Vacuum Cleaner
(Domestic use)
Model No. MC-CG712
MC-CG710
Operating Instructions
Contents
IMPORTANT SAFETY INSTRUCTIONS
FOR THE USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Your Vacuum Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Vacuum Cleaner Consumables / Accessories . . . . . . . 8
Thank you for purchasing the vacuum cleaner.
Please read these instructions carefully before using the
appliance and save these instructions for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
1
2012/01/11
10:24:13
Model: MC-CG712
Your Vacuum Cleaner
Telescopic wand
Release button
Suction regulator
The length can be
adjusted.
Curved wand
Use this function when
strong suction causes the
nozzle to stick to the floor,
hindering movement.
OFF/ON
Floor nozzle
The floor nozzle can be
adjusted to suit the floor.
switch pedal
Plug
* Plug might be
different from
the illustration.
MC-CG710
Variable
power control
Hose
Parquet /
Carpet
Bare floor
Dust cover
Dust bag (in body)
Dust indicator
Mains lead
To check whether the dust bag is full, turn the power
control to the highest setting and lift the nozzle off the
floor. If the dust indicator turns red, the dust bag is full.
Alternative nozzles
Parquet nozzle
Detachable dusting brush
(MC-CG712 only)
(MC-CG712 only)
The detachable dusting brush can be set
between the telescopic wand and floor
nozzle. You can remove the floor nozzle
easily anytime by pressing the release pedal
to use it.
Crevice nozzle
For narrow gaps,
etc.
Upholstery nozzle
For cushions,
covers, etc.
Dusting brush
For furniture,
venetian blinds, etc.
(MC-CG712 only)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
5
2012/01/11
10:24:16
Using the Appliance
Operating the appliance
Parking and storing
Park position
1 Assemble the curved wand, telescopic
wand, and floor nozzle together.
- MC-CG712
Connect the curved wand and the
floor nozzle to the telescopic wand by
aligning the tab with the hole.
Curved
wand
Telescopic
wand
Floor
nozzle
Storage position
- MC-CG710
Connect the upper end of the telescopic
wand to the curved wand by aligning
the tab with the hole.
Connect the other end of the telescopic
wand to the floor nozzle by inserting
and twisting one another.
Curved
wand
Telescopic
wand
Floor
nozzle
Perform the following before storing.
1 Turn off the appliance, and then
remove the plug from the socket
outlet.
To disassemble them, press the release
button/pedal and pull them off from each
other.
2 Press the cord rewind pedal to rewind
the mains lead.
2 Pull out the mains lead and insert the
plug into the socket outlet.
Hold the plug to ensure the mains lead
does not jump.
3 Press the OFF/ON
switch pedal to turn
on the appliance.
Press on the mark
not the edge of the
OFF/ON switch pedal.
Cord rewind pedal
4 Adjust power by
sliding the variable
power control.
Press on the mark, not the edge of the
cord rewind pedal.
3 Store the supplied nozzles.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
6
2012/01/11
10:24:18
Replacing the dust bag
Replace the dust bag with the new one in
the following cases:
- When the dust bag is full
For more details on the dust indicator,
see page 3.
- When suction power has dropped
1 Open the dust cover, and then pull out
the dust bag.
Dust
cover
Dust bag
2 Place a new dust bag, and then close
the dust cover.
If the dust bag is not properly installed,
the dust cover cannot be closed.
If suction power does not return, check
for blockages in hose, telescopic wand,
nozzles, and pre-motor filter.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
7
2012/01/11
10:24:19
Maintenance
Replacing the exhaust filter
Replace the exhaust filter once a year.
CAUTION
Pull out the exhaust filter cover from the
rear side and replace the filter with a new
one.
- Remove the plug from the socket
outlet before cleaning or maintaining
the appliance.
Put the filter cover back to the main
body.
- Do not use detergent or any other
cleaning liquids.
Cleaning the outside of the
appliance
Clean the outside of the appliance with a
soft cloth.
Replacing the pre-motor filter
Cleaning the floor nozzle
1 Remove the dust bag (see page 5).
2 Remove the pre-motor filter with its
Use an old toothbrush or similar tool to
clean any dirt or lint from the brush.
cover from the main body.
MC-CG712
MC-CG710
3 Remove the pre-motor filter from its
cover and insert a new one.
Pre-motor filter
4 Replace all parts to their original
positions.
If the dust bag is not properly installed,
the dust cover cannot be closed.
CAUTION
Attach the pre-motor filter correctly to
avoid damaging motor.
CAUTION
Do not wash the floor nozzle with
water.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
8
2012/01/11
10:24:21
Trouble Shooting
Please check the following first if you have any problems.
Problem
Solution
The appliance does
not switch on.
- Check if the plug is connected firmly and the socket outlet is
working normally.
- If a thermal cut-out device has activated, wait approximately 60
minutes until it has reset.
The mains lead does - Rewind and pull out the mains lead repeatedly while pressing
not come out. the cord rewind pedal without using excessive power.
The mains lead does - Pull the mains lead out 2 m to 3 m and then press the cord
not fully rewind.
rewind pedal to rewind the mains lead while holding the plug.
Suction power has
decreased.
- Check if the dust bag is full (see page 3).
-
Check for blockages in hose, telescopic wand, nozzles, and pre-
motor filter. Then clean those parts as necessary (see page ).
4
If the problem cannot be solved, please contact your local customer service centre. The
contacts can be found in “GUARANTEE”, the separate paper which has been attached with
the appliance.
Specifications
Specifications
Power source
MC-CG712
MC-CG710
230 - 240 V, 50Hz
Max. input
1400 W
1300 W
Nominal input
1100 - 1200 W
1050 - 1150 W
Dimensions (W x L x H)
Net weight
320 mm x 500 mm x 265 mm
5.5 kg
Telescopic
√
Extension wands
Floor nozzle
Parquet nozzle
Crevice nozzle
Upholstery nozzle
Dusting brush
√
–
√
√
√
√
–
–
Detachable dusting brush
* Class with respect to protection against electric shock:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
9
2012/01/11
10:24:22
Vacuum Cleaner Consumables / Accessories
DESCRIPTION
MC-CG712
MC-CG710
Hose unit
1 PC
1 PC
1 PC
Curved wand set
Connection wand
1 PC
-
-
Telescopic wand
1 PC
1 PC
-
Floor nozzle
-
1 PC
-
Parquet nozzle
Crevice nozzle
1 PC
1 PC
1 PC
Upholstery
nozzle unit
Dusting brush unit
1 PC
1 PC
-
-
Detachable
dusting brush
Exhaust filter
(HEPA filter)
1 PC
1 PC
1 PC
Pre-motor filter
Dust bag
TYPE C-17H
* Specifications are subject to change without notice.
Panasonic Manufacturing Malaysia Berhad (6100-K)
No.3, Jalan Sesiku 15/2, Section 15, Shah Alam Industrial Site,
40200 Shah Alam, Selangor Darul Ehsan, Malaysia.
V01ZCH00G
© Panasonic Corporation 2012
Printed in Malaysia
A0912
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CG710_EN_UK.indd
10
2012/01/11
10:24:23
|