Rear-projection
HDTV Monitor
55PW9383
60PW9383
Product Highlights
• High-definition display—1080i/480p
• Philips HD Optics
™
• Auto IntelliSense Focus
• HD DVI and Component Inputs
™
• Active Control
• Eye Fidelity—selectable progressive or
interlaced scan
™
• APAC (Automatic Phosphor Aging
Compensation)
Features
• Multipoint digital convergence
• Protective screen filter
®
• Virtual Dolby Surround—30-watt RMS
• 3-D Y/C comb filter
• Double-window, two-tuner
picture-in-picture
• Slim, upscale styling
• Home-cinema universal remote
with backlighting
3135 035 21401
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
B. Objects have fallen, or liquid has been spilled into the
appliance; or
7. Do not block any of the ventilation openings. Install in
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
17. Tilt/Stability - All televisions must comply with recommend-
ed international global safety standards for tilt and stability
properties of its cabinet design.
9. Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong
are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
11. Only use attachments/accessories specified by the manu-
facturer.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the ap-
paratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from
tip-over.
19. Power Lines - An outdoor antenna should be located away
from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental con-
siderations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclo-
sure through openings.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
Rev. 8/13/01
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Selecting the Stereo/Mono Sound Mode . . . . . . . . . . . . . .38
INTRODUCTION
Selecting the SAP (Second Audio Program) Feature . . . . .39
Using the Bass Boost Control . . . . . . . . . . . . . . . . . . . . . .40
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
FEATURES
The Timer
CONNECTING ACCESSORY DEVICES
TO YOUR TV
Panel Overview: Standard Inputs and Outputs . . . . . . . . . . .6
Panel Overview: High-definition Inputs . . . . . . . . . . . . . . . .7
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . . .9
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Displaying the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting the Timer’s Start Time and Stop Time . . . . . . . . .43
Selecting the Timer’s Channel . . . . . . . . . . . . . . . . . . . . .44
Setting the Timer’s Activate Control . . . . . . . . . . . . . . . .45
AutoLock™
Connecting and Using an Audio Hi-fi System
with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Understanding AutoLock™ . . . . . . . . . . . . . . . . . . . . . . .46
Setting up the AutoLock™ Access Code . . . . . . . . . . . . .47
Using AutoLock™ to Block Channels . . . . . . . . . . . . . . .48
Using AutoLock™ to Block by Movie Rating . . . . . . . . .49
Using AutoLock™ to Block by TV Rating . . . . . . . . . . .50
Making Optional Surround-sound Connections . . . . . . . . .11
Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .12
Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .13
Connecting a DVD Player with Progressive-scan
Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Turning the AutoLock™ Blocking Control
on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Connecting an HD Receiver to the
HD INPUT-AV 4 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using AutoLock™ to Block Unrated Broadcasts . . . . . . .52
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . .16
Using AutoLock™ to Block Broadcasts That
Have No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Connecting and Using Headphones
with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Reviewing Your Current AutoLock™ Settings . . . . . . . . .54
Using the Closed Captioning Control . . . . . . . . . . . . . . . . .55
Using the Picture-format Control . . . . . . . . . . . . . . . . .56–57
Using Active Control™ . . . . . . . . . . . . . . . . . . . . . . . . . . .58
ppendixes
POWER
USING THE REMOTE CONTROL
Programming the TV Remote to Work
with Accessory Devices . . . . . . . . . . . . . . . . . . . . .18
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
DN
UP
SOUND
PICTURE
STATUS/
EXIT
MENU/
SELECT
Using the Code-entry Method to Program Your
TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
APPENDIXES
Appendix A: Compatibility Information
for the TV’s High-definition Inputs . . . . . . . . . .59
ABC
Using the Search Method to Program Your
TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Direct-entry Codes for A/V Accessory Devices . . . . . .21–22
Using the TV Remote with Accessory Devices . . . . . . . . .23
Using the AV and Source Select Buttons . . . . . . . . . . . . . .24
Using AutoSound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using AutoPicture™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Using AutoSurf™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Using Program List and Alternate Channel (A/CH) . . . . . .28
Using the Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . .29
Appendix B: Model Specifications . . . . . . . . . . . . . . . . . . .60
Appendix C: Setting Color Space for HD INPUT-AV 4 . . . .61
GENERAL INFORMATION
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63–64
Glossary of Television Terms . . . . . . . . . . . . . . . . . . . . . . .65
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . .67–68
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
USING THE ON-SCREEN SUBMENUS
PICTURE
Adjusting the Picture Controls . . . . . . . . . . . . . . .30
Setting the Eye Fidelity Control . . . . . . . . . . . . . . . . . . . . .31
Setting the Dynamic Contrast Control . . . . . . . . . . . . . . . .32
QUICK USE AND SETUP GUIDE
Refer to the simple Quick Use and Setup Guide (supplied with your
TV) for details on the following:
Adjusting the Manual Converge Controls:
Converge Red/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
•
•
•
•
Basic TV connections
Television and remote-control operation
On-screen menu controls
Installation features.
Adjusting the Manual Converge Controls:
Multipoint Red/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
SOUND
Adjusting the Treble, Bass, and
Balance Controls . . . . . . . . . . . . . . . . . . . . . . . .35
Items Included withThisTV
As you unpack your TV, please note that this Directions for Use manual
contains safety-tip information, the locations of factory-service centers, a
warranty registration card, remote control, and batteries for the remote
control. Please take a few minutes to complete your registration card. The
serial number for the TV is on the rear of the set. Refer to page 62 for
cleaning and care instructions.
Using the AVL (Audio Volume Leveler) Control . . . . . . . .36
Selecting the Surround-sound Modes . . . . . . . . . . . . . . . . .37
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Home-cinema universal remote control operates your TV set and
Philips HD Optics gives extreme resolution HD with cutting-edge
processing and display technology. Includes a Philips wideband
video amplifier, microphosphor CRTs, hybrid projection lenses,
first-surface mirror, and fine-pitched lenticular screen.
other devices that work by infrared remote control, such as VCRs,
cable converter boxes, satellite receivers, and others. Note: You may
need to program the remote to work with devices other than the TV.
See pages 18–23.
Auto IntelliSense™ Focus automatically adjusts picture conver-
gence at the push of a button. After reviewing a special test pat-
tern, optical sensors send position information to the controller,
which then corrects the pictures. Auto IntelliSense™ Focus
responds to the natural and man-made magnetic field conditions
where the TV is located, so you will always enjoy the best possible
picture.
Hi-fi stereo system, including a built-in audio amplifier and a twin
speaker system with 2-inch tweeters and 5-inch woofers. The sys-
tem enables you to hear stereo sound or Second Audio Program
(SAP) bilingual broadcasts when they are available.
Audio/video jacks allow direct connections with VCRs and other
accessories for quality TV picture and sound playback. Component
video input jacks are provided for high-fidelity color and picture
resolution when using digital video source material, such as a DVD.
Automatic Phosphor Aging Compensation (APAC) works with
the set’s Automatic Format feature to prevent screen burn left by
nonmoving images. Periodically, APAC automatically shifts your
television picture in very small increments, but in increments large
enough to blur image retention. APAC is like a screen saver for
your TV.
Audio Volume Leveler (AVL) control keeps the TV’s sound at an
even level. Peaks and valleys that occur during program changes or
commercial breaks are reduced, making for a more consistent, com-
fortable sound.
Active Control™ continuously measures and corrects all incoming
signals to provide the best picture settings. This feature provides a
sharp and virtually noise-free picture any time, from any NTSC
source. NTSC is the National Television Standards Committee for-
mat devised in the 1940s for TV broadcast analog video signals
(525 lines: 30 Hz).
AutoChron™ automatically sets the right time of day and main-
tains it with digital precision through brownouts, power failures,
and even Daylight Savings Time adjustments.
AutoLock™ protects young children from objectionable program-
ming with V-chip technology.
AutoSound™ allows you to select from three factory-set controls
and a personal control that you set according to your own prefer-
ences through the on-screen Sound submenu. The three factory-set
controls—Voice, Music, and Theatre—enable you to tailor the TV
sound to enhance the particular programming you are watching.
Eye Fidelity gives you a choice between two different picture-
scanning techniques—progressive and interlaced. Progressive scan
doubles the number of visible picture lines per field by displaying
all picture frame lines at once, eliminating line flicker. The inter-
laced mode provides for a double vertical display (interlaced) of
progressive scan, which reduces annoying motion artifacts. The
Interlaced mode also helps smooth out jagged lines sometimes
seen on curved and angled surfaces.
AutoSurf™ allows you to easily switch among only the channels
that are of interest to you. You can program up to 10 channels into
the TV’s AutoSurf™ memory through the on-screen display.
Channel Edit allows you to add or remove channels from the list of
channels stored in the TV’s memory. Channel Edit makes it easy to
limit or expand the number of channels that are available to you
when you press the CH +/– buttons on your remote control.
Protective screen filter helps prevent accidental damage to the
delicate front lenticular screen. This filter has been specifically for-
mulated by Philips for HD displays to give the best possible pic-
ture and still protect your investment.
Closed Captioning allows you to read TV program dialog or voice
conversations as on-screen text.
HD DVI and Component Inputs—DVI supports High-definition
Copy Protected digital video input for connection to compliant set-
top boxes. The HD component connection (Y Pb Pr or RGB +HV0
offers color purity, crisp color detail, and reduced color noise.
Dynamic Contrast helps sharpen the picture quality by making the
contrast between the dark and bright picture areas more noticeable
as the image on screen changes.
3-D Y/C Digital Comb Filter (activated when using the tuner and
composite inputs) processes the video with spatial and temporal
filtering, virtually eliminating cross-color and cross-luminance
interference, improving video resolution. This filter uses extensive
memory to analyze complete video fields, significantly reducing
“dot crawl,” “hanging dots,” and “barber pole artifacts” on the
image.
As an Energy Star® Partner, Philips Consumer Electronics has
determined this product meets the Energy Star® guidelines for
energy efficiency. Energy Star® is a U.S. registered mark. Using
products with the Energy Star® label can save energy. Saving
energy reduces air pollution and lowers utility bills.
*Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Double-window, two-tuner Picture-in-Picture (PIP) allows you
to watch two shows, side by side. No VCR is necessary for tuning
PIP pictures. Your set’s two separate tuners let you select two
shows and display both in windows of equal proportion.
Active Control, APAC, AutoPicture, AutoSound, AutoSurf, Incredible
Surround, and IntelliSense are trademarks of Philips Consumer Electronics.
Copyright 2003 Philips Consumer Electronics. All rights reserved.
Virtual Dolby* Surround (referred to as Dolby Virtual in the
on-screen submenu) uses two speakers to simulate the surround
effect produced by a multichannel system.
End-of-life Disposal
Incredible Surround™ enhances stereo programs by making the
sound broader and fuller.
Your new projection television and its packaging contain materials
that can be recycled and reused. Specialized companies can recy-
cle your product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed. The bat-
teries used by your product should not be thrown away when
depleted but should be handed in and disposed of as small chemi-
cal waste. Please find out about the local regulations concerning
how to dispose of your old television, batteries, and packaging
Center channel input, which has standard clip-on style speaker
connectors, simplifies the connection of surround-sound equipment
for optimal home-theater enjoyment. Since it contains the dialog
information, the center channel is vitally important to the overall
performance of any large screen in a home-theater system.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
PANEL OVERVIEW: STANDARD INPUTS AND OUTPUTS
ou can connect a wide range of video and
Yaudio devices to your TV, in various ways.
This page and the next one provide an overview
of signal compatibilities and the types of
devices you can connect to the jacks.
Connection examples follow on subsequent
pages. See pages 1 and 2 of the Quick Use and
Setup Guide that came with your set for exam-
ples of basic connections. You may also want to
refer to the user instructions that came with
each particular device for information on con-
nections.
7
ANTENNA IN 75Ω
AMP SWITCH
EXT
1
Rear of TV
INT
_
+
HD INPUT-AV 5
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV 4
G/Y
4
6
4
R/Pr
NPUT-AV 1
OUTPUT
INPUT-AV 2
SUBWOOFER
Y
B/Pb
VIDEO
L
VIDEO
L
7
S-VIDEO
S-VIDEO
WhatYou Can Connect to the
Standard Panel Jacks
L
Pb
Pr
L
V
L
L
SYNC
AUDIO
H
AUDIO
AUDIO
AUDIO
R
R
R
R
ANTENNA IN 75Ω jack—use to con-
nect radio-frequency (RF) signals from
VHF/UHF antennas or a cable system.
These are 480i signals.
1
2
3
3
2
5
5
YPbPr (component video input [CVI]
jacks)—compatible with 480i signals
only. Use to connect accessories having
component video outputs, such as DVD
players, laser-disc players, video-game
players, satellite receivers, or other
devices. Use the INPUT-AV 1 L(eft) and
R(ight) AUDIO jacks for sound connec-
tions. CVI is not accessible in the PIP
window.
Summary of signal compatibilities
Compatible output signal
from an external source
or device
TV Input
ANTENNA IN 75Ω, INPUT AV-1,YPbPr
(component video inputs [CVI]),
480i (480 lines, interlaced)
INPUT AV-2, and side jack panel (AV3)
S-VIDEO (super video) jacks—com-
patible with 480i signals only. Use to
connect accessories having Super VHS
(S-VHS) outputs, such as VCRs, DVD
players, laser-disc players, video-game
players, satellite receivers, or other
devices.
HELPFUL HINTS
3
Signal sources connected to the
Side Jack Panel
HD INPUT-AV 4 or HD INPUT-AV 5 jacks
will provide the best picture (see page 7 for
descriptions of those inputs). Among the
standard (480i-compatible) inputs—
ANTENNA IN 75Ω, INPUT AV-1, CVI
[labeled Y, Pb, Pr], INPUT AV-2, and the
side jack panel [AV3])—the best picture
will come from signal sources connected to
the CVI jacks. S-Video will provide the
3
4
G
VIDEO (composite) jacks (INPUT-AV 1,
INPUT-AV 2, and TV’s side jack panel
[AV3])—compatible with 480i signals
only. Use to connect accessories having
composite video outputs, such as VCRs,
video-game players, or other devices.
4
5
8
AUDIO inputs (INPUT-AV 1,
INPUT-AV 2, and TV’s side jack panel
[AV3])—use to connect from the audio
output jacks on VCRs, DVDs, or other
accessories.
5
c
CHECK IT OUT
NOTE:The
The side jack-panel inputs (recognized by the
TV as AV3) are convenient for connecting a
camcorder. See page 16.
OUTPUT (VIDEO/AUDIO)—video is
compatible with 480i signals only. Use to
connect to a VCR to record programs
from the TV. Or use the AUDIO outputs
to connect to an audio hi-fi system.
TV recognizes
the side jack
panel as AV3.
6
AMP SWITCH, CENTER
CHANNEL AMP INPUT, and
7
SUBWOOFER Output—use to make
optional surround-sound connections
(see page 11).
n Headphone jack—use to connect
headphones for personal listening.
8
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
PANEL OVERVIEW: HIGH-DEFINITION INPUTS
WhatYou Can Connect to the
High-definition Input Jacks
ANTENNA IN 75Ω
AMP SWITCH
EXT
Rear of TV
INT
HD INPUT-AV 4—use to connect dig-
ital equipment with a 1080i or a 480p
signal output, such as HD receivers
(1080i or 480p) or DVD players with
progressive-scan capability (480p).You
can connect equipment with YPbPr
component video or RGB outputs to
the HD INPUT-AV 4 jacks. H and V
sync connections may or may not be
required for RGB connections. (See
page 59.) Dedicated audio input jacks
are located with the HD INPUT-AV 4
video jacks.
2
1
1
_
+
HD INPUT-AV 5
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV 4
G/Y
R/Pr
INPUT-AV 1
OUTPUT
INPUT-AV 2
VIDEO
SUBWOOFER
Y
B/Pb
VIDEO
S-VIDEO
S-VIDEO
L
Pb
Pr
L
V
L
L
L
L
SYNC
H
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
R
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV 4.
Summary of signal compatibilities
HD INPUT-AV 5—use to connect digi-
tal equipment with DVI (digital video
interface) 1080i or 480p output. DVI is
a specific digital input allowing encrypt-
ed transmission of uncompressed HD
content. DVI includes HDCP (high-
bandwidth digital content protection),
which is supported by Hollywood,
satellite providers, and most of the con-
sumer electronics industry. DVI is gain-
ing momentum and quickly becoming
an industry standard for the consumer to
view high-definition material while keep-
ing content protected.
Compatible output signal
from an external source
or device
2
TV Input
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)
HD INPUT-AV 4
HD INPUT-AV 5
Digital video interface (DVI) with
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)
HELPFUL HINT
Because DVI is such new technology, the elec-
tronics industry is still working toward a deci-
sion on one standard. Philips testing has deter-
mined that compatibility issues exist with
respect to a limited number of high-definition
receivers when they are connected to the DVI
input on this television. If you should experi-
ence difficulties, please contact our Customer
Care Center at 1-800-531-0039.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV5.
HELPFUL HINTS
• The TV’s default color-space setting for HD
INPUT-AV 4 is YPbPr. If the picture looks
grossly incorrect, try changing the color-space
setting on either the digital equipment or the
TV. For more information on setting the color
space on the digital equipment, see the equip-
ment’s directions-for-use manual. To set the
TV’s color space, see page 61 in this manual.
• This television is designed to be compatible
with high-definition signal standards 1080i
and 480p as specified by the Electronic
Industries Association standard EIA770.3.
Because output standards may vary by manu-
facturer, you may encounter some digital
equipment that will not properly display pic-
tures on the TV.
• The PIP (Picture-in-picture) feature allows you
to tune to a program in the main window and
scan other channels in the PIP window. From a
single antenna or cable input, signals are separat-
ed into two signals within the television. The
AV1, AV2, and AV3 inputs are also available as
PIP sources.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING A VCR
he TV’s audio/video (AV) input jacks provide
Tfor direct picture and sound connections
between the TV and accessory devices such as
VCRs, DVD players, and others that have AV out-
put jacks.
ANTENNA IN 75Ω
AMP SWITCH
EXT
Rear of TV
INT
2
_
+
HD INPUT-AV
5
4
This example, which uses the INPUT-AV 1 jacks,
shows you one way to connect a VCR to your TV.
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV
G/Y
Refer to the directions-for-use manual for your
VCR for further information on connections.
3
R/Pr
INPUT-AV
1
OU
INPUT-AV
VIDEO
2
SUBWOOFER
4
Y
B/Pb
VIDEO
S-VIDEO
To make the connections shown in this example,
you will need:
• one coaxial cable (75Ω)
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
Coaxial Cable
Lead-in from
CableTV Company
orVHF/UHF Antenna
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
H
R
• one cable for a video connection (standard
RCA connector)
Rear ofVCR*
1
• two cables for audio connections (standard
RCA connectors) (only one cable is needed for
a nonstereo VCR).
AUDIO
L
ANT
IN
OUT
IN
R
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
VIDEO
OUT
IN CH3 CH4
OUT
Customer Care Center at 1-800-531-0039.
* (Example: PhilipsVCR
model VR674CAT)
Connect a cable TV or antenna signal to
the ANT IN jack on the rear of the VCR.
1
AV1
HELPFUL HINTS
Connect from the OUT jack on the rear
of the VCR to the ANTENNA IN 75Ω
jack on the rear of the TV.
• Stereo sound will pass from the ANT
OUT jack on the VCR to the ANTENNA
IN 75Ω jack on the TV only when the
VCR is in TV mode. This is the mode
that allows the TV to use its channel
selector.
2
Connect the VIDEO OUT jack on the
rear of the VCR to the INPUT AV1
VIDEO jack on the rear of the TV.
3
4
Connect the audio output R(ight) and
L(eft) jacks on the rear of the VCR to the
INPUT-AV 1 AUDIO jacks on the rear of
the TV.
• To simplify making connections, audio
and video cables often have color-coded
plugs. The jacks on your TV are likewise
color coded to match the plugs. The cod-
ing is as follows:
POWER
NOTE: If the VCR is a mono (nonstereo)
unit, connect only the left audio cable,
which usually has a white connector.
—Yellow for video (composite)
—Red for the right audio channel
—White for the left audio channel
TV
VCR
UP
ACC
ACTIVE
SWAP
PIP CH
CONTROL FREEZE
DN
Press the AV button on the remote con-
PICTURE
SOUND
NOTE: If your VCR is mono (non-
stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONO for the signal source to which
you’ve connected the VCR (INPUT-AV 1,
INPUT-AV2, or the side panel inputs
[AV3]). Otherwise, you will receive
sound from only one of the TV’s speakers.
See page 38.
trol as many times as necessary to select
the AV1 source for the viewing of materi-
als from your VCR.
5
MENU/
STATUS/
SELECT
EXIT
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
c
CHECK IT OUT
TV/VCR
A/CH
SURF
You can display the AV1, AV2, or AV3 signal
sources in the PIP window. See page 8 of the
Quick Use and Setup Guide for information on
REC •
SLEEP
5
FORMAT
SAP
AV
DOLBY V PROG.LIST
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING A VCR AND CABLE BOX
resented here is a connection example
Pinvolving a VCR and cable box.
ANTENNA IN 75Ω
AMP SWITCH
Rear of TV
3
EXT
INT
Refer to the VCR’s directions-for-use manual
for further information on connections.
_
+
To make the connections in this example, you
will need:
• one, two-way signal splitter
• two coaxial cables (75Ω)
• one cable for a video connection (standard
RCA connector)
• two cables for audio connections (standard
RCA connectors) (only one cable is needed
for connection to a nonstereo VCR).
HD INPUT-AV
5
4
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV
G/Y
5
R/Pr
INPUT-AV
1
OU
INPUT-AV
VIDEO
2
SUBWOOFER
6
Y
B/Pb
VIDEO
S-VIDEO
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
H
R
Rear of VCR*
NOTE: The cables are not supplied with your
TV. You should be able to buy them at most
stores that sell electronics. Or you can call
our Customer Care Center at
4
AUDIO
L
ANT
IN
OUT
IN
1-800-531-0039.
R
VIDEO
OUT
IN CH3 CH4
OUT
Connect a cable TV signal to a two-
way signal splitter.
* (Example: Philips
VCR model
1
Rear of Cable Box
VR674CAT)
Connect one of the two-way signal
splitter outputs to the INPUT on the
cable box.
OUTPUT
2
Two-way
Signal
Splitter
AV1
INPUT
Connect the other two-way signal
splitter output to the ANTENNA IN
75Ω on the rear of the TV.
3
4
5
6
2
Coaxial Cable Lead-in from
Cable TV Company
Connect from the cable box OUTPUT
jack to the ANT IN jack on the rear of
the VCR.
1
or VHF/UHF Antenna
HELPFUL HINTS
• The RF output on a cable box, usually
labeled “OUTPUT,” “OUT,” or “TO TV,”
will not pass a stereo sound signal to the
ANTENNA IN 75Ω jack on the TV. If, how-
ever, your cable box has separate
Connect the VIDEO OUT jack on
the VCR to the INPUT-AV 1 VIDEO
jack on the rear of the TV.
POWER
Connect the AUDIO OUT R(ight)
Audio/Video outputs, using A/V cables to
connect to those outputs and to the A/V
inputs on the TV might pass a stereo sound
signal to the TV. Contact your cable TV
company for more information.
and L(eft) jacks on the VCR to
INPUT-AV 1 AUDIO jacks on the rear
of the TV.
TV
VCR
UP
ACC
ACTIVE
SWAP
PIP CH
CONTROL FREEZE
DN
PICTURE
SOUND
NOTE: If the VCR is a nonstereo unit,
connect only the left audio cable,
which usually has a white connector.
• To simplify making connections, the plugs
on audio and video cables are often color
coded. The jacks on your TV are likewise
color coded to match the plugs.
MENU/
STATUS/
EXIT
SELECT
Press the AV button on the remote
MUTE
control as many times as necessary
to select the AV1 source for the view-
ing of materials from your VCR.
7
VOL
CH
The coding is as follows:
—Yellow for video (composite)
—Red for the right audio channel
—White for the left audio channel
1
4
7
2
5
8
0
3
6
NOTE: If your VCR is mono (nonstereo),
you will connect only one audio cable. You
must ensure that the TV is set to MONO for
the signal source to which you’ve connected
the VCR (INPUT-AV 2, INPUT-AV 1, or the
side panel inputs [AV3]). Otherwise, you will
receive sound from only one of the TV’s
speakers. See page 38.
9
TV/VCR
A/CH
SURF
REC •
SLEEP
7
FORMAT
SAP
AV
DOLBY V PROG.LIST
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING AND USING AN AUDIO HI-FI SYSTEM WITH YOUR TV
ou can use your TV’s AUDIO OUTPUT jacks
Yto connect to an external audio hi-fi system.
Follow the simple steps below.
ANTENNA IN 75Ω
AMP SWITCH
EXT
Rear of TV
INT
To make these connections, you will need two
cables for audio connections (standard RCA).
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
_
+
HD INPUT-AV
5
4
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV
G/Y
R/Pr
INPUT-AV
1
OUTPUT
INPUT-AV
VIDEO
2
SUBWOOFER
Customer Care Center at 1-800-531-0039.
Y
B/Pb
VIDEO
S-VIDEO
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
Connect from the L(eft) and R(ight)
H
R
AUDIO OUTPUT jacks on the rear of the
TV to the L(eft) and R(ight) AUX/TV
INPUT jacks on the rear of the hi-fi system.
1
1
2
UX/TV INPU
L
R
See the section below on using the
AUDIO OUT control.
Rear
of Hi-fi
PHONO INPUT
fter connecting the TV’s AUDIO OUTPUT
Ajacks to the AUDIO INPUT jacks on an
external hi-fi system, set the AUDIO OUT con-
trol in the SOUND submenu to either VARI-
ABLE or FIXED to determine whether you
adjust the volume at the TV or at the external
hi-fi system. To change the volume at the TV
using the TV’s remote control, you must select
VARIABLE. To adjust the volume at the stereo
using the hi-fi’s controls, you must select
FIXED. You can also use the SPEAKERS
control in the SOUND submenu to turn the
TV’s speakers off.
SOUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
30
AVL
INCR SURROUND
.
POWER
SOUND
.
INCR SURROUND
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
HEADPHONE
STEREO
SAP
1
TV
VCR
PIP CH
ACC
ACTIVE
AUDIO OUT
FIXED
SWAP
CONTROL FREEZE
DN
UP
Press the CURSOR RING DOWN
once to highlight SOUND.
5
3
PICT
S
OR
2
7
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
MENU/
SELECT
AUDIO OUT
VARIABLE
STATUS/
EXIT
3
Press the CURSOR RING DOWN
repeatedly until AUDIO OUT is high-
lighted.
SOUND
MUTE
CH
4
HEADPHONE
STEREO
SAP
AUDIO OUT
SPEAKERS
2,4,
1
Press the CURSOR RING LEFT or
RIGHT to set the AUDIO OUT to
either VARIABLE or FIXED.
2
5
8
0
3
6
6
OFF
ON
5
4
If you want to turn the TV’s internal
speakers off, press the CURSOR
RING DOWN repeatedly until
SPEAKERS is highlighted. Then press
the CURSOR RING LEFT or RIGHT
to turn the speakers off.
7
TV/VCR
A/CH
9
OR
SURF
6
SPEAKERS
POSITION
PIP
HELPFUL HINT
The sound outputs from the TV to an exter-
nal hi-fi system are not affected or tailored
by the TREBLE, BASS, BALANCE, AVL,
INCR. SURROUND, and BASS BOOST
controls in the TV’s SOUND submenu.
Press the STATUS/EXIT button to
exit the menu.
7
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
MAKING OPTIONAL SURROUND-SOUND CONNECTIONS
our TV has extra jacks that allow you to con-
Ynect to an external audio amplifier system and
a powered subwoofer. This connection option will
provide a surround-sound experience similar to a
movie theater or concert hall.
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
1
_
Rear ofTV
+
HD INPUT-AV
5
DVI
CENTER CHANNEL AMP INPUT
Front Speakers
Rear Speakers
HD INPUT-AV
4
G/Y
R/Pr
INPUT-AV
1
OUTPUT
INPUT-AV
VIDEO
2
SUBWOOFER
To make the connections shown in this example,
you will need:
Y
B/Pb
+
-
+
-
VIDEO
S-VIDEO
S-VIDEO
L
L
Pb
1
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
H
•
two cables for audio connections (standard
RCA connectors)
R
• four paired wires for speaker connections
• one cable for a subwoofer connection
(standard RCA connectors).
2
3
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Rear of Amplifier with Dolby Pro Logic or Dolby Digital
Rear of Powered Subwoofer
Customer Care Center at 1-800-531-0039.
Rear ofTV
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
-180o
Phase
0o
Connect from the Center Speakers out-
put jacks on the amplifier with Dolby Pro
Logic* or Dolby Digital to the correspon-
ding CENTER CHANNEL INPUT jacks on
the rear of the TV. Place the TV’s AMP
switch in the EXT (external) position.
_
+
HD INPUT-AV
5
4
1
10
90
Crossover
Frequency
150 Hz
1
4
DVI
CENTER CHANNEL AMP INPUT
Volume
HD INPUT-AV
G/Y
R/Pr
INPUT-AV
1
OUTPUT
INPUT-AV
VIDEO
2
SUBWOOFER
L
R
Low
Y
B/Pb
VIDEO
S-VIDEO
Level
Input
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
AUDIO
H
Connect from the L(eft) and R(ight)
AUDIO OUTPUT jacks on the rear of the
TV to the L(eft) and R(ight) TV IN jacks on
High
Level
Input
Powered Subwoofer
2
+
R
–
–
L
+
High
the rear of the Dolby receiver.
Level
Output
Connect from the receiver’s front and
surround speaker connectors to the front
and rear surround speakers.
3
4
Connect from the SUBWOOFER output
jack on the rear of the TV to the L(eft) and
R(ight) Low Level Input jacks on the rear of
the powered subwoofer.
Surround-sound Setup
NOTE: The gray circle indicates the primary viewing area.
Set the TV’s AUDIO OUT control to
FIXED. See page 10.
TV
5
(Center Speakers)
The diagram below, right shows how to arrange the
speakers and subwoofer for surround sound.
Front
Speaker
Front
Speaker
HELPFUL HINTS
Powered
• If you use a single cable to make the connec-
tion to the powered subwoofer, you will need
to increase the volume on the back of the
subwoofer to compensate for the absence of
the second cable.
Subwoofer
• You must adjust the trim of the powered sub-
woofer at the powered subwoofer. Trim refers
Rear
Speaker
Rear
Speaker
*“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING A STANDARD DVD PLAYER
omponent video inputs allow the highest pos-
Csible color and picture resolution in the play-
back of digital signals, such as those of DVD
players. The color difference signals (Pb, Pr) and
the luminance (Y) signal are connected and
received separately. The result is better color
bandwidth information than is possible with com-
posite video (labeled VIDEO on your TV’s jack
panel) or S-Video connections.
ANTENNA IN 75Ω
AMP SWITCH
EXT
Rear of TV
INT
_
+
HD INPUT-AV
5
4
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV
G/Y
1
R/Pr
INPUT-AV
1
OUTPU
INPUT-AV
2
SUBWOOFER
2
Y
To make the connections shown in this example,
you will need:
• three cables for video connections (standard
RCA connectors)
B/Pb
VIDEO
S-DEO
VIDEO
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
H
R
• two cables for audio connections (standard
RCA connectors).
Rear of DVD Player*
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
DIGITAL AUDIO OUT
1
1
2
PCM-MPEG2-Dolby Digital-DTS
2
PR/CR
Y
P
B/CB
R
L
(CVBS)
Customer Care Center at 1-800-531-0039.
(Y/C)
S-VIDEO OUT
COAXIAL
OPT OUT
SUB WF OUT
AUDIO OUT
VIDEO OUT
VIDEO OUT
*(Example: Philips DVD model DVD712)
Connect the YPbPr (component)
VIDEO OUT jacks from the DVD player
HELPFUL HINTS
1
• To simplify making connections, the con-
nectors on audio and video cables are often
color coded. The jacks on your TV are like-
wise color coded to match the connectors.
• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbrevia-
tions and terms may vary, the letters B and
R stand for the blue and red color compo-
nent signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the directions-for-use manual for
your DVD or digital accessory for more
information.
• You can also connect a satellite receiver to
the TV in a manner similar to the example
shown on this page. If you connect a satel-
lite receiver to the TV, you will need to use
the receiver’s channel-memorization system
to store channels in the receiver’s memory.
• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.
• CVI is not accessible in the PIP window.
See page 8 in the Quick Use and Setup
Guide for more on the PIP feature.
to the INPUT-AV 1 YPbPr (component
video) jacks on the rear of the TV.
CVI
NOTE: The INPUT-AV 1 YPbPr jacks
will accept 480i (interlaced) output sig-
nals only. The connection example on this
page assumes the use of a DVD player
with interlaced output. Some DVD play-
ers, however, have YPbPr outputs that can
be switched between interlaced and pro-
gressive scan. If you are attempting to use
a DVD player with progressive-scan (480p
output) capability to make the connection
shown in this example, you must be sure
to switch the DVD player to interlaced. If
necessary, refer to the DVD player’s direc-
tions-for-use manual for help. If you want
to use the DVD player in progressive-scan
mode, you must use the
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
DN
UP
PICTURE
SOUND
HD INPUT-AV 4 jacks (see page 14).
MENU/
SELECT
STATUS/
EXIT
Connect the AUDIO OUT L(eft) and
R(ight) jacks from the DVD player to the
INPUT-AV 1 AUDIO jacks on the rear of
the TV.
MUTE
2
VOL
CH
Press the AV button on the remote con-
trol as many times as necessary to select
the CVI (component video input) source
on the TV for the viewing of materials
from your DVD player.
1
4
7
2
5
8
0
3
6
3
9
TV/VCR
A/CH
SURF
WARNING
To prevent uneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 62.
REC •
SLEEP
3
FORMAT
SAP
AV
DOLBY V PROG.LIST
POSITION
PIP
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING AN S-VIDEO DEVICE
he S(uper)-Video connection on the rear (and
Tside panel) of the TV can give you better pic-
ture detail and clarity for the playback of S-VHS
VCR tapes or DVDs than the normal antenna
(RF signal) or Video (composite) picture connec-
tions. The example given connects a DVD/VCR
Combi unit to the INPUT-AV 2 jacks on the rear
of the TV.
ANTENNA IN 75Ω
AMP SWITCH
EXT
Rear of TV
INT
_
+
HD INPUT-AV
5
4
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV
G/Y
R/Pr
NOTE: The accessory device must have an
S-VIDEO output jack to make the connection
explained on this page.
2
INPUT-AV
1
OUTPUT
INPUT-AV
VIDEO
2
FER
Y
B/Pb
VIDEO
S-VIDEO
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
To make the connections, you will need:
• one S-Video cable
H
R
Rear of Device with
S-VIDEO Output*
• two cables for audio connections (standard
RCA connectors).
DVDCR
1
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
IN
DIGITAL AUDIO OUT
PCM BITSTREAM
COMPONENT
VIDEO OUT
/
ANT-IN
L
DVD/VCR
Y
AUDIO OUT
AUDIO
Cr
L
R
ANT-OUT
Cb
VIDEO
R
Customer Care Center at 1-800-531-0039.
OPTICAL COAXIAL
S-VIDEO
OUT
CH3 CH4
*(Example: Philips DVD/VCR Combi model DV910VHS)
Connect the S-VIDEO OUT jack on the
rear of the accessory device with
S-VIDEO output to the INPUT-AV 2
S-VIDEO jack on the rear of the TV.
1
HELPFUL HINTS
AV2
• To simplify making connections, audio
cables are often color coded: red for the
right channel, and white for the left chan-
nel. The jacks on your TV are likewise
color coded to match the connectors. To
make S-Video connections, you must use
an S-Video cable.
Connect the DVD/VCR AUDIO OUT
jacks on the rear of the accessory device
to the INPUT-AV 2 AUDIO input jacks on
the rear of the TV.
2
Press the AV button on the remote con-
trol as many times as necessary to select
the AV2 source on the TV for the viewing
of materials from your S-Video device.
3
• You can also connect a satellite receiver,
laser-disc player, video-game player, or
other accessory device with S-Video
capability to the TV in a manner similar
to the example shown on this page.
POWER
• If you connect a satellite receiver to the
TV, you will need to use the receiver’s
channel-memorization system to store
channels in the receiver’s memory.
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
WARNING
MUTE
Video sources that show a constant nonmov-
ing pattern on the TV screen can cause pic-
ture-tube damage. When you are not using
your video accessory devices, turn them off.
Also, regularly alternate the use of accessory
video sources with normal TV viewing. See
page 62.
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
REC •
SLEEP
3
FORMAT
SAP
AV
DOLBY V PROG.LIST
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING A DVD PLAYER WITH PROGRESSIVE-SCAN CAPABILITY
he following instructions explain how to
Tconnect a DVD player with progressive-scan
capability to the HD INPUT-AV 4 jacks on
your TV.
ANTENNA IN 75Ω
AMP SWITCH
EXT
Rear of TV
INT
_
+
To make the connections, you will need:
• three cables for video connections (standard
RCA connectors)
HD INPUT-AV
5
4
DVI
CENTER CHANNEL AMP INPUT
1
HD INPUT-AV
G/Y
• two cables for audio connections (standard
RCA connectors).
R/Pr
INPUT-AV
1
OUTPUT
INPUT-AV
VIDEO
2
SUBWOOFER
Y
2
B/Pb
VIDO
SVIDEO
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
S-VIDEO
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
O
R
AUDIO
H
R
Customer Care Center at 1-800-531-0039.
VIDEO
Y
AUDIO OUT
2CH
BITSTREM
/PM
3
AC IN ~
VIDEO
Connect from the YPrPb jacks on
L
PB
PR
the rear of the DVD player to the
HD INPUT-AV 4 G/Y, R/Pr, B/Pb jacks
on the rear of the TV.
R
SELECT
S
1
COAXIAL
DIGITAL
OPTICAL
I
P
Rear of DVD Player with Progressive-scan Capability
Connect from the L(eft) and R(ight)
HELPFUL HINTS
AUDIO OUT jacks on the rear of the
DVD player to the HD INPUT-AV 4
AUDIO L(eft) and R(ight) jacks on the rear
2
• If after connecting your DVD player your
display is filled with wavy lines, it may be
that your DVD player is not set to progres-
sive-scan mode. Some DVD players have an
I/P (interlaced/progressive scan) switch
located on the back or front of the players for
changing from interlaced to progressive-scan
mode. Other DVD players may allow the
mode to be changed by pressing a button on
the DVD player’s remote control or by using
the DVD player’s on-screen menu. If the
interlaced/progressive-scan selection
option is provided only through the DVD
on-screen menu, you will need to connect
the DVD player to another AV input
source in addition to HD INPUT-AV 4 to
see the DVD menu. Select this additional
AV source on screen to see the DVD menu
and choose progressive-scan mode. You
will then be able to see the DVD picture
through the AV4 source.
AV4
of the TV
.
Make sure the DVD player is in pro-
gressive-scan mode. You will not get a
viewable picture through the HD
INPUT-AV 4 jacks if the DVD player is
in interlaced mode.
3
4
For more information on placing your
DVD player in progressive-scan mode,
see the DVD player’s directions-for-use
manual. Also, see the Helpful Hints to
the right. The way in which progres-
sive-scan mode is selected varies among
DVD players.
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
DN
UP
Press the AV button on your TV remote
control as many times as necessary to
select the AV4 signal source for the view-
ing of materials from your progressive-
scan DVD player.
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
• Some DVD players have dedicated progres-
sive-scan output jacks that are labeled as
such and require no switching to provide a
picture through the HD INPUT-AV 4 jacks.
See your DVD player’s directions-for-use
manual for information.
MUTE
VOL
CH
HELPFUL HINT
1
4
7
2
5
8
0
3
6
• The default color-space setting for the
HD INPUT-AV 4 jacks is YPbPr. RGB is
also an option. If the picture’s color looks
grossly incorrect, try changing either the
DVD player’s or TV’s color-space setting.
See the DVD player’s directions-for-use
manual for information on setting its color
space. Or see page 61 in this manual to set
the TV’s color space.
If you experience difficulties receiving
sound with a DVD disc, check the sound
9
TV/VCR
A/CH
SURF
WARNING
To prevent uneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 62.
REC •
SLEEP
4
FORMAT
SAP
AV
DOLBY V PROG.LIST
• The Picture-in-Picture (PIP) feature does
not function with AV4 or AV5.
POSITION
PIP
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING AN HD RECEIVER TO THE HD INPUT-AV 4 JACKS
igital equipment with a 1080i or 480p out-
Dput, is compatible with the HD INPUT-AV 4
video jacks.
ANTENNA IN 75Ω
Rear of TV
3
NOTE: This television is designed to be compati-
ble with high-definition signal standards 1080i
and 480p as specified by the Electronic Industries
Association standard EIA770.3. Because output
standards may vary by manufacturer, you may
encounter some digital equipment that will not
properly display pictures on the TV.
HD INPUT-AV
5
4
DVI
HD INPUT-AV
G/Y
2
R/Pr
INPUT-AV
1
INPUT-AV
VIDEO
2
SUBWOOFER
Y
B/Pb
VIDEO
S-VIDEO
1
2
S-VIDEO
L
L
Pr
1
V
L
L
L
SYNC
AUDIO
R
AUDIO
R
O
R
AUDIO
Coaxial Cable
Lead-in
H
To make the connections shown in this example,
you will need:
R
from
Satellite
Dish Antenna
• one S-VIDEO cable
• three cables for video connections (standard
RCA connectors)
• four cables for audio connections (standard
RCA connectors)
AUDIO AUDIO
Y
PB
PR
L
L
OUT TO TV
VCR
CONTROL
CH 3
CH 4
R
R
DIGITAL
AUDIO OUT
RF
• one coaxial cable (75Ω).
VIDEO VIDEO
IN FROM ANT
SATELLITE IN
PHONE JACK REMOTE
S-VIDEO
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Rear of HD Receiver
(Example: Philips DSHD800)
Coaxial Cable Lead-in
from Cable Outlet,
Cable Converter Box,
orVHF/UHF Antenna
3
3
Customer Care Center at 1-800-531-0039.
HELPFUL HINTS
• HD receivers will supply stereo sound to the TV only through the audio
left and right cables, not through the coaxial cable.
• Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv-
er’s on-screen menu and a picture (valid signal) from the receiver should
it be switched to SD mode.
• The HD INPUT-AV 4 jacks are for standard RCA-type phono plugs.
Your HD receiver may use RCA or BNC output jacks. If your HD
receiver comes with BNC jacks, you will need to purchase BNC-to-RCA
adapters to connect the receiver to the TV. You should be able to pur-
chase these adapters at most stores that sell electronics. Or you can call
our Customer Care Center at 1-800-531-0039.
Connect S-VIDEO and audio cables.
NOTE: This example uses
INPUT-AV 1. You can use INPUT-AV 2 or
1
the side input jacks if you want.
• Connect an S-VIDEO cable from the HD
receiver’s S-VIDEO jack to the TV’s
INPUT-AV 1 S-VIDEO jack.
• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s
INPUT-AV 1 L(eft) and R(ight) AUDIO
jacks.
Connect component video and audio
cables to the TV’s HD inputs.
• Connect from the YPRPB jacks on
2
the HD receiver to the TV’s HD
INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.
• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s HD
INPUT-AV 4 L(eft) and R(ight) AUDIO
jacks.
OR
BNC-to-
RCA
Adapter
BNC
Connector
Adapter
Fitted to
Connection
RCA
Connector
Connect coaxial cables.
• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF antenna to the IN FROM
ANT jack on the HD receiver.
• Connect a coaxial cable from the OUT
TO TV jack to the ANTENNA IN 75Ω
jack on the TV.
• Connect the coaxial cable lead-in from a
satellite dish antenna to the SATELLITE
IN jack on the HD receiver.
• The HD INPUT-AV 4 jacks are compatible with some digital equipment
having RGB outputs with “sync on green” or RGB with “separate H and V
sync.” Output standards for digital equipment, however, may vary by manu-
facturer. No industry standards have been established for HD television RGB
signal systems, timing, synchronization, and signal strengths. If the digital
equipment you want to connect to your TV offers both component video and
RGB outputs, component video is the suggested connection to use.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr.
RGB is also an option. If the picture color looks grossly incorrect, try
changing either the receiver’s or TV’s color space. See the receiver’s
directions-for-use manual for information on setting its color space. Or
see page 61 in this manual for setting the TV’s AV4 color space.
• AV4 and AV5 do not function with the PIP feature. They cannot be dis-
played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.
3
Refer to the directions-for-use manual
that came with the HD receiver for setup
instructions.
4
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING A CAMCORDER
he side panel jacks provide a convenient way
Tfor you to connect a camcorder to your TV.
The side panel jacks are recognized by your TV
as AV3.
1
Side Jack Panel
Typical
Camcorder
S-VIDEO
G
You can obtain S-VIDEO quality with an S-VHS,
Hi-8, or digital camcorder by connecting to the
S-VIDEO input instead of the VIDEO (composite)
input.
2
VIDEO
L
AUDIO
R
To make the connections shown in this example,
you will need:
• an S-VIDEO cable
• two cables for audio connections (standard
RCA connectors).
S-VIDEO
DV
VIDEO
AUDIO
LEFT
RIGHT
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.
HELPFUL HINT
AV3
To simplify making connections, the con-
nectors on audio cables are often color
coded: red for the right channel, and white
for the left channel. The jacks on your TV
are likewise color coded to match the con-
nectors. To make S-Video connections, you
Connect from the S-VIDEO output on
the camcorder to the S-VIDEO input in
the TV’s side panel.
1
2
3
4
Connect from the AUDIO outputs on
the camcorder to the side panel AUDIO
L(eft) and R(ight) inputs.
Press the AV button on the remote con-
trol as many times as necessary to select
the AV3 source on the TV.
POWER
Turn the camcorder on, insert a video-
tape and press PLAY to view the tape
on the TV.
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
REC •
SLEEP
3
FORMAT
SAP
AV
DOLBY V PROG.LIST
POSITION
PIP
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessory Devices toYourTV
CONNECTING AND USING HEADPHONES WITH YOUR TV
Side Jack Panel
he TV’s side panel has a headphone jack for
Tpersonal listening.
G
Insert the headphone plug into the head-
phone jack ; in the TV’s side panel.
1
1
Turn down the TV’s volume or press
c
the Mute button
on the remote con-
2
trol to turn off the TV’s internal speakers.
See the section below for information on
adjusting headphone volume and balance.
PICTURE
SOUND
NOTE: The headphone impedance must
be between 8 and 4,000 ohms. The head-
phone jack is stereo and 3.5 mm in size.
STATUS/
S
EXIT
2
2
MUTE
VOL
CH
he HEADPHONE controls allow you to
Tadjust the volume and balance of the
sound going to the headphones.
SOUND
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
30
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
Press the CURSOR RING DOWN
once to highlight SOUND.
2
POWER
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
SOUND
3
VOLUME
BALANCE
TREBLE
BASS
BALANCE
INCR SURROUND
HEADPHONE
Press the CURSOR RING DOWN
repeatedly until HEADPHONE is
highlighted. Then press the CURSOR
RING RIGHT to enter the
HEADPHONE submenu.
.
4
TV
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
SWAP
DN
UP
3
PICT
SOUND
6
Press the CURSOR RING DOWN
MENU/
SELECT
STATUS/
EXIT
or UP to highlight VOLUME or
BALANCE. Then press the CURSOR
RING LEFT or RIGHT to adjust the
control.
SOUND
5
HEADPHONE
VOLUME
BALANCE
30
MUTE
CH
2,4,
Press the STATUS/EXIT button to
exit the menu.
1
6
2
5
8
0
3
6
5
4
7
TV/VCR
A/CH
9
SOUND
SURF
HEADPHONE
VOLUME
BALANCE
HELPFUL HINT
0
POSITION
PIP
The AVL, INCR. SURROUND, and BASS
BOOST controls do not function with the
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
PROGRAMMING THE TV REMOTE TO WORK WITH ACCESSORY DEVICES
DN
UP
SOUND
PICTURE
Satellite Receiver
our TV remote is capable of working not
Yonly your TV but also other infrared
remote (IR) controlled devices such as VCRs,
cable TV converter boxes, satellite receivers,
DVD players, and laser-disc players.
If you want to use your TV remote to oper-
ate a VCR or other accessory device, you
will need to perform this initial check
explained in this section. You may also need
to go to the sections on the “Code-entry
Method” and the “Search Method” in the
pages that follow.
Cable Converter Box
DVD Player
Press the VCR or ACC(essory)
mode button on the TV remote for
the desired accessory device category.
1
NOTE: Pressing the VCR mode button
allows access to product codes for
VCRs. Pressing the ACC(essory) mode
button allows access to the product
codes for cable TV converters, satellite
receivers, DVD players, and laser-disc
players.
VCR
Point the TV remote toward the
desired accessory device and press
the POWER button.
2
Does the remote turn the accessory
device on?
POWER
If yes,
and try other function but-
1
tons on the TV remote. With a VCR,
for example, try the Play, Stop, and
Rewind buttons, for example. (See
page 23 for information on how the
remote buttons correspond with acces-
sory device functions.) If they also
work the accessory device, then the
remote is ready and no further steps
are needed.
TV
VCR
PIP CH
ACC
2
1
ACTIVE
SWAP
CONTROL FREEZE
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
If not, do the following:
MUTE
VOL
CH
Look up a four-digit remote code
number on pages 21 or 22 for your
brand of accessory device. Then go
through the simple steps for entering a
four-digit code as explained on
page 19.
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
HELPFUL HINT
If more than one four-digit code number is
listed, you may have to try more than the
first number given to locate your device’s
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING THE CODE-ENTRY METHOD TO PROGRAM YOUR TV REMOTE
DN
UP
SOUND
PICTURE
Satellite Receiver
ow that you have looked up the four-
Ndigit remote-control Direct-entry Code
for your brand of accessory device, you are
ready to follow the simple steps shown below
to program your TV remote.
Please read through all the steps before
beginning.
Cable Converter Box
First, press and hold down the VCR
or ACC (for an accessory device
1
other than a VCR) mode button on
the TV remote. Then press and hold
down the MENU/SELECT button at
the same time for a brief moment.
Release the buttons. The TV remote
back light will switch on.
DVD Player
NOTE: For correct operation, you
must first press and hold the mode
button and then press and hold the
MENU/SELECT button simultaneously.
VCR
Within 30 seconds of pressing the
VCR (or ACC) button and
MENU/SELECT button, enter a
four-digit code for the accessory
device (see pages 21 and 22).
If you make a mistake while attempt-
ing to enter the four-digit code and
want to start again, press any button
other than one with a number. Then
return to step 1 to begin again.
2
3
POWER
1
Point the remote at the accessory
device. Then press the POWER button
on the remote to turn the device on.
TV
VCR
ACC
3
1
ACTIVE
SWAP
PIP CH
CONTROL FREEZE
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
HELPFUL HINTS
• If you do not enter a complete code within
30 seconds, you will need to perform step
1 of the Code-entry Method again.
MUTE
2
VOL
CH
1
4
7
2
5
8
0
3
6
• If you enter more than four digits, the unit
will retain the first four digits entered.
• If the procedure explained above does not
work the first time, repeat the steps using
the same remote code number.
9
TV/VCR
A/CH
SURF
• If after a second try the remote does not
operate your accessory device, and more
code numbers are listed for your brand,
use the next listed code number.
POSITION
PIP
• If after repeated attempts the Entry-code
Method does not allow you to work your
accessory device with your TV remote, try
the Search Method explained on the next
page.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING THE SEARCH METHOD TO PROGRAM YOUR TV REMOTE
DN
UP
SOUND
PICTURE
Satellite Receiver
our TV remote can be set to work various
Yaccessory devices (VCRs, cable convert-
ers, and satellite receivers, for example) by
what is called the Search Method.
06
NOTE: The Search Method works only with
devices equipped with channel-display indi-
cators on the devices themselves or the abili-
ty to show channel numbers on the TV
0708
09
screen. If the Code-entry Method (shown in
the previous section) did not enable your TV
remote to work your accessory device, then
follow the easy steps listed below. Please
read the steps once before performing them.
Cable Converter Box
06
0708
Turn on the desired device. Press
09
and hold down the VCR or ACC
(for an accessory device other than
a VCR) mode button on the TV
remote. Then press and hold down the
SURF button as you hold down the
desired mode (VCR or ACC) button.
1
VCR
06
0708
NOTE: For correct operation, you
must press and hold down the desired
mode (VCR or ACC) button first and
then press and hold down the SURF
button second.
09
While holding down the SURF and
the desired mode (VCR or ACC)
buttons simultaneously, point the
remote toward the accessory device
and continue holding the buttons
down.
POWER
HELPFUL HINTS
1,3
• The remote’s back light will blink
as the remote moves through its
product code list. After the remote
identifies the product code for
your accessory device and you
release the remote buttons, the
back light will blink twice.
TV
VCR
ACC
ACTIVE
SWAP
PIP CH
CONTROL FREEZE
Watch the Channel Indicator on
your accessory device. Channel num-
bers will scan up when the TV remote
has identified the correct code for
your accessory device. This may take
several minutes.
DN
UP
PICTURE
SOUND
2
1,3
MENU/
SELECT
STATUS/
EXIT
• Your TV remote may locate the
accessory device’s code quickly or
within several minutes.
MUTE
Release the mode (VCR or ACC)
and SURF buttons as soon as chan-
nel numbers start to scan up. The
scanning means that your TV remote
has found the code for your accessory
device.
• Don’t let the accessory device
scan up more than five channels
when the correct code is found—
the remote may pass up the right
code and have to repeat the search
cycle.
VOL
CH
3
1
4
7
2
5
8
0
3
6
1,3
9
NOTE: If no channel change happens
after several minutes, repeat steps 1 and
2. Then if a channel change still does not
occur, the remote will not work with the
desired accessory device.
TV/VCR
A/CH
SURF
POSITION
PIP
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
DIRECT-ENTRY CODES FOR A/V ACCESSORY DEVICES
VCR
DN
UP
SOUND
PICTURE
CODE NUMBER
JENSEN . . . . . . . . . . . . . . . . .0068
QUARTZ . . . . . . . . . . . . . . .0073
ADMIRAL . . . . . . . . . . . . . . .0075, 0236
KEC . . . . . . . . . . . . . . . . . .0064, 0305
KLH . . . . . . . . . . . . . . . . . .0099
KENWOOD . . . . . . . . . . . . .0068, 0094, 0411, 0065
KODAK . . . . . . . . . . . . . . . .0062, 0064
LXI . . . . . . . . . . . . . . . . . . .0064
LLOYD'S . . . . . . . . . . . . . . . .0027, 0235
LOGIK . . . . . . . . . . . . . . . . .0099
MEI . . . . . . . . . . . . . . . . . .0062
MGA . . . . . . . . . . . . . . . . .0070, 0088, 0267
MGN TECHNOLOGY . . . . . . .0267
MTC . . . . . . . . . . . . . . . . .0027, 0267
MAGNASONIC . . . . . . . . . . . .0305
QUASAR . . . . . . . . . . . . . . .0062, 0189, 0104, 0481,
. . . . . . . . . . . . . . . . . . . . .0828
ADVENTURA . . . . . . . . . . . . .0027
AIKO . . . . . . . . . . . . . . . . . .0305
RCA . . . . . . . . . . . . . . . . . .0087, 0176, 0229, 0069,
. . . . . . . . . . . . . . . . . . . . .0132, 0085, 0062, 0075,
. . . . . . . . . . . . . . . . . . . . .0092, 0104, 0133, 0267,
. . . . . . . . . . . . . . . . . . . . .0304
AIWA . . . . . . . . . . . . . . . . .0334, 0495, 0027, 0064
AKAI . . . . . . . . . . . . . . . . . .0133, 0080, 0068, 0076,
. . . . . . . . . . . . . . . . . . . . .0088, 0183, 0269
AMERICA ACTION . . . . . . . . .0305
RADIO SHACK . . . . . . . . . . .0027
AMERICAN HIGH . . . . . . . . . .0062
RADIX . . . . . . . . . . . . . . . . .0064
ASHA . . . . . . . . . . . . . . . . .0267
RANDEX . . . . . . . . . . . . . . .0064
AUDIOVOX . . . . . . . . . . . . . .0064
REALISTIC . . . . . . . . . . . . . . .0027, 0131, 0074, 0075,
. . . . . . . . . . . . . . . . . . . . .0064, 0062, 0089, 0073,
. . . . . . . . . . . . . . . . . . . . .0093
BEAUMARK . . . . . . . . . . . . . .0267
BELL & HOWELL . . . . . . . . . .0131
BROKSONIC . . . . . . . . . . . . .0148, 0211, 0029, 0236,
. . . . . . . . . . . . . . . . . . . . .0238, 0322, 0388, 0506
CCE . . . . . . . . . . . . . . . . . .0099, 0305
CALIX . . . . . . . . . . . . . . . . .0064
CANON . . . . . . . . . . . . . . . .0194, 0062, 0129
CAPEHART . . . . . . . . . . . . . .0047
CARVER . . . . . . . . . . . . . . . .0108
CINERAL . . . . . . . . . . . . . . .0305
CITIZEN . . . . . . . . . . . . . . . .0305, 0064
COLT . . . . . . . . . . . . . . . . .0099
CRAIG . . . . . . . . . . . . . . . . .0064, 0099, 0074, 0267,
. . . . . . . . . . . . . . . . . . . . .0298
MAGNAVOX . . . . . . . . . . . . .0062, 0108, 0137, 0130,
. . . . . . . . . . . . . . . . . . . . .0027, 0066, 0176
MAGNIN . . . . . . . . . . . . . . .0267
MARANTZ . . . . . . . . . . . . . .0108, 0062
MARTA . . . . . . . . . . . . . . . . .0064
MATSUSHITA . . . . . . . . . . . . .0062, 0189, 0481
MEMOREX . . . . . . . . . . . . . .0131, 0074, 0506, 0027,
. . . . . . . . . . . . . . . . . . . . .0064, 0075, 0062, 0073,
. . . . . . . . . . . . . . . . . . . . .0267, 0334, 0066, 0189,
. . . . . . . . . . . . . . . . . . . . .0236, 0481, 0828, 0829
MINOLTA . . . . . . . . . . . . . . .0132, 0069
MITSUBISHI . . . . . . . . . . . . . .0200, 0088, 0102, 0241,
. . . . . . . . . . . . . . . . . . . . .0269, 0070, 0075, 0094,
. . . . . . . . . . . . . . . . . . . . .0470
MOTOROLA . . . . . . . . . . . . .0062, 0075
MULTITECH . . . . . . . . . . . . .0027, 0099
NAD . . . . . . . . . . . . . . . . .0085
NEC . . . . . . . . . . . . . . . . . .0065, 0067, 0068, 0077,
. . . . . . . . . . . . . . . . . . . . .0094, 0109, 0131
NIKKO . . . . . . . . . . . . . . . . .0064
NIKON . . . . . . . . . . . . . . . .0061, 0280
NOBLEX . . . . . . . . . . . . . . .0267
OLYMPUS . . . . . . . . . . . . . . .0062, 0253
OPTIMUS . . . . . . . . . . . . . . .0189, 0481, 0827, 0828,
. . . . . . . . . . . . . . . . . . . . .0075, 0085, 0829, 0064,
. . . . . . . . . . . . . . . . . . . . .0131, 0459
OPTONICA . . . . . . . . . . . . . .0089
RICOH . . . . . . . . . . . . . . . . .0061, 0280
RUNCO . . . . . . . . . . . . . . . .0066
STS . . . . . . . . . . . . . . . . . .0069
SALORA . . . . . . . . . . . . . . . .0102
SAMSUNG . . . . . . . . . . . . . . .0072, 0078, 0080, 0267
SANKY . . . . . . . . . . . . . . . . .0066, 0075
SANSUI . . . . . . . . . . . . . . . .0068, 0506, 0027, 0094,
. . . . . . . . . . . . . . . . . . . . .0109, 0236, 0298
SANYO . . . . . . . . . . . . . . . . .0074, 0073, 0131, 0267
SCOTT . . . . . . . . . . . . . . . . .0211, 0238, 0148, 0070,
. . . . . . . . . . . . . . . . . . . . .0072, 0237, 0239
SEARS . . . . . . . . . . . . . . . . .0081, 0132, 0064, 0069,
. . . . . . . . . . . . . . . . . . . . .0027, 0062, 0073, 0074,
. . . . . . . . . . . . . . . . . . . . .0093, 0131
CURTIS MATHES . . . . . . . . . .0062, 0068, 0087, 0189
CYBERNEX . . . . . . . . . . . . . .0078, 0267
DAEWOO . . . . . . . . . . . . . . .0305, 0588, 0047, 0072
DAYTRON . . . . . . . . . . . . . .0047
SEMP . . . . . . . . . . . . . . . . . .0072
SHARP . . . . . . . . . . . . . . . . .0075, 0089
SHINTOM . . . . . . . . . . . . . . .0099
SHOGUN . . . . . . . . . . . . . . .0078, 0267
SINGER . . . . . . . . . . . . . . . .0099
SONY . . . . . . . . . . . . . . . . .0060, 0061, 0059, 0280,
. . . . . . . . . . . . . . . . . . . . .0027, 0038, 0062
SUNPAK . . . . . . . . . . . . . . . .0280
SYLVANIA . . . . . . . . . . . . . . .0062, 0108, 0027, 0070,
. . . . . . . . . . . . . . . . . . . . .0130, 0137
SYMPHONIC . . . . . . . . . . . . .0027
TMK . . . . . . . . . . . . . . . . .0063, 0235, 0267
TATUNG . . . . . . . . . . . . . . . .0068
DENON . . . . . . . . . . . . . . . .0069
DYNATECH . . . . . . . . . . . . . .0027
ELECTROHOME . . . . . . . . . . .0064
ELECTROPHONIC . . . . . . . . . .0064
EMEREX . . . . . . . . . . . . . . . .0059
EMERSON . . . . . . . . . . . . . . .0211, 0029, 0236, 0305,
. . . . . . . . . . . . . . . . . . . . .0063, 0148, 0238, 0588,
. . . . . . . . . . . . . . . . . . . . .0235, 0321, 0506, 0088,
. . . . . . . . . . . . . . . . . . . . .0115, 0239, 0027, 0064,
. . . . . . . . . . . . . . . . . . . . .0070, 0095, 0322, 0388,
. . . . . . . . . . . . . . . . . . . . .0537
FISHER . . . . . . . . . . . . . . . . .0074, 0131, 0081, 0093
FUJI . . . . . . . . . . . . . . . . . . .0060, 0062
FUNAI . . . . . . . . . . . . . . . . .0027
GE . . . . . . . . . . . . . . . . . . .0062, 0087, 0075, 0092,
. . . . . . . . . . . . . . . . . . . . .0229, 0267
GARRARD . . . . . . . . . . . . . .0027
ORION . . . . . . . . . . . . . . . .0506, 0029, 0211, 0236,
. . . . . . . . . . . . . . . . . . . . .0322
PANASONIC . . . . . . . . . . . . .0062, 0189, 0828, 0481,
. . . . . . . . . . . . . . . . . . . . .0253, 0104, 0405, 0829,
. . . . . . . . . . . . . . . . . . . . .0129, 0252, 0254, 0273,
. . . . . . . . . . . . . . . . . . . . .0827
TEAC . . . . . . . . . . . . . . . . . .0027, 0068
TECHNICS . . . . . . . . . . . . . .0062, 0189, 0273
TEKNIKA . . . . . . . . . . . . . . .0027, 0062, 0064, 0079
THOMAS . . . . . . . . . . . . . . .0027
TOSHIBA . . . . . . . . . . . . . . .0072, 0237, 0239, 0070,
. . . . . . . . . . . . . . . . . . . . .0093, 0393
GO VIDEO . . . . . . . . . . . . . .0306, 0459, 0553, 0259
GOLDSTAR . . . . . . . . . . . . . .0064, 0045, 0065, 0498,
. . . . . . . . . . . . . . . . . . . . .0507
GRADIENTE . . . . . . . . . . . . .0035, 0027, 0435
GRUNDIG . . . . . . . . . . . . . . .0222
HI-Q . . . . . . . . . . . . . . . . .0074
HARLEY DAVIDSON . . . . . . . .0027
HARMAN/KARDON . . . . . . . .0065, 0102, 0108
HARWOOD . . . . . . . . . . . . .0095, 0099
HEADQUARTER . . . . . . . . . . .0073
HITACHI . . . . . . . . . . . . . . . .0069, 0193, 0132, 0092,
. . . . . . . . . . . . . . . . . . . . .0027, 0068, 0109
HUGHES NETWORK SYSTEMS .0069
PENNEY . . . . . . . . . . . . . . . .0062, 0267, 0064, 0069,
. . . . . . . . . . . . . . . . . . . . .0065, 0067, 0081
PENTAX . . . . . . . . . . . . . . . .0069, 0092, 0132
PHILCO . . . . . . . . . . . . . . . .0062, 0236, 0506
PHILIPS . . . . . . . . . . . . . . . . .0108, 0062, 0089, 0137,
. . . . . . . . . . . . . . . . . . . . .0830, 0831
PILOT . . . . . . . . . . . . . . . . .0064
PIONEER . . . . . . . . . . . . . . .0085, 0195, 0094
POLK AUDIO . . . . . . . . . . . .0108
PORTLAND . . . . . . . . . . . . . .0047
PROFITRONIC . . . . . . . . . . . .0267
TOTEVISION . . . . . . . . . . . . .0064, 0267
UNITECH . . . . . . . . . . . . . . .0267
VECTOR . . . . . . . . . . . . . . . .0072
VECTOR RESEARCH . . . . . . . .0065, 0067
VIDEO CONCEPTS . . . . . . . . .0067, 0072, 0088, 0248
VIDEOSONIC . . . . . . . . . . . . .0267
WARDS . . . . . . . . . . . . . . . .0062, 0087, 0089, 0027,
. . . . . . . . . . . . . . . . . . . . .0074, 0239, 0267, 0069,
. . . . . . . . . . . . . . . . . . . . .0075, 0099, 0108, 0176
WHITE WESTINGHOUSE . . . . .0099, 0305, 0236
XR-1000 . . . . . . . . . . . . . .0099, 0027, 0062
YAMAHA . . . . . . . . . . . . . . .0065
PROSCAN . . . . . . . . . . . . . . .0087, 0229
PROTEC . . . . . . . . . . . . . . . .0099
PULSAR . . . . . . . . . . . . . . . .0066, 0078
QUARTER . . . . . . . . . . . . . . .0073
ZENITH . . . . . . . . . . . . . . . .0066, 0027, 0060, 0061,
. . . . . . . . . . . . . . . . . . . . .0236, 0506
JVC . . . . . . . . . . . . . . . . . .0094, 0035, 0233, 0234,
. . . . . . . . . . . . . . . . . . . . .0068, 0411
DVD PLAYER
CODE NUMBER
DENON . . . . . . . . . . . . . . . .0859
GE . . . . . . . . . . . . . . . . . . .0862
HARMAN/KARDON . . . . . . . .0871
HITACHI . . . . . . . . . . . . . . . .0870
JVC . . . . . . . . . . . . . . . . . .0868
KENWOOD . . . . . . . . . . . . .0865
MAGNAVOX . . . . . . . . . . . . .0860
MARANTZ . . . . . . . . . . . . . .0866
MITSUBISHI . . . . . . . . . . . . . .0861
ONKYO . . . . . . . . . . . . . . . .0860
OPTIMUS . . . . . . . . . . . . . . .0869
PANASONIC . . . . . . . . . . . . .0859
PHILIPS . . . . . . . . . . . . . . . . .0866, 0860
PIONEER . . . . . . . . . . . . . . .0869, 0863
PROSCAN . . . . . . . . . . . . . . .0862
RCA . . . . . . . . . . . . . . . . . .0862, 0869
SAMSUNG . . . . . . . . . . . . . . .0870
SONY . . . . . . . . . . . . . . . . .0864
TECHNICS . . . . . . . . . . . . . .0859
THETA DIGITAL . . . . . . . . . . .0869
TOSHIBA . . . . . . . . . . . . . . .0860
YAMAHA . . . . . . . . . . . . . . .0859, 0867
ZENITH . . . . . . . . . . . . . . . .0872, 0860
SEE THE NEXT PAGE FOR MORE CODES.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
DIRECT-ENTRY CODES FOR A/V ACCESSORY DEVICES
DN
UP
SOUND
PICTURE
LASER-DISC PLAYER
CODE NUMBER
MARANTZ . . . . . . . . . . . . . .0853, 0850
MITSUBISHI . . . . . . . . . . . . . .0849
NAD . . . . . . . . . . . . . . . . .0849
NEC . . . . . . . . . . . . . . . . . .0879
NIKKODO . . . . . . . . . . . . . .0884
OPTIMUS . . . . . . . . . . . . . . .0849
PANASONIC . . . . . . . . . . . . .0856
PHILIPS . . . . . . . . . . . . . . . . .0853, 0850
PIONEER . . . . . . . . . . . . . . .0849, 0848
POLK AUDIO . . . . . . . . . . . .0853
QUASAR . . . . . . . . . . . . . . .0856
RCA . . . . . . . . . . . . . . . . . .0881, 0874
ADS . . . . . . . . . . . . . . . . . .0880
REALISTIC . . . . . . . . . . . . . . .0855
SAMSUNG . . . . . . . . . . . . . . .0858
SEGA . . . . . . . . . . . . . . . . . .0848
SHARP . . . . . . . . . . . . . . . . .0873
SONY . . . . . . . . . . . . . . . . .0854, 0852, 0878
TECHNICS . . . . . . . . . . . . . .0856
THETA DIGITAL . . . . . . . . . . .0853
VICTOR . . . . . . . . . . . . . . . .0876
YAMAHA . . . . . . . . . . . . . . .0857
AIWA . . . . . . . . . . . . . . . . .0855
CARVER . . . . . . . . . . . . . . . .0853, 0850, 0858
DENON . . . . . . . . . . . . . . . .0851, 0849, 0875
DISCO VISION . . . . . . . . . . . .0848
FUNAI . . . . . . . . . . . . . . . . .0855
HARMAN/KARDON . . . . . . . .0853
HITACHI . . . . . . . . . . . . . . . .0848
KENWOOD . . . . . . . . . . . . .0877
MAGNAVOX . . . . . . . . . . . . .0853, 0857, 0875
CABLE CONVERTER BOX
CODE NUMBER
ABC . . . . . . . . . . . . . . . . . .0030, 0028, 0034, 0035,
. . . . . . . . . . . . . . . . . . . . .0038, 0040, 0041, 0044,
. . . . . . . . . . . . . . . . . . . . .0060
HAMLIN . . . . . . . . . . . . . . . .0047, 0036, 0286, 0061,
. . . . . . . . . . . . . . . . . . . . .0300
REGENCY . . . . . . . . . . . . . . .0029
REMBRANDT . . . . . . . . . . . . .0038, 0097
RUNCO . . . . . . . . . . . . . . . .0027
HITACHI . . . . . . . . . . . . . . . .0038
HYTEX . . . . . . . . . . . . . . . . .0034
SL MARX . . . . . . . . . . . . . . .0067
ALLEGRO . . . . . . . . . . . . . . .0180, 0342
ANTRONIX . . . . . . . . . . . . . .0049, 0234
APACHE . . . . . . . . . . . . . . . .0797
JASCO . . . . . . . . . . . . . . . . .0042, 0180, 0342
JERROLD . . . . . . . . . . . . . . . .0030, 0039, 0303, 0041,
. . . . . . . . . . . . . . . . . . . . .0503, 0038, 0051, 0042,
. . . . . . . . . . . . . . . . . . . . .0837
SAMSUNG . . . . . . . . . . . . . . .0067, 0171
SCIENTIFIC ATLANTA . . . . . . .0035, 0044, 0033, 0504
SEAM . . . . . . . . . . . . . . . . . .0537
SIGNAL . . . . . . . . . . . . . . . .0042, 0067
SIGNATURE . . . . . . . . . . . . . .0038
SPRUCER . . . . . . . . . . . . . . .0048
ARCHER . . . . . . . . . . . . . . . .0049, 0066, 0180, 0234,
. . . . . . . . . . . . . . . . . . . . .0824
LINSAY . . . . . . . . . . . . . . . . .0467
BBT . . . . . . . . . . . . . . . . . .0294
MACOM . . . . . . . . . . . . . . . .0060
BELCOR . . . . . . . . . . . . . . . .0083
MAGNAVOX . . . . . . . . . . . . .0054
STARSIGHT . . . . . . . . . . . . . .0569, 0449
STARCOM . . . . . . . . . . . . . . .0030, 0042
STARGATE . . . . . . . . . . . . . . .0067, 0042, 0797, 0824
STARQUEST . . . . . . . . . . . . . .0042
BELL & HOWELL . . . . . . . . . .0041
MEMOREX . . . . . . . . . . . . . .0027
CABLE STAR . . . . . . . . . . . . .0083
MOVIE TIME . . . . . . . . . . . . .0090, 0183
NSC . . . . . . . . . . . . . . . . . .0183, 0090, 0097
NEXUS . . . . . . . . . . . . . . . .0797
CABLETENNA . . . . . . . . . . . .0049
CABLEVIEW . . . . . . . . . . . . .0049
SYLVANIA . . . . . . . . . . . . . . .0028
CENTURY . . . . . . . . . . . . . . .0180
NOVAPLEX . . . . . . . . . . . . . .0645
OAK . . . . . . . . . . . . . . . . . .0046, 0034
OPTIMUS . . . . . . . . . . . . . . .0048
PANASONIC . . . . . . . . . . . . .0048, 0134, 0027
PANTHER . . . . . . . . . . . . . . .0664
PARAGON . . . . . . . . . . . . . .0027
TFC . . . . . . . . . . . . . . . . . .0337
CITIZEN . . . . . . . . . . . . . . . .0180, 0342
COLOUR VOICE . . . . . . . . . .0052, 0058
COMBAND . . . . . . . . . . . . . .0259
TV86 . . . . . . . . . . . . . . . . .0090
TANDY . . . . . . . . . . . . . . . . .0285
TELECAPTION . . . . . . . . . . . .0248
COMTRONICS . . . . . . . . . . . .0067, 0087
CONTEC . . . . . . . . . . . . . . .0046
TELEVIEW . . . . . . . . . . . . . . .0067
TEXSCAN . . . . . . . . . . . . . . .0028
DIGI . . . . . . . . . . . . . . . . . .0664
PHILIPS . . . . . . . . . . . . . . . . .0052, 0058, 0269, 0317,
. . . . . . . . . . . . . . . . . . . . .0054, 0180
PIONEER . . . . . . . . . . . . . . .0171, 0050, 0560
POPULAR MECHANICS . . . . . .0427
TIMELESS . . . . . . . . . . . . . . .0445
EASTERN . . . . . . . . . . . . . . .0029
TOCOM . . . . . . . . . . . . . . . .0039, 0040
TOSHIBA . . . . . . . . . . . . . . .0027
EMERSON . . . . . . . . . . . . . . .0824
EVERQUEST . . . . . . . . . . . . . .0042, 0067
FOCUS . . . . . . . . . . . . . . . . .0427
TUSA . . . . . . . . . . . . . . . . . .0042
UNIKA . . . . . . . . . . . . . . . . .0180, 0234, 0049
UNITED ARTISTS . . . . . . . . . .0034
UNIVERSAL . . . . . . . . . . . . . .0234, 0049, 0066, 0083,
. . . . . . . . . . . . . . . . . . . . .0180, 0218
VIEWMASTER . . . . . . . . . . . . .0847
VIEWSTAR . . . . . . . . . . . . . .0285, 0054, 0087, 0090
ZENITH . . . . . . . . . . . . . . . .0027, 0552, 0081
ZENTEK . . . . . . . . . . . . . . . .0427
PRELUDE . . . . . . . . . . . . . . .0797
GC ELECTRONICS . . . . . . . . .0083, 0234
GE . . . . . . . . . . . . . . . . . . .0259
GARRARD . . . . . . . . . . . . . .0180
GEMINI . . . . . . . . . . . . . . . .0042, 0097, 0269, 0824
GENERAL INSTRUMENT . . . . . .0303, 0038, 0503, 0837
GOLDSTAR . . . . . . . . . . . . . .0067, 0171
GOODMIND . . . . . . . . . . . . .0797, 0824
PULSAR . . . . . . . . . . . . . . . .0027
QUASAR . . . . . . . . . . . . . . .0027
RCA . . . . . . . . . . . . . . . . . .0048
RADIO SHACK . . . . . . . . . . .0042, 0847, 0342, 0824
REALISTIC . . . . . . . . . . . . . . .0234
RECOTON . . . . . . . . . . . . . .0427
REGAL . . . . . . . . . . . . . . . . .0300, 0047, 0286
SATELLITE RECEIVER/DIGITAL SATELLITE SYSTEM
CODE NUMBER
GE . . . . . . . . . . . . . . . . . . .0593
GENERAL INSTRUMENT . . . . . .0388, 0896, 0574, 0581,
. . . . . . . . . . . . . . . . . . . . .0654
NORSAT . . . . . . . . . . . . . . . .0031
ALPHASTAR . . . . . . . . . . . . .0799
PANASONIC . . . . . . . . . . . . .0179, 0728
PHILIPS . . . . . . . . . . . . . . . . .0227, 0749, 0751
PICO . . . . . . . . . . . . . . . . . .0102
PRIMESTAR . . . . . . . . . . . . . .0654, 0388
RCA . . . . . . . . . . . . . . . . . .0593, 0170, 0882
RADIO SHACK . . . . . . . . . . .0581, 0896
RAMSEY . . . . . . . . . . . . . . . .0102
REALISTIC . . . . . . . . . . . . . . .0079, 0078
STS . . . . . . . . . . . . . . . . . .0237, 0068
SONY . . . . . . . . . . . . . . . . .0666
STAR CHOICE . . . . . . . . . . . .0896
STAR TRAK . . . . . . . . . . . . . .0207, 0448, 0574
STRONG . . . . . . . . . . . . . . . .0448
TOSHIBA . . . . . . . . . . . . . . .0109, 0776, 0817, 0088
TOWN & COUNTRY . . . . . . .0574
AMPLICA . . . . . . . . . . . . . . .0099
AMWAY . . . . . . . . . . . . . . . .0070, 0102
ARUNTA . . . . . . . . . . . . . . .0548
GOULD . . . . . . . . . . . . . . . .0082
HNS . . . . . . . . . . . . . . . . . .0644
HTS . . . . . . . . . . . . . . . . . .0802
HITACHI . . . . . . . . . . . . . . . .0846
HOMECABLE . . . . . . . . . . . . .0265
HUGHES NETWORK SYSTEMS .0776
HYTEK . . . . . . . . . . . . . . . . .0122
IQ . . . . . . . . . . . . . . . . . . .0237
IQ PRISM . . . . . . . . . . . . . . .0237
INTERSAT . . . . . . . . . . . . . . .0070
JVC . . . . . . . . . . . . . . . . . .0802
JANEIL . . . . . . . . . . . . . . . . .0179
JERROLD . . . . . . . . . . . . . . . .0388, 0654
LEGEND . . . . . . . . . . . . . . . .0296
MACOM . . . . . . . . . . . . . . . .0088, 0045
MAGNAVOX . . . . . . . . . . . . .0749, 0751
MEMOREX . . . . . . . . . . . . . .0296, 0751
NEXT LEVEL . . . . . . . . . . . . .0896
ASTRO INDUSTRIES . . . . . . . .0122
BMC . . . . . . . . . . . . . . . . .0114
BSR . . . . . . . . . . . . . . . . . .0122
CABLE INNOVATIONS . . . . . . .0581
CAPETRONIC . . . . . . . . . . . .0122
CENTURY . . . . . . . . . . . . . . .0565
CHANNEL MASTER . . . . . . . .0045, 0239
CHAPARRAL . . . . . . . . . . . . .0080, 0236, 0243
CITOH . . . . . . . . . . . . . . . . .0191
CONIFER . . . . . . . . . . . . . . .0031
CURTIS MATHES . . . . . . . . . .0088, 0099
DX ANTENNA . . . . . . . . . . .0068
UNIDEN . . . . . . . . . . . . . . . .0265, 0079, 0101, 0397,
. . . . . . . . . . . . . . . . . . . . .0581, 0751, 0103, 0323,
. . . . . . . . . . . . . . . . . . . . .0749
DRAKE . . . . . . . . . . . . . . . .0091, 0272, 0045, 0176
ECHOSTAR . . . . . . . . . . . . . .0307, 0802, 0175, 0186,
. . . . . . . . . . . . . . . . . . . . .0296
ZENITH . . . . . . . . . . . . . . . .0091, 0883, 0088
EXPRESSVU . . . . . . . . . . . . . .0802
TELEVISION
CODE NUMBER
MAGNAVOX . . . . . . . . . . . . .0583
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING THE TV REMOTE WITH ACCESSORY DEVICES
DN
UP
SOUND
PICTURE
he Chart below provides you with com-
POWER
Tmon accessory-device functions associat-
ed with the buttons on your Philips TV remote
control. (See pages 18–20 for information on
programming your TV remote to operate
accessory devices.)
POWER
PAUSE
REWIND
STOP
FAST FORWARD
PLAY
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
NOTES:
DN
UP
• Functions can vary according to the manu-
facturer’s specifications for each accessory
device.
PICTURE
SOUND
CURSOR RING UP
CURSOR RING LEFT
STATUS/EXIT
OK Button
CURSOR RING RIGHT
MENU/
SELECT
STATUS/
EXIT
• First press the VCR mode button to use the
TV remote to operate a VCR.
MENU/SELECT
MUTE
• First press the ACC mode button to use the
TV remote to operate a DVD player, laser-
disc player, cable converter box, or satellite
receiver/digital satellite system.
CURSOR RING DOWN
CH + & CH -
VOL
CH
1
4
7
2
5
8
0
3
6
NUMBER Buttons (0-9)
POWER
9
TV/VCR
A/CH &TV/VCR
REC, SAP
A/CH
SURF
REC •
SLEEP
FORMAT
SAP
AV
DOLBY V PROG.LIST
TV
VCR
ACC
POSITION
PIP
BACK LIGHT
ACTIVE
TV RemoteVCR
and Accessory Mode Buttons
Common Cable Converter
Box or Satellite
Receiver/Digital Satellite
System (DSS) Function
Common DVD/LD Player
Function
Button on TV Remote
Common VCR Function
POWER
POWER
POWER
POWER
PAUSE
PAUSE
PAUSE
—
REWIND
REWIND
SEARCH REVERSE
STOP
—
STOP
STOP
—
PLAY
PLAY
PLAY
—
FAST FORWARD
CURSOR RING UP
CURSOR RING DOWN
CURSOR RING RIGHT
CURSOR RING LEFT
FAST FORWARD
CURSOR UP
CURSOR DOWN
CURSOR RIGHT
CURSOR LEFT
SEARCH FORWARD
CURSOR UP
—
CURSOR UP
CURSOR DOWN
CURSOR RIGHT
CURSOR DOWN
CURSOR RIGHT
CURSOR LEFT
CURSOR LEFT
MENU
OK Button
PROGRAM; MENU
EXIT
MENU
(also, GUIDE for satellite receivers/DSS)
STATUS/EXIT
MENU/SELECT
CH +
EXIT
EXIT
SELECT
SELECT
SELECT
CHANNEL UP
CHANNEL DOWN
NUMBER SELECTION (0–9)
NEXT
CHANNEL UP
CHANNEL DOWN
NUMBER SELECTION (0–9)
—
CH –
PREVIOUS
NUMBER Buttons (0–9)
A/CH* and TV/VCR
NUMBER SELECTION (0–9)
—
TV/VCR, A/CH*
RECORD
REC, SAP
(Press with PLAY Button)
—
—
BACK LIGHT**
BACK LIGHT**
BACK LIGHT**
BACK LIGHT**
*A/CH (Alternate Channel) allows you to switch between the currently viewed channel and the previously viewed channel.
**Press the BACK LIGHT button to light the white buttons on the remote.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING THE AV AND SOURCE SELECT BUTTONS
DN
UP
SOUND
PICTURE
he AV button on the remote control and
TSOURCE SELECT button on the TV
allow you to access the TV’s signal-source
inputs. With each press of the AV button you
can access a different signal-source input.
The signal-source input jacks are located on
the back and side panels of your TV. (See
pages 6 and 7.)
10
AV1
Selecting a Signal Source
Using the AV Button
on the Remote Control
Press the AV button on the remote control as
many times as necessary to select the signal
source you want to watch.
POWER
CVI
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
Selecting a Signal Source
Using the Source Select
CONTROL FREEZE
DN
UP
PICTURE
SOUND
Button on theTV
Press the SOURCE SELECT button on the TV
as many times as necessary to select the signal
source you want to watch.
MENU/
STATUS/
SELECT
EXIT
AV2
AV3
AV4
AV5
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
AV
Button
REC •
SLEEP
FORMAT
SAP
AV
DOLBY V PROG.LIST
POSITION
PIP
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING AUTOSOUND™
DN
UP
SOUND
PICTURE
ou can use the AutoSound™ options to
Yautomatically tailor the TV’s sound for
the type of program you are watching. The
factory has set the VOICE, MUSIC, and
THEATRE options. The settings for the PER-
SONAL option are the ones you select
PERSONAL
TREBLE
BASS
49
49
VOICE
TREBLE
BASS
56
47
through the on-screen SOUND submenu. See
descriptions of the options below, right.
Press the SOUND button on the
remote control. The current
AutoSound™ setting will appear on
screen. Press the SOUND button
repeatedly to cycle through the four
options: PERSONAL, VOICE,
MUSIC, or THEATRE.
1
POWER
MUSIC
TREBLE
BASS
63
69
TV
VCR
PIP CH
ACC
ACTIVE
SWAP
CONTROL FREEZE
1
2
When you see the option you want
on the screen, press the
STATUS/EXIT button to exit the
menu. The AutoSound™ option you
selected is then active.
DN
UP
PICTURE
SOUND
2
MENU/
SELECT
STATUS/
EXIT
THEATRE
MUTE
VOL
CH
TREBLE
BASS
59
59
HELPFUL HINTS
1
4
7
2
5
8
0
3
• AutoSound™ works only with the pro-
grams coming through the ANTENNA
IN 75Ω jack on the rear of the TV.
AutoSound™ will not control the sound
levels of the other jacks on the rear or
side of the TV.
6
9
TV/VCR
A/CH
SURF
AutoSound™ Options
PERSONAL presents the TV’s sound
according to the TREBLE and BASS set-
tings you make within the SOUND sub-
menu.
POSITION
PIP
• If you select an AutoSound™ option
other than PERSONAL, then the TRE-
BLE and BASS settings specific to that
option will also be written to the
VOICE brings voices to the forefront and
emphasizes them. Moves music to the
background.
SOUND submenu items. At that point,
the PERSONAL AutoSound™ option
settings will not be changed. Only when
you go into the SOUND submenu and
change the TREBLE and BASS settings
will those settings be reflected in the
PERSONAL AutoSound™ option.
MUSIC emphasizes music over voices.
THEATRE provides a balance between
voices and music.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING AUTOPICTURE™
DN
UP
SOUND
PICTURE
ou can use an AutoPicture™ option to
Yautomatically tailor the TV’s picture for
certain types of input signals. The factory
has set the MOVIES, SPORTS, WEAK SIG-
NAL, and MULTIMEDIA options. The set-
tings for the PERSONAL option are the ones
you select through the on-screen PICTURE
submenu.
PERSONAL
MOVIES
BRIGHTNESS
COLOR
PICTURE
48
41
81
46
BRIGHTNESS
COLOR
PICTURE
50
50
50
84
SHARPNESS
SHARPNESS
Press the PICTURE button on the
remote control. The current
AutoPicture™ setting will appear on
screen. Then Press the PICTURE but-
ton repeatedly to cycle through the
options: PERSONAL, MOVIES,
SPORTS, WEAK SIGNAL, and
MULTIMEDIA picture settings.
1
POWER
SPORTS
BRIGHTNESS
COLOR
PICTURE
50
55
60
70
TV
VCR
PIP CH
ACC
ACTIVE
SHARPNESS
SWAP
CONTROL FREEZE
1
DN
UP
PICTURE
When you see the option you want
on screen, press the STATUS/EXIT
button to turn off the on-screen dis-
play. The AutoPicture™ option you
selected is then active.
SOUND
2
2
MENU/
SELECT
STATUS/
EXIT
WEAK SIGNAL
BRIGHTNESS
COLOR
PICTURE
50
40
40
28
MUTE
VOL
CH
SHARPNESS
1
4
7
2
5
8
0
3
6
HELPFUL HINT
If you select an AutoPicture™ setting
option other than PERSONAL, then the
BRIGHTNESS, COLOR, PICTURE, and
SHARPNESS settings specific to that
option will also be written to the PICTURE
submenu items. At that point, the PERSON-
AL AutoPicture™ option settings will not
be changed. Only when you go into the
PICTURE submenu and change the settings
will those settings be reflected in the PER-
SONAL AutoPicture™ option.
9
TV/VCR
MULTIMEDIA
A/CH
SURF
BRIGHTNESS
COLOR
PICTURE
50
40
40
70
POSITION
PIP
SHARPNESS
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING AUTOSURF™
DN
UP
SOUND
PICTURE
fter you set up a list of your favorite sig-
Anal sources in the SURF list, you can
press the SURF button to see the list and
quickly tune to a favorite signal source.
Place up to 10 signal sources in the SURF
LIST.
12
SURF
12
SURF
12
ADD?
12
DELETE?
SURF LIST EMPTY
Press the NUMBER buttons,
CH(annel) +/– buttons, or the AV
button to select a signal source to add
to the Surf list.
1
24
24
7
POWER
SURF
Press the SURF button. The Surf list
box appears. The number of the cur-
rent signal source is shown with
ADD? to the right. (If you have not
added any channels to the list, “SURF
LIST EMPTY” appears on screen.)
Press the CURSOR RING RIGHT to
add the signal source to the Surf list.
12
24
2
ADD?
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
Press the NUMBER buttons,
CH(annel) +/– buttons, or the AV
button to select another signal source
to add to the Surf list. Press the SURF
button and then the CURSOR RING
RIGHT to add the signal source to the
list.
SURF
12
1,3
3
24
DELETE?
MUTE
VOL
CH
1,3
1
4
7
2
5
8
0
3
6
Repeat this step, filling the list with
up to 10 favorite signal sources.
NOTE: If you exceed 10 signal
sources, the first signal source on the
list will be deleted from the list.
9
SURF
TV/VCR
A/CH
SURF
8
11
15
4
REC •
SLEEP
FORMAT
To tune to a favorite signal source
from the list, press the SURF but-
ton. The Surf list box appears. Press
the SURF button or the CURSOR
RING DOWN or UP as many times as
necessary to tune to the signal source.
SAP
AV
DOLBY V PROG.LIST
7
DELETE?
4
2,4,
5
POSITION
PIP
1,3
To delete a signal source from the
list, press the SURF button. The
Surf list box appears. Press the SURF
button or the CURSOR RING DOWN
or UP as many times as necessary to
select the signal source to be deleted.
Then press the CURSOR RING
5
RIGHT to delete the signal source.
HELPFUL HINT
Five signal sources can be shown in the Surf
list box at one time. Press the CURSOR
RING UP or DOWN to show any other sig-
nal sources that are in the list.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING PROGRAM LIST AND ALTERNATE CHANNEL
DN
UP
SOUND
PICTURE
POWER
PROGRAM LIST
PROGRAM LIST
71 - - - - -
72 - - - - -
98 - - - - -
AV 1 - - - - -
CVI - - - - -
Press the Program List button on
the remote control to display a list of
channel numbers and their names (see
the “Tuner Mode” “Auto Program,”
“Channel Edit,” and “Name” sections
on pages 5 and 7 in the Quick Use
and Setup Guide that came with your
TV for proper setup).
V
VCR
PIP CH
ACC
ACTIVE
1
CONTROL FREEZE
2
DN
UP
PICTURE
SOUND
A padlock image will appear to the
right of a channel or signal source
that is being blocked by AutoLock™.
MENU/
SELECT
STATUS/
EXIT
You can also access the Program List
by pressing the button in the center of
the Cursor Ring. Each channel will
appear as a selectable item. The cur-
rent channel will be highlighted by
default. Only five channels will be
shown in the list at one time.
MUTE
3
VOL
CH
PROGRAM LIST
7
8
9
- - - - -
- - - - -
- - - - -
1
4
7
2
5
8
0
3
6
10 - - - - -
11 - - - - -
9
TV/VCR
Press the CURSOR RING UP or
DOWN to go through the list and and
highlight a channel.
A/CH
SURF
2
3
REC •
SLEEP
1
FORMAT
SAP
Press the CURSOR RING RIGHT
to tune to the highlighted channel.
Channels marked “Skipped” in the
“Channel Edit” control will not
AV
DOLBY V PROG.LIST
POSITION
PIP
appear in the list. Any channel that is
being blocked by AutoLock™ will
appear with a padlock icon to indicate
that the channel is not viewable.
Watch channel
POWER
5
ALTERNATE CHANNEL (A/CH)
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
You can press the A/CH button on your
remote control to go back and forth between
the current channel and one previously
watched channel.
DN
UP
PICTURE
SOUND
Change channel
MENU/
SELECT
STATUS/
EXIT
Watch new channel
10
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
Press A/CH button
to return to previously
watched channel
A/CH
SURF
POSITION
PIP
A/CH
Button
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
C
O
N
T
R
O
L
F
R
E
E
Z
E
USING THE SLEEP TIMER CONTROL
DN
UP
SOUND
PICTURE
ave you ever fallen asleep in front of the
HTV? You can program your TV to turn
off while you sleep. The Sleep Timer feature
allows you to set your TV to turn off within a
certain amount of time: 15, 30, 45, 60, 90,
120, 180, or 240 minutes.
SLEEP OFF
Press the SLEEP button on the remote con-
trol. (The SLEEP Timer on-screen display
will appear on screen.) Then within five
seconds, press the SLEEP button again as
many times as necessary to select the
amount of time you want to pass before the
TV will turn itself off.
SLEEP 15
The SleepTimer options are 15, 30, 45,
60, 90, 120, 180, or 240 minutes.
POWER
An on-screen countdown will appear during
the last minute before the TV turns off. Ten
seconds before the Sleep Timer turns the TV
off, the on-screen display will show “Good
Bye.”
TV
SWAP
VCR
ACC
ACTIVE
PIP CH
CONTROL FREEZE
DN
UP
PICTURE
SOUND
TV SWITCHING OFF 59
HELPFUL HINTS
MENU/
SELECT
STATUS/
EXIT
• To see how many minutes remain before
the TV shuts itself off, press the
STATUS/EXIT button.
During the last minute of a SleepTimer
setting, an onscreen countdown will be
displayed.
MUTE
VOL
CH
• Changing the channel or volume during
the last minute of a Sleep Timer will
cancel Sleep.
1
4
7
2
5
8
0
3
6
GOOD BYE
9
TV/VCR
SLEEP
Button
TV SWITCHING OFF 9
A/CH
SURF
REC •
SLEEP
FORMAT
SAP
During the last 10 seconds of a Sleep
Timer setting, "GOOD BYE" will be
displayed on screen.
AV
DOLBY V PROG.LIST
POSITION
PIP
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Picture
ADJUSTING THE PICTURE CONTROLS
o adjust your TV picture controls, select a
Tchannel and follow these steps. See descrip-
tions of the picture-adjustment options below.
PICTURE
BRIGHTNESS
COLOR
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
30
30
30
30
0
Press the MENU/SELECT button on
PICTURE
SHARPNESS
TINT
the remote control to show the on-screen
menu.
1
2
3
Press the CURSOR RING RIGHT.
BRIGHTNESS will be highlighted and an
adjustment bar will be shown to the right.
POWER
PICTURE
Press the CURSOR RING RIGHT or
LEFT to adjust the BRIGHTNESS level
of the picture. Or press the CURSOR
RING DOWN to select another picture
control to adjust.
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
TV
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
SWAP
DN
UP
2,3
1
Press the STATUS/EXIT button to exit
the menu.
PICTU
SOUND
4
MENU/
SELECT
STATUS/
EXIT
PICTURE
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
MUTE
VOL
CH
Picture-adjustment Options
Remember, when the bar scale is centered
, the control settings are at nor-
mal, mid-range levels. Picture adjustments
are described as follows:
4
1
4
7
2
5
8
0
3
6
PICTURE
9
BRIGHTNESS adds or subtracts light from
the darkest part of the picture.
TV/VCR
A/CH
SURF
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
COLOR adds or eliminates color.
POSITION
PIP
PICTURE improves the detail of the lightest
parts of the picture.
SHARPNESS improves the detail in the
picture.
PICTURE
TINT adjusts the picture to obtain natural
skin tones.
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
COLOR TEMP offers NORMAL, COOL,
or WARM picture preferences.
NORMAL keeps whites, white.
WARM makes whites, reddish.
COOL makes whites, bluish.
PICTURE
COLOR
PICTURE
SHARPNESS
TINT
COLOR TEMP
NORMAL
OR
OR
COLOR TEMP
COLOR TEMP
WARM
COOL
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Picture
SETTING THE EYE FIDELITY CONTROL
ye Fidelity gives you a choice between
Etwo different scanning techniques—pro-
gressive or interlaced.
PICTURE
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
Progressive scan doubles the number of pic-
ture lines, eliminating line flicker and pro-
viding a jitter-free picture.
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
30
Interlaced improves the appearance of on-
screen motion. It also helps smooth out
jagged lines that are sometimes seen on
curved and angled surfaces in the picture.
POWER
PICTURE
Press the MENU/SELECT button
on the remote to show the on-screen
menu.
PICTURE
SHARPNESS
TINT
COLOR TEMP
EYE FIDELITY
1
TV
VCR
PIP CH
ACC
ACTIVE
Press the CURSOR RING RIGHT
to enter the PICTURE submenu.
PROGRESSIVE
INTERLACED
SWAP
CONTROL FREEZE
DN
UP
2,4
1
2
PICTU
SOUND
OR
Press the CURSOR RING DOWN
repeatedly until the EYE FIDELITY
control is highlighted.
5
EYE FIDELITY
MENU/
STATUS/
3
SELECT
EXIT
Press the CURSOR RING RIGHT
MUTE
or LEFT until you select the option
you want, either PROGRESSIVE or
INTERLACED.
CH
4
3
1
4
7
2
5
8
0
3
6
Press the STATUS/EXIT button to
turn the menu off.
5
9
TV/VCR
A/CH
SURF
POSITION
PIP
HELPFUL HINT
• The Eye Fidelity control is not available
for use with AV4 and AV5.
• You may want to use the interlaced
option to enhance programs containing a
lot of motion.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Picture
SETTING THE DYNAMIC CONTRAST CONTROL
he Dynamic Contrast control allows you
Tto sharpen the picture quality by making
dark portions of the picture darker and light
portions of the picture more noticeable.
Normally, you will probably want to select
MED. In certain circumstances, however,
you may prefer MIN or MAX.
PICTURE
BRIGHTNESS
COLOR
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
30
PICTURE
SHARPNESS
TINT
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
PICTURE
POWER
SHARPNESS
TINT
COLOR TEMP
EYE FIDELITY
DYN. CONTRAST
Press the CURSOR RING RIGHT
to enter the PICTURE submenu.
2
ON
TV
VCR
PIP CH
ACC
Press the CURSOR RING DOWN
repeatedly until the DYN. CON-
TRAST control is highlighted.
ACTIVE
MIN
SWAP
CONTROL FREEZE
DN
UP
3
2,4
1
PICTU
SOUND
OR
DYN. CONTRAST
5
Press the CURSOR RING RIGHT
or LEFT until you select the option
you want: MIN, MED, or MAX.
MED
MAX
OFF
MENU/
SELECT
STATUS/
EXIT
4
5
OR
DYN. CONTRAST
OR
Press the STATUS/EXIT button to
exit the menu.
MUTE
CH
3
DYN. CONTRAST
1
4
7
2
5
8
0
3
6
HELPFUL HINT
9
TV/VCR
A/CH
SURF
The Dynamic Contrast control is not avail-
able for use with the AV4 and AV 5 signal
POSITION
PIP
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Picture
ADJUSTING THE MANUAL CONVERGE CONTROLS: CONVERGE RED/BLUE
s explained in the Quick Use and Setup
AGuide, your projection TV has three color
projection tubes: one for red, one for green, and
one for blue. When mixed in proper proportion,
the beams of light coming from the tubes can
produce any color. To create a clear picture,
however, these color beams must be precisely
aligned. This alignment is called convergence.
Bumps and vibrations, moving the set, or the
presence of magnetic fields can cause the color
beams to become improperly aligned, or mis-
converged, resulting in a fuzzy picture. Using
the Auto IntelliSense™ feature, you can auto-
matically adjust convergence in 20 seconds or
less. See page 7 in the Quick Use and Setup
Guide. Also, if you desire, you can use the
MANUAL CONVERGE controls—explained on
this page and the next—to make additional con-
vergence adjustments to suit your personal pref-
erences or to further fine-tune the picture. See
the chart to the right to determine which
PICTURE
MANUAL CONVERGE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
Converge Red
POWER
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
Converge Red
DN
UP
2,3
1
PICTU
SOUND
MANUAL CONVERGE controls to use for cur-
rent picture conditions.
MENU/
SELECT
Determining Which
Manual Converge
Control to Use
STATUS/
EXIT
NOTE: Allow the TV to warm up for 20 minutes
before adjusting convergence.
MUTE
VOL
CH
Screen
Press the MENU/SELECT button to
appearance
Action
Adjust the
show the on-screen menu. Press the
CURSOR RING RIGHT to enter the
PICTURE submenu. Then press the
CURSOR RING DOWN repeatedly until
MANUAL CONVERGE is highlighted.
1
1
4
7
2
5
8
0
3
6
CONVERGE
RED control.
Then if any red
outlines remain,
adjust the
Various
images
throughout
the entire
9
TV/VCR
Press the CURSOR RING RIGHT to
A/CH
SURF
enter the MANUAL CONVERGE
submenu. If you want to adjust the Red
picture have MULTIPOINT
red outlines. RED control.
2
POSITION
PIP
Convergence, press the CURSOR RING
RIGHT to enter the adjust mode. To
adjust the Blue Convergence, press the
CURSOR RING DOWN to highlight
CONVERGE BLUE, then press the
CURSOR RING RIGHT to enter adjust
mode.
Adjust the
CONVERGE
Various
images
throughout
the entire
BLUE control.
Then if any blue
outlines remain,
adjust the
picture have MULTIPOINT
blue outlines. BLUE control.
In adjust mode, press the CURSOR
RING RIGHT, LEFT, UP, or DOWN
to adjust the cross hair until the color
outline around it is gone. (The adjust-
ment is automatically saved in the TV’s
memory.) To return to the MANUAL
CONVERGE menu, press the
3
MENU/SELECT button. To exit the on-
screen display, press the STATUS/EXIT
button.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Picture
ADJUSTING THE MANUAL CONVERGE CONTROLS: MULTIPOINT RED/BLUE
he Multipoint Red/Blue Convergence controls
PICTURE
MANUAL CONVERGE
Tallow you to adjust picture convergence at
PICTURE
MANUAL CONVERGE
specific points on the TV screen.
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
Press the MENU/SELECT button to
show the on-screen menu. Press the
CURSOR RING RIGHT to enter the
PICTURE menu, then the CURSOR
RING DOWN repeatedly until
▲
MULTIPOINT BLUE
SAVE MULTIPOINT
É
to Navigate Exit to Adjust
to Adjust Exit to Navigate
to Adjust Exit to Navigate
1
2
POWER
MANUAL CONVERGE is highlighted.
Press the CURSOR RING RIGHT to
enter the MANUAL CONVERGE sub-
menu. Press the CURSOR RING DOWN
repeatedly until MULTIPOINT RED or
MULTIPOINT BLUE is highlighted. Then
press the CURSOR RING LEFT or
RIGHT to enter Navigate mode.
TV
SWAP
VCR
PIP CH
ACC
to Navigate Exit to Adjust
to Navigate Exit to Adjust
to Adjust Exit to Navigate
ACTIVE
CONTROL FREEZE
DN
UP
2
3,4
PICTU
UND
MENU/
STATUS/
SELECT
EXIT
Press the CURSOR RING LEFT,
RIGHT, UP, or DOWN to move to a
cross hair that has a color outline. Then
press the STATUS/EXIT button to enter
adjust mode.
3
4
MUTE
VOL
CH
1,5
6
1
4
7
2
5
8
0
3
Press the CURSOR RING LEFT,
RIGHT, UP, or DOWN to adjust the
cross hair until the color outline is
gone.Then press the STATUS/EXIT
button to return to NAVIGATE mode.
Repeat steps 3 and 4 until all misaligned
cross hairs have been adjusted.
PICTURE
MANUAL CONVERGE
6
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
9
TV/VCR
A/CH
SURF
▲
É
POSITION
PIP
SAVE MULTIPOINT
For your adjustments to be stored in the
TV’s memory, you must activate SAVE
MULTIPOINT.
PICTURE
MANUAL CONVERGE
PICTURE
MANUAL CONVERGE
5
NOTE: If you are not satisfied with the
adjustments you just made and want to
start over, you can use the UNDO
MULTIPOINT control. This control
allows you to undo the adjustments, but
only if you use it before saving.
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
▲
▲
STORED
OR
HELPFUL HINTS
To save your multipoint adjustments,
press the MENU/SELECT button to
return to the MANUAL CONVERGE
menu. Press the CURSOR RING DOWN
repeatedly until SAVE MULTIPOINT is
highlighted. Then press the CURSOR
RING LEFT or RIGHT to store your
adjustments in the TV’s memory.
Or, to undo the multipoint adjustments
you just made, highlight UNDO
MULTIPOINT and press the CURSOR
RING LEFT or RIGHT.
UNDO MULTIPOINT
•
The on-screen display
will disappear after 20
seconds of inactivity. If
this happens, simply
press the
PICTURE
MANUAL CONVERGE
PICTURE
MANUAL CONVERGE
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
UNDO MULTIPOINT
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
UNDO MULTIPOINT
▲
▲
MENU/SELECT
button to bring the
MANUAL
CONVERGE
submenu back.
RESTORED
OR
RESTORE FACTORY
• If you should experi-
ence a power outage
before saving your
multipoint-convergence
settings, your settings
will be lost.
PICTURE
MANUAL CONVERGE
PICTURE
MANUAL CONVERGE
Or, to restore the TV’s convergence to
factory settings, highlight RESTORE
FACTORY and press the CURSOR RING
LEFT or RIGHT.
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
UNDO MULTIPOINT
RESTORE FACTORY
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
UNDO MULTIPOINT
RESTORE FACTORY
▲
▲
RESTORED
Press the STATUS/EXIT button to
exit the menu.
6
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Sound
ADJUSTING THE TREBLE, BASS,AND BALANCE CONTROLS
esides the normal volume level control,
Byour TV also has individual sound-
adjustment controls. You can use TREBLE
(high frequency), BASS (low frequency), and
Speaker BALANCE to further adjust the
sound playback of TV programs.
SOUND
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
30
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
POWER
SOUND
Press the CURSOR RING DOWN
once to highlight SOUND.
TREBLE
BASS
2
30
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
BALANCE
AVL
.
INCR SURROUND
TV
VCR
PIP CH
ACC
3
ACTIVE
SWAP
CONTROL FREEZE
To adjust the TREBLE level of the
television’s sound, press the
CURSOR RING RIGHT or LEFT.
DN
UP
3,4
1
PICTU
SOUND
4
5
T
o adjust another sound control,
MENU/
SELECT
TATUS/
EXIT
SOUND
press the CURSOR RING DOWN
until the control (BASS or BALANCE)
is highlighted. Then press the
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
MUTE
0
CURSOR RING RIGHT or LEFT to
adjust the selected control.
CH
2,4
Press the STATUS/EXIT button to
exit the menu.
1
4
7
2
5
8
0
3
6
5
9
TV/VCR
A/CH
SURF
HELPFUL HINT
POSITION
PIP
When the bar scale is centered, speaker sound
BALANCE is centered between the TV’s left
and right side speakers.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Sound
USING THE AVL (AUDIO VOLUME LEVELER) CONTROL
ou may have noticed the peaks and val-
Yleys of sound that occur between pro-
gram changes or at commercial breaks. The
volume levels often vary considerably. By
turning on the AVL (Audio Volume Leveler)
control, you can make your TV produce a
more consistent volume level. Follow these
steps to turn the AVL control on.
SOUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
30
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
POWER
SOUND
1
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
Press the CURSOR RING DOWN
once to highlight SOUND.
OFF
ON
2
TV
VCR
PIP CH
ACC
ACTIVE
SWAP
CONTROL FREEZE
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
DN
UP
3
PICT
SOUND
3
OR
5
Press the CURSOR RING DOWN
repeatedly until AVL is highlighted.
Then press the CURSOR RING
RIGHT or LEFT to turn AVL ON or
OFF.
AVL
MENU/
SELECT
STATUS/
EXIT
4
MUTE
CH
2,4
Press the STATUS/EXIT button to
exit the menu.
1
5
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
HELPFUL HINT
POSITION
PIP
The AVL control does not function with the
Dolby* Virtual feature, so the option disap-
pears from the SOUND submenu when you
*Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Sound
SELECTING THE SURROUND-SOUND MODES
ased on the signal being received, you can
Bselect various surround-sound modes:
MONO, SPATIAL, STEREO, INCR. SUR-
ROUND, or DOLBY* VIRTUAL (Virtual
Dolby Surround). (See descriptions of the
options to the right.)
Surround-sound Modes
In stereo: select STEREO, INCR.
SURROUND, or DOLBY VIRTUAL.
1
4
7
2
5
8
0
3
6
INCR. (Incredible) SURROUND
enhances stereo programs by making the
sound broader and fuller.
9
TV/VCR
A/CH
SURF
REC •
SLEEP
DOLBY VIRTUAL (with Virtual Dolby
Surround signals) creates a virtualized sur-
round-sound experience from two speakers
using Dolby Pro Logic.* It retains all the
original multichannel audio information and
provides the listener with the sensation of
being surrounded by additional speakers.
FORMAT
Selecting a Surround-sound
Option Using the
SAP
AV
DOLBY V PROG.LIST
Remote Control
While watching TV, you can select a surround-
sound listening mode immediately by pressing the
DOLBY V button. Each press of the DOLBY V
button selects a different mode based on the TV
signal being received.
POSITION
PIP
DolbyV
Button
In mono: select MONO or SPATIAL.
SPATIAL enables you to add a surround
effect to mono programs.
Selecting a Surround-sound
Option Using theTV Buttons
Should your remote control become lost or other-
wise unavailable for use, follow the steps below to
use the buttons on the front of the TV to access the
on-screen menu and select a surround-sound
mode.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
SOUND
TREBLE
BASS
30
BALANCE
AVL
.
INCR SURROUND
Press the Volume + and – buttons
simultaneously. The on-screen menu
appears.
1
2
Press the Channel Down button to
highlight SOUND. Then press the
Volume + button to enter the SOUND
submenu.
SOUND
TREBLE
BASS
BALANCE
AVL OFF
INCR SURROUND STEREO
OR
Press the Channel Down button
repeatedly until INCR. SURROUND is
highlighted. Then press the Volume + or
– button until you select the surround-
sound mode you want.
.
.
INCR SURROUND INCR SURROUND
.
ED :
3
Or, when signals are being
broadcast inVirtual Dolby
Surround:
.
INCR SURROUND DOLBY VIRTUAL
Press the Volume + and – buttons
simultaneously and repeatedly until you
back out of the menu screens.
When signals are being broad-
cast in mono (nonstereo):
.
INCR SURROUND MONO
4
OR
.
INCR SURROUND SPATIAL
HELPFUL HINT
The AVL (Audio Volume Leveler) control does
not function with the Dolby Virtual feature, so
the option disappears from the SOUND sub-
*Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Sound
SELECTING THE STEREO/MONO SOUND MODE
ou can enjoy stereo programs on your
YTV. It has both an amplifier and twin
speakers through which stereo sound can be
heard. Follow these steps to select the
STEREO mode.
SOUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
30
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
Press the CURSOR RING DOWN
once to highlight SOUND.
POWER
SOUND
BALANCE
AVL
2
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
.
INCR SURROUND
HEADPHONE
STEREO
3
TV
VCR
PIP CH
ACC
Press the CURSOR RING DOWN
repeatedly until the STEREO control
is highlighted.
ACTIVE
CONTROL FREEZE
MONO
SWAP
DN
UP
4
3,5
PICT
SOUND
OR
6
Press the CURSOR RING RIGHT
or LEFT to select STEREO or
MONO. When STEREO has been
STEREO
STEREO
MENU/
SELECT
STATUS/
EXIT
5
selected, the television will reproduce
any stereo signal it receives.
MUTE
CH
2,4
1
Press the STATUS/EXIT button to
exit the menu.
6
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Sound
SELECTING THE SAP (SECOND AUDIO PROGRAM) FEATURE
AP, or Second Audio Program, is an addi-
Stional part of the stereo broadcast system.
Sent as a third audio channel, an SAP can be
heard apart from the current TV program sound.
TV stations are free to use SAP for any number
of purposes, such as the broadcast of a second
language or other audio information.
MENU/
STATUS/
EXIT
SELECT
MUTE
VOL
CH
1
2
5
8
0
3
If an SAP signal is not present with a selected
program, the SAP option cannot be selected.
4
6
7
TV/VCR
A/CH
9
SAP
Selecting SAP Using
Button
the Remote Control
Select SAP immediately by pressing the
SAP button on the remote control if the feature is
being made available with the program you are
watching.
REC •
SLEEP
FORMAT
SAP
AV
DOLBY V PROG.LIST
POSITION
PIP
Selecting SAP Using
theTV Buttons
Should your remote control become lost or other-
wise unavailable for use, follow the steps below to
use the buttons on the front of the TV to access the
on-screen menu and select SAP.
NOTE: SAP must be broadcast with the program
you are watching for you to be able to select the
feature.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
SOUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
AVL
INCR SURROUND
30
.
SOUND
AVL
INCR SURROUND
HEADPHONE
STEREO
Press the Volume + and – buttons
simultaneously. The on-screen menu
appears.
1
2
.
If a Second Audio Program
is being broadcast:
Press the Channel Down button to
highlight SOUND. Then press the
Volume + button to enter the SOUND
submenu.
SAP
OFF
SAP
ON
OR
SAP
OFF
Press the Channel Down button
repeatedly until SAP is highlighted.
Then press the Volume + or – button to
turn SAP on or off.
If a Second Audio Program
is not being broadcast:
3
SAP
NOT AVAILABLE
Press the Volume + and – buttons
simultaneously and repeatedly until you
back out of the menu screens.
OR
4
SAP
OFF
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Sound
USING THE BASS BOOST CONTROL
he BASS BOOST control allows you to
Tincrease the low-frequency range of the
TV’s sound. This creates a deeper, fuller
sound. Follow these steps to turn BASS
BOOST ON.
SOUND
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
.
INCR SURROUND
30
Press MENU/SELECT button on
the remote control to show the on-
screen menu.
1
Press the CURSOR RING DOWN
once to highlight SOUND.
POWER
SOUND
2
STEREO
SAP
AUDIO OUT
SPEAKERS
BASS BOOST
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
3
TV
VCR
PIP CH
ACC
Press the CURSOR RING DOWN
repeatedly until BASS BOOST is
highlighted.
ACTIVE
CONTROL FREEZE
ON
SWAP
DN
UP
4
3,5
PICT
SOUND
OR
6
Press the CURSOR RING RIGHT
or LEFT to turn BASS BOOST ON
or OFF.
BASS BOOST
OFF
MENU/
SELECT
STATUS/
EXIT
5
Press the STATUS/EXIT button to
exit the menu.
MUTE
CH
6
2,4
1
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
SETTING THE CLOCK
our TV comes with an on-screen clock. You
Ywill need to set the clock before you can use
the Timer feature. During normal operation, the
time appears on the screen when you press the
STATUS/EXIT button. You can show the time on
screen constantly by turning the TIMER DIS-
PLAY control on (see page 42).
FEATURES
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
For instructions on setting the Timer’s START
and STOP times, see page 43. Then go to pages
44 and 45 to learn how to select the Timer’s
channel and activate the Timer.
FEATURES
TIMER
TIME
POWER
NOTE: You can access the TIME (clock) feature
directly by pressing the Clock button on the
remote control.
_ _:_ _
START TIME
STOP TIME
CHANNEL
ACTIVATE
VCR
PIP CH
ACC
3,4,
ACTIVE
CONTROL FREEZE
Press the MENU/SELECT button on
7
DN
UP
the remote control to show the on-screen
menu.
5
1
PICTU
SOUND
8
6
Press the CURSOR RING DOWN
twice to highlight FEATURES.
MENU/
SELECT
STATUS/
FEATURES
TIMER
TIME
EXIT
2
8:00 PM
Press the CURSOR RING RIGHT to
enter the FEATURES submenu.
START TIME
STOP TIME
CHANNEL
ACTIVATE
MUTE
CH
3
2
1
Press the CURSOR RING RIGHT
again to shift the display left and high-
light the TIME control.
1
2
5
8
0
3
6
4
4
Press the CURSOR RING RIGHT
again to highlight the time indicator area.
7
TV/VCR
A/CH
9
5
Access theTIME (Clock) feature
directly by pressing the Clock
button on the remote control.
After doing so, follow steps 5–8
on this page to set the clock.
Clock
Button
Press the NUMBER buttons to enter
the correct time. If you make a mistake
entering the time, press the CURSOR
RING LEFT or RIGHT to move among
the input slots to make corrections.
REC •
EP
FORMAT
6
SAP
AV
DOLBY V PROG.LIST
NOTE: You can also press the CURSOR
RING UP or DOWN to cycle through
digits to input the time.
POSITION
PIP
Press the CURSOR RING UP or
DOWN to select AM or PM.
7
Press the STATUS/EXIT button to exit
the menu.
8
HELPFUL HINTS
• For single-digit entries, be sure to press 0
first and then the hour number.
• If you’d like, set the clock automatically
using the AutoChron™ feature (on page 6
in the Quick Use and Setup Guide).
• Clock settings may be lost when the TV is
unplugged or when AC power to the set is
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
DISPLAYING THE TIME
fter you have set the TV’s clock, you can
Ause your TV to keep up with the time on
screen. You can also set the timer to switch
to another channel, and, if you want, turn
the TV off. The Timer’s DISPLAY control
allows you to show the time constantly in the
upper right corner of the screen.
FEATURES
TIMER
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
FEATURES
TIMER
TIME
POWER
8:06 PM
Press the CURSOR RING DOWN
twice to highlight FEATURES.
START TIME
STOP TIME
CHANNEL
ACTIVATE
2
TV
VCR
PIP CH
ACC
Press the CURSOR RING RIGHT
to enter the FEATURES submenu.
3,4,
ACTIVE
SWAP
CONTROL FREEZE
DN
UP
3
5
PICTU
SOUND
Press the CURSOR RING RIGHT
again. Then press the CURSOR RING
DOWN repeatedly until the DISPLAY
control is highlighted.
6
4
MENU/
SELECT
STATUS/
EXIT
FEATURES
TIMER
START TIME
Press the CURSOR RING RIGHT
or LEFT to turn the TIMER DIS-
PLAY ON or OFF.
MUTE
STOP TIME
CHANNEL
ACTIVATE
DISPLAY
CH
5
6
2
1
ON
Press the STATUS/EXIT button to
exit the menu.
1
2
5
8
0
3
6
OR
4
DISPLAY
OFF
7
TV/VCR
A/CH
9
SURF
POSITION
PIP
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
SETTING THE TIMER’S START TIME AND STOP TIME
ou can set the Timer to switch to a selected
Ychannel at a specific time while you are
watching another channel, or when the TV is in
standby mode. (Standby mode is when the TV is
plugged into the wall outlet but turned off.) If
you want, you can also set the TV to turn off at
some time after the TV switches channels.
Follow the steps below to set the Timer’s
START TIME and STOP TIME.
FEATURES
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
FEATURES
TIMER
TIME
POWER
1
8:06 PM
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the CURSOR RING DOWN
twice to highlight FEATURES.
VCR
PIP CH
ACC
3,4,
2
ACTIVE
CONTROL FREEZE
7
Press the CURSOR RING RIGHT to
enter the FEATURES submenu.
DN
UP
5
PICTU
SOUND
3
9
6
Press the CURSOR RING RIGHT
again. Then press the CURSOR RING
DOWN once to highlight the START
TIME control.
MENU/
SELECT
STATUS/
FEATURES
TIMER
TIME
EXIT
4
START TIME
STOP TIME
CHANNEL
ACTIVATE
_ _:_ _
MUTE
8
Press the CURSOR RING RIGHT
to highlight the time indicator area.
1
2
5
1
4
7
2
5
8
0
3
6
Press the NUMBER buttons to enter
the correct time. If you make a mis-
take entering the time, use the CUR-
SOR RING LEFT or RIGHT to move
among the time input slots to make
corrections.
6
FEATURES
TIMER
TIME
9
TV/VCR
A/CH
SURF
START TIME
STOP TIME
CHANNEL
ACTIVATE
8:00 AM
POSITION
PIP
NOTE: You can also use the CUR-
SOR RING UP or DOWN to cycle
through digits to input the time.
Press the CURSOR RING UP or
DOWN to select AM or PM.
7
FEATURES
TIMER
TIME
Press the CURSOR RING LEFT
repeatedly until START TIME is high-
lighted. Then press the CURSOR RING
DOWN to highlight STOP TIME. If you
want the TV to switch off at some time
after the changing of channels, follow
steps 5–7 above to set the STOP TIME.
8
START TIME
STOP TIME
CHANNEL
ACTIVATE
_ _:_ _
Press the STATUS/EXIT button to exit
the menu.
FEATURES
TIMER
TIME
9
See pages 44 and 45 for instructions on selecting
the Timer’s channel and activating the timer.
START TIME
STOP TIME
CHANNEL
ACTIVATE
9:30 AM
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
SELECTING THE TIMER’S CHANNEL
ollow these steps to select the channel to
Fwhich the Timer will switch the TV.
FEATURES
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
START TIME
STOP TIME
CHANNEL
ACTIVATE
1
Press the CURSOR RING DOWN
twice to highlight FEATURES.
2
Press the CURSOR RING RIGHT to
enter the FEATURES submenu.
FEATURES
TIMER
TIME
POWER
3
Press the CURSOR RING RIGHT.
Then press the CURSOR RING
DOWN repeatedly until the CHANNEL
control is highlighted.
8:06 PM
START TIME
STOP TIME
CHANNEL
ACTIVATE
4
TV
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
SWAP
DN
UP
Press the NUMBER buttons to enter
the desired start-up channel. Or press
the CURSOR RING RIGHT repeatedly
to enter the start-up channel you want.
3,4
PICT
SOUND
5
6
5
MENU/
SELECT
STATUS/
EXIT
FEATURES
TIMER
TIME
Press the STATUS/EXIT button to
exit the menu.
START TIME
STOP TIME
CHANNEL
ACTIVATE
MUTE
6
VOL
5
1
2
NOTE: Before the Timer will work, you
must activate it. See page 45.
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
SETTING THE TIMER’S ACTIVATE CONTROL
fter you have set the TIME, START
ATIME, STOP TIME, and CHANNEL,
you must activate the Timer for it to operate.
Your options are to set the Timer to work
ONCE or DAILY. Set ACTIVATE to OFF if
you don’t want to use the Timer.
FEATURES
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
FEATURES
TIMER
TIME
POWER
Press the CURSOR RING DOWN
twice to highlight FEATURES.
8:06 PM
2
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the CURSOR RING RIGHT
to enter the FEATURES submenu.
TV
VCR
PIP CH
ACC
3,4,
ACTIVE
3
SWAP
CONTROL FREEZE
DN
UP
Press the CURSOR RING RIGHT
again. Then press the CURSOR RING
DOWN repeatedly until the ACTI-
VATE control is highlighted.
5
PICTU
SOUND
4
6
MENU/
SELECT
STATUS/
FEATURES
TIMER
TIME
EXIT
Press the CURSOR RING RIGHT
to cycle through the options and make
your selection. The options are
ONCE, DAILY, or OFF.
START TIME
STOP TIME
CHANNEL
ACTIVATE
MUTE
5
VOL
1
2
ONCE
Press the STATUS/EXIT button to
exit the menu.
1
4
7
2
5
8
0
3
6
6
OR
OR
ACTIVATE
ACTIVATE
DAILY
OFF
9
TV/VCR
A/CH
SURF
POSITION
PIP
HELPFUL HINT
• Changing the channel or adjusting the
volume during the last minute of a Timer
setting will cancel the shutting off of the
TV.
• Thirty seconds before the set changes to
the channel you set (see page 44), an
announcement appears on screen.
CHANGING TO
CHANNEL 5
IN 29 SEC
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
UNDERSTANDING AUTOLOCK™
he AutoLock™ feature can help par-
Tents control what their children watch
on TV. AutoLock™ does this by using the
content advisories sent by broadcasters
or other program providers. After you
program AutoLock™, it can respond to
the content advisories and block pro-
grams that contain content that you may
consider objectionable—offensive lan-
guage, violence, or sexual situations. You
can also use AutoLock™ to block chan-
nels that you don’t want your children to
watch.
AutoLock
MOVIE RATING
AutoLock
TV RATING
TV-Y
G
PG
PG-13
R
NC-17
ON
ON
TV-Y7
TV-G
TV-PG
TV-14
MOVIE RATINGS
TV PARENTAL GUIDELINES
In this section, you’ll learn how to block
channels and programming that is not
rated, is unrated, or has no rating. You
will also find out how to turn these block-
ing features on or off. Following on this
page are brief explanations of
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
G (General Audience)—all ages
admitted. Most parents will find pro-
grams that are rated G to be suitable
for children of all ages. Such programs
have little or no violence, no strong
language, and little or no sexual dialog
or sexual situations.
TV-Y (All Children)—designed to
be appropriate for all children,
especially ones ages 2–6. Programs
TV
Y
rated TV-Y are not expected to frighten
younger children.
AutoLock™ terms and program ratings.
TV-Y7 (Directed to Older
Children)—designed for children
ages 7 and older. Programs rated
TV
Terms
PG (Parental Guidance
BLOCKING control—can be thought
of as the “master switch” for
Suggested)—contain material that par-
ents may find unsuitable for younger
children. Programs that are rated PG
have one or more of the following: mod-
erate violence, some sexual situations,
infrequent coarse language, or some
suggestive dialog.
TV-Y7 may be more appropriate for chil-
dren who have acquired the development
skills needed to distinguish between
make-believe and reality. Such programs
may include mild fantasy and comic vio-
lence (FV).
AutoLock™. This control affects the set-
tings you have chosen for blocking pro-
grams according to movie ratings or TV
ratings, or for blocking programs that
have no rating or are unrated. When the
BLOCKING control is OFF, the blocking
or censoring of programs is disabled.
When the BLOCKING control is ON,
blocking will occur according to the set-
tings you have chosen.
TV-G (General Audience)—most
parents will consider programs that
are rated TV-G to be suitable for
TV
G
PG-13 (Parents Strongly
Cautioned)—contain material that par-
ents may find unsuitable for children
under the age of 13. Programs that are
rated PG-13 have one or more of the
following: violence, sexual situations,
coarse language, or suggestive dialog.
children of all ages. Such programs have
little or no violence, no strong language,
and little or no sexual dialogue or sexual
situations.
BLOCK UNRATED control—if set to
ON, blocks all unrated programs.
TV
TV-PG (Parental Guidance
Suggested)—contain material that
parents may find unsuitable for
Unrated programming consists of the
kind of shows that the MPAA (Motion
Picture Association of America) or the
TV broadcasters have chosen not to rate.
R (Restricted)—specifically designed
for adults. Anyone under the age of 17
should view programs that are rated R
only with an accompanying parent or
adult guardian. Such programs have one
or more of the following: intense vio-
lence; intense sexual situations; strong,
coarse language; or intensely suggestive
dialogue.
younger children. This type of program-
ming has one or more of the following:
moderate violence (V), some sexual situ-
ations (S), infrequent coarse language
(L), or some suggestive dialogue (D).
NO RATING control—if set to ON,
blocks all programming with no content
advisory data.
Programming that has No Rating is not
encoded with any rating information
from the MPAA or the Parental
Guidelines. Any programming could fall
into this category.
TV
TV-14 (Parents Strongly
Cautioned—contain material that
many parents will find unsuitable
NC-17 (No one under the age of 17
will be admitted)—should be viewed
by adults only. Programs that are rated
NC-17 have graphic violence; explicit
sex; or crude, indecent language.
for children under 14 years of age. Such
programs have one or more of the follow-
ing: intense violence (V); intense sexual
situations (S); strong, coarse language
(L); or intensely suggestive dialogue (D).
BLOCK CHANNEL control—enables
you to block individual channels that you
don’t want children to see.
X (Adults Only)—contain one or more
of the following: very graphic violence,
very graphic and explicit or indecent
sexual acts, or very coarse and intensely
suggestive language.
TV TV-MA (Mature Audience Only)—
specifically designed to be viewed by
adults and therefore may be unsuit-
able for children under 17. Such programs
have one or more of the following: graphic
violence (V); explicit sexual situations (S);
or crude, indecent language (L).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
SETTING UP THE AUTOLOCK™ ACCESS CODE
our AutoLock™ access code allows
Yyou to enter the AutoLock™ submenus
to set up or turn off blocking. Your access
code is also the “key” that unlocks pro-
grams or channels that are being blocked
by AutoLock™.
FEATURES
FEATURES
TIMER
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the MENU/SELECT button
on the remote control to show the
on-screen menu.
FEATURES
POWER
FEATURES
1
2
3
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
Press the CURSOR RING DOWN
twice to highlight
FEATURES.
TV
VCR
PIP CH
ACC
ACTIVE
SWAP
CONTROL FREEZE
DN
UP
3,4
Press the CURSOR RING
PICT
SOUND
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AutoLock control.
MENU/
SELECT
STATUS/
FEATURES
FEATURES
TIMER
EXIT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
INCORRECT
AutoLock
PIP
CLOSED CAP
FORMAT
MUTE
Press the CURSOR RING
RIGHT to highlight ACCESS
CODE.
VOL
4
5
6
7
8
9
1
2
9
1
4
7
2
5
8
0
3
6
Press 0,7,1,1 on the remote control.
INCORRECT will appear on the
screen.
FEATURES
FEATURES
9
TV/VCR
A/CH
SURF
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ENTER
NEW CODE
- - - -
Press 0,7,1,1 on the remote control
again. ENTER NEW CODE will
appear on the screen.
POSITION
PIP
5,6,
7,8
Enter a new four-digit code using
the number buttons. CONFIRM
CODE will appear on the screen.
FEATURES
FEATURES
Enter your new four-digit code
again. CORRECT will flash on the
screen briefly.
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ENTER
NEW CODE
X X X X
CONFIRM
CODE
- - - -
Press the STATUS/EXIT button
exit the menu.
FEATURES
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
CONFIRM
CODE
X X X X
CONFIRM
CODE
X X X X
HELPFUL HINTS
• An X appears on screen to confirm the
receipt of each digit by the TV as you
input your AutoLock™ access code.
CORRECT
• Parents, it isn’t possible for your child
to unblock a channel without knowing
your access code or changing it to a
new one. If you discover that your
access code has been changed, you can
assume that blocked channels may
have been viewed.
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
You can also set up a new
access code from the main
AutoLock submenu using
the SETUP CODE option.
Simply enter and confirm
the new Code to activate it.
BLOCK CHANNEL
SETUP CODE
MOVIE RATING
TV RATING
ENTER
NEW CODE
X X X X
CONFIRM
CODE
X X X X
SETUP CODE
MOVIE RATING
TV RATING
BLOCK OPTIONS
BLOCK OPTIONS
CORRECT
47
Download from Www.Somanuals.com. All Manuals Search And Download.
USING AUTOLOCK™ TO BLOCK CHANNELS
fter you have set up your personal
Aaccess code (see page 47), you are
ready to select the channels or program
sources you want to block.
FEATURES
TIMER
FEATURES
TIMER
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU/SELECT button
on the remote control to show the
on-screen menu.
1
Press the CURSOR RING DOWN
twice to highlight
FEATURES.
FEATURES
FEATURES
POWER
2
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
Press the CURSOR RING
3,4,
VCR
PIP CH
ACC
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AutoLock control.
ACTIVE
CONTROL FREEZE
3
7
D
UP
6,8
PIRE
SOUND
Press the CURSOR RING
MENU/
SELECT
STATUS/
EXIT
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
RIGHT again to highlight ACCESS
CODE.
4
5
1
2
3
4
5
1
2
3
4
5
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
MUTE
Enter your four-digit ACCESS
CODE. CORRECT will flash very
briefly and the submenu will move
to the left with BLOCK CHANNEL
highlighted.
VOL
1
2
9
BLOCK OPTIONS
BLOCK OPTIONS
1
4
7
2
5
8
0
3
6
Press the CURSOR RING
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
9
TV/VCR
RIGHT to highlight the TV’s avail-
able channels.
A/CH
SURF
6
1
2
3
4
5
2
3
4
5
6
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
POSITION
PIP
Press the CURSOR RING UP or
DOWN to highlight the channel
you want to block.
5
BLOCK OPTIONS
BLOCK OPTIONS
7
Press the CURSOR RING
RIGHT to block the channel. A
padlock image will appear to the
right of the channel number. If you
decide you don’t want to block the
channel, press the CURSOR RING
RIGHT again to remove the block.
(The padlock image goes away.)
8
FEATURES
AutoLock
BLOCK CHANNEL
2
3
4
5
6
SETUP CODE
MOVIE RATING
TV RATING
BLOCK OPTIONS
Repeat steps 7 and 8 for any channels you
want to block from viewing.
To block all channels at once, highlight ALL in the channel list.Then press
the CURSOR RING RIGHT to block. Remove the blocks the same way.
NOTE: You can highlight the ALL option,
then press the CURSOR RING RIGHT to
block all channels at once. Or press the
CURSOR RING RIGHT to unlock all
channels.
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
ALL
1
2
ALL
1
2
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
Press the STATUS/EXIT button
to exit the menu.
3
3
BLOCK OPTIONS
BLOCK OPTIONS
4
4
9
HELPFUL HINT
You can use the BLOCK CHANNEL con-
trol to prevent the viewing of programs com-
ing from a VCR, DVD, or other accessory
device connected to any of the audio/video
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING AUTOLOCK™ TO BLOCK BY MOVIE RATING
fter you have set your personal access
Acode (see page 47), you can block
FEATURES
TIMER
FEATURES
programs by specific movie ratings.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FORMAT
TIME
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the MENU/SELECT
button on the remote control to
show the on-screen menu.
1
2
3
Press the CURSOR RING DOWN
twice to highlight
FEATURES.
POWER
FEATURES
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AutoLock control.
ACC
3,4,
VCR
PIP CH
ACTIVE
CONTROL FREEZE
8
D
UP
7
PIRE
SOUND
9
Press the CURSOR RING
MENU/
SELECT
STATUS/
EXIT
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
RIGHT again to highlight
ACCESS CODE.
4
5
2
3
4
5
6
G
PG
PG-13
R
NC-17
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
MUTE
Enter your four-digit ACCESS
CODE. CORRECT will flash very
briefly in red and the submenu will
move to the left with BLOCK
CHANNEL highlighted.
CH
2,6
1
BLOCK OPTIONS
BLOCK OPTIONS
1
4
7
2
5
8
0
3
6
AutoLock
MOVIE RATING
AutoLock
MOVIE RATING
9
Press the CURSOR RING DOWN
repeatedly until MOVIE RATING is
highlighted.
TV/VCR
A/CH
SURF
G
PG
PG-13
R
NC-17
G
PG
PG-13
R
NC-17
OFF
AV3
ALL
1
ON
AV3
ALL
1
6
7
POSITION
PIP
5
Press the CURSOR RING
2
2
RIGHT and the Rating submenu
will shift to the left with G high-
lighted.
Press the CURSOR RING UP or
DOWN to highlight each rating you
want. Then press the CURSOR
RING RIGHT to turn the rating ON
or OFF. Turning the rating ON will
block such programs from being
seen.
8
Press the STATUS/EXIT button
to exit the menu.
9
HELPFUL HINT
When a rating is set to be turned on
(blocked), all higher ratings will also be
blocked automatically. For example, if the
R rating is turned on, the NC-17 and X
ratings also will be turned on.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING AUTOLOCK™ TO BLOCK BY TV RATING
ou also can block programs by specific
YTV ratings. Follow these simple steps.
FEATURES
TIMER
FEATURES
TIMER
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU/SELECT
button on the remote control to
show the on-screen menu.
1
2
3
Press the CURSOR RING
DOWN twice to highlight
FEATURES.
POWER
FEATURES
TIMER
FEATURES
TIMER
ACCESS CODE
- - - -
ACCESS CODE
X X X X
Press the CURSOR RING
3,4,
AutoLock
PIP
CLOSED CAP
FORMAT
AutoLock
PIP
CLOSED CAP
FORMAT
RIGHT. Then press the CURSOR
RING DOWN once to highlight
the AutoLock control.
ACC
7,9,
10
TV
VCR
PIP CH
ACTIVE
SWAP
CONTROL FREEZE
DN
UP
PIRE
SOUND
Press the CURSOR RING
11
RIGHT again to highlight
ACCESS CODE.
4
MENU/
SELECT
STATUS/
EXIT
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
2
3
4
5
6
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
Enter your four-digit ACCESS
CODE.
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
MUTE
CH
5
2,6,
1
Press the CURSOR RING
DOWN repeatedly until TV
RATING is highlighted.
BLOCK OPTIONS
BLOCK OPTIONS
2
5
8
0
3
8
6
4
6
Press the CURSOR RING
RIGHT to enter the TV RATING
submenu.
AutoLock
AutoLock
7
TV/VCR
A/CH
9
TV RATING
TV-Y
TV-Y7
TV RATING
TV-Y
TV-Y7
SURF
7
OFF
AV3
ALL
1
ON
AV3
ALL
1
POSITION
PIP
TV-G
TV-PG
TV-14
TV-G
TV-PG
TV-14
Press the CURSOR RING
DOWN or UP to select a rating.
5
2
2
8
Press the CURSOR RING
RIGHT or LEFT to turn the
block on the rating ON or OFF.
9
NOTE: More-specific subratings
(for violence, sexual content, dia-
logue, or fantasy violence) are
available for TV-Y7, TV-PG, TV-
14, and TV-MA.
TV-Y (All Children)—designed to be appropriate for all children, especially ones ages 2–6.
Programs rated TV-Y are not expected to frighten younger children.
To access these subratings, press
the CURSOR RING RIGHT.
Press the CURSOR RING UP or
DOWN to select the subrating that
you want to block or unblock.
Then press the CURSOR RING
RIGHT or LEFT button to turn the
block on the subrating ON or OFF.
TV-Y7 (Directed to Older Children)—designed for children ages 7 and older. Programs rated
TV-Y7 may be more appropriate for children who have acquired the development skills needed to
distinguish between make-believe and reality. Such programs may include mild fantasy and comic
violence (FV).
10
TV-G (General Audience)—likely to be considered suitable for children of all ages. Such
programs have little or no violence, no strong language, and little or no sexual dialogue or sexual
situations.
TV-PG (Parental Guidance Suggested)—contain material that parents may find unsuitable for
younger children. This type of programming has one or more of the following: moderate violence
(V), some sexual situations (S), infrequent coarse language (L), or some suggestive dialogue (D).
Press the STATUS/EXIT button
to exit the menu.
11
TV-14 (Parents Strongly Cautioned)—contain material that many parents will find unsuitable
for children under 14 years of age. Such programs have one or more of the following: intense vio-
lence (V); intense sexual situations (S); strong, coarse language (L); or intensely suggestive
dialogue (D).
TV-MA (Mature Audience Only)—specifically designed to be viewed by adults and therefore
may be unsuitable for children under 17. Such programs have one or more of the following:
graphic violence (V); explicit sexual situations (S); or crude, indecent language (L).
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
TURNING THE AUTOLOCK™ BLOCKING CONTROL ON OR OFF
he BLOCKING control can be thought
Tof as the “master switch” for
AutoLock™. Use it to turn ON or OFF all
of the settings (based on ratings). This
control does not affect channel blocks (see
page 48).
FEATURES
TIMER
FEATURES
TIMER
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU/SELECT button
on the remote control to show the
on-screen menu.
POWER
FEATURES
FEATURES
1
2
3
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
Press the CURSOR RING DOWN
twice to highlight
FEATURES.
3,4,
TV
VCR
PIP CH
ACC
ACTIVE
SWAP
CONTROL FREEZE
DN
UP
7,8
Press the CURSOR RING
PIRE
SOUND
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AutoLock control.
9
MENU/
SELECT
STATUS/
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
EXIT
2
3
4
5
6
BLOCKING
BLOCK UNRATED
NO RATING
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
MUTE
Press the CURSOR RING
RIGHT again to highlight ACCESS
CODE.
CH
2,6
1
4
BLOCK OPTIONS
BLOCK OPTIONS
1
4
7
2
5
8
0
3
6
Enter your four-digit ACCESS
CODE.
5
AutoLock
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
AutoLock
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
9
Press the CURSOR RING DOWN
repeatedly until BLOCK OPTIONS
is highlighted.
TV/VCR
A/CH
SURF
OFF
AV3
ALL
1
ON
AV3
ALL
1
6
POSITION
PIP
5
Press the CURSOR RING
2
2
RIGHT to enter the BLOCK
OPTIONS submenu. BLOCKING
will be highlighted.
7
Press the CURSOR RING
RIGHT or LEFT to turn
BLOCKING ON or OFF.
8
9
Press the STATUS/EXIT button
to exit the menu.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING AUTOLOCK™ TO BLOCK UNRATED BROADCASTS
n addition to blocking rated programs or
Ichannels, you may also choose to block
all programming that is unrated. Unrated
programming consists of shows that the
MPAA (Motion Picture Association of
America) or the TV broadcasters have
chosen not to rate.
FEATURES
TIMER
FEATURES
TIMER
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU/SELECT but-
ton on the remote control to show
the on-screen menu.
FEATURES
POWER
FEATURES
1
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
Press the CURSOR RING
DOWN twice to highlight
FEATURES.
3,4,
TV
VCR
PIP CH
ACC
ACTIVE
2
SWAP
CONTROL FREEZE
DN
UP
7,9
PIRE
SOUND
Press the CURSOR RING
10
RIGHT. Then press the
CURSOR RING DOWN once
to highlight the AutoLock control.
MENU/
SELECT
3
STATUS/
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
EXIT
2
3
4
5
6
BLOCKING
BLOCK UNRATED
NO RATING
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
MUTE
Press the CURSOR RING
RIGHT again to highlight
ACCESS CODE.
CH
2,6,
1
BLOCK OPTIONS
BLOCK OPTIONS
4
2
5
8
0
3
6
8
Enter your four-digit ACCESS
CODE.
4
AutoLock
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
AutoLock
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
7
TV/VCR
A/CH
9
5
6
7
8
9
Press the CURSOR RING
DOWN repeatedly until BLOCK
OPTIONS is highlighted.
SURF
ON
ON
OFF
OFF
POSITION
PIP
5
Press the CURSOR RING
RIGHT to enter the BLOCK
OPTIONS submenu.
Press the CURSOR RING
DOWN once to select BLOCK
UNRATED.
Press the CURSOR RING
RIGHT or LEFT to turn
BLOCK UNRATED ON or OFF.
Press the STATUS/EXIT button
to exit the menu.
10
HELPFUL HINT
Channel 12
Blocked by AutoLock
Unrated
When the BLOCK UNRATED control is
turned ON, attempts to view unrated pro-
grams will bring to the screen a message
like the one shown to the right. To watch
the program, enter your access code or go
into the BLOCK OPTIONS submenu and
turn the BLOCK UNRATED control OFF.
Access Code
- - - -
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING AUTOLOCK™TO BLOCK BROADCASTS THAT HAVE NO RATING
ome programs contain no content advi-
Ssories from the Motion Picture
FEATURES
TIMER
FEATURES
TIMER
Association of America or the television
broadcasters (see page 46). To block pro-
grams with no rating, follow these steps.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU/SELECT
button on the remote control to
show the on-screen menu.
1
2
3
FEATURES
FEATURES
POWER
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
3,4,
TV
VCR
PIP CH
ACC
ACTIVE
Press the CURSOR RING
RIGHT. Then press the CUR-
SOR RING DOWN once
to highlight the AutoLock
control.
SWAP
CONTROL FREEZE
DN
UP
7,9
PIRE
SOUND
10
MENU/
STATUS/
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
SELECT
EXIT
2
3
4
5
6
BLOCKING
BLOCK UNRATED
NO RATING
Press the CURSOR RING
RIGHT again to highlight the
ACCESS CODE input area.
SETUP CODE
MOVIE RATING
TV RATING
SETUP CODE
MOVIE RATING
TV RATING
MUTE
CH
4
2,6,
1
BLOCK OPTIONS
BLOCK OPTIONS
2
5
8
0
3
6
Enter your four-digit ACCESS
CODE.
8
4
5
AutoLock
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
AutoLock
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
7
TV/VCR
A/CH
9
Press the CURSOR RING
DOWN repeatedly until BLOCK
OPTIONS is highlighted.
SURF
OFF
OFF
OFF
ON
ON
ON
6
POSITION
PIP
Press the CURSOR RING
RIGHT to enter the BLOCK
OPTIONS submenu.
5
7
8
9
10
Press the CURSOR RING
DOWN twice to highlight NO
RATING.
Press the CURSOR RING
RIGHT or LEFT to turn NO
RATING ON or OFF.
Press the STATUS/EXIT button
to exit the menu.
HELPFUL HINT
Channel 12
Blocked by AutoLock
No rating
If the NO RATING control is turned on,
all programs having no content advisory
information will activate a screen like the
one shown to the right. To watch the
channel, enter your access code or turn
Access Code
- - - -
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
REVIEWING YOUR CURRENT AUTOLOCK™ SETTINGS
utoLock™ provides a screen that shows
A
the settings you have selected. Here’s
how to access the screen.
MOVIE RATING -
TV RATING -
Y7
-
-
R
-
PG
14
MA
NC17
X
Press the STATUS/EXIT button on
the remote control twice. Your
AutoLock™ settings will appear on
the screen.
BLOCK UNRATED ON
NO RATING OFF
1
NOTE: If you have blocked specific
subratings, such as V for Violence in the
TV-PG category, these blocked subrat-
ings will not appear in the review.
Nonetheless, the subratings are still
blocked according to your selections.
POWER
TV
SWAP
VCR
PIP CH
ACC
After a few seconds, the settings will
leave the screen automatically, or
ACTIVE
CONTROL FREEZE
DN
UP
2
you can press the STATUS/EXIT
button to exit the menu.
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
MUTE
VOL
CH
HELPFUL HINT
The AutoLock™ review screen will appear
only if you have turned ON the BLOCK-
ING control (see page 51).
1,2
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
MOVIE RATING—shows all the movie ratings
that you have chosen to block within the MOVIE
RATING control. NOTE: If a lower rating is
blocked, higher ratings will also be blocked auto-
matically. For example, if you block R-rated pro-
grams, those that are rated X will also be blocked.
TV RATING—shows all the TV ratings that you
have chosen to block within the TV RATING con-
trol. NOTE: If a lower rating is blocked, higher
ratings will also be blocked automatically. For
example, if you block TV-PG-rated programs,
those rated TV-14 and TV-MA will also be
blocked. The TV rating controls also have subrat-
ings for Violence (V), Fantasy Violence (FV),
Sexual Situations (S), Coarse Language (L), and
Suggestive Language (D). If you turn off a main
rating but turn on a subrating of that main rating
control, programs having the subrating will be
blocked; however, the main rating will not appear
within the AutoLock review submenu because you
did not turn it ON.
MOVIE RATING -
TV RATING -
Y7
-
-
R
-
PG
14
MA
NC17
X
BLOCK UNRATED—shows whether you have
turned this control ON or OFF.
BLOCK UNRATED ON
NO RATING OFF
BLOCK NO RATING—shows whether you
have turned this control ON or OFF.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING THE CLOSED CAPTIONING CONTROL
losed Captioning (CC) allows you to read
Cthe voice content of television programs
on the TV screen. Designed to help the hear-
ing impaired, this feature uses on-screen text
boxes to show dialogue and conversations
while the TV program is in progress.
FEATURES
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
1
FEATURES
POWER
Press the CURSOR RING DOWN
twice to highlight FEATURES.
2
TIMER
AutoLock
PIP
CAPTION MODE
CC DISPLAY
Press the CURSOR RING RIGHT
to enter the FEATURES submenu.
3
CLOSED CAP
FORMAT
TV
ACC
3,5,
6
ACTIVE
Press the CURSOR RING DOWN
repeatedly until the CLOSED CAP
control is highlighted.
SWAP
PIP C
ONTROL FREEZE
DN
7
4
8
PICTU
OD
9
Press the CURSOR RING RIGHT.
The submenu will shift to the left and
CAPTION MODE will be highlighted.
Then press the CURSOR RING
RIGHT again to highlight the
CAPTION MODEs area.
MENU/
STATUS/
SELECT
EXIT
FEATURES
CLOSED CAP
CAPTION MODE
CC DISPLAY
5
CC1
CC2
MUTE
CH
CC3
CC4
CC MUTE
1
2,4
Press the CURSOR RING UP or
1
4
7
2
5
8
0
MUTE
Button
DOWN to select a CAPTION MODE.
6
6
NOTES:
Selecting the CC MUTE option
allows you to display Closed
CC MUTE
TXT1
TXT3
TXT3
TXT4
9
• CC1 mode is the usual setting. CC2,
CC3, and CC4 may not be supported
by broadcast stations.
TV/VCR
Captioning by pressing the MUTE
button on the remote control.
Note, however, that the program
you are watching must be providing
Closed Captioning.You must also
be sure CC DISPLAY is turned ON.
A/CH
SURF
POSITION
PIP
• The CC MUTE option turns the
Closed Captioning mode on whenever
the MUTE button on the remote
control is pushed. Select CC MUTE
in the on-screen submenu to turn this
feature on.
FEATURES
CLOSED CAP
CAPTION MODE
CC DISPLAY
ON
Press the CURSOR RING LEFT to
return to the CLOSED CAP submenu.
Then press the CURSOR RING
DOWN to highlight CC DISPLAY.
7
8
HELPFUL HINTS
• Refer to your area’s
TV program listings
for the stations and
times of shows
being broadcast
with Closed
Captioning.
OR
Press the CURSOR RING RIGHT
to turn the on-screen display of Closed
Captioning on or off. Closed
Captioning will be shown only if the
TV station broadcasting on the channel
has the feature available.
CC DISPLAY
OFF
TEXT Mode
Example Display
TheTV program is blocked
by theText screen.
CAPTION Mode
Example Display
• Broadcasters deter-
mine the content of
captions. Any
Press the STATUS/EXIT button to
exit the menu.
9
CLOSE CAPTION PROGRAMS ON WXYZ
occurrences of mis-
spellings, incorrect
grammar, or strange
characters are not
the result of TV
ALL ITEMS ARE EASTERN STANDARD TIME (EST)
CHECK LOCAL LISTINGS
FOR TIMES IN YOUR AREA
6:00 TOP OF THE MORNING
10:00 THE BEST LITTLE CALL-IN SHOW EVER
12:00 NOONDAY NEWS
1:30 AS YOUR LIFE TURNS MY WORLD AROUND
6:00 WORLD NEWS FOR TODAY
JOHN: Why did they move the
meeting up to this week?
9:00 PLAYHOUSE MOVIE OF THE WEEK
malfunction.
MARSHA: I don't know, but they
are pushing to close the deal.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING THE PICTURE-FORMAT CONTROL
Pictures appear more lifelike,
dramatic, and theatrical on your
TV's wide screen.
our TV’s wide screen (16:9 aspect ratio)
Ydelivers a home-cinema experience not pos-
sible with a conventional (4:3 aspect ratio) set.
High-definition (HD) programs originating in
16:9 format and other widescreen-format video
sources appear more lifelike, dramatic, and the-
atrical. Border bars are diminished or eliminat-
ed. Most anamorphic-DVD programs will fill
the wide screen without border bars.
HELPFUL HINTS
• The term aspect ratio refers to the rela-
tionship between the width and height of
a TV screen. Historically, TV screen
width has been 33 percent greater than its
height, amounting to a 4:3 aspect ratio.
The width of your widescreen TV, how-
ever, is nearly 80 percent greater than its
height, which means its aspect ratio is
16:9. This screen corresponds well with
the tendency of the eyes to feel more
comfortable with fields of view and
action planes that are horizontally orient-
ed. The wide screen is also proportionally
truer to the formats in which movies are
filmed and presented in theaters.
Use your HD set-top box or progressive-scan-
capable DVD player to control the picture for-
mats of video sources connected to the TV’s HD
inputs.
For flexibility with video sources connected to
your TV’s standard inputs—ANTENNA, AV1,
CVI, AV2, or AV3 (side panel)—access your TV’s
picture-format modes. View a video source in
standard (4:3) format or enlarge it to fill the
screen in various ways using EXPAND 4:3,
PANORAMA, WIDE SCREEN, or AUTO.
POWER
• Although the term widescreen can have
various meanings, it is most commonly
used to refer to a picture format or screen
that has a greater aspect ratio than the
conventional 4:3.
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
CURSOR
RING
DN
UP
PICTURE
SOUND
Selecting a Picture Format
Using the Remote Control
MENU/
SELECT
STATUS/
EXIT
Use your TV’s picture-format modes with video
sources you connect to the ANTENNA, AV1,
CVI, AV2, or AV3 (side panel) inputs on the TV.
While watching a video source—with no on-
screen menu or display present—press the
CURSOR RING RIGHT or LEFT as many
times as necessary to select the picture format
you desire. Or press the FORMAT button to
perform the same function.
The picture-format modes are available for use only with video
sources connected to the ANTENNA,AV1, CVI,AV2, and AV3
(Side Panel) inputs on theTV. Control the picture formats of
video sources connected to the HD inputs through the set-top
box (for HD programming) or progressive-scan-capable DVD
player (for DVD programs).
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
4:3
Shows the conventional picture
9
in its original format. Border bars
are displayed on the sides. See the
Warning on this page (below, left).
EXPAND 4:3
Zooms the picture
vertically and horizontally.
TV/VCR
A/CH
SURF
REC
SLEEP
•
FORMAT
SAP
AV
DOLBY
V
PROG.LIST
Picture-format Modes
4:3 shows the conventional (4:3 aspect ratio)
picture in its original format. Border bars are
displayed on the sides. (See the warning above.)
EXPAND 4:3
4:3
FORMAT
Button
PIP
POSITION
EVENING WORLD NEWS
TONIGHT'S HEADLINES
EVENING WORLD NEWS
TONIGHT'S HEADLINES
EXPAND 4:3 expands, or zooms, the picture
both vertically and horizontally, eliminating or
reducing the size of border bars. Picture infor-
mation is lost around the edges.
PANORAMA
WIDE SCREEN
Expands the picture
horizontally. No vertical
expansion occurs.
Stretches the outer parts of the
picture horizontally and causes
some vertical expansion.
PANORAMA stretches the outer portions of
the picture horizontally and causes some verti-
cal expansion.
WIDE SCREEN
PANORAMA
WIDE SCREEN expands the picture horizon-
tally. No vertical expansion occurs.
EVENING WORLD NEWS
EVENING WORLD NEWS
TONIGHT'S HEADLINES
TONIGHT'S HEADLINES
WARNING
AUTO senses the presence of borders bars and
zooms the picture to reduce or eliminate the
bars. The amount of zoom varies based on the
original picture, but this option can provide
more expansion than EXPAND 4:3.
AUTO
To prevent uneven
picture-tube aging,
do not leave border
bars or other sta-
tionary images on
screen for extended
periods of time. See
page 62.
Senses the presence of picture borders and zooms the
picture to reduce or eliminate the borders.
AUTO works best with video programs that
were originally “letterboxed.” Formatted to pre-
serve the original theatrical aspect ratio, these
programs are presented with border bars at top
and bottom.
AUTO
EVENING WORLD NEWS
EVENING WORLD NEWS
TONIGHT'S HEADLINES
TONIGHT'S HEADLINES
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING THE PICTURE-FORMAT CONTROL
Selecting a picture Format
Using theTV Buttons
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Should your remote control become lost or other-
wise unavailable for use, follow the steps below
to use the buttons on the front of the TV to access
the on-screen menu and select a picture-format
control.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the Volume + and – buttons
simultaneously. The on-screen menu
FEATURES
1
appears.
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the Channel Down button
repeatedly until FEATURES is high-
lighted. Then press the Volume + but-
ton to enter the FEATURES submenu.
OR
2
4:3
FORMAT
FORMAT
FORMAT
FORMAT
EXPAND 4:3
OR
OR
OR
Press the Channel Down button
repeatedly until FORMAT is highlight-
ed. Then press the Volume + or – button
until you select the picture format you
want.
PANORAMA
3
WIDE SCREEN
AUTO
Press the Volume + and – buttons
simultaneously and repeatedly until
you back out of the menu screens.
4
HELPFUL HINT
The TV’s Picture-format options are avail-
able only with video sources connected to
the ANTENNA, AV1, CVI, AV2, AV3 (side
panel) inputs on the TV. The picture formats
of video sources connected to the HD inputs
are controlled through the HD set-top box
or progressive-scan-capable DVD player
providing the video source.
WARNING
To prevent uneven picture-tube aging, do not
leave nonmoving images or black borders on
the screen for an extended period. See page 62.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Submenus: Features
USING ACTIVE CONTROL™
ctive Control™ Measures and corrects
A
all incoming signals to provide the best
picture-quality settings.
ACTIVE CONTROL ON
SHARPNESS
NOISE REDUCTION
8
20
When you choose to turn Active Control™
on, picture sharpness and noise reduction
are controlled automatically. Active
Control™ adapts picture settings continu-
ously and automatically.
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
CONTROL FREEZE
DN
UP
PICTURE
SOUND
NOTE: Active Control™ is not available for
signals connected to HD INPUT-AV 4
MENU/
SELECT
STATUS/
EXIT
ACTIVE
CONTROL
Button
ACTIVE CONTROL OFF
MUTE
Turning Active Control™ on or
off Using the Remote Control
While watching TV, press the ACTIVE
CONTROL button on the remote control to
turn the feature on or off. When you turn Active
Control™ on, the on-screen display shows the
up-to-the-moment picture Sharpness and Noise
Reduction settings.
Turning Active Control™ on or
off Using theTV Buttons
Should your remote control become lost or oth-
erwise unavailable for use, follow the steps
below to use the buttons on the front of the TV
to access the on-screen menu and turn Active
Control™ on or off.
FEATURES
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
Press the Volume + and – buttons
simultaneously. The on-screen menu
appears.
1
2
FEATURES
AutoLock
PIP
CLOSED CAP
FORMAT
Press the Channel Down button
repeatedly until FEATURES is high-
lighted. Then press the Volume + but-
ton to enter the FEATURES submenu.
ACTIVE CTRL
ON
Press the Channel Down button
repeatedly until ACTIVE CTRL is
highlighted. Then press the Volume +
or – button to turn Active Control™
on or off.
OR
3
ACTIVE CTRL
OFF
Press the Volume + and – buttons
simultaneously and repeatedly until
you back out of the menu screens.
4
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
COMPATIBILITY INFORMATION FOR THE TV’S HIGH-DEFINITION INPUTS
A
HD INPUT-AV 4
our set’s HD inputs (HD INPUT-AV 4 and
YHD INPUT-AV 5) are designed to accept
high-definition signal standards 480p and 1080i
as specified by the Electronic Industries
Association. Output standards may vary by man-
ufacturer. Refer to the directions-for-use manual
for the digital equipment before connecting.
When the Inputs Are Used with ComponentVideo Signals
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
NOTES:
The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y.
The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y.
NOTE: HD INPUT-AV 5 is for DVI TMDS input
only.
When the Inputs Are Used with RGBVideo Signals
G/Y: 1.0Vp-p, 75 ohms (compatible with sync on green)
R/Pr: 700 mVp-p, 75 ohms
B/Pb: 700 mVp-p, 75 ohms
H: 3Vp-p ± 1.0V, 1 kohm (when using separate H andV sync)
V: 3Vp-p ± 1.0V, 1 kohm (when using separate H andV sync).
HELPFUL HINTS
• No industry standards have been estab-
lished for HD television RGB signal sys-
tems, timing, synchronization, and signal
strengths. The HD INPUT-AV 4 RGB
inputs on your Philips TV will not be
compatible with all digital equipment that
offers RGB outputs. If the digital equip-
ment you want to connect offers both
component video and RGB, component
video is the suggested type of connection
to use.
HD INPUT-AV 5
This input accepts a digital video interface (DVI) connector, which uses digital
data in the format data standard called transition minimized differential signal-
ing (TMDS).
• Your TV’s on-screen INSTALL submenu
provides the option of switching the AV4
signal source between YPbPr and RGB
color-space settings. The option is avail-
able only when you have selected the
AV4 signal source (using the AV button
on the remote or the Source Select button
on the TV). The default setting for AV4 is
YPbPr. See page 61.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
MODEL SPECIFICATIONS
B
ProductType
S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel)
Y-INPUT: 1Vp-p (includes sync), 75 ohms
C-INPUT: 300 mVp-p, 75 ohms
Rear-projection HDTV Monitor
Television System
INPUT-AV 2
VIDEO (composite): 1Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
NTSC standard
Channel Coverage
HD INPUT-AV 4
ComponentVideoYPrPb/RGB (See page 59.)
AUDIO: 500 mVrms, 30 kohm
VHF: 2–13
UHF: 14–69
Cable TV: Midband
Superband
HD INPUT-AV 5
Digital video interface (DVI) (See page 59.)
AUDIO: 500 mVrms, 30 kohm
Hyperband
Ultraband
CENTER CHANNEL INPUT
50W maximum power rating
Ambient OperatingTemperature
+41 to 113ºF (+5 to +45ºC)
VIDEO/AUDIO OUTPUT
VIDEO: 1Vpp, 75 ohms
AUDIO: Fixed: 500 mVrms into ˙10 kohm
Variable: 0–2Vrms into ˙10 kohm
MainsVoltage
AC 110 10%
Power Consumption
SUBWOOFER OUTPUT
Line-level output
180W (average)
Side Panel (AV3)
Standby Power
VIDEO (composite): 1Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5Vrms, 16 ohm
<1 W
Audio
Frequency response: 20Hz–15kHz, +1/–3dB (ampl.)
Stereo output with 2 x 15W RMS
Two sets of 2” and 5” speakers.
PictureVisible Area
55PW9383: 55 in.
60PP9383: 60 in.
SpeakerType
Dimensions (W” x H” x D”)
55PW9383: 52.6 x 57 x 25.6
60PW9383: 56.7 x 59.4 x 27
51-mm (2 in.) tweeters and 127-mm (5 in.) woofers
Video/AudioTerminals
INPUT-AV 1
VIDEO (composite): 1Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
Weight (does not include carton)
55PW9383: 190 lb
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
60PW9383: 210 lb
Supplied Accessories
Pr INPUT: 700mVp-p, 75 ohms
Remote control with two size “AA” batteries.
Design and specifications are subject to change without notice.
(The Pb INPUT jack can also receive signals from outputs
labeled Cb or B-Y.The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
SETTING COLOR SPACE FOR HD INPUT-AV 4
C
olor space refers to how colors are
Cdefined and appear on your TV. Your
TV’s default color-space setting for HD
INPUT-AV 4 is YPbPr. RGB is also an
option. If the picture’s color looks grossly
incorrect, try changing the color-space set-
ting on either the digital equipment or the
TV. For more information on setting the
color space on the digital equipment, see its
directions-for-use manual. To set the TV’s
color space, follow the steps below.
AV4
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
POWER
INSTALL
Press the AV button on the remote
control as many times as necessary to
select AV4.
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
1
TV
SWAP
VCR
PIP CH
ACC
ACTIVE
Press the MENU/SELECT button.
The on-screen menu appears.
AV4
YPbPr
RGB
CONTROL FREEZE
DN
UP
2
PICTURE
SOUND
Press the CURSOR RING DOWN
until INSTALL is highlighted. Then
press the CURSOR RING LEFT or
RIGHT to enter the INSTALL sub-
menu.
5
OR
MENU/
STATUS/
3
SELECT
EXIT
AV4
MUTE
CH
Press the CURSOR RING DOWN
repeatedly until AV4 is highlighted.
The current color space is shown
(either YPbPr or RGB).
3,4
2
4
1
4
7
2
5
8
0
3
6
If you want to change the setting, press
the CURSOR RING LEFT or RIGHT.
9
TV/VCR
A/CH
SURF
Press the STATUS/EXIT button to
exit the menu.
1
REC •
SLEEP
5
FORMAT
SAP
AV
DOLBY V PROG.LIST
POSITION
PIP
61
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information: Care and Cleaning
CARE AND CLEANING
WARNING Concerning Stationary Images on
theTV Screen:
Do not leave picture border bars or stationary
images on screen for extended periods of time.
This can cause uneven picture-tube aging.
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color changes, and
increased chance of set failure, do not place the TV where
temperatures can become excessively hot; for example, in
direct sunlight or near a heating appliance.
• Be sure to allow a free flow of air to and from the perforated
back cover of the set.
Normal use of the TV should involve the showing of pictures
that contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for
extended periods of time, or to display the same images on
screen too frequently, because subtle ghost images can be left
on the picture tubes. Avoid showing pictures with border bars or
the same stationary images more than 15 percent of your total
viewing in any one week. Sources of stationary images may be
broadcast channels, cable channels, satellite channels, digital
television boxes, DVD discs, laser discs, video games, CD-i
discs, videotapes, and others. Here are some examples of sta-
tionary images (this is not an all-inclusive list; you may
encounter others in your viewing):
CLEANING
• To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, nonscratching duster to
keep the TV clean.
• When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything abra-
sive. Do not use household cleaners. Wipe the front screen
with a clean cloth dampened with water. Use even, easy, ver-
tical strokes when cleaning.
• Border bars—solid bars shown when viewing a standard
(4:3) picture and some widescreen movies on your
widescreen (16:9) TV
Specially designed screen-cleaning kits are also available.
These kits contain anti-static cleaners and cloths designed to
get into the ridges of the TV screen. Purchase the kits at
stores that sell electronics. Or call our Customer Care Center
at 1-800-531-0039.
• DVD menus—listings of DVD disc content
• Video-game images and scoreboards
• Television station logos—present a problem if they are bright
and stationary; moving or low-contrast graphics are less like-
ly to cause uneven aging of the picture tube
• Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap
or detergent. Use a clean, dry cloth to dry the wiped surfaces.
• Stock-market tickers—presented at the bottom of the TV
screen
• Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
• Shopping channel logos and pricing displays—bright and
shown constantly or repeatedly in the same location on the
TV screen.
• Never use thinners, insecticide sprays, or other chemicals on
or near the cabinet, as they might cause permanent marring of
the cabinet finish.
All picture tubes age with use, with their light output diminish-
ing over time. But by maintaining normal use—mixing televi-
sion picture types—you will create conditions in the tubes age
at an even rate. The result will be a TV picture that is evenly
bright over the entire screen.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information:Troubleshooting
TROUBLESHOOTING
CheckThis List of Symptoms and Possible Solutions Before Requesting Service
You may be able to solve the problem yourself. Charges for TV installation and adjustment of customer controls are not cov-
ered under your warranty.
If you need to call a customer service representative, please know the model number and serial number of your product before you
call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having,
and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please
stay near the product. Our representative will be happy to assist you. To reach our Customer Care Center, call 1-800-531-0039.
Difficulties and Possible Solutions (*Q refers to the Quick Use and Setup Guide that came with yourTV.)
TheTV remote control does not work
• Check that the batteries are installed correctly. See page Q-2*.
• If the batteries are dead, replace them with two “AA” size heavy duty (zinc chloride) or alkaline batteries. See page *Q-2.
• Be no farther than 30 feet from the TV when using the remote control and point the remote toward the remote-sensor window on
the TV. See page *Q-2 for the location of the remote-sensor window.
• Clean the remote control and the remote-sensor window on the TV. See page *Q-2 for the location of the remote-sensor window.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote power or
TV power/standby button again. To locate the TV power/standby button, see page *Q-2.
• If you have your TV plugged into an AC power strip, ensure that the fuse on the power strip is not blown.
• Check to see if the TV is on a wall switch.
TheTV has no power
• Check the TV’s power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote-control
power or TV power/standby button again. The location of the TV power/standby button is illustrated on page *Q-2.
• Check that the outlet is not on a wall switch.
• If you are using an AC power strip, be sure the fuse on the power strip is not blown.
You cannot get a picture
• Be sure that you have made signal connections correctly and securely. See pages *Q-1, *Q-2, 6–9, and 12–16.
• Check the Tuner Mode control for the correct tuner setting. See page *Q-5.
• Try running the Auto Program feature. See page *Q-5.
• Ensure that you have selected the correct picture signal source using the AV (remote) or Source Select (TV) buttons. See page 24.
• If you are attempting to view a picture from a progressive-scan-capable DVD player to the HD inputs, ensure that you have
switched the DVD player to progressive-scan mode. See page 14, as well as the DVD player’s directions-for-use manual.
• If you are using an HD receiver, ensure that its output is set correctly (HD or SD) based on the connection to the TV you have
made. See 15. Also, refer to the directions-for-use manual that came with the HD receiver.
Picture is fuzzy or out of focus
Check the set’s convergence and adjust if necessary. See page *Q-7 and pages 33–34.
You cannot see a picture when you play aVCR tape
Press the AV button on the remote control or the Source Select button on the TV until you have selected the source to which you
connected the VCR. See page 24 (AV button) or page *Q-2 (Source Select button).
You cannot tune to a particular channel
• Use the number buttons on the remote instead of the CH +/– buttons. See page *Q-3 (remote-control buttons).
• If necessary, select the Tuner Mode and run Auto Program to store channels to the set’s memory. See page *Q-5.
You see scrolling images
Check to ensure that you have made connections correctly. See pages *Q-1, *Q-2, 6–9 and 12–16.
The list of difficulties and possible solutions continues on the next page.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information:Troubleshooting
TROUBLESHOOTING
Difficulties and Possible Solutions (*Q refers to the Quick Use and Setup Guide that came with yourTV.)
The picture has no color or colors are not correct
• Check to ensure that you have made connections correctly. See pages *Q-1, *Q-2, 6–9, and 12–16.
• If you have connected digital equipment to the HD inputs, check/change the color-space setting on the equipment or TV. See page 61.
• If the picture has red or blue fringes, you may need to adjust the convergence. See page *Q-7 or pages 33–34.
You are not able to get sound
• Check the Volume buttons on the remote control or on the TV. See pages *Q-2 (TV buttons) and *Q-3 (remote-control buttons).
• Check the Mute button on the remote. See page *Q-3 for the location of the Mute button.
• Check the Audio Out and Speaker controls. See page 10.
• If you have connected auxiliary sound equipment, check to ensure that you have made the audio connections correctly. See
pages 6–17. (If you have connected an external audio hi-fi system or amplifier, see pages 10 and 11 to ensure that you have made
the connections and set the AUDIO OUT control correctly.)
TV displays wrong channel or no channels above 13
• Try selecting the channel again.
• Add the desired channel numbers into the TV using the Channel Edit control. See page *Q-5.
• Check to ensure that the Tuner Mode is properly set and run Auto Program. See page *Q-5.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information: Glossary ofTelevisionTerms
GLOSSARY OF TELEVISION TERMS
Active Control™ • Proactive video-control system for NTSC
(see definition below) sources. Active Control™ continuously
measures and corrects the incoming signals to provide the best
picture possible.
to adjust or set.
NTSC • National Television Standards Committee format
devised in the 1940s for TV broadcast analog video signals
(525 lines: 30 Hz).
Alternate Channel • The feature that allows you to toggle
between the last two channels viewed by pressing the A/CH button
on the remote control.
On-screen Displays (OSD) • The wording or messages generated
by the television (or VCR) to help you with specific feature con-
trols (color adjustment or programming, for example).
Audio/Video Inputs • Jacks (standard RCA), located on the rear of
the TV, used for the input of audio and video signals. These jacks
are designed for use with VCRs (or other accessories) to receive
higher picture resolution and offer sound-connection options.
Picture-in-Picture • The showing of two pictures on the TV screen
at the same time (one main screen picture and one small picture, or
PIP).
Progressive Scan • A picture-scanning technique that doubles the
number of picture lines, eliminating the flicker and providing a
jitter-free picture.
Auto Program • The feature that, when activated, scans for all
available channels from regular antenna or cable signals and stores
only active broadcast stations in the TV’s memory.
PTV • Projection Television. (Rear- and/or front-projection design
systems are available.)
Channel Edit • The feature that allows you to add or delete chan-
nels from the list of channels stored in the TV’s memory. Channel
Edit makes it easy to limit or expand the number of channels that
are available to you when you press the CH +/– buttons on your
remote control.
Remote-control Sensor Window • The window or opening found
on the television control panel through which infrared remote-con-
trol command signals are received.
RGB • Red, green, and blue signal. These are the primary colors of
light that are used to produce a picture in television. By mixing
levels or R, G, and B, all colors (chrominance and luminance) are
reproduced.
Closed Captioning • The broadcast standard feature that allows
you to read the voice content of television programs on the TV
screen. Designed to help the hearing impaired, Closed Captioning
uses on-screen text boxes to show dialogue and conversations
while a TV program is in progress.
RF • Radio Frequency or modulated signal design used as the car-
rier for television broadcasts.
Coaxial Cable • A single solid wire normally matched with a
metal plug (F-type) end connector that screws (or pushes) directly
onto a 75-ohm input found on the television or VCR.
Second Audio Program (SAP) • An additional audio channel pro-
vided for in the Multichannel Television Sound (MTS) broadcast
standard. A monaural soundtrack included within the recorded or
video signal (usually containing a second language translation for
the displayed programming).
Comb Filter • TV filter that removes distortion, resulting in a
sharper and purer color display. The comb filter addresses the
annoying cross-color distortion that may occur in TV broadcasts
when, for example, the presenter wears a striped or checked jacket.
Status/Exit Button • Remote-control button that, when pressed,
shows the current channel number, name (if set), time (if set),
Sleep Timer setting, and sound setting (stereo, mono, SAP, or
mute). Pressing the button twice shows the current AutoLock™
settings. Pressing the button once when an on-screen display is
showing removes the on-screen display. You can use Status/Exit
rather than having to wait for the displays to “time out,” or auto-
matically disappear from the screen.
Component Video Inputs • Inputs that allow the separate recep-
tion of blue, red, and luminance signals. These inputs provide the
highest possible color and picture resolution in the playback of dig-
ital signal-source material, such as the kind available from DVD
players. Component video inputs allow for improved bandwidth
information not possible through composite video or S-Video con-
nections.
S-Video Input • Signal input that allows direct connection of high-
resolution video sources, such as a satellite receiver, DVD player, S
(Super)-VHS videocassette recorder, or video games. Provides
improved picture resolution, sharpness, and clarity.
Composite Video Input • An input in which all the components
required for displaying the on-screen image are combined in one
signal.
Convergence • The technique used in color TV for bringing the
red, green, and blue color beams together so that they hit the same
part of the picture tube screen at the same time. This avoids color
fringes around images in the picture.
480p • Digital picture format with 704 x 480 pixels, sent at 60
complete frames per second. This is the output format of progres-
sive-scan DVD players.
1080i • Digital high-definition picture format with 1920 x 1080
pixels, sent at 60 interlaced frames per second (30 complete frames
per second).
High-definition Television (HDTV) • High-resolution digital tele-
vision. HDTV is high-resolution digital television. It has lifelike
pictures, and with it films retain their original width, enhancing the
home theater experience.
Tint • TV function that allows you to change the general color bal-
ance between cool and warm. Adjust tint according to your person-
al preference.
Incredible Surround™ • False acoustic management of the audio
signal that produces a dramatic expansion of the wall of sound that
surrounds the listener and heightens overall viewing pleasure.
Twin–lead Wire • The more commonly used name for the two-
strand, 300-ohm antenna wire used with many indoor and outdoor
antenna systems. In many cases, this type of antenna wire requires
an additional adapter (or balun) in order to connect to the 75-ohm
input terminals designed into the more recent TVs and VCRs.
Interlaced • A picture-scanning technique that improves the
appearance of on-screen motion. It also helps smooth jagged lines
that are sometimes seen on curved and angled surfaces in the pic-
ture.
Menu • An on-screen list of feature controls available for the user
65
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information: Index
INDEX
Hi-fi system, 10
Definition, 65
A
Satellite receiver (standard), 6, 12, 13
S-Video device, 13
VCR, 8
Feature description, 5
Remote-control buttons, *Q-3, *Q-8
Tint control, *Q-8
Active Control™, 58, 65
Alternate Channel (A/CH), 28, 65
APAC™, 5
VCR and cable box, 9
Convergence Controls
Red/blue, 33
Tuning channels, *Q-5
Program List, *Q-3, 28
Audio Out Control, 10
Audio/Video Inputs (Definition), 65
AutoChron™ Control, *Q-6
Auto IntelliSense™, *Q-7
AutoLock™ Control
Access code, 47
R
Restore factory, 34
Registration/Welcome, 2
Remote Control
Multipoint red/blue, 34
Save multipoint settings, 34
Undo multipoint, 34
Battery installation/caution, *Q-2
Button descriptions, *Q-3
Programming, 18–23
Blocking channels, 48
Movie ratings, 49
No rating broadcasts, 53
On/off control, 51
Settings review, 54
D
Digital video interface (DVI), 7, 59
Dolby** Virtual Control, 37
Dynamic Contrast Control, 32
Sensor Window, *Q-2, 65
Usage, *Q-2, *Q-3, *Q-4
RF (Definition), 65
RGB Color Space Setting (See Color
Space Control)
Setup Code, 47
TV ratings, 50
E
Eye Fidelity Control, 31
Understanding AutoLock™, 46
Unrated broadcasts, 52
AutoPicture™, 26
Auto Program, *Q-5, 65
AutoSound™, 25
AutoSurf™, 27
S
F
Factory Service Locations, 67–68
Safety/Precautions, *Q-2, 2, 3
SAP, 39, 65
Sharpness Control, 30
Sleep Timer Control, 29
Source Select Button, *Q-2, 24
Specifications, 60
Stationary Images/Warning, 62
Status/Exit Button, *Q-3, 65
Stereo/Mono Control, 38
Surf Button (See AutoSurf™)
Surround-sound Modes, 37
S-Video, *Q-1, 6, 13
G
Glossary, 65
AV Button, 24
AVL Control, 36
H
Headphone Control, 17
High-definition Television (Definition), 65
B
Balance Control, 35
Bass Boost Control, 40
Bass Control, 35
I
Incredible Surround™ Control, 37, 65
Inputs (See Panel Jacks)
Brightness Control, 30
Buttons (TV), *Q-2
Buttons (Remote), *Q-3
T
Timer Control,
L
Language Control
(See Menu Language Control)
C
Activate, 45
Channel, 44
Clock, 41
Start time, 43
Stop time, 43
Cables/connectors, *Q-1
Channel Edit Control, *Q-5, 65
Cleaning (TV/Screen), 62
Clock (See Timer Control)
Closed Captioning Control, 55, 65
Coaxial Cable (Definition), 65
Color Control, 30
M
Menu, *Q-4, 65
Menu Language Control, *Q-4
Movie Ratings, 46, 49
MPAA, 46, 65
Time display, 42
Tint Control, 30, 65
Treble Control, 35
Troubleshooting, 63–64
Tuner Mode, *Q-5
Twin-lead Wire (Definition), 65
Mute Button, *Q-3, 17, 55
Color-space Control, 61
Color Temp Control, 30
Component Video Inputs (Definition), 65
Composite Video Input (Definition), 65
Connections
N
Name Control, *Q-7
NTSC, 65
V
Volume Control, *Q-2, *Q-3
Amplifier, 11
Antenna/cable, *Q-1
Basic, *Q-1, *Q-2
Cable converter box, *Q-2
Camcorder, 16
Compatibility, 6, 7, 59
DVD player, 12, 14
HD receiver, 15
O
On-screen Displays (Definition), 65
W
Warranty, 72
P
Panel Jacks (Overviews), 6, 7
Picture Button (See AutoPicture™)
Picture Control, 30
Picture-format Control, 56–57
PIP (Picture-in-Picture)
Y
YPbPr Color Space Setting (See Color
Space Control)
Headphone, 17
*Q refers to the Quick Use and Setup Guide that came with your TV.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Factory Service Locations
FACTORY SERVICE LOCATIONS
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain
efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For
Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous), vous
pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le produit est
sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la garantie, con-
tactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse con
la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud.
debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame
al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-531-0039 (English or Spanish speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-531-0039 (Anglais ou Espagnol)
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-531-0039 (Inglés o Español))
Rev. FF - 10/1/2002
3135 015 07541
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Factory Service Locations
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES DE
RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS DANS
UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
CLEVELAND
CHICAGO
Philips Factory Service
550 Franklin Road., Suite F
Marietta, GA 30067
800-273-1501
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
DETROIT
KNOXVILLE
Philips Factory Service
1911 US Highway 301 North, Suite 100
Tampa, FL 33619
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
Philips Factory Service
One Philips Drive
Knoxville, TN 37914
800-821-1767
800-442-2027
SAN FRANCISCO
DALLAS
PHILADELPHIA
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
Philips Factory Service
415 N. Main Street, #107
Euless, TX 76040
800-952-3254
Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
HOUSTON
LOS ANGELES
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
800-952-3254
Philips Factory Service
20930 Bonita, Ste. V
Carson, CA 90746
800-300-9013
68
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
LIMITED WARRANTY
PROJECTIONTELEVISION
OneYear Free Labor
OneYear Free Service on Parts
TwoYears Free Service on Cathode Ray Tube Parts / 30 days Free Service on Projection TV Screen
This product can be repaired in-home.
WHO IS COVERED?
MAKE SUREYOU KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby. Also
keep the original box and packing material in case you need to return
your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For one year
thereafter (30 days for the projectionTV screen), all parts will be repaired
or replaced, and labor and transportation are free. From one to two years
from the day of purchase, you pay for the replacement or repair of all parts
except the cathode ray tube and for all labor and transportation charges.
After two years from the day of purchase, you pay for the replacement or
repair of all parts and for all labor and transportation charges.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
TO GET WARRANTY SERVICE...
Repair must be performed by an authorized service center or a factory
service center. If you do not live near a factory service center, contact your
dealer. If your dealer is an authorized service center, he will arrange
repair. If your dealer is not an authorized service center, he will direct
you to the authorized service center engaged by him to service the
products he sells.
All parts, including repaired and replaced parts, are covered only for
the original warranty period.When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a particular
purpose, are limited in duration to the duration of this express warranty.
But, because some states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you.This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
•
IF YOU HAVE QUESTIONS...
Please contact Philips at:
•
1-800-531-0039, if calling from the USA (English or Spanish Speaking)
1-800-661-6162, if calling from Canada (French Speaking)
1-800-531-0039, if calling from Canada (English or Spanish Speaking).
REMEMBER...
•
a product used for commercial or institutional purposes.
Please record below the model and serial numbers found on the prod-
uct.Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consumer Electronics, P.O. Box 520890, Miami, FL 33152, (402) 536-4171
EL4945E006 / 2-03
72
Download from Www.Somanuals.com. All Manuals Search And Download.
|