electronic user's manual
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/manual.html2005-04-08 ¤W¤È 11:19:34
About This Electronic User's Manual
About This Electronic User's Manual
About This Guide
This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes
the monitor's features, setup, operation and all other information, which is the same exact
information described in our printed version.
The sections are as follows:
●
Safety and Troubleshooting Information provides tips and solutions for common problems,
and other related information you may need.
●
●
About This Electronic User's Manual gives an overview of what information are included as
well as notation icon descriptions and other documentation you can refer to.
Product Information gives an overview of the monitor's features and as well as the technical
specifications for this monitor.
●
Installing Your Monitor describes the initial setup process and gives an overview of how to
use the monitor.
●
●
On Screen Display provides information on adjusting the settings on your monitor.
Customer Care and Warranty is a list of worldwide Philips consumer information centers
along with the help desk phone numbers and information on the applicable warranty of your
product.
●
●
●
Glossary provides more information for technical terms.
Download allows users to install the entire manual on their hard drive.
Frequently Asked Questions provides answers to commonly asked questions.
Other Documents You May Need
In addition to this Electronic User's Guide, you may need to refer to the following documentation:
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/ABOUT/ABOUT.HTM (1 of 3)2005-04-08 ¤W¤È 11:19:46
About This Electronic User's Manual
●
Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the
monitor. This is included with this product.
Notational Descriptions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in
italic type. These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: This icon indicates important information and tips that help you make
better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how
to avoid the problem.
SMART HELP: This icon indicates helpful information when adjusting the On
Screen Display of your monitor.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such
cases, the specific presentation of the warning is mandated by regulatory authority.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/ABOUT/ABOUT.HTM (2 of 3)2005-04-08 ¤W¤È 11:19:46
About This Electronic User's Manual
©2005 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or
broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/ABOUT/ABOUT.HTM (3 of 3)2005-04-08 ¤W¤È 11:19:46
107C Product Information
Product Information
Product Features
Model
Regulation
Color
107C63
107C64
TCO'03
TCO'99
Silver/Black
Silver/Black
107C65
TCO'99
Black
107C6
●
●
17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with
MACs and PCs
Autoscan covers horizontal frequencies up to 71 kHz offering a maximum resolution of 1280
x 1024 with flicker free display of 1024 x 768 at up to 89 Hz.
Real Flat High Contrast CRT with high-resolution 0.25 mm dot pitch (0.21 hdp)
LightFrame™ for brightest and sharpest display of movie and photo windows.
Large screen display in a small footprint: 17-inch conventional monitor with maximum depth
of only 424 mm/16.7"
●
●
●
●
●
sRGB for true on screen color representation.
FCC, CE (in selected countries only) and ISO9241, ISO14001 certified
LightFrame™ for Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (1 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
Introduction
Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT
(picture tube) monitor. LightFrame™ will boost the brightness and sharpness of photos and videos
on the monitor screen.
To control the LightFrame™ feature in your monitor, you have to install the LightFrame™ application
which you will find on this CD-ROM.
Note
Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier
Philips monitors or other manufacturers’ monitors will not work with this special software. It is
recommended that you install this software only on a Philips monitor designed to use it. These
monitors can be identified by the LightFrame™ logo on the front of the monitor.
This software is not designed for use with LCD flat screen monitors.
LightFrame™ will work with true Windows-based programs and DOS-based programs that operate
in a Windows environment. It will not work with DOS-based programs operating only in a DOS
environment.
Language Selection
While English is the default language of LightFrame™, the User Interface can be set up to operate
in Dutch, French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese or
Korean.
Installation
1) To install LightFrame™, place the CD in the CD-ROM drive.
2) Next, when the menu of items on the CD appears on your screen, click on 'Install
LightFrame™'.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (2 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
3) Now, follow the on-screen prompts to properly install the program. The software checks to
see if you have a compatible monitor. You must agree to the license agreement terms for the
software to install.
4) After installation, LightFrame™ automatically loads and the icon appears in the taskbar.
Notes
If LightFrame™ detects that your monitor is not LightFrame™ compatible, a message appears on
the monitor screen. If you see this message, you can select to abort or continue the installation.
However, if you continue the installation, LightFrame™ will probably not work on the monitor.
How to use LightFrame™
After installation, LightFrame™ starts up automatically whenever the computer is started.
For information about using LightFrame™ please refer to the help information which is available
after installation.
Compatibility
This version of LightFrame™ is compatible with
Windows® 95
Windows® 98
Windows® Me (Millenium Edition)
Windows® XP
Windows® 2000 Professional Edition.
LightFrame™ 3 -- Frequently Asked Questions (and answers)
LightFrame™
Q: Is LightFrame™ 2 compatible with LightFrame™ 3?
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (3 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
A: No. If you run LightFrame™ 1 or 2 software with a Philips LightFrame™ 3 monitor, nothing
will happen.
Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor.
A:No for a LightFrame™ 1 or 2 monitor you need to use LightFrame™ 1 or 2 software. It is however
possible to use the LightFrame™ 2 software on a LightFrame™ 1 monitor.
Q:What is the difference between LightFrame™ 1, LightFrame™ 2 and LightFrame™ 3?
A:LightFrame™ 1 was the very first generation of the LightFrame™ feature introduced by Philips. In
that version the user needs to manually turn on/off the feature and select the window or area to
apply it to.
LightFrame™ 2 offers the automatic detection in Internet Explorer on top of the LightFrame™ 1
functions. With this feature LightFrame™ will automatically scan a web page in Internet Explorer,
find the largest picture and enhance it.
LightFrame™ 3 offers everything that LightFrame™ 2 has but now with the possibility to enhance
multiple pictures at the same time. So in a web page LightFrame™ will find all the pictures and
enhance them simultaneously or in a photo viewing application you can enhance multiple photos at
once. Furthermore LightFrame™ 3 comes with an easy to activate full screen function. This is
especially handy for games and movies. Just one click on the full screen button and LightFrame™
enhances your total monitor.
Q:Can I upgrade my current Philips monitor to LightFrame™ 3?
A:No. For LightFrame™ 3 Philips developed special hardware which is build into the monitor.
Therefore upgrading from LightFrame™ 1 or 2 to 3 is not possible. It is however possible to upgrade
your LightFrame™ 1 monitor to LightFrame™ 2 by installing the LightFrame™ 2 software.
Q:Can I install LightFrame™ 3 over an older version?
A:When you install LightFrame™ 3 the setup wizard will scan your system to check if you have an
older version installed. If so, the setup wizard will remove that version before continuing with the
installation of the new version. Please be aware that for LightFrame™ 3 you also need a monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (4 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
which is capable of running the LightFrame™ 3 feature.
Q:How can I tell which version LightFrame™ my monitor can support?
A:To check which version of LightFrame™ is supported by your monitor check the LightFrame logo
which you will find on the top, right-hand corner of the monitor. If this logo has a small 3 in it, your
monitor is ready for LightFrame™ 3. Otherwise you should use the LightFrame™ 1 or 2 software.
Q: How many windows can I enhance at the same time?
A:In LightFrame™ 3 it is possible to enhance up to 8 windows at the same time. It is however
important to understand that when other windows, toolbars or menus overlap the enhanced
windows, the maximum number of enhanced windows can be less.
Q:How many pictures can LightFrame™ enhance in Internet Explorer?
A:In Internet Explorer LightFrame™ 3 can enhance up to 16 pictures at the same time.
LightFrame™ 3 filters the pictures it finds based on the minimum size of the picture therefore it may
happen that some pictures are not enhanced when you open a web page.
Q:Can I enhance two or more area’s at the same time?
A:Yes. With LightFrame™ 3 you have the possibility to select several windows with pictures and
videos and enhance them at the same time.
Q:Some times my mouse changes to a light bulb with a plus sign and sometimes with a
minus sign. What is the difference?
A:The mouse pointer in the shape of a light bulb indicates that LightFrame™ is ready to accept a
selection from you for which window should be enhanced.
If there is a minus sign it means that you are moving over a window where LightFrame™ is already
active and clicking this window will switch the enhancement off. A plus sign appears when moving
over a window which is not enhanced and clicking that one will enable LightFrame™ on that window.
Q:What is wrong when my mouse changes into a light bulb with a red cross?
A:Nothing. It just means that your mouse moves outside the application where you already have
one or more windows enhanced. You can only select windows with in the same application. The
cross indicates that you move into an area where you cannot make a selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (5 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
Q:Can I use LightFrame™ with Netscape?
A: You can use LightFrame™ with Netscape, but its functions are limited to manually highlighting
the entire Netscape client window. Since LightFrame™ is specifically designed for bright, high
contrast photo and video display, highlighting an entire Web page -- including text -- is not
recommended.
For best results, we recommend you use LightFrame™ with Microsoft Internet Explorer version 5.0
or higher. You can downloaded Internet Explorer free of charge from the Microsoft website (www.
microsoft.com). A copy of Internet Explorer 5.5 is also included on the CD-ROM shipped with your
monitor.
Q:Can I activate LightFrame™ on my entire screen?
A:Yes you can. And with LightFrame™ 3 this becomes even easier. There are three ways to do this:
1) click the full screen button in the LightFrame control bar with your mouse. 2) Press the "windows"
hotkey on your keyboard and press "L". 3) Via the OSD menu, scroll to Extra controls, press "OK",
then LightFrame On.
Q:When I apply LightFrame™ to a text document I get blurry characters, what is wrong?
A:Nothing is wrong. The effect which you see is due to the sharpness enhancement that
LightFrame™ is doing on your monitor. This sharpness improves a photo or video significantly
however on black text on a light background the effect is less favorable. Please keep in mind that
LightFrame™ is developed to enhance your photos and videos and not really for text or synthetic
pictures.
You can decrease this effect by lowering the sharpness setting in the LightFrame™ 3 control panel.
Q: How can I tell if my monitor comes with LightFrame™ 3?
A: All Philips LightFrame™ 3 monitors display this logo on their front bezel:
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (6 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
Lead-free product
Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your
health and promotes environmentally sound recovery and disposal of waste from electrical and
electronic equipment. Philips complies with the European Community stringent RoHS Directive
mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips,
you can be confident that your display device does not harm the environment.
Technical Specifications*
CRT
• Size and deflection
• Dot pitch
17 inch / 41 cm ; 90° deflection angle
0.25 mm
0.21 mm
• Horizontal pitch
Shadow mask, Real Flat, high contrast, anti-glare, anti-
static, anti reflection
• Tube type
• Phosphor
P22
• Recommended display area
• Maximum display area
12.0" x 9.0" / 306 x 230 mm
12.8" x 9.6" / 325 x 244 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (7 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
SCANNING
• Horizontal scanning
• Vertical scanning
30 - 71 KHz
50 - 160 Hz
VIDEO
• Video dot rate
• Input impedance
- Video
120 MHz
75 ohm
- Sync
4.7 kOhm
0.7 Vpp
• Input signal levels
• Sync input signal
• Sync polarities
Separate sync
Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 degrees K
• at 6500 degrees K
• at sRGB
x = 0.283 / y = 0.297
x = 0.313 / y = 0.329
x = 0.313 / y = 0.329
PRESET MODES
720 x 400 @ 70 Hz
640 x 480 @ 60 Hz
640 x 480 @ 85 Hz
800 x 600 @ 75 Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (8 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
800 x 600 @ 85 Hz
1024 x 768 @ 75 Hz
1024 x 768 @ 85 Hz
1280 x 1024 @ 60 Hz
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are
calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down
button to go to Color temperature and press OK again. Then move the down button to go to
sRGB and press OK again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change
either of these, the monitor will exit the sRGB mode and go to a color temperature setting of
6500K.
* These information are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (9 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard,
mouse or other input device is detected, the monitor will automatically "wake up". The following table
shows the power consumption and signaling of this automatic power saving features:
Power Management Definition
VESA's
Mode
Power Saving
(%)
Video
H-sync
V-sync
Power Used
LED color
Green
Active
Sleep
ON
OFF
OFF
Yes
No
--
Yes
No
--
Typical 68 W
< 1W
0 %
Flashing
Green
99%
Switch Off
Off
< 1W
99%
®
®
This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has
®
determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Physical Specifications
15.6" x 15.9" x 16.7" / 397 x 405 x 424 mm (including base)
15.6" x 13.1" x 16.7" / 397 x 333 x 424 mm (excluding base)
• Dimensions
• Weight
15.3 kg
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (10 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
100-240 VAC, 60-50Hz
(Please refer to rating label)
• Power supply
• Temperature (operating)
• Temperature (storage)
• Relative humidity(storage)
0° to 40°C / 32° to 104°F
-25° to +65°C / -13° to +149°F
5% to 95%
* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern.
* These information are subject to change without notice.
Pin Assignment
The 15-pin D-sub connector (male) of the signal cable (IBM systems):
Pin
No.
Pin
No.
Assignment
Assignment
1
2
Red video input
9
+5V DDC supply
Green video input
10 Logic ground
Identical output - connected
to pin 10
3
4
Blue video input
11
Identical output - connected
to pin 10
12 Serial data line (SDA)
5
6
Ground
13 H. Sync / H+V
Red video ground
14 V. Sync (VCLK for DDC)
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (11 of 12)2005-04-08 ¤W¤È 11:19:48
107C Product Information
7
8
Green video ground
Blue video ground
15 Data clock line (SCL)
Views
Follow the links to see various views of the monitor and its components.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/PRODUCT/PRODUCT.HTM (12 of 12)2005-04-08 ¤W¤È 11:19:48
Installing your Monitor
Installing your Monitor
Front View
Power button switches your monitor on.
OK button which when pressed will take you to the OSD controls
Contrast hotkey. When the "-" button is pressed, the adjustment
controls for the CONTRAST will show up.
Brightness hotkey. When the "+" button is pressed, the adjustment
controls for BRIGHTNESS will show up.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (1 of 3)2005-04-08 ¤W¤È 11:19:49
Installing your Monitor
"-" and "+" buttons, are used for adjusting the OSD of your monitor.
LightFrame™ hotkey. When the button is pressed, the high-
brightness function of LightFrame™ will show up.
High Bright hot key delivers 4 suitable brightness instantly for text,
internet, game and multimedia.
Rear View
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (2 of 3)2005-04-08 ¤W¤È 11:19:49
Installing your Monitor
1. Power in - attach power cable here.
2. Video In - this is a cable which is already attached to your monitor. Connect the other
end of the cable to your PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (3 of 3)2005-04-08 ¤W¤È 11:19:49
On-Screen Display
On-Screen Display
Description of the On Screen Display
What is the On-Screen Display?
This is a feature in all Philips monitors which allows an end-user to adjust screen performance of
monitors directly through an on-screen instruction window. The user interface provides user-
friendliness and ease-of-use when operating the monitor.
Basic and simple instruction on the control keys.
On the front controls of your monitor, once you press the
button, the On Screen Display (OSD)
Main Controls window will pop up and you can now start making adjustments to your monitor's
various features. Use the
to make your adjustments within.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (1 of 4)2005-04-08 ¤W¤È 11:19:49
On-Screen Display
The OSD Tree
Below is an overall view of the structure of the On-Screen Display. You can use this as reference
when you want to later on work your way around the different adjustments.
Your monitor may not include all the items in the OSD tree shown below.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (2 of 4)2005-04-08 ¤W¤È 11:19:49
On-Screen Display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (3 of 4)2005-04-08 ¤W¤È 11:19:49
On-Screen Display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (4 of 4)2005-04-08 ¤W¤È 11:19:49
Customer Care and Warranty
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED:
EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Turkey • Bulgaria •
NORTH AMERICA: USA & Canada
PACIFIC: Australia • New Zealand
AFRICA: Morocco • South Africa
MIDDLE EAST: Dubai • Egypt
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARRANTY.HTM2005-04-08 ¤W¤È 11:19:50
Frequently Asked Questions
Frequently Asked Questions
1.
What does the "Designed for Windows" logo signify?
The "Designed for Windows" logo means your Philips monitor fulfills the requirements and
recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WHQL tests.
2.
What models are Mac compatible?
All listed Philips monitors are Mac compatible. BUT, you may need an adapter to connect the monitor to
your Mac system. Please contact your dealer/reseller for details.
3.
What is TCO?
TCO is a Swedish abbreviation for the Swedish Confederation of Professional Employees.
4.
What is MPR?
MPR is a Swedish abbreviation for the Swedish National Board of Measurement and Testing.
5.
What are the differences between MPRII, TCO92, TCO95, TCO99 and TCO'03?
In the general hierarchy of standards, TCO'03/TCO99 is the highest level of certification. Next is TCO95,
which is "better" than TCO92, which, in turn, is better than MPRII. Below, we compare the standards in
each category.
-TCO 92 Phase out: June 30, 2000
-TCO 95 Will be end December 31, 2003
Emissions:
MPRII: Set low emission rules for visual displays.
TCO92: Imposed more stringent standards than MPRII.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (1 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
TCO95: Further toughened TCO92 rules.
TCO99: Delineated even more severe standards and test procedures than TCO95.
TCO'03: Same as TCO99 standard + Testing uncertainty.
Safety:
MPRII: No requirement.
TCO92/95/99/03: All set requirements.
Energy Saving:
MPRII: No requirement.
TCO92: Standby mode < 30W, Off mode < 8W
TCO95: Standby mode < 30W, Off mode < 8W
TCO99: Standby mode < 15W, Off mode < 5W
TCO'03:Standby mode < 15W, Off mode < 5W
Visual Ergonomics:
MPRII: No requirement.
TCO92: No requirement.
TCO95: Set ergonomic rules including minimum contrast level, flicker and jitter.
TCO99: Tightened TCO95 rules.
TCO'03: Tighten TCO99 rule for CRT and new requirement of screen color for TFT LCD Monitors.
Ecology:
MPRII: No requirement.
TCO92: No requirement.
TCO95: Set general ecological standards including recycling preparation, environmental policy and
environmental certification.
TCO99: Further tightened TCO95 norms.
TCO'03:Require the recycling information to users.
6. How do I enable the energy saving function?
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (2 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
Go to 'My Computer' and select 'Control Panel' followed by "Monitor Control". Select "All default
selection" and choose your Philips monitor model from the default driver list. Plug and Play will
automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your
PC supports power saving.
7. What is refresh rate?
"Refresh rate" describes the number of times an entire screen is vertically scanned each second. In
other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times
per second. A higher refresh rate means better image stability and less flicker. A high refresh rate helps
users who work long hours in front of a monitor avoid eye fatigue and stress. To change the refresh
rate, go into "Start/Settings / Control Pannel / Display / Properties / Setting/Advance/Adaptor" Windows
settings of the computer, the monitor will automatically adjust itself to the video card.
8. Why does the picture on the screen appear to flicker?
A low refresh rate or electrical interference typically causes flickering in the picture. Possible solutions
include the following:
●
●
●
●
Verify that the proper drivers are installed for your video card
Make sure that all electrical devices (such as mobile phones) are at least 1m from the monitor
Place the monitor in another physical location away from electrical interference
Adjust the refresh rate to 75hz or higher.
9. How do I adjust my monitor's resolution?
Available resolutions are determined by the capabilities of your video card and graphic driver. Under
Windows '95, you may select the desired available resolution through the 'Display properties/Settings'
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (3 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
10. How can I adjust the size, position and rotation of my screen?
Depending on the model you own, you can use your CustoMax Software, On Screen Display (OSD) or
control knobs located on the monitor.
11. What if I get lost when making monitor adjustments?
Simply press OK button then select "Reset to factory settings" to restore all settings.
12. What is LightFrame ?
LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for
TM
boosting a monitor 's brightness and sharpness. With LightFrame , the user experiences TV quality
performance for video or photos without deterioration to the monitor 's performance in windows used for
other applications.
13. How does LightFrame work?
LightFrame consists of a software application and an Integrated Circuit (IC) embedded in the monitor.
Together, they boost brightness and sharpness in a user defined window or screen area. Unique
TM
LightFrame technology dramatically improves photo and video display quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (4 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
14. Why is LightFrame important to me?
With LightFrame , selected Philips monitors deliver TV quality video and photo display while
maintaining monitor performance for text-based applications. The result is that movies and other video
are brighter and livelier; photos are more vibrant and lifelike.
15. Will anyone else have this?
LightFrame was invented, developed and patented by Philips. It is a unique feature that you will find
exclusively in Philips monitors.
16. Will LightFrame shorten the life of a monitor?
No. Extensive testing has confirmed LightFrame does not adversely affect monitor life. Today's state-
of-the-art Philips monitors employ improved phosphors and are designed for high light output.
LightFrame normally highlights photos and videos. Though the peak brightness of the highlighted area
is strongly increased, the average brightness - a determining factor for cathode deterioration - is not
normally increased. In any case, a special Automatic Beam Limiter (ABL) circuit keeps a monitor 's
maximum average brightness within acceptable levels.
17. I get a message warning that my monitor 'may not support LightFrame '. I am certain my
monitor does. What is wrong?
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (5 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
Only a Philips driver can determine if your monitor is equipped with LightFrame ; a generic Windows
driver cannot. Install the special Philips driver that came with your monitor. If the warning continues to
TM
flash after your Philips driver is installed, ignore the message. LightFrame will function properly.
18. What will happen when my system is no longer connected to a LightFrame™ enabled
monitor - for example, when I take my notebook on the road?
Philips exclusive LightFrame feature requires the combined operation of hardware that resides in your
monitor and software installed on your system. It only works when a monitor with built-in hardware
TM
receives commands from system software. Without both the LightFrame hardware equipped monitor
and system software, the LightFrame does not function.
19. What is "XtraSpace Design" (XSD)?
XSD stands for XtraSpace Design, a Philips breakthrough that reduces a CRT display device's footprint.
Philips XSD monitors combine the world's smallest front-to-back footprint with excellent front of screen
performance.
20. How did Philips achieve XtraSpace Design?
Philips achieved this breakthrough in reduced footprint CRT display devices through short depth tubes
and a focused design process that squeezed every excess millimeter out of XSD monitor desk space
requirements.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (6 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
21. What is Philips monitors' solution for audio?
Not all users need multimedia capabilities. To give users freedom of choice, Philips provides an optional
Multimedia Base (type number: 6G3B10). The Multimedia Base replaces the easily removable standard
pedestal of the monitor.
22. Which models can be incorporated with the Multimedia Base?
The following models can be incorporated with the Multimedia Base: 107B5, 107E6,107F6, 107S6,
107T6.
23. What are Philips Multimedia Base's specifications?
See detailed Multimedia Base specifications on the product information page.
24. Why is a Multimedia Base better than separate speakers?
The major advantage of the Multimedia Base is its minimal space requirements. In fact, it hardly uses
any extra space at all: monitor depth and width are unchanged. Only the monitor's height is increased
by only 3 centimeters.
25. Where can I buy a multimedia base to incorporate with my Philips monitor?
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (7 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
Please contact your dealer/reseller for details.
26. What does Auto Calibrate do?
It makes your monitor perform better and last longer. As a monitor becomes older, brightness gradually
deteriorates and its colors change. This well-known process effects all monitors. Eventually after a
number of years, the monitor's brightness deteriorates to below 50% of its original value. At this stage,
the usable life of a monitor is considered ended. Auto Calibrate regularly readjusts color temperature
and luminance to their original values.
27. How does Philips Auto Calibrate feature benefit me?
With Auto Calibrate, it takes a monitor's luminance 33 percent longer to deteriorate to the 50 percent
level that marks the end of a display device's useful life. Thanks to Auto Calibrate, a monitor with a
normal life of 10,000 hours, for example, would last for 13,300 hours, a full one third longer.
28. How does Auto Calibrate work?
During the calibration process, different predefined black and white images are displayed on the screen.
The beam currents of the red, green and blue cannon are accurately measured and compared to the
original values stored in the monitor. By readjusting gain values of the individual cannons, deviation is
reduced to zero. Default values are stored during production. If the user sets a new color temperature,
this new value is saved as the new default value.
29. When should calibration be performed?
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (8 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
The calibration process takes less than six seconds. During this period, different specific images are
displayed. After the process is finalized, the original image is redisplayed. Constant re-calibration is not
required. Calibration should be performed after the monitor is warmed up. Auto Calibration takes place
when a monitor receives a signal indicating an imminent switch to its sleep mode/stand-by mode.
30. Which models of Philips monitors are equipped with Auto Calibrate feature?
Auto Calibrate is currently available in the new 202P, 201B and 109P.
31. The Main Menu displays OSD MAIN MENU LOCKED . Pressing the front control panels
hasno effect. How can I unlock this function?
Press and hold the OSD menu key for about 15 seconds until picture displays "OSD MAIN MENU
UNLOCKED"
32. My screen shows NO SYNC INPUT , how can I get rid of this?
Check the following for possible solutions:
●
●
●
●
Bent pins on the video cable
Make sure the computer is turned on
Ensure the VGA Cable is properly connected
Ensure the BNC/D-Sub connector on the rear of the monitor is in the correct position, newer
models have this option in the On Screen Display under Input Signal Selection.
Video card may be not a VESA standard (try the monitor with another computer)
●
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (9 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
33. Why does my monitor display "Out of Range"?
The video card installed in your computer may be too high for the monitor 's specifications. Please
contact your computer manufacturer for details on how to lower resolution for your operating system.
34. What is Moire? Why does my monitor have this wavy phenomenon?
Moire is a natural effect or phenomenon of CRT that has the appearance of a wavy pattern, which is
repetitive and superimposed on the screen as ripple images. These are a few suggestions to help
reduce or minimize the effects:
●
Some monitors have a Moire cancellation feature, activate it to the on position or adjust the
Moire cancellation function via the OSD on the monitor.
●
●
●
Change resolution to the recommended standard for the specific monitor size.
Change Window viewing pattern/scheme to a pattern where the Moire is less visible.
Change horizontal and vertical size to optimize the reduction of the Moire effect.
35. My monitor appears to be missing one or more colors. How do I correct this?
●
●
If the OSD menu is also missing a color, please contact service for details
Set color temperature to 9300 color coordination
●
●
Check the video cable for any bent pins
Video card could be defective (try the monitor with another computer).
36. When I degauss my monitor, it makes a loud noise. Is this normal?
Yes, when degaussing your monitor via the OSD, it is normal for the monitor to make a relatively loud
noise. Please be aware that many models will not degauss more than once within any given time period
(up to 10 minutes). This is due to the unit having a temperature sensitive resistor. While the unit is
degaussing, the resistor increases in value with heat and once it reaches a certain temperature, the
resistance will rise and prevent voltage from reaching the degaussing coil. This is what stops the
degausser, and this device's resistance will decrease as it cools back off, enabling the degauss function
to operate again. This is an intentional design and is an industry standard, not just for Philips monitors.
Please be aware that not all models in the Philips range has this manual degauss function. Some
models are built with an auto degauss feature which automatically degausses the monitor when it is
switched on.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (10 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
37. How do I adjust the picture on the screen?
Please perform the following to correct the picture image:
●
Reset your monitor via the OSD menu
●
●
Adjust the Horz (width) and/or Vert size (height) in the OSD
Change monitor timing to work at the recommended resolution
38. The edge of the picture on the screen appears to be distorted. How can I correct this?
Please perform the following to correct the picture image:
●
A magnetic or electrical interference typically causes poor geometry in the picture. Place the
monitor in a different physical location
●
●
Reset the monitor to the factory preset via the OSD menu
Access the Geometry Menu in the OSD of the Monitor and perform the necessary adjustments
●
Change the monitor timing to the recommended resolution
39. The picture appears too dim. How can I correct this?
Adjust Brightness and/or Contrast via the monitor 's OSD. Some models have a Video Input Select
under Advanced Controls in the monitor 's OSD. Most computers require it to be set at 0.7V.
Please review the following for possible solutions:
●
●
●
If the OSD menu is also dim, please contact service for repair
Reset the monitor via the OSD menu
Change the color temperature settings to 9300 color coordination via the OSD menu
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (11 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
●
Set the Contrast to maximum level (100) and Brightness to middle level (50)
Video card could be defective (try the monitor with another computer)
40. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal?
This phenomenon can occur with Philips 107P, 109P and 202P monitors and is normal. Your monitor is
using an Aperture Grille, which consists of fine vertical wires to align the electron beams with the
phosphors on the screen. To prevent these vertical wires from vibrating and to keep them properly
aligned with the picture tube, two horizontal damper wires are required. These are located on one-third
and on two-third from the top of the screen. The result is that you will see two very thin horizontal lines
over your screen since the two wires are casting a slight shadow on the screen surface. You will find
these wires (line) in any monitor from Philips and other brands using the Aperture Grille technology.
41. How can I increase the color display of my monitor?
The amount of video memory your video card holds determines the amount of colors that can be
displayed on your computer screen. To get the most out of your video card, you will need to either install
the latest drivers onto your computer or upgrade the video cards memory. Please check with your
computer or video card manufacturer for further details.
42. Why is there no picture on my monitor?
●
●
●
Check the wall socket for power. Verify that there is power by connecting another product.
Ensure the power cable is correctly attached to both the wall socket and the monitor.
Check that the power button is switched on.
●
Unplug the monitor for approx. 1 minute and plug it in again. Switch the monitor back on.
43. Why is there no picture on my monitor even though the power LED is yellow/amber or
flashing green?
●
Reboot your computer while holding the Ctrl key on your computer. If you see any picture during
the boot procedure, please verify the settings of your video card (for Windows go to Control
Panel and select Display).
●
Check that the video cable is not damaged, bent or that any of the pins in the connector are
damaged (please be aware that some VGA connectors have one missing pin). If damaged,
replace with a new cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (12 of 13)2005-04-08 ¤W¤È 11:19:52
Frequently Asked Questions
●
●
Check that the cable is attached correctly to the computer.
Press any key on the keyboard to wake-up the computer from power saving mode.
44. Why is there no picture on my monitor even though the power LED is green?
●
Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to
increase Contrast and then press and hold the 4 (+) button to increase Brightness. These
buttons are located on the front of your monitor.
●
●
Press both the 5(-) button and the OK button at the same time to switch input A|B.
Try and repeat step 48 above.
45. Why does the picture disappear after I press the on/off button quickly?
This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds
between powering off and on your monitor, your picture will then be restored.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (13 of 13)2005-04-08 ¤W¤È 11:19:52
Glossary
Glossary
A
Autoscan
A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically
horizontal and vertical frequencies of input signals with those of the installed video card. An
autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered
trademark of NEC, provides a similar function.
B
Balanced pincushion
See Geometric distortion
BNC connection
A special construction of connector used in some monitors with higher horizontal scanning
frequency. The BNC connection can provide the optimum shielding and matching characteristic
impedance of video signal path to ensure the best video performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (1 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
C
CE Mark
CE mark is displayed on products per EMC and LV ( low Voltage Device ) directives in compliance
with European Community safety, EMI and EMS requirements and is compulsory on products for
sale in the European Community.
Color temperature
A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of
a black body radiating with the same dominant frequency as the source.
Most Philips monitors offer the possibility of setting the color temperature to any desired value.
Contrast
The ratio between the brightness of the brightest and darkest parts of a picture. The darkest part of
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (2 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
a picture is set by the brightness of the unexcited phosphor, which is governed by the degree with
which ambient light is reflected. Contrast is therefore reduced in conditions of high ambient light
levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other tubes.
Convergence error
Bean misalignment causing one or more of the three beams passing through the wrong aperture in
the shadow mask and striking a phosphor dot in the wrong triad.
Convergence error is expressed in mm often at three well-defined points on the screen, designated
A, B and C (see figure ). Also known as misconvergence.
Points where convergence error is specified.
Convergence-error correction
A method of correcting for convergence error to insure that all three beams land simultaneously in
the same triad. This is usually accomplished by means of special convergence-error correction coils
in the deflection yoke.
CRT
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (3 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
Cathode-ray tube - the general term for all tubes in which one or more electron beams emitted by a
cathode are periodically scanned across a phosphor screen by means of deflection circuitry. A
special form of the cathode-ray tube is the TV and monitor picture tube.
D
DDC (Display Data Channel)
DDC is a communication channel for displays and computers. The DDC feature allows the monitor
controller to be automatically configured to make optimal use of the display without manual user
interaction. DDC is implemented as part of the new Plug & Play approach introduced into the PC
market to increase user friendliness.
The three levels developed for Plug & play are: (1) DDC1, monitor send data to the PC; (2) DDC2B,
PC can request information from monitor; and (3) DDC2Bi which is a two-way communication -
monitor can be addressed and PC or graphics board can give commands to monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (4 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
DDC 1/2B
See DDC.
DDC 2Bi
See DDC.
Degaussing
The procedure of demagnetizing the shadow mask and associated metal parts of a picture tube at
switch-on to minimize picture distortion. This is usually accomplished by means of a special
degaussing coil through which a decaying alternating current is passed to generate an alternating
magnetic field that gradually decays to demagnetize the tube. Some monitors offer a manual
degaussing facility that can be activated at any time.
Digital control
Microprocessor-based digital control of picture parameters and video modes for complete control of
picture settings and modes and instant recall of all settings at the push of a button. This is a very
advanced feature that allows the user to switch to any required mode at any instant without having
to spend time readjusting the picture. It is currently available in most Philips monitors.
Dot pitch
The shortest distance between two phosphor dots of the same color on the screen. The smaller the
dot pitch, the better the resolution of the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (5 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
Dot rate
Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred
between the video card and subsequent processing circuitry.
Also known as video dot rate.
E
Electromagnetic radiation standards
International standards set to limit electromagnetic emissions from monitors. There are currently
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (6 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
two important standards both derived from regulations originally laid down by Swedish authorities.
MPR-II
The standard originally proposed by the Swedish National Board of Measurement and Testing. It
set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopted
as a world standard. MPR-II defines maximum permitted electrostatic, magnetic and electric field
levels measured at a distance of 50 cm from the center of the monitor (see table).
TCO
In 1991, the Swedish Tjänstemannens Central Organization (TCO, Swedish confederation of
Professional Employees ) set a standard even more severe than MPR-II, especially for alternating
electric fields (AEF). The TCO standard is more severe since not only are the permitted field levels
reduced compared with MPR-II, but the measuring distance is also reduced (see table).
Electromagnetic radiation standards
EMI (Electrical Magnetic Interference)
The electrical and/or magnetic radiation coming from the working electrical or electronic equipment.
EMS (Electrical Magnetic Sustainment)
The ability of electrical or electronic equipment to function properly in the environment with electrical
and/or magnetic interference.
F
Flicker
Very rapid variations in picture intensity caused by the finite time required for the electron beam to
scan a picture onto the screen. Two kinds of flicker occur: line flicker caused by the electron beam
scanning-in each line of the picture; and frame flicker (or field flicker if the picture is interlaced)
caused by the frame repetition rate of 50 frames/second. Frame flicker is noticeable with GUI and
DTP software (which have a light background), and can be very disturbing, especially for those who
work regularly with displays - contributing to eye strain, headaches, visual blurring, stress, etc. The
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (7 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of
the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing
age.
H
Hertz
The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to
1 cycle/second.
Horizontal dot pitch
See Dot pitch.
Horizontal scanning frequency
Also called line frequency and expressed in kHz, it is the number of video lines written on the
screen every second (from left to right). The higher the horizontal scanning frequency, the better the
resolution (i.e., the higher the resolution and/or the higher the refresh rate).
I
INF File
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (8 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
INF file (Information File)
Information (INF) files store information in a specific format. The set-up functions retrieve
information from the INF file to use when performing installation operations. Examples of the type of
information stored in an INF file include INI and registry changes, file names, and locations of the
source files on source media.
Interlaced/non-interlaced
Interlaced.
The method of writing a picture on the screen by initially writing all even lines and subsequently
writing all odd lines of the picture. Result: The complete picture is composed of two interlaced half
pictures (or fields). With interlacing, a vertical (or field) frequency of 50 Hz means a picture (or
frame) frequency of 25 Hz.
Non-interlaced.
The method of writing a picture on the screen by successive video lines of the picture so that a full
frame is written onto the screen in one vertical sweep of the beams. With a non-interlaced display, a
vertical frequency of 50 Hz means a picture (or frame) frequency of 50 Hz. At any given resolution,
non-interlaced modes are preferable to interlaced modes; however, generation of non-interlaced
modes is more expensive.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (9 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
L
Linearity
The degree to measure the actual location of a pixel on the screen corresponds with its intended
location. ( see figure )
Line frequency
See Horizontal scanning frequency.
Low-emission monitor
A monitor that complies with international standards on radiation.
See Electromagnetic radiation standards.
Low-frequency electric and magnetic fields
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (10 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
Alternating fields generated by the deflection yoke. These are subject to increasing attention,
notably by governing authorities, the trade and the press. Although there is no scientific evidence
that monitor emissions are harmful, much effort has gone into reducing emissions on the principle
of better safe than sorry. Currently, there are two areas of interest: very-low frequency (VLF)
electric and magnetic fields extending from 2 kHz to 400 kHz, and extreme low frequency (ELF)
fields extending from 5 Hz to 2 kHz.
See also Electromagnetic radiation standards.
M
Moiré effect
A fringe pattern arising from the interference between two superimposed line patterns.
In a monitor it comes from the interference between the shadow mask pattern and the video
information (video moiré), and between the shadow mask pattern and the horizontal line pattern
(scan moiré). It shows itself as wavy patterns on the screen and becomes more noticeable as
monitor resolution increases. Since the video signal varies continuously, little can be done about
video moiré. Scan moiré depends on the horizontal scanning frequency and can be alleviated by
appropriate choice of frequency. Autoscan (MultiSync) monitors, which operate over a range of
scanning frequencies, may sometimes exhibit moiré in certain video modes.
MPR
See Electromagnetic radiation standards.
MultiSync monitor
See Autoscan monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (11 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
N
Non-interlaced
See Interlaced/non-interlaced.
O
OSD (On Screen Display)
The feature that allows an end user to adjust screen performance and parameters of monitors
directly through an on-screen instruction window. See CustoMax in CrystalClear section.
Overscan
The practice in which areas without useful video information are scanned outside the visible screen
area in order to make maximum use of the screen for display of active video information. This
practice is occasionally necessary because some video cards generate a video pattern that is
smaller than the visible screen area, resulting in an image that is smaller (and less legible) than it
needs to be.
P
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (12 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
Parallelogram Distortion
See Geometric distortion.
Phosphor
Generic name for the class of substances that exhibit luminescence. To produce a picture on
screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into
luminescence by the electron beam. Typical examples of phosphors are P22 medium short-
persistence phosphor and EBU high-color-saturation phosphor.
Pin-cushion Distortion
See Geometric distortion.
Pixel
Abbreviation for picture element, the smallest element of the picture that can be displayed on the
screen. The smaller the pixel size, the better the resolution of the monitor. Pixel size is determined
by the size of the electron spot on the screen and not necessarily by the phosphor dot pitch (the
size of the triad). Thus, a monitor with a large electron spot covering several triads can exhibit poor
resolution even though its dot pitch is small.
Pixel frequency
The number of pixels that can be written in a video line per second.
Pixel rate
See pixel frequency
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (13 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
Plug-and-Play
See DDC. See USB section.
R
Raster
The area on screen that electron beam can reach.
Refresh rate
See Vertical scanning frequency.
Resolution
The number of pixels that can be displayed on the screen. The resolution is specified as the
number of pixels in a line multiplied by the number of horizontal lines.
See also video graphic adapter.
Rotation function
The feature that allows users to adjust the whole screen rotating to be horizontal.
Because of the magnetic field of earth, the screen of monitor will be tilt when the screen faces
toward the different direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (14 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
S
Screen coatings
Anti-Static coatings
Due to bombardment by beam electrons, monitor screens become electrically charged when in use.
Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a
conductive coating deposited on the screen (or on a glass panel immediately in front of the screen)
that conducts away the charge and prevents screen dust build-up.
AGAS (Anti-Glare, Anti-Static) coating
AGAS is a silica coating applied to the surface of the screen by a spinning and spraying process. It
operates by diffusing reflected light to blur images of light sources on the screen. To provide anti-
static properties, the coating is impregnated with small conductive particles.
ARAS (Anti-Reflection, Anti-Static) coating
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (15 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
ARAS is one of the most effective anti-reflection/anti-static screen treatments currently available. It
is composed of a multi-layer structure of transparent dielectric material that suppresses specular
reflections by broadband interference effects at the screen surface. Anti-static properties are
provided by a single conductive layer within the multi-layer structure.
With ARAS, the intensity of reflected light is reduced from around 4.5% of the incident light (the
reflectivity of uncoated screens) to less than 0.5%. ARAS also has a major advantage over other
screen treatments: It doesn't diffuse or scatter reflected light, so picture contrast and sharpness
remain completely unimpaired. It's also easy to clean and tough enough to withstand commercially
available cleaning agents.
The ARAS coating reflects only about 0.5% of the incident light.
AGARAS (Anti-Glare Anti-Reflection Anti-Static) coating.
A combined anti-reflection, anti-glare, anti-static coating.
Self-test function
A monitor equipped with hardware or software to automatically detect cable connection status.
Shape
Deviation of a reproduced picture from its intended shape. The following types of distortion are most
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (16 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
common:
SOG (Synchronization On Green)
A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical
sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are
transmitted to a monitor using one of three methods:
1. Separate sync: Horizontal and Vertical sync signals transmitted separately
2. Composite sync: Horizontal and vertical sync pulses mixed into a single signal train.
3. SOG: Horizontal and vertical sync pulses mixed, then combined with the green color signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (17 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
T
TCO
See Electromagnetic radiation standards.
Tilt function
See rotation function.
Trapezoid distortion
See Geometrical distortion.
TTL signal
A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors.
With TTL driving, the red, green and blue signals can only be switched on or off or provided with an
intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors. Video standards
such as MDA, CGA and EGA are based on TTL level.
U
USB or Universal Serial Bus
A smart plug for PC peripherals. USB automatically determines resources (like driver software and
bus bandwidth) required by peripherals. USB makes necessary resources available without user
intervention.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (18 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
●
USB eliminates "case angst" -- the fear of removing the computer case to install add-on
peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing
new peripherals.
●
USB does away with "port gridlock." Without USB, PCs are normally limited to one printer,
two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on
(scanner or video camera, for example) and a joystick. More and more peripherals for
multimedia computers arrive on the market every day. With USB, up to 127 devices can run
simultaneously on a computer.
●
USB permits "hot plug-in." There's no need to shut down, plug in, reboot and run set-up to
install peripherals. And no need to go through the reverse process to unplug a device.
In short, USB transforms today's "Plug-and-Pray" into true Plug-and-Play!
Hub
A Universal Serial Bus device that provides additional connections to the Universal Serial Bus.
Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub.
Hubs serve to simplify USB connectivity from the user's perspective and provide robustness at low
cost and complexity.
Hubs are wiring concentrators and enable the multiple attachment characteristics of USB.
Attachment points are referred to as ports. Each hub converts a single attachment point into
multiple attachment points. The architecture supports concatenation of multiple hubs.
The upstream port of a hub connects the hub towards the host. Each of the other downstream ports
of a hub allows connection to another hub or function. Hubs can detect, attach and detach at each
downstream port and enable the distribution of power to downstream devices. Each downstream
port can be individually enabled and configured at either full or low speed. The hub isolates low
speed ports from full speed signaling.
A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-
controlled switch between the upstream port and downstream ports. It also has hardware support
for reset and suspend/resume signaling. The controller provides the interface registers to allow
communication to/from the host. Hub specific status and control commands permit the host to
configure a hub and to monitor and control its ports.
Device
A logical or physical entity that performs a function. The actual entity described depends on the
context of the reference. At the lowest level, device may refer to a single hardware component, as
in a memory device. At a higher level, it may refer to a collection of hardware components that
perform a particular function, such as a Universal Serial Bus interface device. At an even higher
level, device may refer to the function performed by an entity attached to the Universal Serial Bus;
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (19 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and
logical.
Downstream
The direction of data flow from the host or away from the host. A downstream port is the port on a
hub electrically farthest from the host that generates downstream data traffic from the hub.
Downstream ports receive upstream data traffic.
Upstream
The direction of data flow towards the host. An upstream port is the port on a device electrically
closest to the host that generates upstream data traffic from the hub. Upstream ports receive
downstream data traffic.
UPS (Universal Power Supply)
The monitor with UPS feature can work in different countries with various mains voltage.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (20 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
V
Vertical dot pitch
See Dot pitch.
Vertical scanning frequency
Expressed in Hz, this is the number of fields written to the screen every second in interlaced mode.
In non-interlaced mode vertical scanning frequency is the number of frames (complete pictures)
written to the screen every second (also known as refresh rate).
Vertical sync pulses
A train of square shaped waveforms that define the start of a new frame.
VESA
Video Electronic Standards Association, a consortium of manufacturers formed to establish and
maintain industry-wide standards for video cards and monitors. VESA was instrumental in the
introduction of the Super VGA and Extended VGA video graphics standards (see Video graphics
adapters) with a refresh rate of 70 Hz, minimizing flicker and helping to reduce operator eyes
fatigue and stress.
Video dot rate
See Dot rate.
Video graphics adapters
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (21 of 22)2005-04-08 ¤W¤È 11:19:53
Glossary
A card equipped with a character or graphic generator and video memory, which maps to the
screen. A microprocessor scans video memory and translates bit information from the computer
into displayable video signals for the monitor. These cards comply with various standards that
determine the nature and quality of the display.
VGA (Video Graphics Array), introduced in 1987, was the first analog card. It offered still higher
resolution than EGA: 640 X 480 pixels for graphics and 720 x 400 pixels for text, and a color palette
of 256 colors. VGA could also emulate EGA and CGA.
Super VGA, devised by VESA in 1989, offers a resolution of 800 x 600 pixels.
Extended VGA, introduced by VESA in 1991, offers a top resolution of 1024 x 768 pixels (non-
interlaced) and a refresh rate slightly higher than IBM's XGA 8514A.
High-end, graphics adapters, introduced over the last three years for professional workstations,
offer top resolutions from 1280 x 1024 to 1600 x 1280, horizontal line frequencies up to 90 kHz and
bandwidths up to 200 MHz.
VIS (Viewable Image Size)
The real screen dimensions that users can see measured diagonally. The VIS of a monitor is
always less than the so called screen size of a monitor. For example, the VIS of a 17-inch monitor
is only about 16 inches. It depends on the useful screen size of CRT and the opening of a monitor's
front cabinet.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (22 of 22)2005-04-08 ¤W¤È 11:19:53
Download and Print
Download and Print
This page provides an option to read the manual in .pdf format. PDF files can be downloaded into
your hard disk, then viewed and printed with Acrobat Reader or through your browser.
If you do not have Adobe® Acrobat Reader installed, click on the link to install the application.
Download instructions:
To download the file:
1. Click-and-hold your mouse over the icon below. (Win95/98/2000/Me/XP users right-click)
2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to
Disk'.
3. Choose where you would like to save the image; click 'Save' (if prompted to save as either 'text'
or 'source', choose 'source').
Printing instructions:
To print the manual:
1. With the manual file open, follow your printer's instructions and print the pages you need.
English language manual
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/DOWNLOAD/DOWNLOAD.HTM (1 of 2)2005-04-08 ¤W¤È 11:19:54
Troubleshooting
Troubleshooting
Common Problems
Having trouble? Something not working? Before calling for help, try these suggestions.
Having this
Check these items
problem?
●
●
●
Make sure the Power cable is plugged into the power outlet
and back of the monitor.
Power button on the front of your monitor should be in the
ON position.
Disconnect the monitor from the power outlet for about one
minute.
No Picture
(Power LED not lit)
●
●
Make sure the computer is turned on.
Make sure the monitor cable is properly connected to your
computer.
Check to see if the monitor cable has bent pins.
The Energy Saving feature may be activated
No Picture
(Power LED is flahsing
green)
●
●
●
●
Make sure the Brightness and Contrast controls are set
correctly.
Make sure the monitor cable is properly connected to your
computer.
Check to see if the monitor cable has bent pins.
Make sure the computer Power button is on.
No Picture
(Power LED is green)
●
●
Screen doesn't show
●
Make sure the monitor cable is properly connected to your
computer. (Also refer to the Quick Start Guide).
Check to see if the monitor cable has bent pins.
Make sure the computer is turned on.
●
●
when you turn on the
monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/saf_troub.htm (1 of 3)2005-04-08 ¤W¤È 11:20:04
Troubleshooting
●
If you are using a non-VESA-DDC standard video card,
turn the DDC1 / 2B feature Off.
No color or intermittent
color
●
●
●
The picture may need degaussing.
Remove any nearby magnetic objects.
Face the monitor toward the East for the best picture
quality.
Color appears blotchy
●
●
Check the Color Temperature.
Make sure the monitor cable is properly connected to your
computer.
Missing one or more
colors
●
Check to see if the monitor cable has bent pins.
●
●
Adjust the Brightness and Contrast controls.
Check your video card and it's owner's manual instructions
for it may be a non-VESA-DDC Standard card.
Dim Picture
●
●
Adjust the Horizontal and/or Vertical Size.
Adjust the Zoom.
Picture is too large or
too small.
●
Adjust the geometry.
Edges of the picture
are not square.
●
●
Eliminate the use of a video extension cable and/or video
switch box.
Face the monitor toward the East for the best picture
quality.
Picture has a double
image.
●
●
Check to make sure Moiré is switched off.
Adjust Sync Input.
Picture is not sharp.
Unstable Picture
●
Increase your refresh rate.
Problem with On
Screen Display
●
Refer to the instructions and troubleshooting information in
that chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/saf_troub.htm (2 of 3)2005-04-08 ¤W¤È 11:20:04
Troubleshooting
For further assistance, refer to the Consumer Information Centers list to contact your local Philips
distributor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/saf_troub.htm (3 of 3)2005-04-08 ¤W¤È 11:20:04
Regulatory Information
Regulatory Information
TCO '99 Information (For TCO Model Only)
Congratulations!
You have just purchased a TCO' 99 approved and labeled product! Your choice has provided you with a product
developed for professional use. Your purchase has also contributed to reducing the burden on the environment
and also to the further development of environmentally adapted electronics products.
Why do we have environmentally labeled computers?
In many countries, environmental labeling has become an established method for encouraging the adaptation of
goods and services to the environment. The main problem, as far as computers and other electronics equipment
are concerned, is that environmentally harmful substances are used both in the products and during their
manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of
these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important from
the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity
generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive
waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby
consumes a lot of energy.
What does labeling involve?
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (1 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
This product meets the requirements for the TCO' 99 scheme which provides for international and environmental
labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric
and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be
prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered
to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the
computer shall be reasonable for the user.
Labeled products must meet strict environmental demands, for example, in respect of the reduction of electric
and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO' 99 approved and labeled products may also be obtained
via the Internet, using the address: http://www.tco-info.com/
Environmental Requirements
Flame retardants
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (2 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame
retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine
or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in
fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in
human blood and researchers fear that disturbances in fetus development may occur.
The relevant TCO' 99 demand requires that plastic components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit
boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays.
Cadmium damages the nervous system and is toxic in high doses. The relevant TCO' 99 requirement states that
batteries, the color-generating layers of display screens and the electrical or electronics components must not
contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high
doses. The relevant TCO' 99 requirement states that batteries may not contain any mercury. It also demands
that mercury is not present in any of the electrical or electronics components associated with the labeled unit.
CFCs (freons)
The relevant TCO' 99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of
ultraviolet light with increased risks e.g. skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system
and in higher doses, causes lead poisoning. The relevant TCO' 99 requirement permits the inclusion of lead
since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.
TCO' 03 Information (For TCO Model Only)
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (3 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
Congratulations!
The display you have just purchased carries the TCO'03
Displays label. This means that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This
makes for a high performance product, designed with the
user in focus that also minimizes the impact on our natural
environment.
Some of the features of the TCO'03 Display requirements.
Ergonomics
●
Good visual ergonomics and image quality in order to improve the working environment
for the user and to reduce sight and strain problems. Important parameters are luminance,
contrast, resolution, reflectance, colour rendition and image stability.
Energy
●
Energy-saving mode after a certain time-beneficial both for the user and the environment
●
Electrical safety
Emissions
●
●
Electromagnetic fields
Noise emissions
Ecology
●
●
The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 000
Restrictions on
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (4 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in co-
operation with scientists, experts, users as well as manufacturers all over the world. Since the
end of the 1980s TCO has been involved in influencing the development of IT equipment in a
more user-friendly direction. Our labelling system started with displays in 1992 and is now
requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
Recycling Information for Customers
Philips establishes technically and economically viable objectives to optimize the environmental performance of
the organization's product, service and activities.
From the planning, design and production stages, Philips emphasizes the important of making products that can
easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back
initiatives and recycling programs whenever possible, preferably in cooperation with competitors.
There is currently a system of recycling up and running in the European countries, such as The Netherlands,
Belgium, Norway, Sweden and Denmark.
In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic Industries
Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products from
household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profit organization
focused on promoting recycling market development - plans to implement a recycling program.
In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to
follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw
For help and service, please contact Consumers Information Center or F1rst Choice Contact Information Center
in each country or the following team of Environmental specialist can help.
Mr. Job Chiu - Environment manager
Philips Electronics Industries (Taiwan) Ltd, Monitor Business Unit
E-mail: [email protected]
Tel: +886 (0) 3 454 9839
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (5 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
Mr. Maarten ten Houten - Senior Environmental Consultant
Philips Consumer Electronics
E-mail: [email protected]
Tel: +31 (0) 40 27 33402
Ms. Delmer F. Teglas
Philips Electronics North America
E-mail: [email protected]
Tel: +1 865 521 4322
CE Declaration of Conformity
●
Philips Consumer Electronics declare under our responsibility that the product is in conformity with the
following standards
- EN60950:2000 (Safety requirement of Information Technology Equipment)
- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)
- EN55024:1998 (Immunity requirement of Information Technology Equipment)
- EN61000-3-2:2000 (Limits for Harmonic Current Emission)
- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)
following provisions of directives applicable
- 73/23/EEC (Low Voltage Directive)
- 89/336/EEC (EMC Directive)
- 93/68/EEC (Amendment of EMC and Low Voltage Directive)
and is produced by a manufacturing organization on ISO9000 level.
●
The product also comply with the following standards
- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for Visual Display)
- ISO13406-2 (Ergonomic requirement for Flat panels)
- GS EK1-2000 (GS specification)
- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)
- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)
- TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission,
TCO: Swedish Confederation of Professional Employees) for TCO versions
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (6 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
Energy Star Declaration
PHILIPS
107C6*
This monitor is equipped with a function for saving energy which supports the VESA Display Power
Management Signaling (DPMS) standard. This means that the monitor must be connected to a
computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification
803299/94. Time settings are adjusted from the system unit by software.
NUTEK
VESA State
ON (Active)
LED Indicator
Green
Power Consumption
Typical 68W
Normal operation
Power Saving
Alternative2
One Step
OFF (Sleep)
Switch Off
Flashing Green
Off
< 1W
< 1W
®
As an ENERGY STAR Partner, PHILIPS has determined that this product meets
®
the ENERGY STAR guidelines for energy efficiency.
We recommend you switch off the monitor when it is not in use for quite a long time.
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (7 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
●
●
●
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer
device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive
moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de
class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon
à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une
installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences
qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer
des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir
l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la
cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce
qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur
pourrait essayer de corriger la situation en prenant les mesures suivantes:
●
●
●
●
Réorienter ou déplacer l'antenne de réception.
Augmenter la distance entre l'équipement et le récepteur.
Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.
Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de
conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (8 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT
SUR LE MATERIEL BROUILLEUR DU CANADA.
EN 55022 Compliance (Czech Republic Only)
VCCI Notice (Japan Only)
This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for
Information technology equipment. If this equipment is used near a radio or television receiver in a domestic
environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.
Class B ITE
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (9 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
MIC Notice (South Korea Only)
Class B Device
Please note that this device has been approved for non-business purposes and may be used in any
environment, including residential areas.
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All
equipment that works together (computer, monitor, printer, and so on) should have the same power supply
source.
The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in
the form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply socket,
which should be located near the equipment and easily accessible.
A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of
standards PN-93/T-42107 and PN-89/E-06251.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (10 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
North Europe Information (Nordic Countries)
Placering/Ventilation
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR
DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT
ER NEMT TILGÆNGELIGE.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (11 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR
STØMTILFØRSEL ER LETTE Å NÅ.
BSMI Notice (Taiwan Only)
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch
Röntgenstrahlen" festgelegten Vorschriften.
Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme
hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs. 4 der
Röntgenverordnung erfüllt sind.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (12 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß
1. Reparaturen nur durch Fachpersonal durchgeführt werden.
2. nur original-Ersatzteile verwendet werden.
3. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.
Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem
Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem
Zeichenkontrast wären die Folge).
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.
ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß
NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.
End-of-Life Disposal
Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your
product to increase the amount of reusable materials and to minimize the amount to be disposed of.
Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.
Information for UK only
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (13 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
WARNING - THIS APPLIANCE MUST BE EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A
plug. To change a fuse in this type of plug proceed as
follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or
BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate 3-pin plug fitted in its
place.
If the mains plug contains a fuse, this should have a value
of 5A. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5A.
Note: The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance
with the following code:
BLUE - "NEUTRAL" ("N")
BROWN - "LIVE" ("L")
GREEN & YELLOW - "EARTH" ("E")
1. The GREEN AND YELLOW wire must be connected to
the terminal in the plug which is marked with the letter "E"
or by the Earth symbol
AND YELLOW.
or coloured GREEN or GREEN
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (14 of 15)2005-04-08 ¤W¤È 11:20:06
Regulatory Information
2. The BLUE wire must be connected to the terminal which
is marked with the letter "N" or coloured BLACK.
3. The BROWN wire must be connected to the terminal
which marked with the letter "L" or coloured RED.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply
over the three wires.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/regs/regulat.htm (15 of 15)2005-04-08 ¤W¤È 11:20:06
Other Related Information
Other Related Information
Information for Users in the U. S.
For units set at 115 V :
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord
a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
For units set at 230 V:
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord
a maximum of 15-feet long and a tandem blade, grounding type attachment plug rated 15 A, 250 V.
Information for Users outside the U.S.
For units set at 230 V:
Use a Cord Set rated minimum 5 A, 250 V ( for units set at 230V ) or 10A, 125V (for units set at
115V). The Cord Set should have the appropriate safety approvals for the country in which the
equipment will be installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/107C/SAFETY/saf_other.htm2005-04-08 ¤W¤È 11:20:06
6G3B11 Multimedia Base (option)
6G3B11 Multimedia Base (option)
Technical Specifications*
• Output power
• Bass Boost
2 x 1.5W RMS / 36W PMPO
• Headphone connection
• Microphone in/out
• Includes
3.5 mm jack
3.5 mm jack
Audio cable and AC adapter
9.4" x 2.1" x 8.2" / 239 x 54 x 208 mm
5W
• Dimension
• Power consumption
Description of the Controls
A. Bass button
Turn on or off to enhance the
Bass sound.
B. Power knob / Volume knob
If the picture has wavy
patterns when playing audio,
reduce the volume.Turn
clockwise to switch power on.
Turning the knob more will
increase the volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (1 of 5)2005-04-08 ¤W¤È 11:20:16
6G3B11 Multimedia Base (option)
C. Headphone jack
Attach your headphones here.
The loudspeakers will
automatically switch off once
headphones are connected.
D. Microphone jack
Attach your microphone here.
E. Audio In
Connect this to the audio
output of your PC.
F. MIC Out
Connect this to the
microphone output of your PC.
G. DC Input
Connect power input here.
Installing your Multimedia Pedestal
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (2 of 5)2005-04-08 ¤W¤È 11:20:16
6G3B11 Multimedia Base (option)
1. To INSTALL
●
●
Slide the pedestal, aligning with the holes on the
side.
Then click the back hook into the corresponding
hole on the bottom plate of your monitor.
2. To UN-INSTALL
●
●
Lift the back hook from the hole on the bottom
plate of your monitor.
Slide out the pedestal the opposite direction
(from when you installed it).
Power adapter Installation
Installing the adapter
There are two (2) ways of installing the adapter
A. T-connector
B. Wall more connector
Monitor
T-connector
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (3 of 5)2005-04-08 ¤W¤È 11:20:16
6G3B11 Multimedia Base (option)
Multimedia Base
PC power cord.
Transformer
Power outlet
DC input
PC
Note:
Please keep
transformer away from
monitor as far as possible ( at
least 50 cm ) to avoid cansing unstable monitor picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (4 of 5)2005-04-08 ¤W¤È 11:20:16
6G3B11 Multimedia Base (option)
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (5 of 5)2005-04-08 ¤W¤È 11:20:16
The OSD Controls
The OSD Controls
BRIGHTNESS
To adjust your screen's brightness, follow the steps below. Brightness is the overall intensity of the
light coming from the screen. A 50% brightness is recommended.
1) Press the
button on the monitor. The BRIGHTNESS window appears.
2) Press the
or
button to adjust the brightness.
3) When the brightness is adjusted to the level desired, press
window will disappear with the new adjustment saved.
to confirm and the BRIGHTNESS
CONTRAST
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (1 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the
light and dark areas on the screen. A 100% contrast is recommended.
1) Press the
button on the monitor. The CONTRAST window appears.
2) Press the
or
button to adjust the contrast.
3) When the contrast is adjusted to the level desired, press
window will disappear with the new adjustment saved.
to confirm and the CONTRAST
LANGUAGE
The ON SCREEN DISPLAY shows its settings in one of eight languages. The default is English, but
you can select French, Spanish, German, Italian, Simplify-Chinese, Korea, or Portuguese.
1) Press the
button on the monitor. The MAIN CONTROLS window appears. LANGUAGE
should be highlighted.
2) Press the
button again. The LANGUAGE window appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (2 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
3) Press the
4) Press the
or
button until the desired language is highlighted.
button to confirm your selection and return to MAIN CONTROLS window. CLOSE
MAIN CONTROLS will be highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (3 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
ZOOM
ZOOM increases or decreases the size of the images on your screen. To adjust the ZOOM follow
the steps below.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ZOOM is highlighted.
3) Press the
button. The ZOOM window appears.
4) Press the
or
button to adjust ZOOM.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (4 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
5) Press the
button to confirm your selection and Press
again return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
ADJUST HORIZONTAL
ADJUST POSITION under ADJUST HORIZONTAL shifts the image on your screen either to the left
or right. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST
HORIZONTAL expands or controls the image on your screen, pushing it out toward the left and
right sides or pulling it in toward the center.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ADJUST HORIZONTAL is highlighted.
3) Press the
highlighted.
button. The ADJUST HORIZONTAL window appears. POSITION should be
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (5 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
4) Press the
or
button to move the image to the left or right.
5) When the position is adjusted, press the
press to confirm.
button to confirm. Press the
to highlight SIZE,
6) To adjust the horizontal size, press the
7) When the size is adjusted, press the
or
button.
button to confirm. Press
again to return to MAIN
CNTROLS sindow. CLOSE MAIN CONTROLS will be highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (6 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
ADJUST VERTICAL
ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down.
Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL
expands or controls the image on your screen, pushing it out toward the top or bottom or pulling it in
toward the center.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ADJUST VERTICAL is highlighted.
3) Press the
highlighted.
button. The ADJUST VERTICAL window appears. POSITION should be
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (7 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
4) Press the
or
button to move the image up or down.
5) When the position is adjusted, press the
button. Press
again to return to MAIN
to confirm.
CONTROLS window, or press the
to highlight SIZE and
6) To adjust the vertical size, press the
7) When the size is adjusted, press the
or
button.
button to confirm. Press
return to MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (8 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
ADJUST SHAPE
ADJUST SIDE CURVE
ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options.
These two options are PINCUSHION and BALANCED pincushion. Note: use these features only
when the picture is not square.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ADJUST SHAPE is highlighted.
3) Press the
highlighted.
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (9 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
4) Press the
button. The SIDE CURVE window appears. PINCUSHION should be highlighted.
Press
to confirm.
5) To adjust the pincushion, press the
or
button,press the
to confirm.
6) When the pincushion is adjusted, press the
confirm.
button to highlight BALANCED. Press
to
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (10 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
7) To adjust the balanced pincushion, press the
or
button.Press
to confirm.
8) When the balanced pincushion is adjusted, press the button to return to the ADJUST
SHAPE window. BACK TO MAIN WINDOWS will be highlighted.
9) Press the
button to return to the MAIN CONTROLS window, or press the
button until
ADJUST SIDE ANGLES is highlighted.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options.
These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when
the picture is not square.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ADJUST SHAPE is highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (11 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
3) Press the
highlighted.
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be
4) Press the
5) Press the
button to highlight ADJUST SIDE ANGLES.
button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted,
press
to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (12 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
6) To adjust the trapezoid, press the
or
button.
7) When the trapezoid is adjusted, press the
PARALLELOGRAM, press to confirm.
button to confirm. Then
to highlight
8) To adjust the parallelogram, highlight parallelogram then
button to adjust..
to confirm. Press the
or
9) When the parallelogram is adjusted, press the
button to confirm. Press
again to return to
the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (13 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
10) Press the
button to return to the MAIN CONTROLS window, or press the
button until
ROTATE IMAGE is highlighted.
ROTATE IMAGE (Not available in all models)
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These
two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the
picture is not square.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ADJUST SHAPE is highlighted.
3) Press the
highlighted.
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be
button until ROTATE IMAGE is highlighted.
4) Press the
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (14 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
5) Press the
button. The ROTATE IMAGE window appears. ROTATE should be highlighted.
6) To adjust the rotation, press the
or
button.
7) When the rotation is adjusted, press the
button to confirm. Press
to return to the
ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted.
8) Press the button to return to MAIN CONTROLS.
ADJUST COLOR
Your monitor has three preset options you can choose from. The first option is for GENERAL USE,
which is fine for most applications. The second option is for IMAGE MANAGEMENT, which includes
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (15 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
projects such as desktop publishing, viewing a DVD from your DVD player or pictures on the World
Wide Web, and playing video games. The third option is for PHOTO RETOUCH, which is for
working with pictures you have imported into your computer and want to alter. When you select one
of these options, the monitor automatically adjusts itself to that option. There is also a fourth option,
USER PRESET, which allows you to adjust the colors on your screen to a setting you desire.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until ADJUST COLOR is highlighted.
3) Press the
button. The ADJUST COLOR window appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (16 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
4) Press the
or
button to highlight 9300K for GENERAL USE, 6500K for IMAGE
MANAGEMENT, 5500K for PHOTO RETOUCH, or USER PRESET.
5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH,
press the
button to confirm you selection. Press
again to return to the MAIN CONTROLS
window. CLOSE MAIN CONTROLS will be highlighted.
6a) If USER PRESET is highlighted, press the
button to highlight RED. Next, press the
to
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (17 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
confirm. Press
or
button to adjust the color red.
6b) When finished with RED, press
press to confirm.Next, press the
to confirm. Press the
button to highlight GREEN.
or
button to adjust the color green.
6c) When finished GREEN, press
to confirm. Next, press the
to confirm.Then, press
button to highlight BLUE.Press
or
button to adjust the color blue.
6d) When all adjustments are complete, press the
button to confirm your adjustments and
return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
RESET TO FACTORY SETTINGS
RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until RESET TO FACTORY SETTINGS is highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (18 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
3) Press the
4) Press the
button. The RESET TO FACTORY SETTINGS window appears.
or
button to select YES or NO. NO is the default. YES returns all settings to
their original factory adjustments.
5) Press the
button to confirm your selection and press
again return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
EXTRA CONTROLS
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (19 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
DEGAUSS
EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes
electromagnetic build up that may distort the color on your screen.
1) Press the
2) Press the
button on the monitor. The MAIN CONTROLS window appears.
button until EXTRA CONTROLS is highlighted.
3) Press the
4) Press the
button. The EXTRA CONTROLS window appears. MOIRE will be highlighted.
button to highlight DEGAUSS.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (20 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
5) To degauss your screen, press the
button. Your screen will be degaussed, then the MAIN
CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
ADJUST MOIRE (Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern
arising from the interference between two superimposed line patterns. To adjust your moire, follow
the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be
affected.
1) Press the
2) Press
button on the monitor. The MAIN CONTROLS window appears.
button until EXTRA CONTROLS is highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (21 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
3) Press the
highlighted.
button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be
4) Press the
button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted,
press
to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (22 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
5) To adjust the horizontal moire, press the
or
button.
6) When the horizontal moire is adjusted, press
VERTICAL.
to confirm. Press the
button to highlight
7) To adjust the vertical moire, press
to confirm. Then press
or
button to adjust.
8) When the vertical moire is adjusted, press the
to confirm. Press the
button to return to
the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be highlighted.
CLOSE MAIN CONTROLS
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (23 of 24)2005-04-08 ¤W¤È 11:20:22
The OSD Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (24 of 24)2005-04-08 ¤W¤È 11:20:22
F1rst Choice Warranty
Your Philips F1rst Choice Warranty
Thank you for purchasing this Philips monitor.
All Philips monitors are designed and manufactured to high standards and deliver
high-quality performance, ease of use and ease of installation. Should you
encounter any difficulties while installing or using this product, please contact the
Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This
three-year service warranty entitles you to a swap model on-site if your monitor
turns out to be faulty or defective.Philips aims at a swap within 48 hours of your call
being received.
What is covered?
The Philips F1rst Choice Warranty applies within Andorra, Austria, Belgium, Cyprus, Denmark,
France, Germany, Greece, Finland, Ireland, Italy, Liechtenstein, Luxembourg, Monaco, the
Netherlands, Norway, Portugal, Sweden, Switzerland, Spain and the United Kingdom and only for
monitors originally designed, manufactured, approved and/or authorized for usage within these
countries.
Warranty coverage begins as from the day you buy your monitor. For three years thereafter, your
monitor will be swapped by at least an equivalent monitor in case of defects provided for under the
warranty coverage.
The swap monitor remains yours and Philips keeps the defective/original monitor. For the swap
monitor the warranty period remains equal to that of your original monitor, being 36 months as from
the purchase date of your original monitor.
What is excluded?
The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended
use, in accordance with its operating instructions and upon presentation of the original invoice or
cash receipt, indicating the date of purchase, dealer's name and model and production number of
the product.
The Philips F1rst Choice Warranty may not apply if:
●
The documents have been altered in any way or made illegible;
●
The model or production number on the product has been altered, deleted, removed or made
illegible;
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/war_1st.htm (1 of 3)2005-04-08 ¤W¤È 11:20:26
F1rst Choice Warranty
●
Repairs or product modifications and alterations have been executed by unauthorized service
organizations or persons;
●
●
Damage is caused by accidents including but not limited to lightning, water or fire, misuse or
neglect;
Reception problems caused by signal conditions or cable or antenna systems outside the
unit;
●
●
Defects caused by abuse or misuse of the monitor;
Product requires modification or adaptation to enable it to comply with local or national
technical standards, which apply in countries for which the product was not originally
designed, manufactured, approved and/or authorized. Therefore always check whether a
product can be used in a specific country.
●
Note that products that are not originally designed, manufactured, approved and/or
authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips
F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.
Just a click away
In case of any problems, we advise you to read the operating instructions carefully or go to the www.
philips.com/support website for additional support.
Just a phone call away
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
Philips helpdesk.
To solve your problem quickly, please prepare the following details before contacting the Philips
helpdesk:
●
●
●
●
Philips type number
Philips serial number
Purchase date (copy of purchase may be required)
PC environment Processor:
❍
❍
❍
286/386/486/Pentium Pro/Internal memory
Operating system (Windows, DOS, OS/2, MAC)
Fax/Modem/Internet program?
●
Other cards installed
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/war_1st.htm (2 of 3)2005-04-08 ¤W¤È 11:20:26
F1rst Choice Warranty
Having the following information available will also help speed up the process:
●
●
Your proof of purchase indicating: date of purchase, dealer name, model and product serial
number.
The full address to which the faulty monitor has to be collected and the swap model should
be delivered.
Or you can reach us via:
Website: http://www.philips.com/support
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/war_1st.htm (3 of 3)2005-04-08 ¤W¤È 11:20:26
Your Guarantee in Central and Eastern Europe
Your Guarantee in Central and Eastern Europe
Dear Customer,
Thank you for purchasing this Philips product, which has been designed and manufactured to the
highest quality standards. If, unfortunately, something should go wrong with this product Philips
guarantees free of charge labor and replacement parts during a period of 36 months from date of
purchase.
What is covered?
This Philips Guarantee in Central and Eastern Europe applies within Czech Republic, Hungary,
Slovakia, Slovenia, Poland, Russia and Turkey and only for monitors originally designed,
manufactured, approved and/or authorized for usage within these countries.
Warranty coverage begins as from the day you buy your monitor. For 3 years thereafter, your
monitor will be serviced in case of defects provided for under the warranty coverage.
What is excluded?
The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer's name and model and production number of the
product.
The Philips guarantee may not apply if:
●
●
the documents have been altered in any way or made illegible;
the model or production number on the product has been altered, deleted, removed or made
illegible;
●
●
●
repairs or product modifications and alterations have been executed by unauthorized service
organizations or persons;
damage is caused by accidents including but not limited to lightning, water or fire, misuse or
neglect.
Reception problems caused by signal conditions or cable or antenna systems outside the
unit;
●
●
Defects caused by abuse or misuse of the monitor;
Product requires modification or adaptation to enable it to comply with local or national
technical standards, which apply in countries for which the product was not originally
designed, manufactured, approved and/or authorized. Therefore always check whether a
product can be used in a specific country.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_EEU.HTM (1 of 2)2005-04-08 ¤W¤È 11:20:27
Your Guarantee in Central and Eastern Europe
Please note that the product is not defective under this guarantee in the case where modifications
become necessary in order for the product to comply with local or national technical standards
which apply in countries for which the product was not originally designed and/or manufactured.
Therefore always check whether a product can be used in a specific country.
Just a click away
In case of any problems, we advise you to read the operating instructions carefully or go to the www.
philips.com/support website for additional support.
Just a phone call away
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
carefully before contacting our dealers or Information Centers
In case your Philips product is not working correctly or is defective, please contact your Philips
Website:www.philips.com/support
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_EEU.HTM (2 of 2)2005-04-08 ¤W¤È 11:20:27
International Guarantee
Your International Guarantee
Dear Customer,
Thank you for purchasing this Philips product which has been designed and manufactured to the
highest quality standards.
If, unfortunately, something should go wrong with this product Philips guarantees free of charge
labor and replacement parts irrespective of the country where it is repaired during a period of 12
months from date of purchase. This international Philips guarantee complements the existing
national guarantee obligations to you of dealers and Philips in the country of purchase and does not
affect your statutory rights as a customer.
The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer's name and model and production number of the
product.
The Philips guarantee may not apply if:
●
●
the documents have been altered in any way or made illegible;
the model or production number on the product has been altered, deleted, removed or made
illegible;
●
●
repairs or product modifications and alterations have been executed by unauthorized service
organizations or persons;
damage is caused by accidents including but not limited to lightning, water or fire, misuse or
neglect.
Please note that the product is not defective under this guarantee in the case where modifications
become necessary in order for the product to comply with local or national technical standards
which apply in countries for which the product was not originally designed and/or manufactured.
Therefore always check whether a product can be used in a specific country.
In case your Philips product is not working correctly or is defective, please contact your Philips
dealer. In the event you require service whilst in another country a dealer address can be given to
you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can
be found in the relevant part of this booklet.
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
carefully before contacting your dealer. If you have questions which your dealer cannot answer or
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_INTL.HTM (1 of 2)2005-04-08 ¤W¤È 11:20:27
International Guarantee
Website: http://www.philips.com
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_INTL.HTM (2 of 2)2005-04-08 ¤W¤È 11:20:27
United States Guarantee
Philips F1rst Choice Warranty (USA / Canada)
Thank you for purchasing this Philips monitor.
All Philips monitors are designed and manufactured to high standards and
deliver high-quality performance, ease of use and ease of installation. Should
you encounter any difficulties while installing or using this product, please
contact Philips directly to benefit from your Philips F1rst Choice Warranty. This
three-year service warranty entitles you to a swap model on-site within 48
hours of your call being received within the first year of purchase. If you have
any problems with your monitor within the second or third year of purchase, we
will repair it after it has been sent to the service provider at your expense and
returned to you within five working days, free of charge.
LIMITED WARRANTY (Computer Monitor)
Click here to access the Warranty Registration Card
Three Years Free Labor / Three Years Free Service on Parts / One Year Exchange*
*Product will be exchanged with a new or renewed to original specifications unit within two
business days for the first year. This product must be shipped in at your expense for service during
years two and three.
WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales receipt or other document
showing that you purchased the product is considered proof of purchase. Attach it to this owner's
manual and keep both nearby.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For three years thereafter, all parts will be
repaired or replaced, and labor is free. After three years from the day of purchase, you pay for the
replacement or repair of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for the original warranty period.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_USA.HTM (1 of 4)2005-04-08 ¤W¤È 11:20:28
United States Guarantee
When the warranty on the original product expires, the warranty on all replaced and repaired
products and parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
●
●
●
●
labor charges for installation or setup of the product, adjustment of customer controls on the
product, and installation or repair of antenna systems outside of the product.
product repair and/or part replacement because of misuse, accident, unauthorized repair or
other cause not within the control of Philips Consumer Electronics.
reception problems caused by signal conditions or cable or antenna systems outside the
unit.
a product that requires modification or adaptation to enable it to operate in any country other
than the country for which it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
●
incidental or consequential damages resulting from the product. (Some states do not allow
the exclusion of incidental or consequential damages, so the above exclusion may not apply
to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not
copyrighted.)
●
●
a product used for commercial or institutional purposes.
the model or production number on the product has been altered, deleted, removed or made
illegible.
Where IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is officially distributed by Philips
Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the
product, the local Philips service organization will attempt to provide service (although there may be
a delay if the appropriate spare parts and technical manual(s) are not readily available).
Where CAN I GET MORE INFORMATION?
For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A.
customers only) or (919) 573-7855.
Before Requesting Service...
Please check your owner's manual before requesting service. Adjustments of the controls
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_USA.HTM (2 of 4)2005-04-08 ¤W¤È 11:20:28
United States Guarantee
discussed there may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS...
Contact the Philips Customer Care Center phone number listed below for product assistance and
procedures for servicing:
Philips Customer Care Center
(877) 835-1838 or (919) 573-7855
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties
of merchantability and fitness for a particular purpose, are limited in duration to the duration of this
express warranty. But, because some states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
(800) 479-6696
Three years free parts and three years free labor will be provided at Philips Canada depot or any
one of its authorized service centers.
(In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed
or implied, including any implied warranties of merchantability or fitness for a particular purpose.
Philips is not liable under any circumstances for any direct, indirect, special, incidental or
consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
REMEMBER... Please record the model and serial numbers found on the product below.
MODEL # ________________________________________________
SERIAL # ________________________________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_USA.HTM (3 of 4)2005-04-08 ¤W¤È 11:20:28
United States Guarantee
This warranty gives you specific legal rights. You may have other rights which vary from state/
province to state/province.
Before contacting Philips, please prepare the following details so we can solve your problem
quickly.
●
●
●
●
Philips type number
Philips serial number
Purchase date (copy of purchase may be required)
PC environment Processor:
❍
❍
❍
286/386/486/Pentium Pro/Internal memory
Operating system (Windows, DOS, OS/2, MAC)
Fax/Modem/Internet program?
●
●
●
Other cards installed
Having the following information available will also help speed up the process:
Your proof of purchase indicating: date of purchase, dealer name, model and product serial
number.
The full address to which the faulty monitor has to be collected and the swap model should
be delivered.
Just a phone call away
Philips' customer help desks are located worldwide. Within the U.S. you can contact Philips
customer care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from
10:00 AM-5:00 PM ET hrs by using one of the contact phone numbers.
For more information on this and more great Philips products visit our website at:
Website: http://www.philips.com
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_USA.HTM (4 of 4)2005-04-08 ¤W¤È 11:20:28
F1rst Choice Contact Information
F1rst Choice Contact Information
Country
Telephone number
01 546 575 603
070 253 010
800 92256
Tariff
Austria
Local call tariff
0.17
Belgium
Cyprus
Free of Charge
Local call tariff
Local call tariff
0.23
Denmark
Finland
3525 8761
09 2290 1908
08 9165 0006
0180 5 007 532
00800 3122 1223
01 601 1161
199 404 042
26 84 30 00
France
Germany
Greece
0.12
Local call tariff
Local call tariff
0.25
Ireland
Italy
Luxembourg
The Netherlands
Norway
Local call tariff
0.20
0900 0400 063
2270 8250
Local call tariff
Local call tariff
0.15
Portugal
Spain
2 1359 1440
902 888 785
08 632 0016
02 2310 2116
0207 949 0069
Sweden
Switzerland
United Kingdom
Local call tariff
Local call tariff
Local call tariff
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/warfirst.htm2005-04-08 ¤W¤È 11:20:35
Consumer Information Centers
Consumer Information Centers
Eastern Europe
BELARUS
Technical Centre of JV IBA
M. Bogdanovich str. 155
BY - 220040 Minsk
Tel: +375 17 217 33 86
BULGARIA
LAN Service
140, Mimi Balkanska Str.
Office center Translog
1540 Sofia, Bulgaria
tel: +359 2 960 2360
www.lan-service.bg
CZECH REPUBLIC
Xpectrum
Lužná 591/4
CZ - 160 00 Praha 6
Tel: 800 100 697
Email:[email protected]
www.xpectrum.cz
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (1 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
CROATIA
Renoprom d.o.o.
Mlinska 5, Strmec
HR - 41430 Samobor
+385 1 333 0974
ESTONIA
FUJITSU SERVICES OU
Akadeemia tee 21G
EE-12618 Tallinn
Tel: +372 6519900
www.ee.invia.fujitsu.com
HUNGARY
Serware Szerviz
Vizimolnár u. 2-4
HU - 1031 Budapest
Tel: +36 1 2426331
Email: [email protected]
www.serware.hu
LATVIA
ServiceNet LV
Jelgavas iela 36
LV-1055 Riga,
Tel: +371 7460399
Email: [email protected]
LITHUANIA
ServiceNet LT
Gaiziunu G. 3
LT – 3009 KAUNAS
Tel: +370 7400088
Email: [email protected]
www.servicenet.lt
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (2 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
ROMANIA
Blue Ridge Int'l Computers SRL
115, Mihai Eminescu St., Sector 2
RO - 020074 Bucharest
Tel.:+40 21 2101969
SERBIA&MONTENEGRO
Tehnicom Service d.o.o.
Bulevar Vojvode Misica 37B
YU – 11000 Belgrade
Tel: +381 11 3060 886
SLOVAKIA
Datalan Servisne Stredisko
Puchovska 8
SK - 831 06 Bratislava
Tel: +421 2 49207155
Email: [email protected]
SLOVENIA
PC HAND
Brezovce 10
SI - 1236 Trzin
Tel: +386 1 530 08 24
Email: [email protected]
POLAND
Zolter
ul.Zytnia 1
PL - 05-500 Piaseczno
Tel:+48 22 7501766
Email: [email protected]
www.zolter.com.pl
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (3 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
RUSSIA
Tel: +7 095 961-1111
Tel: 8-800-200-0880
Web-site: www.philips.ru
TURKEY
Türk Philips Ticaret A.S.
Yukari Dudullu Org.San.Bolgesi
2.Cadde No:22
34776-Umraniye/Istanbul
Tel: (0800)-261 33 02
UKRAINE
Comel
Shevchenko street 32
UA - 49030 Dnepropetrovsk
Tel: +380 562320045
www.csp-comel.com
Latin America
ANTILLES
Philips Antillana N.V.Kaminda A.J.E. Kusters 4
Zeelandia, P.O. box 3523-3051
Willemstad, Curacao
Phone: (09)-4612799
Fax : (09)-4612772
ARGENTINA
Vedia 3892 Capital Federal
CP:1430 Buenos Aires
Phone/Fax: (011)-4544 2047
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (4 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
BRASIL
Philips da Amazonia Ind. Elet.Ltda.
Rua Verbo Divino, 1400 -Sao Paulo-SP CEP-04719-002
Phone: 11 2121 0203 -São Paulo & 0800-701-0203 - Other Regions without São Paulo City.
CHILE
Philips Chilena S.A.
Avenida Santa Maria 0760
P.O. box 2687Santiago de Chile
Phone: (02)-730 2000
Fax : (02)-777 6730
COLOMBIA
Industrias Philips de Colombia
S.A.-Division de Servicio
CARRERA 15 Nr. 104-33
Bogota, Colombia
Phone: (01)-8000-111001 (toll free)
Fax : (01)-619-4300/619-4104
MEXICO
Consumer Information Centre
Norte 45 No.669
Col. Industrial Vallejo
C.P.02300, -Mexico, D.F.
Phone: (05)-3687788 / 9180050462
Fax : (05)-7284272
PARAGUAY
Av. Rca. Argentina 1780c/ Alfredo Seiferheld
P.O. BOX 605
Phone: (595 21)-664 333
Fax : (595 21)-664 336
Customer Desk:
Phone: 009 800 54 1 0004
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (5 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
PERU
Philips Peruana S.A.
Customer Desk
Comandante Espinar 719
Casilla 1841
Limab18
Phone: (01)-2136200
Fax : (01)-2136276
URUGUAY
Rambla O'Higgins 5303 Montevideo
Uruguay
Phone: (598)-619 66 66
Fax : (598)-619 77 77
Customer Desk:
Phone: 0004054176
VENEZUELA
Industrias Venezolanas Philips S.A.
Apartado Postal 1167
Caracas 1010-A
Phone: (02) 2377575
Fax : (02) 2376420
Canada
CANADA
Philips Electronics Ltd.
281 Hillmount Road Markham Ontario,
L6C 2S3
Phone: 800- 479-6696
Fax:905-887-3974
Pacific
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (6 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
AUSTRALIA
Philips Consumer Electronics
Customer Care Centre.
Level 1, 65 Epping Rd
North Ryde NSW 2113
Phone: 1300 363 391
Fax:+61 2 9947 0063
NEW ZEALAND
Philips New Zealand Ltd.
Consumer Help Desk
2 Wagener Place, Mt.Albert
P.O. box 1041
Auckland
Phone: 0800 477 999 (Toll Free)
Fax:0800 288 588
Asia
BANGLADESH
Philips Service Centre
100 Kazi Nazrul Islam
Avenue Kawran Bazar C/A
Dhaka-1215
Phone: (02)-812909
Fax : (02)-813062
CHINA
SHANHAI
Rm 1007, Hongyun Building, No. 501 Wuning road,
200063 Shanghai
P.R. China
Phone: 4008 800 008
Fax:21-52710058
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (7 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
HONG KONG
Philips Electronics Hong Kong Limited
Consumer Service
Unit A, 10/F. Park Sun Building
103-107 Wo Yi Hop Road
Kwai Chung, N.T.
Hong Kong
Phone: (852) 2619-9663
Fax: (852) 2481 5847
INDIA
Phone: (020)-712 2048 ext 2765
Fax:(020)-712 1558
BOMBAY
Philips India
Customer Relation Centre
Bandbox House
254-D Dr. A Besant Road, Worli
Bombay 400 025
CALCUTTA
Customer Relation Centre
7 justice Chandra Madhab Road
Calcutta 700 020
MADRAS
Customer Relation Centre
3, Haddows Road
Madras 600 006
NEW DELHI
Customer Relation Centre
68, Shivaji Marg
New Dehli 110 015
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (8 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
INDONESIA
Philips Group of Companies in Indonesia
Consumer Information Centre
Jl.Buncit Raya Kav. 99-100
12510 Jakarta
Phone: (021)-7940040 Ext 2100
Fax : (021)-7947511 / 7947539
KOREA
Philips Korea Ltd.
Philips House
C.P.O. box 3680
260-199, Itaewon-Dong.
Yongsan-Ku, Seoul 140-202
Phone: 080 600 6600 (Toll Free)
Fax:(02)709 1245
MALAYSIA
After Market Solutions Sdn Bhd,
Philips Authorised Service Center,
Lot 6, Jalan 225, Section 51A,
46100 Petaling Jaya,
Selangor Darul Ehsan,
Malaysia
Phone: (603)-7954 9619/ 7956 3695
Fax:(03)-7954 8504
Customer Careline: 1800-880-180
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (9 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
PAKISTAN
Philips Consumer Information Centre
Mbuarak manzil,
39, Garden Road, Saddar,
Karachi-74400
Phone: (9221)-2737 411-16
Fax:(9221)-2721 167
E-Mail:[email protected]
Web-site:www.philips.com.pk
PHILIPPINES
Philips Electronics&Lighting, Inc.
Consumer Electronics
48F PBCOM Tower
6795 Ayala Avenue cor VA Rufino St.
Salcedo Village
1227 Makati City, PHILS
Phone: (02)-888 0572 , Domestic Toll Free:1-800-10-PHILIPS or 1-800-10-744 5477
Fax:(02)-888 0571
SINGAPORE
Accord Customer Care Solutions Ltd
Authorized Philips Service Center
Consumer Service
620A Lorong 1 Toa Payoh
Singapore 319762
Phone:+65 6882 3999
Fax:+65 6250 8037
TAIWAN
Philips Taiwan Ltd.
Consumer Information Centre
13F, No. 3-1 Yuan Qu St., Nan Gang Dist.,
Taipei, 115, Taiwan
Phone: 0800-231-099
Fax:(02)-3789 2641
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (10 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
THAILAND
Philips Electronics Thailand Ltd.
26-28th floor, Thai Summit Tower
1768 New Petchburi Road
Khwaeng Bangkapi, Khet Huaykhwang
Bangkok 10320 Thailand
Phone : (66) 2-652 8652
email:cic [email protected]
Africa
MOROCCO
Philips Electronique Maroc
304,BD Mohamed V
Casablanca
Phone: (02)-302992
Fax : (02)-303446
SOUTH AFRICA
PHILIPS SA (PTY) LTD
Customer Care Centre
195 Main Road
Martindale, Johannesburg
P.O. box 58088
Newville 2114
Phone: +27 (0)11-471 5194
Fax : +27 (0)11-471 5123
Middle East
DUBAI
Philips Middle East B.V.
Consumer Information Centre
P.O.Box 7785
DUBAI
Phone: (04)-3353666
Fax : (04)-3353999
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (11 of 12)2005-04-08 ¤W¤È 11:20:43
Consumer Information Centers
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (12 of 12)2005-04-08 ¤W¤È 11:20:43
PHILIPS Warranty Card
8/16/02 12:38 PM Page 1
It Takes Only A Moment To
PROTECT YOUR INVESTMENT.
Congratulations on investing in a Philips product. It’s an important and intelligent decision that’s sure to reward you
for many years to come. To ensure you’ll get all of the privileges and protection that come with your purchase,
please complete your Warranty Registration Card within the next ten days.
SIMPLY MAIL THE CARD BELOW TO RECEIVE ALL
OF THESE BENEFITS TO WHICH YOU’RE ENTITLED.
WARRANTY VERIFICATION
Your prompt registration verifies your right to protection
under the terms and conditions of your warranty.
OWNER CONFIRMATION
Your completed Warranty Registration Card serves as confirmation
of ownership in the event of product loss or theft.
MODEL REGISTRATION
Returning the attached card right away guarantees you’ll receive
all information and special offers for which your purchase makes you eligible. So please act today!
www.philipsusa.com
DETACH AND MAIL PORTION BELOW.
WARRANTY
REGISTRATION CARD
Registering your product is an essential step to ensure that you receive all of the benefits you are entitled to as a
Philips customer. So complete the information below in ink, and drop this card in the nearest mailbox.
IMPORTANT - RETURN WITHIN TEN DAYS
Month
Day
Year
Mail This Card Today To Get The Most From Your Purchase!
No, I do not want to receive personalized offers about Philips products or other information from Philips in the future.
❏
3135 015 07803
rev. 7/02
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS Warranty Card
8/16/02 12:38 PM Page 2
! 1 3 7 5 4 1 5 3 3 8 !
D E P O S I T N Y 1 3 7 5 4 - 1 5 3 3
P O B O X 1 5 3 3
P r o m p t l y
P l e a s e O
M A T E
T I M E -
S T A M P
C L A S S
A P P L Y F I R S T
P L E A S E
a
IMPORTANT
Warranty
Registration Card
RETURN THE ATTACHED CARD WITHIN
TEN DAYS TO ENSURE YOUR:
✓ Warranty Verification
✓ Owner Confirmation
See Inside For
✓ Model Registration
Valuable
Benefits!
Download from Www.Somanuals.com. All Manuals Search And Download.
|