I N S T A L L A T I O N / O P E R A T I O N
KBD960/KBR960 Series
Desktop Intelligent
Keyboard
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Important Safeguards and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Keyboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Control Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Lens Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Joystick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Turbo Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Escape Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting to the CM6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Setup Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Calibrating the Joystick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Creating a Setup Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Creating a Define Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Adjusting the Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Configuring the Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Exiting Setup Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Logging On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Accessing the KBD960 Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Sending/Receiving Keyboard Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Accessing the CM6800 Main Programming Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Diagnostic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Testing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Testing the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Testing the Serial Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Testing the Dip Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Selecting Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Main Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Function Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Main Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Camera Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Function Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Operating PTZ Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Advanced Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Creating Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Recalling Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Deleting Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Creating Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
C1519M-E (6/06)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Rules to Follow When Creating Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Creating Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Partial Zone Overlap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Erasing Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Starting Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Pausing Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Stopping Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Operating Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Activating Relays Using F12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Multiplexer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Video Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Resetting Triggered Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
List of Tables
Function Key Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Monitor Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
MUX Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
MUX Menu 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
GPI Menu 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
GPI Menu 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Setup LCD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Relay Unit 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Y
4
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Illustrations
Connecting to the CM6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Enter Setup PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Joystick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Advance Setup 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Advance Setup 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
10 Logon Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
11 Logoff Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
12 Main Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
13 Main Menu 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
14 Monitor Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
15 Camera Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
16 Camera Menu 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
17 MUX Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
18 MUX Menu 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
19 Alarm Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
20 GPI Menu 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
21 GPI Menu 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
22 Preset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
23 Macro Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
24 Sequence Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
25 Define Menu 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
26 Define Menu 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
27 Define Preset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
28 Define Zone Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
29 Setup LCD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
30 Programming Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
31 Database Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
32 Password Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
33 Main Programming Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
34 Diagnostic Mode Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
35 LCD Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
36 Keyboard Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
37 SIO Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
38 DIP Switch Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
39 Pattern Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
40 Basic Zone Creation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
41 Partial Zone Overlap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
42 Embedded Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
43 MUX Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
44 Icons Legend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
45 Setup Mode Menu Tree (DIP Switch 2 ON) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
46 Diagnostic Mode Menu Tree (DIP Switch 1 ON) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
47 Operation Mode Menu Tree (DIP Switch 2 OFF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
C1519M-E (6/06)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission’s rules.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio and television reception.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
6
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards and Warnings
1. Read, keep, and follow these instructions.
2. Heed all warnings.
3. There are no user-serviceable parts inside this unit. Only authorized service personnel may open the unit.
4. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
5. WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture if this unit is designed for indoor use only.
6. Unless this unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not
be installed where exposed to rain or moisture.
7. Do not expose this unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit.
8. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
9. The installation method and materials should be capable of supporting four times the weight of the unit and equipment.
10. Do not install near any heat source.
11. Only use attachments/accessories specified by the manufacturer.
12. Clean only with dry cloth.
13. Do not defeat the safety purpose of the polarized or grounding-type plug.
14. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from
the unit.
15. Unplug this unit during lightning storms or when unused for long periods of time.
16. A CCC-approved power cord must be used to power this equipment when used in China.
CAUTION:
This symbol indicates that dangerous voltage constituting a risk of electric shock
is present within this unit.
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.
FOR QUALIFIED SERVICE PERSONNEL ONLY
1. Use only replacement parts recommended by Pelco.
2. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify
the exposed parts have not been connected to line circuitry.
C1519M-E (6/06)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
The KBD960/KBR960 Keyboard includes Pelco’s proprietary M protocol, allowing it to be used with all M devices, such as Pelco’s latest matrix
switch – the CM6800. You can program the keyboard, and you can create and execute macros. You have access to effective monitoring
procedures for any CCTV application.
You can assign simple or complex functions to many of the keys. This allows you to configure the keyboard to suit a specific monitoring
environment. Some of the keyboard features include the following:
•
•
•
•
•
•
•
•
•
User-friendly, icon-driven design
Select and monitor any connected camera or video input
Control pan and tilt functions for cameras and configured receivers
Control camera iris (zoom and focus) for configured equipment
Control camera auxiliary functions for configured equipment
Control peripheral devices, such as video printers, frame stores, and video multiplexers
Select macros to execute complex procedures
Store and recall camera presets for equipment with preset capabilities
Download function key configurations to and from other keyboards
MODELS
KBD960-US
Programmable keyboard; 100-240 VAC, 50/60 Hz; comes with US-320-C5 power cord
Same as KBD960-US except for use in the United Kingdom with UK-320-C5 power cord
Same as KBD960-US except for use in Australia with AU-320-C5 power cord
Same as KBD960-US except for use in Europe with EU-320-C5 power cord
Same as KBD960-US plus rack mountable
KBD960-UK
KBD960-AU
KBD960-EU
KBR960-US
KBR960-UK
KBR960-AU
KBR960-EU
Same as KBD960-UK plus rack mountable
Same as KBD960-AU plus rack mountable
Same as KBD960-EU plus rack mountable
READING THIS MANUAL
Each icon key corresponds to an icon on the LCD display. Each icon represents a function.
You will be instructed to “Select [icon]” when reading this manual. Press the icon key that corresponds to the icon on the LCD.
The functions of the KBR960 are the same as the KBD960. The only difference is that the KBR960 models can be mounted onto a rack.
Any reference in this manual to the KBD960 also applies to the KBR960 models.
You will read references to the CM6800. However, the M protocol allows this keyboard to be used with other M devices.
8
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
KEYBOARD LAYOUT
The KBD960 keyboard consists of the following:
ᕡ LCD Display
ᕢ Icon Keys
ᕣ Keypad
ᕡ
ᕢ
ᕧ
ᕩ
ᕤ Function Keys
ᕥ Control Keys
ᕦ Lens Keys
ᕧ Joystick
ᕨ
ᕤ
ᕦ
ᕣ
ᕥ
ᕨ Turbo Key
ᕩ Escape Key
00891
KBD960
KBR960
Figure 1. KBD960/KBR960
LCD DISPLAY
The LCD is a four-line display. Each line displays different information.
Line 1
Line 2
Line 3
Line 4
Displays the video output (which is typically a monitor) and the video input source (which is typically a camera).
Displays the last number entered and the icon of the current menu.
Displays alarm messages and other prompts.
Displays the icons for the icon keys.
ICON KEYS
These eight blue keys correspond to the icons directly above on the LCD display. These icons change depending on the mode you are in.
KEYPAD
The keyboard has a standard numeric keypad with two additional keys for selecting cameras and monitors.
FUNCTION KEYS
The 24 function keys (F1-F24) can be programmed according to your application and the type of CCTV installation.
Refer to the Installation section for an explanation on how to program these keys. The supplied blank labels and punched LEXAN® decal overlay
should be used.
C1519M-E (6/06)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL KEYS
Step backward through available camera selections
Step forward through available camera selections
Select and execute macros
Rcl: Recall previous selections
Alt: Reserved for future use
Prst: Recall preset
Lock: Reserved for future use
LENS KEYS
You can use these keys to control cameras equipped with motorized zoom lenses and motorized pan and tilt units. These keys are sometimes
used to activate other functions. For example, the Open/Close key is also used when creating preset labels.
Zoom in/out
Focus near/far
Open/close the iris
JOYSTICK
The proportional joystick allows variable speed control. It gives you full control over the pan and tilt movements, from minimum to maximum
speed. You should calibrate the joystick before setting up anything else.
TURBO KEY
Pressing this key while moving the joystick switches pan motors into high-speed mode on equipment that is capable of panning.
ESCAPE KEY
This key exits you from the mode you are in.
10
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The following items are supplied:
•
•
•
•
•
KBD960/KBR960 keyboard
KBD-PS-1 universal power supply
Two 25 ft (7.6 m) straight RJ-45 cables
10 blank labels and 10 punched LEXAN decal overlays
One power cord (either US-320-C5, UK-320-C5, AU-320-C5, EU-320-C5)
CONNECTING TO THE CM6800
NOTE: Communication to the keyboards is RS-485. Pelco recommends using four-conductor, shielded, 18-gauge twisted pairs, such as
Belden 9418, or a similar cable that meets or exceeds the basic requirements for EIA RS-485 applications.
1. Set all DIP switches OFF. The DIP switches are located on the bottom of the keyboard.
2. Connect the RJ-45 straight cable from COM 1 of the keyboard to the power supply. See Figure 2.
3. Connect the other RJ-45 straight cable from the power supply to COM 3 of the CM6800.
4. Plug in the power supply.
Main port used for power into keyboard, and for communication link to
Pelco 6800. These I/O lines are connected to 8-pin RJ socket JP 1 as
shown below. Incoming DC is also brought in via this COM port.
VOLUME
8
JP1 Pin
Function
JP1 Pin
Function
1
2
3
4
RS-485 Tx+
RS-485 Tx-
5
6
7
8
GND (0 VDC IN)
COM 1
DIP SWITCHES
RESET
BUTTON
RS-485 SERIAL PORT
RS-485 Rx-
RS-485 R+
+12 VDC IN
ALARM
1
2
3
4
5
6
7
8
COM
1
5
CONTROL
PTZ
2
3
4
6
7
8
A
T
+
T
-
R
R
+
T
+
T
-
R
-
R
+
B
-
COM 3 DEFAULT SETTINGS:
M, RS-485, 19200 BAUD,
NO PARITY, 8 DATA BITS,
1 STOP BIT
31
3
32
4
OUT
F
3
1
2
COM 1
7
8
120/230~
50/60 HZ
25 WATTS
DEO OUTPUTS
STRAIGHT CABLE
(SUPPLIED)
RS-485
KBD960
RJ-45 PIN-OUTS
CM6800 COM 3
RJ-45 PIN-OUTS
UNIVERSAL POWER SUPPLY
1 Tx+
2 Tx-
3
4
5
6
1
2
3
4
5
6
7
8
Rx+
Rx-
NC
NC
GROUND
NC
Tx-
STRAIGHT CABLE
(SUPPLIED)
7
8
Rx-
Rx+
Tx+
KBD960
Figure 2. Connecting to the CM6800
C1519M-E (6/06)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MODE
You can configure the KBD960 in the Setup Mode. You can do the following:
•
•
•
•
•
•
•
Create a Personal Identification Number (PIN) for entering the Setup Mode.
Create a PIN that provides access to features on the Define Menu.
Calibrate the joystick.
Adjust the display brightness.
Set the data transmission speeds for the keyboard’s three COM ports.
Define the function keys.
Select a host port.
The default setup PIN is 1234. You can change it in the Setup Mode.
ACTIVATING SETUP MODE
1. Set DIP Switch 2 ON. “ENTER SETUP PIN” appears.
ENTER SETUP PIN
00895
Figure 3. Enter Setup PIN
2. Enter your PIN number (the default number is 1234) and “SETUP MODE” appears.
SETUP MODE vX.XX
JSTK
LCD
ADV
00896
Figure 4. Setup Mode
12
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
CALIBRATING THE JOYSTICK
1. Select
from Setup Mode. “JOYSTICK SETUP” appears on the LCD.
JSTK
JOYSTICK SETUP
xxx
(xxx, xxx)
xxx
xxx
xxx
00897
Figure 5. Joystick Setup
with the joystick in the center default position.
2. Select
3. Move the joystick completely to the left and select
4. Move the joystick completely to the right and select
5. Move the joystick completely down and select
.
.
.
6. Move the joystick completely up and select
.
7. Select
8. Select
to save the joystick configuration.
to return to the Setup Menu.
RESTORING FACTORY DEFAULT SETTINGS
1. Set DIP switches 1, 2, and 8 ON and recycle power.
2. Re-calibrate the joystick if using a keyboard version before 1.20.
For version 1.20 and later keyboards, the joystick is automatically calibrated during a factory default initialization.
CREATING A SETUP PIN
The factory settings for the KBD960 include the default setup PIN 1234. Follow these steps to change the default PIN:
1. Select
2. Select
from Setup Mode.
ADV
and/or
to locate Advance Setup 2.
Advance Setup 2
Setup Pin ****
Confirm ****
Define Pin ****
Confirm ****
DEF
NUM
00898
Figure 6. Advance Setup 2
C1519M-E (6/06)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select
4. Select
and/or
to choose Setup PIN.
DEF
NUM
DEF
, enter a four-digit PIN, and select
once again.
NUM
DEF
NUM
DEF
5. Advance the cursor to the confirm row, select
The menu indicates “OK” if confirmed.
, re-enter your PIN, and select
once again.
NUM
6. Select
to save your PIN.
CREATING A DEFINE PIN
You also need a PIN to access the extended keyboard functions that are available in the Define Menu. The default define PIN is also 1234. Follow
these steps to change it (refer to Figure 6):
ADV
1. Select
2. Select
3. Select
4. Select
from Setup Mode.
and/or
and/or
to locate Advance Setup 2.
to choose Define PIN.
DEF
NUM
DEF
, enter a four-digit PIN, and select
once again.
NUM
DEF
NUM
DEF
NUM
5. Advance the cursor to the confirm row, select
The menu indicates “OK” if confirmed.
, re-enter your PIN, and select
once again.
6. Select
to save your PIN.
ADJUSTING THE DISPLAY BRIGHTNESS
LCD
1. Select
from Setup Mode.
LCD BRIGHTNESS SETUP
00899
Figure 7. LCD Brightness Setup
2. Select
3. Select
to make the display brighter or
to make the display dimmer.
and then
.
LCD
You can also adjust the display brightness by selecting
14
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE COM PORTS
ADV
1. Select
from Setup Mode and scroll to the Advance Setup 1 screen.
Advance Setup 1
COM1
COM2
COM3
Local Address
None (Host)
None
None
1
00900
Figure 8. Advance Setup 1
to navigate to the COM 1 row.
2. Select
3. Select
4. Select
5. Select
6. Select
7. Select
8. Select
and/or
and/or
to assign a baud rate.
to set parity for the communications port.
to set the Host.
and/or
and/or
to navigate to the Local Address row.
to assign an address.
to save your configuration and then select
to return to the Setup Mode.
Default Settings
•
•
COM 1 - 19200 baud, No Parity, Set as HOST
Address -1
NOTES:
•
•
COM 2 is functional, but only COM 1 is optimized for the protocol. COM 3 is not used for normal operation.
Pelco recommends that you reserve addresses 1-8 for the KBD960/KBR960 keyboards. In System 6800, you should not use an address
higher than 8.
C1519M-E (6/06)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE FUNCTION KEYS
1. Select
from Setup Mode to switch to the key define mode.
NOT DEFINED
NUMx
ESC
KEY DEFINE
PLEASE ENTER A KEY
BKSPACE
ENTER
DEFINE
DEF
NUM
00901
Figure 9. Key Define Mode
2. Press a function key you want to configure. If the key is already defined, its assigned function is shown. If not, “Def = NOT DEFINED”
appears on the LCD screen.
3. Select
4. Select
5. Select
6. Select
and/or
to scroll through the list of available functions.
to choose a function.
DEF
NUM
and enter the define number.
.
DEF
NUM
7. Select
and then
.
NOTES:
•
•
Refer to Table A for the factory default settings.
Many of the functions do not require that you enter a define number. In those cases, skip steps 5 and 6.
Table A. Function Key Defaults
Function Key
Default Action
Camera Auxilliary 1
Camera Auxilliary 2
Camera Auxilliary 3
Camera Auxilliary 4
Camera Auxilliary 5
Camera Auxilliary 6
Camera Auxilliary 7
Camera Auxilliary 8
Camera Pattern 1
Camera Pattern 2
Camera Pattern 3
External Relay 1
Function Key
Default Action
Multiplexer
Alarm Menu
Macro Menu
Sequence Menu
GPI Menu
F1
F2
F13
F14
F15
F16
F17
F18
F19
F20
F21
F22
F23
F24
F3
F4
F5
F6
Define Menu
Menu Forward
Menu Backward
Backspace
Enter
F7
F8
F9
F10
F11
F12
Clear
---
NOTE: In the GPI Menu, F1-F8 are associated with the external relays in the current GPI.
EXITING SETUP MODE
1. Select
.
2. Set DIP switch 2 OFF.
16
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This section describes the operation of a CM6800 System using the KBD960 keyboard. Before you begin operating the KBD960, make sure you
have completed the following:
1. Connections have been made and initial power-up has been completed.
2. CM6800 setup files have been programmed.
3. PINs have been set up to allow logging on, access to the setup functions, and access to the Define Menu.
You must also have the following information:
•
•
•
•
•
•
The logical camera number list, complete with identification names
The logical monitor number list, complete with identification names
A list of all macros
A list of all peripheral devices connected
A list of alarms connected to the system
A list of presets for each relevant camera
LOGGING ON
1. Set all DIP switches OFF.
KEYBOARD 960 vX.XX
Enter Monitor
00902
Figure 10. Logon Screen
2. Enter the monitor number and press
.
LOGGING OFF
1. Select
.
.
LOG
OFF
2. Select
1
Logoff?
1
YES
NO
00903
Figure 11. Logoff Screen
YES
3. Select
.
The keyboard goes offline for a short while before returning to the “Keyboard 960” display.
C1519M-E (6/06)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE KBD960 MENUS
1. Set DIP switch 2 OFF.
2. Enter the number of the monitor and then press
.
3. Press
and the Main Menu 1 icons appear.
1
1
LOG
OFF
MUX
GPI
PRST
00904
Figure 12. Main Menu 1
Table B. Main Menu 1
Select to bring up the Monitor Menu. If you enter a number before selecting this icon, the
monitor number changes to that number.
Select to bring up the Camera Menu. If you enter a number before selecting this icon, the camera
number changes and the camera switches on the current monitor without going into the Camera
Menu.
Select to bring up the MUX Menu. You can enter a number before selecting this icon. If you enter
a number before selecting this icon, the multiplexer number changes and the system switches to
that multiplexer without going into the MUX Menu.
MUX
When an alarm is triggered, this icon appears on the keyboard screen. The current alarm shown
on the user monitor is the alarm that appears when the Alarm Menu is selected.
Select to bring up the GPI Menu. If you enter a GPI number before selecting this icon, control and
data information are requested for the selected GPI.
GPI
Select to bring up the Preset Menu. If you enter a number before selecting this icon, the preset is
called without the Preset Menu being displayed.
PRST
Select to bring up the next page (Main Menu 2).
Select to log off the system.
LOG
OFF
1
1
MAC
SEQ
DEF
00905
Figure 13. Main Menu 2
18
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table C. Main Menu 2
Select to bring up the Macro Menu. If you enter a macro number before selecting this icon, the
selected macro plays without having to go into the Macro Menu.
MAC
SEQ
Select to bring up the Sequence Menu. If you enter a sequence number before selecting this
icon, the selected sequence plays without going into the Sequence Menu.
PIN
LCD
Select to bring up Define Menu 1. You will see
and
. Enter your define PIN. You will
not have to re-enter your define PIN unless the keyboard goes offline or you log off. When you
DEF
LCD
enter your PIN, Define Menu 2 appears. You will also see
in Define Menu 2. You can
adjust the display brightness in Define Menu 1 or Define Menu 2.
or
Selecting either one returns you to Main Menu 1.
1
1
00906
Figure 14. Monitor Menu
Table D. Monitor Menu
Select to request the previous logical monitor number in the system and to grant control of the
monitor if it is available. The logical monitor number range is 1-9999.
Select to request the next logical monitor number in the system and to grant control of the
monitor if it is available. The logical monitor number range is 1-9999.
This icon indicates whether or not you have control of the monitor. A highlighted icon means you
have control. Select this icon to request or release control of the selected monitor. If you enter a
number before selecting this icon, the keyboard requests control of that monitor.
Reserved for future use.
Select this icon to return to Main Menu 1.
1
1
1
2
00907
Figure 15. Camera Menu 1
C1519M-E (6/06)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Table E. Camera Menu 1
Select to request the previous logical camera number in the system and grant control if it is
available.
Select to request the next logical camera number in the system and grant control if it is available.
Select to run a selected pattern.
This icon shows whether or not you have control of the selected camera. A highlighted icon
means you have control. Select this icon to request or release control of the selected camera.
If you enter a number before selecting this icon, the keyboard requests control of that camera.
Select to send an AUX 1 set command to the selected camera. When you release the key, a clear
command is sent.
1
2
Select to send an AUX 2 set command to the selected camera. When you release the key, a clear
command is sent.
Select to bring up Camera Menu 2.
Select to return to Main Menu 1.
1
1
5
3
4
6
7
8
00908
Figure 16. Camera Menu 2
Table F. Camera Menu 2
Select to send an AUX 3 set command to the selected camera. When you release the key, a clear
command is sent.
3
4
5
6
7
8
Select to send an AUX 4 set command to the selected camera. When you release the key, a clear
command is sent.
Select to send an AUX 5 set command to the selected camera. When you release the key, a clear
command is sent.
Select to send an AUX 6 set command to the selected camera. When you release the key, a clear
command is sent.
Select to send an AUX 7 set command to the selected camera. When you release the key, a clear
command is sent.
Select to send an AUX 8 set command to the selected camera. When you release the key, a clear
command is sent.
or
Select to return to Camera Menu 1
20
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
MUX
MUX
00909
Figure 17. MUX Menu 1
Table G. MUX Menu 1
Select to request the previous logical multiplexer number in the system and grant control of the
multiplexer if it is available.
Select to request the next logical multiplexer number in the system and grant control of the
multiplexer if it is available.
This icon shows whether or not you have control of the selected multiplexer. A highlighted icon
means you have control. Select this icon to either request or release control of the selected
multiplexer. If you enter a number before selecting this icon, the keyboard requests control of
that multiplexer.
MUX
Select to send a MUX TAPE command to the selected multiplexer.
Select to send a MUX LIVE command to the selected multiplexer.
Select to send a MUX ZOOM command to the selected multiplexer. If you enter a number before
selecting this icon, the command sent to the multiplexer becomes a MUX SWITCH CHANNEL
command to the specified channel.
Select to bring up MUX Menu 2.
Select to return to Main Menu 1.
1
1
MUX
00910
Figure 18. MUX Menu 2
C1519M-E (6/06)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Table H. MUX Menu 2
Select to send a MUX PIP command to the selected multiplexer.
Select to send a MUX 4-camera command to the selected multiplexer.
Select to send a MUX 9-camera command to the selected multiplexer.
Select to send a MUX 16-camera command to the selected multiplexer.
Select to bring up MUX Menu 1.
Select to return to Main Menu 1.
1
1
00911
Figure 19. Alarm Menu
Table I. Alarm Menu
Select to request the previous triggered logical alarm number in the system. The CM6800 matrix
interprets this command as a Previous Alarm Step.
Select to request the next triggered logical alarm number in the system. The CM6800 matrix
interprets this command as a Next Alarm Step.
Select to turn off the alarm siren of the keyboard.
Select to send an ALARM RESET command for the currently displayed alarm.
Select to send an ALARM RESET ALL command. The CM6800 matrix interprets this command as
a Reset Current Alarm on all monitors.
Select to pause an alarm that has been triggered.
Select to return to Main Menu 1.
1
1
GPI
GPI
MTRY
1
2
3
4
00912
Figure 20. GPI Menu 1
22
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table J. GPI Menu 1
Select to set the current GPI to the input value. Select to request control of the selected GPI and
send a message to gather information about the status of the auxiliaries within the GPI. You have
control if this icon is highlighted.
GPI
If this icon is highlighted, the auxiliary control method is momentary. If it is not highlighted, the
auxiliary control method is latching. In momentary mode, selecting the icon sends an AUX ON
command and releasing the key sends an AUX OFF command. The latching mode disables the
AUX OFF command from being sent when the key is released. In latching mode, you can specify a
number up to 6553 and then press the auxiliary number to set the auxiliary and have it unlatch at
the specified time (1-6553 in seconds). If you do not enter a number, the auxiliary latches until an
AUX OFF command is sent. You can issue an AUX OFF command by placing the keyboard in MTRY
(momentary) mode again and pressing the key (when the key is released an AUX OFF is sent and
the AUX ON when pressing the key is ignored).
MTRY
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
1
2
3
4
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to bring up GPI Menu 2.
Select to return to Main Menu 1.
1
1
GPI
5
6
7
8
00913
Figure 21. GPI Menu 2
C1519M-E (6/06)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Table K. GPI Menu 2
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
5
6
7
8
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to return to GPI Menu 1.
Select to return to Main Menu 1.
1
1
PRST
PRST
00914
Figure 22. Preset Menu
Table L. Preset Menu
PRST
Select to send a PRESET CALL command to the current camera.
Select to send a PATTERN START command to the current camera. You can enter a number to
initiate a specific pattern.
Select to send a ZONE SCAN ON command to the current camera and display the “Zone On”
text. When this text is displayed, you can select this icon again to send a ZONE SCAN OFF
command, which displays the “Zone Off” text.
Select to return to Main Menu 1.
1
1
MAC
MAC
00915
Figure 23. Macro Menu
24
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table M. Macro Menu
Select to request the previous logical macro number in the system and grant control of the macro
if it is available.
Select to request the next logical macro number in the system and grant control of the macro if it
is available.
This icon shows whether or not the user has control of the selected macro. If the icon is
highlighted, you have control. Select this icon to either request or release control of the selected
macro. If you enter a number before selecting this icon, the keyboard requests control of that
macro.
MAC
Select to start or stop a macro.
Select to start or stop a macro.
Select to send a stop command to the selected macro.
Select to send a MACRO PAUSE command to the selected macro.
Select to return to Main Menu 1.
1
1
SEQ
SEQ
00916
Figure 24. Sequence Menu
Table N. Sequence Menu
Select to request the previous logical sequence number in the system and grant control of the
sequence if it is available.
Select to request the next logical sequence number in the system and grant control of the
sequence if it is available.
This icon shows whether or not you have control of the selected sequence. If the sequence is
highlighted, you have control. Select this icon to request or release control of the selected
sequence. If you enter a number before selecting this icon, the keyboard will request control of
that sequence number.
SEQ
Select to send a SEQ PLAY BWD command to the selected sequence.
Select to send a SEQ PLAY FWD command to the selected sequence.
Reserved for future use.
Reserved for future use.
Select to return to Main Menu 1.
C1519M-E (6/06)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
PIN
PIN
LCD
00917
Figure 25. Define Menu 1
Table O. Define Menu 1
Enter your PIN to bring up Define Menu 2. Define Menu 2 appears automatically if you have
already entered your PIN. You will not have to re-enter your PIN unless the keyboard goes offline
or you log off.
PIN
LCD
Select to adjust the LCD display brightness.
1
1
DEF
PRST
LCD
MENU
00918
Figure 26. Define Menu 2
Table P. Define Menu 2
PRST
Select to enter the Define Preset Menu.
Select to enter the Define Zone Menu.
Select to enter the Setup LCD Menu.
LCD
Select to send a start pattern programming command to the current camera. A highlighted
pattern symbol appears. Selecting pattern again stops the command and the pattern symbol
becomes normal.
MENU
Select to bring up the Programming Menu.
Select to bring up the Database Menu.
Select to return to Main Menu 1.
26
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
DEF
PRST
PRST
DEL
00919
Figure 27. Define Preset Menu
Table Q. Define Preset Menu
Select to send a set preset command and a preset label to the current camera.
A preset number is required prior to selecting this icon.
PRST
DEF
Reserved for future use.
Select to return to the Define Menu.
ˆ
1
1
DEF
00920
Figure 28. Define Zone Menu
Table R. Define Zone Menu
Select to send a set zone command to the current camera.
Select to return to the Define Menu.
1
1
LCD
00921
Figure 29. Setup LCD Menu
C1519M-E (6/06)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Table S. Setup LCD Menu
Select to make the display brighter.
Select to make the display dimmer.
Select to save your settings.
Select to return to the Define Menu.
1
1
DEF
MENU
PGM
00922
Figure 30. Programming Menu
Table T. Programming Menu
Select to send a MENU ITEM DOWN command to the system master.
Select to send a MENU ITEM UP command to the system master.
Select to send a MENU ITEM LEFT command to the system master.
Select to send a MENU ITEM RIGHT command to the system master.
Select to increase the current item.
Select to decrease the current item. Enter a number and select this icon to set the editing field.
Select to display the program menu on your monitor.
PGM
Select to return to the Define Menu.
DEF
00923
Figure 31. Database Menu
28
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table U. Database Menu
Select to send the keyboard’s key configuration to another keyboard. You must enter the local
device address of the second keyboard. This is only sent to a device on the same bus as the
keyboard.
Select to receive another keyboard’s key configuration database. You must enter the local device
address of the second keyboard. This is only sent to a device on the same bus as the keyboard.
Select to return to the Define Menu.
SENDING/RECEIVING KEYBOARD SETUPS
You can set up only one KBD960 keyboard and send the information to another keyboard. You can also receive the setup information from a
connected keyboard.
The COM ports are located on the bottom of the keyboard.
Follow these steps to send or receive setup information between keyboards:
1. Select
2. Select
from Define Menu 2 to bring up the Database Menu. See Figure 31.
to send setup information to a connected keyboard.
“Sending Data” appears on the LCD. “Key Data Sent” appears on the LCD when the transfer is complete.
or
Select
to receive setup information from a connected keyboard.
“Receiving KeyDefs” appears on the LCD. “Keys Uploaded” appears on the LCD when the transfer is complete.
NOTES:
•
•
COM 3 is RS-232 and is only used for sending/receiving settings between keyboards. It is not used for normal operation.
To send/receive setup information, all KBD960 keyboards must be connected to the M bus. However, each keyboard must have a unique
local M device address.
C1519M-E (6/06)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE CM6800 MAIN PROGRAMMING MENU
1. Select
.
DEF
2. Enter your Define PIN.
3. Select
4. Select
.
MENU
. The following screen appears on your monitor.
PGM
PELCO VIDEO SWITCHER
MODEL CM6800
PASSWORD TO MAIN MENU
*******
SCRATCHPAD SEQUENCE
RETURN
00619
Figure 32. Password Screen
5. Enter your password (default is 2899100). The Main Programming Menu appears.
PELCO SWITCHER
MODEL CM6800
MAIN MENU
1
2
3
4
5
6
7
8
9
CAMERA
LOGICAL CAMERA
MONITOR
ACCESS
TIME & DATE
PORT
PRIORITY
SEQUENCE
MACRO
10 ALARM CONTACTS
11 EVENT TIMER
12 SET AUXILIARY MENU
13 SET PASSWORD
14 ABOUT CM6800
ENGLISH
RETURN
00924
Figure 33. Main Programming Menu
Refer to the CM6800 Installation/Operation Manual for detailed instructions on setting the various items on the Main Programming Menu.
DIAGNOSTIC MODE
To activate the Diagnostic Mode set DIP switch 1 ON. This mode allows the following tests:
•
•
•
•
LCD test
Keyboard test
Serial Input/Output (SIO) test
DIP Switch test
DIAGNOSTIC MODE vX.XX
00925
Figure 34. Diagnostic Mode Menu
30
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
TESTING THE DISPLAY
1. Select
2. Select
3. Select
4. Select
5. Select
6. Select
while in the Diagnostic Mode.
to test graphic page 0.
to test graphic page 1.
to test graphic page 2.
to test the text page.
G0
G1
G2
T0
.
LCD TEST
G2
G0
G1
T0
00926
Figure 35. LCD Test
TESTING THE KEYBOARD
NOTE: If the software running on the KBD960 is v1.20 or later, then DIP switch 3 is used to indicate whether or not the software is taking
A-to-D readings from the zoom axis of the joystick. If DIP switch 3 is OFF, you should see three readings (xxx, xxx, xxx) on the keyboard test
screen. If the zoom A-to-D reading (the third reading) changes as you move the zoom top, DIP switch 3 should be OFF. If the zoom A-to-D reading
does not change as you move the zoom top, DIP switch 3 should be ON.
1. Select
2. Press each key to ensure that the display shows the correct key.
3. Select
.
.
NOTE: Version 1.20 and later displays three joystick positions (xxx, xxx, xxx).
I
KEYBOARD TEST vX.XX
P L E A S E E N T E R A K E Y
Joystick Position – (xxx, xxx)
00927
Figure 36. Keyboard Test
C1519M-E (6/06)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
TESTING THE SERIAL PORTS
This test is reserved for factory use only.
SIO TEST
COM1 COM2
COM3
00928
Figure 37. SIO Test
TESTING THE DIP SWITCHES
1. Select
.
2. Beginning with switch 2, set each switch ON while observing the display.
DIPSWITCH TEST
00000001
00929
Figure 38. DIP Switch Test
SELECTING MONITORS
You can select up to eight monitors. There are several ways you can select monitors.
MAIN MENU 1
1. Enter the monitor number (1-8).
2. Press
or select
.
The monitor number appears next to
on the keyboard LCD.
MONITOR MENU
1. Select
from Main Menu 1.
2. Cycle through the available monitors using
You can also enter a monitor number and press
and/or
.
or select
.
32
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION KEY
Follow these steps to select a monitor using F22:
1. Press
.
2. Enter a monitor number.
3. Press F22.
NOTE: F22 is the “enter” default, but you can assign this function to one of the other function keys.
SELECTING CAMERAS
There are also several ways you can select cameras.
MAIN MENU 1
1. Enter a logical camera number (1-9999).
2. Press
or select
. The camera number appears next to
on the keyboard LCD.
CAMERA MENU
1. Select
from Main Menu 1.
2. Cycle through the available cameras using
You can also enter a camera number and press
and/or
.
or select
.
FUNCTION KEY
Follow these steps to select a camera using F22:
1. Press
.
2. Enter a camera number.
3. Press F22.
You can also use
and
to cycle through cameras.
NOTE: F22 is the “enter” default, but you can assign this function to one of the other function keys.
OPERATING PTZ CAMERAS
The controls for PTZ cameras are located on the right-hand side of the keyboard.
The proportional joystick allows variable speed drives. It gives you full control over the pan and tilt movements, from minimum to maximum
speed. Speed is proportional to the amount by which you move the joystick from its center location.
Press
while moving the joystick to enable high speed operation.
The joystick only provides directional control when a fixed speed PTZ camera is installed.
The various functions of a PTZ camera can be controlled as follows:
1. To zoom in or out, use
.
2. To focus near or far, use
3. To open or close the iris, use
.
.
C1519M-E (6/06)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Operation
PRESETS
A preset camera position is a set of parameters which define pan, tilt, zoom, and focus adjustments. There are four ways you can recall a preset
camera position:
•
•
•
•
Manually using the keyboard
Automatically as the result of an alarm condition
From a macro command
From a sequence command
NOTE: Presets are only possible when receivers or pan/tilt units have preset capability.
CREATING PRESETS
There are 64 available presets. For example, follow these steps to create Preset 1:
1. Move the joystick to the desired position.
2. Select
3. Select
from Main Menu 2. Refer to Table C.
to bring up the Preset Menu.
DEF
PRST
4. Enter 1 and select
. “PROGRAMMING PRESET 01 ENTER PRESET LABEL” appears on the monitor.
PRST
5. Press
to scroll through the alphanumeric characters. Each preset label can have up to 20 characters. Move the joystick to the
right to set each character.
6. Move the joystick to SET and then to the right.
NOTE: You are asked for your PIN only when you access the Define Menu for the first time after logon.
RECALLING PRESETS
Follow these steps to recall the preset you created:
1. Go to Main Menu 1.
2. Enter 1.
3. Select
or press
. The camera moves to the preset position and the preset label appears on the monitor.
PRST
DELETING PRESETS
Follow these steps to delete the preset you created above:
1. Select from Main Menu 2.
DEF
2. Enter 1 and select
. “PROGRAMMING PRESET 01 ENTER PRESET LABEL” appears on the monitor.
PRST
3. Move the joystick down to DELETE and then to the right.
34
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
PATTERNS
A pattern is a user-defined, viewable camera path with a definite beginning and end. You must create a pattern before the time-out clock expires.
For example,‚ the timer is 60 seconds. If you are using a Spectra II®‚ the timer is 1.5, 3, or 6 minutes. (See the section on Pattern Length.) You will
not see the time-out clock on the monitor.
CREATING PATTERNS
1. Move the joystick to a desired starting point.
2. Select
3. Select
from Main Menu 2. Refer to Table C.
DEF
. The icon becomes highlighted and “PROGRAMMING PATTERN” appears on the monitor.
4. Move the joystick to a desired end point before time-out.
5. Select again to save the pattern. The icon returns to normal.
NOTE: Your pattern can be the same length as the time-out clock, or it can be less than the time-out clock.
Figure 39 shows a viewing area within which pattern definition can take place. The line segment shows one of many paths along which a pattern
definition can be created.
PRESSING THE
BUTTON AT
POINT D OR AT ANY INTERMEDIATE
POINT ENDS PATTERN DEFINITION
JOYSTICK TO POINT A,
PRESS THE BUTTON
TO START PATTERN
DEFINITION
VIEWABLE AREA
B
C
D
A
MONITOR
CAMERA
JOYSTICK
CONTROL
00930
Figure 39. Pattern Definitions
C1519M-E (6/06)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
PATTERN LENGTH
You can set three time values for single pattern lengths and three corresponding time values for two half-pattern lengths from the Esprit™
Programming Menu. The single pattern lengths are 1.5 minutes, 3 minutes, and 6 minutes. The corresponding half-pattern lengths are
0.75 minutes, 1.5 minutes, and 3 minutes.
Follow these steps to bring up the programming menu:
1. Go to Define Menu 2. Refer to Table C.
2. Enter 95 and press the Prst side of
.
The monitor displays the Preset Label Menu. The Programming Menu appears when you click Set.
3. Perform the steps in Table V.
NOTE: If the Esprit programming menu shows no choices for pattern creation, then you have early models and are limited to creating and
running patterns based on the time values of 60 seconds for full and 30 for half-patterns. Intercept® equipment also uses 60 seconds for a full
pattern and 30 seconds for half-patterns.
Table V. Esprit Programming Menu
1. Move the joystick to position the cursor beside Other.
2. Press the Open side of
3. Position the cursor beside Pattern Length.
4. Press the Open side of
to enter the submenu.
.
5. Scroll through the available pattern lengths (1.5, 3, or 6). For two half-patterns of 0.75 minutes each, select 1.5;
for two half-patterns of 1.5 minutes each, select 3; and for two half-patterns of 3 minutes each, select 6.
6. Press the Open side of
to make your time selection.
7. Exit the menu.
STARTING PATTERNS
1. Select
from Main Menu 1.
PRST
2. Select
. “RUNNING PATTERN” appears on the monitor. The pattern runs from start to finish, returns to its start position, and
begins again.
STOPPING PATTERNS
Move the joystick to stop a running pattern.
36
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
ZONES
A zone is a user-defined space to which a label is attached and a camera is associated. The camera used at the time the zone boundaries are
defined is associated with the zone. The zone label appears on the selected monitor after zone definition if you move the camera within the
defined zone. You can define and associate up to eight zones with the same camera. A priority level (1-8, with 8 being the highest) is assigned to
each zone.
RULES TO FOLLOW WHEN CREATING ZONES
You must remember these points before you create a zone:
•
•
Always move the joystick so that camera movement is from left to right. Refer to Figure 40.
If you create eight equally spaced zones for a single camera, it would include an entire circle and each zone would cover an angular
distance of about 45 degrees (if camera/receiver configuration and site geometry allow).
•
•
•
Name each defined zone so that each zone priority can be easily identified.
Plan physical placement and associated priority levels ahead of time if you anticipate creating many zones for a camera.
You must assign a priority level (1-8) before you create a zone. Priority levels are hierarchical and are only relevant when multiple zones are
being created.
CREATING ZONES
NOTE: To create zones when using Spectra III cameras, you must enable the zone label display in the Spectra III menus.
1. Move the joystick to Point A
2. Select
3. Select
from Main Menu 2 and enter your PIN, if necessary.
DEF
.
4. Enter a zone priority level (1-8) and select
again. The icon becomes highlighted signaling the start of zone creation. “Edit label.
Ack-set for left edge. Pan right. Press 81 & F5 for right edge.” appears on the monitor.
5. Press
to scroll through the alphanumeric characters. Each zone label can have up to 20 characters. Move the joystick to the
right to advance to the next character.
6. Move the joystick to SET and then to the right. The zone label appears on the monitor.
7. Move the joystick to Point B. You should move the joystick from left to right only.
8. Enter the priority level again and select
. The icon returns to normal.
Repeat these steps if you want to create additional zones.
C1519M-E (6/06)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
If you move the associated camera through the area defined by the zone (approaching the zone edges from either direction), the zone label
appears on the selected monitor as you enter the zone and disappears as you exit the zone. Refer to Figure 40.
00931
Figure 40. Basic Zone Creation
PARTIAL ZONE OVERLAP
Partial zone overlap occurs when the end of one zone overlaps with the beginning of another zone. The zone with the highest priority level
appears at all times. Refer to Figure 41.
ZONE B
ZONE A
ENDS
ZONE A
BEGINS
BEGINS
ZONE B
ENDS
THIS PORTION OF
ZONE B DOES NOT
APPEAR BECAUSE
ZONE A OVERLAPS
IT AND HAS A HIGHER
PRIORITY LEVEL.
ZONE A
PRIORITY 5
ZONE B
PRIORITY 2
THE REMAINDER OF
ZONE B DOES APPEAR.
00932
Figure 41. Partial Zone Overlap
38
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
EMBEDDED ZONES
An embedded zone is a zone that is between two other zones. In Figure 42, Zone C is embedded between Zone A and Zone B.
An embedded zone is not seen unless its priority level is higher than the priority level of the other zones. Since Zone C has a priority level of 6,
portions of Zone A and Zone B are not seen.
ZONE A
ZONE B
BEGINS
ZONE C
ENDS
ENDS
ZONE C
BEGINS
ZONE B
ENDS
ZONE A
BEGINS
ZONE C
PRIORITY 6
ZONE B
ZONE A
PRIORITY 5
PRIORITY 2
ZONE A
ZONE C
ZONE B
RESULT
00933
Figure 42. Embedded Zones
TURNING ZONES ON AND OFF
Follow these steps to turn zones on and off:
1. Select
2. Select
3. Select
from Main Menu 1 to bring up the Preset Menu.
PRST
. “ZONES OFF” or “ZONES ON” appears.
again to either turn the zones off or on.
ERASING ZONES
1. Select
2. Select
from Main Menu 2.
DEF
.
3. Enter the priority level of a zone you want to erase and select
4. Move the joystick down and select SET. The zone is erased.
again.
Repeat these steps to erase other zones. You can also use these steps to start over should you make a mistake during zone creation.
NOTE: DO NOT pan left or right while erasing zones.
C1519M-E (6/06)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MACROS
A macro is a sequence of commands or steps. When you run a macro, the steps programmed into that macro are performed. Macros can be run
manually or automatically. Automatic operation can be the result of alarms or the reaching of specific times and dates.
If you want to start a macro, make sure no other keyboard has control of the PTZ on the monitor that you want the macro to start on.
When a macro completes all its steps, it stops and only runs again if restarted. A continuous macro runs until you clear it or stop it.
To set up a macro, you must bring up the CM6800 Programming Main Menu from the KBD960 or use the CM6800-MGR Program Manager.
STARTING MACROS
There are two ways you can start a macro. For example, follow these steps to start macro number 1:
1. Go to Main Menu 2.
2. Select
3. Select
4. Select
.
MAC
or
or
to scroll to macro number 1.
to start the macro.
or
1. Go to Main Menu 2.
2. Enter 1.
3. Select
.
MAC
STOPPING MACROS
There are two ways you can stop a macro. Follow these steps to stop macro number 1:
1. Go to Main Menu 2.
2. Enter 1.
3. Select
.
MAC
or
1. Go to the Macro Menu.
2. Select
or
to scroll to macro number 1.
3. Select either
,
, or
.
40
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
PAUSING MACROS
Follow these steps to pause macro number 1:
1. Go to Main Menu 2.
2. Select
3. Select
4. Select
5. Select
.
MAC
or
to scroll to macro number 1.
to pause the macro.
again to restart the macro.
SEQUENCE
You can select up to 16 sequences. Camera number and title, sequence status, and time/date appear on the monitor when you select a
sequence.
To set up a sequence, you must bring up the CM6800 Programming Main Menu from the KBD960 or use the CM6800-MGR Program Manager.
There can be 72 steps in a sequence. A sequence can consist of various commands (patterns, presets, random scan, frame scan, stop scan) and
auxiliaries (global auxiliary on/off or camera auxiliary on/off).
STARTING SEQUENCES
You can start a sequence from Main Menu 2 or from the Sequence Menu:
1. Go to Main Menu 2.
2. Enter a sequence number (1-16).
3. Select
.
SEQ
or
1. Go to the Sequence Menu.
2. Select
3. Select
or
or
to scroll through available sequences.
.
STOPPING SEQUENCES
There are two ways to start a sequence:
1. Go to the Sequence Menu.
2. Select
3. Select
or
.
to scroll to the sequence number.
or
Enter a camera number.
C1519M-E (6/06)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
PAUSING SEQUENCES
1. Go to Main Menu 2.
2. Select
3. Select
4. Select
5. Select
.
SEQ
or
to scroll to the sequence number.
to pause the sequence.
again to restart the sequence.
OPERATING RELAYS
To operate relays from a KBD960 keyboard, you must know which GPI to call and which auxiliary (AUX) to select on the keyboard.
You can cascade two relay units. Each relay unit has eight GPIs. Relay Unit 1 has a GPI range of 1-8, and Relay Unit 2 has a GPI range of 9-16.
Refer to Tables W and X.
There are two ways you can operate relays from the KBD960.
ACTIVATING RELAYS USING F12
Follow these steps to activate a momentary relay:
1. Go to Main Menu 1.
2. Enter a logical relay contact number (1-128).
3. Press F12.
A momentary relay does not remain on. Only a latched relay remains on. If you want a latched relay, you must activate it from the GPI menus.
ACTIVATING RELAYS FROM THE GPI MENUS
You can activate relays from the GPI menus as momentary or latching. A momentary relay goes on briefly and then turns off. A latched relay
remains on until you turn it off.
NOTE: You will hear a brief click from the relay unit whenever you activate a momentary or latching relay contact.
Momentary
To activate relay contact 4, for example, follow these steps:
1. Go to Main Menu 1 and enter 1 (GPI). GPI 1 is associated with relay contact 4. Refer to Table C.
2. Select
to bring up GPI Menu 1. This menu displays auxiliaries 1-4. Make sure
is highlighted. When
is highlighted, any
MTRY
MTRY
GPI
relay you activate will be momentary.
3. Select
.
4
42
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Latching
To activate the same relay as latching, follow these steps:
1. Go to Main Menu 1 and enter 1 (GPI).
2. Select
3. Select
4. Select
5. Select
to bring up GPI Menu 1.
GPI
so that it is not highlighted. When
. This icon becomes highlighted.
is not highlighted, any relay you activate latches (remains on).
MTRY
MTRY
4
and then the highlighted auxiliary icon to turn off the latched relay.
MTRY
I
Table W. Relay Unit
GPI
1
Relay Contacts
1
2
3
4
5
6
7
8
2
9
10
18
26
34
42
50
58
2
11
19
27
35
43
51
59
3
12
20
28
36
44
52
60
4
13
21
29
37
45
53
61
5
14
22
30
38
46
54
62
6
15
23
31
39
47
55
63
7
16
24
32
40
48
56
64
8
3
17
25
33
41
49
57
1
4
5
6
7
8
Associated AUX
Table X. Relay Unit 2
Relay Contacts
GPI
9
65
73
66
74
67
75
68
76
69
77
70
78
71
79
72
80
10
11
81
82
83
84
85
86
87
88
12
89
90
91
92
93
94
95
96
13
97
98
99
100
108
116
124
4
101
109
117
125
5
102
110
118
126
6
103
111
119
127
7
104
112
120
128
8
14
105
113
121
1
106
114
122
2
107
115
123
3
15
16
Associated AUX
NOTE: In Relay Unit 2, GPI’s 9-16 are associated with the physical relays (1-64) on the back of the unit. However, GPI’s 9-16 are also associated
with logical relays 65-128. For example, the physical relays for GPI 9 are 1-8 and the logical relays are 65-72.
An REL2064 relay unit set for GPI 1 overlaps with the internal relays on the CM6800. Auxiliary commands sent to external relays 1-3 also operate
the internal relays on the CM6800. You can set the relay range of the REL2064 higher if you want to avoid overlapping the external relays with
internal relays 1-3.
If you press F12 on the keyboard, auxiliary commands are sent to the CM6800 and operate the internal relays of the CM6800, as well as external
relays.
Auxiliary commands sent from the GPI Menu go directly to the REL2064 to control the external relays only. However, if an REL2064 relay unit is
not set for GPI 1, auxiliary commands sent from the GPI menu operate the CM6800 relays.
C1519M-E (6/06)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTIPLEXER CONTROL
You can also control multiplexers with the KBD960 keyboard. You can connect multiplexers to any input.
Refer to the CM6800 Installation/Operation Manual for instructions on setting the multiplexers for keyboard control.
Follow these steps to control multiplexers:
1. Enter a MUX input number and press
. Each MUX input is associated with a camera input. Figure 43 shows MUX 1 being controlled.
2. Select
. MUX Menu 1 appears.
should be highlighted, which means you have MUX control.
MUX
MUX
3. Cycle through the 16 picture inserts (if you have a 16-channel multiplexer) by entering the camera number and selecting
.
4. Select
again to zoom into the MUX camera. You can move the joystick to view a specific area.
5. Select
to bring up MUX Menu 2. The icons for a picture-in-picture display, 4-camera display, 9-camera display, and 16-camera
display appear.
6. Select
selecting
to view four of the available 16 cameras on one monitor. You can cycle through all 16 cameras, four at a time, by repeatedly
.
7. Select
to view nine of the available 16 cameras on one monitor. Select again to see the remaining seven cameras.
8. Select
to view all 16 available cameras on one monitor.
does not work on a 9-channel multiplexer.
NOTE:
1
1
LOG
OFF
MUX
GPI
PRST
00934
Figure 43. MUX Control Menu
44
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO LOSS
The loss of a video signal may alert you or trigger an alarm. The alarm is reported back to the keyboard. Using the video loss function, faulty
cameras can be disabled if necessary.
ALARMS
Alarms can be armed or disarmed from the KBD960 keyboard using the System 6800 menus.
RESETTING TRIGGERED ALARMS
A triggered alarm causes a continuous tone. The alarm volume can be altered using the level control on the bottom of the keyboard.
You cannot turn on an alarm that has been muted. It stays muted until all alarms on the current monitor are cleared or the user switches
monitors. This alerts all operators who have access to the alarm.
Table Y. Triggered Alarm Functions
Flashing
with number
This means the specific alarm number has been triggered.
Select this icon to mute the triggered alarm.
Select to reset the triggered alarm.
Select to reset all triggered alarms. This does not reset all alarms in CM6800.
Select this icon to pause a triggered alarm.
C1519M-E (6/06)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
LOG
OFF
4-CAMERA
MUX
LOG
OFF
JOYSTICK
ADJUST
JSTK
ADV
AUX 4, RELAY 4
AUX 5, RELAY 5
AUX 6, RELAY 6
AUX 7, RELAY 7
AUX 8, RELAY 8
4
5
6
7
8
LOG OFF
YES
ADVANCE
MENUS
9-CAMERA
MUX
YES
NO
LOG OFF
NO
SERIAL PORT
TEST
16-CAMERA
MUX
SETUP/DEFINE
PIN
SEND KEYBOARD
SETUP
LIVE
MUX
PIN
SAVE
SELECTION
RECEIVE KEYBOARD
SETUP
MUX
CAMERA CONTROL
RESET
ALARM
TEST GRAPHIC
PAGE 0
SEQUENCE
MENU
DEL
G0
G1
G2
T0
DELETE
SEQ
CAMERA
PRESET
MORE
MENU
RESET
ALL ALARMS
TEST GRAPHIC
PAGE 1
PRST
TEST GRAPHIC
PAGE 2
MUTE
EXIT
PATTERN
ZONE
CAMERA
SELECTION
TEST TEXT
PAGE 0
ALARM
MONITOR
SELECTION
DEFINE
MENU
GPI
MENU
GPI
MTRY
MAC
DEF
PARITY
SCROLL UP
SCROLL FIELD UP
RELAY
MOMENTARY
DIP SWITCH
TEST
PROGRAM
MENU
PGM
SCROLL DOWN
SCROLL FIELD DOWN
MACRO
SELECT
DISPLAY
BRIGHTNESS
DEFINE
NUMBER
DEF
NUM
LCD
PLAY FWD
SCROLL RIGHT
DEVICE
PAUSE
MENU
MENU
COM1
COM2
COM3
COM PORT 1
PLAY BWD
SCROLL LEFT
COM PORT 2
STOP
SCROLL OPTION
UP
MUX
MENU
COM PORT 3
MUX
SCROLL OPTION
DOWN
TAPE
MUX
AUX 1, RELAY 1
AUX 2, RELAY 2
AUX 3, RELAY 3
1
2
3
KEYBOARD
SELECT
ZOOM
MUX
KEYBOARD
KEY TEST
PIC IN PIC
MUX
Figure 44. Icons Legend
46
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTER SETUP PIN
SETUP MODE vX.XX
JSTK
LCD
ADV
Advance Setup 1
None (Host)
NOT DEFINED
NUMx
ESC
BKSPACE
ENTER
DEFINE
KEY DEFINE
COM1
COM2
COM3
Local Address
PLEASE ENTER A KEY
None
None
1
DEF
NUM
JOYSTICK SETUP
Advance Setup 2
Setup Pin ****
xxx
(xxx, xxx)
xxx
Confirm ****
Define Pin ****
Confirm ****
xxx
xxx
DEF
NUM
LCD BRIGHTNESS SETUP
00936
Figure 45. Setup Mode Menu Tree (DIP Switch 2 ON)
C1519M-E (6/06)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGNOSTIC MODE vX.XX
LCD TEST
G2
T0
G0
G1
DIAGNOSTIC MODE vX.XX
KEYBOARD TEST vX.XX
P L E A S E E N T E R A K E Y
Joystick Position – (xxx, xxx)
DIAGNOSTIC MODE vX.XX
SIO TEST
COM1 COM2
COM3
DIAGNOSTIC MODE vX.XX
DIPSWITCH TEST
00000001
00937
Figure 46. Diagnostic Mode Menu Tree (DIP Switch 1 ON)
48
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN MENU 1
LOGOFF MENU
1
1
MAIN MENU 2
1
Logoff?
1
1
1
LOG
OFF
MUX
GPI
PRST
YES
NO
PRESET MENU
MAC
SEQ
DEF
1
1
PRST
MACRO MENU
PRST
1
1
MAC
GPI MENU 1
1
1
MAC
GPI
CAMERA MENU 1
SEQUENCE MENU
GPI
MTRY
1
2
3
4
1
1
1
1
1
SEQ
GPI MENU 2
1
1
SEQ
1
2
GPI
DEFINE MENU 1
CAMERA MENU 2
5
6
7
8
1
1
1
PIN
PIN
ALARM MENU
1
1
LCD
3
4
5
6
7
8
DEFINE MENU 2
MONITOR MENU
1
1
1
1
MUX MENU 1
DEF
1
1
MUX
PRST
LCD
MENU
MUX
MUX MENU 2
DEFINE
PRESET MENU
1
1
MUX
1
1
DEF
PRST
PRST
DEL
DEFINE ZONE MENU
1
1
1
DEF
SETUP LCD MENU
1
LCD
PROGRAMMING MENU
1
1
DEF
MENU
PGM
DATABASE MENU
DEF
00938
Figure 47. Operation Mode Menu Tree (DIP Switch 2 OFF)
C1519M-E (6/06)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
ELECTRICAL
Input Voltage
100-240 VAC, 50/60 Hz
10 watts
Power Consumption
Communications
Operating Distance
Connectors
RS-485
4,000 feet (1,219 m) on 24 AWG wire
Two 8-pin, RJ-45 connectors (female); RS-485 serial ports
One 4-pin, RJ-45 connector (female); RS-232 serial (diagnostic) port
Two 6-pin RJ-45 connectors (female) not used
OPERATIONAL
Joystick
Proportional
Display
Four-line, backlit LCD for programming and control
Eight icon keys for LCD menu selection
Ten-key numeric keypad with two additional keys for camera and monitor selection
Twenty-four function keys
LCD Menu Display
Numerical Input
Function Keys
Control Keys
Lens Keys
Six keys for control of various functions
Three keys for zoom, iris, and focus control
GENERAL
Operating Temperature
32° to 120°F (0° to 49°C)
Dimensions
KBD960
15.5 (W) x 3.3 (H) x 7.8 (D) inches
(39.45 x 8.38 x 19.81 cm)
KBR960
6.96 (W) x 1.27 (H) x 19.00 (D) inches
(17.68 x 3.23 x 48.26 cm)
Unit Weight
KBD960
4.59 lb (2.08 kg)
6.40 lb (2.90 kg)
KBR960
50
C1519M-E (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or
workmanship for a period of one year after the date of shipment.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following
information:
Exceptions to this warranty are as noted below:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
•
Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted
pair transmission products.
•
•
Three years on Genex® Series products (multiplexers, server, and keyboard).
If there is a dispute regarding the warranty of a product which does not fall under the
warranty conditions stated above, please include a written explanation with the product
when returned.
Three years on Camclosure® and fixed camera models, except the CC3701H-2,
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,
which have a five-year warranty.
Method of return shipment shall be the same or equal to the method by which the item was
received by Pelco.
•
•
•
Three years on PMCL200/300/400 Series LCD monitors.
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series
fixed dome products.
Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, including when used in
continuous motion applications.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned
for credit, and RA number if returned for repair).
•
•
•
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays.
The lamp and color wheel will be covered for a period of 90 days. The air filter is not
covered under warranty.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.
•
•
•
Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura™ Series distributed network-based video products.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident
are not covered under this warranty.
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are
instructed to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from
the specific use or application made of the Products. Pelco’s liability for any claim, whether
based on breach of contract, negligence, infringement of any rights of any party or product
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for
such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused,
whether by the negligence of Pelco or otherwise.
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
The above warranty provides the Dealer with specific legal rights. The Dealer may also have
additional rights, which are subject to variation from state to state.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
REVISION HISTORY
Manual #
C1519M
C1519M-A
Date
6/01
5/02
Comments
Original version.
Added Models section. Added ferrite information to Installation section. Added Step 5 to Configuring the COM Ports. Revised default function for F9-F11 per
ECO 01-7510. Revised Table M. Added Deleting Presets section. Revised Macros and Sequence sections. Updated Regulatory Notices.
Revised Calibrating the Joystick section per ECO 02-8581 and ECO 02-8394.
Revised manual per ECO 04-10657. Revised first note on page 12. Removed last note on page 12 and revised the Calibrating the Joystick section. Added two notes
on page 27.
C1519M-B
C1519M-C
1/03
8/05
C1519M-D
C1519M-E
3/06
6/06
Revised Models section. Revised list of supplied items. Revised input voltage and power consumption on Specifications
Removed ferrite information from Installation section. Revised manual format.
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.
Endura and ExSite are trademarks of Pelco.
©Copyright 2006, Pelco. All rights reserved.
DLP is a registered trademark of Texas Instruments, Inc.
Lexan is a registered trademark of General Electric Company.
Download from Www.Somanuals.com. All Manuals Search And Download.
Worldwide Headquarters
3500 Pelco Way
Clovis, California 93612 USA
USA & Canada
Tel: 800/289-9100
Fax: 800/289-9150
International
Tel: 1-559/292-1981
Fax: 1-559/348-1120
ISO9001
United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East
|
|
|
|
|
|
|
|
Download from Www.Somanuals.com. All Manuals Search And Download.
|