OWNER'S MANUAL
34CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 3499G
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4163
Standards Australia
APP No: N15957
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Hyperband
TV System: PAL B/G, NTSC Playback
255 preset channels
Automatic channel preset
Full function remote control
English/French/Spanish/Indonesian on-screen display
AV input & S-VIDEO input terminals
Clock/Game/Calendar
Digital AFT technology
Four picture modes
ON timer/OFF timer
Green Power
Hotel lock
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Cautions
Safety Cautions
When any unusual situation occurs, turn off the
power supply at once and remove the plug from the
wall outlet. Contact a qualified service department in
your local area.
1
2
Do not expose the TV set to rain or excessive
moisture. Avoid using the set in very warm or
damp places and never use it in a bathroom.
3
When cleaning dust off the picture tube disconnect
the power first. You can wipe lightly with a piece of
dry, clean and soft cloth.
4
Avoid exposing the set to direct sunlight and other
sources of heat to prevent damage to the cabinet
and components.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
!
This TV set can operate on an AC power of 240V, 50HZ. You must not use a
power supply of any other type.
5
High voltage exists in this TV set. Do not remove the
cover
6
Do not cover the ventilating hole in the cabinet
Keep a space of more than 5cm from the walls to the
TV set to ensure adequate ventilation.
7
If the power cord or the plug is damaged contact a
qualified service department for service.
8
When the TV set is to be left unattended for a long
period of time, turn off the power supply and remove
the plug from the wall outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Front
INDICATOR
REMOTE SENSOR
POWER SWITCH
6
5
4
1
2
3
1. AV/TV button: Video input select.
2. MENU button: To enter into menu operation.
3. VOL- button: volume down adjust; menu item adjust
4. VOL+ button: volume up adjust; menu item adjust.
5. CH- button: channel down select; menu item select.
6. CH+ button: channel up select; menu item select.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
4
3
1
2
1. Antenna input
2. S-VIDEO input
3. AV input (VIDEO, AUDIO L/MONO, R)
4. AV output (VIDEO, AUDIO L/MONO, R)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
(continued)
Remote Controller
Power on/standby
Direct channel selector
Previous channel
Digit select
Picture mode select
Playing game
Break
Calendar
Undo operation in game
Help in menu operations
Channel up
Volume down
Volume up
Channel down
Sleep timer
TV/VIDEO input select
On-Screen call
Sound mute
Menu control
!
Notes:
In most cases, the function CH+/- buttons are equal to the
buttons, and the function of VOL+/- buttons
are equal to the buttons.
/
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective range of the Remote
Installing batteries
1
Open the battery cover.
2
Install two "AAA" batteries
matching the +/- polarities
of the battery to the +/-
marks inside the battery
compartment.
3
! Notes:
Replace the battery cover.
When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
When direct sunlight, and incandescent lamp,
fluorescent lamp or any other strong light shines on
the REMOTE SENSOR of the TV the remote
operation may be unstable.
!
Notes:
The battery life should be about one year under
normal use. Do not try to recharge batteries not
intended to be recharged.
Use only the size and type of batteries
specified. Do not mix different types of batteries
together or old batteries with fresh ones.
When the remote control will not be used for
a long period of time or when the batteries are
worn out, remove the batteries.
Do not throw the batteries into a fire. Dispose of
used batteries in the specified manner.
Do not drop, dampen or disassemble the
remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL the unit in a room where direct light will not fall upon the screen.
Total darkness or a reflection on the picture screen may cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Installation
Antenna installation
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial
must be used. The exact type and position of the aerial will depend upon your particular area.
Notes:
!
It is recommended that the 75-ohm coaxial cable be used to eliminate interference
and noise which may occur due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to video and audio equipment
This TV set provides AV input terminals for your convenient connection to VTR, DVD
or video camera to enjoy the high quality picture.
Please refer to the owner's manual of the equipment to be connected as well.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
In MENU operations, the CH+/- (or
)
buttons are used to select item upwards
Menu Introduction
/
or downwards; the VOL+/- (or
)
buttons are used to adjust or confirm
selected item.
Join to page 11
The selected item
displays in yello
If the marginal item is selec
Help information for menu
To adjust the picture's contr
To adjust the picture's colour
To adjust the picture's brigh
To adjust the picture's sharp
To adjust the picture's skin
Press MENU
button once
Press MENU
button
To select OSD language.
To set blue background.
To enter calendar.
Press MENU
button twice
To play game.
To limit some functions.
Press MENU
button
To set sleep timer.
To set the current time.
To set OFF timer.
ss MENU
on three times
To set ON timer.
To set alarm channel when
Press MENU
button
To set the colour system.
To set the sound system.
To set channel skip.
To set target channel that e
To exchange programs in c
To set current channel num
To select the band for curre
To fine tune manually.
ss MENU
on four times
To search program manuall
To search program automat
Join to page 11
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
!
In most cases, the function of CH+/- buttons are equal to the
buttons;
and the function of VOL+/- buttons are equal to the buttons.
/
Join to page 10
ted and there are some items that are not displayed yet, the or symbol twinkles.
perations (Press HELP button to display/cancel this help bar).
ast.
The Picture menu will be shielded if you set the AdjLimit
item to Off in SafeMode.
!
tness.
ness.
colour. (This item is available only in NTSC)
To set SafeMode function to On or Off.
The following item are available only when the SafeMode is set to On.
To set the maximum volume in SafeMode.
To set the maximum channel in SafeMode.
To turn on/off the Picture menu in SafeMode.
To turn on/off the Program menu in SafeMode.
To select input mode when you turn on by Power Switch.
To set whether the set auto search when you turn on by Power Switch.
This function will be turned off automatically after it is fulfilled successfully.
To set whether the set auto demonstratewhen you turn on by Power Switch.
This function will be be turned off automatically after it is fulfilled successfully.
To set a new password.
the T V set auto turns on by TimeOn function.
!
The Program menu will be shielded if you set the Search
item to Off in SafeMode.
changes its program with current channel's program.
urrent channel and target channel.
ber.
nt channel.
y, it stops if a certain program is found.
ically
Join to page 10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on/off
Turning on
1.
Press the Power Switch on the TV set.
If no picture appears, then the TV set is in STANDBY mode.
Now please follow step 2.
In STANDBY mode, press the button on the
remote controller and the TV set is turned on.
2.
3.
1
2
In STANDBY mode, you can also press the
AV/TV button on the set to turn on.
!
3
Notes:
If there is no input signal, then a blueback appears. After 15
minutes, the set auto goes to STANDBY.
Turning off
Press the Power Switch on the TV set if you want
1.
to cut off the power completely.
2.
If you want to turn off the TV set temporarily,
press the button on the remote controller.
!
Notes:
There are three kinds of Auto-Power-Off function:
A. When there is no input signal for 15 minutes.
B. Sleep-timer function.
C. Off-timer function
However, in the mode of Game or Break, the function of
Auto-Power-Off if no signal is received will be ineffective
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Input Signal
Select input signal
1.
Press AV/TV button on the TV set or AV button
on the remote control.
When the set is in TV mode, press this button and the set goes
to AV mode. Now you could watch video program from AV
input terminals.
If you want to switch to TV press AV button again or follow
step 2, 3 or 4.
2.
3.
Press the digit buttons to switch back to TV mode.
Press CH+ or CH- button to switch back to TV
mode.
3
2
1
4. Press
button to switch back to TV mode.
5
Press DSP button, the set displays current
input mode.
4
The OSD disappears in about 5
seconds.
SafeMode 18:09 19
Notes:
If the Timer item has been set, the
current time also appears.
If the SafeMode is turned on, the
"SafeMode" also appears
3
3
1
5
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press MENU button four times to display Program menu.
2. Press CH+/- button to select item.
Tuning in
3. Press VOL+/- button to confirm or adjust the selected item.
Auto Search
Enter the Program menu and select
Auto item.
Press VOL+ or VOL- button and the
TV set starts Auto Channel Preset.
All Active channels will be preset and
stored into the memory automatically.
After presetting, the TV will stop at
the last channel program. During the
process of Auto channel preset, pressing the MENU or CH+/-
button will stop the process.
Note:
Before you start Auto Search, we strongly recommend you to
set a proper Sound System according to your local area.
Please refer to the steps of Sound System setting on page 16.
3
2
1
Manual Search
Use manual search function if desired channels cannot be
preset or if you would like to preset channels to specific
position numbers one by one.
Please Select a channel number with
digital buttons or CH+/- buttons. You
can also enter program menu, select
Display item and adjust with VOL+/-
button manually to select the desired
channel number (from 0~254)
HELP
In Program menu, please select Manual item and start
manual search with VOL+/- buttons. Pressing VOL+, the set
searches towards higher frequency; Pressing VOL-, the set
searches towards lower frequency. The search stops when a
program is found and the is program will be stored in the
specified position number
1
2
3
2
3
You can use Band selection to quicken search process if you
know which band your desired program is located in. The band
switches among VHF-L, VHF-H and UHF.
Repeat the above steps if you want to store another program in
other position number.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Skipping
You can skip unnecessary channels by using Skip function
when you browse by CH+/- buttons.
Please select a channel number with
digit buttons or CH+/- buttons. You
can also enter program menu, select
Display item and adjust with VOL+/-
buttons manually to select the desired
channel number (from 0~254). For
example channel 9.
In Program menu, please select Skip item and press VOL+ or
VOL- button to select On.
Now channel 9 will be skipped when you browse channel by
CH+/- buttons.
3
2
1
To restore a skipped channel, please exit menu first and use
digit buttons to select the skipped channel number you want
to restore. Then enter the Program menu, select Skip item
and set this item to Off.
Fine tuning
Fine tuning is not necessary under normal conditions. However, in
area of inferior broadcast conditions where adjustment is
necessary for a better picture and sound, use Fine tuning.
Please select a channel number with
digit buttons or CH+/- buttons. You
can also enter program menu, select
Display item and adjust with VOL+/-
buttons manually to select the desired
channel number (from 0~254).
HELP
1
2
3
2
3
In Program menu, please select Fine item and adjust with
VOL+ or VOL- buttons until the best picture and sound are
obtained.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in
(Continued)
Channel exchange
When auto channel preset is finished, you can edit the order of
programs by using the channel exchange function.
Please enter Program menu and
select Target item.
Press VOL+ or VOL- button to select a
target channel number that you would
like to exchange with the current
channel. Then select Channel
Change item and confirm with VOL+/-
buttons
Now the programs in the current
channel and target channel will
exchange.
You can select the current channel in
the Program menu by adjusting
Display item.
3
1
2
Setting colour system
If the picture colour is abnormal, maybe the colour system setting
is wrong. Then you can adjust colour system as follows.
Please enter Program menu and
select ColorSys item, then press
VOL+ or VOL- button to select a
proper colour system.
HELP
1
2
3
Setting sound system
2
3
If the sound is abnormal, maybe the sound system setting is
wrong. Then you can adjust sound system as follows.
Please enter Program menu and
select SoundSys item, then press
VOL+ or VOL- button to select a
proper sound system.
Note:
Some models are only with one
sound system and in this case the
sound system does not need to be
adjusted.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Selection
1. Use Direct Channel Selector (0-9 and -/-- buttons)
To select one-digit channel:
Press 0-9 direct
channel selector.
Press -/-- button
repeatedly to
display "-".
8
To select two-digit channel:
Press 0-9
buttons.
Press -/-- button
repeatedly to
display "--".
Press 1-9
buttons.
18
-1
--
2
To select three-digit channel:
Press -/-- button
repeatedly to
display "--"
-- 1
---
-16
168
1
3
Press 1-2
buttons.
Press 0-9
buttons.
Press 0-9
buttons.
Notes:
The maximum channel number is 254, the set does not act if the
channel number you input is out of the range of 0~254 or the number
you input is out of the range which is limited in SafeMode.
2
2
2. Use CH+ or CH- button
Press CH+ button, the channel number increases;
Press CH- button, the channel number decreases.
3. Use previous channel
button
Press this button to switch between the current channel and
previous channel.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Picture
1. Press MENU button to display Picture menu.
2. Press CH+/- button to select item.
3. Press VOL+/- button to adjust the selected item.
VOL-
weaker
paler
Item
Contrast
Color
VOL+
stronger
deeper
Brightness
Sharpness
Tint*
darker
softer
purplish
lighter
sharper
greenish
* Note: The item TINT is for NTSC only.
The adjusted settings are stored in the Personal mode.
There are three preset picture modes and one User-set
3
1
2
|
picture mode. Press the
button to select a picture
mode according to your favourites.
|
4. Press
button to select picture mode.
Picture mode
Standard Dynamic
Item
Softness
100
80
Contrast
Color
Brightness
Sharpness
50
50
30
50
50
50
50
50
50
80
100
50
4
2
Tint*
50
HELP
1
Note: The above parameters maybe different in different
models.
3
2
3
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control
1. Use VOL+ or VOL- button.
Press VOL+ button, the volume increases;
Press VOL- button, the volume decreases.
2. Use MUTE button.
Press MUTE button, and the volume
decreases to half of the original volume
before you adjust.
This mode is useful when many people
are watching TV and one of them is going
to answer a telephone call.
1
Press MUTE button again to mute the
sound completely.
In this mode, you can resume the sound
of half of the original volume by pressing
VOL+/- buttons.
Press MUTE button once again to
resume the sound completely.
3
1
3. Use BREAK button.
Press BREAK button and the TV set goes into break mode. In this
mode, the picture will be hidden and the volume becomes to half of
the original volume. This function enables user to have a rest to
protect the eyesight. Pressing BREAK button again or switching to
other channel can exit this mode.
This function is useful in the following situations.
A. When you only want to listen to the sound, you can shield the picture
to protect CRT.
2
1
B. When you use the TV set as an audio amplifier. In AV mode, you
can input external audio CD signal to the audio inputs and switch the
set to BREAK mode to avoid Auto-Power-Off function if there is no
video input signal for 15 minutes
C. When you are playing games and you do not want to see the
background picture, you can shield the picture first and then enter
into Game.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock Setting
Setting sleep timer
Please enter the Clock menu and
select Sleep item.
Press VOL+ or VOL- button to select
between Off, 10, 20, 30, 40, 50 and 60
(minutes). When the sleep time
elapses, the TV set goes to STANDBY
automatically.
You also can set the sleep time by
using SLP button directly
3
2
1
Setting clock
Please enter the Clock menu and
select Timer item.
Press VOL+ or VOL- button to set
current time
Notes:
The Time Off and Time On items are
available only after you finish setting
the Timer item.
HELP
1
2
Setting OFF timer
3
2
Sleep
Please enter the Clock menu and
select TimeOff item.
Press VOL+ or VOL- button to set
OFF time.
3
The TV set in working mode auto goes
to STANDBY when the OFF time
elapses.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting ON timer
Please enter the Clock menu and
select TimeOn item.
Press VOL+ or VOL- button to set ON
Time.
After you finish setting Time On item,
press the STANDBY button on the
remote control. Then the TV set auto
turns on when your preset time elapses.
Clock
Sleep
Timer
TimeOff
TimeOn
Alarm Channel - -
60
10 : 00
22 : 00
18 : 00
Notes:
The Alarm Channel item is available only after you finish setting Time On
item.
3
2
1
Setting alarm channel
Please enter the Clock menu and
select Alarm item.
Press VOL+ or VOL- button to select
channel number.
When the preset ON time elapses, the
set auto turns on and goes to the
channel set on the Alarm item.
Clock
Sleep
60
Timer
TimeOff
TimeOn
10 : 00
22 : 00
18 : 00
Alarm Channel 99
!
Notes:
HELP
1.When you adjust time by VOL+ or VOL- button, the increasing/
decreasing step of time is 1 minute in every press. If you press and
hold the button for more than 1 second, the step of time is 1 hour.
2. Once the functions of Time On or Time Off fulfil, you need to set
the On Time or Off Time again if you want to use this function next
time.
1
2
3
2
3
3.
After you finish setting Time Off item, if the set auto goes to
STANDBY because there is no signal input for a continuous 15
minutes, or if you turn off manually, then the preset Off Time will be
cancelled. As the same way, turn on the set in advance will cancel
the Time On and Alarm Channel settings.
Once you turn off the set by press the Power Switch, all settings
in the Clock menu page will be cancelled in next time's turning on.
4.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press MENU button twice to display System menu.
2. Press CH+/- button to select item.
System Setting
3. Press VOL+/- button to adjust the selected item.
Setting OSD language
Please enter the System menu and
select Language item.
Press VOL+ or VOL- button to select
the OSD Language.
Setting blue background
Please enter the System menu and
select BlueBack item.
Press VOL+ or VOL- button to select
On or Off.
3
2
1
If you set the BlueBack item to On,
when there is no signal or the signal is
too poor, then a blue background and
a dynamic map will appear.
If you set the BlueBack item to Off, when there is no signal, the
screen display a noisy picture.
Notes:
In the mode of screen saver, when the signal is re-input, the TV
set will display the program in about 5 seconds because it needs
to exist screen saver first.
Calendar
HELP
Calendar
1
Please enter the System menu and
select Calendar item.
Press VOL+ or VOL- button to enter.
2
3
2
3
In Calendar interface, press CH+/-
buttons to select year, month or date;
press VOL+/- buttons to adjust.
The Calendar is from 1901 to 2050.
Notes;
You can also enter Calendar interface
by using CAL button on the remote
control.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Game
Please enter the System menu and
select Game item.
Press VOL+ or VOL- button to enter
Game Select menu.
Press CH+ or CH- button to select
Box Man Map item and select a
game map with VOL+ or VOL- button.
Press CH+ or CH- button to select
Game Start item, press VOL+ or
VOL- to start game.
Notes;
3
2
1
You also can enter into Game
interface directly by using GAME
button
How to play the name?
Description of icons:
:the man you control.
:the box to push.
:the destination to push the box to.
:the wall.
GAME
HELP
UNDO
1
The player should control the man to push the box (just push, not pull)
to the destinations within the wall by using CH+ CH-, VOL+ and VOL-
buttons. When you push all boxes to the relevant destinations then
you win and it goes to next map.
2
3
You can press UNDO button to cancel your last action.
Press GAME button to exit game. If you want to play again then press
GAME button again.
2
3
Notes:
1. You can not pull the box, but push it.
2. If there is wall in front of the box, you can not push it.
3. If there are two continual boxes, you can not push them.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Safe Mode
SafeMode introduction
Please enter the System menu and
select SafeMode item.
Press VOL+ or VOL- button to enter
SafeMode menu
If you never set password for Safe
Mode or you set the SafeMode item to
Off, you can directly enter into
SafeMode menu without password,
otherwise, a four digit password is
necessary before you can enter into
SafeMode menu. The TV set exit the
menu automatically if you continuously
input wrong password three times.
There are nine items in the SafeMode
menu. Press CH+/- buttons to select
item and VOL+/- buttons to adjust.
3
2
1
Setting SafeMode item
Please enter the SafeMode menu and
select SafeMode item.
Press VOL+ or VOL- button to select
On or Off.
If you set this item to On, and set a
password, you will be asked to input a
password next time when you enter
SafeMode. Therefore, please
remember the password if you turn on the SafeMode. If you call the
OSD, the screen displays "SafeMode" to indicate that the
SafeMode is turned on.
HELP
1
2
3
If the SafeMode is turned off, the following items can not be
accessed, and the password is unnecessary when you enter the
SafeMode menu
2
3
Setting VolLimit item
Please enter the SafeMode menu and
select VolLimit item.
Press VOL+ or VOL- button to select
the limitation volume ranging from 0-100.
For example, you set the limitation volume
to 50, then the user can only adjust the
volume from 0-50.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting CH.Limit item
Please enter the SafeMode menu and
select CH.Limit item.
Press VOL+ or VOL- button to select
the limitation channel number ranging
from 0-254.
For example, you can set the limitation
channel number to 99, the the user can
only select the channel from 0-99.
Making use of channel limitation and channel exchange functions, you
can limit some channels and turn off the Program menu to forbid other
user watching these channels programs.
3
2
1
Setting AdjLimit item
Please enter the SafeMode menu and
select AdjLimit item.
Press VOL+ or VOL- button to select
On or Off.
If you set this item to Off, the Picture menu
will be shielded in normal watching. The
user can not adjust picture.
Setting Search item
Please enter the SafeMode menu and
select Search item.
HELP
Press VOL+ or VOL- button to select
On or Off.
If you set this item to Off, the Program
menu will be shielded in normal watching.
The user can not search program or tune
the TV set.
1
2
3
2
3
Setting OnInput item
Please enter the SafeMode menu and
select OnInput item.
Press VOL+ or VOL- button to select
between Off, AV or TV-0.
If you select Off, the next time when you turn
on by Power Switch, the TV set directly
goes into the mode that you turn off last
time.
If you select AV, next time when you turn on by Power Switch, the TV
set directly goes into AV input mode.
If you select TV-0, net time you turn on by Power Switch, the TV set
directly goes to channel 0.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Safe Mode
Setting OnSearch item
Please enter the SafeMode menu and
select OnSearch item.
Press VOL+ or VOL- button to select
On or Off.
If you set this item to On, next time you turn
on by Power Switch, the TV set searches
program and set system automatically
(please make sure that the antenna connection is OK before you
turn on). Once the OnSearch is fulfilled successfully, this item will be set
to Off automatically so that the set does not search program when you
turn on by Power Switch next time.
3
2
1
Setting OnDemo item
Please enter the SafeMode menu and
select OnDemo item.
Press VOL+ or VOL- button to select
On or Off.
If you set this item to On, next time you turn
on by Power Switch, the TV set
demonstrates menu operation for about 1
minute first.
0-9
digit
buttons
Once the OnDemo is fulfilled successfully, this item will be set Off.
HELP
Setting PassWord item
1
If you want to set a new password,
Please enter the SafeMode menu and
select Password item.
2
3
2
3
Please input 4-digit password by using
the 0-9 digit buttons first, then the set asks
you to input again and you should input the
same password again as you input first
time. If you do so successfully, the new
password will be accepted and the screen
displays OK. Otherwise, the set asks you
to repeat the above steps.
Notes:
If you forget your password and fail to enter
the SafeMode menu, you can use the
super password as "5 4 3 2" to enter. Now
please set a new password and remember
it.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble
you are experiencing.
Symptoms
Check the following items
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly adjusted
Power is not turned on
Poor colour, poor tint
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Spots appear on the screen
Possible interference of electronic interference
from another TV set, a computer, an electronics
game machine, a broadcast station, etc.
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
This may be caused by reflections from nearby
mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or
comes off.
Check the antenna direction.
Any one of the following:
No picture menu page
No program menu page
The maximum volume can
reach 100
Press "DSP" button to check whether the TV set is
in Safe Mode.
Some Channels can not be
accessed
Even if the picture or the sound is normal, changes
in room temperature sometimes makes the TV
cabinet expand or contract, making a noise. This
does not indicate a malfunction.
TV cabinet creaks
The batteries may be worn out.
The batteries may be installed with their polarity
reversed.
Remote controller does
not work
When the set is switched on, do not shift or move
the set around. Sometimes it may develop an
unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with
the POWER switch and wait for 10 minutes before
switching on again.
Unevenness in colour in
some parts of the screen
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply:
Power Consumption:
Dimensions(mm):
Weight(kg):
AC 240V, 50Hz
60W
366(W) x 333(H) x 373(D)
12
CRT:
34cm
TV system & channel range
System
VHF
2-12
UHF
CATV
PAL-B/G
21-69
X~Z+2,S1~S41
Color System:
Sound output:
Accessories:
PAL-B/G NTSC playback
1W x 2
Remote controller X 1
!
Design and specifications are subject to change without notice.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-J14F3-02
Download from Www.Somanuals.com. All Manuals Search And Download.
|