  
means you entered an incorrect SHOWVIEW-code  
number or the incorrect date. Correct your  
instructions or end with the TIMER s button.  
DIf ’Daily error’ appears on the TV screen, the  
date was incorrectly entered.  
DUnder ’VPS/PDC’, use the B or A button to  
switch ’VPS or PDC’ on or off.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUnder ’LP’, use the B or A button to select the c Press the C button.  
recording speed ’SP’ or ’LP’.  
DThe TIMER lamp on the front of the set will light up  
when one or more of the TIMER blocks are  
occupied.  
TIMER PROGRAMMING  
VPS  
DATEPROG. START END  
LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
15 xxx  
15:36 15:50  
-
*
ONCE  
DWhen you are recording, the red recording light at  
the front of the TV-VIDEO Combi will be alight.  
DIf the end of the cassette is reached during a  
recording, the TV-VIDEO Combi will automatically  
eject the cassette.  
Store:  
press OK  
DIf you forgot to insert cassette, ’No cassette’  
d Select the entry field with the D or C button.  
will appear.  
e Enter information with the menu buttons B or A or  
DIf you have inserted a cassette with erase protection  
when you want to start a recording, the cassette will  
be ejected.  
with the digit buttons 0-9 .  
DUnder ’REP.’, use the B or A button to select  
daily or weekly programming.  
f Press the OK button.  
g Confirm the message on the screen with the OK button.  
A TIMER recording can only start, if the set is not used for  
other video recorder functions (e.g. playback).  
ONCE: Recording only once.  
Mo-Fr: Recording from Monday to Friday.  
Mo-Su: Recording from Monday to Sunday.  
WEEKL: Recording every week on the same day.  
h To end, press the TIMER s button.  
DUnder ’VPS/PDC’, use the B or A button to  
switch ’VPS or PDC’ on or off.  
DUnder ’LP’, use the B or A button to select the  
Programming a recording  
(without ’SHOWVIEW’)  
recording speed ’SP’ or ’LP’.  
f Press the OK button.  
g Confirm the message on the screen with the OK button.  
A TIMER recording can only start, if the set is not used for  
other video recorder functions (e.g. playback).  
a Press the TIMER s button on the remote control.  
b Select the line ’TIMER PROGRAMMING’ with the  
menu buttons B or A and confirm with the  
C
button.  
h If you have confirmed with the OK button, exit the menu  
with the TIMER s button.  
E The programming information has been stored in a TIMER  
TIMER PROGRAMMING  
VPS  
block.  
DATEPROG. START END  
LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
i Make sure that the cassette you have put in can be  
--  
--  
--:-- --:---  
-
-----  
recorded on.  
Exit:  
press TIMER  
Start:  
press  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUnder ’REP.’, use the B or A button to select  
daily or weekly programming.  
Programming a recording with TELETEXT  
ONCE: Recording only once.  
With this function programming a recording will be  
considerably easier. In TELETEXT you select the TV  
programme you want to record. All the required information  
for recording will be transferred and stored in a TIMER block.  
You can find more information on TELETEXT in the chapter ’TV  
SET FUNCTIONS’.  
Mo-Fr: Recording from Monday to Friday.  
Mo-Su: Recording from Monday to Sunday.  
WEEKL: Recording every week on the same day.  
DUnder ’VPS/PDC’ switch ’VPS/PDC’ on or off with  
the B or A button.  
a Select the TV channel you want to record from.  
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO  
Combi will now show TELETEXT for the TV channel you  
have selected.  
DUnder ’LP’ select the recording speed ’SP’ or ’LP’  
with the B or A button.  
h When all information is correct, press OK .  
i Confirm the message on the screen with OK .  
A Timer recording can only start, if the set is not being  
used for other video recorder functions (e.g. playback).  
c With the number buttons 0-9 select the TELETEXT  
programme guide page. This page can be stored as the  
preferred page (see paragraph ’How to read TELETEXT’).  
DThe programming information has been stored in a  
d Press TIMER s . ’PLEASE WAIT...’ will briefly  
appear at the bottom of the screen.  
TIMER block.  
j Exit the menu with the TIMER s button.  
Next, a highlighted title line will appear.  
k Make sure that the cassette you have put in can be  
DIf ’NO TIMER INFORMATION ON THIS  
PAGE’ appears, TELETEXT programming cannot be  
used for the programme you have selected. In this  
case, you should programme the recording as  
described in the paragraph ’programming a  
recording’.  
recorded on.  
Automatic recording from a satellite  
receiver (SAT RECORDING)  
e A cursor (h) will appear at the first programme line. Use  
the B and A buttons to move the cursor (h) to the TV  
programme you want to record.  
You can use this function if you own a satellite receiver that  
can control other machines via a scart cable and a  
programming function.  
DIf you want to cancel this function, press  
a Press TIMER s on the remote control.  
TELETEXT e .  
b Select the line ’TIMER PROGRAMMING’ with the  
f Press OK . The timer menu will appear. The required  
programming information has been stored in a TIMER  
block. Please check the information.  
B or A button and confirm with C .  
TIMER PROGRAMMING  
VPS  
DATEPROG. START END  
LP PDC REP.  
TIMER PROGRAMMING  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
VPS  
DATEPROG. START END  
LP PDC REP.  
--  
--  
--:-- --:---  
-
-----  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
15 xxx  
15:36 15:50  
-
*
ONCE  
Exit:  
press TIMER  
Start:  
press  
Store:  
press OK  
g For changing the timer information, select the entry field  
with the D or C button. Change the information with  
the B or A button or with the number buttons 0-9 .  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
c Press C .  
DEach time you programme a recording on the  
satellite receiver, you must prepare your TV-VIDEO  
Combi for recording. Each time you prepare your  
TV-VIDEO Combi for a satellite recording a  
TIMER-block will be reserved and the TIMER light at  
the front will blink.  
TIMER PROGRAMMING  
VPS  
DATEPROG. START END  
LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
15 xxx  
15:36 15:50  
-
*
ONCE  
DIf the TIMER light does not blink, you have not set  
the clock or all TIMER-blocks have been used up.  
Please read the paragraph ’Setting the time and  
date’ or ’How to clear a programmed recording  
(TIMER)’.  
Store:  
press OK  
DIf you want to cancel the programmed SAT  
recording, follow the procedure described in the  
paragraph ’How to clear a TIMER’.  
d Select the entry field ’PROG.’ with the D or  
C
button. Select ’Record prepared’ with the B or  
A button.  
e Confirm with the OK button.  
Your TV-VIDEO Combi is now prepared for recording. The  
start and end of the recording is controlled via the scart  
cable.  
How to check or change a TIMER  
a Press the TIMER s button on the remote control.  
f To end, press the TIMER s button.  
g Place a cassette in the machine.  
E If you have not connected the satellite receiver yet, use a  
scart cable to connect scart socket EXT. 1 on the  
TV-VIDEO Combi to the corresponding scart socket on  
the satellite receiver.  
b Select the line ’TIMER PROGRAMMING’ with the  
menu buttons B or A and confirm with the  
C
button.  
c Select the TIMER you want to check or change with the  
B or A button and confirm with the OK button.  
d Select the entry field with the D or C button.  
h Programme the satellite receiver with the required  
information (programme number on the SAT receiver,  
start time, end time).  
e Change any information with the B or A button or  
with the 0-9 buttons.  
DUnder ’LP’, use the B or A button to select the  
DThe information on how to programme your satellite  
receiver can be found in the instruction manual for  
your satellite receiver.  
recording speed ’SP’ or ’LP’.  
f Confirm with the OK button.  
g To end, press the TIMER s button.  
Activating a recording from the SAT  
receiver with OTSR (OTSR = One Touch Sat  
Recording)  
h Make sure that the cassette you have put in can be  
recorded on.  
In the previous paragraph we described how to prepare the  
TV-VIDEO Combi for recording from the SAT receiver by  
means of the menu (step a through f ). OTSR will allow  
you to record a SAT programme fast and easy with just one  
button press.  
How to clear a TIMER  
a Press the TIMER s button on the remote control.  
b Select the line ’TIMER PROGRAMMING’ with the  
menu buttons B or A and confirm with the  
C
a Press the Sr/q buttons at the same time until the  
timer light on your TV-VIDEO Combi starts blinking. It will  
blink three times and will then stay alight.  
button.  
c Select the TIMER you want to clear with the menu  
buttons B or A .  
Your TV-VIDEO Combi is now prepared for recording. The  
start and end of the recording is controlled via the scart  
cable.  
d Press the CLEAR button.  
e Switch off with the TIMER s button.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. ADDITIONAL FUNCTIONS  
Changing the TV system  
Parental control  
If you play back recordings made on a different kind of tape  
(for example, NTSC standard), the automatic TV system  
switch-over may lead to colour interferences. You can switch  
off the ’automatic TV system switch-over’ as follows.  
This function will prevent unauthorised use of your TV-VIDEO  
Combi. All button-functions will be locked.  
DYou can make programmed recordings while the parental  
control is on.  
a Press the MENU button. The main menu appears.  
a Press the MENU button. The main menu will appear.  
b Select the line ’Tape’ with the B or A button and  
b Select the line ’Setup’ with the B or A button and  
confirm with the C button.  
confirm with the C button.  
TAPE  
SETUP  
Tape speed  
Tape counter  
Repeat play  
Video system  
Jitter  
SP  
LEFT  
OFF  
Parental control  
OFF  
MAX  
NORMAL  
ON  
AUTO  
(,,,,=,,,,$  
(,,,,=,,,,$  
Display  
Format 16:9  
Speakers  
Tracking  
Cleaning  
Sound only  
VCR 1/2  
ON  
VCR  
1
Exit:  
press MENU  
Exit:  
press MENU  
c In the line ’Video system’ select the required TV  
c In the line ’Parental control’ select ’ON’ with  
system with the menu buttons D or C .  
the D or C button.  
d Confirm with the OK button.  
d Confirm with the OK button.  
e To end, press the MENU button.  
e To end, press the MENU button.  
Keep the remote control in a safe place.  
f Switch off the machine with the STANDBY m button.  
DIf you want to switch off parental control, select  
OFF’ in line ’Parental control’.  
DIf a button is pressed with activated parental  
control, ’Parental Control active’ will  
appear.  
DIf you have activated parental control, you can only  
operate the TV-VIDEO Combi with the remote  
control.  
DIf you want to eject a cassette with activated  
parental control, press the STOP h button several  
seconds.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the On-screen display (OSD) on  
or off  
Switching to 16:9 wide screen picture  
If you are using a cassette with 16:9 wide screen recordings,  
you can switch this function ’ON’. The TV-VIDEO Combi will  
now automatically switch to wide screen.  
You can switch the On Screen Display of the current operating  
information on or off.  
a Press the MENU button. The main menu appears.  
a Press the MENU button. The main menu appears.  
b Select the line ’Setup’ with the B or A button and  
b Select the line ’Setup’ with the menu buttons B or  
confirm with the C button.  
A and confirm with the C button.  
SETUP  
SETUP  
Parental control  
OFF  
MAX  
NORMAL  
ON  
Parental control  
OFF  
MAX  
NORMAL  
ON  
Display  
Display  
Format 16:9  
Speakers  
Format 16:9  
Speakers  
Sound only  
VCR 1/2  
ON  
Sound only  
VCR 1/2  
ON  
VCR  
1
VCR  
1
Exit:  
press MENU  
Exit:  
press MENU  
c Select the line ’Format 16:9’ with the A or  
B
c Select the line ’Display’ with the menu buttons  
B
button.  
or A .  
d Select one of the possibilities with the C or D button.  
NORMAL: Normal size picture.  
d Select one of the options indicated with the menu buttons  
C or D .  
EXTEND.: Extended size picture.  
COMPR.: 16:9 format picture.  
MAX: The OSD appears for a few seconds each time an  
operating mode is selected and then disappears.  
MIN: The OSD is reduced to a minimum.  
PROGR.: The programme number is always shown.  
COUNTER: The tape position is always shown.  
DWhen you watch TV you can select between  
EXTEND.’ and ’NORMAL’.  
e Confirm with the OK button.  
e Confirm with the OK button.  
f To end, press the MENU button.  
f To end, press the MENU button.  
DWith the OK button you can superimpose the On  
Screen Display of current operating mode on the TV  
screen.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the internal speakers on or off  
Switching the remote control command  
If you want to connect a HiFi-stereo set or a ’Dolby Pro Logic’  
decoder to the socket AUDIO OUT L/R (audio output left/right)  
and switch off the internal speakers, proceed as follows:  
If you have two machines with the same remote control  
command, you can change the remote control command of the  
handset and the remote control command of your TV-VIDEO  
Combi.  
a Press the MENU button. The main menu will appear.  
a Press the MENU button. The main menu appears.  
b Select the line ’Setup’ with the B or A button and  
confirm with the C button.  
b Select the line ’Setup’ with the menu buttons B or  
A and confirm with the menu button C .  
SETUP  
SETUP  
Parental control  
OFF  
MAX  
NORMAL  
ON  
Display  
Parental control  
OFF  
MAX  
NORMAL  
ON  
Format 16:9  
Speakers  
Display  
Format 16:9  
Speakers  
Sound only  
VCR 1/2  
ON  
VCR  
1
Sound only  
VCR 1/2  
ON  
VCR  
1
Exit:  
press MENU  
Exit:  
press MENU  
c Select the line ’Speakers’ with the B or A .  
c Select the line ’VCR 1/2’ with the menu buttons  
B
or A .  
d In the line ’Speakers’ select ’OFF’ with the D or  
C button.  
d Select ’VCR 1’ or ’VCR 2’ with the menu buttons  
D or C .  
e Confirm with the OK button.  
e Confirm with the OK button.  
f To end, press the MENU button.  
DIf you want to switch the speakers on again, select  
f On the remote control, press the STOP h button and the  
digit button 2 at the same time to switch the remote  
control to ’VCR 2’.  
ON’ in line ’Speakers’.  
DIf you want to switch back to ’VCR 1, press the  
STOP h button and the digit button 1 at the same  
time.  
g Confirm with the STOP h button.  
h To end, press the MENU button.  
DAfter you changed the batteries in the remote  
control, it will switch back to ’VCR 1’.  
DIf e.g.: ’VCR 1’ appears on the TV screen after  
pressing a button for a few seconds, you must  
switch the remote control to ’VCR 2’.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continuous playback  
Sound playback without picture  
You can automatically play a cassette again and again. When  
the end of the tape or the recording has been reached, it will  
rewind and start again.  
To play sound only, you can switch off the picture. You will  
hear sound only.  
a Press the MENU button. The main menu appears.  
a Press the MENU button. The main menu appears.  
b Select the line ’Setup’ with the B or A button and  
b Select the line ’Tape’ with the menu buttons B or  
confirm with the C button.  
A . Confirm with the menu button C .  
SETUP  
TAPE  
Tape speed  
Tape counter  
Repeat play  
Video system  
Jitter  
SP  
Parental control  
OFF  
MAX  
NORMAL  
ON  
LEFT  
Display  
OFF  
Format 16:9  
Speakers  
AUTO  
(,,,,=,,,,$  
(,,,,=,,,,$  
Sound only  
VCR 1/2  
ON  
VCR  
Tracking  
Cleaning  
1
Exit:  
press MENU  
Exit:  
press MENU  
c Select the line ’Sound only’ with the B or  
A
c Select the line ’Repeat play’ with the menu buttons  
button.  
B or A .  
d Switch the function on or off with the D or C button.  
e Confirm with the OK button.  
d Select ’ON’ with the menu buttons D or C . If you  
select ’OFF’, the function will be switched off.  
e Confirm with the OK button.  
f Press the MENU button.  
f Press the MENU button.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switch off function (SLEEP TIMER)  
You can programme your set to switch off after a  
predetermined period.  
a Press the TIMER s button on the remote control.  
b Select line ’Sleep timer’ with the B or  
A
button and confirm with the C button.  
c Determine the time left until switch off in 15 minutes  
intervals using the B or A button.  
DYou can switch the function off with the CLEAR  
button on the remote control.  
d Confirm with the OK button.  
e To end, press the TIMER s button.  
Switch on function (WAKE-UP TIMER)  
You can programme your set to switch on at a predetermined  
time.  
a Press the TIMER s button on the remote control.  
b Select line ’Wake-up timer’ with the B or  
A
button and confirm with the C button.  
c Select the entry field with the D or C button.  
d Enter the information with the B or A button or with  
the number buttons 0-9 .  
e In the line ’ON’, switch the function on or off.  
f Press the OK button.  
g To end, press the TIMER s button.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Before you call an engineer  
If, contrary to expectation, you have any problems using this  
TV-VIDEO Combi, it may be caused by one of the reasons  
mentioned below. You can also call the customer service  
centrein your country.  
You will find the phone number in the enclosed guarantee  
leaflet. Have the model number (MODEL NO) and the  
production number (PROD.NO) of your video recorder ready.  
Programmed recording does not work:  
You have not set the TIMER properly: check the TIMER blocks.  
You have programmed the wrong time or date: check time and  
date.  
You have put in a cassette that cannot be recorded on: undo the  
erase protection on the cassette.  
’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC  
or VPS time exactly to the minute. Have the aerial checked.  
No sound from speakers:  
Technical problem:  
Speakers switched off: To switch on the speakers, turn to  
chapter ’ADDITIONAL FUNCTIONS’, section ’Switching the  
internal speakers on or off’.  
You can reset the settings on your set (careful: all information will  
be deleted): with the video recorder switched on, hold the  
H and the I button until the screen switches off.  
Recording starts as soon as the satellite receiver or second  
video recorder is switched on:  
Your TV-VIDEO Combi does not respond to any button being  
pressed:  
Externally controlled recording switched on: Switch off the  
externally controlled recording.  
There is no power supply: check the power supply  
A programmed recording is currently being made: to cancel the  
programmed recording, press STANDBY m for several seconds.  
Parental control is on: switch the parental control off.  
The TIMER lamp on the front of the set will light up although  
you didn’t have programmed a TIMER block:  
Continuous playback is on: switch the continuous playback off.  
You have accidentally pressed the buttons Sr/qx on the  
front of the set and so activated the Sat recording. Cancel the  
recording as shown in the section ’How to clear a programmed  
recording (TIMER)’.  
Cassette is jammed in the TV-VIDEO Combi:  
Don’t use force. Switch off with the 8 power switch for 30  
seconds, then switch it on again.  
Remote control does not work:  
’Smart Clock’ setting does not work:  
Remote control not pointed toward the TV-VIDEO Combi: point it  
at the TV-VIDEO Combi.  
You have stored a TV channel on programme number ’P01’ that  
does not transmit TELETEXT: On ’P01’ store a TV channel that  
transmits TELETEXT.  
Batteries have run out: change the batteries.  
You have given the wrong remote control command: read  
’Switching remote control command’ in chapter ’Additional  
functions’.  
Poor TELETEXT reception: On ’P01’ store a TV channel with  
good TELETEXT reception.  
You have not activated the Smart Clock function: Switch the  
function ’ON’.  
No picture when you play a cassette:  
There is no recording on the cassette: change the cassette.  
You hear a very short and soft noise coming from your  
TV-VIDEO Combi at 3:00 at night:  
’Smart Clock’ is checking the time: Switch off the Smart Clock  
function.  
Poor picture quality when you play a cassette:  
The cassette badly worn or of poor quality: use new cassette.  
Tracking is not properly adjusted or the video heads are dirty:  
turn to chapter ’PLAYBACK FUNCTIONS’ and read the section  
’Cleaning the video heads’.  
TELETEXT does not start at page 100:  
You have stored a different preferred page: Store page 100 as  
preferred page.  
Read the section ’Picture interference’.  
You are playing a cassette with a LongPlay recording on it:  
Excellent picture quality is only guarateed with recordings made  
in StandardPlay recording speed.  
The TV-VIDEO Combi will not record:  
The TV channel you want to record is not stored or you selected  
the wrong programme number: check TV channels stored.  
You have loaded a cassette which cannot be recorded on: undo  
the erase protection on the cassette.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical terms used  
Current tape position : The part of the tape currently being  
played.  
External source : A device connected via a socket (for  
example, scart socket) which is transmitting audio/video  
signals to the TV-VIDEO Combi.  
Index marking : A marking which is automatically made on the  
tape at the beginning of every recording. This marking  
(recording ID) can be searched for with the Index search  
function.  
Scart cable : Also known as a Euro-AV cable. This standard  
cable is an easy method of connecting various TV, audio and  
video devices, such as a HIFI and Dolby Surround set, video  
recorder, DVD player, SAT receiver, decoder, computer and  
similar devices. Other signals in addition to audio and video  
signals can be transmitted on it.  
TV system : There are various systems for transmitting  
television signals, for example, PAL, SECAM, PAL BG, SECAM  
DK, SECAM L/L, NTSC etc. The system used by your television  
depends on which country you are in.  
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.  
OTR : One touch recording. This function enables you to select  
the switch-off time in intervals of 15 minutes.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Microphone LX 20S User Manual
Pelco TV Mount LB1000DC User Manual
Philips Bottle Warmer SCF600 22 User Manual
Philips Portable DVD Player PD9012 37 User Manual
Philips Stereo System SWA3302S User Manual
Philips TV VCR Combo 14PV374 07 User Manual
Philips Water Dispenser WP3890 User Manual
Polaroid TV Receiver PTV 701 User Manual
ProForm Treadmill 831246550 User Manual
Proxim Network Router AP 2500 User Manual