Philips Flat Panel Television 19HFL3330D 10 User Manual

Philips Hospitality LCD TV: Pro range  
EN 19HFL3330D/10  
EN 22HFL3330D/10  
Please ask your local sales support for additional information on correct installation/ positioning of the TV  
in the room and complementary accessories  
DFU-AUG2008  
PHILIPS  
PB1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 INTRODUCTION TO PBS MODE  
The Professional Business Solutions (PBS) mode defines a specific TV or monitor mode (similar to hotel mode).  
This mode limits the amount of TV controls (e.g. like volume limitation), that a normal user (i.e. hotel guest) can use.  
The amount of access can be configured in the setup menu by a super-user (e.g. hotel installer).  
This manual describes how to setup a television channels using Virgin Mode, configure other TV settings and activate  
the PBS mode.  
2.2 Guest Remote control  
22AV1104/10  
2 REMOTE CONTROL  
2.1 PBS Set-Up Remote control 2573  
(optional)  
1. On/Standby  
Switches the TV on from standby or back to  
standby.  
2. GUIDE  
(DVB-T)  
Toggles the Electronic Program Guide on or off.  
Only active with digital channels.  
Note: Setup mode should be selected for hotel  
3. SOURCE  
Selects connected devices.  
4. SUBTITLE  
installer.  
(DVB-T)  
Activates or deactivates subtitles.  
5. COLOUR KEYS  
Selects tasks or teletext pages.  
6. ALARM OFF  
Disable Alarm status - Not applicable for this  
model.  
PB3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. OK  
Accesses the All channels menu or activates a  
setting.  
8.  
Navigate the menu.  
9. SLEEP  
Display the sleep timer menu and adjust the sleep  
timer.  
10. P +/-  
Switches to the next or previous channel.  
11. NUMBER KEYS  
Selects a channel, page or setting.  
12.  
Selects a picture format.  
13. MHEG CANCEL  
Cancels digital text or interactive services (UK  
only).  
14.  
Mutes or restores sound.  
15.  
Increases or decreases volume.  
16. MENU/EXIT  
Toggles the menu on or off.  
17. ALARM ON  
Display the Alarm menu - not applicable for this  
model.  
18. TELETEXT  
Toggles teletext on or off.  
19.  
Splits the current channel or source on the left of  
the screen. Teletext appears on the right.  
PBS EN  
PB4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
entering direct channel numbers and channel  
name if needed.  
3 INITIAL SETUP  
1.1 Virgin mode – Out Of Box Setting and Initial  
Setup  
This TV set includes an installation feature that, at  
initial set-up of the TV, guides you through the  
installer menu to apply the proper installation settings.  
This feature, named Virgin Mode, active when the TV  
set is unpacked and first powered on, is normally  
used for installation/setting of first TV set. To save  
time during a complete setup for hospitality system  
with more televisions, the settings of this first TV set  
can be duplicated to other televisions using the  
cloning mechanism (described in chapters 4.6 and  
4.7).  
After setup/installation is completed, subsequent  
switching on the TV will not let this Virgin Mode menu  
to pop up again.  
For details refer to consumer TV User Guide.  
Preferred customer picture, sound and feature  
settings - these settings will be used whenever the TV  
is switched on from mains or standby in PBS Mode  
This can be achieved by popping up consumer TV setup menu  
as below and do Picture/sound setup and channel installation etc  
accordingly: Apart from manually adjusting picture settings, you  
can use Smart settings to set your TV to a predefined picture and  
sound setting.  
Please select your language  
Press OK or the green color key on your remote control  
to confirm  
Before setting PBS Mode to ON, and not  
using cloning as configuration mechanism,  
the television must be configured.  
For details refer to consumer TV User Guide.  
The installer should change the TV to Home mode by  
select Install > Preferences > Location  
Note: In case of cloning the TV settings,  
Virgin mode can be skipped by pressing the  
“Menu” button on the television twice.  
Follow the Virgin Mode guiding to set all  
channels/programs  
Digital Channels start at Program Number 1, Analogue  
Channels start at Program Number 900.  
Note:The channel list can be customized by hotel  
installer through Rearrange channel list feature  
as indicated below.  
Also rearrange channels can be easily done  
through using Rename Channels feature by  
PB5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1 PBS MODE  
4 DISPLAY SETUP MENUS  
The TV can display PBS Setup menu by pressing  
RC2573 MENU key in SETUP mode or by following  
Guest RC key sequence “319753 ”” key within 10  
seconds if high security mode set to Off.  
To activate PBS Mode, select ON.  
4.2 APPLICATION  
The Application to select is Hotel/Hospital or Business  
Monitor; this is based on the installer requirement.  
The following menu appears.  
When APPLICATION is Hotel/Hospital, the limited  
Guest TV menu can be accessed by guest as below:  
Refer to consumer TV User Guide for the description  
of each menu item.  
When APPLICATION is BUSINESS MONITOR, the  
normal consumer TV setup menu can be accessed by  
using guest RC menu key with the additional control  
features listed in the PBS setup menu.  
PB6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.3 SWITCH ON SETTINGS  
• WELCOME MESSAGE – Define welcome message  
of 2 lines of 20 alphanumeric characters each. The  
characters used depend on the language selected  
for consumer operation.  
SWITCH ON VOLUME - The TV will always switch  
on (via mains-switch or standby) to this preset value.  
The On volume setting cannot exceed the max  
volume. The current volume should follow the on  
volume, and adjusting on volume should also affect  
the current volume.  
The letters are entered and navigated through cursor  
keys and digit keys.  
• MAXIMUM VOLUME – refers to the maximum  
volume which the guest could adjust to.  
4.4 CONTROL SETTINGS  
• SWITCH ON CHANNEL – choice of channel  
number (analog or digital) or an external video  
source to go to when the TV set is switched on from  
mains power or standby. In case of LAST STATUS  
setting, the set will switch to the last channel or  
source before the TV went to standby or mains  
power off. This LAST STATUS setting takes priority  
over the APPLICATION settings.  
• POWER ON – Refers to power state after mains  
power on. ON means the set should turn On after  
mains power on, while Standby means the set  
should turn to standby. LAST STATUS means that  
the set should switch to the last power state before  
mains power off.  
• DISPLAY MESSAGE – Enable the display of the  
welcome message for 30 secs after switching on the  
set from mains power or standby. However, if OSD  
Display is OFF, the welcome message display is  
always disabled, regardless of the Display Message  
Setting  
• TELEVISION BUTTONS LOCKED – Selection of  
television buttons locked or unlocked. ON means all  
television buttons are locked, except the Power  
button, OFF means all television buttons are enabled,  
while ALL means all television buttons are locked,  
including the Power button.  
PB7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• REMOTE CONTROL LOCKED – Enable or disable  
the operation of the normal remotes. However, when  
the High Security Mode is OFF, to enter PBS Mode  
Menu, using the “319753 ”” key sequence is not  
blocked, even when Remote Control Locked is ON.  
• OSD DISPLAY – Enable or disable OSD display  
(e.g., channel number or name, sound mode, volume  
bar, clock, etc.).  
4.6 SMARTLOADER TO TV (using USB)  
• HIGH SECURITY MODE – choice between using  
normal consumer RC or PBS setup RC to display the  
setup menu. When enabled, only the setup RC menu  
key can display the setup menu. When disabled, both  
the setup RC menu key and normal guest remote  
control sequence “319753 ” can display the setup  
menu.  
• AUTO SCART – Enable (ON) or disable (OFF)  
autoscart switching or break-in in PBS mode.  
• LOW POWER STANDBY - define the power mode  
when TV set goes to standby by pressing RC power  
key or Local Keyboard power key - Green: TV will  
enter low standby power mode to achieve minimum  
power consumption; Fast: TV will enter semi-standby  
mode to achieve fast powering up,  
Copy TV configuration data (Video, Audio,  
Channel Table, PBS Mode settings) from USB  
Memory stick to TV. Upon copying progress  
completion, an indication message will feedback to  
PBS-user (“Settings copied to TV”).  
Note:During copying process, the USB memory stick  
should not be removed to prevent any undersigned  
functionality of the TV.  
Note:During this process, the cloning files  
NVM_MTK_2K8_EU.BIN and CH_MTK_2K8_EU.BIN  
are retrieved by TV and update the TV NVM and  
Channel setup accordingly.  
4.5 BLANK CHANNEL  
BLANK CHANNEL - choice of either blank or not  
blanking the video for the current channel. In PBS  
application, the blanked channel is used for off-air  
radio transmission, e.g., re-modulated FM radio,  
music CDs etc. The current blank mode should follow  
the channel blanked status and changing the channel  
blanked should also blank or unblank the current  
channel.  
Note:All RC command and local keyboard will be  
disabled during copying process  
Note:It is recommended to do a television switch  
off/switch on after the cloning is done.  
4.7 TV TO SMARTLOADER (using USB)  
Note:Channel Blank will apply for the current  
channel, to navigate and blank other channels,  
Blank channel submenu should be selected by  
clicking on right cursor key as below:  
Copy TV configuration data ( Video, Audio, Channel  
Table, PBS Mode settings[i.e.Welcome Message, …])  
from TV to USB drive.  
• Upon copying progress completion, an indication will  
given as feedback to PBS-user (“Settings copied to  
USB”)  
PB8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A 128MB USB Memory Stick with at least  
10MB free memory space will be suitable.  
5 HOW TO POSITION YOUR TV  
VIEWING ANGLE is the most convenient angle at  
which a display can be viewed with good visual  
performance  
Note:During copying process, USB drive should  
not be removed to prevent any undersigned  
functionality of the TV.  
Note:After completed, there are 2 files  
generated in the USB root directory -  
NVM_MTK_2K8_EU.BIN containing the general  
setting for example, Video/Audio, etc. and  
CH_MTK_2K8_EU.BIN containing the channel  
installation setting for example channel list, etc.  
Note:All RC command and local keyboard will  
be disabled during copying process  
Note: Normally, the first TV is manually  
configured/setup by the hotel installer, then all  
the data are transferred/ cloned to USB drive through  
TV to Smart Loader, subsequently, others TVs can be  
updated by using same USB drive. This cloning  
feature prevent multi manually setup on all the TV  
sets, hence, speed up the hotel installation process.  
How a TV and panel are designed:  
4.8 STORE  
Activation of this item will store PBS mode settings.  
The PBS mode setting will take effect after putting the  
set to standby.  
Important:  
Cloning system and configuration setttings, using  
USB or SerialXpress, is only supported in case of  
using equal televisions.  
What to do if viewing angle is not good enough:  
Add tilt (vertical) or swivel (horizontal) to the TV,  
in order to position the TV in the most optimal  
situation.  
If the TV is placed above a certain height, it’s  
advised to always tilt the TV.  
Philips has wall mounts with tilt for hotel TVs as  
optional accessories.  
Philips is recommending to position the TV as mentioned  
above. Positioning the TV differently might have impact  
on the viewing angle. Philips is not responsible for  
reduced viewing experience due to wrong viewing angle  
if the TV is positioned differently then recommended.  
PB9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABC  
© 2008 Koninklijke Philips Electronics N.V.  
All rights reserved.  
72-E330MD-X411A  
PB10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Register your product and get support at  
EN  
USER MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.8 Use subtitles . . . . . . . . . . . . . . . . . . . . 23  
5.9 Listen to digital radio channels. . . . . . 23  
5.10 Update your TV software . . . . . . . . . . 23  
Table of contents  
1
Important � � � � � � � � � � � � � � � � � � � � � � 3  
1.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
1.2 Screen care . . . . . . . . . . . . . . . . . . . . . .4  
1.3 Environmental care . . . . . . . . . . . . . . . .4  
6
Install channels � � � � � � � � � � � � � � � � � 2 4  
6.1 Automatically install channels. . . . . . . 24  
6.2 Manually install channels . . . . . . . . . . . 25  
6.3 Rearrange channels . . . . . . . . . . . . . . . 26  
6.4 Rename channels. . . . . . . . . . . . . . . . . 26  
6.5 Uninstall or reinstall channels. . . . . . . 27  
6.6 Manually update the channel list. . . . . 27  
6.7 Test digital reception. . . . . . . . . . . . . . 27  
2
3
YourTV � � � � � � � � � � � � � � � � � � � � � � � � 5  
2.1 TV overview . . . . . . . . . . . . . . . . . . . . .5  
Get started � � � � � � � � � � � � � � � � � � � � � 7  
3.1 Position the TV . . . . . . . . . . . . . . . . . . .7  
3.2 Wall mount the TV . . . . . . . . . . . . . . . .7  
3.3 Connect the antenna cable. . . . . . . . . .9  
3.4 Connect the mains cord. . . . . . . . . . . .9  
3.5 Manage cables . . . . . . . . . . . . . . . . . . .10  
3.6 Insert the remote control batteries. .10  
3.7 Switch on the TV. . . . . . . . . . . . . . . . .10  
3.8 First time setup. . . . . . . . . . . . . . . . . .10  
7
Connect devices � � � � � � � � � � � � � � � � 2 8  
7.1 Connection overview . . . . . . . . . . . . . 28  
7.2 Select connection quality . . . . . . . . . . 29  
7.3 Connect devices . . . . . . . . . . . . . . . . . 31  
7.4 Setup devices. . . . . . . . . . . . . . . . . . . . 35  
7.5 Use Philips EasyLink . . . . . . . . . . . . . . 35  
7.6 Prepare TV for digital services . . . . . . 36  
4
5
Use yourTV � � � � � � � � � � � � � � � � � � � 1 1  
4.1 Switch your TV on/off or to standby 11  
4.2 Watch TV. . . . . . . . . . . . . . . . . . . . . . .12  
4.3 Watch connected devices. . . . . . . . . .12  
4.4 Use teletext. . . . . . . . . . . . . . . . . . . . .12  
8
9
Technical specifications � � � � � � � � � � 3 7  
Troubleshooting � � � � � � � � � � � � � � � � 3 8  
9.1 General TV issues . . . . . . . . . . . . . . . 38  
9.2 TV channel issues . . . . . . . . . . . . . . . . 38  
9.3 Picture issues. . . . . . . . . . . . . . . . . . . . 38  
9.4 Sound issues . . . . . . . . . . . . . . . . . . . . 39  
9.5 HDMI connection issues. . . . . . . . . . . 39  
9.6 PC connection issues . . . . . . . . . . . . . 39  
9.7 Contact us. . . . . . . . . . . . . . . . . . . . . . 40  
Use more of yourTV � � � � � � � � � � � � 1 4  
5.1 Remote control overview. . . . . . . . . .14  
5.2 Use TV menus . . . . . . . . . . . . . . . . . . .15  
5.3 Adjust picture and sound settings . . .17  
5.4 Change to Shop or Home mode . . . .19  
5.5 Use advanced teletext features . . . . .20  
5.6 Use Electronic Programme Guide . . .20  
5.7 Adjust feature settings . . . . . . . . . . . .21  
10 Index � � � � � � � � � � � � � � � � � � � � � � � � � 4 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2008 © Koninklijke Philips  
performing source distribution, a  
complete machine-readable copy  
of the corresponding source code  
on a medium customarily used for  
software interchange.  
1. Remove fuse cover and fuse.  
Electronics N.V.All rights reserved.  
Specifications are subject to change  
without notice.Trademarks are  
the property of Koninklijke Philips  
Electronics N.V. or their respective  
owners.  
2. The replacement fuse must  
comply with BS 1362 and have  
the ASTA approval mark. If the  
fuse is lost, contact your dealer in  
order to verify the correct type.  
This offer is valid for a period of 3  
years after the date of purchase of  
this product.To obtain the source  
code, write to  
3. Refit the fuse cover.  
Philips reserves the right to change  
products at any time without being  
obliged to adjust earlier supplies  
accordingly.  
In order to maintain conformity  
to the EMC directive, the mains  
plug on this product must not be  
detached from the mains cord.  
Philips Innovative Applications N.V.  
Ass. to the Development Manager  
Pathoekeweg 11  
B-8000 Brugge  
Belgium  
The material in this manual is  
believed adequate for the intended  
use of the system. If the product, or  
its individual modules or procedures,  
are used for purposes other than  
those specified herein, confirmation  
of their validity and suitability must  
be obtained. Philips warrants that  
the material itself does not infringe  
any United States patents. No  
further warranty is expressed or  
implied.  
Copyright  
Compliance with EMF  
Koninklijke Philips Electronics N.V.  
manufactures and sells many  
products targeted at consumers,  
which, like any electronic apparatus,  
in general have the ability to emit  
and receive electromagnetic signals.  
VESA, FDMI and theVESA Mounting  
Compliant logo are trademarks of  
theVideo Electronics Standards  
Association.  
One of Philips’ leading Business  
Principles is to take all necessary  
health and safety measures for  
our products, to comply with all  
applicable legal requirements and to  
stay well within the EMF standards  
applicable at the time of producing  
the products.  
Warranty  
® Kensington and Micro Saver  
are registered US trademarks of  
ACCO World Corporation with  
issued registrations and pending  
applications in other countries  
throughout the world.All other  
registered and unregistered  
No components are user-  
serviceable. Do not open or remove  
covers to the inside of the product.  
Repairs may only be done by Philips  
Service Centres and official repair  
shops. Failure to do so shall void  
any warranty, stated or implied.  
Any operation expressly prohibited  
in this manual, any adjustments,  
or assembly procedures not  
Philips is committed to develop,  
produce and market products that  
cause no adverse health effects.  
trademarks are the property of their  
respective owners.  
Philips confirms that if its products  
are handled properly for their  
intended use, they are safe to use  
according to scientific evidence  
available today.  
recommended or authorised in this  
manual shall void the warranty.  
Pixel characteristics  
This LCD product has a high  
Philips plays an active role in the  
development of international EMF  
and safety standards, enabling Philips  
to anticipate further developments  
in standardisation for early  
number of colour pixels.Although  
it has effective pixels of 99,999% or  
more, black dots or bright points of  
light (red, green or blue) may appear  
constantly on the screen.This is a  
structural property of the display  
(within common industry standards)  
and is not a malfunction.  
integration in its products.  
Mains fuse (UK only)  
ThisTV is fitted with an approved  
moulded plug. Should it become  
necessary to replace the mains fuse,  
this must be replaced with a fuse of  
the same value as indicated on the  
plug (example 10A).  
Open source software  
This television contains open  
source software. Philips hereby  
offers to deliver or make available,  
upon request, for a charge no  
more than the cost of physically  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not insert any strange object into the  
ventilation slot.This might lead to damage  
of TV.  
1
Important  
Congratulations on your purchase and  
welcome to Philips!  
To avoid risk of fire or electric shock, do  
not place the TV, remote control or remote  
control batteries near naked flame sources  
(e.g. lighted candles) and other heat sources  
including direct sunlight.  
Read this user manual before you start to use  
this product.  
Pay close attention to this section and follow  
the safety and screen care instructions.The  
product warranty does not apply if damage is  
caused by failing to follow these instructions.  
Do not install the TV in a confined space  
such as a bookcase. Leave a space of at  
least 10cm (four inches) around the TV  
for ventilation. Be sure air flow is not  
obstructed.  
To fully benefit from the support that Philips  
offers, register your product at  
If placing the TV on a flat, solid surface be  
sure to use only the supplied stand. Do not  
move the TV if the stand is not properly  
screwed to the TV.  
The model and serial number of your TV can  
be found on the back and side of the TV as well  
as on the packaging.  
Wall mounting of the TV should only be  
performed by qualified personnel.The TV  
must only be mounted on an appropriate  
wall bracket and on a wall that can safely  
hold the weight of the TV. Improper wall  
mounting can result in severe injury or  
damage. Do not attempt to wall mount the  
TV yourself.  
If the TV is mounted on a swivel base or  
swivel arm, ensure no strain is placed on  
the power cord when the TV is swivelled.  
Strain on the power cord can loosen  
connections and cause arcing or fire.  
1�1 Safety  
The apparatus must be connected to a  
mains socket outlet with a protected  
earthed connection.  
If transporting the TV in low temperatures  
(less than 5°C), open the box and wait until  
the TV matches the ambient temperature  
of the room before unpacking.  
Disconnect the TV from the mains and  
antenna before lightning storms. During  
lightning storms do not touch any part of  
the TV, mains cord or antenna cable.  
To avoid short circuit, do not expose the  
TV, remote control or remote control  
batteries to rain or water.  
Be sure that you have full access to the  
mains cord for easy disconnection of the  
TV from the mains.  
Do not place vessels of water or other  
liquids on top of or near the TV. Spilling  
liquids on the TV can cause electric shock.  
If liquids are spilt on the TV, do not operate  
the TV. Immediately disconnect the TV from  
the mains and have the TV checked by a  
qualified technician.  
Permanent hearing loss can occur if you use  
earphones or headphones at high volumes.  
Though high volume may sound normal  
over time, it can damage your hearing.To  
protect your hearing, limit the amount of  
time you use earphones or headphones at  
high volume.  
EN-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When disconnecting the TV from the mains,  
be sure to:  
teletext pages, black bars or stock market  
tickers. If you must use stationary images,  
reduce the screen contrast and brightness  
to avoid screen damage.  
Turn off the TV, then the mains power  
(if available).  
Unplug the mains cord from the mains  
socket outlet.  
1�3 Environmental care  
Recycling your packaging  
The packaging of this product is intended to  
be recycled. Contact your local authorities for  
information on how to recycle the packaging.  
Disposing your used product  
Unplug the mains cord from the power  
connector at the back of the TV. Always  
pull the mains cord by the plug. Do not  
pull the mains cord  
Your product is manufactured with high-quality  
materials and components that can be recycled  
and reused.When you see the crossed-out  
wheel bin symbol attached to a product, it  
means the product is covered by the European  
Directive 2002/96/EC:  
1�2 Screen care  
Do not dispose your used product with  
household waste.Ask your dealer for  
information on how to safely dispose of the  
product. Uncontrolled waste disposal harms  
both the environment and human health.  
Disposing used batteries  
Turn off and unplug the mains cord before  
cleaning the screen. Clean the screen with a  
soft, dry cloth. Do not use substances such  
as household cleaning agents as these may  
damage the screen.  
The supplied batteries do not contain  
mercury or cadmium. Dispose supplied and all  
other used batteries according to your local  
regulations.  
To avoid deformations or colour fading,  
wipe off water droplets as soon as possible.  
Power consumption  
Do not touch, push, rub or strike the  
screen with hard objects as this may  
damage the screen permanently.  
The TV consumes minimal energy in standby  
mode to minimise environmental impact.Active  
power consumption is displayed at the back of  
the TV.  
Where possible, avoid stationary images  
that remain on-screen for extended periods  
of time. Examples include screen menus,  
For more product specifications, see the  
product leaflet at www.philips.com/support.  
EN-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Side connectors  
2
YourTV  
This section gives you an overview of  
commonly-used TV controls and functions.  
2�1 TV overview  
Side controls and indicators  
VOLUME  
4
3
MENU  
Use the TV side connectors to connect to  
mobile devices such as a high-definition  
camcorder or game console.You can also  
connect a pair of headphone.  
PROGRAM  
2
1
POWER  
Back connectors  
5
1. POWER  
DIGITAL AUDIO OUT  
2. PROGRAM +/-  
3. MENU  
EXT  
3
4. VOLUME +/-  
5. Power indicator/remote control sensor  
Use the TV back connectors to connect to the  
antenna and permanent devices such as a high-  
definition disc player, DVD player orVCR.  
D Note  
For more information about connections,  
see Section 7 Connect devices.  
EN-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
1. . Power  
2. SOURCE  
3. TELETEXT  
1
4. Colour keys  
From left, red, green, yellow, blue  
2
3
5. Í, Æ, Î, ï, OK  
Navigation or cursor keys  
4
6. MENU  
7. P +/-  
Program up or down  
8. +/-  
5
6
Volume up or down  
For advanced information about the remote  
control, see Section 5.1 Remote control overview.  
7
8
EN-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3�2 Wall mount theTV  
3
Get started  
B WARNING  
This section helps you position and install the  
TV and supplements the information provided  
in the Quick Start Guide.  
Wall mounting of theTV should only  
be performed by qualified installers.  
Koninklijke Philips Electronics N�V�  
bears no responsibility for improper  
mounting that results in accident or  
injury�  
D Note  
Refer to the Quick Start Guide for stand  
mounting instructions.  
B Step 1 Purchase aVESA-compatible  
wall bracket  
3�1 Position theTV  
Depending on the size of your TV screen,  
purchase one of the following wall brackets:  
In addition to reading and understanding the  
safety instructions in Section 1.1, consider the  
following before positioning your TV:  
TV screen VESA-  
Special  
The ideal viewing distance for watching TV  
is three times its screen size.  
size  
compatible  
instructions  
(inches/  
cm)  
wall bracket  
type  
Position the TV where light does not fall on  
the screen.  
(millimeters)  
22”/55.9cm  
19”/48.4cm  
Fixed 100 x 100 None  
Fixed 100 x 100 None  
Connect your devices before you position  
your TV.  
Step 2 Remove theTV stand  
Your TV is equipped with a Kensington  
Security Slot at the back of the TV. If  
connecting an anti-theft Kensington lock  
(not supplied), position the TV within reach  
of a permanent object (such as a table) that  
can be easily attached to the lock  
D Note  
These instructions are only applicable to  
TV models with mounted stands. If yourTV  
stand is not mounted, skip to Step 3 Connect  
cables.  
1. Carefully place the TV face down on a  
flat, stable surface that is covered by soft  
cloth.The cloth should be thick enough to  
protect your screen.  
DIGITAL AUDIO OUT  
EXT  
3
2. Using a cross-head screwdriver (not  
supplied), unscrew the four bolts that  
secure the stand to the TV. (19” has four  
bolts, 22” has three bolts)  
EN-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compatible wall bracket documentation for  
instructions.  
1. Locate the four mounting nuts at the back  
of the TV.  
3. Firmly pull the stand from the bottom of  
the TV. Place both the stand and bolts in a  
secure location for future reinstallation.  
2. Align the plate/bracket to the four  
mounting nuts, placing the spacers between  
the plate/bracket and the mounting nuts.  
3. Using a spanner, insert the bolts through  
the plate/bracket and spacers, tightly  
securing the bolts to the mounting nuts.  
Step 3 Connect cables  
Connect the antenna cable, mains cord and  
all other devices to the back of the TV as  
described in the following sections.  
x4  
Step 4 Secure theVESA-compatible wall  
bracket to theTV  
B WARNING  
Only use the bolts (M4 for all models)  
and spacers (4cm) to secure the  
VESA-compatible wall bracket to your  
TV�  
The bolts (not supplied) are designed  
to match the weight of yourTV;  
spacers (not supplied) are designed  
for easy cable management�  
4. Continue with the instructions provided  
with yourVESA-compatible wall bracket.  
D Note  
Depending on yourVESA-compatible wall  
bracket, you may need to separate the  
mounting plate from the wall bracket for  
easier installation. Refer to yourVESA-  
EN-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3�3 Connect the antenna cable  
1. Locate the TV ANTENNA connector at  
the back of the TV.  
2. Connect the mains cord to the AC IN  
mains connector.  
3. Connect the mains cord to the mains,  
ensuring that the cord is tightly secured at  
both ends.  
2. Connect one end of an antenna cable  
(not supplied) to the TV ANTENNA  
connector. Use an adaptor if the antenna  
cable does not fit.  
3. Connect the other end of the antenna  
cable to your antenna outlet, ensuring that  
the cable is tightly secured at both ends.  
3�4 Connect the mains cord  
B WARNING  
Verify that your mains voltage  
corresponds with the voltage printed  
at the back of theTVDo not insert  
the mains cord if the voltage is  
different�  
To connect the mains cord  
D Note: The location of the mains connector  
according toTV model.  
1. Locate the AC IN mains connector at the  
back or on the bottom of the TV.  
EN-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3�5 Manage cables  
3�7 Switch on theTV  
Route your mains cord, antenna cable and all  
other device cables through the cable holder  
(1) at the back of the TV.  
The first time you switch on the TV, check that  
the mains cord is properly connected.When  
ready, then press POWER on the side of the  
TV.  
D Note  
CertainTV models require you to press and  
hold POWER for up to two seconds.Your  
TV may take up to 15 seconds to start.  
1
3�8 First time setup  
When you turn on the TV set for the first  
time, a menu is displayed on screen.This  
menu prompts you to select the Country and  
Language for the menus:  
If the menu is not displayed, press the MENU  
key to display the menu.  
3�6 Insert the remote control  
batteries  
1. Slide the battery cover off the back of the  
remote control.  
1. Press Î or ï to select your language, and  
press OK to confirm your choice.  
2. Press Î or ï to select your country, and  
press OK to confirm your choice.  
The search starts automatically.All available  
TV programmes and radio stations are  
stored.This operation takes a few minutes.  
The display shows the progress of the  
search and the number of programs  
found.At the end of the search, the menu  
disappears.  
2. Insert the two supplied batteries (Size AAA,  
Type LR03). Be sure the + and - ends of the  
batteries line up with the markings inside  
the case.  
D Note  
If no programme is found, consult  
the possible solutions see section 9  
troubleshooting.  
3. Slide the cover back into position.  
D Note  
If the transmitter or cable network sends  
the automatic sort signal, the programs will  
be numbered correctly. In this case, the  
installation is complete.  
Remove the batteries if not using the  
remote control for an extended period of  
time.  
3. If this is not the case, use the Channel  
setting menu to number the programs  
correctly.  
EN-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
connected and powered.When not in use  
for extended periods of time, switch off and  
disconnect theTV from the mains.  
4
Use yourTV  
This section helps you perform basicTV  
operations. Instructions on advancedTV  
operations are provided in Section 5 Use more  
of yourTV.  
Switch on from standby  
4�1 Switch yourTV on/off or to  
standby  
Switch on yourTV  
If the power indicator (1) is off, press  
POWER on the side of the TV.  
If the power indicator is in standby (red),  
press . on the remote control.  
MENU  
D Note  
If you cannot locate your remote control  
PROGRAM  
and you want to switch on theTV from  
standby, press PROGRAM +/- on the side  
of theTV.  
POWER  
1
Switch off yourTV  
Press POWER on the side of the TV.The  
power indicator (1) switches off.  
Switch to standby  
Press . on the remote control.The power  
indicator switches to standby (red).  
E Tip  
Though yourTV consumes very little power  
when in standby, energy continues to be  
consumed as long as the mains remain  
EN-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mute audio from theTV speakers. Pressing  
VOLUME +/- buttons turns on theTV  
speakers again.  
4�2 WatchTV  
Switch channels  
4�3 Watch connected devices  
1. Switch on the device.  
2. Press SOURCE on the remote control.  
1. Press a number (1 to 99) or press P +/- on  
your remote control.  
2. Press PROGRAM +/- on the side controls  
of the TV.  
3. Press Î or ï to select the input your  
3. Press  
on the remote control to return  
device is connected to.  
to the previously-viewed TV channel.  
4. Press OK to select the device.  
Adjust volume  
4�4 Use teletext  
1. Press TELETEXT on the remote control.  
The main index page appears.  
1. Press + or - on the remote control,  
or Press VOLUME + or - on the side  
controls of your TV.  
To select a page with the remote control:  
2. Press [ on the remote control to mute  
the sound. Press [ again to unmute on  
the sound.  
Enter the page number with the number  
keys.  
Press P +/- or Î ï to view the next or  
D Note  
previous page.  
If headphones are connected, adjust  
headphone volume as described in Section  
5.3 Adjust sound settings.You must press the  
MUTE button on the remote control to  
Press a colour key to select one of the  
colour coded items at the bottom of the  
screen.  
EN-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E Tip  
Press  
to return to the previously  
viewed page.  
2. Press TELETEXT again to switch off  
teletext.  
D Note (for UK users only)  
Some digital TV channels offer dedicated  
digital text services (for example, BBC1).  
For advanced information on teletext, see  
Section 5.5 Use advanced teletext features.  
EN-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Colour keys  
5
Use more of yourTV  
Selects tasks or teletext pages.  
6. INFO  
Displays programme information, if available.  
5�1 Remote control overview  
7. OK  
Accesses the All channels menu or  
activates a setting.  
1
8. Í, Æ, Î, ï  
2
21  
20  
Navigate the menu.  
3
4
5
9. OPTION  
19  
Activates the Quick access menu.  
18  
17  
16  
6
10. P +/-  
Switches to the next or previous channel.  
7
8
11. Number keys  
Selects a channel, page or setting.  
9
12.  
Returns to the previously-viewed channel.  
13. MHEG CANCEL  
Cancels digital text or interactive services  
(UK only).  
15  
14  
10  
11  
14. [  
Mutes or restores sound.  
15. +/-  
Increases or decreases volume.  
16. MENU/EXIT/BROWSE  
12  
13  
Toggles the menu on or off.  
17. BACK  
18. GUIDE  
Toggles the Electronic Programme Guide  
on or off. Only active with digital channels.  
19. DEMO  
1. .  
Not Supported.  
Switches the TV on from standby or back  
to standby.  
20. TELETEXT  
Toggles teletext on or off.  
2. SOURCE  
Selects connected devices.  
21.  
Splits the current channel or source on the  
left of the screen.Teletext appears on the  
right.  
3. ∏  
Selects a picture format.  
4. SUBTITLE  
Activates or deactivates subtitles.  
EN-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the main menu  
5�2 UseTV menus  
The following steps of adjusting brightness is  
one example to show how to use the main  
menu.  
On-screen menus help you install your TV,  
adjust picture and sound settings and access  
other features.This section describes how to  
navigate the menus.  
Access the main menu  
1. Press MENU on the remote control to  
display the main menu.  
1. Press MENU on the remote control to  
display the TV menu.  
PHILIPS  
TV Menu  
Smart settings  
Picture  
Smart settings  
Personal  
Vivid  
The following menu appears.  
Sound  
Standard  
Movie  
Features  
Install  
PHILIPS  
Power saver  
TV Menu  
Smart settings  
Picture  
Smart settings  
Personal  
Vivid  
Sound  
Standard  
Movie  
Features  
Install  
Power saver  
2. Press ï to select Picture.  
PHILIPS  
TV Menu  
Smart settings  
Picture  
Smart settings  
Contrast  
Brightness  
Color  
2. Press Î or ï to move the cursor to the  
following items:  
Sound  
Features  
Install  
Sharpness  
Tint  
Smart settings  
Picture  
Color temperature  
Picture format  
Sound  
Noise Reduction  
Feature  
Install  
3. Press Æ or OK to select an item.  
4. Press MENU to exit.  
EN-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press Æ to enter the Picture settings.  
Use the Quick access menu  
The Quick access menu gives direct access to  
PHILIPS  
some often-needed menu items.  
Picture  
Contrast  
Brightness  
98  
47  
52  
4
D Note  
Brightness  
Color  
When digital channels are installed and  
broadcasted, the relevant digital options are  
displayed in the Quick access menu.  
Sharpness  
Tint  
0
1. Press OPTION on the remote control.  
Color temperature  
Picture format  
Noise reduction  
4. Press ï to select Brightness�  
PHILIPS  
Picture  
Contrast  
Brightness  
98  
47  
52  
4
2. Press Î or ï to select an option.  
Brightness  
Color  
Quick access  
Audio language  
Subtitle language  
Subtitle  
Sharpness  
Tint  
0
Color temperature  
Picture format  
Noise reduction  
Picture format  
Clock  
5. Press Æ to enter the Brightness setting.  
Brightness  
3. Press OK to display the selected option  
menu.  
4. Press Î, ï, Æ, Í to adjust the settings in  
the menu.  
5. Press OPTION to exit Quick access  
menu, or press MENU to exit the Main  
menu.  
6. Press Î or ï to adjust the setting.  
7. Press Í to return to the Picture settings  
or press MENU to exit.  
D Note  
More choices are available when digital  
channels are installed and broadcast.  
EN-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Noise reduction: Filters and reduces  
the noise in the picture. Select ON to  
enable or OFF to disable this function  
5�3 Adjust picture and sound  
settings  
Adjust picture settings  
Use smart settings  
1. Press MENU on the remote control and  
Apart from manually adjusting picture settings,  
you can use Smart settings to set your TV to  
a predefined picture and sound setting.  
select Picture.  
PHILIPS  
TV Menu  
Smart settings  
Picture  
Smart settings  
Contrast  
1. Press MENU on the remote control and  
select Smart settings.  
Brightness  
Sound  
Color  
2. Press Æ to enter the list.  
Features  
Install  
Sharpness  
3. Press Î or ï to select one of the following  
Tint  
Color temperature  
Picture format  
Noise Reduction  
settings:  
Personal: Applies manually selected  
picture and sound settings.  
Vivid: Applies brilliant picture and  
sound settings suitable for bright  
surroundings  
2. Press Æ to enter the list.  
3. Press Î or ï to select a setting:  
Standard: Applies natural picture and  
sound settings suitable for most living  
room conditions.  
Contrast: Changes the level of bright  
parts in the picture keeping the dark  
parts unchanged.  
Movie: Applies dynamic picture and  
sound settings suitable for a complete  
cinematic experience.  
Brightness: Changes the level of light in  
the picture.  
Power saver: Applies lower picture  
brightness and smaller sound for power  
economy.  
Colour: Changes the level of saturation.  
Sharpness: Changes the level of  
sharpness of fine details.  
4. Press OK to store your selection.  
Tint: Changes the colours to reddish  
or bluish.  
Colour temperature: There are 3  
items can be selected. Press Æ to enter  
the select menu. Press Î or ï to move  
to the item. Press OK to change to the  
selected colour temperature: Normal  
(balanced), Warm (redder), Cool  
(bluer).  
Picture format: See Section 5.3.3  
Change picture format.  
EN-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie Expand 16:9 (Not for HD)  
Change picture format  
Scales the classic 4:3  
format to 16:9.  
Change the picture format to suit your content.  
1. Press ∏ (PICTURE FORMAT) on your  
remote control.Alternatively, press MENU  
and select Picture > Picture format.  
D Note  
Constant use of the 16:9 picture format  
can cause screen distortion.  
Wide screen  
Stretches the classic  
4:3 format to 16:9.  
2. Press Î or ï to select one of the following  
picture formats:  
Super zoom (Not for HD)  
Removes the black  
bars on the side of  
4:3 broadcasts with  
minimal distortion.  
Subtitle Zoom  
Scales the classic 4:3  
format to 16:9 and  
capable to move up  
and down by press  
Î or ï keys to  
4:3 (Not for HD)  
Displays the classic  
4:3 format.  
show subtitle.  
D Note  
Constant use of the 4:3 picture format can  
cause screen distortion.  
Movie expand 14:9 (Not for HD)  
Scales the classic 4:3  
format to 14:9.  
EN-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust sound settings  
Mono/Stereo: If stereo broadcasting  
is available, choose between mono or  
stereo.  
This section describes how to adjust sound  
settings.  
Auto volume leveling: Reduces  
sudden volume changes, for example,  
during commercials or when switching  
from one channel to another. Select On  
or Off.  
1. Press MENU on the remote control and  
select Sound.  
2. Press Æ to enter the list.  
PHILIPS  
TV settings  
Smart settings  
Picture  
Sound  
5�4 Change to Shop or Home  
mode  
Settings  
Incredible surround  
Sound  
Volume - visually impaired  
Audio language  
Features  
1. Press MENU on the remote control and  
Install  
Dual l-ll  
select Install > Preferences > Location.  
Mono/Stereo  
2. Press Æ to enter the Location menu.  
Auto volume leveling  
3. Press Î or ï to select the TV mode:  
Shop: Sets smart settings to Vivid, ideal  
for a shop environment.The flexibility to  
change settings is limited.  
3. Press Î or ï to select one of the following  
settings:  
Home: Gives home users the full  
flexibility to change all TV settings.  
Settings:  
-Treble:To adjust the treble value to fit  
your best listening.  
4. Press OK to confirm.  
-Bass:To adjust the bass value to fit  
your best.  
5. Press MENU to exit.  
-Balance: Sets the balance of the left  
and right speakers to best fit your  
listening position.  
Incredible surround: Automatically  
switches the TV to the best surround  
sound mode available from a broadcast.  
Select On or Off.  
Volume-visually impaired:Adjusts the  
aids on volume settings.  
Audio language: Available for digital  
channels only, when multiple languages  
are broadcast. Lists available audio  
languages.  
Dual I-II: If available, choose between  
two different languages.  
EN-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5�5 Use advanced teletext  
features  
5�6 Use Electronic Programme  
Guide  
Your TV has a 100 page memory that stores  
broadcasted teletext pages and subpages.  
EPG is an on-screen guide that displays  
scheduled digital TV programmes.This guide is  
not available with analogue channels.You can  
navigate, select and view programmes.  
Select teletext subpages  
A teletext page can hold several subpages.  
Subpages are displayed on a bar next to the  
main page number.  
There are two types of EPG,Now and Next’  
and ‘7 or 8 day’ EPG. ‘Now and Next’ is  
always available but the ‘7 or 8 day’ EPG is  
only available in certain countries.  
1. Press TELETEXT on the remote control.  
2. Select a teletext page.  
With the EPG menu you can:  
View a list of currently broadcast digital  
programmes.  
3. Press Î or ï to select a subpage.  
Use dual screen teletext  
View upcoming programmes.  
Group programmes.  
Enabling dual screen teletext displays your  
channel or source on the left of the screen.  
Teletext is displayed on the right.  
Switch on EPG  
1. Press  
(DUAL SCREEN) on your  
remote control to enable dual screen  
teletext.  
D Note  
The first time you use EPG, you may be  
prompted to perform an update. If so,  
follow the on-screen instructions.  
2. Press  
again to display normal teletext.  
3. Press TELETEXT to switch off teletext.  
1. Press  
GUIDE on the remote control,  
the “Now and Next” EPG will appear and  
the detailed information about the current  
programme is displayed.  
C Caution  
Digital text services are blocked when  
subtitles are broadcasted and Subtitle On  
is set in the Features menu as described in  
Section 5.8 Subtitles.  
EN-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Use the colour keys on the remote control  
to activate available actions.  
5�7 Adjust feature settings  
1. Press MENU on the remote control and  
select Features�  
PHILIPS  
Viewing Date: 01/03/2002  
Current Time: 01/03/2002 Thu 16:49:22  
2. Press Æ to enter.  
2
BBC TWO  
16:30  
17:15  
Ready Steady Cook  
7
The Weakest Link  
BBC CHOICE  
BBCi  
10  
11  
12  
13  
800  
801  
PHILIPS  
BBC NEWS 24  
TV settings  
Smart settings  
Picture  
Features  
BBC PARLMNT  
BBC Knowledge  
Timer  
Auto lock  
Eurosport  
Sound  
Subtitle  
TERRA NOVA  
Features  
Subtitle language  
Common interface  
16:30 ~ 17:15  
Install  
Prev Day  
Next Day  
Detail  
Filter  
3. Use the colour keys to view 7 or 8 day  
EPG.  
Prev Day (Red): List the previous day’s  
EPG.  
3. Press Î or ï to select one of the following  
settings:  
Next Day (Green): List the next day’s  
EPG.  
Timer  
Auto lock  
Detail (Yellow): Display the description  
about this program.  
Subtitle  
Subtitle language  
Common interface  
Filter (Blue): Group programs.  
PHILIPS  
Viewing Date: 01/03/2002  
Current Time: 01/03/2002 Thu 16:49:22  
Use timers  
Take a couple of chefs, Paul Rankin and Phil vickery, add two  
contestants, throw in some ingredients and garnish liberally with  
Ainsley Harriott. Simmer and enjoy.  
Press MENU on the remote control and select  
Features > Timer > Clock.  
Auto clock mode: You can set current  
clock by manual or automatic:  
Manual: Allows you to enter the  
current time and day of the week by  
yourself  
Test  
Prev Page  
Next Page  
Return  
Automatic  
4. Press  
GUIDE to exit the EPG.  
Time zone: Adjusted time is based on  
GMT.  
EN-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatically switch theTV to standby  
(Sleeptimer)  
3. Use Î or ï , Æ or Í to select and enter  
the menu items to set the day of week.  
Sleeptimer switches the TV to standby after a  
defined period of time.  
4. Press OK to confirm.  
5. Press MENU to exit.  
1. Press MENU on the remote control and  
select Features > Timer > Sleeptimer.  
D Note  
You can always switch off yourTV earlier or  
reset Sleeptimer during the countdown.  
2. Press Æ to enter the Sleeptimer menu  
3. Press Î or ï to set the sleep time up to  
180 minutes in steps of five minutes. If set  
to zero minutes, the Sleeptimer is switched  
off.  
LockTV channels or connected devices  
(Auto Lock)  
Lock TV channels or connected devices with  
a four digit code to prevent children from  
watching unauthorised content.  
4. Press OK to activate the Sleeptimer.  
D Note  
You can always switch off yourTV earlier or  
reset Sleeptimer during the countdown.  
To set or change the Auto Lock code  
1. Press MENU on the remote control and  
select Features > Auto lock > Change  
code.  
Automatically switch theTV on  
(Start time)  
2. Press Æ to enter the code setup.  
Start time switches the TV to a specified  
channel at a specified time, from standby.  
3. Enter your code with the number keys.  
The Features menu reappears with a  
message confirming that your code is  
created or changed.  
1. Press MENU on the remote control and  
select Features > Timer > Start time.  
2. Press Æ to enter the start time menu.  
E Tip  
3. Use Î or ï, Æ or Í to select and enter  
the menu items to set a channel, day of the  
week, frequency and starting time.  
If you forget your code, enter ‘0711’ to  
override any existing codes.  
4. Press OK to confirm your choice.  
To enter the Auto Lock menu  
5. Press MENU to exit.  
1. Press MENU on the remote control and  
select Features > Auto Lock and press  
Æ to enter your code.  
E Tip  
To switch off Start time, select Off in the  
Start time menu.  
2. Enter your code with the number keys.  
To unlock all channels and connected  
devices  
Automatically switch theTV off  
(Stop time)  
1. In the Auto Lock menu, select Clear all�  
Stop time switches the TV to standby at a  
specified time.  
2. Press OK.  
1. Press MENU on the remote control and  
select Features > Timer > Stop time.  
2. Press Æ to enter the Stop time menu.  
EN-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To lock or unlock one or more channels  
and connected devices  
3. Press Î or ï to select On to display  
subtitles always or On during mute to  
display subtitles only when the sound is  
muted with the [ key on the remote  
control.  
1. In the Auto Lock menu, select Lock  
program.  
2. Press Æ to enter.  
4. Press OK to return to the Features menu.  
3. Press Î or ï to select channel lock�  
4. Press Æ to lock or unlock the channel.  
To set parental ratings  
Select a subtitle language on digitalTV  
channels  
Some digital broadcasters rate their  
programmes according to age.You can set your  
TV to display only programmes with age ratings  
higher than your child’s.  
D Note  
When you select a subtitle language on a  
digitalTV channel as described below, the  
preferred subtitle language set in the Install  
menu is temporarily overruled.  
1. In the Auto Lock menu, select Parental  
rating.  
1. Press MENU on the remote control and  
select Features > Subtitle Language.  
2. Press Æ to enter.  
2. Press Æ to enter the list of available  
3. Press Î or ï to select age rating.  
4. Select the age and Press OK.  
5. Press Menu to exit the menu.  
languages.  
3. Press Î or ï to select a subtitle language.  
4. Press OK.  
5�8 Use subtitles  
5�9 Listen to digital radio  
channels  
You can enable subtitles for each TV channel.  
Subtitles are broadcast via teletext or DVB-T  
digital broadcasts.With digital broadcasts,  
you have the additional option of selecting a  
preferred subtitle language.  
If digital broadcasting is available, digital radio  
channels are installed automatically during  
installation.To reorder the digital radio  
channels, see Section 6.3 Rearrange the channels.  
1. Press MENU on the remote control and  
1. Press OK on the remote control.The All  
select Features > Subtitle.  
channels menu is displayed.  
2. Press Æ to enter the list.  
2. Use the number keys to select a radio  
channel.  
PHILIPS  
TV settings  
Smart settings  
Picture  
Features  
3. Press OK.  
Timer  
Auto lock  
Sound  
Subtitle  
5�10 Update yourTV software  
Features  
Subtitle language  
Common interface  
Install  
Philips continuously tries to improve its  
products and we strongly recommend that  
you update the TV software when updates are  
availability.  
EN-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check your current software version  
6
Install channels  
1. Press MENU on the remote control and  
select Install Æ Current software info.  
The first time you setup your TV, you are  
prompted to select an appropriate menu  
language and to perform automatic installation  
of TV and digital radio channels (if available).  
Update software (digital broadcasts)  
If using (DVB-T) digital broadcasts, your TV  
automatically receives software updates. If you  
receive a message on-screen prompting you to  
update your software:  
This chapter provides instructions on how  
to reinstall channels as well as other useful  
channel installation features.  
Select Now (recommended) to update the  
software immediately.  
D Note  
Re-installing channels modifies the All  
channels list.  
Select Later to be reminded to update the  
software later.  
6�1 Automatically install  
channels  
Select Cancel to exit the update (not  
recommended).  
This section describes how to search and store  
channels automatically. Instructions are for both  
digital and analogue channels.  
PHILIPS  
Installation  
Languages  
Languages  
Menu language  
Country  
Preferred audio language  
Preferred subtitle language  
Hearing impaired  
Audio description  
Channel install...  
Preferences  
Source labels  
Decoder  
Current software info  
Factory reset  
Step 1 Select your menu language  
1. Press MENU on the remote control and  
select Install > Languages.  
2. Press Æ to enter Menu language.  
3. Press Î or ï to select your language.  
4. Press OK to confirm.  
5. Press Í to return to the Installation  
menu.  
EN-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In addition to menu language, you can  
configure the following language settings via the  
Languages menu (digital channels only):  
5. When the channel search is completed,  
press the red key to return to the  
Installation menu.  
Preferred audio language: Select  
one of the available audio languages as  
your preferred audio language. For more  
information, see Section 5.3 Adjust sound  
settings.  
6. Press MENU to exit.  
E Tip  
When digitalTV channels are found, the  
list of installed channels may display empty  
channel numbers. If you want to rename,  
reorder or uninstall stored channels, see  
Section 6.3 Rearrange channels.  
Preferred subtitles language: Select  
one of the available subtitle languages as  
your preferred subtitle language. For more  
information, see Section 5.8 Select a subtitle  
language on digital TV channels.  
6�2 Manually install channels  
This section describes how to search and store  
analogue TV channels manually. If you want to  
search and store digital channel, please kindly  
refer to Section 6.7.Test digital reception  
Hearing impaired: If available, select On  
to display the hearing impaired subtitle with  
your preferred language.  
Audio description: If available, select On  
to hear the audio description with your  
preferred language.  
Step 1 Select your system  
D Note  
Skip to Step 2 Search and store newTV  
channels if your system settings are correct.  
Step 2 Select your country  
Select the country where you are located.The  
TV installs and arranges channels according to  
your country.  
1. Press MENU on the remote control  
and select Install > Channel install� >  
Analogue: Manual installation.  
1. In the Installation menu, press ï to select  
2. Press Æ to enter the Channel  
installation menu, and System is  
highlighted.  
Country.  
2. Press Æ to enter the list.  
3. Press Æ to enter the System list.  
3. Press Î or to select your country.  
4. Press Í to return to the Installation  
PHILIPS  
menu.  
Analog: Manual installation  
System  
Channel installation  
Automatic installation  
Installation update  
Step 3 Install channels  
Search  
Digital: Test reception  
Analog: Manual installation  
Rearrange  
Fine tune  
Your TV searches and stores all available digital  
and analogue TV channels as well as all available  
digital radio channels.  
Store current channel  
Store as new channel  
1. In the Installation menu, press Î or ï  
to select Channel install� > Automatic  
installation.  
2. Press Æ to select Start now.  
4. Press Î or ï to select your country or  
3. Press OK.  
region.  
4. Press the green key to start.  
5. Press Í to return to the Channel  
The installation may take a few minutes.  
EN-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
installation menu.  
6�3 Rearrange channels  
1. Press MENU on the remote control and  
select Install > Channel installation >  
Rearrange.  
Step 2 Search and store newTV channels  
1. Press MENU on the remote control and  
select Install > Channel installation  
> Analogue: Manual installation >  
Search.  
2. Press Æ to enter the Rearrange list.  
3. Press Î or ï to select the channel you  
2. Press Æ to enter the Search menu.  
want to rearrange.  
3. Press the red key and the number keys on  
the remote control to enter the three digit  
frequency. Alternatively, press the green  
key to automatically search for the next  
channel.  
4. Press the yellow key to move the channel  
up the list, or press the blue key to move  
the channel down the list.  
5. Press MENU to exit.  
4. Press Í when the new channel is found.  
6�4 Rename channels  
5. Select Store as new channel, and press  
1. Press MENU on the remote control and  
select Install > Channel installation >  
Rearrange.  
Æ to enter.  
6. Press OK to save this channel.  
The channel number will is shown on the  
screen.  
2. Press Æ to enter the Rearrange list.  
3. Press Î or ï in the Rearrange list to  
7. Press MENU to exit.  
select the channel you want to rename.  
4. Press the red key.  
Fine tune analogue channels  
5. Press Í and Æ to select characters or Î  
and ï to change the characters. Space,  
numbers (0-9) and other special characters  
are located between z and A.  
You can manually fine tune analogue channels  
when reception is poor.  
1. Press MENU on the remote control and  
select Install > Channel installation >  
Analogue: manual installation > Fine  
tune.  
6. Press the green key or OK to finish.  
E Tip  
2. Press Æ to enter the Fine tune menu.  
3. Press Î or ï to adjust the frequency.  
4. Press Î when done.  
Delete all characters by pressing the yellow  
key. Delete only the highlighted character by  
pressing the blue key.  
5. Select Store current channel to store  
the fine tuned channel under the current  
channel number.  
6. Press Æ to enter.  
7. Press OK. Done appears.  
8. Press MENU to exit.  
EN-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6�5 Uninstall or reinstall  
channels  
6�7 Test digital reception  
If using digital broadcasts, you can check the  
quality and signal strength of digital channels.  
This allows you to reposition and test your  
antenna or satellite dish.  
You can uninstall a stored channel or reinstall  
an uninstalled channel.  
1. Press MENU on the remote control and  
select Install > Channel installation >  
Rearrange.  
1. Press MENU on the remote control and  
select Install > Channel installation >  
Digital:Test reception.  
2. Press Æ to enter the Rearrange list.  
2. Press OK.  
3. Press Î or ï to select the channel you  
3. Press the green key to automatically start  
the test or manually enter the frequency of  
the channel you want to test. If the signal  
quality and strength is poor, reposition the  
antenna or satellite dish and retest.  
want to uninstall or reinstall.  
4. Press the green key to uninstall or reinstall  
the channel.  
5. Press MENU to exit.  
4. When complete, press the yellow key to  
store the frequency.  
6�6 Manually update the channel  
list  
5. Press the red key to return to the  
Channel installation menu.  
You can manually update the channel list.  
6. Press MENU to exit.  
1. Press MENU on the remote control and  
select Install > Channel installation >  
Installation update.  
D Note  
If you have further problems with the  
reception of your digital broadcast, contact  
a specialised installer.  
2. Press Æ to enter the Installation update  
menu. Start now is highlighted.  
3. Press OK.  
4. Press the green key to start the update.  
This may take a few minutes.  
5. When the update is complete, press  
the red key to return to the Channel  
installation menu.  
6. Press MENU to exit.  
EN-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Connect devices  
7�1 Connection overview  
13  
6
1
7
8
9
DIGITAL AUDIO OUT  
EX
3
10  
11  
12  
5
2
3
4
Back connectors  
Side connectors  
1. EXT 1: First SCART connector for  
8. Headphones: Stereo mini-jack.  
DVD players,VCRs, digital receivers,  
game consoles and other SCART devices.  
Supports Audio L/R, CVBS in/out, RGB.  
9. VIDEO:Video input cinch connector for  
composite devices.  
10. AUDIO L/R:Audio L/R input connectors  
2. EXT 3: Component video (Y Pb Pr) and  
Audio L/R input connectors for DVD  
players, digital receivers, game consoles and  
other component video devices.  
for composite and S-Video devices.  
11. S-VIDEO: S-Video input connector for  
S-Video devices.  
3. DIAITAL AUDIO OUT  
D Note  
SPDIF sound output connector for home  
theatres and other audio systems.  
Item9, Item10, Item11 these 3 ports all are  
under EXT 2�  
4. TV ANTENNA  
12. HDMI Side:Additional HDMI connector  
for mobile high-definition devices.  
5. HDMI: HDMI input connectors for Blu-ray  
Disc players, digital receivers, game consoles  
and other high-definition devices.  
13. COMMON INTERFACE: Slot for  
Conditional Access Modules.  
6. AUDIO IN: Mini-jack connector for PC  
audio in.  
7. PC IN:VGA connector for PC in.  
EN-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
connectors on the back of the TV.Also, connect  
a Audio L/R cable to the red and white Audio  
L/R input connectors at EXT 3.  
7�2 Select connection quality  
This section describes how you can enhance  
your audio visual experience by connecting  
your devices with the best possible connectors.  
After connecting your devices, be sure to  
enable them as described in Section 7.4 Setup  
devices.  
HDMI - Highest quality  
Component video cable- Red, Green, Blue  
Audio L/R cable - Red,White  
SCART - Good quality  
HDMI produces the best audio visual quality  
possible. Both audio and video signals are  
combined in one HDMI cable, providing an  
uncompressed, digital interface between your  
TV and HDMI devices.You must use HDMI to  
experience full high-definition video.You must  
also use HDMI cables to enable Philips EasyLink  
as described in Section 7.5 Use Philips EasyLink.  
SCART combines audio and video signals in  
one cable.Audio signals are stereo, while video  
signals can be composite or S-Video quality.  
SCART does not support high-definition video  
and is analogue. One SCART connectors is  
provided on the TV, EXT 1.  
D Note  
Philips HDMI supports HDCP (High-  
bandwidth Digital Contents Protection).  
HDCP is a form of Digital Rights  
Management that protects high definition  
content in DVD or Blu-ray Discs.  
Component (Y Pb Pr) - Higher quality  
Component (Y Pb Pr) video provides better  
picture quality than S-Video or composite  
video connections.Though component video  
supports high-definition signals, picture quality  
is lower than HDMI and is analogue.  
When connecting a component video cable,  
match the cable colours to the EXT 3  
EN-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S-Video - Good quality  
An analogue connection, S-Video provides  
better picture quality than composite video.  
When connecting your device with S-Video,  
plug the S-Video cable to the S-Video  
connector on the side of the TV.You must  
connect a separate Audio L/R cable from  
the device to the red and white Audio L/R  
connectors on the side of the TV  
S-Video cable  
Audio L/R cable - Red,White  
Composite - Basic quality  
Composite video provides basic analogue  
connectivity, usually combining a (yellow) video  
cinch cable with (red and white) Audio L/R  
cinch cable. Match the cable colours when  
connecting to the compositeVideo and Audio  
L/R input connectors on the side of the TV.  
Composite audio/video cable -Yellow, red and  
white  
EN-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7�3 Connect devices  
This section describes how to connect various devices with different connectors and supplements  
examples provided in the Quick Start Guide.  
C Caution  
Disconnect the mains cord before connecting devices.  
D Note  
Different types of connectors may be used to connect a device to yourTV, depending on  
availability and your needs.  
Blu-ray Disc player  
For full high-definition video, connect a HDMI cable as illustrated:  
DIGITAL AUDIO OUT  
HDMI  
OUT  
Blu-ray Disc player  
DVD player  
For DVD video, connect a SCART cable as illustrated:  
DIGITAL AUDIO OUT  
EXT 3  
DVD Player  
EN-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Satellite receiver  
To receive analogue channels via antenna and digital channels via a satellite receiver, connect an  
antenna cable and SCART cable as illustrated:  
DIGITAL AUDIO OUT  
EXT  
3
Satellite receiver  
HD digital receiver  
To receive analogue channels via antenna and digital channels via a HD digital receiver, connect two  
antenna cables and HDMI cable as illustrated:  
DIGITAL AUDIO OUT  
HDMI  
OUT  
OUT  
IN  
HD Digital receiver / HD Satellite receiver  
Combined DVD recorder and digital receiver  
To receive analogue channels via antenna and record programs on a combined DVD recorder and  
digital receiver, connect two antenna cables and one SCART cable as illustrated  
DIGITAL AUDIO OUT  
OUT  
IN  
EXT  
3
DVD Recorder / Digital receiver  
EN-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Separate DVD recorder and receiver  
To receive analogue channels via antenna and record programmes on a separate DVD recorder  
and receiver, connect three antenna cables and one SCART cables as illustrated:  
DIGITAL AUDIO OUT  
EXT  
3
OUT  
IN  
DVD Recorder / Receiver / Cable box  
DVD recorder and home theatre system  
To receive analogue channels via antenna, output sound to a home theatre system and record  
programmes on a DVD recorder, connect two antenna cables, one SCART cable and two digital  
audio cables as illustrated:  
DIGITAL AUDIO OUT  
EXT  
3
DIGITAL  
AUDIO  
IN  
OUT  
IN  
DVD Recorder  
Home Theatre System  
D Note  
If using a home theatre or other audio system, the best synchronisation between images and  
sound is achieved by connecting the audio signal from your playback device to the TV first.  
Subsequently, channel the audio signal to the home theatre system or audio device via the audio  
connectors on the back of theTV.  
EN-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Game console or camcorder  
The most practical connection for a mobile  
game console or camcorder may be at the side  
of the TV.You can, for example, connect the  
game console or camcorder toVIDEO/S-Video  
and AUDIO L/R connectors at the side of the  
TV.A HDMI connector is also available for  
high-definition devices.  
VGA  
VGA  
A permanent game console or camcorder can  
be connected to a HDMI connector or EXT 3  
(component) connectors at the back of the TV.  
Personal Computer  
Before connecting the PC:  
Set the PC monitor refresh rate to 60Hz.  
See Section 8 Technical specifications for a list  
of computer resolutions.  
Change the TV picture format to Wide  
Screen as described in Section 5.3 Change  
picture format.  
To connect a PC to the back of theTV  
1. Using aVGA cable connect to PC IN  
connect on the back of your TV.  
2. Connect a Mini-jack audio cable from your  
PC to the AUDIO IN mini-jack connector  
at the back of the TV.  
EN-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7�4 Setup devices  
7�5 Use Philips EasyLink  
Assign a channel decoder  
Your TV supports Philips EasyLink, which  
enables one-touch play and one-touch standby  
between EasyLink-compliant devices. Compliant  
devices must be connected to your TV via  
HDMI and assigned as described in Section 7.4.1  
Assign devices to connectors.  
Decoders that decode digital channels can be  
connected to SCART.You have to assign the  
TV channel as a channel to be decoded.Then  
assign the connection where the decoder is  
connected.  
1. Press MENU on the remote control and  
select Install > Decoder.  
Enable or disable EasyLink  
1. Press MENU on the remote control then  
PHILIPS  
select Install > Preferences > EasyLink.  
TV Menu  
Smart settings  
Picture  
Smart settings  
Personal  
Vivid  
2. Select On or Off.  
Sound  
Standard  
Movie  
Use one-touch play  
Features  
Install  
Power saver  
One-touch play enables you to press the play  
button on, for example, your DVD remote  
control.This starts playback on your DVD  
device and automatically switches your TV to  
the correct source, displaying DVD content.  
2. Press Æ to enter the list.  
Use System standby  
3. Press Î or ï to select the channel to  
System standby enables you to press and hold  
the POWER button on, for example, your  
TV remote control.This switches your TV and  
all connected HDMI devices on or to standby  
mode.You can perform system standby using  
remote controls from any of the connected  
HDMI devices.  
decode.  
4. Press OK to select or unselect the channel.  
5. Press Í to return to the previous menu.  
6. Press MENU to exit.  
EN-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7�6 PrepareTV for digital  
services  
Scrambled digital TV channels can be decoded  
with a Conditional Access Module (CAM) and  
a Smart card provided by a digital TV service  
operator.  
The CAM may enable several digital services,  
depending on the operator and services  
you choose (for example, pay TV). Contact  
your digital TV service operator for more  
information about services and terms.  
D Note  
Do not remove the CAM from the slot.  
Using the Conditional Access Module  
B WARNING  
Removing the CAM will deactivate the  
digital services.  
Switch off yourTV before inserting  
a CAM� Be sure to follow the  
instructions described below�Wrong  
insertion of a CAM may damage both  
the CAM and yourTV�  
Access CAM services  
After inserting and activating the CAM,  
press MENU on the remote control and  
select TV menu > Features > Common  
interface.  
1. Following the directions printed on the  
CAM, gently insert the CAM into the  
Common Interface on the side of the TV.  
This menu option is only available if the CAM  
is correctly inserted and activated. On-screen  
applications and content are provided by your  
digital TV service operator.  
2. Push the CAM in as far as it will go.  
3. Turn on the TV and wait for the CAM to  
be activated.This may take several minutes.  
EN-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC IN: PC D-sub 15pins connector  
8
Technical  
specifications  
SPDIF OUT: Digital audio out (coaxial-  
cinch-S/PDIF). Display synchronised.  
Supported display resolutions  
Computer formats (PC)  
Connections (Side)  
Headphone out (stereo mini-jack)  
EXT 2:AUDIO L/R, CVBS in, S-Video in  
HDMI side  
Resolution  
720 x 400  
640 x 480  
640 x 460  
800 x 600  
1024 x 768  
1440 x 900  
1680 x 1050  
(22” only)  
Refresh rate  
70Hz  
60Hz  
67Hz  
60Hz  
60Hz  
60Hz  
Common Interface (CAM slot)  
Power  
Mains power:AC 100-240V (±10%)  
60Hz  
Power and standby power consumption:  
com  
Video formats  
Resolution  
480i  
Refresh rate  
60Hz  
Ambient temperature: 5°C - 35°C  
480p  
60Hz  
576i  
576p  
720p  
1080i  
50Hz  
50Hz  
50Hz, 60Hz  
50Hz, 60Hz  
Specifications are subject to change without  
notice. For detailed specifications of this  
1080p(HDMI only) 50Hz, 60Hz  
Tuner / Reception /Transmission  
Antenna input: 75ohm coaxial (IEC75)  
TV system: DVD COFDM 2K/8K  
Video playback: NTSC, SECAM, PAL  
DVB Terrestrial (see listed countries on the  
back of the TV)  
Remote control  
Type: RC-6  
Batteries: 2 x AAA size (LR03 type)  
Connections (Rear)  
EXT 1: (SCART) Audio L/R, CVBS in/out,  
RGB  
EXT 3: Component (Y Pb Pr),Audio L/R in  
HDMI  
TV ANTENNA  
AUDIO IN: Mini-jack audio in for PC.  
EN-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9�2 TV channel issues  
9
Troubleshooting  
Previously installed channels do not  
appear in the channel list:  
This section describes commonly-encountered  
issues and accompanying solutions.  
Verify that the correct list is selected.  
The channel may have been uninstalled to  
the Rearrange menu.To access the menu,  
press MENU on the remote control and  
select Install > Channel installation >  
Rearrange.  
9�1 GeneralTV issues  
TheTV does not switch on:  
Unplug the mains cord, wait for one minute  
and plug in the mains again.  
No digital channels were found during  
the installation:  
Verify that the mains cord is properly  
connected and that the mains are powered.  
Verify if the TV supports DVB-T in your  
country. See the listed countries on the  
back of the TV.  
The remote control is not working  
properly:  
Verify that the remote control batteries  
are correctly inserted according to the +/-  
orientation.  
9�3 Picture issues  
The power indicator is on, but there is no  
picture:  
Replace the remote control batteries if  
they are flat or weak.  
Verify if the antenna is connected properly.  
Verify if the correct device is selected.  
Clean the remote control and TV sensor  
lens.  
You forgot your code to unlock Auto  
Lock  
There is sound but no picture:  
Verify that picture settings are correctly set.  
Enter ‘0711’ as described in Section 5.7 Lock  
See Section 5.3 Adjust picture settings.  
TV channels or connected devices (Auto Lock).  
You receive poorTV reception from an  
antenna connection:  
TheTV menu is in the wrong language  
See Section 6.1 Automatically install channels  
for instructions on how to change the TV  
menu to your preferred language.  
Check that the antenna is properly  
connected to the TV.  
Loud speakers, unearthed audio devices,  
neon lights, high buildings or mountains can  
influence the picture quality.Try to improve  
the reception quality by changing the  
antenna direction or moving devices away  
from the TV.  
When turning theTV on/off/to standby,  
you hear a creaking sound from theTV  
chassis:  
No action is required.The creaking sound  
is normal expansion and contraction of the  
TV as it cools and warms up.This does not  
impact performance.  
Verify if the correct TV system is selected  
for your region. See Section 6.2 Manually  
install channels.  
You forgot your code to unlock Auto  
Lock  
If reception on only one channel is poor,  
try to fine tune this channel. See Section 6.2  
Fine tune analogue channels.  
Enter ‘0711’ as described in Section 5.5 Use  
advanced teletext features (Auto Lock).  
EN-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You receive poor picture quality from  
connected devices:  
There is picture but sound comes from  
one speaker only:  
Check that the devices are connected  
properly.  
Verify that Balance correctly set as  
described in Section 5.3 Adjust sound settings.  
Verify that picture settings are correctly  
set. See Section 5.3 Adjust picture settings.  
9�5 HDMI connection issues  
TheTV did not save my settings:  
You encounter problems with HDMI  
devices  
Verify that the TV is set to Home mode,  
which offers you complete flexibility to  
change settings. See Section 5.4 Change to  
Shop or Home mode.  
HDCP support can delay the time taken for  
a TV to display content from a device.  
If the TV does not recognise the device and  
the screen displays no picture, try switching  
from one device to another and back again  
to restart.  
The picture does not fit the screen, it is  
too big or too small:  
Try using a different picture format as  
described in Section 5.3 Change picture  
format.  
If you experience intermittent sound  
disruptions, check the user manual of the  
HDMI device to verify that output settings  
are correct.Alternatively, try connecting the  
audio signal from the HDMI device to the  
TV via AUDIO IN at the back of the TV.  
The picture position on screen is not  
correct:  
Picture signals from some devices do not  
fit the screen correctly. Check the signal  
output of the device.  
9�6 PC connection issues  
9�4 Sound issues  
The PC display on myTV is not stable or  
is not synchronised:  
There is picture but no sound from the  
TV:  
Check that a supported resolution and  
refresh rate is selected on your PC.  
See Section 8 Technical specifications for  
supported resolutions and refresh rates.  
D Note  
If no audio signal is detected, theTV  
automatically switches off audio output  
and does not indicate malfunction.  
Check that all cables are properly  
connected.  
Check that the volume is not set to 0.  
Check that the sound is not muted.  
There is picture but sound quality is  
poor:  
Check Sound settings as described in  
Section 5.3 Adjust sound settings.  
EN-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9�7 Contact us  
If you cannot resolve your problem, refer to the  
If the problem remains unresolved, contact the  
Customer Support Centre in your country as  
listed in this user manual.  
B WARNING  
Do not attempt to repair theTV  
yourself�This may cause severe injury,  
irreparable damage to yourTV or void  
your warranty�  
D Note  
Please have available yourTV model and  
serial number before contacting us.These  
numbers are available on the back and side  
of yourTV, as well as on the packaging.  
EN-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I
10 Index  
Install channels 24  
A
K
Analogue  
Channel installation 25  
Antenna  
Kensington lock 7  
L
Connect 9  
Language  
Audio language 19  
Automatic  
Audio 19  
Menus 24  
Subtitles 23  
Channel installation 24  
B
M
Back connectors 5  
Brightness 17  
Mains  
Connect 9  
Manual channel installation 25  
Menus  
C
Care  
Environment 4  
Channels  
Auto lock 22  
Language 24  
Mono sound 19  
Rename 26  
Test digital reception 27  
Uninstall 26  
Contrast 17  
Country  
N
Noise reduction 17  
P
Parental rating 23  
Picture  
Selection 25  
D
Adjust settings  
Brightness 17  
Colour 17  
Devices  
Watch 12  
Digital  
Radio 24  
Services 35  
Dual I/II 19  
Contrast 17  
Noise reduction 17  
Sharpness 17  
Position TV 7  
Power  
E
Connect 9  
Environmental care 4  
R
H
Radio channels 24  
Remote control  
Basic use 6  
HDCP 28, 29  
Hearing impaired 25  
Home mode 19  
Batteries 10  
Rename channels 26  
EN-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S
Timers  
Sleeptimer 22  
Screen care 4  
Settings  
Troubleshooting 37  
TV  
Picture  
Auto lock 22  
Cable management 10  
Channels  
Adjust settings 16  
Use smart settings 17  
Sound  
Favorite lists 20  
Connect  
Adjust settings 19  
TV location  
Antenna 9  
Mains 9  
Change location 19  
Setup devices 34  
Sharpness 17  
Shop mode 19  
Side  
Connectors 5  
Smart settings  
Current 17  
Connections  
Devices 31  
Quality 29  
Get started 7  
Main menus  
Use 15  
Overview 5  
Position 7  
Movie 17  
Standard 17  
Remote control  
Basic use 6  
Batteries 10  
Software update 24  
Stand 7  
Vivid 17  
Software update  
Check version 24  
Sound  
Adjust settings  
Audio language 19  
Dual I/II 19  
Subtitles 23  
Switch  
On 10  
Mono/Stereo 19  
Surround mode 19  
Stereo sound 19  
Subtitles  
Language 23  
Surround sound  
Mode 19  
Timers  
Sleeptimer 22  
Wall mount 7  
Watch  
Devices 12  
U
Switch TV  
Uninstall channels 26  
On 10  
V
System selection 25  
VESA-compatible wall bracket 7  
Video formats 37  
T
Technical specifications 37  
Teletext  
W
Advanced use  
Wall mount TV 7  
Teletext 2.5 20  
EN-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2008 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Stereo Amplifier 26 C User Manual
Philips Answering Machine CD450 User Manual
Philips Blu ray Player BDP5600 User Manual
Philips Digital Photo Frame SPF2107 12 User Manual
Philips Stereo System OTT2000 User Manual
Philips Telephone Accessories SDJ6012 User Manual
Philips Telephone SE 745 User Manual
Pioneer GPS Receiver AVIC X910BT User Manual
Polar Cyclometer FI 90440 User Manual
Poulan Lawn Mower 182080 User Manual