Onkyo Stereo Receiver TX nr838 User Manual

TX-NR838

AV RECEIVER

Basic Manual

Advanced Manual found here

http://www.onkyo.com/manual/txnr838/adv/en.html

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Step 1:

Personal computer

HDMI

OUT

To use the ARC function, connect to the ARC

compatible HDMI jack of the TV and make an

appropriate setting on the unit. See "2nd Step :

Source Connection" of "Step 2: Setting Up".

HDMI cable

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

Blu-ray Disc/DVD player

Game console

Set-top box/Digital

video recorder, etc.

Satellite/Cable

set-top box, etc.

zꢀ

Audio connection with a TV not supporting ARC

For how to make settings, see the Advanced Manual (http://

www.onkyo.com/manual/txnr838/adv/en.html).

Connecting the TV and players

To connect the TV and the unit, connect the HDMI OUT MAIN

jack of the unit and the HDMI IN jack of the TV using an HDMI

cable. With this connection, it becomes possible to display

the setting screen of the unit on the TV or transmit video/

audio signals from the player to the TV. If your TV supports

ARC (Audio Return Channel), it is possible to play the TV

sound with the AV receiver's speakers with this connection

only. If your TV does not support ARC, you need, in addition

to the HDMI OUT MAIN jack connection, a digital optical cable

connection between the digital audio out optical jack of the

TV and the DIGITAL IN OPTICAL jack of the unit or an analog

audio (RCA) cable connection between the audio output jack

of the TV and the TV/CD analog audio input jack of the unit.

AUDIO

OUT

Important: The power cord must be connected only after all

other connections are completed.

DIGITAL

OPTICAL

OUT

HDMI Cable Connection

The unit has many HDMI jacks on its rear panel and each

of them corresponds to an input selector button of the same

name on the front panel. For example, a Blu-ray Disc player

will be connected to the IN 1 jack and the BD/DVD button

on the front panel will be used to listen to the playback

sound (if the player is CEC compliant, input will be switched

automatically). If you add another Blu-ray Disc player, you

can use any other jack than IN 1. It is possible to change

assignment of the input jacks and input selector buttons.

Select an appropriate

connection for your TV.

Another TV can be connected to the HDMI OUT SUB jack.

In this case, press MONITOR OUT on the main unit several

times to display "SUB" or "MAIN+SUB" and select the

output method. With the sub output, the operation screen for

Internet function, USB playback, or Bluetooth playback can

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1: Connections

„

be displayed. It is also possible to use the multi-zone function

with this jack. For details, see the section 6 "Using the multi-

zone function" of "Step 3: Playing Back".

Audio signal connection

5 Use a composite video cable to connect a TV with

composite video input jack or a player with composite

video output jack.

Digital connection: Use a digital optical cable

(OPTICAL) or digital coaxial cable (COAXIAL) for

connection with a player.

The unit supports the HDMI Through function that allows

transmission from players to the TV even if the unit is in

standby.You have to modify the settings to enable the input

selection link with CEC compliant device, connection with

ARC compatible TV, and HDMI Through function. See "2nd

Step : Source Connection" of "Step 2: Setting Up".

rꢀ To enjoy HDCP2.2 protected video, connect the player to

the IN3 jack and the TV to the HDMI OUT MAIN jack of

the unit.Your player and TV need to support HDCP2.2.

rꢀ To play 4K or 1080p video, use the high speed HDMI cable.

rꢀ It is possible to send video and audio of an MHL-enabled

mobile device by connecting the MHL-enabled mobile device

to the AUX INPUT HDMI/MHL jacks on the front panel.

Composite video cable

Digital optical cable (OPTICAL)

¼ꢀ

As the digital in optical jack of the unit has a

cover, push in the cable against the cover as it is

turned inside.

Video signals input to the composite video input

jack or the COMPONENT VIDEO input jacks will be

upconverted to HDMI signals and then output from

the HDMI output jack. Note that it is not possible to

convert digital audio input signals to analog or vice

versa.

Digital coaxial cable (COAXIAL)

Analog connection: Use an analog audio (RCA) cable

for connection with a player.

To enjoy multi-zone playback of audio of a CD player

or such other player without HDMI output jack, you

need to use the analog audio (RCA) cable to connect

the corresponding jacks of the player and this unit.

For details on the multi-zone function, see the section

6 "Using the multi-zone function" of "Step 3: Playing

Back".

Connecting Components without HDMI

If your AV component does not have HDMI jack, use an

available jack of your component for cable connection with

this unit. Just as the HDMI jacks, other jacks on this unit have

a preassigned input selector button on the front panel. See

the name of the input selector button shown with the jack

when connecting the device.

Analog audio (RCA) cable

Connection with turntable: If it uses an MM type

cartridge and does not have a built-in audio equalizer,

AV Receiver

connect it to the

PHONO jack. If the connected

turntable has a built-in audio equalizer, connect it to the

TV/CD jack.

¼ꢀ

When you upconvert video signals input to the

COMPONENT VIDEO jacks and output them from the

HDMI OUT jack, set the output resolution of the player

to 480i/576i. If the input has 480p/576p or higher

resolution, a message prompting you to change the

resolution setting will appear. If your player does not

support 480i/576i output, use the composite video

jack.

¼ꢀ

If it uses an MC type cartridge, install an audio equalizer compatible

with MC type cartridge between the unit and the turntable by

connecting it to the

instruction manual.

TV/CD jack. For details, refer to the turntable's

¼ꢀ

If the turntable has a ground wire, connect it to the GND terminal of

this unit. If connecting the ground wire increases noise, disconnect it.

¼ꢀ

If multiple video signal inputs are put into one input

system, the output will be made in the order of HDMI,

component video, and composite video.

„

Video signal connection

The unit has a video upconversion function. For details, see

the section on the right.

4 Use a component video cable to connect a TV

with component video input jacks and a player with

component video output jacks.

Component video cable

¼ꢀ

Its transmitted video has higher quality than that

of composite video cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1: Connections

Front R

Front L

Connecting speakers

Height R

Wide R

Wide L

Height L

Center

Important: The power cord must be connected only after all

other connections are completed.

3 9F

Front speakers

1 2

Center speaker

Surround speakers

Subwoofer

4 5

Surround back speakers

Height speakers

Wide speakers

7 8

9 F

G H

If there is only one

rꢀ 5.1 ch:

rꢀ 7.1 ch:

1 2 3 4 5 6

1 2 3 4 5 6 7 8

surround back

speaker, connect

it to the BACK L

terminal.

1 2 3 4 5 6 9 F

1 2 3 4 5 6 G H

rꢀ Up to two subwoofers can be connected.

rꢀ To use the multi-zone function, see the section 6 "Using

the multi-zone function" of "Step 3: Playing Back".

Surround R

Surround

back R

Surround

back L

Surround L

Subwoofer with built- Subwoofer with built-

in power amplifier in power amplifier

Important: %QPPGEVꢀURGCMGTUꢀYKVJꢀꢄꢀŝꢀVQꢀꢁꢂꢀŝꢀKORGFCPEGꢃꢀ

You have to modify the setting if any of the speakers have

ꢄꢀŝꢀQTꢀOQTGꢀVQꢀNGUUꢀVJCPꢀꢂꢀŝꢀKORGFCPEGꢃꢀ;QWꢀECPꢀUGVꢀWRꢀD[ꢀ

viewing the guidance displayed on the TV screen. Select

the item with the cursor buttons of the remote controller

and press ENTER to confirm your selection. To return to

the previous screen, press RETURN. Press RCV and then

HOME on the remote controller. Select "Setup" - "2.Speaker

Setup" - "Speaker Settings" - "Speaker Impedance" and

change the default value "6ohms" to "4ohms".

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1: Connections

When using commercially available banana plugs:

tighten the speaker terminals to the end and then insert the

banana plugs. Do not insert the cable core directly into the

hole for banana plug of speaker terminal. (North American

model)

Network Connection

1/2"-5/8"(12-15 mm)

You can enjoy Internet radio and DLNA by connecting

the unit to LAN. The unit can be connected to the router

with an Ethernet cable or to the wireless LAN router with

Wi-Fi connection. In case of wired connection, connect

the Ethernet cable to the Ethernet port. See "4th Step :

Network Connection" of "Step 2: Setting Up".

Cut and remove the plastic coating from the end of the

speaker cable, twist the core and connect it to the terminal.

Make correct connection between the unit's jacks and

speaker's jacks (+ to + and - to -) for each channel. If

connection is wrong, a bass sound may become poor

due to reverse phase. Attaching the supplied colored

speaker cable labels to the + side on the both ends of

each channel's cable will help correct connection. The

subwoofer jack supports connection of a subwoofer with

built-in power amplifier. Set the cut-off filter selection

switch of the subwoofer to DIRECT. If the subwoofer does

not have a cut-off filter selection switch but has a cut-off

frequency adjusting dial, turn it to the maximum frequency.

If your subwoofer does not have built-in power amplifier,

you can connect a power amplifier between the unit and the

subwoofer.

Internet radio

Other connections

AM/FM Antenna Connections

Connect the antennas to listen to AM/FM broadcast. When

listening to the broadcast for the first time, adjust the

antenna position and orientation to get the best reception.

Router

rꢀ The speaker setting is 7.1 ch at the time of purchase.You

can change it manually or by using automatic speaker

setting.

NAS

AM loop antenna (supplied)

rꢀ Short-circuiting the + cable and - cable or contacting the

cable core to the rear panel of the unit may cause failure.

Also do not connect two or more cables to one speaker

terminal or one speaker to several terminals.

rꢀ Using a speaker with less impedance than the setting

may result in failure.

Headphones Connection

Connect stereo headphones with a standard plug (1/4

inch or ø 6.3 mm) to the PHONES jack on the front panel.

Sound from the speakers will be off while you are using the

headphones.

Indoor FM antenna

(supplied)

rꢀ If you selected any other listening mode than Pure Audio,

Stereo, Mono and Direct, connecting headphones will

switch the listening mode to Stereo.

Fix with a tack on

the wall.

(North American

models)

(European, Australian

and Asian models)

Assemble the AM loop antenna (supplied).

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Up

Step 2:

Important: When the unit is turned on for the first time, the

setup wizard of the section 2 will automatically be launched.

If you use the setup wizard to make the initial setup,

connect a TV to the HDMI OUT MAIN jack of the unit via

HDMI connection.

„

1st Step : AccuEQ Room Calibration

Making the Initial Setup with the Setup

Wizard

The test tone coming from each speaker will be measured to

enable setting of the number of speakers, volume level, each

speaker's optimum crossover frequencies, and distance from

the primary listening position, and also enable correction of

distortion caused by the room acoustic environment.

Read before starting the procedure: Set up by

answering the guidance displayed on the TV screen.

Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection.

To return to the previous screen, press RETURN.

rꢀ If you terminate the procedure on the way or

change the setting made in the initial setup and

want to call up the setup wizard again, press RCV

and then HOME on the remote controller, select

"Setup" - "7.Hardware Setup" - "Initial Setup", and

press ENTER.

Initial Setup

Turning the power on

AccuEQ Room Calibration

This step you can automatically calibrate

your room to get correct surround sound.

Would you like to cailbrate your room now

or later?

Connect the power cord to the outlet. Press ON/

STANDBY on the main unit or RECEIVER on the remote

controller to turn the unit on or to standby mode.

Do it Now

Do it Later

HOME Exit

Initial Setup

Language Select

English

Select the language first. In the next screen, the summary

of the setup wizard as below will be displayed. Select "Yes"

in this screen and press ENTER on the remote controller.

Deutsch

Français

Español

Place the speaker setup microphone.

Italiano

Nederlands

Svenska

When the start screen above is displayed, before

starting the procedure, place the supplied speaker setup

microphone at the measurement position by referring

to the figure below.

HOME Exit

Initial Setup

Welcome to initial setup. Have you connected all the speakers and devices?

Before starting, please connect speakers and sources.

Now, would you like to start initial setup?

1st Step : AccuEQ Room Calibration

2nd Step

3rd Step

4th Step

Source Connection

Remote Mode Setup

Network Connection

¼ꢀ

This unit includes a removable power cord. Connect the power

Yes

cord to AC INLET of the unit and then connect to the outlet. Always

disconnect the outlet side first when disconnecting the power cord.

When the unit is turned on, a large instantaneous current may

flow affecting functionality of the computer and other devices. It is

recommended to use a separate outlet from that for the computer or

such other sensitive devices.

HOME Exit

The setup wizard proceeds in the four steps as below.

„

1st Step : AccuEQ Room Calibration

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection

Firmware update notification: If the unit is connected

via LAN and there is firmware update available, the

"Firmware Update Available" message will appear. To

execute updating, select "Update Now" with the cursor

buttons of the remote controller and press ENTER. When

Listening area

Measurement position

with microphone

¼ꢀ

Correct measurement will not be possible if the microphone is held

by hand. Measurement is not possible if headphones are being used.

"Completed!" appears, press ON/STANDBY on the main

unit to turn the unit into standby mode. Then updating will

be completed.

¼ꢀ

The subwoofer sound may not be detected since it is extremely low

frequencies. Raise the subwoofer volume to around the half of its

maximum volume and make its frequency to the maximum level.

¼ꢀ

A loud test tone will be heard during measurement. Measurement

may be interrupted if there is ambient noise or radio frequency

interference. Close the window and turn off the home appliance and

fluorescent light.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 2: Setting Up

After placing the microphone at the measurement

position, select "Do it Now" with the cursors and

press ENTER.

Connect the microphone to the SETUP MIC jack of

the unit.

If you select "Yes", you will return to the screen of step 2.

If you select "No, Done Checking", you will proceed to

step 5.

About THX playback

THX recommends setting the speakers manually if

you use THX-certified speakers or playing back with

THX listening modes.

rꢀ THX recommends setting the crossover frequency

to “80Hz(THX)” manually.

rꢀ Due to the electrical complexities and the

interaction with the room, you may notice irregular

results when setting the level or distance of each

speaker. If this happens, THX recommends setting

the speakers and the subwoofer manually.

Enabling HDMI Linked Operation and Other

Functions

In the next screen, you can enable the HDMI linked

operation with CEC compliant device, connection with

ARC compatible TV, and HDMI Through function. Select

"Yes" with the cursors to enable them or "No, Done

Checking" to skip, and press ENTER on the remote

controller.

SETUP MIC jack

Select "Yes" with the cursors and press ENTER to

enable the CEC link function or select "No" and

press ENTER to keep it disabled.

Speaker

setup

microphone

When "Please unplug setup microphone." is

displayed, disconnect the microphone.

Source Connection

„

2nd Step : Source Connection

The following CEC-compatible devices are found;

Do you wish to turn on the CEC link?

Integra DHS-8.8

Follow the guidance displayed on the TV screen.

You can check whether or not each input source is

connected correctly.

AccuEQ Room Calibration

Front Speakers Type

Normal

Powered Zone

Subwoofer

When the Source Connection start screen is

displayed, select "Yes, Continue" with the cursors

and press ENTER.

Yes

HOME

Exit

Initial Setup

If you select "Yes", the connection with ARC compatible

TV and HDMI Through function will be set to "Auto" and

enabled.

Set bi-amp only if you use channel amp for each front speaker.

Source Connection

ENTER

Nex t

This step will start to check if the

connections were made correctly.

Would you like to continue?

When the screen above is displayed, set the items with the

cursors on the remote controller. When the cursor is on an

item, the content of the item will be shown on the lower left

of the screen. After setting the items, press ENTER on the

remote controller. Press ENTER also in the next screen,

„

3rd Step : Remote Mode Setup

Yes. Continue

No. Skip

In this step, you can enable operation of the other

components using the remote controller of the unit. When

the Remote Mode Setup start screen is displayed, select

"Yes" with the cursors and press ENTER on the remote

controller. Follow the guidance to select the desired

REMOTE MODE button and in the keyboard screen, enter

the first three characters of the brand name of the device

you are going to program (e.g., "ONK" for ONKYO) and

search for the remote control code. The guidance will also

explain how to set the remote controller.

HOME

Exit

The test tones sound from the connected speakers

and automatic speaker setting starts.

Measurement will be made twice for each speaker. It

takes several minutes to be completed. Keep the room

as quiet as possible during measurement. If any of

the speakers do not produce the test tone, check for

disconnection.

Select the desired input to check the connection and

press ENTER.

Start playback of the selected device. If connection is

correct, video/audio of the input source selected on the

unit will be played.

After checking the connection, select "Yes" with the

cursors and press ENTER.

rꢀ If you select "No" and press ENTER, the error cause

will be displayed. Follow the guidance to remove the

error cause and check the connection again.

When the measurement is completed, the

measurement result is displayed.

W X

Press

on the remote controller to check the

settings. Press ENTER with "Save" selected. In the next

screen showing that "AccuEQ" is "On", press ENTER on

the remote controller.

rꢀ If there is an error message, follow the on-screen

instruction to remove the error cause.

Select "Yes" with the cursors and press ENTER

on the remote controller to check the connection

of other inputs or select "No, Done Checking" and

press ENTER to skip.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 2: Setting Up

Initial Setup

skip password entry, step 3 starts automatically.

rꢀ If you changed the initial setting of the access point

to hide the SSID, see "When the access point is not

displayed".

access point, select "OK" with the cursor buttons and press

ENTER. For how to register the PIN code to the access

point, refer to its instruction manual.

Remote Mode Setup

Preprograming remote will give you control

of other devices from AV receiver remote

Would you like to setup your remote to

Establish connection.

control your devices? This may take while

Select and set the authentication method.

depending on what and how many you have

connected. You can always come back to remote

setup from setup “8-2 Remote Mode Setup”.

The connection process starts and the Wi-Fi indicator

on the left of the unit's display starts flashing. When

connection has been established, the Wi-Fi indicator

changes from flashing to staying lit. If the Wi-Fi indicator

does not stay lit, connection has not been established.

Make the setting again. If "Push Button" does not work,

try "Enter Password".

Wi-Fi Setup

Yes

No. Skip

Select the authentication method.

HOME

Ex it

„

4th Step : Network Connection

Enter Password

Push Button

PIN code

Initial Setup

When the access point is not displayed

Network Connection

Select "Other..." with the

cursor on the remote

controller and press ENTER to display the keyboard

screen. Input the SSID and password. Make the

following settings according to the router setting.

Do you want to connect network connection?

It gives you network services that our AV

receiver support. If you wish to skip this step.

select “No. Skip”.

When the screen above is displayed, select and set one

of the three authentication methods: "Enter Password",

"Push Button" and "PIN code". See below for details of

and how to set each method.

„

WPA/WPA2 method

Select "WPA" or "WPA2" in "Security Method", select

"OK" and press ENTER.

Yes

Enter Password: Enter the password of the access point to

establish connection.

No. Skip

HOME

Ex it

„

WEP method

Select "Enter Password" with the cursor buttons and

press ENTER.

Select "WEP" in "Security Method" and select

"Default Key ID". Then select "OK" and press ENTER.

rꢀ If encryption setting has not been made on the

wireless LAN router, select "None" in "Security

Method", select "OK" and press ENTER.

You can check the network connection and make the Wi-

Fi setting. When the Network Connection start screen is

displayed, select "Yes" with the cursors and press ENTER

on the remote controller. If you select "Wired" in the next

screen, you can view the Ethernet cable connection status.

To make the Wi-Fi setting, select "Wireless", press ENTER

on the remote controller and follow the sections below.

Enter the password ( ) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER.

rꢀ The keyboard screen may be displayed automatically

if the access point device does not have an automatic

setting button.

¼ꢀ

Select "Shift" and press ENTER to toggle between upper and lower

ꢀ

ꢁ

case. Select " " or " " and press ENTER to move the cursor to the

selected direction. Select "Back Space" and press ENTER to delete

the character at the left of the cursor position. To select whether to

„

Exiting the setup wizard

Make the following preparations.

mask the password with " " or display it in plain text, press D on the

After finishing the initial setup, keep "Finished" selected

and press ENTER on the remote controller. Connection and

setting of the unit is now completed. See Step 3 and enjoy

your home theater.

Wi-Fi connection requires an access point such as

remote control. Press + 10 on the remote controller to enable the

"Shift" function and CLR to delete all the input characters.

wireless LAN router ( ). Write down the SSID and

password (key) of the access point if they are shown

in the label of the main body. If the access point has

an automatic setting button (may be called differently

according to the manufacturer), you can set up

without inputting the password. For how to use the

automatic setting button of the access point, refer to

its instruction manual.

If the security method of the access point to be

connected is WEP, select "Default Key ID", select "OK"

and press ENTER.

Push Button: Use the automatic setting button of the

access point to establish connection.

Select "Push Button" with the cursor buttons and press

ENTER.

Hold down the automatic setting button of the access

point for the necessary seconds, select "OK" with the

cursor buttons and press ENTER.

¼ꢀ

The unit supports Wi-Fi connection with 2.4 GHz

access point.

Select the SSID of the access point to be connected

with the cursor buttons and press ENTER.

When the SSID of the access point appears on the TV

screen, select the desired access point.

PIN code: Select this method when the automatic setting

button of the access point is beyond the reach. Select "PIN

code" with the cursor buttons and press ENTER to display

the 8-digit PIN code. Register the displayed PIN code to the

rꢀ If you changed the initial setting of the access point to

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Back

Step 3:

Remote Controller Parts Name

Playing the player and TV

RECEIVER button: Turns the unit on or into standby

mode.

2 RCV button: Switches the remote controller to the

mode for operating this unit.

3 REMOTE MODE/INPUT SELECTOR button: Switches

the input to be played.

4 Cursor buttons and ENTER button: Moves the cursor

and confirms the selection.

z To control the unit:You can control any other device

than this unit if you register the specified remote control

5 Q SETUP button: Displays the Quick Setup menu that

allows you to set the frequently used functions including

input selection and volume adjustment.

6 Listening mode buttons: Allows you to select the

listening mode.

code to

REMOTE MODE. As the remote controller

may be in the remote mode that enables control of other

devices, be sure to press RCV to select the RECEIVER

mode (for controlling this unit) before operating the unit.

7 DIMMER button: Switches the brightness of the display.

Turning the power on

ZONE2 button and ZONE3 button: For use when

Press

RECEIVER on the remote controller to turn

the power on.

the unit is connected with an integrated amplifier in a

separate room and sound is played there.

9 MUTING button: Temporarily mutes audio.

1 z

rꢀ Switch the input on the TV to that assigned to the

unit. Use the TV's remote controller.

VOLUME buttons: Allows you to adjust the volume.

RETURN button: Returns the display to the previous

state.

HOME button: Displays the Home menu that allows you

to make advanced settings and use Internet radio and

DLNA.

Select the input of the unit and start playback on the

player or TV.

rꢀ Press

INPUT SELECTOR to which the desired

player has been assigned. Press TV/CD to play the

TV's sound.You can also use the input selector

buttons on the main unit.

rꢀ Input will automatically be selected if the TV or player

is CEC compliant and connected to the unit with

HDMI cable.

DISPLAY button: Switches the information on the

display.

rꢀ The buttons other than those above are for operating

other devices.

Select the desired listening mode.

Press

listening mode buttons to switch the mode so

that you can enjoy different listening modes. For details

about the listening modes, see "Listening modes" on the

next section.

Adjust the volume with

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Playing Back

"PM Bass": Allows you to keep the clear midrange and

Listening Modes

Listening to AM/FM Radio

effectively enhance the low pitched range.

Select the desired mode by switching and listening actual

sound in different modes. The selectable listening modes

depend on the format of the input signals.

„

Muting Temporarily: Press MUTING on the remote

controller. Press MUTING again to cancel muting.

The Basic Manual explains the method using automatic

tuning. For manual tuning, see the Advanced Manual

(http://www.onkyo.com/manual/txnr838/adv/en.html).

„

Changing the Display Brightness: Press DIMMER on

the remote controller. The display brightness changes each

time you press the button.

MOVIE/TV:You can select a listening mode suitable for

movies and TV programs.

Press TUNER on the main unit several times to

select either "AM" or "FM".

Press TUNING MODE on the unit, so that the "AUTO"

indicator on the display lights.

MUSIC:You can select a listening mode suitable for music.

GAME:You can select a listening mode suitable for games.

THX:You can select a THX listening mode.

„

Changing the Input Display: Press DISPLAY on the

remote controller several times to switch the display of the

main unit in order of:

Press TUNING

on the unit.

The automatic tuning to a radio station starts. Searching

stops when one is tuned. When tuned into a radio

station, the " TUNED " indicator on the display lights.

The "FM STEREO" indicator lights if the radio station is

an FM radio station.

Input source &

volume

PURE AUDIO (main unit only): The display and analog

video circuits are cut off to provide purer sound.

rꢀ For details on the listening modes, see the Advanced

Manual (http://www.onkyo.com/manual/txnr838/adv/

en.html).

Listening mode

Signal format

TUNED

AUTO

"Direct" for playing the input signals as-is

Selecting this mode allows the input signals to be

played as they are. For example, 2 ch signals of music

CD will be played in stereo, 5.1 ch signals in 5.1 ch,

and Dolby Digital signals of blu-ray disc or DVD in the

Dolby Digital sound field according to the specified

number of channels.

FM STEREO

Sampling

frequency

Registering an AM/FM Radio Station

It allows you to register up to 40 of your favorite AM/FM

radio stations.

Input signal

resolution

Other Useful Functions

1. Tune into the AM/FM radio station you want to

„

Playing Video and Audio from Different Sources: It is

2. Press MEMORY on the unit.

Output resolution

possible to play audio and video from different sources. For

example, you can play audio from the CD player and video

from the BD/DVD player. In this case, press BD/DVD and

then TV/CD. Then start playback on the BD/DVD player and

CD player. This function is effective when an input with audio

only has been selected (TV/CD, TUNER or PHONO in the

initial setting).

The preset number on the display flashes.

3. Repeatedly press PRESET

on the unit to select

a number between 1 and 40 while the preset number

is flashing (about 8 seconds).

rꢀ If "Dolby D 5.1" is displayed in signal format, the Dolby

Digital 5.1 ch signals are being input. When listening to

AM/FM radio, the band, frequency and preset number

are displayed.

4. Press MEMORY on the unit again.

When registered, the preset number stops flashing.

To select a preset radio station, press PRESET

QPꢀVJGꢀOCKPꢀWPKVꢀQTꢀ%*ꢀꢅꢆŨꢀQPꢀVJGꢀTGOQVGꢀEQPVTQNNGTꢃ

„

Adjusting Sound Quality: It is possible to enhance

or moderate the low and high pitched ranges of front

speakers. Press TONE on the main unit several times to

select the desired setting from "Bass", "Treble", and "PM

Bass" (Phase Matching Bass), and adjust with +/-.

"Bass": Allows you to enhance or moderate the low

pitched range.

"Treble": Allows you to enhance or moderate the high

pitched range.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Playing Back

rꢀ It may take about a minute until connection is established

when the unit is on since the Bluetooth function takes

some time to start up.

rꢀ If the volume setting on the Bluetooth-enabled device is

low, the sound will not be output from this unit.

rꢀ Due to the characteristics of Bluetooth wireless

technology, the sound produced on this unit may slightly

be behind the sound played on the Bluetooth-enabled

device.

rꢀ Depending on video signals, the picture may not be

properly rendered on the preview thumbnails.

rꢀ 1080p or higher resolution is not supported.

Connecting and playing the Bluetooth-

enabled device

„

Setup:You can change the assignment of input

terminals and input selector buttons and also make various

speaker settings and other advanced settings.

You can wirelessly enjoy music files stored in a smartphone

or other Bluetooth-enabled device. The coverage area is 48

feet (15 meters).

„

Network Service: Select to use Internet radio services

and the DLNA function. When you connect the unit to the

network and press ENTER, the network service screen will

be displayed on the TV. On the TV screen, select the desired

service or music file with the cursors of the remote controller

and press ENTER to confirm and start playback.

Using the Home menu

Internet radio service:You can listen to TuneIn or such

other Internet radio stations registered in advance.

rꢀ The Bluetooth-enabled device needs to support the

A2DP profile.

rꢀ Note that connection is not always guaranteed with all

Bluetooth-enabled devices.

In the Home menu, you can make advanced setup and

use Internet radio and DLNA function. For details on the

operation, see the Advanced Manual (http://www.onkyo.

com/manual/txnr838/adv/en.html).

DLNA :You can play music files stored in the PC or

NAS device connected to the network. Select the server

with the cursors, select the desired music file and press

ENTER to start playback.

After pressing RCV, press HOME on the remote

controller.

Pairing

The Home menu is displayed on the TV screen.You can

also use the HOME button on the main unit.

Home Media:You can play music files in a shared folder

on the PC or NAS device connected to the network.

Select the server with the cursors, select the desired

music file and press ENTER to start playback.

Pairing is necessary when using the Bluetooth-enabled

device for the first time. Before starting the procedure, learn

how to enable the Bluetooth setting function and to connect

with other devices on the Bluetooth-enabled device.

HOME

rꢀ "Network Service" becomes selectable after the network

starts up even if it cannot be selected first. It may take

about a minute to start up.

Press BLUETOOTH on the remote controller.

The unit enters the pairing mode and the BLUETOOTH

indicator starts flashing.

Setup

rꢀ When "Network Service" is selected for the first time,

the "DISCLAIMER" screen will appear on the TV. Select

"Agree" if you agree the content. If you do not agree the

content, you cannot use the network service.

Select the item with the cursor buttons of the

remote controller and press ENTER to confirm your

selection.

While the BLUETOOTH indicator is flashing,

complete connection on the Bluetooth-enabled

device in the nearby area within about 2 minutes.

If the name of this unit is displayed on the Bluetooth-

enabled device's display, select this unit. Paring will be

completed after a short time.

rꢀ If a password is requested, enter "0000".

rꢀ When connecting the unit to any other Bluetooth-

enabled device, start pairing by holding down

BLUETOOTH until the BLUETOOTH indicator starts

flashing. This unit can store the data of up to ten

paired devices.

¼ꢀ

You cannot use the function unless the TV is connected via HDMI

To return to the previous screen, press RETURN. To

return to the Home menu, press HOME.

since selecting "Agree" in the "DISCLAIMER" screen is not possible.

rꢀ Layout of the icons in the "Network Service" top menu

can be changed. Press NET on the remote controller

and press D. Select the source icon with the cursors and

press ENTER, and then select the destination icon and

press ENTER. The positions of the icons are switched

each other.

„

Sleep Timer: Select to turn the unit into standby mode

automatically when the specified time elapses.

„

InstaPrevue: Select to preview videos input from the

HDMI input jacks collectively in a single screen. The screen

has a main window (current input video) and sub windows

(other input videos). To switch the current input, select the

desired sub window with the cursor buttons and press

ENTER.

„

USB: Select "USB" in the TV screen and connect a

USB storage device to the USB port on the front panel. On

the TV screen, select the desired folder or music file with

the cursors of the remote controller and press ENTER to

confirm and start playback.

rꢀ A black sub window is shown for the input with no video

signals.

rꢀ "InstaPrevue" cannot be selected if the video is being

input from HDMI IN 5 or 6 or if there is no signal from the

input currently selected.

Playing Sound of the Bluetooth-enabled Device

rꢀ "USB" becomes selectable after the USB function starts

up even if it cannot be selected first. It may take about a

minute to start up.

If the unit is on and the Bluetooth-enabled device is

connected, the input will be automatically switched to

BLUETOOTH. Play music in this state.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Playing Back

rꢀ The speakers cannot be adjusted if they have been

set to "No" or "None" in "Speaker Configuration".

rꢀ The setting cannot be used in the following cases.

Using Quick Setup menu

–

"Front Speakers Type" is set to "Bi-Amp".

The listening mode being used is not compatible

with surround back speakers, front height

speakers or front wide speakers.

AccuEQ Room Calibration: Disable the sound field

set in the automatic speaker setting. The setting can be

separately set to each input.

In the Quick Setup menu, you can set frequently used

functions including input selection and volume adjustment.

rꢀ This setting cannot be selected if the automatic

speaker setting has not been performed.

rꢀ It cannot be set if headphones are connected or the

listening mode is Pure Audio or Direct.

„

Video:

Press Q SETUP on the remote controller.

The Quick Setup menu is displayed on the connected

TV's screen.

Monitor Out: The video input signals input to the unit

will be converted by the unit when they are output from

the HDMI OUT jack to the TV so that their resolution can

match that of the TV used. Select the HDMI OUT jack to

be used for output.

CBL/SAT

Late Night: Make small sounds to be easily heard. It

is useful when you need to reduce the volume while

watching a movie late night.You can enjoy the effect

on Dolby Digital, Dolby Digital Plus and Dolby TrueHD

sources only.

rꢀ Turning the unit to standby mode will set the setting

to "Off". In case of Dolby TrueHD, the setting will be

set to "Auto".

Input

BD DVD

CBL/SAT

STB DVR

GAME

Audio

Video

Wide Mode:You can set the aspect ratio.

Information

Listening Mode

Picture Mode:You can adjust the image quality.

"Cinema" will automatically adjust the image to be

suitable to watch movie and "Game" suitable to play

game. In "Standard", the resolution will be changed but

the image quality will not be adjusted. In "Custom", you

can adjust the brightness, contrast, hue and saturation

as desired. If you do not adjust the resolution and image

quality, select "Bypass".

AUX

Select the item with the cursor buttons of the

remote controller and press ENTER to confirm your

selection.

Music Optimizer: Improve the quality of the

compressed audio. Playback sound of lossy

compressed files such as MP3 will be improved. The

setting can be separately set to each input.

rꢀ The setting is effective in the signals of 48 kHz or

less. The setting is not effective in the bitstream

signals.

rꢀ To return to the previous screen, press RETURN.

„

Input: Select the input and check the assignment of

input selector buttons.

rꢀ "Wide Mode" and "Picture Mode" can be set only on the

video output from the HDMI OUT MAIN jack.

rꢀ "Video" cannot be selected if the input is "NET", "USB" or

"Bluetooth".

rꢀ It cannot be set if the listening mode is Pure Audio or

Direct.

„

Audio:

A/V Sync: If the video is behind the audio, you can

delay the audio to offset the gap.

rꢀ It cannot be set when audio is played from the TV's

speakers.

rꢀ It cannot be set if the input is "NET", "USB" or

"BLUETOOTH".

„

Information:

Re-EQ, Re-EQ (THX): Adjust the soundtrack that was

processed to enhance its high pitch range, in order to

make it suitable for home theater.

Audio: Displays the audio input source, format, number of

channels, sampling frequency, listening mode, number of

output channels, and other audio information.

rꢀ In Re-EQ, the following listening modes can be used:

Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

Multichannel, DTS, DTS-HD High Resolution Audio,

DTS-HD Master Audio, DTS Express, DSD, Dolby

EX, Dolby PLIIz Height, Dolby PLIIx Movie, DTS

Neo:6 Cinema, and 5.1ch source + DTS Neo:6.

rꢀ In Re-EQ (THX), the following listening modes can

be used: THX Cinema, THX Surround EX, and THX

Select2 Cinema.

Video: Displays the video input source, resolution, signal

format, color tone, 3D information, Aspect, Picture Mode,

output, and other Video information.

rꢀ It cannot be set if the listening mode is Pure Audio or

Direct.

Bass,Treble: Adjust volume of the front speaker.

rꢀ It cannot be set if the listening mode is Pure Audio,

Direct or THX.

Tuner: Displays the band, frequency, preset number, and

other tuner (radio) information.

„

Listening Mode: Select the listening mode from the

Phase Matching Bass: Suppress phase shift in the

midrange to enhance bass sound. Thus smooth and

powerful bass sound can be obtained.

rꢀ It cannot be set if the listening mode is Pure Audio,

Direct or THX.

categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".

rꢀ It cannot be set when audio is played from the TV's

speakers.

Speaker Layout:You can give priority to surround back

speakers, height speakers or wide speakers when they

are all connected.

rꢀ The speakers cannot be selected if they have been

set to "None" in "Speaker Configuration". Also the

setting cannot be changed if any two or more of

surround back speakers, height speakers and wide

speakers are set to "None".

Subwoofer Level, Center Level: Adjust the speaker

level while listening to the sound. The adjustment you

made will be reset to the previous status when you turn

the unit to standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Playing Back

rꢀ In a separate room, you can enjoy sound from an

Outputting Video/Audio to a Separate Room

Using the multi-zone function

external device connected to the HDMI input jack ( 1) or

the analog audio input jacks ( 2) of the unit, sound from

„

a. Connecting a TV in a Separate Room

the "NET", "USB" or "BLUETOOTH" source, and the AM/

FM broadcasting.

You can play video and audio of the HDMI connected

player on the TV in a separate room. With an HDMI cable,

connect between the HDMI OUT ZONE 2 jack of the unit

and the HDMI IN jack of the TV in a separate room.

The function allows you to connect the unit with a TV or

audio equipment placed in a separate room so that you can

enjoy audio and video of the connected equipment even if

you are staying in a different room. It is possible to perform

playback in the main room and a separate room at the

same time, for example by playing the Blu-ray Disc player

in the main room where the unit is placed while playing

Internet radio in a separate room. It is also possible to

perform playback only in a separate room. There are three

methods to configure multi-zone connection as described in

"a" to "c" in the right. Simultaneous playback in all zones is

also possible.

1 Supported by HDMI IN1 to IN4 and AUX INPUT HDMI/MHL jacks.

2 When you connect a CD player or such other player without HDMI

output jack, connect it to the analog audio input jacks of the unit.

Multi-zone output is not possible if the connection is only with digital

optical cable or digital coaxial cable. In case of analog connection,

analog audio output setting may be necessary on the player.

rꢀ As for HDMI input and analog audio input, it is possible

to play the same source or different sources in the main

room and separate room.

rꢀ As for the "NET", "USB" and "BLUETOOTH", you cannot

select different audio sources for the main room and

separate room. For example, if "NET" has been selected

in the main room and then "USB" is selected as playback

source in the separate room, the input in the main room

will change to "USB" accordingly.

rꢀ When listening to AM/FM broadcasting, you cannot

select different stations for the main room and separate

room. Therefore broadcasting of the same station will be

heard in the both rooms.

rꢀ If you play the same HDMI connected player for the main

room and a separate room, the sound field processing

for 2 ch PCM signals will be made in the main room.

Zone 2

Change the setting: Press RCV and then HOME on the

remote controller, select "Setup" - "1.Input/Output Assign" -

"Monitor Out" - "Zone 2 Monitor Out" and set the setting to

"Use".

rꢀ You can view the information of the connected device on

the TV of Zone 2 by pressing DISPLAY during Zone 2

playback.

Main room

rꢀ The CEC link function does not work with the TV in a

separate room.

Zone 2

Zone 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Playing Back

„

Listening to Music in a Separate Room

c. Connecting Speakers in a Separate Room

Performing Multi-zone Playback

It is possible to directly connect the speakers in another

room without an amplifier. Connect the speakers in another

room to the ZONE2 speaker terminals of the unit using

speaker cables. Note that 5.1 ch will be the maximum in the

main room during Zone 2 playback. In a separate room, you

can enjoy sound from an external player connected to the

HDMI input jack or the analog audio input jacks of the unit,

sound from the "NET", "USB" or "BLUETOOTH" source, and

the AM/FM broadcasting.

Press ZONE2 or ZONE3 on the remote controller,

point the remote controller at the remote controller

„

b. Connecting an Integrated Amplifier in a

Separate Room

sensor and press RECEIVER.

It is possible to play 2 ch source in a separate room while

7.1 ch source is being played in the main room. Connect

the ZONE2 LINE OUT jacks or ZONE3 LINE OUT jacks

of the unit and the line-in jacks of the pre-main amplifier

in a separate room with an analog audio (RCA) cable. In

a separate room, you can enjoy sound from an external

player connected to the HDMI input jack or the analog audio

input jacks of the unit, sound from the "NET", "USB" or

"BLUETOOTH" source, and the AM/FM broadcasting.

"Z2" or "Z3" lights on the main unit display and the multi-

zone function is enabled.

Press ZONE2 or ZONE3 again on the remote

controller and press INPUT SELECTOR of the input

to be played in a separate room.

To play the same source in the main room and separate

room, hold down ZONE2 or ZONE3 for approximately

ꢇ|UGEQPFUꢃ

If you turn the unit to standby during multi-zone playback,

the Z2/Z3 indicators are dimmed and the playback

mode is switched to playback in a separate room only.

Performing steps 1 and 2 while the unit is in standby also

switches the playback mode to playback in a separate

room only.

To control on the main unit: Press ZONE2 or ZONE3 and

within 8 seconds, press the input selector button of the input to

be played in a separate room.To play the same source in the

main room and separate room, press ZONE2 or ZONE3 twice.

To turn off the multi-zone function: Press ZONE2 (or

ZONE3) on the remote controller and press RECEIVER.

To control on the main unit, press ZONE2 (or ZONE3) and

within 8 seconds, press OFF.

Zone 2

rꢀ If ZONE 2 or ZONE 3 is on, power consumption during

standby becomes larger than normal.

rꢀ If ZONE 2 or ZONE 3 is turned on when the listening

mode of the main room is Pure Audio, it will automatically

switch to Direct.

rꢀ While ZONE 2 or ZONE 3 is on, the RI linked system

function (interlink between Onkyo components) is disabled.

Change the setting: Press RCV and then HOME on the

remote controller, select "Setup" - "2.Speaker Setup" -

"Speaker Settings" and set "Powered Zone2" to "Yes".

Zone 2

Zone 3

rꢀ Volume can be adjusted with both the unit and the pre-

main amplifier used in a separate room. To adjust it with

the unit, press RCV and then HOME on the remote

controller, select "Setup" - "7.Hardware Setup" - "Multi

Zone" - "Zone 2 Out" or "Zone 3 Out" and set the setting

to "Variable". If you connect a power amplifier, be sure to

make the setting and adjust the volume in the main room.

rꢀ Adjust the volume on this unit. To adjust the volume,

press ZONE2 on the remote controller and adjust with

VOL.

WHOLE HOUSE MODE: If you press WHOLE

HOUSE MODE while playback is being performed in

the main room, the WHOLE HOUSE MODE is turned

on, "Z2" and "Z3" on the display light at the same

time and the playback sources of all the rooms are

switched to the same source at once.

rꢀ WHOLE HOUSE MODE is effective only for playback

of the external player connected to the analog audio

input jacks.

rꢀ This function cannot be used if headphones are

connected or audio is output from the speakers of

the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 6

(European, Australian

and Asian models)

O P Q R S T

Front Panel

DISPLAY button: Switches the information on the

display.

1 Front flap

8 Display

ON/STANDBY button: Turns the unit on or into

9 MASTER VOLUME control and indicator: Allows you

QUICK SETUP button: Displays the Quick Setup menu.

HOME button: Displays the Home menu.

standby mode.

to adjust the volume.

HYBRID STANDBY indicator: Lights if the unit enters

standby mode when the HDMI Through, network

standby or Wakeup from Bluetooth function is enabled.

PHONES jack: Stereo headphones with a standard plug

are connected.

3 PURE AUDIO button and indicator: Switches to the

d c

Cursor buttons,TUNING^{l j}button, PRESET

PURE AUDIO mode.

button and ENTER button: Moves the cursor and

confirms the selection. When listening to AM/FM

broadcasting, tune into the station with TUNING^{l j}or

d c

4 Remote control sensor: Receives signals from the

remote controller.

5 BLUETOOTH indicator: Flashes while pairing with a

Bluetooth-enabled device is in progress and stays lit

when pairing is completed.

ZONE 2 button, ZONE 3 button and OFF button:

Controls the multi-zone function.

select the registered station with PRESET

RETURN button: Returns the display to the previous

TONE and Tone Level buttons: Adjusts the high tone

and low tone.

state.

6 Wi-Fi indicator: Stays lit while the unit is connected to

the wireless LAN router.

7 Input selector buttons: Switches the input to be

played.

MONITOR OUT button: Allows you to select the HDMI

jack to output the video input signals that are input to

the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

DIMMER button (North American models): Switches

the brightness of the display.

2 3

RT/PTY/TP button (European, Australian and Asian

models): Can be used when receiving the station

transmitting text information.

MEMORY button: Registers or deletes a station.

TUNING MODE button: Switches the tuning mode.

USB port: A USB storage device is connected so that

music files stored in it can be played.

Listening mode buttons: Allows you to select the

listening mode.

AUX INPUT HDMI/MHL jacks: An HD video camera or

MHL-enabled mobile device is connected. It is possible

to send video and audio of an MHL-enabled mobile

device.

AUX INPUT AUDIO/VIDEO jacks: A video camera or

such other device is connected.

Display

WHOLE HOUSE MODE button: Controls the WHOLE

HOUSE MODE function to play the same source in all

the multi-zone connected rooms.

SETUP MIC jack: The supplied speaker setup

microphone is connected.

Stays lit or flashes in the following conditions.

"AUTO": Tuning mode is auto.

"fTUNEDe": Receiving AM/FM radio.

rꢀ fe flashes while tuning is automatically performed.

"FM STEREO": Receiving FM stereo.

"RDS" (European, Australian and Asian models):

Receiving RDS broadcasting.

"MUTING": Flashes when audio is temporarily muted by

pressing MUTING on the remote controller

Stays lit in the following conditions.

"SLEEP": Sleep timer has been set.

"ASb" (Auto Standby): Auto Standby is on.

"ch": Channel is being set.

"Hz": Crossover frequencies are being set.

"m/ft": Speaker distances are being set.

"dB": Speaker volume is being set.

Displays various information of the input signals.

Pressing DISPLAY displays the type of input digital

signals and the listening mode.

"Z2" ( ): Zone 2 is on.

"Z3" ( ): Zone 3 is on.

¼ꢀ

Both "Z2" and "Z3" light when the WHOLE HOUSE MODE function is

on.

"HDMI": HDMI signals are input and the HDMI input

selector is selected.

"ARC" (Audio Return Channel): Audio signals are input

from the ARC compatible TV and the TV/CD input

selector is selected.

"3D": Input signals are 3D.

"USB": "USB" input is selected and USB storage device

is connected.

rꢀ It will flash if the USB storage device is not

correctly connected.

"NET": "NET" input is selected and the unit is connected

to the network.

rꢀ It will flash if the connection to the network is not

correct.

"DIGITAL": Digital signals are input and the digital input

selector is selected.

Cursor indicators: NET or USB is controlled.

Stays lit while headphones are connected.

Stays lit while NET or USB is controlled.

Stays lit according to the type of input digital signals and

the listening mode.

Stays lit while Music Optimizer is enabled.

Download from Www.Somanuals.com. All Manuals Search And Download.

12 3

Rear Panel

DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio

signals are input.

GND terminal: The ground wire of the turntable is

connected.

Composite video and analog audio jacks: Analog

video signals and audio signals are input.

MONITOR OUT V jack: Video signals are output to the

connected monitor or TV.

PRE OUT jacks: A power amplifier or subwoofer with

built-in amplifier is connected.

PRE/LINE OUT ZONE2/ZONE3 jacks: Audio output

jacks connected to the pre-main amplifier for multi-zone

playback in a separate room.

SPEAKERS terminals: Speakers are connected. To

use the Multi-zone function, connect the speakers in the

separate room to the ZONE2 speaker terminals.

1 RI REMOTE CONTROL jack: An Onkyo product with RI

jack can be connected and synchronized with this unit.

2 (/ꢀ#06'00#ꢀLCEMꢀꢁꢂꢃꢀŝꢄꢀCPFꢀ#/ꢀ#06'00#ꢀ

terminal: The supplied antennas are connected.

3 COMPONENT VIDEO IN and OUT jacks: Component

video input/output jacks

8 HDMI IN/OUT jacks: Digital video signals and audio

signals are transmitted between the unit and the

connected devices.

9 Wireless antenna: Used for Wi-Fi connection or when

using a Bluetooth-enabled device. Adjust their angles

according to the connection status.

4 ETHERNET port: Used for LAN connection

90°

)

5 RS232 port: Connected to the home control system. (

180°

90°

6 IR jack: Connected to the multiroom remote control kit.

)

(

180°

7 12V TRIGGER OUT jack: Allows you to connect a

device with trigger input jack in a separate room to

enable power link operation between the device and the

unit. (

)

¼ꢀ

Special devices or cable connections are necessary to use the

control functions

information.

to . Contact the specialized stores for more

AC INLET: The power cord is connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

„

HDMI control does not function correctly.

Resetting the unit

Before starting the procedure

rꢀ Set the CEC link function of the unit to on. It is also

necessary to make the HDMI linked system setting on

the TV. See the TV's instruction manual for details.

Problems may be solved by simply turning the power

on/off or disconnecting/connecting the power cord,

which is easier than working on the connection,

setting and operating procedure. Try the simple

measures on both the unit and the connected

device. If the problem is that the video or audio is not

output or the HDMI linked operation does not work,

disconnecting/connecting the HDMI cable may solve

it. When reconnecting, be careful not to wind the

HDMI cable since if wound the HDMI cable may not fit

well. After reconnecting, turn off and on the unit and

the connected device.

Resetting the unit to the status at the time of shipment may

solve the problem. If the measures above do not solve the

problem, reset the unit with the following procedure. If you

reset the unit status, your preferences will be reset to the

defaults. Note them down before starting reset.

The remote controller does not work.

z How to reset:

rꢀ Be sure to press RCV first before operating the unit with

the remote controller.

While holding down CBL/SAT on the main unit (note

that step 2 must be performed with this button

pressed down)

There is no sound for multi-zone function.

Press ON/STANDBY on the main unit ("Clear"

rꢀ When you connect a CD player or such other player

without HDMI output jack, connect it to the analog audio

input jacks of the unit. Multi-zone output is not possible if

the connection is only with digital optical cable or digital

coaxial cable. In case of analog connection, analog audio

output setting may be necessary on the player.

appears on the display and the unit returns to standby)

The AV receiver turns off unexpectedly.

rꢀ The AV receiver will automatically enter standby mode

when Auto Standby is set and launched.

C l e a r

There’s no sound, or it’s very quiet.

Cannot access to network.

rꢀ A wrong input selector button has been selected. Select

a correct input for the player. Also check that muting is

not on.

rꢀ Try plugging/unplugging the unit or the wireless LAN

router or check their power-on status. This will work well

in many cases.

rꢀ If the desired wireless LAN router is not in the access

point list, it may be set to hide SSID or the ANY

connection may be off. Change the setting and try again.

rꢀ Not all listening modes use all speakers.

Press ON/STANDBY.

While holding down

CBL/SAT,

There’s no picture.

rꢀ A wrong input selector button has been selected.

rꢀ Video is not displayed if the listening mode is Pure Audio.

rꢀ To display video from the connected player on the TV

screen while the unit is in standby, you need to enable

HDMI Through function.

rꢀ When the TV image is blurry or unclear, power cord or

connection cables of the unit may have interfered. In

that case, keep distance between TV antenna cable and

cables of the unit.

z How to reset the remote controller:

Bluetooth

While holding down RCV on the remote controller,

press HOME until the remote indicator stays lit

(about 3 seconds)

rꢀ Try plugging/unplugging the unit and the Bluetooth-

enabled player. After that, check that the Bluetooth

function is enabled on the Bluetooth-enabled device and

the connection with the unit has been established.

Within 30 seconds, press RCV again

RCV

Remote

indicator

rꢀ If you connect a player supporting HDCP2.2, be sure to

connect it to the HDMI IN3 jack of the unit. At the time,

connect the TV to the HDMI OUT MAIN jack.

HOME

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

z HDMI

Input

Amplifier Section

Rated Output Power

Network Section

Ethernet LAN

IN1 (BD/DVD, 4K), IN2 (CBL/SAT, 4K), IN3 (STB/DVR, 4K, HDCP2.2), IN4

(GAME, 4K), IN5 (PC), IN6, AUX INPUT (HDMI/MHL) (Front)

Output

OUT MAIN (ARC, HDCP2.2), OUT SUB/ZONE2

Video Resolution

Pass through: 4K 60 Hz (YCbCr 4:2:0)

Upscaling: 4K 30 Hz

Audio Format

All channels: 130 watts minimum continuous power per channel,

8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a

maximum total harmonic distortion of 0.08% (FTC)

(North American)

10BASE-T/100BASE-TX

Wireless LAN

IEEE 802.11 b/g/n standard

(Wi-Fi^®standard)

7 ch × 180 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others)

Maximum Effective Output Power

2.4 GHz band: 1 - 11 ch (North American)

10 - 11 ch (Spain)

7 ch × 215 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian)

10 - 13 ch (France)

Dynamic Power (

)

1 - 13 ch (Others)

IEC60268-Short-term maximum output power

(Wi-Fi^®standard)

DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD,

Dolby Digital Plus, DSD, Multichannel PCM

Supported

¼ꢀ

ꢀ

ꢇꢈꢈꢀ9ꢀꢉꢇꢀŝꢊꢀ(TQPVꢋ

ꢌꢍꢈꢀ9ꢀꢉꢄꢀŝꢊꢀ(TQPVꢋ

3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),

4K (Upscaling and Passthrough)

Bluetooth Section

Communication system

Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate)

Maximum communication range

Line of sight approx. 15 m (

Frequency band

2.4 GHz band (2.4000 GHz - 2.4835 GHz)

Modulation method

ꢁꢍꢈꢀ9ꢀꢉꢎꢀŝꢊꢀ(TQPVꢋ

THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

z Video Inputs

ꢀ

ꢂꢈꢀꢉ(TQPVꢊꢀꢁꢀM*\ꢊꢀꢎꢀŝꢋ

Input Sensitivity and Impedance (Unbalance)

ꢌꢈꢈꢀO8ꢆꢄꢏꢀMŝꢀꢉ.+0'ꢋ

ꢌꢃꢍꢀO8ꢆꢄꢏꢀMŝꢀꢉ2*101ꢀ//ꢋ

Rated RCA Output Level and Impedance

ꢌꢈꢈꢀO8ꢆꢄꢏꢈꢀŝꢀꢉ24'ꢀ176ꢋ

Maximum RCA Output Level and Impedance

ꢄꢃꢂꢀ8ꢆꢄꢏꢈꢀŝꢀꢉ24'ꢀ176ꢋ

Phono Overload

70 mV (MM 1 kHz 0.5% Direct)

Frequency Response

5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)

Tone Control Characteristics

±10 dB, 20 Hz (BASS)

)

Component

IN (CBL/SAT)

Composite

IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), IN4(AUX) (Front)

ꢀ

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

ꢀ

z Video Outputs

Component

OUT

Composite

MONITOR OUT

A2DP 1.2 (Advanced Audio Distribution Profile)

AVRCP 1.3 (Audio Video Remote Control Profile)

Supported Codecs

ꢀ

SBC

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)

¼ꢀ

The actual range will vary depending on factors such as obstacles

z Audio Inputs

between devices, magnetic fields around a microwave oven, static

electricity, cordless phone, reception sensitivity, antenna’s performance,

operating system, software application, etc.

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

Digital

OPTICAL 1 (GAME), 2 (TV/CD)

106 dB (LINE, IHF-A)

COAXIAL 1 (BD/DVD), 2 (CBL/SAT), 3(STB/DVR)

80 dB (PHONO MM, IHF-A)

Speaker Impedance

Analog

General

Power Supply

AC 120 V, 60 Hz (North American)

AC 220 - 240 V, 50/60 Hz (Others)

Power Consumption

BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO, AUX INPUT

(Front)

ꢀ

ꢄꢀŝꢀꢐꢀꢁꢂꢀŝ

Video Section

Audio Outputs

Input Sensitivity/Output Level and Impedance

Analog

8.1 A (North American)

720 W (Others)

0.1 W (Stand-by, North American)

0.2 W (Stand-by, Others)

90 W (No-sound)

ꢀ

ꢁꢀ8RꢐRꢆꢏꢍꢀŝꢀꢉ%QORQPGPVꢀ;ꢋ

ZONE2 PRE/LINE OUT, ZONE3 PRE/LINE OUT

ꢈꢃꢏꢀ8RꢐRꢆꢏꢍꢀŝꢀꢉ%QORQPGPVꢀ2_B/C_B, P_R/C_R)

ꢁꢀ8RꢐRꢆꢏꢍꢀŝꢀꢉ%QORQUKVGꢋ

Analog Multichannel Pre Outputs

FRONT L/ R, CENTER, SURROUND L/R, BACK or HEIGHT or WIDE L/

R, 2 SUBWOOFER PRE OUT

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, –3 dB

Speaker Outputs

Dimensions (W × H × D)

435 mm × 198.5 mm × 400 mm

17-1/8" × 7-13/16" × 15-3/4"

Weight

FRONT L/ R, CENTER, SURROUND L/R, BACK L/R, HEIGHT/Bi-AMP L/

R, WIDE/ZONE2 L/R

Phones

Tuner Section

FM Tuning Frequency Range

87.5 MHz - 107.9 MHz (North American)

87.5 MHz - 108.0 MHz, RDS (Others)

AM Tuning Frequency Range

522/530 kHz - 1611/1710 kHz

Preset Channel

PHONES (Front, ø 6.3)

15.5 kg (34.2 lbs.)

z Others

Setup Mic

1 (Front)

RS232

Ethernet

IR IN

12V TRIGGER OUT ZONE2

USB

1 (Front)

Specifications and features are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

License and Trademark Information

DISCLAIMER

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic,

Surround EX and the double-D symbol are trademarks of Dolby Laboratories.

Through this device you are able to link to other services or websites which

are not under the control of any company which has designed, manufactured

or distributed/have distributed this device, and its affiliates (collectively,

“Company”). We have no control over the nature, content and availability

of those services. The inclusion of any links does not necessarily imply a

recommendation or endorse the views expressed within them.

All information, content and services available through this device belong to

third parties and are protected by copyright, patent, trademark and/or other

intellectual property laws of applicable countries.

The information, content and services provided through this device are for your

personal, noncommercial use only. Any information, content or services may

not be used in any manner other than previously approved by the appropriate

content owner or service provider.

You may not modify, copy, republish, translate, exploit, create derivative works,

upload, post, transmit, sell or distribute in any manner any information, content

or services available through this device, unless expressly permitted by the

appropriate copyright, patent, trademark and/or other intellectual property

owner, including, without limitation, content owner or service provider.

THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE

PROVIDED “AS IS”.

The Wi-Fi CERTIFIED^®Logo is a certification mark of the Wi-Fi Alliance.

Wi-Fi certified^®logo shows international association certifying interoperability

“Wi-Fi alliance” ensures the product has passed the test for compatibility with

other Wi-Fi certified equipment.

For DTS patents, see http://patents.dts.com. Manufactured under license from

DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS-HD Master Audio is a trademark

The Bluetooth^®word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.

Other trademarks and trade names are those of their respective owners.

Onkyo does not guarantee Bluetooth compatibility between the AV receiver and

all Bluetooth-enabled devices.

For compatibility between the AV receiver and another device with Bluetooth

technology, consult the device’s documentation and dealer. In some countries,

there may be restrictions on using Bluetooth devices. Check with your local

authorities.

Qdeo and QuietVideo are trademarks of Marvell or its affiliates.

Re-Equalization and the “Re-EQ” logo are trademarks of THX Ltd.

COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR

SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY

PURPOSE.

COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF

TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.

Company makes no representation or warranty of any kind, express or implied,

about the completeness, accuracy, validity, legality, reliability, suitability or

availability with respect to the information, content or services available through

this device. Company shall not be liable, whether in contract or tort, including

negligence and strict liability, for any direct, indirect, special, incidental or

consequential damages or any other damages arising out of, or in connection

with, any information contained in, or as a result of the use of any content or

service by you or any third party, even if Company has been advised of the

possibility of such damages, nor shall Company be liable for any third party

claims against users of this device or any third party.

In no event shall Company be responsible nor liable for, without limiting the

generality of the foregoing, any interruption or suspension of any information,

content or service available through this device. Company is neither responsible

nor liable for customer service related to the information, content and services

available through this device. Any question or request for service relating to

the information, content or services should be made directly to the appropriate

content owners and services providers.

“MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or

registered trademarks of MHL LLC in the United States and other counties.”

Manufactured under license from THX Ltd. THX and the THX logo are

a trademark of Dolby Laboratories. Used with permission.

U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457

Taiwan Pat. I238671 European Pat. 1,360,874

InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks

of Silicon Image, Inc. in the United States and other countries.

Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and

other countries.

Apple TV is a trademark of Apple Inc., registered in the U.S. and other

countries.

THX Select2 Plus

Before any home theater component can be THX Select2 Plus certified, it

must pass a rigorous series of quality and performance tests. Only then can

a product feature the THX Select2 Plus logo, which is your guarantee that

the Home Theater products you purchase will give you superb performance

for many years to come. THX Select2 Plus requirements define hundreds of

parameters, including power amplifier performance, and pre-amplifier

performance and operation for both digital and analog domains. THX Select2

Plus receivers also feature

SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio

DLNA^®, the DLNA Logo and DLNA CERTIFIED^®are trademarks, service

marks, or certification marks of the Digital Living Network Alliance.

proprietary THX technologies (e.g., THX Mode) which accurately translate

movie soundtracks for home theater

playback.

This product is protected by certain intellectual property rights of Microsoft. Use

or distribution of such technology outside of this product is prohibited without a

license from Microsoft.

AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo

Corporation.

“RIHD” and “RIHD (logo)” are trademarks of Onkyo Corporation.

Windows and the Windows logo are trademarks of the Microsoft group of

companies.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Safari is a trademark or registered trademark of Apple Computer, Inc. in the

United States.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

“x.v.Color” is a trademark of Sony Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and

Thomson.

“Xantech” is a registered trademark of Xantech Corporation.

“Niles” is a registered trademark of Niles Audio Corporation.

“All other trademarks are the property of their respective owners.”

Download from Www.Somanuals.com. All Manuals Search And Download.

–

*ÀTOGFꢀHÒTMNCTCTꢀ1PM[Qꢀ%QTRQTCVKQPꢀCVVꢀFGPPCꢀ6:ꢐ04ꢎꢇꢎꢀHÒNLGTꢀFGꢀ

väsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.

Hér með lýsir Onkyo Corporation því yfir að varan TX-NR838 er í samræmi

XKÌꢀITWPPMTÒHWTꢀQIꢀCÌTCTꢀMTÒHWTꢀUGOꢀIGTÌCTꢀGTWꢀÉꢀVKNUMKRWPꢀꢁꢑꢑꢑꢆꢍꢆ'%ꢃ

Onkyo Corporation erklærer herved at denne TX-NR838 er i

overensstemmelse med vesentlige krav og andre relevante bestemmelser i

direktiv 1999/5/EC.

Precautions

For European Models

Declaration of Conformity

We declare, under our sole responsibility, that

this product complies with the standards:

–

1XKOGꢀ1PM[Qꢀ%QTRQTCVKQPꢊꢀRQVXTîWLGꢀFCꢀLGꢀ6:ꢐ04ꢎꢇꢎꢀWꢀUWINCUPQUVKꢀUCꢀ

osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/EC.

–

Safety

Limits and methods of measurement of

radio disturbance characteristics

–

Limits for harmonic current emissions

Limitation of voltage changes, voltage

fluctuations and flicker

–

RoHS Directive, 2011/65/EU

Hereby, Onkyo Corporation, declares that

this TX-NR838 is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

–ꢀ µꢀÑÄÕÖÒãÝÉÖÒꢁꢀ2QN\Rꢀ&RUSRUDWLRQꢁꢀÈÉÎÏÄÔÌÔÄꢁꢀÛÉꢀ7;ꢂ15ꢃꢄꢃꢀÉꢀÆꢀ

ÕÞÒÖÆÉÖÕÖÆÌÉꢀÕÞÕꢀÕÞÝÉÕÖÆÉÑÌÖÉꢀÌËÌÕÎÆÄÑÌãꢀÌꢀÈÔ×ÇÌÖÉÓÔÌÏÒÊÌÐÌꢀ

ÔÄËÓÒÔÉÈÅÌꢀÑÄꢀ¨ÌÔÉÎÖÌÆÄꢀꢅꢆꢆꢆꢇꢈꢇ(&ꢉ

–

1PM[Qꢀ%QTRQTCVKQPꢀVÉOVQꢀRTQJNCwWLGꢊꢀzGꢀ6:ꢐ04ꢎꢇꢎꢀURNĢWLGꢀ\½MNCFPÉꢀ

RQzCFCXM[ꢀCꢀXwGEJPCꢀRįÉUNWwP½ꢀWUVCPQXGPKꢀ5OøTPKEGꢀꢁꢑꢑꢑꢆꢍꢆ'5ꢃ

Undertegnede Onkyo Corporation erklærer herved, at følgende udstyr TX-

NR838 overholder de væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

–

Hiermit erklärt Onkyo Corporation, dass sich das Gerät TX-NR838 in

Übereinstimmung mit den grundlegenden Anforderungen und den übrigen

einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Käesolevaga kinnitab Onkyo Corporation seadme TX-NR838 vastavust

direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele

teistele asjakohastele sätetele.

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Onkyo Corporation ΔΗΛΩΝΕΙ

ΟΤΙ TX-NR838 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ

ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ

Por la presente, Onkyo Corporation, declara que este TX-NR838 cumple

con los requisitos esenciales y otras exigencias relevantes de la Directiva

1999/5/EC.

Par la présente, Onkyo Corporation déclare que l’appareil TX-NR838 est

conforme aux exigences essentielles et aux autres dispositions pertinentes

de la directive 1999/5/CE.

Con la presente Onkyo Corporation dichiara che questo TX-NR838 è

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite

dalla direttiva 1999/5/CE.

–

#TꢀwQꢀ1PM[Qꢀ%QTRQTCVKQPꢀFGMNCTðꢊꢀMCꢀ6:ꢐ04ꢎꢇꢎꢀCVDKNUVꢀ&KTGMVĈXCUꢀꢁꢑꢑꢑꢆꢍꢆ

'-ꢀDĿVKUMCLÞOꢀRTCUĈDÞOꢀWPꢀEKVKGOꢀCTꢀVQꢀUCKUVĈVCLKGOꢀPQVGKMWOKGOꢃ

Šiuo Onkyo Corporation deklaruoja, kad šis TX-NR838 atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

A Onkyo Corporation ezzennel kijelenti, hogy a TX-NR838 típusú beren-

FG\ÅUꢀVGNLGUÉVKꢀC\ꢀCNCRXGVĩꢀMÒXGVGNOÅP[GMGVꢀÅUꢀO½Uꢀꢁꢑꢑꢑꢆꢍꢆ'-ꢀKT½P[GNXDGPꢀ

OGIJCV½TQ\QVVꢀXQPCVMQ\ÏꢀTGPFGNMG\ÅUGMGVꢃ

–

Hierbij verklaart Onkyo Corporation dat het toestel l TX-NR838 in

overeenstemming is met de essentiële eisen en de andere relevante

bepalingen van richtlijn 1999/5/EG.

0KPKGLU\[Oꢀ1PM[Qꢀ%QTRQTCVKQPꢀFGMNCTWLGꢀŏGꢀ6:ꢐ04ꢎꢇꢎꢀLGUVꢀ\IQFP[ꢀ

\ꢀ\CUCFPKE\[OKꢀY[OCICPKCOKꢀKꢀKPP[OKꢀYĜCıEKY[OKꢀRQUVCPQYKGPKCOKꢀ

Dyrektywy 1999/5/EC.

–

Eu, Onkyo Corporation, declaro que o TX-NR838 cumpre os requisitos

essenciais e outras provisões relevantes da Directiva 1999/5/EC.

2TKPꢀRTG\GPVCꢊꢀ1PM[Qꢀ%QTRQTCVKQPꢊꢀFGENCTàꢀEàꢀCRCTCVWNꢀ6:ꢐ04ꢎꢇꢎꢀGUVGꢀ

ÊPꢀEQPHQTOKVCVGꢀEWꢀEGTKPķGNGꢀGUGPķKCNGꢀĵKꢀEWꢀCNVGꢀRTGXGFGTKꢀRGTVKPGPVGꢀCNGꢀ

Directivei 1999/5/CE.

–

1PM[Qꢀ%QTRQTCVKQPꢀVÙOVQꢀX[JNCUWLGꢊꢀzGꢀ6:ꢐ04ꢎꢇꢎꢀCꢀURĔĢCꢀ\½MNCFPÅꢀ

RQzKCFCXM[ꢀCꢀXwGVM[ꢀRTÉUNWwPÅꢀWUVCPQXGPKCꢀ5OGTPKEGꢀꢁꢑꢑꢑꢆꢍꢆ'5ꢃ

Onkyo Corporation izjavlja, da je ta TX-NR838 v skladu z bistvenimi

\CJVGXCOKꢀKPꢀFTWIKOKꢀTGNGXCPVPKOKꢀFQNQêKNKꢀFKTGMVKXGꢀꢁꢑꢑꢑꢆꢍꢆ'5ꢃ

Onkyo Corporation vakuuttaa täten että TX-NR838 tyyppinen laite on

direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin

muiden ehtojen mukainen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Europe

(Mainland)

Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,

OSAKA 541-0041, JAPAN

http://www.onkyo.com/

1301, 555 Tower, No.555 West NanJing Road, Jing’an District,

Shanghai, China 200041,

Tel: 86-21-52131366 Fax: 86-21-52130396

http://www.cn.onkyo.com/

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4208-213

http://www.eu.onkyo.com/

The Americas

Asia, Oceania, Middle East, Africa

Please contact an Onkyo distributor referring to Onkyo

SUPPORT site.

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

For Dealer, Service, Order and all other Business Inquiries:

Tel: 201-785-2600 Fax: 201-785-2650

Meridien House, Ground ﬂoor, 69 - 71 Clarendon Road,

Watford, Hertfordshire, WD17 1DS, United Kingdom

Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95

http://www.intl.onkyo.com/support/

http://www.us.onkyo.com/

China

The above-mentioned information is subject to change

without prior notice.

Visit the Onkyo web site for the latest update.

(Hong Kong)

For Product Support Team Only:

1-800-229-1687

Unit 1033, 10/F, Star House, No 3, Salisbury Road,

Tsim Sha Tsui Kowloon, Hong Kong.

Tel: 852-2429-3118 Fax: 852-2428-9039

http://www.hk.onkyo.com/

D1405-1

SN 29401752A

* 2 9 4 0 1 7 5 2 A *

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

It De Nl Sv Fi Cs Ar

Step 3: Playing Back

Step 3:㻌㻌෌⏕䛩䜛

＊1 HDMI IN1～4、およびAUX INPUT HDMI/MHLが対応しています。

＊2 CDプレーヤーなど、HDMI出力端子を持たない機器と接続する場合

?ꢀ In

separate room, you can enjoy sound from an

設定が必要です

リモコンのRCVボタンを押したあとに

Outputting Video/Audio to

Separate Room

Using the multi-zone function

external device connected to the HDMI input jack (ꢀ1) or

the analog audio input jacks (ꢀ2) of the unit, sound from

the "NET", "USB" or "BLUETOOTH" source, and the AM/

マルチゾーン機能を使用する

HOMEボタンを押し「、セットアップ」「- 1.入力/出力端子の

割り当て」「- モニター映像出力」「- ゾーン2モニター出力設

は、本機のアナログオーディオ入力端子に接続してください。光デ

ジ

ꢁ

a. Connecting a TV in

You can play video and audio of the HDMI connected

player on the TV in separate room. With an HDMI cable,

connect between the HDMI OUT ZONE jack of the unit

and the HDMI IN jack of the TV in separate room.

Separate Room

タルケーブルや同

軸デジタルケーブルの接続ではマルチゾーン出力

はできません。また、アナログ接続を行った場合、再生機器側でアナ

定」を順に選び「、使用する」に設定してください。

The function allows you to connect the unit with

audio equipment placed in separate room so that you can

enjoy audio and video of the connected equipment even if

you are staying in different room. It is possible to perform

playback in the main room and separate room at the

TV or

本機と別室のテレビやオーディオ機器を接続して、本機に接

続した再生機器などの映像/音声を別室でもお楽しみいただ

ける機能です。本機を設置したメインルームでブルーレイ

FM broadcasting.

HDMI^ロ入^グ力^音お^声出よ^力び^のア^設定ナ^がロ^必グ^要なオ^こー^とデ^{があります。}

ィオ入力の音声は、本機

じソースを聴くこ

ꢀ1 Supported by HDMI IN1 to IN4 and AUX INPUT HDMI/MHL jacks.

ꢀ2 When you connect

ゾーン2再生中にDISPLAYボタンを押すと、ゾーン2の

CD player or such other player without HDMI

テ

レビに接続機器の情報が表示されます。

を設置したメインルームと別室とで同

とも別々のソースを聴くこともできます。

output jack, connect it to the analog audio input jacks of the unit.

Multi-zone output is not possible if the connection is only with digital

optical cable or digital coaxial cable. In case of analog connection,

analog audio output setting may be necessary on the player.

デ

ィスクプレーヤーを再生し、別室でインターネットラジオ

別室のテレビとのCEC連動機能は働きません。

を再生するなどメインルームと別室を同

時

に再生すること

same time, for example by playing the Blu-ray Disc player

in the main room where the unit is placed while playing

「NET」「、USB」「、BLUETOOTH」音声は、メインルームと

別室とでそれぞれ別々に選ぶことはできません。たとえ

ば、メインルームで「NET」入力切換を選んでいるときに

も、別室のみで再生をすることも可能です。マルチゾーン接

続には右記の2とおりの方法があります。なお、すべてのゾー

?ꢀ As for HDMI input and analog audio input, it is possible

to play the same source or different sources in the main

room and separate room.

?ꢀ As for the "NET", "USB" and "BLUETOOTH", you cannot

select different audio sources for the main room and

separate room. For example, if "NET" has been selected

in the main room and then "USB" is selected as playback

source in the separate room, the input in the main room

will change to "USB" accordingly.

?ꢀ When listening to AM/FM broadcasting, you cannot

select different stations for the main room and separate

room. Therefore broadcasting of the same station will be

heard in the both rooms.

別室で音楽を鑑賞する

Internet radio in

perform playback only in

separate room. It is also possible to

separate room. There are three

ンの同

時

再生も可能です。

別室で再生する入力として「USB」を選ぶと、メインルー

ムも自動的に「USB」入力切換に切り換わります。

AM/FM放送をお聴きになる場合、メインルームと別室で

methods to conﬁgure multi-zone connection as described in

"a" to "c" in the right. Simultaneous playback in all zones is

also possible.

■

別室のプリメインアンプを接続する場合

メインルームで7.1ch再生をしながら、別室で2chの音声を

お楽しみいただけます。本機のZONE2 PRE/LINE OUT端

違う放送局

を選ぶことはできません。

同

じ放送局

をそれ

子またはZONE3 PRE/LINE OUT端子と、別室のプリメイン

アンプなどのラインイン端子をオーディオ用ピンケーブル

ぞれの部屋でお聴きいただけます。

メインルームと別室とで、HDMI接続している同

じ再生機

で接続します。別室でお楽しみいただけるソースは、本機の

器を再生する場合は、メインルームの再生は2chPCM信

HDMI入力またはアナログオーディオ入力端子に接続した

号に対する音場処理となります。

外部再生機器「、NET」「、USB」「、BLUETOOTH」「、AM/FM

放送」から選択できます。

別室に映像/音声を出力する

?ꢀ If you play the same HDMI connected player for the main

room and separate room, the sound ﬁeld processing

for ch PCM signals will be made in the main room.

Zone

■

別室のテレビを接続する場合

Step 3: Playing Back

Change the setting: Press RCV and then HOME on the

remote controller, select "ꢁSetup" "1.Input/Output Assign" -

c. Connecting Speakers in

Monitor Out" and set the setting to

HDMI接続した再生機器の映像と音声を、別室のテレビで

楽しむことができます。HDMIケーブルを使用して本機の

HDMI OUT ZONE2端子と別室のテレビのHDMI IN端子を

接続します。

Listening to Music in

Separate Room

Performing Multi-zone Playback

"Monitor Out"

"Use".

"Zone

It is possible to directly connect the speakers in another

room without an ampliﬁer. Connect the speakers in another

room to the ZONE2 speaker terminals of the unit using

speaker cables. Note that 5.1 ch will be the maximum in the

main room during Zone playback. In

メインルーム

ꢁ

1. Press ZONE2 or ZONE3 on the remote controller,

point the remote controller at the remote controller

sensor and press zRECEIVER.

b. Connecting an Integrated Ampliﬁer in

Separate Room

@ꢀ You can view the information of the connected device on

Main room

It is possible to play

ch source in

separ

of the unit and the line-in jacks of the pre-msein

separate room with an analog audio (RCA) cable. In

separate room, you can enjoy sound from an external

nect

tepl

ﬁe

by pressing DISPLAY during Zone

separate room, you

"Z2" or "Z3" lights on the main unit display and the multi-

zone function is enabled.

7.1 ch source is being played in the main

the ZONE2 LINE OUT jacks or ZONE3

can enjoy sound from an external player connected to the

function does not work with the TV in

HDMI input jack or the analog audio input jacks of the unit,

sound from the "NET", "USB" or "BLUETOOTH" source, and

the AM/FM broadcasting.

ゾーン2

2. Press ZONE2 or ZONE3 again on the remote

controller and press INPUT SELECTOR of the input

to be played in

separate room.

Zone

To play the same source in the main room and separate

room, hold down ZONE2 or ZONE3 for approximately

3seconds.

player connected to the HDMI input jack or the analog audio

input jacks of the unit, sound from the "NET", "USB" or

"BLUETOOTH" source, and the AM/FM broadcasting.

ゾーン2

ゾーン3

If you turn the unit to standby during multi-zone playback,

the Z2/Z3 indicators are dimmed and the playback

音量は、本機と別室で使用するプリメインアンプとの両

方で調整することができます。本機で調整する場合は、

リ

ゾーン3

mode is switched to playback in

separate room only.

モコンのRCVボタンを押したあとにHOMEボタンを押

し「、セットアップ」「- 7.ハードウェア設定」「- マルチゾー

ン」「- ゾーン2出力」または「ゾーン3出力」を順に選び、

Performing steps and while the unit is in standby also

別室でお楽しみいただけるソースは、本機のHDMI入力

（＊1）またはアナログオーディオ入力端子（＊2）に接続

した再生機器「、NET」「、USB」「、BLUETOOTH」「、AM/

FM放送」から選択できます。

switches the playback mode to playback in

separate

Zone

room only.

「可変」に設定してください。パワーアンプを接続する場

To control on the main unit: Press ZONE2 or ZONE3 and

within seconds, press the input selector button of the input to

be played in separate room.To play the same source in the

合は、この設定を必ず行い、本機で音量を調整してくださ

い。

ゾーン2

main room and separate room, press ZONE2 or ZONE3 twice.

To turn off the multi-zone function: Press ZONE2 (or

ZONE3) on the remote controller and press zRECEIVER.

To control on the main unit, press ZONE2 (or ZONE3) and

Zone

within

seconds, press OFF.

Change the setting: Press RCV and then HOME on the

remote controller, select "Setup" "2.Speaker Setup"

"Speaker Settings" and set "Powered Zone2" to "Yes".

•

If ZONE or ZONE is on, power consumption during

Zone

standby becomes larger than normal.

If ZONE or ZONE is turned on when the listening

Aꢀ Volume can be adjusted with both the unit and the pre-

main ampliﬁer used in separate room. To adjust it with

the unit, press RCV and then HOME on the remote

controller, select "Setup" "7.Hardware Setup" "Multi

Zone" "Zone Out" or "Zone Out" and set the setting

to "Variable". If you connect power ampliﬁer, be sure to

make the setting and adjust the volume in the main room.

mode of the main room is Pure Audio, it will automatically

•

Adjust the volume on this unit. To adjust the volume,

press ZONE2 on the remote controller and adjust with

VOL.

switch to Direct.

•

While ZONE

or ZONE

is on, the RI linked system

function (interlink between Onkyo components) is disabled.

WHOLE HOUSE MODE: If you press WHOLE

HOUSE MODE while playback is being performed in

the main room, the WHOLE HOUSE MODE is turned

on, "Z2" and "Z3" on the display light at the same

time and the playback sources of all the rooms are

switched to the same source at once.

•

WHOLE HOUSE MODE is effective only for playback

of the external player connected to the analog audio

input jacks.

•

This function cannot be used if headphones are

connected or audio is output from the speakers of

the TV.

English P.14

ꢀꢁ ꢂꢃꢁꢄꢁꢅꢆꢇꢄꢈꢄꢉꢆꢁꢈꢊꢊꢋꢌꢁꢍꢊꢎꢁꢏꢄꢃꢁꢆꢃꢐꢊꢍꢁꢅꢊꢎꢃꢑꢁꢒꢈꢊꢋꢁꢄꢃꢁꢆꢓꢉꢆꢈꢃꢄꢔꢁꢑꢆꢕꢖꢏꢆꢁꢏꢊꢃꢃꢆꢏꢉꢆꢑꢁꢉꢊꢁꢉꢗꢆꢁꢘꢙꢚꢂꢁꢖꢃꢇꢎꢉꢁꢐꢄꢏꢛꢁꢜ ꢝꢞꢁꢊꢈꢁꢉꢗꢆꢁ

Remarks

ꢤꢗꢆꢁꢎꢃꢑꢆꢈꢔꢖꢃꢆꢑꢁ

ꢒꢎꢃꢏꢉꢖꢊꢃꢅꢁꢄꢈꢆꢁ

ꢄꢕꢄꢖꢔꢄꢭꢔꢆꢁꢊꢃꢔꢍꢁꢖꢃꢁ

ꢯꢊꢃꢆꢁꢠꢮ

ꢄꢃꢄꢔꢊꢟꢁꢄꢎꢑꢖꢊꢁꢖꢃꢇꢎꢉꢁꢐꢄꢏꢛꢅꢁꢜ ꢠꢞꢁꢊꢒꢁꢉꢗꢆꢁꢎꢃꢖꢉꢌꢁꢅꢊꢎꢃꢑꢁꢒꢈꢊꢋꢁꢉꢗꢆꢁꢡꢢꢣꢤꢡꢌꢁꢡꢥꢦꢧꢡꢁꢊꢈꢁꢡꢧꢨꢥꢣꢤꢩꢩꢤꢘꢡꢁꢅꢊꢎꢈꢏꢆꢌꢁꢄꢃꢑꢁꢉꢗꢆꢁꢪꢚꢫ

ꢬꢚꢁꢭꢈꢊꢄꢑꢏꢄꢅꢉꢖꢃꢟꢮ

English P.15

ꢂꢃꢁꢄꢁꢅꢆꢇꢄꢈꢄꢉꢆꢁꢈꢊꢊꢋꢌꢁꢍꢊꢎꢁꢏꢄꢃꢁꢆꢃꢐꢊꢍꢁꢅꢊꢎꢃꢑꢁꢒꢈꢊꢋꢁꢄꢃꢁꢆꢓꢉꢆꢈꢃꢄꢔꢁꢇꢔꢄꢍꢆꢈꢁꢏꢊꢃꢃꢆꢏꢉꢆꢑꢁꢉꢊꢁꢉꢗꢆꢁꢘꢙꢚꢂꢁꢖꢃꢇꢎꢉꢁꢐꢄꢏꢛꢁꢊꢈꢁꢉꢗꢆꢁ

ꢄꢃꢄꢔꢊꢟꢁꢄꢎꢑꢖꢊꢁꢖꢃꢇꢎꢉꢁꢐꢄꢏꢛꢅꢁꢊꢒꢁꢉꢗꢆꢁꢎꢃꢖꢉꢌꢁꢅꢊꢎꢃꢑꢁꢒꢈꢊꢋꢁꢉꢗꢆꢁꢡꢢꢣꢤꢡꢌꢁꢡꢥꢦꢧꢡꢁꢊꢈꢁꢡꢧꢨꢥꢣꢤꢩꢩꢤꢘꢡꢁꢅꢊꢎꢈꢏꢆꢌꢁꢄꢃꢑꢁꢉꢗꢆꢁꢪꢚꢫꢬꢚꢁ

ꢭꢈꢊꢄꢑꢏꢄꢅꢉꢖꢃꢟꢮ

Français P.14

Remarques

ꢀꢁ ꢙꢄꢃꢅꢁꢎꢃꢆꢁꢄꢎꢉꢈꢆꢁꢇꢖ`ꢏꢆꢌꢁꢕꢊꢎꢅꢁꢇꢊꢎꢕꢆꢰꢁꢇꢈꢊꢒꢖꢉꢆꢈꢁꢑꢎꢁꢅꢊꢃꢁXꢁꢇꢄꢈꢉꢖꢈꢁꢑꢱꢎꢃꢁꢇaꢈꢖꢇꢗaꢈꢖꢲꢎꢆꢁꢆꢓꢉꢆꢈꢃꢆꢁꢏꢊꢃꢃꢆꢏꢉaꢁXꢁꢔꢄꢁꢇꢈꢖꢅꢆꢁ

ꢨꢆꢅꢁꢒꢊꢃꢏꢉꢖꢊꢃꢅꢁ

ꢅꢊꢎꢔꢖꢟꢃaꢆꢅꢁꢅꢊꢃꢉꢁ

ꢑꢖꢅꢇꢊꢃꢖꢭꢔꢆꢅꢁ

ꢎꢃꢖꢲꢎꢆꢋꢆꢃꢉꢁꢆꢃꢁ

ꢯꢊꢃꢆꢁꢠꢮ

ꢑꢳꢆꢃꢉꢈaꢆꢁꢘꢙꢚꢂꢁꢜ ꢝꢞꢁꢊꢎꢁꢄꢎꢓꢁꢇꢈꢖꢅꢆꢅꢁꢑꢱꢆꢃꢉꢈaꢆꢁꢄꢎꢑꢖꢊꢁꢄꢃꢄꢔꢊꢟꢖꢲꢎꢆꢅꢁꢜ ꢠꢞꢁꢑꢆꢁꢏꢆꢉꢁꢄꢇꢇꢄꢈꢆꢖꢔꢌꢁꢑꢎꢁꢅꢊꢃꢁꢑꢆꢇꢎꢖꢅꢁꢔꢄꢁꢅꢊꢎꢈꢏꢆꢁ

#ꢴꢢꢣꢤꢴ3ꢌꢁ#ꢴꢥꢦꢧꢴ3ꢁꢊꢎꢁ#ꢴꢧꢨꢥꢣꢤꢩꢩꢤꢘꢴ3ꢌꢁꢆꢉꢁꢔꢄꢁꢈꢄꢑꢖꢊꢁꢪꢚꢫꢬꢚꢮ

Français P.15

ꢙꢄꢃꢅꢁꢎꢃꢆꢁꢇꢖ`ꢏꢆꢁꢅaꢇꢄꢈaꢆꢌꢁꢕꢊꢎꢅꢁꢇꢊꢎꢕꢆꢰꢁꢇꢈꢊꢒꢖꢉꢆꢈꢁꢑꢎꢁꢅꢊꢃꢁXꢁꢇꢄꢈꢉꢖꢈꢁꢑꢱꢎꢃꢁꢔꢆꢏꢉꢆꢎꢈꢁꢆꢓꢉꢆꢈꢃꢆꢁꢏꢊꢃꢃꢆꢏꢉaꢁXꢁꢔꢄꢁꢇꢈꢖꢅꢆꢁꢑꢳꢆꢃꢉꢈaꢆꢁ

ꢘꢙꢚꢂꢁꢊꢎꢁꢄꢎꢓꢁꢇꢈꢖꢅꢆꢅꢁꢑꢱꢆꢃꢉꢈaꢆꢁꢄꢎꢑꢖꢊꢁꢄꢃꢄꢔꢊꢟꢖꢲꢎꢆꢅꢁꢑꢆꢁꢔꢳꢄꢇꢇꢄꢈꢆꢖꢔꢌꢁꢑꢎꢁꢅꢊꢃꢁꢑꢆꢇꢎꢖꢅꢁꢔꢄꢁꢅꢊꢎꢈꢏꢆꢁ#ꢴꢢꢣꢤꢴ3ꢌꢁ#ꢴꢥꢦꢧꢴ3ꢁꢊꢎꢁ

#ꢴꢧꢨꢥꢣꢤꢩꢩꢤꢘꢴ3ꢌꢁꢆꢉꢁꢔꢄꢁꢈꢄꢑꢖꢊꢁꢪꢚꢫꢬꢚꢮ

Español P.14

Observaciones

ꢀꢁ ꢣꢃꢁꢎꢃꢄꢁꢗꢄꢭꢖꢉꢄꢏꢖꢵꢃꢁꢅꢆꢇꢄꢈꢄꢑꢄꢌꢁꢇꢎꢆꢑꢆꢁꢑꢖꢅꢒꢈꢎꢉꢄꢈꢁꢑꢆꢁꢅꢊꢃꢖꢑꢊꢁꢑꢆꢅꢑꢆꢁꢎꢃꢁꢑꢖꢅꢇꢊꢅꢖꢉꢖꢕꢊꢁꢆꢓꢉꢆꢈꢃꢊꢁꢏꢊꢃꢆꢏꢉꢄꢑꢊꢁꢄꢔꢁꢏꢊꢃꢆꢏꢉꢊꢈꢁꢑꢆꢁ

ꢨꢄꢅꢁꢒꢎꢃꢏꢖꢊꢃꢆꢅꢁ

ꢅꢎꢭꢈꢄꢍꢄꢑꢄꢅꢁ

ꢆꢅꢉYꢃꢁ

ꢆꢃꢉꢈꢄꢑꢄꢁꢘꢙꢚꢂꢁꢜ ꢝꢞꢁꢊꢁꢔꢊꢅꢁꢏꢊꢃꢆꢏꢉꢊꢈꢆꢅꢁꢑꢆꢁꢆꢃꢉꢈꢄꢑꢄꢁꢑꢆꢁꢄꢎꢑꢖꢊꢁꢄꢃꢄꢔꢵꢟꢖꢏꢊꢁꢜ ꢠꢞꢁꢑꢆꢁꢔꢄꢁꢎꢃꢖꢑꢄꢑꢌꢁꢆꢔꢁꢅꢊꢃꢖꢑꢊꢁꢇꢈꢊꢕꢆꢃꢖꢆꢃꢉꢆꢁ

ꢑꢆꢁꢔꢄꢁꢒꢎꢆꢃꢉꢆꢁꢶꢢꢣꢤꢷꢌꢁꢶꢥꢦꢧꢷꢁꢊꢁꢶꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢌꢁꢍꢁꢔꢄꢁꢆꢋꢖꢅꢖꢵꢃꢁꢪꢚꢫꢬꢚꢮ

ꢑꢖꢅꢇꢊꢃꢖꢭꢔꢆꢅꢁꢅꢵꢔꢊꢁ

ꢆꢃꢁꢔꢄꢁꢯꢊꢃꢄꢁꢠꢮ

Español P.15

ꢣꢃꢁꢎꢃꢄꢁꢗꢄꢭꢖꢉꢄꢏꢖꢵꢃꢁꢅꢆꢇꢄꢈꢄꢑꢄꢌꢁꢇꢎꢆꢑꢆꢁꢑꢖꢅꢒꢈꢎꢉꢄꢈꢁꢑꢆꢁꢅꢊꢃꢖꢑꢊꢁꢑꢆꢅꢑꢆꢁꢎꢃꢁꢈꢆꢇꢈꢊꢑꢎꢏꢉꢊꢈꢁꢆꢓꢉꢆꢈꢃꢊꢁꢏꢊꢃꢆꢏꢉꢄꢑꢊꢁꢄꢔꢁꢏꢊꢃꢆꢏꢉꢊꢈꢁ

ꢑꢆꢁꢆꢃꢉꢈꢄꢑꢄꢁꢘꢙꢚꢂꢁꢊꢁꢔꢊꢅꢁꢏꢊꢃꢆꢏꢉꢊꢈꢆꢅꢁꢑꢆꢁꢆꢃꢉꢈꢄꢑꢄꢁꢑꢆꢁꢄꢎꢑꢖꢊꢁꢄꢃꢄꢔꢵꢟꢖꢏꢊꢁꢑꢆꢁꢔꢄꢁꢎꢃꢖꢑꢄꢑꢌꢁꢆꢔꢁꢅꢊꢃꢖꢑꢊꢁꢇꢈꢊꢕꢆꢃꢖꢆꢃꢉꢆꢁꢑꢆꢁꢔꢄꢁ

ꢒꢎꢆꢃꢉꢆꢶꢢꢣꢤꢷꢌꢁꢶꢥꢦꢧꢷꢁꢊꢁꢶꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢌꢁꢍꢁꢔꢄꢁꢆꢋꢖꢅꢖꢵꢃꢁꢪꢚꢫꢬꢚꢮ

Italiano P.14

Osservazioni

ꢀꢁ ꢂꢃꢁꢎꢃꢄꢁꢅꢉꢄꢃꢰꢄꢁꢅꢆꢇꢄꢈꢄꢉꢄꢌꢁ`ꢁꢇꢊꢅꢅꢖꢭꢖꢔꢆꢁꢟꢊꢑꢆꢈꢆꢁꢑꢆꢔꢁꢅꢎꢊꢃꢊꢁꢑꢆꢈꢖꢕꢄꢃꢉꢆꢁꢑꢄꢁꢎꢃꢁꢑꢖꢅꢇꢊꢅꢖꢉꢖꢕꢊꢁꢆꢅꢉꢆꢈꢃꢊꢁꢏꢊꢃꢃꢆꢅꢅꢊꢁꢄꢔꢁꢐꢄꢏꢛꢁꢑꢖꢁ

ꢨꢆꢁꢒꢎꢃꢰꢖꢊꢃꢖꢁ

ꢅꢊꢉꢉꢊꢔꢖꢃꢆꢄꢉꢆꢁ

ꢅꢊꢃꢊꢁꢑꢖꢅꢇꢊꢃꢖꢭꢖꢔꢖꢁ

ꢅꢊꢔꢊꢁꢖꢃꢁꢯꢊꢃꢆꢁꢠꢮ

ꢖꢃꢟꢈꢆꢅꢅꢊꢁꢘꢙꢚꢂꢁꢜ ꢝꢞꢁꢊꢁꢄꢖꢁꢐꢄꢏꢛꢁꢑꢖꢁꢖꢃꢟꢈꢆꢅꢅꢊꢁꢄꢎꢑꢖꢊꢁꢄꢃꢄꢔꢊꢟꢖꢏꢊꢁꢜ ꢠꢞꢁꢑꢆꢔꢔꢱꢎꢃꢖꢉXꢌꢁꢑꢆꢔꢁꢅꢎꢊꢃꢊꢁꢑꢆꢈꢖꢕꢄꢃꢉꢆꢁꢑꢄꢁꢎꢃꢄꢁꢅꢊꢈꢟꢆꢃꢉꢆꢁ

ꢶꢢꢣꢤꢷꢌꢶꢥꢦꢧꢷꢁꢊꢁꢶꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢌꢁꢆꢁꢑꢆꢔꢔꢆꢁꢉꢈꢄꢅꢋꢖꢅꢅꢖꢊꢃꢖꢁꢖꢃꢁꢪꢚꢫꢬꢚꢮ

Italiano P.15

ꢂꢃꢁꢎꢃꢄꢁꢅꢉꢄꢃꢰꢄꢁꢅꢆꢇꢄꢈꢄꢉꢄꢌꢁ`ꢁꢇꢊꢅꢅꢖꢭꢖꢔꢆꢁꢟꢊꢑꢆꢈꢆꢁꢑꢆꢔꢁꢅꢎꢊꢃꢊꢁꢑꢆꢈꢖꢕꢄꢃꢉꢆꢁꢑꢄꢁꢎꢃꢁꢔꢆꢉꢉꢊꢈꢆꢁꢆꢅꢉꢆꢈꢃꢊꢁꢏꢊꢃꢃꢆꢅꢅꢊꢁꢄꢔꢁꢐꢄꢏꢛꢁꢑꢖꢁꢖꢃꢟꢈꢆꢅꢅꢊꢁ

ꢘꢙꢚꢂꢁꢊꢁꢄꢖꢁꢐꢄꢏꢛꢁꢑꢖꢁꢖꢃꢟꢈꢆꢅꢅꢊꢁꢄꢎꢑꢖꢊꢁꢄꢃꢄꢔꢊꢟꢖꢏꢊꢁꢑꢆꢔꢔꢱꢎꢃꢖꢉXꢌꢁꢑꢆꢔꢁꢅꢎꢊꢃꢊꢁꢑꢆꢈꢖꢕꢄꢃꢉꢆꢁꢑꢄꢁꢎꢃꢄꢁꢅꢊꢈꢟꢆꢃꢉꢆꢁꢶꢢꢣꢤꢷꢌꢁꢶꢥꢦꢧꢷꢁꢊꢁ

ꢶꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢌꢁꢆꢁꢑꢆꢔꢔꢆꢁꢉꢈꢄꢅꢋꢖꢅꢅꢖꢊꢃꢖꢁꢖꢃꢁꢪꢚꢫꢬꢚꢮ

Deutsch P.14

Bemerkungen

ꢀꢁ ꢂꢃꢁꢆꢖꢃꢆꢋꢁꢄꢃꢑꢆꢈꢆꢃꢁꢸꢄꢎꢋꢁꢛꢹꢃꢃꢆꢃꢁꢦꢖꢆꢁꢑꢆꢃꢁꢤꢊꢃꢁꢕꢊꢃꢁꢆꢖꢃꢆꢋꢁꢆꢓꢉꢆꢈꢃꢆꢃꢁꢺꢆꢈ\ꢉꢁꢟꢆꢃꢖꢆWꢆꢃꢌꢁꢑꢄꢅꢁꢋꢖꢉꢁꢑꢆꢈꢁꢘꢙꢚꢂꢻ

ꢙꢖꢆꢁ

ꢣꢖꢃꢟꢄꢃꢟꢅꢭꢎꢏꢗꢅꢆꢁꢜ ꢝꢞꢁꢊꢑꢆꢈꢁꢑꢆꢃꢁꢄꢃꢄꢔꢊꢟꢆꢃꢁꢪꢎꢑꢖꢊꢻꢣꢖꢃꢟꢄꢃꢟꢅꢭꢎꢏꢗꢅꢆꢃꢁꢜ ꢠꢞꢁꢑꢆꢅꢁꢺꢆꢈ\ꢉꢅꢁꢕꢆꢈꢭꢎꢃꢑꢆꢃꢁꢖꢅꢉꢌꢁꢑꢆꢃꢁꢤꢊꢃꢁꢕꢊꢃꢁ

ꢑꢆꢈꢁꢼꢢꢣꢤꢶꢻꢌꢁꢼꢥꢦꢧꢶꢻꢁꢊꢑꢆꢈꢁꢼꢧꢨꢥꢣꢤꢩꢩꢤꢘꢶꢻꢽꢎꢆꢔꢔꢆꢁꢎꢃꢑꢁꢚꢾꢫꢥꢿꢾꢻꢦꢆꢃꢑꢎꢃꢟꢆꢃꢮ

ꢎꢃꢉꢆꢈꢅꢉꢈꢖꢏꢗꢆꢃꢆꢃꢁ

ꢬꢎꢃꢛꢉꢖꢊꢃꢆꢃꢁ

ꢅꢉꢆꢗꢆꢃꢁꢃꢎꢈꢁꢖꢃꢁ

ꢯꢊꢃꢆꢁꢠꢁꢰꢎꢈꢁ

ꣁꢆꢈꢒꣂꢟꢎꢃꢟꢮ

Deutsch P.15

ꢂꢃꢁꢆꢖꢃꢆꢋꢁꢄꢃꢑꢆꢈꢆꢃꢁꢸꢄꢎꢋꢁꢛꢹꢃꢃꢆꢃꢁꢦꢖꢆꢁꢑꢆꢃꢁꢤꢊꢃꢁꢕꢊꢃꢁꢆꢖꢃꢆꢋꢁꢆꢓꢉꢆꢈꢃꢆꢃꢁꣀꢔꢄꢍꢆꢈꢁꢟꢆꢃꢖꢆWꢆꢃꢌꢁꢑꢆꢈꢁꢋꢖꢉꢁꢑꢆꢈꢁꢘꢙꢚꢂꢻ

ꢣꢖꢃꢟꢄꢃꢟꢅꢭꢎꢏꢗꢅꢆꢁꢊꢑꢆꢈꢁꢑꢆꢃꢁꢄꢃꢄꢔꢊꢟꢆꢃꢁꢪꢎꢑꢖꢊꢁꢣꢖꢃꢟꢄꢃꢟꢅꢭꢎꢏꢗꢅꢆꢃꢁꢑꢆꢅꢁꢺꢆꢈ\ꢉꢅꢁꢕꢆꢈꢭꢎꢃꢑꢆꢃꢁꢖꢅꢉꢌꢁꢑꢆꢃꢁꢤꢊꢃꢁꢕꢊꢃꢁꢑꢆꢈꢁꢼꢢꢣꢤꢶꢻꢌꢁ

ꢼꢥꢦꢧꢶꢻꢁꢊꢑꢆꢈꢁꢼꢧꢨꢥꢣꢤꢩꢩꢤꢘꢶꢻꢽꢎꢆꢔꢔꢆꢁꢎꢃꢑꢁꢚꢾꢫꢥꢿꢾꢻꢦꢆꢃꢑꢎꢃꢟꢆꢃꢮ

Download from Www.Somanuals.com. All Manuals Search And Download.

Nederlands P.14

Opmerkingen

ꢀꢁ ꢂꢃꢁꢆꢆꢃꢁꢄꢇꢄꢈꢉꢆꢁꢛꢄꢋꢆꢈꢁꢛꢎꢃꢉꢁꢎꢁꢟꢆꢃꢖꢆꢉꢆꢃꢁꢕꢄꢃꢁꢗꢆꢉꢁꢟꢆꢔꢎꢖꢑꢁꢕꢄꢃꢁꢆꢆꢃꢁꢆꢓꢉꢆꢈꢃꢁꢄꢇꢇꢄꢈꢄꢄꢉꢁꢄꢄꢃꢟꢆꢅꢔꢊꢉꢆꢃꢁꢊꢇꢁꢑꢆꢁꢘꢙꢚꢂꢁ

ꢙꢆꢁ

ꢖꢃꢟꢄꢃꢟꢅꢄꢄꢃꢅꢔꢎꢖꢉꢖꢃꢟꢁꢜ ꢝꢞꢁꢊꢒꢁꢊꢇꢁꢑꢆꢁꢄꢃꢄꢔꢊꢟꢆꢁꢖꢃꢟꢄꢃꢟꢅꢄꢄꢃꢅꢔꢎꢖꢉꢖꢃꢟꢆꢃꢁꢜ ꢠꢞꢁꢕꢄꢃꢁꢑꢆꢁꢎꢃꢖꢉꢌꢁꢟꢆꢔꢎꢖꢑꢁꢕꢄꢃꢁꢑꢆꢁꢼꢢꢣꢤꢻꢷꢌꢁꢼꢥꢦꢧꢻꢷꢁ

ꢊꢃꢑꢆꢈꢅꢉꢈꢆꢆꢇꢉꢆꢁ

ꢒꢎꢃꢏꢉꢖꢆꢅꢁ

ꢊꢒꢁꢼꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢻꢭꢈꢊꢃꢌꢁꢆꢃꢁꢑꢆꢁꢪꢚꢫꢬꢚꢁꢎꢖꢉꢰꢆꢃꢑꢖꢃꢟꢮ

ꢰꢖꢐꢃꢁꢄꢔꢔꢆꢆꢃꢁ

ꢭꢆꢅꢏꢗꢖꢛꢭꢄꢄꢈꢁꢖꢃꢁ

ꢯꢊꢃꢆꢁꢠꢮ

Nederlands P.15

ꢂꢃꢁꢆꢆꢃꢁꢄꢇꢄꢈꢉꢆꢁꢛꢄꢋꢆꢈꢁꢛꢎꢃꢉꢁꢎꢁꢟꢆꢃꢖꢆꢉꢆꢃꢁꢕꢄꢃꢁꢗꢆꢉꢁꢟꢆꢔꢎꢖꢑꢁꢕꢄꢃꢁꢆꢆꢃꢁꢆꢓꢉꢆꢈꢃꢁꢄꢇꢇꢄꢈꢄꢄꢉꢁꢄꢄꢃꢟꢆꢅꢔꢊꢉꢆꢃꢁꢊꢇꢁꢑꢆꢁꢘꢙꢚꢂꢁ

ꢖꢃꢟꢄꢃꢟꢅꢄꢄꢃꢅꢔꢎꢖꢉꢖꢃꢟꢁꢊꢒꢁꢊꢇꢁꢑꢆꢁꢄꢃꢄꢔꢊꢟꢆꢁꢖꢃꢟꢄꢃꢟꢅꢄꢄꢃꢅꢔꢎꢖꢉꢖꢃꢟꢆꢃꢁꢕꢄꢃꢁꢑꢆꢁꢎꢃꢖꢉꢌꢁꢟꢆꢔꢎꢖꢑꢁꢕꢄꢃꢁꢑꢆꢁꢼꢢꢣꢤꢻꢷꢌꢁꢼꢥꢦꢧꢻꢷꢁꢊꢒꢁ

ꢼꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢻꢭꢈꢊꢃꢌꢁꢆꢃꢁꢑꢆꢁꢪꢚꢫꢬꢚꢁꢎꢖꢉꢰꢆꢃꢑꢖꢃꢟꢮ

Svenska P.14

Anmärkningar

ꢀꢁ ꢂꢁꢆꢉꢉꢁꢅꢆꢇꢄꢈꢄꢉꢁꢈꢎꢋꢁꢛꢄꢃꢁꢑꢎꢁꢎꢇꢇꢅꢛꢄꢉꢉꢄꢁꢔꢐꢎꢑꢁꢒꢈ]ꢃꢁꢆꢃꢁꢆꢓꢉꢆꢈꢃꢁꢆꢃꢗꢆꢉꢁꢄꢃꢅꢔꢎꢉꢆꢃꢁꢉꢖꢔꢔꢁꢘꢙꢚꢂꢻꢖꢃꢟ]ꢃꢟꢆꢃꢁꢜ ꢝꢞꢁꢆꢔꢔꢆꢈꢁꢑꢆꢁꢄꢃꢄꢔꢊꢟꢄꢁ

ꢔꢐꢎꢑꢖꢃꢟ]ꢃꢟꢄꢈꢃꢄꢁꢜ ꢠꢞꢁꢇ]ꢁꢆꢃꢗꢆꢉꢆꢃꢌꢁꢔꢐꢎꢑꢁꢒꢈ]ꢃꢁꢛ\ꢔꢔꢊꢈꢃꢄꢁꢷꢢꢣꢤꢷꢌꢁꢷꢥꢦꢧꢷꢌꢁꢆꢔꢔꢆꢈꢁꢷꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢌꢁꢊꢏꢗꢁꢪꢚꢫꢬꢚꢅ\ꢃꢑꢃꢖꢃꢟꢮ

ꢙꢆꢁꢎꢃꢑꢆꢈꢅꢉꢈꢎꢛꢃꢄꢁ

ꢒꢎꢃꢛꢉꢖꢊꢃꢆꢈꢃꢄꢁ

\ꢈꢁꢆꢃꢑꢄꢅꢉꢁ

Svenska P.15

ꢉꢖꢔꢔꢟ\ꢃꢟꢔꢖꢟꢄꢁꢖꢁꢰꢊꢃꢁ

ꢠꢮ

ꢂꢁꢆꢉꢉꢁꢅꢆꢇꢄꢈꢄꢉꢁꢈꢎꢋꢁꢛꢄꢃꢁꢑꢎꢁꢎꢇꢇꢅꢛꢄꢉꢉꢄꢁꢔꢐꢎꢑꢁꢒꢈ]ꢃꢁꢆꢃꢁꢆꢓꢉꢆꢈꢃꢁꢅꢇꢆꢔꢄꢈꢆꢁꢄꢃꢅꢔꢎꢉꢆꢃꢁꢉꢖꢔꢔꢁꢘꢙꢚꢂꢻꢖꢃꢟ]ꢃꢟꢆꢃꢁꢆꢔꢔꢆꢈꢁꢑꢆꢁꢄꢃꢄꢔꢊꢟꢄꢁ

ꢔꢐꢎꢑꢖꢃꢟ]ꢃꢟꢄꢈꢃꢄꢁꢇ]ꢁꢆꢃꢗꢆꢉꢆꢃꢌꢁꢔꢐꢎꢑꢁꢒꢈ]ꢃꢁꢛ\ꢔꢔꢊꢈꢃꢄꢁꢷꢢꢣꢤꢷꢌꢁꢷꢥꢦꢧꢷꢌꢁꢆꢔꢔꢆꢈꢁꢷꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢌꢁꢊꢏꢗꢁꢪꢚꢫꢬꢚꢻꢅ\ꢃꢑꢃꢖꢃꢟꢮ

Suomalainen P.14

Huomautuksia

ꢀꢁ ꣁꢊꢖꢉꢁꢃꢄꢎꢉꢉꢖꢄꢁꢆꢈꢖꢁꢗꢎꢊꢃꢆꢆꢅꢅꢄꢁꢎꢔꢛꢊꢖꢅꢆꢃꢁꢔꢄꢖꢉꢉꢆꢆꢃꢁꢉꢎꢊꢉꢉꢄꢋꢄꢅꢉꢄꢁ\\ꢃꢆꢅꢉ\ꢌꢁꢛꢎꢃꢁꢉ\ꢋ\ꢁꢊꢃꢁꢛꢍꢉꢛꢆꢉꢉꢍꢁꢔꢄꢖꢉꢉꢆꢆꢃꢁꢘꢙꢚꢂꢻ

ꢪꢔꢔꢆꢕꢖꢖꢕꢄꢉꢎꢉꢁ

ꢉꢊꢖꢋꢖꢃꢃꢊꢉꢁꢊꢕꢄꢉꢁ

ꢛ\ꢍꢉꢆꢉꢉ\ꢕꢖꢅꢅ\ꢁ

ꢕꢄꢖꢃꢁ

ꢅꢖꢅ\\ꢃꢋꢆꢃꢊꢊꢃꢁꢜ ꢝꢞꢁꢉꢄꢖꢁꢅꢆꢃꢁꢄꢃꢄꢔꢊꢟꢖꢅꢆꢃꢁ\\ꢃꢆꢃꢁꢅꢖꢅ\\ꢃꢋꢆꢃꢊꢊꢃꢁꢜ ꢠꢞꢌꢁꢅꢄꢋꢊꢖꢃꢁꢛꢎꢖꢃꢁꢷꢢꢣꢤꢷꢻꢌꢁꢷꢥꢦꢧꢷꢻꢁꢉꢄꢖꢁ

ꢷꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢻꢔ\ꢗꢉꢆꢆꢃꢁꢉꢄꢖꢁꢪꢚꢫꢬꢚꢻꢈꢄꢑꢖꢊꢃꢁ\\ꢃꢆꢅꢉ\ꢮ

Suomalainen P.15

ꢕꢍꢹꢗꢍꢛꢛꢆꢆꢔꢔ\ꢁꢠꢮ

ꣁꢊꢖꢉꢁꢃꢄꢎꢉꢉꢖꢄꢁꢔꢄꢖꢉꢉꢆꢆꢃꢁꢘꢙꢚꢂꢉꢎꢔꢊꢔꢖꢖꢉ\ꢃꢉꢹꢖꢗꢖꢃꢁꢉꢄꢖꢁꢄꢃꢄꢔꢊꢟꢖꢅꢆꢃꢁ\\ꢃꢆꢃꢁꢉꢎꢔꢊꢔꢖꢖꢉ\ꢃꢉꢹꢖꢗꢖꢃꢁꢔꢖꢖꢉꢆꢉꢍꢃꢁꢎꢔꢛꢊꢖꢅꢆꢃꢁꢉꢊꢖꢅꢉꢊꢔꢄꢖꢉꢉꢆꢆꢃꢌꢁꢷꢢꢣꢤꢷꢻꢌꢁ

ꢷꢥꢦꢧꢷꢻꢁꢉꢄꢖꢁꢷꢧꢨꢥꢣꢤꢩꢩꢤꢘꢷꢻꢁꢔ\ꢗꢉꢆꢆꢃꢁꢉꢄꢖꢁꢪꢚꢫꢬꢚꢻꢈꢄꢑꢖꢊꢃꢁ\\ꢃꢖꢅꢉ\ꢁꢉꢊꢖꢅꢆꢅꢅꢄꢁꢗꢎꢊꢃꢆꢆꢅꢅꢄꢮ

໛⊼

Ё᭛˄ㅔԧᄫ˅3ꢀꢁꢂ

噝ꢀ೼ऩ⣀᠓䯈Ёˈᙼৃҹሑѿᴹ㞾䖲᥹㟇ᴀᴎ+'0,ꢀ䕧ܹ᥹ষ˄ˆꢁ˅៪῵ᢳ䷇乥䕧ܹ᥹ষ˄ˆꢂ˅ⱘ໪䚼䆒໛ⱘໄ䷇ˈᴹ

㞾Ā1(7āǃĀ86%ā៪Ā%/8(7227+ā⑤ⱘໄ䷇ˈҹঞ$0ꢃ)0ꢀᑓ᪁Ǆ

᠔ᔎ䇗ⱘ

ࡳ

㛑ҙ

೼ =RQHꢀꢂ Ёৃ

⫼Ǆ

Ё᭛˄ㅔԧᄫ˅3ꢀꢁꢃ

೼ऩ⣀᠓䯈Ёˈᙼৃҹሑѿᴹ㞾䖲᥹㟇ᴀᴎ+'0,ꢀ䕧ܹ᥹ষ៪῵ᢳ䷇乥䕧ܹ᥹ষⱘ໪䚼᪁ᬒᴎⱘໄ䷇ˈᴹ㞾Ā1(7āǃ

Ā86%ā៪Ā%/8(7227+ā⑤ⱘໄ䷇ˈҹঞ$0ꢃ)0ꢀᑓ᪁Ǆ

ꢀꢁꢂꢃꢄꢅꢆꢇP.14

ꢀLRꢀ)NꢁQ&Bꢀꢂ(;FNQ.ꢈꢀꢃꢄ＊ꢅꢀ0U=K.ꢉXQ&ꢀ)NꢁQ&ꢀJGꢇꢀ?ꢈ."RꢀBꢎꢀꢃꢆ＊) "#$%ꢀJGꢇꢀ?W" ꢀJꢁXRꢀPE0.Gꢀ0;ꢁRꢀLRꢀ)NꢁQ.ꢈꢀ8.X%XH &ꢀIꢉ#ꢊꢀꢂ0$ꢁ!ꢉRꢀ0N=MꢀPNꢁ ꢀ

.AM/FMꢀꢇꢇ=CꢀO$Lꢀ0(L&/ꢋ&ꢀ).ꢌꢍ&ꢀ2ꢈBꢀꢂCBLUETOOTHCꢀBꢎꢀCUSBCꢀBꢎꢀCNETCꢀ0;ꢁR

).ꢈFꢉR

ꢀ.'XbꢀPXQ&ꢀGꢐ.KNQ&

ꢀPNꢀ ꢑꢀ0F.XRꢀ=(MꢀꢒG

.ꢓꢔꢕꢖꢀꢄ

ꢀꢁꢂꢃꢄꢅꢆꢇP.15

ꢀCNET

ꢀ0;ꢁRꢀLRꢀ)NꢁQ&Bꢀꢂ(;FNQ.ꢈꢀ0U=K.ꢉXQ&ꢀ)NꢁQ&ꢀJGꢇꢀ?ꢈ."RꢀBꢎꢀHDMIꢀJGꢇꢀ?W" ꢀJꢁXRꢀPE0.GꢀJ ꢏRꢀLRꢀ)NꢁQ.ꢈꢀ8.X%XH &ꢀIꢉ#ꢊꢀꢂ0$ꢁ!ꢉRꢀ0N=MꢀPN

.AM/FMꢀꢇꢇ=CꢀO$Lꢀ0(L&/ꢋ&ꢀ).ꢌꢍ&ꢀ2ꢈBꢀꢂCBLUETOOTHCꢀBꢎꢀCUSBCꢀBꢎ

日本語 P.14

お知らせ

•別室でお楽しみいただけるソースは、本機のHDMI入力（＊1）またはアナログオーディオ入力端子（＊2）に接続

下線

部

の機能

した再生機器、「NET」、「USB」、「BLUETOOTH」、「AM/FM放送」から選択できます。

日本語 P.14

別室でお楽しみいただけるソースは、本機のHDMI入力またはアナログオーディオ入力端子に接続した外部再生機けます。

器、「NET」、「USB」、「BLUETOOTH」、「AM/FM放送」から選択できます。

は、ゾーン 2 で

のみお楽しみ頂

D1407-0

SN29355930

* 2 9 3 5 5 9 3 0 *

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Oven H 5981 BP User Manual
MTD Edger 243 600 User Manual
Napoleon Grills Gas Grill 485rsib User Manual
NETGEAR Network Card MA111 v2 User Manual
Nikon Camera Lens 2198 User Manual
Nokia Bluetooth Headset BH 904 User Manual
Omnimount TV Mount CM SHELF User Manual
Optimus Cassette Player 14 1246 User Manual
Panasonic Security Camera BB HNP15A User Manual
Panasonic Video Game Controller AW RP120G User Manual