16-132.fm Page 1 Tuesday, July 20, 1999 8:46 AM
Cat. No. 16-132
OWNER’S MANUAL
Please read before using this equipment.
5-Inch Black and White
Television
with AM/FM Stereo and
Cassette Recorder
with AM/FM Radio
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 3 Tuesday, July 20, 1999 8:46 AM
: To reduce the risk of
WARNING
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
: TO REDUCE THE RISK OF
CAUTION
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompany-
ing this product.
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 4 Tuesday, July 20, 1999 8:46 AM
CONTENTS
Power Sources ........................................................................................................ 5
Using Internal Battery Power .............................................................................. 5
Using AC Power ................................................................................................. 6
Using Vehicle Battery Power .............................................................................. 6
Preparation .............................................................................................................. 8
Connecting Antennas ......................................................................................... 8
Built-In Antenna ........................................................................................... 8
Outdoor Antenna .......................................................................................... 8
Connecting Earphones ....................................................................................... 9
Listening Safely ............................................................................................ 9
Traffic Safety ................................................................................................ 9
Using the TV .......................................................................................................... 10
TV Reception Tips ............................................................................................ 11
Using the Radio ..................................................................................................... 12
Radio Reception Tips ....................................................................................... 12
Using the Cassette Recorder ............................................................................... 13
Loading a Cassette Tape .................................................................................. 13
Playing a Cassette Tape ................................................................................... 13
Recording a Cassette Tape .............................................................................. 14
Recording from the Radio/TV .................................................................... 14
Making Live Recordings ............................................................................. 15
Tape Care Tips ................................................................................................. 15
Erasing a Cassette Tape ............................................................................ 15
Preventing Accidental Erasure ................................................................... 15
Restoring Tape Tension and Sound Quality ............................................... 16
Cleaning the Tape-Handling Parts ............................................................. 16
Care and Maintenance .......................................................................................... 17
Changing the Fuse ........................................................................................... 18
The FCC Wants You to Know ........................................................................... 18
Specifications ........................................................................................................ 19
4
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 5 Tuesday, July 20, 1999 8:46 AM
POWER SOURCES
You can power your TV/radio/cassette
from three power sources:
2. Install ten D batteries in the battery
compartment as indicated by the
polarity symbols (+ and –) marked
inside.
• internal battery power (using ten D
batteries, not included)
illus of battery placement
with polarity symbols
• standard AC power (using the sup-
plied AC adapter)
• vehicle battery power (using the
supplied DC power cord)
Caution: Installing the batteries with
incorrect polarity can damage your
TV.
USING INTERNAL
BATTERY POWER
3. Replace the cover.
You can power the TV from ten D batter-
ies. We recommend alkaline batteries
(such as Cat. No. 23-650) for the long-
est life.
Notes:
• When the TV picture shrinks or the
cassette player’s playback slows,
replace the batteries.
Cautions:
• Battery life can vary greatly,
depending on how you use your TV/
radio/cassette.
• Use only fresh batteries of the
required size and recommended
type.
• Do not mix old and new batteries or
different types of batteries.
Cautions:
• Always remove old or weak batter-
ies. Batteries can leak chemicals
that can destroy electronic parts.
Follow these steps to install batteries.
1. Carefully turn the TV upside-down
and gently push the battery com-
partment cover in the direction of
the arrow marked on the cover.
Then lift off the cover.
• Dispose of old batteries promptly
and properly.
• If you do not plan to use your TV/
radio/cassette for a month or more,
or if you plan to use only AC or DC
power, remove the batteries.
illus of battery cover
removal
5
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 6 Tuesday, July 20, 1999 8:46 AM
USING AC POWER
USING VEHICLE BATTERY
POWER
To use AC power, connect the supplied
DC: 12 15V
jack on
AC adapter to the
~
Follow these steps to power the TV/ra-
dio/cassette from your vehicle’s ciga-
rette-lighter socket using the supplied
DC power cord.
the back of TV/radio/cassette. Then plug
the other end into a standard AC outlet.
When you connect the AC adapter, the
batteries automatically disconnect.
1. Make sure the supplied DC power
cord’s knurled ring is screwed firmly
onto its plug.
illus of DC 12-15V location
and connection to
AC outlet
illus of DC power cord
plug w/knurled ring
Cautions:
• The supplied AC adapter supplies
12 volts DC, delivers 1300 milli-
amps, and has a center positive
plug which properly fits the TV/radio/
2. Plug the small end of the supplied
DC 12-15V
DC power cord into the
jack on the back of the TV/radio/
cassette.
DC: 12 15V
jack. Using
cassette’s
~
an adapter that does not meet these
specifications could damage the TV/
radio/cassette or the adapter.
illus of DC 12-15V location
• Always unplug the AC adapter from
the AC outlet before you unplug it
from the TV/radio/cassette.
Cautions:
• The supplied DC power cord sup-
plies 12 volts DC, delivers 1300
milliamps, and has a center posi-
tive plug that properly fits the TV/
DC 12-15V
radio/cassette’s
jack.
Using a power cord that does not
meet these specifications could
damage the TV/radio/cassette or
the power cord.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 7 Tuesday, July 20, 1999 8:46 AM
• Always unplug the DC power cord
from the cigarette-lighter socket
before you unplug it from the TV/
radio/cassette.
3. Plug the large end of the DC power
cord into the cigarette lighter socket.
When you connect the DC power
cord, the batteries automatically dis-
connect.
illus of
connection to cigarette
lighter socket
Note: If the TV/radio/cassette stops
working, check the fuse in the DC power
cord (see “Changing the Fuse” on Page
18).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 8 Tuesday, July 20, 1999 8:46 AM
PREPARATION
• If the outdoor antenna wire or CATV
cable is 75-ohm coaxial cable, con-
nect the cable to the TV/radio/cas-
sette’s ANT IN jack using an F-to-1/8-
inch miniplug adapter (such as Cat.
No. 278-257, not supplied).
CONNECTING ANTENNAS
Built-in Antenna
The built-in telescoping antenna usually
provides good reception of FM, VHF,
and UHF broadcast signals.
Note to CATV System Installer: This
reminder is provided to call the CATV
system installer’s attention to Section
820-40 of the NEC, which provides
guidelines for proper grounding and, in
particular, specifies that the cable
ground shall be connected to the
grounding system of the building, as
close to the point of cable entry as prac-
tical.
Extend the antenna vertically to its full
length for channels 2 to 6 (VHF-LOW)
and 14 to 69 (UHF).
Extend the antenna to a shorter length
for the best reception of channels 7 to
13 (VHF-HIGH).
Outdoor Antenna
Notes:
For improved reception, you can con-
nect an optional outdoor VHF/UHF an-
tenna to the ANT IN jack on the back of
the TV/radio/cassette using these guide-
lines.
• Your local RadioShack store has a
wide selection of antennas and
adapters to choose from.
• For better TV signal reception in
your vehicle, you can connect a
mobile TV antenna (such as Cat.
No. 15-1614, not included.)
illus of ANT IN location
• If the outdoor antenna wire is 300-
ohm double lead-in wire, connect
the wire to the TV/radio/cassette’s
ANT IN jack using a screw terminal
to 1/8-inch plug adapter (such as
Cat. No. 15-1148, not supplied).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 9 Tuesday, July 20, 1999 8:46 AM
Traffic Safety
CONNECTING
EARPHONES
Do not wear earphones while operating
a motor vehicle or riding a bicycle. This
can create a traffic hazard and could be
illegal in some areas.
For private listening, plug a pair of op-
tional earphones with a 1/8-inch (3.5 mm)
PHONES
mini-plug into the
jack on the
side of the TV/radio/cassette.
Even though some earphones let you
hear some outside sounds when listen-
ing at normal volume levels, they still
can present a traffic hazard.
illus of PHONES location
Listening Safely
To protect your hearing, follow these
guidelines when you use earphones.
• Set the volume to the lowest setting
before you begin listening. After you
begin listening, adjust the volume to
a comfortable level.
• Do not listen at extremely high vol-
ume levels. Extended high-volume
listening can lead to permanent
hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a vol-
ume level that does not cause dis-
comfort might still damage your
hearing.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 10 Tuesday, July 20, 1999 8:46 AM
USING THE TV
1. Slide TAPE/RADIO/TV to TV.
5. Turn V-HOLD, BRIGHT, and CON-
TRAST on the back of the TV/radio/
cassette to adjust the picture as
necessary.
illus of TAPE/RADIO/TV
location
illus of V-HOLD/BRIGHT/
CONTRAST location
2. Set LO VHF HI/UHF to the desired
band.
V-HOLD — adjust when the picture
rolls up or down.
illus of LO VHF HI/UHF
location
BRIGHT — adjust when the picture
is too dark or too bright.
CONTRAST — adjust to increase or
decrease picture contrast.
LO — to select the VHF low chan-
nels (2 to 6)
6. Adjust TONE for the best sound.
HI — to select the VHF high chan-
nels (7 to 13)
illus of TONE
location
UHF — to select the UHF channels
(14 to 69)
3. Turn TUNING to the desired station.
7. Turn VOLUME to adjust the volume
to a comfortable level.
illus of TUNING location
illus of VOLUME
location
4. Adjust the telescoping antenna for
the best picture and sound.
8. To turn off the TV, set TAPE/RADIO/
TV to TAPE.
illus of antenna adjustment
10
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 11 Tuesday, July 20, 1999 8:46 AM
TV RECEPTION TIPS
If the image is blurry, unstable, or
snowy, the signal reception might be
weak. This can be caused by your loca-
tion or the telescoping antenna’s posi-
tion and length. Buildings with steel
construction can also cause reception
problems. Try changing the antenna’s
position and length. If this does not help,
use an outdoor antenna.
If the image does not fill the screen
when you are using battery power, the
batteries are weak. Replace the batter-
ies.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 12 Tuesday, July 20, 1999 8:46 AM
USING THE RADIO
1. Slide TAPE/RADIO/TV to RADIO.
RADIO RECEPTION TIPS
2. Set AM/FM/FM STEREO to the band
you want to hear. For FM stereo
reception, set it to FM STEREO.
For improved reception, connect an op-
tional outdoor VHF/UHF antenna to the
ANT IN jack on the back of the TV/radio/
cassette using these guidelines.
illus of AM/FM/FM STEREO
location
illus of ANT IN location
Notes:
• For the best FM reception, adjust
the telescoping antenna.
• If the outdoor antenna wire is 300-
ohm double lead-in wire, connect
the wire to the TV/radio/cassette’s
ANT IN jack using an external 300-
ohm antenna adapter (not supplied).
• To improve reception of a weak
FM stereo station, set AM/FM/FM
STEREO to FM. The output is
mono, but the sound might
improve.
• If the outdoor antenna wire or CATV
cable is 75-ohm coaxial cable, con-
nect the cable to the TV/radio/cas-
sette’s ANT IN jack using an F-to-1/8-
inch miniplug adapter (such as Cat.
No. 278-257, not supplied).
3. Turn TUNING to the desired station.
illus of TUNING location
Note: Your local RadioShack store has
a wide selection of antennas and adapt-
ers to choose from.
4. Turn VOLUME to adjust the volume
to a comfortable level.
Weak AM reception might be caused by
the distance from the station or by oper-
ating the TV/radio/cassette in a building
with steel construction. Turn the TV/ra-
dio/cassette in different directions for the
best reception.
5. Adjust TONE for the best sound.
6. To turn off the radio, set TAPE/
RADIO/TV to TAPE.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 13 Tuesday, July 20, 1999 8:46 AM
USING THE CASSETTE RECORDER
The cassette recorder has a full-release
PLAYING A CASSETTE
TAPE
auto-stop system to protect tapes and
prevent pinch roller damage. When a
tape reaches the end of a side, the tape
mechanism automatically stops and re-
leases the tape.
1. Load a tape.
2. Set TAPE/RADIO/TV to TAPE.
3. Press PLAY. The button locks down
and the tape begins to play.
LOADING A CASSETTE
TAPE
illus of PLAY location
1. Take up any slack in the cassette
tape by turning the hub with a pen-
cil. This helps prevent the tape from
tangling in the record/playback
mechanism. Avoid touching the tape
with your fingers.
Notes:
• To temporarily stop playback,
press PAUSE. Press PAUSE again
to continue playback.
2. Press STOP/EJECT to open the cas-
sette compartment door.
illus of PAUSE location
illus of STOP/EJECT location
• To fast-forward or rewind the
tape, press STOP/EJECT, then
press FAST-F or REWIND.
3. Insert the tape into the guides on the
door with the exposed tape edge
facing out, the side you want to play
facing up, and the full reel to the left.
illus of REWIND, FAST-F, and
REWIND locations
illus of cassette insertion
To stop fast-forward or rewind,
press STOP/EJECT again.
4. Close the compartment door.
4. Adjust VOLUME and TONE for the
desired sound.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 14 Tuesday, July 20, 1999 8:46 AM
5. The tape plays until it reaches the
end of the side, then it automatically
stops. To stop play before it auto-
matically stops, press STOP/EJECT.
• Tape quality greatly affects the qual-
ity of the recording. For low-noise,
wide-range recordings, use normal-
bias tape.
6. Press STOP/EJECT while the cas-
sette player is stopped to open the
cassette compartment and turn the
tape over or remove it.
Recording from the Radio/TV
1. Load a blank cassette tape or one
you want to record over.
2. Press PAUSE then RECORD. PAUSE,
RECORDING A CASSETTE
TAPE
RECORD, and PLAY lock down.
3. Set TAPE/RADIO/TV to RADIO or TV
as desired.
You can record from the radio or TV, or
use the built-in microphone to make a
live recording.
4. Select the desired TV or radio sta-
tion, then press PAUSE to release
the button and start recording.
For the best performance, use only reg-
ular length (60- or 90-minute) cassette
tapes. We do not recommend long-play-
ing cassette tapes, such as C-120s, be-
cause they are extremely thin and can
easily tangle in the playback mecha-
nism.
Notes:
• To temporarily stop recording,
press PAUSE. Press PAUSE again
to resume recording.
• When you record broadcasts from
AM radio, you might hear a low
hum or whistling sound that can
be recorded on the tape. If you
do, set BEAT CUT to the other
position and record again.
If you use a cassette tape with
Caution:
the erase-protection tabs removed, do
not force down RECORD. This can dam-
age the recording mechanism. See
“Preventing Accidental Erasure” on
Page 15.
illus of BEAT CUT location
Notes:
• The automatic level control feature
automatically sets the recording
level. TONE and VOLUME have no
effect on the recording.
5. The system records on the cassette
until it reaches the end of the side,
then it automatically stops. To stop it
sooner, press STOP/EJECT.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 15 Tuesday, July 20, 1999 8:46 AM
Making Live Recordings
Preventing Accidental Erasure
Follow these steps to make live record-
ings using the built-in microphone.
Cassette tapes have two erase-protec-
tion tabs — one for each side. To protect
a recording from being accidentally re-
corded over or erased, use a screwdriv-
er to carefully break off one or both of
the cassette tape’s erase-protection
tabs.
1. Set TAPE/RADIO/TV to TAPE.
2. Load a blank cassette tape, or one
you want to record over.
3. Place the TV/radio/cassette 2 to 3
feet from the recording source.
illus of cassette with erase-
protection tabs labeled
4. Press RECORD to begin recording.
Both PLAY and RECORD lock down.
5. The tape stops automatically when it
reaches the end of the side. To stop
it sooner, press STOP/EJECT.
If you want to record on a tape side after
you have removed the erase-protection
tab, place a piece of strong plastic tape
over that side’s tab hole.
TAPE CARE TIPS
Erasing a Cassette Tape
Notes:
To erase a previously recorded section
of a tape, simply record over it. To erase
the entire cassette tape, let the tape
record to the end without the radio, TV,
or another source playing.
illus of cassette with erase-
protection tab removed and
piece of tape being
applied
• Be sure you cover only the hole
originally covered by the erase-pro-
tection tab.
You can quickly erase both sides of a
cassette tape using a bulk tape eraser,
available at your local RadioShack
store.
• Removing the erase-protection tabs
does not prevent a bulk eraser from
erasing a cassette tape.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 16 Tuesday, July 20, 1999 8:46 AM
1. Set TAPE/RADIO/TV to TAPE.
Restoring Tape Tension and
Sound Quality
2. Remove the batteries or disconnect
the AC or DC power source.
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
3. Open the cassette compartment
cover.
4. Hold down the erase-protection tab
sensor, then press RECORD to
expose the record/playback and
erase heads.
To restore the sound quality, fast-for-
ward the tape from the beginning to the
end of one side, then completely rewind
it. Then loosen the tape reels by gently
tapping each side of the cassette’s outer
shell on a flat surface.
illus of tab sensor
Caution: Be careful not to damage the
cassette when tapping it. Do not touch
the exposed tape or allow any sharp ob-
jects near the cassette.
5. Use a cotton swab dipped in tape
head cleaning solution or denatured
alcohol to gently clean the capstans,
pinch rollers, tape guides, and tape
heads.
Cleaning the Tape-Handling
Parts
illus of tape
Dirt, dust, or particles of the tape’s coat-
ing can accumulate on the tape heads
and other parts that the tape touches.
This can greatly reduce the cassette
player’s performance.
handling part
6. Press STOP/EJECT and close the
cassette compartment cover. Then
reconnect power.
To prevent noise and poor high-frequen-
cy response, clean the cassette player’s
tape handling parts after every 20 hours
of use. Your local RadioShack store
sells a complete line of cassette clean-
ing supplies. You can use a cassette
tape cleaning kit (such as Cat. No. 44-
1162), or follow these steps.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 17 Tuesday, July 20, 1999 8:46 AM
CARE AND MAINTENANCE
Your Optimus 5-Inch Black and White Television is an example of superior design
and craftsmanship. The following suggestions will help you care for your TV/radio/
cassette so you can enjoy it for years.
Keep the TV/radio/cassette dry. If it gets wet, wipe it dry immediately.
Liquids might contain minerals that can corrode the electronic circuits.
Handle the TV/radio/cassette gently and carefully. Dropping it can dam-
age circuit boards and cases and can cause the TV/radio/cassette to
work improperly.
Use and store the TV/radio/cassette only in normal temperature envi-
ronments. Temperature extremes can shorten the life of electronic de-
vices and distort or melt plastic parts.
Keep the TV/radio/cassette away from dust and dirt, which can cause
premature wear of parts.
Wipe the TV/radio/cassette with a damp cloth occasionally to keep it
looking new. Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the TV/radio/cassette.
Modifying or tampering with the TV/radio/cassette’s internal components can cause a
malfunction and might invalidate your TV/radio/cassette’s warranty and void your
FCC authorization to operate it. If your TV/radio/cassette is not performing as it
should, take it to your local RadioShack store for assistance.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 18 Tuesday, July 20, 1999 8:46 AM
CHANGING THE FUSE
THE FCC WANTS YOU TO
KNOW
If the TV/radio/cassette stops working
properly while using vehicle battery
power, follow these steps to check the
DC power cord’s 2 amp fuse. If the fuse
needs replacing, use only a fast-acting
2-amp fuse, such as RadioShack Cat.
No. 270-1007.
This TV/radio/cassette complies with the
limits for a Class B digital device as
specified in Part 15 of FCC Rules.
These limits provide reasonable protec-
tion against radio and TV interference in
a residential area. However, your TV
might cause TV or radio interference
even when it is operating properly. To
eliminate interference, you can try one
or more of the following corrective mea-
sures:
Caution: Do not use a fuse with a differ-
ent rating.
1. Unscrew the knurled ring and check
the fuse in the DC power cord.
• Reorient or relocate the receiving
antenna.
2. If the fuse is bad, replace it.
illus of disassembled fuse
holder with knurled ring,
fuse visible
• Move your TV/radio/cassette away
from the TV or radio receiving the
interference.
• Connect your TV/radio/cassette to
an outlet on a different electrical cir-
cuit than the TV or radio receiving
the interference.
3. Replace the knurled ring and tighten
it securely.
• Consult your local RadioShack store
for assistance.
If you can not eliminate the interference,
the FCC requires that you stop using
your TV/radio/cassette.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 19 Tuesday, July 20, 1999 8:46 AM
SPECIFICATIONS
System .......................................................................................................... NTSC-M
Horizontal Resolution ................................................................................... 260 Lines
Receiving Channels ................................................................. Broadcast VHF: 2∠13
Broadcast UHF: 14∠69
Intermediate Frequency ............................. Picture IF Carrier Frequency: 45.75 MHz
Sound IF Carrier Frequency: 41.25 MHz
Maximum Sensitivity ....................... VHF: 45 dB µV max; UHF/CATV: 48 dB µV max
Radio Frequency ............................................ AM: 530–1710 kHz; FM: 88–108 MHz
Antenna .................................................................... VHF/UHF 75-Ohm Unbalanced
Power Source ..................................................................................... AC 120V, 60Hz
Power Consumption .......................................................................... 15 W Maximum
Output Power ........................................................................................................ 1 W
Load Impedance ............................................................................................. 8 Ohms
Frequency Response ................................................. 80 Hz–7 kHz (3 dB Bandwidth)
Total Harmonic Distortion ....................................................................................... 2%
Dimensions (HWD) .......................... 117/16 x 71/2 x 87/8 Inches (290 × 190 × 225 mm)
Weight ................................................................................................. 4 lb 7 oz (2 kg)
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
16-132.fm Page 20 Tuesday, July 20, 1999 8:46 AM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for ninety (90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABIL-
ITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-
cidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
8A8N
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|