MP3-CD Soundm achine
AZ
4000
Read this manual first!
Return
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
your Warranty
Registration Card
within 10 days
Y
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3 4
5
6
7 8
9
0
! @ #
$
% ^ &
*
SS
BA
RA
LT
U
IR SENSOR
FM/AM
all
PROGRAM
Y
DISPLA
SLEEP
SEARCH
PRESET/ ALBUM
CD MODE
2
3
4
5
6
1
%
$
#
@
7
8
9
!
0
@
(
4
)
¡
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General inform ation
Maintenance
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 7
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6
Environmental. . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 13
MP3-CD/ CD Playback
Important specifications . . . . . . . . . . . . . . 14
Controls
Display indication for
MP3-CD/ CD functions. . . . . . . . . . . . . . . 15
Overview illustration . . . . . . . . . . . . . . . . . . 3
Top and front panels . . . . . . . . . . . . . . . . . . 8
Playing MP3-CD & CD . . . . . . . . . . . . . . . 15
MP3-CD/ CD text display. . . . . . . . . . . . . 16
Selecting a different title/ track . . . . . . . . . 16
Different play modes . . . . . . . . . . . . . . . . . 17
Programming track numbers . . . . . . . . . . 17
Power Supply
Power supply. . . . . . . . . . . . . . . . . . . . . . . . . 9
Using AC Power . . . . . . . . . . . . . . . . . . . . . 10
Switching POWER on/off . . . . . . . . . . . . . 10
Sleep
Adjusting the sound
About Sleep . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the sound . . . . . . . . . . . . . . . . . . 11
Troubleshooting
DigitalTuner
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 19
Tuning to stations . . . . . . . . . . . . . . . . . . . . 12
CAUTION
Use of controls or adjustments or performance of procedures other than herein may
result in hazardous radiation exposure or other unsafe operation.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Canada
English:
This digital apparatus does not exceed the Class B limits for noise emissions from digital
apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
________________________________________________
8
English
______________________________________________
Français
25
42
______________________________________________
Español
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily
separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packing
materials, dead batteries and old equipment.
Informations relatives à l’environnement
Nous n’avons pas utilisé de matériaux d’emballage non nécessaires.Vous pouvez
facilement séparer les matériaux d’emballage en trois éléments principaux: carton,
polystyrène extensible et polyéthylène.
L’appareil est constitué de matériaux qu’il est possible de recycler, s’il est démonté
par une société spécialisée.Veuillez avoir l’obligeance de respecter les
réglementations locales concernant la manière de se débarrasser des matériaux
d’emballage, piles épuisées et matériel usé.
Información ambiental
Se ha omitido todo el material de embalaje innecesario. Los materiales de embalaje
se pueden separar fácilmente entre tres tipos: cartón, poliestireno y polietileno.
Su aparato está formado por materiales que pueden reciclarse si pueden ser
desmantelados por una compañía especializada. Observe las normas locales
relacionadas con la eliminación de materiales de embalaje, pilas gastadas y equipo
desechado.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPO RTANT SAFETY INSTRUCTIO NS
– Read before operating equipm ent
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near
water.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the m anufacturer´s instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
9. Do not defeat the
safety purpose of the
15.Battery usage CAUTIO N –
To prevent battery leakage which may
result in bodily injury or damage to the unit:
polarized or grounding-
type plug. A polarized
AC
Polarized Plug
plug has two blades with one wider than
the other.A grounding type plug has two
blades and a third grounding prong.The
wide blade or the third prong are provided
for your safety. If the provided plug does
not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
G
G
G
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not used
for a long time.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
EL 6475-E003: 01/6
11.O nly use attachm ents/accessories
specified by the manufacturer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
PO RTABLE AUDIO
OneYear Free Exchange
This product must be carried in for an exchange.
W HO IS COVERED?
EXCHANGING A PRO DUCT IN U.S.A.,
PUERTO RICO O R U.S.VIRGIN ISLANDS...
Contact your dealer to arrange an exchange. Or, ship the
product, insured and freight prepaid, and with proof of
purchase enclosed, to the address listed below.
Small Product Service Center
You must have proof of purchase to exchange the product.
A sales receipt or other document showing that you
purchased the product is considered proof of purchase.
Attach it to this owner’s manual and keep both nearby.
W HAT IS COVERED?
Philips Service Company
Warranty coverage begins the day you buy your product.
For one year thereafter, a defective or inoperative product
will be replaced with a new, renewed or comparable
product at no charge to you.A replacement product is
covered only for the original warranty period.When the
warranty on the original product expires, the warranty on
the replacement product also expires.
907 Snapps Ferry Road, Plant 2, Building 6
Greeneville,TN 37743
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the
duration of this express warranty. But, because some states do
not allow limitations on how long an implied warranty may
last, this limitation may not apply to you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
EXCHANGING A PRO DUCT IN CANADA...
Please contact Philips at:
•
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
not within the control of Philips Consumer Electronics
Company.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or
fitness for a particular purpose. Philips is not liable under
any circumstances for any direct, indirect, special, incidental
or consequential damages, howsoever incurred, even if
notified of the possibility of such damages.)
•
•
reception problems caused by signal conditions or
cable or antenna systems outside the unit.
a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is not
limited to, prerecorded material, whether copyrighted
or not copyrighted.)
TO GET O UT-O F-WARRANTY EXCHANGE...
In U.S.A., Puerto Rico or U.S.Virgin Islands, contact Philips
Service Company at (800) 531-0039 to obtain the cost of out-
of-warranty exchange.Then carefully pack the product and
ship it to the Small Product Service Center (address listed
above). In Canada, call the phone number listed above under
“Exchanging a Product in Canada” to obtain the cost of out-
of-warranty exchange.
•
•
a product used for commercial or institutional
purposes.
REMEMBER...
Please record the model and serial numbers found on the
product below.Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.
W HERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
product is officially distributed by Philips Consumer
Electronics Company. In countries where Philips Consumer
Electronics Company does not distribute the product, the
local Philips service organization will attempt to provide a
replacement product (although there may be a delay if the
appropriate product is not readily available).
MODEL # __________________________________
SERIAL #
__________________________________
BEFO RE REQ UESTING EXCHANGE...
Please check your owner’s manual before requesting an
exchange.Adjustments of the controls discussed there may
save you a trip.
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, (903) 242-4800
EL6095T002 / MAC5433 / 1-97
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Top and front panels
14 PLAY•PAUSE 2;–
starts or pauses MP3-CD/ CD playback
1
2
BASS/TREBLE –
enhances bass/treble response
15 STO P 9– stops MP3-CD/ CD playback;
erases a MP3-CD/ CD program
SO UND CO NTRO L
CENTRE/VO LUME – adjusts volume
level and digital equalizer settings
16 SLEEP – selects SLEEP function and
adjusts the SLEEP time
3
4
5
6
ULTRABASS – enhances bass response
p – 3.5 mm headphone jack
17 DISPLAY
MP3-CD: shows various text and time
information during playback;
TUNER: displays tuner information
FM/AM – selects FM/ AM waveband
POW ER y – switches the set on/off
18 IR SENSO R – infrared for remote control
Note: The set can only be switched on using
Back & Bottom Panel
this button.
19 Battery door –
7
8
9
SO URCE – selects sound source for
CD orTUNER
open to insert 8 x R-20, UM-1 or D-cells
20 AC MAINS – inlet for power cord
MP3-CD/ CD door –
press door to open/ close
21 Voltage selector (som e versions
only) – adjust to match the local voltage
110/220V before plugging in the set
CD MO DE – plays MP3-CD/ CD tracks/
CD/ a program in random order;
– repeats a track/ MP3-CD/ CD/ program
Digital Rem ote Control
1
2
CD – selects MP3-CD/ CD sound source
10 PRO GRAM
MP3-CD/ CD: programs and reviews
programmed tracks;
TUNER: programs tuner stations
y – switches the set off
Note: When the set is switched off, the
remote control cannot operate any
11 PRESET / ALBUM -,
commands.The set needs to be switched on
first via the set’s POW ER y button.
+
MP3 only: selects previous/next album;
TUNER: selects a previous/next preset
station
3 3VO LUME 4– adjusts volume level
4
SHUFFLE – plays all MP3-CD/ CD tracks
in random order
12 Telescopic antenna –
to improve FM reception
5
BASS – selects ULTRABASS on/off
13 SEARCH ∞, §
MP3-CD/ CD: fast searches backwards,
forwards within a track;
6 2; – starts MP3-CD/ CD playback;
– pauses MP3-CD/ CD playback
skips to previous/ next track
TUNER: tunes radio (manually: down, up);
automatic search tuning (down, up)
7
SEARCH 5, 6–
search within MP3-CD/ CD track
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Power Supply
8
9
BAND – selects FM/ AM waveband
Rem ote control
PRESET , - (up, down)
+
MP3-CD: selects an album;
TUNER: selects a preset radio station
10 TUNING ∞, §(down, up)– tunes to
tuner stations
11 TUNER – selects tuner sound source
12 9– stops MP3-CD/ CD playback;
– erases a MP3-CD/ CD program
Insert 2 batteries, type AAA, R03 or UM4
13 ¡, ™ – skips to the beginning of a current
(preferably alkaline).
track previous/ subsequent track
2
Replace the compartment door, making
sure the batteries are firmly and correctly in
place.The set is now ready to operate.
14 MUTE – interrupts/ resumes sound
15 REPEAT – repeats a track/ program/
entire MP3-CD/ CD
Battery low indication
If battery power is running low,
appears in the display.You should change to
AC power or replace the batteries.
Power Supply
Whenever convenient, use the power
supply if you want to conserve battery life.
Make sure you remove the plug from the
set and wall outlet before inserting
batteries.
Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to
burst.Therefore:
Batteries (not included)
•
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
•
•
When inserting new batteries, do not try to
mix old batteries with the new ones.
8
x
R20/ UM1/ D CELL
Remove the batteries if the set is not to be
used for a long time.
Batteries contain chemical substances,
so they should be disposed of properly.
1
Open the battery compartment and insert
8 batteries, type R-20, UM-1 or D-cells,
(preferably alkaline) with the correct
polarity as indicated by the "+" and "–"
symbols inside the compartment.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
Switching POW ER on/off
Using AC Power
AC MAINS
ASS
TRAB
L
U
M
/A
FM
all
PR
M
GRA
PRO
DE
MO
CD
IMPO RTANT!
1
2
Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local
power supply. If it does not, consult your
dealer or service center.
1 This set can only be switched on by
pressing the POW ER y button on
the set.
2 Whether you are using mains or battery
supply, to avoid unnecessary energy
consumption always press POW ER y on
the set or y on the remote control to
switch off.
Connect the power cord to the MAINS
inlet and the wall outlet.The power supply
is now connected and ready for use.
3
To switch off completely, withdraw the
power cord from the wall outlet.
When the set is switched off, the set's
memory will retain:
•
Disconnect the power cord from the wall
outlet to protect your set during heavy
thunderstorms.
– the tuner presets;
– the volume level setting
(level 20 maximum), and sound settings;
– the last sound source played.
The type plate is located on the
bottom of the set.
•
The display backlight only operates when
using AC power supply.
•
If the set is operated on batteries, to save
energy the backlight only lights up briefly
when you adjust the controls on the set.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Adjusting the Sound
ULTRABASS
Volum e
ASS
TRAB
UL
This is another bass sound option. Press
ULTRABASS once or more to select
Turn the SO UND CO NTRO L
Ultrabass on or off (
).
CENTRE/VO LUME control clockwise
to increase or anti-clockwise to decrease
volume on the set (or press VO LUME 3
or 4on the remote control).
➜ When activated, the ULTRABASS
indicator lights up and the display shows
.
➜ Display shows the volume level
Notes:To prevent sound interference the bass
control options operate exclusively.You cannot
combine the bass from BASS/TREBLE with
ULTRABASS.
indication,
0-32.
and a number from
Bass & treble frequencies
–The display shows
or
to remind you if you attempt to use both bass
settings.
You can also press BASS on the remote
control to select Ultrabass on/off.
Mute
•
•
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback continues without sound and
ASS
TRAB
UL
To adjust the bass and treble frequency
levels, on the set press the BASS/
TREBLE button once or more until the
desired option is displayed.While the
BASS/TREBLE option is shown, turn the
SO UND CO NTRO L CENTRE/
VO LUME control to increase or decrease
(-5 to + 5 steps maximum) the desired
tone.
display shows
activated.
blinking when
To reactivate sound reproduction or cancel
MUTE you can:
– press MUTE again;
– adjust the volume controls;
– change source;
– switch the set off.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DigitalTuner
Tuning to Stations
Im proving reception
– For FM, pull out the telescopic antenna.
Incline and turn the antenna. Reduce its length
if the signal is too strong (very close to a
transmitter).
stereo
➜ Display shows
received in stereo.
if FM station is
M
/A
FM
o
re
GRAM
PRO
ste
SLEE
H
RC
SEA
UM
/ ALB
SET
PRE
– For AM the set is provided with a built-in
antenna so the telescopic antenna is not
needed. Direct the antenna by turning the
whole set.
DE
MO
CD
1
2
Press the POW ER y button.
Press SO URCE once or more to select
TUNER (or press TUNER once on the
remote control).
5
To switch off the tuner, press POW ER y.
Program m ing tuner stations
Store up to a total of 30 tuner stations in
the memory, manually or automatically.You
can also erase a preset station by storing
another frequency in its place.
➜ Display: shows
briefly followed
by waveband, frequency and preset
station number if already stored.
3
4
Press FM/AM once or more to select the
desired waveband.
Autostore
Automatic programming will start with a
chosen preset number. From this preset
number upwards, former programmed
tuner stations will be erased.The unit will
only program stations which are not in the
memory already.
Tuning to stations: you can tune to your
stations manually or by automatic search
tuning:
Press SEARCH ∞or §(or TUNING
5, 6on the remote control) and release
when the frequency in the display starts
running.
➜ The radio automatically tunes to a station
of sufficient reception. Display shows
during automatic tuning.
M
/A
FM
o
re
M
LAY
DISP
s
te
GRA
PRO
SLEEP
H
RC
SEA
UM
/ ALB
SET
PRE
DE
MO
CD
➜ Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press SEARCH
∞or §briefly and repeatedly until you
have found optimal reception.
1
Press PRESET / ALBUM - or once or
more to select the preset number where
programming should start.
+
Note: If no preset number is selected, default
is preset 1 and all your presets will be erased.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DigitalTuner
Maintenance
2
Press PRO GRAM for more than
2 seconds to activate programming.
Maintenance
➜ Display:
available are programmed in order of
waveband reception strength: FM,
followed by AM.The last preset
automatically stored will then be played.
appears. Stations
•
•
The lens of the CD player should never be
touched!
Sudden changes in the surrounding
temperature can cause condensation to
form and the lens of your CD player to
cloud over. Playing a CD is then not
possible. Do not attempt to clean the lens
but leave the set in a warm environment
until the moisture evaporates.
Manual program m ing
•
•
Always shut the CD door to keep the CD
compartment dust-free.To clean, dust the
compartment with a soft dry cloth.
M
/A
FM
o
re
M
ste
GRA
PRO
S
CH
SEAR
UM
/ ALB
SET
PRE
DE
MO
CD
To take a CD out of its box, press the
center spindle while lifting the CD.Always
pick up the CD by the edge and replace
the CD back in its box after use to avoid
scratching and dust.
1
2
Tune to your desired station
(see Tuning to stations).
Press PRO GRAM to activate
programming.
➜ Display: program and a preset number
flashes.
•
To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
3
4
Press PRESET / ALBUM - or once or
+
more to allocate a number from 1 to 30 to
this station.
•
•
•
Never write on a CD or attach any stickers
to it.
Press PRO GRAM again to confirm.
➜ Display: program disappears, and shows
the preset number, waveband and the
frequency.
Don’t expose the set, batteries or CDs to
humidity, rain, sand or excessive heat.
Clean the set with a dry cloth. Don’t use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these
may harm the set.
5
Repeat the above four steps to store other
stations.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3-CD/ CD Playback
Im portant Specifications
W hen burning the MP3-CD
To avoid problems with playback or missing
files, make sure the file names are typed in
English text characters and that the
MP3 files end with .m p3
•
•
Supported form ats:
•
Disc format ISO9660, Joliet and multi-
session CDs. Use ISO9660 disc format
when burning CD-ROM.
Use a writing software capable of recording
MP3 track titles (files) in numerical and
alphabetical order. For details on using the
software, refer to the operating instructions
of the software.
•
•
MP3 music formats.
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate.
•
•
650Mb and 700Mb CD-R and CD-RWs.
•
When recording on a CD-RW, make sure
that you close (finalize) all sessions in order
for the set to read and play your tracks.
Directory nesting up to a maximum of
8 levels (max. 64 characters).
General inform ation
How to organize MP3 files
You can store up to a maximum number of
35 albums and 350 titles on one MP3-CD.
The music compression technology MP3
(MPEG Audio Layer 3) reduces the original
digital audio data by a factor up to
10 without losing significant sound quality.
This allows you to record up to 10 hours of
CD-like quality music on a single CD-ROM.
Albums and titles are alphabetically sorted.
•
•
There may be an album 00 which will be
played before all other albums.Album 00
contains all the tracks which you did not
put into an album.
How to get MP3 m usic
Either download legal MP3 music from the
internet or convert your audio CD into MP3
format with any MP3 encoder software, and
then record onto a CD-R(W).
MP3-CD/ CD albums and titles are shown
as numbers in the display.
IMPO RTANT
This set does not play/support the
following:
•
To achieve a good sound quality a bit rate
of 128kbps is recommended for MP3 files.
Some encoder software offers an option to
protect music files, i.e. the files can only be
played on the computer which created
them. If you burn such files on a CD-ROM,
you cannot play them on this set. Make sure
to deactivate the protection option in the
encoder software before creating the music
files. In this case you are responsible for the
adherence to all local or international
copyrights.
•
•
UDF disc format.
Mixed format CD recordings e.g. CD audio
and MP3 tracks combined within a disc, as
you will only be able to playback the CD
audio tracks.
•
Empty albums: an empty album is an album
that does not contain MP3 files, and will not
be shown in the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3-CD/ CD Playback
•
Non-supported file formats are skipped.
This means that e.g.:Word documents .doc
or MP3 files with extension .dlf are ignored
and will not be played.
Playing MP3-CD & CD
This CD player plays Audio Discs including
CD-R(W)s, and MP3 CD-ROMs.
•
CD-I, CDV,VCD, DVD or computer CDs,
are not possible.
•
•
Playlist Files e.g. .m3u, .pls of WMA, AAC,
Winamp, Sonic, RealJukebox,
MS Mediaplayer 7.0, MusicMatch.
Recordings created on e.g. DirectCD,
PacketW riting and Package W riting.
Display indication for
M
/A
FM
all
DISP
SLEEP
H
RC
SEA
MP3-CD/ CD functions:
UM
/ ALB
SET
PRE
AM
GR
PRO
DE
MO
CD
–
–
–
: CD door open
: when reading disc contents
: when a MP3-CD is inserted:
MP3CD
1
2
Press the POW ER y button.
Press SO URCE once or more (or press
total album number and total track
number
CD
–
: when a CD is inserted: total track
CD once on the remote control) to select
number and total playback time
MP3-CD.
– During MP3-CD/ CD playback:
elapsed playback time of current album
and title / current track number
– Pause: when in pause mode
appears
➜ Display: shows
briefly.
3
4
To open the CD door, push the CD door.
Insert a CD or CD-R(W) with the printed
side facing up and press the CD door gently
close.
repeata
–
shuffle ,
, etc.: when the respective
mode is activated
– program : when MP3-CD/ CD program
is active
5
6
Press PLAY/PAUSE 2; to start playback.
To pause playback press PLAY/PAUSE 2;.
–
: program activated but
no title/ track selected
To resume, press PLAY/PAUSE 2;again.
7
8
To stop, press STO P 9.
–
–
: program memory full
: error in CD operation or
To switch off the set, press the POW ER y
with the CD/ CD-R(W) is blank or the
disc is not finalised (see Troubleshooting)
: program cancelled
button.
Note: MP3-CD/ CD playback will also stop
when:
– you press the CD door open;
– you selectTUNER source;
– the disc has reached to the end.
–
–
: scrolls across when
PRESET/ ALBUM - or pressed
+
during playback of normal CDs or an
MP3-CD with no album arrangement.
: no disc inserted
–
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3-CD/ CD Playback
MP3-CD/ CD text display
MP3-CDs only:
During playback, press the DISPLAY
button briefly and repeatedly to view text
information:
IR SENSOR
all
LAY
DISP
SLEEP
MP3-CDs
H
RC
SEA
M
BU
/ AL
SET
PRE
AM
GR
PRO
DE
MO
CD
Press DISPLAY to view e.g.
– album and track number;
– text details e.g. filename.
First press PRESET/ ALBUM or - once
+
CDs
or more to find your album.Then follow the
Press DISPLAY to view e.g.
next 3 steps to select your title.
– remaining playback time of current track;
– total number of tracks played and total
elapsed play time;
– remaining number of tracks and remaining
playback time.
MP3-CDs & CDs:
1
In the stop position, press SEARCH ∞or
§for a previous or next track until the
desired track number appears in the display.
2
3
During playback, press SEARCH ∞or §
for a previous or next track.
Selecting a different title/
track
During playback, press SEARCH ∞briefly
to return to the beginning of a current
track.
Finding a passage within a track
During playback, press and hold down
SEARCH ∞or §.
IR SENSOR
1
M
/A
all
LAY
DISP
SLEEP
H
SEARC
M
BU
/ AL
SET
PRE
AM
GR
PRO
DE
MO
CD
•
Display shows
and the disc is
played at high speed and low volume, but
sound will be muted for MP3-CDs.
In the stop position or during playback, you
can use SEARCH ∞or §,(¡or ™
buttons on the remote) to select your track.
➜ The text title (up to 10 characters) is
displayed briefly, or scrolls across when
you have selected a MP3-CD title.
2
When you recognize the passage you want
release SEARCH.
➜ Normal playback resumes.
Note: Searching is not possible for MP3 files
encoded with variable bit rate (VBR).
➜ Display shows
.
➜ If you have selected a track number in
the stop or pause position, press
PLAY/PAUSE 2; to start playback.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3-CD/ CD Playback
•
You can also press STO P 9to quit the
play mode.
Different play m odes: SHUFFLE and
REPEAT
CD MO DE allows you to select various
play modes.The modes can be selected or
changed during playback:
Program m ing track num bers
You may store up to 30 tracks in the
desired sequence. If you like, store any track
more than once.
shuffle – all tracks are played in random
order
repeatall
shuffle
– repeats the entire
IR SENSOR
MP3-CD/ CD in random order
M
/A
M
all
LAY
DISP
SLEEP
CH
SEAR
UM
/ ALB
SET
PRE
repeata
– plays the current track
M
GRA
PRO
DE
MO
CD
continuously
repeatall
– plays the whole MP3-CD/ CD
continuously
1
In the stop position, first select your album/
and tracks as follows:
MP3-CD only:
Press PRESET/ ALBUM - or once or
more to find your album (if available).
IR SENSOR
M
/A
M
•
•
•
•
2
+
all
Y
PLA
DIS
SLEEP
H
RC
SEA
M
BU
/ AL
SET
PRE
M
GRA
PRO
DE
MO
CD
Press SEARCH ∞or §to select your
track.
Continue with the following, steps 2-4.
1
During playback, select your play mode by
pressing CD MO DE once or more until
the desired play mode is shown (or press
SHUFFLE or REPEAT once on the
remote control).
CD:
Press SEARCH ∞or §to select your
track.
When your chosen track number appears,
press PRO GRAM once to store the track.
➜ Display shows program and:
for MP3-CD:
track number;
for CD:
•
Press PLAY/PAUSE 2;to start playback
if you have selected a play mode in the stop
position.
, the album and
•
•
You can use SEARCH ∞or §to skip
tracks during the shuffle/repeat modes.
and track number.
3
4
Repeat steps 1 and 2 to select and store all
desired tracks in this way.
The shuffle/repeat play options can be
combined and used with a program: e.g.
REPEAT ALL – repeats the entire
program in random order.
➜
is displayed if you
attempt to program more than 30 tracks.
To play your program, press
PLAY/PAUSE 2;.
2
To return to normal playback press CD
MO DE until the various shuffle/repeat
modes are no longer shown.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3-CD Playback
Sleep
To review a program
About Sleep
You may store up to 30 tracks in the
desired sequence. If you like, store any track
more than once.
This set has a built-in sleep timer, which
enables the set to be automatically
switched off after a set period of time.
There are four sleep time options.
•
In the stop position, press and hold down
PRO GRAM for more than 2 seconds.
➜ Display shows all your stored track
numbers in sequence, or the
Setting and switching off Sleep
MP3-CD/ CD track and album number.
Erasing a program
You can erase the contents of the memory
by:
M
/A
FM
all
SLEE
H
RC
SEA
M
BU
/ AL
SET
PRE
AM
GR
PRO
DE
MO
CD
– opening the CD door;
– pressing STO P 9: twice during playback/
once in the stop position;
– switching the set off or to TUNER
source.
1
During MP3-CD/ CD or TUNER
playback, press SLEEP repeatedly to
activate and select your sleep time.
➜ The display shows in sequence
➜ Display: shows '
' briefly when the
program is cancelled.
briefly and sleep
time options:
,
,
,
and
.
2
To cancel sleep, press either:
– SLEEP repeatedly until
appears;
– POW ER y.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair. Do
not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or
service center.
WARNING: Under no circumstances should you try to repair the set yourself, as this
will invalidate the warranty.
Problem
Solution
No sound/power
–Volume not adjusted. Adjust the VOLUME.
– Power cord not securely connected.
Connect AC power cord properly.
– Batteries dead /incorrectly inserted.
Insert (fresh) batteries correctly.
Display does not function
properly/ No reaction to
operation of any of the
controls
– Electrostatic discharge.
Switch off and unplug the set.
Reconnect after a few seconds.
INSERT CD or CHECK DISC – No CD inserted, insert a CD.
indication
– CD badly scratched or dirty.
Replace/ clean CD (see Maintenance).
– Laser lens steamed up.Wait until lens has cleared.
– CD-R(W) is blank or the disc is not finalized.
Use a finalized CD-R(W).
CD playback does not work
The CD skips tracks
– CD badly scratched/ dirty.
Replace/ clean CD (see Maintenance).
– Laser lens steamed up.
Wait until lens has acclimatized.
– Disc damaged or dirty. Replace or clean disc.
– SHUFFLE or a program is active.
Quit SHUFFLE / program mode(s).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Sound skips during MP3
playback
– MP3 file made at compression level exceeding
320kbps. Use a lower compression level to record
CD tracks into MP3 format.
– Disc damaged or dirty. Replace or clean disc.
MP3 tracks and album s are
not played in the order
they have been recorded
–This is not a fault. Playback of all MP3-CDs on this set
is sorted into alpabetical order.
Rem ote control does not
function properly/ cannot
turn on the set
– Set is switched off. Press POWER y button on the set
to switch on (See Switching POW ER on/off).
– Batteries dead /incorrectly inserted.
Insert (fresh) batteries correctly.
– Distance/ angle between the set too large.
Reduce the distance/ angle.
Cannot play/ find desired
MP3 titles
– Wrong file extension used and/ or filename unsuitable
text characters used. Make sure the file names are typed
in English text characters and that the MP3 files end with
.m p3 (See W hen burning the MP3-CD).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|