OWNER'S MANUAL
68CM CORDLESS REMOTE LCD TV/MONITOR
MODEL: TFTV681U
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents (continued)
Setting Sound ............................................................................................................................................
Customising the Sound .......................................................................................................................
Using the Preset Sound Mode ............................................................................................................
Adjusting On-Screen Display ....................................................................................................................
Adjusting OSD Position ......................................................................................................................
Adjusting OSD Transparency .............................................................................................................
Setting OSD Timeout ..........................................................................................................................
PIP Operations ..........................................................................................................................................
Viewing and Changing The Position of the PIP Frame ......................................................................
Selecting the Signal Source for the PIP Frame ..................................................................................
Selecting Sound Source for PIP Frame ..............................................................................................
Adjustment in VGA Mode ..........................................................................................................................
Adjusting Picture .................................................................................................................................
Adjusting Image Size ..........................................................................................................................
Changing the Position of Image .........................................................................................................
Adjusting the CLOCK and PHASE .....................................................................................................
Adjusting the Picture Automatically ....................................................................................................
Troubleshooting .........................................................................................................................................
Specifications ............................................................................................................................................
26
26
26
27
27
27
27
28
28
28
28
29
29
29
30
30
30
31
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
WARNING: TO REDUCE THE RISK OF OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of insinuated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of ,important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40
of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
(America only)
This product utilises tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental considerations. For disposal or recycling information, please contact
FCC STATEMENT (America only)
FCC Notice
LCD TV: A CLASS B digital device
This equipment has been tested and found to comply with the limits for a Class digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not
expressly approved by the manufacturer could cause harmful interference and would void the user's
authority to operate this device.
WARNING: This is a CLASS B product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures to counter interference.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe
the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service
life of your PDP TV product, please read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.
3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Do not use this apparatus near water---for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near swimming
pool, and the like.
Do not use immediately after moving from a low temperature to high
temperature environment, as this causes condensation, which may result in
fire, electric shock, or other hazards.
6. Clean only with dry cloth---Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
7. Ventilation---Do not block any ventilation openings. Install in accordance
with the manufacturer instructions. The vents and other openings in the cabinet
are designed for ventilation. Do not cover or block these vents and openings
since insufficient ventilation can cause overheating and/or shorten the life of
the product. Do not place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer's
instructions are followed.
8. Heat sources---Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Grounding or Polarisation---Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised
plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet. (America only)
10. Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Attachments---Only use attachments/ accessories specified by the manufacturer. Do not use attachments not
recommended by the manufacturer. Use of improper attachments can result in accidents.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions (continued)
12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. Do not place the product on an unstable
trolley, stand, tripod or table. Placing the product on an unstable base can cause the
product to fall, resulting in serious personal injuries as well as damage to the product.
When mounting the product on a wall, be sure to follow the manufacturer's instructions.
Use only the mounting by the hardware recommended manufacturer.
13. Carefully move---When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven
floor surfaces can cause the product to fall from the trolley.
14. Lightning---Unplug this apparatus during lightning storms or when unused for long
of periods time.
For added protection for this television equipment during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna. This will prevent damage to the equipment due to lightning and
power-line surges.
15. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
16. Replacement parts---In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
shock and/or original parts. Use of unauthorised parts can result in fire, electric other danger.
17. Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
18. Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltage
flows and/or in the product, and inserting an object can cause electric shock short internal parts. For the same reason,
do not spill water or liquid on the product.
19. Damage, requiring service---If any of the following conditions occurs unplug the power cord from the AC outlet, and
repairs. request a qualified service person to perform
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable
abnormality in the product indicates that the product needs servicing.
20. Safety checks---Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
21. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer. This is a safety feature.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions (continued)
22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you
are not sure of the type of power supply to your home, consult your product dealer or local power company. For added
protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line
surges. When the unit has to be used with another power supply voltage, the power cable must be changed. Consult your
product dealer. The socket outlet should be installed near the equipment and easily accessible. Use only the power cord
designated by our dealer to ensure safety and EMC. When connecting other products such as VCRs and personal computers,
you should turn off the power of the unit for protection against electric shock.
23. Panel protection---The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impacted upon by other
objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.
24. Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally,
a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not
affect the performance of your product.
If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical
Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode. (America only)
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC --- NATIONAL ELECTRICAL CODE
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can collide with
such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or circuits, as
contact with them might be fatal.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Using the Remote Control
Use the remote control by pointing it towards the remote sensor window of the set.
Objects between the remote control and sensor window may prevent proper operation.
Note: the illustration is for your reference only, the remote sensor may locate differently
with different model.
Cautions regarding use of remote control
Do not expose the remote control to shock. In addition, do not expose the remote
control to liquids, and do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or
strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer
to the remote sensor window.
Batteries for the Remote Control
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
1Open the battery cover.
Insert two size-AAA batteries.
(Place the batteries with their terminals
corresponding to the (+) and (-)
2
indications in the battery compartment.)
3 Replace the cover.
Precautions on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Place batteries with their terminals corresponding to the (+) and (-) indications.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause
old batteries to leak chemicals.
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash.
If chemical leakage is found, wipe with a cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control is not used for an extended period of time, remove the batteries from the remote control.
Power Connection
Insert the AC socket into a conveniently located AC outlet.
Note:
This product should be operated only from the type of power source indicated on the marking label.
Always unplug the AC cord from power outlet when not using for a long period of time.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations (continued)
Antenna Connection
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the
picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
The exact type and position of the aerial will depend upon your particular area.
75-ohm coaxial cable (round cable)
Note:
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur
due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
The illustration is for your reference only.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Main Unit
Power Indicator
Channel Up/Down
Volume Up/Down
Remote Sensor
Menu
Select Input Signal
Power On/Standby
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
2. SOURCE
To access signal source select menu
In OSD Menu, press this button to confirm your setting or operation
3. MENU
Press this button to access the Menu main page
4. VOL+/-
Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;
In OSD Menu, press these buttons to adjust the value or setting of each item
5. CH+/-
Press these two buttons to directly change the TV channel;
In OSD Menu, press these buttons to choose the OSD items
Note:
Functions of VOL+/-, CH+/-, MENU, SOURCE and POWER
are also provided to the remote control.
This operation manual provides a description based on operating functions with the remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (continued)
Main Unit
ANTENNA INPUT
S-VIDEO
AUDIO R
AV1 INPUT/
S-VIDEO IN
AUDIO L/MONO
VIDEO
AUDIO R
AUDIO L/MONO
VIDEO
AV2 INPUTS
AV OUT
AUDIO R
AUDIO L/MONO
VIDEO
HEADPHONE JACK
HDMI
AUDIO
VGA IN
VGA
Y
Pb/Cb AUDIO-L
COMPONENT IN
Pr/Cr AUDIO-R
1. Antenna Input
Allows you to connect cable or outdoor antenna
2. AV2 Inputs (Video, Audio L/Mono, R) / S-Video input
Receive video/audio signals from external sources such as VCR or DVD player.
Receive a S-Video signal from external source such as VCR or DVD player.
3. AV1 Inputs (Video, Audio L/Mono, R)
Receive a S-Video signal from external source such as VCR or DVD player.
4. AV Outputs (Video, Audio L/Mono, R)
5. Headphone jack
6. HDMI input jack
7. VGA input / Audio in
Connect to the VGA/audio output jacks on your equipment.
8. COMPONENT Inputs (Y, Pb/Cb, Pr/Cr, Audio L, R)
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (continued)
Remote Control
1. POWER
1
Turn the unit on or off
2. S.S.
2
To select sound output from the main frame or the PIP frame
when in PIP mode
11
12
3
4
3. NR (Noise Reduce)
5
13
To enhance the picture quality by reducing the noise (snow)
4. SLEEP
6
To set Sleep timer
5. MUTE
14
7
Sound mute
6. MENU
To access the Menu main page or exit menu operation
8
: To move upward or downward in menu operation;
: To move left or right in menu operation;
9
15
To adjust selected menu item in menu operation;
To confirm your operation or setting or access a submenu
10
16
17
7. S.MODE
Sound mode select
8. 0~9 number buttons
Direct channel select
9. Return
To quickly jump between current channel and last selected
channel
10. VOL+/-: Use to adjust volume;
11. SIZE
To quickly select SIZE MODE.
12. DISPLAY
To display channel status or signal information
13. STILL
To freeze current picture
14. P.MODE
Picture mode select
15. Source
To access source select menu and to select the source
16. CH+/-: Use to switch channels;
17. PIP
To activate PIP function and change the position of the PIP
frame
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Connect a VCR
ANTENNA INPUT
S-video
cable
AV1 INPUT/
S-VIDEO IN
or
Video
cable
AV2 INPUTS
Audio
cable
AV OUT
HEADPHONE
VCR
Yellow (VIDEO)
Rear of the VCR
White (AUDIO L/MONO)
Red (AUDIO R)
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note:
For better video, you can use the S-Video terminal if your source supports it.
The unit chooses the S-Video signal prior to the Video signal.
The Video input terminal on the AV IN(2) and the S-Video input terminal share the
same Audio input terminals.
To play VCR
1. Turn on your LCD TV, press Source
button on the remote control.
2. Press Source button repeatedly to select AV2/SV. Note that the period of
two-press should be within 2 seconds.
3. Turn on your VCR, insert a video tape and press the Play button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Connect a Camcorder
ANTENNA INPUT
AV1 INPUT/
S-VIDEO IN
Audio
cable
Video
cable
AV2 INPUTS
AV OUT
HEADPHONE
Yellow (VIDEO)
White (AUDIO L/MONO)
Red (AUDIO R)
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
To playback Camcorder
1. Turn on your LCD, press Source
button on the remote control.
2. Press Source button repeatedly to select AV1.
3. Turn on your camcorder and set it to output mode. (For details, refer to
your camcorder owner's manual.)
4. Insert the tape into the camcorder and press Play button.
Note:
The operations of the camcorder may be different and is dependent on your
model. Please read the owner's manual of your camcorder to confirm operation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Connect a DVD player
HDMI
AUDIO
VGA IN
Video
cable
VGA
Y
Pb/Cb AUDIO-L
Pr/Cr AUDIO-R
COMPONENT IN
Audio
cable
DVD player
Rear of the DVD player
How to connect a DVD Player using Component Video Connections:
Connect the Video cable between the Y, Pb/Cb, Pr/Cr input jacks on the unit and Y, Pb, Pr ( or Cb, Cr) output
jacks on the DVD player.
Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the DVD player.
To play DVD
1. Turn on your LCD TV, press Source
button on the remote control.
2. Press Source button repeatedly to select YPBPR.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Connect a product to HDMI
HDMI cable
HDMI
AUDIO
VGA IN
VGA
Y
Pb/Cb AUDIO-L
COMPONENT IN
Pr/Cr AUDIO-R
Product with HDMI jack
How to connect:
Connect the HDMI cable between the HDMI input jacks on the unit and HDMI output jacks on the product.
Note:
The HDMI Sources are compatible with DVI displays through the use of a passive cable converter. So you
may connect product with DVI output jack to the unit.
Connect a passive cable converter between the HDMI input jack on the unit and DVI output jack on the product.
Connect an Audio cable between the AUDIO output on your product and AUDIO input jack of VGA IN on the unit.
To Watch your Product
1. Turn on your LCD TV, press Source
button on the remote control.
2. Press Source
button repeatedly to select HDMI.
3. Turn on your Product.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Connect a PC
HDMI
AUDIO
VGA IN
VGA
Y
D-Sub
cable
Pb/Cb AUDIO-L
COMPONENT IN
Audio
cable
Pr/Cr AUDIO-R
How to connect:
Connect a D-Sub cable between the VGA interface on the PC and the VGA input on the unit.
Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
To Watch the PC screen
1. Turn on your LCD TV, press Source
button on the remote control.
2. Press Source button repeatedly to select VGA.
3. Turn on your PC and check for PC system requirements.
4. Adjust the screen resolution and settings on your computer to the
preferred settings.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Connect a VCR for Recording
ANTENNA INPUT
AV1 INPUT/
S-VIDEO IN
AV2 INPUTS
AV OUT
Audio
cable
HEADPHONE
Video
cable
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R)
Rear of the VCR
VCR for recording
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
To record program
1. Turn on your LCD TV, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.
Note:
The AV output terminals output the audio/video signal from the Antenna input or AV inputs.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Unit On and Off
Turning the Unit On and Off
Turning On
Insert the power cord into the wall outlet.
Press the Power
button on the remote control.
The unit will be turned on and you will be ready to use its features.
Turning Off
With the power on, Press the Power button on the remote control to turn off.
Note:
You can also use the Power button on the Control panel on the main unit.
Viewing the Menus and Displays
Your LCD TV has a simple, easy-to-use menu system that appears on the screen. This system makes it convenient and fast
To use features on the unit. The unit also lets you display the status of many of your LCDTV features.
Viewing the Menus
With the power on, press the MENU button on the remote control.
1
The main menu appears on the screen.
Use the
to select menu page. Use to access the submenu.
2
3
Use the
item.
to select menu item. Use
to adjust value of
You can press the MENU button repeatedly to exit the menu
operations.
Note:
To clearly introduce the menu operations, this operation manual provides a
description based on operation with the remote control.
Displaying Status Information
Press the DISPLAY button on the remote control,the unit will display current status information such as
channel number, or signal source, etc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs
Your LCD TV can memorise and store all the available channels. After the available channels are memorised,
use CH+/- to scan the channels.
Auto Search
1
2
3
4
5
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select AUTO SEARCH item.
Press
to store channels in memory automatically.
The unit will begin memorising all the available channels. During the
process of the Auto Search, you can press MENU to exit.
Note: Before AUTO SEARCH, please set the TV's colour system to
AUTO and sound system to your local area's sound system.
Manual Search
1
2
3
4
5
6
7
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select MANUAL SEARCH item.
Press to access the submenu.
Press repeatedly to select SEARCH NEXT item.
Press
to search program from current frequency.
Press , then the unit searches towards the lower frequency.
Press , then the unit searches towards the higher frequency.
8
Press MENU to exit.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs (continued)
Skipping Channels
1
2
3
4
5
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select MANUAL SEARCH item.
Press to access the submenu.
The [CURRENT CHANNEL] will be highlighted automatically.
6
7
8
9
Press
Press to select SKIP item.
Press to select ON or OFF.
to access a channel number that you want to skip.
Press MENU to exit.
When the item is set to ON, the selected channel will be skipped.
When the item is set to OFF, the selected channel will not be skipped.
The skipped channels can not be selected by using the CH+/- buttons unless
you use the number buttons to input channel number directly.
Exchanging Channel
Press MENU to display the menu main page.
1
Press
repeatedly to select SOURCE menu.
2
3
4
5
Press to access the submenu.
Press repeatedly to select MANUAL SEARCH item.
Press to access the submenu.
The [CURRENT CHANNEL] will be highlighted automatically.
6
7
8
9
Press
to select a channel number as your current channel.
Press to select TARGET CHANNEL item.
Press
Press
to select a target channel number that you want to exchange with the current channel.
to select EXCHANGE item.
10 Press to exchange the contents of the current channel and the target channel.
For example, if the current channel number is channel 3, and you select
channel 4 as your target channel, now the contents of channel 3 and channel 4
will be exchanged if you perform the above steps.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs (continued)
Setting AFC Function ON or OFF
1
2
3
4
5
6
7
8
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select MANUAL SEARCH item.
Press to access the submenu.
Press
Press
repeatedly to select AFC item.
to select ON or OFF.
Press MENU to exit.
When the item is set to ON, the unit will automatically tune the program
frequency to provide the best possible picture and sound.
Manual Fine Tuning
Press MENU to display the menu main page.
1
Press
repeatedly to select SOURCE menu.
2
3
4
5
6
7
8
Press to access the submenu.
Press repeatedly to select MANUAL SEARCH item.
Press to access the submenu.
Press to select FINE TUNE item.
Press
to fine tune till the best possible picture and sound are obtained.
Press MENU to exit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the
unit has memorised.
You will not see channels that were erased.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons to input the channel number and the unit automatically
to goes the selected channel.
To select a two-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the
selected channel immediately.
To select a three-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to
the selected channel.
Note:
When you use the number buttons, you can directly select channels that were skipped.
The period of two-press should be within 2 seconds
Using the Return
button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the VOL+ or VOL- to increase or decrease the volume.
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
Press the MUTE button and the sound cuts off.
1
To turn mute off, press the MUTE button again.
2
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations (continued)
Select Input Source Signal
1
2
3
4
5
6
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select PICTURE SOURCE item.
Press
to select.
Press MENU to exit.
TV -------- Select TV signal.
AV1 ------- Select signal from AV IN (1) terminals.
AV2/SV ------- Select signal from AV IN (2) or S-video terminals.
YPBPR ------ Select signal from YPbPr.
VGA ------ Select signal from VGA jack.
HDMI ---- Select signal from HDMI jack.
You can also use the Source
button to select input source signal.
Setting Colour System
1
2
3
4
5
6
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select COLOR SYSTEM item.
Press to select.
Press MENU to exit.
Setting Sound System
1
2
3
4
5
6
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
Press repeatedly to select SOUND SYSTEM item.
Press
to select.
Press MENU to exit.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Picture
Customising the Picture
1
Press MENU to display the menu main page.
The picture menu page will be displayed automatically.
2
3
4
5
Press to access the PICTURE submenu.
Press
Press
to select the item you wish to change.
to adjust the value of the item.
Press MENU to exit.
Note: Tint [TINT] item is for NTSC only.
Using the Preset Picture Mode
1 Press MENU to display the PICTURE menu page.
2 Press
to access the PICTURE submenu.
The [PICTURE MODE] will be highlighted automatically.
Press
to select a desired picture mode.
3
4
Press MENU to exit.
There are three preset picture modes (BRIGHT, SOFT and NATURAL)
and one user-set picture mode (PERSONAL). Each preset mode has its
own picture settings.
BRIGHT: Select for a bright picture.
SOFT: Select for a finely detailed picture.
NATURAL: Select for a normal picture.
Adjusted settings are stored in PERSONAL mode.
You may quickly use the P.MODE button on the remote control to select picture
mode.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Picture (continued)
Adjusting Screen Aspect
Press MENU to display the menu main page.
The picture menu page will be displayed automatically.
1
Press to access the submenu.
2
3
4
Press repeatedly to select SIZE MODE item.
Press
to select a desired aspect ratio.
You can select the image aspect ratio between FULL, ZOOM1, ZOOM2
and NORMAL.
FULL – In this mode the picture is progressively stretched toward each side of the screen.
ZOOM1 – This feature is recommended for viewing "letter-box" movie (picture with a black bar on the top and
bottom). If you watch a 4:3 picture in this mode, the picture will be expanded and some information at the top
and bottom will be lost.
ZOOM2 – In this mode the picture is vertically stretched toward upside of the screen so that when viewing
programs with title at the bottom, the bottom title can be revealed.
NORMAL – In this mode the picture is displayed without modification, in its native aspect ratio.
Note:
You may quickly switch the aspect ratio between FULL, ZOOM1, ZOOM2 and NORMAL by using the SIZE
button on the remote control.
Reducing Picture Noise
1
Press MENU to display the menu main page.
The picture menu page will be displayed automatically.
Press to access the submenu.
2
3
4
Press repeatedly to select NOISE REDUCE item.
Press
to select OFF, WEAK or STRONG.
Sometimes a noisy picture may appear on the screen because of poor signal.
This function helps to enhance the picture quality by reducing the noise.
Note:
You may quickly reduce the picture noise by using NR button on the remote control.
Freezing picture
Press the STILL button to hold on the image on the screen (the video sources still run). Press it again
to reactivate the image.
Note:
For the sake of protecting the screen, please DO NOT freeze a picture for a long time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Timer
Setting Clock Time
Making use of this function can set the current time for the TV.
1
2
3
Press MENU to display the menu main page.
Press repeatedly to select FUNCTION menu.
Press to access the submenu.
The [CLOCK] item will be highlighted automatically.
4
5
Press to access.
Use
to set the hour (00-23) and the minute (00-59), use
to
switch between the hour and minute.
Press MENU to exit.
NOTE:
Before setting the TIME ON and TIME OFF, please set the CLOCK item first.
Setting ON timer
With the ON timer, the TV will automatically turn on at a preset time.
1
Press MENU to display the menu main page.
2
Press
repeatedly to select FUNCTION menu.
3
4
5
Press to access the submenu.
Press repeatedly to select TIME ON item.
Press to access.
Use
to set the hour (00-23) and the minute (00-59), use
to
switch between the hour and minute.
6
Press MENU to exit.
Setting OFF timer
With the OFF timer, the TV will automatically turn off at a preset time.
Press MENU to display the menu main page.
1
Press
repeatedly to select FUNCTION menu.
2
3
4
5
Press to access the submenu.
Press repeatedly to select TIME OFF item.
Press to access.
Use
to set the hour (00-23) and the minute (00-59), use
to
switch between the hour and minute.
6
Press MENU to exit.
NOTE
The time interval between CLOCK and TIME OFF should be above 1 minute. When the last 1 minute comes,
there exit two situations. The one is: the unit will show you after how many seconds the set will be turned off.
During this period if you do not want the unit to be turned off, press any button to exit before the unit turn off.
The other is: the OFF timer will be cancelled automatically under certain conditions such as sound mute,
picture freeze or other OSD items adjustment etc.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Timer (continued)
Setting Sleep Timer
Making use of this function allows you to have the set automatically turn off after a preset time.
1
Press MENU to display the menu main page.
2
Press
repeatedly to select FUNCTION menu.
3
4
5
6
Press to access the submenu.
Press repeatedly to highlight SLEEP TIMER item.
Press
repeatedly to select.
Press MENU to exit.
Note:
You may quickly set the sleep time by using the SLEEP button on the remote control.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Sound
Customising the Sound
Press MENU to display the menu main page.
1
2
3
4
5
Press
repeatedly to select SOUND menu.
Press to access the submenu.
Press repeatedly to select the option items you want to adjust.
Press
to adjust the value.
Using the Preset Sound Mode
1
Press MENU to display the menu main page.
2
Press
repeatedly to select SOUND menu.
3
4
5
Press to access the submenu.
Press repeatedly to select SOUND MODE item.
Press
to select a desired sound mode.
There are three preset sound modes (NORMAL, MUSIC and NEWS) and one
user-set sound mode (PERSONAL). Each preset mode has its own sound settings
(Bass and Treble).
NORMAL: Set the value of Bass and Treble to middle level.
MUSIC: Set the value of Bass and Treble to higher level.
NEWS: Set the value of Bass and Treble to lower level.
Adjusted settings are stored in PERSONAL mode.
You may directly use the S.MODE button to quickly select sound mode.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting On-Screen Displays
Adjusting OSD Position
1
Press MENU to display the menu main page.
2
3
4
5
Press
repeatedly to select OSD menu.
Press to access the submenu.
Press repeatedly to select H-POSITION or V-POSITION item.
Press
to adjust the OSD position.
Adjusting OSD Transparency
Press MENU to display the menu main page.
1
Press
repeatedly to select OSD menu.
2
3
4
5
Press to access the submenu.
Press repeatedly to select TRANSPARENCY item.
Press
to adjust the OSD transparence.
Setting OSD Timeout
This setting allows you to set the time for the main OSD menu to be displayed on screen.
1
Press MENU to display the menu main page.
2
Press
repeatedly to select OSD menu.
3
4
5
Press to access the submenu.
Press repeatedly to select DURATION item.
Press
to adjust the value.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP Operations
Viewing and Changing the Position of the PIP Frame
1
2
3
Press MENU to display the menu main page.
Press repeatedly to select SOURCE menu.
Press to access the submenu.
The [PIP MODE] item will be highlighted automatically.
4
5
Press
repeatedly to select OFF, P1S1, P1S2, P2S1, P2S2, P3S1,
P3S2, P4S1 or P4S2.
Press MENU to exit.
Main frame
NOTE:
You may quickly open or close PIP frame by directly using the PIP button.
You may also change the position of the PIP frame by holding the PIP button.
PIP frame
Selecting the Signal Source fort he PIP Frame
1 With the PIP working, press MENU to display the menu main page.
2 Press
repeatedly to select SOURCE menu.
3 Press
to access the submenu.
4 Press
repeatedly to select SUB PICTURE item.
5 Press
to select signal source for the PIP frame.
The input signal source are divided into two groups. One contains TV, AV1
and AV2/SV, the other contains YPbPr, VGA and HDMI.
If the input signal source selected for the main frame is one kind from one group,
you may only allows to select a kind of input signal source for PIP frame from the
other group.
Selecting Sound Source for PIP Frame
1
With the PIP working, press MENU to display the menu main page.
2
Press
repeatedly to SOUND select menu.
3
Press to access the submenu.
The [SOUND SOURCE] item will be highlighted automatically.
4
5
Press
to select between MAIN or SUB.
Press MENU to exit.
NOTE:
If you select MAIN, the main frame sound will be output;
If you select SUB, the pip frame will be highlighted with a blue border and the sound will be output.
You may directly use the S.S button for selection.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment in VGA Mode
Adjusting the Picture
1
Press MENU to display the menu main page.
The [PICTURE] menu will be highlighted automatically.
2
3
4
5
Press to access the submenu.
Press
Press
repeatedly to select the item you wish to change.
to adjust the value of the item.
Press MENU to exit.
Adjusting Image Size
Press MENU to display the menu main page.
1
Press
repeatedly to select SCREEN menu.
2
3
Press to access the submenu.
The [SIZE MODE] item will be highlighted automatically.
Press
to FULL or ASPECT.
4
5
Press MENU to exit.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting in VGA Mode (continued)
Changing the Position of Image
1
2
3
4
5
6
Press MENU to display the menu main page.
Press repeatedly to select SCREEN menu.
Press to access the submenu.
Press repeatedly to select H-POSITION or V-POSITION item.
Press
to adjust the value of the item until the screen is well-aligned.
Press MENU to exit.
Adjusting the CLOCK and PHASE
1
2
3
4
5
6
Press MENU to display the menu main page.
Press repeatedly to select SCREEN menu.
Press to access the submenu.
Press repeatedly to select CLOCK or PHASE item.
Press
to adjust the value of the item.
Press MENU to exit.
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience blurring,
you can obtain a clearer image by adjusting the phase item.
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is apparent in
the image, try adjusting the clock frequency item.
Adjusting the Picture Automatically
If you are not satisfied with the picture, you may adjust the picture by using this function.
Press MENU to display the menu main page.
1
Press
repeatedly to select SCREEN menu.
2
3
4
5
Press to access the submenu.
Press repeatedly to select AUTO ADJUST item.
Press to start adjusting.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling for repair service, check the following items for possible remedies to an
encountered symptom.
Symptoms
Check item
"Ghost" or double images
This may be caused by obstruction to the antenna due to high rise buildings
or hills. Using a highly directional antenna may improve the picture.
No power
No picture
Check that the AC power cord is plugged into the mains socket.
Unplug the power cord, wait for 60 seconds. Then reinsert plug into
the mains socket and turn on the unit again.
Check antenna connections at the rear of the unit to see if it is properly
connected to the unit.
Possible broadcast station trouble. Try another channel.
Adjust the contrast and brightness settings.
Select a correct input.
Is a non-compatible signal being input?
Increase the VOLUME.
Check that the unit is not muted.
Good picture but no sound
Good sound but poor colour
Poor picture
Adjust the contrast, colour and brightness settings.
Sometimes, poor picture quality occurs when having activated an S-VHS
camera or camcorder connected and having connected another peripheral
at the same time. In this case, switch off one of the other peripherals.
Check whether the room is too bright.
This may be caused by electrical interference (e.g. hair dryer, nearby
neon lights, etc.)
Horizontal dotted line
Turn off the equipment.
Check whether the batteries are working. Replace if necessary.
Clean the remote control sensor lens on the unit.
Do not use the remote control under strong or fluorescent lighting.
The batteries should be inserted with polarity (+, -) aligned.
Television not responding to
remote control
Snowy picture and noise
Check the aerial connection.
No stable or not
synchronised VGA picture
Check if you have selected the correct VGA mode in your PC.
No output from one of the speakers
Controls buttons do not work
Adjust Balance in the SOUND menu.
Unplug the power cord, wait for some seconds. Then re-plug the power
cord and turn on the unit again.
Do not use in hot and cold rooms (location)
When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is no
a malfunction, and the unit will recover when the temperature returns to normal.
t
Do not leave the unit in a hot or cold location. Also, do not leaves the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: 00C to +500C; Working temperature: 50C to +400C.)
Note:
If your problem is not solved, restart your TV by turning it off and then on again once.
Never attempt to repair a defective TV yourself.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-L27U63-00
V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|