© 2012 Pella Corporation
Part Number: 807X0101
WINDOW REPLACEMENT INSTRUCTIONS FOR
CASEMENT, DOUBLE-HUNG AND CLAD FRAME WINDOWS
USING FRAME SCREWS
These instructions were tested and developed for replacing windows in wood-frame wall construction systems designed
to manage moisture. Installation recommendations for other types of wall construction, wall systems, conditions, multiple
windows or bow bay windows, may be obtained from Pella Corporation or a local Pella retailer. Building designs, construction
methods, building materials, and site conditions unique to your project may require an installation method different from these
instructions and additional care on your part. Determining the appropriate installation method is the responsibility of you, your
architect, or other construction professional.
Note: This instruction is not for use in applications that have vinyl, steel or aluminum siding where water may be behind the
siding above the window. In these applications, the siding may need to be removed and window installed using the new
construction installation instruction that is attached to the window.
YOU WILL NEED TO SUPPLY:
TOOLS REQUIRED:
Řꢀ7DSHꢀPHDVXUH
Řꢀ/HYHO
Řꢀ&HGDUꢀRUꢀ,PSHUYLRXVꢀVKLPVꢁVSDFHUVꢀꢂꢃꢄꢀWRꢀꢄꢅꢆ
Řꢀ&ORVHGꢀFHOOꢀIRDPꢀEDFNHUꢀURGꢁVHDODQWꢀEDFNHUꢀꢂꢃꢄꢀWRꢀꢇꢅꢀIWꢈꢆ
Řꢀ3HOODpꢀ6PDUW)ODVKŠꢀIRLOꢀEDFNHGꢀEXW\OꢀZLQGRZꢀDQGꢀGRRUꢀ
flashing tape or equivalent
Řꢀ6TXDUH
Řꢀ+DPPHU
Řꢀ3HOODꢀ:LQGRZꢀDQGꢀ'RRUꢀ,QVWDOODWLRQꢀ6HDODQWꢀRUꢀHTXLYDOHQWꢀ
KLJKꢀTXDOLW\ꢉꢀPXOWLꢊSXUSRVHꢀVHDODQWꢀꢂꢃꢀWXEHꢀSHUꢀZLQGRZꢆ
Řꢀ/RZꢀH[SDQVLRQꢉꢀORZꢀSUHVVXUHꢀSRO\XUHWKDQHꢀLQVXODWLQJꢀ
window and door foam sealant.
SEALANT
Řꢀ6FUHZGULYHUVꢀꢀ
ꢂꢋꢄꢀ3KLOOLSVꢀDQGꢀ)ODWꢀEODGHꢆ
Řꢀꢋꢃꢅꢀ7RU[ꢀGULYHUꢀELW
Řꢀ'ULOO
'2ꢀ127ꢀXVHꢀKLJKꢀSUHVVXUHꢀRUꢀODWH[ꢀIRDPV
Řꢀꢋꢌꢀ[ꢀꢇꢊꢃꢁꢌŔꢀ)LQLVKꢀKHDGꢀVFUHZV
ŘꢀꢃꢁꢌꢍꢀELW
Installation will require two or more people for safety reasons.
REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
Always read the Pella®
Limited Warranty before purchasing
or installing Pella products. By
installing this product, you are
acknowledging that this Limited
Warranty is part of the terms of
the sale. Failure to comply with all
Pella installation and maintenance
instructions may void your Pella
product warranty. See Limited
Warranty for complete details at
Flashing tape #1
Flashing tape #2
#8 x 3-1/8"
Finish head screw
Download from Www.Somanuals.com. All Manuals Search And Download.
Window Preparation (continued):
2
B. Double-Hung and Clad Frame:ꢀ2QꢀWKHꢀURRPꢀVLGHꢀRIꢀWKHꢀZLQGRZꢉꢀGULOOꢀꢃꢁꢌꢍꢀGLDPHWHUꢀFOHDUDQFHꢀKROHVꢀWKURXJKꢀWKHꢀIUDPHꢀDWꢀ
WKHꢀORFDWLRQVꢀVKRZQꢈꢀ6SDFHꢀWKHꢀKROHVꢀDꢀPD[LPXPꢀRIꢀꢏꢍꢀIURPꢀHDFKꢀHQGꢀDQGꢀDꢀPD[LPXPꢀRIꢀꢃꢏꢍꢀRQꢀFHQWHUꢈꢀ
Note: The lower sash must be raised to drill the holes in the sill of the double-hung window.
Designer Series®
and Pella® ProLine
Architect Series®
Double-Hung Head
Double-Hung Head
1/2"
Drill 1/8"
clearance hole
Drill 1/8"
clearance hole
Clad Frame Head
1"
Double-Hung Jamb
Double-Hung Jamb
Drill 1/8"
clearance hole
Drill 1/8"
clearance hole
1/4"
Drill 1/8"
clearance hole
Drill 1/8"
clearance hole
1"
Drill 1/8"
clearance hole
Drill 1/8"
clearance hole
1/2"
Clad Frame Sill
Double-Hung Sill
Double-Hung Sill
Setting and Fastening the Window:
3
A. Slide the window into the opening, placing the bottom of the window on the spacers at the bottom of the opening.
3RVLWLRQꢀWKHꢀZLQGRZꢀVRꢀWKDWꢀWKHꢀH[WHULRUꢀIDFHꢀRIꢀWKHꢀIUDPHꢀH[WHQGVꢀDꢀPLQLPXPꢀRIꢀꢇꢁꢎꢍꢀRQWRꢀWKHꢀH[WHULRUꢀZDOOꢀPDWHULDOꢀWRꢀ
DOORZꢀIRUꢀWKHꢀDSSOLFDWLRQꢀRIꢀEDFNHUꢀURGꢀDQGꢀVHDODQWꢀꢂ6HHꢀLOOXVWUDWLRQVꢀLQꢀ6WHSꢀꢎꢀIRUꢀVHDODQWꢀGHWDLOVꢆꢈꢀ&HQWHUꢀWKHꢀZLQGRZꢀ
EHWZHHQꢀWKHꢀVLGHVꢀRIꢀWKHꢀRSHQLQJꢀWRꢀDOORZꢀFOHDUDQFHꢀIRUꢀVKLPPLQJꢉꢀDQGꢀLQVHUWꢀRQHꢀꢋꢌꢀ[ꢀꢇꢊꢃꢁꢌꢍꢀŵQLVKꢀKHDGꢀVFUHZꢀLQWRꢀHDFKꢀ
of the top clearance holes. This will hold the window in place while shimming it plumb and square.
B. Place shims 1" from the bottom and top of the window between
the window and the sides of the opening and at the midpoint of the
ZLQGRZꢀVLGHꢈꢀ.HHSꢀVKLPVꢀEDFNꢀꢃꢁꢄꢍꢀIURPꢀLQWHULRUꢀIDFHꢀRIꢀZLQGRZꢈꢀ
ꢇ%
Adjust the shims as required to plumb and square the window in the
opening. Also shim behind all the pre-drilled clearance holes.
Note: Do not shim above the window or in the space between the
spacers at the bottom of the window. DO NOT over shim.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Fastening the Window (continued):
3
C. Fasten the window to the opening.ꢀ)LQLVKꢀQDLOLQJꢀWKHꢀLQWHULRUꢀWULPꢀWRꢀZDOOꢀWKHQꢀGULYHꢀꢋꢌꢀ[ꢀꢇꢊꢃꢁꢌꢍꢀŵQLVKꢀKHDGꢀVFUHZVꢀLQWRꢀ
each of the pre-drilled clearance holes.
Designer Series®
and Pella® ProLine
Architect Series®
Double-Hung Head
Double-Hung Head
1/2"
#8 x 3-1/8"
finish head
screw
#8 x 3-1/8"
finish head screw
Double-Hung Jamb
Double-Hung Jamb
Casement Head/Jamb
Clad Frame Head/Sill/Jamb
1"
#8 x 3-1/8"
finish head
screw
#8 x 3-1/8"
finish head
screw
#8 x 3-1/8"
finish head screw
#8 x 3-1/8"
finish head screw
1/4"
#8 x 3-1/8"
finish head
screw
#8 x 3-1/8"
finish head screw
#8 x 3-1/8"
finish head screw
1/2"
Double-Hung Sill
Double-Hung Sill
Casement Sill
D. Check window operation (vent units only).
Architect Series® and Designer Series® Double-Hung: Cut the checkrail bands and remove the shipping spacers. Open
and close the window a few times to check for proper operation. Make sure the window will tilt correctly. Close and lock
the window.
ProLine® Double-Hung:ꢀ7RꢀUHPRYHꢀVLGHꢀVSDFHUVꢉꢀVOLGHꢀWKHPꢀXSꢀWRꢀDSSUR[LPDWHO\ꢀꢎꢍꢀDERYHꢀWKHꢀERWWRPꢀVDVKꢈꢀ/LIWꢀWKHꢀ
FOLSꢀE\ꢀWKHꢀLQWHULRUꢀOHJꢀDQGꢀURWDWHꢀXSZDUGꢀWRꢀUHPRYHꢈꢀ5DLVHꢀWKHꢀERWWRPꢀVDVKꢀDSSUR[LPDWHO\ꢀꢄꢍꢉꢀDQGꢀWLOWꢀWKHꢀVDVKꢀLQꢀE\ꢀ
depressing the jamb liner and pulling inward on the top corners of the sash. Remove the sash clips and return the sash
to its original position.
Casement: Unlock the window by lifting up on the lock handle. Turn the crank to open the window. Remove the shipping
spacers from between the sash and window frame. Close and lock the window.
Note: If there are any problems with the operation of the window, recheck shim locations and adjust for plumb and
square.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sealing the Window to the Exterior Wall Cladding:
:KHQꢀDSSO\LQJꢀVLGLQJꢉꢀEULFNꢀYHQHHUꢀRUꢀRWKHUꢀH[WHULRUꢀŵQLVKꢀPDWHULDOꢉꢀOHDYHꢀDGHTXDWHꢀVSDFHꢀEHWZHHQꢀWKHꢀZLQGRZꢀIUDPHꢀDQGꢀ
the material for sealant. Refer to the illustration corresponding to your finish material.
Note: The sealant details shown are standard recommendations from the sealant industry. Contact your sealant supplier
for recommendations and instructions for these and any other applications.
4
WOOD SIDING
WITH TRIM
BRICK VENEER
WOOD
SIDING
Backer Rod and
Sealant typical
Sealant typical
Sealant typical
3/8" Clearance
3/8" Clearance
Accessory Groove
Insulate
and
seal per
Step 5
Insulate
and
seal per
Step 5
1/8" Clearance
Accessory
Groove
Insulate
and
seal per
Step 5
Accessory Groove
Perimeter Sealant
must extend to room
side of Accessory
Groove.
Perimeter Sealant
must extend to room
side of Accessory
Groove.
3/8"
3/8"
1/8"
1/2"
Min.
1/2"
Min.
A. Insert backer rod into the space around the window as deep as it will go.
7KLVꢀVKRXOGꢀSURYLGHꢀDWꢀOHDVWꢀDꢀꢃꢁꢄꢍꢀFOHDUDQFHꢀEHWZHHQꢀWKHꢀEDFNHUꢀURGꢀDQGꢀWKHꢀ
H[WHULRUꢀIDFHꢀRIꢀWKHꢀZLQGRZꢈ
ꢎ$
Note: Backer rod adds shape and depth for the sealant line.
B. Apply a bead of high quality exterior grade sealant to the entire perimeter
of the window.
ꢎ%
C. Shape, tool and clean excess sealant. When finished, the sealant should be
the shape of an hourglass.
Note: This method creates a more flexible sealant line capable of expanding
and contracting.
Interior Seal:
5
Caution: Ensure use of low pressure polyurethane window and door installation foams and strictly follow the foam
manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may
cause the window to bow and hinder operation.
A. Apply insulating foam sealant. From the interior, insert the nozzle of the applicator
5A
DSSUR[LPDWHO\ꢀꢃꢍꢀGHHSꢀLQWRꢀWKHꢀVSDFHꢀEHWZHHQꢀWKHꢀZLQGRZꢀDQGꢀWKHꢀURXJKꢀRSHQLQJꢀ
DQGꢀDSSO\ꢀDꢀꢃꢍꢀGHHSꢀEHDGꢀRIꢀIRDPꢈꢀ7KLVꢀZLOOꢀDOORZꢀURRPꢀIRUꢀH[SDQVLRQꢀRIꢀWKHꢀIRDPꢀDQGꢀ
will minimize squeeze out. Apply sealant across interior surface of shims to create a
FRQWLQXRXVꢀVHDOꢈꢀ)RUꢀZLQGRZVꢀZLWKꢀMDPEꢀH[WHQVLRQVꢀLQVWDOOHGꢉꢀHQVXUHꢀWKHꢀIRDPꢀLVꢀSODFHGꢀ
EHWZHHQꢀWKHꢀZLQGRZꢀIUDPHꢀDQGꢀWKHꢀURXJKꢀRSHQLQJꢉꢀQRWꢀEHWZHHQꢀWKHꢀMDPEꢀH[WHQVLRQꢀ
and the rough opening. Follow foam manufacturer's instructions.
Note: It may be necessary to squeeze the end of the tube with pliers to be able to insert
into the space between the window frame and the rough opening. DO NOT completely fill
the space from the back of the backer rod to the interior face of the opening.
B. Check window operation (vent units only) by opening and closing the window.
Note: If the window does not operate correctly, check to make sure it is still plumb, level, square and that the sides are not
bowed. If adjustments are required, remove the foam with a serrated knife. Adjust the shims, and reapply the insulating
foam sealant.
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior Finishing:
6
Visible wood surfaces of Pella® products must be finished. Failure to do so voids the Limited Warranty. If products cannot
be finished immediately, cover with clear plastic film to protect from dirt, damage and moisture. Remove any construction
residue before finishing. Sand all wood surfaces lightly with 180 grit or finer sandpaper. DO NOT use steel wool. BE
&$5()8/ꢀ127ꢀ72ꢀ6&5$7&+ꢀ7+(ꢀ*/$66ꢈꢀ5HPRYHꢀVDQGLQJꢀGXVWꢈ
Note: To maintain proper product performance do not paint, finish or remove the weather-stripping, mohair dust pads,
gaskets or vinyl parts. Air and water leakage will result if these parts are removed. If paint, stain or finish gets on the mohair
weather-stripping, immediately blot it thoroughly with a rag and allow it to dry. Flake off any remaining residue. After
finishing, allow windows to dry completely before closing them.
Pella Corporation is not responsible for finishing imperfections. Use of inappropriate finishes, solvents, brickwash or
cleaning chemicals will cause adverse reactions with window and door materials and voids the Limited Warranty.
EXTERIOR FINISH
7KHꢀH[WHULRUꢀIUDPHꢀDQGꢀVDVKꢀDUHꢀSURWHFWHGꢀE\ꢀDOXPLQXPꢀFODGGLQJꢀZLWKꢀRXUꢀWRXJKꢀ(QGXUD&ODGpꢀRUꢀ(QGXUD&ODGꢀ3OXVꢀEDNHGꢊ
on factory finish that needs no painting. Clean this surface with mild soap and water. Stubborn stains and deposits may be
removed with mineral spirits. DO NOT use abrasives. DO NOT scrape or use tools that might damage the surface.
Use of inappropriate finishes, solvents, brickwash or cleaning chemicals will cause adverse reactions with window and door
materials and voids the Limited Warranty.
CARE AND MAINTENANCE
Care and maintenance information is available in the Pella Owner’s Manual. You can obtain an owner’s manual by
IMPORTANT NOTICE
Because all construction must anticipate some water infiltration, it is important that the wall system be designed and
constructed to properly manage moisture. Pella Corporation is not responsible for claims or damages caused by
anticipated and unanticipated water infiltration; deficiencies in building design, construction and maintenance; failure to
install Pella® products in accordance with Pella installation instructions; or the use of Pella products in wall systems which
do not allow for proper management of moisture within the wall systems. The determination of the suitability of all building
components, including the use of Pella products, as well as the design and installation of flashing and sealing systems are
the responsibility of the Buyer or User, the architect, contractor, installer, or other construction professional and are not the
responsibility of Pella.
Pella products should not be used in barrier wall systems which do not allow for proper management of moisture within the
ZDOOꢀV\VWHPVꢉꢀVXFKꢀDVꢀEDUULHUꢀ([WHULRUꢀ,QVXODWLRQꢀDQGꢀ)LQLVKꢀ6\VWHPVꢉꢀꢂ(,)6ꢆꢀꢂDOVRꢀNQRZQꢀDVꢀV\QWKHWLFꢀVWXFFRꢆꢀRUꢀRWKHUꢀQRQꢊ
ZDWHUꢀPDQDJHGꢀV\VWHPVꢈꢀ([FHSWꢀLQꢀWKHꢀVWDWHVꢀRIꢀ&DOLIRUQLDꢉꢀ1HZꢀ0H[LFRꢉꢀ$UL]RQDꢉꢀ1HYDGDꢉꢀ8WDKꢉꢀDQGꢀ&RORUDGRꢉꢀPella makes
no warranty of any kind and assumes no responsibility for Pella windows and doors installed in barrier wall systems. In
the states listed above, the installation of Pella products in barrier wall or similar systems must be in accordance with Pella
installation instructions.
Product modifications that are not approved by Pella Corporation will void the Limited Warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING ROTO COVER AND CRANK
Note: Finish the interior of the window and allow the window to dry before proceeding with these instructions. (To open
the window for finishing, partially insert the lock handle into the jamb, unlock the unit, temporarily attach the crank handle
and turn to open.)
A. Place the cover over the operator stud and snap into
Pocket End
B
place. Position the pocket end of the cover into place.
Note: If the cover does not have the screw hole, apply
pressure on the pocket end of the cover to snap the cover
into place and proceed to step C.
Screw Hole
Operator Stud
B. Insert the provided screw into the hole in the bottom
of the pocket. 8VHꢀDꢀꢋꢀꢃꢀ3KLOOLSVꢀVFUHZGULYHUꢀWRꢀVHFXUHꢀ
the pocket screw snug against the bottom of the
pocket to avoid scratching the crank handle knob. DO
NOT over tighten.
A
Crank Handle
D
Knob
E
Operator Stud
C. Use a medium size flat-blade screwdriver to loosen
the set screw in the crank handle.
D. Slide the crank handle onto the stud. Unlock, open
Set Screw
C
window, then close and lock window.
Pocket
E. Fold the crank handle down and check alignment of
knob with the pocket.
Note: You may need to adjust the crank position on the
stud until the correct alignment is achieved.
F. Open the crank and tighten the set screw.
*ꢈꢀAfter the final installation, fold the crank over and snap the knob into the pocket.
Note: Even with the window open the crank can be folded to avoid interferring with the window treatments.
CASEMENT WINDOW LOCK LEVER REMOVAL AND INSERTION
Note: You may want to remove the lock lever prior to finishing the window,
or if it needs to be replaced with a lock lever in a different finish.
C
Interior
Exterior
B
A. Unlock and open the window.
B. Place the lock lever in the locked position.
C. From the exterior of the window, insert a small flat-blade screwdriver
between the cam and lock lever near the bottom of the opening
between the stop and frame gasket.
D. Push the screwdriver inwards with a small amount of pressure; then turn
the blade slightly clockwise for a left hand unit, counter-clockwise for a
right hand unit. DO NOT over-twist the screwdriver, this can damage the
lock driver.
Exterior
E
F
Interior
Note: This will release the hook in the lever from the cam hook.
D
E. Remove the lock lever by pulling it toward the interior of the building.
F. To install a lock lever, hold it in the lock position and insert it, from the
interior, into the slot until it snaps into the cam.
© 2012 Pella Corporation
Part Number: 807X0101
Download from Www.Somanuals.com. All Manuals Search And Download.
|