Hand-Held Sander
XQ2 Se
Hand-Held Sander
Operation and Safety Notes
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
8
4
5
6
7
a
C
b
d
90°
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Content
Introduction
Proper use......................................................................................................................Page
Features..........................................................................................................................Page
Included items ...............................................................................................................Page
Technical information....................................................................................................Page
6
6
6
7
General safety advice for electrical power tools
1. Workplace safety .....................................................................................................Page
2. Electrical safety.........................................................................................................Page
3. Personal safety..........................................................................................................Page
4. Careful handling and use of electrical power tools................................................Page
Safety advice relating specifically to this device.........................................................Page
7
7
8
8
9
Preparing for use...............................................................................................Page
9
Vacuum dust extraction.................................................................................................Page 10
Dust box for internal vacuum extraction......................................................................Page 10
Reducer piece................................................................................................................Page 10
Attaching/detaching sanding sheets..........................................................................Page 10
Rotating the backing plate............................................................................................Page 10
Advice on use................................................................................................................Page 11
Maintenance and cleaning.........................................................................Page 11
Disposal......................................................................................................................Page 11
Information
Service centre ...............................................................................................................Page 11
Warranty .......................................................................................................................Page 11
Declaration of Conformity/Manufacturer..................................................................Page 12
GB/IE/CY
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The following pictograms are used in these operating instructions/on the device:
Caution–electric shock!
Read instruction manual!
Danger to life!
Protect electrical power tools from
moisture!
Watts (Effective power)
W
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Volt (AC)
V
~
Wear hearing protection, dust protection
mask, protective glasses and protective
gloves.
Safety class II
Observe caution and safety notes!
Risk of explosion!
Danger of fire from flying sparks!
Dust hazard!
Keep children away from electrical
power tools!
Dispose packaging and appliance in
an environmentally-friendly way!
Hand-Held Sander
Introduction
dangers. We will not accept liability for loss or
damage arising from improper use.
Not suitable for commercial use.
Q
Q
Please make sure you familiarise yourself
fully with the way the device works
before you use it for the first time and
Features
1
2
3
4
5
6
7
8
Mains lead
Adapter port
that you understand how to handle electrical power
tools correctly. To help you do this please read the
accompanying operating instructions. Keep these
instructions in a safe place. If you pass the device
on to anyone else, please ensure that you also
pass on all the documentation.
Reducer piece for external vacuum extraction
Dust box for internal vacuum extraction
Release button - dust collection box
Ventilation slots
Patented backing plate (360° rotatable)
ON/OFF switch
Q
Proper use
Q
Included items
The device is intended for dry sanding and polishing
of wood, plastic, metal, filler and painted surfaces.
The device is particularly suitable for corners, pro-
files or difficult to access places. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
1 Hand-Held Sander
1 Sanding sheet
1 Reducer piece for external vacuum extraction
1 Operating instructions
6
GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction/General safety advice for electrical power tools
Q
Technical information
General safety advice
for electrical power tools
Nom. power input:
Nominal voltage:
Nominal speed:
160W
230V 50Hz
read all the safety advice
WarNING!
~
n0 13.000min-1
and instructions! Failure to observe the safety
advice and instructions may result in electric shock,
fire and/or serious injury.
Nom. oscillation speed: n0 26.000min-1
Backing plate:
Protection class:
360° rotatable
II/
KEEP ALL THE SAFETY ADVICE AND INSTRUC-
TIONS IN A SAFE PLACE FOR FUTURE REFER-
ENCE! THE TERM “ELECTRICAL TOOL” USED
IN THE SAFETY ADVICE REFERS TO ELECTRICAL
TOOLS POWERED BY MAINS ELECTRICITY (BY
Noise and vibration data:
Values determined in accordance with EN 60745
The sound pressure level (A-weighted) of the
device is typically 76dB(A). Uncertainty K = 3dB.
The sound level while working can exceed 90dB(A). MEANS OF A MAINS LEAD) AND ELECTRICAL
TOOLS POWERED BY RECHARGEABLE BATTER-
IES (WITHOUT A MAINS LEAD).
Wear ear protection!
1. Workplace safety
Evaluated acceleration, typical:
Hand/arm vibration ah = 2,309m/s2
Uncertainty K = 1,5m/s2
a) Keep your working area clean and
well lit. Untidy or poorly lit working areas
can lead to accidents.
WarNING!
The vibration level given in
b)
Do not work with the device
in potentially explosive envi-
ronments in which there are
inflammable liquids, gases or dusts.
Electrical power tools create sparks, which can
ignite dusts or fumes.
these instructions has been measured in accordance
with a standardised measurement procedure specified
in EN 60745 and can be used to compare devices.
Different uses of the device give rise to different
vibration levels and in many cases they may exceed
the values given in these instructions. It is easy to
underestimate the vibration load if the electrical pow-
er tool is used regularly in particular circumstances.
c)
Keep children and other peo-
ple away while you are op-
erating the electrical tool.
Distractions can cause you to lose control of
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
the device.
2. Electrical safety
To avoid danger to
life from electric shock:
a) The mains plug on the device must match
the mains socket. The plug must not
be modified in any way. Do not use
an adapter plug with devices fitted
with a protective earth. Unmodified
plugs and matching sockets reduce the risk of
electric shock.
GB/IE/CY
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety advice for electrical power tools
b) avoid touching earthed surfaces such
as pipes, radiators, ovens and refrig-
erators with any part of your body.
There is an increased risk of electric shock if
c) avoid unintentional operation of the
device. Check that the electrical power
tool is switched off before you connect
it to the mains, pick it up or carry it.
Accidents can happen if you carry the device
with your finger on the ON/OFF switch or with
the device switched on.
your body is earthed
.
c)
Keep the device away from
rain or moisture. Water entering
an electrical device increases the
d) remove any setting tools or spanners
before you switch the device on. A tool
or spanner left attached to a rotating part of a
device can lead to injury.
risk of electric shock.
d)
Do not use the mains lead for
any purpose for which it was
not intended, e.g. to carry the
e) avoid placing your body in an unnat-
ural position. Keep proper footing
and balance at all times. By doing this
you will be in a better position to control the
device in unforeseen circumstances.
f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
device, to hang up the device or to pull
the mains plug out of the mains socket.
Keep the mains lead away from heat,
oil, sharp edges or moving parts of the
device. Damaged or tangled mains leads
increase the risk of electric shock.
e) When working outdoors with an elec-
trical power tool always use extension
cables that are also approved for use
outdoors. The use of an extension cable suitable g) If vacuum dust extraction and collection
for outdoor use reduces the risk of electric shock.
f) Use a residual current device (rCD)
for protection if operating the electrical
power tool in a moist environment is
unavoidable. The use of an RCD reduces
the risk of electric shock.
devices are fitted do not forget to check
that they are properly connected and
correctly used. The use of these devices re-
duces the hazard presented by dust.
4. Careful handling and use of
electrical power tools
3. Personal safety
a) Do not overload the device. always
use an electrical power tool that is
intended for the task you are under-
taking. By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
a) remain alert at all times, watch what
you are doing and always proceed
with caution. Do not use the device if
you are tired or under the influence
of drugs, alcohol or medication. One
moment of carelessness when using the device
can lead to serious injury.
b)
Wear personal protective
equipment and always wear
safety glasses. The wearing of
c) Pull the mains plug out of the socket
before you make any adjustments to
the device, change accessories or when
the device is put away. This precaution is
intended to prevent you from unintentionally
starting the device.
personal protective equipment such as dust
masks, non-slip safety shoes, safety helmets or
ear protectors, appropriate to the type of elec-
trical power tool used and work undertaken,
reduces the risk of injury.
8
GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety advice for electrical power tools/Preparing for use
WarNING!
NoxIoUS FUMES!
d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone
use the device if he or she is not famil-
iar with it or has not read the instruc-
tions and advice. Electrical power tools are
dangerous when they are used by inexperienced
people.
e) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use the
device. Many accidents have their origins in
poorly maintained electrical power tools.
f) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice,
and the stipulations drawn up for this
particular type of device. In doing
this, take into account the working
conditions and the task in hand. The
use of electrical power tools for purposes other
than those intended can lead to dangerous
situations.
J
Any harmful/noxious dusts generated from
sanding represent a risk to the health of the
person operating the device and to anyone
near the work area.
WarNING!
J
DUST Haz-
arD! When sanding wood and in
particular when working on materials
that give rise to dusts that are hazardous to
health, the sander must be connected to a suit-
able external dust extraction device.
Wear protective glasses and a dust
mask!
Ensure that there is adequate ventilation when
working on plastic, paint, varnish etc.
Do not soak the materials or the surface you
are about to work on with liquids containing
solvents.
Do not abrade moistened materials or damp
surfaces.
Avoid sanding paints containing lead or other
substances hazardous to health.
Do not work on materials containing asbestos.
Asbestos is a known carcinogen.
Avoid contact with the moving sanding sheet.
Operate the device only with an attached
sanding sheet.
J
J
J
J
J
J
J
J
Never use the device for a purpose for which it
was not intended nor with non-original parts/
accessories. The use of tools or accessories
other than those recommended in the operating
instructions could lead to you suffering an injury.
Switch the device off and allow it to come to a
standstill before you put it down.
Safety advice relating
specifically to this device
J
J
Securely support the workpiece. Use clamps or
a vice to grip the workpiece firmly. This is much
safer than holding it in your hand.
Never support yourself by placing your hands
near or in front of the device or the workpiece
surface. A slip can result in injury.
J
J
Always keep the device clean, dry and free of
oil or grease.
Q
J
J
J
If a dangerous situation arises, pull the mains
plug immediately out of the mains socket.
Always work with the mains lead leading
away from the rear of the device.
Preparing for use
Take note of the mains voltage. The mains voltage
at the mains socket must match that shown on the
rating plate on the device. Devices marked with
230V can also be operated at 220V.
CaUTIoN! Make sure that the device is
switched off before you connect it to the mains
supply.
DaNGEr oF FIrE FroM FLyING
SParKS! Abrading metal creates
flying sparks. For this reason, always
make sure that nobody is placed in any danger
and that there are no inflammable materials
near the working area.
GB/IE/CY
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for use
Note! Always switch on the delta sander before
bringing it into contact with the workpiece material.
removal:
5
j
Press the release button
box for internal vacuum extraction
of the dust extraction
4
and
Switching on the device:
withdraw it towards the rear of the device.
8
j
Move the ON/OFF switch
into the “ON” position.
downwards
Q
reducer piece
Switching off the device:
8
j
Move the ON/OFF switch
the “OFF” position.
upwards into
Connection:
j
Push the reducer piece
into the adapter
3
port
.
2
j
Push the hose of a suitable dust extraction de-
vice approved for that purpose (e.g. a workshop
Q
Vacuum dust extraction
vacuum cleaner) on to the reducer piece
.
3
WarNING!
DaNGEr oF FIrE! There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the
vacuum‘s dust bag) may ignite, e.g. as a result of
flying sparks generated when abrading metals or
metal objects left in wood. This can happen partic-
ularly if the wood dust is mixed with paint residue
or other chemicals and the abraded particles are
hot from prolonged abrasion. Therefore you must
empty the device’s dust collection box and the
vacuum cleaner’s dust bag before taking a break
or stopping work and always avoid overheating of
the abraded particles and the device.
removal:
j
Pull the dust extraction device hose off the
reducer piece
.
3
j
Pull off the reducer piece
.
3
Q
attaching/detaching
sanding sheets
WarNING! Always pull the mains plug is out
of the socket before doing any work on the device.
attaching:
j
Sanding sheets are attached to the backing plate
7
by means of the hook and pile fastening.
Wear a dust mask!
Detaching:
j
Simply pull the sanding sheet off the backing
plate (see Fig. C).
7
WarNING!
Always pull the mains plug is
out of the socket before doing any work on the
device.
Q
rotating the backing plate
WarNING!
Always pull the mains plug is out
Q
Dust box for internal
vacuum extraction
of the socket before doing any work on the device.
7
j
Rotate the backing plate
position (see Fig. D).
into the desired
Connection:
j
Push the dust box for internal vacuum extraction
Sanding and surfaces:
4
on to the hand-held sander until it engages.
The sanding output and the quality of the surface
finish are determined by the grade of grit on the
sanding sheet.
10 GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for use/Maintenance and cleaning/Disposal/Information
j
Always use sanding sheets with grades that
are suitable for the particular surface you are
sanding.
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive 2002/96/EC
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn
out electrical power tools must be collected separately
and taken for environmentally compatible recycling.
Q
advice on use
j
Switch the device on before placing it against
the workpiece.
j
j
j
j
Apply light sanding pressure only.
Advance the device at an even rate.
Change sanding sheets at the appropriate time. more details of how to dispose of your worn out
Do not work on different types of material using
the same sanding sheet (e.g. wood and then
metal). To achieve the best sanding results you
should use unworn, undamaged sanding sheets.
Clean the sanding sheet from time to time with
a vacuum cleaner.
Contact your local refuse disposal authority for
electrical devices.
Q
Information
j
j
Q
Service centre
Sand difficult to reach places with the front or
7
WarNING!
Have your device
side corners of the backing plate
.
J
j
j
Work in parallel and overlapping widths.
After sanding the workpiece, lift the device
from the workpiece before switching it off.
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
WarNING!
J
If the plug or mains
Q
Maintenance and cleaning
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
WarNING!
Always pull the mains plug is out
of the socket before doing any work on the device.
The delta sander is maintenance-free.
j
Clean the device frequently. This should be done
immediately after you have finished using it.
For cleaning the housing use a dry cloth only.
Remove any adhering sanding dust with a
narrow paint brush.
Never any kind of sharp object or petrol,
solvents or cleaning agents that might attack
plastic. Do not allow any liquids to enter the
inside of the device.
Q
Warranty
j
j
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. your goods can
be transmitted free of cost only in this
manner. This warranty applies only to the
initial purchaser and is non-transferable.
j
6
j
Always keep the ventilation slots
clear.
Q
Disposal
The packaging is wholly composed of
The warranty covers only material or manufactur-
environmentally-friendly materials that can ing faults, not normal wear or damage to fragile
be disposed of at a local recycling centre. parts such as switches or rechargeable batteries.
GB/IE/CY 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Q
The appliance is intended solely for private, not
commercial, use.
Declaration of Conformity/
Manufacturer
If this product has been subjected to improper or
inappropriate handling, abuse, or interventions not
carried out by one of our authorised sales and
service outlets, the warranty will be considered void.
This warranty does not affect your statutory rights.
We, Kompernaß GmbH, Burgstr. 21,
D-44867 Bochum, Germany, declare that this
product complies with the following EC directives:
Machinery Directive
(98/37/EC)
GB
EC Low Voltage Directive
(2006/95/EC)
DES Ltd
Units 14-15
Bilston Industrial Estate
oxford Street
Bilston (Great Britain)
WV14 7EG
Electromagnetic Compatibility
(2004/108/EC)
applicable harmonized standards
EN60745-1:2003+A1, EN60745-2-4:2003,
EN55014-1:2000+A1+A2, EN55014-2:1997+A1,
EN61000-3-2:2000+A2, EN61000-3-3:1995+A1,
EN50366:2003
Tel.:
Fax:
0870/787-6177
0870/787-6168
e-mail: [email protected]
IE
and confirm this with the CE symbol.
Kompernaß Service Ireland
Tel.:
1850 930 412 (0,082 €/Min.)
* Standard call rates apply.
Mobile operators may vary.
Type/Machine designation:
Hand-Held Sander
e-mail: [email protected]
Bochum, 31.03.2009
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications
in the course of product development.
12 GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
IAN: 26047
KompernaSS GmbH
Burgstraße 21
D-44867 Bochum
© by orFGen marketing
Last Information Update: 03/2009 · Ident.-No.: XQ2SE032009-6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|