User Manual
6
Betriebsanleitung
100
cover_dvdr9000h_15541e.indd
1
2005-10-12 4:09:25 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
DK
VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AVOID
EXPOSURE TO BEAM
Advarsel: Usynlig laserstråling ved åbning
når sikkerhedsafbrydere er ude af funktion.
Undgå utsættelse for stråling.
ADVARSEL
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket
sidder i stikkontakten.
SYNLIG OG USYNLIG LASERSTRÅLING
VED ÅBNING UNDGÅ UDSÆTTELSE
FOR STRÅLING
VARNING
SYNLIG OCH OSYNLIG
LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO!
AVATTAESSA OLET ALTTIINA
NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASER SÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specificerats,
kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för
laserklass 1.
VORSICHT
SICHTBARE UND UNSICHTBARE
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET NICHT DEM
STRAHL AUSSETSEN
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför
ansluten till elnätet så länge stickproppen
sitter i vägguttaget.
ATTENTION
RAYONNEMENT LASER VISIBLE ET
INVISIBLE EN CAS D’OUVERTURE
EXPOSITION DANGEREUSE AU
FAISCEAU
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin
tässä käyttöohjeessa mainitulla tavalla
saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa
olla alttiina tippu-ja roiskevedelle.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Huom. Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkko-osa
on kytkettynä sähköverkkoon aina silloin,
kun pistoke on pistorasiassa.
Please act according to your local rules and do not dispose of your old products with
your normal household waste.The correct disposal of your old product will help
prevent potential negative consequences for the environment and human health.
Entsorgung Ihres Altgerätes (Deutsch)
Ihr Produkt ist aus hochqualitativen Materialien und Bestandteilen hergestellt,
die dem Recycling zugeführt und wiederverwertet werden können.
Falls dieses Symbol eines durchgestrichenen Müllcontainers auf Rollen auf
diesem Produkt angebracht ist, bedeutet dies, dass es von der Europäischen
Richtlinie 2002/96/EG erfasst wird.
Bitte informieren Sie sich über die örtlichen Sammelstellen für Elektroprodukte
und elektronische Geräte.
Bitte beachten Sie die lokalenVorschriften und entsorgen Sie Ihre Altgeräte nicht mit dem
normalen Haushaltsmüll. Die korrekte Entsorgung Ihres Altgerätes ist ein Beitrag zur
Vermeidung möglicher negativer Folgen für die Umwelt und die menschliche Gesundhei.
3
cover_dvdr9000h_15541e.indd
3
2005-10-12 4:09:28 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER
Type
Semiconductor laser
InGaAlP (DVD)
This product incorporates copyright
protection technology that is protected by
US patents and other intellectual property
rights. Use of this copyright protection
technology must be authorized by
Macrovision, and is intended for home and
other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
AIGaAs (CD)
658 nm (DVD)
790 nm (CD)
30 mW (DVD+RW write)
1.0 mW (DVD read)
1.0 mW (CD read)
84 degrees (DVD)
61 degrees (CD)
Wave length
Output Power
Beam divergence
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH
DEFINITIONTELEVISION SETS ARE FULLY
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER
SWITCHTHE CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS
REGARDING OURTV SET COMPATIBILITYWITHTHIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
U.S. Patent Numbers 4,631,603; 4,819,098;
4,907,093; 5,315,448 and 6,516,132.
CONTACT OUR CUSTOMER SERVICE CENTER.’
GUIDE Plus+, SHOWVIEW, VIDEO Plus+,
G-LINK are (1) registered trademarks or
trademarks of, (2) manufactured under
license from and (3) subject to various
international patents and patents applications
owned by, or licensed to, Gemstar-TV Guide
International, Inc. and/or its related affiliates.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
GEMSTAR-TV GUIDE INTERNATIONAL,
INC. AND/OR ITS RELATED AFFILIATES
ARE NOT IN ANY WAY LIABLE FOR THE
ACCURACY OF THE PROGRAM
SCHEDULE INFORMATION PROVIDED
BY THE GUIDE PLUS+ SYSTEM. IN NO
EVENT SHALL GEMSTAR-TV GUIDE
INTERNATIONAL, INC. AND/OR ITS
RELATED AFFILIATES BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF
PROFITS, LOSS OF BUSSINESS, OR
INDIRECT, SPECIAL, OR
Trade mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing
LLC.
CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE PROVISION
OR USE OF ANY INFORMATION,
EQUIPMENT OR SERVICES RELATING TO
THE GUIDE PLUS+ SYSTEM.
4
cover_dvdr9000h_15541e.indd
4
2005-10-12 4:09:28 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English------------------------------------------6
Deutsch--------------------------------------100
This product complies with the radio
interference requirements of the
European Community.
This product complies with
the requirements of the
following directives and
guidelines: 73/23/EEC +
89/336/EEC + 93/68/EEC
5
cover_dvdr9000h_15541e.indd
5
2005-10-12 4:09:28 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
General
Care and Safety Information ..........................................................................................8
Setup precautions.................................................................................................................................................8
Cleaning discs........................................................................................................................................................8
Hard Disk Drive (HDD) handling care..........................................................................................................8
Product Information ........................................................................................................9
Introduction...........................................................................................................................................................9
Accessories supplied ...........................................................................................................................................9
Region codes..........................................................................................................................................................9
Special features...................................................................................................................................................10
Product Overview
Main Unit ......................................................................................................................... 11
Remote Control........................................................................................................12~15
Using the remote control................................................................................................................................14
Controlling TV with the recorder’s remote control...............................................................................15
Connection
Step 1: Basic Recorder Connections......................................................................16~20
Connecting the antenna cables .............................................................................................................. 16~17
Connecting the video cable..................................................................................................................... 18~19
Connecting the audio cables.......................................................................................................................... 20
Step 2: Optional Connections.................................................................................21~25
Connecting to a Cable Box or Satellite Receiver .....................................................................................21
Connecting to a VCR or other similar device........................................................................................... 22
Connecting to a VCR and Cable Box/Satellite Receiver........................................................................ 23
Connecting to a camcorder ............................................................................................................................24
Connecting the digital input for 5.1-channel recording.......................................................................... 25
Step 3: Installation and Set-up .............................................................................. 26~27
Step 4: Set-up the GUIDE Plus+ system.............................................................. 28~29
GUIDE Plus+
Using the GUIDE Plus+ system............................................................................. 30~33
GUIDE Plus+ system introduction............................................................................................................... 30
Quick access functions .................................................................................................................................... 30
GUIDE Plus+ menu bar.............................................................................................................................31~33
Watch TV
Control TV Programmes ..............................................................................................34
Switching on to TV programme.................................................................................................................... 34
Pause live TV function...................................................................................................................................... 34
Instant replay function..................................................................................................................................... 34
FlexTime function.............................................................................................................................................. 34
Watching digital TV/radio broadcast........................................................................................................... 35
Viewing digital text service (MHEG) ........................................................................................................... 35
Recording
Before Recording..................................................................................................... 36~38
About temporary HDD storage/Time Shift video bar........................................................................... 36
Default recording settings ....................................................................................................................... 37~38
Record to Hard Disk................................................................................................ 39~45
Recording TV programmes .............................................................................................................................39
Simultaneous record and play function....................................................................................................... 40
Direct recording from TV ...............................................................................................................................41
Automatic recording from Satellite Receiver.............................................................................................41
About timer recording..................................................................................................................................... 42
Timer recording (GUIDE Plus+ system).................................................................................................... 42
Timer recording (ShowView / VIDEO Plus+ system)............................................................................. 43
Timer recording (manually)............................................................................................................................ 44
Changing/Deleting a timer recording.......................................................................................................... 45
6
dvdr9000h_eu_eng2.indd
6
2005-10-13 9:17:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Record to Hard Disk or recordable DVD............................................................. 46~49
Recording from a DV Camcorder .........................................................................................................46~47
Recording from camcorder............................................................................................................................ 48
Recording from an external device (VCR/DVD player)......................................................................... 49
Copy from Hard Disk to recordable DVD ........................................................... 50~51
About copying.................................................................................................................................................... 50
Discs for recording........................................................................................................................................... 50
Copying to a recordable DVD........................................................................................................................51
Disc Library
Using the Disc Library ...................................................................................................52
Storing the recorded DVD data in the Disc Library................................................................................52
Finding a recorded title.....................................................................................................................................52
Playback
Playback from Hard Disk........................................................................................ 53~54
Basic operation ..........................................................................................................................................................53
Sorting the titles display order............................................................................................................................. 54
Delete/Protect a title in the HDD............................................................................................................... 54
Playback from Disc.................................................................................................. 55~58
Playable discs .......................................................................................................................................................55
Starting disc playback................................................................................................................................55~58
Additional Playback Features ................................................................................ 59~64
Creating a slideshow playlist (album) ...................................................................................................59~60
Selecting another title/chapter/ track..........................................................................................................61
Searching forwards/ backwards.....................................................................................................................61
Pausing playback / slow motion play.............................................................................................................61
Repeat / Scan / Shuffle.......................................................................................................................................62
Using the Toolbar options.......................................................................................................................63~64
Edit Recordings
Edit Recordings - Hard Disk................................................................................... 65~69
Changing the title name................................................................................................................................... 65
Selecting the genre............................................................................................................................................ 65
Video editing................................................................................................................................................66~69
Edit Recordings - Recordable DVD ........................................................................70~74
About editing recordable DVDs....................................................................................................................70
Index Picture screen..........................................................................................................................................70
Deleting recordings/titles................................................................................................................................71
Protecting the recorded titles (DVD RW)...............................................................................................71
Changing the disc/title name.......................................................................................................................... 72
Making the edited DVD RW compatible.................................................................................................. 72
Finalising the DVD R for playback .............................................................................................................. 72
Video editing................................................................................................................................................ 73~74
Others
System Menu Options............................................................................................. 75~86
Recorder Preferences...............................................................................................................................75~77
Recorder Setup...........................................................................................................................................78~86
General Information ......................................................................................................87
Setting up Progressive Scan feature............................................................................................................. 87
Copyright notice................................................................................................................................................ 87
Frequently Asked Questions.................................................................................. 88~89
Firmware Upgrade .........................................................................................................90
Troubleshooting........................................................................................................91~95
Specifications ..................................................................................................................96
Glossary ...........................................................................................................................97
Display panel symbols/messages........................................................................... 98~99
7
dvdr9000h_eu_eng2.indd
7
2005-10-13 9:18:04 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Safety Information
CAUTION!
Cleaning discs
High voltage! Do not open.
You run the risk of getting an
electric shock.
Some problems occur (frozen picture,
sound disruptions, picture distortions)
because the disc inside the unit is dirty.
To avoid these problems, discs should be
cleaned on a regular basis.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualified
personnel.
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
Setup precautions
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifier).
– Do not put anything under the set (e.g.,
CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be reached
easily.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for discs.
Hard Disk Drive (HDD)
handling care
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4.5”)
clearance from the rear and the top of
the set and 5cm (2.3”) from the left and
right to prevent overheating.
The hard disk drive (HDD) has a high
storage density that enables long
recording duration and high speed data
access. Depending on the setup
environment and handling, some content
may be damaged resulting in failure of
playback and recording. To avoid damage
to the HDD and losing important data,
observe following precautions:
5cm (2.3")
10cm (4.5")
10cm (4.5")
– Do not move the recorder or subject
it to vibration.
5cm (2.3")
– Do not remove the AC power plug
from the mains socket without switching
the recorder to standby mode.
Avoid high temperatures, moisture,
water and dust
– Apparatus must not be exposed to
dripping or splashing.
– Do not place any sources of danger on
the apparatus (e.g., liquid filled objects,
lighted candles).
WARNING!
The HDD is not a device for storing
recorded content permanently. We
recommend that you copy the important
video content to a recordable DVD
disc as backup.
8
dvdr9000h_eu_eng2.indd
8
2005-10-13 9:18:04 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Information
Helpful Hints:
Introduction
– If you have questions or if problems come
up during operation, see the chapter
‘Troubleshooting’.
– If you need further assistance, please call
the customer support service in your country.
The corresponding telephone numbers and
e-mail addresses are given in the guarantee
booklet.
This recorder is equipped with a digital
tuner (DVB - Digital Video Broadcast) to
receive free-to-air digital terrestrial TV
signals and an analogue tuner to receive
analogue TV channels. It also has a built-in
Hard Disk Drive (400 GigaByte) that can
record up to 650 hours of video in SEP
(super extended play) record mode. This
gives you the flexibility to keep recordings
on the HDD or copy to a recordable
DVD for safekeeping or later viewing.
– Refer to the type plate at the rear or
bottom of the product for identification and
supply ratings.
Accessories supplied
In addition, it has a built-in GUIDE Plus+
system. The GUIDE Plus+ system offers a
free programme listings guide for all the
TV programmes available in your area.
You can also use the GUIDE Plus+
– Quick Start Guide
– RF coaxial cable
– Scart cable
– G-LINK transmitter
– Tuner interlink cable
– Remote control and batteries
– Power cable
system to programme your recorder to
record your favourite TV programmes.
Furthermore, you can take advantage of
features like ‘FlexTime’, ‘Instant Replay’,
or ‘Pause Live TV’; see page 35 for more
information.
Region codes
Before you can start using this
recorder, you must complete the
basic connection and set-up in four
easy steps.
DVD films are usually not released at the
same time in all regions of the world,
thus all DVD players/recorders are keyed
to a specific region code.
Step 1:
Step 2:
Step 3:
Step 4:
Basic recorder connections
(pages 16~20)
Optional connections for
other devices (pages 21~25)
Basic installation and set-up
(pages 26~27)
This device will only play
Region 2 DVDs or DVDs
manufactured to be played in all
ALL
regions ‘ALL’. DVDs from
other regions cannot be played
on this recorder.
GUIDE Plus+ set-up (pages
28~29)
2
Please take time to read this user manual
before using your recorder. It contains
important information and notes
regarding operation of the DVD
recorder.
9
dvdr9000h_eu_eng2.indd
9
2005-10-13 9:18:04 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Information (continued)
FlexTime
Special features
You can watch or recall a TV programme while
it is still being recorded. You do not have to
wait until the end of the recording before
starting playback. You can also watch a
different programme from the hard disk while
it is recording something else.
Philips provides the best possible connection
between your recorder and other home
cinema equipment. The recorder is controlled
by external devices (for example, receivers
and TVs) via Cinema Link and is automatically
set to the right system settings.
Pause Live TV
A live TV programme is now under your
control. You can pause the programme by
pressing PAUSE button and resume playback
at the scene it was interrupted by pressing
PLAY button. If you want to return to the live
TV programme, just press TUNER.
–
–
–
With this function you can align the sequence
of the channels on your TV (analogue only)
with those on your recorder. Make sure you
have connected the TV to the
Pixel Plus
Pixel Plus improves the detail, depth and
clarity level of video recordings from any
source via the digital HDMI connector. The
noise reduction and sharpness improvement
are applied automatically on the HDMI output
on any HDMI TV and Philips’ Pixel Plus TVs.
EXT1 TO TV-I/O socket of this recorder.
This function enables you to record a
programme from your Satellite Receiver or
any other devices. Make sure that the device is
connected to the EXT2 AUX-I/O socket of
this recorder, and the timer setting has been
done on the connected device.
–
–
i.LINK, is also known as ‘FireWire’ and ‘IEEE
1394’. This connection is used for the transfer
of high bandwidth digital signals as used by
digital video (DV) devices. It carries all audio
and video signals via a single cable.
Direct Record
This function allows you to instantly record the
programme (analogue TV channels only) you
see on the TV without tuning this recorder to
the same programme.
–
–
–
This is a simple programming system for
recorders. To use it, enter the programming
number associated with your television
programme. You can find this number in your
favourite listings magazine.
Time Shift Buffer
As soon as you turn on this recorder, the
programme showing on the TV will be stored
into the ‘Time Shift Buffer’. It acts as a
temporary HDD storage of your recordings.
The contents will be automatically deleted after
6 (six) hours or when you turn off this
recorder. To store the contents on the hard
disk permanently, you have to mark the section
in the ‘Time Shift Buffer’ for recording to
prevent them from being deleted.
–
–
The GUIDE Plus+ system lists your TV channel
programming information. You can use it to
schedule recordings, glance at upcoming
programme content, or change channels at
your external receiver/cable box using this
recorder’s remote control.
–
Instant Replay
You can repeat a scene of a live TV programme
by pressing REPLAY button on the remote
control, as often as you like. If you wish to return
to the live TV programme, just press TUNER.
10
dvdr9000h_eu_eng2.indd 10
2005-10-13 9:18:04 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Unit
a STANDBY-ON 2
k ꢀ
–
Turns the recorder on or to standby
mode.
–
Starts playback of the selected title/track.
/
b Display panel
–
Skips to the previous or next chapter/
track. Hold down the button to make a
reverse/forward search.
–
Shows information about the current
status of the recorder.
c PIXEL PLUS
ꢁ
–
Turns on/off the pixel plus picture
enhancement.
–
Stops playback/recording.
l Navigation cursor
d HDD BROWSER
Displays the content browser menu.
–
Selects the movement direction in the
menu. Press the centre knob to confirm
selection.
–
e SYSTEM MENU
Enters/Exits the system setup menu.
–
m TUNER
Toggles between analogue TV tuner,
–
f Disc tray
digital TV tuner and digital radio tuner.
g OPEN/CLOSE
–
Opens or closes the disc tray.
Sockets behind the flap
Flip down the door as indicated by the
PULL TO OPEN label at the right hand
corner.
h PAUSE
–
–
Pauses the playback or recording.
Press repeatedly to advance a paused
picture one frame at a time.
n DV IN
Inputs for digital camcorders using this
connector.
–
i REC
ꢀ
–
Starts recording the current TV
programme or the current video input
source.
o S-VIDEO
–
S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders.
–
Marks the title in the time shift buffer for
recording onto the HDD.
p VIDEO
Video input for camcorders or video
recorders.
j iR
Receives the signal from the remote
–
–
control. Point the remote control
towards this sensor.
11
dvdr9000h_eu_eng2.indd 11
2005-10-13 9:18:04 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
d INFO m
–
Displays the Time Shift video bar while in
1
tuner mode. It shows the timing of the
TV programmes stored in the temporary
HDD storage.
Accesses the programme details in the
GUIDE Plus+ system and when viewing
digital tuner information.
2
3
–
4
e ꢁꢀ: Cursor buttons for moving to the
left/right, or jump backward or forward
by a specified length of time in tuner
mode.
5
6
7
ꢂꢃ: Cursor buttons for moving up/
down or select previous/next title in the
temporary HDD storage during playback.
8
9
f OK
–
Confirms an entry or selection.
g SYSTEM
10
11
–
Enters/Exits the system setup menu.
h CH +-
–
While in tuner or camcorder mode,
selects the next or previous TV channel
or the external input source (EXT1,
EXT2, CAM1).
12
13
–
Skips to the next page up or down in the
GUIDE Plus+ system.
i HDD-BROWSER
Enters/Exits the content browser menu.
a2
–
–
Turns the recorder on or to standby
mode.
j TIMER
–
Enters/exits the timer recording menu.
b TV/HDD
(only applicable when using the EXT1 TO
k REC
ꢀ
TV-I/O scart socket to connect your TV)
Switches to the device that is connected
to the EXT2 AUX-I/O scart socket of
this recorder.
–
Starts recording the current TV
programme or the current video input
source.
–
–
Marks the title in the time shift buffer for
recording onto the HDD.
–
Toggles between the recorder and TV
mode if there is no video input signal
from EXT2 AUX-I/O scart socket.
l TEXT
Enters/exits the MHEG service
(interactive teletext - for UK only).
–
c SELECT DEVICE
–
Selects the active source mode: HDD,
SACD, AMP or TV.
m EDIT
Enters/exits the editing menu.
–
12
dvdr9000h_eu_eng2.indd 12
2005-10-13 9:18:04 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
n TUNER
Toggles between analogue TV tuner,
digital TV tuner and digital radio tuner.
–
o Colour coded buttons
–
These buttons are used to select the
coloured options available in some menu
displays on the TV screen.
14
15
16
p GUIDE
–
Enters/Exits the GUIDE Plus+ system.
q
–
(pixel plus)
Turns on/off the pixel plus picture
enhancement feature.
17
18
r TV VOL +-
–
Adjusts the volume of the TV (for Philips
TV with RC5 code only).
s Alphanumeric keypad
19
20
–
–
–
Enters numbers or letters in appropriate
entry fields.
Selects a chapter/track/title number to
play.
Selects the recorder’s preset tuner
channel.
21
22
23
24
25
26
t T/C
–
Toggles between ‘T’(title) and
‘C’(chapter) selection during disc
playback, then use the
keys to
select a title/chapter number.
a/A
x BACK
–
–
Toggles between upper and lower case
characters while using the alphanumeric
keypad.
Selects multiple photos in the thumbnail
menu.
–
Returns to the previous menu on a video
CD (VCD) or some DVDs.
y CAM
–
Accesses the camcorder mode (CAM2)
for DV camcorder recording.
u PLAY ꢀ
–
In camcorder mode, press CH +/-to
select other external input source
(CAM1, EXT1 or EXT2).
–
Starts playback of the selected title/track.
v STOP
ꢁ
–
–
Stops playback/recording.
Hold down this button to open or close
the disc tray.
z
–
(Day-/ Day+)
Skips to the previous or next day in the
GUIDE Plus+ system.
–
–
Skips to the previous or next title/
chapter/track.
Hold down this button for fast reverse or
fast forward search.
w PAUSE
Å
–
–
Pauses the playback or recording.
Press repeatedly to advance a paused
picture one frame at a time.
13
dvdr9000h_eu_eng2.indd 13
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
Using the remote control to
operate the system
Using the remote control
A Aim the remote control
directly at the remote
sensor (iR) on the front
panel.
B Select the desired function
(for example
,
).
A Open the battery compartment.
C To control other devices
using this remote control,
press SELECT DEVICE
to select the mode
B Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
you wish to control (for
example SACD, TV).
C Close the cover.
ꢂThe selected source mode
will light up on the LED panel for a few
seconds to confirm your selection.
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the alphanumeric keypad to
enter the characters
– Press a number button repeatedly until
the required character or the number
appears.
– To enter language-dependent
characters, press
or
on the
corresponding character, e.g.,: ‘å’ press
button {2} for ‘a’ and then press
‘å’ appears.
until
– To enter special symbols, press button
{1} repeatedly.
– To select upper/lower case (capital/
small) letters, press a/A.
– To enter a space, press button {1}.
14
dvdr9000h_eu_eng2.indd 14
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
Note: You must be in the TV mode to
perform above operations. If not, press
SELECT DEVICE to select ‘TV’ mode.
ControllingTV with the
recorder’s remote control
Additional control functions for
most of the Philips TV
This DVD recorder’s remote control has
a universal TV control function that
enables you to control the basic functions
of your TV (Power, Volume and Channel
Control), regardless of the TV’s brand.
TEXT
TIMER
BACK
Turns on/off the Teletext (TXT).
Turns on/off clock display.
Returns to the previous menu step.
Calls up the system menu from
the TV.
SYSTEM
ꢂꢃꢁꢀ
TUNER
Navigation keys in the TV menu.
Switches to TV internal tuner mode.
Helpful Hints
– Depending on the connected unit, you may
not able to control your TV or other devices with
some or all of the buttons mentioned above.
– When the batteries of the remote control
are removed, the code setting will be
retained for 5 (five) minutes during batteries
replacement. After five minutes without
batteries, the remote control will reset to its
default settings.
A Hold down digit keys {1} and {3}
together until the TV LED blinks twice.
B Within 10 seconds, enter digit key {0}
followed by the remote control’s three-
digit command code number (see last page
of this manual), based on your TV’s brand.
ꢂIf the code entered is valid, the TV
LED will blink twice.
Using the DVDR9000H remote
control together with the Philips
Cineos DVP9000S and DFR9000
The main functions of the DVP9000S and
DVFR9000 can be controlled with this
remote control (e.g. PLAY, TUNER,
SYSTEM).
ꢂIf more than one code number is
listed, try entering them one at a time.
C Turn on the TV and try to perform the
following operations using the recorder’s
remote control.
Additionally, the following functions are
enabled in the SACD and AMP modes to
allow maximum control of your Cineos
9000 series equipment:
If your TV does not react to the buttons
pressed, repeat steps 1 to 3 with another
code number listed for your TV’s brand
until you have found the correct code
that works with your TV.
ꢀ
Product
DFR9000
DVP9000S or
Philips SACD/
DVD players
DVDR9000H
AMP mode
SACD mode
Remote control
Operations
Buttons
T/C
Select main source:
SACD, DVD, SAT,
TV, GAME,
DISC MENU
Turns your TV on or off.
2
Adjusts the volume of your
TV.
TV VOL +/-
DVD+RW, HDTV
HDD
BROWSER
SURROUND
MODE
SOUND
MODE
CH +/-
Selects the TV programme
on your TV.
Digit keys (0-9)
15
dvdr9000h_eu_eng2.indd 15
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Basic Recorder Connections
cable satellite antenna
B
A
C
TV
Before you start ...
This recorder is equipped with two
tuners, one for digital TV reception and
one for analogue TV reception. If you
have a separate digital terrestrial aerial,
follow option 2. Otherwise, follow
option 1.
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a Cable Box or Satellite
Receiver, ensure that these devices are
turned on in order to watch or record
the cable programmes.
Option 1: Connecting to the
analogue antenna
A Connect the existing Antenna/Satellite
Receiver/Cable TV signal (labelled as RF
OUT or TO TV) to the ANTENNA
socket on the recorder.
If you want to connect to a VCR
and/or a separate Cable Box/
Satellite Receiver, see page 21~23 for
other possible connections.
ꢀ
B Use the supplied Tuner interlink cable to
connect the two ‘A’-sockets on the
recorder.
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or cable box or VCR), you’ll
have to disconnect some of the cables before
you make the antenna connection.
C Use the supplied RF coaxial cable to
connect the TV
socket on the
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
dvdr9000h_eu_eng2.indd 16
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Basic Recorder Connections (continued)
cable
satellite antenna
TERRESTRIAL
B
A
C
TV
Option 2: Connecting to the
analogue and terrestrial antennas
A Connect the existing Antenna/Satellite
Receiver/Cable TV signal (labelled as RF
OUT or TO TV) to the A-socket on the
recorder.
B Connect the digital terrestrial antenna to
the ANTENNA
socket on the
recorder.
C Use the supplied RF coaxial cable to
connect the TV socket on the
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– The integrated DVB tuner allows you to
receive digital terrestrial TV channels that will
preserve the high picture quality, see page
89 for more information.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
17
dvdr9000h_eu_eng2.indd 17
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Basic Recorder Connections (continued)
OR
OR
Option 3
Option 2
Option 1
TV
Helpful Hints:
Connecting the video cable
– If your TV displays a selection for the
SCART socket, select ‘VCR’ as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
This connection enables you to view the
playback from this recorder. You only
need to choose one of the options below
to make your video connection.
– For a standard TV, follow option 1, 2
or 3.
Option 2: Using the S-Video socket
– For a progressive scan TV, follow
option 4.
– For a HDMI TV, follow option 5.
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) socket on
the recorder to the S-Video input socket
(or labelled as Y/C or S-VHS) on the TV.
ꢂAudio connection is required in order
to hear the sound, see page 20.
ꢀ
Option 1: Using the Scart socket
Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
ꢂIf your TV has the Cinema Link
feature or a similar feature, ensure that
the scart cable is connected to the scart
socket that supports CINEMALINK on
your TV. All the available TV channels
(analogue only) will automatically be
downloaded to this recorder.
ꢀ
Option 3: Using theVideo (CVBS)
socket
Use a composite video cable (yellow - not
supplied) to connect the VIDEO (CVBS)
socket on the recorder to the video input
socket (or labelled as A/V In, Video In,
Composite or Baseband) on the TV.
ꢂAudio connection is required in order
to hear the sound, see page 20.
ꢀ
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
18
dvdr9000h_eu_eng2.indd 18
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Basic Recorder Connections (continued)
A
B
TV
Option 4: Connecting to a
Progressive ScanTV
Option 5: Connecting to a HDMI-
compatibleTV
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
HDMI (High Definition Multimedia
Interface) is a digital interface that allows
pure digital video transmission without
the loss of image quality.
A Use an HDMI cable (not supplied) to
connect the HDMI OUT on this
recorder to the HDMI IN on a HDMI-
compatible device (e.g. HDMI TV, DHCP
compliant DVI TV).
A Use the component video cables (red/
blue/green - not supplied) to connect the
OUT1- Y PB PR sockets on the
recorder to the corresponding
component video input sockets (or
labelled as Y Pb/Cb Pr/Cr or YUV) on
the TV.
B Once you have completed the necessary
connections, installation and set-up, see
pages 84~85 for optimum HDMI setting.
B Use an audio cable (red/white - not
supplied) to connect the OUT1-
Helpful Hints:
AUDIO L/R sockets on the recorder to
the audio input socket (or labelled as
AV IN or AUDIO IN) on the TV.
– Digital devices from different
manufacturers may have different output
standards which may result in unreliable
signal transfers.
– The HDMI connector is only compatible
with HDMI compliant devices and DVI-TV.
C Once you have completed the necessary
connections and the recorder basic
installation/set-up, turn on the
progressive scan feature, see page 87.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
19
dvdr9000h_eu_eng2.indd 19
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Basic Recorder Connections (continued)
OR
OR
AV amplifier/receiver
Option 2: Using the digital audio
socket (Optical or Coaxial)
Connecting the audio cables
You can connect the recorder to an AV
amplifier/receiver in order to enjoy
multichannel surround sound.
This connection enables you to listen to
the playback from this recorder.
However, this connection is not required
if this recorder is connected to the TV
using the Scart or HDMI connectors.
Use a coaxial cable (not supplied) to
connect the COAXIAL OUT socket to
the digital coaxial input socket (or
labelled as COAXIAL IN or DIGITAL IN)
of the connected device.
ꢀ
Option 1: Using the analogue audio
sockets
– an A/V receiver or amplifier with a
digital multi-channel sound decoder.
– a receiver with two-channel digital
stereo (PCM).
You can connect the recorder to a two
channel stereo system (mini system, TV)
or receiver in order to enjoy the stereo
sound system.
OR
Use an audio cable (red/white - not
supplied) to connect the OUT2-
AUDIO L/R sockets to the audio input
sockets of the connected device.
ꢀ
Use an optical fibre-optic cable (not
supplied) to connect the OPTICAL
OUT socket to the optical input socket
of the connected device.
ꢂMake sure that both plugs are fully
inserted (until a click is heard).
ꢀ
Helpful Hint:
– If you have connected this recorder to your
TV using the OUT1-Y PR PB sockets, then
connect the audio cables to the OUT1-
AUDIO L/R sockets as described in page 19.
TIPS: For option 2 connection, you have to set the appropriate Digital Audio Output setting, see
page 85. Otherwise, no sound or a loud noise may occur.
20
dvdr9000h_eu_eng2.indd 20
2005-10-13 9:18:05 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Optional Connections
Cable Box / Satellite Receiver
(back panel)
(front panel)
A
E
C
D
TV
B
Place this in front of the
Cable Box/Satellite Receiver, see E.
C Use another scart cable to connect the
Connecting to a Cable Box or
Satellite Receiver
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the Cable Box/
Satellite Receiver.
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
refer to “Connecting the antenna cables”
on page 16 for the complete connection
to your TV.
D Connect the supplied G-LINK cable to
the G-LINK socket on the recorder.
E Place the other end of the G-LINK
transmitter in front of the Cable Box/
Satellite Receiver near to the IR sensor
(remote sensor) so that its infrared
detector can receive a clear signal.
ꢂThis will enable the recorder to
receive data from the GUIDE Plus+
system and control the tuner of the
external receiver.
Option 2 (as shown on the above illustration)
If your Cable Box/Satellite Receiver
has a Scart output socket
A Keep the existing antenna connection
from the Cable Box/Satellite Receiver to
your TV.
Helpful Hint:
– If your TV is connected to the recorder via
the COMPONENT VIDEO (Y Pr Pb) sockets,
then connect the external cable box/satellite
receiver to the EXT1 TO TV-I/O socket.
B Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
TIPS: Refer to your optional connected devices’ user manual for other possible connections.
21
dvdr9000h_eu_eng2.indd 21
2005-10-13 9:18:06 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Optional Connections (continued)
Back of a VCR (example only)
VHF/UHF
RF IN
SCART IN
SCART OUT
cable satellite antenna
VHF/UHF
RF OUT
E
A
B
C
TV
D
C Use the supplied RF coaxial cable to
connect the TV socket on the
Connecting to aVCR or
other similar device
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
This connection enables you to record
from video tape to HDD and allows the
VCR to be used for playback on the TV if
the recorder is turned off.
D Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
E Use another scart cable to connect the
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the VCR.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to
your VCR.
Helpful Hints:
A Connect the existing Antenna/Satellite
Receiver/Cable TV signal (labelled as RF
OUT or TO TV) to the ANTENNA
socket on the recorder.
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the TV. If
there is a VCR or an additional device in
between, the picture quality may be poor
because of the copy protection system built
into this recorder.
B Use the supplied Tuner interlink cable to
connect the two ‘A’-sockets on the
recorder.
TIPS: Refer to your optional connected devices’ user manual for other possible connections.
22
dvdr9000h_eu_eng2.indd 22
2005-10-13 9:18:06 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Optional Connections (continued)
G
Back of a VCR
(example only)
Back of a Satellite Box
(example only)
A
F
B
C
D
E
E Use the scart cable to connect the
Connecting to aVCR and
Cable Box/Satellite Receiver
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
F Use another scart cable to connect the
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the VCR.
A Keep the existing antenna connection to
the Cable Box/Satellite Receiver.
B Use the supplied RF coaxial cable to
connect the antenna output (RF OUT)
socket on the Cable Box/Satellite
G Use another scart cable to connect the
Scart input socket (or labelled as TV IN
or TO DECODER) on the VCR to the
Scart output socket (or labelled as TV
OUT or TO VCR) on the Cable Box/
Satellite Receiver.
Receiver to the ANTENNA
socket
on the recorder.
C Use the supplied Tuner interlink cable to
connect the two ‘A’-sockets on the
recorder.
D Use another RF coaxial cable to connect
the TV
socket on the recorder to the
antenna input socket on the TV.
TIPS: Refer to your optional connected devices’ user manual for other possible connections.
23
dvdr9000h_eu_eng2.indd 23
2005-10-13 9:18:06 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Optional Connections (continued)
A
OR
B
Option 2: Using the S-VIDEO In or
VIDEO In socket
Connecting to a camcorder
Use the S-VIDEO connection if you have
a Hi8 or S-VHS(C) camcorder. It
provides very good picture quality.
You can use the front sockets to copy
camcorder recordings. These sockets are
located behind the flap on the right hand
side which provides convenient
Alternatively, you can use VIDEO
connections for a camcorder.
connection if your camcorder has only a
single video output (Composite Video,
CVBS). It provides good picture quality.
Option 1: Using the DV IN socket
Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
socket conforms to the i.LINK standard.
It provides the best picture quality.
A Connect the S-VIDEO or VIDEO
socket at the front panel of the recorder
to the corresponding S-VHS or Video
output socket on the camcorder.
ꢂPress CAM on the remote control
repeatedly to select ‘CAM1’ when using
this input source.
Use an i.LINK 4-pin cable (not supplied)
to connect the DV IN socket on the
recorder to the appropriate DV OUT
socket on the camcorder.
ꢀ
ꢂPress CAM on the remote control to
select ‘CAM2’ when using this input
source.
B Use an audio cable (red/white - not
supplied) to connect the AUDIO LEFT/
RIGHT sockets at the front panel of the
recorder to the audio output socket on
the camcorder.
Helpful Hints:
– You can also use the DV IN to connect
this recorder to a Personal Computer that
has a DV output socket. The PC must have
an IEEE 1394 Firewire connector.
– It is not possible to record from this
recorder to your camcorder via the DV IN
socket on your recorder.
Helpful Hint:
– If you connect your camcorder to the scart
socket at the rear of this recorder, press
CAM on the remote control to select
{ EXT1 } or { EXT2 } as the input source.
TIPS: Refer to your optional connected devices’ user manual for other possible connections.
24
dvdr9000h_eu_eng2.indd 24
2005-10-13 9:18:06 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Optional Connections (continued)
Back of a Satellite Box (example only)
DIGITAL
OUT
B
A
Helpful Hint:
– 5.1 channel recording is only possible in
HQ and SP recording mode.
Connecting the digital input
for 5.1-channel recording
This recorder is equipped with a digital
audio input socket that can support 5.1-
channel recording. It allows you to
capture the original sound from digital
multi-channel sources such as the Cable
Box/Satellite Receiver, when you record
a video that produces the full cinema
sound experience (Dolby Digital 2.0, 5.1,
DTS surround or DTS EX).
A Use a scart cable to connect the
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the Cable Box/
Satellite Receiver.
B Use a coaxial cable (not supplied) to
connect the COAXIAL IN on
the recorder to the DIGITAL or
COAXIAL output socket on the
connected Cable Box/Satellite Receiver.
ꢂ5.1-channel surround sound output
from the Cable Box/Satellite Receiver can
be recorded onto this recorder, along
with the video.
TIPS:
Before recording, you have to set the appropriate Audio Input setting, see page 85.
Otherwise, no sound or a loud noise may occur.
25
dvdr9000h_eu_eng2.indd 25
2005-10-13 9:18:06 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Installation and Set-up
The basic installation menu will appear the
very first time you turn on this recorder.
These settings will help you set up the
basic recorder features easily, including TV
programme installation, language settings
and the GUIDE Plus+ system.
LANGUAGE AND COUNTRY
Select language and country
Language
Country
English
A Austria
Done
Disc tray will not open until setup is completed
IMPORTANT!
C Select the country of your residence.
i. Highlight { Country } and press
NEXTÉ, then use ꢂꢃkeys to
select and press ꢁto confirm. If your
country is not available in the list,
select { Others }.
Complete the basic installation
settings before inserting a disc for
playback or recording. The disc tray
will not open until the basic setup is
completed.
ii. Highlight { Done } and press OK on
the remote control.
A Press STANDBY-ON 2to turn on
the recorder.
D The TV shape menu appears on the TV.
Select the appropriate TV shape
B Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
according to the TV you have connected.
ꢂYou may go to Channel 1 on your TV,
then press the Channel down button on
your TV’s remote control until you see
{ CINEMA LINK } or { LANGUAGE
AND COUNTRY } menu appear on
the TV.
TV SHAPE
Select TV shape in the way you want full-screen movies
to be displayed on your TV.
16:9
TV shape
Done
4:3 Letterbox
4:3 Panscan
Disc tray will not open until setup is completed
If your TV has Cinema Link or a similar
feature, downloading of the TV channels
(analogue only) will start automatically.
When the data transfer is complete,
press OK on the remote control to
continue with the time-date download.
Next go to step G.
ꢀ
i. Highlight { TV shape } and press
NEXTÉ, use ꢂꢃkeys to select
and press ꢁto confirm.
16:9
CIMEMA LINK
Loading data from TV.
4:3 Letterbox
4:3 PanScan
OR
If { Language and Country } menu
appears on the TV, use ꢂꢃkeys to
select the desired menu language and
press ꢁto confirm.
ꢀ
ii. Highlight { Done } and press OK on
the remote control.
TIPS: After completing the basic installation, you can change or update your settings using the system
setup menu, see page 78~86.
26
dvdr9000h_eu_eng2.indd 26
2005-10-13 9:18:06 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Installation and Set-up (continued)
E The Channel Search menu appears on the
H The time and date menu appears.
TV. Select { Search channels } in the
menu and press OK on the remote
control to start analogue channel search.
ꢂIt takes a few minutes to complete.
TIME AND DATE
Please check the Time (hh:mm) and Date and correct
if necessary.
Time
20:01
31-01-2005
OK
Date
CHANNEL SEARCH
Done
This will search and install all Analogue and
Digital channels and services.
Disc tray will not open until setup is completed
Search channels
Skip search
Start
OK
i. If the information is correct, select
{ Done } in the menu and press OK.
ii. If changes are required, use the
alphanumeric keypad 0-9 to enter
the correct time and date in the
respective field.
Disc tray will not open until setup is completed
Note: Make sure you have successfully made
all the required connections to this recorder,
the TV and Satellite Receiver/Cable Box (if
any) and turned them on. The channel search
will detect the signals and save all the available
programme channels.
I The basic installation is now completed.
Easy setup completed. Continue with the GUIDE Plus+
installation?
If no channels are found :
– Try the auto TV channel installation
after completing the basic setup, see page
81.
Continue
OK
OK
Donot install now
Disc tray will not open until setup is completed
F The recorder continues with the digital
channel search (TV and radio).
i. Select { Continue } in the menu and
press OK to start the GUIDE Plus+
installation. See next page for the
complete detailed setup.
CHANNEL SEARCH
Digital channel search.
This may take a few minutes. Please wait
Search channels
Skip search
15
ii. Select { Do not install now } in the
menu to skip the GUIDE Plus+
installation. The next time when you
want to install the GUIDE Plus+
system, press GUIDE on the remote
control, see next page.
Disc tray will not open until setup is completed
G After the channel search is finished, the
number of found and stored channels
(analogue TV, digital TV and digital radio)
appear, press OK to continue.
I Wait until the recorder has finished
initialising the system, then press OK to
exit.
CHANNEL SEARCH
Analogue TV channels found : XX
Digital TV channels found : XX
Digital Radio channels found : XX
You may now enjoy using this
recorder.
Check signal
Restart Search
Continue
OK
Helpful Hint:
– The TV programme listings do not appear
on the GUIDE Plus+ system as soon as you
complete the basic installation. It may take
up to 24 hours to receive TV listings data.
TIPS: After completing the basic installation, you can change or update your settings using the system
setup menu, see page 78~86.
27
dvdr9000h_eu_eng2.indd 27
2005-10-13 9:18:07 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Set-up the GUIDE Plus+ system
Your recorder is equipped with the
GUIDE Plus+ system. This system offers
a free interactive programme guide that
lists all the TV programmes available in
your area. Before you can enjoy this
feature, you have to define your
geographic location and your current
setup devices in order to receive correct
GUIDE Plus+ TV listing data.
{ Language } / { Country }
These settings will be taken from the
basic installation set up.
{ Postal code }
Press OK to access the entry menu. Use
ꢂꢃkeys to enter the local postal code
and use ꢁꢀkeys to move to previous
or next entry field.
Note: The postal code you enter must be
correct, and must represent a postal code in
the identified country. If not, you will receive
no or incorrect TV listings data.
IMPORTANT!
To use the GUIDE Plus+ system,
the analogue tuner has to be
installed properly.
{ External Receiver 1/2/3 }
Note: If you do not have an external receiver
connected, leave the fields as “None” and
press the Red button on the remote control
to exit the menu. Go direct to step H.
A If an introduction to the GUIDE Plus+
system appears on the TV, read the
contents and press OK to continue.
ꢂThe GUIDE Plus+ basic setup menu
appears.
You can connect up to three external
receivers (e.g., satellite receiver, cable
box) to this recorder. Complete the
installation of the external receiver as
follows:
Otherwise, press GUIDE on the remote
control, then press ꢂand press
NEXTÉrepeatedly until you select the
{ Setup } menu bar.
ꢀ
a) Use ꢂꢃkeys to select External Receiver
1, 2 or 3 and press OK.
b) Press OK again to continue. Select the type
of the external receiver and press OK.
{ Cable }
Select this for cable receiver, cable box.
{ Satellite }
Select this for satellite receiver.
{ Terrestrial }
Select this for digital terrestrial decoder
box.
B Press ꢃto select { Basic Setup } in the
menu and press OK to access the setup
screen.
c) Select the service provider from the list and
press OK.
{ None }
Select this if you do not have a provider.
d) Select the brand of your receiver from
the list and press OK.
{ None }
Select this if you do not find your brand.
TIPS: After completing the setup, leave the recorder in standby mode and turn on your external
receivers overnight to receive the TV listing data.
28
dvdr9000h_eu_eng2.indd 28
2005-10-13 9:18:07 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Set-up the GUIDE Plus+ system (continued)
e) Identify the socket through which your
I Once complete, press GUIDE to exit
external receiver is plugged into the
the menu.
recorder (for example ‘EXT 2’ for
1) Leave the recorder in ‘standby’
EXT2 AUX-I/O) and press OK.
mode during the night to load
the TV listing data.
2) If you use an External Receiver, you
have to tune your External Receiver
manually to your host channel, see
below table for details.
{ Antenna (RF lead) }
Select this if the external receiver is
connected via the antenna cable. Enter the
programme number which your external
receiver is tuned to on your recorder.
C If you have connected an external
receiver, ensure that the G-LINK
transmitter is properly connected and
positioned, see page 21.
Leave the External Receiver ‘ON’
overnight.
Note: If you tune to your Host Channel
before going into ‘standby’, your recorder will
start immediately to download TV listings data.
EPG DOWNLOAD will be shown in the
display panel. This process can take up to two
(2) hours. You can stop the download at any
time by turning the device ‘on’. Alternatively
you can leave the recorder in ‘standby’
ꢂThis will allow you to control the
tuner of the Satellite Receiver/Cable Box
through the GUIDE Plus+ system.
D Turn on the external receiver and use
the receiver’s remote control to
select programme number {02} on the
receiver.
overnight and your recorder will perform the
TV listings data download automatically.
Country/City
(Language)
Host Channel
(aerial / cable)
Host Channel
(SAT)
E Press OK to continue.
ꢂThe GUIDE Plus+ system is sending
signal via the G-LINK connection to the
external receiver to switch to a certain
programme number.
Deutschland
Österreich
Eurosport
Eurosport
Eurosport Astra1 19.2E
Eurosport Astra1 19.2E,
Hotbird 13.0E
Eurosport Astra1 19.2E
British Eurosport Astra2 28.2E
Schweiz (Deutsch) Eurosport
United Kingdom
France
España
ITV
Canal +
Tele 5
F If the external receiver has switched to
the programme number displayed on the
TV, select { Yes } and press OK.
Nederland
TMF/Eurosport
TMF Astra1 19.2E /
Hotbird 13.0E
TMF Astra1 19.2E
TMF Astra1 19.2E
TMF Astra1 19.2E
-Eindhoven
-Rotterdam
-Amsterdam
TMF
TMF
TMF
ꢂOtherwise, select { No } and press
OK to try a different code. Repeat this
process until the external receiver
België (Vlaanderen) TMF
Italia Sport Italia
switches to another programme number.
Check your TV listings line-up on the
{ Editor } screen the next day to ensure the
data download is completed, see page 33.
ꢀ
G Press the Green button to return to the
setup screen.
H If you want to specify the source and
programme number of a GUIDE Plus+
host channel, select { Host Channel
Setup } in the menu and follow the
instructions on the TV to complete the
setup.
Helpful Hints:
– If your country/region is not in the list above
or you are not able to receive TV listings data,
you can still use the GUIDE Plus+ system for
ShowView / VIDEO Plus+ and manual
recordings.
– If a problem comes up during the GUIDE
Plus+ system set-up, please visit the website
assistance.
ꢂThe default host channel setup is set
to ‘Automatic’.
TIPS: After completing the setup, leave the recorder in standby mode and turn on your external
receivers overnight to receive the TV listing data.
29
dvdr9000h_eu_eng2.indd 29
2005-10-13 9:18:07 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GUIDE Plus+ system
GUIDE Plus+ system
introduction
Quick access functions
There are several features integrated in
the GUIDE Plus+ system. These functions
will be displayed at the top Action Bar
whenever applicable. You can access the
function by pressing the matching colour
coded button on the remote control.
After the GUIDE Plus+ setup and data
download is completed, you can start to
explore the different features and areas
of the GUIDE Plus+ system.
C
A Press GUIDE on the remote control.
B Use ꢁꢀꢂꢃkeys to navigate in the menu.
C
D
B
E
F
A
Schedule recordings
Select a programme you wish to record
and press the Red button on the remote
ꢀ
ꢀ
control for
.
The GUIDE Plus+ system is divided in
six screen components:
ꢂYou can store up to 25 TV
programmes for recording.
A
Information Panels – Display instructions
on the GUIDE Plus+ system, programme
promotions and advertisements.
Select a specific channel
programme
B
Video Window – Shows the picture of the
current TV programme. You can continue
to watch the current programme while
entering the GUIDE Plus+ system.
Press the Yellow button on the remote
control for
to view the logos of
all the available channels in your area,
press OK to select.
C
Action Bar – Displays the available
functions. The action buttons are activated
directly with the respective colour coded
buttons on the remote control.
Helpful Hint:
D
E
Information Box – Displays short
programme descriptions or help menus.
– The shows you have scheduled for
recording can be reviewed and edited in the
‘Schedule’ screen, see page 32.
Menu Bar – Displays the GUIDE Plus+
menus and your current selection.
F
Grid/Tiles – Displays the TV listings
information by channel and time, seven
days in advance.
If certain channels are missing, go to the
{ Editor } screen to check and change
the channels, see page 33.
ꢀ
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
30
dvdr9000h_eu_eng2.indd 30
2005-10-13 9:18:08 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GUIDE Plus+ system (continued)
‘Search’ screen
GUIDE Plus+ menu bar
The Search screen allows you to locate
the programme listings by category. It
enables you to quickly and easily find
something of interest to watch or record.
The GUIDE Plus+ system consists of
seven areas in the menu bar:
Grid
Info
Search My TV Schedule
Editor Setup
A Press GUIDE on the remote control.
ꢂThe GUIDE Plus+ screen appears.
B Press ꢂto highlight the menu bar, then
press ꢁꢀto select a menu bar option
and press ꢃto access.
ꢂThe information on the individual menu
bar is described in the following pages.
A Select { Search } and press ꢃ.
B Use ꢁꢀkeys to select a search category:
{ Movies, Sport, Children, Others or
My Choice }.
‘Grid’ screen
The Grid screen is the main TV listings
screen of the GUIDE Plus+ system. It
provides you with seven days of TV
listings information.
C Use ꢂꢃkeys to select a sub-category and
press OK to start the search.
ꢂAll the programmes for the next
seven days in this sub-category are
displayed by date and time.
ꢂSelect { All } to receive results for all
sub-categories in this category.
D Use ꢁꢀꢂꢃkeys to select a programme
and press OK to start viewing.
To set your own search keywords:
A Select { My Choice } and press ꢃ.
B Press the Yellow button on the remote
A Use ꢂꢃkeys to select a desired TV
channel.
control for
.
Press CH +/-to scroll down/up a
page at a time.
ꢀ
C Use ꢁꢀꢂꢃkeys to enter your keyword
and press OK to confirm.
B Use ꢁꢀkeys to select a programme.
Press to go directly to the
D Press the Green button for
.
ꢀ
E Highlight your keyword and press OK to
previous day’s or the next day’s TV
listings.
start the search.
C Press OK to start viewing.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
31
dvdr9000h_eu_eng2.indd 31
2005-10-13 9:18:08 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GUIDE Plus+ system (continued)
‘MyTV’ screen
‘Schedule’ screen
The My TV screen allows you to set up a
personal profile. You can define the
profile by channels, categories and/or by
keywords. It enables you to quickly and
easily find something of interest to watch,
or record.
The Schedule screen allows you to
examine, delete and edit the scheduled
recordings. Additionally, you are able to
set a recording here using ShowView /
VIDEO Plus+ or Manual. See pages 43~44
for more information.
Note: In the UK and Ireland the ShowView
system is called VIDEO Plus+ system and
ShowView Programming Number is called
PlusCode Programming Number.
A Select { My TV } and press ꢃ.
B Press the Yellow button on the remote
control for
.
‘Info’ screen
C Use ꢂꢃkeys to select { Channel },
The Info screen is reserved for additional
information such as News, Weather
Reports, Stock Quotes, etc. The
information can be broadcast in the same
way as the TV listings data and may vary
by region.
{ Categories } or { Keywords }.
D Press the Yellow button for
.
{ Channel }
Select a channel from the ‘Channel’
screen and press OK.
ꢂRepeat this step to add more channels
ꢀ
ꢀ
ꢀ
(up to 16).
{ Categories }
Select a category from the ‘Search’
screen and press OK.
ꢂRepeat this step to add more
categories (up to 4).
{ Keywords }
Use ꢁꢀꢂꢃkeys to enter your
keywords and press OK to confirm.
ꢂRepeat this step to add more
keywords (up to 16).
If there are no categories available, no
data has been provided yet.
E Press OK to activate your profile.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
32
dvdr9000h_eu_eng2.indd 32
2005-10-13 9:18:08 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GUIDE Plus+ system (continued)
‘Editor’ screen
‘Setup’ screen
The Editor screen is the central location
for you to manage your channels. Every
change in the Editor leads to a change in
the Grid. You can assign programme
numbers to the TV channels, switch a
channel On or Off and select a channel
source (Tuner, Digital Terrestrial
The Setup screen is the central location
for you to configure the GUIDE Plus+
system according to your personal
situation (Region, TV reception). In
addition you have the option to set up
your Host Channel and to view the
GUIDE Plus+ system information screen.
Tuner-DTT, External Receiver).
Editor
For a detailed description of the GUIDE
Plus+ setup process, see pages 28~29.
A Select { Editor } and press ꢃ.
ꢂThe display of the Editor screen
depends on the specific TV reception
environment of your area.
To make changes to the Setup
A Select { Setup } press ꢃ.
To turn On/Off the channel
B Move to the left tile of the channel that
you want to change, then press Red
button on the remote control.
B Highlight { Basic Setup } and press OK.
C Move the highlight to the part that you
would like to change (Language, Country,
Postal Code, External Receiver 1, 2, 3)
and press OK.
ꢂThe ‘On’ channels’ programme listings
will be displayed in Grid screen.
D Follow the instructions on the TV to
make the necessary changes and press
OK.
To change the Source
C Move to the right tile of the channel that
you want to change, then press Red
button to change the source (e.g., Tuner,
DTT, Ext. Rec. 1, etc.).
ꢂSome changes might require a new
download of TV listings information. This
can take up to 24 hours.
ꢂThe programme number changes
automatically to reflect the new source.
To change the Programme Number
D Move to the right tile of the channel that
you want to change, then press the
Green button and use the
alphanumeric keypad 0-9 to enter the
programme number.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
33
dvdr9000h_eu_eng2.indd 33
2005-10-13 9:18:09 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Control TV Programmes
For more information about the
temporary HDD storage (Time
Shift Buffer), see page 36.
Switching on toTV
programme
Pause liveTV function
Sometimes, you might be interrupted
when watching your favourite TV
programme or match. Now, you can
pause the show by pressing
(PAUSE)
Å
on the remote control and press ꢀ
(PLAY) to resume playback. It behaves
exactly as if you were in control of the
live broadcast.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
If you want to return to the live TV
programme, just press TUNER.
B Press STANDBY-ON 2to turn on
this recorder.
C Press TUNER repeatedly to toggle
between analogue tuner (¡XX), digital
tuner (¡DXXX) and digital radio tuner
(¡RXXX).
Instant replay function
When watching a live TV programme,
you can press ꢁREPLAY on the
remote control to jump back 30 seconds
(default setting) upon every single press
for instant replay.
ꢂ‘X’ denotes the channel number.
D Press CH +/− to select a desired TV/
radio channel of the selected tuner.
ꢂThe active TV programmes will be
stored automatically onto the temporary
HDD storage in this recorder. The
information is shown on the Time Shift
video bar.
If you want to return to the live TV
programme, just press TUNER.
FlexTime function
If you switch to another TV channel on
the recorder, a new title will be created
and a vertical line will be shown on the
Time Shift video bar.
ꢀ
You do not need to wait until the
recording is completed before starting
playback.
While the recording is in progress, hold
down
on the remote control to go
You can choose to display or hide the
Time Shift video bar by pressing the
INFO mbutton on the remote control.
ꢀ
back to the beginning of the recording
and start playing from there.
TIPS: Press INFO on the remote control to display or remove the Time Shift video bar.
34
dvdr9000h_eu_eng2.indd 34
2005-10-13 9:18:09 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Control TV Programmes (continued)
Watching digitalTV/radio
broadcast
Viewing digital text service
(MHEG)
(for UK only)
This DVD recorder is able to receive
free-to-air DVB-T (Digital Video
Broadcast-Terrestrial) and radio stations.
As new services are added over time,
make sure to regularly update and install
new channels, see page 83.
Many digital TV channels broadcast
information via their text service. This
digital service includes high quality digital
text and graphics along with advanced
navigation options.
MHEG can only be activated if no
subtitles are shown on the screen.
A Press TUNER repeatedly to switch to a
digital TV or radio channel.
B Press CH +/− to select a desired TV/
Before you start...
radio channel of the selected tuner.
Turn off the subtitle using the toolbar
option (see page 63). This can also be
done by holding down the TEXT button
on the remote control until the subtitle
toolbar option appears. Press ꢃto
select { Off } in the menu and press ꢁto
confirm.
C While watching digital TV/radio broadcast,
you can have the following options:
Changing the subtitle/audio
language
This operation works only for broadcasts
with multiple subtitle/audio languages.
The subtitle/audio language can be
changed using the toolbar, see page 63.
Note: You can also hold down the TEXT
button on the remote control for quick
access to the subtitle option.
A Press TUNER repeatedly until ‘DXXX’
appears on the top of the screen.
B Press TEXT or the Red button on the
remote control.
C Once the text information is displayed,
you can use ꢁꢀꢂꢃkeys, the colour
coded buttons and/or the
Showing the programme
information
alphanumeric keypad 0-9 on the
remote control to access the required
information.
ꢂThe broadcaster decides the
appearance, content and navigation
methods of all digital text services.
Press INFO mand followed by the
Green button for { NOW NEXT } to
display the programme information
screen.
ꢀ
ꢂThe display consists of an information
box showing the description of the
current programme and the name of the
next programme of that channel.
ꢂTo view the programme information
on other channels, press the CH +/−.
D Press TEXT again to exit.
Helpful Hint:
– Not all TV channels transmit interactive
television application at all times.
[Red] "Record from here" [RECORD] Record program.
START REC
NOW NEXT
BACK
MORE INFO
TIPS: Press INFO on the remote control to display or remove the Time Shift video bar.
35
dvdr9000h_eu_eng2.indd 35
2005-10-13 9:18:09 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Recording
In addition, executing the following
actions will also clear the contents in the
temporary HDD storage :
– Press CAM on the remote control.
– Enter to { Setup } or { Record mode }
option in the system setup menu.
About temporary HDD
storage/Time Shift video bar
The current TV programme will be
stored in the temporary hard disk
storage called ‘TSB’ (Time Shift Buffer)
once the recorder is turned on. It will
continuously store up to 6 (six) hours of
TV programmes.
This action will clear the Time Shift Buffer.
Do you want to continue?
Yes
No
The Time Shift video bar will appear on
the TV. It indicates the status and timing
of the TV programmes stored in the
temporary HDD storage. You can
choose to display or remove the video
bar by pressing the INFO mbutton on
the remote control.
i) To proceed and clear the contents in
the temporary HDD storage, press
OK on the remote control to select
{ Yes } in the menu, OR
ii) Select { No } in the menu and press
OK on the remote control to abort.
21:00
23:13
Marking the contents for recording
You need to ‘mark’ the contents in the
temporary HDD storage before it can be
recorded to the hard disk drive (HDD),
see page 39.
The Time Shift video bar consists of the
following information:
a
The TV programme start time.
Once it has exceeded 6 (six) hours, the
beginning of the contents will be deleted
and the start time will be changed
accordingly.
To select a title (programme)
Press INFO mto show the overview
panel and use ꢂꢃkeys to select a title.
ꢀ
b
c
Remaining space in the temporary storage.
Clips that are selected to be recorded
onto the HDD (marked Red).
To find a scene within the title
Use ꢁꢀkeys.
ꢀ
ꢀ
d
e
Current position and time of the TV
programme broadcast.
Title markers (when you switch to a TV
channel for more than 1 minute, a new
title marker will be created)
To record the current programme
Press (RECORD) once. Press the
(RECORD) again to start a 30 minutes
recording.
ꢀ
ꢀ
f
g
Present time
Programme information
To mark for recording from the
current scene
Press the Red button.
Warning!
ꢀ
ꢀ
ꢀ
The temporary HDD can only store up
to 6 hours of TV programmes. All the
contents will be cleared when you press
STANDBY-ON 2to turn off the
recorder.
To cancel the marked recording
Press the Red button.
To end the recording
Press (STOP).
ꢁ
36
dvdr9000h_eu_eng2.indd 36
2005-10-13 9:18:09 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Recording (continued)
D Use ꢂꢃkeys to select the setting you
wish to change and press NEXTÉto
access its options.
Default recording settings
You can preset your recording settings in
the recording setup menu.
ꢂInstructions and explanation of the
options are provided in the following
pages.
ꢂIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
E To exit, press SYSTEM.
Record Mode settings chart
Record Mode
Hours of recordings can be stored on the Ł
HDD or an empty DVD recordable disc.
HDD
DVD R/
DVD+R Ł
(400 GB)
DVD RW
Double Layer
HQ (high quality)
SP (standard play)
80
1
2
2.5
3
4
1 hr 55 mins
3 hrs 40 mins
4 hrs 35 mins
5 hrs 30 mins
7 hrs 20 mins
11 hrs 5 mins
14 hrs 45 mins
160
200
250
330
500
650
SPP (standard play plus)
LP (long play)
EP (extended play)
SLP (super long play)
SEP (super extended play)
6
8
A Press SYSTEM on the remote control.
ꢂThe system setup menu appears.
Helpful Hints:
B Press ꢃto select { Preferences }.
– Changing the Recording Mode will clear
the contents in the temporary HDD storage,
only the marked contents (in red bar) will be
recorded onto the hard disk drive (HDD) of
this recorder.
C Press NEXTÉto select { Recording }.
Recording
Preferences
– You can record up to 500 titles on the
HDD if the hard disk capacity is sufficient.
Record mode
Language
SP
Lang I
Off
Auto protect
Chapters
Smart
Recording
Preferences
Sat record
Direct rec
Off
On
37
dvdr9000h_eu_eng2.indd 37
2005-10-13 9:18:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Recording (continued)
Recordings (underlined options are the factory default settings)
Record mode
The recording mode defines the picture quality of recordings and the
maximum recording time on the HDD (hard disk drive), see page 37 on
‘Recording Mode Setting Chart’.
Important! When copying from HDD to a recordable DVD, the
recording mode of the selected recording in the HDD will automatically
be transferred. Selecting another recording mode is not possible.
The factory default setting is SP.
Language
Selects the recording language to be used for TV programmes
(analogue TV channels only) which are transmitted an additional audio
language. For example, if a programme is available in English and Spanish,
with Spanish being the additional language option.
{ Lang I }
{ Lang II }
–
–
Original broadcast language.
Additional audio language.
Auto protect
Chapters
With this feature turned on, the new recording titles will be automatically
protected.
{ On }
{ Off }
–
–
Deletes and edits on the recorded titles are not possible.
Turns off the function.
Automatically divides a recording (title) into chapters by inserting chapter
markers at a specific interval. This enables you to access a specific point in
the recording quickly.
{ Off }
–
No chapter marker is inserted in the recording.
{ Standard } – Chapter markers are inserted automatically during
recording at approximately 5 (five) minutes interval.
{ Smart }
–
This setting is only available for the DV camcorder
recording. A chapter marker is inserted whenever
there is a break in the recording, for example, when
the recording is stopped or paused and restarted again.
SAT record
Direct rec.
This feature is only available if you have connected a Satellite Receiver or
other devices to the EXT 2 AUX-I/O scart socket of this recorder, see
page 41 for more information.
{ Off }
{ EXT2 }
–
–
Turns off the function.
Enables this recorder to start and stop recording when
a signal is received from the connected device.
With this feature, you can immediately record the programme that you
are viewing on the TV by pressing REC button without the needs of
turning on this recorder, see page 41 for more information.
{ On }
{ Off }
– Enables recording directly from the TV display.
– Turns off the function.
38
dvdr9000h_eu_eng2.indd 38
2005-10-13 9:18:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk
IMPORTANT!
Unrecordable pictures
If the TV programme data is available in
the GUIDE Plus+ system
ꢂ“Record 1 Program” will appear at the
right end of the video bar. The recording
will stop automatically at the end of the
TV programme.
ꢀ
ꢀ
Pictures with copy protection cannot be
recorded on this recorder. When the
recorder receives a copy guard signal, the
recorder continues to record but only a
blank or grey picture will be recorded.
ꢂIf you want to record the following TV
programme, press (RECORD) again.
ꢀ
If the TV programme data is not available
RecordingTV programmes
in the GUIDE Plus+ system, pressing
ꢀ
(RECORD) again will set the recording
time in 30-minute increments, up to a
maximum of 6 (six) hours.
Follow the instructions below to record
the TV programmes onto the HDD,
where you can store for future viewing
and copy to a recordable DVD disc if
required.
C To stop the recording before the
scheduled ending, press (STOP).
ꢁ
Record a specific section of TV
programmes
A Press INFO mon the remote control
to display the Time Shift video bar.
B Use ꢂꢃkeys to select a TV programme
that can be found in the temporary HDD
storage.
C Use ꢁꢀkeys to search for the beginning
of the scene where you want to start
recording, then press
(PAUSE).
Å
D Press the Red button on the remote
control to start recording from here.
Record the currentTV programme
E Press ꢀ(PLAY) to continue playback.
A Press INFO mon the remote control
F Press NEXTÉto search for the point
to display the Time Shift video bar.
where you want to end the recording
and press (STOP) on the remote
control.
ꢂA red marking will be visible on the
video bar to indicate the marked
recording.
ꢁ
B Press (RECORD) on the remote
ꢀ
control.
ꢂThe current TV channel will be
recorded, up to maximum of 6 (six)
hours.
21:00
23:13
[Start Rec] "Record from here" [Record] "Record Program"
Cancel rec. BACK MORE INFO
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
39
dvdr9000h_eu_eng2.indd 39
2005-10-13 9:18:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk (continued)
Playback from DVD
Simultaneous record and play
function
Press OPEN CLOSE on the recorder’s
front panel and load in a disc to start
playback.
ꢀ
ꢀ
ꢀ
While recording the TV programme to
the HDD is in progress, you can play a
previously recorded title from the HDD,
or play a DVD video disc, or watch the
playback from other connected devices.
Playback from other device
This is only possible if this recorder is
connected to the TV using the EXT1 TO
TV-I/O socket.
Press TV/HDD to view the picture from
the device which is connected to the
EXT2 AUX-I/O socket of this recorder.
Watching otherTV programmes
If there is no device connected to the
EXT2 AUX-I/O socket, pressing
TV/HDD will switch to the TV mode.
Use the TV’s channel up/down button to
select a different TV channel.
Helpful Hint:
– Remember to turn the TV back to its video
input channel if you want to watch the TV
channel through the recorder or play back
the recorded disc.
Playback from HDD
A Press HDD-BROWSER, then press
NEXTÉrepeatedly until the title menu
appears.
HDD
SORTING
Recoding Date
SOURCE
Hard Disk
Alphabetical
Delete Order
Protected
Genre
Disc Tray
Disc Library
Last Played
[BROWSER]
B Use ꢂꢃkeys to select a title in the
HDD content menu and press ꢀ(PLAY)
to start playback.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
40
dvdr9000h_eu_eng2.indd 40
2005-10-13 9:18:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk (continued)
Direct recording fromTV
Automatic recording from
Satellite Receiver
If you have connected this recorder to
your TV using a scart cable, you can
immediately start recording the
programme (analogue TV channels only),
which is currently being shown on the TV
while the recorder is in standby mode.
The feature is only applicable for the
Satellite Receiver (or any similar devices)
that is connected to the EXT2 AUX-I/O
scart socket of this recorder. In addition,
the Satellite Receiver must have a timer
function that is able to control the
A Ensure that the { Direct rec. } mode in
the recording setting is turned on (see
page 38).
recording function of this recorder.
A Ensure that the { Sat record } mode in
the recording setting is set to { EXT2 }
(see page 38).
B While watching the TV programme, press
(RECORD) on the remote control to
start recording.
ꢀ
B Use the Satellite Receiver’s timer
programming function to programme the
recording (refer to the Satellite
Receiver’s user manual).
C To stop recording, press (STOP).
ꢁ
ꢂOtherwise, it will stop automatically
after 6 (six) hours of recording.
C Leave the recorder and Satellite Receiver
in standby mode for the recording.
ꢂYou have to turn off the Satellite
Receiver to standby mode before the
recorder.
Helpful Hint:
– Direct recording is not possible from the
device connected to the EXT2 AUX I/O scart
socket.
ꢂThe recorder will start recording
when it detects a signal from the Satellite
Receiver.
Helpful Hint:
– The recorder’s timer recordings take
priority over automatic satellite recording.
Automatic Satellite recording will stop if the
recorder’s timer recording is due to start.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
41
dvdr9000h_eu_eng2.indd 41
2005-10-13 9:18:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk (continued)
About timer recording
Timer recording (GUIDE
Plus+ system)
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder will tune to the right
programme channel and begin recording
at the specified time.
To schedule a recording with the GUIDE
Plus+ system, simply select the desired
programme from the channel list.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
With this recorder, you can schedule up
to 25 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
B Turn on the recorder and press GUIDE
on the remote control.
ꢂThe GUIDE Plus+ screen appears.
There are three ways to
programme a timer recording
– Using the GUIDE Plus+ system
– Using the ShowView / VIDEO Plus+
system
A
B
– Manual timer recording
Note: If the GUIDE Plus+ setup menu
appears, it means that this recorder has
not been installed with the GUIDE Plus+
programme data yet. See pages 28~29 to
set-up the GUIDE Plus+ system.
C Use ꢂꢃkeys to select a desired TV
channel and use ꢁꢀkeys to select a
programme.
C
Press CH +/-to scroll down/up a
page at a time.
ꢀ
Press
to go directly to a day
ꢀ
About ‘VPS/PDC’
before or the next day TV listings.
‘VPS’ (Video Programming System) or
‘PDC’ (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV
programme starts earlier or ends later
than was scheduled, this recorder will
then turn on and off at the correct time.
D Press the Red button on the remote
control for
.
E Press GUIDE to exit the menu.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
42
dvdr9000h_eu_eng2.indd 42
2005-10-13 9:18:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk (continued)
D Use the alphanumeric keypad 0-9 to
Timer recording (ShowView /
VIDEO Plus+ system)
enter the ShowView / VIDEO Plus+
programming number and press OK to
confirm. (e.g. 5-312-4 or 5,312 4, key in
‘53124’).
ꢂThe GUIDE Plus+ system is decrypting
the programming number and
This is a simple timer programming
system. To use it, enter the ShowView
programming number / VIDEO Plus+
PlusCode® programming number
associated with your television
transforming it into a scheduled event.
programme. You can find this number in
your TV listings magazine.
All the information needed by this
recorder for programming is contained in
the programming number.
If an incorrect programming number is
entered, you have to select the correct
programme number manually. Follow the
instructions on the TV to edit the date
and time.
ꢀ
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
B Turn on the recorder and press TIMER
on the remote control.
E The default recording settings are
displayed in the pink tile. To make
changes, press the matching colour coded
button on the remote control.
ꢂThe GUIDE Plus+ schedule screen
appears.
{ Frequency }
Press the Red button on the remote control
repeatedly to select the repeat recording
setting (Once, Weekly, M-F [Monday to
Friday]).
{ Timing }
Press the Green button on the remote
control repeatedly to select adding extra time
(+0, +10, +20, +30) to the end of recording or
select VPS/PDC (V-P) function.
Note: VPS/PDC is not available for external
receiver.
C Press the Red button on the remote
control for
or
.
ꢂThe ShowView / VIDEO Plus+ entry
screen appears.
F Press TIMER to confirm and exit the menu.
ꢂThe ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
ꢂIf the recorder is not in standby mode,
a notification message will appear before
the timer recording begins.
=
=
=
=
=
=
=
=
Note: In the UK and Ireland the ShowView
system is called VIDEO Plus+ system and
ShowView Programming Number is called
ꢂIf you ignore the message, the
recorder will automatically switch to the
respective channel and start recording.
PlusCode Programming Number.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
43
dvdr9000h_eu_eng2.indd 43
2005-10-13 9:18:11 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk (continued)
F Press the Green button to confirm and
Timer recording (manually)
go to the next parameter.
ꢂA virtual keyboard appears on the TV
for entering the title name.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
G Once complete, store the setting by
pressing the Green button for
ꢂThe scheduled manual recording will
be displayed.
.
B Turn on the recorder and press TIMER
on the remote control.
ꢂThe GUIDE Plus+ schedule screen
appears.
H The default recording settings are
displayed in the pink tile. To make
changes, press the matching colour coded
button on the remote control.
{ Frequency }
Press the Red button on the remote control
repeatedly to select the repeat recording
setting (Once, Weekly, M-F [Monday to
Friday]).
C Press the Green button on the remote
{ Timing }
control for
.
Press the Green button on the remote
control repeatedly to select adding extra time
(+0, +10, +20, +30) to the end of recording or
select VPS/PDC (V-P) function.
Note: VPS/PDC is not available for external
receiver.
ꢂThe recording date appears.
20
-
May
D Use ꢁꢀꢂꢃkeys or alphanumeric
keypad 0-9 to enter the recording
information (date, start time, end time)
and press the Green button to confirm
each entry and go to the next parameter.
I Press TIMER to confirm and exit the
menu.
E When ‘TUNER 01’ appears on the
display, select the input source and enter
the programme channel.
ꢂThe ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
ꢂIf the recorder is not in standby mode,
a notification message will appear before
the timer recording begins.
ꢂIf you ignore the warning, the
recorder will automatically switch to the
respective channel and start recording.
ꢂTo select an external input channel,
highlight ‘TUNER” in the menu and use
ꢂꢃkeys to select { Digital Tuner },
{ EXT1 }, { EXT2 } or { CAM1 }.
ꢂTo select a programme number,
highlight ‘01’ in the menu and use the
alphanumeric keypad 0-9 to enter the
programme channel.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
44
dvdr9000h_eu_eng2.indd 44
2005-10-13 9:18:11 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk (continued)
To delete the timer programme
Press the Red button on the remote
Changing/Deleting a timer
recording
ꢀ
control for
.
To edit the timer programme
Press the Green button on the remote
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
ꢀ
control for
, and follow the
instructions on the TV to make the
necessary changes/entry.
B Turn on the recorder and press TIMER
on the remote control.
To edit the Frequency/Timing
Highlight the respective tile in the menu
and press the Red button to change the
frequency or the Green button to change
the timing.
ꢂThe GUIDE Plus+ schedule screen
appears.
ꢀ
D Once complete, press TIMER to
confirm and exit the menu.
C Press ꢃto select a timer programme
which you want to delete/edit.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
45
dvdr9000h_eu_eng2.indd 45
2005-10-13 9:18:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk or recordable DVD
A Connect your Digital Video or Digital 8
Recording from a DV
Camcorder
camcorder to the DV IN socket of this
recorder (see page 24).
B Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
When you connect a DV camcorder to
the DV IN socket of this recorder, you
can control both the camcorder and this
recorder using the recorder’s remote
control. Furthermore, the smart
chaptering feature ensures the chapter
markers are created at each break in the
images.
C Press CAM on the remote control.
ꢂA warning message appears.
Switching to camera mode will clear the
Time Shift Buffer.
Select a media type to record.
Hard Disk
Before you start...
Recordable DVD
Cancel
– Mark the contents in the temporary
HDD storage (time shift buffer) for which
you wish to record to the HDD, see page
36. Otherwise, all the contents will be
cleared when you start camcorder
recording.
– Set the date and time at { DV
Specials } if required for DV update
recording function, see page 76.
D To continue, select to record to { Hard
Disk } or { Recordable DVD } in the
menu and press OK to confirm.
ꢂAll the contents in the temporary
HDD storage will be cleared, only the
‘marked’ contents will be stored onto
the HDD.
Otherwise, select { Cancel } in the
menu and press OK to abort the
operation.
ꢀ
E Turn on the DV camcorder and start
playback.
CAM 2
STOP
DV CONTROL
AUTOREC
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
46
dvdr9000h_eu_eng2.indd 46
2005-10-13 9:18:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk or recordable DVD (continued)
F Press the Blue button on the remote
H You can pause, play, stop, fast forward or
rewind the scene using the ꢁꢀꢂꢃ
keys on the recorder’s remote control to
select the respective control buttons on
the screen.
control for { AUTO REC }.
Auto Record of DV input to hard disk
Record only new DV updates
I To stop the recording, press (STOP).
ꢁ
Record entire DV tape
Cancel
ꢂBoth the recorder and camcorder will
stop.
J To exit, press TUNER.
Note: The { AUTO REC } option can only
be activated while in camcorder play or pause
mode.
Helpful Hints:
– Some camcorders cannot be controlled
using this recorder’s remote control.
– Mixing of PAL and NTSC video format
recording on a same recordable DVD is not
possible.
– If a part of the tape is blank, the recorder
will pause recording. Recording will restart
automatically when there is a recordable
signal. However, if there is more than 5 (five)
minutes of blank tape, the recording will end
automatically.
– A chapter marker is inserted every time
when there is a break in the time code on
the DV tape. This happens when the
recording is stopped or paused then
restarted.
To copy the entire DV tape
Select { Record entire DV tape } in
the menu and press OK to confirm.
ꢂThe camcorder will rewind the tape
and start recording from the beginning.
ꢀ
ꢀ
To copy the newly recorded
contents from the DV tape
Select { Record only new DV updates }
in the menu and press OK to confirm.
ꢂThe recordings which are later than the
date and time set in the { DV Specials }
(see page 76) will be recorded onto the
HDD or recordable DVD.
G To use the recorder’s remote control to
control the camcorder operation during
recording, press the Green button on the
remote control for { DV CONTROL }.
ꢂThe DV control buttons display on the
screen.
CAM 2
+RW
DV CONTROL
AUTOREC
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
47
dvdr9000h_eu_eng2.indd 47
2005-10-13 9:18:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk or recordable DVD (continued)
E To continue, select to record to { Hard
Recording from camcorder
Disk } or { Recordable DVD } in the
menu and press OK to confirm.
When you connect the camcorder to the
ꢂAll the contents in the temporary
VIDEO or S-VIDEO socket at the front
HDD storage will be cleared except for
panel of this recorder or the EXT1 or
the ‘marked’ recordings.
EXT2 socket at the back panel, follow the
steps below to make the camcorder
recording.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
ꢀ
F Press CH +/-repeatedly to select the
correct input channel that matches the
connected socket of the device.
ꢂ{ CAM 1 } : S-VIDEO or VIDEO
socket at the front.
Before you start...
Mark the contents in the temporary
HDD storage (time shift buffer) for which
you wish to record to the HDD, see page
36. Otherwise, all the contents will be
cleared when you start camcorder
recording.
ꢂ{ EXT 1 } : EXT1 TO TV-I/O scart
socket at the back.
ꢂ{ EXT 2 } : EXT2 AUX-I/O scart
socket at the back.
G Press (RECORD) to start recording
ꢀ
and press PLAY button on the camcorder
to start playback.
To pause the recording, press
To continue recording, press
again.
(PAUSE).
(PAUSE)
ꢀ
Å
Å
ꢂA new chapter marker is created after
recording restarts (for recordable DVD
only).
H To stop the recording, press (STOP).
ꢁ
ꢂA new title will be created when you
begin another recording.
I To exit, press TUNER.
A Connect the camcorder to this recorder
(see page 24).
B Find the place on the camcorder that you
want to start recording from and set the
camcorder to pause mode.
C Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
D Turn on the recorder and press CAM
on the remote control.
ꢂA warning message appears.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
48
dvdr9000h_eu_eng2.indd 48
2005-10-13 9:18:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Record to Hard Disk or recordable DVD (continued)
D To continue, select to record to { Hard
Recording from an external
device (VCR/DVD player)
Disk } or { Recordable DVD } in the
menu and press OK to confirm.
ꢂAll the contents in the temporary
HDD storage will be cleared except for
the ‘marked’ recordings.
You can record from an external device
which is connected to this recorder’s
input socket. Copy-protected
material cannot be recorded on this
recorder.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
ꢀ
E Press CH +/-repeatedly to select the
correct input channel that matches the
connected socket of the device.
ꢂ{ CAM 1 } : S-VIDEO or VIDEO
socket at the front.
IMPORTANT!
It is not possible to record the disc
playback from this recorder to its
HDD.
ꢂ{ EXT 1 } : EXT1 TO TV-I/O scart
socket at the back.
ꢂ{ EXT 2 } : EXT2 AUX-I/O scart
socket at the back.
F Start playback on the connected device.
G Press (RECORD) to start recording.
ꢀ
To pause the recording, press
To continue recording, press
again.
(PAUSE).
(PAUSE)
ꢀ
Å
Å
ꢂYou can use this function to avoid
unwanted recording.
ꢂA new chapter marker is created after
recording restarts.
H To stop the recording, press (STOP).
ꢁ
A Connect the external device to this
recorder (see page 22).
I To exit, press TUNER.
B Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
Helpful Hint:
– If ‘X’ appears at the bottom of the TV
screen, it means that there is no video signal
received from the current input channel.
C Turn on the recorder and press CAM
on the remote control.
ꢂA warning message appears.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
49
dvdr9000h_eu_eng2.indd 49
2005-10-13 9:18:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy from Hard Disk to recordable DVD
IMPORTANT!
Discs for recording
– It is not possible to record the TV
programmes or the scheduled timer
programmes directly to a
recordable DVD. You can only
record it to the HDD and then copy
to a recordable DVD.
Three different types of DVD recordable
discs can be used with this recorder:
– Copy protected (Copy-Once or
Copy-Never) movies and DVD Videos
cannot be copied to the HDD.
DVD RW (DVD Rewritable)
– Discs that are re-writable can be used
for multiple recordings once existing data
is erased.
About copying
You can copy a recorded title from the
HDD (hard disk drive) to a recordable
DVD.
DVD R (DVD Recordable)
– Discs can only be used for a single
recording. Each new recording is always
added at the end of all previous
recordings as existing recordings cannot
be overwritten.
The time required for copying from HDD
to a recordable DVD depends on the
recording mode of the HDD recordings.
It is not possible to change the recording
mode for the copying process. It is
– Editing can be done on DVD R discs
as long as they have not been finalised.
– You can also delete unwanted
recordings. However, the disc space
occupied by the deleted recordings
cannot be recovered for further
recording.
– To play a DVD R disc on other DVD
players, it must be finalised (see page 72).
After this is done, no more data can be
added to the disc.
therefore important that you choose the
appropriate recording mode when you
set up the recording to the HDD.
The copying process is done at a higher
speed than the recording. The maximum
copying speed is up to 2x. You cannot
shorten the time required for recoding
even with high-speed discs.
HDD ꢄRecordable DVD
HDD
recording
mode
Hours of recordings can Time required
be stored in an empty
for copying 1 hour
4.7GB recordable DVD of recording
HQ
SP
SPP
LP
1
2
2.5
3
25 mins
12.5 mins
10 mins
8 mins
DVD+R DL (DVD+R Double Layer)
– It contains the same usage as DVD+R,
the only difference is the capacity- 8.5GB.
It offers two recordable layers on a single
DVD disc. The layers are accessible from
the same side of the disc, so recording
can occur completely uninterrupted.
EP
SLP
SEP
4
6
8
6 mins
4 mins
3 mins
The following information will be stored
on the disc :
– Recording mode
– Title/name of recording
– Date and time of recording
– Index picture of title
TIPS: Ensure that there is sufficient space available on the recordable DVD before recording.
You have to finalise the DVD R before it can be played on other players, see page 72.
50
dvdr9000h_eu_eng2.indd 50
2005-10-13 9:18:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy from Hard Disk to recordable DVD (continued)
E Use ꢂꢃkeys to select a title to copy.
Copying to a recordable DVD
F Press the Green button on the remote
control for { COPY }.
ꢂThe making disc copy information
appears.
You can copy any recordings from the
HDD to a recordable DVD. The storage
capacity of the disc depends on the
recording mode that was selected for the
+R
recordings in the HDD, see page 38.
Making Disc copy
Title
Length
CH8 10/05-JAN-101
52 min
Before you start...
Available space
Archiving Time
183 min
13 min
Be sure that no other recording is to be
carried out while copying (e.g. timer
recording).
START
CANCEL
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
If you are using a DVD RW for
recording, you can press
ꢀ
/
to
select the space in the disc where you
want the recording to be placed (e.g. the
space of a deleted title).
B Insert a recordable DVD into the
recorder.
C Press HDD-BROWSER on the remote
control.
G To start recording, press the Green
button again for { START }.
ꢂThe content menu appears.
ꢂ“HDD TO DVD” appears on the
display panel during copying process.
ꢂWhile copying the recordings from
HDD, any interruption to the process
(e.g. power failure) may lead to a bad
disc.
HDD
SORTING
Recoding Date
SOURCE
Hard Disk
Alphabetical
Delete Order
Protected
Genre
Disc Tray
Disc Library
Last Played
Otherwise, press the Yellow button for
{ CANCEL } to abort the operation.
ꢂPress INFO will call out the coloured
options at the bottom of the screen.
ꢀ
[BROWSER]
D Press NEXTÉrepeatedly until the
{ TITLES } and { INFO } menus appear.
Helpful Hints:
HDD
– In some cases, you may not be able to add
new recording to a recordable DVD that
contains recordings from other DVD
recorders.
TITLES
2/2
INFO
1-1
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
– If the newly recorded title in the HDD is
not accessible, turn the recorder off and on
again to recover the recording.
DELETE
COPY
CHILD LOCK
PROTECT
To edit your recordings on the
recordable DVD, see pages 70~74.
TIPS: Ensure that there is sufficient space available on the recordable DVD before recording.
You have to finalise the DVD R before it can be played on other players, see page 72.
51
dvdr9000h_eu_eng2.indd 51
2005-10-13 9:18:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Disc Library
The Disc Library is an integrated database
in this recorder. It gives you a quick and
easy access to the recordings you have
made onto the recordable DVDs.
Finding a recorded title
To do this, the recorded disc data must
have been stored in the Disc Library. The
appropriate disc does not have to be in
the recorder.
The Disc Library keeps the information
on which video is recorded on which
disc, length of recording and remaining
disc space.
A Press HDD-BROWSER on the remote
control.
B Press ꢃto select { Disc Library }, then
press NEXTÉto select { SORTING }
menu.
Storing the recorded DVD
data in the Disc Library
C Use ꢂꢃkeys to select one of the
sorting options.
This recorder will assign the disc a
number, and keep track of what you have
recorded and update the data
automatically whenever you add in new
recording to the disc.
ꢂ{ Alphabetical } - Lists all the titles
by alphabetical order.
ꢂ{ Numerical } - Lists all the discs by
numerical order.
A Press HDD-BROWSER on the remote
D Press NEXTÉrepeatedly until the
{ DISCS } or { TITLES } and { INFO }
menus appears.
control.
B Load in a recordable DVD.
ꢂIf { TO LIBRARY } appears, it means
this disc has not be added to the Disc
Library.
+R
DISCS
TITLES
001
002
003
My Holiday
My Pictures
Celebrations
+R
SOURCE
Hard Disk
CONTENT
Video
Audio
Photo
Disc Tray
[BROWSER]
Disc Library
GET TITLE
REMOVE DVD
E Highlight the title you want and press the
Blue button on the remote control for
{ GET TITLE }.
[BROWSER]
TO LIBRARY
ꢂA message showing the disc number
appears.
C Press the Blue button on the remote
control for { TO LIBRARY }.
F Load the appropriate disc and start
ꢂThe assigned disc number appears and
the disc tray opens automatically
playback.
If the disc library becomes full, you will
have to delete some of the discs data in
order to use the memory for new discs.
Select a disc number from the { DISCS }
menu, then press the Red button for
{ REMOVE DVD }.
ꢀ
D Write the same disc number on the disc
and disc’s cover for easy locating of the
appropriate disc next time, then press
OK to exit.
TIPS: Up to 999 discs (or 9000 titles ) can be stored in the disc library.
Maximum titles per disc is 999.
52
dvdr9000h_eu_eng2.indd 52
2005-10-13 9:18:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Hard Disk
Basic operation
Each recording stored on the HDD is
displayed in the HDD browser with an
index picture.
A Press HDD-BROWSER on the remote
control.
ꢂThe content menu appears.
B Press NEXTÉrepeatedly until the
{ TITLES } and { INFO } menus appear.
HDD
TITLES
2/2
INFO
1-1
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
/
– move to the beginning or previous/
next chapter.
– hold down this button for fast
backward/forward search. Press the
button again to increase the search speed
(x4, x8, x32).
DELETE
COPY
CHILD LOCK
PROTECT
– while in pause mode, start slow
motion playback.
C Use ꢂꢃkeys to select a title and press
ꢀ(PLAY) to start playback.
D During playback, you can use the
following buttons on the remote control
to access additional playback features.
ꢁREPLAY / NEXT ꢀ
– jump backward/forward by a fixed
time period, see page 79.
(PAUSE)
Å
– view a still picture.
(STOP)
– stop playback.
ꢁ
TIPS: Press HDD-BROWSER to exit the menu.
53
dvdr9000h_eu_eng2.indd 53
2005-10-13 9:18:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Hard Disk (continued)
Sorting the titles display
order
Delete/Protect a title in the
HDD
You may organise the titles in a specific
order according to certain criteria for
easy locating the recordings. This order
will remain until you exit the content
menu.
A number of editing options are displayed
at the bottom of the HDD content menu.
They can be accessed via the matching
colour coded buttons on the remote
control.
A Press HDD-BROWSER on the remote
control.
A Press HDD-BROWSER on the remote
control.
ꢂThe content menu appears.
ꢂThe content menu appears.
B Press NEXTÉto select the
HDD
TITLES
2/2
INFO
1-1
{ SORTING } menu.
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
HDD
SORTING
Recoding Date
TITLES
1/2
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
Alphabetical
Delete Order
Protected
Genre
DELETE
COPY
CHILD LOCK
PROTECT
Last Played
B Use ꢂꢃkeys to select a title.
C Press the matching colour coded button
on the remote control to access the
options displayed at the bottom of the
menu.
C Use ꢂꢃkeys to select one of the
following sorting options.
{ Recording Date }
Lists the titles by the date recorded.
{ DELETE }
Red button – Delete the selected title from
the hard disk.
{ Alphabetical }
Lists the titles by alphabetical order.
{ COPY }
{ Delete Order }
Green button – Copy the selected title from
the hard disk to a recordable DVD.
Lists the titles by deletion order when the
HDD has no or less space for new recordings.
Deletion of title has to be done manually.
{ CHILDLOCK } / { CHLD UNLCK }
Yellow button – Lock or unlock the selected
title from viewing. A four-digit pin code is
required to play the locked disc/title or to
unlock the disc/title (see page 77).
{ Protected }
Lists the titles by protected against deletion.
{ Genre }
Lists the titles by the genre you have specified.
{ PROTECT } / { UNPROTECT }
Blue button – Protect or unprotect the title
against editing or accidental loss of recordings.
{ Last Played }
Lists the titles by the sequence of titles last
played.
TIPS: Press HDD BROWSER to exit the menu.
54
dvdr9000h_eu_eng2.indd 54
2005-10-13 9:18:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Disc
IMPORTANT!
– If the inhibit icon ‘X’ or
Playable discs
appears on the TV screen when a
button is pressed, it means the
function is not available on the
current disc or at the current time.
– DVD discs and players are
designed with regional restrictions.
Before playing a disc, make sure the
disc is for the same region zone as
your player.
Using this recorder, you can play and
record on the following discs:
Recording and Playback
DVD RW (DVD Rewritable);
can be recorded on over and
over and can only be played back
when the recording was made in
‘video mode’.
DVD R (DVD Recordable);
once the disc is full or finalised,
you cannot record any more on
the disc. It can only be played
back when the recording was
made in ‘video mode’ and finalised.
Starting disc playback
A Press STANDBY-ON 2to turn on
the recorder.
B Press OPEN CLOSE on the front of
DVD+R DL (DVD+R Double
Layer); same as DVD R.
the recorder.
You can also hold down the (STOP)
ꢀ
ꢁ
button on the remote control to open
and close the disc tray.
Playback only:
DVD Video (Digital Versatile
Disc)
C Carefully place the disc into the tray with
the label facing up, then press
OPEN CLOSE.
ꢂFor double-sided discs, load the side
which you want to play facing up.
Audio CD (Compact Disc
Digital Audio)
Video CD
(Formats 1.0, 1.1, 2.0)
D Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
Super Video CD
E Playback may start automatically.
If not, press HDD-BROWSER to show
the content menu. Highlight { Disc Tray }
in the menu and press NEXTÉ.
Navigate in the menu to select a track/title
and press ꢀ(PLAY).
CD-R (CD-Recordable)
Audio/Video format or
MP3/JPEG files.
A
Recordable
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/JPEG files.
A
If the pin code entry dialogue appears on
the TV, this means that the child lock/
parental control was activated for the
inserted disc. You have to enter your
four-digit pin code (see page 77).
ꢀ
ReWritable
For more playback features, see pages
59~64.
ꢀ
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
55
dvdr9000h_eu_eng2.indd 55
2005-10-13 9:18:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Disc (continued)
Playing a DVD video disc
Playing a DVD recordable disc
Normally the DVD disc contains a disc
A Insert a DVD recordable disc.
menu. You may have to make your
selection (e.g., subtitle or audio language)
within the disc menu.
ꢂThe Index Picture screen appears.
TITLES
Static lights
The Pianist
2-2
00:22:08
SPP
14:01:03
01:20:00
SPP
The island of lost dream
A Insert a DVD.
21:02:03
Lord of the Rings, The T
00:32:02
SPP
If the disc menu appears, use the
ꢀ
Habla Con Ella
The Ring
...
28:06:03
alphanumeric keypad 0-9 to input
your selection or use ꢂꢃkeys to select
a play option and press OK to confirm.
B Use ꢂꢃkeys to select a title to play,
then press ꢀ(PLAY).
To access the content menu
Press HDD-BROWSER on the remote
control, highlight { Disc Tray } in the
menu and press NEXTÉ.
ꢀ
ꢀ
C To stop playback, press (STOP).
ꢁ
Helpful Hint:
– If the message ‘EMPTY DISC’ appears on
the display panel, this means that there are
no recordings on this disc.
To select the previous or next
chapter/title
During playback, press T/C on the
remote control to select ‘TITLE’ or
‘CHAPTER’, then press
/
.
B To stop playback, press (STOP).
ꢁ
Playing a (Super)Video CDs
(Super) Video CDs may feature ‘PBC’
(Play Back Control). This allows you to
play the video CDs interactively,
following the menu on the display.
A Insert a (Super) Video CD.
If the disc index menu appears, use the
alphanumeric keypad 0-9 to input
your selection or use ꢂꢃkeys to select
a play option and press OK to confirm.
ꢀ
To return to the previous menu, press
BACK on the remote control.
ꢀ
B To stop playback, press (STOP).
ꢁ
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
56
dvdr9000h_eu_eng2.indd 56
2005-10-13 9:18:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Disc (continued)
Playing a JPEG image file (slide
show)
Playing an MP3 CD
MP3 (MPEG1 Audio Layer-3) files are
highly compressed music files. The MP3
format lets you store about ten times
more data (music, pictures) on a single
CD-ROM than a regular CD.
You can display JPEG pictures in the
selected roll automatically one after the
other at adjustable intervals.
A Insert a JPEG photo CD (CD, DVD RW,
DVD R).
A Insert an MP3 CD.
ꢂThe content menu appears.
ꢂThe content menu appears.
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu.
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu.
ꢀ
ꢀ
B Press NEXTÉrepeatedly until the
{ PHOTO ROLLS } and { INFO }
menus appear.
B Press NEXTÉrepeatedly until the
{ ALBUMS } and { TRACKS } menus
appear.
CD/PHOTO/ROLLS
HDD
PHOTO ROLLS
Root
1/1
INFO
TITLES
2/2
INFO
1-1
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
01.01.2005
50 Photos
TO ALBUM
DELETE
COPY
CHILD LOCK
PROTECT
C Press ꢀ(PLAY) to start the slide show
playback or press OK to show the
thumbnail pictures overview.
C Use ꢁꢀꢂꢃkeys to select the album
and track to play, then press ꢀ(PLAY).
D During playback, you can press
/
You can edit the displayed photo by
pressing EDIT on the remote control to
access to { Filter } and { Colour Adjust }
settings, or press the matching colour
coded button on the remote control to
zoom, flip or rotate the photo.
ꢀ
to select the next/previous track.
E To stop playback, press (STOP).
ꢁ
Helpful Hints:
– If both JPEG pictures and MP3s are in the
same disc, you can choose to playback the
JPEG pictures or MP3s by selecting { Photo }
or { Audio } in the menu.
EDIT PHOTO
Options
Toolbar
– Only the first session of a multi-session CD
will be played back.
Filter
Color Adjust
– Further information on the album, track
and artist will also be displayed on the TV if
this is included in the ID tag.
– This recorder does not support MP3PRO
audio format.
ZOOM
RESET
FLIP
ROTATE
However, the changes cannot be stored
on the HDD or a recordable DVD.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
57
dvdr9000h_eu_eng2.indd 57
2005-10-13 9:18:16 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Disc (continued)
Helpful Hints:
During playback, the available playback
settings are displayed at the bottom of
the screen.
ꢀ
– If both JPEG pictures and MP3s are in the
same disc, you can choose to playback the
JPEG pictures or MP3s by selecting { Photo }
or { Audio } in the menu.
Photo
– For a non standard disc, if the JPEG
picture is not recorded with an ‘exif’ type file,
the actual thumbnail picture will not be
shown on the display. It will be replaced
with a ‘blue mountain’ thumbnail picture.
– Some types of JPEG file cannot be played
on this recorder.
00:01:02
00:00
[EDIT] = Exit
ZOOM
REPEAT
SPEED DOWN SPEED UP
– It may require longer time for the recorder
to display the disc content on the TV due to
the large number of songs/pictures compiled
into one disc.
– Disc with no name will be displayed as
‘Unknown Data’.
{ ZOOM }
Red button – Select this to activate zoom
mode. The slideshow playback will pause.
– { ZOOM IN } Blue button: enlarge the
picture.
– { ZOOM OUT } Yellow button: revert to
the actual size.
– { END } Red button: exit zoom mode and
continue slideshow playback.
Supported JPEG picture formats
File format:
– The file extension has to be ‘*.JPG’ and
not ‘*.JPEG’.
– It can only display DCF-standard still
pictures or JPEG pictures e.g. TIFF. It
cannot play back moving pictures, Motion
JPEG, progressive JPEG and other
formats, or pictures in formats other
than JPEG, or pictures associated with
sound e.g. AVI-files.
{ REPEAT }
Green button – Select this to toggle between
repeat on and off.
{ SPEED DOWN } / { SPEED UP }
Yellow and Blue buttons – Select this to
change the slideshow playback speed.
– { SLOW }: 10 (ten) seconds interval
– { MEDIUM }: 5 (five) seconds interval
– { FAST }: 3 (three) seconds interval
D To stop playback, press (STOP).
ꢁ
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
58
dvdr9000h_eu_eng2.indd 58
2005-10-13 9:18:16 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Playback Features
Adding photos to an album
Creating a slideshow playlist
(album)
A Insert a JPEG photo CD (CD, DVD RW,
DVD R).
ꢂThe content menu appears.
You can customise the JPEG picture
slideshow playback within a disc by
storing your selection in an album.
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu.
ꢀ
This recorder can handle up to a
maximum of 100 JPEG pictures in one
album on a recordable disc, depending on
the JPEG file parameters.
B Press ꢀrepeatedly until the { PHOTO
ROLLS } and { INFO } menus appear.
C Select a photo roll folder and press OK
to show the thumbnail pictures overview.
A Collect your favourite photos from the
‘PHOTO ROLLS’ and add to an album
for creating a new slideshow playlist.
ꢂSee “Adding photos to an album”.
Overview Root
B If necessary, edit the photos in the album.
ꢂSee “Edit the album”.
50
8
TO ALBUM
C Select the photo album in the menu and
press ꢀ(PLAY) to start the slideshow
playback.
SELECT ALL
SELECT
ROTATE
D Use ꢁꢀꢂꢃkeys to select the photo
which you wish to add to the album and
press the Yellow button on the remote
control for { SELECT }.
About Photo Roll/Photo Album
Photo roll is a folder for storing original
JPEG pictures and they are protected. It
is comparable with a conventional 35mm
film for cameras. Rolls will be created
automatically from the digital cameras.
To select all the photos, press the
Green button for { SELECT ALL }.
ꢀ
To rotate the selected photo in 90
degree clockwise increments, press the
Blue button for { ROTATE }.
ꢀ
Photo album contains different JPEG
pictures created from the rolls. You can
delete an album without deleting the
pictures of the rolls.
E Press the Red button on the remote
control for { TO ALBUM }.
ꢂThe ‘Add to Photo Albums’ menu
appears.
DVD
CONTENT
Video
SORTING
PHOTO ROLLS
PHOTO ALBUMS
F Create a new album or select an existing
album, then press OK to add the
photo(s) to it.
Audio
Photo
ꢂThe selected photos are now stored
in the album.
[BROWSER]
TIPS: Press BACK to go back to previous menu item.
59
dvdr9000h_eu_eng2.indd 59
2005-10-13 9:18:16 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Playback Features (continued)
To delete the album
Edit the album
Select the album and press the Red
button on the remote control for
{ DELETE }.
ꢀ
You can re-arrange the picture position
in the album in order to create the
desired slideshow playback order, or
remove the photo(s) from the album.
The order and number of the pictures in
the ‘PHOTO ROLLS’ remains unchanged.
D Press OK to show the thumbnail pictures
overview.
Overview Alb0001
A Insert a JPEG photo CD (CD, DVD RW,
DVD R).
ꢂThe content menu appears.
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu.
ꢀ
50
8
REMOVE
MOVE
SELECT
ROTATE
B Press ꢀto select the { SORTING }
menu and press ꢃto select ‘PHOTO
ALBUMS’.
E Use ꢁꢀꢂꢃkeys to select the photo
which you wish to move and press the
Yellow button on the remote control
for { SELECT }.
DVD
SORTING
PHOTO ROLLS
PHOTO ALBUMS
PHOTO ALBUMS
Alb0001
Alb0002
F Press the Green button on the remote
control for { MOVE }.
Alb0003
Alb0004
ꢂA ‘navigator’ will appear on the menu,
it enables you to select the position
between the photos.
[BROWSER]
G Use ꢁꢀꢂꢃkeys to move the
‘navigator’ around the menu and press
OK to confirm the position where you
want to insert the photo(s).
C Press ꢀagain to access the { PHOTO
ALBUMS } menu and use ꢂꢃkeys to
select an album.
To rotate a photo
To change the album name and date
Select the photo in the menu and press
the Blue button for { ROTATE }.
ꢀ
ꢀ
Select the album and press EDIT on the
remote control. Make the necessary
changes on the respective fields and press
OK and EDIT to exit the menu.
ꢀ
To remove a photo from the album
Select the photo in the menu and press
the Red button on the remote control
for { REMOVE }.
EDIT ALBUM INFO
EDIT
Toolbar
Edit Name
Edit Date
Set album name & date.
TIPS: Press BACK to go back to previous menu item.
60
dvdr9000h_eu_eng2.indd 60
2005-10-13 9:18:16 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Playback Features (continued)
Searching forwards/
backwards
You can fast forward or fast reverse a
disc during playback and select a desired
search speed.
A During playback, hold down
(reverse)
or (forward) until the search speed
status bar (-4X or 4X) appears on the
TV.
ꢂThe sound will be muted.
B Press the
(reverse) or
(forward)
repeatedly to cycle through the different
search speed (-4X, -8X, -32X, 4X, 8X,
32X).
Selecting another title/
chapter/ track
C To resume normal playback, press
ꢀ(PLAY).
When a disc contains more than one
track, title or chapter, you can change to
a different track, title or chapter as
follows.
Pausing playback / slow
motion play
During playback,
A During playback, press
(PAUSE) to
Å
Press
track.
to go to the next title/chapter/
ꢀ
ꢀ
pause playback and display a still picture.
B Hold down (reverse) or (forward)
Press
to return to the start of the
until the slow motion status bar (-1/8X
or 1/8X) appears on the TV.
ꢂThe sound will be muted.
current title/chapter/track. Pressing
twice can return to the start of the
previous title/chapter/track.
C Press the
(reverse) or
(forward)
OR
repeatedly to cycle through the different
slow motion speed (-1/8X, -1/4X, -1/2X,
1/8X, 1/4X, 1/2X).
Use the alphanumeric keypad 0-9 to
input the title/chapter/track number.
ꢀ
ꢀ
OR
D To resume normal playback, press
Press T/C on the remote control to
select “T” (title) or “C” (chapter), then
ꢀ(PLAY).
press
/
to select the title/ chapter
number.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
61
dvdr9000h_eu_eng2.indd 61
2005-10-13 9:18:17 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Playback Features (continued)
Repeat play
Scan disc
The repeat play options vary depending
on the disc type.
(for CD, VCD, DVD R/ RW disc only)
This function allows you to preview the
first 10 seconds of each track on the disc.
A During playback, press the Yellow
button on the remote control to select
one of the repeat options.
A During playback, press the Red button
on the remote control.
ꢂRepeat chapter (DVD, DVD R/ RW
only)
ꢂThe recorder skips to the next track
after 10 seconds of playback.
ꢂRepeat track/title
B To resume normal playback, press the
ꢂRepeat album/playlist (if applicable)
ꢂRepeat entire disc (video CD, audio
CD, DVD R/ RW only)
Red button again.
Helpful Hint:
– The { SCAN } option is only possible if it is
displayed at the bottom of the screen when
you press the SYSTEM on the remote
control.
B To cancel repeat playback, press the
Yellow button repeatedly until the
repeat mode is off or press (STOP).
ꢁ
Repeating a specific segment
(A-B)
Shuffle play
(for CD, MP3 disc only)
You can repeat the playback of a specific
segment within a title/chapter track. To
do this, you must mark the start and end
of the segment you want.
Select shuffle play mode to allow the
recorder to randomly select and play
tracks on the disc.
A During playback, press the Blue button
on the remote control.
A Press the Green button on the remote
control.
ꢂThis indicates that the start point has
been marked.
ꢂIt will start play back of all the
chapters within the title in a random
order.
B Press the Blue button again to mark the
end of the segment.
B To cancel shuffle playback, press the
Green button again.
ꢂA visual marker is placed on the
programme bar.
Helpful Hint:
ꢂPlayback skips to the start of the
marked segment. The segment is
repeated until the repeat mode is
cancelled.
– The { SHUFFLE } option is only possible if
it is displayed at the bottom of the screen
when you press the SYSTEM on the remote
control.
C To cancel repeat playback, press the
Blue button once again.
[PLAY] [EDIT] [OK] = PLAY
SCAN
SHUFFLE
REPEAT
A-B
Repeat play
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
62
dvdr9000h_eu_eng2.indd 62
2005-10-13 9:18:17 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Playback Features (continued)
Changing subtitle language
Using theToolbar options
This operation works only on DVDs with
multiple subtitle languages. You can
change to the language you want while
playing DVD.
This function can also be accessed via the
Green button on the remote control
while in disc playback mode.
A Press ꢃto select { Subtitle } and press
ꢀto enter its options.
B Press ꢃrepeatedly until the language
you want is selected, then press ꢁto
confirm.
ꢂThe languages may be numbered or
abbreviated, such as “En” for English.
A During playback, press SYSTEM on the
remote control.
Changing audio soundtrack
language
ꢂThe system setup menu appears.
B At { Toolbar }, press NEXTÉto
select { Options }.
This operation works only on DVDs with
multiple soundtrack language, or VCDs
with multiple audio channel, or DVD R/
RW recorded with 5.1 multi-channel.
ꢂThe available options might differ
depending on the situation and disc type.
DVD-VIDEO-TITLE 04|CO1
Options
This function can also be accessed via the
Red button on the remote control while
in disc playback mode.
Toolbar
Subtitle
Audio
Angle
Zoom
A Press ꢃto select { Audio } and press
NEXTÉto enter its options.
Time search
[PLAY] [EDIT] [OK] = PLAY
B Press ꢃrepeatedly until the audio
language or soundtrack (Audio 1 or 2)
you want is selected, then press ꢁto
confirm.
SCAN
SHUFFLE
REPEAT
A-B
C Use ꢂꢃkeys to select the setting you
want to adjust.
ꢂThe languages may be numbered or
abbreviated, such as “En” for English.
ꢂ{ Audio 1 } option is for 5.1-channel
output and { Audio 2 } is for output
according to how the soundtrack was
encoded.
ꢂInstructions and explanation of the
options are provided in the following
pages.
ꢂIf the selection in the menu is greyed
out, that means the feature is not
available or cannot be changed in the
current state.
D To exit, press SYSTEM.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
63
dvdr9000h_eu_eng2.indd 63
2005-10-13 9:18:17 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Playback Features (continued)
Switching camera angles
Searching by time
This option is only available with DVDs
that contain sequences recorded from
different camera angles. This allows you
to view the picture from different angles.
This option allows you to skip to a
specific point in the current disc.
A Press ꢃto select { Time search } and
press NEXTÉto enter the time field
(hours : minutes : seconds).
A Press ꢃto select { Angle } and press
NEXTÉto enter its options.
ꢂThe camera angles available for
selection appear.
B Use the alphanumeric keypad 0-9 to
enter the time where playback should
start and press OK to confirm.
ꢂPlayback skips to the time entered.
B Use ꢂꢃkeys to select the camera
angle you want to switch to, then press
ꢁto confirm.
Zooming in
This option allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
A Press ꢃto select { Zoom } and press
NEXTÉto enter zoom in mode.
ꢂThe zoom status bar appears and
displays the zoom factor.
Zoom 2
END
ZOOM OUT
ZOOM IN
B Press the Blue button on the remote
control to zoom in or Yellow button to
zoom out.
C Use ꢁꢀꢂꢃkeys to pan through the
zoomed picture.
D To exit zoom mode, press the Red
button.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
64
dvdr9000h_eu_eng2.indd 64
2005-10-13 9:18:17 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Hard Disk
Changing the title name
Selecting the genre
Some TV channels transmit the name of
the programme. In this case, the
programme name will automatically be
stored when recording to the HDD.
Otherwise, only the programme number
and date/time of the recording will be
stored as title name.
You may select the genre type provided
in the list for easy and fast searching of a
recorded title.
A Press HDD-BROWSER on the remote
control, then press NEXTÉrepeatedly
until the { TITLES } and { INFO }
menus appear.
A Press HDD-BROWSER on the remote
control, then press NEXTÉrepeatedly
until the { TITLES } and { INFO }
menus appear.
B Use ꢂꢃkeys to select a title and press
EDIT on the remote control.
ꢂThe HDD edit menu appears.
HDD
HDD
Title name
TITLES
2/2
INFO
1-1
Genre
Sport
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
Video edit
C Select { Genre } in the menu and press
B Use ꢂꢃkeys to select a title and press
EDIT on the remote control.
NEXTÉ.
D Use ꢂꢃkeys to select a genre type and
ꢂThe HDD edit menu appears.
press OK to confirm.
HDD
Title name
Genre
P01 28.03.05 12:04
Video edit
C Select { Title name } in the menu and
press NEXTÉ.
D Use ꢂꢃkeys to change the character/
number or make an entry by using the
alphanumeric keypad 0-9.
ꢂUse ꢁꢀkeys to move to the
previous or next field.
To switch between upper and lower case
characters, press a/A on the remote
control.
ꢀ
ꢀ
To clear the title name, press the Red
button on the remote control for
{ CLEAR }.
E Press OK to confirm the changes.
TIPS: No editing can be carried out on a protected title, see page 54.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
65
dvdr9000h_eu_eng2.indd 65
2005-10-13 9:18:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Hard Disk (continued)
PAUSE
HDD
Video editing
This recorder allows you to edit the
video content after a recording has been
made. You can insert/delete chapter
00:01:02
00:00
markers or hide unwanted scenes.
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
HIDE
When you play back a recording in video
edit mode, the entire recording will be
played back including the hidden scenes.
Video bar:
In the video bar, the record playback head
represents the actual position of the playback.
D Press the matching colour coded button
on the remote control to access the
options displayed at the bottom of the
menu.
ꢂExplanation of the options are
provided in the following pages.
{ NO CHAPTER }
Red button – Select this to erase all the
chapter markers in the current title.
{ CHAPTER }
Green button – Select this to access
chapter editing menu.
– { MERGE } : combine two chapters.
– { BACK } : return to the previous screen.
– { SPLIT } : insert a chapter marker.
A Press HDD-BROWSER on the remote
control, then press NEXTÉrepeatedly
until the { TITLES } and { INFO }
menus appear.
{ DIVIDE }
Yellow button – Select this to divide the
recording into two separate titles.
B Use ꢂꢃkeys to select a title and press
EDIT on the remote control.
ꢂThe HDD edit menu appears.
HDD
{ HIDE } / { STOP HIDE }
Blue and Green buttons – Select this to
define the scene to hide.
Title name
Genre
Video edit
Editing
{ SHOW } / { STOP SHOW }
Blue and Green buttons – Select this to
make the hidden scene visible.
E To exit, press EDIT.
C Select { Video edit } in the menu and
press NEXTÉ.
ꢂPlayback will start automatically.
TIPS: No editing can be carried out on a protected title, see page 54.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
66
dvdr9000h_eu_eng2.indd 66
2005-10-13 9:18:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Hard Disk (continued)
{ MERGE }
Merge/split a specific chapter
within a recording
Select this to merge the current chapter
with the chapter before it.
ꢂIf the chapter before it was a hidden
chapter, then the joined chapter will also
be hidden.
You can create a chapter by inserting
chapter marker (using the SPLIT option)
or remove a chapter marker (using the
MERGE option).
Title
A During HDD recording playback, press
Chapter 1 Chapter 2 Chapter 3 Chapter 4
EDIT on the remote control.
Chapter 1
Chapter 2 Chapter 3
B Press the Green button on the remote
control for { CHAPTER }.
(for example, chapter 2 is being selected)
ꢂThe chapter editing menu appears.
PAUSE
{ BACK }
HDD
Select this to return to the previous
screen.
{ SPLIT }
Select this to insert a new chapter
marker at the current point of playback.
This will allow you to access a specific
point in the recording easily or set a
chapter you wish to hide (for example,
commercial scenes).
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
SPLIT
HIDE
MERGE
BACK
Title
C Hold down
/
keys or use ꢁ/ ꢀ
keys on the remote control to search for
the scene you want to edit, then press
Chapter 1 Chapter 2 Chapter 3 Chapter 4
(PAUSE).
Chapter Chapter
Å
Chapter 1
Chapter 3 Chapter 4
2a
2b
D Press the matching colour coded button
on the remote control to access the
options displayed at the bottom of the
menu.
(for example, chapter 2 is being selected)
Helpful Hint:
– There is a limit on chapter markers that
can be stored within a title and on the hard
disk drive.
TIPS: No editing can be carried out on a protected title, see page 54.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
67
dvdr9000h_eu_eng2.indd 67
2005-10-13 9:18:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Hard Disk (continued)
Dividing titles
Hiding unwanted scenes
You can divide a title into two or more
titles. You can use this function to
separate and delete undesired portions of
a recording, such as commercials.
You can choose to hide certain scenes
for playback (e.g. skipping a commercial
scene) or make the hidden scene visible
again.
WARNING!
A During HDD recording playback, press
Once a title has been divided, it
cannot be reversed.
EDIT on the remote control.
B Hold down
/
keys or use ꢁ/ ꢀ
keys on the remote control to search for
the scene you want to edit, then press
A During HDD recording playback, press
EDIT on the remote control.
(PAUSE).
Å
PAUSE
HDD
C Press the Blue button on the remote
control for { HIDE }.
ꢂIt will set the start marker for hide.
PAUSE
HDD
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
HIDE
00:01:02
00:00
B Hold down
/
keys or use ꢁ/ ꢀ
[EDIT] = Exit
NO CHAPTER
keys on the remote control to search for
the scene you want to edit, then press
CHAPTER
DIVIDE
HIDE
(PAUSE).
Å
STOP HIDE
CANCEL
C Press the Yellow button on the remote
control for { DIVIDE }.
D Hold down
key on the remote
ꢂA new title and new index picture will
be created from the current point of
playback.
control to search for the end of the
scene to hide, then press the Green
button for { STOP HIDE }.
ꢂIt will set the end marker for hide.
Title1
Title 2
ꢂThe ‘hidden’ area will be greyed out.
Title1
Title2
Title 3
Otherwise, cancel the operation by
pressing the Blue button on the remote
control for { CANCEL }.
ꢀ
(for example, title 1 is being selected)
E To exit, press EDIT.
TIPS: No editing can be carried out on a protected title, see page 54.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
68
dvdr9000h_eu_eng2.indd 68
2005-10-13 9:18:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Hard Disk (continued)
Showing the hidden scene
Deleting all chapter markers
During recording, the chapter marker is
set automatically at a specific interval if
the function is active (see page 38).
You can choose to delete all the chapter
markers when the recording has finished.
A During HDD recording playback, press
EDIT on the remote control.
ꢂWhile in video editing mode, the
hidden chapter will play.
PAUSE
HDD
A During HDD recording playback, press
EDIT on the remote control.
PAUSE
HDD
Hidden
scenes
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
SHOW
00:01:02
STOP SHOW
CANCEL
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
HIDE
B Press the Blue button on the remote
control for { SHOW }, it will mark the
beginning of scene to show.
B Press the Red button on the remote
control for { NO CHAPTER }, it will
delete all the chapter markers in the
current title.
C Hold down
key on the remote
control to search for the end of the
scene to show, then press the Green
button for { STOP SHOW }.
Otherwise, cancel the operation by
pressing the Blue button on the remote
control for { CANCEL }.
ꢀ
Helpful Hints:
– All the hidden chapters will be played back
while in video editing mode.
– The selection of scenes to hide or show
can only be done within a title.
TIPS: No editing can be carried out on a protected title, see page 54.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
69
dvdr9000h_eu_eng2.indd 69
2005-10-13 9:18:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Recordable DVD
About editing recordable
DVDs
Index Picture screen
The Index Picture screen shows your
recordings on a recordable DVD. It
should appear on the TV once you load a
recordable DVD or when playback is
stopped.
This recorder offers various disc edit
options. You can change the disc content
and settings of a recorded DVD from the
editing menu. If a DVD R has been
finalised, it cannot be edited. The edited
contents may not be available if you play
the disc on another DVD player.
A
TITLES
Static lights
The Pianist
2-2
00:22:08
SPP
B
14:01:03
01:20:00
SPP
The island of lost dream
21:02:03
Lord of the Rings, The T
00:32:02
SPP
Habla Con Ella
The Ring
...
28:06:03
C
An Index Picture screen represents each
recording information saved :
A
The title’s index picture.
B
The length of recording, recording mode
and date of recording
C
The title’s name (or channel number and
date)
Helpful Hint:
The displayed options in the editing menu
differ depending on the situation and disc
type.
– Change disc name
– Make DVD compatible (DVD RW
only)
– If the disc is not recorded from this
recorder, the format of index picture screen
might be different. You have to adapt the
disc menu to the format of this recorder
before editing, see page 76.
– Finalise disc (DVD R only)
– Change title name
– Video editing
+RW
Disc name
Compatible
Finalise
Title name
Video edit
CLEAR
TIPS: No further recording and editing can be carried out on a finalised DVD R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
70
dvdr9000h_eu_eng2.indd 70
2005-10-13 9:18:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Recordable DVD (continued)
Deleting recordings/titles
Protecting the recorded titles
(DVD RW)
You can delete a specific title from the
disc. However, for DVD R discs, the
deleted space cannot be used for further
recordings.
You can choose to protect the recorded
title on a DVD RW in order to prevent
the recordings from being accidentally
erased or edited.
A Insert a recorded DVD into the
recorder.
A Insert a recorded DVD RW into the
recorder.
ꢂThe Index Picture screen appears.
ꢂThe Index Picture screen appears.
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu,
then press NEXTÉ.
ꢀ
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu,
then press NEXTÉ.
ꢀ
B Use ꢂꢃkeys to select a title from the
menu.
B Use ꢂꢃkeys to select a title from the
menu.
TITLES
Static lights
The Pianist
2-2
00:22:08
SPP
C Press the Blue button on the remote
14:01:03
01:20:00
SPP
The island of lost dream
control for { PROTECT }.
21:02:03
Lord of the Rings, The T
Once the title has been protected, the
Blue button option will change to
{ UNPROTECT }. Select this to cancel
the protect setting if required.
ꢀ
00:32:02
SPP
Habla Con Ella
The Ring
...
28:06:03
DELETE
PROTECT
DELETE
PROTECT
UNPROTECT
C Press the Red button on the remote
control for { DELETE }.
D A warning message appears. Press OK on
the remote control to proceed.
ꢂFor DVD RW disc, ‘Empty Title’ will
appear in the Index Picture screen where
the title was deleted. The empty space
can be used for new recordings.
ꢂFor DVD R disc, ‘Deleted title’ will
appear in the Index Picture screen where
the title was deleted. During playback,
the deleted title will be skipped.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
ꢀ
TIPS: No further recording and editing can be carried out on a finalised DVD R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
71
dvdr9000h_eu_eng2.indd 71
2005-10-13 9:18:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Recordable DVD (continued)
C Use ꢂꢃkeys to select { Compatible }
Changing the disc/title name
in the menu and press OK to confirm.
ꢂIf the option is not available for
selection, it means that the disc is already
compatible.
The original disc/title name is generated
automatically by the recorder. You can
change the disc/title name by following
the steps below.
Finalising the DVD R for
playback
A Insert a recorded DVD into the
recorder.
ꢂThe Index Picture screen appears.
It is necessary to finalise a DVD R disc
before you can play it on another DVD
player. Otherwise, the DVD R will only
play back on this recorder.
B Press EDIT on the remote control.
ꢂThe editing menu appears.
C Use ꢂꢃkeys to select { Disc name }
or { Title name } in the menu.
After a DVD R disc has been
finalised, no further recordings or
editing can be made to it. Make sure
that you have completed all the
recordings and editing before
finalising the disc.
D Use ꢂꢃkeys to change the character/
number or make an entry by using the
alphanumeric keypad 0-9.
ꢂUse ꢁꢀkeys to move to the
previous or next field.
To switch between upper and lower case
characters, press a/A on the remote
control.
ꢀ
A Insert a recorded DVD R into the
recorder.
ꢂThe Index Picture screen appears.
E Press OK to confirm the changes.
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu,
then press NEXTÉ.
ꢀ
Making the edited DVD RW
compatible
B Press EDIT on the remote control.
ꢂThe edit menu appears.
C Use ꢂꢃkeys to select { Finalise } in
The edited DVD RW may still display
the original titles or hidden scenes when
played back on other DVD players. This
function allows you to make an edited
DVD RW compatible with other players.
the menu and press OK to confirm.
D A warning message appears. Press OK on
the remote control to proceed.
ꢂFinalisation may take more than 30
minutes, depending on the length of
recordings.
A Insert a recorded DVD RW into the
recorder.
ꢂDo not try to open the disc tray or
turn the power off as this may render the
disc unusable.
ꢂThe Index Picture screen appears.
B Press EDIT on the remote control.
ꢂThe editing menu appears.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
ꢀ
TIPS: No further recording and editing can be carried out on a finalised DVD R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
72
dvdr9000h_eu_eng2.indd 72
2005-10-13 9:18:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Recordable DVD (continued)
E Press the matching colour coded button
Video editing
on the remote control to access the
options displayed at the bottom of the
menu.
This recorder allows you to edit the video
content after a recording has been made.
You can add/delete chapter marker or
hide unwanted scenes.
Title
Chapter Chapter Chapter Chapter
chapter markers
{ NO CHAPTER }
Red button – Select this to erase all the
chapter markers in the current title.
When you play back a recording in video
edit mode, the entire recording will be
played back including the hidden scenes.
{ CHAPTER }
Green button – Select this to access
chapter editing menu.
A Insert a recorded DVD into the
recorder.
ꢂThe Index Picture screen appears.
[EDIT] = Exit
NO CHAPTERS CHAPTER
TITLE
SPLIT
HIDE
HIDE
Otherwise, press HDD-BROWSER
and select { Disc Tray } in the menu,
then press NEXTÉ.
ꢀ
MERGE
BACK
B Use ꢂꢃkeys to select a title and press
{ MERGE }
Select this to merge the current chapter
with the chapter before it.
Note: If the two chapters were hidden,
then the joined chapter will also be hidden.
ꢀ(PLAY) to start playback.
C Hold down
/
keys or use ꢁ/ ꢀ
keys on the remote control to search for
the scene you want to edit, then press
(PAUSE).
Å
{ BACK }
Select this to return to the previous
screen.
D Press EDIT on the remote control.
ꢂThe video editing menu appears.
PAUSE
+RW | SHREK | EDIT MODE
{ SPLIT }
Select this to insert a new chapter marker
at the current point of playback. This will
allow you to access a specific point in the
recording easily or set a chapter you wish
to hide.
00:01:02
00:00
{ HIDE } / { SHOW }
[EDIT] = Exit
NO CHAPTERS CHAPTER
TITLE
HIDE
Select this to hide or show the current
chapter. During playback, the hidden
chapter will be skipped.
TIPS: No further recording and editing can be carried out on a finalised DVD R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
73
dvdr9000h_eu_eng2.indd 73
2005-10-13 9:18:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Recordings - Recordable DVD (continued)
{ TITLE }
Yellow button – Select this to access title
editing menu.
[EDIT] = Exit
NO CHAPTERS CHAPTER
TITLE
HIDE
DIVIDE
BACK
INDEX PIC.
{ DIVIDE } - for DVD RW only
Select this to create a new title from the
current point of playback. The existing title
will be divided into two titles.
Warning! Once a title has been divided, it
cannot be reversed.
{ BACK }
Select this to return to the previous screen.
{ INDEX PIC }
Select this to use the current scene as the
index picture.
Note: In the Index Picture screen, normally
the first frame of a recording is shown as
the title’s index picture.
{ HIDE } / { SHOW }
Blue button – Select this to hide or show
the current chapter.
Helpful Hints:
– All the hidden chapters will be played back
while in video editing mode.
– The selection of scenes to hide or show can
only be done within a title.
– There is a limit on chapter markers that
can be stored within a title and the hard disk
drive.
TIPS: No further recording and editing can be carried out on a finalised DVD R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
74
dvdr9000h_eu_eng2.indd 74
2005-10-13 9:18:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
DV Specials
Preferences
Recorder Preferences
Date
Time
see page 76
Sound
Preferences
Sound mode
see page 76
Night mode
A Press SYSTEM on the remote control.
ꢂThe system setup menu appears.
B Press ꢃto select { Preferences } and
press NEXTÉrepeatedly to view the
available setup options, then press ꢃto
access.
Disc
Preferences
Adapt menu
Delete all
see page 76
Recording DV Specials Sound Disc Access
Preferences
Setup
Access
Preferences
Child lock
see page 77
C Select the setting you wish to change and
press NEXTÉ. Once you have changed
the setting, press OK to confirm and
back to the previous selected item.
ꢂInstructions and explanations of the
options are provided in the following
pages.
Change pin
Features
ꢂIf the selection in the menu is greyed
out, that means the feature is not
available or cannot be changed in the
current state.
Preferences
Auto resume
see page 77
D To exit, press SYSTEM.
Note:
For { Recording }, see page 38.
75
dvdr9000h_eu_eng2.indd 75
2005-10-13 9:18:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
DV Specials settings
Set the date and time for DV camcorder recording update functions.
Once it has been set, the date and time will be updated automatically after
a DV camcorder recording.
Date
Time
{ 00 - 00 - 0000 } – Use ꢂꢃkeys to set the day, month and year,
press NEXTÉto move to the next digit field.
Once complete, press OK.
{ 00 : 00 : 00 }
– Use ꢂꢃkeys to set the hours, minutes and
seconds, press NEXTÉto move to the next digit
field. Once complete, press OK.
Sound settings (underlined options are the factory default settings)
Sound mode
This setting is only required if you used the recorder’s AUDIO OUT L/R
sockets to connect other audio/video device.
{ Stereo }
– Select this to hear the sound from the left and right
audio channels. Use this setting when this recorder
is connected to a TV or Stereo system.
{ Surround }
– Select this if the connected audio/video device is
compatible with Dolby Surround. Dolby Digital and
MPEG-2 multi-channel are mixed to a Dolby
Surround compatible two-channel output signal.
Night mode
This mode optimises playback of sound at low volume. High volume
outputs will be softened and low volume outputs are brought upward to
an audible level.
{ On }
{ Off }
–
–
Turns on night mode.
Turns off night mode feature. Selects this to enjoy the
surround sound with its full dynamic range.
Disc settings
Adapt menu
If a DVD RW has been recorded in a computer drive or in another
recorder, the Picture Index screen may not be displayed correctly.This
feature allows you to change the format of the disc to ‘Philips’ type.
Once you press OK, a message to confirm your action will appear on the
TV.
Delete all
Select this to delete all the recordings from the current recordable DVD.
Once you press OK, a message to confirm your action will appear on the
TV.
76
dvdr9000h_eu_eng2.indd 76
2005-10-13 9:18:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Access settings (underlined options are the factory default settings)
You will be prompted to enter the four-digit pin code.
–
When doing this for the first time, use the alphanumeric keypad 0-9
on the remote control to enter any four-digit pin code you prefer.
If you forget your four-digit pin code, key in ‘1504’.Then enter any
four-digit you prefer and enter the same pin code again to confirm it.
–
Childlock
With this feature, you can prevent children from viewing certain discs or
the recorded titles in the HDD. When this feature is enabled, it will
appear as { CHILDLOCK } at the bottom of the coloured options screen
whenever you select a title in the content menu. You can press the
Yellow button on the remote control to set the childlock on or off.
Note: This recorder can memorise settings for 50 discs.
{ On }
–
Turns on child lock function.
A four-digit pin code must be entered in order to play
the locked disc or title in the HDD.
All discs can be played.
{ Off }
–
Change pin
Use the alphanumeric keypad 0-9 to enter your new four-digit pin code.
You must enter the same pin code again to confirm it.
To cancel your change, press ꢃto select { Cancel } in the menu and
press OK on the remote control.
Enter PIN of your choice
This will be used to access locked features.
Pin Code
####
Cancel
Features settings (underlined options are the factory default settings)
Auto resume
With this feature, you can resume playback of the disc from where it last
stopped point. This applies to the last 20 DVDs andVideo CDs you
played.
{ On }
{ Off }
–
–
Turns on auto resume mode.
The disc will always start from the beginning when you
load a disc or start playback.
77
dvdr9000h_eu_eng2.indd 77
2005-10-13 9:18:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
System
Recorder Setup
Setup
Eco mode
Off
Second RC
Off
Before you start...
Mark the contents in the temporary HDD
storage (time shift buffer) for which you
wish to record to the HDD, see page 36.
Otherwise, all the contents will be cleared
when you access the { Setup } option.
Full
Bright
OSD
see page 79
see page 80
Display
Time-date
Setup
Clock preset
Time
Date
Analogue Ch.
Setup
Auto search
Follow TV
Sort
see page
81~82
Favourites
A Press SYSTEM on the remote control.
Digital Ch.
Setup
ꢂThe system setup menu appears.
Video fav.
Radio fav.
Sort video
Sort radio
B Press ꢃrepeatedly to select { Setup }
and press NEXTÉ.
see page 83
ꢂA warning message appears. Press OK
to continue or select { No } in the menu
to abort the operation.
Video output
Audio output
Audio input
Language
Setup
TV shape
ꢂPlayback will pause.
Black level
Horizontal
Video output
see pages
84~85
System Time-date Analogue Ch. Video output
Setup
Progressive
Setup
Digital output
HDMI
see page 85
see page 86
C Press NEXTÉrepeatedly to view the
available setup options, then press ꢃto
access.
Setup
Digital EXT2
PCM encoding
ꢂInstructions and explanations of the
options are provided in the following
pages.
ꢂIf the selection in the menu is greyed
out, that means the feature is not
available or cannot be changed in the
current state.
Set up
Menu
Audio
Subtitle
Subtitle type
see page 86
D To exit, press SYSTEM.
78
dvdr9000h_eu_eng2.indd 78
2005-10-13 9:18:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
System settings (underlined options are the factory default settings)
Eco mode
This is an energy saving mode.
{ On }
– When you switch the recorder to standby mode,
the display panel will turn blank to save power.
– Clock will display on the recorder’s display panel
when switching off to standby mode.
{ Off }
Second RC
OSD
{ On }
– Enables control of this recorder with a second
remote control (not supplied).
– Disables second RC control function.
{ Off }
Select the level of On-screen display information.
{ Full }
– Complete information is always displayed during
use.
{ Reduced }
{ Normal }
– The help text and colour button bar will be
removed from the display.
– The help-text will be removed from the menu.
Display
Select the brightness of the recorder display panel.
{ Bright }
{ Dimmed }
{ Off }
– Normal brightness.
– Medium brightness.
– Turns off the display.
Tray light
Select to turn on or off the recorder’s tray light which is located at the
centre of the recorder.
{ Off }
{ On }
– Turns off the tray light.
– Turns on the tray light.
Skip
Set the amount of time you want to skip ahead in tuner mode when you
press the NEXTÉbutton on the remote control, press OK to confirm
the setting. The maximum setting is 60 minutes.
Replay
Set the amount of time you want to skip backwards in tuner mode when
you press the ꢁREPLAY button on the remote control, press OK to
confirm the setting. The maximum setting is 60 minutes.
PBC
Play Back Control feature is only applicable forVCD/SVCD only. It allows
you to playVideo CDs (2.0) interactively, following the menu on the
display.
{ Off }
– The VCD/SVCD will skip the index menu and
playback directly from the beginning.
{ On }
– The index menu (if available) will appear on the TV
once you insert a VCD/SVCD.
Note: This option is invisible unless a VCD/SVCD is in the disc tray
.
Version Info
This is only an information screen that shows the current version of
firmware installed in your recorder. You may require this information for
future online firmware upgrades.
79
dvdr9000h_eu_eng2.indd 79
2005-10-13 9:18:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Time-Date settings (underlined options are the factory default settings)
Clock preset
The time/date can be set automatically on this recorder if the storedTV
channel transmits a time signal.
{ Auto }
– The recorder will automatically detect the first
available channel which is transmitting the time/date
information.
{ XXX }
(preset number)
{ Off }
– Select the TV channel to use for transmitting
the time/date information.
– Select this before setting the time/date manually.
If the time/date is incorrect, you must manually set the time/date here.
Time
Date
{ 00 : 00 }
– Use ꢂꢃkeys to set the hours and minutes, press
NEXTÉto move to the next digit field. Once
complete, press OK.
{ 31-01-2005 }
– Use ꢂꢃkeys to set the day, month and year,
press NEXTÉto move to the next digit field.
Once complete, press OK.
80
dvdr9000h_eu_eng2.indd 80
2005-10-13 9:18:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Analogue Channel settings
Although this recorder selects all the available analogueTV channels
during basic installation, you may want to repeat the process later if more
channels become available in your area or if you are reinstalling the
recorder.
Analogue Ch.
Setup
Auto search
Follow TV
Sort
A Press SYSTEM on the remote control. Select { Setup } in the menu
and press NEXTÉrepeatedly to select { Analogue Ch. }.
Favourites
B Press ꢃrepeatedly to select the following settings in the menu and
press NEXTÉto enter its options.
Auto search
Follow TV
Press OK on the remote control to start the automaticTV channel
search process and replace all previously stored analogueTV channels.
This process may take several minutes.
This feature is only available if you have connected this recorder to your
TV using the EXT1TOTV-I/O scart socket. It allows you to change the
order of theTV channels (analogue only) stored in your recorder to
match the order on theTV.
1) Press OK to confirm the message on the TV, ‘TV 01’ will appear on
the display panel. Use the TV’s remote control to select
programme number {1} at your TV, then press OK on the recorder’s
remote control.
– If the recorder finds the same TV channel as on the TV, it stores it
as ‘P01’. ‘TV 02’ will then appear on the display panel.
– If no video signal is received from the TV, ‘NO TV’ will appear.
2) Use the TV’s remote control to select programme number {2} at
your TV, then press OK on the recorder’s remote control.
Repeat the above steps until you have assigned all the TV channels.
Note: Press BACK will interrupt the follow TV process.
Sort
You may not agree with the sequence in which the individualTV channels
have been allocated to the programme numbers. You can use this setting
to rearrange theTV channels.
001 ARD
004 TELET
005 CHAN
006 RTL4
007 SBS6
004 CHAN
005 RTL4
006 ORF2
007 SBS6
002 TELET
003 ORF2 ---
004 TELET
ORF2
ORF2
1) Use ꢂꢃkeys to select the TV channel that you want to move and
press OK to confirm.
2) Use ꢂꢃkeys to shift the TV channel to the desired position and
press OK to place the TV channel at the current position.
Favourites
Press OK to mark your favouriteTV channels for quick access by using
the channel up/down button on the remote control.
– The TV channels can be accessed using the
CH + − on the remote control.
Favourites
1
2
3
4
5
6
7
NBC
– The TV channels can only be accessed by pressing
the corresponding number button on the remote
control.
MTV
81
dvdr9000h_eu_eng2.indd 81
2005-10-13 9:18:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Analogue Channel settings - manual search
In some cases, not all of the availableTV channels may have been found
and stored during basic installation. In this case, you will need to search
for and store the missing or codedTV channels manually.
Analogue Ch.
MHz
Setup
Entry mode
Entry
167.5 MHz
Preset
P 04
A Press SYSTEM on the remote control. Select { Setup } in the menu
Preset name
RTL4
and press NEXTÉrepeatedly to select { Analogue Ch. }.
B Press ꢃrepeatedly to select the following settings in the menu and
Decoder
TV system
Nicam
Off
On
On
PAL-BG
Off
press NEXTÉto enter its options.
Fine t une
STORE
SEARCH
Entry Mode
Entry
Select manual search based on channel allocation or frequency entry
{ Channel, S. Channel (Special channel), MHz (frequency) }.
Note: S. Channel refers to specified hyperband channels.
–
–
Use the alphanumeric keypad 0-9 to enter the frequency/channel
number, press OK and the Green button for { STORE }.
OR
Press the Blue button on the remote control for { SEARCH }, once
you have found the correct frequency/channel, press the Green
button for { STORE }.
Preset
Use the alphanumeric keypad 0-9 to enter the preset channel number
for the channel to store (e.g.,‘01’), press OK and the Green button for
{ STORE }.
Preset name
Decorder
Use the alphanumeric keypad 0-9 to enter the preset channel name,
press OK and the Green button for { STORE }.
Maximum four characters for preset channel name.
If the currentTV channel is transmitted by codedTV signals that can only
be viewed properly with a decoder which is connected to the
EXT2 AUX-I/O socket, you need to activate the connected decoder.
{ On }
–
Select this to allocate the connected decoder to this
TV channel.
{ Off }
–
Turns off the decoder feature.
TV system
NICAM
Set theTV system that produces the least distortion of picture and sound.
See last page “TV System Guide” for more information.
NICAM is a digital sound transmission system. It can transmit either one
stereo channel or two separate mono channels.
{ On }
{ Off }
–
–
Improves the sound transmission of the TV channel.
Select this if the reception is poor and the sound is
distorted.
Finetune
Select this to fine-tune theTV channel manually if the reception is poor.
Use ꢁꢀkeys to adjust the frequency and press OK to confirm.
82
dvdr9000h_eu_eng2.indd 82
2005-10-13 9:18:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Digital Channel settings
Although this recorder selects all the available digital TV channels during
basic installation, you may want to repeat the process later if more
channels become available in your area or if you are reinstalling the
recorder. It also allows you to adapt the digital TV and radio channels to
your personal preference.
Digital Ch.
Setup
Video fav.
Radio fav.
Sort video
Sort radio
A Press SYSTEM on the remote control. Select { Setup } in the menu
Digital Ch.
and press NEXTÉrepeatedly to select { Digital Ch. }.
Setup
Digital install
Update install
Full install
B Press ꢃrepeatedly to select the following settings in the menu and
press NEXTÉto enter its options.
Check signal
Video Fav./Radio Fav.
Sort video/Sort radio
Press OK to mark your favourite digitalTV/radio channels for quick
access by using the channel up/down button on the remote control.
– The TV/radio channels can be accessed using the
CH + − on the remote control.
– The TV/radio channels can only be accessed by
pressing the corresponding number button on the
remote control.
You may not agree with the sequence in which the individualTV/radio
channels have been allocated to the programme numbers. You can use
this setting to rearrange theTV/radio channels.
001 ARD
004 TELET
005 CHAN
006 RTL4
007 SBS6
004 CHAN
005 RTL4
006 ORF2
007 SBS6
002 TELET
003 ORF2 ---
004 TELET
ORF2
ORF2
1) Use ꢂꢃkeys to select the TV/radio channel that you want to move
and press OK to confirm.
2) Use ꢂꢃkeys to shift the TV/radio channel to the desired position
and press OK to swap the TV/radio channel with the TV/radio
channel at the current position.
Note: During sorting, the alphanumeric keypad 0-9 on the remote
control can be used to select a preset number.
Updt Install
Full Install
It behaves the same as the auto channel search except it only adds new
channels to your existing preset list. New channel refers to a channel
that is currently not installed. It will be added after the last free preset
position. Press OK to start new channels search and install.
Press OK to start digital channels search and install. It will replace all
previously stored digital TV/radio channels.
Check Signal
Press OK to display signal strength and quality information of the digital
tuner. It will help to find the best position of antenna.
Use ꢂꢃkeys to change the frequency or channel number and press
OK to check the signal quality. Position the antenna at the area where
the maximum signal quality is reached.
CHECK DIGITAL SIGNAL QUALITY
Check the antenna connections and position.
Position the antenna to reach best signal quality.
222.22
Frequency
Go back
Low
Low
High
High
Signal strength
Signal quality
83
dvdr9000h_eu_eng2.indd 83
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Video settings (underlined options are the factory default settings)
TV Shape
The picture shape can be adjusted to fit yourTV.
{ 4:3 Letterbox } – For a ‘wide-screen’ display with black bars on the
top and bottom.
{ 4:3 PanScan } – For a full-height picture with the sides trimmed.
{ 16:9 }
– For wide-screen TV (frame ratio 16:9).
Black Level
Adapts the colour dynamic for NTSC disc.
{ Normal }
{ Enhanced }
– Normal colour contrast.
– Improves the colour contrast and brightens the
picture of an NTSC-compatible DVD.
Horizontal
Use ꢁꢀkeys to adjust the horizontal position of the picture on yourTV
screen, press OK to confirm the setting.
Video Output
Chooses the type of video output that matches the video connection
between this recorder and yourTV.
{ RGB•CVBS } – For RGB or CVBS connection.
{ S-Video }
– For S-Video connection.
{ Automatic }
– The output setting will automatically follow the
video signal received.
Progressive
Before enabling the progressive scan feature, you must ensure that yourTV
can accept progressive signals (a progressive scanTV is required) and you
have connected the recorder to yourTV using theY Pb Pr (see page 19).
{ On }
{ Off }
– Turns on progressive scan mode.
– Disables the progressive scan mode.
Note: The progressive video output will be disabled if the HDMI output
is turned on
.
Video settings for HDMI connection only
HDMI
This feature is only applicable for HDMI connection (see page 19).
{ Auto }
– Turns on the HDMI output. The video output
resolution will automatically follow the video signal
received.
{ On }
– Turns on the HDMI output. The video output
resolution will follow the setting at { Video upscalling }.
– Disables the HDMI output.
{ Off }
Video upscalling
HDMI output
Set the video resolution depending on the capability of the connected TV/
device (480p, 576p, 720p, 768p, 1080i).
‘i’ denotes interlace and ‘p’ denotes progressive.
Note: This setting is not available if the HDMI setting is set to { Auto }.
Changing the video upscalling will normally cause the TV to blank out for
a few seconds as it adjusts to the new setting.
This setting determines the video output colour format.
{ RGB }
{ YPbPr }
– Gives brighter colours and a deeper black.
– Provides a very fine shade of colour. This is the
standard setting for HDMI compatible devices.
84
dvdr9000h_eu_eng2.indd 84
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Video settings (underlined options are the factory default settings)
Video settings for Pixel Plus only
Noise red. (reduction)
Use ꢁꢀkeys to set the level of noise reduction and press OK to
confirm the setting.
Sharpness
Use ꢁꢀkeys to adjust the level of picture sharpness and press OK to
confirm the setting.
Note: The above two options are invisible unless the Pixel Plus feature
is turned on
.
Audio Output settings (underlined options are the factory default settings)
Digital output
This setting is only required if you are using the recorder’s COAXIAL/
OPTICAL OUT socket to connect other audio/video device.
{ All }
–
Select this if the connected device has a built-in Multi-
Channel decoder that supports one of the multi-
channel audio format (Dolby Digital, MPEG-2).
Select this if the connected device is not capable of
decoding multi-channel audio. The system will convert
the Dolby Digital and MPEG-2 multi-channel signals to
PCM (Pulse Code Modulation).
{ PCM }
–
{ Off }
–
Select this to deactivate the digital audio output. For
example, if you use the AUDIO OUT sockets to
connect this recorder to a TV or Stereo system.
HDMI
This setting is only required if you are using the recorder’s HDMI OUT
socket to connect yourTV or other display device.
{ Auto }
–
Select this if you want to enjoy the multi-channel audio
output through your HDMI connection.
{ Disable }
–
Select this if the connected device is not able to
output the sound through the HDMI connection or the
playback audio format is not supported by HDMI
connection (e.g. projector, SACD).
Note: Make sure that you have alternative audio connection from the
recorder to your TV or the display device for the sound output (see page
20).
Helpful Hint:
– It is not possible to listen to SACDs or copy-controlled DVD-Audio CPPM
(Content Protection for Playable Media) sources using the HDMI connection.
85
dvdr9000h_eu_eng2.indd 85
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options (continued)
Audio Input settings (underlined options are the factory default settings)
Digital EXT2
This setting is only required if you are using the recorder’s COAXIAL IN
socket to connect to the coaxial output on your cable box or satellite
receiver.
{ Coaxial }
–
Select this to enable 5.1-channel recording from the
cable box or satellite receiver you have connected.
Not applicable for this model.
{ Optical }
{ Off }
–
–
Select this to disable the digital audio input.
PCM Encoding
Select this if the connected device is not capable of decoding multi-
channel audio. The system will convert the Dolby Digital and MPEG-2
multi-channel signals to PCM (Pulse Code Modulation).
{ On }
–
Select this to enable the PCM. All audio signals are
downmixed to linear PCM (2-channel).
Select this to disable the PCM.
{ Off }
–
A
B
C
Language settings
Menu
Select the menu language for this recorder’s on-screen display. This setting
will be taken from the basic installation.
Audio
Select the preferred audio language for DVD playback and Digital
TerrestrialTuner (DTT) reception.
Subtitle
Select the preferred subtitle language for DVD playback and Digital
TerrestrialTuner (DTT) reception.
Subtitle type
DigitalTerrestrialTuner (DTT) reception may carry multiple subtitle types.
Select the subtitle type you want to be shown.
–
–
{ Off }
{ Normal }
No subtitles are displayed on the screen.
Normal subtitles are shown.
–
{ Hard of hearing } Display special subtitles. For example,
descriptions for sound and action.
D
Helpful Hints:
– If the selected audio/subtitle language is not available on the disc, the disc’s
default language will be used instead.
– For some DVDs, the subtitle/audio language can only be changed via the DVD
disc menu.
86
dvdr9000h_eu_eng2.indd 86
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
E Read the instructions on the TV and
confirm your action by pressing OK.
ꢂThe setup is now completed and you
can start to enjoy the high quality picture.
Setting up Progressive Scan
feature
(for Progressive Scan TV only)
Otherwise, select { Cancel } and press
OK to go back to the previous menu.
ꢀ
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
F To exit the menu, press SYSTEM.
If no picture:
A Disconnect the recorder’s ~MAINS from
the power supply.
Before you start...
– Ensure that you have connected this
recorder to a progressive scan TV using
the Y Pb Pr connection (see page 19).
– Ensure that you have completed the
basic installation and set-up.
B Hold down
on the recorder whilst
reconnect its ~MAINS to the power
supply.
Helpful Hint:
– There are some progressive scan TVs and
High-Definition TVs that are not fully
compatible with this unit, resulting in an
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the recorder and your TV.
– If the HDMI video output is turned on, the
progressive output signal will change to
interlace.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
B Turn on the recorder and press
SYSTEM on the remote control.
ꢂThe system setup menu appears.
C Press ꢃto select { Setup } and press
NEXTÉto select { Video output }.
ꢂA warning message appears. Press
OK to continue.
Video output
Setup
Copyright notice
TV shape
The making of unauthorised copies of
copy-protected material, including
computer programmes, files, broadcasts
and sound recordings, may be
Black level
Horizontal
Video output
Progressive
On
infringement of copyrights and constitute
a criminal offence. This equipment
should not be used for such purposes.
D Press ꢃto highlight { Progressive } and
press NEXTÉto access. Press ꢃto
select { On }.
87
dvdr9000h_eu_eng2.indd 87
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
What kind of disc should I use for
recording?
What are Titles and Chapters?
A DVD disc contains Titles and Chapters,
which are similar to the Titles and Chapters of
a book. A Title is often a complete movie and
is broken down into Chapters, or individual
scenes from the movies.
You can only record on DVD R, DVD RW
or DVD+R DL discs. DVD R/ RW is the
most compatible recordable DVD format in
the market today. They are fully compatible
with most of the existing DVD-Video players
and DVD-ROM drives in computers.
Title
Chapter Chapter Chapter Chapter
What is the capacity of a DVD R
and DVD RW?
4.7GB, or equivalent to six CDs. You can
store only one hour of recording on a single
disc at the highest quality (DVD standard) and
about 8 hours recording at the lowest quality
(VHS standard).
chapter markers
Programmes are recorded as a single title.
They may consist of one chapter or a few
chapters within a title, depending on the
recording settings.
What is the difference between
DVD R and DVD RW?
How do I set up Titles and
Chapters?
The recorder will automatically create a new
Title every time you start a new recording.
You can then add Chapters to these
recordings manually or have them
automatically inserted at a specific intervals.
DVD R is “recordable” and DVD RW is
“erasable” and “rewritable”. With a DVD R,
you can record multiple sessions on the same
disc. But when the disc is full, you cannot
record any more on the disc. The DVD RW
allows you to record over the same disc
literally hundreds of times.
What does “finalising” a disc do?
Finalising a disc locks the disc so it can no
longer be recorded. This is only required for
DVD R. It will then be compatible with
virtually any DVD player. To remove a disc
without finalising it, simply stop recording and
eject the disc. You will still be able to record
on the disc if there is storage space for more
recordings.
What is DV IN socket?
DV (Digital Video) IN socket on this recorder
is an i.LINK-compliant input socket. You can
connect a DV-equipped camcorder to this
recorder using a single DV cable for copying
digital video, digital audio and data.
– This recorder is only compatible with DV-
format (DVC-SD) camcorders. Digital satellite
tuners and Digital VHS video recorders are
not compatible.
How good is the quality of the
– You cannot connect more than one DV
camcorder at a time to this recorder.
– You cannot control this recorder from
external equipment connected via the DV IN
socket.
– It is not possible to record the contents
from this recorder to your DV camcorder via
the DV IN socket.
recording?
There are a few picture quality levels to
choose from, ranging from “HQ” (1 hour
recording at high quality) to “SEP” (8 hours
recording at VHS quality) on a recordable
DVD.
Record Mode
Hours of recordings can be stored on the Ł
HDD or an empty DVD recordable disc.
HDD
DVD R/
DVD+R Ł
(400 GB)
DVD RW
Double Layer
Can I copy a VHS tape or DVD
from an external player?
Yes, but only if the VHS tape or DVD is not
copy protected.
HQ (high quality)
SP (standard play)
80
1
2
2.5
3
4
1 hr 55 mins
3 hrs 40 mins
4 hrs 35 mins
5 hrs 30 mins
7 hrs 20 mins
11 hrs 5 mins
14 hrs 45 mins
160
200
250
330
500
650
SPP (standard play plus)
LP (long play)
EP (extended play)
SLP (super long play)
SEP (super extended play)
6
8
88
dvdr9000h_eu_eng2.indd 88
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions (continued)
What is Pixel Plus?
Some recordings listed on the HDD
menu cannot be played or copied to
disc.
Some TV broadcasts or videos from external
device that are recorded to this recorder may
contain copy protection signals. Such material
cannot be played back from the HDD or
copied to a recordable DVD.
Philips’ Pixel Plus technology is an adaptive
method of improving the picture quality of
output signals from any source such as TV
reception, satellite receiver inputs, DVD
recordings and DVD playback at any quality
level. The picture quality of processed video
signals is analysed and dependent on the
degree of disturbances,
The copy-protected recordings are marked
Philips proprietary noise reduction, time-base
correction and sharpness improvement is
applied automatically on the output signal.
This results in superior quality video output
from the HDMI output on any HDMI TV and
Philips’ Pixel Plus TVs.
C
with the icon in the HDD menu. They are
either fully protected (copy never) or partially
protected (copy once). For partially protected
recording, playback is possible but once copied
to a recordable DVD, the recording will be
removed from the HDD.
What is DVB?
What is HDMI?
Digital Video Broadcasting (DVB) is a standard
for digital television maintained by the DVB
Project. This recorder has an integrated digital
TV tuner (DVB-T) that enables reception of
free digital video and radio broadcasts via a
terrestrial antenna. If offers the best possible
digital audio and video quality. More stations
can be transmitted in the same frequency band
and additional media services such as city
guides, web-content are possible. The number
of these free-to-air stations might vary from
country to country.
High-Definition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers perfect picture
and sound quality, completely free from noise.
HDMI is fully backward-compatible with DVI.
As required by the HDMI standard, connecting
to HDMI or DVI products without DHCP
(High-bandwidth Digital Content Protection)
will result in no Video or Audio output.
What is video upscalling?
With Video Upscalling you can increase the
resolution of the DVD video signals from SD
(Standard Definition) to HD (High Definition).
The High Definition output can only fed
through the YPbPr and HDMI connections.
This recorder allows you to increase the
picture resolution up to 720p and 1080i.
Before adjusting the setting, make sure that
your television is able to support the video
resolution or standard.
89
dvdr9000h_eu_eng2.indd 89
2005-10-13 9:18:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware Upgrade
Installing the latest firmware
Periodically Philips will issue upgrades for
the firmware that was initially installed in
your recorder as the firmware is
continuously refined for greater stability
and compatibility of the recorder.
CAUTION! Power supply must not be
interrupted during upgrade!
System
Setup
Jump forward
Jump back
mm : ss
mm : ss
Version Info
A Get the version information of this
recorder by pressing SYSTEM on the
remote control and select { Setup } >
{ System } > { Version Info } in the
menu.
ꢂWrite down the information for your
current software version.
com/ support’ to check the availability of
the latest firmware upgrade. Download
the firmware to a CD-ROM.
C Press OPEN CLOSE on the front of
the recorder to open the disc tray.
D Insert the CD-ROM and press
OPEN CLOSE again.
ꢂThe firmware will start to install on
the recorder automatically.
90
dvdr9000h_eu_eng2.indd 90
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING!
Under no circumstances should you try to repair the system yourself, as this
will invalidate the warranty. Do not open the system as there is a risk of
electric shock.
If a fault occurs, first check the points listed below before taking the system for
repair. If you are unable to remedy a problem by following these hints, consult
your dealer or Philips for help.
Problem (General)
Solution
No power.
– Press the STANDBY-ON button on the front of the recorder to
turn on the system.
– Make sure the AC outlet has power.
The message “IS TV ON?”
appears on the display panel.
– This recorder will not operate until you complete the first
installation. Read chapter “Step 3: Installation and Set-up” for
details.
The buttons on the recorder
do not work.
– There is a technical problem. Disconnect the recorder from the
power outlet for 30 seconds, then connect again. If the recorder
still will not operate, then reset it to the default factory settings :
1) Disconnect the recorder from the power outlet.
2) Press and hold down STANDBY-ON button on the front of
the recorder while reconnecting to the power outlet.
3) Release STANDBY-ON button when “IS TV ON?” appears
on the display. All the information stored in the memory
(programmes, time) will be cleared. You may need to reset
the recorder settings after completing the basic installation.
Remote control does not
work.
– Aim the remote control directly at the sensor on the front of
this recorder (not towards TV). If the recorder receives a signal
from the remote control, the icon Dwill appear on the display.
– Remove any obstacles between this recorder and the remote
control.
– Batteries are weak, replace the batteries.
– The remote control’s manufacturer code returned to the default
setting when you replaced the batteries. Reset the code (page
15).
– Press SELECT DEVICE to select the correct mode.
No picture.
– Turn on your TV and set to the correct Video In channel for the
recorder. You may go to Channel 1 on your TV, then press the
channel down button on your TV’s remote control until you see
the TV programme.
– Check the video connection between this recorder and the TV.
– It may be due to the recorder’s video output setting not being
matched to the video connection. You can reset the recorder as
below :
1) Disconnect the recorder’s ~MAINS from the power supply.
2) Hold down
on the recorder whilst reconnect its ~MAINS
to the power supply.
91
91
dvdr9000h_eu_eng2.indd 91
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Problem (General)
Solution
– Check the recorder audio connection. Read chapter “Basic
Recorder Connections - Connecting the audio cables” for
details.
No sound.
– Set the Analogue output or Digital output correctly, based on
the device you have connected to this recorder. Read chapter
“System Menu Options - Audio Output settings” for details.
No TV signal received from
the recorder.
– Have your aerial or cable TV signal checked.
– Install the TV channel. Read chapter “System Menu Options -
Analogue Channel settings - Auto Search” for details.
The message ‘Disc contains
unknown data’ appears.
– This message may appear if you insert a disc that was not
finalised or contains junk data. DVD Rs that have not been
finalised are very sensitive to fingerprints, dust, or dirt. This may
cause problems during recording. To use the disc again, do the
following :
1) Make sure that the surface of the disc is clean.
2) Press OPEN/CLOSE on this recorder to open the disc tray.
3) Insert the disc but do not close the tray.
4) Hold down button number {5} on the remote control until
the tray closes. This recorder will start the repair process.
5) If the disc is recovered, the Picture Index screen will appear.
Please observe the following:
– Error during recording : The title may be missing.
– Error while changing the title/index picture: The original title/
index picture may be visible.
– Error while finalising : The disc appears not to have been
finalised.
The message ‘NO SIGNAL’
appears.
– Check that the cable is plugged in firmly.
– If a recording is made from a video recorder, change the
tracking on the video recorder.
– This recorder may not be able to recognise the video input
signal if this signal is poor or does not comply with relevant
standards.
‘X’ appears at the bottom of
the TV screen.
– No aerial signal received for the current channel or no video
signal received from the external input channel (EXT1, EXT2,
CAM1 or CAM2).
– Check the antenna connection.
– Check the connection and turn on the connected device.
92
dvdr9000h_eu_eng2.indd 92
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Problem (Playback)
Disc will not play.
Solution
– Insert the disc with the label facing up.
– The child lock is on. Read chapter “System Menu Options -
Access settings - Child lock” for details.
– Wrong region code. The DVD must be coded for ALL regions
or Region 2 in order to play on this recorder.
– There is no recording on the disc or wrong disc type. Read
chapter “Playback from Disc - Playable discs” for details.
– Make sure the disc is not scratched or warped. Clean the disc
or use a new one.
– Check if the disc is defective by trying another disc.
The picture is distorted or
black and white during
playback.
– The disc does not match with the TV colour system standard
(PAL/NTSC).
– The disc is dirty. Clean the disc.
– Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
There is picture or sound
interference with the TV
reception.
– Have your aerial or cable TV signal checked.
– Fine-tune your TV channel. Read chapter System Menu Options
- Analogue Channel settings - Fine Tuning” for details.
Distorted sound coming
from a connected hi-fi
amplifier.
– Do not connect any cables from this recorder to the ‘Phono’
input of your amplifier.
– If you are playing a DTS CD, you must use the COAXIAL or
OPTICAL-DIGITAL AUDIO OUTPUT socket of this recorder
to connect to the Hi-Fi system or amplifier.
– If a recording is too short, it is possible that a DVD player
cannot detect it. Observe the following ‘minimum recording
times’. Recording mode : {HQ} – 5 minutes, {SP}– 10 minutes,
{SPP} – 13 minutes, {LP} – 15 minutes, {EP} – 20 minutes, {SLP}
– 30 minutes, {SEP} - 30 minutes.
The recorded DVD cannot
be played back on another
DVD player.
– Some DVD players cannot play back DVD RW recordings.
You can solve this problem by using a special function :
1) Press OPEN/CLOSE on this recorder to open the disc tray.
2) Insert the disc but do not close the tray.
3) Hold down the number button {2} on the remote control
until the tray closes. The disc is modified.
4) If this fails to produce the desired result, repeat the
procedure using the number button {3} on the remote
control.
5) You can restore the disc to its original condition by pressing
and holding number button {1}.
Warning! There is a risk that you can no longer play the disc
on other DVD players after the following procedure. Therefore,
apply this function with particular care.
93
93
dvdr9000h_eu_eng2.indd 93
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Problem (Recording)
Solution
– Either no disc was inserted or the disc that was inserted cannot
be used for recordings. Insert a recordable DVD (DVD R,
DVD RW, or DVD+R Double Layer).
The message ‘Insert
recordable disc’ appears.
– The timer recording overlaps with another timer recording.
– If you ignore this warning, the programmed recording with the
earlier start time will start first.
The message ‘Collision’
appears.
– Change the information for one of the two recordings.
– Delete one of the two recordings
.– The TV channel you want to record is not stored or you
selected the wrong programme number. Check the TV channels
stored.
Recordings are not occurring
as scheduled. New
recordings cannot be made.
– You must reset the timer recording after adjusting the clock
setting.
– You cannot use the recorder to duplicate copyright material
(DVDs or videotapes) onto a recordable DVD, “COPY
PROTECTED” will be displayed.
The wrong TV channel was
decoded (recorded) after
you programmed a
recording using the
ShowView / VIDEO Plus+
system.
– ‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the
exact ‘VPS/PDC time’.
1) Enter the ShowView / VIDEO Plus+ PlusCode programming
number of the desired TV channel.
2) Press OK to confirm.
3) Check the channel number in the {Ch.} input field. If this does
not correspond to the desired TV channel, select this entry
field and change the channel number.
4) Press OK to confirm.
– You can finalise the disc using the following function:
1) Press OPEN CLOSE on this recorder to open the disc tray.
2) Insert the disc but do not close the tray.
3) Hold down button number {4} on the remote control until
the tray closes. ‘FINALIZING DISC’ appears on the display
panel.
The index screen flickers
when a DVD R is inserted.
4) If finalising has been successful, the Picture Index screen will
appear.
– This happens if you try to copy DVDs or video tapes that have
been copy-protected. Even though the picture on the TV is fine,
the recording on the recordable DVD is faulty. This
interference is unavoidable with copy-protected DVDs or video
tapes.
Picture is fuzzy and
brightness varies when
prerecorded video tapes.
– The recordable DVD has a limited recording lifetime, use a new
disc for recording.
94
94
dvdr9000h_eu_eng2.indd 94
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Problem (HDMI/EPG)
No HDMI audio output.
Solution
– You will not hear any sound from the HDMI output if the
source device is only DVI/HDCP-compatible.
– It is not possible to output SACD or copy-controlled DVD-
Audio sources from the HDMI connection.
– Make sure that you have activated this recorder as the HDMI
input in the settings for the device you are using. See HDMI
setting.
No HDMI video output.
– HDMI connection can only be made to HDMI-equipped devices
with HDCP (High Bandwidth Digital Content Protection). If you
wish to connect to a DVI connector (equipped with HDCP), you
will need a separate adaptor (DVI to HDMI).
– Make sure the resolution of this recorder matches the device
you have connected using the HDMI. See HDMI setting.
– To use the EPG, the analogue tuner has to be installed. Installing
only the digital tuner will result in no EPG service information.
EPG (GUIDE Plus+) data is
not available
95
dvdr9000h_eu_eng2.indd 95
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Disc types
Connectivity
•
•
Recording : DVD+R/-R, DVD+R Double layer,
DVD+RW/-RW
•
Rear Connections
–
–
–
–
–
RF antenna in
RF TV out
DVB in/out
Scart 1 (CVBS, S-Video/RGB out)
Scart 2 (CVBS, S-Video/RGB in, Decoder
in)
Playing: DVD-Video, MP3-CD, CD-R/CD-RW,
Video CD/SVCD, DVD+R/+RW, DVD-R/-RW,
Picture CD, Audio CD
Picture/Display
•
•
•
D/A Converter: 12 bit, 74.25 MHz
A/D Converter: 9 bit, 27 MHz
Picture enhancement: Progressive Scan, Pixel
Plus, Video Upscalling
–
Component Video out Progressive/
Interlaced
–
–
–
–
–
–
–
–
S-Video out
t
t
Video out (CVBS)
Audio left/right out
Digital audio out (coaxial)/optical
Digital audio in (coaxial)
HDMI out
Sound
•
•
•
•
•
•
•
•
D/A Converter: 24 bit, 96 MHz
A/D Converter: 24 bit, 96 MHz
Crosstalk (1 kHz): 100 dB
Dynamic range (1 kHz): 90 dB
Signal/noise ratio: 100
G-LINK (part of GUIDE Plus+)
Mains
•
•
Front Connections
Sound system: Dolby Digital, MPEG2
Distortion and Noise: 85 dB
Frequency response: 20 - 20 000 Hz
–
–
–
–
DV-input (i.LINK)
S-Video in
Video in (CVBS)
Audio left/right in
y
t
Video Recording
Recording system: PAL
Compression formats: MPEG2, MPEG1
Audio compression: Dolby Digital 2.0
•
•
•
Convenience
Programming/Timer enhancement:
–
–
–
–
–
–
–
Automatic Satellite recording
Mon~Fri/weekly repeat programme
Manual timer
Video Playback
Compression formats: MPEG2, MPEG1
Video disc playback system: NTSC, PAL
•
•
One Touch Recording
VPS/PDC recording control
ShowView / VIDEO Plus+
IR Set-Top-Box control
Audio Playback
•
•
Compression formats: Dolby Digital, MP3,
MPEG2 Multichannel, MPEG1, PCM
MP3 bit rates: 32-320 kbps and VBR
•
•
•
•
•
Programmable events: 25
Disc Library: Up to 9000 titles and 999 discs
Child protection: Child Lock
Clock: Smart Clock
Digital Content Management: Digital Photo
Manager
t
Storage Media
•
•
Hard Disk capacity: 400 GB
HDD recording enhancement: Time Shift
Buffer, Instant Replay
•
•
Ease of installation: Follow TV, Auto install
Electronic programming guide: GUIDE Plus+
Tuner/Reception/Transmission
TV system: PAL, SECAM
Aerial input: 75 Ohm coaxial (IEC75)
DVB: DVB Terrestrial
Power
•
•
•
•
•
•
Power supply: 198-276V, ~50 Hz
Power consumption: 51 W
Standby power consumption: < 5 W
Cabinet
w
•
•
Dimensions (WxHxD): 435 x 89 x 350 mm
Net Weight: 7.2 kg
Specification and design and subject to change
without notice.
96
dvdr9000h_eu_eng2.indd 96
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
JPEG: A very common digital still picture format.
A still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite of
its high compression ratio.
Analogue: Sound that has not been turned into
numbers. Analogue sound varies, while digital sound
has specific numerical values. These sockets send
audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image. The horizontal vs. vertical
ratio of conventional TVs is 4:3, and that of wide-
screens is 16:9.
MP3: A file format with a sound data compression
system. “MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By
using the MP3 format, one CD-R or CD-RW can
contain about 10 times more data then a regular
CD.
AUDIO OUT sockets: Red and white sockets on
the back of the system that send audio to another
system (TV, Stereo, etc.).
MPEG: Motion Picture Experts Group. A
collection of compression systems for digital audio
and video.
Chapter: Sections of a picture or a music piece on
a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
PBC: Playback Control. Refers to the signal
recorded on video CDs or SVCDs for controlling
playback. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can
enjoy interactive playback and searching.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL sockets. These sockets send audio
through multiple channels, instead of just two
channels as analogue does.
PCM: Pulse Code Modulation. A digital audio
encoding system.
Progressive Scan: The progressive scan displays
twice the number of frames per seconds than
ordinary TV system. It offers higher picture
resolution and quality.
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles,
etc recorded on a DVD.
Region code: A system allowing discs to be played
only in the region designated. This unit will only play
discs that have compatible region codes. You can
find the region code of your unit by looking on the
product label. Some discs are compatible with more
than one region (or ALL regions).
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, centre and subwoofer).
Finalise: A process that makes playback of a
recorded DVD R or CD-R possible on device that
can play such media. You can finalise DVD R on
this unit. After finalising, the disc becomes play only
and you can no longer record or edit on the disc.
S-Video: Produces a clear picture by sending
separate signals for the luminance and the colour.
You can use S-Video only if your TV has an S-Video
In socket.
Index Picture Screen: A screen that gives an
overview of a DVD RW or DVD R. An Index
Picture represents each recording.
Title: The longest section of a movie or music
feature on DVD. Each title is assigned a title
number, enabling you to locate the title you want.
HDD (Hard disk drive): This is a mass data
storage device used in computers, etc. Disks are
flat, circular, rigid plates coated with a thin magnetic
media. Magnetic heads record data on the rapidly
spinning disks. This facilitates the reading and
writing of large amounts of data at high speed.
VIDEO OUT socket: Yellow socket on the back
of the system that sends the DVD picture video to
a TV.
97
dvdr9000h_eu_eng2.indd 97
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Display panel symbols/messages
The following symbols/messages may
appear on your recorder display:
!SAT
ꢀ
The recorder is prepared for satellite
recording.
BLOCKED
ꢀ
The disc tray cannot be opened or closed due
to some mechanical obstruction.
CLOSING
Disc tray is closing.
ꢀ
ꢀ
COMPATIBLE
The recorder is busy making changes to make
the disc DVD-compatible.
00:00
ꢀ
Multifunction display/text line
COPY PROT
The DVD/video cassette you are trying to
copy is copy-protected.
ꢀ
ꢀ
–
–
–
–
–
–
–
–
Title/track number
Total/elapsed/remaining title/track time
Disc/title name
CREATE MENU
Error or warning messages
After the first recording has been successfully
complete on a new disc, the menu structure is
created.
Additional information regarding the disc
TV channel number or source of video
Clock (This is displayed in Standby mode).
TV programme title
DISC ERR
ꢀ
An error occurred when writing the title. If
this happens often, clean the disc or use a new
one.
¡
ꢀ
ꢀ
ꢀ
Tuner is selected as visible source.
Camara mode is the current active source.
Disc is the current active source.
DISC FULL
Disc is full. There is no storage space for new
recordings.
ꢀ
ꢀ
DISC UPDATE
–
Updating of disc is done after the editing is
complete.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
–
Entire disc is being erased.
Hard disk is the current active source.
DISC WARNING
ꢀ
ꢀ
DTV
An error occurred when writing the title. The
recording will continue, but the error will be
skipped.
Digital TV tuner is the current active source.
P SCAN
The video output is in progressive scan quality.
EMPTY DISC
Inserted disc is new or has been completely
erased (no recordings present).
Pixel Plus picture enhancement is turned on.
FREE TITLE
An empty title was selected.
ꢀ
ꢀ
D
Remote control command for the recorder
has been received.
EPG DOWNLOAD
Downloading of TV listing data is in progress.
XTIMER
A timer recording has been programmed or is
active.
ꢀ
98
dvdr9000h_eu_eng2.indd 98
2005-10-13 9:18:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Display panel symbols/messages (continued)
FINALIZING DISC
PHILIPS
The recorder has been turned on.
ꢀ
ꢀ
The DVD R disc is being finalised. The
progress bar on the LED shows the status of
the finalisation process.
PHOTO MMM/NNN
ꢀ
Number of the current photo (for Photo
mode). MMM represents the order of the
current photo, NNN represents the total
number of photos in the album. If the number
exceeds 999, ‘999’ will be displayed instead.
INFO DVD
Information on the inserted DVD is displayed
on the TV.
ꢀ
ꢀ
ꢀ
INSTALL
POST FORMAT
The disc is being prepared after the menu
structure has been created.
ꢀ
ꢀ
After the automatic channel search, the menu
for setting the time/date appears on the TV.
IS TV ON?
COPY PROTECTED
Title is copy-protected and cannot be
recorded.
The recorder is currently in the first
installation mode. Turn on your TV and read
the chapter ‘Installation and Set-up’ in the user
manual.
READING
Disc is being recognised by the recorder.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MAX CHAP
ꢀ
ꢀ
The maximum number of chapters per title
disc has been reached. The maximum number
of chapters per title is 99, and 255 per disc.
REC
A recording is currently in progress.
STANDBY
The recorder has been turned off.
MAX TITLE
The maximum number of titles has been
reached for the disc. Each disc can have a
maximum of 49 titles.
SYS MENU
The on-screen menu display is on.
UPDATING MENU
After a successful recording, the list of disc
contents is updated.
ꢀ
ꢀ
VCD
A VCD has been loaded into the recorder.
BUSY
NO DISC
Wait until this message disappears. The
recorder is busy processing an operation.
No disc has been inserted. If a disc has been
inserted, then it is possible that the disc cannot
be read.
NOSIGNAL
No signal or poor signal strength.
ꢀ
ꢀ
NTSC DISC
A disc with NTSC recordings has been
inserted and an attempt was made to record a
PAL signal. Insert a new disc or use a disc
containing PAL recordings.
OPENING
Disc tray is opening.
ꢀ
ꢀ
PAL DISC
A disc with PAL recordings has been inserted
and an attempt was made to record an NTSC
signal. Insert a new disc or use a disc
containing NTSC recordings.
99
dvdr9000h_eu_eng2.indd 99
2005-10-13 9:18:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|