Installation
Powerline 500
Model XAVB5622
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Powerline networking solutions give you an alternative to Ethernet-only
or wireless networks by extending your signal using the electrical wiring.
Plug two or more compatible Powerline 500 devices into electrical outlets
to create or extend your wired home network. In addition to Powerline
500 devices, you can add Homeplug AV certified adapters, for a total of up
to 16 devices. For a complete list of Homeplug AV certified devices, go to
You can use the Pick A Plug feature to choose the best combination of
outlets.
You can use the Security button on each Powerline device to secure the
links between the Powerline devices.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Your Adapter
Before you install your adapter, familiarize yourself with its LEDs,
buttons, and port.
Extra outlet
Power LED
Ethernet LED
Pick A Plug LED
Security button
Factory Reset button
Ethernet ports.
One adapter has two ports,
the other one.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Outlet
Power LED
For information on outlet ratings and safety information, see
Solid green. The electrical power is on.
Blinking amber. The adapter is in power saving mode.
Blinking green. The adapter is in the process of setting up
security.
Off. The adapter is not receiving electrical power.
Ethernet LED
Solid. The Ethernet port is linked.
Off. No Ethernet connection is detected.
Pick A Plug LED
The Pick A Plug feature lets you pick the electrical outlet with
the strongest link rate, indicated by the color displayed by the
LED:
Solid. The adapter is connected to a Powerline network.
•
•
•
Green. Link rate > 80 Mbps (best)
Amber. Link rate > 50 and < 80 Mbps (better)
Red. Link rate < 50 Mbps (good)
Off. The adapter has not found any other compatible
Powerline devices using the same encryption key.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Factory Reset
button
Press the Factory Reset button for one second, then release
it to return the Powerline adapter to its factory default
settings.
Ethernet port
Connect your computers, networking equipment, and other
equipment that uses an Ethernet cable, to your Powerline
network.
Security button Use the Security button to create a secure Powerline
network.
Warning: Do not press the Security button on the Powerline adapter until
installation is complete and the adapters are communicating with each other
(indicated by the blinking Pick A Plug LED). Pressing this button too soon can
temporarily disable Powerline communication. If this occurs, use the Factory
Reset button to return the Powerline adapter to its factory default settings.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Your Adapters
Room 1
Room 2
Note: Do not plug the Powerline
adapter into an extension cord.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure Your Network
¾ To create a secure network:
1. Plug in your new adapters.
2. Wait until the Pick A Plug LEDs are blinking.
3. Press the Security button for two seconds, then press the Security
button on one of the other adapters in your existing network for two
seconds. Both buttons must be pressed within two minutes.
Warning: Do not press the Security button on the Powerline adapter until
installation is complete and the adapters are communicating with each
other (indicated by the blinking Pick A Plug LED). Pressing this button too
soon can temporarily disable Powerline communication. If this occurs, use
the Factory Reset button to return the Powerline adapter to its factory
default settings.
Note: If, aſter creating a secure Powerline network, you want to add
another adapter, perform a factory reset on all of the adapters and then
perform this procedure.
Note: The Security button does not work in power saving mode (see
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Add Adapters
To add adapters before you have configured the security feature, just plug
them in and connect the adapters to your equipment.
¾ To add adapters to a Powerline network with security set:
1. Plug in and connect the new adapters.
2. On all of the previously installed adapters, press and hold the Factory
Reset button for one second.
This returns them to the factory settings.
3. Secure the Powerline network:
a. On any of the adapters, press and hold the Security button
for two seconds.
b. On any one of the other adapters, press and hold the
Security button for two seconds.
Both buttons must be pressed within two minutes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Tips
Power LED is off.
Make sure that power is supplied to the electrical
outlet, and that the Powerline devices are not plugged
into an extension cord, power strip, or surge protector.
Power LED is blinking
amber.
Power saving mode occurs when the Ethernet LED is
off. This can occur in the following circumstances:
•
•
The Ethernet cable is unplugged.
The device connected through the Ethernet cable
is turned off.
•
•
The adapter is idle for 10 minutes.
It returns to normal mode within two seconds
aſter the Ethernet link is up.
Pick A Plug LED is off.
If you have set network security, make sure
that all Power line devices are using the same
encryption key; see the online user manual for
details.
•
Press the Factory Reset button on each device
for one second to return the Powerline adapter to
its factory default settings.
Pick A Plug LED is
amber or red.
Move the Powerline device closer to the other
Powerline devices.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Ethernet LED is off.
•
•
Make sure that the Ethernet cables are working
and securely plugged into the devices.
Press the Factory Reset button on each device
for one second to return the Powerline adapter to
its factory default settings.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
•
For national approvals (approval schemes other than CB), relevant
national standards for plug, socket-outlet, and direct plug-in units (for
example, US) shall also be consulted while testing and approving such
products according to national standards.
•
•
•
AC input rating (NA): 100–125V, 0.2A (max.); 50–60 Hz excluding
socket-outlet rating.
AC input rating (AU, UK, FR, EU): 200–250V, 0.2A (max.), 50–60 Hz
excluding socket-outlet rating.
XAV5622 ratings (maximum load):
•
•
•
EU: 16A, 250V
UK: 13A, 250V; FR: 16A, 250V; NA: 15A, 125V
AU: 10A, 250V
•
•
Operating temperature: 0–40°C.
Check the electrical current for any device plugged into the filtered AC
socket. Do not exceed home and product outlet ratings and electrical
requirements.
•
•
The socket-outlet shall be installed near the equipment and be easily
accessible.
Only power cords are allowed to be inserted into the filtered AC
12
Download from Www.Somanuals.com. All Manuals Search And Download.
outlet; no other equipment with a direct plug-in is allowed. Power
cord must be a maximum of 1 m long and a minimum of 0.75 mm
square of cross-sectional area.
•
Do not plug devices that exceed the product ratings into the
XAV5622 filtered AC outlet. The output voltage of the filtered AC
outlet is the same as the power outlet that the XAV5622 is plugged
into. To help avoid damaging your system, be sure that the attached
devices are electrically rated to operate with the power available in
your location.
•
•
If the input AC voltage is less than 100 VAC, the device plugged into
the filtered AC socket of the XAV5622 might not perform as well as
expected.
DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket
or into an attached power strip. The device is not intended to be used
with home appliances such as air conditioners, power tools, space
heaters, fans, hair dryers, ovens, or refrigerators.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
Thank you for purchasing this NETGEAR product. Aſter installing your device, locate
the serial number on the label of your product and use it to register your product at
https://my.netgear.com. You must register your product before you can use NETGEAR
telephone support. NETGEAR recommends registering your product through the
NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support resources. You
in the product’s user interface.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other
countries. Information is subject to change without notice. © NETGEAR, Inc. All rights
reserved.
Compliance
For the current EU Declaration of Conformity, visit
For regulatory compliance information, visit
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
201-18270-03
August 2014
Download from Www.Somanuals.com. All Manuals Search And Download.
|