Planet Technology Switch FSD 624SF User Manual

4-Port 100Base-FX + 2 Gigabit Web Smart Switch  
FSD-624SF  
Quick Installation Guide  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Installation Guide for FSD-624SF  
Start Web Management  
The PLANET FSD-624SF provides a built-in browser interface. You can  
manage the Switch remotely by having a remote host with Web browser,  
such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.  
The following shows how to startup the Web Management of the Switch,  
please note the Switch is configured through an Ethernet connection,  
make sure the manager PC must be set on the same IP subnet address,  
for example, the default IP address of the Switch is 192.168.0.100 (the  
factory-default IP address), then the manager PC should be set at  
192.168.0.x (where x is a number between 1 and 254, except 100), and  
the default subnet mask is 255.255.255.0.  
Use Internet Explorer 5.0 or above Web browser, enter default IP address  
To access the Web interface then the Web login screen appears in Figure 1  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Installation Guide for FSD-624SF  
Figure 1. Web Login Screen of FSD-624SF  
After entering the username and password (default user name and  
password is “admin”) in login screen (Figure 1 appears). The Web main  
screen appears as Figure 2.  
Figure 2. Web Main Screen of FSD-624SF  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Installation Guide for FSD-624SF  
Now, you can use the Web management interface to continue the Switch  
management, please refer to the user manual for more.  
#Notice:  
For security reason, please change and memorize the new password after  
this first setup.  
While IP Address be changed or forgotten admin  
password –  
To reset the IP address to the default IP Address “192.168.0.100” and  
the username /password to factory default mode (default user name and  
password is admin). Press the hardware reset button at the rear panel  
about 5 seconds. After the device is rebooted, you can login the  
management Web interface within the same subnet of 192.168.0.xx and  
default username / password.  
Hardware Reset  
Customer Support  
Thank you for purchase PLANET products. You can browse our online  
FAQ resource at the PLANET Website first to check if it could solve you  
issue. If you need more support information, please contact PLANET  
switch support team.  
PLANET online FAQ :  
Switch support team mail address :  
Copyright © PLANET Technology Corp. 2008.  
Contents subject to revision without prior notice.  
PLANET is a registered trademark of PLANET Technology Corp. All  
other trademarks belong to their respective owners.  
- 5 -  
2010-A33190-000  
CE  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentax Camcorder Optio 330 User Manual
Philips Battery Charger SJA1180 User Manual
Philips Cassette Player AQ6512 17Z User Manual
Philips Cassette Player D 1800 User Manual
Philips Flat Panel Television WAS6050 05 User Manual
Philips Headphones HE905 User Manual
Philips Indoor Furnishings 30188 11 16 User Manual
Philips MP3 Player 227E3Q User Manual
Pioneer Computer Drive DR914 User Manual
Pioneer Home Theater System PDP S62 User Manual