Philips DVD VCR Combo DVD755VR 00 User Manual

DVD-Video Player /Video Cassette Recorder

DVD755VR/00

Read this manual ﬁrst!

Congratulations on purchasing this Philips product.

We’ve included everything you need to get started.

If you have any problems, Philips representatives can

help you get the most from your new product by explaining:

• Hookups,

• First time setup, and

• Operation.

For fast help, call us ﬁrst!

Tel: see back page of this manual

Owner’s Manual

Manuel de l’utilisateur

Bedienungsanleitung

Gebruiksaanwijzingen

Manual del usuario

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

English ...................................................... 4

Français ....................................................39

Deutsch ....................................................75

Nederlands ............................................111

Español ..................................................147

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

G Title Menu ............................................................................27

G Disc Menu............................................................................27

G Camera Angle......................................................................27

G Changing the Audio Language ........................................27

G Changing the Audio Channel ..........................................27

G Subtitles................................................................................27

Operation with Audio and MP3 Disc ......................28-29

Playing an Audio CD and MP3 Disc ..................................28-29

G Notes on MP3 Recordings ..............................................28

G Pause ....................................................................................29

G Moving to another Track ..................................................29

G Repeat Track/All/Off ..........................................................29

G Search....................................................................................29

G Shuffle....................................................................................29

G Repeat A-B ..........................................................................29

G 3D Surround........................................................................29

G Changing the Audio Channel ..........................................29

Operation with JPEG Disc..............................................30

Viewing a JPEG disc ....................................................................30

G Moving to another File......................................................30

G Still Picture ..........................................................................30

G To flip the picture ..............................................................30

G To rotate Picture ................................................................30

G Notes on JPEG Recordings..............................................30

Programmed Playback....................................................31

Programmed Playback with Audio CD and MP3 Disc ........31

Programmed Playback withVideo CD ....................................31

G Repeat Programmed Tracks ............................................31

G Erasing a Track from Program list ..................................31

G Erasing the Complete Program list................................31

Additional Operation ................................................32-33

On Screen Display........................................................................32

Tape Counter Memory Stop ....................................................32

Child Lock......................................................................................32

Video Doctor (Self-Diagnosis) ..................................................32

Hi-Fi Stereo Sound System........................................................33

Wide Screen Compatibility 16:9 ..............................................33

To set the decoder ......................................................................33

Last Condition Memory..............................................................33

Special Recording............................................................34

Copying from DVD toVCR ......................................................34

Recording from another video recorder................................34

Introduction

Safety Precautions ............................................................2

Index ..................................................................................3

Before Use ......................................................................5-6

Playable Discs ..................................................................................5

Remote Control Operation Range ............................................5

Precautions ......................................................................................6

Notes on Discs ..............................................................................6

About Symbols ................................................................................6

Selecting theViewing Source........................................................6

Front Panel and Display Window ....................................7

Remote Control ................................................................8

Rear Panel ..........................................................................9

Preparation

Connections................................................................10-11

Connecting to a TV & Decoder................................................10

Connecting to Optional Equipment ........................................11

Before Operation -VCR part....................................12-16

Tuning in a video channel on your TV ....................................12

Using your DVD+VCR for the very first time......................12

Setting the clock Manually..........................................................13

To set the colour system............................................................13

How to using the main menu....................................................14

Tuning in TV stations Automatically ........................................14

Tuning in TV stations Manually..................................................15

Changing the other of TV stations ..........................................16

Deleting TV stations ....................................................................16

Before Operation - DVD part ..................................17-20

General Explanation ....................................................................17

On-Screen Display........................................................................17

Initial Settings ..........................................................................18-20

G General Operation ............................................................18

G Language ..............................................................................18

G Picture ..................................................................................18

G Sound ....................................................................................19

G Others ..................................................................................19

G Parental Control ................................................................20

Operation

Operation withTape ..................................................21-24

Playing a tape ................................................................................21

G OPR (Optimum Picture Response) ..............................21

Instant Timer Recording (ITR) ..................................................22

ShowView Programming ............................................................23

Timer recording using On Screen Display ............................24

Operation with DVD andVideo CD ........................25-27

Playing a DVD andVideo CD....................................................25

General Features ..........................................................................25

G Moving to another TITLE ................................................25

G Moving to another CHAPTER/TRACK........................25

G Search....................................................................................25

G Still Picture and Frame-by-Frame Playback..................25

G Slow Motion........................................................................26

G Shuffle....................................................................................26

G Repeat ..................................................................................26

G Repeat A-B ..........................................................................26

G Time Search ........................................................................26

G 3D Surround........................................................................26

G Screen Saver........................................................................26

G Zoom ....................................................................................27

G Marker Search ....................................................................27

Special DVD Features..................................................................27

Reference

Troubleshooting ..............................................................35

Language Code List ........................................................36

Country/Area Code list ..................................................37

Specification ....................................................................38

About the symbols for instructions

Indicates hazards likely to cause harm to the unit itself

or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Title (DVD only)

The main film content or accompanying feature content

or additional feature content, or music album. Each title is

assigned a title reference number enabling you to locate it

easily.

Playable Discs

DVD

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Audio CD

(8 cm / 12 cm disc)

Sections of a picture or a musical piece that are smaller

than titles.

A title is composed of one or several chapters. Each

chapter is assigned a chapter number, enable you to locate

the chapter you want. Depending on the disc, no chapters

may be recorded.

In addition, this unit can play a DVD-R, DVD RW,

Kodak PICTURE CD, SVCD, and CD-R or CD-RW

that contains audio titles, MP3 or JPEG files.

Track (Video CD and audio CD only)

Notes

Sections of a picture or a musical piece on a video CD or

an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

– Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD-R/ RW) disc itself,

some CD-R/RW (or DVD-R/ RW) discs cannot be played

on the unit.

Scene

– Do not attach any seal or label to either side (the labeled

side or the recorded side) of a disc.

– Do not use irregular shaped CDs (e.g., heart-shaped or

octagonal). It may result in malfunctions.

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into

sections called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling you to

locate the scene you want.

A scene is composed of one or several tracks.

Notes on DVDs andVideo CDs

Some playback operations of DVDs andVideo CDs may

be intentionally fixed by software manufacturers.As this

unit plays DVDs andVideo CDs according to disc content

features of the unit may not be available, or other

functions may be added.

Refer also to the instructions applied with the DVDs and

Video CDs. Some DVDs made for business purposes may

not be played on the unit.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures of

high resolution can be played if they are included in the

disc.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs allow

playback of video pictures as well as sound, but they are

not equipped with PBC.

Regional code of the DVD player and DVDs

This DVD player is designed and manufactured for

playback of region “2” encoded DVD software.

The region code on the labels of some DVD discs

indicates which type of player can play those

Remote Control Operation Range

Point the remote control at the remote sensor and press

the buttons.

G Distance:About 23 ft (7 m) from the front of the remote

sensor

discs.This unit can play only DVD discs labeled “2” or

“ALL”. If you try to play any other discs, the message

“Check Regional Code” will appear on the TV screen.

Some DVD discs may not have a region code label even

though their playback is prohibited by area limits.

G Angle: About 30° in each direction of the front of the

remote sensor

Remote control battery installation

Detach the battery cover on the rear of the

remote control, and insert two (size AA)

batteries with

and

aligned correctly.

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Cont’d)

Cleaning discs

Precautions

Fingerprints and dust on the disc can cause poor picture

quality and sound distortion. Before playing, clean the disc

with a clean cloth.Wipe the disc from the center out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials come in

handy. For maximum protection, re-pack the unit as it was

originally packed at the factory.

When setting the unit

The picture and sound of a nearby TV or radio may be

distorted during playback. In this case, position the unit

away from the TV or radio, or turn off the unit after

removing the disc.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static spray

intended for older vinyl records.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near

the unit. Do not leave rubber of plastic products in

contact with the unit for a long period of time.They will

leave marks on the surface.

About Symbols

About the

symbol display

Cleaning the unit

“

” may appear on the TV screen during operation.

To clean the cabinet

This icon means the function explained in this owner’s

manual is not permitted by the DVD+VCR or is not

available on that specific DVD video disc.

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents, such as alcohol,

benzine, or thinner, as these might damage the surface of

the unit.

About the disc symbols for instructions

A section whose title has one of the following symbol is

applicable only to the disc represented by the symbol.

To obtain a clear picture

The DVD player is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or worn

down, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

DVD

VCD2.0

Video CDs with the PBC (playback control)

function.

VCD1.1

Video CDs without the PBC (playback control)

For details, please contact your nearest dealer.

function.

Audio CDs.

Notes on Discs

MP3

MP3 disc.

Handling discs

JPEG

JPEG disc.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not get

on the surface.

Selecting theViewing Source

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

Do not stick paper or tape on the disc.

G If you want to view DVD deck output source:

Press DVD on the remote or SOURCE on the front panel

and output source of DVD deck is viewed on theTV screen.

G If you want to viewVCR deck output source:

PressVCR on the remote or SOURCE on the front panel

and output source ofVCR deck is viewed on the TV

screen.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sunlight,

as there may be a considerable temperature increase

inside the car.

Notes

G If you insert a disc while the DVD+VCR is in theVCR

mode, the DVD+VCR will switch to DVD mode

automatically.

G If you insert a cassette tape without prevention tab while

the DVD+VCR is in the DVD mode, the DVD+VCR will

switch toVCR mode automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel and Display Window

Display window

Shows the current status of the unit.

SOURCE

DVD/VCR Selector

Remote Sensor

Point the remote control here.

PAUSE( \ \ )

Pause palyback

DiscTray

Insert a disc here.

temporarily/ frame-

by-frame playback.

Tape Compartment

Audio IN

(L/R) Jacks

STOP ( x ) Stops playback.

Forward Skip/Scan/Fast-Forward

Go to NEXT chapter/track.Press and hold for

two seconds for a fast forward search.

Winds the tape forwards.

Video IN Jack

EJECT (

)

Tape Eject.

DVD toVCR copy

VCR Record

PLAY ( N ) Starts playback.

Reverse Skip/Scan, Rewind

Go to beginning of current chapter/track or to

PREVIOUS chapter/track. Press and hold for two

seconds for a fast reverse search.

Rewinds the tape.

DVD OPEN/CLOSE (

)

Opens or closes the disc tray.

POWER

Switches the unit to ON or OFF.

MP3 MP3 disc inserted.

ANGLE active.

PROG. Programmed playback active.

TITLE Indicates current title number.

CHP/TRK Indicates current chapter or track number.

VCR DVD+VCR functions are available and channels are selected

at DVD+VCR.

TIMER DVD+VCR is in timer recording or a timer

recording is programmed.

A y B

Indicates A-B repeat mode.

ALL

Indicates repeat all mode.

REC DVD+VCR is Recording.

Child Lock is engaged.

CDREC DVD toVCR copy is in progress.

HI-FI Indicates the unit is playing

back a tape recorded in Hi-Fi.

REC

HI-FI

PROG. TITLE CHP/TRK VCR TIMER

CDREC

ALL MP3

BIL PR

VCD

DVD

DVD DVD

inserted.

VCD Video CD

inserted

PR DVD+VCR is tuned to Channel XX.

BIL Indicates when a BILINGUAL broadcast is

being received.

SP LP

Displays the

recording and

CD Audio CD

inserted.

ST Indicates a stereo broadcast is being received.

Indicates total playing time, elapsed time, or current deck status

(Playback, Pause, etc).

playback speed.

A cassette is in theVCR deck.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

DVD/VCR select button

Select the output source (DVD orVCR) to

view on the TV screen.

POWER

Switches DVD+VCR ON and OFF.

EJECT, OPEN/CLOSE

TV/VCR

To view channels selected by theVCR tuner

or by the TV tuner.

Opens and closes the disc tray.

Ejects the tape in theVCR deck.

RETURN

Removes the setup menu.

0-9 numerical buttons

Selects numbered options in a menu.

POWER

DISPLAY

DISC MENU

Accesses menu on a DVD disc.

Accesses On-Screen display.

Switches among the clock, tape counter and

tape remaining modes.

TV/VCR

DVD

VCR OPEN/CLOSE

SYSTEM MENU

Accesses or removes DVD setup menu and

VCR menu.

EJECT

b/B/v/V (left/right/up/down)

- Selects an option in the menu

- v/V: Selects channel ofVCR.Adjusts

manually the tape’s picture onscreen.

SKIP ./REW

Skip to beginning of current chapter or

track, press twice in quick successions to go

to previous chapter or track.

Press and hold button for about two

seconds to search backward. (For DVD only)

Rewinds the tape during the STOP mode or

for fast reverse picture search.

RETURN

- Acknowledges menu selection.

- Displays functions on the TV screen.

DISPLAY

STOP

Stops playback.

DISC

SYSTEM

PLAY

Starts playback.

SKIP > /FWD

Skip to next chapter or track.

Press and hold button for about two

seconds to search forward.(For DVD only)

Advances the tape during the STOP mode or

for fast forward picture search.

PAUSE/STEP

Pause playback or recording

Press repeatedly for frame-by-frame playback

during pause.

PLAY

STOP

PAUSE/STEP

SUBTITLE

MARKER

Marks any point during playback.

Selects a subtitle language.

MARKER SEARCH INPUT REC/ITR

SUBTITLE AUDIO ANGLE ZOOM

AUDIO

Displays MARKER SEARCH menu.

Selects an audio language (DVD) or an audio

channel (CD).

INPUT

To select theVCR deck’s source

(Tuner,AV1,AV2 or AV3).

ANGLE

REPEAT REPEAT PROGRAM CLEAR

A-B

Selects a DVD camera angle if available.

ZOOM

REC/ITR

Records normally or activates Instant Timer

Recording with repeated presses.

TITLE SHUFFLE C.LOCK SHOW VIEW

Enlarges DVD/VCD video image.

VIDEO PLUS

TITLE/LP

- Displays the disc’s Title menu, if

available.

- Selects recording speed

REPEAT

Repeat chapter, track, title, all.

REPEAT A-B

Repeats sequence.

SHUFFLE

Plays tracks in random order.

PROGRAM

Accesses or removes Program menu.

C.LOCK

Switch the Child Lock on and off.

CLEAR

- Resets tape counter to M 0:00:00

- Removes a track number on the

program menu or a mark on the

MARKER SEARCH menu.

SHOWVIEW

To display the programme menu for

ShowView programming.

Note

This remote control use the same buttons forVCR and DVD

functions (ex. PLAY).

When using aVCR, first press theVCR button.

When using a DVD, first press the DVD button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

AERIAL

Connect the aerial using this jack.

EURO AV2 DECODER

Connect to pay-TV decoder or another video recorder.

DVD/VCR AUDIO OUT

Connect to an amplifier, receiver or stereo system.

AUDIO OUT (Left/Right) (DVD OUT)

Connect to an amplifier, receiver or stereo system.

DVD

EXCLUSIVE

OUT

VCR IN+OUT/DVD OUT

DVD/VCR

AUDIO OUT

AERIAL

AUDIO

OUT

EURO AV2

DECODER

EURO AV1

AUDIO/

VIDEO

RF OUT

DVD/VCR

OUT

COAXIAL

COAXIAL (Digital audio out jack) (DVD OUT)

Connect to digital (coaxial) audio equipment.

EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)

Connect to your TV set or another video recorder.

RF OUT (DVD/VCR OUT)

Connect to your TV using this jack.

Mains lead

Connect to a power

source.

Do not touch the inner pins of the jacks on the

rear panel. Electrostatic discharge may cause

permanent damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Tips

G Depending on your TV and other equipment you wish to

connect, there are various ways you could connect the

unit.

G Please refer to the manuals of your TV, Stereo System or

other devices as necessary to make the best connections.

G For better sound reproduction, connect this unit’s AUDIO

OUT jacks to the audio in jacks of your amplifier, receiver,

stereo or audio/video equipment. See “Connecting to

optional equipment” on page 11.

Caution

– Make sure this unit is connected directly to the TV. Set the

TV to the correct video input channel.

– Do not connect this unit’s AUDIO OUT jack to the

phono in jack (record deck) of your audio system.

Connecting to aTV & Decoder

G Make one of the following connections, depending on the

capabilities of your existing equipment.

Basic connection (AV)

Connect the EURO AV1 AUDIO/VIDEO on the rear

panel of this unit to the SCART input socket on the TV

using a SCART lead.

Some TV broadcasters transmit encoded television signals

2 _{which you can only see with a purchased or rented}

decoder.You can connect such a decoder (descrambler) to

the DVD+VCR.

Basic connection (RF)

DVD

EXCLUSIVE

OUT

VCR IN+OUT/DVD OUT

DVD/VCR

AUDIO OUT

AERIAL

AUDIO

OUT

Connect the RF antenna cable from your indoor/ outdoor

EURO AV2

DECODER

antenna to AERIAL jack on the rear panel of this unit.

EURO AV1

AUDIO/

VIDEO

RF OUT

Connect the supplied RF antenna cable from the RF OUT

2 _{(DVD/VCR OUT) jack on the rear panel of this unit to}

your television’s Antenna Input.

DVD/VCR

OUT

COAXIAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Cont’d)

Connecting to Optional

Equipment

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic II/Pro

Logic

Notes

– If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– To see the audio format of the current DVD in the

On-Screen Display, press AUDIO.

Connect the Left and Right DVD/VCR AUDIO OUT or

AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this

unit to the audio left and right in jacks on your amplifier,

receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/Video

receiver equipped with a multi-channel decoder

(Dolby Digital™, MPEG 2 or DTS)

Connect one of this unit’s DIGITAL AUDIO OUT jack

(COAXIAL) to the corresponding in jack on your

DVD

VCR IN+OUT/DVD OUT

DVD/VCR

AUDIO OUT

EXCLUSIVE

OUT

AERIAL

AUDIO

OUT

EURO AV2

DECODER

amplifier. Use an optional digital (coaxial) audio cable.

EURO AV1

AUDIO/

RF OUT

VIDEO

You will need to activate this unit’s digital output. (See

DVD/VCR

OUT

2 _{“Digital Audio Output” on page 19).}

COAXIAL

2 channel analog stereo or Dolby Pro Logic ll / Pro Logic connection.

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your unit (MPEG 2, Dolby

Digital and DTS). Check the receiver manual and the logos

on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation -VCR part

Using your DVD+VCR for the very first time

Tuning in a video channel on your

Video channel (RF output channel) is the channel on

which your TV receives picture and sound signals from the

DVD+VCR through the RF cable.

For the following steps we assume that you have just

connected your DVD+VCR for the very first time.

To make tuning TV stations an easy task your DVD+VCR

incorporates the Automatic Channel Memory System

(ACMS).This system will automatically tune and store TV

channels in your DVD+VCR.

If you have used a SCART lead you will not have to tune

yourTV, simply select the AV channel.The AV channel is

already pre-tuned for optimum video playback on yourTV.

Make sure that you have correctly installed your

DVD+VCR.

Press 1 to turn on your DVD+VCR.

If the initial Menu Screen doesn’t appear on screen, make

sure that you have tuned your TV to a video channel. Or if

this is correct it may mean that your DVD+VCR is already

tuned.

Perform the following steps only if interference appears in

the TV picture after you have moved to a different area or

a new station has started broadcasting in your area, or if

you change the connection from RF connection to AV

connection, or vise versa.

Turn on DVD+VCR andTV.

SF ANDERE

Set the vacant position 36 on yourTV.

Pr-12

ACMS

Press 1on the remote control to enter the standby

mode (the clock indicator will be dimmed).

Press b or B to select the desired country.

(A:Austria, B: Belgium,CH: Switzerland, D: Germany, DK:

Denmark, E: Spain, F: France, I: Italy, N: Norway, NL:

Netherlands, P: Portugal, S:Sweden, SF: Finland,ANDERE:

Others.)

Press and hold REW or FWD on the

DVD+VCR for more than 4 secs.

RF 36 will appear in the DVD+VCR display.

The following picture will be displayed on the TV screen.

Press OK to start the automatic tuning process.

C02

C03

C04

PR-01

PR-02

PR-03

RF KANAL

SET

Pr-12

ACMS

If the picture is snowy, move to step 5. If the picture is

clean, press 1 on the DVD+VCR to finish.

Press SYSTEM MENU to remove the menus from

theTV screen.

Press REW or FWD on the DVD+VCR to set the

video channel to a vacant position between 22 and

68 which is not occupied by any local station in your

area.

Note

The RF channel will not change until step 6 has been

executed.

Press

to store the new RF video channel into the

DVD+VCR memory.

Now tune yourTV set to the new DVD+VCR RF

channel.

Note

If the TV picture was clear in step 4, do not retune your

TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation -VCR part

To set the colour system

Setting the clock Manually

The clock in your DVD+VCR controls time and date

settings for your DVD+VCR.

Press SYSTEM MENU.

The main menu will appear on the TV screen.

Press SYSTEM MENU.

Press b or B to select TIME DATE.

Press OK.

Press 1 or 2 to select the SYSTEM and press OK.

Press 3 or 4 to select according to the COLOUR

4 _{system used.}

HH MN DD MM YY

- - - - -

- -

TIME

DATE

Use the numbered buttons on the remote control to

2 _{alter the HOURS, MINUTES, DAY, MONTH and}

YEAR.

VCR

A B

Pr-12

AUTO

SYS-

TEM

TIME

SET

REC

AUDIO

ACMS

Dr.

DATE

OSD

SYS-

TEM

PAL

NIC

OS^DSECAM

ON 16:9 DECO-

OPR

OFF 4:3

DER

Please note your DVD+VCR uses a 24 hour clock. e.g.

1pm will be displayed as 13:00.

Press SYSTEM MENU to remove the menus from the

The day of the week will appear automatically when you

enter the year.

5 _{TV screen.}

HH MN DD MM YY

03 WED

TIME

DATE

If you make a mistake press b or B and enter the

3 _{correct details.}

Press SYSTEM MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation -VCR part

How to using the main menu

ThisVCR can easily be programmed by using the menus

displayed on screen.

Tuning inTV Stations

Automatically

If the TV broadcast signal is weak yourVCR may not

detect the necessary information and will be and to store

them correctly.To overcome this problem please turn to

the MANUAL TUNING section on page 15.

The menus are controlled from the Remote Control

Handset.

Switch on yourTV set and video recorder by pressing the

1 button.

Press 1 to turn on yourVCR.

Press SYSTEM MENU button.

2 _{The main menu will appear on the TV screen.}

Press SYSTEM MENU button.

2 _{The main menu will appear on the TV screen.}

Press 1 or 2 to select the ACMS.

Press OK.

VCR

A B

Pr-12

TIME SYS-

SET

REC

AUDIO

ACMS

OSD Dr.

DATE

TEM

REC

NIC

OSD

OFF 4:3

16:9 DECO-

DER

OPR

VCR

A B

Pr-12

TIME

SYS-

TEM

SET

REC

AUDIO

ACMS

OSD

Dr.

DATE

Pr-12

NIC

ACMS

OSD

OFF

DECO-

DER

16:9

4:3

G REC - Timer recording setting (see p. 24).

G PR SET - Manual tuning setting (see p. 15).

G ACMS - ACMS (Automatic Channel Memory System)

(see p. 14).

OPR

G TIME DATE - Date & clock setting (see p. 13).

G SYSTEM - To set the Colour TV System (see p. 13).

G ABC OSD - To change the language setting for OSD.

You can select the language among

SF OTHERS

Pr-12

ACMS

English, Deutsch, Français, Italiano,

Español, Nederlands and Portuguese.

Press 1 or 2 to select COUNTRY.

G Dr. - To check a problem with yourVCR (see p. 32).

G AUDIO - To select the channel for audio output.

G F.OSD ON/OFF - To display the operational

mode of yourVCR (see p. 32).

G 16:9/4:3 - To select the aspect ratio of your TV

(see p.33).

3 _{(A:Austria, B:Belgium, CH:Switzerland, D:Germany,}

DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,

NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland,

OTHERS)

Press OK again to start the automatic tuning process.

G DECODER - To use a pay-TV decoder (or Satellite)

with yourVCR (see p.33).

G OPR - To improve the playback picture (see p. 21).

G NIC - To activate or deactivate the NICAM digital

sound (see p. 33).

C02

C03

C04

PR-01

PR-02

PR-03

Pr-12

ACMS

Press 1 and 2 to select the desired menu.

3 _{Press OK and use 3 or 4 to select.}

The TV STATIONTABLE will appear when tuning is

Press SYSTEM MENU to return to a TV picture.

4 _complete.

Press SYSTEM MENU to save your settings.

C02

C03

C04

C05

C06

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

MOVE:

DELETE:

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation -VCR part

Press 2 to select STATION so that you may name

5 _{your TV station.}

Tuning inTV Stations Manually

In certain areas of the country broadcast signals may be

too weak for yourVCR’s automatic tuning process to find

or assign TV stations correctly.

You must tune in these weaker broadcast stations

manually in order for yourVCR to store them.

Press OK.

The TV station name list will appear.

ARD

ZDF

WDR 3

BR3

HR3

N 3

C10

MFT

NDR3

SWF3

Press SYSTEM MENU.

The main menu will appear on the TV screen. Press 1 or

SET

2 to select the PR SET.

Press OK.

Use D or E to select a station name from the list.

6 _{Press OK to select it.}

If your station name isn’t on the list do not press

OK, but go to stage 7.

C 02

MFT

STATION

PR-01

ARD

ZDF

WDR 3

BR3

VCR

A B

Pr-12

TIME SYS-

SET

REC

AUDIO

ACMS

OSD

Dr.

DATE

TEM

SET

CHANNEL/CABLE : AV

NIC

OSD

ON 16:9

DECO-

DER

SET

OPR

OFF 4:3

HR3

N 3

C10

MFT

NDR3

SWF3

Press SYSTEM MENU.

2 _{The station table will appear.}

SET

Press 3 or 4 to select the programme number that you

want to tune (for example, PR 09).

You can change a TV station name manually rather than

using the “standard” names.

Press ^G.

C02

C03

C04

C05

C06

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

Use 3 or 4 to select letters and numbers for the

new station name.

Use 1 or 2 to move back and forth between

characters.

Press OK.

MOVE :

DELETE :

SET

Press OK.

C09

C10

MFT

STATION

WDR 3

3 _{Press INPUT to select C (Standard stations) or S}

(Cable stations): C02 - C69, S01 - S41.

Enter the channel number of station that you want to

tune with the numbered buttons or use 3 or 4 to

find the required station.

SET

Press SYSTEM MENU, confirm the station placement.

8 _{Press SYSTEM MENU again.}

Your new TV station has now been tuned into yourVCR.

If you wish to manually tune other stations repeat stages

1 - 8.

C - -

MFT

- -

STATION

- - - -

CHANNEL/CABLE : AV

SET

C10

WDR 3

- -

- - - - -

Searching will stop when it locates a stations.

4 _{Press 2 to select MFT.}

MOVE :

DELETE :

Control the fine tuning of the station by using 3 or 4.

SET

C10

MFT

STATION

- - - -

CHANNEL/CABLE : AV

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation -VCR part

Changing the order ofTV Stations DeletingTV Stations

After tuning TV stations into yourVCR you may wish to

change the order in which they are stored without having

to retune them again.The instructions given on this page

will show you how you can simply move them into your

After tuning TV stations into yourVCR you may wish to

delete a station.

The instructions given on this page will show you how you

can easily delete any unwanted TV stations.

1^{desired order.}

Press SYSTEM MENU.

The main menu will appear on the TV screen.

Press 1 or 2 to select the PR SET.

Press OK.

The main menu will appear on the TV screen.

Use 1 or 2 to select the PR SET.

Press OK.

VCR

A B

VCR

Pr-12

A B

TIME SYS-

Pr-12

SET

REC

AUDIO

ACMS

OSD

Dr.

SET

TIME SYS-

DATE

TEM

REC

AUDIO

ACMS

OSD

Dr.

DATE

SET

TEM

NIC

OSD

OFF

SET

NIC

OSD

OFF

16:9

4:3

DECO-

DER

16:9

4:3

OPR

DECO-

DER

OPR

C 02

MFT

STATION

PR-01

C 02

MFT

STATION

PR-01

CHANNEL/CABLE : AV

SET

Press SYSTEM MENU.

Use 3 or 4 to select the programme number you

want to move (for example, PR 03).

Press 2.

Press 3 or 4 to select the programme number you

want to delete. (for example, PR 03)

C02

C03

C05

C06

C04

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

C02

C03

C04

C05

C06

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

MOVE :

DELETE :

MOVE:

SET

DELETE:

Press 1.

C02

PR-01

PR-02

PR-03

After a short while, the selected station will be

deleted.

C03

C04

C05

PR-04

PR-05

PR-06

PR-07

PR-08

C06

C07

C08

C09

C02

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

C03

C05

C06

C04

C07

SET

C08

C09

PR-07

PR-08

Use 3 or 4 to select the programme number you

want to move to (for example, PR 05).

MOVE :

DELETE :

SET

C02

C03

C05

C06

C04

C07

C08

C09

PR-01

PR-02

PR-04

PR-05

PR-03

Press SYSTEM MENU to remove the menus from the

TV screen.

If you wish to delete other TV stations repeat stages 1 -

PR-06

PR-07

PR-08

SET

How to select StoredTV stations:

Stored TV stations can be selected in either of two ways.

Use 3 or 4 to select different stations that are tuned into

your DVD+VCR.

Press OK.

The selected programme will be moved to the new

programme number.

You may also directly select stations using the

numbered buttons on the remote control.

If you wish to move otherTV stations repeat stages 1 - 4.

Press SYSTEM MENU to remove the menus from the

TV screen.

C02

C03

C05

C06

C04

PR-01

PR-02

PR-03

PR-04

PR-05

C07

C08

C09

PR-06

PR-07

PR-08

MOVE :

DELETE :

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD part

Temporary Feedback Field Icons

General Explanation

This manual gives the basic instructions for operating the

DVD+VCR. Some DVDs require specific operation or

allow only limited operation during playback.When this

TITLE

RepeatTitle

CHAPT

Repeat Chapter

TRACK

RepeatTrack (non-PBCVideo CDs and

Audio CD only)

occurs, the symbol

that the operation is not permitted by the DVD+VCR or

is not available on the disc.

appears on the TV screen, indicating

ALL

Repeat Disc (non-PBCVideo CDs and Audio

CD only)

On-Screen Display

Repeat A-B

The general playback status can be displayed on the TV

screen. Some options can be changed on the menu.

OFF

Repeat Off

On-screen display operation

Resume play from this point

Action prohibited or not available

Press DISPLAY during playback.

Use v/V to select an item.

2 _{The selected option will be highlighted.}

Notes

G Some discs may not provide all of the features on the on-

screen display example shown below.

G If no button is pressed for 10 seconds, the on-screen

display disappears.

Use b/B to change the setting of an item.

3 _{The number buttons can also be used for setting}

numbers (e.g., title number). For some functions, press

OK to execute the setting.

DVD

Options

Selection Method

Function (Use v/V to select desired option)

b/B, or

Numeric, OK

Shows the current title number and total number of

titles, and skips to the desired title number.

Title Number

Chapter Number

Time search

1 /3

1 /12

b/B, or

Numeric, OK

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

Numeric, OK

0:20:09

Audio language

and Digital Audio

Output mode

1 ENG

5.1 CH

b/B, or AUDIO

Shows the current subtitles language, and

changes the setting.

b/B, SUBTITLE

ABC

Subtitle language

Angle

OFF

1 /1

Shows the current angle number and total number of

angles, and changes the angle number.

b/B,ANGLE

Shows the current sound mode, and

changes the setting.

Sound

b/B

NORM.

VCD1.1

VCD2.0

Items

Selection Method

Function (Use v/V to select desired option)

B, or

Shows the current track number, total number of tracks

and PBC On mode, and skips to the desired track number.

Track Number

Time

1 /4

Numbers, OK

0:20:09

Shows the elapsed playing time (Display only)

–

Shows the audio channel, and

changes the audio channel.

Audio Channel

Sound

B, or AUDIO

STER.

Shows the current sound mode, and

any changes to the setting.

b / B

NORM.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Menu Language

Select a language for the setup menu.This is the menu you

see when you press SYSTEM MENU.

Initial Settings

You can set your own Personal Preferences on the

player.

English

Spanish

French

German

Italian

Disc Audio

Disc Subtitle

Disc Menu

Rating

General Operation

Press SYSTEM MENU.

Country Code

TV Aspect

The setup menu appears.

Portuguese

Dutch

Menu Language

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

Digital Audio Output

Others

Rating

German

Spanish

Italian

Country Code

TV Aspect

Menu Language

Chinese

Polish

Picture

Digital Audio Output

Others

Hungarian

Other – – – –

DVD

TV Aspect

4:3 Letterbox: Select when a standard 4:3 TV is

connected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a conventional TV set is

connected.The video material formatted in the Pan & Scan

style is played back in that style (Both sides of the picture

are cut off.)

Use v/V to select the desired item.

2 _{The screen will show the current setting for the selected}

option, as well as alternate setting(s).

While the desired option is selected, press B,

3 _{then v/V to select the desired setting.}

16:9 Wide: Select when a 16:9 wide TV is connected.

Press OK to confirm your selection.

4 _{Some items require additional steps.}

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Press SYSTEM MENU, RETURN, or PLAY N to

5 _{exit the setup menu.}

Rating

Country Code

TV Aspect

Menu Language

Language

Digital Audio Output

Others

DVD

Disc Language

Select a language for the disc’s Menu,Audio, and Subtitle.

Original :The original language set for the disc is

selected.

Other :To select another language, press number buttons

to enter the corresponding 4-digit number according to

the language code list on page 36. If you enter the wrong

language code, press CLEAR.

Notes

Disc Language selection may not work for some DVDs.

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

German

Spanish

Italian

Country Code

TV Aspect

Menu Language

Chinese

Polish

Digital Audio Output

Others

Hungarian

Other – – – –

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Sound

Others

The DRC,Vocal, PBC and Auto Play settings can be

changed.

Digital Audio Output

Each DVD disc has a variety of audio output options. Set

the DVD+VCR’s Digital Audio Output according to the

type of audio system you use.

G Use v/V to select the desired item and press OK.The

setting of the selected item alternates between On and

Off.

DRC On

Disc Audio

Disc Subtitle

Disc Menu

DOLBY DIGITAL/PCM:

Vocal On

PBC On

Select DOLBY DIGITAL/PCM if you connected the

DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby

Digital decoder (or an amplifier or other equipment with

a Dolby Digital decoder).

Auto Play Off

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Stream/PCM:

Select Stream/PCM if you connected the DVD+VCR’s

DIGITAL AUDIO OUT jack to an amplifier or other

equipment with a DTS decoder, Dolby Digital decoder or

MPEG decoder.

Dynamic Range Control (DRC)

With the DVD format, you can hear a program’s

soundtrack in the most accurate and realistic presentation

possible, thanks to digital audio technology. However, you

may wish to compress the dynamic range of the audio

output (the difference between the loudest sounds and

the quietest ones).Then, you may listen to a movie at a

lower volume without losing clarity of sound. Set DRC to

On for this effect.

PCM: Select when connected to a 2 channel digital stereo

amplifier.The DVD+VCR output sounds in the PCM 2ch

format when you play a DVD video disc recorded on the

Dolby Digital, MPEG1, or MPEG2 recording system.

DOLBY

_DIGITAL/PCM

Stream/PCM

PCM

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Sample Freq.

48 KHz

Vocal

SetVocal to On only when a multi-channel karaoke DVD

is playing.The karaoke channels on the disc will mix into

normal stereo sound.

Menu Language

96KHz

Digital Audio Output

Others

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the

PBC.

Off: Video CDs with PBC are played the same way as

Audio CDs.

Sample Frequency

To change the Sample Frequency setting, first select the

desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz.When this choice is made,

this unit will automatically convert any 96KHz signals to

48KHz so your system can decode them.

If your receiver or amplifier is capable of handling 96KHz

signals, select 96KHz.When this choice is made, this unit

will pass each type of signal through without any further

processing.

DVD

Auto Play

You can set up the DVD Player so a DVD disc

automatically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will search

a title that playback time is long most and then play back

the title automatically.

On: Auto Play function is activated.

Off: Auto Play function is not activated.

Note

The Auto Play function may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Parental Control

Area Code

DVD

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list (See

“Country/Area Code List”, page 37).

Rating

Movies on DVDs may contain scenes not suitable for

children.Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc.These scenes are rated from 1

to 8, and alternatively, more suitable scenes are available

for selection on some discs. Ratings are

country dependent.The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Code Set

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Disc Audio

Disc Subtitle

Disc Menu

Rating

Select Country Code using the v/V buttons on

the setup menu.

Country Code

TV Aspect

Menu Language

While Country Code is selected, press B.

Digital Audio Output

Others

Unlock

Change

Follow step 3 of “Rating” on left.

Select the first character using the v/V buttons.

Shift the cursor using 2 button and select the

Select “Rating” on the Setup menu using the

v/V buttons.

While “Rating” is selected, press B.

5 _{second character using v/V buttons.}

Press OK to confirm your Area code

6 _{selection, then press SYSTEM MENU to exit the}

menu.

When you have not entered a password yet.

3 _{Enter a 4-digit password using the numbered buttons to}

create a personal 4-digit security password, then press

OK. Enter the 4-digit password again and press OK to

verify.

Note

Confirmation of the 4-digit password is necessary when

the password is changed (see “Changing the 4-digit Code”

below ).

When you have already entered a password;

Enter a 4-digit password using the numerical buttons to

confirm the personal 4-digit security password, then

press OK.

Changing the 4-digit Code

If you make a mistake before pressing OK, press CLEAR

and enter 4-digit security password again.

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old password, then press OK.

3 Select Change using v/V buttons then press OK.

4 Enter the new 4-digit password, then press OK.

5 Enter exactly the same password a second time and verify

by pressing OK.

Select a rating from 1 to 8 using v/V buttons.

4 _{Level 1 : DVD software for adults cannot be}

played back.

Level 8 :All DVD software can be played back.

The limitation will be more severe as the level

number is lower.

6 Press SYSTEM MENU to exit the menu.

Unlock: If you select Unlock, Parental Control is not

active.The disc will play in full.

If you forget your 4-digit Code

If you forget your password, clear the current password

by following the procedure below.

1 Press SYSTEM MENU to display the setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

Ratings 1 to 8: Some discs contain scenes not suitable

for children. If you set a rating for the DVD+VCR, all disc

scenes with the same rating or lower will be played.

Higher rated scenes will not be played unless an

alternative scene is available on the disc.The alternative

must have the same rating or a lower one. If no suitable

alternative is found, playback will stop.You must enter the

4-digit password or change the rating level in order to

play the disc.

The 4-digit password is cleared.

3 Enter a new password as shown above to the left (Rating).

Press OK to confirm your rating selection, then

5 _{press SYSTEM MENU to exit the menu.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Slow motion playback, Shuttle :

Playing a tape

5 _{During playing back or still picture press b or B.}

You can reach the following playback speeds. (-7xplay, -

3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay)

To switch off the slow motion and shuttle, press the

desired function.

You will only be able to load and eject video cassettes

when yourVCR is plugged into the mains.

YourVCR may also playback recordings from NTSC tapes

(on PAL TV).

Getting a better picture

During slow motion and shuttle, the noise bars may

appear on the picture according to the status of tape.

If distortions can be seen in the picture, reduce them

with v or V.

When a cassette is inserted and playback started, the

automatic tracking function works to get the best possible

picture automatically. If the quality of the recording is

poor, repeatedly press v or V on the remote control to

manually adjust the tracking until any distortions have

been removed.

Press STOP to end playback.

6 _{Press EJECT.}

If the end of the tape is reached, your DVD+VCR will

stop playback automatically, rewind, stop, eject the tape.

Press numbered 0 on the remote control to switch

automatic tracking back on again.

OPR (Optimum Picture Response)

This feature automatically improves playback picture

quality by adjusting your DVD+VCR to the condition of

the tape.

Make sure that you have correctly connected yourVCR

as described earlier in this book.

Turn on your TV.

Press 1 to turn on your DVD+VCR.

Insert the video cassette into your DVD+VCR.

The video cassette should have the window side facing

up and the arrow facing away from you.

Press SYSTEM MENU.

Press PLAY N to start playing your tape.

2 _{If you load a video cassette which has had its record}

protection tab removed, playback of the cassette will

start automatically.

VCR

A B

OFF

Pr-12

SYS-

TEM

TIME

SET

REC

ACMS

SOFT

OSD

Dr.

DATE

NIC

SHARP

OPR

OSD

OFF 4:3

AUTOTRACKING

16:9 DECO-

DER

AUDIO

OPR

Your DVD+VCR will automatically adjust the tracking to

give the best picture quality.

Press v or V to select OPR.

Press PAUSE/STEP

3 _{Press PAUSE/STEP}

frame by frame.

to still a picture.

repeatedly to advance the tape

Press OK.

If you hold down >, the picture will be slowed down

at about 1/19 times the normal playback.

Tapes can be paused for up to 5 minutes.After 5

minutes your DVD+VCR will stop the tape to prevent

damaging the tape or your DVD+VCR .

Still picture quality can be improved slightly by using v

or V.

Press 3 or 4repeatedly to select: OFF, SOFT or

4 _SHARP.

Please note you may only set OPR when

playing a tape.

Press SYSTEM MENU return to screen.

Press PLAY N to continue playing your tape.

Picture search:

During playing back press either . or > to this will

enable you to rapidly wind the tape (7 times normal

playback) see where you are on the tape.

Logic search:

During fast forwarding or rewinding press and hold .

or > the picture will be played back at 7 times normal

playback speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

InstantTimer Recording (ITR)

YourVCR allows you to make recordings using a variety

of simple methods:

InstantTimer Recording (ITR) start recording

immediately for a set period of time or until the video

cassette runs out.

Press LP if you wish to record in Long Play or Standard

5 _Play.

SP will produce improved picture and sound quality,

however LP will provide twice as much recording time

as SP.

Press REC/ITR on the remote to start recording.

6 _{RECORD will appear on the TV screen.}

Press RECORD on your unit or press REC/ITR on

the remote several times. Each successive press will

increase the record time by 30 minutes until you reach

a maximum of 9 hours.

Your DVD+VCR incorporates Long Play (LP) which

enables you to record up to twice the amount of time on

a video cassette. For example an E-180 will record up to

180 minutes using Standard Play (SP); using LP you will be

able to record up to 360 minutes. Please note there will

be a slight loss in picture and sound quality when using LP.

Press PAUSE/STEP

scenes.

to avoid recording unwanted

Make sure that you have correctly connected yourVCR

Press PAUSE/STEP

to continue recording.

as described earlier in this book.

Press 1 to turn on yourVCR.

If you press PAUSE/STEP

during ITR, the DVD/VCR

will enter the record pause mode and ITR is cancelled.

Tapes can be paused for up to 5 minutes; RECP will be

displayed when a tape is paused.After 5 minutes your

DVD+VCR will stop recording to

prevent damaging the tape or your DVD+VCR.

Press STOP twice within 5 seconds to end

Insert a video cassette with protection tab into your

2 _VCR.

The video cassette should have the window side facing

up and the arrow facing away from you.

8 _recording.

Press v or V to select the programme number you

3 _{wish to record.}

EJECT will appear on the TV screen for a few

seconds.

You may also directly select programme number using

the numbered buttons on the remote control.

Notes

If you wish to record directly from the SCART or RCA

4 _{sockets repeatedly press INPUT until the socket you}

wish to record from is displayed.

G If you do not wish to record on a tape (this can

happen quite easily by accident!) remove the

protection tab on the back edge of the video cassette.

G It is possible to record on a video cassette with the

record protection tab removed by covering the hole with

self adhesive tape.

G Remember you can record one programme while

watching another by starting your instant recording, press

TV/VCR to disappear VCR indicator in the

display window and then selecting a different channel on

your TV.

AV 1 for recording from EURO AV1 SCART socket on

the rear of your unit.

AV 2 for recording from EURO AV2 SCART socket on

the rear of your unit.

AV 3 for recording fromVIDEO IN and AUDIO IN

(Left & Right) sockets on the front of your unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Press F or G to select the settings that you wish to

6 _{revise. (PR, DATE,TIME and SP).}

ShowView Programming

ShowView greatly simplifies entering the date, channel,

start and end times of a Timer Recording by simply

entering a ShowView Code. ShowView Codes are

published in most TV guide magazines; they can vary one

to nine numbers in length.

Press ^Dor E to enter the correct information.

DATE

TIME

PR-01 12

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

SHOWVIEW is a registered trademark of Gemstar

Development Corporation.

The SHOWVIEW system is manufactured under licence

from Gemstar Development Corporation.

Press G to select the recording speed.

Press ^Dor E to select the desired tape speed (SP, IP, or

LP).

IP mode determines how much tape is left and switches

speed from SP to LP, if necessary, to complete recording

the program.

Check that the timer event details are correct.

If you wish to record from AUDIO IN andVIDEO IN on

the front or from either of the EURO SCART sockets on

the back ofVCR, press INPUT to select for correct

display (AV1,AV2 or AV3).

Make sure that TV channels have been tuned and stored

in correct SHOWVIEW order.

Insert a video cassette with protection tab into your

VCR.

Press SHOWVIEW.

- - - - - - - - -

PR-01 12

DATE

TIME

ONCE

REC SHOWVIEW

0~9,

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Press D or E to select the recording type.

ONCE:To record once.

WEEKLY:To record at the same time every week.

DAILY:To record every day (except Saturday and

Sunday) at the same time.

If you want to make another ShowView recording

8 _{repeat stages 2 - 7.}

Press the numbered buttons to enter the

ShowView Code of the TV programme that you wish

to record.

If you make a mistake press F then enter the revised

number.

Press SYSTEM MENU twice.

If PLEASE CHECK is displayed, you have entered

incorrect information and will need to re-enter the data.

Press 1 to switch yourVCR power off mode.

TIMER will appear in the video recorder’s display while

yourVCR waits to make the recording.

To watch a DVD during timer recording standby mode,

press POWER and DVD to switch to DVD mode.

246876543

ONCE

SHOWVIEW

0~9,

REC

Press OK.

If PLEASE CHECK is displayed it means that you have

entered the wrong ShowView number, entered the

ShowView number incorrectly.

If “- -” is displayed, you have to enter the programme

number of the station, you want to record from.

DATE

TIME

PR-01

- -

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Press the numbered buttons to enter the recording

start and end times of the programme that you wish to

record.

Timer recording using On Screen

Display

You may set up to seven timer record events within one

month of the current date.

Please note your DVD+VCR uses a 24 hour clock. e.g.

1pm will be displayed as 13:00.

You may also select the start and end times by using v or

PR-01

- -

DATE

- -

Note

19:00~ 20:00

- -: - -~ - -: - -

- -: - -~- - : - -

Before setting the timer make sure that you have set the

DVD+VCR clock correctly and you know which stations

you have tuned TV stations on your DVD+VCR.

Insert a video cassette with protection tab into your

DVD+VCR.

Press B to select the recording speed.

Press v or V to select the desired tape speed

(SP, IP, or LP).

IP mode determines how much tape is left and switches

speed from SP to LP, if necessary, to

complete recording the program.

The video cassette should have the window side facing

up and the arrow facing away from you.

Press SYSTEM MENU.

Press 1 or 2 to select REC.

Press OK.

Press OK to start setting the timer record event.

DATE

- -

If all timer record events are full press v or V to select

19:00~ 20:00

- -: - -~ - -: - -

- -: - -~- - : - -

PR-01

- -

the event that you wish to remove and replace.

Press b to delete the event.

- -

DATE

- -

T I M E

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Press SYSTEM MENU to set another timer record

event and follow steps 3 to 7.

Check that the timer event details are correct.

8 _{Press SYSTEM MENU twice.}

Press the numbered buttons to enter the station that

you wish to record.

When selecting stations 1 - 9, press 0 first, then the

channel number; for example Stations 3 - 03.You may

also select Channels by pressing v or V. Once selected

press B.

If you wish to record from AUDIO IN (L/R) andVIDEO

IN on the front or from the EURO SCART sockets on

the back of your unit, press INPUT to select for correct

display (AV1,AV2 or AV3).

If PLEASE CHECK is displayed, you have entered

incorrect and will need to re-enter the data.

Press 1 to switch your DVD+VCR Standby.

TIMER will appear in the display window while your

DVD+VCR waits to make the recording.

To watch a DVD during timer recording standby mode,

press POWER and DVD to switch to DVD mode.

Notes

G If at a later date you wish to delete or change any of

the settings in timer event memory you may do so

without having to enter all the timer event information

again. Simply display the timer event screen. Use v or V

to select the event that you wish to delete or change.

PR-01

- -

DATE

- -

T I M E

- -: - -~ - -: - -

- -: - -~- - : - -

Press b to delete the event...or

Press OK to change; then press b or B to select; Station,

Date, Start and End times and LP. Press v or V to enter

the correct information.

Press the numbered buttons to enter the date of the

5 _programme.

If you press OK before entering the date you may select

G IfTimer record events Overlap...

one of the following automated recording features. Use

1 or 2 to select, then press OK to confirm.

DLY To record every day (except Saturday and Sunday)

at the same time.

Make sure that the preset times of the timer recording

events do not overlap. If they do, the earlier programme

will always be given priority.

SU ~ SA To record at the same time every week.

Example:

Programme 1 is programmed to start at 16:00 and end at

17:00.

PR-01

- -

DATE

- -: - -~ - -: - -

- -

- -: - -~ - -: - - SP

- -: - -~- - : - - SP

Programme 2 is programmed to start at 16:30 and end at

17:30.

(In this case, Programme 1 will be recorded in its entirety,

but only the last 30 minutes of Programme 2 will be

recorded.)

DLY SU MO TU WE TH FR SA

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD andVideo CD

General Features

Playing a DVD andVideo CD

DVD VCD2.0 VCD1.1

Playback Setup

Note

G Turn on the TV and select the video input source

connected to the DVD player.

G Audio system:Turn on the audio system

and select the input source connected to the DVD player.

Unless stated otherwise, all operations described use the

remote control. Some features may also be available on

the Setup menu.

1 /3

DVD

Moving to anotherTITLE

Press OPEN/CLOSE to open the disc tray.

When a disc has more than one title, you can move to

another title as follows:

G Press DISPLAY, then press the appropriate numbered

button (0-9) to select a title number.

Load your chosen disc in the tray, with the

2 _{playback side down.}

When a double-sided DVD is inserted, make sure the

side you want to play is facing down.

Moving to another CHAPTER/TRACK

1 /12

1 /3

VCD1.1

DVD

Press OPEN/CLOSE to close the tray.

3 _{READING appears on the TV screen, and playback starts}

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

automatically. If playback does not start, press PLAY N.

In some cases, the disc menu might appear instead.

G Press . or > briefly during playback to select the

next chapter/track or to return to the

beginning of the current chapter/track.

G Press . twice briefly to step back to the

previous chapter/track.

G To go directly to any chapter during DVD playback, press

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD

orVideo CD which offer a menu.

DVD

Use the b B v V buttons to select the title/chapter you

want to view, then press OK to start playback.

Press TITLE or DISC MENU to return to the menu

screen.

DISPLAY.Then, press 3/4to select chapter/track icon.

Then, enter the chapter/track number using the numbered

buttons (0-9).

Note

VCD2.0

For two-digit numbers, press the numbered buttons

(0-9) in rapid succession.

G Use the number buttons to select the track you want to

view.

Press RETURN to return to the menu screen.

G Menu setting and the exact operating procedures for using

the menu may differ depending on the disc. Follow the

instructions on the each menu screen.

DVD VCD2.0 VCD1.1

1 Press . or > for about two seconds during

playback.

You also may set PBC to Off under setup. See page 19.

The player will now go into SEARCH mode.

2 Press . or > repeatedly to select the required

speed:

mX2, mX4, mX16, mX100 (backward) or MX2,

MX4, MX16, MX100 (forward).

With aVideo CD, the Search speed changes:

mX2, mX4, mX8 (backward) or MX2, MX4,

MX8 (forward).

Notes

– If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must be

entered and/or the disc must be authorized (see “Parental

Control”, on page 20).

– DVDs may have a region code.

Your player will not play discs that have a region code

different from your player.The region code for this player

is 2 (two).

– To watch a DVD during timer recording standby mode,

press POWER and DVD to switch to DVD mode.

3 To return to playback, press PLAY N.

Still Picture and Frame-by-frame playback

DVD VCD2.0 VCD1.1

1 Press PAUSE/STEP during playback.

The player will now go into PAUSE mode.

2 You can advance the picture frame-by-frame by pressing

PAUSE/STEP repeatedly on the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD andVideo CD

General Features (continued)

DVD VCD2.0 VCD1.1

Repeat A-B

OFF

DVD VCD2.0 VCD1.1

Slow Motion

1 Press . or > during still mode.

The player will enter SLOW mode.

To repeat a sequence in a title:

1 Press REPEAT A-B at your chosen starting point.

2 Press . or > repeatedly to select the required

speed : t 1/16, t 1/8, t 1/4 or t 1/2 (backward) or

T 1/16, T 1/8, T 1/4 or T 1/2 (forward).

appears briefly on the TV screen.

2 Press REPEAT A-B again at your chosen end point.

A B appears briefly on the TV screen, and the repeat sequence

3 To exit slow motion mode, press PLAY N.

begins (“A

B” appears the display window).

3 To cancel the sequence, press REPEAT A-B.

Note

G Slow motion playback in reverse is not applicable for

Video CD.

0:20:09

-:--:--

DVD

Time Search

The Time Search function allows you to start playing at

any chosen time on the disc.

1 Press DISPLAY during playback.The on-screen display

Karaoke DVD

VCD2.0 VCD1.1

Shuffle

1 Press SHUFFLE during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 To return to normal playback, press SHUFFLE again until

“NORMAL” appears on the TV screen.

2 Within 10 seconds, press

3/4to select the Time Search

icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

Tips

3 Within 10 seconds, use the number buttons to enter the

required start time. Enter hours, minutes, and seconds

from left to right in the box.

By pressing > during Random playback, the unit selects

another title (track) and resumes Random playback.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered.Then enter the correct numbers.

Note

G This function only works with DVD karaoke discs and

4 Within 10 seconds, press OK to confirm the start time.

Playback starts from the selected time on the disc. If you enter an

invalid time, playback will continue from the current point.

video CD without PBC.

G On aVideo CD with PBC, you must set PBC to Off on

the setup menu to use the Random function. See page 19.

DVD VCD2.0 VCD1.1

3D Surround

DVD VCD2.0 VCD1.1

Repeat

NORM.

3D SUR

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or more

speakers normally required to listen to

TITLE

TRACK

CHAPT

ALL

OFF

DVDVideo Discs - Repeat Chapter/Title/Off

1 To repeat the currently playing chapter, press REPEAT.

The Repeat Chapter icon appears on the TV screen.

multi-channel audio from a home theater system.

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

1 Press DISPLAY during playback.

2 Use v/V to select the sound icon.

The sound option will be highlighted.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

3 Use b/B to select “NORM.”, or “3D SUR”.

Video CDs - RepeatTrack/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

Screen Saver

A screen saver image appears when you leave the DVD

Player in stop mode for about fifteen minutes.

2 To repeat the disc currently playing, press REPEAT a

second time.

The Repeat All icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

Note

On aVideo CD with PBC, you must set PBC to Off on

the setup menu to use the Repeat function. See page 19.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD andVideo CD

DVD

General Features (continued)

Special DVD Features

DVD VCD2.0 VCD1.1

Zoom

Checking the contents of DVDVideo discs: Menus

DVDs may offer menus that allow you to access special

features.To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use the b/B/v/V buttons to highlight your

selection, then press OK.

The Zoom function allows you to enlarge the video image

and to move through the enlarged image.

1 Press ZOOM during playback or still playback to

activate the Zoom function.

If you press ZOOM repeatedly, the magnification level increase

up to six steps

2 Use the b B v V buttons to move through the zoomed

picture.

3 Press CLEAR to resume normal playback or return to the

paused image.

DVD

Title Menu

1 Press TITLE.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

Note

2 The menu can list camera angles, spoken language and

subtitle options, and chapters for the title.

G The zoom function may not work for some DVDs.

3 To remove the title menu, press TITLE again.

DVD VCD2.0 VCD1.1

Marker Search

DVD

Disc Menu

MARKER SEARCH

1/9

1 Press DISC MENU.

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

The disc menu is displayed.

2 To remove the disc menu, press DISC MENU again.

1 During disc playback, press MARKER when playback

reaches the spot that you want to memorize.

The Marker icon will appear on the TV screen briefly.

1 /1

DVD

Camera Angle

If the disc contains sequences recorded from different

camera angles, the angle icon blinks on the TV screen.You

can then change the camera angle if you wish.

G Press ANGLE repeatedly during playback to select a

desired angle.

2 Repeat step 1 to enter up to nine Marker points on a disc.

To Recall a Marked Scene

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

The number of the current angle appears on the display.

2 Within 10 seconds, press b/B to select a Marker number

that you want to recall.

3 Press OK.

Playback will start from the Marked scene.

1 ENG

5.1 CH

DVD

Changing the Audio Language

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

4 To remove the MARKER SEARCH menu, press SEARCH.

VCD2.0 VCD1.1

Changing the Audio Channel

To clear a Marked Scene

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT or RIGHT).

2 Within 10 seconds, press b/B to select a Marker number

that you want to erase.

ABC

1 ENG

DVD

Subtitles

3 Press CLEAR.

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker numbers.

5 To remove the MARKER SEARCH menu, press SEARCH.

Note

appears, the feature is not available on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio and MP3 Disc

Playing an Audio CD and MP3

Disc

Notes on MP3 Recordings

About MP3

G An MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme.We call files that

have the “.mp3” file extension “MP3 files”.

G The player cannot read an MP3 file that has a file

extension other than “.mp3”.

MP3

The DVD Player can play MP3 formatted recordings on

CD-ROM, CD-R or CD-RW discs.

Before playing MP3 recordings, read the notes on MP3

Recordings on right.

MP3 Disc compatibility with this player is limited

as follows:

1 Sampling Frequency / only at 44.1kHz

Insert a disc and close the tray.

Audio CD; Audio CD menu appears on the TV screen

go to step 4.

MP3 disc; The MP3-JPEG choice menu appears on the

TV screen. Go to step 2

2 Bit rate / within 32 - 320kbps

3 CD-R physical format should be “ISO 9660”

4 If you record MP3 files using the software which cannot

create a FILE SYSTEM, for example “Direct-CD” etc., it is

impossible to playback MP3 files.We recommend that you

use “Easy-CD Creator”, which creates an ISO9660 file

system.

5 A single session disc requires MP3 files in the first track. If

there is no MP3 file in the 1st track, it cannot playback

MP3 files. If you wish to playback MP3 files, format all the

data in the disc or use a new one.

6 File names should be named using 8 letters or less and

must incorporate “.mp3” extension e.g.“********.MP3”.

7 Do not use special letters such as “/ : * ? “ < > ” etc.

8 Total number of files on the disc should be less than 650.

MP3

JPEG

Use v/V to select the MP3 then press OK.

The MP3 menu appears on the TV screen.

Press RETURN to move to the MP3 -JPEG choice menu.

Program

MP3

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Clear All

OFF

00:00

Use v/V to select a folder then press OK.

3 _{A list of files in the folder appears.}

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically set

to these standards.There are many different types of

recordable disc formats (including CD-R containing MP3

files).That require certain pre-existing conditions (see

above) to insure compatible playback.

Use v/V to select a track then press PLAY N

or OK.

Playback starts.

During playback, the current track’s elapsed playing time

will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

Customers should also note that permission is

required in order to download MP3 files and music

from the Internet. Our company has no right to

grant such permission. Permission should always

be sought from the copyright owner.

Program

MP3

Program

TRACK01

TRACK 1.mp3

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Clear All

OFF

Clear All

NORM.

00:00

0: 56: 18

STER.

Audio CD menu

Tip

MP3 menu

If you are in a file list and want to return to the Folder

list, use the v/V to highlight

and press OK to return

to the previous menu screen.

To stop playback at any other time, press

5 _{STOP x.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio and MP3 Disc (Continued)

MP3

Pause

Repeat A-B

To repeat a sequence.

1 During disc playback, press REPEAT A-B at your chosen

starting point.

The Repeat icon and “

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY N or press

PAUSE/STEP again.

” appears on the menu screen.

G Press . or > briefly during

playback to go to the next track or to return to the

beginning of the current track.

G Press . twice briefly to step back to the

previous track.

MP3

2 Press REPEAT A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen, and the

sequence begins to play repeatedly.

Moving to anotherTrack

3 To exit the sequence and return to normal play, press

REPEAT A-B again.

The Repeat icon and “OFF” appears on the menu screen.

G In case of audio CD, to go directly to any track, enter the

track number using the numbered buttons (0-9) during

playback.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or more

speakers normally required to listen to multi-

channel audio from a home theater system.

1 Press DISPLAY or AUDIO during playback.

2 Use b/B to select the sound icon.

The sound option will be highlighted.

MP3

RepeatTrack/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu screen.

2 To repeat all tracks on a disc, press REPEAT a second

time.

The Repeat icon and “ALL” appears on the menu screen.

3 To cancel Repeat mode, press REPEAT a third time.

3 Use v/V to select “NORM.”, or “3D SUR”.

The Repeat icon and “OFF” appears on the menu screen.

Changing the Audio Channel

MP3

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

1 Press m or M during playback.

The player will now go into SEARCH mode.

2 Press m or M repeatedly to select the required speed:

mX2, mX4, mX8 (backward) or MX2, MX4,

MX8 (forward).

Search speed and direction are indicated on the menu screen.

3 To exit SEARCH mode, press PLAY N.

MP3

Shuffle

1 Press SHUFFLE during playback or when playback is

stopped.

The unit automatically begins Random Playback and

“RAND.” appears on the menu screen.

2 To return to normal playback, press SHUFFLE.

“RAND.” disappears on the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with JPEG Disc

Moving to another File

Press . or > once during viewing a picture to

JPEG

Viewing a JPEG disc

This DVD+VCR can play discs with JPEG files and Kodak

picture CD. Before playing JPEG recordings, read the notes

on JPEG Recordings on right.

advance to the next file or to the previous file.

Still Picture

1 Press PAUSE/STEP during slide show.

The player will now go into PAUSE mode.

2 To return to the slide show, press PLAY N or press

PAUSE/STEP again.

Insert a disc and close the tray.

The MP3-JPEG choice menu appears on the TV screen.

MP3

JPEG

To flip the picture

Use v/V to select the JPEG then press OK.

Press v/V during showing a picture to flip the

2 _{The JPEG menu appears on the TV screen.}

picture horizontally or a vertically.

JPEG

To rotate picture

Press b/B during showing a picture to rotate the

picture clockwise or counter clockwise.

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Notes on JPEG Recordings

Off

Slide Speed

G Depending upon the size and number of the JPEG files, it

could take a long time for the DVD+VCR to read the

disc’s contents. If you don’t see an on-screen display after

several minutes, some of the files are too big — reduce

the resolution of the JPEG files to less than 2 mega pixels

and burn another disc.

Use v/V to select a folder then press OK.

3 _{A list of files in the folder appears.}

Press RETURN to move to the MP3-JPEG choice menu.

Tip

If you are in a file list and want to return to the Folder

G Total number of files and folders on the disc should be less

than 650.

list, use the v/V buttons on the remote to highlight “

and press OK to return to the previous menu screen.

”

G Some disc may be incompatible due to different recording

format or condition of disc.

If you want to view a particular file, press v/V to

G When you are using software such as “Easy CD Creator”

to burn the jpeg files into the CD-R, ensure that all the

selected files have the “.jpg” extensions when copying into

the CD layout.

4 _{highlight a file and press OK or PLAY N.}

Viewing the file proceeding starts.

During viewing a file, press RETURN to move to the

previous menu (JPEG menu).

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

G If the files have “.jpe” or “.jpeg” extensions, please rename

them as “.jpg” files.

G File names without “.jpg” extension will not be able to be

read by this DVD+VCR. Even though the files are shown

as JPEG image files in windows explorer.

Folder1

JPEG

Picture1.jpg

Picture2.jpg

Picture3.jpg

Picture4.jpg

Picture5.jpg

Picture6.jpg

Picture7.jpg

5/32

1024X768 Picture5.jpg

Off

5/32

1024X768

Slide Speed

Tip

There are three viewing Slide Speed options: Fast, Normal,

Slow, and Off. Press 1/2 to highlight the Slide Speed then

press 3/4 to select the option you want to use, and

press OK.

To stop viewing at any other time, press STOP.

5 _{The JPEG menu appears.}

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3

VCD2.0 VCD1.1

Programmed Playback

Programmed Playback with Audio Programmed Playback withVideo

CD and MP3 Disc

The Program function enables you to store your favorite

tracks from any disc in the player memory.

Program can contain 30 tracks.

Note

On aVideo CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 19.

Press PROGRAM during playback or in the stop

mode to enter the Program Edit mode.

InsertVideo CD and close the tray.

The

mark will appear to the right of the word Program on

the right side of the menu screen.

Press PROGRAM while playback is stopped.

TheVCD Program menu will appear.

Note

Program

VCD

Press PROGRAM to exit the Program Edit mode; the

mark will disappear.

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

Select a track, then press OK to place the

Clear All

2 _{selected track on the Program list.}

Repeat step 2 to place additional tracks on the

3 _{Program list.}

Note

Press RETURN or PROGRAM to exit the Program menu.

Program

MP3

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

TRACK 8.mp3

TRACK 2.mp3

TRACK 4.mp3

TRACK 3.mp3

TRACK 1.mp3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Follow steps 2-6 of “Programmed Playback with

3 _{Audio CD and MP3 disc” on left.}

Clear All

OFF

Clear All

NORM.

To resume normal playback from

0: 56: 18

STER.

00:00

programmed playback, press PROGRAM.

“NORMAL” appears on the TV screen.

Audio CD menu

MP3 menu

Repeat ProgrammedTracks

Press B.

G To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu screen.

G To repeat all tracks on the program list, press REPEAT a

second time.

The Repeat icon and “ALL” appears on the menu screen.

G To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

The programmed track you selected last is highlighted on the

program list.

Use v/V to select the track you want to start

5 _playing.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

Press PLAY N to start.

Erasing aTrack from Program List

1 Press PROGRAM during playback (Audio CD and MP3

disc only) or in the stop mode to enter the Program Edit

mode.

Playback begins in the order in which you programmed the

tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Program list have

played once.

The

mark will appear.

To resume normal playback from programmed

2 Press 2 to move to the Program list.

3 Use 3/4to select the track that you wish to erase from

the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

playback, press program to disappear the

mark and then select a track of CD (or MP3) list

and then press OK.

“PROG.” disappears on the menu screen.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track from Program List” as

above.

2 Use 3/4to select “Clear All”, then press OK.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation

On Screen Display

You may easily display the current time or tape counter,

amount of tape left, day, month, year, day of week,

programme channel, tape speed and operational mode of

yourVCR on the TV screen. If a recording is taking place

these On Screen Displays will not be recorded onto the

tape.

Video Doctor (Self-Diagnosis)

This feature informs you that there is a problem with your

VCR.These error messages will appear on the TV screen.

Press SYSTEM MENU.

Press 1or 2to select Dr.

Press OK.

Press DISPLAY to display.

Press DISPLAY repeatedly to cycle through the

display options.The tape counter and amount of tape

left will appear if there is a tape loaded.

VCR

A B

Pr-12

TIME SYS-

DATE

SET

REC

ACMS

OSD Dr.

NIC

Dr.

TEM

OSD

After 3 seconds the majority of the On Screen Displays

2 _{will clear leaving only the clock or tape counter and the}

amount of tape left on the screen.

16:9 DECO-

DER

AUDIO OFF 4:3

OPR

VCR

Press DISPLAY again to remove all displays from the

TV screen.

VIDEO DOCTOR

Dr.

HEAD STATUS

TAPE STATUS

NO. OF TIMER PROGRAMME

NEXT TIMER PROGRAMME

Tape Counter Memory Stop

The DigitalTape Counter can be displayed on the

display window instead of the time by pressing DISPLAY

on the remote control.The Digital Tape Counter indicates

the relative positions of recordings on the tape.

Press 3or 4to check a problem.

2 _{HEAD STATUS}

O PLEASE CLEAN:

Clean your video heads.

Press DISPLAY.

Press CLEAR to set the counter to 0:00:00.

Press PLAY N or start recording.

The tape counter will display the actual play time in

hours, minutes and seconds.

TAPE STATUS

O NOT RECORDABLE:

Insert a tape with its protection tab in place

NO. OFTIMER PROGRAMME

O 2

Shows the number of timer recording.

Press STOP x when playback or recording is

2 _complete.

Press ..

NEXTTIMER PROGRAMME

O PR-01 26 10:00~11:00 SP

Shows the current status of timer recording.

The tape will rewind and automatically stop when the

counter returns to 0:00:00.

Press SYSTEM MENU.

Child Lock

The control buttons on the front of theVCR can be

switched off so that yourVCR can only be operated using

the remote control.

Press C.LOCK.

will appear in the display window.

None of the buttons on the front of yourVCR will

work (except EJECT).

If any buttons on the front of your unit are pressed

will flicker in the display window for a few seconds.

Press C.LOCK again to switch off the child lock.

will disappear in the display window.

Note

– C.LOCK is not available on the DVD mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation (Continued)

Press D or E repeatedly to select: AUTO, 4:3 or 16:9.

Hi-Fi Stereo Sound System

2 _AUTO:

YourVCR will record and playback Hi-Fi stereo sound. In

addition it has a stereo NICAM digital stereo sound

decoder.This allows you to record and playback the sound

in several different ways.Video cassettes recorded on your

VCR will have a normal mono audio track and twoVHS

Hi-Fi stereo audio tracks.These stereo tracks allow you to

make audio recordings in Hi-Fi stereo or bilingual mode

from a TV broadcast, stereo audio system, video disc or

another Hi-FiVCR.

Automatically plays back Wide-Screen

programmes as Wide-Screen and Normal

programmes as normal.

4:3

Only for playing back and recording Normal format

recordings (4:3).

16:9:

Only for playing back and recording Wide-Screen format

recordings (16:9).

YourVCR’s NICAM digital sound decoder allows you to

enjoy broadcasts with NICAM sound, as well as standard

stereo, bilingual and mono sound.The particular type of

sound received or that recorded will be briefly displayed

on the TV screen for a couple of seconds:

STEREO NICAM

VCR

A B

Pr-12

SYS-

TIME

SET

REC

AUDIO

ACMS

OSD

AUTO Dr.

TEM

DATE

16:9

4:3

16:9

OSD

16:9 DECO-

DER

OFF 4:3

OPR

Sound is automatically recorded on the Hi-Fi stereo and

mono tracks of the video tape.

BIL NICAM

Both audio channels will be recorded on the Hi-Fi stereo

tracks.The primary language channel (left) will be

recorded on the mono track of the video tape.

MONO

Press SYSTEM MENU to remove the menus from the

3 _{TV screen.}

To enjoy Wide-Screen playback you must connect your

VCR to the TV using a SCART cable.

To set the decoder

The sound is recorded on the Hi-Fi tracks and the mono

track of the video tape without any separation.

Press SYSTEM MENU. Press F or G to select

2 _AUDIO.

We have already described, how to connect a decoder for

pay-TV station as CANAL+ or PREMIERE on page 10. For

the recording of an encoded station you do not have to

control anything.You just select the station and wait

shortly until the decoding will start.

Press D or E to select STEREO, LEFT, RIGHT and

3 _MONO.

In BIL NICAM playback the primary language is output

on the left channel and the secondary channel is output

simultaneously from the right channel when audio

output is set to STEREO.The primary language will be

output from both channels when the audio setting is

MONO.

Press SYSTEM MENU.

The main menu will appear on the TV screen.

Press ^For G to select the DECODER.

Press OK.

Please note that when adjusting the tracking control Hi-

Fi stereo sound may revert to MONO.

Press D or E to select.

2 _{ON: When the decoder is connected to the AV2 socket.}

OFF:When anotherVCR is connected to the AV2

socket.

Wide Screen Compatibility 16:9

Press SYSTEM MENU to return to a TV picture.

YourVCR can record and play back wide screen aspect

ratio programmes (16:9).To record a wide screen format

programme successfully the correct type of wide screen

signal must be broadcast by the TV station.

DVD

VCD1.1

Last Condition Memory

This player memorizes the last condition for the last disc

you have watched. Settings remain in memory even if you

remove the disc from the player or switch off the player. If

you load a disc that has its settings memorized, the latest

stop position is automatically recalled.

Switch on yourVCR.

Press SYSTEM MENU.

Press F or G to select 16:9/4:3.

Press OK.

Notes

– Settings are stored in memory for use any time.

– This player does not memorize settings of a disc if you

switch off the player before commencing to play it.

VCR

A B

VCR

A B

Pr-12

SYS-

TIME

SET

SYS-

TEM

REC

ACMS

OSD

TEM

Dr.

SET

DATE

AUTO

4:3

REC

AUDIO

ACMS

OSD

Dr.

DATE

16:9

4:3

16:9

4:3

NIC

OSD

16:9 DECO-

DER

16:9 DECO-

DER

_OPR16:9

AUDIO OFF 4:3

OFF 4:3

OPR

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Recording

Copying from DVDToVCR

This unit allows you to copy the contents of a DVD to a

VHS tape with a press of the DIRECT DUBBING button.

Recording from another video

recorder

With this video recorder you can make recordings from

an external source, such as copying from another video

recorder or a camcorder.

Note

G If the DVD you are attempting to copy is copy

protected, you may not be able to copy the disc.

Note

Insert Disc

In the following description, this video recorder will be

one used for recording and will be referred to asVCR B.

The other appliance will be used for playback and will be

referred to asVCR A.

Insert the disc you wish to copy in the DVD deck and

close the disc tray.

InsertVHSTape

2 _{Insert a blankVHS videotape into theVCR deck.}

VCR A should be connected to the SCART socket on

the rear panel of your unit or the AV sockets on the

front panel of your unit.

Copy the DVD toVHSTape

3 _{Press the DIRECT DUBBING button on the unit front}

panel.

Insert the recorded tape intoVCR A and a blank tape

G The DVD will go into Play mode and theVCR will go

into Record mode.

2 _{intoVCR B.}

G If the DVD disc menu appears, you may need to press

the Play button manually to begin copying.

Stop the Copy Process.

To start recording, press the RECORD onVCR B and

3 _{PLAY N onVCR A.}

4 _{When the DVD is finished playing, press the STOP}

button twice within 5 seconds to end the copy.

G You must stop the Copy process manually when the

DVD movie ends, or the unit may replay and record

over and over again.

When you want to finish copying,

4 _{press the STOP x on both video recorders.}

Press STOP twice within 5 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

G DVD orVCR button is not switched

properly.

G Refer to page 6.

DVD orVCR do not

work properly.

No power.

G The power cord is disconnected.

G Plug the power cord into the wall outlet

securely.

The power is on, but the

DVD player does not

work.

G No disc is inserted.

G Insert a disc. (Check that the DVD or, audio

CD indicator in the display window is lit.)

G The TV is not set to receive DVD signal

output.

G Select the appropriate video input mode on

the TV so the picture from the DVD player

appears on the TV screen.

No picture.

G The video cable is not connected securely.

G Connect the video cable into the jacks

securely.

G The equipment connected with the audio

cable is not set to receive DVD signal

output.

G Select the correct input mode of the audio

receiver so you can listen to the sound from

the DVD player.

No sound.

G The audio cables are not connected

G Connect the audio cable into the jacks

securely.

G The power of the equipment connected

G Turn on the equipment connected with the

with the audio cable is turned off.

audio cable.

G The Digital Audio Output is set to the

wrong position.

G Set the Digital Audio Output to the

correct position, then turn on the DVD

player again by pressing POWER.

G The disc is dirty.

G Clean the disc.

The picture is poor.

G The TV channels are not tuned in properly. G Check tuning, carry out tuning again.

G An unplayable disc is inserted.

G Insert a playable disc. (Check the disc type

and Regional code.)

G Place the disc with the playback side down.

The DVD player does not

start playback.

G The disc is placed upside down.

G The disc is not placed within the guide.

G Place the disc on the disc tray correctly inside

the guide.

G The disc is dirty.

G Clean the disc.

G The Rating level is set.

G Cancel the Rating function or change the

rating level.

G There is an obstacle in the path of the

remote control and this unit.

G Remove the obstacle.

The remote control does

not work properly.

G The batteries in the remote control are

G Replace the batteries with new ones.

exhausted.

Video tape cannot be

inserted.

G Is the cassette compartment empty?

G Eject the tape in.

G Switch ‘AUDIO’ in the main menu to

‘STEREO’.

G Audio mode is not set properly.

No Hi-Fi sound

Video Head Cleaning

Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up.

High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. Clean

the video heads with a commercially available video heads cleaning tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”,“Disc Subtitle” and/or “Disc Menu”

(See page 18).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Danish

Sanskrit

Dutch

Korean

Kurdish

Laothian

Latin

Scots Gaelic

Serbian

Wolof

English

Xhosa

Yiddish

Yoruba

Zulu

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Country/Area Code List

Enter the appropriate code number for the initial setting “Area Code” (See page 20).

Code Country/Area

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Monaco

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

CapeVerde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich Isls.

Guatemala

Guam (USA)

Mauritius

Maldives

MW Malawi

GW Guinea Bissau

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Guyana

Hong Kong

Heard and McDonald Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

Ukraine

Uganda

United Kingdom

USA Minor Outlying Islands

United States

Uruguay

Uzbekistan

Vatican City State

SaintVincent & Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Jordan

Japan

Kenya

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Cayman Islands

Kazakhstan

Laos

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Specification

General

Power requirements

Power consumption

Dimensions (approx.)

Mass (approx.)

AC 220-230V, 50Hz

23W

430 X 97.5 X 293 mm (w/h/d)

4.8 kg

Operating temperature

Operating humidity

Timer

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

24 hours display type

System

Laser

Video Head system

Signal system

Semiconductor laser, wavelength 650 nm

Double azimuth 6 heads, helical scanning.

PAL

Frequency response

DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT connectors only)

Less than 0.008%

More than 100 dB (DVD)

More than 95 dB (CD)

Inputs (VCR)

Audio

-6.0dBm, more than 10 kohms (SCART)

-6.0dBm, more than 47 kohms (RCA)

1.0Vp-p, 75 ohms, unbalanced (SCART/RCA)

Video

Outputs (DVD)

Audio output (digital audio)

Audio output (analog audio)

Outputs (VCR)

0.5V (p-p), 75 Ω, RCA jack x 1

2.0Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 2

Audio

Video

-6.0dBm, less than 1 kohms (SCART)

1.0Vp-p, 75 ohms, unbalanced (SCART)

Design and specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of

reserved.

“DTS” and “DTS Digital Out” are trademarks of DigitalTheater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pelco Home Theater Screen C1910M User Manual
Pelco Video Game Keyboard KBD960 User Manual
Philips CD Player AZ1032MP3 CD User Manual
Philips CD Player PSS010 00C User Manual
Philips Electric Shaver 5862XL User Manual
Philips Power Supply LR03PB4C User Manual
Pioneer Home Theater System HTZ373DVD User Manual
Planet Technology Network Card WAP 6100 User Manual
Polaroid Portable DVD Player PDX 0075 User Manual
Poulan Blower BV200 BV1650 BV1800 BV1850 BV2000 User Manual