Upgrade procedure for the Parrot
MK6000
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Select the Parrot MK6000 in the list and click on Next :
-
Then click on Download Latest version.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Click on OK when you see this warning.
- First, you have to select your language.
-
After selecting your language, the check box «
following step : click on Download Now)
□
With Text-To-Speech » may be available. (if not, just skip the
-
At this point you can choose either to :
•
Check the box : « ꢀ With Text-To-Speech » :
•
Or if you leave the box unchecked :
This means you want to activate the reading contacts
feature via the synthetic voice of the carkit.
The reading contact feature will not be activated and no
automatic synchronisation will be possible.
This configuration can be helpful if you are facing some
synchronisation issues or if you do not want to synchronise
all your phonebook with the carkit (only in case your phone
support automatic synchronisation).
The contacts that will be “read” are:
- The ones automatically synchronized by your phone (if
your phone support this feature)
- The ones sent manually (one by one or all together
depending on your phone capability)
In case you are using this configuration, you can still send
contacts one by one and record a voice print on the carkit.
(Check your user guide for more details).
-
Click then on "Download Now".
Download from Www.Somanuals.com. All Manuals Search And Download.
- Wait until the end of the download (The downloaded files will be stored in C:\Program Files\Parrot Flash Update
Wizard\Internet Files).
-
Click on OK.
-
Click on Next
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Select Serial connection and then click on Next
-
Select the COM port on which you have connected the serial cable and then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Wait until the end of the upgrade process.
-
-
-
Click on Finish.
You can now disconnect your carkit from the computer.
Your Parrot MK6000 is now up-to-date.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2. Upgrade via Bluetooth
For this procedure you will need a Bluetooth dongle, a computer running Windows and the Parrot Flash
Update Wizard program.
Follow the procedure described bellow:
-
Make sure that your Bluetooth dongle is correctly installed on your computer (refer to its user guide
for additional information).
-
Download and install the Parrot FlashUpdate Wizard program, then run it.
-
Click on Next,
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Select the Parrot MK6000 in the list and click Next :
-
Then click on Download Latest version.
-
Click on OK on this warning.
Download from Www.Somanuals.com. All Manuals Search And Download.
- First you have to select your language.
-
After selecting your language, the check box «
following step : click on Download Now)
□
With Text-To-Speech » may be available. (if not, just skip the
-
At this point you can choose either to :
•
Check the box : « ꢀ With Text-To-Speech » :
•
Or if you leave the box unchecked :
This means you want to activate the reading contacts
feature via the synthetic voice of the carkit.
The reading contact feature will not be activated and no
automatic synchronisation will be possible.
This configuration can be helpful if you are facing some
synchronisation issues or if you do not want to synchronise
all your phonebook with the carkit (only in case your phone
support automatic synchronisation).
The contacts that will be “read” are:
- The ones automatically synchronized by your phone (if
your phone support this feature)
- The ones sent manually (one by one or all together
depending on your phone capability)
In case you are using this configuration, you can still send
contacts one by one and record a voice print on the carkit.
(Check your user guide for more details).
-
Click then on "Download Now".
- Wait until the end of the download (The downloaded files will be stored in C:\Program Files\Parrot Flash Update
Wizard\Internet Files).
-
Click on OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Now you can disconnect you computer from the Internet if you want or if it is necessary: The
maximum distance between your computer and the kit when upgrading is about 10 meters.
-
Start the carkit : Red and green diodes should light on.
-
-
On the MK6000, turn the central knob and select the menu “update software by Bluetooth”.
On your computer, start your Bluetooth interface:
-
Launch a “Bluetooth devices search” with the software provided with your Bluetooth dongle or with
the Windows Bluetooth manager. (you may find such icon :
)
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Wait for the detection of your device: Parrot MK6000.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Select the Parrot MK6000 and click on its icon to start the service discovery.
-
The Bluetooth services supported by the Parrot MK6000 are now listed : 3 profiles are available.
Audio Sink, OBEX Object Push and Update (Serial port or SPP). Click on UPDATE.
-
The connexion will be set up and a popup will open :
-
Click on this popup.
-
Enter the Bluetooth PIN code : « 0000 »
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
Click on OK.
An outgoing COM Port number will be provided by the Bluetooth software during the connection.
Write it down, it will be required in the Parrot Flash Update Wizard. However depending on the
specificity of your Bluetooth interface it might be slightly different (refer to your Bluetooth equipment
user manual for further explanations) – In our example the outgoing COM Port is number 8)
-
Again on the Parrot Flash Update Wizard.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Click on Next
-
-
Select Bluetooth Virtual connexion.
Click on Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
Select the right COM port, which has been previously assigned (in our example it is COM8).
Click on Next.
-
Wait while the Parrot Flash update wizard is going through the different upgrade steps.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Wait for the automatic reboot of the kit. Do not stop the
power source! (this operation can takes few minutes)
-
-
Click on Finish.
Your Parrot MK6000 is now up to date.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.2 Other method (by Bluetooth)
You will need a Windows-based computer, a bluetooth USB dongle (or integrted bluetooth device).
You can use this method only if you’re using the Bluetooth manager provided with Microsoft Windows XP
Service Pack 2. (If necessary, Uninstall the driver provided with your bluetooth dongle and re-install the
Microsoft driver on the Windows update website).
To upgrade your kit, please use the following procedure:
- Make sure that your Bluetooth equipment is correctly installed.
- Download and install the Parrot Flash Update Wizard.
- Switch on your kit.
- On your MK6000, enable the upgrade menu (turn the central knob until the menu software upgrade by
bluetooth , then press on the rotator).
- Start the Parrot Flash Update Wizard.
-
Click on Next,
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Select the Parrot MK6000 in the list and click Next :
-
Then click on Download Latest version.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Click on OK on this warning.
- First you have to select your language.
- After selecting your language, the check box «
step : click on Download Now)
□
With Text-To-Speech » may be available. (if not, just skip the following
-
At this point you can choose either to :
•
Check the box : « ꢀ With Text-To-Speech » :
•
Or if you leave the box unchecked :
This means you want to activate the reading contacts
feature via the synthetic voice of the carkit.
The reading contact feature will not be activated and no
automatic synchronisation will be possible.
This configuration can be helpful if you are facing some
synchronisation issues or if you do not want to synchronise
all your phonebook with the carkit (only in case your phone
support automatic synchronisation).
The contacts that will be “read” are:
- The ones automatically synchronized by your phone (if
your phone support this feature)
- The ones sent manually (one by one or all together
depending on your phone capability)
In case you are using this configuration, you can still send
contacts one by one and record a voice print on the carkit.
(Check your user guide for more details).
-
Click then on "Download Now".
Download from Www.Somanuals.com. All Manuals Search And Download.
- Wait until the end of the download (The downloaded files will be stored in C:\Program Files\Parrot Flash Update
Wizard\Internet Files).
-
Click on OK.
-
Click on Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
Select Bluetooth connection and click on Next.
On the following windows, click on Search devices and wait while searching for visible devices.
-
-
-
In the list select Parrot MK6000.
Click on Next.
If requested enter the Bluetooth PIN code: « 0000 ».
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Wait while the Parrot Flash update wizard is going through the different upgrade steps.
-
Wait for the automatic reboot of the kit. Do not stop the
power source! (this operation can takes few minutes)
-
-
Click on Finish.
Your Parrot MK6000 is now up to date.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. If you experience any problems
Don’t hesitate to contact your retailer, he will be able to help you.
Download from Www.Somanuals.com. All Manuals Search And Download.
|